aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata8
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/01_leds6
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/02_network6
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-3.181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c189
-rw-r--r--target/linux/ar71xx/generic/profiles/devolo-dlan.mk14
-rw-r--r--target/linux/ar71xx/image/Makefile2
-rw-r--r--target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch27
11 files changed, 254 insertions, 6 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0767d8b40b..ce840cc5de 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -73,6 +73,9 @@ get_status_led() {
dlan-pro-500-wp)
status_led="devolo:green:wlan-2g"
;;
+ dlan-pro-1200-ac)
+ status_led="devolo:status:wlan"
+ ;;
dragino2)
status_led="dragino2:red:system"
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 164d3abd39..c827e31442 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -34,6 +34,14 @@ case "$FIRMWARE" in
esac
;;
+"ath10k/cal-pci-0000:00:00.0.bin")
+ case $board in
+ dlan-pro-1200-ac)
+ ath10kcal_from_file $(find_mtd_part "art") 20480 $ath10kcal_tmp
+ ;;
+ esac
+ ;;
+
*)
exit 1
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index f740d3b407..e1e711c953 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -157,6 +157,12 @@ dlan-pro-500-wp)
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
;;
+dlan-pro-1200-ac)
+ ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio"
+ ucidef_set_led_trigger_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
+ ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
+ ;;
+
gl-inet)
ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 7212c5e63c..963deb8e29 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -302,6 +302,12 @@ dlan-pro-500-wp)
ucidef_set_interface_lan "eth0 eth1"
;;
+dlan-pro-1200-ac)
+ ucidef_set_interface_lan "eth0"
+ ucidef_add_switch "switch0" "1" "0"
+ ucidef_add_switch_vlan "switch0" "0" "0 2 3 4"
+ ;;
+
all0305 |\
aw-nr580 |\
bullet-m |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index c899bdad4e..47260d0341 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -417,6 +417,9 @@ ar71xx_board_detect() {
*"dLAN pro 500 Wireless+")
name="dlan-pro-500-wp"
;;
+ *"dLAN pro 1200+ WiFi ac")
+ name="dlan-pro-1200-ac"
+ ;;
*"Dragino v2")
name="dragino2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 15560c4c53..3355d714a2 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -208,6 +208,7 @@ platform_check_image() {
dir-825-c1 | \
dir-835-a1 | \
dlan-pro-500-wp | \
+ dlan-pro-1200-ac | \
dragino2 | \
esr1750 | \
esr900 | \
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 3b100e9ac9..9a26c29cb2 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
CONFIG_ATH79_MACH_DRAGINO2=y
CONFIG_ATH79_MACH_EAP300V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c
new file mode 100644
index 0000000000..03b9f19835
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c
@@ -0,0 +1,189 @@
+/*
+ * devolo dLAN pro 500 Wireless+ support
+ *
+ * Copyright (c) 2013-2015 devolo AG
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE 13
+#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE 21
+#define DLAN_PRO_1200_AC_GPIO_LED_WLAN 12
+#define DLAN_PRO_1200_AC_GPIO_LED_DLAN 14
+#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR 15
+
+#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN 20
+#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN 22
+#define DLAN_PRO_1200_AC_GPIO_BTN_RESET 4
+#define DLAN_PRO_1200_AC_GPIO_DLAN_IND 17
+#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND 16
+
+#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL)
+
+#define DLAN_PRO_1200_AC_ART_ADDRESS 0x1fff0000
+#define DLAN_PRO_1200_AC_CALDATA_OFFSET 0x1000
+#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET 0x1002
+#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = {
+ {
+ .name = "devolo:status:wlan",
+ .gpio = DLAN_PRO_1200_AC_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "devolo:status:dlan",
+ .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "devolo:error:dlan",
+ .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = {
+ {
+ .desc = "dLAN button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DLAN_PRO_1200_AC_GPIO_BTN_DLAN,
+ .active_low = 1,
+ },
+ {
+ .desc = "WLAN button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DLAN_PRO_1200_AC_GPIO_BTN_WLAN,
+ .active_low = 0,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DLAN_PRO_1200_AC_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = false,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = {
+ .mode = 0,
+ .txclk_delay_en = 0,
+ .rxclk_delay_en = 0,
+ .txclk_delay_sel = 0,
+ .rxclk_delay_sel = 0,
+};
+
+static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = {
+ .pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg,
+ .pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dlan_pro_1200_ac_ar8327_data,
+ },
+};
+
