aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--tools/firmware-utils/Makefile1
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c538
2 files changed, 539 insertions, 0 deletions
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index 65b7c1530e..988c6256af 100644
--- a/tools/firmware-utils/Makefile
+++ b/tools/firmware-utils/Makefile
@@ -41,6 +41,7 @@ define Host/Compile
$(call cc,mkplanexfw sha1)
$(call cc,mktplinkfw md5)
$(call cc,mktplinkfw2 md5)
+ $(call cc,tplink-safeloader md5, -Wall)
$(call cc,pc1crypt)
$(call cc,osbridge-crc)
$(call cc,wrt400n cyg_crc32)
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
new file mode 100644
index 0000000000..23d703ffe8
--- /dev/null
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -0,0 +1,538 @@
+/*
+ Copyright (c) 2014, Matthias Schiffer <mschiffer@universe-factory.net>
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+
+/*
+ tplink-safeloader
+
+ Image generation tool for the TP-LINK SafeLoader as seen on
+ TP-LINK Pharos devices (CPE210/220/510/520)
+*/
+
+
+#include <assert.h>
+#include <errno.h>
+#include <error.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <arpa/inet.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include "md5.h"
+
+
+#define ALIGN(x,a) ({ typeof(a) __a = (a); (((x) + __a - 1) & ~(__a - 1)); })
+
+
+/** An image partition table entry */
+struct image_partition_entry {
+ const char *name;
+ size_t size;
+ uint8_t *data;
+};
+
+/** A flash partition table entry */
+struct flash_partition_entry {
+ const char *name;
+ uint32_t base;
+ uint32_t size;
+};
+
+
+/** The content of the soft-version structure */
+struct __attribute__((__packed__)) soft_version {
+ uint32_t magic;
+ uint32_t zero;
+ uint8_t pad1;
+ uint8_t version_major;
+ uint8_t version_minor;
+ uint8_t version_patch;
+ uint8_t year_hi;
+ uint8_t year_lo;
+ uint8_t month;
+ uint8_t day;
+ uint32_t rev;
+ uint8_t pad2;
+};
+
+
+static const uint8_t jffs2_eof_mark[4] = {0xde, 0xad, 0xc0, 0xde};
+
+
+/**
+ Salt for the MD5 hash
+
+ Fortunately, TP-LINK seems to use the same salt for most devices which use
+ the new image format.
+*/
+static const uint8_t md5_salt[16] = {
+ 0x7a, 0x2b, 0x15, 0xed,
+ 0x9b, 0x98, 0x59, 0x6d,
+ 0xe5, 0x04, 0xab, 0x44,
+ 0xac, 0x2a, 0x9f, 0x4e,
+};
+
+
+/** Vendor information for CPE210/220/510/520 */
+static const unsigned char cpe510_vendor[] = "\x00\x00\x00\x1f""CPE510(TP-LINK|UN|N300-5):1.0\r\n";
+
+
+/**
+ The flash partition table for CPE210/220/510/520;
+ it is the same as the one used by the stock images.
+*/
+static const struct flash_partition_entry cpe510_partitions[] = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"partition-table", 0x20000, 0x02000},
+ {"default-mac", 0x30000, 0x00020},
+ {"product-info", 0x31100, 0x00100},
+ {"signature", 0x32000, 0x00400},
+ {"os-image", 0x40000, 0x170000},
+ {"soft-version", 0x1b0000, 0x00100},
+ {"support-list", 0x1b1000, 0x00400},
+ {"file-system", 0x1c0000, 0x600000},
+ {"user-config", 0x7c0000, 0x10000},
+ {"default-config", 0x7d0000, 0x10000},
+ {"log", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+};
+
+/**
+ The support list for CPE210/220/510/520
+
+ The stock images also contain strings for two more devices: BS510 and BS210.
+ At the moment, there exists no public information about these devices.
