aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/amazon/Makefile27
-rw-r--r--target/linux/amazon/base-files/etc/config/network18
-rw-r--r--target/linux/amazon/config-3.3102
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/Kconfig67
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/Makefile9
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/board.c69
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/dma-core.c1462
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/dma-core.h69
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/interrupt.c187
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/pci.c279
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/prom.c72
-rw-r--r--target/linux/amazon/files/arch/mips/amazon/setup.c193
-rw-r--r--target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h7
-rw-r--r--target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h52
-rw-r--r--target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h24
-rw-r--r--target/linux/amazon/files/drivers/atm/amazon_tpe.c3074
-rw-r--r--target/linux/amazon/files/drivers/char/amazon_mei.c7918
-rw-r--r--target/linux/amazon/files/drivers/char/ifx_ssc.c2121
-rw-r--r--target/linux/amazon/files/drivers/mtd/maps/amazon.c204
-rw-r--r--target/linux/amazon/files/drivers/net/ethernet/admmod.c1493
-rw-r--r--target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c899
-rw-r--r--target/linux/amazon/files/drivers/tty/serial/amazon_asc.c711
-rw-r--r--target/linux/amazon/files/drivers/watchdog/amazon_wdt.c277
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/adm6996.h232
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon.h1447
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h148
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h220
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h54
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h1169
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h757
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h177
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h258
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h23
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h540
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h142
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h96
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h263
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h552
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/irq.h200
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/model.h29
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/port.h72
-rw-r--r--target/linux/amazon/files/include/asm-mips/amazon/serial.h146
-rw-r--r--target/linux/amazon/image/Makefile30
-rw-r--r--target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch33
-rw-r--r--target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch33
-rw-r--r--target/linux/amazon/patches-3.3/017-wdt-driver.patch10
-rw-r--r--target/linux/amazon/patches-3.3/100-board.patch53
-rw-r--r--target/linux/amazon/patches-3.3/130-mtd_drivers.patch7
-rw-r--r--target/linux/amazon/patches-3.3/140-net_drivers.patch9
-rw-r--r--target/linux/amazon/patches-3.3/150-serial_driver.patch7
-rw-r--r--target/linux/amazon/patches-3.3/160-cfi-swap.patch56
51 files changed, 0 insertions, 26097 deletions
diff --git a/target/linux/amazon/Makefile b/target/linux/amazon/Makefile
deleted file mode 100644
index 9553da098c..0000000000
--- a/target/linux/amazon/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=amazon
-BOARDNAME:=Infineon Amazon
-FEATURES:=squashfs broken
-KERNEL_PATCHVER:=3.3
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
- Build firmware images for Infineon Amazon boards
-endef
-
-define Kernel/Prepare
- $(call Kernel/Prepare/Default)
- mkdir -p $(LINUX_DIR)/arch/mips/include/asm/amazon
- $(CP) $(LINUX_DIR)/include/asm-mips/amazon/*.h $(LINUX_DIR)/arch/mips/include/asm/amazon
-endef
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/amazon/base-files/etc/config/network b/target/linux/amazon/base-files/etc/config/network
deleted file mode 100644
index 9745944bab..0000000000
--- a/target/linux/amazon/base-files/etc/config/network
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth1
- option type bridge
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
- option ip6assign 60
-
-config globals globals
- option ula_prefix auto
diff --git a/target/linux/amazon/config-3.3 b/target/linux/amazon/config-3.3
deleted file mode 100644
index d30e221e98..0000000000
--- a/target/linux/amazon/config-3.3
+++ /dev/null
@@ -1,102 +0,0 @@
-CONFIG_ADM6996_SUPPORT=y
-CONFIG_AMAZON=y
-CONFIG_AMAZON_ASC_UART=y
-CONFIG_AMAZON_MTD=y
-CONFIG_AMAZON_NET_SW=y
-CONFIG_AMAZON_PCI=y
-CONFIG_AMAZON_WDT=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_OVERRIDE=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_KALLSYMS=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
-# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
-# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
-# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
-CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
-# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/amazon/files/arch/mips/amazon/Kconfig b/target/linux/amazon/files/arch/mips/amazon/Kconfig
deleted file mode 100644
index 63055fc2aa..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/Kconfig
+++ /dev/null
@@ -1,67 +0,0 @@
-# copyright 2007 john crispin <blogic@openwrt.org>
-
-menu "Amazon built-in"
-
-config AMAZON_ASC_UART
- bool "Amazon asc uart"
- select SERIAL_CORE
- select SERIAL_CORE_CONSOLE
- default y
-
-config AMAZON_PCI
- bool "Amazon PCI support"
- default y
- select HW_HAS_PCI
- select PCI
-
-config AMAZON_NET_SW
- bool "Amazon network"
- default y
-
-config AMAZON_WDT
- bool "Amazon watchdog timer"
- default y
-
-config AMAZON_MTD
- bool "Amazon MTD map"
- default y
-
-config ADM6996_SUPPORT
- bool "Amazon ADM6996 Switch driver"
- default y
-
-choice
- prompt "Flash Size"
- depends on AMAZON_MTD
-
-config MTD_AMAZON_FLASH_SIZE_2
- bool "2MB"
-
-config MTD_AMAZON_FLASH_SIZE_4
- bool "4MB"
-
-config MTD_AMAZON_FLASH_SIZE_8
- bool "8MB"
-
-config MTD_AMAZON_FLASH_SIZE_16
- bool "16MB"
-
-endchoice
-
-choice
- prompt "Bus Width"
- depends on AMAZON_MTD
-
-config MTD_AMAZON_BUS_WIDTH_8
- bool "8-bit"
-
-config MTD_AMAZON_BUS_WIDTH_16
- bool "16-bit"
-
-config MTD_AMAZON_BUS_WIDTH_32
- bool "32-bit"
-
-endchoice
-
-
-endmenu
diff --git a/target/linux/amazon/files/arch/mips/amazon/Makefile b/target/linux/amazon/files/arch/mips/amazon/Makefile
deleted file mode 100644
index 47761a277a..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Copyright 2007 openwrt.org
-# John Crispin <blogic@openwrt.org>
-#
-# Makefile for Infineon Amazon
-#
-obj-y := dma-core.o interrupt.o prom.o setup.o board.o
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/target/linux/amazon/files/arch/mips/amazon/board.c b/target/linux/amazon/files/arch/mips/amazon/board.c
deleted file mode 100644
index 330cec608e..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/board.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2009 Hauke Mehrtens <hauke@hauke-m.de>
- */
-
-
-#include <linux/platform_device.h>
-#include <asm/amazon/irq.h>
-
-#define AMAZON_FLASH_START 0x13000000
-#define AMAZON_FLASH_MAX 0x1000000
-
-static struct platform_device amazon_mii = {
- .id = 0,
- .name = "amazon_mii0",
-// .dev = {
-// .platform_data = amazon_ethaddr,
-// }
-};
-
-static struct platform_device amazon_wdt = {
- .id = 0,
- .name = "amazon_wdt",
-};
-
-static struct platform_device amazon_asc = {
- .id = 0,
- .name = "amazon_asc",
-};
-
-static struct resource amazon_mtd_resource = {
- .start = AMAZON_FLASH_START,
- .end = AMAZON_FLASH_START + AMAZON_FLASH_MAX - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device amazon_mtd = {
- .id = 0,
- .name = "amazon_mtd",
- .num_resources = 1,
- .resource = &amazon_mtd_resource,
-};
-
-
-struct platform_device *amazon_devs[] = {
- &amazon_mii, &amazon_mtd, &amazon_wdt, &amazon_asc
-};
-
-
-int __init amazon_init_devices(void)
-{
- printk(KERN_INFO "");
- return platform_add_devices(amazon_devs, 4);
-}
-
-arch_initcall(amazon_init_devices);
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.c b/target/linux/amazon/files/arch/mips/amazon/dma-core.c
deleted file mode 100644
index 8cb4085202..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/dma-core.c
+++ /dev/null
@@ -1,1462 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- * Driver for Infineon Amazon DMA
- */
-//-----------------------------------------------------------------------
-/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created: 7-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Last changed on: 4-May-2004
- * Last changed by: <peng.liu@infineon.com>
- * Reason: debug
- */
-//-----------------------------------------------------------------------
-/* Last changed on: 03-Dec-2004
- * Last changed by: peng.liu@infineon.com
- * Reason: recover from TPE bug
- */
-
-//000004:fchang 2005/6/2 Modified by Linpeng as described below
-//-----------------------------------------------------------------------
-/* Last changed on: 28-Jan-2004
- * Last changed by: peng.liu@infineon.com
- * Reason:
- * - handle "out of memory" bug
- */
-//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic).
-//507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
-
-#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-#define MODVERSIONS
-#endif
-
-#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
-#include <linux/modversions.h>
-#endif
-
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB /* need this one 'cause we export symbols */
-#endif
-
-#undef DMA_NO_POLLING
-
-/* no TX interrupt handling */
-#define NO_TX_INT
-/* need for DMA workaround */
-#undef AMAZON_DMA_TPE_AAL5_RECOVERY
-
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-#define MAX_SYNC_FAILS 1000000 // 000004:fchang
-unsigned int dma_sync_fails = 0;
-unsigned int total_dma_tpe_reset = 0;
-int (*tpe_reset) (void);
-int (*tpe_start) (void);
-int (*tpe_inject) (void);
-#endif // AMAZON_DMA_TPE_AAL5_RECOVERY
-
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon_dma.h>
-#include "dma-core.h"
-
-#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args)
-
-static irqreturn_t dma_interrupt(int irq, void *dev_id);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-/***************************************** global data *******************************************/
-u64 *g_desc_list;
-dev_list *g_current_dev = NULL;
-dev_list *g_head_dev = NULL;
-dev_list *g_tail_dev = NULL;
-channel_info g_log_chan[CHAN_TOTAL_NUM + 1];
-struct proc_dir_entry *g_amazon_dma_dir;
-static u8 rx_chan_list_len = 0;
-static u8 tx_chan_list_len = 0;
-static int rx_chan_list[RX_CHAN_NUM + 1];
-static int tx_chan_list[TX_CHAN_NUM + 1];
-static u32 comb_isr_mask[CHAN_TOTAL_NUM];
-
-static inline int is_rx_chan(int chan_no)
-/*judge if this is an rx channel*/
-{
- int result = 0;
- if (chan_no < RX_CHAN_NUM)
- result = 1;
- return result;
-}
-
-/* Ugly, Channel ON register is badly mapped to channel no. */
-static u8 ch_on_mapping[CHAN_TOTAL_NUM] =
- { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 };
-
-/* Brief: check wether the chan_no is legal
- * Parameter: chan_no: logical channel number
- * Return: 0 if is not valid
- * 1 if is valid
- */
-static inline int is_valid_dma_ch(int chan_no)
-{
- return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM));
-}
-
-/* Brief: check whether a channel is open through Channel ON register
- * Parameter: chan_no: logical channel number
- * Return: 1 channel is open
- * 0 not yet
- * EINVAL: invalid parameter
- */
-static inline int is_channel_open(int chan_no)
-{
- return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
- (1 << ch_on_mapping[chan_no]));
-}
-
-/* Brief: add a list entry
- * Description:
- * always add to the tail and no redundancy allowed. (i.e. entries are unique)
- * 0 : entry deleted
- * <0 : not deleted (due to not unique)
- */
-static inline int _add_list_entry(int *list, int size_of_list, int entry)
-{
- int i;
- for (i = 0; i < size_of_list; i++) {
- if (list[i] == entry)
- break;
- if (list[i] < 0) {
- list[i] = entry;
- return 0;
- }
- }
- return -1;
-}
-
-/* Brief: delete a list entry
- * Description:
- * find the entry and remove it. shift all entries behind it one step forward if necessary\
- * Return:
- * 0 : entry deleted
- * <0 : not deleted (due to not found?)
- */
-static inline int _delete_list_entry(int *list, int size_of_list,
- int entry)
-{
- int i, j;
- for (i = 0; i < size_of_list; i++) {
- if (list[i] == entry) {
- for (j = i; j < size_of_list; j++) {
- list[j] = list[j + 1];
- if (list[j + 1] < 0) {
- break;
- }
- }
- return 0;
- }
- }
- return -1;
-}
-
-/* Brief: enable a channel through Channel ON register
- * Parameter: chan_no: logical channel number
- * Description:
- * Please don't open a channel without a valid descriptor (hardware pitfall)
- */
-static inline void open_channel(int chan_no)
-{
- AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
- if (is_rx_chan(chan_no)) {
- if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
- rx_chan_list_len++;
- } else {
- AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
- }
- } else {
- if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
- tx_chan_list_len++;
- } else {
- AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no);
- }
- }
-}
-
-/* Brief: disable a channel through Channel ON register
- * Parameter: chan_no: logical channel number
- */
-
-static inline void close_channel(int chan_no)
-{
- AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
- if (is_rx_chan(chan_no)) {
- if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) {
- rx_chan_list_len--;
- } else {
- AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
- chan_no);
- }
- } else {
- if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) {
- tx_chan_list_len--;
- } else {
- AMAZON_DMA_DMSG("cannot remove chan %d from open list \n",
- chan_no);
- }
- }
-}
-
-/* Brief: clear RX interrupt
- */
-inline void rx_chan_clear_isr(int chan_no)
-{
-#ifdef DMA_NO_POLLING
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
- (AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- chan_no *
- AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT
- | DMA_ISR_DURR));
-#else
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
- (AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- chan_no *
- AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
- DMA_ISR_CMDCPT));
-#endif
-}
-
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
-/* Brief: hacking function, this will reset all descriptors back to DMA
- */
-static void dma_reset_all_descriptors(int chan_no)
-{
- volatile struct rx_desc *rx_desc_p = NULL;
- int i;
- rx_desc_p =
- (struct rx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base;
- for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
- rx_desc_p->status.word &=
- (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET));
- rx_desc_p->status.word |=
- (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size);
- rx_desc_p++;
- }
-}
-
-/* Brief: Reset DMA descriptors
- */
-static void amazon_dma_reset_tpe_rx(int chan_no)
-{
- struct tx_desc *tx_desc_p = NULL;
- int j, i = 0;
-
- // wait until all TX channels stop transmitting
- for (j = 9; j <= 10; j++) {
- tx_desc_p =
- (struct tx_desc *) g_desc_list +
- g_log_chan[j].offset_from_base;
- for (i = 0; i < g_log_chan[j].desc_len; i++) {
- while ((tx_desc_p->status.field.OWN != CPU_OWN)) {
- AMAZON_DMA_DMSG("DMA TX in progress\n"); // 000004:fchang
- udelay(100);
- }
- tx_desc_p++;
- }
- }
-
- if (tpe_reset) {
- total_dma_tpe_reset++;
- AMAZON_DMA_DMSG
- ("\n===============resetting TPE========================== \n");
- if ((*tpe_reset) ()) {
- panic("cannot reset TPE engien\n"); // 000004:fchang
- }
- } else {
- panic("no tpe_reset function\n"); // 000004:fchang
- return;
- }
- dma_reset_all_descriptors(chan_no);
- rx_chan_clear_isr(chan_no);
- mb();
-
- // send EoP
- if (tpe_inject) {
- if ((*tpe_inject) ()) {
- panic("cannot inject a cell\n"); // 000004:fchang
- }
- } else {
- AMAZON_DMA_EMSG("no tpe_inject function\n");
- return;
- }
- mb();
- while (1) {
- if (AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) {
- rx_chan_clear_isr(chan_no);
- mb();
- dma_reset_all_descriptors(chan_no);
- if (g_log_chan[chan_no].current_desc ==
- (g_log_chan[chan_no].desc_len - 1)) {
- g_log_chan[chan_no].current_desc = 0;
- } else {
- g_log_chan[chan_no].current_desc++;
- }
- break;
- }
- mdelay(1);
- }
- mb();
-#if 0
- AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]);
- while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &
- (1 << ch_on_mapping[chan_no])) {
- printk("TPE channel still on\n");
- mdelay(1);
- }
-
- // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<<chan_no);
- mb();
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + chan_no * AMAZON_DMA_CH_STEP) =
- 0x32;
- mb();
- rx_chan_clear_isr(chan_no);
- dma_reset_all_descriptors(chan_no);
- mb();
- AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]);
- // g_log_chan[chan_no].current_desc=0;
- mb();
- mdelay(1);
-#endif
- if (tpe_start) {
- (*tpe_start) ();
- } else {
- AMAZON_DMA_EMSG("cannot restart TPE engien\n");
- }
-}
-#endif // AMAZON_DMA_TPE_AAL5_RECOVERY
-
-
-/* Brief: RX channel interrupt handler
- * Parameter: RX channel no
- * Description: the interrupt handler for each RX channel
- * 1. check descriptor, clear ISR if no incoming packet
- * 2. inform upper layer to receive packet (and update descriptors)
- */
-inline void rx_chan_intr_handler(int chan_no)
-{
- volatile struct rx_desc *rx_desc_p = NULL;
-
- /* fetch the current descriptor */
- rx_desc_p =
- (struct rx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base +
- g_log_chan[chan_no].current_desc;
-
- g_log_chan[chan_no].dma_dev->current_rx_chan =
- chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base;
-
- // workaround for DMA pitfall: complete bit set happends before the
- // other two bits (own,eop) are ready
- if ((rx_desc_p->status.field.EoP != 1)
- || (rx_desc_p->status.field.OWN != CPU_OWN)
- || (rx_desc_p->status.field.data_length ==
- g_log_chan[chan_no].packet_size)) {
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
- if (chan_no == 4 || chan_no == 5) {
- dma_sync_fails++;
- if (dma_sync_fails > MAX_SYNC_FAILS) {
- // detect bug
- rx_desc_p0 =
- (struct rx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base;
- rx_desc_p1 =
- (struct rx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base + 1;
- if ((rx_desc_p0->status.field.OWN == CPU_OWN
- && rx_desc_p0->status.field.EoP != 1)
- && (rx_desc_p1->status.field.OWN == CPU_OWN
- && rx_desc_p1->status.field.EoP != 1)) {
- amazon_dma_reset_tpe_rx(chan_no);
- dma_sync_fails = 0;
- return;
- }
- dma_sync_fails = 0;
- AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no); // 000004:fchang
- return;
- }
- udelay(10); // 000004:fchang
- }
-#endif // //AMAZON_DMA_TPE_AAL5_RECOVERY
- return;
- }
-
- /* inform the upper layer to receive the packet */
- g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT);
- /* check the next descriptor, if still contains the incoming packet,
- then do not clear the interrupt status */
- rx_desc_p =
- (struct rx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base +
- g_log_chan[chan_no].current_desc;
- if (!
- ((rx_desc_p->status.field.OWN == CPU_OWN)
- && (rx_desc_p->status.field.C == 1))) {
- rx_chan_clear_isr(chan_no);
- }
-}
-
-
-/* Brief: TX channel interrupt handler
- * Parameter: TX channel no
- * Description: the interrupt handler for each TX channel
- * 1. check all the descripters,if any of them had transmitted a packet, then free buffer
- * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here
- * 2. clear the interrupt status bit
- */
-inline void tx_chan_intr_handler(int chan_no)
-{
- struct tx_desc *tx_desc_p = NULL;
- int i = 0;
-
- tx_desc_p =
- (struct tx_desc *) g_desc_list +
- g_log_chan[chan_no].offset_from_base;
-
- for (i = 0; i < g_log_chan[chan_no].desc_len; i++) {
- if ((tx_desc_p->status.field.OWN == CPU_OWN)
- && (tx_desc_p->status.field.C == 1)) {
- /* if already transmitted, then free the buffer */
- g_log_chan[chan_no].
- buffer_free((u8 *) __va(tx_desc_p->Data_Pointer),
- g_log_chan[chan_no].opt[i]);
- tx_desc_p->status.field.C = 0;
- /* inform the upper layer about the completion of the
- transmitted packet, the upper layer may want to free the
- packet */
- g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev,
- TRANSMIT_CPT_INT);
- }
- tx_desc_p++;
- }
-
- /* after all these operations, clear the interrupt status bit */
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) =
- (AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- chan_no *
- AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP |
- DMA_ISR_CMDCPT));
-}
-
-/* Brief: DMA interrupt handler
- */
-static irqreturn_t dma_interrupt(int irq, void *dev_id)
-{
- int i = 0;
- int chan_no;
- u32 isr = 0;
-#ifdef NO_TX_INT // 000004:fchang
- static int cnt = 0; // 000004:fchang
-#endif // 000004:fchang
- while ((isr =
- AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK |
- COMB_ISR_TX_MASK)) {
- if (isr & COMB_ISR_RX_MASK) {
- // RX Channels: start WFQ algorithm
- chan_no = CHAN_TOTAL_NUM;
- for (i = 0; i < RX_CHAN_NUM; i++) {
- if ((isr & (comb_isr_mask[i]))
- && (g_log_chan[i].weight > 0)) {
- if (g_log_chan[chan_no].weight < g_log_chan[i].weight) {
- chan_no = i;
- }
- }
- }
- if (chan_no < CHAN_TOTAL_NUM) {
- rx_chan_intr_handler(chan_no);
- } else {
- for (i = 0; i < RX_CHAN_NUM; i++) {
- g_log_chan[i].weight = g_log_chan[i].default_weight;
- }
- }
- }
-#ifdef NO_TX_INT
- cnt++;
- if (cnt == 10) {
- cnt = 0;
- for (i = 0; i < tx_chan_list_len; i++) {
- if (AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- tx_chan_list[i] *
- AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) {
- tx_chan_intr_handler(tx_chan_list[i]);
- }
- }
- }
-#else
- if (isr & COMB_ISR_TX_MASK) {
- // TX channels: RR
- for (i = 0; i < tx_chan_list_len; i++) {
- if (isr & (comb_isr_mask[tx_chan_list[i]])) {
- tx_chan_intr_handler(tx_chan_list[i]);
- }
- }
- }
-#endif
- } // while
- return IRQ_HANDLED;
-}
-
-
-/* Brief: read a packet from DMA RX channel
- * Parameter:
- * Return: packet length
- * Description:
- * This is called back in a context of DMA interrupt
- * 1. prepare new descriptor
- * 2. read data
- * 3. update WFQ weight
- */
-//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt)
-int asmlinkage dma_device_read(struct dma_device_info *dma_dev,
- u8 ** dataptr, void **opt)
-{
- u8 *buf;
- int len;
- int chan_no = 0;
- int byte_offset = 0;
-
- struct rx_desc *rx_desc_p;
- void *p = NULL;
- int current_desc;
-
- chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan;
- current_desc = g_log_chan[chan_no].current_desc;
- rx_desc_p =
- (struct rx_desc *) (g_desc_list +
- g_log_chan[chan_no].offset_from_base +
- current_desc);
- buf = (u8 *) __va(rx_desc_p->Data_Pointer); /* extract the virtual
- address of the data
- pointer */
- len = rx_desc_p->status.field.data_length; /* extract the data length */
-#ifndef CONFIG_MIPS_UNCACHED
- dma_cache_inv((unsigned long) buf, len);
-#endif // CONFIG_MIPS_UNCACHED
- *(u32 *) dataptr = (u32) buf;
- if (opt) {
- *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc]; /* read
- out
- the
- opt
- information */
- }
-
- buf =
- (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no].
- packet_size, &byte_offset,
- &p);
- // should check null!!!!
- if (buf == NULL || p == NULL) {
- *(u32 *) dataptr = 0;
- *(int *) opt = 0;
- len = 0;
- } else {
- g_log_chan[chan_no].opt[current_desc] = p;
- /* reduce the weight for WFQ algorithm */
- g_log_chan[chan_no].weight -= len;
- rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf);
- }
- if (current_desc == g_log_chan[chan_no].desc_len - 1) {
- current_desc = 0;
- } else {
- current_desc++;
- }
- g_log_chan[chan_no].current_desc = current_desc;
-
- rx_desc_p->status.word = DMA_DESC_OWN_DMA
- | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
- | g_log_chan[chan_no].packet_size;
- return len;
-}
-
-/* Brief: write a packet through DMA RX channel to peripheral
- * Parameter:
- * Return: packet length
- * Description:
- *
- */
-u64 dma_tx_drop = 0;
-//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt)
-int asmlinkage dma_device_write(struct dma_device_info *dma_dev,
- u8 * dataptr, int len, void *opt)
-{
- int chan_no = 0;
- struct tx_desc *tx_desc_p;
-
- int byte_offset = 0;
- int current_desc;
- static int cnt = 0; // 000004:fchang
-
- unsigned long flag;
- local_irq_save(flag);
-
- chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan;
- current_desc = g_log_chan[chan_no].current_desc;
- tx_desc_p =
- (struct tx_desc *) (g_desc_list +
- g_log_chan[chan_no].offset_from_base +
- current_desc);
- // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
- if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
- AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n");
- dma_tx_drop++;
- g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
- local_irq_restore(flag);
- return 0;
- }
- g_log_chan[chan_no].opt[current_desc] = opt;
-
- /* byte offset----to adjust the starting address of the data buffer,
- should be multiple of the burst length. */
- byte_offset =
- ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len *
- 4);
-#ifndef CONFIG_MIPS_UNCACHED
- dma_cache_wback((unsigned long) dataptr, len);
- wmb();
-#endif // CONFIG_MIPS_UNCACHED
-
- tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset;
- wmb();
- tx_desc_p->status.word = DMA_DESC_OWN_DMA
- | DMA_DESC_SOP_SET
- | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT)
- | len;
- wmb();
- if (is_channel_open(chan_no) == 0) {
- // turn on if necessary
- open_channel(chan_no);
- }
-#ifdef DMA_NO_POLLING
- if ((AMAZON_DMA_REG32
- (AMAZON_DMA_CH0_ISR +
- chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) ==
- (DMA_ISR_DURR)) {
- // clear DURR if (CPT is AND set and DURR is set)
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR +
- chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR;
- }
-#endif
-
- if (current_desc == (g_log_chan[chan_no].desc_len - 1)) {
- current_desc = 0;
- } else {
- current_desc++;
- }
-
-
- g_log_chan[chan_no].current_desc = current_desc;
- tx_desc_p =
- (struct tx_desc *) (g_desc_list +
- g_log_chan[chan_no].offset_from_base +
- current_desc);
- // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){
- if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen
- g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT);
- }
-#ifdef NO_TX_INT
-//000004:fchang Start
- cnt++;
- if (cnt == 5) {
- cnt = 0;
- tx_chan_intr_handler(chan_no);
- }
-//000004:fchang End
-#endif
- local_irq_restore(flag); // 000004:fchang
- return len;
-}
-
-
-
-int desc_list_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int i;
- u32 *p = (u32 *) g_desc_list;
- int len = 0;
- len += sprintf(buf + len, "descriptor list:\n");
- for (i = 0; i < 120; i++) {
- len += sprintf(buf + len, "%d\n", i);
- len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1));
- len += sprintf(buf + len, "%08x\n", *(p + i * 2));
-
- }
-
- return len;
-
-}
-
-int channel_weight_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
-
- // int i=0;
- int len = 0;
- len += sprintf(buf + len, "Qos dma channel weight list\n");
- len +=
- sprintf(buf + len,
- "channel_num default_weight current_weight device Tx/Rx\n");
- len +=
- sprintf(buf + len,
- " 0 %08x %08x Switch Rx0\n",
- g_log_chan[0].default_weight, g_log_chan[0].weight);
- len +=
- sprintf(buf + len,
- " 1 %08x %08x Switch Rx1\n",
- g_log_chan[1].default_weight, g_log_chan[1].weight);
- len +=
- sprintf(buf + len,
- " 2 %08x %08x Switch Rx2\n",
- g_log_chan[2].default_weight, g_log_chan[2].weight);
- len +=
- sprintf(buf + len,
- " 3 %08x %08x Switch Rx3\n",
- g_log_chan[3].default_weight, g_log_chan[3].weight);
- len +=
- sprintf(buf + len,
- " 4 %08x %08x Switch Tx0\n",
- g_log_chan[4].default_weight, g_log_chan[4].weight);
- len +=
- sprintf(buf + len,
- " 5 %08x %08x Switch Tx1\n",
- g_log_chan[5].default_weight, g_log_chan[5].weight);
- /*
- len+=sprintf(buf+len," 6 %08x %08x TPE
- Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight);
- len+=sprintf(buf+len," 7 %08x %08x TPE
- Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight);
- len+=sprintf(buf+len," 8 %08x %08x TPE
- Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight);
- len+=sprintf(buf+len," 9 %08x %08x TPE
- Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight);
- len+=sprintf(buf+len," 10 %08x %08x DPLUS
- Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight);
- len+=sprintf(buf+len," 11 %08x %08x DPLUS
- Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */
- return len;
-}
-
-int dma_register_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- dev_list *temp_dev;
- int len = 0;;
-
- len += sprintf(buf + len, "amazon dma driver\n");
- len += sprintf(buf + len, "version 1.0\n");
- len += sprintf(buf + len, "devices registered:\n");
- for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
- len += sprintf(buf + len, "%s ", temp_dev->dev->device_name);
- }
- len += sprintf(buf + len, "\n");
- len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON));
- len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST));
- len += sprintf(buf + len, "CH0_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR));
- len += sprintf(buf + len, "CH1_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR));
- len += sprintf(buf + len, "CH2_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR));
- len += sprintf(buf + len, "CH3_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR));
- len += sprintf(buf + len, "CH4_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR));
- len += sprintf(buf + len, "CH5_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR));
- len += sprintf(buf + len, "CH6_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR));
- len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR));
- len += sprintf(buf + len, "CH8_ISR=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR));
- len +=
- sprintf(buf + len, "CH9_ISR=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR));
- len +=
- sprintf(buf + len, "CH10_ISR=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR));
- len +=
- sprintf(buf + len, "CH11_ISR=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR));
- len +=
- sprintf(buf + len, "LCH0_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK));
- len +=
- sprintf(buf + len, "LCH1_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK));
- len +=
- sprintf(buf + len, "LCH2_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK));
- len +=
- sprintf(buf + len, "LCH3_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK));
- len +=
- sprintf(buf + len, "LCH4_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK));
- len +=
- sprintf(buf + len, "LCH5_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK));
- len +=
- sprintf(buf + len, "LCH6_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK));
- len +=
- sprintf(buf + len, "LCH7_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK));
- len +=
- sprintf(buf + len, "LCH8_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK));
- len +=
- sprintf(buf + len, "LCH9_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK));
- len +=
- sprintf(buf + len, "LCH10_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK));
- len +=
- sprintf(buf + len, "LCH11_MSK=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK));
- len +=
- sprintf(buf + len, "Desc_BA=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA));
- len +=
- sprintf(buf + len, "LCH0_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN));
- len +=
- sprintf(buf + len, "LCH1_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN));
- len +=
- sprintf(buf + len, "LCH2_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN));
- len +=
- sprintf(buf + len, "LCH3_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN));
- len +=
- sprintf(buf + len, "LCH4_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN));
- len +=
- sprintf(buf + len, "LCH5_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN));
- len +=
- sprintf(buf + len, "LCH6_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN));
- len +=
- sprintf(buf + len, "LCH7_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN));
- len +=
- sprintf(buf + len, "LCH8_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN));
- len +=
- sprintf(buf + len, "LCH9_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN));
- len +=
- sprintf(buf + len, "LCH10_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN));
- len +=
- sprintf(buf + len, "LCH11_DES_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN));
- len +=
- sprintf(buf + len, "LCH1_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST));
- len +=
- sprintf(buf + len, "LCH2_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST));
- len +=
- sprintf(buf + len, "LCH3_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST));
- len +=
- sprintf(buf + len, "LCH4_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST));
- len +=
- sprintf(buf + len, "LCH5_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST));
- len +=
- sprintf(buf + len, "LCH6_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST));
- len +=
- sprintf(buf + len, "LCH7_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST));
- len +=
- sprintf(buf + len, "LCH8_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST));
- len +=
- sprintf(buf + len, "LCH9_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST));
- len +=
- sprintf(buf + len, "LCH10_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST));
- len +=
- sprintf(buf + len, "LCH11_DES_OFST=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST));
- len +=
- sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_SW_BL));
- len +=
- sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL));
- len +=
- sprintf(buf + len, "DPlus2FPI_BL=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL));
- len +=
- sprintf(buf + len, "GRX_BUF_LEN=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN));
- len +=
- sprintf(buf + len, "DMA_ECON_REG=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG));
- len +=
- sprintf(buf + len, "POLLING_REG=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG));
- len +=
- sprintf(buf + len, "CH_WGT=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT));
- len +=
- sprintf(buf + len, "TX_WGT=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT));
- len +=
- sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS));
- len +=
- sprintf(buf + len, "COMB_ISR=%08x\n",
- AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR));
-#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY
- len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset); // 000004:fchang
-#endif
- return len;
-}
-
-/* Brief: initialize DMA registers
- * Description:
- */
-static void dma_chip_init(void)
-{
- int i;
- for (i = 0; i < CHAN_TOTAL_NUM; i++) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST +
- i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET;
- }
-#ifdef DMA_NO_POLLING
- AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0;
-#else
- // enable poll mode and set polling counter
- AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE;
-#endif
- // to enable DMA drop
- AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000;
-}
-
-int insert_dev_list(dev_list * dev)
-{
- dev_list *temp_dev;
- if (g_head_dev == NULL) {
- g_head_dev = dev;
- g_tail_dev = dev;
- dev->prev = NULL;
- dev->next = NULL;
- } else {
- for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
- if (temp_dev->weight < dev->weight) {
- if (temp_dev->prev)
- temp_dev->prev->next = dev;
-
- dev->prev = temp_dev->prev;
- dev->next = temp_dev;
- temp_dev->prev = dev;
- if (temp_dev == g_head_dev)
- g_head_dev = dev;
- break;
- }
- }
-
- if (!temp_dev) {
- g_tail_dev->next = dev;
- dev->prev = g_tail_dev;
- dev->next = NULL;
- g_tail_dev = dev;
- }
-
- }
-
- return 1;
-}
-
-u8 *common_buffer_alloc(int len, int *byte_offset, void **opt)
-{
- u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL);
- *byte_offset = 0;
- return buffer;
-
-}
-
-int common_buffer_free(u8 * dataptr, void *opt)
-{
- if (dataptr)
- kfree(dataptr);
- return 0;
-}
-
-
-int register_dev(struct dma_device_info *dma_dev)
-{
- int i, j, temp;
- int burst_reg = 0;
- u8 *buffer;
- void *p = NULL;
- int byte_offset = 0;
-
- struct rx_desc *rx_desc_p;
- struct tx_desc *tx_desc_p;
- if (strcmp(dma_dev->device_name, "switch1") == 0) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest
- // channel
- // 1st
- AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian
- // conversion
- // for Switch
- burst_reg = AMAZON_DMA_SW_BL;
- dma_dev->logic_rx_chan_base = switch_rx_chan_base;
- dma_dev->logic_tx_chan_base = switch_tx_chan_base;
- }
-
- else if (strcmp(dma_dev->device_name, "switch2") == 0) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest
- // channel
- // 1st
- AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian
- // conversion
- // for Switch
- burst_reg = AMAZON_DMA_SW_BL;
- dma_dev->logic_rx_chan_base = switch2_rx_chan_base;
- dma_dev->logic_tx_chan_base = switch2_tx_chan_base;
-
- } else if (strcmp(dma_dev->device_name, "TPE") == 0) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK; // resest
- // channel 1st
- //
- burst_reg = AMAZON_DMA_TPE_BL;
- dma_dev->logic_rx_chan_base = TPE_rx_chan_base;
- dma_dev->logic_tx_chan_base = TPE_tx_chan_base;
- }
-
- else if (strcmp(dma_dev->device_name, "DPlus") == 0) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK; // resest
- // channel
- // 1st
- dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base;
- dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base;
-
- }
-
- i = 0;
- for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) {
- i += 1;
- }
-
-
- AMAZON_DMA_REG32(burst_reg) = i << 1;
- i = 0;
- for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) {
- i += 1;
- }
- AMAZON_DMA_REG32(burst_reg) += i;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++) {
-
- temp = dma_dev->logic_rx_chan_base + i;
- g_log_chan[temp].dma_dev = dma_dev;
- g_log_chan[temp].weight = dma_dev->rx_chan[i].weight;
- g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight;
- g_log_chan[temp].current_desc = 0;
- g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
- g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num;
- g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
- g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size;
-
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num;
- // enable interrupt mask
- if (temp == 4 || temp == 5) {
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32;
- } else {
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
- }
- strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
- g_log_chan[temp].burst_len = dma_dev->rx_burst_len;
- g_log_chan[temp].control = dma_dev->rx_chan[i].control;
-
-
- /* specify the buffer allocation and free method */
- if (dma_dev->buffer_alloc)
- g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
- else
- g_log_chan[temp].buffer_alloc = common_buffer_alloc;
-
- if (dma_dev->buffer_free)
- g_log_chan[temp].buffer_free = dma_dev->buffer_free;
- else
- g_log_chan[temp].buffer_free = common_buffer_free;
-
- if (dma_dev->intr_handler)
- g_log_chan[temp].intr_handler = dma_dev->intr_handler;
- else
- g_log_chan[temp].intr_handler = NULL;
-
- for (j = 0; j < g_log_chan[temp].desc_len; j++) {
- rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j);
- rx_desc_p->status.word = 0;
- rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size;
- buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p);
- rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer);
- rx_desc_p->status.field.byte_offset = byte_offset;
- /* fix me, should check if the addresss comply with the burst
- lenght requirment */
- g_log_chan[temp].opt[j] = p;
- rx_desc_p->status.field.OWN = DMA_OWN;
-
- }
- /* open or close the channel */
- if (g_log_chan[temp].control)
- open_channel(temp);
- else
- close_channel(temp);
- }
-
- for (i = 0; i < dma_dev->num_tx_chan; i++) {
- temp = dma_dev->logic_tx_chan_base + i;
- g_log_chan[temp].dma_dev = dma_dev;
- g_log_chan[temp].weight = dma_dev->tx_chan[i].weight;
- g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight;
- g_log_chan[temp].current_desc = 0;
- g_log_chan[temp].desc_ofst = DEFAULT_OFFSET;
- g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num;
- g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET;
- g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size;
-
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num;
- // enable interrupt mask
-#ifdef NO_TX_INT
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e;
-#else
- AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36;
-#endif
-
- strcpy(g_log_chan[temp].device_name, dma_dev->device_name);
- g_log_chan[temp].burst_len = dma_dev->tx_burst_len;
- g_log_chan[temp].control = dma_dev->tx_chan[i].control;
-
- if (dma_dev->buffer_alloc)
- g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc;
- else
- g_log_chan[temp].buffer_alloc = common_buffer_alloc;
-
- if (dma_dev->buffer_free)
- g_log_chan[temp].buffer_free = dma_dev->buffer_free;
- else
- g_log_chan[temp].buffer_free = common_buffer_free;
-
- if (dma_dev->intr_handler)
- g_log_chan[temp].intr_handler = dma_dev->intr_handler;
- else
- g_log_chan[temp].intr_handler = NULL;
-
- for (j = 0; j < g_log_chan[temp].desc_len; j++) {
-
- tx_desc_p =
- (struct tx_desc *) (g_desc_list +
- g_log_chan[temp].offset_from_base + j);
- tx_desc_p->status.word = 0;
- tx_desc_p->status.field.data_length =
- g_log_chan[temp].packet_size;
- tx_desc_p->status.field.OWN = CPU_OWN;
-
- }
- /* workaround DMA pitfall, we never turn on channel if we don't
- have proper descriptors */
- if (!g_log_chan[temp].control) {
- close_channel(temp);
- }
-
- }
-
- return 0;
-}
-
-int dma_device_register(struct dma_device_info *dma_dev)
-{
- dev_list *temp_dev;
- temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL);
- temp_dev->dev = dma_dev;
- temp_dev->weight = dma_dev->weight;
- insert_dev_list(temp_dev);
- /* check whether this is a known device */
- if ((strcmp(dma_dev->device_name, "switch1") == 0)
- || (strcmp(dma_dev->device_name, "TPE") == 0)
- || (strcmp(dma_dev->device_name, "switch2") == 0)
- || (strcmp(dma_dev->device_name, "DPlus") == 0)) {
- register_dev(dma_dev);
- }
-
- return 0;
-}
-
-
-int unregister_dev(struct dma_device_info *dma_dev)
-{
- int i, j, temp;
- u8 *buffer;
- struct rx_desc *rx_desc_p;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++) {
- temp = dma_dev->logic_rx_chan_base + i;
- close_channel(temp);
- for (j = 0; j < g_log_chan[temp].desc_len; j++) {
- rx_desc_p =
- (struct rx_desc *) (g_desc_list +
- g_log_chan[temp].offset_from_base + j);
- buffer = (u8 *) __va(rx_desc_p->Data_Pointer);
- g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]);
- }
- }
- for (i = 0; i < dma_dev->num_tx_chan; i++) {
- temp = dma_dev->logic_tx_chan_base + i;
- close_channel(temp);
- }
- return 0;
-}
-
-int dma_device_unregister(struct dma_device_info *dev)
-{
- dev_list *temp_dev;
- for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
- if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) {
- if ((strcmp(dev->device_name, "switch1") == 0)
- || (strcmp(dev->device_name, "TPE") == 0)
- || (strcmp(dev->device_name, "switch2") == 0)
- || (strcmp(dev->device_name, "DPlus") == 0))
- unregister_dev(dev);
- if (temp_dev == g_head_dev) {
- g_head_dev = temp_dev->next;
- kfree(temp_dev);
- } else {
- if (temp_dev == g_tail_dev)
- g_tail_dev = temp_dev->prev;
- if (temp_dev->prev)
- temp_dev->prev->next = temp_dev->next;
- if (temp_dev->next)
- temp_dev->next->prev = temp_dev->prev;
- kfree(temp_dev);
- }
- break;
- }
-
- }
- return 0;
-}
-
-void dma_device_update_rx(struct dma_device_info *dma_dev)
-{
- int i, temp;
- for (i = 0; i < dma_dev->num_rx_chan; i++) {
- temp = dma_dev->logic_rx_chan_base + i;
- g_log_chan[temp].control = dma_dev->rx_chan[i].control;
-
- if (g_log_chan[temp].control)
- open_channel(temp);
- else
- close_channel(temp);
- }
-
-}
-
-void dma_device_update_tx(struct dma_device_info *dma_dev)
-{
- int i, temp;
- for (i = 0; i < dma_dev->num_tx_chan; i++) {
- temp = dma_dev->logic_tx_chan_base + i;
- g_log_chan[temp].control = dma_dev->tx_chan[i].control;
- if (g_log_chan[temp].control) {
- /* we turn on channel when send out the very first packet */
- // open_channel(temp);
- } else
- close_channel(temp);
- }
-}
-
-int dma_device_update(struct dma_device_info *dma_dev)
-{
- dma_device_update_rx(dma_dev);
- dma_device_update_tx(dma_dev);
- return 0;
-}
-
-static int dma_open(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int dma_release(struct inode *inode, struct file *file)
-{
- /* release the resources */
- return 0;
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long dma_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-#else
