diff options
Diffstat (limited to 'openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch')
| -rw-r--r-- | openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch | 7282 |
1 files changed, 0 insertions, 7282 deletions
diff --git a/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch b/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch deleted file mode 100644 index fd99ed745c..0000000000 --- a/openwrt/package/net-snmp/patches/500-debian-subset-5.1.2-6.1.patch +++ /dev/null @@ -1,7282 +0,0 @@ -diff -ruN net-snmp-5.1.2-orig/EXAMPLE-trap.conf net-snmp-5.1.2-5/EXAMPLE-trap.conf ---- net-snmp-5.1.2-orig/EXAMPLE-trap.conf 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/EXAMPLE-trap.conf 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,18 @@ -+############################################################################### -+# -+# EXAMPLE.conf: -+# An example configuration file for configuring the ucd-snmp snmptrapd agent. -+# -+############################################################################### -+# -+# This file is intended to only be an example. If, however, you want -+# to use it, it should be placed in /etc/snmp/snmptrapd.conf. -+# When the snmptrapd agent starts up, this is where it will look for it. -+# -+# All lines beginning with a '#' are comments and are intended for you -+# to read. All other lines are configuration commands for the agent. -+ -+# -+# PLEASE: read the snmptrapd.conf(5) manual page as well! -+# -+ -diff -ruN net-snmp-5.1.2-orig/EXAMPLE.conf.def net-snmp-5.1.2-5/EXAMPLE.conf.def ---- net-snmp-5.1.2-orig/EXAMPLE.conf.def 2003-02-25 15:04:06.000000000 +0100 -+++ net-snmp-5.1.2-5/EXAMPLE.conf.def 2005-03-13 16:17:21.000000000 +0100 -@@ -6,7 +6,7 @@ - ############################################################################### - # - # This file is intended to only be an example. If, however, you want --# to use it, it should be placed in SYSCONFDIR/share/snmp/snmpd.conf. -+# to use it, it should be placed in /etc/snmp/snmpd.conf. - # When the snmpd agent starts up, this is where it will look for it. - # - # You might be interested in generating your own snmpd.conf file using -@@ -58,31 +58,37 @@ - # from): - - # sec.name source community --com2sec local localhost COMMUNITY --com2sec mynetwork NETWORK/24 COMMUNITY -+com2sec paranoid default public -+#com2sec readonly default public -+#com2sec readwrite default private - - #### - # Second, map the security names into group names: - - # sec.model sec.name --group MyRWGroup v1 local --group MyRWGroup v2c local --group MyRWGroup usm local --group MyROGroup v1 mynetwork --group MyROGroup v2c mynetwork --group MyROGroup usm mynetwork -+group MyROSystem v1 paranoid -+group MyROSystem v2c paranoid -+group MyROSystem usm paranoid -+group MyROGroup v1 readonly -+group MyROGroup v2c readonly -+group MyROGroup usm readonly -+group MyRWGroup v1 readwrite -+group MyRWGroup v2c readwrite -+group MyRWGroup usm readwrite - - #### - # Third, create a view for us to let the groups have rights to: - - # incl/excl subtree mask - view all included .1 80 -+view system included .iso.org.dod.internet.mgmt.mib-2.system - - #### - # Finally, grant the 2 groups access to the 1 view with different - # write permissions: - - # context sec.model sec.level match read write notif -+access MyROSystem "" any noauth exact system none none - access MyROGroup "" any noauth exact all none none - access MyRWGroup "" any noauth exact all all none - -@@ -100,8 +106,8 @@ - # value of an object whose value is given here will fail with an error - # status of notWritable. - --syslocation Right here, right now. --syscontact Me <me@somewhere.org> -+syslocation Unknown (configure /etc/snmp/snmpd.local.conf) -+syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf) - - # Example output of snmpwalk: - # % snmpwalk -v 1 -c public localhost system -@@ -135,13 +141,13 @@ - # - - # Make sure mountd is running --proc mountd -+#proc mountd - - # Make sure there are no more than 4 ntalkds running, but 0 is ok too. --proc ntalkd 4 -+#proc ntalkd 4 - - # Make sure at least one sendmail, but less than or equal to 10 are running. --proc sendmail 10 1 -+#proc sendmail 10 1 - - # A snmpwalk of the prTable would look something like this: - # -@@ -199,7 +205,7 @@ - # ARGS: optional arguments to be passed to the program - - # a simple hello world --exec echotest /bin/echo hello world -+#exec echotest /bin/echo hello world - - # Run a shell script containing: - # -@@ -250,7 +256,7 @@ - - # Check the / partition and make sure it contains at least 10 megs. - --disk / 10000 -+#disk / 10000 - - # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.DISKMIBNUM - # enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 -@@ -279,7 +285,7 @@ - # 15MAX: Similar, but for 15 min average. - - # Check for loads: --load 12 14 14 -+#load 12 14 14 - - # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.LOADAVEMIBNUM - # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 -@@ -365,7 +371,7 @@ - # (commented out here since it requires that you place the - # script in the right location. (its not installed by default)) - --# pass .EXTENSIBLEDOTMIB.255 /bin/sh PREFIX/local/passtest -+# pass .EXTENSIBLEDOTMIB.255 /bin/sh /usr/local/passtest - - # % snmpwalk -v 1 -c public localhost .EXTENSIBLEDOTMIB.255 - # enterprises.ucdavis.255.1 = "life the universe and everything" -diff -ruN net-snmp-5.1.2-orig/FAQ net-snmp-5.1.2-5/FAQ ---- net-snmp-5.1.2-orig/FAQ 2004-08-07 10:02:45.000000000 +0200 -+++ net-snmp-5.1.2-5/FAQ 2005-03-13 16:17:21.000000000 +0100 -@@ -104,7 +104,7 @@ - I don't understand the new access control stuff - what does it mean? - How do I configure SNMPv3 users? - The 'createUser' line disappears when I start the agent. Why? -- What's the difference between /var/ucd-snmp and /usr/local/share/snmp? -+ What's the difference between /var/ucd-snmp and /usr/share/snmp? - My new agent is ignoring the old snmpd.conf file. Why? - Why am I getting "Connection refused"? - I'm getting errors about "bad security model" - why? -@@ -620,7 +620,7 @@ - - Firstly, - -- cp MY-MIB.txt /usr/local/share/snmp/mibs -+ cp MY-MIB.txt /usr/share/snmp/mibs - - or - -@@ -639,7 +639,7 @@ - Note that you need *both* steps. - The first command copies the file defining the new MIB to a - expected location for MIB files. This defaults to -- /usr/local/share/snmp/mibs (or PREFIX/share/snmp/mibs if the the -+ /usr/share/snmp/mibs (or PREFIX/share/snmp/mibs if the the - suite was installed into a different base location). Some - ready-packaged distributions (such as Linux RPM packages) may look - for MIB files in a different location, such as /etc/snmp/mibs - put -@@ -1111,7 +1111,7 @@ - If this is the case, then you can specify this interpreter - explicitly as part of the trap handle directive: - -- traphandle default /usr/bin/perl /usr/local/bin/log_it -+ traphandle default /usr/bin/perl /usr/bin/log_it - - Note that in this case, it's almost certain that you'll also - need to give the full path to the traphandle script (as shown) -@@ -1263,7 +1263,7 @@ - (if appropriate) the community string to use. - - Some of these (such as the MIB file location), might belong in a -- shared snmp.conf file (typically /usr/local/share/snmp/snmp.conf or -+ shared snmp.conf file (typically /usr/share/snmp/snmp.conf or - /etc/snmp/snmp.conf) to apply to all users of the system. Others - (particularly the SNMPv3 security settings), are more likely to refer - to a particular user, and should go in a personal snmp.conf file -@@ -1522,7 +1522,7 @@ - - - Alternatively, the tools may be looking in the wrong place. -- The default location for the mib files is /usr/local/share/snmp/mibs. -+ The default location for the mib files is /usr/share/snmp/mibs. - Again, this is set when the suite is first configured and compiled. - This can be changed using the environmental variable 'MIBDIRS' - or the snmp.conf directive 'mibdirs'. -@@ -2507,11 +2507,11 @@ - - - --What's the difference between /var/ucd-snmp and /usr/local/share/snmp? -+What's the difference between /var/ucd-snmp and /usr/share/snmp? - --------------------------------------------------------------------- - - Most "static" agent configuration should go in the traditional location -- (typically /usr/local/share/snmp/snmpd.conf or /etc/snmp). The -+ (typically /usr/share/snmp/snmpd.conf or /etc/snmp). The - /var/ucd-snmp (or /var/net-snmp) location is used for information set during - the running of the agent, which needs to be persistent between one run of - the agent and the next. -@@ -2531,7 +2531,7 @@ - distribution), with the current release installed from the source. - - The default location for this file with the basic distribution is -- /usr/local/share/snmp/snmpd.conf (or PREFIX/share/snmp/snmpd.conf). -+ /usr/share/snmp/snmpd.conf (or PREFIX/share/snmp/snmpd.conf). - Ready-installed versions often look for the file as /etc/snmpd.conf, - or /etc/snmp/snmpd.conf. Try moving the old config file to the new - location, and restart the agent. -diff -ruN net-snmp-5.1.2-orig/Makefile.in net-snmp-5.1.2-5/Makefile.in ---- net-snmp-5.1.2-orig/Makefile.in 2004-08-04 14:48:14.000000000 +0200 -+++ net-snmp-5.1.2-5/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -163,6 +163,11 @@ - ( cd perl ; $(MAKE) clean ) ; \ - fi - -+perlrealclean: -+ @if test -f perl/Makefile; then \ -+ ( cd perl ; $(MAKE) realclean ) ; \ -+ fi -+ - # - # make distclean completely removes all traces of building including - # any files generated by configure itself. -diff -ruN net-snmp-5.1.2-orig/Makefile.rules net-snmp-5.1.2-5/Makefile.rules ---- net-snmp-5.1.2-orig/Makefile.rules 2004-02-13 23:42:28.000000000 +0100 -+++ net-snmp-5.1.2-5/Makefile.rules 2005-03-13 16:17:21.000000000 +0100 -@@ -301,7 +301,7 @@ - # cleaning targets - # - clean: cleansubdirs $(OTHERCLEANTODOS) -- rm -f core ${OBJS} ${LOBJS} $(STANDARDCLEANTARGETS) $(OTHERCLEANTARGETS) -+ rm -f -- core ${OBJS} ${LOBJS} $(STANDARDCLEANTARGETS) $(OTHERCLEANTARGETS) - rm -rf .libs - - cleansubdirs: -diff -ruN net-snmp-5.1.2-orig/Makefile.top net-snmp-5.1.2-5/Makefile.top ---- net-snmp-5.1.2-orig/Makefile.top 2004-08-07 09:29:36.000000000 +0200 -+++ net-snmp-5.1.2-5/Makefile.top 2005-03-13 16:17:21.000000000 +0100 -@@ -27,6 +27,7 @@ - snmplibdir = $(datadir)/snmp - mibdir = $(snmplibdir)/mibs - persistentdir = @PERSISTENT_DIRECTORY@ -+sysconfdir = @sysconfdir@ - INSTALL_PREFIX = @INSTALL_PREFIX@ - - # -diff -ruN net-snmp-5.1.2-orig/acconfig.h net-snmp-5.1.2-5/acconfig.h ---- net-snmp-5.1.2-orig/acconfig.h 2004-06-28 20:54:17.000000000 +0200 -+++ net-snmp-5.1.2-5/acconfig.h 2005-03-13 16:17:21.000000000 +0100 -@@ -560,6 +560,9 @@ - /* define if you have getservbyname */ - #undef HAVE_GETSERVBYNAME - -+/* define if you have dlopen */ -+#undef HAVE_DLOPEN -+ - /* printing system */ - #undef HAVE_LPSTAT - #undef LPSTAT_PATH -diff -ruN net-snmp-5.1.2-orig/acinclude.m4 net-snmp-5.1.2-5/acinclude.m4 ---- net-snmp-5.1.2-orig/acinclude.m4 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/acinclude.m4 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,193 @@ -+dnl @synopsis AC_PROMPT_USER_NO_DEFINE(VARIABLENAME,QUESTION,[DEFAULT]) -+dnl -+dnl Asks a QUESTION and puts the results in VARIABLENAME with an optional -+dnl DEFAULT value if the user merely hits return. -+dnl -+dnl @version 1.15 -+dnl @author Wes Hardaker <hardaker@users.sourceforge.net> -+dnl -+AC_DEFUN([AC_PROMPT_USER_NO_DEFINE], -+dnl changequote(<<, >>) dnl -+dnl << -+[ -+if test "x$defaults" = "xno"; then -+echo $ac_n "$2 ($3): $ac_c" -+read tmpinput -+if test "$tmpinput" = "" -a "$3" != ""; then -+ tmpinput="$3" -+fi -+eval $1=\"$tmpinput\" -+else -+tmpinput="$3" -+eval $1=\"$tmpinput\" -+fi -+] -+dnl >> -+dnl changequote([, ]) -+) dnl done AC_PROMPT_USER -+ -+dnl @synopsis AC_PROMPT_USER(VARIABLENAME,QUESTION,[DEFAULT],QUOTED) -+dnl -+dnl Asks a QUESTION and puts the results in VARIABLENAME with an optional -+dnl DEFAULT value if the user merely hits return. Also calls -+dnl AC_DEFINE_UNQUOTED() on the VARIABLENAME for VARIABLENAMEs that should -+dnl be entered into the config.h file as well. If QUOTED is "quoted" then -+dnl the result will be defined within quotes. -+dnl -+dnl @version 1.15 -+dnl @author Wes Hardaker <hardaker@users.sourceforge.net> -+dnl -+AC_DEFUN([AC_PROMPT_USER], -+[ -+MSG_CHECK=`echo "$2" | tail -1` -+AC_CACHE_CHECK($MSG_CHECK, ac_cv_user_prompt_$1, -+[echo "" >&AC_FD_MSG -+AC_PROMPT_USER_NO_DEFINE($1,[$2],$3) -+eval ac_cv_user_prompt_$1=\$$1 -+echo $ac_n "setting $MSG_CHECK to... $ac_c" >&AC_FD_MSG -+]) -+if test "$ac_cv_user_prompt_$1" != "none"; then -+ if test "x$4" = "xquoted" -o "x$4" = "xQUOTED"; then -+ AC_DEFINE_UNQUOTED($1,"$ac_cv_user_prompt_$1") -+ else -+ AC_DEFINE_UNQUOTED($1,$ac_cv_user_prompt_$1) -+ fi -+fi -+]) dnl -+ -+dnl @synopsis AC_CHECK_STRUCT_FOR(INCLUDES,STRUCT,MEMBER,DEFINE,[no]) -+dnl -+dnl Checks STRUCT for MEMBER and defines DEFINE if found. -+dnl -+dnl @version 1.15 -+dnl @author Wes Hardaker <hardaker@users.sourceforge.net> -+dnl -+AC_DEFUN(AC_CHECK_STRUCT_FOR,[ -+ -+ac_safe_struct=`echo "$2" | sed 'y%./+-%__p_%'` -+ac_safe_member=`echo "$3" | sed 'y%./+-%__p_%'` -+ac_safe_all="ac_cv_struct_${ac_safe_struct}_has_${ac_safe_member}" -+changequote(, )dnl -+ ac_uc_define=STRUCT_`echo "${ac_safe_struct}_HAS_${ac_safe_member}" | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` -+changequote([, ])dnl -+ -+AC_MSG_CHECKING([for $2.$3]) -+AC_CACHE_VAL($ac_safe_all, -+[ -+if test "x$4" = "x"; then -+ defineit="= 0" -+elif test "x$4" = "xno"; then -+ defineit="" -+else -+ defineit="$4" -+fi -+AC_TRY_COMPILE([ -+$1 -+],[ -+struct $2 testit; -+testit.$3 $defineit; -+], eval "${ac_safe_all}=yes", eval "${ac_safe_all}=no" ) -+]) -+ -+if eval "test \"x$`echo ${ac_safe_all}`\" = \"xyes\""; then -+ AC_MSG_RESULT(yes) -+ AC_DEFINE_UNQUOTED($ac_uc_define) -+else -+ AC_MSG_RESULT(no) -+fi -+ -+]) -+ -+dnl AC_CHECK_IFNET_FOR(SUBSTRUCT,[no]) -+AC_DEFUN(AC_CHECK_IFNET_FOR,[ -+dnl check for $1 in struct ifnet -+AC_CHECK_STRUCT_FOR([ -+#ifdef IFNET_NEEDS_KERNEL -+#define _KERNEL 1 -+#endif -+#include <sys/types.h> -+#include <sys/socket.h> -+#ifdef HAVE_SYS_TIME_H -+#include <sys/time.h> -+#endif -+#include <net/if.h> -+#ifdef HAVE_NET_IF_VAR_H -+#include <net/if_var.h> -+#endif -+#ifdef HAVE_SYS_QUEUE_H -+#include <sys/queue.h> -+#endif -+#ifdef linux -+struct ifnet { -+ char *if_name; /* name, e.g. "en" or "lo" */ -+ short if_unit; /* sub-unit for lower level driver */ -+ short if_mtu; /* maximum transmission unit */ -+ short if_flags; /* up/down, broadcast, etc. */ -+ int if_metric; /* routing metric (external only) */ -+ char if_hwaddr [6]; /* ethernet address */ -+ int if_type; /* interface type: 1=generic, -+ 28=slip, ether=6, loopback=24 */ -+ int if_speed; /* interface speed: in bits/sec */ -+ -+ struct sockaddr if_addr; /* interface's address */ -+ struct sockaddr ifu_broadaddr; /* broadcast address */ -+ struct sockaddr ia_subnetmask; /* interface's mask */ -+ -+ struct ifqueue { -+ int ifq_len; -+ int ifq_drops; -+ } if_snd; /* output queue */ -+ int if_ibytes; /* octets received on interface */ -+ int if_ipackets; /* packets received on interface */ -+ int if_ierrors; /* input errors on interface */ -+ int if_iqdrops; /* input queue overruns */ -+ int if_obytes; /* octets sent on interface */ -+ int if_opackets; /* packets sent on interface */ -+ int if_oerrors; /* output errors on interface */ -+ int if_collisions; /* collisions on csma interfaces */ -+/* end statistics */ -+ struct ifnet *if_next; -+}; -+#endif -+], ifnet, $1, $2) -+]) -+ -+dnl -+dnl Add a search path to the LIBS and CFLAGS variables -+dnl -+AC_DEFUN(AC_ADD_SEARCH_PATH,[ -+ if test "x$1" != x -a -d $1; then -+ if test -d $1/lib; then -+ LDFLAGS="-L$1/lib $LDFLAGS" -+ fi -+ if test -d $1/include; then -+ CPPFLAGS="-I$1/include $CPPFLAGS" -+ fi -+ fi -+]) -+ -+dnl -+dnl Store information for displaying later. -+dnl -+AC_DEFUN(AC_MSG_CACHE_INIT,[ -+ rm -f configure-summary -+]) -+ -+AC_DEFUN(AC_MSG_CACHE_ADD,[ -+ cat >> configure-summary << EOF -+ $1 -+EOF -+]) -+ -+AC_DEFUN(AC_MSG_CACHE_DISPLAY,[ -+ echo "" -+ echo "---------------------------------------------------------" -+ echo " Net-SNMP configuration summary:" -+ echo "---------------------------------------------------------" -+ echo "" -+ cat configure-summary -+ echo "" -+ echo "---------------------------------------------------------" -+ echo "" -+]) -+ -diff -ruN net-snmp-5.1.2-orig/agent/Makefile.in net-snmp-5.1.2-5/agent/Makefile.in ---- net-snmp-5.1.2-orig/agent/Makefile.in 2003-10-14 15:30:48.000000000 +0200 -+++ net-snmp-5.1.2-5/agent/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -82,7 +82,7 @@ - # libnetsnmpagent objects - LIBAGENTOBJS=snmp_agent.o snmp_vars.o agent_read_config.o \ - agent_registry.o agent_index.o agent_trap.o kernel.o \ -- agent_handler.o @OTHERAGENTLIBOBJS@ -+ agent_handler.o @OTHERAGENTLIBOBJS@ @WRAPLIBS@ - LLIBAGENTOBJS=snmp_agent.lo snmp_vars.lo agent_read_config.lo \ - agent_registry.lo agent_index.lo agent_trap.lo kernel.lo \ - agent_handler.lo @OTHERAGENTLIBLOBJS@ -@@ -120,11 +120,11 @@ - - - libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION): ${LLIBAGENTOBJS} libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) -- $(LIB_LD_CMD) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBAGENTOBJS} $(LIB_LD_LIBS) -+ $(LIB_LD_CMD) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBAGENTOBJS} $(LIB_LD_LIBS) $(AGENT_RELINK_LIBS) - $(RANLIB) libnetsnmpagent.$(LIB_EXTENSION)$(LIB_VERSION) - - libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION): ${LMIBOBJS} -- $(LIB_LD_CMD) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) ${LMIBOBJS} $(LIB_LD_LIBS) -+ $(LIB_LD_CMD) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) ${LMIBOBJS} $(LIB_LD_LIBS) $(MIBS_RELINK_LIBS) $(LIBSENSORS) - $(RANLIB) libnetsnmpmibs.$(LIB_EXTENSION)$(LIB_VERSION) - - embedperlinstall: -diff -ruN net-snmp-5.1.2-orig/agent/helpers/Makefile.in net-snmp-5.1.2-5/agent/helpers/Makefile.in ---- net-snmp-5.1.2-orig/agent/helpers/Makefile.in 2004-03-01 06:26:12.000000000 +0100 -+++ net-snmp-5.1.2-5/agent/helpers/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -68,5 +68,5 @@ - all: standardall - - libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION): ${LOBJS} -- $(LIB_LD_CMD) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) ${LOBJS} $(LIB_LD_LIBS) -+ $(LIB_LD_CMD) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) ${LOBJS} $(LIB_LD_LIBS) $(HELPERS_RELINK_LIBS) - $(RANLIB) libnetsnmphelpers.$(LIB_EXTENSION)$(LIB_VERSION) -diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/agentx/protocol.h net-snmp-5.1.2-5/agent/mibgroup/agentx/protocol.h ---- net-snmp-5.1.2-orig/agent/mibgroup/agentx/protocol.h 2002-04-20 09:30:01.000000000 +0200 -+++ net-snmp-5.1.2-5/agent/mibgroup/agentx/protocol.h 2005-03-13 16:17:21.000000000 +0100 -@@ -10,7 +10,7 @@ - */ - - #define AGENTX_PORT 705 --#define AGENTX_SOCKET "/var/agentx/master" -+#define AGENTX_SOCKET "/var/run/agentx" - - /* - * AgentX versions -diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/mibII/interfaces.c net-snmp-5.1.2-5/agent/mibgroup/mibII/interfaces.c ---- net-snmp-5.1.2-orig/agent/mibgroup/mibII/interfaces.c 2004-07-23 02:55:41.000000000 +0200 -+++ net-snmp-5.1.2-5/agent/mibgroup/mibII/interfaces.c 2005-03-13 16:17:21.000000000 +0100 -@@ -1512,14 +1512,28 @@ - struct ifreq ifrq; - struct ifnet **ifnetaddr_ptr; - FILE *devin; -- unsigned long rec_pkt, rec_oct, rec_err, rec_drop; -- unsigned long snd_pkt, snd_oct, snd_err, snd_drop, coll; - int i, fd; - conf_if_list *if_ptr; -+#ifdef SCNuMAX -+ uintmax_t rec_pkt, rec_oct, rec_err, rec_drop, rec_mcast; -+ uintmax_t snd_pkt, snd_oct, snd_err, snd_drop, coll; -+ const char *scan_line_2_2 = -+ "%" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX -+ " %*" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX -+ " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %" SCNuMAX -+ " %*" SCNuMAX " %" SCNuMAX; -+ const char *scan_line_2_0 = -+ "%" SCNuMAX " %" SCNuMAX " %*" SCNuMAX " %*" SCNuMAX -+ " %*" SCNuMAX " %" SCNuMAX " %" SCNuMAX " %*" SCNuMAX -+ " %*" SCNuMAX " %" SCNuMAX; -+#else -+ unsigned long rec_pkt, rec_oct, rec_err, rec_drop; -+ unsigned long snd_pkt, snd_oct, snd_err, snd_drop, coll; - const char *scan_line_2_2 = - "%lu %lu %lu %lu %*lu %*lu %*lu %*lu %lu %lu %lu %lu %*lu %lu"; - const char *scan_line_2_0 = - "%lu %lu %*lu %*lu %*lu %lu %lu %*lu %*lu %lu"; -+#endif - const char *scan_line_to_use; - struct timeval et; /* elapsed time */ - -@@ -1598,6 +1612,10 @@ - struct ifnet *nnew; - char *stats, *ifstart = line; - -+ /* Ignore interfaces with no statistics. */ -+ if (strstr(line, "No statistics available.")) -+ continue; -+ - if (line[strlen(line) - 1] == '\n') - line[strlen(line) - 1] = '\0'; - -@@ -1631,7 +1649,7 @@ - &coll) != 5)) { - if ((scan_line_to_use == scan_line_2_2) - && !strstr(line, "No statistics available")) -- snmp_log(LOG_ERR, -+ snmp_log(LOG_DEBUG, - "/proc/net/dev data format error, line ==|%s|", - line); - continue; -diff -ruN net-snmp-5.1.2-orig/agent/mibgroup/smux/smux.c net-snmp-5.1.2-5/agent/mibgroup/smux/smux.c ---- net-snmp-5.1.2-orig/agent/mibgroup/smux/smux.c 2004-02-04 12:25:20.000000000 +0100 -+++ net-snmp-5.1.2-5/agent/mibgroup/smux/smux.c 2005-03-13 16:17:21.000000000 +0100 -@@ -819,14 +819,14 @@ - passwd[string_len] = '\0'; - if (!smux_auth_peer(oid_name, oid_name_len, passwd, fd)) { - snmp_log(LOG_WARNING, -- "refused smux peer: oid %s, password %s, descr %s\n", -- oid_print, passwd, descr); -+ "refused smux peer: oid %s, descr %s\n", -+ oid_print, descr); - *fail = TRUE; - return ptr; - } - snmp_log(LOG_INFO, -- "accepted smux peer: oid %s, password %s, descr %s\n", -- oid_print, passwd, descr); -+ "accepted smux peer: oid %s, descr %s\n", -+ oid_print, descr); - *fail = FALSE; - return ptr; - } -diff -ruN net-snmp-5.1.2-orig/apps/Makefile.in net-snmp-5.1.2-5/apps/Makefile.in ---- net-snmp-5.1.2-orig/apps/Makefile.in 2004-03-09 16:51:28.000000000 +0100 -+++ net-snmp-5.1.2-5/apps/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -129,7 +129,7 @@ - $(LINK) -o $@ snmpdf.$(OSUFFIX) $(LOCAL_LIBS) ${LDFLAGS} ${LIBS} - - libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION): $(LLIBTRAPD_OBJS) -- $(LIB_LD_CMD) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBTRAPD_OBJS} $(LIB_LD_LIBS) -+ $(LIB_LD_CMD) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) ${LLIBTRAPD_OBJS} $(LIB_LD_LIBS) $(TRAPD_RELINK_LIBS) - $(RANLIB) libnetsnmptrapd.$(LIB_EXTENSION)$(LIB_VERSION) - - snmpinforminstall: -diff -ruN net-snmp-5.1.2-orig/apps/snmpnetstat/if.c net-snmp-5.1.2-5/apps/snmpnetstat/if.c ---- net-snmp-5.1.2-orig/apps/snmpnetstat/if.c 2002-04-20 09:30:10.000000000 +0200 -+++ net-snmp-5.1.2-5/apps/snmpnetstat/if.c 2005-03-13 16:17:21.000000000 +0100 -@@ -300,8 +300,9 @@ - case IFINDEX: - ifindex = *var->val.integer; - for (cur_if = if_table; -- cur_if->ifindex != ifindex && cur_if->ifindex != 0; -- cur_if++); -+ cur_if < (if_table + cfg_nnets) && -+ cur_if->ifindex != ifindex && -+ cur_if->ifindex != 0; cur_if++); - if (cur_if >= (if_table + cfg_nnets)) { - fprintf(stderr, - "Inconsistent reponse from server. Aborting\n"); -@@ -492,8 +493,14 @@ - case IPIFINDEX: - ifindex = *var->val.integer; - for (cur_if = if_table; -- cur_if->ifindex != ifindex && cur_if->ifindex != 0; -- cur_if++); -+ cur_if < (if_table + cfg_nnets) && -+ cur_if->ifindex != ifindex && -+ cur_if->ifindex != 0; cur_if++); -+ if (cur_if >= (if_table + cfg_nnets)) { -+ fprintf(stderr, -+ "Inconsistent reponse from server. Aborting.\n"); -+ exit(0); -+ } - cur_if->ifindex = ifindex; - break; - case IPADDR: -@@ -567,8 +574,14 @@ - case IFINDEX: - ifindex = *var->val.integer; - for (cur_if = if_table; -- cur_if->ifindex != ifindex && cur_if->ifindex != 0; -- cur_if++); -+ cur_if < (if_table + cfg_nnets) && -+ cur_if->ifindex != ifindex && -+ cur_if->ifindex != 0; cur_if++); -+ if (cur_if >= (if_table + cfg_nnets)) { -+ fprintf(stderr, -+ "Inconsistent reponse from server. Aborting.