diff options
Diffstat (limited to 'openwrt/package/busybox/config/miscutils/Config.in')
| -rw-r--r-- | openwrt/package/busybox/config/miscutils/Config.in | 312 |
1 files changed, 0 insertions, 312 deletions
diff --git a/openwrt/package/busybox/config/miscutils/Config.in b/openwrt/package/busybox/config/miscutils/Config.in deleted file mode 100644 index 404170188e..0000000000 --- a/openwrt/package/busybox/config/miscutils/Config.in +++ /dev/null @@ -1,312 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Miscellaneous Utilities" - -config BUSYBOX_CONFIG_ADJTIMEX - bool "adjtimex" - default n - help - Adjtimex reads and optionally sets adjustment parameters for - the Linux clock adjustment algorithm. - -config BUSYBOX_CONFIG_BBCONFIG - bool "bbconfig" - default n - help - The bbconfig applet will print the config file with which - busybox was built. - -config BUSYBOX_CONFIG_CROND - bool "crond" - default y - select BUSYBOX_CONFIG_FEATURE_SUID - help - Crond is a background daemon that parses individual crontab - files and executes commands on behalf of the users in question. - This is a port of dcron from slackware. It uses files of the - format /var/spool/cron/crontabs/<username> files, for example: - $ cat /var/spool/cron/crontabs/root - # Run daily cron jobs at 4:40 every day: - 40 4 * * * /etc/cron/daily > /dev/null 2>&1 - Note that Busybox binary must be setuid root for this applet to - work properly. - -config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL - bool " Using /usr/sbin/sendmail?" - default n - depends on BUSYBOX_CONFIG_CROND - help - Support calling /usr/sbin/sendmail for send cmd outputs. - -config BUSYBOX_CONFIG_CRONTAB - bool "crontab" - default y - select BUSYBOX_CONFIG_FEATURE_SUID - help - Crontab manipulates the crontab for a particular user. Only - the superuser may specify a different user and/or crontab directory. - -config BUSYBOX_CONFIG_DC - bool "dc" - default n - help - Dc is a reverse-polish desk calculator which supports unlimited - precision arithmetic. - -config BUSYBOX_CONFIG_DEVFSD - bool "devfsd" - default n - help - Provides compatibility with old device names on a devfs systems. - You should set it to true if you have devfs enabled. - The following keywords in devsfd.conf are supported: - "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", - "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", - "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". - - But only if they are written UPPERCASE!!!!!!!! - -config BUSYBOX_CONFIG_DEVFSD_MODLOAD - bool "Adds support for MODLOAD keyword in devsfd.conf" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - This actually doesn't work with busybox modutils but needs the real modutils. - -config BUSYBOX_CONFIG_DEVFSD_FG_NP - bool "Enables the -fg and -np options" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - -fg Run the daemon in the foreground. - -np Exit after parsing the configuration file. Do not poll for events. - -config BUSYBOX_CONFIG_DEVFSD_VERBOSE - bool "Increases logging (and size)" - default n - depends on BUSYBOX_CONFIG_DEVFSD - help - Increases logging to stderr or syslog. - -config BUSYBOX_CONFIG_EJECT - bool "eject" - default n - help - Used to eject cdroms. (defaults to /dev/cdrom) - -config BUSYBOX_CONFIG_LAST - bool "last" - default n - select BUSYBOX_CONFIG_FEATURE_WTMP - help - 'last' displays a list of the last users that logged into the system. - -config BUSYBOX_CONFIG_LESS - bool "less" - default n - help - 'less' is a pager, meaning that it displays text files. It possesses - a wide array of features, and is an improvement over 'more'. - -config BUSYBOX_CONFIG_FEATURE_LESS_BRACKETS - bool " Enable bracket searching" - default n - depends on BUSYBOX_CONFIG_LESS - help - This option adds the capability to search for matching left and right - brackets, facilitating programming. - -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS - bool " Enable extra flags" - default n - depends on BUSYBOX_CONFIG_LESS - help - The extra flags provided do the following: - - The -M flag enables a more sophisticated status line. - The -m flag enables a simpler status line with a percentage. - -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS - bool " Enable flag changes" - default n - depends on BUSYBOX_CONFIG_LESS - help - This enables the ability to change command-line flags within - less itself. - -config BUSYBOX_CONFIG_FEATURE_LESS_MARKS - bool " Enable marks" - default n - depends on BUSYBOX_CONFIG_LESS - help - Marks enable positions in a file to be stored for easy reference. - -config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP - bool " Enable regular expressions" - default n - depends on BUSYBOX_CONFIG_LESS - help - Enable regular expressions, allowing complex file searches. - -config BUSYBOX_CONFIG_HDPARM - bool "hdparm" - default n - help - Get/Set hard drive parameters. Primarily intended for ATA - drives. Adds about 13k (or around 30k if you enable the - BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY option).... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY - bool " Support obtaining detailed information directly from drives" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the -I and -Istdin options to obtain detailed information - directly from drives about their capabilities and supported ATA - feature set. Enabling this option will add about 16k... - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF - bool " Register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -R' option to register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF - bool " Un-register an IDE interface (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -U' option to un-register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET - bool " perform device reset (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -w' option to perform a device reset. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - bool " tristate device for hotswap (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -x' option to tristate device for hotswap, - and the '-b' option to get/set bus state. This is dangerous - stuff, so you should probably say N. - -config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA - bool " get/set using_dma flag (DANGEROUS)" - default n - depends on BUSYBOX_CONFIG_HDPARM - help - Enables the 'hdparm -d' option to get/set using_dma flag. - This is dangerous stuff, so you should probably say N. - -config BUSYBOX_CONFIG_LOCK - bool "lock" - default y - help - Small utility for using locks in scripts - -config BUSYBOX_CONFIG_MAKEDEVS - bool "makedevs" - default n - help - 'makedevs' is a utility used to create a batch of devices with - one command. - . - There are two choices for command line behaviour, the interface - as used by LEAF/Linux Router Project, or a device table file. - . - 'leaf' is traditionally what busybox follows, it allows multiple - devices of a particluar type to be created per command. - e.g. /dev/hda[0-9] - Device properties are passed as command line arguments. - . - 'table' reads device properties from a file or stdin, allowing - a batch of unrelated devices to be makde with one command. - User/group names are allowed as an alternative to uid/gid. - -choice - prompt "Choose makedevs behaviour" - depends BUSYBOX_CONFIG_MAKEDEVS - default BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_LEAF - bool "leaf" - -config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE - bool "table" - -endchoice - -config BUSYBOX_CONFIG_MOUNTPOINT - bool "mountpoint" - default n - help - mountpoint checks if the directory is a mountpoint. - -config BUSYBOX_CONFIG_MT - bool "mt" - default n - help - mt is used to control tape devices. You can use the mt utility - to advance or rewind a tape past a specified number of archive - files on the tape. - -config BUSYBOX_CONFIG_RUNLEVEL - bool "runlevel" - default n - help - find the current and previous system runlevel. - - This applet uses utmp but does not rely on busybox supporing - utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. - -config BUSYBOX_CONFIG_RX - bool "rx" - default n - help - Receive files using the Xmodem protocol. - -config BUSYBOX_CONFIG_STRINGS - bool "strings" - default y - help - strings prints the printable character sequences for each file - specified. - -config BUSYBOX_CONFIG_SETSID - bool "setsid" - default n - help - setsid runs a program in a new session - -config BUSYBOX_CONFIG_TIME - bool "time" - default y - help - The time command runs the specified program with the given arguments. - When the command finishes, time writes a message to standard output - giving timing statistics about this program run. - -config BUSYBOX_CONFIG_WATCHDOG - bool "watchdog" - default y - help - The watchdog utility is used with hardware or software watchdog - device drivers. It opens the specified watchdog device special file - and periodically writes a magic character to the device. If the - watchdog applet ever fails to write the magic character within a - certain amount of time, the watchdog device assumes the system has - hung, and will cause the hardware to reboot. - -endmenu - |