1 files changed, 0 insertions, 607 deletions

diff --git a/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch b/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch
deleted file mode 100644
index 34341d7f18..0000000000
--- a/package/kernel/mac80211/patches/344-0018-brcmfmac-merge-platform-data-and-module-paramaters.patch
+++ /dev/null
@@ -1,607 +0,0 @@
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 17 Feb 2016 11:27:08 +0100
-Subject: [PATCH] brcmfmac: merge platform data and module paramaters
-
-Merge module parameters and platform data in one struct. This is the
-last step to move to the new platform data per device. Now parameters
-of platform data will be merged with module parameters per device.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
-@@ -109,8 +109,8 @@ int brcmf_sdiod_intr_register(struct brc
- 	u32 addr, gpiocontrol;
- 	unsigned long flags;
- 
--	pdata = sdiodev->pdata;
--	if ((pdata) && (pdata->oob_irq_supported)) {
-+	pdata = &sdiodev->settings->bus.sdio;
-+	if (pdata->oob_irq_supported) {
- 		brcmf_dbg(SDIO, "Enter, register OOB IRQ %d\n",
- 			  pdata->oob_irq_nr);
- 		ret = request_irq(pdata->oob_irq_nr, brcmf_sdiod_oob_irqhandler,
-@@ -177,8 +177,8 @@ int brcmf_sdiod_intr_unregister(struct b
- 
- 	brcmf_dbg(SDIO, "Entering\n");
- 
--	pdata = sdiodev->pdata;
--	if ((pdata) && (pdata->oob_irq_supported)) {
-+	pdata = &sdiodev->settings->bus.sdio;
-+	if (pdata->oob_irq_supported) {
- 		sdio_claim_host(sdiodev->func[1]);
- 		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_SEPINT, 0, NULL);
- 		brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_IENx, 0, NULL);
-@@ -522,7 +522,7 @@ static int brcmf_sdiod_sglist_rw(struct
- 	target_list = pktlist;
- 	/* for host with broken sg support, prepare a page aligned list */
- 	__skb_queue_head_init(&local_list);
--	if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
-+	if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
- 		req_sz = 0;
- 		skb_queue_walk(pktlist, pkt_next)
- 			req_sz += pkt_next->len;
-@@ -629,7 +629,7 @@ static int brcmf_sdiod_sglist_rw(struct
- 		}
- 	}
- 
--	if (sdiodev->pdata && sdiodev->pdata->broken_sg_support && !write) {
-+	if (!write && sdiodev->settings->bus.sdio.broken_sg_support) {
- 		local_pkt_next = local_list.next;
- 		orig_offset = 0;
- 		skb_queue_walk(pktlist, pkt_next) {
-@@ -900,7 +900,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
- 		return;
- 
- 	nents = max_t(uint, BRCMF_DEFAULT_RXGLOM_SIZE,
--		      sdiodev->bus_if->drvr->settings->sdiod_txglomsz);
-+		      sdiodev->settings->bus.sdio.txglomsz);
- 	nents += (nents >> 4) + 1;
- 
- 	WARN_ON(nents > sdiodev->max_segment_count);
-@@ -912,7 +912,7 @@ void brcmf_sdiod_sgtable_alloc(struct br
- 		sdiodev->sg_support = false;
- 	}
- 
--	sdiodev->txglomsz = sdiodev->bus_if->drvr->settings->sdiod_txglomsz;
-+	sdiodev->txglomsz = sdiodev->settings->bus.sdio.txglomsz;
- }
- 
- #ifdef CONFIG_PM_SLEEP
-@@ -1246,8 +1246,8 @@ static int brcmf_ops_sdio_suspend(struct
- 
- 	sdio_flags = MMC_PM_KEEP_POWER;
- 	if (sdiodev->wowl_enabled) {
--		if (sdiodev->pdata->oob_irq_supported)
--			enable_irq_wake(sdiodev->pdata->oob_irq_nr);
-+		if (sdiodev->settings->bus.sdio.oob_irq_supported)
-+			enable_irq_wake(sdiodev->settings->bus.sdio.oob_irq_nr);
- 		else
- 			sdio_flags |= MMC_PM_WAKE_SDIO_IRQ;