-static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-#endif
-{
- int value = 0;
- int chan_no = 0;
-
- switch (cmd) {
- case 0: /* get register value */
- break;
- case 1: /* return channel weight */
- chan_no = *((int *) arg);
- *((int *) arg + 1) = g_log_chan[chan_no].default_weight;
- break;
- case 2: /* set channel weight */
- chan_no = *((int *) arg);
- value = *((int *) arg + 1);
- printk("new weight=%08x\n", value);
- g_log_chan[chan_no].default_weight = value;
- break;
- default:
- break;
- }
- return 0;
-}
-
-
-static struct file_operations dma_fops = {
- owner:THIS_MODULE,
- open:dma_open,
- release:dma_release,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
- unlocked_ioctl:dma_ioctl,
-#else
- ioctl:dma_ioctl,
-#endif
-};
-
-static int dma_init(void)
-{
- int result = 0;
- int i;
- printk("initialising dma core\n");
- result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops);
- if (result) {
- AMAZON_DMA_EMSG("cannot register device dma-core!\n");
- return result;
- }
- result = request_irq(AMAZON_DMA_INT, dma_interrupt, IRQF_DISABLED, "dma-core", (void *) &dma_interrupt);
- if (result) {
- AMAZON_DMA_EMSG("error, cannot get dma_irq!\n");
- free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
- return -EFAULT;
- }
-
- g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA));
-
- if (g_desc_list == NULL) {
- AMAZON_DMA_EMSG("no memory for desriptor\n");
- return -ENOMEM;
- }
- memset(g_desc_list, 0, PAGE_SIZE);
- AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list);
- g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL);
- create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL);
- create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL);
- create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL);
-
- dma_chip_init();
- for (i = 0; i < (RX_CHAN_NUM + 1); i++) {
- rx_chan_list[i] = -1;
- }
- for (i = 0; i < (TX_CHAN_NUM + 1); i++) {
- tx_chan_list[i] = -1;
- }
-
- for (i = 0; i < CHAN_TOTAL_NUM; i++) {
- comb_isr_mask[i] = 0x80000000 >> (i);
- }
-
- g_log_chan[CHAN_TOTAL_NUM].weight = 0;
- printk("initialising dma core ... done\n");
-
- return 0;
-}
-
-arch_initcall(dma_init);
-
-
-void dma_cleanup(void)
-{
- dev_list *temp_dev;
-
- unregister_chrdev(DMA_MAJOR, "dma-core");
- for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) {
- kfree(temp_dev);
- }
- free_page(KSEG0ADDR((unsigned long) g_desc_list));
- remove_proc_entry("channel_weight", g_amazon_dma_dir);
- remove_proc_entry("dma_list", g_amazon_dma_dir);
- remove_proc_entry("dma_register", g_amazon_dma_dir);
- remove_proc_entry("amazon_dma", NULL);
- /* release the resources */
- free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt);
-}
-
-EXPORT_SYMBOL(dma_device_register);
-EXPORT_SYMBOL(dma_device_unregister);
-EXPORT_SYMBOL(dma_device_read);
-EXPORT_SYMBOL(dma_device_write);
-EXPORT_SYMBOL(dma_device_update);
-EXPORT_SYMBOL(dma_device_update_rx);
-
-MODULE_LICENSE("GPL");
diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.h b/target/linux/amazon/files/arch/mips/amazon/dma-core.h
deleted file mode 100644
index cb3d456c95..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/dma-core.h
+++ /dev/null
@@ -1,69 +0,0 @@
-#ifndef DMA_CORE_H
-#define DMA_CORE_H
-
-#define AMAZON_DMA_REG32(reg_num) *((volatile u32*)(reg_num))
-#define AMAZON_DMA_CH_STEP 4
-
-#define COMB_ISR_RX_MASK 0xfe000000
-#define COMB_ISR_TX_MASK 0x01f00000
-
-
-#define DMA_OWN 1
-#define CPU_OWN 0
-#define DMA_MAJOR 250
-
-//Descriptors
-#define DMA_DESC_OWN_CPU 0x0
-#define DMA_DESC_OWN_DMA 0x80000000
-#define DMA_DESC_CPT_SET 0x40000000
-#define DMA_DESC_SOP_SET 0x20000000
-#define DMA_DESC_EOP_SET 0x10000000
-
-#define switch_rx_chan_base 0
-#define switch_tx_chan_base 7
-#define switch2_rx_chan_base 2
-#define switch2_tx_chan_base 8
-#define TPE_rx_chan_base 4
-#define TPE_tx_chan_base 9
-#define DPLus2FPI_rx_chan_base 6
-#define DPLus2FPI_tx_chan_base 11
-
-#define RX_CHAN_NUM 7
-#define TX_CHAN_NUM 5
-#define CHAN_TOTAL_NUM (RX_CHAN_NUM+TX_CHAN_NUM)
-#define DEFAULT_OFFSET 20
-#define DESCRIPTOR_SIZE 8
-
-typedef struct dev_list{
- struct dma_device_info* dev;
- int weight;
- struct dev_list* prev;
- struct dev_list* next;
-}dev_list;
-
-typedef struct channel_info{
- char device_name[16];
- int occupied;
- enum attr_t attr;
- int current_desc;
- int weight;
- int default_weight;
- int desc_num;
- int burst_len;
- int desc_len;
- int desc_ofst;
- int packet_size;
- int offset_from_base;
- int control;
- void* opt[DEFAULT_OFFSET];
- u8* (*buffer_alloc)(int len,int* offset, void** opt);
- int (*buffer_free)(u8* dataptr,void* opt);
- int (*intr_handler)(struct dma_device_info* info,int status);
-
- struct dma_device_info* dma_dev;
-}channel_info;
-
-
-
-#endif
-
diff --git a/target/linux/amazon/files/arch/mips/amazon/interrupt.c b/target/linux/amazon/files/arch/mips/amazon/interrupt.c
deleted file mode 100644
index 05ff1ee75a..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/interrupt.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Gary Jennejohn (C) 2003 <gj@denx.de>
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the
- * AMAZON boards.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/bootinfo.h>
-#include <asm/irq_cpu.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-
-static void amazon_disable_irq(struct irq_data *d)
-{
- int i;
- u32 amazon_ier = AMAZON_ICU_IM0_IER;
- unsigned int irq_nr = d->irq;
-
- if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
- amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
- else {
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr <= 31)
- amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
- amazon_ier += 0x10;
- irq_nr -= 32;
- }
- }
-}
-
-static void amazon_mask_and_ack_irq(struct irq_data *d)
-{
- int i;
- u32 amazon_ier = AMAZON_ICU_IM0_IER;
- u32 amazon_isr = AMAZON_ICU_IM0_ISR;
- unsigned int irq_nr = d->irq;
-
- if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){
- amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier);
- amazon_writel(AMAZON_DMA_H_MASK, amazon_isr);
- } else {
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr <= 31){
- amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier);
- amazon_writel((1 << irq_nr ), amazon_isr);
- }
- amazon_ier += 0x10;
- amazon_isr += 0x10;
- irq_nr -= 32;
- }
- }
-}
-
-static void amazon_enable_irq(struct irq_data *d)
-{
- int i;
- u32 amazon_ier = AMAZON_ICU_IM0_IER;
- unsigned int irq_nr = d->irq;
-
- if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0)
- amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier);
- else {
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr <= 31)
- amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier);
- amazon_ier += 0x10;
- irq_nr -= 32;
- }
- }
-}
-
-static unsigned int amazon_startup_irq(struct irq_data *d)
-{
- amazon_enable_irq(d);
- return 0;
-}
-
-static struct irq_chip amazon_irq_type = {
- .name = "AMAZON",
- .irq_startup = amazon_startup_irq,
- .irq_enable = amazon_enable_irq,
- .irq_disable = amazon_disable_irq,
- .irq_unmask = amazon_enable_irq,
- .irq_ack = amazon_mask_and_ack_irq,
- .irq_mask = amazon_disable_irq,
- .irq_mask_ack = amazon_mask_and_ack_irq,
-};
-
-/* Cascaded interrupts from IM0-4 */
-static inline void amazon_hw_irqdispatch(u8 line)
-{
- u32 irq;
-
- irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK;
- if (line == 0 && irq <= 11 && irq >= 0) {
- //DMA fixed to IM0_IRL0
- irq = 0;
- }
- do_IRQ(irq + INT_NUM_IRQ0 + (line * 32));
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
- if (pending & CAUSEF_IP7){
- do_IRQ(MIPS_CPU_TIMER_IRQ);
- goto out;
- } else {
- unsigned int i;
- for (i = 0; i <= 4; i++)
- {
- if(pending & (CAUSEF_IP2 << i)){
- amazon_hw_irqdispatch(i);
- goto out;
- }
- }
- }
- printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
-out:
- return;
-}
-
-static struct irqaction cascade = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .name = "cascade",
-};
-
-void __init arch_init_irq(void)
-{
- int i;
-
- /* mask all interrupt sources */
- for(i = 0; i <= 4; i++){
- amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10));
- }
-
- mips_cpu_irq_init();
-
- /* set up irq cascade */
- for (i = 2; i <= 6; i++) {
- setup_irq(i, &cascade);
- }
-
- for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++)
- irq_set_chip_and_handler(i, &amazon_irq_type,
- handle_level_irq);
-
- set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-}
-
-void __cpuinit arch_fixup_c0_irqs(void)
-{
- /* FIXME: check for CPUID and only do fix for specific chips/versions */
- cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
- cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-}
diff --git a/target/linux/amazon/files/arch/mips/amazon/pci.c b/target/linux/amazon/files/arch/mips/amazon/pci.c
deleted file mode 100644
index 1b2afb9d4f..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/pci.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-/* FIXME: convert nasty volatile register derefs to readl/writel calls */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/paccess.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon.h>
-
-#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr))
-#ifndef AMAZON_PCI_MEM_BASE
-#define AMAZON_PCI_MEM_BASE 0xb2000000
-#endif
-#define AMAZON_PCI_MEM_SIZE 0x00400000
-#define AMAZON_PCI_IO_BASE 0xb2400000
-#define AMAZON_PCI_IO_SIZE 0x00200000
-
-#define AMAZON_PCI_CFG_BUSNUM_SHF 16
-#define AMAZON_PCI_CFG_DEVNUM_SHF 11
-#define AMAZON_PCI_CFG_FUNNUM_SHF 8
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-static struct resource pci_io_resource = {
- .name = "io pci IO space",
-#if 1
- .start = AMAZON_PCI_IO_BASE,
- .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1,
-#else
- .start = 0,
- .end = 0x00002000 - 1,
-#endif
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .name = "ext pci memory space",
- .start = AMAZON_PCI_MEM_BASE,
- .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-static int amazon_pci_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
-{
- unsigned long flags;
- u32 pci_addr;
- u32 val;
- int ret;
-
- /* Amazon support slot from 0 to 15 */
- /* devfn 0 & 0x20 is itself */
- if ((bus->number != 0) || (devfn > 0x7f) || (devfn == 0) || (devfn == 0x20))
- return 1;
-
- local_irq_save(flags);
-
- pci_addr = AMAZON_PCI_CFG_BASE |
- bus->number << AMAZON_PCI_CFG_BUSNUM_SHF |
- devfn << AMAZON_PCI_CFG_FUNNUM_SHF |
- (where & ~0x3);
-
- if (access_type == PCI_ACCESS_WRITE)
- {
-#ifdef CONFIG_SWAP_IO_SPACE
- val = swab32(*data);
-#endif
- ret = put_dbe(val, (u32 *)pci_addr);
- } else {
- ret = get_dbe(val, (u32 *)pci_addr);
-#ifdef CONFIG_SWAP_IO_SPACE
- *data = swab32(val);
-#else
- *data = val;
-#endif
- }
-
- amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
- amazon_writel(amazon_readl(STATUS_COMMAND_ADDR), STATUS_COMMAND_ADDR);
- amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
- mb();
- local_irq_restore(flags);
-
- if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
- return 1;
-
- return ret;
-}
-
-
-static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
- u32 data = 0;
-
- if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
- u32 data = 0;
-
- if (size == 4)
- {
- data = val;
- } else {
- if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops amazon_pci_ops = {
- amazon_pci_read,
- amazon_pci_write
-};
-
-static struct pci_controller amazon_pci_controller = {
- .pci_ops = &amazon_pci_ops,
- .mem_resource = &pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_resource = &pci_io_resource,
- .io_offset = 0x00000000UL,
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch (slot) {
- case 13:
- /* IDSEL = AD29 --> USB Host Controller */
- return INT_NUM_IM2_IRL15;
- case 14:
- /* IDSEL = AD30 --> mini PCI connector */
- return INT_NUM_IM2_IRL14;
- default:
- printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
- return 0;
- }
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- switch(dev->irq) {
- case INT_NUM_IM2_IRL15:
- /*
- * IDSEL = AD29 --> USB Host Controller
- * PCI_INTA/B/C--GPIO Port0.2--EXIN3
- * IN/ALT0:1 ALT1:0
- * PULL UP
- */
- (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb;
- (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4;
- (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb;
- (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4;
- (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4;
- //External Interrupt Node
- (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */
- (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- break;
- case INT_NUM_IM2_IRL14:
- /*
- * IDSEL = AD30 --> mini PCI connector
- * PCI_INTA--GPIO Port0.1--EXIN2
- * IN/ALT0:1 ALT1:0
- * PULL UP
- */
- (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd;
- (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2;
- (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd;
- (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2;
- (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2;
- //External Interrupt Node
- (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600;
- (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- break;
- default:
- return 1;
- }
- return 0;
-}
-
-int __init amazon_pci_init(void)
-{
- u32 temp_buffer;
-
-#ifdef CONFIG_SWAP_IO_SPACE
- AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28);
- wmb();
-#endif
-
- AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit);
- amazon_writel(amazon_readl(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
-
- AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT);
-
- temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR);
- temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT);
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS);
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS);
-
- /* flash */
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS);
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS);
-
- /* external master */
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS);
- temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS);
-
- AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer;
- wmb();
-
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000;
- AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000;
-
- AMAZON_PCI_REG32(BAR11_MASK) = 0x0c000008;
- AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0;
- AMAZON_PCI_REG32(BAR1_ADDR) = 0x0;
- amazon_writel(amazon_readl(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)), PCI_MODE);
- //use 8 dw burse length
- AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303;
-
- amazon_pci_controller.io_map_base = (unsigned long)ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE - 1);
- register_pci_controller(&amazon_pci_controller);
- return 0;
-}
-arch_initcall(amazon_pci_init);
diff --git a/target/linux/amazon/files/arch/mips/amazon/prom.c b/target/linux/amazon/files/arch/mips/amazon/prom.c
deleted file mode 100644
index 3095fd50ba..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/prom.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/model.h>
-#include <asm/cpu.h>
-
-void prom_putchar(char c)
-{
- /* Wait for FIFO to empty */
- while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ;
- /* Crude cr/nl handling is better than none */
- if(c == '\n')
- amazon_writel('\r', AMAZON_ASC_TBUF);
- amazon_writel(c, AMAZON_ASC_TBUF);
-}
-
-void __init prom_init(void)
-{
- char **envp = (char **) fw_arg2;
-
- int memsize = 16; /* assume 16M as default */
-
- envp = (char **)KSEG1ADDR((unsigned long)envp);
- while (*envp) {
- char *e = (char *)KSEG1ADDR(*envp);
-
- if (!strncmp(e, "memsize=", 8)) {
- e += 8;
- memsize = simple_strtoul(e, NULL, 10);
- }
- envp++;
- }
- memsize *= 1024 * 1024;
-
- strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2");
-
- add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-}
-
-void prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
- return BOARD_SYSTEM_TYPE;
-}
diff --git a/target/linux/amazon/files/arch/mips/amazon/setup.c b/target/linux/amazon/files/arch/mips/amazon/setup.c
deleted file mode 100644
index ff1a109d44..0000000000
--- a/target/linux/amazon/files/arch/mips/amazon/setup.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2004 Peng Liu <peng.liu@infineon.com>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/model.h>
-
-static unsigned int r4k_offset;
-static unsigned int r4k_cur;
-
-/* required in arch/mips/kernel/kspd.c */
-unsigned long cpu_khz;
-
-static void amazon_reboot_setup(void);
-
-/* the CPU clock rate - lifted from u-boot */
-unsigned int amazon_get_cpu_hz(void)
-{
- /*-----------------------------------*/
- /**CGU CPU Clock Reduction Register***/
- /*-----------------------------------*/
- switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){
- case 0:
- /*divider ration 1/1, 235 MHz clock */
- return 235000000;
- case 1:
- /*divider ration 2/3, 235 MHz clock, clock not accurate, here */
- return 150000000;
- case 2:
- /*divider ration 1/2, 235 MHz clock */
- return 117500000;
- default:
- /*divider ration 1/4, 235 MHz clock */
- return 58750000;
- }
-}
-
-/* the FPI clock rate - lifted from u-boot */
-unsigned int amazon_get_fpi_hz(void)
-{
- unsigned int clkCPU;
- clkCPU = amazon_get_cpu_hz();
-
- /*-------------------------------------*/
- /***CGU Clock Divider Select Register***/
- /*-------------------------------------*/
- switch (amazon_readl(AMAZON_CGU_DIV) & 0x3)
- {
- case 1:
- return clkCPU >> 1;
- case 2:
- return clkCPU >> 2;
- default:
- return clkCPU;
- /* '11' is reserved */
- }
-}
-EXPORT_SYMBOL(amazon_get_fpi_hz);
-
-/* this doesn't really belong here, but it's a convenient location */
-unsigned int amazon_get_cpu_ver(void)
-{
- static unsigned int cpu_ver = 0;
- if (cpu_ver == 0)
- cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000;
- return cpu_ver;
-}
-
-static inline u32 amazon_get_counter_resolution(void)
-{
- u32 res;
- __asm__ __volatile__(
- ".set push\n"
- ".set mips32r2\n"
- ".set noreorder\n"
- "rdhwr %0, $3\n"
- "ehb\n"
- ".set pop\n"
- : "=&r" (res)
- : /* no input */
- : "memory");
- instruction_hazard();
- return res;
-}
-
-void __init plat_time_init(void)
-{
- mips_hpt_frequency = amazon_get_cpu_hz() / amazon_get_counter_resolution();
- r4k_offset = mips_hpt_frequency / HZ;
- printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
- printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset);
-
- r4k_cur = (read_c0_count() + r4k_offset);
- write_c0_compare(r4k_cur);
-
- /* enable the timer in the PMU */
- amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR);
-
- /* setup the GPTU for timer tick f_fpi == f_gptu*/
- amazon_writel(0x0100, AMAZON_GPTU_CLC);
- amazon_writel(0xffff, AMAZON_GPTU_CAPREL);
- amazon_writel(0x80C0, AMAZON_GPTU_T6CON);
-}
-
-void __init plat_mem_setup(void)
-{
- u32 chipid = 0;
- u32 part_no = 0;
-
- chipid = amazon_readl(AMAZON_MCD_CHIPID);
- part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
-
- if(part_no == AMAZON_CHIPID_YANGTSE){
- printk("Yangtse Version\n");
- } else if (part_no == AMAZON_CHIPID_STANDARD) {
- printk(SYSTEM_MODEL_NAME "\n");
- } else {
- printk("unknown version %8x\n",part_no);
- }
-
- amazon_reboot_setup();
-
- //stop reset TPE and DFE
- amazon_writel(0, AMAZON_RST_REQ);
- //clock
- amazon_writel(0x3fff, AMAZON_PMU_PWDCR);
- //reenable trace capability
- part_no = readl(AMAZON_BCU_ECON);
-
- ioport_resource.start = IOPORT_RESOURCE_START;
- ioport_resource.end = IOPORT_RESOURCE_END;
- iomem_resource.start = IOMEM_RESOURCE_START;
- iomem_resource.end = IOMEM_RESOURCE_END;
-}
-
-static void amazon_machine_restart(char *command)
-{
- local_irq_disable();
- amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ);
- for (;;) ;
-}
-
-static void amazon_machine_halt(void)
-{
- printk(KERN_NOTICE "System halted.\n");
- local_irq_disable();
- for (;;) ;
-}
-
-static void amazon_machine_power_off(void)
-{
- printk(KERN_NOTICE "Please turn off the power now.\n");
- local_irq_disable();
- for (;;) ;
-}
-
-static void amazon_reboot_setup(void)
-{
- _machine_restart = amazon_machine_restart;
- _machine_halt = amazon_machine_halt;
- pm_power_off = amazon_machine_power_off;
-}
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h
deleted file mode 100644
index e72b7d5c11..0000000000
--- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/irq.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __AMAZON_IRQ_H
-#define __AMAZON_IRQ_H
-
-#define NR_IRQS 256
-#include_next <irq.h>
-
-#endif
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h
deleted file mode 100644
index af8c3e9394..0000000000
--- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/mangle-port.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003, 2004 Ralf Baechle
- */
-#ifndef __ASM_MACH_AMAZON_MANGLE_PORT_H
-#define __ASM_MACH_AMAZON_MANGLE_PORT_H
-
-#define __swizzle_addr_b(port) (port)
-#define __swizzle_addr_w(port) ((port) ^ 2)
-#define __swizzle_addr_l(port) (port)
-#define __swizzle_addr_q(port) (port)
-
-/*
- * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
- * less sane hardware forces software to fiddle with this...
- *
- * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
- * you can't have the numerical value of data and byte addresses within
- * multibyte quantities both preserved at the same time. Hence two
- * variations of functions: non-prefixed ones that preserve the value
- * and prefixed ones that preserve byte addresses. The latters are
- * typically used for moving raw data between a peripheral and memory (cf.
- * string I/O functions), hence the "__mem_" prefix.
- */
-#if defined(CONFIG_SWAP_IO_SPACE)
-
-# define ioswabb(a, x) (x)
-# define __mem_ioswabb(a, x) (x)
-# define ioswabw(a, x) le16_to_cpu(x)
-# define __mem_ioswabw(a, x) (x)
-# define ioswabl(a, x) le32_to_cpu(x)
-# define __mem_ioswabl(a, x) (x)
-# define ioswabq(a, x) le64_to_cpu(x)
-# define __mem_ioswabq(a, x) (x)
-
-#else
-
-# define ioswabb(a, x) (x)
-# define __mem_ioswabb(a, x) (x)
-# define ioswabw(a, x) (x)
-# define __mem_ioswabw(a, x) cpu_to_le16(x)
-# define ioswabl(a, x) (x)
-# define __mem_ioswabl(a, x) cpu_to_le32(x)
-# define ioswabq(a, x) (x)
-# define __mem_ioswabq(a, x) cpu_to_le32(x)
-
-#endif
-
-#endif /* __ASM_MACH_AMAZON_MANGLE_PORT_H */
diff --git a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h b/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h
deleted file mode 100644
index da42ee5a21..0000000000
--- a/target/linux/amazon/files/arch/mips/include/asm/mach-amazon/war.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#ifndef __ASM_MIPS_MACH_AMAZON_WAR_H
-#define __ASM_MIPS_MACH_AMAZON_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif
diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c
deleted file mode 100644
index b507494407..0000000000
--- a/target/linux/amazon/files/drivers/atm/amazon_tpe.c
+++ /dev/null
@@ -1,3074 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- * Driver for Infineon Amazon TPE
- */
-//-----------------------------------------------------------------------
-/* Author: peng.liu@infineon.com
- * Created: 12-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Last changed on: 13 Oct. 2004
- * Last changed by: peng.liu@infineon.com
- * Last changed on: 28 Jan. 2004
- * Last changed by: peng.liu@infineon.com
- * Last changed Reason:
- * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes)
- */
-// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
-// 507281:tc.chen 2005/07/28 fix f4 segment isssue
-/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */
-
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-
-/*TPE level loopback, bypass AWARE DFE */
-#undef TPE_LOOPBACK
-
-/* enable debug options */
-#undef AMAZON_ATM_DEBUG
-
-/* enable rx error packet analysis */
-#undef AMAZON_ATM_DEBUG_RX
-
-/* test AAL5 Interrupt */
-#undef AMAZON_TPE_TEST_AAL5_INT
-
-/* dump packet */
-#undef AMAZON_TPE_DUMP
-
-/* read ARC register*/
-/* this register is located in side DFE module*/
-#undef AMAZON_TPE_READ_ARC
-
-/* software controlled reassembly */
-#undef AMAZON_TPE_SCR
-
-/* recovery from AAL5 bug */
-#undef AMAZON_TPE_AAL5_RECOVERY
-
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-#define ALPHAEUS_BASE_ADDR 0x31c00
-#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04)
-#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c)
-#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30)
-#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90)
-#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0)
-#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8)
-#endif
-
-#include <linux/module.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/netdevice.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/bitops.h>
-#include <asm/system.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/in6.h>
-#include <linux/delay.h>
-#include <asm/amazon/atm_defines.h>
-#include <asm/amazon/amazon_dma.h>
-#include <asm/amazon/amazon_tpe.h>
-
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-#include <asm/amazon/amazon_mei.h>
-#include <asm/amazon/amazon_mei_app.h>
-#endif
-
-#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args)
-
-/***************************************** External Functions *******************************************/
-extern unsigned int amazon_get_fpi_hz(void);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-extern void amz_push_oam(unsigned char *);
-
-//amazon_mei.c
-#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
-extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-#endif
-
-/***************************************** Internal Functions *******************************************/
-int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data);
-/***************************************** Global Data *******************************************/
-amazon_atm_dev_t g_atm_dev; //device data
-static struct tq_struct swex_start_task; //BH task
-static struct tq_struct swex_complete_task; //BH task
-#ifdef AMAZON_TPE_SCR
-static struct tq_struct a5r_task; //BH task
-#endif
-static struct dma_device_info g_dma_dev; //for DMA
-static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM];
-static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM];
-static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells
-#ifdef AMAZON_CHECK_LINK
-static int adsl_link_status; //ADSL link status, 0:down, 1:up
-#endif //AMAZON_CHECK_LINK
-/***************************************** Module Parameters *************************************/
-// Parameter Definition for module
-static int port_enable0 = 1; // Variable for parameter port_enable0
-static int port_enable1 = 0; // Variable for parameter port_enable1
-static int port_max_conn0 = 15; // Variable for parameter port_max_conn0
-static int port_max_conn1 = 0; // Variable for parameter port_max_conn1
-static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0
-static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1
-
-
-static int qsb_tau = 1; // Variable for parameter qsb_tau
-static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm
-static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep
-
-static int cbm_nrt = 3900; // Variable for parameter cbm_nrt
-static int cbm_clp0 =3500; // Variable for parameter cbm_clp0
-static int cbm_clp1 =3200; // Variable for parameter cbm_clp1
-static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no
-
-static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~'
-static int a5s_mtu = 0x700; // mtu for tx
-static int a5r_mtu = 0x700; // mtu for rx
-
-static int oam_q_threshold = 64; // oam queue threshold, minium value 64
-static int rx_q_threshold = 1000; // rx queue threshold, minium value 64
-static int tx_q_threshold = 800; // tx queue threshold, minium value 64
-
-MODULE_PARM(port_max_conn0, "i");
-MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0");
-MODULE_PARM(port_max_conn1, "i");
-MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1");
-MODULE_PARM(port_enable0, "i");
-MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled");
-MODULE_PARM(port_enable1, "i");
-MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled");
-MODULE_PARM(port_cell_rate_up0, "i");
-MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s");
-MODULE_PARM(port_cell_rate_up1, "i");
-MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s");
-
-MODULE_PARM(qsb_tau,"i");
-MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0");
-MODULE_PARM(qsb_srvm, "i");
-MODULE_PARM_DESC(qsb_srvm, "Maximum burst size");
-MODULE_PARM(qsb_tstep, "i");
-MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4");
-
-MODULE_PARM(cbm_nrt, "i");
-MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer");
-MODULE_PARM(cbm_clp0, "i");
-MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0");
-MODULE_PARM(cbm_clp1, "i");
-MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1");
-MODULE_PARM(cbm_free_cell_no, "i");
-MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager");
-
-MODULE_PARM(a5_fill_pattern, "i");
-MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames");
-MODULE_PARM(a5s_mtu, "i");
-MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream");
-MODULE_PARM(a5r_mtu, "i");
-MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream");
-
-MODULE_PARM(oam_q_threshold, "i");
-MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold");
-
-MODULE_PARM(rx_q_threshold, "i");
-MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold");
-
-MODULE_PARM(tx_q_threshold, "i");
-MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold");
-
-/***************************************** local functions *************************************/
-/* Brief: valid QID
- * Return: 1 if valid
- * 0 if not
- */
-static inline int valid_qid(int qid)
-{
- return ( (qid>0) && (qid<AMAZON_ATM_MAX_QUEUE_NUM));
-}
-
-/*
- * Brief: align to 16 bytes boundary
- * Parameter:
- * skb
- * Description:
- * use skb_reserve to adjust the data pointer
- * don't change head pointer
- * pls allocate extrac 16 bytes before call this function
- */
-static void inline alloc_align_16(struct sk_buff * skb)
-{
- if ( ( ((u32) (skb->data)) & 15) != 0){
- AMAZON_TPE_DMSG("need to adjust the alignment manually\n");
- skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) );
- }
-
-}
-
-/*
- * Brief: initialize the device according to the module paramters
- * Return: not NULL - ok
- * NULL - fails
- * Description: arrange load parameters and call the hardware initialization routines
- */
-static void atm_init_parameters(amazon_atm_dev_t *dev)
-{
- //port setting
- dev->ports[0].enable = port_enable0;
- dev->ports[0].max_conn = port_max_conn0;
- dev->ports[0].tx_max_cr = port_cell_rate_up0;
- if (port_enable1){
- dev->ports[1].enable = port_enable1;
- dev->ports[1].max_conn = port_max_conn1;
- dev->ports[1].tx_max_cr = port_cell_rate_up1;
- }
-
- //aal5
- dev->aal5.padding_byte = a5_fill_pattern;
- dev->aal5.tx_max_sdu = a5s_mtu;
- dev->aal5.rx_max_sdu = a5r_mtu;
-
- //cbm
- dev->cbm.nrt_thr = cbm_nrt;
- dev->cbm.clp0_thr = cbm_clp0;
- dev->cbm.clp1_thr = cbm_clp1;
- dev->cbm.free_cell_cnt = cbm_free_cell_no;
-
- //qsb
- dev->qsb.tau = qsb_tau;
- dev->qsb.tstepc =qsb_tstep;
- dev->qsb.sbl = qsb_srvm;
-
- //allocate on the fly
- dev->cbm.mem_addr = NULL;
- dev->cbm.qd_addr = NULL;
-}
-
-
-/* Brief: Find QID for VCC
- * Parameters: vcc - VCC data structure
- * Return Value: -EINVAL - VCC not found
- * qid - QID for this VCC
- * Description:
- * This function returns the QID of a given VCC
- */
-static int amazon_atm_get_queue(struct atm_vcc* vcc)
-{
- int i;
- for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
- if (g_atm_dev.queues[i].vcc == vcc) return i;
- }
- return -EINVAL;
-}
-
-
-/*
- * Brief: Find QID for VPI/VCI
- * Parameters: vpi - VPI to found
- * vci - VCI to found
- *
- * Return Value: -EINVAL - VPI/VCI not found
- * qid - QID for this VPI/VCI
- *
- * Description:
- * This function returns the QID for a given VPI/VCI. itf doesn't matter
- */
-static int amazon_atm_find_vpivci(u8 vpi, u16 vci)
-{
- int i;
- struct atm_vcc * vcc;
- for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
- if ( (vcc = g_atm_dev.queues[i].vcc)!= NULL) {
- if ((vcc->vpi == vpi) && (vcc->vci == vci)) return i;
- }
- }
- return -EINVAL;
-}
-
-/* Brief: Find QID for VPI
- * Parameters: vpi - VPI to found
- * Return Value: -EINVAL - VPI not found
- * qid - QID for this VPI
- *
- * Description:
- * This function returns the QID for a given VPI. itf and VCI don't matter
- */
-static int amazon_atm_find_vpi(u8 vpi)
-{
- int i;
- for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
- if ( g_atm_dev.queues[i].vcc!= NULL) {
- if (g_atm_dev.queues[i].vcc->vpi == vpi) return i;
- }
- }
- return -EINVAL;
-}
-
-/*
- * Brief: Clears QID entries for VCC
- *
- * Parameters: vcc - VCC to found
- *
- * Description:
- * This function searches for the given VCC and sets it to NULL if found.
- */
-static inline void amazon_atm_clear_vcc(int i)
-{
- g_atm_dev.queues[i].vcc = NULL;
- g_atm_dev.queues[i].free = 1;
-}
-
-
-/*
- * Brief: dump skb data
- */
-static inline void dump_skb(u32 len, char * data)
-{
-#ifdef AMAZON_TPE_DUMP
- int i;
- for(i=0;i<len;i++){
- printk("%2.2x ",(u8)(data[i]));
- if (i % 16 == 15)
- printk("\n");
- }
- printk("\n");
-#endif
-}
-
-/*
- * Brief: dump queue descriptor
- */
-static inline void dump_qd(int qid)
-{
-#ifdef AMAZON_TPE_DUMP
- u8 * qd_addr;
- if (valid_qid(qid) != 1) return;
- qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
- AMAZON_TPE_EMSG("qid: %u [%8x][%8x][%8x][%8x]\n", qid
- ,readl(qd_addr+qid*CBM_QD_SIZE+0x0)
- ,readl(qd_addr+qid*CBM_QD_SIZE+0x4)
- ,readl(qd_addr+qid*CBM_QD_SIZE+0x8)
- ,readl(qd_addr+qid*CBM_QD_SIZE+0xc));
-#endif
-}
-
-/*
- * Brief: release TX skbuff
- */
-static inline void amazon_atm_free_tx_skb_vcc(struct atm_vcc *vcc, struct sk_buff *skb)
-{
- if ( vcc->pop != NULL) {
- vcc->pop(vcc, skb);
- } else {
- dev_kfree_skb_any(skb);
- }
-}
-/*
- * Brief: release TX skbuff
- */
-static inline void amazon_atm_free_tx_skb(struct sk_buff *skb)
-{
- struct atm_vcc* vcc = ATM_SKB(skb)->vcc;
- if (vcc!=NULL){
- amazon_atm_free_tx_skb_vcc(vcc,skb);
- } else {
- dev_kfree_skb_any(skb);//fchang:Added
- }
-}
-
-/* Brief: divide by 64 and round up
- */
-static inline u32 divide_by_64_round_up(int input)
-{
- u32 tmp1;
- tmp1 = (u32) input;
- tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64);
- if (tmp1 == 0) tmp1 = 1;
- return tmp1;
-}
-
-/*
- * Brief: statistics
- */
-#ifdef AMAZON_ATM_DEBUG
-static inline void queue_statics(int qid, qs_t idx)
-{
- if (valid_qid(qid)){
- g_atm_dev.queues[qid].qs[idx]++;
- }
-}
-#else //not AMAZON_ATM_DEBUG
-static inline void queue_statics(int qid, qs_t idx){}
-#endif //AMAZON_ATM_DEBUG
-
-
-/* Brief: set dma tx full, i.e. there is no available descriptors
- */
-static void inline atm_dma_full(void)
-{
- AMAZON_TPE_DMSG("ch0 is full\n");
- atomic_set(&g_atm_dev.dma_tx_free_0,0);
-}
-
-/*
- * Brief set dma tx free (at least one descript is available)
- */
-inline static void atm_dma_free(void)
-{
- AMAZON_TPE_DMSG("ch0 is free\n");
- atomic_set(&g_atm_dev.dma_tx_free_0,1);
-}
-
-
-/* Brief: return the status of DMA TX descriptors
- * Parameters: TX channel (DMA_TX_CH0, TX_CH1)
- * Return:
- * 1: there are availabel TX descriptors
- * 0: no available
- * Description:
- *
- */
-inline int dma_may_send(int ch)
-{
- if (atomic_read(&g_atm_dev.dma_tx_free_0)){
- return 1;
- }
- return 0;
-}
-
-/******************************* global functions *********************************/
-/*
- * Brief: SWIE Cell Extraction Start Routine
- * and task routine for swex_complete_task
- * Parameters: irq_stat - interrupt status
- *
- * Description:
- * This is the routine for extracting cell. It will schedule itself if the hardware is busy.
- * This routine runs in interrupt context
- */
-void amazon_atm_swex(void * irq_stat)
-{
- u32 ex_stat=0;
- u32 addr;
- // Read extraction status register
- ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-
- // Check if extraction/insertion is in progress
- if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) {
- AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
- swex_start_task.data = irq_stat;
- queue_task(&swex_start_task, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
- }else {
- // Extract QID
- g_atm_dev.swie.qid = (((u32)irq_stat) >> 24);
- AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid);
- //read status word
- addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
- addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0);
- addr = KSEG1ADDR(addr);
- g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK;
- AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw);
-
- // Start extraction
- AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR);
- AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR);
- }
-}
-#ifdef AMAZON_TPE_SCR
-u32 g_a5r_wait=0;
-/*
- * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task
- * Parameters: irq_stat - interrupt status
- *
- * Description:
- * This is the routine for extracting frame. It will schedule itself if the hardware is busy.
- * This routine runs in interrupt context
- */
-void amazon_atm_a5r(void* qid)
-{
- volatile u32 ex_stat=0;
- u32 addr;
- u32 a5r_wait=0;
-
- ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-#if 0
- // Check if extraction/insertion is in progress
- if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
- AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
- a5r_task.data = qid;
- queue_task(&a5r_task, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
- }else {
- AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid);
- // Start extraction
- AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
- AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
- }
-#else
- //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
- while ( ex_stat != 0x80){
- a5r_wait++;
- ex_stat = readl(CBM_HWEXSTAT0_ADDR);
-#if 0
- if (a5r_wait >= 0xffffff){
- a5r_wait=0;
- printk(".");
- }
-#endif
- }
- if (a5r_wait > g_a5r_wait){
- g_a5r_wait = a5r_wait;
- }
- AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
- AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
-#endif
-}
-
-#endif //AMAZON_TPE_SCR
-
-/* Brief: Handle F4/F5 OAM cell
- * Return:
- * 0 ok
- * <0 fails
- */
-static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status)
-{
- struct atm_vcc* vcc=NULL;
- int qid;
- if (!status&SWIE_EOAM_MASK){
- AMAZON_TPE_EMSG("unknown cell received, discarded\n");
- goto amazon_handle_oam_cell_err_exit;
- }else if (status&SWIE_ECRC10ERROR_MASK){
- AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status);
- goto amazon_handle_oam_cell_err_exit;
- }else{
- if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){
- //F4 level (VPI) OAM, Assume duplex
- qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET;
- }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){
- //F5 level (VCI) OAM, Assume duplex
- qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET;
- }else{
- qid = -1;
- AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n");
- goto amazon_handle_oam_cell_err_exit;
- }
- }
- if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){
- //TODO, should we do this for ALL OAM types? (Actually only User and CC)
- g_atm_dev.queues[qid].access_time=xtime;
- if (vcc->push_oam){
- (*vcc->push_oam)(vcc,data);
- }else{
- amz_push_oam(data);
- }
- }else{
- AMAZON_TPE_EMSG("no VCC yet\n");
- goto amazon_handle_oam_cell_err_exit;
- }
- return 0;
-amazon_handle_oam_cell_err_exit:
- dump_skb(AMAZON_AAL0_SDU,(char *)data);
- return -1;
-}
-
-/* Brief: SWIE Cell Extraction Finish Routine
- * and task routine for swex_complete_task
- * Description:
- * 1.Allocate a buffer of type struct sk_buff
- * 2.Copy the data from the temporary memory to this buffer
- * 3.Push the data to upper layer
- * 4.Update the statistical data if necessary
- * 5.Release the temporary data
-
- */
-void amazon_atm_swex_push(void * data)
-{
- struct atm_vcc* vcc=NULL;
- struct sk_buff* skb=NULL;
- struct amazon_atm_cell_header * cell_header;
- u32 status;
- int qid;
- if (!data){
- AMAZON_TPE_EMSG("data is NULL\n");
- return;
- }
- qid = ((u8*)data)[AMAZON_AAL0_SDU];
- status = ((u32*)data)[ATM_AAL0_SDU/4];
- cell_header = (struct amazon_atm_cell_header *) data;
- if (valid_qid(qid) != 1){
- AMAZON_TPE_EMSG("error qid: %u\n",qid);
- AMAZON_TPE_EMSG("unknown cells recieved\n");
- }else if (qid == AMAZON_ATM_OAM_Q_ID){
- //OAM or RM or OTHER cell
- //Find real connection
-
-#ifdef IKOS_MINI_BOOT
- //for OAM loop back test
- dump_skb(56,(char *)data);
- //kfree(data); using g_oam_cell
- return;
-#endif //IKOS_MINI_BOOT
-#ifdef TPE_LOOPBACK
- amz_push_oam(data);
- return;
-#endif//TPE_LOOPBACK
- int ret = 0;
- ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status);
- if (ret == 0)
- return;
- }else{
- //should be normal AAL0 cells
- // Get VCC
- vcc = g_atm_dev.queues[qid].vcc;
- if (vcc != NULL) {
- AMAZON_TPE_DMSG("push to upper layer\n");
- skb = dev_alloc_skb(AMAZON_AAL0_SDU);
- if (skb != NULL) {
- //skb->dev=vcc->dev;
- memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU);
- skb->stamp = xtime;
- ATM_SKB(skb)->vcc = vcc;
- (*g_atm_dev.queues[qid].push)(vcc,skb,0);
- }else{
- AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n");
- //inform the upper layer
- (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM);
- atomic_inc(&vcc->stats->rx_drop);
- }
- }else{
- AMAZON_TPE_EMSG("invalid qid %u\n",qid);
- }
- }
- //kfree(data); using g_oam_cell
-}
-
-/*
- * Brief: Interrupt handler for software cell extraction (done)
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- *
- * Description:
- * When a software extraction is finished this interrupt is issued.
- * It reads the cell data and sends it to the ATM stack.
- */
-void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs)
-{
- u32 * cell = NULL;
- int i;
- //ATM_AAL0 SDU + QID
- AMAZON_TPE_DMSG("SWIE extraction done\n");
- cell = (u32 *) g_oam_cell;
- if (cell != NULL){
- //convert to host byte order from big endian
- for(i=0;i<ATM_AAL0_SDU;i+=4){
- cell[i/4]=readl(SWIE_ECELL_ADDR+i);
- }
- cell[ATM_AAL0_SDU/4]= g_atm_dev.swie.sw;
- ((u8*)cell)[AMAZON_AAL0_SDU] = g_atm_dev.swie.qid;
-#ifdef IKOS_MINI_BOOT
- for(i=0;i<ATM_AAL0_SDU;i+=4){
- AMAZON_TPE_DMSG("[%2x][%2x][%2x][%2x]\n",
- ((char*)cell)[i],
- ((char*)cell)[i+1],
- ((char*)cell)[i+2],
- ((char*)cell)[i+3]
- );
- }
- AMAZON_TPE_DMSG("qid: %u\n", ((u8*)cell)[AMAZON_AAL0_SDU]);
- amazon_atm_swex_push((void *) cell);
-#else //not IKOS_MINI_BOOT
- swex_complete_task.data = cell;
- queue_task(&swex_complete_task,&tq_immediate);
- mark_bh(IMMEDIATE_BH);
-#endif //not IKOS_MINI_BOOT
- }else{
- AMAZON_TPE_EMSG("no memory for receiving AAL0 cell\n");
- }
-
- /* release the lock and check */
- if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
- AMAZON_TPE_EMSG("swie lock is already released\n");
- }
- wake_up(&g_atm_dev.swie.sleep);
-}
-/* Brief: Interrupt handler for software cell insertion
- *
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- *
- * Description:
- * When a software insertion is finished this interrupt is issued.
- * The only purpose is to release the semaphore and read the status register.
- */
-void amazon_atm_swin_isr(int irq, void *data, struct pt_regs *regs)
-{
- AMAZON_TPE_DMSG("SWIE insertion done\n");
- /* release the lock and check */
- if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
- AMAZON_TPE_EMSG("swie lock is already released");
- }
- // Release semaphore
- up(&g_atm_dev.swie.in_sem);
-
-}
-/* Brief: Interrupt handler for software cell insertion & extraction
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- * Description:
- * When a software insertion or extractionis finished this interrupt is issued.
- */
-void amazon_atm_swie_isr(int irq, void *data, struct pt_regs *regs)
-{
- u32 status=0;
- // Read status register
- status = readl(SWIE_ISTAT_ADDR);
- AMAZON_TPE_DMSG("insertion status: %8x\n", status);
- if (status & SWIE_ISTAT_DONE){
- //clear interrupt in peripheral and ICU
- AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
- mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
-
- amazon_atm_swin_isr(irq,data,regs);
- }
- status = readl(SWIE_ESTAT_ADDR);
- AMAZON_TPE_DMSG("extraction status: %8x\n", status);
- if (status & SWIE_ESTAT_DONE){
- //clear interrupt
- AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
- mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
-
- amazon_atm_swex_isr(irq,data,regs);
- }
- //clear interrupt in ICU
-}
-
-/*
- * Brief: Insert ATM cell into CBM
- * Parameters: queue - Target queue
- * cell - Pointer to cell data
- * Return Value: EBUSY - CBM is busy
- * 0 - OK, cell inserted
- * Description:
- * This function inserts a cell into the CBM using the software insertion
- * method. The format of the cell should be
- * Little Endian (address starting from 0)
- * H3, H2, H1, H0, P3, P2, P1, P0, P7, P6, P5, P4, ..., P47, P46, P45, P44
- * Big Endian (address starting from 0)
- * H0, H1, H2, H3, P0, P1, P2, P3, P4, P5, P6, P7, ..., P44, P45, P46, P47
- * This function does not free memory!!!