+*/
+static const unsigned char cpe510_support_list[] =
+ "\x00\x00\x00\xc8\x00\x00\x00\x00"
+ "SupportList:\r\n"
+ "CPE510(TP-LINK|UN|N300-5):1.0\r\n"
+ "CPE520(TP-LINK|UN|N300-5):1.0\r\n"
+ "CPE210(TP-LINK|UN|N300-2):1.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2):1.0\r\n"
+ "\r\n\xff";
+
+
+/** Allocates a new image partition */
+struct image_partition_entry alloc_image_partition(const char *name, size_t len) {
+ struct image_partition_entry entry = {name, len, malloc(len)};
+ if (!entry.data)
+ error(1, errno, "malloc");
+
+ return entry;
+}
+
+/** Frees an image partition */
+void free_image_partition(struct image_partition_entry entry) {
+ free(entry.data);
+}
+
+/** Generates the partition-table partition */
+struct image_partition_entry make_partition_table(const struct flash_partition_entry *p) {
+ struct image_partition_entry entry = alloc_image_partition("partition-table", 0x800);
+
+ char *s = (char *)entry.data, *end = (char *)(s+entry.size);
+
+ *(s++) = 0x00;
+ *(s++) = 0x04;
+ *(s++) = 0x00;
+ *(s++) = 0x00;
+
+ size_t i;
+ for (i = 0; p[i].name; i++) {
+ size_t len = end-s;
+ size_t w = snprintf(s, len, "partition %s base 0x%05x size 0x%05x\n", p[i].name, p[i].base, p[i].size);
+
+ if (w > len-1)
+ error(1, 0, "flash partition table overflow?");
+
+ s += w;
+ }
+
+ s++;
+
+ memset(s, 0xff, end-s);
+
+ return entry;
+}
+
+
+/** Generates a binary-coded decimal representation of an integer in the range [0, 99] */
+static inline uint8_t bcd(uint8_t v) {
+ return 0x10 * (v/10) + v%10;
+}
+
+
+/** Generates the soft-version partition */
+struct image_partition_entry make_soft_version(uint32_t rev) {
+ struct image_partition_entry entry = alloc_image_partition("soft-version", sizeof(struct soft_version));
+ struct soft_version *s = (struct soft_version *)entry.data;
+
+ time_t t;
+ if (time(&t) == (time_t)(-1))
+ error(1, errno, "time");
+
+ struct tm *tm = localtime(&t);
+
+ s->magic = htonl(0x0000000c);
+ s->zero = 0;
+ s->pad1 = 0xff;
+
+ s->version_major = 0;
+ s->version_minor = 0;
+ s->version_patch = 0;
+
+ s->year_hi = bcd((1900+tm->tm_year)/100);
+ s->year_lo = bcd(tm->tm_year%100);
+ s->month = bcd(tm->tm_mon+1);
+ s->day = bcd(tm->tm_mday);
+ s->rev = htonl(rev);
+
+ s->pad2 = 0xff;
+
+ return entry;
+}
+
+/** Generates the support-list partition */
+struct image_partition_entry make_support_list(const unsigned char *support_list, size_t len) {
+ struct image_partition_entry entry = alloc_image_partition("support-list", len);
+ memcpy(entry.data, support_list, len);
+ return entry;
+}
+
+/** Creates a new image partition with an arbitrary name from a file */
+struct image_partition_entry read_file(const char *part_name, const char *filename, bool add_jffs2_eof) {
+ struct stat statbuf;
+
+ if (stat(filename, &statbuf) < 0)
+ error(1, errno, "unable to stat file `%s'", filename);
+
+ size_t len = statbuf.st_size;
+
+ if (add_jffs2_eof)
+ len = ALIGN(len, 0x10000) + sizeof(jffs2_eof_mark);
+
+ struct image_partition_entry entry = alloc_image_partition(part_name, len);
+
+ FILE *file = fopen(filename, "rb");
+ if (!file)
+ error(1, errno, "unable to open file `%s'", filename);
+
+ if (fread(entry.data, statbuf.st_size, 1, file) != 1)
+ error(1, errno, "unable to read file `%s'", filename);
+
+ if (add_jffs2_eof) {
+ uint8_t *eof = entry.data + statbuf.st_size, *end = entry.data+entry.size;
+
+ memset(eof, 0xff, end - eof - sizeof(jffs2_eof_mark));
+ memcpy(end - sizeof(jffs2_eof_mark), jffs2_eof_mark, sizeof(jffs2_eof_mark));
+ }
+
+ fclose(file);
+
+ return entry;
+}
+
+
+/**
+ Copies a list of image partitions into an image buffer and generates the image partition table while doing so
+
+ Example image partition table:
+
+ fwup-ptn partition-table base 0x00800 size 0x00800
+ fwup-ptn os-image base 0x01000 size 0x113b45
+ fwup-ptn file-system base 0x114b45 size 0x1d0004
+ fwup-ptn support-list base 0x2e4b49 size 0x000d1
+
+ Each line of the partition table is terminated with the bytes 09 0d 0a ("\t\r\n"),
+ the end of the partition table is marked with a zero byte.
+
+ The firmware image must contain at least the partition-table and support-list partitions
+ to be accepted. There aren't any alignment constraints for the image partitions.