- 	}
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
-@@ -43,6 +43,8 @@ enum brcmf_bus_protocol_type {
- 	BRCMF_PROTO_MSGBUF
- };
- 
-+struct brcmf_mp_device;
-+
- struct brcmf_bus_dcmd {
- 	char *name;
- 	char *param;
-@@ -217,7 +219,7 @@ bool brcmf_c_prec_enq(struct device *dev
- void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp);
- 
- /* Indication from bus module regarding presence/insertion of dongle. */
--int brcmf_attach(struct device *dev);
-+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings);
- /* Indication from bus module regarding removal/absence of dongle */
- void brcmf_detach(struct device *dev);
- /* Indication from bus module that dongle should be reset */
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
-@@ -243,14 +243,35 @@ static void brcmf_mp_attach(void)
- 	}
- }
- 
--struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
--						enum brcmf_bus_type bus_type,
--						u32 chip, u32 chiprev)
-+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
-+					       enum brcmf_bus_type bus_type,
-+					       u32 chip, u32 chiprev)
- {
--	struct brcmfmac_sdio_pd *pdata;
-+	struct brcmf_mp_device *settings;
- 	struct brcmfmac_pd_device *device_pd;
-+	bool found;
- 	int i;
- 
-+	brcmf_dbg(INFO, "Enter, bus=%d, chip=%d, rev=%d\n", bus_type, chip,
-+		  chiprev);
-+	settings = kzalloc(sizeof(*settings), GFP_ATOMIC);
-+	if (!settings)
-+		return NULL;
-+
-+	/* start by using the module paramaters */
-+	settings->p2p_enable = !!brcmf_p2p_enable;
-+	settings->feature_disable = brcmf_feature_disable;
-+	settings->fcmode = brcmf_fcmode;
-+	settings->roamoff = !!brcmf_roamoff;
-+#ifdef DEBUG
-+	settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
-+#endif
-+
-+	if (bus_type == BRCMF_BUSTYPE_SDIO)
-+		settings->bus.sdio.txglomsz = brcmf_sdiod_txglomsz;
-+
-+	/* See if there is any device specific platform data configured */
-+	found = false;
- 	if (brcmfmac_pdata) {
- 		for (i = 0; i < brcmfmac_pdata->device_count; i++) {
- 			device_pd = &brcmfmac_pdata->devices[i];
-@@ -259,38 +280,29 @@ struct brcmfmac_sdio_pd *brcmf_get_modul
- 			    ((device_pd->rev == chiprev) ||
- 			     (device_pd->rev == -1))) {
- 				brcmf_dbg(INFO, "Platform data for device found\n");
-+				settings->country_codes =
-+						device_pd->country_codes;
- 				if (device_pd->bus_type == BRCMF_BUSTYPE_SDIO)
--					return &device_pd->bus.sdio;
-+					memcpy(&settings->bus.sdio,
-+					       &device_pd->bus.sdio,
-+					       sizeof(settings->bus.sdio));
-+				found = true;
- 				break;
- 			}
- 		}
- 	}
--	pdata = NULL;
--	brcmf_of_probe(dev, &pdata);
--
--	return pdata;
--}
--
--int brcmf_mp_device_attach(struct brcmf_pub *drvr)
--{
--	drvr->settings = kzalloc(sizeof(*drvr->settings), GFP_ATOMIC);
--	if (!drvr->settings)
--		return -ENOMEM;
--
--	drvr->settings->sdiod_txglomsz = brcmf_sdiod_txglomsz;
--	drvr->settings->p2p_enable = !!brcmf_p2p_enable;
--	drvr->settings->feature_disable = brcmf_feature_disable;
--	drvr->settings->fcmode = brcmf_fcmode;
--	drvr->settings->roamoff = !!brcmf_roamoff;
--#ifdef DEBUG
--	drvr->settings->ignore_probe_fail = !!brcmf_ignore_probe_fail;
--#endif
--	return 0;
-+	if ((bus_type == BRCMF_BUSTYPE_SDIO) && (!found)) {
-+		/* No platform data for this device. In case of SDIO try OF
-+		 * (Open Firwmare) Device Tree.