- */
-int amazon_atm_swin(u8 queue, void* cell)
-{
- u32 status=0;
- int i;
- // Read status register
- status = readl(SWIE_ISTAT_ADDR);
- AMAZON_TPE_DMSG(" SWIE status=0x%08x\n",status);
-
- AMAZON_TPE_DMSG(" Inserting cell qid=%u\n",queue);
-
-#ifdef AMAZON_CHECK_LINK
- if (adsl_link_status == 0){
- return -EFAULT;
- }
-#endif //AMAZON_CHECK_LINK
-
- // Get semaphore (if possible)
- if (down_interruptible(&g_atm_dev.swie.in_sem)) {
- return -ERESTARTSYS;
- }
- /* try to set lock */
- wait_event_interruptible(g_atm_dev.swie.sleep,(test_and_set_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0));
- if (signal_pending(current)){
- return -ERESTARTSYS;
- }
-
- // Store cell in CBM memory
- for(i=0;i<ATM_AAL0_SDU;i+=4){
- AMAZON_WRITE_REGISTER_L(((u32*)cell)[i/4],SWIE_ICELL_ADDR+i);
- }
- //Store queue id
- AMAZON_WRITE_REGISTER_L((u32) queue,SWIE_IQID_ADDR);
-
- //Start SWIE
- AMAZON_WRITE_REGISTER_L(SWIE_ICMD_START,SWIE_ICMD_ADDR);
-
- return 0;
-}
-
-#ifdef AMAZON_ATM_DEBUG
-/*
- * Brief: Interrupt handler for HTU
- *
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- *
- */
-void amazon_atm_htu_isr(int irq, void *data, struct pt_regs *regs)
-{
- u32 irq_stat=0;
-
- // Read interrupt status register
- irq_stat = readl(HTU_ISR0_ADDR);
- AMAZON_TPE_DMSG("HTU status: %8x\n",irq_stat);
- //Clear interrupt in CBM and ICU
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_HTU_INT, HTU_SRC0_ADDR);
- mask_and_ack_amazon_irq(AMAZON_HTU_INT);
- // Check if Any Cell Arrived
- if (irq_stat & (HTU_ISR_NE | HTU_ISR_PNE) ) {
- AMAZON_TPE_EMSG("INFNOENTRY %8x\n", readl(HTU_INFNOENTRY_ADDR));
- }else if (irq_stat & (HTU_ISR_TORD|HTU_ISR_PT)){
- AMAZON_TPE_EMSG("Time Out %8x\n", readl(HTU_INFTIMEOUT_ADDR));
- }else if (irq_stat & HTU_ISR_IT){
- AMAZON_TPE_EMSG("Interrupt Test\n");
- }else if (irq_stat & HTU_ISR_OTOC){
- AMAZON_TPE_EMSG("Overflow of Time Out Counter\n");
- }else if (irq_stat & HTU_ISR_ONEC){
- AMAZON_TPE_EMSG("Overflow of No Entry Counter\n");
- }else{
- AMAZON_TPE_EMSG("unknown HTU interrupt occurs %8x\n", irq_stat);
- }
-
-}
-#endif //AMAZON_ATM_DEBUG
-
-#ifdef AMAZON_TPE_TEST_AAL5_INT
-/*
- * Brief: Interrupt handler for AAL5
- *
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- *
- */
-void amazon_atm_aal5_isr(int irq, void *data, struct pt_regs *regs)
-{
- volatile u32 irq_stat=0;
-
- // Read interrupt status register
- irq_stat = readl(AAL5_SISR0_ADDR);
- if (irq_stat){
- AMAZON_TPE_EMSG("A5S status: %8x\n",irq_stat);
- //Clear interrupt in CBM and ICU
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_SSRC0_ADDR);
- mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
- }
- irq_stat = readl(AAL5_RISR0_ADDR);
- if (irq_stat){
- AMAZON_TPE_EMSG("A5R status: %8x\n",irq_stat);
- //Clear interrupt in CBM and ICU
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_RSRC0_ADDR);
- mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
- }
-}
-#endif //AMAZON_TPE_TEST_AAL5_INT
-
-/*
- * Brief: Interrupt handler for CBM
- *
- * Parameters: irq - CPPN for this interrupt
- * data - Device ID for this interrupt
- * regs - Register file
- *
- * Description:
- * This is the MIPS interrupt handler for the CBM. It processes incoming cells
- * for SWIE queues.
- */
-void amazon_atm_cbm_isr(int irq, void *data, struct pt_regs *regs)
-{
- u32 irq_stat=0;
- u8 qid=0;
-
- // Read interrupt status register
- while ( (irq_stat = readl(CBM_INTINF0_ADDR))){
- AMAZON_TPE_DMSG("CBM INT status: %8x\n",irq_stat);
- //Clear interrupt in CBM and ICU
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
- qid = (u8) ((irq_stat & CBM_INTINF0_QID_MASK)>>CBM_INTINF0_QID_SHIFT);
-#ifdef AMAZON_TPE_SCR
- if (irq_stat & CBM_INTINF0_EF){
- amazon_atm_a5r((void*)qid);
- }
-#endif
- // Check if Any Cell Arrived
- if (irq_stat & CBM_INTINF0_ACA) {
- amazon_atm_swex((void *)irq_stat);
- }
- //TX AAL5 PDU discard
- if (irq_stat & CBM_INTINF0_OPF){
- if ( (qid) < CBM_RX_OFFSET ){
- g_atm_dev.mib_counter.tx_drop++;
- }
- queue_statics(qid, QS_HW_DROP);
- }
- if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){
- AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat);
- if (irq_stat & CBM_INTINF0_ERR){
- AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n");
- }
- if (irq_stat & CBM_INTINF0_Q0E){
- AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
- }
- if (irq_stat & CBM_INTINF0_Q0I){
- AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
- }
- if (irq_stat & CBM_INTINF0_RDE){
- AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid);
- dump_qd(qid);
- }
- }
- }
- mask_and_ack_amazon_irq(AMAZON_CBM_INT);
-}
-
-/* Brief: check the status word after AAL SDU after reassembly
- */
-static inline void check_aal5_error(u8 stw0, u8 stw1, int qid)
-{
- if (stw0 & AAL5_STW0_MFL){
- AMAZON_TPE_DMSG("Maximum Frame Length\n");
- g_atm_dev.queues[qid].aal5VccOverSizedSDUs++;
- }
- if (stw0 & AAL5_STW0_CRC){
- AMAZON_TPE_DMSG("CRC\n");
- g_atm_dev.queues[qid].aal5VccCrcErrors++;
- }
-#ifdef AMAZON_ATM_DEBUG_RX
- AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1);
-#endif
-}
-
-/* Brief: Process DMA rx data
- * Parameters:
- dma_dev: pointer to the dma_device_info, provided by us when register the dma device
- * Return: no
- * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction.
- *
- */
-//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev)
-void __system atm_process_dma_rx(struct dma_device_info* dma_dev)
-{
- u8 * head=NULL;
- u32 length=0;
- u8 stw0=0;
- u8 stw1=0;
-
- struct sk_buff * skb=NULL;
- struct atm_vcc * vcc=NULL;
- int qid=0;
-#ifdef AMAZON_ATM_DEBUG_RX
- static int dma_rx_dump=0;
- static u32 seq=0;
-
- seq++;
- if (dma_rx_dump>0){
- printk("\n=========================[%u]=========================\n",seq);
- }
-#endif
- length=dma_device_read(dma_dev,&head,(void**)&skb);
- AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length);
- if (head == NULL||length<=0) {
- AMAZON_TPE_DMSG("dma_read null \n");
- goto error_exit;
- }
-
- if (length > (g_atm_dev.aal5.rx_max_sdu+64)){
- AMAZON_TPE_EMSG("received packet too large (%u)\n",length);
- goto error_exit;
- }
- //check AAL5R trail for error and qid
- //last byte is qid
- length--;
- qid = (int) head[length];
- AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid);
- //STW0 is always 4 bytes before qid
- length -= 4;
- stw0 = head[length]&0xff;
- AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0);
- //position of STW1 depends on the BE bits
- length = length-4 + (stw0&AAL5_STW0_BE);
- stw1 = head[length]&0xff;
- AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1);
- if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){
- //AAL5 Error
- check_aal5_error(stw0, stw1,qid);
- goto error_exit;
- }
- //make data pointers consistent
- //UU + CPI
- length -= 2;
- AMAZON_TPE_DMSG("packet length %u\n", length);
-
- //error: cannot restore the qid
- if (valid_qid(qid) != 1){
- AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid);
- goto error_exit;
- }
- vcc = g_atm_dev.queues[qid].vcc;
- if (vcc == NULL){
- AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid);
- goto error_exit;
- }
- if (skb == NULL){
- AMAZON_TPE_EMSG("cannot restore skb pointer!\n");
- goto error_exit;
- }
- skb_put(skb,length);
- skb->stamp = xtime;
- g_atm_dev.queues[qid].access_time=xtime;
- if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){
- g_atm_dev.mib_counter.rx_drop++;
- queue_statics(qid, QS_SW_DROP);
- }else{
- g_atm_dev.mib_counter.rx++;
- adsl_led_flash();//joelin adsl led
- queue_statics(qid, QS_PKT);
- AMAZON_TPE_DMSG("push successful!\n");
- }
-#ifdef AMAZON_ATM_DEBUG_RX
- if (dma_rx_dump>0){
- printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length);
- dump_skb(length+7, head);
- }
- if (dma_rx_dump >0) dma_rx_dump--;
-#endif
- return ;
-error_exit:
-#ifdef AMAZON_ATM_DEBUG_RX
- if ( (head!=NULL) && (length >0)){
- AMAZON_TPE_EMSG("length=%u\n",length);
- dump_skb(length+5, head);
- }
- dma_rx_dump++;
-#endif
- g_atm_dev.mib_counter.rx_err++;
- queue_statics(qid, QS_ERR);
- /*
- if (vcc){
- (*g_atm_dev.queues[qid].push)(vcc,skb,1);
- }
- */
- if (skb != NULL) {
- dev_kfree_skb_any(skb);
- }
- return;
-}
-
-/*Brief: ISR for DMA pseudo interrupt
- *Parameter:
- dma_dev: pointer to the dma_device_info, provided by us when register the dma device
- intr_status:
- RCV_INT: rx data available
- TX_BUF_FULL_INT: tx descriptor run out of
- TRANSMIT_CPT_INT: tx descriptor available again
- *Return:
- 0 for success???
- */
-//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
-int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
-{
- AMAZON_TPE_DMSG("status:%u\n",intr_status);
- switch (intr_status) {
- case RCV_INT:
- atm_process_dma_rx(dma_dev);
- break;
- case TX_BUF_FULL_INT:
- //TX full: no descriptors
- atm_dma_full();
- break;
- case TRANSMIT_CPT_INT:
- //TX free: at least one descriptor
- atm_dma_free();
- break;
- default:
- AMAZON_TPE_EMSG("unknown status!\n");
- }
- return 0;
-}
-
-/*Brief: free buffer for DMA tx
- *Parameter:
- dataptr: pointers to data buffer
- opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write
- *Return:
- 0 for success???
- *Description:
- called by DMA module to release data buffer after DMA tx transaction
- *Error:
- cannot restore skb pointer
- */
-int amazon_atm_free_tx(u8*dataptr, void* opt)
-{
- struct sk_buff *skb;
- if (opt){
- AMAZON_TPE_DMSG("free skb%8p\n",opt);
- skb = (struct sk_buff *)opt;
- amazon_atm_free_tx_skb(skb);
- }else{
- AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n");
- }
- return 0;
-}
-
-/*Brief: allocate buffer & do alignment
- */
-inline struct sk_buff * amazon_atm_alloc_buffer(int len)
-{
- struct sk_buff *skb;
- skb = dev_alloc_skb(len+16);
- if (skb){
- //alignment requriements (4x32 bits (16 bytes) boundary)
- alloc_align_16(skb);
- }
- return skb;
-}
-
-/*Brief: allocate buffer for DMA rx
- *Parameter:
- len: length
- opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler,
- *Return:
- pointer to buffer, NULL means error?
- *Description:
- must make sure byte alignment
- */
-
-u8* amazon_atm_alloc_rx(int len, int* offset, void **opt)
-{
- struct sk_buff *skb;
- *offset = 0;
- skb = amazon_atm_alloc_buffer(len);
- if (skb){
- AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len);
- *(struct sk_buff**)opt = skb;
- }else{
- AMAZON_TPE_DMSG("no memory for receiving atm frame!\n");
- return NULL;
- }
- return skb->data;
-}
-
-
-
-
-/* Brief: Allocate kernel memory for sending a datagram.
- * Parameters
- * vcc virtual connection
- * size data buffer size
- * Return:
- * NULL fail
- * sk_buff a pointer to a sk_buff
- * Description:
- * This function can allocate our own additional memory for AAL5S inbound
- * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c)
- * when we open the device.
- * byte alignment is done is DMA driver.
- */
-struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size)
-{
- struct sk_buff *skb;
-
- if (!dma_may_send(DMA_TX_CH0)){
- AMAZON_TPE_EMSG("no DMA descriptor available!\n");
- return NULL;
- }
- //AAL5 inbound header space + alignment extra buffer
- size+=8+AAL5S_INBOUND_HEADER;
-
- if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) {
- AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n",
- atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf);
- return NULL;
- }
-
- skb = amazon_atm_alloc_buffer(size);
- if (skb == NULL){
- AMAZON_TPE_EMSG("no memory\n");
- return NULL;
- }
- AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb);
- AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize);
- atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse);
-
- //reserve for AAL5 inbound header
- skb_reserve(skb,AAL5S_INBOUND_HEADER);
- return skb;
-}
-
-
-/* Brief: change per queue QSB setting according to vcc qos parameters
- * Paramters:
- * vcc: atm_vcc pointer
- * qid: CBM queue id (1~15)
- * Return:
- */
-static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid)
-{
- qsb_qptl_t qptl;
- qsb_qvpt_t qvpt;
- u32 tmp=0;
- unsigned int qsb_clk;
-
- qsb_clk = amazon_get_fpi_hz()>>1;
-
- AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n"
- ,qos->txtp.traffic_class
- ,qos->txtp.max_pcr
- ,qos->txtp.pcr
- ,qos->txtp.min_pcr
- ,qos->txtp.scr
- ,qos->txtp.mbs
- ,qos->txtp.cdv
- );
-
- // PCR limiter
- if (qos->txtp.max_pcr == 0){
- qptl.bit.tprs = 0; /* 0 disables the PCR limiter */
- }else {
- // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr
- tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1;
- // check if an overfow occured
- if (tmp > QSB_TP_TS_MAX) {
- AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp);
- qptl.bit.tprs = QSB_TP_TS_MAX;
- }else{
- qptl.bit.tprs = tmp;
- }
- }
- //WFQ
- if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){
- // real time queue gets weighted fair queueing bypass
- qptl.bit.twfq = 0;
- }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){
- // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates
- // wfq factor is maximum cell rate / garenteed cell rate.
- //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
- if (qos->txtp.min_pcr == 0) {
- AMAZON_TPE_EMSG("<warning> MIN_PCR should not be zero\n");
- qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
- }else{
- tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
- if (tmp == 0 ){
- qptl.bit.twfq = 1;
- }else if (tmp > QSB_WFQ_NONUBR_MAX){
- AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp);
- qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
- }else{
- qptl.bit.twfq = tmp;
- }
- }
- }else if (qos->txtp.traffic_class == ATM_UBR){
- // ubr bypass, twfq set to maximum value
- qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
- }else{
- //tx is diabled, treated as UBR
- AMAZON_TPE_EMSG("<warning> unsupported traffic class %u \n", qos->txtp.traffic_class);
- qos->txtp.traffic_class = ATM_UBR;
- qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
- }
-
- //SCR Leaky Bucket Shaper VBR.0/VBR.1
- if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){
- if (qos->txtp.scr == 0){
- //SCR == 0 disable the shaper
- qvpt.bit.ts = 0;
- qvpt.bit.taus = 0;
- }else{
- //CLP
- if (vcc->atm_options&ATM_ATMOPT_CLP){
- //CLP1
- qptl.bit.vbr = 1;
- }else{
- //CLP0
- qptl.bit.vbr = 0;
- }
- //TS and TauS
- tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1;
- if (tmp > QSB_TP_TS_MAX) {
- AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp);
- qvpt.bit.ts = QSB_TP_TS_MAX;
- }else{
- qvpt.bit.ts = tmp;
- }
- tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64;
- if (tmp > QSB_TAUS_MAX){
- AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp);
- qvpt.bit.taus = QSB_TAUS_MAX;
- }else if (tmp == 0){
- qvpt.bit.taus = 1;
- }else{
- qvpt.bit.taus = tmp;
- }
- }
- }else{
- qvpt.w0 = 0;
- }
- //write the QSB Queue Parameter Table (QPT)
- AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR);
- AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR);
- AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<<QSB_TABLESEL_SHIFT)
- | QSB_RAMAC_REG_LOW
- | QSB_WRITE
- | qid
- ,QSB_RAMAC_ADDR);
- //write the QSB Queue VBR Parameter Table (QVPT)
- AMAZON_WRITE_REGISTER_L(QSB_QVPT_SET_MASK,QSB_RTM_ADDR);
- AMAZON_WRITE_REGISTER_L(qvpt.w0, QSB_RTD_ADDR);
- AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QVPT<<QSB_TABLESEL_SHIFT)
- | QSB_RAMAC_REG_LOW
- | QSB_WRITE
- | qid
- ,QSB_RAMAC_ADDR);
- AMAZON_TPE_EMSG("tprs:%u twfq:%u ts:%u taus:%u\n",qptl.bit.tprs,qptl.bit.twfq,qvpt.bit.ts,qvpt.bit.taus);
-}
-
-/*
- * Brief: create/change CBM queue descriptor
- * Parameter:
- * vcc: atm_vcc pointer
- * qid: CBM queue id (1~15)
- */
-static inline void set_qd(struct atm_vcc *vcc, u32 qid)
-{
- u32 tx_config=0,rx_config=0;
- u32 itf = (u32) vcc->itf;
- u32 dma_qos=0;
- u8 * qd_addr=NULL;
-
- tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt;
- //RT: check if the connection is a real time connection
- if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){
- tx_config|= CBM_QD_W3_RT;
- }else{
- tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service
- }
- rx_config = tx_config;
-
- if(vcc->qos.aal == ATM_AAL5){
- //QoS: DMA QoS according to the traffic class
- switch (vcc->qos.txtp.traffic_class){
- case ATM_CBR: dma_qos = CBR_DMA_QOS;break;
- case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break;
- case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break;
- case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break;
- case ATM_UBR: dma_qos = UBR_DMA_QOS;break;
- }
-
- //TX: upstream, AAL5(EPD or PPD), NOINT, SBid
- tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
- //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR
-#ifdef AMAZON_TPE_SCR
- rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF;
-#else
- rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR;
-#endif
- }else {
- //should be AAL0
- //upstream, NOINT, SBid
- tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
- //RX: downstream, ACA interrupt,
- rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA;
- }
-
- //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells
- tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
- rx_config |= ( (divide_by_64_round_up(rx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
-
- qd_addr = (u8*) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
- //TX
- AMAZON_WRITE_REGISTER_L(tx_config, (qd_addr+qid*CBM_QD_SIZE + 0xc));
- AMAZON_WRITE_REGISTER_L(0, (qd_addr+qid*CBM_QD_SIZE + 0x8));
- //RX
- AMAZON_WRITE_REGISTER_L(rx_config, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0xc));
- AMAZON_WRITE_REGISTER_L(0, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0x8));
-}
-/*
- * Brief: add HTU table entry
- * Parameter:
- * vpi.vci:
- * qid: CBM queue id (DEST is qid + CBM_RX_OFFSET)
- * idx: entry id (starting from zero to 14)
- * Return:
- * 0: sucessful
- * EIO: HTU table entry cannot be written
- */
-
-inline int set_htu_entry(u8 vpi, u16 vci, u8 qid, u8 idx)
-{
- int i = 0;
- u32 tmp1=0;
- while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < 1024) i++;
- if (i > 1024)
- {
- AMAZON_TPE_EMSG("timeout\n");
- return -EIO;
- }
- // write address register,
- AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR);
- // configure transmit queue
- tmp1 = vpi<<24|vci<<8;
- tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!!
- |HTU_RAMDAT1_VCI3 // vci3 -> oam queue
- |HTU_RAMDAT1_VCI4 // vci4 -> oam queue
- |HTU_RAMDAT1_VCI6 // vci6 -> rm queue
- |HTU_RAMDAT1_PTI4 // pti4 -> oam queue
- |HTU_RAMDAT1_PTI5; // pti5 -> oam queue
-
- // ramdat 1 (in params & oam handling)
- AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR);
- // ramdat 2 (out params & oam handling)
- tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK)
- |HTU_RAMDAT2_PTI6
- |HTU_RAMDAT2_PTI7
- |HTU_RAMDAT2_F4U
- |HTU_RAMDAT2_F5U
- ;
- AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR);
- wmb();
- // write HTU entry
- AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR);
- return 0;
-}
-/*
- * Brief: add HTU table entry
- * Parameter:
- * vcc: atm_vcc pointer
- * qid: CBM queue id
- * Return:
- * 0: sucessful
- * EIO: HTU table entry cannot be written
- */
-inline static int set_htu(struct atm_vcc *vcc, u32 qid)
-{
- return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET));
-}
-
-/*
- * Brief: allocate a queue
- * Return:
- * <=0 no available queues
- * >0 qid
- */
-static int atm_allocate_q(short itf)
-{
- int i;
- u32 tmp1=0;
- int qid=0;
- amazon_atm_port_t * dev;
- dev = &g_atm_dev.ports[itf];
- //find start queue id for this interface
- for (i=0; i< itf; i++)
- {
- qid+= g_atm_dev.ports[i].max_conn;
- }
- // apply default queue offset ( oam, free cell queue, others, rm )
- qid += CBM_DEFAULT_Q_OFFSET;
- tmp1 = qid;
- // search for a free queue
- while ( (qid<tmp1+dev->max_conn)
- && ( g_atm_dev.queues[qid].free != 1)) {
- qid++;;
- }
- // if none was found, send failure message and return
- if ( tmp1+dev->max_conn == qid)
- {
- return -EFAULT;
- }
- return qid;
-
-}
-/* Brief: open a aal5 or aal0 connection
- */
-static int atm_open(struct atm_vcc *vcc, push_back_t push)
-{
- int err=0;
- int qid=0;
- amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf];
- unsigned long flags;
- /***************** check bandwidth ******************/
- /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */
- if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
- ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
- ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr)
- ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr)
- ) {
- AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr);
- return -EINVAL;
- }
- if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){
- AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid);
- return -EADDRINUSE;
- }
-
- /***************** allocate entry queueID for this port *****************/
- if ( (qid=atm_allocate_q(vcc->itf)) <= 0){
- AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid);
- AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf);
- return -EINVAL;
- }
- /**************QSB parameters and CBM descriptors*************/
- set_qsb(vcc, &vcc->qos, qid);
- set_qd(vcc, qid);
- mb();
- err=set_htu(vcc,qid);
- if (err){
- AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
- return err;
- }
- /************set internal mapping*************/
- local_irq_save(flags);
- g_atm_dev.queues[qid].free = 0;
- g_atm_dev.queues[qid].vcc = vcc;
- g_atm_dev.queues[qid].push = push;
- g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0;
- g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc;
- g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push;
- /******************reserve bandwidth**********************/
- if (vcc->qos.txtp.traffic_class == ATM_CBR){
- //CBR, real time connection, reserve PCR
- port->tx_cur_cr += vcc->qos.txtp.max_pcr;
- port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
- //VBR_RT, real time connection, reserve PCR
- port->tx_cur_cr += vcc->qos.txtp.max_pcr;
- port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
- //VBR_NRT, reserve SCR
- port->tx_cur_cr += vcc->qos.txtp.pcr;
- port->tx_rem_cr -= vcc->qos.txtp.pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
- //UBR_PLUS, reserve MCR
- port->tx_cur_cr += vcc->qos.txtp.min_pcr;
- port->tx_rem_cr -= vcc->qos.txtp.min_pcr;
- }
- local_irq_restore(flags);
- return err;
-}
-/* Brief: Open ATM connection
- * Parameters: atm_vcc - Pointer to VCC data structure
- * vpi - VPI value for new connection
- * vci - VCI value for new connection
- *
- * Return: 0 - sucessful
- * -ENOMEM - No memory available
- * -EINVAL - No bandwidth/queue/ or unsupported AAL type
- * Description:
- * This function opens an ATM connection on a specific device/interface
- *
- */
-int amazon_atm_open(struct atm_vcc *vcc,push_back_t push)
-{
- int err=0;
-
- AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n"
- ,vcc->vpi
- ,vcc->vci
- ,vcc->itf
- ,vcc->qos.aal
- );
-
- AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n"
- ,vcc->qos.txtp.traffic_class
- ,vcc->qos.txtp.max_pcr
- ,vcc->qos.txtp.max_sdu
- );
- AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n"
- ,vcc->qos.rxtp.traffic_class
- ,vcc->qos.rxtp.max_pcr
- ,vcc->qos.rxtp.max_sdu
- );
- if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){
- err = atm_open(vcc,push);
- }else{
- AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal);
- err = -EPROTONOSUPPORT;
- };
- if (err == 0 ){
- //replace the default memory allocation function with our own
- vcc->alloc_tx = amazon_atm_alloc_tx;
- set_bit(ATM_VF_READY,&vcc->flags);
- }
- return err;
-}
-
-/* Brief: Send ATM OAM cell
- * Parameters: atm_vcc - Pointer to VCC data structure
- * skb - Pointer to sk_buff structure, that contains the data
- * Return: 0 - sucessful
- * -ENOMEM - No memory available
- * -EINVAL - Not supported
- * Description:
- * This function sends a cell over and ATM connection
- * We always release the skb
- * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE)
- */
-int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags)
-{
- int err=0;
- int qid=0;
- struct amazon_atm_cell_header * cell_header;
- // Get cell header
- cell_header = (struct amazon_atm_cell_header*) cell;
- if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) {
- qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci);
- }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) {
- //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi);
- // 507281:tc.chen start
- u8 f4_vpi;
- f4_vpi = cell_header->bit.vpi;
- qid = amazon_atm_find_vpi(f4_vpi );
- // 507281:tc.chen end
- }else{
- //non-OAM cells, always invalid
- qid = -EINVAL;
- }
- if (qid == -EINVAL) {
- err = -EINVAL;
- AMAZON_TPE_EMSG("not valid AAL0 packet\n");
- }else{
- //send the cell using swie
-#ifdef TPE_LOOPBACK
- err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell);
-#else
- err = amazon_atm_swin(qid, cell);
-#endif
- }
- //kfree(cell);
- return err;
-}
-
-/* Brief: Send AAL5 frame through DMA
- * Parameters: vpi - virtual path id
- * vci - virtual circuit id
- * clp - cell loss priority
- * qid - CBM queue to be sent to
- * skb - packet to be sent
- * Return: 0 - sucessful
- * -ENOMEM - No memory available
- * -EINVAL - Not supported
- * Description:
- * This function sends a AAL5 frame over and ATM connection
- * 1. make sure that the data is aligned to 4x32-bit boundary
- * 2. provide the inbound data (CPCS-UU and CPI, not used here)
- * 3. set CLPn
- * 4. send the frame by DMA
- * 5. release the buffer ???
- ** use our own allocation alloc_tx
- ** we make sure the alignment and additional memory
- *** we always release the skb
-
- */
-int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb)
-{
- int err=0,need_pop=1;
- u32 * data=NULL;
- int nwrite=0;
- struct sk_buff *skb_tmp;
- u32 len=skb->len;
-
- //AAL5S inbound header 8 bytes
- if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) {
- AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu);
- AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len);
- err = -EMSGSIZE;
- goto atm_dma_tx_error_exit;
- }
-
- //Check the byte alignment requirement and header space
- if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)<AAL5S_INBOUND_HEADER)){
- //not aligned or no space for header, fall back to memcpy
- skb_tmp = dev_alloc_skb(skb->len+16);
- if (skb_tmp==NULL){
- err = - ENOMEM;
- goto atm_dma_tx_error_exit;
- }
- alloc_align_16(skb_tmp);
- g_atm_dev.aal5.cnt_cpy++;
- skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER);
- memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len);
- amazon_atm_free_tx_skb(skb);
- need_pop=0;
- skb = skb_tmp;
- }
- //Provide AAL5S inbound header
- data = (u32 *)skb_push(skb,8);
- data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp);
- data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid);
-
- len = skb->len;
-
- //send through DMA
- AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]);
- AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]);
- AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len);
- nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb);
- if (nwrite != len) {
- //DMA descriptors full
-// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
- AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
- err = -EAGAIN;
- goto atm_dma_tx_drop_exit;
- }
- AMAZON_TPE_DMSG("just finish call dma_write\n");
- //release in the "dma done" call-back
- return 0;
-atm_dma_tx_error_exit:
- g_atm_dev.mib_counter.tx_err++;
- queue_statics(qid, QS_ERR);
- goto atm_dma_tx_exit;
-
-atm_dma_tx_drop_exit:
- g_atm_dev.mib_counter.tx_drop++;
- queue_statics(qid, QS_SW_DROP);
-atm_dma_tx_exit:
- if (need_pop){
- amazon_atm_free_tx_skb(skb);
- }else{
- dev_kfree_skb_any(skb);
- }
- return err;
-}
-
-/* Brief: Send AAL0/AAL5 packet
- * Parameters: atm_vcc - Pointer to VCC data structure
- * skb - Pointer to sk_buff structure, that contains the data
- * Return: 0 - sucessful
- * -ENOMEM - No memory available
- * -EINVAL - Not supported
- * Description:
- * See amazon_atm_dma_tx
- */
-int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb)
-{
- int qid=0;
- u8 clp=0;
- int err=0;
- u32 wm=0;
-
- if (vcc == NULL || skb == NULL){
- AMAZON_TPE_EMSG("invalid parameter\n");
- return -EINVAL;
- }
- ATM_SKB(skb)->vcc = vcc;
- qid = amazon_atm_get_queue(vcc);
- if (valid_qid(qid) != 1) {
- AMAZON_TPE_EMSG("invalid vcc!\n");
- err = -EINVAL;
- goto atm_send_err_exit;
- }
-
- //Send AAL0 using SWIN
- if (vcc->qos.aal == ATM_AAL0){
-#ifdef TPE_LOOPBACK
- err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data);
-#else
- err=amazon_atm_swin(qid, skb->data);
-#endif
- if (err){
- goto atm_send_err_exit;
- }
- goto atm_send_exit;
- }
-
- //Should be AAl5
- //MIB counter
- g_atm_dev.mib_counter.tx++;
- adsl_led_flash();//joelin adsl led
- queue_statics(qid, QS_PKT);
-
-#ifdef AMAZON_CHECK_LINK
- //check adsl link
- if (adsl_link_status == 0){
- //link down
- AMAZON_TPE_DMSG("ADSL link down, discarded!\n");
- err=-EFAULT;
- goto atm_send_drop_exit;
- }
-#endif
- clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0;
- //check watermark first
- wm = readl(CBM_WMSTAT0_ADDR);
- if ( (wm & (1<<qid))
- ||( (vcc->qos.txtp.traffic_class != ATM_CBR
- &&vcc->qos.txtp.traffic_class != ATM_VBR_RT)
- &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){
- //wm hit: discard
- AMAZON_TPE_DMSG("watermark hit, discarded!\n");
- err=-EFAULT;
- goto atm_send_drop_exit;
- }
-#ifdef TPE_LOOPBACK
- return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb);
-#else
- return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb);
-#endif
-
-atm_send_exit:
- amazon_atm_free_tx_skb_vcc(vcc,skb);
- return 0;
-
-atm_send_drop_exit:
- g_atm_dev.mib_counter.tx_drop++;
- queue_statics(qid,QS_SW_DROP);
-atm_send_err_exit:
- amazon_atm_free_tx_skb_vcc(vcc,skb);
- return err;
-}
-
-/* Brief: Return ATM port related MIB
- * Parameter: interface number
- atm_cell_ifEntry_t
- */
-int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf)
-{
- g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP);
- to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp;
-#ifdef AMAZON_TPE_READ_ARC
- u32 reg_val=0;
- meiDebugRead((AR_CELL0_ADDR+itf*4),&reg_val,1);
- g_atm_dev.mib_counter.rx_cells += reg_val;
- reg_val=0;
- meiDebugWrite((AR_CELL0_ADDR+itf*4),&reg_val,1);
- to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32;
- to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
-
- meiDebugRead((AT_CELL0_ADDR+itf*4),&reg_val,1);
- g_atm_dev.mib_counter.tx_cells += reg_val;
- reg_val=0;
- meiDebugWrite((AT_CELL0_ADDR+itf*4),&reg_val,1);
- to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32;
- to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
-
- meiDebugRead((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
- g_atm_dev.mib_counter.rx_err_cells += reg_val;
- reg_val=0;
- meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
- to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells;
-
- to->ifOutErrors = 0;
-#else
- to->ifHCInOctets_h = 0;
- to->ifHCInOctets_l = 0;
- to->ifHCOutOctets_h = 0;
- to->ifHCOutOctets_l = 0;
- to->ifInErrors = 0;
- to->ifOutErrors = 0;
-#endif
- return 0;
-}
-
-/* Brief: Return ATM AAL5 related MIB
- * Parameter:
- atm_aal5_ifEntry_t
- */
-int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to)
-{
- u32 reg_l,reg_h;
- //AAL5R received Octets from ATM
- reg_l = readl(AAL5_RIOL_ADDR);
- reg_h = readl(AAL5_RIOM_ADDR);
- g_atm_dev.mib_counter.rx_cnt_h +=reg_h;
- if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){
- g_atm_dev.mib_counter.rx_cnt_h++;
- }
-
- g_atm_dev.mib_counter.rx_cnt_l+= reg_l;
- //AAL5S sent Octets to ATM
- reg_l = readl(AAL5_SOOL_ADDR);
- reg_h = readl(AAL5_SOOM_ADDR);
- g_atm_dev.mib_counter.tx_cnt_h +=reg_h;
- if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){
- g_atm_dev.mib_counter.tx_cnt_h++;
- }
- g_atm_dev.mib_counter.tx_cnt_l+= reg_l;
-
-
- g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR);
- g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR);
-
- //store
- to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h;
- to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l;
- to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h;
- to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l;
- to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop;
- to->ifInDiscards = g_atm_dev.mib_counter.rx_drop;
-
- //Software provided counters
- //packets passed to higher layer
- to->ifInUcastPkts = g_atm_dev.mib_counter.rx;
- //packets passed from higher layer
- to->ifOutUcastPkts = g_atm_dev.mib_counter.tx;
- //number of wrong downstream packets
- to->ifInErrors = g_atm_dev.mib_counter.rx_err;
- //number of wrong upstream packets
- to->ifOutErros = g_atm_dev.mib_counter.tx_err;
-
- return 0;
-}
-/* Brief: Return ATM AAL5 VCC related MIB from internale use
- * Parameter:
- * qid
- * atm_aal5_vcc_t
- */
-static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to)
-{
- //aal5VccCrcErrors
- to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors;
- to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs;
- to->aal5VccSarTimeOuts = 0; //not supported yet
- return 0;
-}
-/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci
- * Parameter: atm_vcc
- * atm_aal5_vcc_t
- */
-int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to)
-{
- int qid=0;
- int err=0;
- qid = amazon_atm_find_vpivci(vpi, vci);
- if (qid >0 ){
- err = __amazon_atm_vcc_mib(qid,to);
- }else{
- return -EINVAL;
- }
- return err;
-}
-
-
-/* Brief: Return ATM AAL5 VCC related MIB
- * Parameter: atm_vcc
- * atm_aal5_vcc_t
- */
-int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to)
-{
- int qid=0;
- int err=0;
- qid = amazon_atm_get_queue(vcc);
- if (qid >0 ){
- err = __amazon_atm_vcc_mib(qid,to);
- }else{
- return -EINVAL;
- }
- return err;
-}
-
-/* Brief: Close ATM connection
- * Parameters: atm_vcc - Pointer to VCC data structure
- * Return: no
- * Description:
- * This function closes the given ATM connection
- */
-void amazon_atm_close(struct atm_vcc *vcc){
- int i;
- int qid=0;
- u32 tmp1;
- u8 * qd_addr;
- unsigned long flags;
- if (vcc == NULL){
- AMAZON_TPE_EMSG("invalid parameter. vcc is null\n");
- return;
- }
- u32 itf = (u32) vcc->itf;
- //release bandwidth
- if (vcc->qos.txtp.traffic_class == ATM_CBR){
- g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
- g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
- g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
- g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
- g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr;
- g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr;
- }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
- g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr;
- g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr;
- }
-
- qid = amazon_atm_get_queue(vcc);
- if (qid == -EINVAL){
- AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci);
- return;
- }
- local_irq_save(flags);
- //Disable HTU entry
- i=0;
- while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++;
- if (i == HTU_RAM_ACCESS_MAX){
- AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n");
- }
-
- // write address register
- AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR);
- // invalidate the connection
- AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR);
- // write command
- AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR);
-
- qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
-#ifdef AMAZON_ATM_DEBUG
- tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff;
- AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1);
- tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff;
- AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1);
-#endif
- // set threshold of txqueue to 0
- tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c);
- tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
- AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c));
- // set threshold of rxqueue to 0
- tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c);
- tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
- AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c));
-
- //clear internal mapping
- amazon_atm_clear_vcc(qid);
- amazon_atm_clear_vcc(qid+CBM_RX_OFFSET);
-
- local_irq_restore(flags);
-}
-
-
-/* Brief: initialize internal data structure
- */
-static void atm_constructor(amazon_atm_dev_t * dev)
-{
- int i;
- memset(dev,0,sizeof(amazon_atm_dev_t));
- atm_init_parameters(dev);
- //internal: queue "free" flag
- for(i=1;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
- //dev->queues[i].vcc=NULL;
- dev->queues[i].free = 1;
- }
- for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
- dev->ports[i].tx_rem_cr = dev->ports[i].tx_max_cr;
- }
- //MIB
- atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors
-}
-
-/* Brief: return round up base-2 logarithm
- */
-static inline int get_log_2(u32 value)
-{
- int i=0,j=1;
- while (i<11){
- if (j>=value) break;
- j=j<<1;
- i++;
- }
- AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i);
- return i;
-}
-
-/* Brief: TPE hardware initialization
- * Parameter: specifiy the configurations of the hardware
- */
-static inline int atm_init_hard(amazon_atm_dev_t * dev)
-{
- int i;
- u32 tmp1, tmp2, tmp3;
- u8 * mem_addr=NULL;
- u8 * qd_addr=NULL;
- //PMU power on the module 1st
- *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE);
- //Reset the module
- *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE);
- mb();
- mdelay(100);
- *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE));
- mb();
-
- unsigned long qsb_clk = amazon_get_fpi_hz()>>1;
- /*********allocate & arrange memory for CBM *********/
- if (dev->cbm.mem_addr == NULL){
- dev->cbm.allocated = 1;
- mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
- if (mem_addr != NULL){
- dev->cbm.mem_addr = mem_addr;
- } else {
- goto init_no_mem;
- }
- }
- if (dev->cbm.qd_addr == NULL){
-#ifdef CONFIG_USE_VENUS
- //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004
- //thus, we allocate 64k memory
- qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4);
- if (qd_addr != NULL) {
- dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr));
- dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000);
- }else{
- goto init_no_mem;
- }
-#else //CONFIG_USE_VENUS
- qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL);
- if (qd_addr != NULL) {
- dev->cbm.qd_addr = qd_addr;
- }else {
- goto init_no_mem;
- }
-#endif //CONFIG_USE_VENUS
- }
-//#ifndef CONFIG_MIPS_UNCACHED
- mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr);
- qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr);
-//#endif
- //CBM reset cell queue memory, 64 bytes / cell
- memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt);
- //make a link list, last 4 bytes is pointer
- for(i=1;i<dev->cbm.free_cell_cnt;i++){
- AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c));
- }
- //reset queue descriptor
- memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM);
- //init word 0-2 of q0 (free cell list)
- //address of last cell
- AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr);
- //address of first cell
- AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4));
- //no. of free cells
- AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8));
- //init q descriptor for OAM receiving
- AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
-// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
- //config CBM
- //set offset address and threshold
- AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR);
- AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR);
- AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR);
- AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR);
- //config interrupts
- AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR
-#ifdef AMAZON_ATM_DEBUG
- |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR
-#endif
-#ifdef AMAZON_TPE_SCR
- |CBM_IMR_EF
-#endif
- )), CBM_IMR0_ADDR);
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
-
- //HTU
- //RAM entry for number of possible connections per interface
- tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0;
- AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR);
- for(i=1;i<AMAZON_ATM_PORT_NUM;i++){
- tmp1+=dev->ports[i].max_conn;
- AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i);
- }
- dev->cbm.max_q_off = tmp1+1;
- //Queue ID for OAM/RM/Other cells
- AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR);
- AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR);
- AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR);
- //Timeout
- AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR);
-#ifdef AMAZON_ATM_DEBUG
- AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK
- &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR);
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR);
-#endif
- //QSB
- //global setting, TstepC, SBL, Tau
- //Tau
- AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR);
- //SBL
- AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR);
- //tstep
- AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR);
-
- //port settting
- for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
- if ( (dev->ports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){
- tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr;
- tmp2 = tmp1 / 64; //integer value of Tsb
- tmp3 = tmp1%64 + 1; //fractional part of Tsb
- //carry over to integer part (?)