+
+ The partition-table partition contains the actual flash layout; partitions
+ from the image partition table are mapped to the corresponding flash partitions during
+ the firmware upgrade. The support-list partition contains a list of devices supported by
+ the firmware image.
+
+ The base offsets in the firmware partition table are relative to the end
+ of the vendor information block, so the partition-table partition will
+ actually start at offset 0x1814 of the image.
+
+ I think partition-table must be the first partition in the firmware image.
+*/
+void put_partitions(uint8_t *buffer, const struct image_partition_entry *parts) {
+ size_t i;
+ char *image_pt = (char *)buffer, *end = image_pt + 0x800;
+
+ size_t base = 0x800;
+ for (i = 0; parts[i].name; i++) {
+ memcpy(buffer + base, parts[i].data, parts[i].size);
+
+ size_t len = end-image_pt;
+ size_t w = snprintf(image_pt, len, "fwup-ptn %s base 0x%05x size 0x%05x\t\r\n", parts[i].name, (unsigned)base, (unsigned)parts[i].size);
+
+ if (w > len-1)
+ error(1, 0, "image partition table overflow?");
+
+ image_pt += w;
+
+ base += parts[i].size;
+ }
+
+ image_pt++;
+
+ memset(image_pt, 0xff, end-image_pt);
+}
+
+/** Generates and writes the image MD5 checksum */
+void put_md5(uint8_t *md5, uint8_t *buffer, unsigned int len) {
+ MD5_CTX ctx;
+
+ MD5_Init(&ctx);
+ MD5_Update(&ctx, md5_salt, (unsigned int)sizeof(md5_salt));
+ MD5_Update(&ctx, buffer, len);
+ MD5_Final(md5, &ctx);
+}
+
+
+/**
+ Generates the firmware image in factory format
+
+ Image format:
+
+ Bytes (hex) Usage
+ ----------- -----
+ 0000-0003 Image size (4 bytes, big endian)
+ 0004-0013 MD5 hash (hash of a 16 byte salt and the image data starting with byte 0x14)
+ 0014-1013 Vendor information (4096 bytes, padded with 0xff; there seem to be older
+ (VxWorks-based) TP-LINK devices which use a smaller vendor information block)
+ 1014-1813 Image partition table (2048 bytes, padded with 0xff)
+ 1814-xxxx Firmware partitions
+*/
+void * generate_factory_image(const unsigned char *vendor, size_t vendor_len, const struct image_partition_entry *parts, size_t *len) {
+ *len = 0x1814;
+
+ size_t i;
+ for (i = 0; parts[i].name; i++)
+ *len += parts[i].size;
+
+ uint8_t *image = malloc(*len);
+ if (!image)
+ error(1, errno, "malloc");
+
+ image[0] = *len >> 24;
+ image[1] = *len >> 16;
+ image[2] = *len >> 8;
+ image[3] = *len;
+
+ memcpy(image+0x14, vendor, vendor_len);
+ memset(image+0x14+vendor_len, 0xff, 4096-vendor_len);
+
+ put_partitions(image + 0x1014, parts);
+ put_md5(image+0x04, image+0x14, *len-0x14);
+
+ return image;
+}
+
+/**
+ Generates the firmware image in sysupgrade format
+
+ This makes some assumptions about the provided flash and image partition tables and
+ should be generalized when TP-LINK starts building its safeloader into hardware with
+ different flash layouts.