-+		 */
-+		brcmf_of_probe(dev, &settings->bus.sdio);
-+	}
-+	return settings;
- }
- 
--void brcmf_mp_device_detach(struct brcmf_pub *drvr)
-+void brcmf_release_module_param(struct brcmf_mp_device *module_param)
- {
--	kfree(drvr->settings);
-+	kfree(module_param);
- }
- 
- static int __init brcmf_common_pd_probe(struct platform_device *pdev)
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
-@@ -45,41 +45,30 @@ extern struct brcmf_mp_global_t brcmf_mp
- /**
-  * struct brcmf_mp_device - Device module paramaters.
-  *
-- * @sdiod_txglomsz: SDIO txglom size.
-- * @joinboost_5g_rssi: 5g rssi booost for preferred join selection.
-  * @p2p_enable: Legacy P2P0 enable (old wpa_supplicant).
-  * @feature_disable: Feature_disable bitmask.
-  * @fcmode: FWS flow control.
-  * @roamoff: Firmware roaming off?
-+ * @ignore_probe_fail: Ignore probe failure.
-  * @country_codes: If available, pointer to struct for translating country codes
-+ * @bus: Bus specific platform data. Only SDIO at the mmoment.
-  */
- struct brcmf_mp_device {
--	int	sdiod_txglomsz;
--	int	joinboost_5g_rssi;
--	bool	p2p_enable;
--	int	feature_disable;
--	int	fcmode;
--	bool	roamoff;
--	bool	ignore_probe_fail;
-+	bool		p2p_enable;
-+	unsigned int	feature_disable;
-+	int		fcmode;
-+	bool		roamoff;
-+	bool		ignore_probe_fail;
- 	struct brcmfmac_pd_cc *country_codes;
-+	union {
-+		struct brcmfmac_sdio_pd sdio;
-+	} bus;
- };
- 
--struct brcmfmac_sdio_pd *brcmf_get_module_param(struct device *dev,
--						enum brcmf_bus_type bus_type,
--						u32 chip, u32 chiprev);
--int brcmf_mp_device_attach(struct brcmf_pub *drvr);
--void brcmf_mp_device_detach(struct brcmf_pub *drvr);
--#ifdef DEBUG
--static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
--{
--	return drvr->settings->ignore_probe_fail;
--}
--#else
--static inline bool brcmf_ignoring_probe_fail(struct brcmf_pub *drvr)
--{
--	return false;
--}
--#endif
-+struct brcmf_mp_device *brcmf_get_module_param(struct device *dev,
-+					       enum brcmf_bus_type bus_type,
-+					       u32 chip, u32 chiprev);
-+void brcmf_release_module_param(struct brcmf_mp_device *module_param);
- 
- /* Sets dongle media info (drv_version, mac address). */
- int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
-@@ -1104,7 +1104,7 @@ static int brcmf_inet6addr_changed(struc
- }
- #endif
- 
--int brcmf_attach(struct device *dev)
-+int brcmf_attach(struct device *dev, struct brcmf_mp_device *settings)
- {
- 	struct brcmf_pub *drvr = NULL;
- 	int ret = 0;
-@@ -1126,10 +1126,7 @@ int brcmf_attach(struct device *dev)
- 	drvr->hdrlen = 0;
- 	drvr->bus_if = dev_get_drvdata(dev);
- 	drvr->bus_if->drvr = drvr;
--
--	/* Initialize device specific settings */
--	if (brcmf_mp_device_attach(drvr))
--		goto fail;
-+	drvr->settings = settings;
- 
- 	/* attach debug facilities */
- 	brcmf_debug_attach(drvr);
-@@ -1274,7 +1271,7 @@ fail:
- 		brcmf_net_detach(p2p_ifp->ndev);
- 	drvr->iflist[0] = NULL;
- 	drvr->iflist[1] = NULL;
--	if (brcmf_ignoring_probe_fail(drvr))
-+	if (drvr->settings->ignore_probe_fail)
- 		ret = 0;
- 
- 	return ret;
-@@ -1350,8 +1347,6 @@ void brcmf_detach(struct device *dev)
- 
- 	brcmf_proto_detach(drvr);
- 
--	brcmf_mp_device_detach(drvr);
--