- if (tmp3 == 64) {
- tmp3 = 0;
- tmp2++;
- }
- if (tmp2 == 0){
- tmp2 = 1;
- tmp3 = 1;
- }
- //1. set mask 2. write value to data transfer register 3. start the transfer
- //SCT(FracRate)
- AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR);
- AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR);
- AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
- //SPT(SBV + PN + IntRage)
- AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_MASK, QSB_RTM_ADDR);
- AMAZON_WRITE_REGISTER_L(QSB_SPT_SBVALID|tmp2|(i<<16),QSB_RTD_ADDR);
- AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
-
-
- }
- }
-
- //SWIE: Setup Service Request Control Registers to enable interrupts
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
-
- wmb();
-#ifdef AMAZON_TPE_TEST_AAL5_INT
- AMAZON_WRITE_REGISTER_L(AAL5R_ISR_FE,AAL5_RIMR0_ADDR);
- AMAZON_WRITE_REGISTER_L(0, AAL5_SIMR0_ADDR);
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_SSRC0_ADDR);
- AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_RSRC0_ADDR);
-#endif //AMAZON_TPE_TEST_AAL5_INT
-
- AMAZON_WRITE_REGISTER_L(dev->aal5.tx_max_sdu,AAL5_SMFL_ADDR);
- AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR);
- AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode
- |AAL5_SCMD_SS
- |AAL5_SCMD_AR
- ,AAL5_SCMD_ADDR);
- //start CBM
- AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
- wmb();
- return 0;
-init_no_mem:
- if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
-
-#ifdef CONFIG_USE_VENUS
- //to work around a bug, bit15 of QDOFF address should be 1
- if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4);
-#else //CONFIG_USE_VENUS
- if (qd_addr != NULL) kfree(qd_addr);
-#endif //CONFIG_USE_VENUS
- return -ENOMEM;
-}
-
-/*
- * Brief: Create entry in /proc for status information
- */
-void atm_create_proc(void)
-{
- create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM);
- create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB);
- create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC);
-#if 0
- create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5);
- create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM);
- create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU);
- create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB);
- create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE);
-#endif
-}
-
-/*
- * Brief: Delete entry in /proc for status information
- */
-void atm_delete_proc(void)
-{
- remove_proc_entry("amazon_atm", NULL);
- remove_proc_entry("amazon_atm_mib", NULL);
- remove_proc_entry("amazon_atm_vcc", NULL);
-#if 0
- remove_proc_entry("amazon_atm_aal5", NULL);
- remove_proc_entry("amazon_atm_cbm", NULL);
- remove_proc_entry("amazon_atm_htu", NULL);
- remove_proc_entry("amazon_atm_qsb", NULL);
- remove_proc_entry("amazon_atm_swie", NULL);
-#endif
-}
-/* Brief: Initialize ATM module
- * Parameters: no
- * Return: &g_atm_dev - sucessful
- * NULL - fails:
- * 1. invalid parameter
- * 2. No memory available
- * Description:
- * This function configure the TPE components according to the input info,
- * -CBM
- * -HTU
- * -QSB
- * -AAL5
- *
- */
-amazon_atm_dev_t * amazon_atm_create(void)
-{
- int i;
- AMAZON_TPE_DMSG("atm_init\n");
- /************initialize global data structure****************/
- atm_constructor(&g_atm_dev);
- /***********allocate kernel resources****************/
- //bottom halfs for SWEX
- swex_start_task.routine = amazon_atm_swex;
- swex_start_task.data = NULL;
- swex_complete_task.routine = amazon_atm_swex_push;
- swex_complete_task.data = NULL;
-#ifdef AMAZON_TPE_SCR
- a5r_task.routine = amazon_atm_a5r;
- a5r_task.data = NULL;
-#endif //AMAZON_TPE_SCR
- //SWIN semaphore
- sema_init(&(g_atm_dev.swie.in_sem), 1);
- //SWIE lock
- clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
- //SWIE wait queue
- init_waitqueue_head(&(g_atm_dev.swie.sleep));
- atm_create_proc();
-
- //register DMA
- memset(&g_dma_dev,0,sizeof(struct dma_device_info));
- strcpy(g_dma_dev.device_name,"TPE");
- g_dma_dev.weight=1;
- g_dma_dev.num_tx_chan=2;
- g_dma_dev.num_rx_chan=2;
- g_dma_dev.ack=1;
- g_dma_dev.tx_burst_len=4;
- g_dma_dev.rx_burst_len=4;
- //DMA TX
-
- for(i=0;i<1;i++){
- g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT;
- g_dma_dev.tx_chan[i].desc_num=10;
- g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER;
- g_dma_dev.tx_chan[i].control=1;
- }
- //DMA RX
- for(i=0;i<2;i++){
- g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT;
- /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */
- g_dma_dev.rx_chan[i].desc_num=10;
- g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf);
- g_dma_dev.rx_chan[i].control=1;
- }
- g_dma_dev.intr_handler=amazon_atm_dma_handler;
- g_dma_dev.buffer_alloc=amazon_atm_alloc_rx;
- g_dma_dev.buffer_free=amazon_atm_free_tx;
- dma_device_register(&g_dma_dev);
-/***********intialize the atm hardware ****************/
- if ( atm_init_hard(&g_atm_dev) != 0){
- return NULL;
- }
- //start CBM
- AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
- wmb();
-
- //Start HTU
- AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
- wmb();
-
-
- // Register interrupts for insertion and extraction
- request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, IRQF_DISABLED, "tpe_swie", NULL);
- request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, IRQF_DISABLED, "tpe_cbm", NULL);
-#ifdef AMAZON_ATM_DEBUG
- request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, IRQF_DISABLED, "tpe_htu", NULL);
-#endif
-#ifdef AMAZON_TPE_TEST_AAL5_INT
- request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, IRQF_DISABLED, "tpe_aal5", NULL);
-#endif
- return &g_atm_dev;
-}
-
-/* Brief: clean up atm
- * Parameters: no
- * Return: no
- * Description:
- * Disable the device.
- */
-void amazon_atm_cleanup(void){
- int i;
- clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
- wake_up(&g_atm_dev.swie.sleep);
- up(&g_atm_dev.swie.in_sem);
- // diable SWIE interrupts
- AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR);
- AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR);
- wmb();
-
- // Disable schedulers ( including interrupts )-----------------------
- for (i = 0; i < AMAZON_ATM_PORT_NUM; i++);
- {
- AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR);
- AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR);
- AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)
- | QSB_RAMAC_REG_LOW
- | QSB_WRITE
- | i,
- QSB_RAMAC_ADDR);
- }
- // disable QSB_Interrupts
- AMAZON_WRITE_REGISTER_L( 0, QSB_IMR_ADDR);
- AMAZON_WRITE_REGISTER_L( 0, QSB_SRC_ADDR);
- // disable CBM interrupts
- AMAZON_WRITE_REGISTER_L( 0 , CBM_IMR0_ADDR);
- AMAZON_WRITE_REGISTER_L( 0 , CBM_SRC0_ADDR);
- // set CBM start bit to 0
- AMAZON_WRITE_REGISTER_L(0,CBM_CFG_ADDR);
- // request hardware extraction of queue 0, wich should force the CBM
- // to recognize that the start bit is not set
- AMAZON_WRITE_REGISTER_L(CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
- // write frame extraction command into the hw extract command register
- AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
- // disable htu
- // disable all HTU interrupts
- AMAZON_WRITE_REGISTER_L(0 ,HTU_IMR0_ADDR);
- AMAZON_WRITE_REGISTER_L(0 ,HTU_SRC0_ADDR);
-
- if (g_atm_dev.cbm.allocated){
- free_pages((unsigned long)g_atm_dev.cbm.mem_addr, get_log_2(((CBM_CELL_SIZE * g_atm_dev.cbm.free_cell_cnt) >>PAGE_SHIFT)+1));
-#ifdef CONFIG_USE_VENUS
- //to work around a bug, bit15 of QDOFF address should be 1
- free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4);
-#else //CONFIG_USE_VENUS
- kfree(g_atm_dev.cbm.qd_addr);
-#endif //CONFIG_USE_VENUS
- }
- atm_delete_proc();
- // free interrupts for insertion and extraction
- dma_device_unregister(&g_dma_dev);
- free_irq(AMAZON_SWIE_INT, NULL);
- free_irq(AMAZON_CBM_INT, NULL);
-#ifdef AMAZON_ATM_DEBUG
- free_irq(AMAZON_HTU_INT, NULL);
-#endif
-#ifdef AMAZON_TPE_TEST_AAL5_INT
- free_irq(AMAZON_AAL5_INT, NULL);
-#endif
-
-}
-
-/************************ ATM network interface ***********************************************/
-/* Brief: getsockopt
- */
-int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen)
-{
- int err=0;
- atm_aal5_vcc_t mib_vcc;
- AMAZON_TPE_DMSG("1\n");
- switch (optname){
- case SO_AMAZON_ATM_MIB_VCC:
- AMAZON_TPE_DMSG("2\n");
- err = amazon_atm_vcc_mib(vcc, &mib_vcc);
- AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors);
- err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc));
- AMAZON_TPE_DMSG("err %u\n",err);
- break;
- default:
- return -EFAULT;
- }
- return err;
-}
-
-/* Brief: IOCTL
- */
-
-int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg)
-{
- int err=0;
- //MIB
- atm_cell_ifEntry_t mib_cell;
- atm_aal5_ifEntry_t mib_aal5;
- atm_aal5_vcc_x_t mib_vcc;
- if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY;
- if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY;
-
- if (_IOC_DIR(cmd) & _IOC_READ)
- err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd));
- else if (_IOC_DIR(cmd) & _IOC_WRITE)
- err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd));
- if (err) {
- AMAZON_TPE_EMSG("acess verification fails \n");
- return -EFAULT;
- }
- switch(cmd) {
- case AMAZON_ATM_MIB_CELL:
- err = amazon_atm_cell_mib(&mib_cell,(u32)arg);
- if (err==0){
- err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell));
- }else{
- AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n");
- }
- break;
- case AMAZON_ATM_MIB_AAL5:
- err = amazon_atm_aal5_mib(&mib_aal5);
- if (err==0){
- err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5));
- }else{
- AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n");
- }
- break;
- case AMAZON_ATM_MIB_VCC:
- err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc));
- AMAZON_TPE_DMSG("return of copy_from_user %x\n",err);
- err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc));
- if (err==0){
- err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc));
- }else{
- AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n");
- }
-
- default:
- return -ENOTTY;
- }
- return err;
-}
-/* Brief: return a link list of OAM related time stamp info
- * Parameter: none
- * Return:
- a link list of "struct oam_last_activity" data
- * Description:
- Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated.
- Through this call, u get a list of this time stamp for all active connection.
- Please note that u have read-only access.
- */
-const struct oam_last_activity* get_oam_time_stamp()
-{
- int i,j;
- for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;i<CBM_RX_OFFSET+CBM_DEFAULT_Q_OFFSET+AMAZON_ATM_MAX_VCC_NUM;i++){
- if (g_atm_dev.queues[i].free != 1 && g_atm_dev.queues[i].vcc != NULL){
- //active connection
- if (j !=0 ){
- g_oam_time_stamp[j-1].next = &g_oam_time_stamp[j];
- }
- g_oam_time_stamp[j].vpi = g_atm_dev.queues[i].vcc->vpi;
- g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci;
- g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time;
- g_oam_time_stamp[j].next = NULL;
- j++;
- }
- }
- if (j==0) {
- return NULL;
- }else{
- return g_oam_time_stamp;
- }
-}
-
-
-/* Brief: call back routine for rx
- * Parameter:
- * vcc atm_vcc pointer
- * skb data if no error
- err error flag, 0: no error, 1:error
- * Return:
- * 0
- * <>0 cannot push up
- * Description:
- * release the packet if cannot push up
- */
-static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err)
-{
- if (err){
- if (vcc && vcc->stats) {
- atomic_inc(&vcc->stats->rx_err);
- }
- }else{
- ATM_SKB(skb)->vcc = vcc;
-
- if (!atm_charge(vcc, skb->truesize)){
- //no space this vcc
- AMAZON_TPE_EMSG("no space for this vcc\n");
- dev_kfree_skb_any(skb);
- return -ENOMEM;
- }
- atomic_inc(&vcc->stats->rx);
- AMAZON_TPE_DMSG("push to vcc\n");
- vcc->push(vcc,skb);
- }
- return 0;
-}
-int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags)
-{
- return amazon_atm_send_oam(vcc,cell,flags);
-}
-
-int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb)
-{
- int err=0;
- if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) {
- err=amazon_atm_send(vcc,skb);
- }else{
- //not supported
- err = -EPROTONOSUPPORT;
- }
- if (err){
- atomic_inc(&vcc->stats->tx_err);
- }else{
- atomic_inc(&vcc->stats->tx);
- }
- AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse));
- return err;
-}
-
-int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci)
-{
- vcc->itf = (int) vcc->dev->dev_data;
- vcc->vpi = vpi;
- vcc->vci = vci;
- return(amazon_atm_open(vcc,amazon_atm_net_push));
-}
-
-static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs)
-{
- int qid;
-
- if (vcc == NULL || qos == NULL){
- AMAZON_TPE_EMSG("invalid parameters\n");
- return -EINVAL;
- }
- qid = amazon_atm_get_queue(vcc);
- if (valid_qid(qid) != 1) {
- AMAZON_TPE_EMSG("no vcc connection opened\n");
- return -EINVAL;
- }
- set_qsb(vcc,qos,qid);
- return 0;
-}
-
-static struct atmdev_ops amazon_atm_ops = {
- open: amazon_atm_net_open,
- close: amazon_atm_close,
- ioctl: amazon_atm_ioctl,
- send: amazon_atm_net_send,
- send_oam: amazon_atm_net_send_oam,
-// getsockopt: amazon_atm_getsockopt,
- change_qos: amazon_atm_change_qos,
-// proc_read: amazon_atm_proc_read,
- owner: THIS_MODULE,
-}; // ATM device callback functions
-
-/*
- * brief "/proc" function
- */
-int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data)
-{
- int buf_off=0; /* for buf */
- int i=0,j=0;
- int type= (u32)data;//which module
- atm_aal5_ifEntry_t mib_aal5;
- atm_cell_ifEntry_t mib_cell;
- atm_aal5_vcc_t mib_vcc;
- switch(type){
- case PROC_MIB:
- //MIB counter
- amazon_atm_aal5_mib(&mib_aal5);
- //TX:
- buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n");
- buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts);
- buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros);
- buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards);
- buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n",
- mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l);
- //RX:
- buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n");
- buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n",
- mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l);
- buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards);
- buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors);
- buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts);
-
- //Cell level
- buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n");
- amazon_atm_cell_mib(&mib_cell,0);
-#ifdef AMAZON_TPE_READ_ARC
- buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
- buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
- buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
- amazon_atm_cell_mib(&mib_cell,1);
- buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
- buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
- buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
-#endif
- buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos);
-
- buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n");
- buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd);
-#ifdef AMAZON_TPE_SCR
- buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait);
-#endif
- break;
- case PROC_ATM:
- //Interface (Port)
- buf_off+=sprintf(buf+buf_off,"[Interfaces]\n");
- for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
- if (g_atm_dev.ports[i].enable==0){
- buf_off+=sprintf(buf+buf_off,"\tport[%u] not in use\n",i);
- }else{
- buf_off+=sprintf(buf+buf_off,"\tport[%u]\n\t\tmax_conn=%u\n"
- ,i
- ,g_atm_dev.ports[i].max_conn
- );
- buf_off+=sprintf(buf+buf_off,"\t\ttx_max=%u\n\t\trem=%u\n\t\tcur=%u\n"
- ,g_atm_dev.ports[i].tx_max_cr
- ,g_atm_dev.ports[i].tx_rem_cr
- ,g_atm_dev.ports[i].tx_cur_cr
- );
- }
-
- }
- //Units Info
- //AAL5
- buf_off+=sprintf(buf+buf_off,"[AAL5]\n\tpad=%c(%x)\n\trx_mtu=%u\n\ttx_mtu=%u\n"
- ,g_atm_dev.aal5.padding_byte
- ,g_atm_dev.aal5.padding_byte
- ,g_atm_dev.aal5.rx_max_sdu
- ,g_atm_dev.aal5.tx_max_sdu
- );
- //CBM
- buf_off+=sprintf(buf+buf_off,
- "[CBM]\n\tnrt_thr=%u\n\tclp0_thr=%u\n\tclp1_thr=%u\n\ttx_q_threshold=%u\n\trx_q_threshold=%u\n\toam_q_threshold=%u\n\tfree_cell_cnt=%u\n"
- ,g_atm_dev.cbm.nrt_thr
- ,g_atm_dev.cbm.clp0_thr
- ,g_atm_dev.cbm.clp1_thr
- ,tx_q_threshold
- ,rx_q_threshold
- ,oam_q_threshold
- ,g_atm_dev.cbm.free_cell_cnt
- );
- //QSB
- buf_off+=sprintf(buf+buf_off,"[QSB]\n\ttau=%u\n\ttstepc=%u\n\tsbl=%u\n"
- ,g_atm_dev.qsb.tau
- ,g_atm_dev.qsb.tstepc
- ,g_atm_dev.qsb.sbl
- );
- buf_off+=sprintf(buf+buf_off,"[Debugging]\n\taal5_need_copy=%u\n",g_atm_dev.aal5.cnt_cpy);
- break;
- case PROC_VCC:
- for(i=CBM_DEFAULT_Q_OFFSET,j=0;i<g_atm_dev.cbm.max_q_off+CBM_DEFAULT_Q_OFFSET;i++){
- if (g_atm_dev.queues[i].free!=1){
- buf_off+=sprintf(buf+buf_off,"vcc[%u]\n\tvpi=%u vci=%u itf=%u qid=%u access_time=%u.%u\n"
- ,j++
- ,g_atm_dev.queues[i].vcc->vpi
- ,g_atm_dev.queues[i].vcc->vci
- ,g_atm_dev.queues[i].vcc->itf
- ,i
- ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec
- ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec
- );
- buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
- ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class
- ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr
- ,g_atm_dev.queues[i].vcc->qos.txtp.pcr
- ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr
- ,g_atm_dev.queues[i].vcc->qos.txtp.scr
- ,g_atm_dev.queues[i].vcc->qos.txtp.mbs
- ,g_atm_dev.queues[i].vcc->qos.txtp.cdv
- );
- buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
- ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class
- ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr
- ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr
- ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr
- ,g_atm_dev.queues[i].vcc->qos.rxtp.scr
- ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs
- ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv
- );
- __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc);
- buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors);
- buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs);
-#ifdef AMAZON_ATM_DEBUG
- if ( valid_qid(i+CBM_RX_OFFSET)){
- buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" );
- buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]);
- buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] );
- buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] );
- }
-
- buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" );
- buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]);
- buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] );
- buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] );
- buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] );
-
-#endif
-
- }
-
- }
- break;
- default:
- break;
- }
- if(buf_off>0) *eof = 1;
- return buf_off;
-}
-
-#ifdef AMAZON_TPE_AAL5_RECOVERY
-extern int (*tpe_reset)(void);
-extern int (*tpe_start)(void);
-extern int (*tpe_inject)(void);
-/* Brief: Reset TPE hardware
- * Description
- * This is a wordaround for AAL5 bug. It tries to reset TPE.
- * take care of software
- * setup all previous connection
- */
-int amazon_tpe_reset(void)
-{
- struct atm_vcc * vcc;
- int err=0;
- int i;
- u8 * qd_addr;
- u32 reg_l, reg_h;
- unsigned int a_cfg_value=0;
- unsigned int a_cfg_old_value=0;
- atm_aal5_ifEntry_t mib_aal5;
- atm_cell_ifEntry_t mib_cell;
-
- //make sure all cells transmitting out first
- //Segmentation done
- amazon_atm_aal5_mib(&mib_aal5);
- reg_l = g_atm_dev.mib_counter.tx_cnt_l;
- reg_h = g_atm_dev.mib_counter.tx_cnt_h;
- while(1){
- mdelay(10);
- amazon_atm_aal5_mib(&mib_aal5);
- if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){
- break;
- }
- AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n");
- reg_l = g_atm_dev.mib_counter.tx_cnt_l;
- reg_h = g_atm_dev.mib_counter.tx_cnt_h;
- }
- //QSB done
- qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
- for (i=1;i<15;i++){
- while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){
- mdelay(20);
- AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err);
- }
- }
- //insurance for interfaces between Aware and CARB
- mdelay(100);
- amazon_atm_cell_mib(&mib_cell,0);
- amazon_atm_cell_mib(&mib_cell,1);
- amazon_atm_aal5_mib(&mib_aal5);
-
- mb();
- while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){
- AMAZON_TPE_EMSG("\nwaiting for AWARE");
- AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0));
- AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1));
- AMAZON_TPE_EMSG("\n");
- mdelay(1);
- }
- // disable AAI module
- meiDebugRead(A_CFG_ADDR,&a_cfg_value,1);
- a_cfg_old_value=a_cfg_value;
- a_cfg_value &= (~(0x2800));
- meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1);
- //clear buffer
- a_cfg_value = 0x1;
- meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1);
- meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1);
-
- if ( atm_init_hard(&g_atm_dev) != 0){
- return -EIO;
- }
- sema_init(&(g_atm_dev.swie.in_sem), 1);
- //SWIE lock
- clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
- //SWIE wait queue
- init_waitqueue_head(&(g_atm_dev.swie.sleep));
-
- for (i=CBM_DEFAULT_Q_OFFSET;i<AMAZON_ATM_MAX_QUEUE_NUM/2;i++) {
- vcc = g_atm_dev.queues[i].vcc;
- if (vcc != NULL){
- set_qsb(vcc, &vcc->qos, i);
- set_qd(vcc, i);
- mb();
- err=set_htu(vcc,i);
- if (err){
- AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
- }
- }
- }
- meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1);
-#if 0
- //reset DFE
- *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE);
- mb();
- *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE);
- mb();
-#endif
-
- return 0;
-}
-
-/* Brief: Send a ATM EoP packet to save DMA channel
- */
-int amazon_tpe_inject_debug_cell(void)
-{
- //Send a ATM cell to save DMA channel
- u8 qid;
- unsigned char atm_cell[48];
- qid = 0x11;
- AMAZON_TPE_DMSG("qid = %d\n",qid);
- memset(atm_cell,0,48);
- atm_cell[3] = 0x2;
- if ( amazon_atm_swin(qid,atm_cell)) {
- AMAZON_TPE_EMSG("cannot insert EoP cell\n");
- return -1;
- }
- return 0;
-}
-
-/* Brief: start HTU (TPE)
- */
-
-int amazon_tpe_start(void)
-{
- AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
- wmb();
- return 0;
-}
-#endif //AMAZON_TPE_AAL5_RECOVERY
-
-#ifdef AMAZON_CHECK_LINK
-extern int (*adsl_link_notify)(int);
-/* Brief: notify link status of ADSL link
- * Parameters: 0 link down
- * 1 link up
- * Returns: 0 OK
- * Details: called by MEI driver
- * should update status and inform upper layer
- */
-int amazon_tpe_link_notify(int status)
-{
- adsl_link_status = status;
- AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down");
- if (status == 0){
- //wait until no cells in upstream queues
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(2*HZ);
- }
- return 0;
-}
-#endif //ifdef AMAZON_CHECK_LINK
-
-/*
- * Brief: Initialize ATM module
- *
- * Return Value: ENOMEM - No memory available
- * EBUSY - Cannot register atm device
- * ERESTARTSYS - Process interrupted by other signal
- * 0 - OK, module initialized
- *
- * Description:
- * This function registers an atm device for all UTOPIA devices.
- * It also allocates memory for the private device data structures
- */
-int __init amazon_atm_net_init(void)
-{
- int i;
- int err=0;
- amazon_atm_dev_t *dev = NULL;
-
- if ((dev=amazon_atm_create()) != NULL){
- for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
- if (!dev->ports[i].enable){
- amazon_atm_devs[i] = NULL;
- continue;
- }
- amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL);
- if (amazon_atm_devs[i] == NULL){
- AMAZON_TPE_EMSG("atm_dev_register fails\n");
- err = -EIO;
- goto amazon_atm_net_init_exit;
- }else{
- AMAZON_TPE_DMSG("registering device %u\n",i);
- amazon_atm_devs[i]->ci_range.vpi_bits = 8;
- amazon_atm_devs[i]->ci_range.vci_bits = 16;
- amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr;
- amazon_atm_devs[i]->dev_data = (void *) i;
- }
- }
-
- }else{
- err = -ENOMEM;
- AMAZON_TPE_EMSG("cannot init atm device\n");
- goto amazon_atm_net_init_exit;
- }
-#ifdef AMAZON_TPE_AAL5_RECOVERY
- tpe_reset = & amazon_tpe_reset;
- tpe_start = & amazon_tpe_start;
- tpe_inject = & amazon_tpe_inject_debug_cell;
-#endif //AMAZON_TPE_AAL5_RECOVERY
-#ifdef AMAZON_CHECK_LINK
- adsl_link_notify=amazon_tpe_link_notify;
-#endif //AMAZON_CHECK_LINK
-amazon_atm_net_init_exit:
- return err;
-}
-
-void __exit amazon_atm_net_cleanup(void)
-{
- int i;
- amazon_atm_cleanup();
- for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
- if (amazon_atm_devs[i] != NULL){
- AMAZON_TPE_DMSG("unregister dev %u\n",i);
- atm_dev_deregister(amazon_atm_devs[i]);
- }
- }
- return;
-}
-EXPORT_SYMBOL(get_oam_time_stamp);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR("Infineon IFAP DC COM peng.liu@infineon.com");
-MODULE_DESCRIPTION("AMAZON ATM driver");
-
-module_init(amazon_atm_net_init);
-module_exit(amazon_atm_net_cleanup);
-
-
-
-
-
diff --git a/target/linux/amazon/files/drivers/char/amazon_mei.c b/target/linux/amazon/files/drivers/char/amazon_mei.c
deleted file mode 100644
index 7efe52ed60..0000000000
--- a/target/linux/amazon/files/drivers/char/amazon_mei.c
+++ /dev/null
@@ -1,7918 +0,0 @@
-/* ============================================================================
- * Copyright (C) 2004 -Infineon Technologies AG.
- *
- * All rights reserved.
- * ============================================================================
- *
- *============================================================================
- * Licensed under GNU GPL v2
- * ============================================================================
- */
-
-
-/* ===========================================================================
- *
- * File Name: amazon_mei.c
- * Author : Ou Ke
- *
- * ===========================================================================
- *
- * Project: Amazon
- *
- * ===========================================================================
- * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+
- * controller.
- *
- * ===========================================================================
- * References:
- *
- */
-
-
-/* ===========================================================================
- * Revision History:
- * 12/1/2005 : Ritesh Banerjee
- * - Create a kernel thread kmibpoll to poll for periodic RFC 2662
- * and RFC 3440 counters. Removes the need for user space
- * adsl_mibpoll_daemon and saves atleast 30KB of RAM.
- *
- * $Log$
- * ===========================================================================
- */
-
-/*
- * ===========================================================================
- * INCLUDE FILES
- * ===========================================================================
- */
-//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock
-//000003:fchang 2005/6/2 Henry added for Amazon-E support
-//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
-// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC
-// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
-
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-#define AMAZON_MEI_MIB_RFC3440
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <asm/irq.h>
-#include <asm/segment.h>
-#include <asm/semaphore.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <linux/proc_fs.h>
-#include <asm/io.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
-#include <linux/list.h>
-#include <linux/time.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/irq.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon_mei.h>
-#include <asm/amazon/amazon_mei_app.h>
-#include <asm/amazon/amazon_mei_ioctl.h>
-#include <asm/amazon/amazon_mei_app_ioctl.h>
-
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-#ifdef AMAZON_CHECK_LINK
-//amazon_tpe.c
-extern int (*adsl_link_notify)(int);
-#endif //AMAZON_CHECK_LINK
-
-// for ARC memory access
-#define WHILE_DELAY 20000
-#define AMAZON_DMA_DEBUG_MUTEX
-
-
-//TODO
-#undef DFE_LOOPBACK
-#define ARC_READY_ACK
-
-static amazon_mei_mib * current_intvl;
-static struct list_head interval_list;
-static amazon_mei_mib * mei_mib;
-
-static int reboot_firsttime=1;//000002:fchang
-
- //PCM
-#define PCM_CHANNEL_NUM 2 //1 rx, 1 tx
-static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4))); //0=tx0, 1=rx0, 2=tx1, 3=rx1
-static u32 pcm_start_addr;
-//#define PCM_HRT_TIME_HZ 4000 //?us
-#define PCM_ACCESS_DEBUG
-static int irqtimes=0;
-#undef DATA_LED_ON_MODE
-#define ADSL_LED_SUPPORT //joelin for adsl led
-#ifdef ADSL_LED_SUPPORT
-static int firmware_support_led=0; //joelin version check for adsl led
-static int stop_led_module=0; //wakeup and clean led module
-static int led_support_check=0; //1.1.2.7.1.1
-#endif //ADSL_LED_SUPPORT
-#define IFX_DYING_GASP
-#ifdef IFX_DYING_GASP
-static wait_queue_head_t wait_queue_dying_gasp; //dying gasp
-//struct tq_struct dying_gasp_task; //dying gasp
-static wait_queue_head_t wait_queue_uas_poll; //joelin 04/16/2005
-static u16 unavailable_seconds=0; //joelin 04/16/2005
-static meidebug lop_debugwr; //dying gasp
-#endif //IFX_DYING_GASP
-static int dbg_int=0;
-//#define DEBUG_ACCESS_DELAY for(dbg_int=0;dbg_int<100;dbg_int++){;}
-#define DEBUG_ACCESS_DELAY
-static u8 sampledata[512];
-static int firsttime[PCM_CHANNEL_NUM]={0,1};
-static int num_cmp[PCM_CHANNEL_NUM]={0,0};
-static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0};
-
- // for clearEoC
-//#define MEI_CLREOC_BUFF_SIZE 512 //double the receive fifo size, bytes
-//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4))); //buffer to hold clearEoC data in bytes
-#undef AMAZON_CLEAR_EOC
-#ifdef AMAZON_CLEAR_EOC
-extern void ifx_push_eoc(struct sk_buff * pkt);
-#endif
-static int meiResetArc(void);
-#define IFX_POP_EOC_DONE 0
-#define IFX_POP_EOC_FAIL -1
-static struct list_head clreoc_list;
-static amazon_clreoc_pkt * clreoc_pkt;
-#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered
-//static int clreoc_wr=0;
-//static int clreoc_rd=0; //used to control clreoc circular buffer
-static wait_queue_head_t wait_queue_clreoc;
-#ifdef ADSL_LED_SUPPORT
-static wait_queue_head_t wait_queue_led; //adsl led
-static wait_queue_head_t wait_queue_led_polling;// adsl led
-struct tq_struct led_task; // adsl led
-static DECLARE_TASK_QUEUE(tq_ifx_led); // task
-int adsl_led_flash_task(void *ptr); // adsl led
-#endif //ADSL_LED_SUPPORT
-static void * clreoc_command_pkt=NULL;
-static int clreoc_max_tx_len=0;
-
-// 603221:tc.chen start
-#define ME_HDLC_IDLE 0
-#define ME_HDLC_INVALID_MSG 1
-#define ME_HDLC_MSG_QUEUED 2
-#define ME_HDLC_MSG_SENT 3
-#define ME_HDLC_RESP_RCVD 4
-#define ME_HDLC_RESP_TIMEOUT 5
-#define ME_HDLC_RX_BUF_OVERFLOW 6
-#define ME_HDLC_UNRESOLVED 1
-#define ME_HDLC_RESOLVED 2
-// 603221:tc.chen end
-
-#ifdef LOCK_RETRY
-static int reboot_lock=0;
-#endif
-
-static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0};
-static mib_flags_pretime mib_pflagtime;// initialized when module loaded
-
- static u32 ATUC_PERF_LOFS=0;
- static u32 ATUC_PERF_LOSS=0;
- static u32 ATUC_PERF_ESS=0;
- static u32 ATUC_PERF_INITS=0;
- static u32 ATUR_PERF_LOFS=0;
- static u32 ATUR_PERF_LOSS=0;
- static u32 ATUR_PERF_LPR=0;
- static u32 ATUR_PERF_ESS=0;
- static u32 ATUR_CHAN_RECV_BLK=0;
- static u32 ATUR_CHAN_TX_BLK=0;
- static u32 ATUR_CHAN_CORR_BLK=0;
- static u32 ATUR_CHAN_UNCORR_BLK=0;
- //RFC-3440
- static u32 ATUC_PERF_STAT_FASTR=0;
- static u32 ATUC_PERF_STAT_FAILED_FASTR=0;
- static u32 ATUC_PERF_STAT_SESL=0;
- static u32 ATUC_PERF_STAT_UASL=0;
- static u32 ATUR_PERF_STAT_SESL=0;
- static u32 ATUR_PERF_STAT_UASL=0;
-
- static adslChanPrevTxRate PrevTxRate={0,0};
- static adslPhysCurrStatus CurrStatus={0,0};
- static ChanType chantype={0,0};
- static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1};
-// 603221:tc.chen start
- static adslFarEndPerfStats FarendStatsData;
- struct timeval FarendData_acquire_time={0};
- static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+
- static adslInitStats AdslInitStatsData;
-//603221:tc.chen end
-static u32 loop_diagnostics_mode=0;
-static wait_queue_head_t wait_queue_loop_diagnostic;
-#ifdef AMAZON_MEI_MIB_RFC3440
- static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0};
-#endif
-
-static int showtime=0;
-static int loop_diagnostics_completed=0;
-//////////////////////////////////////////////////////////////////////////////////
-static int phy_mei_net_init(struct net_device * dev);
-static int interleave_mei_net_init(struct net_device * dev);
-static int fast_mei_net_init(struct net_device * dev);
-static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev);
-static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev);
-static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev);
-
-typedef struct mei_priv{
- struct net_device_stats stats;
-}mei_priv;
-
-static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"};
-static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"};
-static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"};
-///////////////////////////////////////////////////////////////////////////////////
-
-static int major=AMAZON_MEI_MAJOR;
-
-static struct semaphore mei_sema;
-
-// Mei to ARC CMV count, reply count, ARC Indicator count
-static int indicator_count=0;
-static int cmv_count=0;
-static int reply_count=0;
-static u16 Recent_indicator[MSG_LENGTH];
-
-// Used in interrupt handler as flags
-static int arcmsgav=0;
-static int cmv_reply=0;
-static int cmv_waiting=0;
-
-#define PROC_ITEMS 8
-
-long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug
-
-// to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
-static wait_queue_head_t wait_queue_arcmsgav;
-static wait_queue_head_t wait_queue_codeswap;
-static wait_queue_head_t wait_queue_mibdaemon;
-static wait_queue_head_t wait_queue_reboot;
-static u32 * image_buffer=NULL; // holding adsl firmware image
-static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));
-static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4)));
-static u32 * mei_arc_swap_buff=NULL; // holding swap pages
-static ARC_IMG_HDR * img_hdr;
-static int reboot_flag;
-
-#ifdef DFE_LOOPBACK
-#include "arc_pm.h"
-#endif
-
-
-///////////////// net device ///////////////////////////////////////////////////
-static int phy_mei_net_init(struct net_device * dev)
-{
- //ether_setup(dev);
- dev->get_stats = phy_mei_net_get_stats;
- dev->ip_ptr = NULL;
- dev->type = 94;
-
-// dev->mtu=12345;
- dev->flags=IFF_UP;
-
- dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
- if(dev->priv == NULL)
- return -ENOMEM;
- memset(dev->priv, 0, sizeof(struct mei_priv));
- return 0;
-}
-
-static int interleave_mei_net_init(struct net_device * dev)
-{
- //ether_setup(dev);
- dev->get_stats = interleave_mei_net_get_stats;
- dev->ip_ptr = NULL;
- dev->type = 124;
- dev->flags=IFF_UP;
- dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
- if(dev->priv == NULL)
- return -ENOMEM;
- memset(dev->priv, 0, sizeof(struct mei_priv));
- return 0;
-}
-
-static int fast_mei_net_init(struct net_device * dev)
-{
- //ether_setup(dev);
- dev->get_stats = fast_mei_net_get_stats;
- dev->ip_ptr = NULL;
- dev->type = 125;
- dev->flags=IFF_UP;
- dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL);
- if(dev->priv == NULL)
- return -ENOMEM;
- memset(dev->priv, 0, sizeof(struct mei_priv));
- return 0;
-}
-
-static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev)
-{
- struct mei_priv * priv;
- priv = (struct mei_priv *)dev->priv;
- // update statistics
- (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
- (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
- (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
- (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-
- return &(priv->stats);
-}
-
-static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev)
-{
- struct mei_priv * priv;
- priv = (struct mei_priv *)dev->priv;
- // update statistics
- (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
- (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
- (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
- (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-
- return &(priv->stats);
-}
-
-static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev)
-{
- struct mei_priv * priv;
- priv = (struct mei_priv *)dev->priv;
- // update statistics
- (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK;
- (priv->stats).tx_packets = ATUR_CHAN_TX_BLK;
- (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK;
- (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK;
-
- return &(priv->stats);
-}
-///////////////// mei access Rd/Wr methods ///////////////////////////////////////////////////
-void meiLongwordWrite(u32 ul_address, u32 ul_data)
-{
- *((volatile u32 *)ul_address) = ul_data;
- asm("SYNC");
- return;
-} // end of "meiLongwordWrite(..."
-
-void meiLongwordRead(u32 ul_address, u32 *pul_data)
-{
- *pul_data = *((volatile u32 *)ul_address);
- asm("SYNC");
- return;
-} // end of "meiLongwordRead(..."
-
-MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( destaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the write transfer address
- meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
- // Write the data pushed across DMA
- while (databuffsize--)
- {
- temp = *p;
- if(databuff==(u32 *)TxMessage) // swap half word
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
- meiLongwordWrite(MEI_DATA_XFR, temp);
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMAWrite(..."
-
-MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( destaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the write transfer address
- meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
- // Write the data pushed across DMA
- while (databuffsize--)
- {
- temp = *p;
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
- meiLongwordWrite(MEI_DATA_XFR, temp);
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMAWrite_16(..."
-
-MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( destaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the write transfer address
- meiLongwordWrite(MEI_XFR_ADDR, destaddr);
-
- // Write the data pushed across DMA
- while (databuffsize--)
- {
- temp = *p;
- temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
- meiLongwordWrite(MEI_DATA_XFR, temp);
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMAWrite_8(..."
-
-MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( srcaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the read transfer address
- meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
- // Read the data popped across DMA
- while (databuffsize--)
- {
- meiLongwordRead(MEI_DATA_XFR, &temp);
- if(databuff==(u32 *)RxMessage) // swap half word
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
- *p=temp;
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMARead(..."
-
-MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( srcaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the read transfer address
- meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
- // Read the data popped across DMA
- while (databuffsize--)
- {
- meiLongwordRead(MEI_DATA_XFR, &temp);
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);
- *p=temp;
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMARead_16(..."
-
-MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 *p = databuff;
- u32 temp;
- u32 flags;
-
- if( srcaddr & 3)
- return MEI_FAILURE;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Set the read transfer address
- meiLongwordWrite(MEI_XFR_ADDR, srcaddr);
-
- // Read the data popped across DMA
- while (databuffsize--)
- {
- meiLongwordRead(MEI_DATA_XFR, &temp);
- temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
- *p=temp;
- p++;
- } // end of "while(..."
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- return MEI_SUCCESS;
-
-} // end of "meiDMARead_8(..."
-
-void meiPollForDbgDone(void)
-{
- u32 query = 0;
- int i=0;
- while (i<WHILE_DELAY)
- {
- meiLongwordRead(ARC_TO_MEI_INT, &query);
- query &= (ARC_TO_MEI_DBG_DONE);
- if(query)
- break;
- i++;
- if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n PollforDbg fail");
-#endif
- }
- DEBUG_ACCESS_DELAY;
- }
- meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE); // to clear this interrupt
-} // end of "meiPollForDbgDone(..."
-
-MEI_ERROR meiDebugWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and write the data
- address = destaddr;
- buffer = databuff;
- for (i=0; i < databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_WAD, address);
- DEBUG_ACCESS_DELAY;
- temp=*buffer;
- temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
- meiLongwordWrite(MEI_DEBUG_DATA, temp);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugWrite_8(..."
-
-MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and read the data
- address = srcaddr;
- buffer = databuff;
- for (i=0; i<databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_RAD, address);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &temp);
- DEBUG_ACCESS_DELAY;
- temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte
- *buffer=temp;
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugRead_8(..."
-
-MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and write the data
- address = destaddr;
- buffer = databuff;
- for (i=0; i < databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_WAD, address);
- DEBUG_ACCESS_DELAY;
- temp=*buffer;
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
- meiLongwordWrite(MEI_DEBUG_DATA, temp);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugWrite_16(..."
-
-MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and read the data
- address = srcaddr;
- buffer = databuff;
- for (i=0; i<databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_RAD, address);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &temp);
- DEBUG_ACCESS_DELAY;
- temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word
- *buffer=temp;
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugRead_16(..."
-
-MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and write the data
- address = destaddr;
- buffer = databuff;
- for (i=0; i < databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_WAD, address);
- DEBUG_ACCESS_DELAY;
- temp=*buffer;
- meiLongwordWrite(MEI_DEBUG_DATA, temp);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory write
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugWrite(..."
-
-MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize)
-{
- u32 i;
- u32 temp = 0x0;
- u32 address = 0x0;
- u32 *buffer = 0x0;
- u32 flags;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- save_flags(flags);
- cli();
-#endif
-
-
- // Open the debug port before DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK);
- DEBUG_ACCESS_DELAY;
-
- // For the requested length, write the address and read the data
- address = srcaddr;
- buffer = databuff;
- for (i=0; i<databuffsize; i++)
- {
- meiLongwordWrite(MEI_DEBUG_RAD, address);
- DEBUG_ACCESS_DELAY;
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &temp);
- DEBUG_ACCESS_DELAY;
- *buffer=temp;
- address += 4;
- buffer++;
- } // end of "for(..."
-
- // Close the debug port after DMP memory read
- meiLongwordRead(MEI_CONTROL, &temp);
- DEBUG_ACCESS_DELAY;
- temp &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, temp);
- DEBUG_ACCESS_DELAY;
-
-#ifdef AMAZON_DMA_DEBUG_MUTEX
- restore_flags(flags);
-#endif
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiDebugRead(..."
-EXPORT_SYMBOL(meiDebugRead);
-
-void meiMailboxInterruptsDisable(void)
-{
- meiLongwordWrite(ARC_TO_MEI_INT_MASK, 0x0);
-} // end of "meiMailboxInterruptsDisable(..."
-
-void meiMailboxInterruptsEnable(void)
-{
- meiLongwordWrite(ARC_TO_MEI_INT_MASK, MSGAV_EN);
-} // end of "meiMailboxInterruptsEnable(..."
-
-MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize)
-{
- int i;
- u32 arc_mailbox_status = 0x0;
- u32 temp=0;
- MEI_ERROR meiMailboxError = MEI_SUCCESS;
-
- // Check arc if mailbox write can be initiated
-/* meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
- if ((arc_mailbox_status & MEI_TO_ARC_MSGAV))
- {
- return MEI_MAILBOX_FULL;
- }
-*/
- // Write to mailbox
- meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOX, (u32*)msgsrcbuffer, msgsize/2);
- meiMailboxError = meiDMAWrite(MEI_TO_ARC_MAILBOXR, (u32 *)(&temp), 1);
-
- // Notify arc that mailbox write completed
- cmv_waiting=1;
- meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
-
- i=0;
- while(i<WHILE_DELAY){ // wait for ARC to clear the bit
- meiLongwordRead(MEI_TO_ARC_INT, &arc_mailbox_status);
- if((arc_mailbox_status & MEI_TO_ARC_MSGAV) != MEI_TO_ARC_MSGAV)
- break;
- i++;
- if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n MEI_TO_ARC_MSGAV not cleared by ARC");
-#endif
- meiMailboxError = MEI_FAILURE;
-#if 0
- for(i=0;i<msgsize;i++)
- printk("\n %8x", (*(msgsrcbuffer+i)));
-#endif
- }
- }
-
- // Return
- return meiMailboxError;
-
-} // end of "meiMailboxWrite(..."
-
-MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize)
-{
- //u32 arc_mailbox_status = 0x0;
- //u32 *mei_arc_msgbuff = 0x0;
- MEI_ERROR meiMailboxError = MEI_SUCCESS;
-
- /*
- // Check arc if mailbox read can be initiated
- meiLongwordRead(ARC_TO_MEI_INT, &arc_mailbox_status);
- if ((arc_mailbox_status & ARC_TO_MEI_MSGAV) == 0)
- {
- return MEI_MAILBOX_EMPTY;
- } // end of "if(..."
- */
-
- // Read from mailbox
- meiMailboxError = meiDMARead(ARC_TO_MEI_MAILBOX, (u32*)msgdestbuffer, msgsize/2);
-
- // Notify arc that mailbox read completed
- meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-
- // Return
- return meiMailboxError;
-
-} // end of "meiMailboxRead(..."
-
-MEI_ERROR meiHaltArc(void)
-{
- u32 arc_control_mode = 0x0;
- u32 arc_debug_addr = 0x5;
- u32 arc_debug_data = 0x0;
-
- // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- // Write arc aux reg access mask (0x0) into debug addr decode reg
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
- // Write arc debug reg addr (0x5) into debug read addr reg
- meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
- meiPollForDbgDone();
-
- // Read debug data reg and save content
- meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
- // Write arc debug reg addr (0x5) into debug write addr reg
- meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
-
- // Write debug data reg with content ORd with 0x2 (halt bit set)
- arc_debug_data |= (BIT1);
- meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
- meiPollForDbgDone();
-
- // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiHalt(..."
-
-MEI_ERROR meiDownloadBootCode(void)
-{
- u32 arc_control_mode;
- u32 boot_loop;
- u32 page_size;
- u32 dest_addr;
-
- u32 arc_debug_addr = 0x31F00;
- u32 arc_debug_data = 0x10;
- u32 temp;
-// int i;
-
- //MEI_ERROR meiDMAError = MEI_SUCCESS;
-
- // Disable mask for arc codeswap interrupts
- meiMailboxInterruptsDisable();
-
- // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- // Write (0x10) to CRI_CCR0(0x31F00) to enable ac_clk signal
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &temp);
- temp |=arc_debug_data;
-
- meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
- meiLongwordWrite(MEI_DEBUG_DATA, temp);
- meiPollForDbgDone();
- //meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
- // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-// printk("\n\n ac_clk is %8x\n", arc_debug_data);
-#endif
-
- /*
- ** DMA the boot code page(s)
- */
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n start download pages");
-#endif
- for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++)
- {
- if( img_hdr->page[boot_loop].p_size & BOOT_FLAG)
- {
- page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( page_size > 0)
- {
- meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
- }
- }
- if( img_hdr->page[boot_loop].d_size & BOOT_FLAG)
- {
- page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( page_size > 0)
- {
- meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
- }
- }
- }
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n pages downloaded");
-#endif
- return MEI_SUCCESS;
-
-} // end of "meiDownloadBootCode(..."