\n"); -+ exit(0); -+ } - cur_if->ifindex = ifindex; - break; - case INOCTETS: -diff -ruN net-snmp-5.1.2-orig/configure.in net-snmp-5.1.2-5/configure.in ---- net-snmp-5.1.2-orig/configure.in 2004-06-23 00:06:40.000000000 +0200 -+++ net-snmp-5.1.2-5/configure.in 2005-03-13 16:17:21.000000000 +0100 -@@ -161,6 +161,9 @@ - AC_DEFINE(SNMP_NO_DEBUGGING) - fi - -+AC_ARG_WITH(rpm, -+[ --without-rpm Don't use RPM even if available.]) -+ - AC_ARG_WITH(dmalloc, - [ --with-dmalloc=PATH Use dmalloc library (www.dmalloc.com)], - if test "x$withval" = "xyes"; then -@@ -1539,12 +1542,13 @@ - AC_CHECK_LIB(RSAglue, RSA_PKCS1_RSAref) - fi - -- AC_CHECK_LIB(crypto, EVP_md5) -+ AC_CHECK_LIB(crypto, EVP_md5, [CRYPTOLIBS=-lcrypto], , ) - AC_CHECK_FUNCS(AES_cfb128_encrypt) - fi - elif test "x$askedpkcs" = "xyes"; then - AC_CHECK_LIB(pkcs11, C_Initialize) - fi -+AC_SUBST(CRYPTOLIBS) - - # Check for libraries that the agent needs - # saving old libraries -@@ -1664,8 +1668,9 @@ - # Replace `main' with a function in -lkvm: - AC_CHECK_LIB(kvm, kvm_read) - # DYNAMIC MODULE SUPPORT --AC_CHECK_LIB(dl, dlopen) --AC_CHECK_FUNCS(dlopen) -+AC_CHECK_FUNC(dlopen, AC_DEFINE(HAVE_DLOPEN), -+ AC_CHECK_LIB(dl, dlopen, AC_DEFINE(HAVE_DLOPEN) -+ LIBS="${LIBS} -ldl")) - - AC_CHECK_FUNCS(kvm_openfiles nlist knlist kvm_getprocs) - echo "$with_mib_modules" | grep "ucd-snmp/diskio" >/dev/null -@@ -1979,7 +1984,7 @@ - - AC_MSG_RESULT([$ac_cv_type_ssize_t]) - if test $ac_cv_type_ssize_t = yes; then -- AC_DEFINE(HAVE_SSIZE_T) -+ AC_DEFINE(HAVE_SSIZE_T, 1, [Define if type ssize_t is available]) - fi - - # Check ps args -diff -ruN net-snmp-5.1.2-orig/debian/README.Debian net-snmp-5.1.2-5/debian/README.Debian -diff -ruN net-snmp-5.1.2-orig/debian/changelog net-snmp-5.1.2-5/debian/changelog -diff -ruN net-snmp-5.1.2-orig/debian/control net-snmp-5.1.2-5/debian/control -diff -ruN net-snmp-5.1.2-orig/debian/copyright net-snmp-5.1.2-5/debian/copyright -diff -ruN net-snmp-5.1.2-orig/debian/fixman net-snmp-5.1.2-5/debian/fixman -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.dirs net-snmp-5.1.2-5/debian/libsnmp-base.dirs -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.docs net-snmp-5.1.2-5/debian/libsnmp-base.docs -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.files net-snmp-5.1.2-5/debian/libsnmp-base.files -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.postrm net-snmp-5.1.2-5/debian/libsnmp-base.postrm -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-base.prerm net-snmp-5.1.2-5/debian/libsnmp-base.prerm -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-perl.docs net-snmp-5.1.2-5/debian/libsnmp-perl.docs -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp-perl.files net-snmp-5.1.2-5/debian/libsnmp-perl.files -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5-dev.files net-snmp-5.1.2-5/debian/libsnmp5-dev.files -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5-dev.manpages net-snmp-5.1.2-5/debian/libsnmp5-dev.manpages -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.dirs net-snmp-5.1.2-5/debian/libsnmp5.dirs -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.docs net-snmp-5.1.2-5/debian/libsnmp5.docs -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.files net-snmp-5.1.2-5/debian/libsnmp5.files -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.postinst net-snmp-5.1.2-5/debian/libsnmp5.postinst -diff -ruN net-snmp-5.1.2-orig/debian/libsnmp5.prerm net-snmp-5.1.2-5/debian/libsnmp5.prerm -diff -ruN net-snmp-5.1.2-orig/debian/manpages/encode_keychange.1 net-snmp-5.1.2-5/debian/manpages/encode_keychange.1 -diff -ruN net-snmp-5.1.2-orig/debian/manpages/net-snmp-config.1 net-snmp-5.1.2-5/debian/manpages/net-snmp-config.1 -diff -ruN net-snmp-5.1.2-orig/debian/manpages/snmpvacm.1 net-snmp-5.1.2-5/debian/manpages/snmpvacm.1 -diff -ruN net-snmp-5.1.2-orig/debian/manpages/tkmib.1 net-snmp-5.1.2-5/debian/manpages/tkmib.1 -diff -ruN net-snmp-5.1.2-orig/debian/rules net-snmp-5.1.2-5/debian/rules -diff -ruN net-snmp-5.1.2-orig/debian/snmp.files net-snmp-5.1.2-5/debian/snmp.files -diff -ruN net-snmp-5.1.2-orig/debian/snmp.manpages net-snmp-5.1.2-5/debian/snmp.manpages -diff -ruN net-snmp-5.1.2-orig/debian/snmp.preinst net-snmp-5.1.2-5/debian/snmp.preinst -diff -ruN net-snmp-5.1.2-orig/debian/snmpd.default net-snmp-5.1.2-5/debian/snmpd.default -diff -ruN net-snmp-5.1.2-orig/debian/snmpd.files net-snmp-5.1.2-5/debian/snmpd.files -diff -ruN net-snmp-5.1.2-orig/debian/snmpd.init net-snmp-5.1.2-5/debian/snmpd.init -diff -ruN net-snmp-5.1.2-orig/debian/snmpd.postinst net-snmp-5.1.2-5/debian/snmpd.postinst -diff -ruN net-snmp-5.1.2-orig/debian/snmpd.postrm net-snmp-5.1.2-5/debian/snmpd.postrm -diff -ruN net-snmp-5.1.2-orig/debian/tkmib.docs net-snmp-5.1.2-5/debian/tkmib.docs -diff -ruN net-snmp-5.1.2-orig/debian/tkmib.files net-snmp-5.1.2-5/debian/tkmib.files -diff -ruN net-snmp-5.1.2-orig/debian/tkmib.manpages net-snmp-5.1.2-5/debian/tkmib.manpages -diff -ruN net-snmp-5.1.2-orig/debian/watch net-snmp-5.1.2-5/debian/watch -diff -ruN net-snmp-5.1.2-orig/ipkg/libsnmp/CONTROL/control net-snmp-5.1.2-5/ipkg/libsnmp/CONTROL/control -diff -ruN net-snmp-5.1.2-orig/ipkg/libsnmp-dev/CONTROL/control net-snmp-5.1.2-5/ipkg/libsnmp-dev/CONTROL/control -diff -ruN net-snmp-5.1.2-orig/ipkg/rules net-snmp-5.1.2-5/ipkg/rules -diff -ruN net-snmp-5.1.2-orig/ipkg/snmp-utils/CONTROL/control net-snmp-5.1.2-5/ipkg/snmp-utils/CONTROL/control -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/CONTROL/conffiles net-snmp-5.1.2-5/ipkg/snmpd/CONTROL/conffiles -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/CONTROL/control net-snmp-5.1.2-5/ipkg/snmpd/CONTROL/control -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/default/snmpd net-snmp-5.1.2-5/ipkg/snmpd/etc/default/snmpd -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/init.d/snmpd net-snmp-5.1.2-5/ipkg/snmpd/etc/init.d/snmpd -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd/etc/snmp/snmpd.conf net-snmp-5.1.2-5/ipkg/snmpd/etc/snmp/snmpd.conf -diff -ruN net-snmp-5.1.2-orig/ipkg/snmpd-static/CONTROL/control net-snmp-5.1.2-5/ipkg/snmpd-static/CONTROL/control -diff -ruN net-snmp-5.1.2-orig/ipkg/version net-snmp-5.1.2-5/ipkg/version -diff -ruN net-snmp-5.1.2-orig/local/Makefile.in net-snmp-5.1.2-5/local/Makefile.in ---- net-snmp-5.1.2-orig/local/Makefile.in 2003-12-20 05:38:17.000000000 +0100 -+++ net-snmp-5.1.2-5/local/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -58,7 +58,7 @@ - - mib2c.made: $(srcdir)/mib2c - if test "x$(PERLPROG)" != "x" ; then \ -- $(PERLPROG) -p -e 's%^#!.*/perl.*%#!$(PERLPROG)%;s#/usr/local/share/snmp#$(snmplibdir)#;' ${srcdir}/mib2c > mib2c.made; \ -+ $(PERLPROG) -p -e 's%^#!.*/perl.*%#!$(PERLPROG)%;s#/usr/local/share/snmp#$(snmplibdir)#;s#/usr/local/etc/snmp#$(SNMPCONFPATH)#;' ${srcdir}/mib2c > mib2c.made; \ - else \ - touch mib2c.made; \ - fi -diff -ruN net-snmp-5.1.2-orig/local/mib2c net-snmp-5.1.2-5/local/mib2c ---- net-snmp-5.1.2-orig/local/mib2c 2004-06-15 16:26:37.000000000 +0200 -+++ net-snmp-5.1.2-5/local/mib2c 2005-03-13 16:17:21.000000000 +0100 -@@ -56,7 +56,8 @@ - if($ENV{MIB2C_DIR}) { - push @def_search_dirs, $ENV{MIB2C_DIR}; - } --push @def_search_dirs, "/usr/local/share/snmp/"; -+push @def_search_dirs, "/etc/snmp/"; -+push @def_search_dirs, "/usr/share/snmp/"; - - - sub usage { -diff -ruN net-snmp-5.1.2-orig/man/mib2c.1.def net-snmp-5.1.2-5/man/mib2c.1.def ---- net-snmp-5.1.2-orig/man/mib2c.1.def 2003-10-02 20:04:19.000000000 +0200 -+++ net-snmp-5.1.2-5/man/mib2c.1.def 2005-03-13 16:17:21.000000000 +0100 -@@ -72,8 +72,9 @@ - .TP - .BI -c " CONFIGFILE" - Use CONFIGFILE when generating code. These files will be searched for --first in the current directory and then in the DATADIR directory --(which is where the default mib2c configuration files can be found). -+first in the current directory and then in /etc/snmp -+(which is where the default mib2c configuration files can be found) -+and finally in the DATADIR directory. - Running mib2c without the -c CONFIGFILE option will display - a description of the valid values for CONFIGFILE, that is, - the available config files, including new ones that you might -diff -ruN net-snmp-5.1.2-orig/man/mib_api.3.def net-snmp-5.1.2-5/man/mib_api.3.def ---- net-snmp-5.1.2-orig/man/mib_api.3.def 2004-04-15 00:41:32.000000000 +0200 -+++ net-snmp-5.1.2-5/man/mib_api.3.def 2005-03-13 16:17:21.000000000 +0100 -@@ -5,7 +5,7 @@ - add_module_replacement, - read_module, read_mib, read_all_mibs, - read_objid, read_module_node, --get_module_node, read_objid -+get_module_node - snmp_set_mib_warnings, snmp_set_save_descriptions, - shutdown_mib, - print_mib, -@@ -34,9 +34,9 @@ - .PP - .BI "void print_mib(FILE *" "fp" ); - .PP --.BI "int read_objid(char *" "input" ", oid *" "output" ", int *" "out_len" ); -+.BI "int read_objid(char *" "input" ", oid *" "output" ", size_t *" "out_len" ); - .br --.BI "int get_module_node(char *" "name" ", char *" "module" ", oid *" "objid" ", int *" "objidlen" ); -+.BI "int get_module_node(char *" "name" ", char *" "module" ", oid *" "objid" ", size_t *" "objidlen" ); - .PP - .BI "void print_variable(const oid *" "objid" ", size_t " "objidlen" ", struct variable_list *" "variable" ); - .br -diff -ruN net-snmp-5.1.2-orig/man/snmp_config.5.def net-snmp-5.1.2-5/man/snmp_config.5.def ---- net-snmp-5.1.2-orig/man/snmp_config.5.def 2003-12-10 11:41:41.000000000 +0100 -+++ net-snmp-5.1.2-5/man/snmp_config.5.def 2005-03-13 16:17:21.000000000 +0100 -@@ -11,7 +11,7 @@ - found and read from. By default, the applications look for - configuration files in the following 4 directories, in order: - SYSCONFDIR/snmp, --DATADIR/snmp, LIBDIR/snmp, and $HOME/.snmp. In each of these -+/etc/snmp, LIBDIR/snmp, and $HOME/.snmp. In each of these - directories, it looks for files with the extension of both - .IR conf " and " local.conf - (reading the second ones last). In this manner, there are -diff -ruN net-snmp-5.1.2-orig/man/snmp_trap_api.3.def net-snmp-5.1.2-5/man/snmp_trap_api.3.def ---- net-snmp-5.1.2-orig/man/snmp_trap_api.3.def 2003-09-29 04:58:18.000000000 +0200 -+++ net-snmp-5.1.2-5/man/snmp_trap_api.3.def 2005-03-13 16:17:21.000000000 +0100 -@@ -1,8 +1,7 @@ - .TH SNMP_TRAP_API 3 "7 Mar 2002" VVERSIONINFO "Net-SNMP" - .UC 5 - .SH NAME --send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs --from a Net-SNMP MIB module -+send_easy_trap, send_trap_vars, send_v2trap - send TRAPs or INFORMs from a Net-SNMP MIB module - .SH SYNOPSIS - .B #include <net-snmp/agent/agent_trap.h> - .PP -diff -ruN net-snmp-5.1.2-orig/mibs/BGP4-MIB.txt net-snmp-5.1.2-5/mibs/BGP4-MIB.txt ---- net-snmp-5.1.2-orig/mibs/BGP4-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/BGP4-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,929 @@ -+ BGP4-MIB DEFINITIONS ::= BEGIN -+ -+ IMPORTS -+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, -+ IpAddress, Integer32, Counter32, Gauge32, mib-2 -+ FROM SNMPv2-SMI -+ MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP -+ FROM SNMPv2-CONF; -+ -+ bgp MODULE-IDENTITY -+ LAST-UPDATED "9902100000Z" -+ ORGANIZATION "IETF IDR Working Group" -+ CONTACT-INFO "E-mail: idr@merit.net -+ -+ Susan Hares (Editor) -+ Merit Network -+ 4251 Plymouth Road -+ Suite C -+ Ann Arbor, MI 48105-2785 -+ Tel: +1 734 936 2095 -+ Fax: +1 734 647 3185 -+ E-mail: skh@merit.edu -+ -+ Jeff Johnson (Editor) -+ RedBack Networks, Inc. -+ 1389 Moffett Park Drive -+ Sunnyvale, CA 94089-1134 -+ Tel: +1 408 548 3516 -+ Fax: +1 408 548 3599 -+ E-mail: jeff@redback.com" -+ DESCRIPTION -+ "The MIB module for BGP-4." -+ REVISION "9902100000Z" -+ DESCRIPTION -+ "Corrected duplicate OBJECT IDENTIFIER -+ assignment in the conformance information." -+ REVISION "9601080000Z" -+ DESCRIPTION -+ "1) Fixed the definitions of the traps to -+ make them equivalent to their initial -+ definition in RFC 1269. -+ 2) Added compliance and conformance info." -+ ::= { mib-2 15 } -+ -+ bgpVersion OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (1..255)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Vector of supported BGP protocol version -+ numbers. Each peer negotiates the version -+ from this vector. Versions are identified -+ via the string of bits contained within this -+ object. The first octet contains bits 0 to -+ 7, the second octet contains bits 8 to 15, -+ and so on, with the most significant bit -+ referring to the lowest bit number in the -+ octet (e.g., the MSB of the first octet -+ refers to bit 0). If a bit, i, is present -+ and set, then the version (i+1) of the BGP -+ is supported." -+ ::= { bgp 1 } -+ -+ bgpLocalAs OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The local autonomous system number." -+ ::= { bgp 2 } -+ -+ -+ -+ -- BGP Peer table. This table contains, one entry per BGP -+ -- peer, information about the BGP peer. -+ -+ bgpPeerTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF BgpPeerEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "BGP peer table. This table contains, -+ one entry per BGP peer, information about the -+ connections with BGP peers." -+ ::= { bgp 3 } -+ -+ bgpPeerEntry OBJECT-TYPE -+ SYNTAX BgpPeerEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Entry containing information about the -+ connection with a BGP peer." -+ INDEX { bgpPeerRemoteAddr } -+ ::= { bgpPeerTable 1 } -+ -+ BgpPeerEntry ::= SEQUENCE { -+ bgpPeerIdentifier -+ IpAddress, -+ bgpPeerState -+ INTEGER, -+ bgpPeerAdminStatus -+ INTEGER, -+ bgpPeerNegotiatedVersion -+ Integer32, -+ bgpPeerLocalAddr -+ IpAddress, -+ bgpPeerLocalPort -+ INTEGER, -+ bgpPeerRemoteAddr -+ IpAddress, -+ bgpPeerRemotePort -+ INTEGER, -+ bgpPeerRemoteAs -+ INTEGER, -+ bgpPeerInUpdates -+ Counter32, -+ bgpPeerOutUpdates -+ Counter32, -+ bgpPeerInTotalMessages -+ Counter32, -+ bgpPeerOutTotalMessages -+ Counter32, -+ bgpPeerLastError -+ OCTET STRING, -+ bgpPeerFsmEstablishedTransitions -+ Counter32, -+ bgpPeerFsmEstablishedTime -+ Gauge32, -+ bgpPeerConnectRetryInterval -+ INTEGER, -+ bgpPeerHoldTime -+ INTEGER, -+ bgpPeerKeepAlive -+ INTEGER, -+ bgpPeerHoldTimeConfigured -+ INTEGER, -+ bgpPeerKeepAliveConfigured -+ INTEGER, -+ bgpPeerMinASOriginationInterval -+ INTEGER, -+ bgpPeerMinRouteAdvertisementInterval -+ INTEGER, -+ bgpPeerInUpdateElapsedTime -+ Gauge32 -+ } -+ -+ bgpPeerIdentifier OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The BGP Identifier of this entry's BGP peer." -+ ::= { bgpPeerEntry 1 } -+ -+ bgpPeerState OBJECT-TYPE -+ SYNTAX INTEGER { -+ idle(1), -+ connect(2), -+ active(3), -+ opensent(4), -+ openconfirm(5), -+ established(6) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The BGP peer connection state." -+ ::= { bgpPeerEntry 2 } -+ -+ bgpPeerAdminStatus OBJECT-TYPE -+ SYNTAX INTEGER { -+ stop(1), -+ start(2) -+ } -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The desired state of the BGP connection. A -+ transition from 'stop' to 'start' will cause -+ the BGP Start Event to be generated. A -+ transition from 'start' to 'stop' will cause -+ the BGP Stop Event to be generated. This -+ parameter can be used to restart BGP peer -+ connections. Care should be used in providing -+ write access to this object without adequate -+ authentication." -+ ::= { bgpPeerEntry 3 } -+ -+ bgpPeerNegotiatedVersion OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The negotiated version of BGP running between -+ the two peers." -+ ::= { bgpPeerEntry 4 } -+ -+ bgpPeerLocalAddr OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The local IP address of this entry's BGP -+ connection." -+ ::= { bgpPeerEntry 5 } -+ -+ bgpPeerLocalPort OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The local port for the TCP connection between -+ the BGP peers." -+ ::= { bgpPeerEntry 6 } -+ -+ bgpPeerRemoteAddr OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The remote IP address of this entry's BGP -+ peer." -+ ::= { bgpPeerEntry 7 } -+ -+ bgpPeerRemotePort OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The remote port for the TCP connection between -+ the BGP peers. Note that the objects -+ bgpPeerLocalAddr, bgpPeerLocalPort, -+ bgpPeerRemoteAddr and bgpPeerRemotePort -+ provide the appropriate reference to the -+ standard MIB TCP connection table." -+ ::= { bgpPeerEntry 8 } -+ -+ bgpPeerRemoteAs OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The remote autonomous system number." -+ ::= { bgpPeerEntry 9 } -+ -+ bgpPeerInUpdates OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of BGP UPDATE messages received on -+ this connection. This object should be -+ initialized to zero (0) when the connection is -+ established." -+ ::= { bgpPeerEntry 10 } -+ -+ bgpPeerOutUpdates OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of BGP UPDATE messages transmitted -+ on this connection. This object should be -+ initialized to zero (0) when the connection is -+ established." -+ ::= { bgpPeerEntry 11 } -+ -+ bgpPeerInTotalMessages OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of messages received from the -+ remote peer on this connection. This object -+ should be initialized to zero when the -+ connection is established." -+ ::= { bgpPeerEntry 12 } -+ -+ bgpPeerOutTotalMessages OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of messages transmitted to -+ the remote peer on this connection. This object -+ should be initialized to zero when the -+ connection is established." -+ ::= { bgpPeerEntry 13 } -+ -+ bgpPeerLastError OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (2)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The last error code and subcode seen by this -+ peer on this connection. If no error has -+ occurred, this field is zero. Otherwise, the -+ first byte of this two byte OCTET STRING -+ contains the error code, and the second byte -+ contains the subcode." -+ ::= { bgpPeerEntry 14 } -+ -+ bgpPeerFsmEstablishedTransitions OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of times the BGP FSM -+ transitioned into the established state." -+ ::= { bgpPeerEntry 15 } -+ -+ bgpPeerFsmEstablishedTime OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This timer indicates how long (in seconds) this -+ peer has been in the Established state or how long -+ since this peer was last in the Established state. -+ It is set to zero when a new peer is configured or -+ the router is booted." -+ ::= { bgpPeerEntry 16 } -+ -+ bgpPeerConnectRetryInterval OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the ConnectRetry -+ timer. The suggested value for this timer is -+ 120 seconds." -+ ::= { bgpPeerEntry 17 } -+ -+ bgpPeerHoldTime OBJECT-TYPE -+ SYNTAX INTEGER ( 0 | 3..65535 ) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the Hold Timer -+ established with the peer. The value of this -+ object is calculated by this BGP speaker by -+ using the smaller of the value in -+ bgpPeerHoldTimeConfigured and the Hold Time -+ received in the OPEN message. This value -+ must be at lease three seconds if it is not -+ zero (0) in which case the Hold Timer has -+ not been established with the peer, or, the -+ value of bgpPeerHoldTimeConfigured is zero (0)." -+ ::= { bgpPeerEntry 18 } -+ -+ bgpPeerKeepAlive OBJECT-TYPE -+ SYNTAX INTEGER ( 0 | 1..21845 ) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the KeepAlive -+ timer established with the peer. The value of -+ this object is calculated by this BGP speaker -+ such that, when compared with bgpPeerHoldTime, -+ it has the same proportion as what -+ bgpPeerKeepAliveConfigured has when compared -+ with bgpPeerHoldTimeConfigured. If the value -+ of this object is zero (0), it indicates that -+ the KeepAlive timer has not been established -+ with the peer, or, the value of -+ bgpPeerKeepAliveConfigured is zero (0)." -+ ::= { bgpPeerEntry 19 } -+ -+ bgpPeerHoldTimeConfigured OBJECT-TYPE -+ SYNTAX INTEGER ( 0 | 3..65535 ) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the Hold Time -+ configured for this BGP speaker with this peer. -+ This value is placed in an OPEN message sent to -+ this peer by this BGP speaker, and is compared -+ with the Hold Time field in an OPEN message -+ received from the peer when determining the Hold -+ Time (bgpPeerHoldTime) with the peer. This value -+ must not be less than three seconds if it is not -+ zero (0) in which case the Hold Time is NOT to be -+ established with the peer. The suggested value for -+ this timer is 90 seconds." -+ ::= { bgpPeerEntry 20 } -+ -+ bgpPeerKeepAliveConfigured OBJECT-TYPE -+ SYNTAX INTEGER ( 0 | 1..21845 ) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the KeepAlive timer -+ configured for this BGP speaker with this peer. -+ The value of this object will only determine the -+ KEEPALIVE messages' frequency relative to the value -+ specified in bgpPeerHoldTimeConfigured; the actual -+ time interval for the KEEPALIVE messages is -+ indicated by bgpPeerKeepAlive. A reasonable -+ maximum value for this timer would be configured to -+ be one third of that of bgpPeerHoldTimeConfigured. -+ If the value of this object is zero (0), no -+ periodical KEEPALIVE messages are sent to the peer -+ after the BGP connection has been established. The -+ suggested value for this timer is 30 seconds." -+ ::= { bgpPeerEntry 21 } -+ -+ bgpPeerMinASOriginationInterval OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the -+ MinASOriginationInterval timer. -+ The suggested value for this timer is 15 seconds." -+ ::= { bgpPeerEntry 22 } -+ -+ bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "Time interval in seconds for the -+ MinRouteAdvertisementInterval timer. -+ The suggested value for this timer is 30 seconds." -+ ::= { bgpPeerEntry 23 } -+ -+ bgpPeerInUpdateElapsedTime OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Elapsed time in seconds since the last BGP -+ UPDATE message was received from the peer. -+ Each time bgpPeerInUpdates is incremented, -+ the value of this object is set to zero (0)." -+ ::= { bgpPeerEntry 24 } -+ -+ -+ -+ bgpIdentifier OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The BGP Identifier of local system." -+ ::= { bgp 4 } -+ -+ -+ -+ -- Received Path Attribute Table. This table contains, -+ -- one entry per path to a network, path attributes -+ -- received from all peers running BGP version 3 or less. -+ -- This table is obsolete, having been replaced in -+ -- functionality with the bgp4PathAttrTable. -+ -+ bgpRcvdPathAttrTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF BgpPathAttrEntry -+ MAX-ACCESS not-accessible -+ STATUS obsolete -+ DESCRIPTION -+ "The BGP Received Path Attribute Table contains -+ information about paths to destination networks -+ received from all peers running BGP version 3 or -+ less." -+ ::= { bgp 5 } -+ -+ bgpPathAttrEntry OBJECT-TYPE -+ SYNTAX BgpPathAttrEntry -+ MAX-ACCESS not-accessible -+ STATUS obsolete -+ DESCRIPTION -+ "Information about a path to a network." -+ INDEX { bgpPathAttrDestNetwork, -+ bgpPathAttrPeer } -+ ::= { bgpRcvdPathAttrTable 1 } -+ -+ BgpPathAttrEntry ::= SEQUENCE { -+ bgpPathAttrPeer -+ IpAddress, -+ bgpPathAttrDestNetwork -+ IpAddress, -+ bgpPathAttrOrigin -+ INTEGER, -+ bgpPathAttrASPath -+ OCTET STRING, -+ bgpPathAttrNextHop -+ IpAddress, -+ bgpPathAttrInterASMetric -+ Integer32 -+ } -+ -+ bgpPathAttrPeer OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The IP address of the peer where the path -+ information was learned." -+ ::= { bgpPathAttrEntry 1 } -+ -+ bgpPathAttrDestNetwork OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The address of the destination network." -+ ::= { bgpPathAttrEntry 2 } -+ -+ bgpPathAttrOrigin OBJECT-TYPE -+ SYNTAX INTEGER { -+ igp(1),-- networks are interior -+ egp(2),-- networks learned via EGP -+ incomplete(3) -- undetermined -+ } -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The ultimate origin of the path information." -+ ::= { bgpPathAttrEntry 3 } -+ -+ bgpPathAttrASPath OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (2..255)) -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The set of ASs that must be traversed to reach -+ the network. This object is probably best -+ represented as SEQUENCE OF INTEGER. For SMI -+ compatibility, though, it is represented as -+ OCTET STRING. Each AS is represented as a pair -+ of octets according to the following algorithm: -+ -+ first-byte-of-pair = ASNumber / 256; -+ second-byte-of-pair = ASNumber & 255;" -+ ::= { bgpPathAttrEntry 4 } -+ -+ bgpPathAttrNextHop OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The address of the border router that should -+ be used for the destination network." -+ ::= { bgpPathAttrEntry 5 } -+ -+ bgpPathAttrInterASMetric OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The optional inter-AS metric. If this -+ attribute has not been provided for this route, -+ the value for this object is 0." -+ ::= { bgpPathAttrEntry 6 } -+ -+ -+ -+ -- BGP-4 Received Path Attribute Table. This table contains, -+ -- one entry per path to a network, path attributes -+ -- received from all peers running BGP-4. -+ -+ bgp4PathAttrTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Bgp4PathAttrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The BGP-4 Received Path Attribute Table contains -+ information about paths to destination networks -+ received from all BGP4 peers." -+ ::= { bgp 6 } -+ -+ bgp4PathAttrEntry OBJECT-TYPE -+ SYNTAX Bgp4PathAttrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information about a path to a network." -+ INDEX { bgp4PathAttrIpAddrPrefix, -+ bgp4PathAttrIpAddrPrefixLen, -+ bgp4PathAttrPeer } -+ ::= { bgp4PathAttrTable 1 } -+ -+ Bgp4PathAttrEntry ::= SEQUENCE { -+ bgp4PathAttrPeer -+ IpAddress, -+ bgp4PathAttrIpAddrPrefixLen -+ INTEGER, -+ bgp4PathAttrIpAddrPrefix -+ IpAddress, -+ bgp4PathAttrOrigin -+ INTEGER, -+ bgp4PathAttrASPathSegment -+ OCTET STRING, -+ bgp4PathAttrNextHop -+ IpAddress, -+ bgp4PathAttrMultiExitDisc -+ INTEGER, -+ bgp4PathAttrLocalPref -+ INTEGER, -+ bgp4PathAttrAtomicAggregate -+ INTEGER, -+ bgp4PathAttrAggregatorAS -+ INTEGER, -+ bgp4PathAttrAggregatorAddr -+ IpAddress, -+ bgp4PathAttrCalcLocalPref -+ INTEGER, -+ bgp4PathAttrBest -+ INTEGER, -+ bgp4PathAttrUnknown -+ OCTET STRING -+ } -+ -+ bgp4PathAttrPeer OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address of the peer where the path -+ information was learned." -+ ::= { bgp4PathAttrEntry 1 } -+ bgp4PathAttrIpAddrPrefixLen OBJECT-TYPE -+ SYNTAX INTEGER (0..32) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Length in bits of the IP address prefix in the -+ Network Layer Reachability Information field." -+ ::= { bgp4PathAttrEntry 2 } -+ -+ bgp4PathAttrIpAddrPrefix OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "An IP address prefix in the Network Layer -+ Reachability Information field. This object -+ is an IP address containing the prefix with -+ length specified by bgp4PathAttrIpAddrPrefixLen. -+ Any bits beyond the length specified by -+ bgp4PathAttrIpAddrPrefixLen are zeroed." -+ ::= { bgp4PathAttrEntry 3 } -+ -+ bgp4PathAttrOrigin OBJECT-TYPE -+ SYNTAX INTEGER { -+ igp(1),-- networks are interior -+ egp(2),-- networks learned via EGP -+ incomplete(3) -- undetermined -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The ultimate origin of the path information." -+ ::= { bgp4PathAttrEntry 4 } -+ -+ bgp4PathAttrASPathSegment OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (2..255)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The sequence of AS path segments. Each AS -+ path segment is represented by a triple -+ <type, length, value>. -+ -+ The type is a 1-octet field which has two -+ possible values: -+ 1 AS_SET: unordered set of ASs a -+ route in the UPDATE message -+ has traversed -+ 2 AS_SEQUENCE: ordered set of ASs -+ a route in the UPDATE message -+ has traversed. -+ -+ The length is a 1-octet field containing the -+ number of ASs in the value field. -+ -+ The value field contains one or more AS -+ numbers, each AS is represented in the octet -+ string as a pair of octets according to the -+ following algorithm: -+ -+ first-byte-of-pair = ASNumber / 256; -+ second-byte-of-pair = ASNumber & 255;" -+ ::= { bgp4PathAttrEntry 5 } -+ -+ bgp4PathAttrNextHop OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The address of the border router that should -+ be used for the destination network." -+ ::= { bgp4PathAttrEntry 6 } -+ -+ bgp4PathAttrMultiExitDisc OBJECT-TYPE -+ SYNTAX INTEGER (-1..2147483647) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This metric is used to discriminate between -+ multiple exit points to an adjacent autonomous -+ system. A value of -1 indicates the absence of -+ this attribute." -+ ::= { bgp4PathAttrEntry 7 } -+ -+ bgp4PathAttrLocalPref OBJECT-TYPE -+ SYNTAX INTEGER (-1..2147483647) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The originating BGP4 speaker's degree of -+ preference for an advertised route. A value of -+ -1 indicates the absence of this attribute." -+ ::= { bgp4PathAttrEntry 8 } -+ -+ bgp4PathAttrAtomicAggregate OBJECT-TYPE -+ SYNTAX INTEGER { -+ lessSpecificRrouteNotSelected(1), -+ lessSpecificRouteSelected(2) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Whether or not a system has selected -+ a less specific route without selecting a -+ more specific route." -+ ::= { bgp4PathAttrEntry 9 } -+ -+ bgp4PathAttrAggregatorAS OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The AS number of the last BGP4 speaker that -+ performed route aggregation. A value of zero (0) -+ indicates the absence of this attribute." -+ ::= { bgp4PathAttrEntry 10 } -+ -+ bgp4PathAttrAggregatorAddr OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address of the last BGP4 speaker that -+ performed route aggregation. A value of -+ 0.0.0.0 indicates the absence of this attribute." -+ ::= { bgp4PathAttrEntry 11 } -+ -+ bgp4PathAttrCalcLocalPref OBJECT-TYPE -+ SYNTAX INTEGER (-1..2147483647) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The degree of preference calculated by the -+ receiving BGP4 speaker for an advertised route. -+ A value of -1 indicates the absence of this -+ attribute." -+ ::= { bgp4PathAttrEntry 12 } -+ -+ bgp4PathAttrBest OBJECT-TYPE -+ SYNTAX INTEGER { -+ false(1),-- not chosen as best route -+ true(2) -- chosen as best route -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "An indication of whether or not this route -+ was chosen as the best BGP4 route." -+ ::= { bgp4PathAttrEntry 13 } -+ -+ bgp4PathAttrUnknown OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE(0..255)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "One or more path attributes not understood -+ by this BGP4 speaker. Size zero (0) indicates -+ the absence of such attribute(s). Octets -+ beyond the maximum size, if any, are not -+ recorded by this object." -+ ::= { bgp4PathAttrEntry 14 } -+ -+ -+ -- Traps. -+ -+ -- note that in RFC 1657, bgpTraps was incorrectly -+ -- assigned a value of { bgp 7 }, and each of the -+ -- traps had the bgpPeerRemoteAddr object inappropriately -+ -- removed from their OBJECTS clause. The following -+ -- definitions restore the semantics of the traps as -+ -- they were initially defined in RFC 1269. -+ -+ -- { bgp 7 } is unused -+ -+ bgpTraps OBJECT IDENTIFIER ::= { bgp 0 } -+ -+ bgpEstablished NOTIFICATION-TYPE -+ OBJECTS { bgpPeerRemoteAddr, -+ bgpPeerLastError, -+ bgpPeerState } -+ STATUS current -+ DESCRIPTION -+ "The BGP Established event is generated when -+ the BGP FSM enters the ESTABLISHED state." -+ ::= { bgpTraps 1 } -+ -+ bgpBackwardTransition NOTIFICATION-TYPE -+ OBJECTS { bgpPeerRemoteAddr, -+ bgpPeerLastError, -+ bgpPeerState } -+ STATUS current -+ DESCRIPTION -+ "The BGPBackwardTransition Event is generated -+ when the BGP FSM moves from a higher numbered -+ state to a lower numbered state." -+ ::= { bgpTraps 2 } -+ -+ -- conformance information -+ -+ bgpMIBConformance OBJECT IDENTIFIER ::= { bgp 8 } -+ bgpMIBCompliances OBJECT IDENTIFIER ::= { bgpMIBConformance 1 } -+ bgpMIBGroups OBJECT IDENTIFIER ::= { bgpMIBConformance 2 } -+ -+ -- compliance statements -+ -+ bgpMIBCompliance MODULE-COMPLIANCE -+ STATUS current -+ DESCRIPTION -+ "The compliance statement for entities which -+ implement the BGP4 mib." -+ MODULE -- this module -+ MANDATORY-GROUPS { bgp4MIBGlobalsGroup, -+ bgp4MIBPeerGroup, -+ bgp4MIBPathAttrGroup, -+ bgp4MIBNotificationGroup } -+ ::= { bgpMIBCompliances 1 } -+ -+ -- units of conformance -+ -+ bgp4MIBGlobalsGroup OBJECT-GROUP -+ OBJECTS { bgpVersion, -+ bgpLocalAs, -+ bgpIdentifier } -+ STATUS current -+ DESCRIPTION -+ "A collection of objects providing information -+ on global BGP state." -+ ::= { bgpMIBGroups 1 } -+ -+ bgp4MIBPeerGroup OBJECT-GROUP -+ OBJECTS { bgpPeerIdentifier, -+ bgpPeerState, -+ bgpPeerAdminStatus, -+ bgpPeerNegotiatedVersion, -+ bgpPeerLocalAddr, -+ bgpPeerLocalPort, -+ bgpPeerRemoteAddr, -+ bgpPeerRemotePort, -+ bgpPeerRemoteAs, -+ bgpPeerInUpdates, -+ bgpPeerOutUpdates, -+ bgpPeerInTotalMessages, -+ bgpPeerOutTotalMessages, -+ bgpPeerLastError, -+ bgpPeerFsmEstablishedTransitions, -+ bgpPeerFsmEstablishedTime, -+ bgpPeerConnectRetryInterval, -+ bgpPeerHoldTime, -+ bgpPeerKeepAlive, -+ bgpPeerHoldTimeConfigured, -+ bgpPeerKeepAliveConfigured, -+ bgpPeerMinASOriginationInterval, -+ bgpPeerMinRouteAdvertisementInterval, -+ bgpPeerInUpdateElapsedTime } -+ STATUS current -+ DESCRIPTION -+ "A collection of objects for managing -+ BGP peers." -+ ::= { bgpMIBGroups 2 } -+ -+ bgp4MIBRcvdPathAttrGroup OBJECT-GROUP -+ OBJECTS { bgpPathAttrPeer, -+ bgpPathAttrDestNetwork, -+ bgpPathAttrOrigin, -+ bgpPathAttrASPath, -+ bgpPathAttrNextHop, -+ bgpPathAttrInterASMetric } -+ STATUS obsolete -+ DESCRIPTION -+ "A collection of objects for managing BGP -+ path entries. -+ -+ This conformance group is obsolete, -+ replaced by bgp4MIBPathAttrGroup." -+ ::= { bgpMIBGroups 3 } -+ -+ bgp4MIBPathAttrGroup OBJECT-GROUP -+ OBJECTS { bgp4PathAttrPeer, -+ bgp4PathAttrIpAddrPrefixLen, -+ bgp4PathAttrIpAddrPrefix, -+ bgp4PathAttrOrigin, -+ bgp4PathAttrASPathSegment, -+ bgp4PathAttrNextHop, -+ bgp4PathAttrMultiExitDisc, -+ bgp4PathAttrLocalPref, -+ bgp4PathAttrAtomicAggregate, -+ bgp4PathAttrAggregatorAS, -+ bgp4PathAttrAggregatorAddr, -+ bgp4PathAttrCalcLocalPref, -+ bgp4PathAttrBest, -+ bgp4PathAttrUnknown } -+ STATUS current -+ DESCRIPTION -+ "A collection of objects for managing -+ BGP path entries." -+ ::= { bgpMIBGroups 4 } -+ -+ bgp4MIBNotificationGroup NOTIFICATION-GROUP -+ NOTIFICATIONS { bgpEstablished, -+ bgpBackwardTransition } -+ STATUS current -+ DESCRIPTION -+ "A collection of notifications for signaling -+ changes in BGP peer relationships." -+ ::= { bgpMIBGroups 5 } -+ -+ END -diff -ruN net-snmp-5.1.2-orig/mibs/BRIDGE-MIB.txt net-snmp-5.1.2-5/mibs/BRIDGE-MIB.txt ---- net-snmp-5.1.2-orig/mibs/BRIDGE-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/BRIDGE-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,1075 @@ -+BRIDGE-MIB DEFINITIONS ::= BEGIN -+ -+IMPORTS -+ Counter, TimeTicks -+ FROM RFC1155-SMI -+ mib-2 -+ FROM RFC1213-MIB -+ OBJECT-TYPE -+ FROM RFC-1212 -+ TRAP-TYPE -+ FROM RFC-1215; -+ -+-- All representations of MAC addresses in this MIB Module -+-- use, as a textual convention (i.e. this convention does -+-- not affect their encoding), the data type: -+MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -+ -- in the -+ -- "canonical" -+ -- order -+-- defined by IEEE 802.1a, i.e., as if it were transmitted -+-- least significant bit first, even though 802.5 (in -+-- contrast to other n802.x protocols) requires MAC -+-- addresses to be transmitted most significant bit first. -+-- -+-- 16-bit addresses, if needed, are represented by setting -+-- their upper 4 octets to all 0's, i.e., AAFF would be -+-- represented as 00000000AAFF. -+ -+-- Similarly, all representations of Bridge-Id in this MIB -+-- Module use, as a textual convention (i.e. this -+-- convention does not affect their encoding), the data -+-- type: -+BridgeId ::= OCTET STRING (SIZE (8)) -- the -+ -- Bridge-Identifier -+ -- as used in the -+ -- Spanning Tree -+-- Protocol to uniquely identify a bridge. Its first two -+-- octets (in network byte order) contain a priority -+-- value and its last 6 octets contain the MAC address -+-- used to refer to a bridge in a unique fashion -+-- (typically, the numerically smallest MAC address -+-- of all ports on the bridge). -+ -+-- Several objects in this MIB module represent values of -+-- timers used by the Spanning Tree Protocol. In this -+-- MIB, these timers have values in units of hundreths of -+-- a second (i.e. 1/100 secs). -+-- These timers, when stored in a Spanning Tree Protocol's -+-- BPDU, are in units of 1/256 seconds. Note, however, -+-- that 802.1D-1990 specifies a settable granularity of -+-- no more than 1 second for these timers. To avoid -+-- ambiguity, a data type is defined here as a textual -+-- convention and all representation of these timers -+-- in this MIB module are defined using this data type. An -+-- algorithm is also defined for converting between the -+-- different units, to ensure a timer's value is not -+-- distorted by multiple conversions. -+-- The data type is: -+ -+Timeout ::= INTEGER -- a STP timer in units of 1/100 seconds -+ -+-- To convert a Timeout value into a value in units of -+-- 1/256 seconds, the following algorithm should be used: -+-- -+-- b = floor( (n * 256) / 100) -+-- -+-- where: -+-- floor = quotient [ignore remainder] -+-- n is the value in 1/100 second units -+-- b is the value in 1/256 second units -+-- -+-- To convert the value from 1/256 second units back to -+-- 1/100 seconds, the following algorithm should be used: -+-- -+-- n = ceiling( (b * 100) / 256) -+-- -+-- where: -+-- ceiling = quotient [if remainder is 0], or -+-- quotient + 1 [if remainder is non-zero] -+-- n is the value in 1/100 second units -+-- b is the value in 1/256 second units -+-- -+-- Note: it is important that the arithmetic operations are -+-- done in the order specified (i.e., multiply first, divide -+-- second). -+ -+ dot1dBridge OBJECT IDENTIFIER ::= { mib-2 17 } -+ -+-- groups in the Bridge MIB -+ -+dot1dBase OBJECT IDENTIFIER ::= { dot1dBridge 1 } -+ -+dot1dStp OBJECT IDENTIFIER ::= { dot1dBridge 2 } -+ -+dot1dSr OBJECT IDENTIFIER ::= { dot1dBridge 3 } -+-- separately documented -+ -+dot1dTp OBJECT IDENTIFIER ::= { dot1dBridge 4 } -+ -+dot1dStatic OBJECT IDENTIFIER ::= { dot1dBridge 5 } -+ -+-- the dot1dBase group -+ -+-- Implementation of the dot1dBase group is mandatory for all -+-- bridges. -+ -+dot1dBaseBridgeAddress OBJECT-TYPE -+ SYNTAX MacAddress -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The MAC address used by this bridge when it must -+ be referred to in a unique fashion. It is -+ recommended that this be the numerically smallest -+ MAC address of all ports that belong to this -+ bridge. However it is only required to be unique. -+ When concatenated with dot1dStpPriority a unique -+ BridgeIdentifier is formed which is used in the -+ Spanning Tree Protocol." -+ REFERENCE -+ "IEEE 802.1D-1990: Sections 6.4.1.1.3 and 3.12.5" -+ ::= { dot1dBase 1 } -+ -+dot1dBaseNumPorts OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of ports controlled by this bridging -+ entity." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.4.1.1.3" -+ ::= { dot1dBase 2 } -+ -+dot1dBaseType OBJECT-TYPE -+ SYNTAX INTEGER { -+ unknown(1), -+ transparent-only(2), -+ sourceroute-only(3), -+ srt(4) -+ } -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "Indicates what type of bridging this bridge can -+ perform. If a bridge is actually performing a -+ certain type of bridging this will be indicated by -+ entries in the port table for the given type." -+ ::= { dot1dBase 3 } -+ -+-- The Generic Bridge Port Table -+ -+dot1dBasePortTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dBasePortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains generic information about -+ every port that is associated with this bridge. -+ Transparent, source-route, and srt ports are -+ included." -+ ::= { dot1dBase 4 } -+ -+dot1dBasePortEntry OBJECT-TYPE -+ SYNTAX Dot1dBasePortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A list of information for each port of the -+ bridge." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.4.2, 6.6.1" -+ INDEX { dot1dBasePort } -+ ::= { dot1dBasePortTable 1 } -+ -+Dot1dBasePortEntry ::= -+ SEQUENCE { -+ dot1dBasePort -+ INTEGER, -+ dot1dBasePortIfIndex -+ INTEGER, -+ dot1dBasePortCircuit -+ -+ OBJECT IDENTIFIER, -+ dot1dBasePortDelayExceededDiscards -+ Counter, -+ dot1dBasePortMtuExceededDiscards -+ Counter -+ } -+ -+dot1dBasePort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the port for which this entry -+ contains bridge management information." -+ ::= { dot1dBasePortEntry 1 } -+ -+dot1dBasePortIfIndex OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The value of the instance of the ifIndex object, -+ defined in MIB-II, for the interface corresponding -+ to this port." -+ ::= { dot1dBasePortEntry 2 } -+ -+dot1dBasePortCircuit OBJECT-TYPE -+ SYNTAX OBJECT IDENTIFIER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "For a port which (potentially) has the same value -+ of dot1dBasePortIfIndex as another port on the -+ same bridge, this object contains the name of an -+ object instance unique to this port. For example, -+ in the case where multiple ports correspond one- -+ to-one with multiple X.25 virtual circuits, this -+ value might identify an (e.g., the first) object -+ instance associated with the X.25 virtual circuit -+ corresponding to this port. -+ -+ For a port which has a unique value of -+ dot1dBasePortIfIndex, this object can have the -+ value { 0 0 }." -+ ::= { dot1dBasePortEntry 3 } -+ -+dot1dBasePortDelayExceededDiscards OBJECT-TYPE -+ SYNTAX Counter -+ -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of frames discarded by this port due -+ to excessive transit delay through the bridge. It -+ is incremented by both transparent and source -+ route bridges." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.6.1.1.3" -+ ::= { dot1dBasePortEntry 4 } -+ -+dot1dBasePortMtuExceededDiscards OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of frames discarded by this port due -+ to an excessive size. It is incremented by both -+ transparent and source route bridges." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.6.1.1.3" -+ ::= { dot1dBasePortEntry 5 } -+ -+-- the dot1dStp group -+ -+-- Implementation of the dot1dStp group is optional. It is -+-- implemented by those bridges that support the Spanning Tree -+-- Protocol. -+ -+dot1dStpProtocolSpecification OBJECT-TYPE -+ SYNTAX INTEGER { -+ unknown(1), -+ decLb100(2), -+ ieee8021d(3) -+ } -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "An indication of what version of the Spanning -+ Tree Protocol is being run. The value -+ 'decLb100(2)' indicates the DEC LANbridge 100 -+ Spanning Tree protocol. IEEE 802.1d -+ implementations will return 'ieee8021d(3)'. If -+ future versions of the IEEE Spanning Tree Protocol -+ are released that are incompatible with the -+ current version a new value will be defined." -+ -+ ::= { dot1dStp 1 } -+ -+dot1dStpPriority OBJECT-TYPE -+ SYNTAX INTEGER (0..65535) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The value of the write-able portion of the Bridge -+ ID, i.e., the first two octets of the (8 octet -+ long) Bridge ID. The other (last) 6 octets of the -+ Bridge ID are given by the value of -+ dot1dBaseBridgeAddress." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.7" -+ ::= { dot1dStp 2 } -+ -+dot1dStpTimeSinceTopologyChange OBJECT-TYPE -+ SYNTAX TimeTicks -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The time (in hundredths of a second) since the -+ last time a topology change was detected by the -+ bridge entity." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.8.1.1.3" -+ ::= { dot1dStp 3 } -+ -+dot1dStpTopChanges OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The total number of topology changes detected by -+ this bridge since the management entity was last -+ reset or initialized." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.8.1.1.3" -+ ::= { dot1dStp 4 } -+ -+dot1dStpDesignatedRoot OBJECT-TYPE -+ SYNTAX BridgeId -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The bridge identifier of the root of the spanning -+ tree as determined by the Spanning Tree Protocol -+ as executed by this node. This value is used as -+ -+ the Root Identifier parameter in all Configuration -+ Bridge PDUs originated by this node." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.1" -+ ::= { dot1dStp 5 } -+ -+dot1dStpRootCost OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The cost of the path to the root as seen from -+ this bridge." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.2" -+ ::= { dot1dStp 6 } -+ -+dot1dStpRootPort OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the port which offers the -+ lowest cost path from this bridge to the root -+ bridge." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.3" -+ ::= { dot1dStp 7 } -+ -+dot1dStpMaxAge OBJECT-TYPE -+ SYNTAX Timeout -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The maximum age of Spanning Tree Protocol -+ information learned from the network on any port -+ before it is discarded, in units of hundredths of -+ a second. This is the actual value that this -+ bridge is currently using." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.4" -+ ::= { dot1dStp 8 } -+ -+dot1dStpHelloTime OBJECT-TYPE -+ SYNTAX Timeout -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ -+ "The amount of time between the transmission of -+ Configuration bridge PDUs by this node on any port -+ when it is the root of the spanning tree or trying -+ to become so, in units of hundredths of a second. -+ This is the actual value that this bridge is -+ currently using." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.5" -+ ::= { dot1dStp 9 } -+ -+dot1dStpHoldTime OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "This time value determines the interval length -+ during which no more than two Configuration bridge -+ PDUs shall be transmitted by this node, in units -+ of hundredths of a second." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.14" -+ ::= { dot1dStp 10 } -+ -+dot1dStpForwardDelay OBJECT-TYPE -+ SYNTAX Timeout -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "This time value, measured in units of hundredths -+ of a second, controls how fast a port changes its -+ spanning state when moving towards the Forwarding -+ state. The value determines how long the port -+ stays in each of the Listening and Learning -+ states, which precede the Forwarding state. This -+ value is also used, when a topology change has -+ been detected and is underway, to age all dynamic -+ entries in the Forwarding Database. [Note that -+ this value is the one that this bridge is -+ currently using, in contrast to -+ dot1dStpBridgeForwardDelay which is the value that -+ this bridge and all others would start using -+ if/when this bridge were to become the root.]" -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.6" -+ ::= { dot1dStp 11 } -+ -+dot1dStpBridgeMaxAge OBJECT-TYPE -+ SYNTAX Timeout (600..4000) -+ -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The value that all bridges use for MaxAge when -+ this bridge is acting as the root. Note that -+ 802.1D-1990 specifies that the range for this -+ parameter is related to the value of -+ dot1dStpBridgeHelloTime. The granularity of this -+ timer is specified by 802.1D-1990 to be 1 second. -+ An agent may return a badValue error if a set is -+ attempted to a value which is not a whole number -+ of seconds." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.8" -+ ::= { dot1dStp 12 } -+ -+dot1dStpBridgeHelloTime OBJECT-TYPE -+ SYNTAX Timeout (100..1000) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The value that all bridges use for HelloTime when -+ this bridge is acting as the root. The -+ granularity of this timer is specified by 802.1D- -+ 1990 to be 1 second. An agent may return a -+ badValue error if a set is attempted to a value -+ which is not a whole number of seconds." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.9" -+ ::= { dot1dStp 13 } -+ -+dot1dStpBridgeForwardDelay OBJECT-TYPE -+ SYNTAX Timeout (400..3000) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The value that all bridges use for ForwardDelay -+ when this bridge is acting as the root. Note that -+ 802.1D-1990 specifies that the range for this -+ parameter is related to the value of -+ dot1dStpBridgeMaxAge. The granularity of this -+ timer is specified by 802.1D-1990 to be 1 second. -+ An agent may return a badValue error if a set is -+ attempted to a value which is not a whole number -+ of seconds." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.3.10" -+ ::= { dot1dStp 14 } -+ -+-- The Spanning Tree Port Table -+ -+dot1dStpPortTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dStpPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains port-specific information -+ for the Spanning Tree Protocol." -+ ::= { dot1dStp 15 } -+ -+dot1dStpPortEntry OBJECT-TYPE -+ SYNTAX Dot1dStpPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A list of information maintained by every port -+ about the Spanning Tree Protocol state for that -+ port." -+ INDEX { dot1dStpPort } -+ ::= { dot1dStpPortTable 1 } -+ -+Dot1dStpPortEntry ::= -+ SEQUENCE { -+ dot1dStpPort -+ INTEGER, -+ dot1dStpPortPriority -+ INTEGER, -+ dot1dStpPortState -+ INTEGER, -+ dot1dStpPortEnable -+ INTEGER, -+ dot1dStpPortPathCost -+ INTEGER, -+ dot1dStpPortDesignatedRoot -+ BridgeId, -+ dot1dStpPortDesignatedCost -+ INTEGER, -+ dot1dStpPortDesignatedBridge -+ BridgeId, -+ dot1dStpPortDesignatedPort -+ OCTET STRING, -+ dot1dStpPortForwardTransitions -+ Counter -+ } -+ -+dot1dStpPort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the port for which this entry -+ contains Spanning Tree Protocol management -+ information." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.8.2.1.2" -+ ::= { dot1dStpPortEntry 1 } -+ -+dot1dStpPortPriority OBJECT-TYPE -+ SYNTAX INTEGER (0..255) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The value of the priority field which is -+ contained in the first (in network byte order) -+ octet of the (2 octet long) Port ID. The other -+ octet of the Port ID is given by the value of -+ dot1dStpPort." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.1" -+ ::= { dot1dStpPortEntry 2 } -+ -+dot1dStpPortState OBJECT-TYPE -+ SYNTAX INTEGER { -+ disabled(1), -+ blocking(2), -+ listening(3), -+ learning(4), -+ forwarding(5), -+ broken(6) -+ } -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port's current state as defined by -+ application of the Spanning Tree Protocol. This -+ state controls what action a port takes on -+ reception of a frame. If the bridge has detected -+ a port that is malfunctioning it will place that -+ port into the broken(6) state. For ports which -+ are disabled (see dot1dStpPortEnable), this object -+ will have a value of disabled(1)." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.2" -+ ::= { dot1dStpPortEntry 3 } -+ -+dot1dStpPortEnable OBJECT-TYPE -+ SYNTAX INTEGER { -+ enabled(1), -+ disabled(2) -+ } -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The enabled/disabled status of the port." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.2" -+ ::= { dot1dStpPortEntry 4 } -+ -+dot1dStpPortPathCost OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The contribution of this port to the path cost of -+ paths towards the spanning tree root which include -+ this port. 802.1D-1990 recommends that the -+ default value of this parameter be in inverse -+ proportion to the speed of the attached LAN." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.3" -+ ::= { dot1dStpPortEntry 5 } -+ -+dot1dStpPortDesignatedRoot OBJECT-TYPE -+ SYNTAX BridgeId -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The unique Bridge Identifier of the Bridge -+ recorded as the Root in the Configuration BPDUs -+ transmitted by the Designated Bridge for the -+ segment to which the port is attached." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.4" -+ ::= { dot1dStpPortEntry 6 } -+ -+dot1dStpPortDesignatedCost OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The path cost of the Designated Port of the -+ segment connected to this port. This value is -+ compared to the Root Path Cost field in received -+ -+ bridge PDUs." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.5" -+ ::= { dot1dStpPortEntry 7 } -+ -+dot1dStpPortDesignatedBridge OBJECT-TYPE -+ SYNTAX BridgeId -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The Bridge Identifier of the bridge which this -+ port considers to be the Designated Bridge for -+ this port's segment." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.6" -+ ::= { dot1dStpPortEntry 8 } -+ -+dot1dStpPortDesignatedPort OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (2)) -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The Port Identifier of the port on the Designated -+ Bridge for this port's segment." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 4.5.5.7" -+ ::= { dot1dStpPortEntry 9 } -+ -+dot1dStpPortForwardTransitions OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of times this port has transitioned -+ from the Learning state to the Forwarding state." -+ ::= { dot1dStpPortEntry 10 } -+ -+-- the dot1dTp group -+ -+-- Implementation of the dot1dTp group is optional. It is -+-- implemented by those bridges that support the transparent -+-- bridging mode. A transparent or SRT bridge will implement -+-- this group. -+ -+dot1dTpLearnedEntryDiscards OBJECT-TYPE -+ SYNTAX Counter -+ -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The total number of Forwarding Database entries, -+ which have been or would have been learnt, but -+ have been discarded due to a lack of space to -+ store them in the Forwarding Database. If this -+ counter is increasing, it indicates that the -+ Forwarding Database is regularly becoming full (a -+ condition which has unpleasant performance effects -+ on the subnetwork). If this counter has a -+ significant value but is not presently increasing, -+ it indicates that the problem has been occurring -+ but is not persistent." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.7.1.1.3" -+ ::= { dot1dTp 1 } -+ -+dot1dTpAgingTime OBJECT-TYPE -+ SYNTAX INTEGER (10..1000000) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The timeout period in seconds for aging out -+ dynamically learned forwarding information. -+ 802.1D-1990 recommends a default of 300 seconds." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.7.1.1.3" -+ ::= { dot1dTp 2 } -+ -+-- The Forwarding Database for Transparent Bridges -+ -+dot1dTpFdbTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dTpFdbEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains information about unicast -+ entries for which the bridge has forwarding and/or -+ filtering information. This information is used -+ by the transparent bridging function in -+ determining how to propagate a received frame." -+ ::= { dot1dTp 3 } -+ -+dot1dTpFdbEntry OBJECT-TYPE -+ SYNTAX Dot1dTpFdbEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "Information about a specific unicast MAC address -+ for which the bridge has some forwarding and/or -+ filtering information." -+ INDEX { dot1dTpFdbAddress } -+ ::= { dot1dTpFdbTable 1 } -+ -+Dot1dTpFdbEntry ::= -+ SEQUENCE { -+ dot1dTpFdbAddress -+ MacAddress, -+ dot1dTpFdbPort -+ INTEGER, -+ dot1dTpFdbStatus -+ INTEGER -+ } -+ -+dot1dTpFdbAddress OBJECT-TYPE -+ SYNTAX MacAddress -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "A unicast MAC address for which the bridge has -+ forwarding and/or filtering information." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" -+ ::= { dot1dTpFdbEntry 1 } -+ -+dot1dTpFdbPort OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "Either the value '0', or the port number of the -+ port on which a frame having a source address -+ equal to the value of the corresponding instance -+ of dot1dTpFdbAddress has been seen. A value of -+ '0' indicates that the port number has not been -+ learned but that the bridge does have some -+ forwarding/filtering information about this -+ address (e.g. in the dot1dStaticTable). -+ Implementors are encouraged to assign the port -+ value to this object whenever it is learned even -+ for addresses for which the corresponding value of -+ dot1dTpFdbStatus is not learned(3)." -+ ::= { dot1dTpFdbEntry 2 } -+ -+dot1dTpFdbStatus OBJECT-TYPE -+ SYNTAX INTEGER { -+ other(1), -+ invalid(2), -+ learned(3), -+ self(4), -+ mgmt(5) -+ } -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The status of this entry. The meanings of the -+ values are: -+ other(1) : none of the following. This would -+ include the case where some other -+ MIB object (not the corresponding -+ instance of dot1dTpFdbPort, nor an -+ entry in the dot1dStaticTable) is -+ being used to determine if and how -+ frames addressed to the value of -+ the corresponding instance of -+ dot1dTpFdbAddress are being -+ forwarded. -+ invalid(2) : this entry is not longer valid -+ (e.g., it was learned but has since -+ aged-out), but has not yet been -+ flushed from the table. -+ learned(3) : the value of the corresponding -+ instance of dot1dTpFdbPort was -+ learned, and is being used. -+ self(4) : the value of the corresponding -+ instance of dot1dTpFdbAddress -+ represents one of the bridge's -+ addresses. The corresponding -+ instance of dot1dTpFdbPort -+ indicates which of the bridge's -+ ports has this address. -+ mgmt(5) : the value of the corresponding -+ instance of dot1dTpFdbAddress is -+ also the value of an existing -+ instance of dot1dStaticAddress." -+ ::= { dot1dTpFdbEntry 3 } -+ -+-- Port Table for Transparent Bridges -+ -+dot1dTpPortTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dTpPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains information about every -+ port that is associated with this transparent -+ bridge." -+ ::= { dot1dTp 4 } -+ -+dot1dTpPortEntry OBJECT-TYPE -+ SYNTAX Dot1dTpPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A list of information for each port of a -+ transparent bridge." -+ INDEX { dot1dTpPort } -+ ::= { dot1dTpPortTable 1 } -+ -+Dot1dTpPortEntry ::= -+ SEQUENCE { -+ dot1dTpPort -+ INTEGER, -+ dot1dTpPortMaxInfo -+ INTEGER, -+ dot1dTpPortInFrames -+ Counter, -+ dot1dTpPortOutFrames -+ Counter, -+ dot1dTpPortInDiscards -+ Counter -+ } -+ -+dot1dTpPort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the port for which this entry -+ contains Transparent bridging management -+ information." -+ ::= { dot1dTpPortEntry 1 } -+ -+-- It would be nice if we could use ifMtu as the size of the -+-- largest INFO field, but we can't because ifMtu is defined -+-- to be the size that the (inter-)network layer can use which -+-- can differ from the MAC layer (especially if several layers -+-- of encapsulation are used). -+ -+dot1dTpPortMaxInfo OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The maximum size of the INFO (non-MAC) field that -+ this port will receive or transmit." -+ ::= { dot1dTpPortEntry 2 } -+ -+dot1dTpPortInFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of frames that have been received by -+ this port from its segment. Note that a frame -+ received on the interface corresponding to this -+ port is only counted by this object if and only if -+ it is for a protocol being processed by the local -+ bridging function, including bridge management -+ frames." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.6.1.1.3" -+ ::= { dot1dTpPortEntry 3 } -+ -+dot1dTpPortOutFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of frames that have been transmitted -+ by this port to its segment. Note that a frame -+ transmitted on the interface corresponding to this -+ port is only counted by this object if and only if -+ it is for a protocol being processed by the local -+ bridging function, including bridge management -+ frames." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.6.1.1.3" -+ ::= { dot1dTpPortEntry 4 } -+ -+dot1dTpPortInDiscards OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "Count of valid frames received which were -+ discarded (i.e., filtered) by the Forwarding -+ Process." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.6.1.1.3" -+ ::= { dot1dTpPortEntry 5 } -+-- The Static (Destination-Address Filtering) Database -+ -+-- Implementation of this group is optional. -+ -+dot1dStaticTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dStaticEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table containing filtering information -+ configured into the bridge by (local or network) -+ management specifying the set of ports to which -+ frames received from specific ports and containing -+ specific destination addresses are allowed to be -+ forwarded. The value of zero in this table as the -+ port number from which frames with a specific -+ destination address are received, is used to -+ specify all ports for which there is no specific -+ entry in this table for that particular -+ destination address. Entries are valid for -+ unicast and for group/broadcast addresses." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.7.2" -+ ::= { dot1dStatic 1 } -+ -+dot1dStaticEntry OBJECT-TYPE -+ SYNTAX Dot1dStaticEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "Filtering information configured into the bridge -+ by (local or network) management specifying the -+ set of ports to which frames received from a -+ specific port and containing a specific -+ destination address are allowed to be forwarded." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 6.7.2" -+ INDEX { dot1dStaticAddress, dot1dStaticReceivePort } -+ ::= { dot1dStaticTable 1 } -+ -+Dot1dStaticEntry ::= -+ SEQUENCE { -+ dot1dStaticAddress -+ MacAddress, -+ dot1dStaticReceivePort -+ INTEGER, -+ dot1dStaticAllowedToGoTo -+ OCTET STRING, -+ dot1dStaticStatus -+ INTEGER -+ } -+ -+dot1dStaticAddress OBJECT-TYPE -+ SYNTAX MacAddress -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The destination MAC address in a frame to which -+ this entry's filtering information applies. This -+ object can take the value of a unicast address, a -+ group address or the broadcast address." -+ REFERENCE -+ "IEEE 802.1D-1990: Section 3.9.1, 3.9.2" -+ ::= { dot1dStaticEntry 1 } -+ -+dot1dStaticReceivePort OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "Either the value '0', or the port number of the -+ port from which a frame must be received in order -+ for this entry's filtering information to apply. -+ A value of zero indicates that this entry applies -+ on all ports of the bridge for which there is no -+ other applicable entry." -+ ::= { dot1dStaticEntry 2 } -+ -+dot1dStaticAllowedToGoTo OBJECT-TYPE -+ SYNTAX OCTET STRING -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The set of ports to which frames received from a -+ specific port and destined for a specific MAC -+ -+ address, are allowed to be forwarded. Each octet -+ within the value of this object specifies a set of -+ eight ports, with the first octet specifying ports -+ 1 through 8, the second octet specifying ports 9 -+ through 16, etc. Within each octet, the most -+ significant bit represents the lowest numbered -+ port, and the least significant bit represents the -+ highest numbered port. Thus, each port of the -+ bridge is represented by a single bit within the -+ value of this object. If that bit has a value of -+ '1' then that port is included in the set of -+ ports; the port is not included if its bit has a -+ value of '0'. (Note that the setting of the bit -+ corresponding to the port from which a frame is -+ received is irrelevant.) The default value of -+ this object is a string of ones of appropriate -+ length." -+ ::= { dot1dStaticEntry 3 } -+ -+dot1dStaticStatus OBJECT-TYPE -+ SYNTAX INTEGER { -+ other(1), -+ invalid(2), -+ permanent(3), -+ deleteOnReset(4), -+ deleteOnTimeout(5) -+ } -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "This object indicates the status of this entry. -+ The default value is permanent(3). -+ other(1) - this entry is currently in use but -+ the conditions under which it will -+ remain so are different from each of the -+ following values. -+ invalid(2) - writing this value to the object -+ removes the corresponding entry. -+ permanent(3) - this entry is currently in use -+ and will remain so after the next reset -+ of the bridge. -+ deleteOnReset(4) - this entry is currently in -+ use and will remain so until the next -+ reset of the bridge. -+ deleteOnTimeout(5) - this entry is currently -+ in use and will remain so until it is -+ aged out." -+ -+ ::= { dot1dStaticEntry 4 } -+ -+-- Traps for use by Bridges -+ -+-- Traps for the Spanning Tree Protocol -+ -+newRoot TRAP-TYPE -+ ENTERPRISE dot1dBridge -+ DESCRIPTION -+ "The newRoot trap indicates that the sending agent -+ has become the new root of the Spanning Tree; the -+ trap is sent by a bridge soon after its election -+ as the new root, e.g., upon expiration of the -+ Topology Change Timer immediately subsequent to -+ its election. Implementation of this trap is -+ optional." -+ ::= 1 -+ -+topologyChange TRAP-TYPE -+ ENTERPRISE dot1dBridge -+ DESCRIPTION -+ "A topologyChange trap is sent by a bridge when -+ any of its configured ports transitions from the -+ Learning state to the Forwarding state, or from -+ the Forwarding state to the Blocking state. The -+ trap is not sent if a newRoot trap is sent for the -+ same transition. Implementation of this trap is -+ optional." -+ ::= 2 -+ -+END -diff -ruN net-snmp-5.1.2-orig/mibs/GNOME-SMI.txt net-snmp-5.1.2-5/mibs/GNOME-SMI.txt ---- net-snmp-5.1.2-orig/mibs/GNOME-SMI.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/GNOME-SMI.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,72 @@ -+GNOME-SMI DEFINITIONS ::= BEGIN -+ -+IMPORTS -+ MODULE-IDENTITY, -+ OBJECT-IDENTITY, -+ enterprises -+ FROM SNMPv2-SMI; -+ -+gnome MODULE-IDENTITY -+ LAST-UPDATED "200312070000Z" -+ ORGANIZATION "GNOME project" -+ CONTACT-INFO -+ "GNU Network Object Model Environment project -+ -+ see http://www.gnome.org for contact persons of a particular -+ area or subproject of GNOME. -+ -+ Administrative contact for MIB module: -+ -+ Jochen Friedrich -+ Buedingerstr. 30b -+ 63546 Hammersbach -+ Germany -+ -+ email: jochen@scram.de" -+ DESCRIPTION -+ "The Structure of GNOME." -+ -+ -- revision history -+ -+ REVISION "9809010000Z" -- September 01, 1998 -+ DESCRIPTION -+ "Initial version." -+ -+ REVISION "200312070000Z" -- December 07, 2003 -+ DESCRIPTION -+ "Added gnomeSysadmin subtree for GNOME project system administration. -+ Updated contact info." -+ -+ ::= { enterprises 3317 } -- assigned by IANA -+ -+gnomeProducts OBJECT-IDENTITY -+ STATUS current -+ DESCRIPTION -+ "gnomeProducts is the root OBJECT IDENTIFIER from -+ which sysObjectID values are assigned." -+ ::= { gnome 1 } -+ -+gnomeMgmt OBJECT-IDENTITY -+ STATUS current -+ DESCRIPTION -+ "gnomeMgmt defines the subtree for production GNOME related -+ MIB registrations." -+ ::= { gnome 2 } -+ -+gnomeTest OBJECT-IDENTITY -+ STATUS current -+ DESCRIPTION -+ "gnomeTest defines the subtree for testing GNOME related -+ MIB registrations." -+ ::= { gnome 3 } -+ -+gnomeSysadmin OBJECT-IDENTITY -+ STATUS current -+ DESCRIPTION -+ "gnomeSysadmin defines the subtree for GNOME related Sysadmin -+ MIB registrations." -+ ::= { gnome 4 } -+ -+-- more to come if necessary. -+ -+END -diff -ruN net-snmp-5.1.2-orig/mibs/Makefile.in net-snmp-5.1.2-5/mibs/Makefile.in ---- net-snmp-5.1.2-orig/mibs/Makefile.in 2004-06-18 20:11:15.000000000 +0200 -+++ net-snmp-5.1.2-5/mibs/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -43,11 +43,15 @@ - UCDMIBS = UCD-SNMP-MIB.txt UCD-DEMO-MIB.txt UCD-IPFWACC-MIB.txt \ - UCD-DLMOD-MIB.txt UCD-DISKIO-MIB.txt - -+EXTRAMIBS = BGP4-MIB.txt BRIDGE-MIB.txt GNOME-SMI.txt OSPF-MIB.txt \ -+ OSPF-TRAP-MIB.txt RIPv2-MIB.txt SOURCE-ROUTING-MIB.txt \ -+ LM-SENSORS-MIB.txt -+ - DEFAULTMIBS = @default_mibs_install@ - - MIBS = $(V1MIBS) $(V2MIBS) $(V3MIBS) $(RFCMIBS) \ - $(AGENTMIBS) $(IANAMIBS) \ -- $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS) -+ $(NETSNMPMIBS) $(UCDMIBS) $(DEFAULTMIBS) $(EXTRAMIBS) - - all: standardall - -diff -ruN net-snmp-5.1.2-orig/mibs/OSPF-MIB.txt net-snmp-5.1.2-5/mibs/OSPF-MIB.txt ---- net-snmp-5.1.2-orig/mibs/OSPF-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/OSPF-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,2723 @@ -+OSPF-MIB DEFINITIONS ::= BEGIN -+ -+ IMPORTS -+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, -+ Integer32, IpAddress -+ FROM SNMPv2-SMI -+ TEXTUAL-CONVENTION, TruthValue, RowStatus -+ FROM SNMPv2-TC -+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -+ mib-2 FROM RFC1213-MIB; -+ -+-- This MIB module uses the extended OBJECT-TYPE macro as -+-- defined in [9]. -+ -+ospf MODULE-IDENTITY -+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 -+ ORGANIZATION "IETF OSPF Working Group" -+ CONTACT-INFO -+ " Fred Baker -+ Postal: Cisco Systems -+ 519 Lado Drive -+ Santa Barbara, California 93111 -+ Tel: +1 805 681 0115 -+ E-Mail: fred@cisco.com -+ -+ Rob Coltun -+ Postal: RainbowBridge Communications -+ Tel: (301) 340-9416 -+ E-Mail: rcoltun@rainbow-bridge.com" -+ DESCRIPTION -+ "The MIB module to describe the OSPF Version 2 -+ Protocol" -+ ::= { mib-2 14 } -+ -+-- The Area ID, in OSPF, has the same format as an IP Address, -+-- but has the function of defining a summarization point for -+-- Link State Advertisements -+ -+AreaID ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "An OSPF Area Identifier." -+ SYNTAX IpAddress -+ -+ -+-- The Router ID, in OSPF, has the same format as an IP Address, -+-- but identifies the router independent of its IP Address. -+ -+RouterID ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "A OSPF Router Identifier." -+ SYNTAX IpAddress -+ -+ -+-- The OSPF Metric is defined as an unsigned value in the range -+ -+Metric ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The OSPF Internal Metric." -+ SYNTAX Integer32 (0..'FFFF'h) -+ -+BigMetric ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The OSPF External Metric." -+ SYNTAX Integer32 (0..'FFFFFF'h) -+ -+-- Status Values -+ -+Status ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The status of an interface: 'enabled' indicates that -+ it is willing to communicate with other OSPF Routers, -+ while 'disabled' indicates that it is not." -+ SYNTAX INTEGER { enabled (1), disabled (2) } -+ -+-- Time Durations measured in seconds -+ -+PositiveInteger ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "A positive integer. Values in excess are precluded as -+ unnecessary and prone to interoperability issues." -+ SYNTAX Integer32 (0..'7FFFFFFF'h) -+ -+HelloRange ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The range of intervals on which hello messages are -+ exchanged." -+ SYNTAX Integer32 (1..'FFFF'h) -+ -+UpToMaxAge ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The values that one might find or configure for -+ variables bounded by the maximum age of an LSA." -+ SYNTAX Integer32 (0..3600) -+ -+ -+-- The range of ifIndex -+ -+InterfaceIndex ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The range of ifIndex." -+ SYNTAX Integer32 -+ -+ -+-- Potential Priorities for the Designated Router Election -+ -+DesignatedRouterPriority ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "The values defined for the priority of a system for -+ becoming the designated router." -+ SYNTAX Integer32 (0..'FF'h) -+ -+TOSType ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "Type of Service is defined as a mapping to the IP Type of -+ Service Flags as defined in the IP Forwarding Table MIB -+ -+ +-----+-----+-----+-----+-----+-----+-----+-----+ -+ | | | | -+ | PRECEDENCE | TYPE OF SERVICE | 0 | -+ | | | | -+ +-----+-----+-----+-----+-----+-----+-----+-----+ -+ -+ IP TOS IP TOS -+ Field Policy Field Policy -+ -+ Contents Code Contents Code -+ 0 0 0 0 ==> 0 0 0 0 1 ==> 2 -+ 0 0 1 0 ==> 4 0 0 1 1 ==> 6 -+ 0 1 0 0 ==> 8 0 1 0 1 ==> 10 -+ 0 1 1 0 ==> 12 0 1 1 1 ==> 14 -+ 1 0 0 0 ==> 16 1 0 0 1 ==> 18 -+ 1 0 1 0 ==> 20 1 0 1 1 ==> 22 -+ 1 1 0 0 ==> 24 1 1 0 1 ==> 26 -+ 1 1 1 0 ==> 28 1 1 1 1 ==> 30 -+ -+ The remaining values are left for future definition." -+ SYNTAX Integer32 (0..30) -+ -+ -+-- OSPF General Variables -+ -+-- These parameters apply globally to the Router's -+-- OSPF Process. -+ -+ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 } -+ -+ -+ ospfRouterId OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "A 32-bit integer uniquely identifying the -+ router in the Autonomous System. -+ -+ By convention, to ensure uniqueness, this -+ should default to the value of one of the -+ router's IP interface addresses." -+ REFERENCE -+ "OSPF Version 2, C.1 Global parameters" -+ ::= { ospfGeneralGroup 1 } -+ -+ -+ ospfAdminStat OBJECT-TYPE -+ SYNTAX Status -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The administrative status of OSPF in the -+ router. The value 'enabled' denotes that the -+ OSPF Process is active on at least one inter- -+ face; 'disabled' disables it on all inter- -+ faces." -+ ::= { ospfGeneralGroup 2 } -+ -+ ospfVersionNumber OBJECT-TYPE -+ SYNTAX INTEGER { version2 (2) } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The current version number of the OSPF proto- -+ col is 2." -+ REFERENCE -+ "OSPF Version 2, Title" -+ ::= { ospfGeneralGroup 3 } -+ -+ -+ ospfAreaBdrRtrStatus OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A flag to note whether this router is an area -+ border router." -+ REFERENCE -+ "OSPF Version 2, Section 3 Splitting the AS into -+ Areas" -+ ::= { ospfGeneralGroup 4 } -+ -+ -+ ospfASBdrRtrStatus OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "A flag to note whether this router is config- -+ ured as an Autonomous System border router." -+ REFERENCE -+ "OSPF Version 2, Section 3.3 Classification of -+ routers" -+ ::= { ospfGeneralGroup 5 } -+ -+ ospfExternLsaCount OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of external (LS type 5) link-state -+ advertisements in the link-state database." -+ REFERENCE -+ "OSPF Version 2, Appendix A.4.5 AS external link -+ advertisements" -+ ::= { ospfGeneralGroup 6 } -+ -+ -+ ospfExternLsaCksumSum OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32-bit unsigned sum of the LS checksums of -+ the external link-state advertisements con- -+ tained in the link-state database. This sum -+ can be used to determine if there has been a -+ change in a router's link state database, and -+ to compare the link-state database of two -+ routers." -+ ::= { ospfGeneralGroup 7 } -+ -+ -+ ospfTOSSupport OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The router's support for type-of-service rout- -+ ing." -+ REFERENCE -+ "OSPF Version 2, Appendix F.1.2 Optional TOS -+ support" -+ ::= { ospfGeneralGroup 8 } -+ -+ ospfOriginateNewLsas OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of new link-state advertisements -+ that have been originated. This number is in- -+ cremented each time the router originates a new -+ LSA." -+ ::= { ospfGeneralGroup 9 } -+ -+ -+ ospfRxNewLsas OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of link-state advertisements re- -+ ceived determined to be new instantiations. -+ This number does not include newer instantia- -+ tions of self-originated link-state advertise- -+ ments." -+ ::= { ospfGeneralGroup 10 } -+ -+ ospfExtLsdbLimit OBJECT-TYPE -+ SYNTAX Integer32 (-1..'7FFFFFFF'h) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The maximum number of non-default AS- -+ external-LSAs entries that can be stored in the -+ link-state database. If the value is -1, then -+ there is no limit. -+ -+ When the number of non-default AS-external-LSAs -+ in a router's link-state database reaches -+ ospfExtLsdbLimit, the router enters Overflow- -+ State. The router never holds more than -+ ospfExtLsdbLimit non-default AS-external-LSAs -+ in its database. OspfExtLsdbLimit MUST be set -+ identically in all routers attached to the OSPF -+ backbone and/or any regular OSPF area. (i.e., -+ OSPF stub areas and NSSAs are excluded)." -+ DEFVAL { -1 } -+ ::= { ospfGeneralGroup 11 } -+ -+ ospfMulticastExtensions OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "A Bit Mask indicating whether the router is -+ forwarding IP multicast (Class D) datagrams -+ based on the algorithms defined in the Multi- -+ cast Extensions to OSPF. -+ -+ Bit 0, if set, indicates that the router can -+ forward IP multicast datagrams in the router's -+ directly attached areas (called intra-area mul- -+ ticast routing). -+ -+ Bit 1, if set, indicates that the router can -+ forward IP multicast datagrams between OSPF -+ areas (called inter-area multicast routing). -+ -+ Bit 2, if set, indicates that the router can -+ forward IP multicast datagrams between Auto- -+ nomous Systems (called inter-AS multicast rout- -+ ing). -+ -+ Only certain combinations of bit settings are -+ allowed, namely: 0 (no multicast forwarding is -+ enabled), 1 (intra-area multicasting only), 3 -+ (intra-area and inter-area multicasting), 5 -+ (intra-area and inter-AS multicasting) and 7 -+ (multicasting everywhere). By default, no mul- -+ ticast forwarding is enabled." -+ DEFVAL { 0 } -+ ::= { ospfGeneralGroup 12 } -+ -+ ospfExitOverflowInterval OBJECT-TYPE -+ SYNTAX PositiveInteger -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The number of seconds that, after entering -+ OverflowState, a router will attempt to leave -+ OverflowState. This allows the router to again -+ originate non-default AS-external-LSAs. When -+ set to 0, the router will not leave Overflow- -+ State until restarted." -+ DEFVAL { 0 } -+ ::= { ospfGeneralGroup 13 } -+ -+ -+ ospfDemandExtensions OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "The router's support for demand routing." -+ REFERENCE -+ "OSPF Version 2, Appendix on Demand Routing" -+ ::= { ospfGeneralGroup 14 } -+ -+ -+-- The OSPF Area Data Structure contains information -+-- regarding the various areas. The interfaces and -+-- virtual links are configured as part of these areas. -+-- Area 0.0.0.0, by definition, is the Backbone Area -+ -+ -+ ospfAreaTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfAreaEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information describing the configured parame- -+ ters and cumulative statistics of the router's -+ attached areas." -+ REFERENCE -+ "OSPF Version 2, Section 6 The Area Data Struc- -+ ture" -+ ::= { ospf 2 } -+ -+ -+ ospfAreaEntry OBJECT-TYPE -+ SYNTAX OspfAreaEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information describing the configured parame- -+ ters and cumulative statistics of one of the -+ router's attached areas." -+ INDEX { ospfAreaId } -+ ::= { ospfAreaTable 1 } -+ -+OspfAreaEntry ::= -+ SEQUENCE { -+ ospfAreaId -+ AreaID, -+ ospfAuthType -+ Integer32, -+ ospfImportAsExtern -+ INTEGER, -+ ospfSpfRuns -+ Counter32, -+ ospfAreaBdrRtrCount -+ Gauge32, -+ ospfAsBdrRtrCount -+ Gauge32, -+ ospfAreaLsaCount -+ Gauge32, -+ ospfAreaLsaCksumSum -+ Integer32, -+ ospfAreaSummary -+ INTEGER, -+ ospfAreaStatus -+ RowStatus -+ } -+ -+ ospfAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A 32-bit integer uniquely identifying an area. -+ Area ID 0.0.0.0 is used for the OSPF backbone." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaEntry 1 } -+ -+ -+ ospfAuthType OBJECT-TYPE -+ SYNTAX Integer32 -+ -- none (0), -+ -- simplePassword (1) -+ -- md5 (2) -+ -- reserved for specification by IANA (> 2) -+ MAX-ACCESS read-create -+ STATUS obsolete -+ DESCRIPTION -+ "The authentication type specified for an area. -+ Additional authentication types may be assigned -+ locally on a per Area basis." -+ REFERENCE -+ "OSPF Version 2, Appendix E Authentication" -+ DEFVAL { 0 } -- no authentication, by default -+ ::= { ospfAreaEntry 2 } -+ -+ ospfImportAsExtern OBJECT-TYPE -+ SYNTAX INTEGER { -+ importExternal (1), -+ importNoExternal (2), -+ importNssa (3) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The area's support for importing AS external -+ link- state advertisements." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ DEFVAL { importExternal } -+ ::= { ospfAreaEntry 3 } -+ -+ -+ ospfSpfRuns OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of times that the intra-area route -+ table has been calculated using this area's -+ link-state database. This is typically done -+ using Dijkstra's algorithm." -+ ::= { ospfAreaEntry 4 } -+ -+ -+ ospfAreaBdrRtrCount OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of area border routers reach- -+ able within this area. This is initially zero, -+ and is calculated in each SPF Pass." -+ ::= { ospfAreaEntry 5 } -+ -+ ospfAsBdrRtrCount OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of Autonomous System border -+ routers reachable within this area. This is -+ initially zero, and is calculated in each SPF -+ Pass." -+ ::= { ospfAreaEntry 6 } -+ -+ -+ ospfAreaLsaCount OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The total number of link-state advertisements -+ in this area's link-state database, excluding -+ AS External LSA's." -+ ::= { ospfAreaEntry 7 } -+ -+ -+ ospfAreaLsaCksumSum OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32-bit unsigned sum of the link-state ad- -+ vertisements' LS checksums contained in this -+ area's link-state database. This sum excludes -+ external (LS type 5) link-state advertisements. -+ The sum can be used to determine if there has -+ been a change in a router's link state data- -+ base, and to compare the link-state database of -+ two routers." -+ DEFVAL { 0 } -+ ::= { ospfAreaEntry 8 } -+ -+ ospfAreaSummary OBJECT-TYPE -+ SYNTAX INTEGER { -+ noAreaSummary (1), -+ sendAreaSummary (2) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The variable ospfAreaSummary controls the im- -+ port of summary LSAs into stub areas. It has -+ no effect on other areas. -+ -+ If it is noAreaSummary, the router will neither -+ originate nor propagate summary LSAs into the -+ stub area. It will rely entirely on its de- -+ fault route. -+ -+ If it is sendAreaSummary, the router will both -+ summarize and propagate summary LSAs." -+ DEFVAL { noAreaSummary } -+ ::= { ospfAreaEntry 9 } -+ -+ -+ ospfAreaStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfAreaEntry 10 } -+ -+ -+-- OSPF Area Default Metric Table -+ -+-- The OSPF Area Default Metric Table describes the metrics -+-- that a default Area Border Router will advertise into a -+-- Stub area. -+ -+ -+ ospfStubAreaTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfStubAreaEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The set of metrics that will be advertised by -+ a default Area Border Router into a stub area." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2, Area Parameters" -+ ::= { ospf 3 } -+ -+ -+ ospfStubAreaEntry OBJECT-TYPE -+ SYNTAX OspfStubAreaEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The metric for a given Type of Service that -+ will be advertised by a default Area Border -+ Router into a stub area." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2, Area Parameters" -+ INDEX { ospfStubAreaId, ospfStubTOS } -+ ::= { ospfStubAreaTable 1 } -+ -+OspfStubAreaEntry ::= -+ SEQUENCE { -+ ospfStubAreaId -+ AreaID, -+ ospfStubTOS -+ TOSType, -+ ospfStubMetric -+ BigMetric, -+ ospfStubStatus -+ RowStatus, -+ ospfStubMetricType -+ INTEGER -+ } -+ -+ ospfStubAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32 bit identifier for the Stub Area. On -+ creation, this can be derived from the in- -+ stance." -+ ::= { ospfStubAreaEntry 1 } -+ -+ -+ ospfStubTOS OBJECT-TYPE -+ SYNTAX TOSType -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Type of Service associated with the -+ metric. On creation, this can be derived from -+ the instance." -+ ::= { ospfStubAreaEntry 2 } -+ -+ -+ ospfStubMetric OBJECT-TYPE -+ SYNTAX BigMetric -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The metric value applied at the indicated type -+ of service. By default, this equals the least -+ metric at the type of service among the inter- -+ faces to other areas." -+ ::= { ospfStubAreaEntry 3 } -+ -+ -+ ospfStubStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfStubAreaEntry 4 } -+ -+ ospfStubMetricType OBJECT-TYPE -+ SYNTAX INTEGER { -+ ospfMetric (1), -- OSPF Metric -+ comparableCost (2), -- external type 1 -+ nonComparable (3) -- external type 2 -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the type of metric ad- -+ vertised as a default route." -+ DEFVAL { ospfMetric } -+ ::= { ospfStubAreaEntry 5 } -+ -+-- OSPF Link State Database -+ -+-- The Link State Database contains the Link State -+-- Advertisements from throughout the areas that the -+-- device is attached to. -+ -+ -+ ospfLsdbTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfLsdbEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The OSPF Process's Link State Database." -+ REFERENCE -+ "OSPF Version 2, Section 12 Link State Adver- -+ tisements" -+ ::= { ospf 4 } -+ -+ -+ ospfLsdbEntry OBJECT-TYPE -+ SYNTAX OspfLsdbEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A single Link State Advertisement." -+ INDEX { ospfLsdbAreaId, ospfLsdbType, -+ ospfLsdbLsid, ospfLsdbRouterId } -+ ::= { ospfLsdbTable 1 } -+ -+OspfLsdbEntry ::= -+ SEQUENCE { -+ ospfLsdbAreaId -+ AreaID, -+ ospfLsdbType -+ INTEGER, -+ ospfLsdbLsid -+ IpAddress, -+ ospfLsdbRouterId -+ RouterID, -+ ospfLsdbSequence -+ Integer32, -+ ospfLsdbAge -+ Integer32, -+ ospfLsdbChecksum -+ Integer32, -+ ospfLsdbAdvertisement -+ OCTET STRING -+ } -+ ospfLsdbAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32 bit identifier of the Area from which -+ the LSA was received." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfLsdbEntry 1 } -+ -+-- External Link State Advertisements are permitted -+-- for backward compatibility, but should be displayed in -+-- the ospfExtLsdbTable rather than here. -+ -+ ospfLsdbType OBJECT-TYPE -+ SYNTAX INTEGER { -+ routerLink (1), -+ networkLink (2), -+ summaryLink (3), -+ asSummaryLink (4), -+ asExternalLink (5), -- but see ospfExtLsdbTable -+ multicastLink (6), -+ nssaExternalLink (7) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The type of the link state advertisement. -+ Each link state type has a separate advertise- -+ ment format." -+ REFERENCE -+ "OSPF Version 2, Appendix A.4.1 The Link State -+ Advertisement header" -+ ::= { ospfLsdbEntry 2 } -+ -+ ospfLsdbLsid OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Link State ID is an LS Type Specific field -+ containing either a Router ID or an IP Address; -+ it identifies the piece of the routing domain -+ that is being described by the advertisement." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.4 Link State ID" -+ ::= { ospfLsdbEntry 3 } -+ ospfLsdbRouterId OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32 bit number that uniquely identifies the -+ originating router in the Autonomous System." -+ REFERENCE -+ "OSPF Version 2, Appendix C.1 Global parameters" -+ ::= { ospfLsdbEntry 4 } -+ -+-- Note that the OSPF Sequence Number is a 32 bit signed -+-- integer. It starts with the value '80000001'h, -+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -+-- Thus, a typical sequence number will be very negative. -+ -+ ospfLsdbSequence OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The sequence number field is a signed 32-bit -+ integer. It is used to detect old and dupli- -+ cate link state advertisements. The space of -+ sequence numbers is linearly ordered. The -+ larger the sequence number the more recent the -+ advertisement." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.6 LS sequence -+ number" -+ ::= { ospfLsdbEntry 5 } -+ -+ -+ ospfLsdbAge OBJECT-TYPE -+ SYNTAX Integer32 -- Should be 0..MaxAge -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This field is the age of the link state adver- -+ tisement in seconds." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.1 LS age" -+ ::= { ospfLsdbEntry 6 } -+ -+ ospfLsdbChecksum OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This field is the checksum of the complete -+ contents of the advertisement, excepting the -+ age field. The age field is excepted so that -+ an advertisement's age can be incremented -+ without updating the checksum. The checksum -+ used is the same that is used for ISO connec- -+ tionless datagrams; it is commonly referred to -+ as the Fletcher checksum." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.7 LS checksum" -+ ::= { ospfLsdbEntry 7 } -+ -+ -+ ospfLsdbAdvertisement OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (1..65535)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The entire Link State Advertisement, including -+ its header." -+ REFERENCE -+ "OSPF Version 2, Section 12 Link State Adver- -+ tisements" -+ ::= { ospfLsdbEntry 8 } -+ -+ -+-- Address Range Table -+ -+-- The Address Range Table acts as an adjunct to the Area -+-- Table; It describes those Address Range Summaries that -+-- are configured to be propagated from an Area to reduce -+-- the amount of information about it which is known beyond -+-- its borders. -+ -+ ospfAreaRangeTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfAreaRangeEntry -+ MAX-ACCESS not-accessible -+ STATUS obsolete -+ DESCRIPTION -+ "A range if IP addresses specified by an IP -+ address/IP network mask pair. For example, -+ class B address range of X.X.X.X with a network -+ mask of 255.255.0.0 includes all IP addresses -+ from X.X.0.0 to X.X.255.255" -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospf 5 } -+ ospfAreaRangeEntry OBJECT-TYPE -+ SYNTAX OspfAreaRangeEntry -+ MAX-ACCESS not-accessible -+ STATUS obsolete -+ DESCRIPTION -+ "A range if IP addresses specified by an IP -+ address/IP network mask pair. For example, -+ class B address range of X.X.X.X with a network -+ mask of 255.255.0.0 includes all IP addresses -+ from X.X.0.0 to X.X.255.255" -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet } -+ ::= { ospfAreaRangeTable 1 } -+ -+OspfAreaRangeEntry ::= -+ SEQUENCE { -+ ospfAreaRangeAreaId -+ AreaID, -+ ospfAreaRangeNet -+ IpAddress, -+ ospfAreaRangeMask -+ IpAddress, -+ ospfAreaRangeStatus -+ RowStatus, -+ ospfAreaRangeEffect -+ INTEGER -+ } -+ -+ ospfAreaRangeAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The Area the Address Range is to be found -+ within." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaRangeEntry 1 } -+ -+ -+ ospfAreaRangeNet OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS obsolete -+ DESCRIPTION -+ "The IP Address of the Net or Subnet indicated -+ by the range." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaRangeEntry 2 } -+ -+ -+ ospfAreaRangeMask OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-create -+ STATUS obsolete -+ DESCRIPTION -+ "The Subnet Mask that pertains to the Net or -+ Subnet." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaRangeEntry 3 } -+ -+ ospfAreaRangeStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS obsolete -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfAreaRangeEntry 4 } -+ -+ -+ ospfAreaRangeEffect OBJECT-TYPE -+ SYNTAX INTEGER { -+ advertiseMatching (1), -+ doNotAdvertiseMatching (2) -+ } -+ MAX-ACCESS read-create -+ STATUS obsolete -+ DESCRIPTION -+ "Subnets subsumed by ranges either trigger the -+ advertisement of the indicated summary (adver- -+ tiseMatching), or result in the subnet's not -+ being advertised at all outside the area." -+ DEFVAL { advertiseMatching } -+ ::= { ospfAreaRangeEntry 5 } -+ -+ -+ -+-- OSPF Host Table -+ -+-- The Host/Metric Table indicates what hosts are directly -+-- attached to the Router, and what metrics and types of -+-- service should be advertised for them. -+ -+ ospfHostTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfHostEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The list of Hosts, and their metrics, that the -+ router will advertise as host routes." -+ REFERENCE -+ "OSPF Version 2, Appendix C.6 Host route param- -+ eters" -+ ::= { ospf 6 } -+ -+ -+ ospfHostEntry OBJECT-TYPE -+ SYNTAX OspfHostEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A metric to be advertised, for a given type of -+ service, when a given host is reachable." -+ INDEX { ospfHostIpAddress, ospfHostTOS } -+ ::= { ospfHostTable 1 } -+ -+OspfHostEntry ::= -+ SEQUENCE { -+ ospfHostIpAddress -+ IpAddress, -+ ospfHostTOS -+ TOSType, -+ ospfHostMetric -+ Metric, -+ ospfHostStatus -+ RowStatus, -+ ospfHostAreaID -+ AreaID -+ } -+ -+ ospfHostIpAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of the Host." -+ REFERENCE -+ "OSPF Version 2, Appendix C.6 Host route parame- -+ ters" -+ ::= { ospfHostEntry 1 } -+ -+ -+ ospfHostTOS OBJECT-TYPE -+ SYNTAX TOSType -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Type of Service of the route being config- -+ ured." -+ REFERENCE -+ "OSPF Version 2, Appendix C.6 Host route parame- -+ ters" -+ ::= { ospfHostEntry 2 } -+ -+ -+ ospfHostMetric OBJECT-TYPE -+ SYNTAX Metric -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The Metric to be advertised." -+ REFERENCE -+ "OSPF Version 2, Appendix C.6 Host route parame- -+ ters" -+ ::= { ospfHostEntry 3 } -+ -+ ospfHostStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfHostEntry 4 } -+ -+ -+ ospfHostAreaID OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Area the Host Entry is to be found within. -+ By default, the area that a subsuming OSPF in- -+ terface is in, or 0.0.0.0" -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfHostEntry 5 } -+ -+ -+-- OSPF Interface Table -+ -+-- The OSPF Interface Table augments the ipAddrTable -+-- with OSPF specific information. -+ -+ ospfIfTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfIfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The OSPF Interface Table describes the inter- -+ faces from the viewpoint of OSPF." -+ REFERENCE -+ "OSPF Version 2, Appendix C.3 Router interface -+ parameters" -+ ::= { ospf 7 } -+ -+ -+ ospfIfEntry OBJECT-TYPE -+ SYNTAX OspfIfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The OSPF Interface Entry describes one inter- -+ face from the viewpoint of OSPF." -+ INDEX { ospfIfIpAddress, ospfAddressLessIf } -+ ::= { ospfIfTable 1 } -+ -+OspfIfEntry ::= -+ SEQUENCE { -+ ospfIfIpAddress -+ IpAddress, -+ ospfAddressLessIf -+ Integer32, -+ ospfIfAreaId -+ AreaID, -+ ospfIfType -+ INTEGER, -+ ospfIfAdminStat -+ Status, -+ ospfIfRtrPriority -+ DesignatedRouterPriority, -+ ospfIfTransitDelay -+ UpToMaxAge, -+ ospfIfRetransInterval -+ UpToMaxAge, -+ ospfIfHelloInterval -+ HelloRange, -+ ospfIfRtrDeadInterval -+ PositiveInteger, -+ ospfIfPollInterval -+ PositiveInteger, -+ ospfIfState -+ INTEGER, -+ ospfIfDesignatedRouter -+ IpAddress, -+ ospfIfBackupDesignatedRouter -+ IpAddress, -+ ospfIfEvents -+ Counter32, -+ ospfIfAuthType -+ INTEGER, -+ ospfIfAuthKey -+ OCTET STRING, -+ ospfIfStatus -+ RowStatus, -+ ospfIfMulticastForwarding -+ INTEGER, -+ ospfIfDemand -+ TruthValue -+ } -+ -+ ospfIfIpAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address of this OSPF interface." -+ ::= { ospfIfEntry 1 } -+ -+ ospfAddressLessIf OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "For the purpose of easing the instancing of -+ addressed and addressless interfaces; This -+ variable takes the value 0 on interfaces with -+ IP Addresses, and the corresponding value of -+ ifIndex for interfaces having no IP Address." -+ ::= { ospfIfEntry 2 } -+ ospfIfAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "A 32-bit integer uniquely identifying the area -+ to which the interface connects. Area ID -+ 0.0.0.0 is used for the OSPF backbone." -+ DEFVAL { '00000000'H } -- 0.0.0.0 -+ ::= { ospfIfEntry 3 } -+ -+ ospfIfType OBJECT-TYPE -+ SYNTAX INTEGER { -+ broadcast (1), -+ nbma (2), -+ pointToPoint (3), -+ pointToMultipoint (5) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The OSPF interface type. -+ -+ By way of a default, this field may be intuited -+ from the corresponding value of ifType. Broad- -+ cast LANs, such as Ethernet and IEEE 802.5, -+ take the value 'broadcast', X.25 and similar -+ technologies take the value 'nbma', and links -+ that are definitively point to point take the -+ value 'pointToPoint'." -+ ::= { ospfIfEntry 4 } -+ -+ -+ ospfIfAdminStat OBJECT-TYPE -+ SYNTAX Status -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The OSPF interface's administrative status. -+ The value formed on the interface, and the in- -+ terface will be advertised as an internal route -+ to some area. The value 'disabled' denotes -+ that the interface is external to OSPF." -+ DEFVAL { enabled } -+ ::= { ospfIfEntry 5 } -+ -+ ospfIfRtrPriority OBJECT-TYPE -+ SYNTAX DesignatedRouterPriority -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The priority of this interface. Used in -+ multi-access networks, this field is used in -+ the designated router election algorithm. The -+ value 0 signifies that the router is not eligi- -+ ble to become the designated router on this -+ particular network. In the event of a tie in -+ this value, routers will use their Router ID as -+ a tie breaker." -+ DEFVAL { 1 } -+ ::= { ospfIfEntry 6 } -+ -+ -+ ospfIfTransitDelay OBJECT-TYPE -+ SYNTAX UpToMaxAge -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The estimated number of seconds it takes to -+ transmit a link state update packet over this -+ interface." -+ DEFVAL { 1 } -+ ::= { ospfIfEntry 7 } -+ -+ -+ ospfIfRetransInterval OBJECT-TYPE -+ SYNTAX UpToMaxAge -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The number of seconds between link-state ad- -+ vertisement retransmissions, for adjacencies -+ belonging to this interface. This value is -+ also used when retransmitting database descrip- -+ tion and link-state request packets." -+ DEFVAL { 5 } -+ ::= { ospfIfEntry 8 } -+ -+ -+ ospfIfHelloInterval OBJECT-TYPE -+ SYNTAX HelloRange -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The length of time, in seconds, between the -+ Hello packets that the router sends on the in- -+ terface. This value must be the same for all -+ routers attached to a common network." -+ DEFVAL { 10 } -+ ::= { ospfIfEntry 9 } -+ -+ -+ ospfIfRtrDeadInterval OBJECT-TYPE -+ SYNTAX PositiveInteger -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The number of seconds that a router's Hello -+ packets have not been seen before it's neigh- -+ bors declare the router down. This should be -+ some multiple of the Hello interval. This -+ value must be the same for all routers attached -+ to a common network." -+ DEFVAL { 40 } -+ ::= { ospfIfEntry 10 } -+ -+ -+ ospfIfPollInterval OBJECT-TYPE -+ SYNTAX PositiveInteger -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The larger time interval, in seconds, between -+ the Hello packets sent to an inactive non- -+ broadcast multi- access neighbor." -+ DEFVAL { 120 } -+ ::= { ospfIfEntry 11 } -+ -+ -+ ospfIfState OBJECT-TYPE -+ SYNTAX INTEGER { -+ down (1), -+ loopback (2), -+ waiting (3), -+ pointToPoint (4), -+ designatedRouter (5), -+ backupDesignatedRouter (6), -+ otherDesignatedRouter (7) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The OSPF Interface State." -+ DEFVAL { down } -+ ::= { ospfIfEntry 12 } -+ -+ -+ ospfIfDesignatedRouter OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of the Designated Router." -+ DEFVAL { '00000000'H } -- 0.0.0.0 -+ ::= { ospfIfEntry 13 } -+ -+ -+ ospfIfBackupDesignatedRouter OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of the Backup Designated -+ Router." -+ DEFVAL { '00000000'H } -- 0.0.0.0 -+ ::= { ospfIfEntry 14 } -+ -+ ospfIfEvents OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of times this OSPF interface has -+ changed its state, or an error has occurred." -+ ::= { ospfIfEntry 15 } -+ -+ -+ ospfIfAuthKey OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE (0..256)) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The Authentication Key. If the Area's Author- -+ ization Type is simplePassword, and the key -+ length is shorter than 8 octets, the agent will -+ left adjust and zero fill to 8 octets. -+ -+ Note that unauthenticated interfaces need no -+ authentication key, and simple password authen- -+ tication cannot use a key of more than 8 oc- -+ tets. Larger keys are useful only with authen- -+ tication mechanisms not specified in this docu- -+ ment. -+ -+ When read, ospfIfAuthKey always returns an Oc- -+ tet String of length zero." -+ REFERENCE -+ "OSPF Version 2, Section 9 The Interface Data -+ Structure" -+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 -+ ::= { ospfIfEntry 16 } -+ -+ ospfIfStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfIfEntry 17 } -+ -+ -+ ospfIfMulticastForwarding OBJECT-TYPE -+ SYNTAX INTEGER { -+ blocked (1), -- no multicast forwarding -+ multicast (2), -- using multicast address -+ unicast (3) -- to each OSPF neighbor -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The way