+static void __init dlan_pro_1200_ac_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS);
+ u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET;
+ u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET;
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio),
+ dlan_pro_1200_ac_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys),
+ dlan_pro_1200_ac_gpio_keys);
+
+ /* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */
+ gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "dLAN power");
+
+ /* WLAN power is turned on initially to allow the PCI bus scan to succeed */
+ gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "WLAN power");
+
+ ath79_register_wmac(cal, wifi_mac);
+ ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
+
+ mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info,
+ ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info));
+
+ /* GMAC0 is connected to an AR8337 */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x02000000;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac",
+ dlan_pro_1200_ac_setup);
diff --git a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
index 281c04c47e..741f5d547b 100644
--- a/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
+++ b/target/linux/ar71xx/generic/profiles/devolo-dlan.mk
@@ -17,3 +17,17 @@ define Profile/dLAN_pro_500_wp/Description
Package set optimized for the devolo dLAN pro 500 Wireless+.
endef
$(eval $(call Profile,dLAN_pro_500_wp))
+
+define Profile/dLAN_pro_1200_ac
+ NAME:=devolo dLAN pro 1200+ WiFi ac
+ PACKAGES:=open-plc-utils open-plc-utils-chkpib open-plc-utils-getpib open-plc-utils-modpib \
+ open-plc-utils-setpib open-plc-utils-hpavkey open-plc-utils-plchost \
+ open-plc-utils-plctool open-plc-utils-pibdump open-plc-utils-plcstat \
+ ebtables hostapd-utils wifitoggle wpad ip-full kmod-ath10k kmod-leds-gpio \
+ kmod-ledtrig-gpio
+endef
+
+define Profile/dLAN_pro_1200_ac/Description
+ Package set optimized for the devolo dLAN pro 1200+ WiFi ac.
+endef
+$(eval $(call Profile,dLAN_pro_1200_ac))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index e0830eaca0..b334f017d0 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -927,6 +927,7 @@ eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),1
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),6528k(rootfs),7680k@0x70000(firmware),64k(art)ro
+dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,1152k@0x70000(kernel),14720k(rootfs),15872k@0x70000(firmware),64k(art)ro
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
@@ -1876,6 +1877,7 @@ $(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,tty
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) root=31:5 mem=128M,KRuImage))
+$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) root=31:5 mem=128M,KRuImage))
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
diff --git a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
index 3047e61b89..d50081a175 100644
--- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,193 @@
+@@ -16,22 +16,194 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -39,6 +39,7 @@
+ ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
+ ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
+ ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */
++ ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/
+ ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
+ ATH79_MACH_ESR900, /* EnGenius ESR900 */
+ ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
@@ -267,7 +268,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +75,1007 @@ config ATH79_MACH_AP121
+@@ -11,62 +75,1020 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@@ -615,6 +616,19 @@
+ select ATH79_DEV_WMAC
+ select ATH79_DEV_USB
+
++config ATH79_MACH_DLAN_PRO_1200_AC
++ bool "devolo dLAN pro 1200+ WiFi ac support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++ select ATH79_DEV_NFC
++ select ATH79_DEV_USB
++
+config ATH79_MACH_DRAGINO2
+ bool "DRAGINO V2 support"
+ select SOC_AR933X
@@ -1303,7 +1317,7 @@
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1103,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1116,97 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
@@ -1401,7 +1415,7 @@
endmenu
config SOC_AR71XX
-@@ -124,7 +1235,10 @@ config ATH79_DEV_DSA
+@@ -124,7 +1248,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
@@ -1413,7 +1427,7 @@
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -154,6 +1268,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -154,6 +1281,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
@@ -1427,7 +1441,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,122 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,123 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1449,6 +1463,7 @@
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
++obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o
+obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
+obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o