-
-MEI_ERROR meiRunArc(void)
-{
- u32 arc_control_mode = 0x0;
- u32 arc_debug_addr = 0x0;
- u32 arc_debug_data = 0x0;
-
- // Switch arc control from JTAG mode to MEI mode- write '1' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- // Write arc aux reg access mask (0x0) into debug addr decode reg
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK);
-
- // Write arc status aux reg addr (0x0) into debug read addr reg
- meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
- meiPollForDbgDone();
-
- // Read debug data reg and save content
- meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
- // Write arc status aux reg addr (0x0) into debug write addr reg
- meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr);
-
- // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
- arc_debug_data &= ~(BIT25);
- meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data);
- meiPollForDbgDone();
-
- // Switch arc control from MEI mode to JTAG mode- write '0' to bit0
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- // Enable mask for arc codeswap interrupts
- meiMailboxInterruptsEnable();
-
- // Return
- return MEI_SUCCESS;
-
-} // end of "meiActivate(..."
-
-int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest)
-{
- u32 size;
- u32 i;
- u32 *p;
-
- if( Page > img_hdr->count)
- return -2;
-
- /*
- ** Get program or data size, depending on "data" flag
- */
- size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size;
-
- size &= BOOT_FLAG_MASK; // Clear boot bit!
- if( size > MaxSize)
- return -1;
-
- if( size == 0)
- return 0;
- /*
- ** Get program or data offset, depending on "data" flag
- */
- i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset;
-
- /*
- ** Copy data/program to buffer
- */
-
- i /= 4; // Adjust offset for byte-to-UINT for array operation
-
- p = (u32 *)img_hdr + i;
- for(i = 0; i < size; i++)
- Buffer[i] = *p++;
- /*
- ** Pass back data/program destination address
- */
- *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest;
-
- return size;
-}
-
-MEI_ERROR meiCMV(u16 * request, int reply) // write cmv to arc, if reply needed, wait for reply
-{
- MEI_ERROR meierror;
- wait_queue_t wait;
-
- cmv_reply=reply;
-
- meierror = meiMailboxWrite(request, MSG_LENGTH);
-
- if(meierror != MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n MailboxWrite Fail.");
-#endif
- return meierror;
- }
- else{
- cmv_count++;
- }
-
- if(cmv_reply == NO_REPLY)
- return MEI_SUCCESS;
-
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&wait_queue_arcmsgav, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
-// cmv_waiting=1;
-
- if(arcmsgav==1){
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&wait_queue_arcmsgav, &wait);
- }
- else{
- schedule_timeout(CMV_TIMEOUT);
- remove_wait_queue(&wait_queue_arcmsgav, &wait);
- }
- if(arcmsgav==0){//CMV_timeout
- cmv_waiting=0;
- arcmsgav=0;
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n");
-#endif
- return MEI_MAILBOX_TIMEOUT;
- }
- else{
- arcmsgav=0;
- reply_count++;
- return MEI_SUCCESS;
- }
-}
-
-//TODO, for loopback test
-#ifdef DFE_LOOPBACK
-#define mte_reg_base (0x4800*4+0x20000)
-
-/* Iridia Registers Address Constants */
-#define MTE_Reg(r) (int)(mte_reg_base + (r*4))
-
-#define IT_AMODE MTE_Reg(0x0004)
-
-
-#define OMBOX_BASE 0x15F80
-#define IMBOX_BASE 0x15FC0
-
-#define TIMER_DELAY (1024)
-#define BC0_BYTES (32)
-#define BC1_BYTES (30)
-#define NUM_MB (12)
-#define TIMEOUT_VALUE 2000
-
-void BFMWait (u32 cycle) {
- u32 i;
- for (i = 0 ; i< cycle ; i++);
-}
-
-void WriteRegLong(u32 addr, u32 data){
- //printk("[%8x] <= %8x \n\n", addr, data);
- *((volatile u32 *)(addr)) = data;
-}
-
-u32 ReadRegLong (u32 addr) {
- u32 rd_val;
-
- rd_val = *((volatile u32 *)(addr));
- //printk("[%8x] => %8x \n\n", addr, rd_val);
- return rd_val;
-
-}
-
-/* This routine writes the mailbox with the data in an input array */
-void WriteMbox(u32 *mboxarray,u32 size) {
- u32 i;
-
- WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE);
- for (i=0;i<size;i++) {
- WriteRegLong(MEI_DATA_XFR,*(mboxarray+i));
- }
-}
-
-/* This routine reads the output mailbox and places the results into an array */
-void ReadMbox(u32 *mboxarray,u32 size) {
- u32 i;
-
- WriteRegLong(MEI_XFR_ADDR,OMBOX_BASE);
- for (i=0;i<size;i++) {
- mboxarray[i] = ReadRegLong(MEI_DATA_XFR);
- }
-}
-
-void MEIWriteARCValue(u32 address, u32 value)
-{
- u32 i,check = 0;
- /* Write address register */
- *((volatile u32 *)MEI_DEBUG_WAD) = address;
-
- /* Write data register */
- *((volatile u32 *)MEI_DEBUG_DATA) = value;
-
- /* wait until complete - timeout at 40*/
- for (i=0;i<40;i++) {
- check = *((volatile u32 *)ARC_TO_MEI_INT);
- if ((check & 0x20)) break;
- //printk("MEIWriteARCValue: check:%8x\n\n", check);
- }
-
- /* clear the flag */
- *((volatile u32 *)ARC_TO_MEI_INT) = 0x20;
-
-}
-
-
-void post_mei_init(void)
-{
-u32 mailbox[NUM_MB];
-
- mailbox[0] = TIMER_DELAY;
-
- /* set bytes per bearer channel */
- mailbox[1] = BC0_BYTES;
- mailbox[2] = BC1_BYTES;
- WriteMbox(mailbox, 3);
-
- WriteRegLong(AAI_ACCESS, 0x00000001);
-
- /* enable ADSL block clock, ac_clk */
- WriteRegLong(MEI_CONTROL, 0x01);
- WriteRegLong(MEI_DEBUG_DEC, 0x00000001); // select ld/st space
- MEIWriteARCValue(0x31F00, 0x00000010); // write CRI_CCR0 to enable ac_clk
-
- /* set the MTE to register start */
- MEIWriteARCValue(IT_AMODE, 0xF);
- BFMWait(10);
-}
-
-
-int wait_sync(void)
-{
-u32 mailbox[NUM_MB];
- /* wait for ATM sync to be achieved on both BC0 and BC1 */
- u32 timeout=0;
- ReadMbox(mailbox, 1);
- u32 readval = mailbox[0];
- while( ((readval & 0xFFFFFFFF) == 0) && (timeout < TIMEOUT_VALUE) ) {
- BFMWait(1);
- //printk("wait_sync\n\n");
- ReadMbox(mailbox, 1);
- readval = mailbox[0];
- timeout++;
- }
- if(timeout == TIMEOUT_VALUE)return 0;
- else return 1;
-}
-#endif //DFE_LOOPBACK
-//end of TODO, for loopback test
-
-MEI_ERROR meiForceRebootAdslModem(void)
-{
-#if 0
-//#ifdef ARC_READY_ACK
- if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
- {
- return -ERESTARTSYS;
- }
-#endif
- if(reboot_firsttime==1){//000002:fchang Start
- // reset ARC
- *((volatile u32 *)0xB0100910) = 0x80; //reset DFE
- asm("SYNC");
- *((volatile u32 *)0xB0100910) = 0x0;
- asm("SYNC");
- if((*((volatile u32 *)0xB0100910))!=0x0)
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n reset DFE fail");
-#endif
-
- // reset ARC
- meiLongwordWrite(MEI_CONTROL, SOFT_RESET);
- asm("SYNC");
- meiLongwordWrite(MEI_CONTROL, 0);
- asm("SYNC");
-
- } //000002:fchang End
-#ifdef DFE_LOOPBACK
- img_hdr=(ARC_IMG_HDR *)lp_image;
-#else
- img_hdr=(ARC_IMG_HDR *)image_buffer;
-#endif
-// printk("\n\n enter haltarc");
- meiHaltArc();
-// printk("\n\n haltarc done");
-//000002:fchang Start
- if(reboot_firsttime==0){
- printk("\n\n new reboot");
- meiResetArc();
- meiResetCore();
- }
- if(reboot_firsttime==1)
- meiDownloadBootCode();
- else
- mei_ioctl((struct inode *)NULL, (struct file *)NULL, AMAZON_MEI_DOWNLOAD, (unsigned long)NULL);
-
-//000002:fchang End
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n Download Done");
-#endif
-
-#ifdef DFE_LOOPBACK
- post_mei_init();
-#endif
-
-// sema_init(&mei_sema, 1);
- //up(&mei_sema);
-
-// enable_irq(AMAZON_MEI_INT);
-
- meiRunArc();
-//000002:fchang Start
- if(reboot_firsttime==0){
- meiEnalbeMailboxInt();
- }
-//000002:fchang End
-
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n ARC Running");
-#endif
-
-#ifdef AMAZON_MEI_DEBUG_ON //to test ac_clk setting correctness
- {
- u32 arc_control_mode;
- u32 arc_debug_addr = 0x31F00;
- u32 arc_debug_data = 0x10;
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode |= (HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
- meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
- meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data);
-
- meiLongwordRead(MEI_CONTROL, &arc_control_mode);
- arc_control_mode &= ~(HOST_MSTR);
- meiLongwordWrite(MEI_CONTROL, arc_control_mode);
-
-// printk("\n\n ac_clk is %8x\n", arc_debug_data);
- }
-#endif
-
-
-#ifdef DFE_LOOPBACK
- if (wait_sync() == 0){
- printk("ARC fails to run: time out\n\n");
- }else{
-// printk("ARC is ready\n\n");
- }
-#endif
- if(reboot_firsttime==1) //000002:fchang
- reboot_firsttime=0; //000002:fchang
-
- return MEI_SUCCESS;
-}
-
-//////////////////// procfs debug ////////////////////////////////////////////////////////
-#define MEI_DIRNAME "mei"
-static struct proc_dir_entry *meidir;
-
-static ssize_t proc_write(struct file *, const char *, size_t, loff_t *);
-static ssize_t proc_read(struct file *, char *, size_t, loff_t *);
-
-static struct file_operations proc_operations = {
- read: proc_read,
- write: proc_write,
-};
-
-typedef struct reg_entry {
- int * flag;
- char name[30]; // big enough to hold names
- char description[100]; // big enough to hold description
- unsigned short low_ino;
-} reg_entry_t;
-
-static reg_entry_t regs[PROC_ITEMS]; // total items to be monitored by /proc/mei
-
-#define NUM_OF_REG_ENTRY (sizeof(regs)/sizeof(reg_entry_t))
-
-static int proc_read(struct file * file, char * buf, size_t nbytes, loff_t *ppos)
-{
- int i_ino = (file->f_dentry->d_inode)->i_ino;
- char outputbuf[64];
- int count=0;
- int i;
- u32 version=0;
- reg_entry_t* current_reg=NULL;
-
- for (i=0;i<NUM_OF_REG_ENTRY;i++) {
- if (regs[i].low_ino==i_ino) {
- current_reg = &regs[i];
- break;
- }
- }
- if (current_reg==NULL)
- return -EINVAL;
-
- if (current_reg->flag == (int *) 8){
- ///proc/mei/version
- //format:
- //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl
- //Firmware Date Time Code: date/month min:hour
- if (*ppos>0) /* Assume reading completed in previous read*/
- return 0; // indicates end of file
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- //if (indicator_count != 1){
- if (indicator_count < 1){
- up(&mei_sema);
- return -EAGAIN;
- }
- //major:bits 0-7
- //minor:bits 8-15
- makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n WINHOST CMV fail");
-#endif
-#endif
- up(&mei_sema);
- return -EIO;
- }
- version = RxMessage[4];
- count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff);
-
- //sub_version:bits 4-7
- //int_version:bits 0-3
- //spl_appl:bits 8-13
- //rel_state:bits 14-15
- makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n WINHOST CMV fail");
-#endif
-#endif
- up(&mei_sema);
- return -EFAULT;
- }
- version =RxMessage[4];
- count += sprintf(outputbuf+count, "%d.%d.%d.%d",
- (version>>4)&0xf,
- version&0xf,
- (version>>14)&0x3,
- (version>>8)&0x3f);
-#ifdef ADSL_LED_SUPPORT
-// version check -start for adsl led
- if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1;
- else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2;
- else if (((version>>4)&0xf)>2) firmware_support_led=2;
-
-//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash.
- //else firmware_support_led=0;
- else firmware_support_led=2;
-//165001
-
-
-// version check -end
-#endif
- //Date:bits 0-7
- //Month:bits 8-15
- makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n WINHOST CMV fail");
-#endif
-#endif
- up(&mei_sema);
- return -EIO;
- }
- version = RxMessage[4];
-
- //Hour:bits 0-7
- //Minute:bits 8-15
- makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#if 0
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n WINHOST CMV fail");
-#endif
-#endif
- up(&mei_sema);
- return -EFAULT;
- }
- version += (RxMessage[4]<<16);
- count += sprintf(outputbuf+count, " %d/%d %d:%d\n"
- ,version&0xff
- ,(version>>8)&0xff
- ,(version>>25)&0xff
- ,(version>>16)&0xff);
-
- up(&mei_sema);
-
- *ppos+=count;
- }else if(current_reg->flag != (int *)Recent_indicator){
- if (*ppos>0) /* Assume reading completed in previous read*/
- return 0; // indicates end of file
- count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag));
- *ppos+=count;
- if (count>nbytes) /* Assume output can be read at one time */
- return -EINVAL;
- }else{
- if((int)(*ppos)/((int)7)==16)
- return 0; // indicate end of the message
- count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7)));
- *ppos+=count;
- }
- if (copy_to_user(buf, outputbuf, count))
- return -EFAULT;
- return count;
-}
-
-static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos)
-{
- int i_ino = (file->f_dentry->d_inode)->i_ino;
- reg_entry_t* current_reg=NULL;
- int i;
- unsigned long newRegValue;
- char *endp;
-
- for (i=0;i<NUM_OF_REG_ENTRY;i++) {
- if (regs[i].low_ino==i_ino) {
- current_reg = &regs[i];
- break;
- }
- }
- if ((current_reg==NULL) || (current_reg->flag == (int *)Recent_indicator))
- return -EINVAL;
-
- newRegValue = simple_strtoul(buffer,&endp,0);
- *(current_reg->flag)=(int)newRegValue;
- return (count+endp-buffer);
-}
-////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
-void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data)
-{
- memset(TxMessage, 0, MSG_LENGTH*2);
- TxMessage[0]= (opcode<<4) + (size&0xf);
- TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f);
- TxMessage[2]= address;
- TxMessage[3]= index;
- if(opcode == H2D_CMV_WRITE)
- memcpy(TxMessage+4, data, size*2);
- return;
-}
-
-////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
-void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG)
-{
- memset(CMVMSG, 0, MSG_LENGTH*2);
- CMVMSG[0]= (opcode<<4) + (size&0xf);
- CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f);
- CMVMSG[2]= address;
- CMVMSG[3]= index;
- if(opcode == H2D_CMV_WRITE)
- memcpy(CMVMSG+4, data, size*2);
- return;
-}
-
-//////////////// Driver Structure /////////////////////////////////////////////////////////////////////////////
-static ssize_t mei_write(struct file *, const char *, size_t, loff_t *);
-static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-
-static struct file_operations mei_operations = {
- write: mei_write,
- ioctl: mei_ioctl,
-};
-
-
-static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff)
-{
-// printk("\n\n mei_write entered");
-// image_buffer = (u32 *)kmalloc(size, GFP_KERNEL);
- image_buffer = (u32 *)vmalloc(size);
-// printk("\n\n image_buffer kmalloc done");
- if(image_buffer == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n kmalloc for firmware image fail");
- printk("\n\n vmalloc for firmware image fail");
-#endif
- return -1;
- }
- copy_from_user((char *)image_buffer, buf, size);
-// printk("\n\n copy_from_user done");
- return size;
-}
-
- ////////// ISR GPTU Timer 6 for high resolution timer /////////////
-void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs)
-{
- int i,j;
- u32 temp;
- u16 temp16;
- u16 rdindex, wrindex;
- u16 num_rd=0; //num of byte can be read
- u16 bytes_to_wr=0;
-
-// printk("\n\nenter timer\n\n");
- irqtimes++;
-// printk("\n%d\n",irqtimes);
-
-
-/*
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_8(0x30f20, &temp, 1);
-#else
- meiDMARead_8(0x30f20, &temp, 1);
-#endif
- if((temp&0x4000)!=0){
- printk("\nER_ERR");
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_8(0x30f20, &temp, 1);
-#else
- meiDMAWrite_8(0x30f20, &temp, 1);
-#endif
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_8(0x30f20, &temp, 1);
-#else
- meiDMARead_8(0x30f20, &temp, 1);
-#endif
- if((temp&0x4000)!=0)
- printk("\nER_ERR not cleared");
- }
-*/
-
- for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
- wrindex = (u16)((temp & 0xffff0000)>>16);
-// printk(" %d",wrindex);
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
-#endif
- rdindex = (u16)(temp & 0xffff);
-// printk(" %d",rdindex);
- if(rdindex<=wrindex)
- num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes
- else
- num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4; //read multiply of 4 bytes
-
- if(i%2!=0){//rx channel
- pcm_data[i].point=0;
- for(j=0;j<num_rd/4;j++){
- if(pcm_data[i].finish!=1){
- if((rdindex+j*4)>=pcm_data[i].len)
- temp16=(rdindex+j*4) - pcm_data[i].len;
- else
- temp16=rdindex+j*4;
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#else
- meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#endif
- // printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point)));
- /* if(pcm_data[i].point==0){
- if(pcm_data[i].buff[0]==0xA5){// start of loopback data
- pcm_data[i].point+=4;
- printk("\nstart receive data");
- }
- }
- else*/
- pcm_data[i].point+=4;
- /* if(pcm_data[i].point==PCM_BUFF_SIZE){ //finish rx
- pcm_data[i].finish=1;
- printk("\nchannel[%d] finished", i);
- } */
- }
- }
- if(firsttime[i]==1){
- for(j=0;j<num_rd;j++){
- if(pcm_data[i].buff[j]==0x1){
- num_cmp[i]=num_rd-j;
- firsttime[i]=0;
- break;
- }
- }
- if(memcmp(sampledata+1, pcm_data[i].buff+j, num_cmp[i])!=0)
- printk("\n\ndata wrong,1st\n\n");
- else
- pcm_start_loc[i] = num_cmp[i]+1;
- }
- else{
- if(memcmp(sampledata+pcm_start_loc[i], pcm_data[i].buff, num_rd)!=0)
- printk("\n\ndata wrong\n\n");
- else{
- pcm_start_loc[i]+=num_rd;
- if(pcm_start_loc[i]>=256)
- pcm_start_loc[i]=pcm_start_loc[i]-256;
- }
- }
-
- rdindex +=num_rd;
- if(rdindex>=pcm_data[i].len)
- rdindex=rdindex-pcm_data[i].len;
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1);
-#endif
- temp= (temp & 0xffff0000) + rdindex;
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex
-#else
- meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex
-#endif
-
- bytes_to_wr = num_rd;
-
- // if(bytes_to_wr>0){
- // printk(" %d", num_rd);
- // printk(" %d", rdindex);
-// printk("\n\nrdindex = %d", rdindex);
- //}
- }
- else{ //tx channel
- // if((bytes_to_wr + num_rd) < pcm_data[i].len){
- for(j=0;j<bytes_to_wr/4;j++){
- if(pcm_data[i].finish!=1){
- if((wrindex+j*4)>=pcm_data[i].len)
- temp16=(wrindex+j*4) - pcm_data[i].len;
- else
- temp16=wrindex + j*4;
-/*
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
-#else
- meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1);
-#endif*/
-
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
- // meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1);
-#else
- meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1);
-#endif
- pcm_data[i].point+=4;
- if(pcm_data[i].point==PCM_BUFF_SIZE){
- // pcm_data[i].finish=1;
- // printk("\nchannel[%d] finished", i);
- pcm_data[i].point=0;
- }
- }
- }
- wrindex+=bytes_to_wr;
- if(wrindex>=pcm_data[i].len)
- wrindex=wrindex-pcm_data[i].len;
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
- temp=(temp&0xffff) + (wrindex<<16);
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
-#else
- meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex
-#endif
-
- //if(bytes_to_wr>0){
- // printk(" %d", bytes_to_wr);
- // printk(" %d", wrindex);
-// printk("\n\nwrindex = %d", wrindex);
- //}
- // }
- }
- }
- return;
-}
-//000002:fchang Start
-static int meiResetArc(void)
-{
- u32 auxreg0;
- u32 auxreg5;
- int flshcnt=0;
- int flshcnt1=0;
- int flshcnt2=0;
-
- meiLongwordWrite(MEI_CONTROL, 1);
- meiLongwordWrite(MEI_DEBUG_DEC, 3);
- meiLongwordWrite(MEI_DEBUG_WAD, 0x3c);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x10);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
- meiLongwordWrite(MEI_DEBUG_WAD, 0x2);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_WAD, 0x3);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
- meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
- auxreg0 = auxreg0 & 0x03ffffff;
- meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
- meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_WAD, 0x10a);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
- meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff);
- meiPollForDbgDone();
- while(flshcnt<3){
- meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
- meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
- auxreg0 = auxreg0 & 0xff000000;
- auxreg0 = auxreg0 | 0x3fff;
- meiLongwordWrite(MEI_DEBUG_WAD, 0x0);
- meiLongwordWrite(MEI_DEBUG_DATA, auxreg0);
- meiPollForDbgDone();
-
- meiLongwordWrite(MEI_DEBUG_DEC, 0x0);
- meiLongwordWrite(MEI_DEBUG_RAD, 0x5);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &auxreg5);
- auxreg5 = auxreg5 | 0x801;
- meiLongwordWrite(MEI_DEBUG_WAD, 0x5);
- meiLongwordWrite(MEI_DEBUG_DATA, auxreg5);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_RAD, 0x0);
- meiPollForDbgDone();
- meiLongwordRead(MEI_DEBUG_DATA, &auxreg0);
- auxreg0 = auxreg0 & 0x00ffffff;
- if(auxreg0 == 0x4000)
- flshcnt = flshcnt+1;
- else{
- if(flshcnt == 0)
- flshcnt1 = flshcnt1 +1;
- else
- flshcnt2 = flshcnt2 +1;
- }
- }
-
- return 1;
-}
-
-static int meiResetCore(void)
-{
- meiLongwordWrite(MEI_CONTROL, 0x1);
- meiLongwordWrite(MEI_DEBUG_DEC, 0x2);
- meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
- meiLongwordWrite(MEI_DEBUG_DATA, 0xf);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x0);
- meiPollForDbgDone();
- meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00);
- meiLongwordWrite(MEI_DEBUG_DATA, 0x55);
- meiPollForDbgDone();
- return 1;
-}
-
-static int meiEnalbeMailboxInt(void)
-{
- u32 arc2meiintmsk;
- meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk);
- arc2meiintmsk = arc2meiintmsk | 0x1;
- meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk);
- meiLongwordWrite(MEI_CONTROL, 0x0);
- return 1;
-}
-
-
-
-//000002:fchang End
-
-static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon)
-{
- int i,k;
- u32 boot_loop;
- u32 page_size;
- u32 dest_addr;
- u32 j;
- u32 temp;
- u32 temp2;
- u16 trapsflag=0;
- amazon_clreoc_pkt * current_clreoc;
- struct timeval time_now;
- struct timeval time_fini;
- struct list_head * ptr;
- amazon_mei_mib * mib_ptr;
-// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
- structpts pts;
- int meierr=MEI_SUCCESS;
- u16 data[12]; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
- meireg regrdwr;
- meidebug debugrdwr;
- amazon_mei_mib * temp_intvl;
- struct sk_buff * eoc_skb;
-// 603221:tc.chen start
- u16 hdlc_cmd[2];
- u16 hdlc_rx_buffer[32];
- int hdlc_rx_len=0;
-// 603221:tc.chen end
-
- int from_kernel = 0;//joelin
- if (ino == (struct inode *)0) from_kernel = 1;//joelin
-
-// printk("\n switch.command = %i\n", command);
- switch(command){
- case GET_ADSL_LINE_CODE:
- pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry));
- if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){
- pts.adslLineTableEntry_pt->adslLineCode = 2;
- }
- copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry));
- kfree(pts.adslLineTableEntry_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ATUC_LINE_EXT:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
- if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){
- ATUC_LINE_TRANS_CAP_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);
- }
- else{
- memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
- ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);
- }
- else{
- memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){
- ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 2 Address 1 Index 0");
-#endif
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);
- }
- else{
- memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){ // not supported currently
-/*
- LINE_GLITE_POWER_STATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 2 Address 0 Index 0");
-#endif
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
- }
- else{
- memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
-*/
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
- }
- copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
- kfree(pts.adslLineTableEntry_pt);
- up(&mei_sema);
- break;
-#endif
-
-#ifdef AMAZON_MEI_MIB_RFC3440
- case SET_ADSL_ATUC_LINE_EXT:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry));
-
- //only adslLineTransAtucConfig can be set.
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG);
- if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){
- memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2);
- ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 67 Index 0");
-#endif
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG);
- }
- }
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG);
- CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG);
-
- copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry));
- kfree(pts.adslLineTableEntry_pt);
- up(&mei_sema);
- break;
-#endif
-
- case GET_ADSL_ATUC_PHY:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry));
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){
- ATUC_PHY_SER_NUM_FLAG_MAKECMV1;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 57 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);
- }
- else{
- memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- ATUC_PHY_SER_NUM_FLAG_MAKECMV2;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 57 Index 12");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG);
- }
- else{
- memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){
- ATUC_PHY_VENDOR_ID_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 64 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG);
- }
- else{
- memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){
- ATUC_PHY_VER_NUM_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 58 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG);
- }
- else{
- memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){
- pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus;
- }
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){
- ATUC_CURR_OUT_PWR_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 68 Index 5");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG);
- }
- else{
- memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){
- ATUC_CURR_ATTR_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 69 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG);
- }
- else{
- memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry));
- kfree(pts.adslAtucPhysEntry_pt);
-
- up(&mei_sema);
- break;
- case GET_ADSL_ATUR_PHY:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry));
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){
- ATUR_PHY_SER_NUM_FLAG_MAKECMV1;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 62 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);
- }
- else{
- memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- ATUR_PHY_SER_NUM_FLAG_MAKECMV2;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 62 Index 12");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG);
- }
- else{
- memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){
- ATUR_PHY_VENDOR_ID_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 65 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG);
- }
- else{
- memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){
- ATUR_PHY_VER_NUM_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 61 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG);
- }
- else{
- memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){
- ATUR_SNRMGN_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 68 Index 4");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG);
- }
- else{
- memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){
- ATUR_ATTN_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 68 Index 2");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG);
- }
- else{
- memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){
- pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus;
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){
- ATUR_CURR_OUT_PWR_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 69 Index 5");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG);
- }
- else{
- memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){
- ATUR_CURR_ATTR_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 68 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG);
- }
- else{
- memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry));
- kfree(pts.adslAturPhysEntry_pt);
-
- up(&mei_sema);
- break;
- case GET_ADSL_ATUC_CHAN_INFO:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo));
- if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){
- if((chantype.interleave!=1) || (chantype.fast==1)){
- CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);
- }
- else{
- ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 3 Index 1");
-#endif
- CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG);
- }
- else{
- memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){
- ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG);
- }
- else{
- pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
- if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){
- pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate;
- }
- copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo));
- kfree(pts.adslAtucChanInfo_pt);
-
- up(&mei_sema);
- break;
- case GET_ADSL_ATUR_CHAN_INFO:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo));
- if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){
- if((chantype.interleave!=1) || (chantype.fast==1)){
- CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);
- }
- else{
- ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 2 Index 1");
-#endif
- CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG);
- }
- else{
- memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2));
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){
- ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
- CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG);
- }
- else{
- pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
- if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){
- pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate;
- }
- if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){
- // ? no CMV to update this
- CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG);
- }
- copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo));
- kfree(pts.adslAturChanInfo_pt);
-
- up(&mei_sema);
- break;
- case GET_ADSL_ATUC_PERF_DATA:
- pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL);
- copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry));
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==96)
- break;
- }
- pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
- do_gettimeofday(&time_now);
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i+=900;
- }
- do_gettimeofday(&time_now);
- i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- if(i>=86400)
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfLof;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfLof;
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfLos;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfLos;
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfEs;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfEs;
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfInit;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfInit;
- pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){
- i=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- i++;
- }
- if(i>=96)
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfLof;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfLos;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfEs;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfInit;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j;
- else
- pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0;
- }
-
- copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry));
- kfree(pts.atucPerfDataEntry_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ATUC_PERF_DATA_EXT: //??? CMV mapping not available
- pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL);
- copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry));
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatFastR;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfStatFastR;
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatFailedFastR;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfStatFailedFastR;
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatSesL;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfStatSesL;
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatUasL;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AtucPerfStatUasL;
- pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatFastR;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j;
- else
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatFailedFastR;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j;
- else
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatSesL;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j;
- else
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0;
- }
- if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AtucPerfStatUasL;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j;
- else
- pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0;
- }
- copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry));
- kfree(pts.atucPerfDataExtEntry_pt);
- break;
-#endif
- case GET_ADSL_ATUR_PERF_DATA:
- pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL);
- copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry));
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==96)
- break;
- }
- pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
- do_gettimeofday(&time_now);
- pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){
- pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i+=900;
- }
- do_gettimeofday(&time_now);
- i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- if(i>=86400)
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLof;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfLof;
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLos;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfLos;
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLpr;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfLpr;
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfEs;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfEs;
- pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){
- i=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- i++;
- }
- if(i>=96)
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLof;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLos;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfLpr;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfEs;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j;
- else
- pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0;
- }
-
- copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry));
- kfree(pts.aturPerfDataEntry_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ATUR_PERF_DATA_EXT:
- pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL);
- copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry));
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){
- pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){
- pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){
- pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){
- pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfStatSesL;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfStatSesL;
- pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfStatUasL;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturPerfStatUasL;
- pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfStatSesL;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j;
- else
- pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0;
- }
- if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturPerfStatUasL;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j;
- else
- pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0;
- }
- copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry));
- kfree(pts.aturPerfDataExtEntry_pt);
- break;
-#endif
- case GET_ADSL_ATUC_INTVL_INFO:
- pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo));
-
- if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){
- pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS;
- pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS;
- pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS;
- pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS;
- pts.adslAtucIntvlInfo_pt->intervalValidData = 1;
- }
- else{
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){
- temp_intvl = list_entry(ptr, amazon_mei_mib, list);
- pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof;
- pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos;
- pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs;
- pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit;
- pts.adslAtucIntvlInfo_pt->intervalValidData = 1;
- break;
- }
- }
- if(ptr==&interval_list){
- pts.adslAtucIntvlInfo_pt->intervalValidData = 0;
- pts.adslAtucIntvlInfo_pt->flags = 0;
- pts.adslAtucIntvlInfo_pt->intervalLOF = 0;
- pts.adslAtucIntvlInfo_pt->intervalLOS = 0;
- pts.adslAtucIntvlInfo_pt->intervalES = 0;
- pts.adslAtucIntvlInfo_pt->intervalInits = 0;
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo));
- kfree(pts.adslAtucIntvlInfo_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ATUC_INTVL_EXT_INFO:
- pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo));
- if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL;
-// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;
- }
- else{
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){
- temp_intvl = list_entry(ptr, amazon_mei_mib, list);
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL;
-// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1;
- break;
- }
- }
- if(ptr==&interval_list){
-// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0;
- pts.adslAtucInvtlExtInfo_pt->flags = 0;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0;
- pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0;
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo));
- kfree(pts.adslAtucInvtlExtInfo_pt);
- break;
-#endif
- case GET_ADSL_ATUR_INTVL_INFO:
- pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo));
-
- if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){
- pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS;
- pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS;
- pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS;
- pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR;
- pts.adslAturIntvlInfo_pt->intervalValidData = 1;
- }
- else{
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){
- temp_intvl = list_entry(ptr, amazon_mei_mib, list);
- pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof;
- pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos;
- pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs;
- pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr;
- pts.adslAturIntvlInfo_pt->intervalValidData = 1;
- break;
- }
- }
- if(ptr==&interval_list){
- pts.adslAturIntvlInfo_pt->intervalValidData = 0;
- pts.adslAturIntvlInfo_pt->flags = 0;
- pts.adslAturIntvlInfo_pt->intervalLOF = 0;
- pts.adslAturIntvlInfo_pt->intervalLOS = 0;
- pts.adslAturIntvlInfo_pt->intervalES = 0;
- pts.adslAturIntvlInfo_pt->intervalLPR = 0;
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo));
- kfree(pts.adslAturIntvlInfo_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ATUR_INTVL_EXT_INFO:
- pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo));
-
- if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL;
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL;
-// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
- }
- else{
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){
- temp_intvl = list_entry(ptr, amazon_mei_mib, list);
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL;
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL;
-// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1;
- break;
- }
- }
- if(ptr==&interval_list){
-// pts.adslAturInvtlExtInfo_pt->intervalValidData = 0;
- pts.adslAturInvtlExtInfo_pt->flags = 0;
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0;
- pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0;
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo));
- kfree(pts.adslAturInvtlExtInfo_pt);
- break;
-#endif
- case GET_ADSL_ATUC_CHAN_PERF_DATA:
- pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL);
- copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry));
-
- pts.atucChannelPerfDataEntry_pt->flags = 0;
-
- copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry));
- kfree(pts.atucChannelPerfDataEntry_pt);
- break;
- case GET_ADSL_ATUR_CHAN_PERF_DATA:
- pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL);
- copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry));
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==96)
- break;
- }
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){
- do_gettimeofday(&time_now);
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i+=900;
- }
- do_gettimeofday(&time_now);
- i+=time_now.tv_sec - (current_intvl->start_time).tv_sec;
- if(i>=86400)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfRxBlk;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturChanPerfRxBlk;
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfTxBlk;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturChanPerfTxBlk;
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfCorrBlk;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturChanPerfCorrBlk;
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfUncorrBlk;
- i++;
- if(i==96)
- j=0;
- }
- j+=current_intvl->AturChanPerfUncorrBlk;
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){
- i=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- i++;
- }
- if(i>=96)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfRxBlk;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfTxBlk;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfCorrBlk;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0;
- }
- if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){
- i=0;
- j=0;
- for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){
- mib_ptr = list_entry(ptr, amazon_mei_mib, list);
- j+=mib_ptr->AturChanPerfUncorrBlk;
- i++;
- if(i==96)
- break;
- }
- if(i==96)
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j;
- else
- pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0;
- }
-
- copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry));
- kfree(pts.aturChannelPerfDataEntry_pt);
- break;
- case GET_ADSL_ATUC_CHAN_INTVL_INFO:
- pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo));
-
- pts.adslAtucChanIntvlInfo_pt->flags = 0;
-
- copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo));
- kfree(pts.adslAtucChanIntvlInfo_pt);
- break;
- case GET_ADSL_ATUR_CHAN_INTVL_INFO:
- pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo));
-
- if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){
- pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK;
- pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK;
- pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK;
- pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK;
- pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
- }
- else{
- i=0;
- for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){
- i++;
- if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){
- temp_intvl = list_entry(ptr, amazon_mei_mib, list);
- pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk;
- pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk;
- pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk;
- pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk;
- pts.adslAturChanIntvlInfo_pt->intervalValidData = 1;
- break;
- }
- }
- if(ptr==&interval_list){
- pts.adslAturChanIntvlInfo_pt->intervalValidData = 0;
- pts.adslAturChanIntvlInfo_pt->flags = 0;
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo));
- kfree(pts.adslAturChanIntvlInfo_pt);
- break;
- case GET_ADSL_ALRM_CONF_PROF:
- pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
-
- strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32);
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
- pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus;
- }
- copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
- kfree(pts.adslLineAlarmConfProfileEntry_pt);
- break;
-#ifdef AMAZON_MEI_MIB_RFC3440
- case GET_ADSL_ALRM_CONF_PROF_EXT:
- pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
- pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
- pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
- pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
- pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
- pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL;
- }
- copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
- kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
- break;
-#endif
- case SET_ADSL_ALRM_CONF_PROF:
- pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry));
-
- strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32);
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){
- AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){
- AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){
- AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){
- AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){
- AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){
- AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
- AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){
- AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){
- AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){
- AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){
- AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){
- AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){
- AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){
- AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){
- AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){
- AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){
- AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus;
- }
- copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry));
- kfree(pts.adslLineAlarmConfProfileEntry_pt);
- break;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
- case SET_ADSL_ALRM_CONF_PROF_EXT:
- pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry));
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){
- AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){
- AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){
- AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){
- AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL;
- }
- if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){
- AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL;
- }
- copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry));
- kfree(pts.adslLineAlarmConfProfileExtEntry_pt);
- break;
-#endif
-
- case ADSL_ATUR_TRAPS:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- trapsflag=0;
- if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs)
- trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG;
- if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss)
- trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG;
- if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs)
- trapsflag|=ATUC_PERF_ESS_THRESH_FLAG;
- if(chantype.fast==1){
- if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){
- ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
- }
- else{
- temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){
- trapsflag|=ATUC_RATE_CHANGE_FLAG;
- PrevTxRate.adslAtucChanPrevTxRate = temp;
- }
- if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){
- trapsflag|=ATUC_RATE_CHANGE_FLAG;
- PrevTxRate.adslAtucChanPrevTxRate = temp;
- }
- }
- }
- }
- if(chantype.interleave==1){
- if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){
- ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
- }
- else{
- temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){
- trapsflag|=ATUC_RATE_CHANGE_FLAG;
- PrevTxRate.adslAtucChanPrevTxRate = temp;
- }
- if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){
- trapsflag|=ATUC_RATE_CHANGE_FLAG;
- PrevTxRate.adslAtucChanPrevTxRate = temp;
- }
- }
- }
- }
- if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs)
- trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG;
- if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss)
- trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG;
- if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs)
- trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG;
- if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs)
- trapsflag|=ATUR_PERF_ESS_THRESH_FLAG;
- if(chantype.fast==1){
- if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){
- ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
- }
- else{
- temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){
- trapsflag|=ATUR_RATE_CHANGE_FLAG;
- PrevTxRate.adslAturChanPrevTxRate = temp;
- }
- if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){
- trapsflag|=ATUR_RATE_CHANGE_FLAG;
- PrevTxRate.adslAturChanPrevTxRate = temp;
- }
- }
- }
- }
- if(chantype.interleave==1){
- if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){
- ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
- }
- else{
- temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){
- trapsflag|=ATUR_RATE_CHANGE_FLAG;
- PrevTxRate.adslAturChanPrevTxRate = temp;
- }
- if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){
- trapsflag|=ATUR_RATE_CHANGE_FLAG;
- PrevTxRate.adslAturChanPrevTxRate = temp;
- }
- }
- }
- }
- copy_to_user((char *)lon, (char *)(&trapsflag), 2);
-
- up(&mei_sema);
- break;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
- case ADSL_ATUR_EXT_TRAPS:
- trapsflag=0;
- if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR)
- trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG;
- if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL)
- trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG;
- if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL)
- trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG;
- if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL)
- trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG;
- if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL)
- trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG;
- copy_to_user((char *)lon, (char *)(&trapsflag), 2);
- break;
-#endif
-
-// 603221:tc.chen start
- case GET_ADSL_LINE_STATUS:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo));
-
- if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){
- LINE_STAT_MODEM_STATUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 0 Index 0");
-#endif
- pts.adslLineStatusInfo_pt->adslModemStatus = 0;
- }
- else{
- pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){
- LINE_STAT_MODE_SEL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
- pts.adslLineStatusInfo_pt->adslModeSelected = 0;
- }
- else{
- pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){
- LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group OPTN Address 2 Index 0");
-#endif
- pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0;
- }
- else{
-
- pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){
- LINE_STAT_LATENCY_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 12 Index 0");
-#endif
- pts.adslLineStatusInfo_pt->adslLatency = 0;
- }
- else{
- pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4];
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo));
- kfree(pts.adslLineStatusInfo_pt);
-
- up(&mei_sema);
- break;
-
-
- case GET_ADSL_LINE_RATE:
- if (showtime!=1)
- return -ERESTARTSYS;
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo));
-
- if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- if (chantype.interleave)
- LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV;
