diff options
| -rw-r--r-- | package/firmware/ipq-wifi/Makefile | 2 | ||||
| -rw-r--r-- | package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 | bin | 0 -> 24324 bytes | |||
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/board.d/02_network | 6 | ||||
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 10 | ||||
| -rw-r--r-- | target/linux/ipq40xx/base-files/lib/upgrade/platform.sh | 4 | ||||
| -rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts | 272 | ||||
| -rw-r--r-- | target/linux/ipq40xx/image/mikrotik.mk | 20 | ||||
| -rw-r--r-- | target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch | 3 |
8 files changed, 316 insertions, 1 deletions
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index e5f10a1f98..770360443a 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -43,6 +43,7 @@ ALLWIFIBOARDS:= \ linksys_ea8300 \ linksys_mr8300-v0 \ luma_wrtq-329acn \ + mikrotik_hap-ac2 \ mobipromo_cm520-79f \ nec_wg2600hp3 \ plasmacloud_pa1200 \ @@ -126,6 +127,7 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300)) $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN)) +$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2)) $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F)) $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3)) $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200)) diff --git a/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 Binary files differnew file mode 100644 index 0000000000..73372c183e --- /dev/null +++ b/package/firmware/ipq-wifi/board-mikrotik_hap-ac2.qca4019 diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 31f99faca2..3f0209d82d 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -47,6 +47,7 @@ ipq40xx_setup_interfaces() ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; asus,rt-ac58u|\ + mikrotik,hap-ac2|\ zyxel,nbg6617) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ @@ -169,6 +170,11 @@ ipq40xx_setup_macs() wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) lan_mac=$(macaddr_add "$wan_mac" 1) ;; + mikrotik,hap-ac2) + wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base) + lan_mac=$(macaddr_add $wan_mac 1) + label_mac="$wan_mac" + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c4d9dd78e3..0e027dd0a5 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -140,6 +140,11 @@ case "$FIRMWARE" in caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) ;; + mikrotik,hap-ac2) + wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" + ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \ + ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 ) + ;; netgear,ex6100v2 |\ netgear,ex6150v2) caldata_extract "ART" 0x1000 0x2f20 @@ -244,6 +249,11 @@ case "$FIRMWARE" in caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) ;; + mikrotik,hap-ac2) + wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" + ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \ + ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 ) + ;; netgear,ex6100v2 |\ netgear,ex6150v2) caldata_extract "ART" 0x5000 0x2f20 diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 5582696759..c94b4d8f9e 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -111,6 +111,10 @@ platform_do_upgrade() { CI_KERNPART="part.safe" nand_do_upgrade "$1" ;; + mikrotik,hap-ac2) + [ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware + default_do_upgrade "$1" + ;; openmesh,a42 |\ openmesh,a62 |\ plasmacloud,pa1200 |\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts new file mode 100644 index 0000000000..e1e6326ae9 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/soc/qcom,tcsr.h> + +/ { + model = "MikroTik hAP ac2"; + compatible = "mikrotik,hap-ac2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-running = &led_user; + led-upgrade = &led_user; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = <TCSR_ESS_PSGMII>; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + mode { + label = "mode"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "green:power"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + panic-indicator; + }; + + led_user: user { + label = "green:user"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + enable-usb-power { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "enable USB power"; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Qualcomm"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + compatible = "mikrotik,routerboot-partitions"; + #address-cells = <1>; + #size-cells = <1>; + label = "RouterBoot"; + reg = <0x80000 0x80000>; + read-only; + + hard_config { + read-only; + }; + + dtb_config { + read-only; + }; + + soft_config { + }; + }; + + partition@100000 { + compatible = "mikrotik,minor"; + label = "firmware"; + reg = <0x100000 0xf00000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +ðphy0 { + qcom,single-led-1000; + qcom,single-led-100; + qcom,single-led-10; +}; + +ðphy1 { + qcom,single-led-1000; + qcom,single-led-100; + qcom,single-led-10; +}; + +ðphy2 { + qcom,single-led-1000; + qcom,single-led-100; + qcom,single-led-10; +}; + +ðphy3 { + qcom,single-led-1000; + qcom,single-led-100; + qcom,single-led-10; +}; + +ðphy4 { + qcom,single-led-1000; + qcom,single-led-100; + qcom,single-led-10; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "MikroTik-hAP-ac2"; +}; diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk index e69de29bb2..9509ef8577 100644 --- a/target/linux/ipq40xx/image/mikrotik.mk +++ b/target/linux/ipq40xx/image/mikrotik.mk @@ -0,0 +1,20 @@ +define Device/mikrotik_nor + DEVICE_VENDOR := MikroTik + BLOCKSIZE := 64k + IMAGE_SIZE := 16128k + KERNEL_NAME := vmlinux + KERNEL := kernel-bin | append-dtb-elf + IMAGES = sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 | \ + pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | \ + append-metadata | check-size +endef + +define Device/mikrotik_hap-ac2 + $(call Device/mikrotik_nor) + DEVICE_MODEL := hAP ac2 + SOC := qcom-ipq4018 + DEVICE_PACKAGES := ipq-wifi-mikrotik_hap-ac2 -kmod-ath10k-ct \ + kmod-ath10k-ct-smallbuffers +endef +TARGET_DEVICES += mikrotik_hap-ac2 diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch index a3d3341587..6a421b9007 100644 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -837,11 +837,58 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -31,6 +31,7 @@ Signed-off-by: John Crispin <john@phrozen.org> + qcom-ipq4018-gl-ap1300.dtb \ + qcom-ipq4018-jalapeno.dtb \ + qcom-ipq4018-meshpoint-one.dtb \ ++ qcom-ipq4018-hap-ac2.dtb \ + qcom-ipq4018-nbg6617.dtb \ + qcom-ipq4019-oap100.dtb \ + qcom-ipq4018-pa1200.dtb \ |