- 	brcmf_debug_detach(drvr);
- 	bus_if->drvr = NULL;
- 	kfree(drvr);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
-@@ -23,7 +23,7 @@
- #include "common.h"
- #include "of.h"
- 
--void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
-+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
- {
- 	struct device_node *np = dev->of_node;
- 	int irq;
-@@ -33,12 +33,8 @@ void brcmf_of_probe(struct device *dev,
- 	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
- 		return;
- 
--	*sdio = devm_kzalloc(dev, sizeof(*sdio), GFP_KERNEL);
--	if (!(*sdio))
--		return;
--
- 	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
--		(*sdio)->drive_strength = val;
-+		sdio->drive_strength = val;
- 
- 	/* make sure there are interrupts defined in the node */
- 	if (!of_find_property(np, "interrupts", NULL))
-@@ -51,7 +47,7 @@ void brcmf_of_probe(struct device *dev,
- 	}
- 	irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
- 
--	(*sdio)->oob_irq_supported = true;
--	(*sdio)->oob_irq_nr = irq;
--	(*sdio)->oob_irq_flags = irqf;
-+	sdio->oob_irq_supported = true;
-+	sdio->oob_irq_nr = irq;
-+	sdio->oob_irq_flags = irqf;
- }
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
-@@ -14,10 +14,9 @@
-  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-  */
- #ifdef CONFIG_OF
--void
--brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio);
-+void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio);
- #else
--static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd **sdio)
-+static void brcmf_of_probe(struct device *dev, struct brcmfmac_sdio_pd *sdio)
- {
- }
- #endif /* CONFIG_OF */
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
-@@ -37,6 +37,8 @@
- #include "pcie.h"
- #include "firmware.h"
- #include "chip.h"
-+#include "core.h"
-+#include "common.h"
- 
- 
- enum brcmf_pcie_state {
-@@ -266,6 +268,7 @@ struct brcmf_pciedev_info {
- 	u16 (*read_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset);
- 	void (*write_ptr)(struct brcmf_pciedev_info *devinfo, u32 mem_offset,
- 			  u16 value);
-+	struct brcmf_mp_device *settings;
- };
- 
- struct brcmf_pcie_ringbuf {
-@@ -1525,16 +1528,16 @@ static void brcmf_pcie_release_resource(
- }
- 
- 
--static int brcmf_pcie_attach_bus(struct device *dev)
-+static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo)
- {
- 	int ret;
- 
- 	/* Attach to the common driver interface */
--	ret = brcmf_attach(dev);
-+	ret = brcmf_attach(&devinfo->pdev->dev, devinfo->settings);
- 	if (ret) {
- 		brcmf_err("brcmf_attach failed\n");
- 	} else {
--		ret = brcmf_bus_start(dev);
-+		ret = brcmf_bus_start(&devinfo->pdev->dev);
- 		if (ret)
- 			brcmf_err("dongle is not responding\n");
- 	}
-@@ -1672,7 +1675,7 @@ static void brcmf_pcie_setup(struct devi
- 	init_waitqueue_head(&devinfo->mbdata_resp_wait);
- 
- 	brcmf_pcie_intr_enable(devinfo);
--	if (brcmf_pcie_attach_bus(bus->dev) == 0)
-+	if (brcmf_pcie_attach_bus(devinfo) == 0)
- 		return;
- 
- 	brcmf_pcie_bus_console_read(devinfo);
-@@ -1716,6 +1719,15 @@ brcmf_pcie_probe(struct pci_dev *pdev, c
- 		goto fail;
- 	}
- 
-+	devinfo->settings = brcmf_get_module_param(&devinfo->pdev->dev,
-+						   BRCMF_BUSTYPE_PCIE,
-+						   devinfo->ci->chip,
-+						   devinfo->ci->chiprev);