- else
- LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV;
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group RATE Address 1 Index 0");
-#endif
- pts.adslLineRateInfo_pt->adslDataRateds = 0;
- }
- else{
- pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }else // adsl 2/2+
- {
- unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
- Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
- //// up stream data rate
-
- if (chantype.interleave)
- {
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 25 Index 0");
-#endif
- Lp = 0;
- }else
- Lp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 23 Index 0");
-#endif
- Rp = 0;
- }else
- Rp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 24 Index 0");
-#endif
- Mp = 0;
- }else
- Mp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 26 Index 0");
-#endif
- Tp = 0;
- }else
- Tp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 28 Index 0");
-#endif
- Kp = 0;
- }else
- {
- Kp=RxMessage[4]+ RxMessage[5]+1;
- Bpn=RxMessage[4]+ RxMessage[5];
- }
- }else
- {
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 25 Index 1");
-#endif
- Lp = 0;
- }else
- Lp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 23 Index 1");
-#endif
- Rp = 0;
- }else
- Rp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 24 Index 1");
-#endif
- Mp = 0;
- }else
- Mp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 26 Index 1");
-#endif
- Tp = 0;
- }else
- Tp=RxMessage[4];
-
- LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 28 Index 2");
-#endif
- Kp = 0;
- }else
- {
- Kp=RxMessage[4]+ RxMessage[5]+1;
- Bpn=RxMessage[4]+ RxMessage[5];
- }
- }
- DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
- //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
- //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain;
- pts.adslLineRateInfo_pt->adslDataRateds = DataRate;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- if (chantype.interleave)
- LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV;
- else
- LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV;
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
- #ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group RATE Address 0 Index 0");
- #endif
- pts.adslLineRateInfo_pt->adslDataRateus = 0;
- }
- else{
- pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }else // adsl 2/2+
- {
- unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain;
- Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0;
- //// down stream data rate
-
- if (chantype.interleave)
- {
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 14 Index 0");
-#endif
- Lp = 0;
- }else
- Lp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 12 Index 0");
-#endif
- Rp = 0;
- }else
- Rp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 13 Index 0");
-#endif
- Mp = 0;
- }else
- Mp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 15 Index 0");
-#endif
- Tp = 0;
- }else
- Tp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 17 Index 0");
-#endif
- Kp = 0;
- }else
- {
- Kp=RxMessage[4]+ RxMessage[5]+1;
- Bpn=RxMessage[4]+ RxMessage[5];
- }
- }else
- {
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 14 Index 1");
-#endif
- Lp = 0;
- }else
- Lp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 12 Index 1");
-#endif
- Rp = 0;
- }else
- Rp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 13 Index 1");
-#endif
- Mp = 0;
- }else
- Mp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 15 Index 1");
-#endif
- Tp = 0;
- }else
- Tp=RxMessage[4];
-
- LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 17 Index 2");
-#endif
- Kp = 0;
- }else
- {
- Kp=RxMessage[4]+ RxMessage[5]+1;
- Bpn=RxMessage[4]+ RxMessage[5];
- }
- }
- DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp));
- //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp));
- //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain;
- pts.adslLineRateInfo_pt->adslDataRateus = DataRate;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){
- LINE_RATE_ATTNDRDS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 68 Index 4");
-#endif
- pts.adslLineRateInfo_pt->adslATTNDRds = 0;
- }
- else{
- pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- LINE_RATE_ATTNDRUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
- #ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 69 Index 4");
- #endif
- pts.adslLineRateInfo_pt->adslATTNDRus = 0;
- }
- else{
- pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x24;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_RATE_END;
- }
- pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_RATE_END;
- }
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo));
- up(&mei_sema);
-
-GET_ADSL_LINE_RATE_END:
- kfree(pts.adslLineRateInfo_pt);
- break;
-
- case GET_ADSL_LINE_INFO:
- if (showtime!=1)
- return -ERESTARTSYS;
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo));
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){
- if (chantype.interleave)
- LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV;
- else
- LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV;
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 27 Index 0");
-#endif
- pts.adslLineInfo_pt->adslInterleaveDepthds = 0;
- }
- else{
- pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){
- if (chantype.interleave)
- LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV;
- else
- LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV;
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group CNFG Address 16 Index 0");
-#endif
- pts.adslLineInfo_pt->adslInterleaveDepthus = 0;
- }
- else{
- pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){
- LINE_INFO_LATNDS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 68 Index 1");
-#endif
- pts.adslLineInfo_pt->adslLATNds = 0;
- }
- else{
- pts.adslLineInfo_pt->adslLATNds = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- LINE_INFO_LATNUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 69 Index 1");
-#endif
- pts.adslLineInfo_pt->adslLATNus = 0;
- }
- else{
- pts.adslLineInfo_pt->adslLATNus = RxMessage[4];
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x21;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){
- LINE_INFO_SATNDS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 68 Index 2");
-#endif
- pts.adslLineInfo_pt->adslSATNds = 0;
- }
- else{
- pts.adslLineInfo_pt->adslSATNds = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- LINE_INFO_SATNUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 69 Index 2");
-#endif
- pts.adslLineInfo_pt->adslSATNus = 0;
- }
- else{
- pts.adslLineInfo_pt->adslSATNus = RxMessage[4];
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x22;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode
- {
- LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV;
- }
- else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0)
- {
- LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV;
- }
- else
- {
- LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV;
- }
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 68 Index 3");
-#endif
- pts.adslLineInfo_pt->adslSNRMds = 0;
- }
- else{
- if (adsl_mode>8 || adsl_mode_extend>0)
- {
- int SNRMds,SNRMds_remain;
- SNRMds=RxMessage[4];
- SNRMds_remain=((SNRMds&0xff)*1000)/256;
- SNRMds=(SNRMds>>8)&0xff;
- if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1;
- else SNRMds_remain=(SNRMds_remain/100);
- pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain;
- }else
- {
- pts.adslLineInfo_pt->adslSNRMds = RxMessage[4];
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend == 0)
- {
- LINE_INFO_SNRMNUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 69 Index 3");
-#endif
- pts.adslLineInfo_pt->adslSNRMus = 0;
- }
- else{
- pts.adslLineInfo_pt->adslSNRMus = RxMessage[4];
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x23;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend == 0)
- {
- LINE_INFO_ACATPDS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
- #ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 68 Index 6");
- #endif
- pts.adslLineInfo_pt->adslACATPds = 0;
- }
- else{
- pts.adslLineInfo_pt->adslACATPds = RxMessage[4];
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x25;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){
- if (adsl_mode <=8 && adsl_mode_extend == 0)
- {
- LINE_INFO_ACATPUS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 69 Index 6");
-#endif
- pts.adslLineInfo_pt->adslACATPus = 0;
- }
- else{
- pts.adslLineInfo_pt->adslACATPus = RxMessage[4];
- }
- }else
- {
- hdlc_cmd[0]=0x0181;
- hdlc_cmd[1]=0x26;
- up(&mei_sema);
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]);
- }
- if(down_interruptible(&mei_sema))
- {
- meierr = -ERESTARTSYS;
- goto GET_ADSL_LINE_INFO_END;
- }
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo));
- up(&mei_sema);
-
-GET_ADSL_LINE_INFO_END:
- kfree(pts.adslLineInfo_pt);
- break;
-
- case GET_ADSL_NEAREND_STATS:
- if (showtime!=1)
- return -ERESTARTSYS;
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL);
- copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats));
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){
- NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 20 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]);
- }
- NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 21 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslSuperFrames = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16);
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) ||
- IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) ||
- IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) ||
- IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) ||
- IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){
- NEAREND_PERF_LOS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 0 Index 0");
-#endif
- RxMessage[4] = 0;
- }
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){
- if( (RxMessage[4]&0x1) == 0x1)
- pts.adslNearEndPerfStats_pt->adslneLOS = 1;
- else
- pts.adslNearEndPerfStats_pt->adslneLOS = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){
- if( (RxMessage[4]&0x2) == 0x2)
- pts.adslNearEndPerfStats_pt->adslneLOF = 1;
- else
- pts.adslNearEndPerfStats_pt->adslneLOF = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){
- if( (RxMessage[4]&0x4) == 0x4)
- pts.adslNearEndPerfStats_pt->adslneLPR = 1;
- else
- pts.adslNearEndPerfStats_pt->adslneLPR = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){
- pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3;
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){
- pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){
- if (chantype.interleave)
- NEAREND_PERF_CRC_FLAG_LP0_MAKECMV;
- else
- NEAREND_PERF_CRC_FLAG_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 2 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneCRC = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){
- if (chantype.interleave)
- NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
- else
- NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 3 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneRSCorr = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){
- NEAREND_PERF_FECS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 6 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneFECS = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){
- NEAREND_PERF_ES_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 7 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneES = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){
- NEAREND_PERF_SES_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 8 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneSES = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){
- NEAREND_PERF_LOSS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 9 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneLOSS = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){
- NEAREND_PERF_UAS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 10 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneUAS = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4];
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){
- if (chantype.bearchannel0)
- {
- NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
- }else if (chantype.bearchannel1)
- {
- NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
- }
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 11 Index 0");
-#endif
- pts.adslNearEndPerfStats_pt->adslneHECErrors = 0;
- }
- else{
- pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats));
- kfree(pts.adslNearEndPerfStats_pt);
-
- up(&mei_sema);
- break;
-
- case GET_ADSL_FAREND_STATS:
-
- if (showtime!=1)
- return -ERESTARTSYS;
-
- if (adsl_mode>8 || adsl_mode_extend > 0)
- {
- do_gettimeofday(&time_now);
- if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1)
- {
- hdlc_cmd[0]=0x105;
-
- if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- hdlc_rx_len=0;
- hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2);
- if (hdlc_rx_len <=0)
- {
- return -ERESTARTSYS;
- }
- FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]);
- FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]);
- FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]);
- FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]);
- FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]);
- FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]);
- FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]);
- do_gettimeofday(&FarendData_acquire_time);
- }
-
- }
- }
-
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL);
- copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats));
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) ||
- IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) ||
- IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) ||
- IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) ||
- IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){
- FAREND_PERF_LOS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 1 Index 0");
-#endif
- RxMessage[4] = 0;
- }
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){
- if((RxMessage[4]&0x1) == 0x1)
- pts.adslFarEndPerfStats_pt->adslfeLOS = 1;
- else
- pts.adslFarEndPerfStats_pt->adslfeLOS = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){
- if((RxMessage[4]&0x2) == 0x2)
- pts.adslFarEndPerfStats_pt->adslfeLOF = 1;
- else
- pts.adslFarEndPerfStats_pt->adslfeLOF = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){
- if((RxMessage[4]&0x4) == 0x4)
- pts.adslFarEndPerfStats_pt->adslfeLPR = 1;
- else
- pts.adslFarEndPerfStats_pt->adslfeLPR = 0;
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){
- pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3;
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){
- pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- if (chantype.interleave)
- {
- FAREND_PERF_CRC_FLAG_LP0_MAKECMV;
- }
- else
- {
- FAREND_PERF_CRC_FLAG_LP1_MAKECMV;
- }
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 24 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeCRC = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4];
- }
- }else
- {
- pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- if (chantype.interleave)
- FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV;
- else
- FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 28 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4];
-
- }
- }
- else
- {
- pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- FAREND_PERF_FECS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 32 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeFECS = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4];
- }
- }else {
- pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- FAREND_PERF_ES_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 33 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeES = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4];
- }
- }else
- {
- pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- FAREND_PERF_SES_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 34 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeSES = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4];
-
- }
- }else
- {
- pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- FAREND_PERF_LOSS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeLOSS = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4];
-
- }
- }else
- {
- pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){
- if (adsl_mode<=8 && adsl_mode_extend == 0)
- {
- FAREND_PERF_UAS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 36 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeUAS = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4];
-
- }
- }else
- {
- pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS;
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){
- if (chantype.bearchannel0)
- {
- FAREND_PERF_HECERR_FLAG_BC0_MAKECMV;
- }else if (chantype.bearchannel1)
- {
- FAREND_PERF_HECERR_FLAG_BC1_MAKECMV;
- }
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 37 Index 0");
-#endif
- pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0;
- }
- else{
- pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- }
-
- copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats));
- kfree(pts.adslFarEndPerfStats_pt);
-
- up(&mei_sema);
-
- break;
-// 603221:tc.chen end
- case GET_ADSL_LOOP_DIAGNOSTICS_MODE:
- //lon = loop_diagnostics_mode;
- copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int));
- break;
-//>> SHC
- case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE:
- copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int));
- break;
-
-//<< end SHC
- case LOOP_DIAGNOSTIC_MODE_COMPLETE:
- loop_diagnostics_completed = 1;
- // read adsl mode
- makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
- }
- adsl_mode = RxMessage[4];
-
- makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
- }
- adsl_mode_extend = RxMessage[4];
- wake_up_interruptible(&wait_queue_loop_diagnostic);
- break;
- case SET_ADSL_LOOP_DIAGNOSTICS_MODE:
- if (lon != loop_diagnostics_mode)
- {
- loop_diagnostics_completed = 0;
- loop_diagnostics_mode = lon;
-
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL);
-
- }
- break;
- case GET_ADSL_ATUR_SUBCARRIER_STATS:
- if (loop_diagnostics_completed == 0)
- {
- interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
- if (loop_diagnostics_completed==0)
- {
- return -ERESTARTSYS;
- }
- }
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo));
-
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINSC)){
- FAREND_HLINSC_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- pts.adslATURSubcarrierInfo_pt->HLINSCds = 0;
- }
- else{
- pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4];
-
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINPS)){
- int index=0,size=12;
- //printk("FAREND_HLINPS\n");
- for (index=0;index<1024;index+=size)
- {
- if (index+size>=1024)
- size = 1024-index;
- FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2);
-#if 0
- int msg_idx;
- for(msg_idx=0;msg_idx<size;msg_idx++)
- printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-#endif
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGMT)){
- FAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0;
- }
- else{
- pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4];
-
- }
- }
-
- /////////////////////////////////////////////////////////////////////////
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGPS)){
- //printk("FAREND_HLOGPS\n");
- int index=0,size=12;
- for (index=0;index<256;index+=size)
- {
- if (index+size>=256)
- size = 256-index;
-
- FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
- {
- memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2);
- }else
- {
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
- }
- }
- }
- if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
- {
- pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1];
- for (index=1;index<256;index++)
- {
- pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1;
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNMT)){
- FAREND_QLNMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- pts.adslATURSubcarrierInfo_pt->QLNMTds = 0;
- }
- else{
- pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4];
- }
- }
-
- /////////////////////////////////////////////////////////////////////////
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNPS)){
- int index=0,size=12;
- //printk("FAREND_QLNPS\n");
- for (index=0;index<128;index+=size)
- {
- if (index+size>=128)
- size = 128-index;
- FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- //memcpy(&pts.adslATURSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
- if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
- {
- pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- }else
- {
- pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
- }
-
-
- }
- }
- if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode
- {
- pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1];
- for (index=1;index<256;index++)
- {
- pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1;
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRMT)){
- FAREND_SNRMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- pts.adslATURSubcarrierInfo_pt->SNRMTds = 0;
- }
- else{
- pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4];
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRPS)){
- int index=0,size=12;
- //printk("FAREND_SNRPS\n");
- for (index=0;index<512;index+=size)
- {
- if (index+size>=512)
- size = 512-index;
- FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2);
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATURSubcarrierInfo_pt->SNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
-
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_BITPS)){
- int index=0,size=12;
- //printk("FAREND_BITPS\n");
- for (index=0;index<256;index+=size)
- {
- if (index+size>=256)
- size = 256-index;
- FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]);
-
- }
-
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_GAINPS)){
- int index=0,size=12;
- //printk("FAREND_GAINPS\n");
- for (index=0;index<512;index+=size)
- {
- FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- }
- else{
- /*
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
- pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
-
- }
- */
- memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2);
-#if 0
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
-
- }
-#endif
- }
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslATURSubcarrierInfo_pt, sizeof(adslATURSubcarrierInfo));
- kfree(pts.adslATURSubcarrierInfo_pt);
-
- up(&mei_sema);
- break;
- case GET_ADSL_ATUC_SUBCARRIER_STATS:
- if (loop_diagnostics_completed == 0)
- {
- interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ);
- if (loop_diagnostics_completed==0)
- {
- return -ERESTARTSYS;
- }
- }
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- pts.adslATUCSubcarrierInfo_pt = (adslATUCSubcarrierInfo *)kmalloc(sizeof(adslATUCSubcarrierInfo), GFP_KERNEL);
- copy_from_user((char *)pts.adslATUCSubcarrierInfo_pt, (char *)lon, sizeof(adslATUCSubcarrierInfo));
-
-
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINSC)){
- NEAREND_HLINSC_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 71 Index 2");
-#endif
- pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0;
- }
- else{
- pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4];
-
- }
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINPS)){
- int index=0,size=12;
- //printk("NEAREND_HLINPS\n");
- for (index=0;index<128;index+=size)
- {
- if (index+size>=128)
- size = 128-index;
- NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 73 Index 0");
-#endif
- }
- else{
- memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2);
-#if 0
- int msg_idx;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
-#endif
- }
- }
- }
-
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGMT)){
- NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 80 Index 0");
-#endif
- pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0;
- }
- else{
- pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4];
-
- }
- }
-
- /////////////////////////////////////////////////////////////////////////
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGPS)){
- int index=0,size=12;
- //printk("NEAREND_HLOGPS\n");
- for (index=0;index<64;index+=size)
- {
- if (index+size>=64)
- size = 64-index;
- NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 75 Index 0");
-#endif
- }
- else{
-#if 0
- if (adsl_mode <0x4000)//adsl /adsl2 mode
- {
-#endif
- memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2);
-#if 0
- }else
- {
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- //pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx];
- pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx];
- }
- }
-#endif
- }
- }
-#if 0
- if (adsl_mode >= 0x4000)//adsl2 mode
- {
- pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1];
- for (index=1;index<64;index++)
- {
- pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1;
- }
- }
-#endif
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNMT)){
- NEAREND_QLNMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 80 Index 1");
-#endif
- pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0;
- }
- else{
- pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4];
- }
- }
-
- /////////////////////////////////////////////////////////////////////////
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNPS)){
- int index=0,size=12;
- //printk("NEAREND_QLNPS\n");
- for (index=0;index<32;index+=size)
- {
- if (index+size>=32)
- size = 32-index;
- NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 77 Index 0");
-#endif
- }
- else{
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
-
-#if 0
- //memcpy(&pts.adslATUCSubcarrierInfo_pt->QLNpsds[index],&RxMessage[4],size*2);
- if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
- if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode
- {
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- }else
-#endif
- {
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
- }
-
-
- }
- }
-#if 0
- //if (adsl_mode <0x4000)//Annex I/J/L/M
- if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M
- {
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1];
- for (index=1;index<64;index++)
- {
- pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1;
- }
- }
-#endif
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRMT)){
- NEAREND_SNRMT_MAKECMV(H2D_CMV_READ);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 80 Index 2");
-#endif
- pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0;
- }
- else{
- pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4];
- }
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRPS)){
- int index=0,size=12;
- //printk("NEAREND_SNRPS\n");
- for (index=0;index<64;index+=size)
- {
- if (index+size>=64)
- size = 64-index;
- NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 78 Index 0");
-#endif
- }
- else{
- //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2);
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATUCSubcarrierInfo_pt->SNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF);
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
-
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_BITPS)){
- int index=0,size=12;
- //printk("NEAREND_BITPS\n");
- for (index=0;index<32;index+=size)
- {
- if (index+size>=32)
- size = 32-index;
- NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 22 Index 0");
-#endif
- }
- else{
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF);
- pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF);
- //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
-
- }
- }
- }
- if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_GAINPS)){
- int index=0,size=12;
- //printk("NEAREND_GAINPS\n");
- for (index=0;index<64;index+=size)
- {
- if (index+size>=64)
- size = 64-index;
- NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group INFO Address 24 Index 0");
-#endif
- }
- else{
- /*
- int msg_idx=0;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF;
- pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF;
-
- }
- */
- memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2);
-#if 0
- int msg_idx;
- for (msg_idx=0;msg_idx<size;msg_idx++)
- {
- printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]);
- }
-#endif
- }
- }
- }
- copy_to_user((char *)lon, (char *)pts.adslATUCSubcarrierInfo_pt, sizeof(adslATUCSubcarrierInfo));
- kfree(pts.adslATUCSubcarrierInfo_pt);
- up(&mei_sema);
- break;
- case GET_ADSL_LINE_INIT_STATS:
- copy_to_user((char *)lon, (char *)&AdslInitStatsData, sizeof(AdslInitStatsData));
- break;
-
- case GET_ADSL_POWER_SPECTRAL_DENSITY:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- i=0;
- pts.adslPowerSpectralDensity_pt = (adslPowerSpectralDensity *)kmalloc(sizeof(adslPowerSpectralDensity), GFP_KERNEL);
- memset((char *)pts.adslPowerSpectralDensity_pt, 0, sizeof(adslPowerSpectralDensity));
-
- //US
- NOMPSD_US_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- j=RxMessage[4];
- }
- PCB_US_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- temp=RxMessage[4];
- }
- RMSGI_US_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- k=(int16_t)RxMessage[4];
- }
- if (i==0)
- {
- pts.adslPowerSpectralDensity_pt->ACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256;
- }
- // DS
- i=0;
- j=temp=temp2=0;
- NOMPSD_DS_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- j=RxMessage[4];
- }
- PCB_DS_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- temp=RxMessage[4];
- }
- RMSGI_DS_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group PLAM Address 35 Index 0");
-#endif
- i=-1;
- }
- else{
- //temp2=RxMessage[4];
- k=(int16_t)RxMessage[4];
- }
- if (i==0)
- {
- pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256;
- }
- copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity));
- kfree(pts.adslPowerSpectralDensity_pt);
- up(&mei_sema);
- break;
- case AMAZON_MEI_START:
- showtime=0;
- loop_diagnostics_completed = 0;
-#ifdef ARC_READY_ACK
-#ifdef LOCK_RETRY
- i=0;
-lock_retry:
- if(down_trylock(&mei_sema)!=0)
- {
- reboot_lock = 1;
- printk("lock fail\n");
- i++;
- if (i <=5)
- {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
- goto lock_retry;
- }else
- {
- printk("Force to Reboot ADSL!\n");
- up(&mei_sema);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1000);
- sema_init(&mei_sema, 1); // semaphore initialization, mutex
- }
- }else
- {
- reboot_lock = 1;
- }
-#else
- if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
- {
- return -ERESTARTSYS;
- }
-#endif
-#endif
- //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
- if(chantype.interleave==1){
- kfree(interleave_mei_net.priv);
- unregister_netdev(&interleave_mei_net);
- }
- else if(chantype.fast==1){
- kfree(fast_mei_net.priv);
- unregister_netdev(&fast_mei_net);
- }
- chantype.interleave=0;
- chantype.fast=0;
- meiMailboxInterruptsDisable(); //disable all MEI interrupts
- if(mei_arc_swap_buff == NULL){
- mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
- if(mei_arc_swap_buff==NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n malloc fail for codeswap buff");
-#endif
- meierr=MEI_FAILURE;
- }
- }
- if(meiForceRebootAdslModem() != MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n meiForceRebootAdslModem() error...");
-#endif
- meierr=MEI_FAILURE;
- }
- interruptible_sleep_on(&wait_queue_codeswap);
- // reset is called
- break;
- case AMAZON_MEI_MIB_DAEMON:
-#ifdef IFX_SMALL_FOOTPRINT /* [ */
- return -1;
-#else /* ][ !IFX_SMALL_FOOTPRINT */
- i=0;
- while(1){
- if(i<MIB_INTERVAL)
- interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
- i=0;
- if(showtime==1){
-// printk("\n\n update mib");
-
- do_gettimeofday(&time_now);
- if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
- if(current_intvl->list.next!=&interval_list){
- current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- }
- else{
- mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
- list_del(interval_list.next);
- memset(mib_ptr, 0, sizeof(amazon_mei_mib));
- list_add_tail(&(mib_ptr->list), &interval_list);
- if(current_intvl->list.next==&interval_list)
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nlink list error");
-#endif
- current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- }
- }
-
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-/*
- ATUC_PERF_LO_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 0 Index 0");
-#endif
- }
- else{
- if(RxMessage[4]&PLAM_LOS_FailureBit){
- current_intvl->AtucPerfLos++;
- ATUC_PERF_LOSS++;
- CurrStatus.adslAtucCurrStatus = 2;
- }
- if(RxMessage[4]&PLAM_LOF_FailureBit){
- current_intvl->AtucPerfLof++;
- ATUC_PERF_LOFS++;
- CurrStatus.adslAtucCurrStatus = 1;
- }
- if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
- CurrStatus.adslAtucCurrStatus = 0;
- }
-*/
- ATUC_PERF_ESS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 7 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
- if(temp>=0){
- current_intvl->AtucPerfEs+=temp;
- ATUC_PERF_ESS+=temp;
- mib_pread.ATUC_PERF_ESS = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
- ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
- mib_pread.ATUC_PERF_ESS = RxMessage[4];
- }
- }
-/*
- ATUR_PERF_LO_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 1 Index 0");
-#endif
- }
- else{
- if(RxMessage[4]&PLAM_LOS_FailureBit){
- current_intvl->AturPerfLos++;
- ATUR_PERF_LOSS++;
- CurrStatus.adslAturCurrStatus = 2;
- }
- if(RxMessage[4]&PLAM_LOF_FailureBit){
- current_intvl->AturPerfLof++;
- ATUR_PERF_LOFS++;
- CurrStatus.adslAturCurrStatus = 1;
- }
- if(RxMessage[4]&PLAM_LPR_FailureBit){
- current_intvl->AturPerfLpr++;
- ATUR_PERF_LPR++;
- CurrStatus.adslAturCurrStatus = 3;
- }
- if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
- CurrStatus.adslAturCurrStatus = 0;
- }
-*/
- ATUR_PERF_ESS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 33 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
- if(temp>=0){
- current_intvl->AturPerfEs+=temp;
- ATUR_PERF_ESS+=temp;
- mib_pread.ATUR_PERF_ESS = RxMessage[4];
- }
- else{
- current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
- ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
- mib_pread.ATUR_PERF_ESS=RxMessage[4];
- }
- }
- // to update rx/tx blocks
- ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4];
- }
- ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-#endif
- }
- else{
- temp2 = RxMessage[4];
- }
- if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
- current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
- ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
- mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
- }
- else{
- current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
- ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
- mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
- }
- current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
- ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
-/*
- ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
- printk("\n\nCMV fail, Group 7 Address 20 Index 0");
- else{
- if(RxMessage[4]){
- current_intvl->AturChanPerfTxBlk+=RxMessage[4];
- ATUR_CHAN_TX_BLK+=RxMessage[4];
- }
- }
- ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
- printk("\n\nCMV fail, Group 7 Address 21 Index 0");
- else{
- if(RxMessage[4]){
- current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
- ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
- }
- }
-*/
- if(chantype.interleave == 1){
- ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 3 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
- if(temp>=0){
- current_intvl->AturChanPerfCorrBlk+=temp;
- ATUR_CHAN_CORR_BLK+=temp;
- mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
- ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
- mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
- }
- }
- }
- else if(chantype.fast == 1){
- ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 3 Index 1");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
- if(temp>=0){
- current_intvl->AturChanPerfCorrBlk+=temp;
- ATUR_CHAN_CORR_BLK+=temp;
- mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
- ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
- mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
- }
- }
- }
-
- if(chantype.interleave == 1){
- ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 2 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
- if(temp>=0){
- current_intvl->AturChanPerfUncorrBlk+=temp;
- ATUR_CHAN_UNCORR_BLK+=temp;
- mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
- ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
- mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
- }
- }
- }
- else if(chantype.fast == 1){
- ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 2 Index 1");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
- if(temp>=0){
- current_intvl->AturChanPerfUncorrBlk+=temp;
- ATUR_CHAN_UNCORR_BLK+=temp;
- mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
- ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
- mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
- }
- }
- }
-
- //RFC-3440
-
-#ifdef AMAZON_MEI_MIB_RFC3440
- ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
- if(temp>=0){
- current_intvl->AtucPerfStatFastR+=temp;
- ATUC_PERF_STAT_FASTR+=temp;
- mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
- ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
- }
- }
- ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
- if(temp>=0){
- current_intvl->AtucPerfStatFailedFastR+=temp;
- ATUC_PERF_STAT_FAILED_FASTR+=temp;
- mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
- ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
- }
- }
- ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 8 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
- if(temp>=0){
- current_intvl->AtucPerfStatSesL+=temp;
- ATUC_PERF_STAT_SESL+=temp;
- mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
- ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
- }
- }
- ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
- if(temp>=0){
- current_intvl->AtucPerfStatUasL+=temp;
- ATUC_PERF_STAT_UASL+=temp;
- mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
- ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
- }
- }
- ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 34 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
- if(temp>=0){
- current_intvl->AtucPerfStatUasL+=temp;
- ATUC_PERF_STAT_UASL+=temp;
- mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
- ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
- mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
- }
- }
-
-#endif
- up(&mei_sema);
-
- do_gettimeofday(&time_fini);
- i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec
- }//showtime==1
- }
- break;
-#endif /* ] !IFX_SMALL_FOOTPRINT */
- case AMAZON_MEI_RESET:
- case AMAZON_MEI_REBOOT:
- case AMAZON_MEI_SHOWTIME:
-/* if(mei_arc_swap_buff !=NULL){
- kfree(mei_arc_swap_buff);
- mei_arc_swap_buff=NULL;
- }
- if(image_buffer !=NULL){
-// kfree(image_buffer);
- vfree(image_buffer);
- image_buffer =NULL;
- }
-*/
- if(clreoc_command_pkt !=NULL){
- kfree(clreoc_command_pkt);
- clreoc_command_pkt =NULL;
- }
- for(i=0;i<CLREOC_BUFF_SIZE;i++)
- clreoc_pkt[i].len=0; //flush all remaining clreoc commands in buffer
-/*
- memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
- INIT_LIST_HEAD(&interval_list);
- for(i=0;i<INTERVAL_NUM;i++)
- list_add_tail(&(mei_mib[i].list), &interval_list);
- current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- ATUC_PERF_LOFS=0;
- ATUC_PERF_LOSS=0;
- ATUC_PERF_ESS=0;
- ATUC_PERF_INITS=0;
- ATUR_PERF_LOFS=0;
- ATUR_PERF_LOSS=0;
- ATUR_PERF_LPR=0;
- ATUR_PERF_ESS=0;
- ATUR_CHAN_RECV_BLK=0;
- ATUR_CHAN_TX_BLK=0;
- ATUR_CHAN_CORR_BLK=0;
- ATUR_CHAN_UNCORR_BLK=0;
- memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4);
- AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1;
-*/
- PrevTxRate.adslAtucChanPrevTxRate=0;
- PrevTxRate.adslAturChanPrevTxRate=0;
- CurrStatus.adslAtucCurrStatus=0;
- CurrStatus.adslAturCurrStatus=0;
-
- if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){
-#ifdef AMAZON_CHECK_LINK
- if (adsl_link_notify){
- (*adsl_link_notify)(0);
- }
-#endif
- showtime=0;
- //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
- // disconnect net_dev
- if(chantype.interleave==1){
- kfree(interleave_mei_net.priv);
- unregister_netdev(&interleave_mei_net);
-// if(unregister_netdev(&interleave_mei_net)!=0)
-// printk("\n unregister interleave fail");
- }
- else if(chantype.fast==1){
- kfree(fast_mei_net.priv);
- unregister_netdev(&fast_mei_net);
-// if(unregister_netdev(&fast_mei_net)!=0)
-// printk("\n unregister fast fail");
- }
- chantype.interleave=0;
- chantype.fast=0;
-// 603221:tc.chen start
- chantype.bearchannel0 = 0;
- chantype.bearchannel1 = 0;
- adsl_mode = 0;
-// 603221:tc.chen end
-
- while(1){
-
- makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
- //printk("AdslInitStatsData.FullInitializationCount++\n");
- AdslInitStatsData.FullInitializationCount++;
- //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
- AdslInitStatsData.FailedFullInitializationCount++;
- //printk("AdslInitStatsData.LINIT_Errors++\n");
- AdslInitStatsData.LINIT_Errors++;
- }else
- {
- //printk("RxMessage=%X\n",RxMessage[4]);
- if ( RxMessage[4]!=0x1)
- {
- //printk("AdslInitStatsData.FullInitializationCount++\n");
- AdslInitStatsData.FullInitializationCount++;
- if ( RxMessage[4] != 0x7)
- {
- //printk("AdslInitStatsData.LINIT_Errors++\n");
- AdslInitStatsData.LINIT_Errors++;
- //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
- AdslInitStatsData.FailedFullInitializationCount++;
-
- }
- }
- }
-
- reboot_flag=0;
- wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon
-
- interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ); // sleep until arc ready
-#ifdef ARC_READY_ACK
- if(reboot_flag!=0)
- break;
- else
- {
- up(&mei_sema);
- printk("\n reboot retry");
- }
-#else
- break;
-#endif
- }
- }
- else{ //AMAZON_MEI_SHOWTIME
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- // clreoc stuff
- makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 83 Index 0");
-#endif
- }
- else{
- clreoc_max_tx_len = (int)RxMessage[4];
- clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL);
- if(clreoc_command_pkt == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("kmalloc error for clreoc_command_pkt\n\n");
-#endif
- up(&mei_sema);
- return -1;
- }
- for(i=0;i<CLREOC_BUFF_SIZE;i++){
- clreoc_pkt[i].command = (u8 *)(((u8 *)clreoc_command_pkt) + (clreoc_max_tx_len*i));
- clreoc_pkt[i].len=0;
- }
- }
-
- // decide what channel, then register
- makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 2 Address 12 Index 0");
-#endif
- }
- else{
- if((RxMessage[4]&0x1)==1){
- if(register_netdev(&interleave_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n Register interleave Device Failed.");
-#endif
- }
- else{
- chantype.interleave = 1;
- chantype.fast= 0;
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n channel is interleave");
-#endif
- }
- }
- else if((RxMessage[4]&0x2)==2){
- if(register_netdev(&fast_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n Register fast Device Failed.");
-#endif
- }
- else{
- chantype.fast = 1;
- chantype.interleave = 0;
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n channel is fast");
-#endif
- }
- }
- else{
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\nunknown channel type, 0x%8x", RxMessage[4]);
-#endif
- }
-// 603221:tc.chen start
- if ( (RxMessage[4]&0x100) == 0x100)
- {
- chantype.bearchannel0 = 1;
- }else if ( (RxMessage[4]&0x100) == 0x200)
- {
- chantype.bearchannel1 = 1;
- }
-// 603221:tc.chen end
- }
-// 603221:tc.chen start
- // read adsl mode
- makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
- }
- adsl_mode = RxMessage[4];
-// 603221:tc.chen end
- makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group STAT Address 1 Index 0");
-#endif
- }
- adsl_mode_extend = RxMessage[4];
-
- // update previous channel tx rate
- ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 1 Index 0");
-#endif
- PrevTxRate.adslAtucChanPrevTxRate = 0;
- }
- else{
- PrevTxRate.adslAtucChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
- ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 6 Address 0 Index 0");
-#endif
- PrevTxRate.adslAturChanPrevTxRate = 0;
- }
- else{
- PrevTxRate.adslAturChanPrevTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16);
- }
-
-// up(&mei_sema);
-
-// showtime=1;
- //SET_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO OFF
-//dying gasp -start
-#ifdef IFX_DYING_GASP
- lop_debugwr.buffer[0]=0xffffffff; //dying gasp
- lop_debugwr.iCount=1; //dying gasp
- makeCMV(H2D_CMV_READ, INFO, 66, 4, 1, NULL);
- //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 66 Index 4");
- }
-#endif
- lop_debugwr.iAddress=(u32)RxMessage[4];
- makeCMV(H2D_CMV_READ, INFO, 66, 5, 1, NULL);
- //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 3 Address 66 Index 5");
- }
-#endif
- lop_debugwr.iAddress+=((u32)RxMessage[4])<<16;
-
-//dying gasp -end
-#endif // IFX_DYING_GASP
-
-//joelin 04/16/2005-start
- makeCMV(H2D_CMV_WRITE, PLAM, 10, 0, 1, &unavailable_seconds);
- //mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &RxMessage);
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-
-#endif
- }
-
-
-//joelin 04/16/2005-end
- showtime=1;
- up(&mei_sema);
-#ifdef AMAZON_CHECK_LINK
- if (adsl_link_notify){
- (*adsl_link_notify)(1);
- }
-#endif
-
-
- }
- break;
-/*
- case AMAZON_MEI_REPLY:
- copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
- if(meiCMV(buff, YES_REPLY) != MEI_SUCCESS){
- printk("\n\n meiCMV no reply back");
- meierr=MEI_FAILURE;
- }
- else
- copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH * 2);
- break;
- case AMAZON_MEI_NOREPLY:
- copy_from_user((char *)buff, (char *)lon, MSG_LENGTH * 2);
- if(meiCMV(buff, NO_REPLY) != MEI_SUCCESS){
- printk("\n\n meiCMV Host to DSP failed");
- meierr=MEI_FAILURE;
- }
- break;
-*/
-
- case AMAZON_MEI_HALT:
- meiHaltArc();
- break;
- case AMAZON_MEI_CMV_WINHOST:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-
- if (!from_kernel )
- copy_from_user((char *)TxMessage, (char *)lon, MSG_LENGTH*2);//joelin
- else
- memcpy(TxMessage,(char *)lon,MSG_LENGTH*2);
-
-#if 0
-// if((TxMessage[0]&0xff0)==0x0a0){
- for(i=0;i<16;i++){
- printk("\nTxMessage[%i]=%8x", i, TxMessage[i]);
- }
-// }
-#endif
-
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n WINHOST CMV fail ");
- printk("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",TxMessage[0],TxMessage[1],TxMessage[2],TxMessage[3],RxMessage[0],RxMessage[1],RxMessage[2],RxMessage[3],RxMessage[4]);
-#endif
- meierr = MEI_FAILURE;
- }
- else
- {
- if (!from_kernel ) //joelin
- copy_to_user((char *)lon, (char *)RxMessage, MSG_LENGTH*2);
- else
- memcpy((char *)lon,(char *)RxMessage,MSG_LENGTH*2);
- }
-
- up(&mei_sema);
- break;
-#ifdef AMAZON_MEI_CMV_EXTRA
- case AMAZON_MEI_CMV_READ:
- copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
- meiLongwordRead(regrdwr.iAddress, &(regrdwr.iData));
- {
-// printk("\n\n iAddress = %8x",regrdwr.iAddress);
- }
- copy_to_user((char *)lon, (char *)(&regrdwr), sizeof(meireg));
- {
-// printk("\n\n iData readback = %8x", regrdwr.iData);
- }
- break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
- case AMAZON_MEI_CMV_WRITE:
- copy_from_user((char *)(&regrdwr), (char *)lon, sizeof(meireg));
- {
-// printk("\n\n iAddress = %8x",regrdwr.iAddress);
-// printk("\n\n iData = %8x",regrdwr.iData);
- }
- meiLongwordWrite(regrdwr.iAddress, regrdwr.iData);
- break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
- case AMAZON_MEI_REMOTE:
- copy_from_user((char *)(&i), (char *)lon, sizeof(int));
- if(i==0){
- meiMailboxInterruptsEnable();
-
- up(&mei_sema);
- }
- else if(i==1){
- meiMailboxInterruptsDisable();
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
- }
- else{
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n AMAZON_MEI_REMOTE argument error");
-#endif
- meierr=MEI_FAILURE;
- }
- break;
-#endif
-
-#ifdef AMAZON_MEI_CMV_EXTRA
- case AMAZON_MEI_READDEBUG:
- case AMAZON_MEI_WRITEDEBUG:
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-#ifdef IFX_DYING_GASP
- if (!from_kernel) copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));//dying gasp
- else memcpy((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
-#else //IFX_DYING_GASP
- copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
-
-#endif //IFX_DYING_GASP
-#if 0
- printk("\nIN iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
-#endif
-
- if(command==AMAZON_MEI_READDEBUG)
- meiDebugRead(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);
- else
- meiDebugWrite(debugrdwr.iAddress, debugrdwr.buffer, debugrdwr.iCount);
-
-#ifdef IFX_DYING_GASP
- if (!from_kernel) copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));//dying gasp
-#else //IFX_DYING_GASP
- copy_to_user((char *)lon, (char*)(&debugrdwr), sizeof(debugrdwr));
-#endif //IFX_DYING_GASP
- up(&mei_sema);
-
-#if 0
- printk("\nOUT iAddress: %8x, iCount:%8x\n", debugrdwr.iAddress, debugrdwr.iCount);
- for(i=0;i<debugrdwr.iCount;i++)
- printk("\n %8x",debugrdwr.buffer[i]);
-#endif
- break;
-#endif
-
- case AMAZON_MEI_LOP:
- //GPIO31 :dying gasp event indication
- // (1) logic high: dying gasp event is false (default)
- // (2) logic low: dying gasp event is true
-#ifdef IFX_DYING_GASP
- break;
-#else
- CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
- CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
- CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
- SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
- asm("SYNC");
- if(((*((volatile u32 *)0xB0100B44))&0x8000)==0x0)
- meierr=MEI_FAILURE; //return - to indicate loss of power
- break;
-#endif //#ifdef IFX_DYING_GASP
-
- //for PCM
- case AMAZON_MEI_PCM_SETUP:
- //gpio
-
- *AMAZON_GPIO_P0_DIR |=1<<15;
- *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
- *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
- *AMAZON_GPIO_P0_OD |=1<<15;
-
- /*GPIO 16 TDM_DI*/
- *AMAZON_GPIO_P1_DIR &=~1;
- *AMAZON_GPIO_P1_ALTSEL0 |=1;
- *AMAZON_GPIO_P1_ALTSEL1 &=~1;
-
- /*GPIO 17 TDM_DCL */
- *AMAZON_GPIO_P1_DIR|=0x02;
- *AMAZON_GPIO_P1_ALTSEL0|=0x02;
- *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
- *AMAZON_GPIO_P1_OD|=0x02;
-
- /*GPIO 18 TDM FSC*/
- *AMAZON_GPIO_P1_DIR|=0x04;
- *AMAZON_GPIO_P1_ALTSEL0|=0x04;
- *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
- *AMAZON_GPIO_P1_OD|=0x04;
-
- for(i=0;i<2;i++){
- for(j=0;j<256;j++)
- sampledata[i*256+j]=j;
- }
-
- pcm_start_addr = lon;
-
- printk("\n\n pcm_start_addr is %8x", lon);
-
- for(i=0;i<PCM_CHANNEL_NUM;i++){
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
-#else
- meiDMARead_16((pcm_start_addr+i*16), (u32*)(pcm_data+i), 4);
-#endif
- if((pcm_data[i].S!=8)||(pcm_data[i].len<1)||(pcm_data[i].rdindex!=0)||(pcm_data[i].wrindex!=0)||(pcm_data[i].flow!=0))
- printk("\n\n pcm_data fill in wrongly\n\n");
- printk("\npcm_data %d",i);
- printk("\n S = %d", pcm_data[i].S);
- printk("\n LSW = %4x", pcm_data[i].LSW);
- printk("\n MSW = %4x", pcm_data[i].MSW);
- printk("\n len = %d", pcm_data[i].len);