multicasts should forwarded on this -+ interface; not forwarded, forwarded as data -+ link multicasts, or forwarded as data link uni- -+ casts. Data link multicasting is not meaning- -+ ful on point to point and NBMA interfaces, and -+ setting ospfMulticastForwarding to 0 effective- -+ ly disables all multicast forwarding." -+ DEFVAL { blocked } -+ ::= { ospfIfEntry 18 } -+ -+ -+ ospfIfDemand OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "Indicates whether Demand OSPF procedures (hel- -+ lo supression to FULL neighbors and setting the -+ DoNotAge flag on proogated LSAs) should be per- -+ formed on this interface." -+ DEFVAL { false } -+ ::= { ospfIfEntry 19 } -+ -+ -+ ospfIfAuthType OBJECT-TYPE -+ SYNTAX INTEGER (0..255) -+ -- none (0), -+ -- simplePassword (1) -+ -- md5 (2) -+ -- reserved for specification by IANA (> 2) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The authentication type specified for an in- -+ terface. Additional authentication types may -+ be assigned locally." -+ REFERENCE -+ "OSPF Version 2, Appendix E Authentication" -+ DEFVAL { 0 } -- no authentication, by default -+ ::= { ospfIfEntry 20 } -+ -+ -+-- OSPF Interface Metric Table -+ -+-- The Metric Table describes the metrics to be advertised -+-- for a specified interface at the various types of service. -+-- As such, this table is an adjunct of the OSPF Interface -+-- Table. -+ -+-- Types of service, as defined by RFC 791, have the ability -+-- to request low delay, high bandwidth, or reliable linkage. -+ -+-- For the purposes of this specification, the measure of -+-- bandwidth -+ -+-- Metric = 10^8 / ifSpeed -+ -+-- is the default value. For multiple link interfaces, note -+-- that ifSpeed is the sum of the individual link speeds. -+-- This yields a number having the following typical values: -+ -+-- Network Type/bit rate Metric -+ -+-- >= 100 MBPS 1 -+-- Ethernet/802.3 10 -+-- E1 48 -+-- T1 (ESF) 65 -+-- 64 KBPS 1562 -+-- 56 KBPS 1785 -+-- 19.2 KBPS 5208 -+-- 9.6 KBPS 10416 -+ -+-- Routes that are not specified use the default (TOS 0) metric -+ -+ ospfIfMetricTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfIfMetricEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The TOS metrics for a non-virtual interface -+ identified by the interface index." -+ REFERENCE -+ "OSPF Version 2, Appendix C.3 Router interface -+ parameters" -+ ::= { ospf 8 } -+ -+ ospfIfMetricEntry OBJECT-TYPE -+ SYNTAX OspfIfMetricEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A particular TOS metric for a non-virtual in- -+ terface identified by the interface index." -+ REFERENCE -+ "OSPF Version 2, Appendix C.3 Router interface -+ parameters" -+ INDEX { ospfIfMetricIpAddress, -+ ospfIfMetricAddressLessIf, -+ ospfIfMetricTOS } -+ ::= { ospfIfMetricTable 1 } -+ -+OspfIfMetricEntry ::= -+ SEQUENCE { -+ ospfIfMetricIpAddress -+ IpAddress, -+ ospfIfMetricAddressLessIf -+ Integer32, -+ ospfIfMetricTOS -+ TOSType, -+ ospfIfMetricValue -+ Metric, -+ ospfIfMetricStatus -+ RowStatus -+ } -+ -+ ospfIfMetricIpAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address of this OSPF interface. On row -+ creation, this can be derived from the in- -+ stance." -+ ::= { ospfIfMetricEntry 1 } -+ -+ ospfIfMetricAddressLessIf OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "For the purpose of easing the instancing of -+ addressed and addressless interfaces; This -+ variable takes the value 0 on interfaces with -+ IP Addresses, and the value of ifIndex for in- -+ terfaces having no IP Address. On row crea- -+ tion, this can be derived from the instance." -+ ::= { ospfIfMetricEntry 2 } -+ -+ -+ ospfIfMetricTOS OBJECT-TYPE -+ SYNTAX TOSType -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The type of service metric being referenced. -+ On row creation, this can be derived from the -+ instance." -+ ::= { ospfIfMetricEntry 3 } -+ -+ -+ ospfIfMetricValue OBJECT-TYPE -+ SYNTAX Metric -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The metric of using this type of service on -+ this interface. The default value of the TOS 0 -+ Metric is 10^8 / ifSpeed." -+ ::= { ospfIfMetricEntry 4 } -+ -+ ospfIfMetricStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfIfMetricEntry 5 } -+ -+ -+-- OSPF Virtual Interface Table -+ -+-- The Virtual Interface Table describes the virtual -+-- links that the OSPF Process is configured to -+-- carry on. -+ -+ ospfVirtIfTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfVirtIfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information about this router's virtual inter- -+ faces." -+ REFERENCE -+ "OSPF Version 2, Appendix C.4 Virtual link -+ parameters" -+ ::= { ospf 9 } -+ -+ -+ ospfVirtIfEntry OBJECT-TYPE -+ SYNTAX OspfVirtIfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information about a single Virtual Interface." -+ INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor } -+ ::= { ospfVirtIfTable 1 } -+ -+OspfVirtIfEntry ::= -+ SEQUENCE { -+ ospfVirtIfAreaId -+ AreaID, -+ ospfVirtIfNeighbor -+ RouterID, -+ ospfVirtIfTransitDelay -+ UpToMaxAge, -+ ospfVirtIfRetransInterval -+ UpToMaxAge, -+ ospfVirtIfHelloInterval -+ HelloRange, -+ ospfVirtIfRtrDeadInterval -+ PositiveInteger, -+ ospfVirtIfState -+ INTEGER, -+ ospfVirtIfEvents -+ Counter32, -+ ospfVirtIfAuthType -+ INTEGER, -+ ospfVirtIfAuthKey -+ OCTET STRING, -+ ospfVirtIfStatus -+ RowStatus -+ } -+ -+ ospfVirtIfAreaId OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Transit Area that the Virtual Link -+ traverses. By definition, this is not 0.0.0.0" -+ ::= { ospfVirtIfEntry 1 } -+ -+ -+ ospfVirtIfNeighbor OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Router ID of the Virtual Neighbor." -+ ::= { ospfVirtIfEntry 2 } -+ -+ -+ ospfVirtIfTransitDelay OBJECT-TYPE -+ SYNTAX UpToMaxAge -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The estimated number of seconds it takes to -+ transmit a link- state update packet over this -+ interface." -+ DEFVAL { 1 } -+ ::= { ospfVirtIfEntry 3 } -+ -+ -+ ospfVirtIfRetransInterval OBJECT-TYPE -+ SYNTAX UpToMaxAge -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The number of seconds between link-state ad- -+ vertisement retransmissions, for adjacencies -+ belonging to this interface. This value is -+ also used when retransmitting database descrip- -+ tion and link-state request packets. This -+ value should be well over the expected round- -+ trip time." -+ DEFVAL { 5 } -+ ::= { ospfVirtIfEntry 4 } -+ -+ -+ ospfVirtIfHelloInterval OBJECT-TYPE -+ SYNTAX HelloRange -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The length of time, in seconds, between the -+ Hello packets that the router sends on the in- -+ terface. This value must be the same for the -+ virtual neighbor." -+ DEFVAL { 10 } -+ ::= { ospfVirtIfEntry 5 } -+ -+ -+ ospfVirtIfRtrDeadInterval OBJECT-TYPE -+ SYNTAX PositiveInteger -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The number of seconds that a router's Hello -+ packets have not been seen before it's neigh- -+ bors declare the router down. This should be -+ some multiple of the Hello interval. This -+ value must be the same for the virtual neigh- -+ bor." -+ DEFVAL { 60 } -+ ::= { ospfVirtIfEntry 6 } -+ -+ -+ ospfVirtIfState OBJECT-TYPE -+ SYNTAX INTEGER { -+ down (1), -- these use the same encoding -+ pointToPoint (4) -- as the ospfIfTable -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "OSPF virtual interface states." -+ DEFVAL { down } -+ ::= { ospfVirtIfEntry 7 } -+ -+ -+ ospfVirtIfEvents OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of state changes or error events on -+ this Virtual Link" -+ ::= { ospfVirtIfEntry 8 } -+ -+ -+ ospfVirtIfAuthKey OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE(0..256)) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "If Authentication Type is simplePassword, the -+ device will left adjust and zero fill to 8 oc- -+ tets. -+ -+ Note that unauthenticated interfaces need no -+ authentication key, and simple password authen- -+ tication cannot use a key of more than 8 oc- -+ tets. Larger keys are useful only with authen- -+ tication mechanisms not specified in this docu- -+ ment. -+ -+ When read, ospfVifAuthKey always returns a -+ string of length zero." -+ REFERENCE -+ "OSPF Version 2, Section 9 The Interface Data -+ Structure" -+ DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 -+ ::= { ospfVirtIfEntry 9 } -+ -+ -+ ospfVirtIfStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfVirtIfEntry 10 } -+ -+ -+ ospfVirtIfAuthType OBJECT-TYPE -+ SYNTAX INTEGER (0..255) -+ -- none (0), -+ -- simplePassword (1) -+ -- md5 (2) -+ -- reserved for specification by IANA (> 2) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The authentication type specified for a virtu- -+ al interface. Additional authentication types -+ may be assigned locally." -+ REFERENCE -+ "OSPF Version 2, Appendix E Authentication" -+ DEFVAL { 0 } -- no authentication, by default -+ ::= { ospfVirtIfEntry 11 } -+ -+ -+-- OSPF Neighbor Table -+ -+-- The OSPF Neighbor Table describes all neighbors in -+-- the locality of the subject router. -+ -+ ospfNbrTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfNbrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A table of non-virtual neighbor information." -+ REFERENCE -+ "OSPF Version 2, Section 10 The Neighbor Data -+ Structure" -+ ::= { ospf 10 } -+ -+ -+ ospfNbrEntry OBJECT-TYPE -+ SYNTAX OspfNbrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The information regarding a single neighbor." -+ REFERENCE -+ "OSPF Version 2, Section 10 The Neighbor Data -+ Structure" -+ INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex } -+ ::= { ospfNbrTable 1 } -+ -+OspfNbrEntry ::= -+ SEQUENCE { -+ ospfNbrIpAddr -+ IpAddress, -+ ospfNbrAddressLessIndex -+ InterfaceIndex, -+ ospfNbrRtrId -+ RouterID, -+ ospfNbrOptions -+ Integer32, -+ ospfNbrPriority -+ DesignatedRouterPriority, -+ ospfNbrState -+ INTEGER, -+ ospfNbrEvents -+ Counter32, -+ ospfNbrLsRetransQLen -+ Gauge32, -+ ospfNbmaNbrStatus -+ RowStatus, -+ ospfNbmaNbrPermanence -+ INTEGER, -+ ospfNbrHelloSuppressed -+ TruthValue -+ } -+ -+ ospfNbrIpAddr OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address this neighbor is using in its -+ IP Source Address. Note that, on addressless -+ links, this will not be 0.0.0.0, but the ad- -+ dress of another of the neighbor's interfaces." -+ ::= { ospfNbrEntry 1 } -+ -+ -+ ospfNbrAddressLessIndex OBJECT-TYPE -+ SYNTAX InterfaceIndex -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "On an interface having an IP Address, zero. -+ On addressless interfaces, the corresponding -+ value of ifIndex in the Internet Standard MIB. -+ On row creation, this can be derived from the -+ instance." -+ ::= { ospfNbrEntry 2 } -+ -+ -+ ospfNbrRtrId OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A 32-bit integer (represented as a type IpAd- -+ dress) uniquely identifying the neighboring -+ router in the Autonomous System." -+ DEFVAL { '00000000'H } -- 0.0.0.0 -+ ::= { ospfNbrEntry 3 } -+ -+ -+ ospfNbrOptions OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A Bit Mask corresponding to the neighbor's op- -+ tions field. -+ -+ Bit 0, if set, indicates that the system will -+ operate on Type of Service metrics other than -+ TOS 0. If zero, the neighbor will ignore all -+ metrics except the TOS 0 metric. -+ -+ Bit 1, if set, indicates that the associated -+ area accepts and operates on external informa- -+ tion; if zero, it is a stub area. -+ -+ Bit 2, if set, indicates that the system is ca- -+ pable of routing IP Multicast datagrams; i.e., -+ that it implements the Multicast Extensions to -+ OSPF. -+ -+ Bit 3, if set, indicates that the associated -+ area is an NSSA. These areas are capable of -+ carrying type 7 external advertisements, which -+ are translated into type 5 external advertise- -+ ments at NSSA borders." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.2 Options" -+ DEFVAL { 0 } -+ ::= { ospfNbrEntry 4 } -+ -+ -+ ospfNbrPriority OBJECT-TYPE -+ SYNTAX DesignatedRouterPriority -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The priority of this neighbor in the designat- -+ ed router election algorithm. The value 0 sig- -+ nifies that the neighbor is not eligible to be- -+ come the designated router on this particular -+ network." -+ DEFVAL { 1 } -+ ::= { ospfNbrEntry 5 } -+ -+ -+ ospfNbrState OBJECT-TYPE -+ SYNTAX INTEGER { -+ down (1), -+ attempt (2), -+ init (3), -+ twoWay (4), -+ exchangeStart (5), -+ exchange (6), -+ loading (7), -+ full (8) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The State of the relationship with this Neigh- -+ bor." -+ REFERENCE -+ "OSPF Version 2, Section 10.1 Neighbor States" -+ DEFVAL { down } -+ ::= { ospfNbrEntry 6 } -+ -+ -+ ospfNbrEvents OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of times this neighbor relationship -+ has changed state, or an error has occurred." -+ ::= { ospfNbrEntry 7 } -+ -+ -+ ospfNbrLsRetransQLen OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The current length of the retransmission -+ queue." -+ ::= { ospfNbrEntry 8 } -+ -+ -+ ospfNbmaNbrStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfNbrEntry 9 } -+ -+ -+ ospfNbmaNbrPermanence OBJECT-TYPE -+ SYNTAX INTEGER { -+ dynamic (1), -- learned through protocol -+ permanent (2) -- configured address -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. 'dynamic' and 'permanent' refer to how -+ the neighbor became known." -+ DEFVAL { permanent } -+ ::= { ospfNbrEntry 10 } -+ -+ -+ ospfNbrHelloSuppressed OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Indicates whether Hellos are being suppressed -+ to the neighbor" -+ ::= { ospfNbrEntry 11 } -+ -+ -+-- OSPF Virtual Neighbor Table -+ -+-- This table describes all virtual neighbors. -+-- Since Virtual Links are configured in the -+-- virtual interface table, this table is read-only. -+ -+ ospfVirtNbrTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfVirtNbrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A table of virtual neighbor information." -+ REFERENCE -+ "OSPF Version 2, Section 15 Virtual Links" -+ ::= { ospf 11 } -+ -+ -+ ospfVirtNbrEntry OBJECT-TYPE -+ SYNTAX OspfVirtNbrEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Virtual neighbor information." -+ INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId } -+ ::= { ospfVirtNbrTable 1 } -+ -+OspfVirtNbrEntry ::= -+ SEQUENCE { -+ ospfVirtNbrArea -+ AreaID, -+ ospfVirtNbrRtrId -+ RouterID, -+ ospfVirtNbrIpAddr -+ IpAddress, -+ ospfVirtNbrOptions -+ Integer32, -+ ospfVirtNbrState -+ INTEGER, -+ ospfVirtNbrEvents -+ Counter32, -+ ospfVirtNbrLsRetransQLen -+ Gauge32, -+ ospfVirtNbrHelloSuppressed -+ TruthValue -+ } -+ -+ ospfVirtNbrArea OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Transit Area Identifier." -+ ::= { ospfVirtNbrEntry 1 } -+ -+ -+ ospfVirtNbrRtrId OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A 32-bit integer uniquely identifying the -+ neighboring router in the Autonomous System." -+ ::= { ospfVirtNbrEntry 2 } -+ -+ -+ ospfVirtNbrIpAddr OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address this Virtual Neighbor is us- -+ ing." -+ ::= { ospfVirtNbrEntry 3 } -+ -+ -+ ospfVirtNbrOptions OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "A Bit Mask corresponding to the neighbor's op- -+ tions field. -+ -+ Bit 1, if set, indicates that the system will -+ operate on Type of Service metrics other than -+ TOS 0. If zero, the neighbor will ignore all -+ metrics except the TOS 0 metric. -+ -+ Bit 2, if set, indicates that the system is -+ Network Multicast capable; ie, that it imple- -+ ments OSPF Multicast Routing." -+ ::= { ospfVirtNbrEntry 4 } -+ ospfVirtNbrState OBJECT-TYPE -+ SYNTAX INTEGER { -+ down (1), -+ attempt (2), -+ init (3), -+ twoWay (4), -+ exchangeStart (5), -+ exchange (6), -+ loading (7), -+ full (8) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The state of the Virtual Neighbor Relation- -+ ship." -+ ::= { ospfVirtNbrEntry 5 } -+ -+ -+ ospfVirtNbrEvents OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of times this virtual link has -+ changed its state, or an error has occurred." -+ ::= { ospfVirtNbrEntry 6 } -+ -+ -+ ospfVirtNbrLsRetransQLen OBJECT-TYPE -+ SYNTAX Gauge32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The current length of the retransmission -+ queue." -+ ::= { ospfVirtNbrEntry 7 } -+ -+ -+ ospfVirtNbrHelloSuppressed OBJECT-TYPE -+ SYNTAX TruthValue -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Indicates whether Hellos are being suppressed -+ to the neighbor" -+ ::= { ospfVirtNbrEntry 8 } -+ -+-- OSPF Link State Database, External -+ -+-- The Link State Database contains the Link State -+-- Advertisements from throughout the areas that the -+-- device is attached to. -+ -+-- This table is identical to the OSPF LSDB Table in -+-- format, but contains only External Link State -+-- Advertisements. The purpose is to allow external -+-- LSAs to be displayed once for the router rather -+-- than once in each non-stub area. -+ -+ ospfExtLsdbTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfExtLsdbEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "The OSPF Process's Links State Database." -+ REFERENCE -+ "OSPF Version 2, Section 12 Link State Adver- -+ tisements" -+ ::= { ospf 12 } -+ -+ -+ ospfExtLsdbEntry OBJECT-TYPE -+ SYNTAX OspfExtLsdbEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A single Link State Advertisement." -+ INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId } -+ ::= { ospfExtLsdbTable 1 } -+ -+OspfExtLsdbEntry ::= -+ SEQUENCE { -+ ospfExtLsdbType -+ INTEGER, -+ ospfExtLsdbLsid -+ IpAddress, -+ ospfExtLsdbRouterId -+ RouterID, -+ ospfExtLsdbSequence -+ Integer32, -+ ospfExtLsdbAge -+ Integer32, -+ ospfExtLsdbChecksum -+ Integer32, -+ ospfExtLsdbAdvertisement -+ OCTET STRING -+ } -+ -+ ospfExtLsdbType OBJECT-TYPE -+ SYNTAX INTEGER { -+ asExternalLink (5) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The type of the link state advertisement. -+ Each link state type has a separate advertise- -+ ment format." -+ REFERENCE -+ "OSPF Version 2, Appendix A.4.1 The Link State -+ Advertisement header" -+ ::= { ospfExtLsdbEntry 1 } -+ -+ -+ ospfExtLsdbLsid OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Link State ID is an LS Type Specific field -+ containing either a Router ID or an IP Address; -+ it identifies the piece of the routing domain -+ that is being described by the advertisement." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.4 Link State ID" -+ ::= { ospfExtLsdbEntry 2 } -+ -+ -+ ospfExtLsdbRouterId OBJECT-TYPE -+ SYNTAX RouterID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The 32 bit number that uniquely identifies the -+ originating router in the Autonomous System." -+ REFERENCE -+ "OSPF Version 2, Appendix C.1 Global parameters" -+ ::= { ospfExtLsdbEntry 3 } -+ -+-- Note that the OSPF Sequence Number is a 32 bit signed -+-- integer. It starts with the value '80000001'h, -+-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -+-- Thus, a typical sequence number will be very negative. -+ ospfExtLsdbSequence OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The sequence number field is a signed 32-bit -+ integer. It is used to detect old and dupli- -+ cate link state advertisements. The space of -+ sequence numbers is linearly ordered. The -+ larger the sequence number the more recent the -+ advertisement." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.6 LS sequence -+ number" -+ ::= { ospfExtLsdbEntry 4 } -+ -+ -+ ospfExtLsdbAge OBJECT-TYPE -+ SYNTAX Integer32 -- Should be 0..MaxAge -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This field is the age of the link state adver- -+ tisement in seconds." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.1 LS age" -+ ::= { ospfExtLsdbEntry 5 } -+ -+ -+ ospfExtLsdbChecksum OBJECT-TYPE -+ SYNTAX Integer32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "This field is the checksum of the complete -+ contents of the advertisement, excepting the -+ age field. The age field is excepted so that -+ an advertisement's age can be incremented -+ without updating the checksum. The checksum -+ used is the same that is used for ISO connec- -+ tionless datagrams; it is commonly referred to -+ as the Fletcher checksum." -+ REFERENCE -+ "OSPF Version 2, Section 12.1.7 LS checksum" -+ ::= { ospfExtLsdbEntry 6 } -+ -+ -+ ospfExtLsdbAdvertisement OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE(36)) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The entire Link State Advertisement, including -+ its header." -+ REFERENCE -+ "OSPF Version 2, Section 12 Link State Adver- -+ tisements" -+ ::= { ospfExtLsdbEntry 7 } -+ -+ -+-- OSPF Use of the CIDR Route Table -+ -+ospfRouteGroup OBJECT IDENTIFIER ::= { ospf 13 } -+ -+-- The IP Forwarding Table defines a number of objects for use by -+-- the routing protocol to externalize its information. Most of -+-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy, -+-- ipForwardNextHop, ipForwardIfIndex, ipForwardType, -+-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are -+-- defined there. -+ -+-- Those that leave some discretion are defined here. -+ -+-- ipCidrRouteProto is, of course, ospf (13). -+ -+-- ipCidrRouteAge is the time since the route was first calculated, -+-- as opposed to the time since the last SPF run. -+ -+-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing -+-- protocol. The following values shall be found there depending -+-- on the way the route was calculated. -+ -+ospfIntraArea OBJECT IDENTIFIER ::= { ospfRouteGroup 1 } -+ospfInterArea OBJECT IDENTIFIER ::= { ospfRouteGroup 2 } -+ospfExternalType1 OBJECT IDENTIFIER ::= { ospfRouteGroup 3 } -+ospfExternalType2 OBJECT IDENTIFIER ::= { ospfRouteGroup 4 } -+ -+-- ipCidrRouteMetric1 is, by definition, the primary routing -+-- metric. Therefore, it should be the metric that route -+-- selection is based on. For intra-area and inter-area routes, -+-- it is an OSPF metric. For External Type 1 (comparable value) -+-- routes, it is an OSPF metric plus the External Metric. For -+-- external Type 2 (non-comparable value) routes, it is the -+-- external metric. -+ -+-- ipCidrRouteMetric2 is, by definition, a secondary routing -+-- metric. Therefore, it should be the metric that breaks a tie -+-- among routes having equal metric1 values and the same -+-- calculation rule. For intra-area, inter-area routes, and -+-- External Type 1 (comparable value) routes, it is unused. For -+-- external Type 2 (non-comparable value) routes, it is the metric -+-- to the AS border router. -+ -+-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are -+-- unused. -+ -+-- -+-- The OSPF Area Aggregate Table -+-- -+-- This table replaces the OSPF Area Summary Table, being an -+-- extension of that for CIDR routers. -+ -+ ospfAreaAggregateTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF OspfAreaAggregateEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A range of IP addresses specified by an IP -+ address/IP network mask pair. For example, -+ class B address range of X.X.X.X with a network -+ mask of 255.255.0.0 includes all IP addresses -+ from X.X.0.0 to X.X.255.255. Note that if -+ ranges are configured such that one range sub- -+ sumes another range (e.g., 10.0.0.0 mask -+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the -+ most specific match is the preferred one." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospf 14 } -+ -+ -+ ospfAreaAggregateEntry OBJECT-TYPE -+ SYNTAX OspfAreaAggregateEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A range of IP addresses specified by an IP -+ address/IP network mask pair. For example, -+ class B address range of X.X.X.X with a network -+ mask of 255.255.0.0 includes all IP addresses -+ from X.X.0.0 to X.X.255.255. Note that if -+ ranges are range configured such that one range -+ subsumes another range (e.g., 10.0.0.0 mask -+ 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the -+ most specific match is the preferred one." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType, -+ ospfAreaAggregateNet, ospfAreaAggregateMask } -+ ::= { ospfAreaAggregateTable 1 } -+ -+ -+OspfAreaAggregateEntry ::= -+ SEQUENCE { -+ ospfAreaAggregateAreaID -+ AreaID, -+ ospfAreaAggregateLsdbType -+ INTEGER, -+ ospfAreaAggregateNet -+ IpAddress, -+ ospfAreaAggregateMask -+ IpAddress, -+ ospfAreaAggregateStatus -+ RowStatus, -+ ospfAreaAggregateEffect -+ INTEGER -+ } -+ -+ ospfAreaAggregateAreaID OBJECT-TYPE -+ SYNTAX AreaID -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Area the Address Aggregate is to be found -+ within." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaAggregateEntry 1 } -+ -+ -+ ospfAreaAggregateLsdbType OBJECT-TYPE -+ SYNTAX INTEGER { -+ summaryLink (3), -+ nssaExternalLink (7) -+ } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The type of the Address Aggregate. This field -+ specifies the Lsdb type that this Address Ag- -+ gregate applies to." -+ REFERENCE -+ "OSPF Version 2, Appendix A.4.1 The Link State -+ Advertisement header" -+ ::= { ospfAreaAggregateEntry 2 } -+ -+ -+ ospfAreaAggregateNet OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of the Net or Subnet indicated -+ by the range." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaAggregateEntry 3 } -+ -+ -+ ospfAreaAggregateMask OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The Subnet Mask that pertains to the Net or -+ Subnet." -+ REFERENCE -+ "OSPF Version 2, Appendix C.2 Area parameters" -+ ::= { ospfAreaAggregateEntry 4 } -+ -+ -+ ospfAreaAggregateStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable displays the status of the en- -+ try. Setting it to 'invalid' has the effect of -+ rendering it inoperative. The internal effect -+ (row removal) is implementation dependent." -+ ::= { ospfAreaAggregateEntry 5 } -+ -+ -+ ospfAreaAggregateEffect OBJECT-TYPE -+ SYNTAX INTEGER { -+ advertiseMatching (1), -+ doNotAdvertiseMatching (2) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "Subnets subsumed by ranges either trigger the -+ advertisement of the indicated aggregate (ad- -+ vertiseMatching), or result in the subnet's not -+ being advertised at all outside the area." -+ DEFVAL { advertiseMatching } -+ ::= { ospfAreaAggregateEntry 6 } -+ -+ -+-- conformance information -+ -+ospfConformance OBJECT IDENTIFIER ::= { ospf 15 } -+ -+ospfGroups OBJECT IDENTIFIER ::= { ospfConformance 1 } -+ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 } -+ -+-- compliance statements -+ -+ ospfCompliance MODULE-COMPLIANCE -+ STATUS current -+ DESCRIPTION -+ "The compliance statement " -+ MODULE -- this module -+ MANDATORY-GROUPS { -+ ospfBasicGroup, -+ ospfAreaGroup, -+ ospfStubAreaGroup, -+ ospfIfGroup, -+ ospfIfMetricGroup, -+ ospfVirtIfGroup, -+ ospfNbrGroup, -+ ospfVirtNbrGroup, -+ ospfAreaAggregateGroup -+ } -+ ::= { ospfCompliances 1 } -+ -+ -+-- units of conformance -+ -+ ospfBasicGroup OBJECT-GROUP -+ OBJECTS { -+ ospfRouterId, -+ ospfAdminStat, -+ ospfVersionNumber, -+ ospfAreaBdrRtrStatus, -+ ospfASBdrRtrStatus, -+ ospfExternLsaCount, -+ ospfExternLsaCksumSum, -+ ospfTOSSupport, -+ ospfOriginateNewLsas, -+ ospfRxNewLsas, -+ ospfExtLsdbLimit, -+ ospfMulticastExtensions, -+ ospfExitOverflowInterval, -+ ospfDemandExtensions -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 1 } -+ -+ -+ ospfAreaGroup OBJECT-GROUP -+ OBJECTS { -+ ospfAreaId, -+ ospfImportAsExtern, -+ ospfSpfRuns, -+ ospfAreaBdrRtrCount, -+ ospfAsBdrRtrCount, -+ ospfAreaLsaCount, -+ ospfAreaLsaCksumSum, -+ ospfAreaSummary, -+ ospfAreaStatus -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems -+ supporting areas." -+ ::= { ospfGroups 2 } -+ -+ -+ ospfStubAreaGroup OBJECT-GROUP -+ OBJECTS { -+ ospfStubAreaId, -+ ospfStubTOS, -+ ospfStubMetric, -+ ospfStubStatus, -+ ospfStubMetricType -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems -+ supporting stub areas." -+ ::= { ospfGroups 3 } -+ -+ -+ ospfLsdbGroup OBJECT-GROUP -+ OBJECTS { -+ ospfLsdbAreaId, -+ ospfLsdbType, -+ ospfLsdbLsid, -+ ospfLsdbRouterId, -+ ospfLsdbSequence, -+ ospfLsdbAge, -+ ospfLsdbChecksum, -+ ospfLsdbAdvertisement -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems -+ that display their link state database." -+ ::= { ospfGroups 4 } -+ -+ -+ ospfAreaRangeGroup OBJECT-GROUP -+ OBJECTS { -+ ospfAreaRangeAreaId, -+ ospfAreaRangeNet, -+ ospfAreaRangeMask, -+ ospfAreaRangeStatus, -+ ospfAreaRangeEffect -+ } -+ STATUS obsolete -+ DESCRIPTION -+ "These objects are required for non-CIDR OSPF -+ systems that support multiple areas." -+ ::= { ospfGroups 5 } -+ -+ -+ ospfHostGroup OBJECT-GROUP -+ OBJECTS { -+ ospfHostIpAddress, -+ ospfHostTOS, -+ ospfHostMetric, -+ ospfHostStatus, -+ ospfHostAreaID -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems -+ that support attached hosts." -+ ::= { ospfGroups 6 } -+ -+ -+ ospfIfGroup OBJECT-GROUP -+ OBJECTS { -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfIfAreaId, -+ ospfIfType, -+ ospfIfAdminStat, -+ ospfIfRtrPriority, -+ ospfIfTransitDelay, -+ ospfIfRetransInterval, -+ ospfIfHelloInterval, -+ ospfIfRtrDeadInterval, -+ ospfIfPollInterval, -+ ospfIfState, -+ ospfIfDesignatedRouter, -+ ospfIfBackupDesignatedRouter, -+ ospfIfEvents, -+ ospfIfAuthType, -+ ospfIfAuthKey, -+ ospfIfStatus, -+ ospfIfMulticastForwarding, -+ ospfIfDemand -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 7 } -+ -+ -+ ospfIfMetricGroup OBJECT-GROUP -+ OBJECTS { -+ ospfIfMetricIpAddress, -+ ospfIfMetricAddressLessIf, -+ ospfIfMetricTOS, -+ ospfIfMetricValue, -+ ospfIfMetricStatus -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 8 } -+ -+ -+ ospfVirtIfGroup OBJECT-GROUP -+ OBJECTS { -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfVirtIfTransitDelay, -+ ospfVirtIfRetransInterval, -+ ospfVirtIfHelloInterval, -+ ospfVirtIfRtrDeadInterval, -+ ospfVirtIfState, -+ ospfVirtIfEvents, -+ ospfVirtIfAuthType, -+ ospfVirtIfAuthKey, -+ ospfVirtIfStatus -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 9 } -+ -+ -+ ospfNbrGroup OBJECT-GROUP -+ OBJECTS { -+ ospfNbrIpAddr, -+ ospfNbrAddressLessIndex, -+ ospfNbrRtrId, -+ ospfNbrOptions, -+ ospfNbrPriority, -+ ospfNbrState, -+ ospfNbrEvents, -+ ospfNbrLsRetransQLen, -+ ospfNbmaNbrStatus, -+ ospfNbmaNbrPermanence, -+ ospfNbrHelloSuppressed -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 10 } -+ -+ -+ ospfVirtNbrGroup OBJECT-GROUP -+ OBJECTS { -+ ospfVirtNbrArea, -+ ospfVirtNbrRtrId, -+ ospfVirtNbrIpAddr, -+ ospfVirtNbrOptions, -+ ospfVirtNbrState, -+ ospfVirtNbrEvents, -+ ospfVirtNbrLsRetransQLen, -+ ospfVirtNbrHelloSuppressed -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 11 } -+ -+ -+ ospfExtLsdbGroup OBJECT-GROUP -+ OBJECTS { -+ ospfExtLsdbType, -+ ospfExtLsdbLsid, -+ ospfExtLsdbRouterId, -+ ospfExtLsdbSequence, -+ ospfExtLsdbAge, -+ ospfExtLsdbChecksum, -+ ospfExtLsdbAdvertisement -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems -+ that display their link state database." -+ ::= { ospfGroups 12 } -+ -+ -+ ospfAreaAggregateGroup OBJECT-GROUP -+ OBJECTS { -+ ospfAreaAggregateAreaID, -+ ospfAreaAggregateLsdbType, -+ ospfAreaAggregateNet, -+ ospfAreaAggregateMask, -+ ospfAreaAggregateStatus, -+ ospfAreaAggregateEffect -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required for OSPF systems." -+ ::= { ospfGroups 13 } -+ -+END -diff -ruN net-snmp-5.1.2-orig/mibs/OSPF-TRAP-MIB.txt net-snmp-5.1.2-5/mibs/OSPF-TRAP-MIB.txt ---- net-snmp-5.1.2-orig/mibs/OSPF-TRAP-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/OSPF-TRAP-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,443 @@ -+OSPF-TRAP-MIB DEFINITIONS ::= BEGIN -+ -+ IMPORTS -+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress -+ FROM SNMPv2-SMI -+ MODULE-COMPLIANCE, OBJECT-GROUP -+ FROM SNMPv2-CONF -+ ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState, -+ ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState, -+ ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId, -+ ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState, -+ ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId, -+ ospfExtLsdbLimit, ospf -+ FROM OSPF-MIB; -+ -+ ospfTrap MODULE-IDENTITY -+ LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995 -+ ORGANIZATION "IETF OSPF Working Group" -+ CONTACT-INFO -+ " Fred Baker -+ Postal: Cisco Systems -+ 519 Lado Drive -+ Santa Barbara, California 93111 -+ Tel: +1 805 681 0115 -+ E-Mail: fred@cisco.com -+ -+ Rob Coltun -+ Postal: RainbowBridge Communications -+ Tel: (301) 340-9416 -+ E-Mail: rcoltun@rainbow-bridge.com" -+ DESCRIPTION -+ "The MIB module to describe traps for the OSPF -+ Version 2 Protocol." -+ ::= { ospf 16 } -+ -+-- Trap Support Objects -+ -+-- The following are support objects for the OSPF traps. -+ -+ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 } -+ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 } -+ -+ ospfSetTrap OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE(4)) -+ MAX-ACCESS read-write -+ STATUS current -+ DESCRIPTION -+ "A four-octet string serving as a bit map for -+ the trap events defined by the OSPF traps. This -+ object is used to enable and disable specific -+ OSPF traps where a 1 in the bit field -+ represents enabled. The right-most bit (least -+ significant) represents trap 0." -+ ::= { ospfTrapControl 1 } -+ -+ -+ ospfConfigErrorType OBJECT-TYPE -+ SYNTAX INTEGER { -+ badVersion (1), -+ areaMismatch (2), -+ unknownNbmaNbr (3), -- Router is Dr eligible -+ unknownVirtualNbr (4), -+ authTypeMismatch(5), -+ authFailure (6), -+ netMaskMismatch (7), -+ helloIntervalMismatch (8), -+ deadIntervalMismatch (9), -+ optionMismatch (10) } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "Potential types of configuration conflicts. -+ Used by the ospfConfigError and ospfConfigVir- -+ tError traps." -+ ::= { ospfTrapControl 2 } -+ -+ -+ ospfPacketType OBJECT-TYPE -+ SYNTAX INTEGER { -+ hello (1), -+ dbDescript (2), -+ lsReq (3), -+ lsUpdate (4), -+ lsAck (5) } -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "OSPF packet types." -+ ::= { ospfTrapControl 3 } -+ -+ -+ ospfPacketSrc OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP address of an inbound packet that can- -+ not be identified by a neighbor instance." -+ ::= { ospfTrapControl 4 } -+ -+ -+-- Traps -+ -+ -+ ospfIfStateChange NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfIfState -- The new state -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfStateChange trap signifies that there -+ has been a change in the state of a non-virtual -+ OSPF interface. This trap should be generated -+ when the interface state regresses (e.g., goes -+ from Dr to Down) or progresses to a terminal -+ state (i.e., Point-to-Point, DR Other, Dr, or -+ Backup)." -+ ::= { ospfTraps 16 } -+ -+ -+ ospfVirtIfStateChange NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfVirtIfState -- The new state -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfStateChange trap signifies that there -+ has been a change in the state of an OSPF vir- -+ tual interface. -+ This trap should be generated when the inter- -+ face state regresses (e.g., goes from Point- -+ to-Point to Down) or progresses to a terminal -+ state (i.e., Point-to-Point)." -+ ::= { ospfTraps 1 } -+ -+ -+ ospfNbrStateChange NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfNbrIpAddr, -+ ospfNbrAddressLessIndex, -+ ospfNbrRtrId, -+ ospfNbrState -- The new state -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfNbrStateChange trap signifies that -+ there has been a change in the state of a non- -+ virtual OSPF neighbor. This trap should be -+ generated when the neighbor state regresses -+ (e.g., goes from Attempt or Full to 1-Way or -+ Down) or progresses to a terminal state (e.g., -+ 2-Way or Full). When an neighbor transitions -+ from or to Full on non-broadcast multi-access -+ and broadcast networks, the trap should be gen- -+ erated by the designated router. A designated -+ router transitioning to Down will be noted by -+ ospfIfStateChange." -+ ::= { ospfTraps 2 } -+ -+ -+ ospfVirtNbrStateChange NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtNbrArea, -+ ospfVirtNbrRtrId, -+ ospfVirtNbrState -- The new state -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfStateChange trap signifies that there -+ has been a change in the state of an OSPF vir- -+ tual neighbor. This trap should be generated -+ when the neighbor state regresses (e.g., goes -+ from Attempt or Full to 1-Way or Down) or -+ progresses to a terminal state (e.g., Full)." -+ ::= { ospfTraps 3 } -+ ospfIfConfigError NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfPacketSrc, -- The source IP address -+ ospfConfigErrorType, -- Type of error -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfConfigError trap signifies that a -+ packet has been received on a non-virtual in- -+ terface from a router whose configuration -+ parameters conflict with this router's confi- -+ guration parameters. Note that the event op- -+ tionMismatch should cause a trap only if it -+ prevents an adjacency from forming." -+ ::= { ospfTraps 4 } -+ -+ -+ ospfVirtIfConfigError NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfConfigErrorType, -- Type of error -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfConfigError trap signifies that a pack- -+ et has been received on a virtual interface -+ from a router whose configuration parameters -+ conflict with this router's configuration -+ parameters. Note that the event optionMismatch -+ should cause a trap only if it prevents an ad- -+ jacency from forming." -+ ::= { ospfTraps 5 } -+ -+ -+ ospfIfAuthFailure NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfPacketSrc, -- The source IP address -+ ospfConfigErrorType, -- authTypeMismatch or -+ -- authFailure -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfAuthFailure trap signifies that a -+ packet has been received on a non-virtual in- -+ terface from a router whose authentication key -+ or authentication type conflicts with this -+ router's authentication key or authentication -+ type." -+ ::= { ospfTraps 6 } -+ -+ -+ ospfVirtIfAuthFailure NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfConfigErrorType, -- authTypeMismatch or -+ -- authFailure -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfVirtIfAuthFailure trap signifies that a -+ packet has been received on a virtual interface -+ from a router whose authentication key or au- -+ thentication type conflicts with this router's -+ authentication key or authentication type." -+ ::= { ospfTraps 7 } -+ -+ -+ ospfIfRxBadPacket NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfPacketSrc, -- The source IP address -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfIfRxBadPacket trap signifies that an -+ OSPF packet has been received on a non-virtual -+ interface that cannot be parsed." -+ ::= { ospfTraps 8 } -+ -+ ospfVirtIfRxBadPacket NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfPacketType -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfRxBadPacket trap signifies that an OSPF -+ packet has been received on a virtual interface -+ that cannot be parsed." -+ ::= { ospfTraps 9 } -+ -+ -+ ospfTxRetransmit NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfIfIpAddress, -+ ospfAddressLessIf, -+ ospfNbrRtrId, -- Destination -+ ospfPacketType, -+ ospfLsdbType, -+ ospfLsdbLsid, -+ ospfLsdbRouterId -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfTxRetransmit trap signifies than an -+ OSPF packet has been retransmitted on a non- -+ virtual interface. All packets that may be re- -+ transmitted are associated with an LSDB entry. -+ The LS type, LS ID, and Router ID are used to -+ identify the LSDB entry." -+ ::= { ospfTraps 10 } -+ -+ -+ ospfVirtIfTxRetransmit NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfVirtIfAreaId, -+ ospfVirtIfNeighbor, -+ ospfPacketType, -+ ospfLsdbType, -+ ospfLsdbLsid, -+ ospfLsdbRouterId -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfTxRetransmit trap signifies than an -+ OSPF packet has been retransmitted on a virtual -+ interface. All packets that may be retransmit- -+ ted are associated with an LSDB entry. The LS -+ type, LS ID, and Router ID are used to identify -+ the LSDB entry." -+ ::= { ospfTraps 11 } -+ -+ -+ ospfOriginateLsa NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals -+ ospfLsdbType, -+ ospfLsdbLsid, -+ ospfLsdbRouterId -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfOriginateLsa trap signifies that a new -+ LSA has been originated by this router. This -+ trap should not be invoked for simple refreshes -+ of LSAs (which happesn every 30 minutes), but -+ instead will only be invoked when an LSA is -+ (re)originated due to a topology change. Addi- -+ tionally, this trap does not include LSAs that -+ are being flushed because they have reached -+ MaxAge." -+ ::= { ospfTraps 12 } -+ -+ -+ ospfMaxAgeLsa NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfLsdbAreaId, -- 0.0.0.0 for AS Externals -+ ospfLsdbType, -+ ospfLsdbLsid, -+ ospfLsdbRouterId -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfMaxAgeLsa trap signifies that one of -+ the LSA in the router's link-state database has -+ aged to MaxAge." -+ ::= { ospfTraps 13 } -+ -+ -+ ospfLsdbOverflow NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfExtLsdbLimit -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfLsdbOverflow trap signifies that the -+ number of LSAs in the router's link-state data- -+ base has exceeded ospfExtLsdbLimit." -+ ::= { ospfTraps 14 } -+ -+ -+ ospfLsdbApproachingOverflow NOTIFICATION-TYPE -+ OBJECTS { -+ ospfRouterId, -- The originator of the trap -+ ospfExtLsdbLimit -+ } -+ STATUS current -+ DESCRIPTION -+ "An ospfLsdbApproachingOverflow trap signifies -+ that the number of LSAs in the router's link- -+ state database has exceeded ninety percent of -+ ospfExtLsdbLimit." -+ ::= { ospfTraps 15 } -+ -+ -+-- conformance information -+ -+ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 } -+ -+ospfTrapGroups OBJECT IDENTIFIER ::= { ospfTrapConformance 1 } -+ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 } -+ -+-- compliance statements -+ -+ ospfTrapCompliance MODULE-COMPLIANCE -+ STATUS current -+ DESCRIPTION -+ "The compliance statement " -+ MODULE -- this module -+ MANDATORY-GROUPS { ospfTrapControlGroup } -+ -+ -+ GROUP ospfTrapControlGroup -+ DESCRIPTION -+ "This group is optional but recommended for all -+ OSPF systems" -+ ::= { ospfTrapCompliances 1 } -+ -+ -+-- units of conformance -+ -+ ospfTrapControlGroup OBJECT-GROUP -+ OBJECTS { -+ ospfSetTrap, -+ ospfConfigErrorType, -+ ospfPacketType, -+ ospfPacketSrc -+ } -+ STATUS current -+ DESCRIPTION -+ "These objects are required to control traps -+ from OSPF systems." -+ ::= { ospfTrapGroups 1 } -+ -+ -+END -diff -ruN net-snmp-5.1.2-orig/mibs/RIPv2-MIB.txt net-snmp-5.1.2-5/mibs/RIPv2-MIB.txt ---- net-snmp-5.1.2-orig/mibs/RIPv2-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/RIPv2-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,530 @@ -+ RIPv2-MIB DEFINITIONS ::= BEGIN -+ -+ IMPORTS -+ MODULE-IDENTITY, OBJECT-TYPE, Counter32, -+ TimeTicks, IpAddress FROM SNMPv2-SMI -+ TEXTUAL-CONVENTION, RowStatus FROM SNMPv2-TC -+ MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF -+ mib-2 FROM RFC1213-MIB; -+ -+ -- This MIB module uses the extended OBJECT-TYPE macro as -+ -- defined in [9]. -+ -+ rip2 MODULE-IDENTITY -+ LAST-UPDATED "9407272253Z" -- Wed Jul 27 22:53:04 PDT 1994 -+ ORGANIZATION "IETF RIP-II Working Group" -+ CONTACT-INFO -+ " Fred Baker -+ Postal: Cisco Systems -+ 519 Lado Drive -+ Santa Barbara, California 93111 -+ Tel: +1 805 681 0115 -+ E-Mail: fbaker@cisco.com -+ -+ Postal: Gary Malkin -+ Xylogics, Inc. -+ 53 Third Avenue -+ Burlington, MA 01803 -+ -+ Phone: (617) 272-8140 -+ EMail: gmalkin@Xylogics.COM" -+ DESCRIPTION -+ "The MIB module to describe the RIP2 Version 2 Protocol" -+ ::= { mib-2 23 } -+ -+ -- RIP-2 Management Information Base -+ -+ -- the RouteTag type represents the contents of the -+ -- Route Domain field in the packet header or route entry. -+ -- The use of the Route Domain is deprecated. -+ -+ RouteTag ::= TEXTUAL-CONVENTION -+ STATUS current -+ DESCRIPTION -+ "the RouteTag type represents the contents of the Route Domain -+ field in the packet header or route entry" -+ SYNTAX OCTET STRING (SIZE (2)) -+ -+--4.1 Global Counters -+ -+-- The RIP-2 Globals Group. -+-- Implementation of this group is mandatory for systems -+-- which implement RIP-2. -+ -+-- These counters are intended to facilitate debugging quickly -+-- changing routes or failing neighbors -+ -+rip2Globals OBJECT IDENTIFIER ::= { rip2 1 } -+ -+ rip2GlobalRouteChanges OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of route changes made to the IP Route -+ Database by RIP. This does not include the refresh -+ of a route's age." -+ ::= { rip2Globals 1 } -+ -+ rip2GlobalQueries OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of responses sent to RIP queries -+ from other systems." -+ ::= { rip2Globals 2 } -+ -+--4.2 RIP Interface Tables -+ -+-- RIP Interfaces Groups -+-- Implementation of these Groups is mandatory for systems -+-- which implement RIP-2. -+ -+-- The RIP Interface Status Table. -+ -+ rip2IfStatTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Rip2IfStatEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A list of subnets which require separate -+ status monitoring in RIP." -+ ::= { rip2 2 } -+ -+ rip2IfStatEntry OBJECT-TYPE -+ SYNTAX Rip2IfStatEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A Single Routing Domain in a single Subnet." -+ INDEX { rip2IfStatAddress } -+ ::= { rip2IfStatTable 1 } -+ -+ Rip2IfStatEntry ::= -+ SEQUENCE { -+ rip2IfStatAddress -+ IpAddress, -+ rip2IfStatRcvBadPackets -+ Counter32, -+ rip2IfStatRcvBadRoutes -+ Counter32, -+ rip2IfStatSentUpdates -+ Counter32, -+ rip2IfStatStatus -+ RowStatus -+ } -+ -+ rip2IfStatAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of this system on the indicated -+ subnet. For unnumbered interfaces, the value 0.0.0.N, -+ where the least significant 24 bits (N) is the ifIndex -+ for the IP Interface in network byte order." -+ ::= { rip2IfStatEntry 1 } -+ -+ rip2IfStatRcvBadPackets OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of RIP response packets received by -+ the RIP process which were subsequently discarded -+ for any reason (e.g. a version 0 packet, or an -+ unknown command type)." -+ ::= { rip2IfStatEntry 2 } -+ -+ rip2IfStatRcvBadRoutes OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of routes, in valid RIP packets, -+ which were ignored for any reason (e.g. unknown -+ address family, or invalid metric)." -+ ::= { rip2IfStatEntry 3 } -+ -+ rip2IfStatSentUpdates OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of triggered RIP updates actually -+ sent on this interface. This explicitly does -+ NOT include full updates sent containing new -+ information." -+ ::= { rip2IfStatEntry 4 } -+ -+ rip2IfStatStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "Writing invalid has the effect of deleting -+ this interface." -+ ::= { rip2IfStatEntry 5 } -+ -+-- The RIP Interface Configuration Table. -+ -+ rip2IfConfTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Rip2IfConfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A list of subnets which require separate -+ configuration in RIP." -+ ::= { rip2 3 } -+ -+ rip2IfConfEntry OBJECT-TYPE -+ SYNTAX Rip2IfConfEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A Single Routing Domain in a single Subnet." -+ INDEX { rip2IfConfAddress } -+ ::= { rip2IfConfTable 1 } -+ -+ Rip2IfConfEntry ::= -+ SEQUENCE { -+ rip2IfConfAddress -+ IpAddress, -+ rip2IfConfDomain -+ RouteTag, -+ rip2IfConfAuthType -+ INTEGER, -+ rip2IfConfAuthKey -+ OCTET STRING (SIZE(0..16)), -+ rip2IfConfSend -+ INTEGER, -+ rip2IfConfReceive -+ INTEGER, -+ rip2IfConfDefaultMetric -+ INTEGER, -+ rip2IfConfStatus -+ RowStatus, -+ rip2IfConfSrcAddress -+ IpAddress -+ } -+ -+ rip2IfConfAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address of this system on the indicated -+ subnet. For unnumbered interfaces, the value 0.0.0.N, -+ where the least significant 24 bits (N) is the ifIndex -+ for the IP Interface in network byte order." -+ ::= { rip2IfConfEntry 1 } -+ -+ rip2IfConfDomain OBJECT-TYPE -+ SYNTAX RouteTag -+ MAX-ACCESS read-create -+ STATUS obsolete -+ DESCRIPTION -+ "Value inserted into the Routing Domain field -+ of all RIP packets sent on this interface." -+ DEFVAL { '0000'h } -+ ::= { rip2IfConfEntry 2 } -+ -+ rip2IfConfAuthType OBJECT-TYPE -+ SYNTAX INTEGER { -+ noAuthentication (1), -+ simplePassword (2), -+ md5 (3) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The type of Authentication used on this -+ interface." -+ DEFVAL { noAuthentication } -+ ::= { rip2IfConfEntry 3 } -+ -+ rip2IfConfAuthKey OBJECT-TYPE -+ SYNTAX OCTET STRING (SIZE(0..16)) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The value to be used as the Authentication Key -+ whenever the corresponding instance of -+ rip2IfConfAuthType has a value other than -+ noAuthentication. A modification of the corresponding -+ instance of rip2IfConfAuthType does not modify -+ the rip2IfConfAuthKey value. If a string shorter -+ than 16 octets is supplied, it will be left- -+ justified and padded to 16 octets, on the right, -+ with nulls (0x00). -+ -+ Reading this object always results in an OCTET -+ STRING of length zero; authentication may not -+ be bypassed by reading the MIB object." -+ DEFVAL { ''h } -+ ::= { rip2IfConfEntry 4 } -+ -+ rip2IfConfSend OBJECT-TYPE -+ SYNTAX INTEGER { -+ doNotSend (1), -+ ripVersion1 (2), -+ rip1Compatible (3), -+ ripVersion2 (4), -+ ripV1Demand (5), -+ ripV2Demand (6) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "What the router sends on this interface. -+ ripVersion1 implies sending RIP updates compliant -+ with RFC 1058. rip1Compatible implies -+ broadcasting RIP-2 updates using RFC 1058 route -+ subsumption rules. ripVersion2 implies -+ multicasting RIP-2 updates. ripV1Demand indicates -+ the use of Demand RIP on a WAN interface under RIP -+ Version 1 rules. ripV2Demand indicates the use of -+ Demand RIP on a WAN interface under Version 2 rules." -+ DEFVAL { rip1Compatible } -+ ::= { rip2IfConfEntry 5 } -+ -+ rip2IfConfReceive OBJECT-TYPE -+ SYNTAX INTEGER { -+ rip1 (1), -+ rip2 (2), -+ rip1OrRip2 (3), -+ doNotRecieve (4) -+ } -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This indicates which version of RIP updates -+ are to be accepted. Note that rip2 and -+ rip1OrRip2 implies reception of multicast -+ packets." -+ DEFVAL { rip1OrRip2 } -+ ::= { rip2IfConfEntry 6 } -+ -+ rip2IfConfDefaultMetric OBJECT-TYPE -+ SYNTAX INTEGER ( 0..15 ) -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "This variable indicates the metric that is to -+ be used for the default route entry in RIP updates -+ originated on this interface. A value of zero -+ indicates that no default route should be -+ originated; in this case, a default route via -+ another router may be propagated." -+ ::= { rip2IfConfEntry 7 } -+ -+ rip2IfConfStatus OBJECT-TYPE -+ SYNTAX RowStatus -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "Writing invalid has the effect of deleting -+ this interface." -+ ::= { rip2IfConfEntry 8 } -+ -+ rip2IfConfSrcAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-create -+ STATUS current -+ DESCRIPTION -+ "The IP Address this system will use as a source -+ address on this interface. If it is a numbered -+ interface, this MUST be the same value as -+ rip2IfConfAddress. On unnumbered interfaces, -+ it must be the value of rip2IfConfAddress for -+ some interface on the system." -+ ::= { rip2IfConfEntry 9 } -+ -+--4.3 Peer Table -+ -+-- Peer Table -+ -+-- The RIP Peer Group -+-- Implementation of this Group is Optional -+ -+-- This group provides information about active peer -+-- relationships intended to assist in debugging. An -+-- active peer is a router from which a valid RIP -+-- updated has been heard in the last 180 seconds. -+ -+ rip2PeerTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Rip2PeerEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "A list of RIP Peers." -+ ::= { rip2 4 } -+ -+ rip2PeerEntry OBJECT-TYPE -+ SYNTAX Rip2PeerEntry -+ MAX-ACCESS not-accessible -+ STATUS current -+ DESCRIPTION -+ "Information regarding a single routing peer." -+ INDEX { rip2PeerAddress, rip2PeerDomain } -+ ::= { rip2PeerTable 1 } -+ -+ Rip2PeerEntry ::= -+ SEQUENCE { -+ rip2PeerAddress -+ IpAddress, -+ rip2PeerDomain -+ RouteTag, -+ rip2PeerLastUpdate -+ TimeTicks, -+ rip2PeerVersion -+ INTEGER, -+ rip2PeerRcvBadPackets -+ Counter32, -+ rip2PeerRcvBadRoutes -+ Counter32 -+ } -+ -+ rip2PeerAddress OBJECT-TYPE -+ SYNTAX IpAddress -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The IP Address that the peer is using as its source -+ address. Note that on an unnumbered link, this may -+ not be a member of any subnet on the system." -+ ::= { rip2PeerEntry 1 } -+ -+ rip2PeerDomain OBJECT-TYPE -+ SYNTAX RouteTag -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The value in the Routing Domain field in RIP -+ packets received from the peer. As domain suuport -+ is deprecated, this must be zero." -+ ::= { rip2PeerEntry 2 } -+ -+ rip2PeerLastUpdate OBJECT-TYPE -+ SYNTAX TimeTicks -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The value of sysUpTime when the most recent -+ RIP update was received from this system." -+ ::= { rip2PeerEntry 3 } -+ -+ rip2PeerVersion OBJECT-TYPE -+ SYNTAX INTEGER ( 0..255 ) -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The RIP version number in the header of the -+ last RIP packet received." -+ ::= { rip2PeerEntry 4 } -+ -+ rip2PeerRcvBadPackets OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of RIP response packets from this -+ peer discarded as invalid." -+ ::= { rip2PeerEntry 5 } -+ -+ -+ rip2PeerRcvBadRoutes OBJECT-TYPE -+ SYNTAX Counter32 -+ MAX-ACCESS read-only -+ STATUS current -+ DESCRIPTION -+ "The number of routes from this peer that were -+ ignored because the entry format was invalid." -+ ::= { rip2PeerEntry 6 } -+ -+-- conformance information -+ -+rip2Conformance OBJECT IDENTIFIER ::= { rip2 5 } -+ -+rip2Groups OBJECT IDENTIFIER ::= { rip2Conformance 1 } -+rip2Compliances OBJECT IDENTIFIER ::= { rip2Conformance 2 } -+ -+-- compliance statements -+rip2Compliance MODULE-COMPLIANCE -+ STATUS current -+ DESCRIPTION -+ "The compliance statement " -+ MODULE -- this module -+ MANDATORY-GROUPS { -+ rip2GlobalGroup, -+ rip2IfStatGroup, -+ rip2IfConfGroup, -+ rip2PeerGroup -+ } -+ GROUP rip2GlobalGroup -+ DESCRIPTION -+ "This group defines global controls for RIP-II systems." -+ GROUP rip2IfStatGroup -+ DESCRIPTION -+ "This group defines interface statistics for RIP-II systems." -+ GROUP rip2IfConfGroup -+ DESCRIPTION -+ "This group defines interface configuration for RIP-II systems." -+ GROUP rip2PeerGroup -+ DESCRIPTION -+ "This group defines peer information for RIP-II systems." -+ ::= { rip2Compliances 1 } -+ -+-- units of conformance -+ -+rip2GlobalGroup OBJECT-GROUP -+ OBJECTS { -+ rip2GlobalRouteChanges, -+ rip2GlobalQueries -+ } -+ STATUS current -+ DESCRIPTION -+ "This group defines global controls for RIP-II systems." -+ ::= { rip2Groups 1 } -+rip2IfStatGroup OBJECT-GROUP -+ OBJECTS { -+ rip2IfStatAddress, -+ rip2IfStatRcvBadPackets, -+ rip2IfStatRcvBadRoutes, -+ rip2IfStatSentUpdates, -+ rip2IfStatStatus -+ } -+ STATUS current -+ DESCRIPTION -+ "This group defines interface statistics for RIP-II systems." -+ ::= { rip2Groups 2 } -+rip2IfConfGroup OBJECT-GROUP -+ OBJECTS { -+ rip2IfConfAddress, -+ rip2IfConfAuthType, -+ rip2IfConfAuthKey, -+ rip2IfConfSend, -+ rip2IfConfReceive, -+ rip2IfConfDefaultMetric, -+ rip2IfConfStatus, -+ rip2IfConfSrcAddress -+ } -+ STATUS current -+ DESCRIPTION -+ "This group defines interface configuration for RIP-II systems." -+ ::= { rip2Groups 3 } -+rip2PeerGroup OBJECT-GROUP -+ OBJECTS { -+ rip2PeerAddress, -+ rip2PeerDomain, -+ rip2PeerLastUpdate, -+ rip2PeerVersion, -+ rip2PeerRcvBadPackets, -+ rip2PeerRcvBadRoutes -+ } -+ STATUS current -+ DESCRIPTION -+ "This group defines peer information for RIP-II systems." -+ ::= { rip2Groups 4 } -+END -diff -ruN net-snmp-5.1.2-orig/mibs/SOURCE-ROUTING-MIB.txt net-snmp-5.1.2-5/mibs/SOURCE-ROUTING-MIB.txt ---- net-snmp-5.1.2-orig/mibs/SOURCE-ROUTING-MIB.txt 1970-01-01 01:00:00.000000000 +0100 -+++ net-snmp-5.1.2-5/mibs/SOURCE-ROUTING-MIB.txt 2005-03-13 16:17:21.000000000 +0100 -@@ -0,0 +1,452 @@ -+SOURCE-ROUTING-MIB DEFINITIONS ::= BEGIN -+ -+IMPORTS -+ Counter, Gauge -+ FROM RFC1155-SMI -+ dot1dBridge, dot1dSr -+ FROM BRIDGE-MIB -+ OBJECT-TYPE -+ FROM RFC-1212; -+ -+-- groups in the SR MIB -+ -+-- dot1dSr is imported from the Bridge MIB -+ -+dot1dPortPair OBJECT IDENTIFIER ::= { dot1dBridge 10 } -+ -+-- the dot1dSr group -+ -+-- this group is implemented by those bridges that -+-- support the source route bridging mode, including Source -+-- Routing and SRT bridges. -+ -+dot1dSrPortTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dSrPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains information about every -+ port that is associated with this source route -+ bridge." -+ ::= { dot1dSr 1 } -+ -+dot1dSrPortEntry OBJECT-TYPE -+ SYNTAX Dot1dSrPortEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A list of information for each port of a source -+ route bridge." -+ INDEX { dot1dSrPort } -+ -+ ::= { dot1dSrPortTable 1 } -+ -+Dot1dSrPortEntry ::= -+ SEQUENCE { -+ dot1dSrPort -+ INTEGER, -+ dot1dSrPortHopCount -+ INTEGER, -+ dot1dSrPortLocalSegment -+ INTEGER, -+ dot1dSrPortBridgeNum -+ INTEGER, -+ dot1dSrPortTargetSegment -+ INTEGER, -+ dot1dSrPortLargestFrame -+ INTEGER, -+ dot1dSrPortSTESpanMode -+ INTEGER, -+ dot1dSrPortSpecInFrames -+ Counter, -+ dot1dSrPortSpecOutFrames -+ Counter, -+ dot1dSrPortApeInFrames -+ Counter, -+ dot1dSrPortApeOutFrames -+ Counter, -+ dot1dSrPortSteInFrames -+ Counter, -+ dot1dSrPortSteOutFrames -+ Counter, -+ dot1dSrPortSegmentMismatchDiscards -+ Counter, -+ dot1dSrPortDuplicateSegmentDiscards -+ Counter, -+ dot1dSrPortHopCountExceededDiscards -+ Counter, -+ dot1dSrPortDupLanIdOrTreeErrors -+ Counter, -+ dot1dSrPortLanIdMismatches -+ Counter -+ } -+ -+dot1dSrPort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the port for which this entry -+ -+ contains Source Route management information." -+ ::= { dot1dSrPortEntry 1 } -+ -+dot1dSrPortHopCount OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The maximum number of routing descriptors allowed -+ in an All Paths or Spanning Tree Explorer frames." -+ ::= { dot1dSrPortEntry 2 } -+ -+dot1dSrPortLocalSegment OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The segment number that uniquely identifies the -+ segment to which this port is connected. Current -+ source routing protocols limit this value to the -+ range: 0 through 4095. (The value 0 is used by -+ some management applications for special test -+ cases.) A value of 65535 signifies that no segment -+ number is assigned to this port." -+ ::= { dot1dSrPortEntry 3 } -+ -+dot1dSrPortBridgeNum OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "A bridge number uniquely identifies a bridge when -+ more than one bridge is used to span the same two -+ segments. Current source routing protocols limit -+ this value to the range: 0 through 15. A value of -+ 65535 signifies that no bridge number is assigned -+ to this bridge." -+ ::= { dot1dSrPortEntry 4 } -+ -+dot1dSrPortTargetSegment OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The segment number that corresponds to the target -+ segment this port is considered to be connected to -+ by the bridge. Current source routing protocols -+ limit this value to the range: 0 through 4095. -+ -+ (The value 0 is used by some management -+ applications for special test cases.) A value of -+ 65535 signifies that no target segment is assigned -+ to this port." -+ ::= { dot1dSrPortEntry 5 } -+ -+-- It would be nice if we could use ifMtu as the size of the -+-- largest frame, but we can't because ifMtu is defined to be -+-- the size that the (inter-)network layer can use which can -+-- differ from the MAC layer (especially if several layers of -+-- encapsulation are used). -+ -+dot1dSrPortLargestFrame OBJECT-TYPE -+ SYNTAX INTEGER -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The maximum size of the INFO field (LLC and -+ above) that this port can send/receive. It does -+ not include any MAC level (framing) octets. The -+ value of this object is used by this bridge to -+ determine whether a modification of the -+ LargestFrame (LF, see [14]) field of the Routing -+ Control field of the Routing Information Field is -+ necessary. -+ -+ 64 valid values are defined by the IEEE 802.5M SRT -+ Addendum: 516, 635, 754, 873, 993, 1112, 1231, -+ 1350, 1470, 1542, 1615, 1688, 1761, 1833, 1906, -+ 1979, 2052, 2345, 2638, 2932, 3225, 3518, 3812, -+ 4105, 4399, 4865, 5331, 5798, 6264, 6730, 7197, -+ 7663, 8130, 8539, 8949, 9358, 9768, 10178, 10587, -+ 10997, 11407, 12199, 12992, 13785, 14578, 15370, -+ 16163, 16956, 17749, 20730, 23711, 26693, 29674, -+ 32655, 35637, 38618, 41600, 44591, 47583, 50575, -+ 53567, 56559, 59551, and 65535. -+ -+ An illegal value will not be accepted by the -+ bridge." -+ ::= { dot1dSrPortEntry 6 } -+ -+dot1dSrPortSTESpanMode OBJECT-TYPE -+ SYNTAX INTEGER { -+ auto-span(1), -+ disabled(2), -+ forced(3) -+ } -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "Determines how this port behaves when presented -+ with a Spanning Tree Explorer frame. The value -+ 'disabled(2)' indicates that the port will not -+ accept or send Spanning Tree Explorer packets; any -+ STE packets received will be silently discarded. -+ The value 'forced(3)' indicates the port will -+ always accept and propagate Spanning Tree Explorer -+ frames. This allows a manually configured -+ Spanning Tree for this class of packet to be -+ configured. Note that unlike transparent -+ bridging, this is not catastrophic to the network -+ if there are loops. The value 'auto-span(1)' can -+ only be returned by a bridge that both implements -+ the Spanning Tree Protocol and has use of the -+ protocol enabled on this port. The behavior of the -+ port for Spanning Tree Explorer frames is -+ determined by the state of dot1dStpPortState. If -+ the port is in the 'forwarding' state, the frame -+ will be accepted or propagated. Otherwise, it -+ will be silently discarded." -+ ::= { dot1dSrPortEntry 7 } -+ -+dot1dSrPortSpecInFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of Specifically Routed frames, also -+ referred to as Source Routed Frames, that have -+ been received from this port's segment." -+ ::= { dot1dSrPortEntry 8 } -+ -+dot1dSrPortSpecOutFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of Specifically Routed frames, also -+ referred to as Source Routed Frames, that this -+ port has transmitted on its segment." -+ ::= { dot1dSrPortEntry 9 } -+ -+dot1dSrPortApeInFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of All Paths Explorer frames, also -+ referred to as All Routes Explorer frames, that -+ have been received by this port from its segment." -+ ::= { dot1dSrPortEntry 10 } -+ -+dot1dSrPortApeOutFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of all Paths Explorer Frames, also -+ referred to as All Routes Explorer frames, that -+ have been transmitted by this port on its -+ segment." -+ ::= { dot1dSrPortEntry 11 } -+ -+dot1dSrPortSteInFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of spanning tree explorer frames that -+ have been received by this port from its segment." -+ ::= { dot1dSrPortEntry 12 } -+ -+dot1dSrPortSteOutFrames OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of spanning tree explorer frames that -+ have been transmitted by this port on its -+ segment." -+ ::= { dot1dSrPortEntry 13 } -+ -+dot1dSrPortSegmentMismatchDiscards OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of explorer frames that have been -+ discarded by this port because the routing -+ descriptor field contained an invalid adjacent -+ segment value." -+ ::= { dot1dSrPortEntry 14 } -+ -+dot1dSrPortDuplicateSegmentDiscards OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of frames that have been discarded by -+ this port because the routing descriptor field -+ contained a duplicate segment identifier." -+ ::= { dot1dSrPortEntry 15 } -+ -+dot1dSrPortHopCountExceededDiscards OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of explorer frames that have been -+ discarded by this port because the Routing -+ Information Field has exceeded the maximum route -+ descriptor length." -+ ::= { dot1dSrPortEntry 16 } -+ -+dot1dSrPortDupLanIdOrTreeErrors OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of duplicate LAN IDs or Tree errors. -+ This helps in detection of problems in networks -+ containing older IBM Source Routing Bridges." -+ ::= { dot1dSrPortEntry 17 } -+ -+dot1dSrPortLanIdMismatches OBJECT-TYPE -+ SYNTAX Counter -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The number of ARE and STE frames that were -+ discarded because the last LAN ID in the routing -+ information field did not equal the LAN-in ID. -+ This error can occur in implementations which do -+ only a LAN-in ID and Bridge Number check instead -+ of a LAN-in ID, Bridge Number, and LAN-out ID -+ check before they forward broadcast frames." -+ ::= { dot1dSrPortEntry 18 } -+ -+-- scalar object in dot1dSr -+ -+dot1dSrBridgeLfMode OBJECT-TYPE -+ SYNTAX INTEGER { -+ mode3(1), -+ mode6(2) -+ } -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "Indicates whether the bridge operates using older -+ 3 bit length negotiation fields or the newer 6 bit -+ length field in its RIF." -+ ::= { dot1dSr 2 } -+ -+-- The Port-Pair Database -+ -+-- Implementation of this group is optional. -+ -+-- This group is implemented by those bridges that support -+-- the direct multiport model of the source route bridging -+-- mode as defined in the IEEE 802.5 SRT Addendum to -+-- 802.1d. -+ -+-- Bridges implementing this group may report 65535 for -+-- dot1dSrPortBridgeNumber and dot1dSrPortTargetSegment, -+-- indicating that those objects are not applicable. -+ -+dot1dPortPairTableSize OBJECT-TYPE -+ SYNTAX Gauge -+ ACCESS read-only -+ STATUS mandatory -+ DESCRIPTION -+ "The total number of entries in the Bridge Port -+ Pair Database." -+ ::= { dot1dPortPair 1 } -+ -+-- the Bridge Port-Pair table -+ -+-- this table represents port pairs within a bridge forming -+-- a unique bridge path, as defined in the IEEE 802.5M SRT -+-- Addendum. -+ -+dot1dPortPairTable OBJECT-TYPE -+ SYNTAX SEQUENCE OF Dot1dPortPairEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A table that contains information about every -+ -+ port pair database entity associated with this -+ source routing bridge." -+ ::= { dot1dPortPair 2 } -+ -+dot1dPortPairEntry OBJECT-TYPE -+ SYNTAX Dot1dPortPairEntry -+ ACCESS not-accessible -+ STATUS mandatory -+ DESCRIPTION -+ "A list of information for each port pair entity -+ of a bridge." -+ INDEX { dot1dPortPairLowPort, dot1dPortPairHighPort } -+ ::= { dot1dPortPairTable 1 } -+ -+Dot1dPortPairEntry ::= -+ SEQUENCE { -+ dot1dPortPairLowPort -+ INTEGER, -+ dot1dPortPairHighPort -+ INTEGER, -+ dot1dPortPairBridgeNum -+ INTEGER, -+ dot1dPortPairBridgeState -+ INTEGER -+ } -+ -+dot1dPortPairLowPort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the lower numbered port for -+ which this entry contains port pair database -+ information." -+ ::= { dot1dPortPairEntry 1 } -+ -+dot1dPortPairHighPort OBJECT-TYPE -+ SYNTAX INTEGER (1..65535) -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The port number of the higher numbered port for -+ which this entry contains port pair database -+ information." -+ ::= { dot1dPortPairEntry 2 } -+ -+dot1dPortPairBridgeNum OBJECT-TYPE -+ SYNTAX INTEGER -+ -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "A bridge number that uniquely identifies the path -+ provided by this source routing bridge between the -+ segments connected to dot1dPortPairLowPort and -+ dot1dPortPairHighPort. The purpose of bridge -+ number is to disambiguate between multiple paths -+ connecting the same two LANs." -+ ::= { dot1dPortPairEntry 3 } -+ -+dot1dPortPairBridgeState OBJECT-TYPE -+ SYNTAX INTEGER { -+ enabled(1), -+ disabled(2), -+ invalid(3) -+ } -+ ACCESS read-write -+ STATUS mandatory -+ DESCRIPTION -+ "The state of dot1dPortPairBridgeNum. Writing -+ 'invalid(3)' to this object removes the -+ corresponding entry." -+ ::= { dot1dPortPairEntry 4 } -+ -+END -diff -ruN net-snmp-5.1.2-orig/net-snmp-config.in net-snmp-5.1.2-5/net-snmp-config.in ---- net-snmp-5.1.2-orig/net-snmp-config.in 2004-06-17 15:39:28.000000000 +0200 -+++ net-snmp-5.1.2-5/net-snmp-config.in 2005-03-13 16:17:21.000000000 +0100 -@@ -113,13 +113,13 @@ - #################################################### client lib - --libs) - # use this one == --netsnmp-libs + --external-libs -- echo $NSC_LDFLAGS $NSC_LIBDIR -lnetsnmp $NSC_LIBS -+ echo $NSC_LDFLAGS $NSC_LIBDIR -lnetsnmp $NSC_LIBS @WRAPLIBS@ - ;; - --netsnmp-libs) - echo $NSC_LIBDIR -lnetsnmp - ;; - --external-libs) -- echo $NSC_LDFLAGS $NSC_LIBS -+ echo $NSC_LDFLAGS $NSC_LIBS @WRAPLIBS@ - ;; - #################################################### agent lib - --base-agent-libs) -@@ -130,13 +130,13 @@ - ;; - --agent-libs) - # use this one == --netsnmp-agent-libs + --external-libs -- echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_BASE_AGENT_LIBS $NSC_AGENTLIBS -+ echo $NSC_LDFLAGS $NSC_LIBDIR $NSC_BASE_AGENT_LIBS $NSC_AGENTLIBS @WRAPLIBS@ - ;; - --netsnmp-agent-libs) - echo $NSC_LIBDIR $NSC_BASE_AGENT_LIBS - ;; - --external-agent-libs) -- echo $NSC_LDFLAGS $NSC_AGENTLIBS -+ echo $NSC_LDFLAGS $NSC_AGENTLIBS @WRAPLIBS@ - ;; - #################################################### - --version) -@@ -409,7 +409,7 @@ - echo "Ack. Can't create $tmpfile." - exit 1 - fi -- cmd="@CC@ $cflags @CFLAGS@ @DEVFLAGS@ -I. -I@includedir@ -o $outname $tmpfile $cfiles $NSC_LDFLAGS -L$NSC_EXEC_PREFIX/lib -lnetsnmpagent -lnetsnmphelpers -lnetsnmpmibs -lnetsnmp $NSC_AGENTLIBS $ldflags" -+ cmd="@CC@ $cflags @CFLAGS@ @DEVFLAGS@ -I. -I@includedir@ -o $outname $tmpfile $cfiles $NSC_LDFLAGS -L$NSC_EXEC_PREFIX/lib -lnetsnmpagent -lnetsnmphelpers -lnetsnmpmibs -lnetsnmp $NSC_AGENTLIBS @WRAPLIBS@ $ldflags" - echo "running: $cmd" - `$cmd` - if test "x$norm" != "x1" ; then -diff -ruN net-snmp-5.1.2-orig/perl/agent/netsnmp_request_infoPtr.pm net-snmp-5.1.2-5/perl/agent/netsnmp_request_infoPtr.pm ---- net-snmp-5.1.2-orig/perl/agent/netsnmp_request_infoPtr.pm 2002-09-19 22:38:24.000000000 +0200 -+++ net-snmp-5.1.2-5/perl/agent/netsnmp_request_infoPtr.pm 2005-03-13 16:17:21.000000000 +0100 -@@ -4,6 +4,7 @@ - - 1; - __END__ -+ - =head1 NAME - - NetSNMP::agent::netsnmp_request_infoPtr - Perl extension for request information -diff -ruN net-snmp-5.1.2-orig/snmplib/Makefile.in net-snmp-5.1.2-5/snmplib/Makefile.in ---- net-snmp-5.1.2-orig/snmplib/Makefile.in 2004-03-04 14:41:19.000000000 +0100 -+++ net-snmp-5.1.2-5/snmplib/Makefile.in 2005-03-13 16:17:21.000000000 +0100 -@@ -178,11 +178,11 @@ - - # how to build the libraries. - libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION): ${TOBJS} -- $(LIB_LD_CMD) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} -+ $(LIB_LD_CMD) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} @CRYPTOLIBS@ - $(RANLIB) libnetsnmp.$(LIB_EXTENSION)$(LIB_VERSION) - - libsnmp.$(LIB_EXTENSION)$(LIB_VERSION): ${TOBJS} -- $(LIB_LD_CMD) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} -+ $(LIB_LD_CMD) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) ${TOBJS} @CRYPTOLIBS@ - $(RANLIB) libsnmp.$(LIB_EXTENSION)$(LIB_VERSION) - - # -diff -ruN net-snmp-5.1.2-orig/snmplib/snmpUDPDomain.c net-snmp-5.1.2-5/snmplib/snmpUDPDomain.c ---- net-snmp-5.1.2-orig/snmplib/snmpUDPDomain.c 2004-07-07 14:21:32.000000000 +0200 -+++ net-snmp-5.1.2-5/snmplib/snmpUDPDomain.c 2005-03-13 16:17:21.000000000 +0100 -@@ -233,18 +233,6 @@ - netsnmp_transport_free(t); - return NULL; - } --#ifdef SO_BSDCOMPAT -- /* -- * Patch for Linux. Without this, UDP packets that fail get an ICMP -- * response. Linux turns the failed ICMP response into an error message -- * and return value, unlike all other OS's. -- */ -- { -- int one = 1; -- setsockopt(t->sock, SOL_SOCKET, SO_BSDCOMPAT, (void *) &one, -- sizeof(one)); -- } --#endif /*SO_BSDCOMPAT */ - /* - * SO_REUSEADDR will allow multiple apps to open the same port at - * the same time. Only the last one to open the socket will get -diff -ruN net-snmp-5.1.2-orig/snmplib/snmpUDPIPv6Domain.c net-snmp-5.1.2-5/snmplib/snmpUDPIPv6Domain.c ---- net-snmp-5.1.2-orig/snmplib/snmpUDPIPv6Domain.c 2004-07-22 19:45:00.000000000 +0200 -+++ net-snmp-5.1.2-5/snmplib/snmpUDPIPv6Domain.c 2005-03-13 16:17:21.000000000 +0100 -@@ -249,17 +249,6 @@ - netsnmp_transport_free(t); - return NULL; - } --#ifdef SO_BSDCOMPAT -- /* -- * Patch for Linux. Without this, UDP packets that fail get an ICMP -- * response. Linux turns the failed ICMP response into an error message -- * and return value, unlike all other OS's. -- */ -- { -- int one = 1; -- setsockopt(t->sock, SOL_SOCKET, SO_BSDCOMPAT, &one, sizeof(one)); -- } --#endif /*SO_BSDCOMPAT */ - - /* - * Try to set the send and receive buffers to a reasonably large value, so -diff -ruN net-snmp-5.1.2-orig/snmplib/snmp_logging.c net-snmp-5.1.2-5/snmplib/snmp_logging.c ---- net-snmp-5.1.2-orig/snmplib/snmp_logging.c 2004-03-31 03:06:08.000000000 +0200 -+++ net-snmp-5.1.2-5/snmplib/snmp_logging.c 2005-03-13 16:17:21.000000000 +0100 -@@ -860,13 +860,14 @@ - } else { - strcpy(sbuf, ""); - } -- newline = string[strlen(string) - 1] == '\n'; /* XXX - Eh ? */ - - if (logh->imagic) - printf( "%s%s", sbuf, string); - else - fprintf(stderr, "%s%s", sbuf, string); - -+ newline = string[strlen(string) - 1] == '\n'; /* XXX - Eh ? */ -+ - return 1; - } - -diff -ruN net-snmp-5.1.2-orig/snmplib/winservice.mc net-snmp-5.1.2-5/snmplib/winservice.mc ---- net-snmp-5.1.2-orig/snmplib/winservice.mc 2002-04-20 09:30:21.000000000 +0200 -+++ net-snmp-5.1.2-5/snmplib/winservice.mc 2005-03-13 16:17:21.000000000 +0100 -@@ -1,11 +1,11 @@ --;//Message catalog for Windows Serivce Support routines --;//To support event logging functionality --;//By Raju Krishnappa(raju_krishnappa@yahoo.com) -- --;//Message ID descriptions -- --MessageId=100 --SymbolicName=DISPLAY_MSG --Language=English --%1. --. -+;//Message catalog for Windows Serivce Support routines -+;//To support event logging functionality -+;//By Raju Krishnappa(raju_krishnappa@yahoo.com) -+ -+;//Message ID descriptions -+ -+MessageId=100 -+SymbolicName=DISPLAY_MSG -+Language=English -+%1. -+. -diff -ruN net-snmp-5.1.2-orig/snmplib/winservice.rc net-snmp-5.1.2-5/snmplib/winservice.rc ---- net-snmp-5.1.2-orig/snmplib/winservice.rc 2002-04-20 09:30:21.000000000 +0200 -+++ net-snmp-5.1.2-5/snmplib/winservice.rc 2005-03-13 16:17:21.000000000 +0100 -@@ -1,2 +1,2 @@ --LANGUAGE 0x9,0x1 --1 11 MSG00001.bin -+LANGUAGE 0x9,0x1 -+1 11 MSG00001.bin |