-+	if (!devinfo->settings) {
-+		ret = -ENOMEM;
-+		goto fail;
-+	}
-+
- 	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
- 	if (!bus) {
- 		ret = -ENOMEM;
-@@ -1760,6 +1772,8 @@ fail:
- 	brcmf_pcie_release_resource(devinfo);
- 	if (devinfo->ci)
- 		brcmf_chip_detach(devinfo->ci);
-+	if (devinfo->settings)
-+		brcmf_release_module_param(devinfo->settings);
- 	kfree(pcie_bus_dev);
- 	kfree(devinfo);
- 	return ret;
-@@ -1799,6 +1813,8 @@ brcmf_pcie_remove(struct pci_dev *pdev)
- 
- 	if (devinfo->ci)
- 		brcmf_chip_detach(devinfo->ci);
-+	if (devinfo->settings)
-+		brcmf_release_module_param(devinfo->settings);
- 
- 	kfree(devinfo);
- 	dev_set_drvdata(&pdev->dev, NULL);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
-@@ -2442,15 +2442,17 @@ static void brcmf_sdio_bus_stop(struct d
- 
- static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
- {
-+	struct brcmf_sdio_dev *sdiodev;
- 	unsigned long flags;
- 
--	if (bus->sdiodev->oob_irq_requested) {
--		spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
--		if (!bus->sdiodev->irq_en && !atomic_read(&bus->ipend)) {
--			enable_irq(bus->sdiodev->pdata->oob_irq_nr);
--			bus->sdiodev->irq_en = true;
-+	sdiodev = bus->sdiodev;
-+	if (sdiodev->oob_irq_requested) {
-+		spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
-+		if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) {
-+			enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr);
-+			sdiodev->irq_en = true;
- 		}
--		spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
-+		spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
- 	}
- }
- 
-@@ -3394,9 +3396,7 @@ static int brcmf_sdio_bus_preinit(struct
- 					   sizeof(u32));
- 	} else {
- 		/* otherwise, set txglomalign */
--		value = 4;
--		if (sdiodev->pdata)
--			value = sdiodev->pdata->sd_sgentry_align;
-+		value = sdiodev->settings->bus.sdio.sd_sgentry_align;
- 		/* SDIO ADMA requires at least 32 bit alignment */
- 		value = max_t(u32, value, 4);
- 		err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
-@@ -3811,21 +3811,25 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- 		bus->ci = NULL;
- 		goto fail;
- 	}
--	sdiodev->pdata = brcmf_get_module_param(sdiodev->dev,
-+	sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
- 						   BRCMF_BUSTYPE_SDIO,
- 						   bus->ci->chip,
- 						   bus->ci->chiprev);
-+	if (!sdiodev->settings) {
-+		brcmf_err("Failed to get device parameters\n");
-+		goto fail;
-+	}
- 	/* platform specific configuration:
- 	 *   alignments must be at least 4 bytes for ADMA
- 	 */
- 	bus->head_align = ALIGNMENT;
- 	bus->sgentry_align = ALIGNMENT;
--	if (sdiodev->pdata) {
--		if (sdiodev->pdata->sd_head_align > ALIGNMENT)
--			bus->head_align = sdiodev->pdata->sd_head_align;
--		if (sdiodev->pdata->sd_sgentry_align > ALIGNMENT)
--			bus->sgentry_align = sdiodev->pdata->sd_sgentry_align;
--	}
-+	if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT)
-+		bus->head_align = sdiodev->settings->bus.sdio.sd_head_align;
-+	if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT)
-+		bus->sgentry_align =
-+				sdiodev->settings->bus.sdio.sd_sgentry_align;
-+
- 	/* allocate scatter-gather table. sg support
- 	 * will be disabled upon allocation failure.