- printk("\n rdindex = %d", pcm_data[i].rdindex);
- printk("\n wrindex = %d", pcm_data[i].wrindex);
- printk("\n flow = %d", pcm_data[i].flow);
- pcm_data[i].finish=0;
- if(i%2==0){//tx channel
- for(j=0;j<PCM_BUFF_SIZE/256;j++){
- for(k=0;k<256;k++){
- pcm_data[i].buff[j*256+k]=k;
- /* if(k%2==0)
- pcm_data[i].buff[j*256+k]=0xaa;
- else
- pcm_data[i].buff[j*256+k]=0x55;*/
- }
- }
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
-// meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
-#else
- meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),((pcm_data[i].len/4)/2));//fill half first
-// meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16)), (u32*)(pcm_data[i].buff),2);//fill half first
-#endif
- pcm_data[i].point=(pcm_data[i].len)/2;
-// pcm_data[i].point=8;
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
- temp = (temp &0xffff) + (((u32)(pcm_data[i].point))<<16);
-#ifdef PCM_ACCESS_DEBUG
- meiDebugWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
-#else
- meiDMAWrite_16(pcm_start_addr+i*16+12,&temp, 1);//update wrindex
-#endif
- }
- else{// rx channel
- pcm_data[i].point=0;
- }
- }
- break;
- case AMAZON_MEI_PCM_START_TIMER:
- /* GPTU timer 6 */
- /* enable the timer in the PMU */
- *(AMAZON_PMU_PWDCR) = (*(AMAZON_PMU_PWDCR))| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI;
- /* setup the GPTU for timer tick f_fpi == f_gptu*/
- *(AMAZON_GPTU_CLC) = 0x100;
- //reload value = fpi/(HZ * P), timer mode, Prescaler = 4 ( T6I = 000, T6BPS2 = 0)
- *(AMAZON_GPTU_CAPREL) = (int)(117500000/(lon*4));
- *(AMAZON_GPTU_T6CON) = 0x80C0;
-
- if (request_irq(AMAZON_TIMER6_INT, amazon_timer6_interrupt_MEI,0, "hrt", NULL)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n unable to register irq for hrt!!!");
-#endif
- return -1;
- }
- enable_irq(AMAZON_TIMER6_INT);
- break;
- case AMAZON_MEI_PCM_STOP_TIMER:
- disable_irq(AMAZON_TIMER6_INT);
- free_irq(AMAZON_TIMER6_INT, NULL);
- break;
- case AMAZON_MEI_PCM_CHECK:
- for(i=0;i<PCM_CHANNEL_NUM;i++){
- if(pcm_data[i].finish!=1)
- return 0;
- }
- for(i=0;i<PCM_CHANNEL_NUM/2;i++){
- j=0;
- while(1){
- if((pcm_data[i*2+1].buff[j]==0x0) && (pcm_data[i*2+1].buff[j+1]==0x1)&& (pcm_data[i*2+1].buff[j+2]==0x2))
- break;
- else
- j++;
- }
- printk("\n j=%d", j);
- temp=0;
- for(k=0;k<((PCM_BUFF_SIZE-j)/4);k++){
- if(memcmp(pcm_data[i*2].buff+k*4, pcm_data[i*2+1].buff+j+k*4, 4)!=0){
- temp++;
- printk("\n\n%2x %2x %2x %2x %2x %2x %2x %2x\n\n", *((u8*)(pcm_data[i*2].buff+k*4)), *((u8*)(pcm_data[i*2].buff+k*4+1)),*((u8*)(pcm_data[i*2].buff+k*4+2)),*((u8*)(pcm_data[i*2].buff+k*4+3)),*((u8*)(pcm_data[i*2+1].buff+j+k*4)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+1)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+2)),*((u8*)(pcm_data[i*2+1].buff+j+k*4+3)));
- break;
- }
- }
- if(temp!=0)
- printk("\n\n Channel pair %d not match: err32 %d\n\n", i, temp);
- else
- printk("\n\n Channel pair %d match\n\n", i);
- }
- for(i=0;i<PCM_CHANNEL_NUM;i++){
- if(i%2==1){//rx channel
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1);
-#endif
- printk("\n\nRx channel %d: Overflow Bytes %d", i, (temp&0xffff));
- }
- else{//tx channel
-#ifdef PCM_ACCESS_DEBUG
- meiDebugRead_16(pcm_start_addr+i*16, &temp, 1);
-#else
- meiDMARead_16(pcm_start_addr+i*16, &temp, 1);
-#endif
- printk("\n\nElectra Err: %d",(temp&0xffff));
- }
- }
- //check electra overflow
-
- meierr=1;
- break;
- case AMAZON_MEI_PCM_GETDATA:
- copy_to_user(lon, pcm_data[1].buff, PCM_BUFF_SIZE);
- break;
- case AMAZON_MEI_PCM_GPIO:
- //gpio
-
- *AMAZON_GPIO_P0_DIR |=1<<15;
- *AMAZON_GPIO_P0_ALTSEL0 |=1<<15;
- *AMAZON_GPIO_P0_ALTSEL1 &=~(1<<15);
- *AMAZON_GPIO_P0_OD |=1<<15;
-
- /*GPIO 16 TDM_DI*/
- *AMAZON_GPIO_P1_DIR &=~1;
- *AMAZON_GPIO_P1_ALTSEL0 |=1;
- *AMAZON_GPIO_P1_ALTSEL1 &=~1;
-
- /*GPIO 17 TDM_DCL */
- *AMAZON_GPIO_P1_DIR|=0x02;
- *AMAZON_GPIO_P1_ALTSEL0|=0x02;
- *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x02;
- *AMAZON_GPIO_P1_OD|=0x02;
-
- /*GPIO 18 TDM FSC*/
- *AMAZON_GPIO_P1_DIR|=0x04;
- *AMAZON_GPIO_P1_ALTSEL0|=0x04;
- *AMAZON_GPIO_P1_ALTSEL1 &=(u32)~0x04;
- *AMAZON_GPIO_P1_OD|=0x04;
- break;
-
-
-
- //for clearEoC
-#ifdef AMAZON_CLEAR_EOC
- case AMAZON_MEI_GET_EOC_LEN:
- while(1){
- current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
- if((current_clreoc->len)>0){
- copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4);
- break;
- }
- else//wait for eoc data from higher layer
- interruptible_sleep_on(&wait_queue_clreoc);
- }
- break;
- case AMAZON_MEI_GET_EOC_DATA:
- current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
- if((current_clreoc->len)>0){
- copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len);
- meierr=1;
- list_del(clreoc_list.next); //remove and add to end of list
- current_clreoc->len = 0;
- list_add_tail(&(current_clreoc->list), &clreoc_list);
- }
- else
- meierr=-1;
- break;
- case AMAZON_MEI_EOC_SEND:
- copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr));
- eoc_skb = dev_alloc_skb(debugrdwr.iCount*4);
- if(eoc_skb==NULL){
- printk("\n\nskb alloc fail");
- break;
- }
-
- eoc_skb->len=debugrdwr.iCount*4;
- memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4);
-
- ifx_push_eoc(eoc_skb); //pass data to higher layer
- break;
-#endif //#ifdef AMAZON_CLEAR_EOC
- case AMAZON_MIB_LO_ATUC:
- do_gettimeofday(&time_now);
- if(lon&0x1){
- if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){
- current_intvl->AtucPerfLos++;
- ATUC_PERF_LOSS++;
- CurrStatus.adslAtucCurrStatus = 2;
- }
- (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
- }
- if(lon&0x2){
- if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){
- current_intvl->AtucPerfLof++;
- ATUC_PERF_LOFS++;
- CurrStatus.adslAtucCurrStatus = 1;
- }
- (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
- }
- if(!(lon&0x3))
- CurrStatus.adslAtucCurrStatus = 0;
- break;
- case AMAZON_MIB_LO_ATUR:
- do_gettimeofday(&time_now);
- if(lon&0x1){
- if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){
- current_intvl->AturPerfLos++;
- ATUR_PERF_LOSS++;
- CurrStatus.adslAturCurrStatus = 2;
- }
- (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec;
- }
- if(lon&0x2){
- if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){
- current_intvl->AturPerfLof++;
- ATUR_PERF_LOFS++;
- CurrStatus.adslAturCurrStatus = 1;
- }
- (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec;
- }
- if(lon&0x4){
- if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){
- current_intvl->AturPerfLpr++;
- ATUR_PERF_LPR++;
- CurrStatus.adslAturCurrStatus = 3;
- }
- (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec;
- }
- if(!(lon&0x7))
- CurrStatus.adslAturCurrStatus = 0;
- break;
- case AMAZON_MEI_DOWNLOAD:
- // DMA the boot code page(s)
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n start download pages");
-#endif
- for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){
- if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){
- page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( page_size > 0){
- meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size);
- }
- }
- if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){
- page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( page_size > 0){
- meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size);
- }
- }
- }
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n pages downloaded");
-#endif
- break;
- //509221:tc.chen start
- case AMAZON_MEI_DEBUG_MODE:
- mei_debug_mode = lon;
- break;
- //509221:tc.chen end
- }
- return meierr;
-}
-
-
-////////////////////// Interrupt handler /////////////////////////////////////////////////////
-static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *);
-static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs)
-{
- u32 scratch;
- u32 fetchpage;
- u32 size;
- u32 dest_addr;
- u32 temp;
- int i;
-
- meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1);
- if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK)
- {
- if(showtime==1){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n Code Swap Request After ShowTime !!!");
-#endif
- }
- else{
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n Code Swap Request");
-#endif
- fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK;
- size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( size > 0)
- {
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk(" : prom page num %d",fetchpage);
-#endif
- meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
- }
-
- size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr);
- if( size > 0)
- {
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk(" : data page num %d",fetchpage);
-#endif
- meiDMAWrite( dest_addr, mei_arc_swap_buff, size);
- }
- }
- // Notify arc that mailbox read complete
- meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
-
- // Tell ARC Codeswap is done
- meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE);
- asm("SYNC");
- i=0;
- while(i<WHILE_DELAY){
- meiLongwordRead(MEI_TO_ARC_INT, &temp);
- if((temp & MEI_TO_ARC_CS_DONE) ==0){
-#ifdef AMAZON_MEI_DEBUG_ON
-// printk("\n\n Code Swap Done");
-#endif
- break;
- }
- i++;
- if(i==WHILE_DELAY){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n MEI_TO_ARC_CS_DONE not cleared by ARC");
- //509221:tc.chen start
- if (!mei_debug_mode)
- {
- //printk("Reset Arc!\n");
- //printk("AdslInitStatsData.FullInitializationCount++\n");
- AdslInitStatsData.FullInitializationCount++;
- if (!showtime)
- {
- //printk("AdslInitStatsData.FailedFullInitializationCount++\n");
- AdslInitStatsData.FailedFullInitializationCount++;
- //printk("AdslInitStatsData.LINIT_Errors++\n");
- AdslInitStatsData.LINIT_Errors++;
- }
-
- wake_up_interruptible(&wait_queue_codeswap); // wait up ioctl reboot
- }
- //509221:tc.chen end
-#endif
- }
- }
- }
- else{ // normal message
-// printk("\n\n interrupt");
- meiMailboxRead(RxMessage, MSG_LENGTH);
- if(cmv_waiting==1){
- arcmsgav=1;
- cmv_waiting=0;
- wake_up_interruptible(&wait_queue_arcmsgav);
- }
- else{
- indicator_count++;
- memcpy((char *)Recent_indicator, (char *)RxMessage, MSG_LENGTH *2);
-#ifdef ARC_READY_ACK
- if(((RxMessage[0]&0xff0)>>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){ //check ARC ready message
-
-#ifdef LOCK_RETRY
- if (reboot_lock)
- {
- reboot_lock = 0;
- up(&mei_sema); // allow cmv access
- }
-#else
- up(&mei_sema); // allow cmv access
-#endif
- reboot_flag=1;
-//#ifdef ADSL_LED_SUPPORT
-#if 0
- led_support_check=1;//adsl led for 1.1.2.7.1.1
- adsl_led_flash();//adsl led for 1.1.2.7.1.1
-#endif
- wake_up_interruptible(&wait_queue_reboot); // wait up ioctl reboot
- }
-#endif
- }
- }
-// meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
- mask_and_ack_amazon_irq(AMAZON_MEI_INT);
- return;
-}
-
-// 603221:tc.chen start
-////////////////////////hdlc ////////////////
-
-// get hdlc status
-static unsigned int ifx_me_hdlc_status(void)
-{
- u16 CMVMSG[MSG_LENGTH];
- int ret;
-
- if (showtime!=1)
- return -ENETRESET;
-
- makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG); //Get HDLC status
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
- return CMVMSG[4]&0x0F;
-}
-
-int ifx_me_is_resloved(int status)
-{
- u16 CMVMSG[MSG_LENGTH];
- int ret;
-
- if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT)
- return ME_HDLC_UNRESOLVED;
- if (status == ME_HDLC_IDLE)
- {
- makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG); //Get ME-HDLC Control
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return IFX_POP_EOC_FAIL;
- }
- if (CMVMSG[4]&(1<<0))
- {
- return ME_HDLC_UNRESOLVED;
- }
-
- }
- return ME_HDLC_RESOLVED;
-}
-
-int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length)
-{
- int ret;
- u16 CMVMSG[MSG_LENGTH];
- u16 data=0;
- u16 pkt_len=len;
- if (pkt_len > max_length)
- {
- printk("Exceed maximum eoc message length\n");
- return -ENOBUFS;
- }
- //while(pkt_len > 0)
- {
- makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG); //Write clear eoc message to ARC
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
-
- makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG); //Update tx message length
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
-
- data = (1<<0);
- makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG); //Start to send
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
- return 0;
- }
-}
-
-static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len)
-{
- int hdlc_status=0;
- u16 CMVMSG[MSG_LENGTH];
- int max_hdlc_tx_length=0,ret=0,retry=0;
-
- while(retry<10)
- {
- hdlc_status = ifx_me_hdlc_status();
- if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message
- {
- makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG); //Get Maximum Allowed HDLC Tx Message Length
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
- max_hdlc_tx_length = CMVMSG[4];
- ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length);
- return ret;
- }
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
- }
- return -EBUSY;
-}
-
-int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len)
-{
- u16 CMVMSG[MSG_LENGTH];
- int msg_read_len,ret=0,pkt_len=0,retry = 0;
-
- while(retry<10)
- {
- ret = ifx_me_hdlc_status();
- if (ret == ME_HDLC_RESP_RCVD)
- {
- int current_size=0;
- makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG); //Get EoC packet length
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- return -EIO;
- }
-
- pkt_len = CMVMSG[4];
- if (pkt_len > max_hdlc_pkt_len)
- {
- ret = -ENOMEM;
- goto error;
- }
- while( current_size < pkt_len)
- {
- if (pkt_len - current_size >(MSG_LENGTH*2-8))
- msg_read_len = (MSG_LENGTH*2-8);
- else
- msg_read_len = pkt_len - (current_size);
- makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG); //Get hdlc packet
- ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
- if (ret != 0)
- {
- goto error;
- }
- memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len);
- current_size +=msg_read_len;
- }
- ret = current_size;
- break;
- }else
- {
- ret = -ENODATA;
- }
-
- retry++;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
-
- }
- return ret;
-error:
-
- return ret;
-}
-
-////////////////////////hdlc ////////////////
-// 603221:tc.chen end
-
-/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt) //////////
-int ifx_pop_eoc(struct sk_buff * pkt);
-int ifx_pop_eoc(struct sk_buff * pkt)
-{
- amazon_clreoc_pkt * current;
- if(showtime!=1){
- dev_kfree_skb(pkt);
- return IFX_POP_EOC_FAIL;
- }
- if((pkt->len)>clreoc_max_tx_len){
- dev_kfree_skb(pkt);
- return IFX_POP_EOC_FAIL;
- }
- current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list);
- while(1){
- if(current->len==0){
- memcpy(current->command, pkt->data, pkt->len);
- current->len=pkt->len;
- break;
- }
- else{
- if((current->list).next==&clreoc_list){
- dev_kfree_skb(pkt);
- return IFX_POP_EOC_FAIL; //buffer full
- }
- current = list_entry((current->list).next,amazon_clreoc_pkt, list);
- }
- }
- wake_up_interruptible(&wait_queue_clreoc);
-
- dev_kfree_skb(pkt);
- return IFX_POP_EOC_DONE;
-}
-/* this is used in circular fifo mode */
-/*
-int ifx_pop_eoc(sk_buff * pkt);
-int ifx_pop_eoc(sk_buff * pkt)
-{
- int buff_space,i;
- if(showtime!=1)
- return IFX_POP_EOC_FAIL;
-
- if(clreoc_wr>=clreoc_rd)
- buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd);
- else
- buff_space = clreoc_rd - clreoc_wr - 1;
- if((pkt->len)>buff_space)
- return IFX_POP_EOC_FAIL;
-
- if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){
- memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1));
- memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1));
- clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE;
- }
- else{
- memcpy((clreoc+clreoc_wr), pkt->data, pkt->len);
- if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE)
- clreoc_wr=0;
- else
- clreoc_wr+=pkt->len;
- }
- wake_up_interruptible(&wait_queue_clreoc);
- return IFX_POP_EOC_DONE;
-}
-*/
-
-
-////////////////////////////////////////////////////////////////////////////
-//int amazon_mei_init_module (void);
-//void amazon_mei_cleanup_module (void);
-//int __init init_module (void);
-//void __exit cleanup_module (void);
-
-int __init amazon_mei_init_module(void)
-//int __init init_module(void)
-{
- struct proc_dir_entry *entry;
- int i;
-
-//dying gasp-start
-#ifdef IFX_DYING_GASP
-
-//000003:fchang Start
-#ifdef CONFIG_CPU_AMAZON_E
- //GPIO31 :dying gasp event indication
- // (1) logic high: dying gasp event is false (default)
- // (2) logic low: dying gasp event is true
- CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4);
- CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4);
- CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4);
- SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4);
- asm("SYNC");
-#else //000003:fchang End
-
- //GPIO31 :dying gasp event indication
- // (1) logic high: dying gasp event is false (default)
- // (2) logic low: dying gasp event is true
- CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000);
- CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000);
- CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000);
- SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000);
-#if 0
-//warning-led-start
-//GPIO 22
- SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40);
- CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40);
- CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40);
- SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40);
- CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON
- printk("LED ON ON ON ON ON ON.....");
-//warning-led-end
-#endif
- asm("SYNC");
-#endif //000003:fchang
-
-#endif //IFX_DYING_GASP
-//dying gasp -end
-
-
- reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged
- {
- /* { flag, name, description } */
- { &arcmsgav, "arcmsgav", "arc to mei message ", 0 },
- { &cmv_reply, "cmv_reply", "cmv needs reply", 0},
- { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0},
- { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0},
- { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0},
- { &reply_count, "reply_count", "ARC to MEI Reply", 0},
- { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0},
- { (int *)8, "version", "version of firmware", 0},
- };
- memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp));
-
-
- //sema_init(&mei_sema, 0); // semaphore initialization, mutex
- sema_init(&mei_sema, 1); // semaphore initialization, mutex
-
- init_waitqueue_head(&wait_queue_arcmsgav); // for ARCMSGAV
- init_waitqueue_head(&wait_queue_codeswap); // for codeswap daemon
- init_waitqueue_head(&wait_queue_mibdaemon); // for mib daemon
- init_waitqueue_head(&wait_queue_reboot); // for ioctl reboot
- init_waitqueue_head(&wait_queue_clreoc); // for clreoc_wr function
- init_waitqueue_head(&wait_queue_loop_diagnostic); // for loop diagnostic function
-#ifdef ADSL_LED_SUPPORT
- init_waitqueue_head(&wait_queue_led); // adsl led for led function
- init_waitqueue_head(&wait_queue_led_polling); // adsl led for led function
- led_task.routine = adsl_led_flash_task; // adsl led for led function
- led_poll_init(); // adsl led for led function
-#endif //ADSL_LED_SUPPORT
-#ifdef IFX_DYING_GASP
- init_waitqueue_head(&wait_queue_dying_gasp); // IFX_DYING_GASP
- lop_poll_init(); // IFX_DYING_GASP
-#endif //IFX_DYING_GASP
-
- init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005
- unavailable_seconds_poll_init();//joelin 04/16/2005
- memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime)));
-
- // initialize link list for intervals
- mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL);
- if(mei_mib == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("kmalloc error for amazon_mei_mib\n\n");
-#endif
- return -1;
- }
- memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM));
- INIT_LIST_HEAD(&interval_list);
- for(i=0;i<INTERVAL_NUM;i++)
- list_add_tail(&(mei_mib[i].list), &interval_list);
- current_intvl = list_entry(interval_list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- // initialize clreoc list
- clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL);
- if(clreoc_pkt == NULL){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("kmalloc error for clreoc_pkt\n\n");
-#endif
- return -1;
- }
- memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE));
- INIT_LIST_HEAD(&clreoc_list);
- for(i=0;i<CLREOC_BUFF_SIZE;i++)
- list_add_tail(&(clreoc_pkt[i].list), &clreoc_list);
-
- memset(&AdslInitStatsData, 0, sizeof(AdslInitStatsData));
- if (register_chrdev(major, "amazon_mei", &mei_operations)!=0) {
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n unable to register major for amazon_mei!!!");
-#endif
- return -1;
- }
- if (request_irq(AMAZON_MEI_INT, mei_interrupt_arcmsgav,0, "amazon_mei_arcmsgav", NULL)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n unable to register irq for amazon_mei!!!");
-#endif
- return -1;
- }
-// disable_irq(AMAZON_MEI_INT);
- enable_irq(AMAZON_MEI_INT);
- // procfs
- meidir=proc_mkdir(MEI_DIRNAME, &proc_root);
- if ( meidir == NULL) {
-#ifdef AMAZON_MEI_DEBUG_ON
- printk(KERN_ERR ": can't create /proc/" MEI_DIRNAME "\n\n");
-#endif
- return(-ENOMEM);
- }
-
- for(i=0;i<NUM_OF_REG_ENTRY;i++) {
- entry = create_proc_entry(regs[i].name,
- S_IWUSR |S_IRUSR | S_IRGRP | S_IROTH,
- meidir);
- if(entry) {
- regs[i].low_ino = entry->low_ino;
- entry->proc_fops = &proc_operations;
- } else {
-#ifdef AMAZON_MEI_DEBUG_ON
- printk( KERN_ERR
- ": can't create /proc/" MEI_DIRNAME
- "/%s\n\n", regs[i].name);
-#endif
- return(-ENOMEM);
- }
- }
- ///////////////////////////////// register net device ////////////////////////////
- if(register_netdev(&phy_mei_net)!=0){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\n Register phy Device Failed.");
-#endif
- return -1;
- }
-/*
- if(register_netdev(&interleave_mei_net)!=0){
- printk("\n\n Register interleave Device Failed.");
- return -1;
- }
- if(register_netdev(&fast_mei_net)!=0){
- printk("\n\n Register fast Device Failed.");
- return -1;
- }
-*/
-#ifdef DFE_LOOPBACK
- mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL);
- if (mei_arc_swap_buff){
-#ifdef ARC_READY_ACK
- if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready
- {
- return -ERESTARTSYS;
- }
-#ifdef LOCK_RETRY
- reboot_lock = 1;
-#endif
-#endif
- meiForceRebootAdslModem();
- kfree(mei_arc_swap_buff);
- }else{
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("cannot load image: no memory\n\n");
-#endif
- }
-#endif
-#ifdef IFX_SMALL_FOOTPRINT
- mib_poll_init();
-#endif
- return 0;
-}
-
-void __exit amazon_mei_cleanup_module(void)
-//void __exit cleanup_module(void)
-{
- int i;
-#ifdef ADSL_LED_SUPPORT
- stop_led_module=1; //wake up and clean led module
- led_support_check=0;//joelin , clear task
- showtime=0;//joelin,clear task
- //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
- firmware_support_led=0;//joelin ,clear task
- wake_up_interruptible(&wait_queue_led); //wake up and clean led module
- wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module
-#endif
- for(i=0;i<NUM_OF_REG_ENTRY;i++)
- remove_proc_entry(regs[i].name, meidir);
- remove_proc_entry(MEI_DIRNAME, &proc_root);
-
- disable_irq(AMAZON_MEI_INT);
- free_irq(AMAZON_MEI_INT, NULL);
- unregister_chrdev(major, "amazon_mei");
-
- kfree(mei_mib);
- kfree(clreoc_pkt);
-
- kfree(phy_mei_net.priv);
- unregister_netdev(&phy_mei_net);
-
- return;
-}
-#ifdef IFX_SMALL_FOOTPRINT
-
-
-int adsl_mib_poll(void *unused)
-{
- struct task_struct *tsk = current;
- int i=0;
- struct timeval time_now;
- struct timeval time_fini;
- u32 temp,temp2;
-
- amazon_mei_mib * mib_ptr;
-// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4)));
- u16 * data=NULL; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read.
-
- daemonize();
- strcpy(tsk->comm, "kmibpoll");
- sigfillset(&tsk->blocked);
-
- printk("Inside mib poll loop ...\n");
- i=0;
- while(1){
- if(i<MIB_INTERVAL)
- interruptible_sleep_on_timeout(&wait_queue_mibdaemon, ((MIB_INTERVAL-i)/(1000/HZ)));
- i=0;
- if(showtime==1){
-// printk("\n\n update mib");
-
- do_gettimeofday(&time_now);
- if(time_now.tv_sec - current_intvl->start_time.tv_sec>=900){
- if(current_intvl->list.next!=&interval_list){
- current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- }
- else{
- mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list);
- list_del(interval_list.next);
- memset(mib_ptr, 0, sizeof(amazon_mei_mib));
- list_add_tail(&(mib_ptr->list), &interval_list);
- if(current_intvl->list.next==&interval_list)
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nlink list error");
-#endif
- current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list);
- do_gettimeofday(&(current_intvl->start_time));
- }
- }
-
- if(down_interruptible(&mei_sema))
- return -ERESTARTSYS;
-/*
- ATUC_PERF_LO_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 0 Index 0");
-#endif
- }
- else{
- if(RxMessage[4]&PLAM_LOS_FailureBit){
- current_intvl->AtucPerfLos++;
- ATUC_PERF_LOSS++;
- CurrStatus.adslAtucCurrStatus = 2;
- }
- if(RxMessage[4]&PLAM_LOF_FailureBit){
- current_intvl->AtucPerfLof++;
- ATUC_PERF_LOFS++;
- CurrStatus.adslAtucCurrStatus = 1;
- }
- if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit)))
- CurrStatus.adslAtucCurrStatus = 0;
- }
-*/
-
- if(showtime!=1)
- goto mib_poll_end;
- ATUC_PERF_ESS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 7 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS;
- if(temp>=0){
- current_intvl->AtucPerfEs+=temp;
- ATUC_PERF_ESS+=temp;
- mib_pread.ATUC_PERF_ESS = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
- ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4];
- mib_pread.ATUC_PERF_ESS = RxMessage[4];
- }
- }
-/*
- ATUR_PERF_LO_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 1 Index 0");
-#endif
- }
- else{
- if(RxMessage[4]&PLAM_LOS_FailureBit){
- current_intvl->AturPerfLos++;
- ATUR_PERF_LOSS++;
- CurrStatus.adslAturCurrStatus = 2;
- }
- if(RxMessage[4]&PLAM_LOF_FailureBit){
- current_intvl->AturPerfLof++;
- ATUR_PERF_LOFS++;
- CurrStatus.adslAturCurrStatus = 1;
- }
- if(RxMessage[4]&PLAM_LPR_FailureBit){
- current_intvl->AturPerfLpr++;
- ATUR_PERF_LPR++;
- CurrStatus.adslAturCurrStatus = 3;
- }
- if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit)))
- CurrStatus.adslAturCurrStatus = 0;
- }
-*/
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_PERF_ESS_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 33 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS;
- if(temp>=0){
- current_intvl->AturPerfEs+=temp;
- ATUR_PERF_ESS+=temp;
- mib_pread.ATUR_PERF_ESS = RxMessage[4];
- }
- else{
- current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
- ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4];
- mib_pread.ATUR_PERF_ESS=RxMessage[4];
- }
- }
- if(showtime!=1)
- goto mib_poll_end;
- // to update rx/tx blocks
- ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 20 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4];
- }
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 21 Index 0");
-#endif
- }
- else{
- temp2 = RxMessage[4];
- }
- if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){
- current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
- ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK;
- mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
- }
- else{
- current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
- ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16));
- mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16);
- }
- current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk;
- ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK;
-/*
- ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
- printk("\n\nCMV fail, Group 7 Address 20 Index 0");
- else{
- if(RxMessage[4]){
- current_intvl->AturChanPerfTxBlk+=RxMessage[4];
- ATUR_CHAN_TX_BLK+=RxMessage[4];
- }
- }
- ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS)
- printk("\n\nCMV fail, Group 7 Address 21 Index 0");
- else{
- if(RxMessage[4]){
- current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16);
- ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16);
- }
- }
-*/
- if(chantype.interleave == 1){
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 3 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL;
- if(temp>=0){
- current_intvl->AturChanPerfCorrBlk+=temp;
- ATUR_CHAN_CORR_BLK+=temp;
- mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
- ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4];
- mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4];
- }
- }
- }
- else if(chantype.fast == 1){
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 3 Index 1");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST;
- if(temp>=0){
- current_intvl->AturChanPerfCorrBlk+=temp;
- ATUR_CHAN_CORR_BLK+=temp;
- mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
- ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4];
- mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4];
- }
- }
- }
-
- if(chantype.interleave == 1){
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 2 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL;
- if(temp>=0){
- current_intvl->AturChanPerfUncorrBlk+=temp;
- ATUR_CHAN_UNCORR_BLK+=temp;
- mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
- ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4];
- mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4];
- }
- }
- }
- else if(chantype.fast == 1){
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 2 Index 1");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST;
- if(temp>=0){
- current_intvl->AturChanPerfUncorrBlk+=temp;
- ATUR_CHAN_UNCORR_BLK+=temp;
- mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
- }
- else{
- current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
- ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4];
- mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4];
- }
- }
- }
-
- //RFC-3440
-
-#ifdef AMAZON_MEI_MIB_RFC3440
- if(showtime!=1)
- goto mib_poll_end;
- ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //???
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR;
- if(temp>=0){
- current_intvl->AtucPerfStatFastR+=temp;
- ATUC_PERF_STAT_FASTR+=temp;
- mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
- ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4];
- }
- }
- if(showtime!=1)
- goto mib_poll_end;
- ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //???
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 0 Address 0 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR;
- if(temp>=0){
- current_intvl->AtucPerfStatFailedFastR+=temp;
- ATUC_PERF_STAT_FAILED_FASTR+=temp;
- mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
- ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4];
- }
- }
- if(showtime!=1)
- goto mib_poll_end;
- ATUC_PERF_STAT_SESL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 8 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL;
- if(temp>=0){
- current_intvl->AtucPerfStatSesL+=temp;
- ATUC_PERF_STAT_SESL+=temp;
- mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
- ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4];
- }
- }
- if(showtime!=1)
- goto mib_poll_end;
- ATUC_PERF_STAT_UASL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 10 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL;
- if(temp>=0){
- current_intvl->AtucPerfStatUasL+=temp;
- ATUC_PERF_STAT_UASL+=temp;
- mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
- ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4];
- mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4];
- }
- }
- if(showtime!=1)
- goto mib_poll_end;
- ATUR_PERF_STAT_SESL_FLAG_MAKECMV;
- if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){
-#ifdef AMAZON_MEI_DEBUG_ON
- printk("\n\nCMV fail, Group 7 Address 34 Index 0");
-#endif
- }
- else{
- temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL;
- if(temp>=0){
- current_intvl->AtucPerfStatUasL+=temp;
- ATUC_PERF_STAT_UASL+=temp;
- mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
- }
- else{
- current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
- ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4];
- mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4];
- }
- }
-
-#endif
-mib_poll_end:
- up(&mei_sema);
-
- do_gettimeofday(&time_fini);
- i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec
- }//showtime==1
- }
-
-}
-int mib_poll_init(void)
-{
- printk("Starting mib_poll...\n");
-
- kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
- return 0;
-}
-#endif //IFX_SMALL_FOOTPRINT
-//EXPORT_NO_SYMBOLS;
-
-#ifdef ADSL_LED_SUPPORT
-// adsl led -start
-int led_status_on=0,led_need_to_flash=0;
-int led_current_flashing=0;
-unsigned long led_delay=0;
-static int led_poll(void *unused)
-{
- stop_led_module=0; //begin polling ...
- while(!stop_led_module){
- if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup
-// else printk("direct running task, no waiting");
- run_task_queue(&tq_ifx_led);//joelin task
-// printk("led and LOP polling...\n");
- }
- return 0;
-}
-static int led_poll_init(void)
-{
-// printk("Starting adsl led polling...\n");
-
-//warning-led-start
-// CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON
-//warning-led-end
-
- kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
- return 0;
-}
-
-int adsl_led_flash(void)
-{
- int i;
- if (!firmware_support_led) return 0; //joelin version check
-
- if (led_status_on == 0 && led_need_to_flash == 0)
- {
- queue_task(&led_task, &tq_ifx_led);//joelin task
- wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module
-// printk("queue Task 1...\n"); //joelin test
- }
- led_need_to_flash=1;//asking to flash led
-
- return 0;
-}
-
-int adsl_led_flash_task(void *ptr)
-{
-
- u16 one=1;
- u16 zero=0;
- u16 data=0x0600;
- int kernel_use=1;
- u16 CMVMSG[MSG_LENGTH];
-//adsl-led-start for >v1.1.2.7.1.1
-// printk("Task Running...\n"); //joelin test
- if ((firmware_support_led==2)&&(led_support_check))
- {
- led_support_check=0;
- data=0x0600;
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG); //configure GPIO9 GPIO10 as outputs
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG); //enable writing to bit 9 and bit10
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-
- data=0x0a01;
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG); //use GPIO10 for TR68 .Enable and don't invert.
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-
-#ifdef DATA_LED_ON_MODE
- data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
-#else
- data=0x0900;
-#endif
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .turn off.
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG);
-
- }
- if (!showtime) {led_need_to_flash=0; return 0;}
-//adsl-led-end for >v1.1.2.7.1.1
-
- if (led_status_on == 0 || led_need_to_flash == 1)
- {
-
- if (led_current_flashing==0)
- {
- if (firmware_support_led==1){//>1.1.2.3.1.1
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG); //flash
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
- }
- else if (firmware_support_led==2){//>1.1.2.7.1.1
- data=0x0901;//flash
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .flash.
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
-
- }//(firmware_support_led==2)
- led_current_flashing = 1;//turn on led
- }
- led_status_on=1;
-
- do{//do nothing , waiting untill no data traffic
- led_need_to_flash=0;
- interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic
- }while(led_need_to_flash==1);
-
- }else if (led_status_on == 1 && led_need_to_flash==0)
- {
- if (led_current_flashing==1)
- {//turn off led
- if (firmware_support_led==1){//>1.1.2.3.1.1
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
- } //>1.1.2.3.1.1
- else if (firmware_support_led==2){//>1.1.2.7.1.1
-#ifdef DATA_LED_ON_MODE
- data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on.
-#else
- data=0x0900;//off
-#endif
- makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .off.
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG);
-
- }//(firmware_support_led==2)
- led_status_on=0;
- led_current_flashing = 0;
- }
- }
-
- if (led_status_on == 1 || led_need_to_flash)
- {//led flash job on going or led need to flash
- queue_task(&led_task, &tq_ifx_led); //joelin task
-// printk("queue Task 2...\n"); //joelin test
- }
- return 0;
-}
-//joelin adsl led-end
-#else
-int adsl_led_flash(void)
-{
- return 0;
-}
-#endif //ADSL_LED_SUPPORT
-#ifdef IFX_DYING_GASP
-static int lop_poll(void *unused)
-{
-
- while(1)
- {
- interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1);
-#ifdef CONFIG_CPU_AMAZON_E //000003:fchang
- if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0) {//000003:fchang
-#else //000003:fchang
- if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) {
-#endif //CONFIG_CPU_AMAZON_E
- mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr);
- printk("send dying gasp..\n");}
-
- }
- return 0;
- }
-static int lop_poll_init(void)
-{
-// printk("Starting LOP polling...\n");
- kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
- return 0;
-}
-
-#endif //IFX_DYING_GASP
-
-//joelin 04/16/2005-satrt
-static int unavailable_seconds_poll(void *unused)
-{
- while(1){
- interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup
- if (!showtime) unavailable_seconds++;
- }
- return 0;
-}
-static int unavailable_seconds_poll_init(void)
-{
-
- kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
- return 0;
-}
-
-
-//joelin 04/16/2005-end
-EXPORT_SYMBOL(meiDebugWrite);
-EXPORT_SYMBOL(ifx_pop_eoc);
-
-MODULE_LICENSE("GPL");
-
-module_init(amazon_mei_init_module);
-module_exit(amazon_mei_cleanup_module);
-
diff --git a/target/linux/amazon/files/drivers/char/ifx_ssc.c b/target/linux/amazon/files/drivers/char/ifx_ssc.c
deleted file mode 100644
index ea01659a94..0000000000
--- a/target/linux/amazon/files/drivers/char/ifx_ssc.c
+++ /dev/null
@@ -1,2121 +0,0 @@
-/**************************************************
- *
- * drivers/ifx/serial/ifx_ssc.c
- *
- * Driver for IFX_SSC serial ports
- *
- * Copyright (C) 2004 Infineon Technologies AG
- * Author Michael Schoenenborn (IFX COM TI BT)
- *
- */
-#define IFX_SSC_DRV_VERSION "0.2.1"
-/*
- **************************************************
- *
- * This driver was originally based on the INCA-IP driver, but due to
- * fundamental conceptual drawbacks there has been changed a lot.
- *
- * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de>
- * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-// ### TO DO: general issues:
-// - power management
-// - interrupt handling (direct/indirect)
-// - pin/mux-handling (just overall concept due to project dependency)
-// - multiple instances capability
-// - slave functionality
-
-/*
- * Include section
- */
-#ifndef EXPORT_SYMTAB
-#define EXPORT_SYMTAB
-#endif
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-//#include <linux/poll.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/ifx_ssc_defines.h>
-#include <asm/amazon/ifx_ssc.h>
-
-#ifdef SSC_FRAME_INT_ENABLE
-#undef SSC_FRAME_INT_ENABLE
-#endif
-
-#define not_yet
-
-#define SPI_VINETIC
-
-/*
- * Deal with CONFIG_MODVERSIONS
- */
-#if CONFIG_MODVERSIONS==1
-# include <linux/modversions.h>
-#endif
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Schoenenborn");
-MODULE_DESCRIPTION("IFX SSC driver");
-MODULE_SUPPORTED_DEVICE("ifx_ssc");
-MODULE_PARM(maj, "i");
-MODULE_PARM_DESC(maj, "Major device number");
-
-/* allow the user to set the major device number */
-static int maj = 0;
-
-
-/*
- * This is the per-channel data structure containing pointers, flags
- * and variables for the port. This driver supports a maximum of PORT_CNT.
- * isp is allocated in ifx_ssc_init() based on the chip version.
- */
-static struct ifx_ssc_port *isp;
-
-/* prototypes for fops */
-static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *);
-static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *);
-//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *);
-int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-int ifx_ssc_open(struct inode *, struct file *);
-int ifx_ssc_close(struct inode *, struct file *);
-
-/* other forward declarations */
-static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info);
-static void ifx_ssc_rx_int(int, void *, struct pt_regs *);
-static void ifx_ssc_tx_int(int, void *, struct pt_regs *);
-static void ifx_ssc_err_int(int, void *, struct pt_regs *);
-#ifdef SSC_FRAME_INT_ENABLE
-static void ifx_ssc_frm_int(int, void *, struct pt_regs *);
-#endif
-static void tx_int(struct ifx_ssc_port *);
-static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *);
-static void ifx_gpio_init(void);
-/************************************************************************
- * Function declaration
- ************************************************************************/
-//interrupt.c
-extern unsigned int amazon_get_fpi_hz(void);
-extern void disable_amazon_irq(unsigned int irq_nr);
-extern void enable_amazon_irq(unsigned int irq_nr);
-extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
-
-
-/*****************************************************************/
-typedef struct {
- int (*request)(unsigned int irq,
- void (*handler)(int, void *, struct pt_regs *),
- unsigned long irqflags,
- const char * devname,
- void *dev_id);
- void (*free)(unsigned int irq, void *dev_id);
- void (*enable)(unsigned int irq);
- void (*disable)(unsigned int irq);
- void (*clear)(unsigned int irq);
-} ifx_int_wrapper_t;
-
-static ifx_int_wrapper_t ifx_int_wrapper = {
- request: request_irq, // IM action: enable int
- free: free_irq, // IM action: disable int
- enable: enable_amazon_irq,
- disable: disable_amazon_irq,
- clear: mask_and_ack_amazon_irq,
- //end:
-};
-
-/* Fops-struct */
-static struct file_operations ifx_ssc_fops = {
- owner: THIS_MODULE,
- read: ifx_ssc_read, /* read */
- write: ifx_ssc_write, /* write */
-// poll: ifx_ssc_poll, /* poll */
- ioctl: ifx_ssc_ioctl, /* ioctl */
- open: ifx_ssc_open, /* open */
- release: ifx_ssc_close, /* release */
-};
-
-
-static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info)
-{ // ATTENTION: This function assumes that the CLC register is set with the
- // appropriate value for RMC.
- unsigned int rmc;
-
- rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) &
- IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET;
- if (rmc == 0){
- printk("ifx_ssc_get_kernel_clk rmc==0 \n");
- return (0);
- }
- return (amazon_get_fpi_hz() / rmc);
-}
-
-#ifndef not_yet
-#ifdef IFX_SSC_INT_USE_BH
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver
- * (also known as the "bottom half"). This can be called any
- * number of times for any channel without harm.
- */
-static inline void
-ifx_ssc_sched_event(struct ifx_ssc_port *info, int event)
-{
- info->event |= 1 << event; /* remember what kind of event and who */
- queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */
- mark_bh(CYCLADES_BH); /* then trigger event */
-} /* ifx_ssc_sched_event */
-
-
-/*
- * This routine is used to handle the "bottom half" processing for the
- * serial driver, known also the "software interrupt" processing.
- * This processing is done at the kernel interrupt level, after the
- * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
- * is where time-consuming activities which can not be done in the
- * interrupt driver proper are done; the interrupt driver schedules
- * them using ifx_ssc_sched_event(), and they get done here.
- *
- * This is done through one level of indirection--the task queue.
- * When a hardware interrupt service routine wants service by the
- * driver's bottom half, it enqueues the appropriate tq_struct (one
- * per port) to the tq_cyclades work queue and sets a request flag
- * via mark_bh for processing that queue. When the time is right,
- * do_ifx_ssc_bh is called (because of the mark_bh) and it requests
- * that the work queue be processed.
- *
- * Although this may seem unwieldy, it gives the system a way to
- * pass an argument (in this case the pointer to the ifx_ssc_port
- * structure) to the bottom half of the driver. Previous kernels
- * had to poll every port to see if that port needed servicing.
- */
-static void
-do_ifx_ssc_bh(void)
-{
- run_task_queue(&tq_cyclades);
-} /* do_ifx_ssc_bh */
-
-static void
-do_softint(void *private_)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_;
-
- if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) {
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|
- ASYNC_CALLOUT_ACTIVE);
- }
- if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->open_wait);
- }
- if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->delta_msr_wait);
- }
- if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) {
- wake_up_interruptible(&tty->write_wait);
- }
-#ifdef Z_WAKE
- if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) {
- wake_up_interruptible(&info->shutdown_wait);
- }
-#endif
-} /* do_softint */
-#endif /* IFX_SSC_INT_USE_BH */
-#endif // not_yet
-
-inline static void
-rx_int(struct ifx_ssc_port *info)
-{
- int fifo_fill_lev, bytes_in_buf, i;
- unsigned long tmp_val;
- unsigned long *tmp_ptr;
- unsigned int rx_valid_cnt;
- /* number of words waiting in the RX FIFO */
- fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase +
- IFX_SSC_FSTAT) &
- IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >>
- IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET;
- // Note: There are always 32 bits in a fifo-entry except for the last
- // word of a contigous transfer block and except for not in rx-only
- // mode and CON.ENBV set. But for this case it should be a convention
- // in software which helps:
- // In tx or rx/tx mode all transfers from the buffer to the FIFO are
- // 32-bit wide, except for the last three bytes, which could be a
- // combination of 16- and 8-bit access.
- // => The whole block is received as 32-bit words as a contigous stream,
- // even if there was a gap in tx which has the fifo run out of data!
- // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)!
-
- /* free space in the RX buffer */
- bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr;
- // transfer with 32 bits per entry
- while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) {
- tmp_ptr = (unsigned long *)info->rxbuf_ptr;
- *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
- info->rxbuf_ptr += 4;
- info->stats.rxBytes += 4;
- fifo_fill_lev --;
- bytes_in_buf -= 4;
- } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0))
- // now do the rest as mentioned in STATE.RXBV
- while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) {
- rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) &
- IFX_SSC_STATE_RX_BYTE_VALID_MASK) >>
- IFX_SSC_STATE_RX_BYTE_VALID_OFFSET;
- if (rx_valid_cnt == 0) break;
- if (rx_valid_cnt > bytes_in_buf) {
- // ### TO DO: warning message: not block aligned data, other data
- // in this entry will be lost
- rx_valid_cnt = bytes_in_buf;
- }
- tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB);
-
- for (i=0; i<rx_valid_cnt; i++) {
- *info->rxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff;
-/*
- *info->rxbuf_ptr = tmp_val & 0xff;
- tmp_val >>= 8;
-*/
- bytes_in_buf--;
-
-
- info->rxbuf_ptr++;
- }
- info->stats.rxBytes += rx_valid_cnt;
- } // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0))
-
- // check if transfer is complete
- if (info->rxbuf_ptr >= info->rxbuf_end) {
- ifx_int_wrapper.disable(info->rxirq);
- /* wakeup any processes waiting in read() */
- wake_up_interruptible(&info->rwait);
- /* and in poll() */
- //wake_up_interruptible(&info->pwait);
- } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) &&
- (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) {
- // if buffer not filled completely and rx request done initiate new transfer
-/*
- if (info->rxbuf_end - info->rxbuf_ptr < 65536)
-*/
- if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE)
- WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) <<
- IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- else
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- }
-} // rx_int
-
-inline static void
-tx_int(struct ifx_ssc_port *info)
-{
-
- int fifo_space, fill, i;
- fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) &
- IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) -
- ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) &
- IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >>
- IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET);
-
- if (fifo_space == 0)
- return;
-
- fill = info->txbuf_end - info->txbuf_ptr;
-
- if (fill > fifo_space * 4)
- fill = fifo_space * 4;
-
- for (i = 0; i < fill / 4; i++) {
- // at first 32 bit access
- WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr += 4;
- }
-
- fifo_space -= fill / 4;
- info->stats.txBytes += fill & ~0x3;
- fill &= 0x3;
- if ((fifo_space > 0) & (fill > 1)) {
- // trailing 16 bit access
- WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr += 2;
- info->stats.txBytes += 2;
- fifo_space --;
-/* added by bingtao */
- fill -=2;
- }
- if ((fifo_space > 0) & (fill > 0)) {
- // trailing 8 bit access
- WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr ++;
- info->stats.txBytes ++;
-/*
- fifo_space --;
-*/
- }
-
- // check if transmission complete
- if (info->txbuf_ptr >= info->txbuf_end) {
- ifx_int_wrapper.disable(info->txirq);
- kfree(info->txbuf);
- info->txbuf = NULL;
- /* wake up any process waiting in poll() */
- //wake_up_interruptible(&info->pwait);
- }
-
-} // tx_int
-
-static void
-ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
- //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR);
- rx_int(info);
-}
-
-static void
-ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
- //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR);
- tx_int(info);
-}
-
-static void
-ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id;
- unsigned int state;
- unsigned int write_back = 0;
- unsigned long flags;
-
-
- local_irq_save(flags);
- state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE);
-
- if ((state & IFX_SSC_STATE_RX_UFL) != 0) {
- info->stats.rxUnErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR;
- }
- if ((state & IFX_SSC_STATE_RX_OFL) != 0) {
- info->stats.rxOvErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR;
- }
- if ((state & IFX_SSC_STATE_TX_OFL) != 0) {
- info->stats.txOvErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR;
- }
- if ((state & IFX_SSC_STATE_TX_UFL) != 0) {
- info->stats.txUnErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR;
- }
-// if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) {
-// info->stats.abortErr++;
-// write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR;
-// }
- if ((state & IFX_SSC_STATE_MODE_ERR) != 0) {
- info->stats.modeErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR;
- }
-
- if (write_back)
- WRITE_PERIPHERAL_REGISTER(write_back,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- local_irq_restore(flags);
-}
-
-#ifdef SSC_FRAME_INT_ENABLE
-static void
-ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs)
-{
- // ### TO DO: wake up framing wait-queue in conjunction with batch execution
-}
-#endif
-
-static void
-ifx_ssc_abort(struct ifx_ssc_port *info)
-{
- unsigned long flags;
- bool enabled;
-
- local_irq_save(flags);
-
- // disable all int's
- ifx_int_wrapper.disable(info->rxirq);
- ifx_int_wrapper.disable(info->txirq);
- ifx_int_wrapper.disable(info->errirq);
-/*
- ifx_int_wrapper.disable(info->frmirq);
-*/
- local_irq_restore(flags);
-
- // disable SSC (also aborts a receive request!)