+*/
+void * generate_sysupgrade_image(const struct flash_partition_entry *flash_parts, const struct image_partition_entry *image_parts, size_t *len) {
+ const struct flash_partition_entry *flash_os_image = &flash_parts[5];
+ const struct flash_partition_entry *flash_soft_version = &flash_parts[6];
+ const struct flash_partition_entry *flash_support_list = &flash_parts[7];
+ const struct flash_partition_entry *flash_file_system = &flash_parts[8];
+
+ const struct image_partition_entry *image_os_image = &image_parts[3];
+ const struct image_partition_entry *image_soft_version = &image_parts[1];
+ const struct image_partition_entry *image_support_list = &image_parts[2];
+ const struct image_partition_entry *image_file_system = &image_parts[4];
+
+ assert(strcmp(flash_os_image->name, "os-image") == 0);
+ assert(strcmp(flash_soft_version->name, "soft-version") == 0);
+ assert(strcmp(flash_support_list->name, "support-list") == 0);
+ assert(strcmp(flash_file_system->name, "file-system") == 0);
+
+ assert(strcmp(image_os_image->name, "os-image") == 0);
+ assert(strcmp(image_soft_version->name, "soft-version") == 0);
+ assert(strcmp(image_support_list->name, "support-list") == 0);
+ assert(strcmp(image_file_system->name, "file-system") == 0);
+
+ if (image_os_image->size > flash_os_image->size)
+ error(1, 0, "kernel image too big (more than %u bytes)", (unsigned)flash_os_image->size);
+ if (image_file_system->size > flash_file_system->size)
+ error(1, 0, "rootfs image too big (more than %u bytes)", (unsigned)flash_file_system->size);
+
+ *len = flash_file_system->base - flash_os_image->base + image_file_system->size;
+
+ uint8_t *image = malloc(*len);
+ if (!image)
+ error(1, errno, "malloc");
+
+ memset(image, 0xff, *len);
+
+ memcpy(image, image_os_image->data, image_os_image->size);
+ memcpy(image + flash_soft_version->base - flash_os_image->base, image_soft_version->data, image_soft_version->size);
+ memcpy(image + flash_support_list->base - flash_os_image->base, image_support_list->data, image_support_list->size);
+ memcpy(image + flash_file_system->base - flash_os_image->base, image_file_system->data, image_file_system->size);
+
+ return image;
+}
+
+
+/** Generates an image for CPE210/220/510/520 and writes it to a file */
+static void do_cpe510(const char *output, const char *kernel_image, const char *rootfs_image, uint32_t rev, bool add_jffs2_eof, bool sysupgrade) {
+ struct image_partition_entry parts[6] = {};
+
+ parts[0] = make_partition_table(cpe510_partitions);
+ parts[1] = make_soft_version(rev);
+ parts[2] = make_support_list(cpe510_support_list, sizeof(cpe510_support_list)-1);
+ parts[3] = read_file("os-image", kernel_image, false);
+ parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
+
+ size_t len;
+ void *image;
+ if (sysupgrade)
+ image = generate_sysupgrade_image(cpe510_partitions, parts, &len);
+ else
+ image = generate_factory_image(cpe510_vendor, sizeof(cpe510_vendor)-1, parts, &len);
+
+ FILE *file = fopen(output, "wb");
+ if (!file)
+ error(1, errno, "unable to open output file");
+
+ if (fwrite(image, len, 1, file) != 1)
+ error(1, 0, "unable to write output file");
+
+ fclose(file);
+
+ free(image);
+
+ size_t i;
+ for (i = 0; parts[i].name; i++)
+ free_image_partition(parts[i]);
+}
+
+
+/** Usage output */
+void usage(const char *argv0) {
+ fprintf(stderr,
+ "Usage: %s [OPTIONS...]\n"
+ "\n"
+ "Options:\n"
+ " -B <board> create image for the board specified with <board>\n"
+ " -k <file> read kernel image from the file <file>\n"
+ " -r <file> read rootfs image from the file <file>\n"
+ " -o <file> write output to the file <file>\n"
+ " -V <rev> sets the revision number to <rev>\n"
+ " -j add jffs2 end-of-filesystem markers\n"
+ " -S create sysupgrade instead of factory image\n"
+ " -h show this help\n",
+ argv0
+ );
+};
+
+
+int main(int argc, char *argv[]) {
+ const char *board = NULL, *kernel_image = NULL, *rootfs_image = NULL, *output = NULL;
+ bool add_jffs2_eof = false, sysupgrade = false;
+ unsigned rev = 0;
+
+ while (true) {
+ int c;
+
+ c = getopt(argc, argv, "B:k:r:o:V:jSh");
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'B':
+ board = optarg;
+ break;
+
+ case 'k':
+ kernel_image = optarg;
+ break;
+
+ case 'r':
+ rootfs_image = optarg;
+ break;
+
+ case 'o':
+ output = optarg;
+ break;
+
+ case 'V':
+ sscanf(optarg, "r%u", &rev);
+ break;
+
+ case 'j':
+ add_jffs2_eof = true;
+ break;
+
+ case 'S':
+ sysupgrade = true;
+ break;
+
+ case 'h':
+ usage(argv[0]);
+ return 0;
+
+ default:
+ usage(argv[0]);
+ return 1;
+ }
+ }
+
+ if (!board)
+ error(1, 0, "no board has been specified");
+ if (!kernel_image)
+ error(1, 0, "no kernel image has been specified");
+ if (!rootfs_image)
+ error(1, 0, "no rootfs image has been specified");
+ if (!output)
+ error(1, 0, "no output filename has been specified");
+
+ if (strcmp(board, "CPE510") == 0)
+ do_cpe510(output, kernel_image, rootfs_image, rev, add_jffs2_eof, sysupgrade);
+ else
+ error(1, 0, "unsupported board %s", board);
+
+ return 0;
+}