- 	 */
-@@ -3837,7 +3841,7 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- 	 */
- 	if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
- 	    ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
--	     (sdiodev->pdata && sdiodev->pdata->oob_irq_supported)))
-+	     (sdiodev->settings->bus.sdio.oob_irq_supported)))
- 		sdiodev->bus_if->wowl_supported = true;
- #endif
- 
-@@ -3846,8 +3850,8 @@ brcmf_sdio_probe_attach(struct brcmf_sdi
- 		goto fail;
- 	}
- 
--	if ((sdiodev->pdata) && (sdiodev->pdata->drive_strength))
--		drivestrength = sdiodev->pdata->drive_strength;
-+	if (sdiodev->settings->bus.sdio.drive_strength)
-+		drivestrength = sdiodev->settings->bus.sdio.drive_strength;
- 	else
- 		drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
- 	brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
-@@ -4124,7 +4128,7 @@ struct brcmf_sdio *brcmf_sdio_probe(stru
- 	bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
- 
- 	/* Attach to the common layer, reserve hdr space */
--	ret = brcmf_attach(bus->sdiodev->dev);
-+	ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
- 	if (ret != 0) {
- 		brcmf_err("brcmf_attach failed\n");
- 		goto fail;
-@@ -4228,6 +4232,8 @@ void brcmf_sdio_remove(struct brcmf_sdio
- 			}
- 			brcmf_chip_detach(bus->ci);
- 		}
-+		if (bus->sdiodev->settings)
-+			brcmf_release_module_param(bus->sdiodev->settings);
- 
- 		kfree(bus->rxbuf);
- 		kfree(bus->hdrbuf);
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
-@@ -184,7 +184,7 @@ struct brcmf_sdio_dev {
- 	struct brcmf_sdio *bus;
- 	struct device *dev;
- 	struct brcmf_bus *bus_if;
--	struct brcmfmac_sdio_pd *pdata;
-+	struct brcmf_mp_device *settings;
- 	bool oob_irq_requested;
- 	bool irq_en;			/* irq enable flags */
- 	spinlock_t irq_en_lock;
---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
-@@ -27,6 +27,8 @@
- #include "debug.h"
- #include "firmware.h"
- #include "usb.h"
-+#include "core.h"
-+#include "common.h"
- 
- 
- #define IOCTL_RESP_TIMEOUT		msecs_to_jiffies(2000)
-@@ -171,6 +173,7 @@ struct brcmf_usbdev_info {
- 	struct urb *bulk_urb; /* used for FW download */
- 
- 	bool wowl_enabled;
-+	struct brcmf_mp_device *settings;
- };
- 
- static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
-@@ -1027,6 +1030,9 @@ static void brcmf_usb_detach(struct brcm
- 
- 	kfree(devinfo->tx_reqs);
- 	kfree(devinfo->rx_reqs);
-+
-+	if (devinfo->settings)
-+		brcmf_release_module_param(devinfo->settings);
- }
- 
- 
-@@ -1136,7 +1142,7 @@ static int brcmf_usb_bus_setup(struct br
- 	int ret;
- 
- 	/* Attach to the common driver interface */
--	ret = brcmf_attach(devinfo->dev);
-+	ret = brcmf_attach(devinfo->dev, devinfo->settings);
- 	if (ret) {
- 		brcmf_err("brcmf_attach failed\n");
- 		return ret;
-@@ -1223,6 +1229,14 @@ static int brcmf_usb_probe_cb(struct brc
- 	bus->wowl_supported = true;
- #endif
- 
-+	devinfo->settings = brcmf_get_module_param(bus->dev, BRCMF_BUSTYPE_USB,
-+						   bus_pub->devid,
-+						   bus_pub->chiprev);
-+	if (!devinfo->settings) {
-+		ret = -ENOMEM;
-+		goto fail;
-+	}
-+
- 	if (!brcmf_usb_dlneeded(devinfo)) {
- 		ret = brcmf_usb_bus_setup(devinfo);
- 		if (ret)