- // ### TO DO: Perhaps it's better to abort after the receiption of a
- // complete word. The disable cuts the transmission immediatly and
- // releases the chip selects. This could result in unpredictable
- // behavior of connected external devices!
- enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
-
- // flush fifos
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH,
- info->mapbase + IFX_SSC_TXFCON);
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH,
- info->mapbase + IFX_SSC_RXFCON);
-
- // free txbuf
- if (info->txbuf != NULL) {
- kfree(info->txbuf);
- info->txbuf = NULL;
- }
-
- // wakeup read process
- if (info->rxbuf != NULL)
- wake_up_interruptible(&info->rwait);
-
- // clear pending int's
- ifx_int_wrapper.clear(info->rxirq);
- ifx_int_wrapper.clear(info->txirq);
- ifx_int_wrapper.clear(info->errirq);
-/*
- ifx_int_wrapper.clear(info->frmirq);
-*/
-
- // clear error flags
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- //printk("IFX SSC%d: Transmission aborted\n", info->port_nr);
- // enable SSC
- if (enabled)
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
-} // ifx_ssc_abort
-
-
-/*
- * This routine is called whenever a port is opened. It enforces
- * exclusive opening of a port and enables interrupts, etc.
- */
-int
-ifx_ssc_open(struct inode *inode, struct file * filp)
-{
- struct ifx_ssc_port *info;
- int line;
- int from_kernel = 0;
-
- if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) {
- from_kernel = 1;
- line = (int)inode;
- }
- else {
- line = MINOR(filp->f_dentry->d_inode->i_rdev);
- filp->f_op = &ifx_ssc_fops;
- }
-
- /* don't open more minor devices than we can support */
- if (line < 0 || line >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[line];
-
- /* exclusive open */
- if (info->port_is_open != 0)
- return -EBUSY;
- info->port_is_open++;
-
- ifx_int_wrapper.disable(info->rxirq);
- ifx_int_wrapper.disable(info->txirq);
- ifx_int_wrapper.disable(info->errirq);
-/*
- ifx_int_wrapper.disable(info->frmirq);
-*/
-
- /* Flush and enable TX/RX FIFO */
- WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_FLUSH |
- IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_TXFCON);
- WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_FLUSH |
- IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_RXFCON);
-
-
- /* logically flush the software FIFOs */
- info->rxbuf_ptr = 0;
- info->txbuf_ptr = 0;
-
- /* clear all error bits */
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- // clear pending interrupts
- ifx_int_wrapper.clear(info->rxirq);
- ifx_int_wrapper.clear(info->txirq);
- ifx_int_wrapper.clear(info->errirq);
-/*
- ifx_int_wrapper.clear(info->frmirq);
-*/
-
- // enable SSC
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- MOD_INC_USE_COUNT;
-
- return 0;
-} /* ifx_ssc_open */
-EXPORT_SYMBOL(ifx_ssc_open);
-
-/*
- * This routine is called when a particular device is closed.
- */
-int
-ifx_ssc_close(struct inode *inode, struct file *filp)
-{
- struct ifx_ssc_port *info;
- int idx;
-
- if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
- idx = (int)inode;
- else
- idx = MINOR(filp->f_dentry->d_inode->i_rdev);
-
- if (idx < 0 || idx >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[idx];
- if (!info)
- return -ENXIO;
-
- // disable SSC
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- // call abort function to disable int's, flush fifos...
- ifx_ssc_abort(info);
-
- info->port_is_open --;
- MOD_DEC_USE_COUNT;
-
- return 0;
-} /* ifx_ssc_close */
-EXPORT_SYMBOL(ifx_ssc_close);
-
-/* added by bingtao */
-/* helper routine to handle reads from the kernel or user-space */
-/* info->rxbuf : never kfree and contains valid data */
-/* should be points to NULL after copying data !!! */
-static ssize_t
-ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len,
- int from_kernel)
-{
- ssize_t ret_val;
- unsigned long flags;
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- return -EFAULT;
- local_irq_save(flags);
- info->rxbuf_ptr = info->rxbuf;
- info->rxbuf_end = info->rxbuf + len;
- local_irq_restore(flags);
-/* Vinetic driver always works in IFX_SSC_MODE_RXTX */
-/* TXRX in poll mode */
- while (info->rxbuf_ptr < info->rxbuf_end){
-/* This is the key point, if you don't check this condition
- kfree (NULL) will happen
- because tx only need write into FIFO, it's much fast than rx
- So when rx still waiting , tx already finish and release buf
-*/
- if (info->txbuf_ptr < info->txbuf_end) {
- tx_int(info);
- }
-
- rx_int(info);
- };
-
- ret_val = info->rxbuf_ptr - info->rxbuf;
- return (ret_val);
-} // ifx_ssc_read_helper_poll
-
-/* helper routine to handle reads from the kernel or user-space */
-/* info->rx_buf : never kfree and contains valid data */
-/* should be points to NULL after copying data !!! */
-static ssize_t
-ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
- int from_kernel)
-{
- ssize_t ret_val;
- unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- return -EFAULT;
- local_irq_save(flags);
- info->rxbuf_ptr = info->rxbuf;
- info->rxbuf_end = info->rxbuf + len;
- if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
- if ((info->txbuf == NULL) ||
- (info->txbuf != info->txbuf_ptr) ||
- (info->txbuf_end != len + info->txbuf)) {
- local_irq_restore(flags);
- printk("IFX SSC - %s: write must be called before calling "
- "read in combined RX/TX!\n", __FUNCTION__);
- return -EFAULT;
- }
- local_irq_restore(flags);
- /* should enable tx, right?*/
- tx_int(info);
- if (info->txbuf_ptr < info->txbuf_end){
- ifx_int_wrapper.enable(info->txirq);
- }
-
- ifx_int_wrapper.enable(info->rxirq);
- } else { // rx mode
- local_irq_restore(flags);
- if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
- IFX_SSC_RXCNT_TODO_MASK)
- return -EBUSY;
- ifx_int_wrapper.enable(info->rxirq);
- // rx request limited to ' bytes
-/*
- if (len < 65536)
-*/
- if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
- WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- else
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- }
-
- __add_wait_queue(&info->rwait, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- // wakeup done in rx_int
-
- do {
- local_irq_save(flags);
- if (info->rxbuf_ptr >= info->rxbuf_end)
- break;
- local_irq_restore(flags);
-
-// if (filp->f_flags & O_NONBLOCK)
-// {
-// N = -EAGAIN;
-// goto out;
-// }
- if (signal_pending(current)) {
- ret_val = -ERESTARTSYS;
- goto out;
- }
- schedule();
- } while (1);
-
- ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
- local_irq_restore(flags);
-
- out:
- current->state = TASK_RUNNING;
- __remove_wait_queue(&info->rwait, &wait);
- return (ret_val);
-} // ifx_ssc_read_helper
-
-
-#if 0
-/* helper routine to handle reads from the kernel or user-space */
-/* appropriate in interrupt context */
-static ssize_t
-ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len,
- int from_kernel)
-{
- ssize_t ret_val;
- unsigned long flags;
- DECLARE_WAITQUEUE(wait, current);
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- return -EFAULT;
- local_irq_save(flags);
- info->rxbuf_ptr = info->rxbuf;
- info->rxbuf_end = info->rxbuf + len;
- if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
- if ((info->txbuf == NULL) ||
- (info->txbuf != info->txbuf_ptr) ||
- (info->txbuf_end != len + info->txbuf)) {
- local_irq_restore(flags);
- printk("IFX SSC - %s: write must be called before calling "
- "read in combined RX/TX!\n", __FUNCTION__);
- return -EFAULT;
- }
- local_irq_restore(flags);
- /* should enable tx, right?*/
- tx_int(info);
- if (!in_irq()){
- if (info->txbuf_ptr < info->txbuf_end){
- ifx_int_wrapper.enable(info->txirq);
- }
- ifx_int_wrapper.enable(info->rxirq);
- }
- } else { // rx mode
- local_irq_restore(flags);
- if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) &
- IFX_SSC_RXCNT_TODO_MASK)
- return -EBUSY;
- if (!in_irq()){
- ifx_int_wrapper.enable(info->rxirq);
- }
-
- if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
- WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- else
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET,
- info->mapbase + IFX_SSC_RXREQ);
- }
- if (in_irq()){
- do {
- rx_int(info);
- if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) {
- tx_int(info);
- }
-
- if (info->rxbuf_ptr >= info->rxbuf_end)
- break;
- } while (1);
- ret_val = info->rxbuf_ptr - info->rxbuf;
- }else{
- __add_wait_queue(&info->rwait, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- // wakeup done in rx_int
-
- do {
- local_irq_save(flags);
- if (info->rxbuf_ptr >= info->rxbuf_end)
- break;
- local_irq_restore(flags);
-
- if (signal_pending(current)) {
- ret_val = -ERESTARTSYS;
- goto out;
- }
- schedule();
- } while (1);
-
- ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len
- local_irq_restore(flags);
-
- out:
- current->state = TASK_RUNNING;
- __remove_wait_queue(&info->rwait, &wait);
- }
- return (ret_val);
-} // ifx_ssc_read_helper
-#endif
-
-/* helper routine to handle writes to the kernel or user-space */
-/* info->txbuf has two cases:
- * 1) return value < 0 (-EFAULT), not touched at all
- * 2) kfree and points to NULL in interrupt routine (but maybe later )
- */
-static ssize_t
-ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf,
- size_t len, int from_kernel)
-{
- // check if in tx or tx/rx mode
- if (info->opts.modeRxTx == IFX_SSC_MODE_RX)
- return -EFAULT;
-
- info->txbuf_ptr = info->txbuf;
- info->txbuf_end = len + info->txbuf;
- /* start the transmission (not in rx/tx, see read helper) */
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX) {
- tx_int(info);
- if (info->txbuf_ptr < info->txbuf_end){
- ifx_int_wrapper.enable(info->txirq);
- }
- }
- //local_irq_restore(flags);
- return len;
-}
-
-/*
- * kernel interfaces for read and write.
- * The caller must set port to: n for SSC<m> with n=m-1 (e.g. n=0 for SSC1)
- */
-ssize_t
-ifx_ssc_kread(int port, char *kbuf, size_t len)
-{
- struct ifx_ssc_port *info;
- ssize_t ret_val;
-
- if (port < 0 || port >= PORT_CNT)
- return -ENXIO;
-
- if (len == 0)
- return 0;
-
- info = &isp[port];
-
- // check if reception in progress
- if (info->rxbuf != NULL){
- printk("SSC device busy\n");
- return -EBUSY;
- }
-
- info->rxbuf = kbuf;
- if (info->rxbuf == NULL){
- printk("SSC device error\n");
- return -EINVAL;
- }
-
-/* changed by bingtao */
- /* change by TaiCheng */
- //if (!in_irq()){
- if (0){
- ret_val = ifx_ssc_read_helper(info, kbuf, len, 1);
- }else{
- ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1);
- };
- info->rxbuf = NULL;
-
- // ### TO DO: perhaps warn if ret_val != len
- ifx_int_wrapper.disable(info->rxirq);
-
- return (ret_val);
-} // ifx_ssc_kread
-EXPORT_SYMBOL(ifx_ssc_kread);
-
-ssize_t
-ifx_ssc_kwrite(int port, const char *kbuf, size_t len)
-{
- struct ifx_ssc_port *info;
- ssize_t ret_val;
-
- if (port < 0 || port >= PORT_CNT)
- return -ENXIO;
-
- if (len == 0)
- return 0;
-
- info = &isp[port];
-
- // check if transmission in progress
- if (info->txbuf != NULL)
- return -EBUSY;
- info->txbuf = (char *)kbuf;
-
- ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1);
- if (ret_val < 0){
- info->txbuf = NULL;
- }
- return ret_val;
-}
-EXPORT_SYMBOL(ifx_ssc_kwrite);
-
-
-/*
- * user interfaces to read and write
- */
-static ssize_t
-ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off)
-{
- ssize_t ret_val;
- int idx;
- struct ifx_ssc_port *info;
-
-/*
- if (len == 0)
- return (0);
-*/
- idx = MINOR(filp->f_dentry->d_inode->i_rdev);
- info = &isp[idx];
-
- // check if reception in progress
- if (info->rxbuf != NULL)
- return -EBUSY;
-
- info->rxbuf = kmalloc(len+ 3, GFP_KERNEL);
- if (info->rxbuf == NULL)
- return -ENOMEM;
-
- ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0);
- // ### TO DO: perhaps warn if ret_val != len
- if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0)
- ret_val = -EFAULT;
-
- ifx_int_wrapper.disable(info->rxirq);
-
- kfree(info->rxbuf);
- info->rxbuf = NULL;
- return (ret_val);
-} // ifx_ssc_read
-
-/*
- * As many bytes as we have free space for are copied from the user
- * into txbuf and the actual byte count is returned. The transmission is
- * always kicked off by calling the appropriate TX routine.
- */
-static ssize_t
-ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off)
-{
- int idx;
- struct ifx_ssc_port *info;
- int ret_val;
-
- if (len == 0)
- return (0);
-
- idx = MINOR(filp->f_dentry->d_inode->i_rdev);
- info = &isp[idx];
-
- // check if transmission in progress
- if (info->txbuf != NULL)
- return -EBUSY;
-
- info->txbuf = kmalloc(len+ 3, GFP_KERNEL);
- if (info->txbuf == NULL)
- return -ENOMEM;
-
- ret_val = copy_from_user(info->txbuf, ubuf, len);
- if (ret_val == 0)
- ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0);
- else
- ret_val = -EFAULT;
- if (ret_val < 0) {
- kfree(info->txbuf); // otherwise will be done in ISR
- info->txbuf = NULL;
- }
- return (ret_val);
-} /* ifx_ssc_write */
-
-
-/*
- * ------------------------------------------------------------
- * ifx_ssc_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME : ifx_ssc_frm_status_get
- LONG-NAME : framing status get
- PURPOSE : Get the actual status of the framing.
-
- PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
-
- RESULT : pointer to a structure ifx_ssc_frm_status which holds busy and
- count values.
-
- REMARKS : Returns a register value independent of framing is enabled or
- not! Changes structure inside of info, so the return value isn't
- needed at all, but could be used for simple access.
------------------------------------------------------------------------------*/
-static struct ifx_ssc_frm_status *
-ifx_ssc_frm_status_get(struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT);
- info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0;
- info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0;
- info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK)
- >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET;
- info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK)
- >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET;
- tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
- info->frm_status.EnIntAfterData =
- (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0;
- info->frm_status.EnIntAfterPause =
- (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0;
- return (&info->frm_status);
-} // ifx_ssc_frm_status_get
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME : ifx_ssc_frm_control_get
- LONG-NAME : framing control get
- PURPOSE : Get the actual control values of the framing.
-
- PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
-
- RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits
- and count reload values.
-
- REMARKS : Changes structure inside of info, so the return value isn't
- needed at all, but could be used for simple access.
------------------------------------------------------------------------------*/
-static struct ifx_ssc_frm_opts *
-ifx_ssc_frm_control_get(struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON);
- info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0;
- info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK)
- >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
- info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
- >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
- info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK)
- >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
- info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK)
- >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
- info->frm_opts.StopAfterPause =
- (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0;
- return (&info->frm_opts);
-} // ifx_ssc_frm_control_get
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME : ifx_ssc_frm_control_set
- LONG-NAME : framing control set
- PURPOSE : Set the actual control values of the framing.
-
- PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
-
- RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits
- and count reload values.
-
- REMARKS :
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_frm_control_set(struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- // check parameters
- if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) ||
- (info->frm_opts.DataLength < 1) ||
- (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) ||
- (info->frm_opts.PauseLength < 1) ||
- ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >>
- IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) ||
- ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >>
- IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 ))
- return -EINVAL;
-
- // read interrupt bits (they're not changed here)
- tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) &
- (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE |
- IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
-
- // set all values with respect to it's bit position (for data and pause
- // length set N-1)
- tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
- tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
- tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
- tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
- tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
- tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
-
- WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
-
- return 0;
-} // ifx_ssc_frm_control_set
-
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME : ifx_ssc_rxtx_mode_set
- LONG-NAME : rxtx mode set
- PURPOSE : Set the transmission mode.
-
- PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
-
- RESULT : Returns error code
-
- REMARKS : Assumes that SSC not used (SSC disabled, device not opened yet
- or just closed)
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val)
-{
- unsigned long tmp;
-
- // check parameters
- if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
- return -EINVAL;
- /*check BUSY and RXCNT*/
- if ( READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY
- ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)
- return -EBUSY;
- // modify
- tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
- ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
- WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON);
- info->opts.modeRxTx = val;
-/*
- printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n",
- info->port_nr,
- ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"",
- ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":"");
-*/
- return 0;
-} // ifx_ssc_rxtx_mode_set
-
-void ifx_gpio_init(void)
-{
- u32 temp;
-/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */
- temp = *(AMAZON_GPIO_P0_DIR) ;
- temp &= 0xFFFFFBFF;
- temp |= 0x3800;
- *(AMAZON_GPIO_P0_DIR) = temp;
-/* set port 0 alternate select register 0 */
- temp = *(AMAZON_GPIO_P0_ALTSEL0) ;
- temp &= 0xFFFFC3FF;
- temp |= 0x00001c00;
- *(AMAZON_GPIO_P0_ALTSEL0) = temp;
-
-/* set port 0 alternate select register 1 */
- temp = *(AMAZON_GPIO_P0_ALTSEL1) ;
- temp &= 0xFFFFC3FF;
- temp |= 0x00002000;
- *(AMAZON_GPIO_P0_ALTSEL1) = temp;
-
-/* set port 0 open drain mode register */
- temp = *(AMAZON_GPIO_P0_OD);
- temp |= 0x00003800; /* set output pin normal mode */
- *(AMAZON_GPIO_P0_OD)= temp;
-}
-
-/*
- * This routine intializes the SSC appropriately depending
- * on slave/master and full-/half-duplex mode.
- * It assumes that the SSC is disabled and the fifo's and buffers
- * are flushes later on.
- */
-static int
-ifx_ssc_sethwopts(struct ifx_ssc_port *info)
-{
- unsigned long flags, bits;
- struct ifx_ssc_hwopts *opts = &info->opts;
-
- /* sanity checks */
- if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) ||
- (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) {
- printk("%s: sanity check failed\n", __FUNCTION__);
- return -EINVAL;
- }
- bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
- bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
-// if (opts->abortErrDetect)
-// bits |= IFX_SSC_CON_ABORT_ERR_CHECK;
- if (opts->rxOvErrDetect)
- bits |= IFX_SSC_CON_RX_OFL_CHECK;
- if (opts->rxUndErrDetect)
- bits |= IFX_SSC_CON_RX_UFL_CHECK;
- if (opts->txOvErrDetect)
- bits |= IFX_SSC_CON_TX_OFL_CHECK;
- if (opts->txUndErrDetect)
- bits |= IFX_SSC_CON_TX_UFL_CHECK;
- if (opts->loopBack)
- bits |= IFX_SSC_CON_LOOPBACK_MODE;
- if (opts->echoMode)
- bits |= IFX_SSC_CON_ECHO_MODE_ON;
- if (opts->headingControl)
- bits |= IFX_SSC_CON_MSB_FIRST;
- if (opts->clockPhase)
- bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
- if (opts->clockPolarity)
- bits |= IFX_SSC_CON_CLOCK_FALL;
- switch (opts->modeRxTx) {
- case IFX_SSC_MODE_TX:
- bits |= IFX_SSC_CON_RX_OFF;
- break;
- case IFX_SSC_MODE_RX:
- bits |= IFX_SSC_CON_TX_OFF;
- break;
- } // switch (opts->modeRxT)
- local_irq_save(flags);
- WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON);
- WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
- (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS),
- info->mapbase + IFX_SSC_GPOCON);
- //master mode
- if (opts->masterSelect){
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
- }else{
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE);
- }
- // init serial framing
- WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON);
- /* set up the port pins */
- //check for general requirements to switch (external) pad/pin characteristics
- ifx_gpio_init();
- local_irq_restore(flags);
-
- return 0;
-} // ifx_ssc_sethwopts
-
-static int
-ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud)
-{
- unsigned int ifx_ssc_clock;
- unsigned int br;
- unsigned long flags;
- bool enabled;
-
- ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
- if (ifx_ssc_clock ==0)
- return -EINVAL;
-
- local_irq_save(flags);
- /* have to disable the SSC to set the baudrate */
- enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- // compute divider
- br = ((ifx_ssc_clock >> 1)/baud) - 1;
- asm("SYNC");
- if (br > 0xffff ||
- ((br == 0) &&
- ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) &
- IFX_SSC_STATE_IS_MASTER) == 0))){
- local_irq_restore(flags);
- printk("%s: illegal baudrate %u\n", __FUNCTION__, baud);
- return -EINVAL;
- }
- WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR);
- if (enabled)
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- local_irq_restore(flags);
- return 0;
-} // ifx_ssc_set_baud
-
-static int
-ifx_ssc_hwinit(struct ifx_ssc_port *info)
-{
- unsigned long flags;
- bool enabled;
-
- /* have to disable the SSC */
- enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
-
- if (ifx_ssc_sethwopts(info) < 0)
- {
- printk("%s: setting the hardware options failed\n",
- __FUNCTION__);
- return -EINVAL;
- }
-
- if (ifx_ssc_set_baud(info, info->baud) < 0) {
- printk("%s: setting the baud rate failed\n", __FUNCTION__);
- return -EINVAL;
- }
- local_irq_save(flags);
- /* TX FIFO */
- WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_TXFCON);
- /* RX FIFO */
- WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL <<
- IFX_SSC_XFCON_ITL_OFFSET) |
- IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_RXFCON);
- local_irq_restore(flags);
- if (enabled)
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE,
- info->mapbase + IFX_SSC_WHBSTATE);
- return 0;
-} // ifx_ssc_hwinit
-
-/*-----------------------------------------------------------------------------
- FUNC-NAME : ifx_ssc_batch_exec
- LONG-NAME :
- PURPOSE :
-
- PARAMETER : *info pointer to the port-specific structure ifx_ssc_port.
-
- RESULT : Returns error code
-
- REMARKS :
------------------------------------------------------------------------------*/
-static int
-ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor)
-{
- // ### TO DO: implement user space batch execution
- // first, copy the whole linked list from user to kernel space
- // save some hardware options
- // execute list
- // restore hardware options if selected
- return -EFAULT;
-} // ifx_ssc_batch_exec
-
-
-/*
- * This routine allows the driver to implement device-
- * specific ioctl's. If the ioctl number passed in cmd is
- * not recognized by the driver, it should return ENOIOCTLCMD.
- */
-int
-ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long data)
-{
- struct ifx_ssc_port *info;
- int line, ret_val = 0;
- unsigned long flags;
- unsigned long tmp;
- int from_kernel = 0;
-
- if ((inode == (struct inode *)0) || (inode == (struct inode *)1))
- {
- from_kernel = 1;
- line = (int)inode;
- }
- else
- line = MINOR(filp->f_dentry->d_inode->i_rdev);
-
- /* don't use more minor devices than we can support */
- if (line < 0 || line >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[line];
-
- switch (cmd) {
- case IFX_SSC_STATS_READ:
- /* data must be a pointer to a struct ifx_ssc_statistics */
- if (from_kernel)
- memcpy((void *)data, (void *)&info->stats,
- sizeof(struct ifx_ssc_statistics));
- else
- if (copy_to_user((void *)data,
- (void *)&info->stats,
- sizeof(struct ifx_ssc_statistics)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_STATS_RESET:
- /* just resets the statistics counters */
- memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics));
- break;
- case IFX_SSC_BAUD_SET:
- /* if the buffers are not empty then the port is */
- /* busy and we shouldn't change things on-the-fly! */
- if (!info->txbuf || !info->rxbuf ||
- (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_BUSY)) {
- ret_val = -EBUSY;
- break;
- }
- /* misuse flags */
- if (from_kernel)
- flags = *((unsigned long *)data);
- else
- if (copy_from_user((void *)&flags,
- (void *)data, sizeof(flags)))
- {
- ret_val = -EFAULT;
- break;
- }
- if (flags == 0)
- {
- ret_val = -EINVAL;
- break;
- }
- if (ifx_ssc_set_baud(info, flags) < 0)
- {
- ret_val = -EINVAL;
- break;
- }
- info->baud = flags;
- break;
- case IFX_SSC_BAUD_GET:
- if (from_kernel)
- *((unsigned int *)data) = info->baud;
- else
- if (copy_to_user((void *)data,
- (void *)&info->baud,
- sizeof(unsigned long)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_RXTX_MODE_SET:
- if (from_kernel)
- tmp = *((unsigned long *)data);
- else
- if (copy_from_user((void *)&tmp,
- (void *)data, sizeof(tmp))) {
- ret_val = -EFAULT;
- break;
- }
- ret_val = ifx_ssc_rxtx_mode_set(info, tmp);
- break;
- case IFX_SSC_RXTX_MODE_GET:
- tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) &
- (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF));
- if (from_kernel)
- *((unsigned int *)data) = tmp;
- else
- if (copy_to_user((void *)data,
- (void *)&tmp,
- sizeof(tmp)))
- ret_val = -EFAULT;
- break;
-
- case IFX_SSC_ABORT:
- ifx_ssc_abort(info);
- break;
-
- case IFX_SSC_GPO_OUT_SET:
- if (from_kernel)
- tmp = *((unsigned long *)data);
- else
- if (copy_from_user((void *)&tmp,
- (void *)data, sizeof(tmp))) {
- ret_val = -EFAULT;
- break;
- }
- if (tmp > IFX_SSC_MAX_GPO_OUT)
- ret_val = -EINVAL;
- else
- WRITE_PERIPHERAL_REGISTER
- (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS),
- info->mapbase + IFX_SSC_WHBGPOSTAT);
- break;
- case IFX_SSC_GPO_OUT_CLR:
- if (from_kernel)
- tmp = *((unsigned long *)data);
- else
- if (copy_from_user((void *)&tmp,
- (void *)data, sizeof(tmp))) {
- ret_val = -EFAULT;
- break;
- }
- if (tmp > IFX_SSC_MAX_GPO_OUT)
- ret_val = -EINVAL;
- else {
- WRITE_PERIPHERAL_REGISTER
- (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS),
- info->mapbase + IFX_SSC_WHBGPOSTAT);
- }
- break;
- case IFX_SSC_GPO_OUT_GET:
- tmp = READ_PERIPHERAL_REGISTER
- (info->mapbase + IFX_SSC_GPOSTAT);
- if (from_kernel)
- *((unsigned int *)data) = tmp;
- else
- if (copy_to_user((void *)data,
- (void *)&tmp,
- sizeof(tmp)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_STATUS_GET:
- ifx_ssc_frm_status_get(info);
- if (from_kernel)
- memcpy((void *)data, (void *)&info->frm_status,
- sizeof(struct ifx_ssc_frm_status));
- else
- if (copy_to_user((void *)data,
- (void *)&info->frm_status,
- sizeof(struct ifx_ssc_frm_status)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_CONTROL_GET:
- ifx_ssc_frm_control_get(info);
- if (from_kernel)
- memcpy((void *)data, (void *)&info->frm_opts,
- sizeof(struct ifx_ssc_frm_opts));
- else
- if (copy_to_user((void *)data,
- (void *)&info->frm_opts,
- sizeof(struct ifx_ssc_frm_opts)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_CONTROL_SET:
- if (from_kernel)
- memcpy((void *)&info->frm_opts, (void *)data,
- sizeof(struct ifx_ssc_frm_opts));
- else
- if (copy_to_user((void *)&info->frm_opts,
- (void *)data,
- sizeof(struct ifx_ssc_frm_opts))){
- ret_val = -EFAULT;
- break;
- }
- ret_val = ifx_ssc_frm_control_set(info);
- break;
- case IFX_SSC_HWOPTS_SET:
- /* data must be a pointer to a struct ifx_ssc_hwopts */
- /* if the buffers are not empty then the port is */
- /* busy and we shouldn't change things on-the-fly! */
- if (!info->txbuf || !info->rxbuf ||
- (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_BUSY)) {
- ret_val = -EBUSY;
- break;
- }
- if (from_kernel)
- memcpy((void *)&info->opts, (void *)data,
- sizeof(struct ifx_ssc_hwopts));
- else
- if (copy_from_user((void *)&info->opts,
- (void *)data,
- sizeof(struct ifx_ssc_hwopts)))
- {
- ret_val = -EFAULT;
- break;
- }
- if (ifx_ssc_hwinit(info) < 0)
- {
- ret_val = -EIO;
- }
- break;
- case IFX_SSC_HWOPTS_GET:
- /* data must be a pointer to a struct ifx_ssc_hwopts */
- if (from_kernel)
- memcpy((void *)data, (void *)&info->opts,
- sizeof(struct ifx_ssc_hwopts));
- else
- if (copy_to_user((void *)data,
- (void *)&info->opts,
- sizeof(struct ifx_ssc_hwopts)))
- ret_val = -EFAULT;
- break;
- default:
- ret_val = -ENOIOCTLCMD;
- }
-
- return ret_val;
-} /* ifx_ssc_ioctl */
-EXPORT_SYMBOL(ifx_ssc_ioctl);
-
-///* the poll routine */
-//static unsigned int
-//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts)
-//{
-// int unit = MINOR(filp->f_dentry->d_inode->i_rdev);
-// struct ifx_ssc_port *info;
-// unsigned int mask = 0;
-// int spc;
-//
-// info = &isp[unit];
-//
-// /* add event to the wait queues */
-// /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */
-// poll_wait(filp, &info->pwait, pts);
-//
-// /* are there bytes in the RX SW-FIFO? */
-// if (info->rxrp != info->rxwp)
-// mask |= POLLIN | POLLRDNORM;
-//
-// /* free space in the TX SW-FIFO */
-// spc = info->txrp - info->txwp - 1;
-// if (spc < 0)
-// spc += TX_BUFSIZE;
-//#ifdef IFX_SSC_USEDMA
-// /* writing always works, except in the DMA case when all descriptors */
-// /* are used up */
-// if (unit == 1 && info->dma_freecnt == 0)
-// spc = 0;
-//#endif
-// if (spc > 0)
-// mask |= POLLOUT | POLLWRNORM;
-//
-// return (mask);
-//}
-
-static int
-ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data)
-{
- int off = 0;
- unsigned long flags;
-
- /* don't want any interrupts here */
- save_flags(flags);
- cli();
-
-
- /* print statistics */
- off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n");
- off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr);
- off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr);
- off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr);
- off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr);
- off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr);
- off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr);
- off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes);
- off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes);
-
- restore_flags (flags); /* XXXXX */
- *eof = 1;
- return (off);
-}
-
-
-/*
- * This routine prints out the appropriate serial driver version number
- */
-static inline void
-show_version(void)
-{
-#if 0
- printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n"
- " version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__);
-#endif
-} /* show_version */
-
-
-/*
- * Due to the fact that a port can be dynamically switched between slave
- * and master mode using an IOCTL the hardware is not initialized here,
- * but in ifx_ssc_hwinit() as a result of an IOCTL.
- */
-int __init
-ifx_ssc_init(void)
-{
- struct ifx_ssc_port *info;
- int i, nbytes;
- unsigned long flags;
- int ret_val;
-
- // ### TO DO: dynamic port count evaluation due to pin multiplexing
-
- ret_val = -ENOMEM;
- nbytes = PORT_CNT * sizeof(struct ifx_ssc_port);
- isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL);
- if (isp == NULL)
- {
- printk("%s: no memory for isp\n", __FUNCTION__);
- return (ret_val);
- }
- memset(isp, 0, nbytes);
-
- show_version();
-
- /* register the device */
- ret_val = -ENXIO;
-/*
- i = maj;
-*/
- if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
- {
- printk("Unable to register major %d for the Infineon SSC\n", maj);
- if (maj == 0){
- goto errout;
- }
- else{
- maj = 0;
- if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0)
- {
- printk("Unable to register major %d for the Infineon SSC\n", maj);
- goto errout;
- }
- }
- }
- if (maj == 0) maj = i;
- //printk("registered major %d for Infineon SSC\n", maj);
-
- /* set default values in ifx_ssc_port */
- for (i = 0; i < PORT_CNT; i++) {
- info = &isp[i];
- info->port_nr = i;
- /* default values for the HwOpts */
- info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT;
- info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT;
- info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT;
- info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT;
- info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT;
- info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK;
- info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE;
- info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA;
- info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY;
- info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE;
- info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL;
- info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH;
- info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX;
- info->opts.gpoCs = IFX_SSC_DEF_GPO_CS;
- info->opts.gpoInv = IFX_SSC_DEF_GPO_INV;
- info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE;
- info->baud = IFX_SSC_DEF_BAUDRATE;
- info->rxbuf = NULL;
- info->txbuf = NULL;
- /* values specific to SSC1 */
- if (i == 0) {
- info->mapbase = AMAZON_SSC_BASE_ADD_0;
- // ### TO DO: power management
-
- // setting interrupt vectors
- info->txirq = IFX_SSC_TIR;
- info->rxirq = IFX_SSC_RIR;
- info->errirq = IFX_SSC_EIR;
-/*
- info->frmirq = IFX_SSC_FIR;
-*/
- }
- /* activate SSC */
- /* CLC.DISS = 0 */
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC);
-
-// ### TO DO: multiple instances
-
- init_waitqueue_head(&info->rwait);
- //init_waitqueue_head(&info->pwait);
-
- local_irq_save(flags);
-
- // init serial framing register
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON);
-
- /* try to get the interrupts */
- // ### TO DO: interrupt handling with multiple instances
- ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int,
- 0, "ifx_ssc_tx", info);
- if (ret_val){
- printk("%s: unable to get irq %d\n", __FUNCTION__,
- info->txirq);
- local_irq_restore(flags);
- goto errout;
- }
- ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int,
- 0, "ifx_ssc_rx", info);
- if (ret_val){
- printk("%s: unable to get irq %d\n", __FUNCTION__,
- info->rxirq);
- local_irq_restore(flags);
- goto irqerr;
- }
- ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int,
- 0, "ifx_ssc_err", info);
- if (ret_val){
- printk("%s: unable to get irq %d\n", __FUNCTION__,
- info->errirq);
- local_irq_restore(flags);
- goto irqerr;
- }
-/*
- ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int,
- 0, "ifx_ssc_frm", info);
- if (ret_val){
- printk("%s: unable to get irq %d\n", __FUNCTION__,
- info->frmirq);
- local_irq_restore(flags);
- goto irqerr;
- }
-
-*/
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN);
-
- local_irq_restore(flags);
- } // for (i = 0; i < PORT_CNT; i++)
-
- /* init the SSCs with default values */
- for (i = 0; i < PORT_CNT; i++)
- {
- info = &isp[i];
- if (ifx_ssc_hwinit(info) < 0)
- {
- printk("%s: hardware init failed for port %d\n",
- __FUNCTION__, i);
- goto irqerr;
- }
- }
-
- /* register /proc read handler */
- // ### TO DO: multiple instances
- /* for SSC1, which is always present */
- create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL);
- return 0;
-
-irqerr:
- // ### TO DO: multiple instances
- ifx_int_wrapper.free(isp[0].txirq,&isp[0]);
- ifx_int_wrapper.free(isp[0].rxirq,&isp[0]);
- ifx_int_wrapper.free(isp[0].errirq,&isp[0]);
-/*
- ifx_int_wrapper.free(isp[0].frmirq, &isp[0]);
-*/
-errout:
- /* free up any allocated memory in the error case */
- kfree(isp);
- return (ret_val);
-} /* ifx_ssc_init */
-
-
-void
-ifx_ssc_cleanup_module(void)
-{
- int i;
-
- /* free up any allocated memory */
- for (i = 0; i < PORT_CNT; i++)
- {
- /* disable the SSC */
- WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE);
- /* free the interrupts */
- ifx_int_wrapper.free(isp[i].txirq, &isp[i]);
- ifx_int_wrapper.free(isp[i].rxirq, &isp[i]);
- ifx_int_wrapper.free(isp[i].errirq, &isp[i]);
-/*
- ifx_int_wrapper.free(isp[i].frmirq, &isp[i]);
-
- if (isp[i].rxbuf != NULL)
- kfree(isp[i].rxbuf);
- if (isp[i].txbuf != NULL)
- kfree(isp[i].txbuf);
-*/
- }
- kfree(isp);
- /* unregister the device */
- if (unregister_chrdev(maj, "ssc"))
- {
- printk("Unable to unregister major %d for the SSC\n", maj);
- }
- /* delete /proc read handler */
- remove_proc_entry("driver/ssc1", NULL);
- remove_proc_entry("driver/ssc2", NULL);
-} /* ifx_ssc_cleanup_module */
-
-module_exit(ifx_ssc_cleanup_module);
-
-/* Module entry-points */
-module_init(ifx_ssc_init);
-
-#ifndef MODULE
-static int __init
-ifx_ssc_set_maj(char *str)
-{
- maj = simple_strtol(str, NULL, 0);
- return 1;
-}
-__setup("ssc_maj=", ifx_ssc_set_maj);
-#endif /* !MODULE */
-
-#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg)
-/* Brief: chip select enable
- */
-inline int amazon_ssc_cs_low(u32 pin)
-{
- int ret=0;
- if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){
- AMAZON_SSC_EMSG("clear CS %d fails\n",pin);
- }
- wmb();
- return ret;
-}
-EXPORT_SYMBOL(amazon_ssc_cs_low);
-/* Brief: chip select disable
- */
-inline int amazon_ssc_cs_high(u32 pin)
-{
- int ret=0;
- if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){
- AMAZON_SSC_EMSG("set CS %d fails\n", pin);
- }
- wmb();
- return ret;
-}
-EXPORT_SYMBOL(amazon_ssc_cs_high);
-/* Brief: one SSC session
- * Parameter:
- * tx_buf
- * tx_len
- * rx_buf
- * rx_len
- * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX
- * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted
- * <0 error code
- * Description:
- * 0. copy data to internal buffer
- * 1. Write command
- * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data
- * 2b. If not Read back (tx_len + rx_len) data
- * 3. copy internal buffer to rx buf if necessary
- */
-static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
-{
- int ret=0;
-
- char * ssc_tx_buf=NULL;
- char * ssc_rx_buf=NULL;
-
-// volatile char ssc_tx_buf[128]={0};
-// volatile char ssc_rx_buf[128]={0};
-
- int eff_size=0;
- u8 mode=0;
-
- if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){
- AMAZON_SSC_EMSG("invalid parameters\n");
- ret=-EINVAL;
- goto ssc_session_exit;
- }else if (tx_buf == NULL || tx_len == 0){
- if (rx_buf != NULL && rx_len != 0){
- mode = IFX_SSC_MODE_RX;
- }else{
- AMAZON_SSC_EMSG("invalid parameters\n");
- ret=-EINVAL;
- goto ssc_session_exit;
- }
- }else if (rx_buf == NULL || rx_len ==0){
- if (tx_buf != NULL && tx_len != 0){
- mode = IFX_SSC_MODE_TX;
- }else{
- AMAZON_SSC_EMSG("invalid parameters\n");
- ret=-EINVAL;
- goto ssc_session_exit;
- }
- }else{
- mode = IFX_SSC_MODE_RXTX;
- }
-
- if (mode == IFX_SSC_MODE_RXTX){
- eff_size = tx_len + rx_len;
- }else if (mode == IFX_SSC_MODE_RX){
- eff_size = rx_len;
- }else{
- eff_size = tx_len;
- }
-
- //4 bytes alignment, required by driver
- /* change by TaiCheng */
- //if (in_irq()){
- if (1){
- ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC);
- ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC);
- }else{
- ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL);
- ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL);
- }
- if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){
- AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size);
- ret = -ENOMEM;
- goto ssc_session_exit;
- }
- memset((void*)ssc_tx_buf, 0, eff_size);
- memset((void*)ssc_rx_buf, 0, eff_size);
-
- if (tx_len>0){
- memcpy(ssc_tx_buf, tx_buf, tx_len);
- }
-
- ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size);
-
- if (ret > 0) {
- ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite
- }
-
- if ( ret != eff_size ){
- AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret);
- goto ssc_session_exit;
- }
- ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size);
- if ( ret != eff_size ){
- AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret);
- goto ssc_session_exit;
- }
-
- memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len);
-
- if (mode == IFX_SSC_MODE_TX) {
- ret = tx_len;
- }else{
- ret = rx_len;
- }
-ssc_session_exit:
-
- if (ssc_tx_buf != NULL) kfree(ssc_tx_buf);
- if (ssc_rx_buf != NULL) kfree(ssc_rx_buf);
-
- if (ret<0) {
- printk("ssc session fails\n");
- }
- return ret;
-}
-/* Brief: TX-RX session
- * Parameter:
- * tx_buf
- * tx_len
- * rx_buf
- * rx_len
- * Return: >=0 number of bytes received
- * <0 error code
- * Description:
- * 1. TX session
- * 2. RX session
- */
-int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len)
-{
- return ssc_session(tx_buf,tx_len,rx_buf,rx_len);
-}
-EXPORT_SYMBOL(amazon_ssc_txrx);
-/* Brief: TX only session
- * Parameter:
- * tx_buf
- * tx_len
- * Return: >=0 number of bytes transmitted
- * <0 error code
- */
-int amazon_ssc_tx(char * tx_buf, u32 tx_len)
-{
- return ssc_session(tx_buf,tx_len,NULL,0);
-}
-EXPORT_SYMBOL(amazon_ssc_tx);
-/* Brief: RX only session
- * Parameter:
- * rx_buf
- * rx_len
- * Return: >=0 number of bytes received
- * <0 error code
- */
-int amazon_ssc_rx(char * rx_buf, u32 rx_len)
-{
- return ssc_session(NULL,0,rx_buf,rx_len);
-}
-EXPORT_SYMBOL(amazon_ssc_rx);
-
diff --git a/target/linux/amazon/files/drivers/mtd/maps/amazon.c b/target/linux/amazon/files/drivers/mtd/maps/amazon.c
deleted file mode 100644
index 568f7d828d..0000000000
--- a/target/linux/amazon/files/drivers/mtd/maps/amazon.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Handle mapping of the flash memory access routines
- * on Amazon based devices.
- *
- * Copyright(C) 2004 peng.liu@infineon.com
- *
- * This code is GPLed
- *
- */
-// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled
-// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB
-// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition
-// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size
-// 165001:henryhsu 2005/9/7 Rolback to support INtel flash
-// 509071:tc.chen 2005/09/07 Reduced flash writing time
-// 511046:linmars 2005/11/04 change bootloader size from 128 into 64
-// 511241:linmars 2005/11/24 merge TaiChen's IRM patch
-
-// copyright 2005 infineon
-
-// copyright 2007 john crispin <blogic@openwrt.org>
-// copyright 2007 felix fietkau <nbd@openwrt.org>
-// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/cfi.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <asm/amazon/amazon.h>
-
-#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c
-#define AMAZON_MTD_REG32( addr ) (*(volatile u32 *)(addr))
-
-
-static struct map_info amazon_map = {
- .name = "AMAZON_FLASH",
- .bankwidth = 2,
-};
-
-static map_word amazon_read16(struct map_info * map, unsigned long ofs)
-{
- map_word temp;
- ofs ^= 2;
- temp.x[0] = *((__u16 *) (map->virt + ofs));
- return temp;
-}
-
-static void amazon_write16(struct map_info *map, map_word d, unsigned long adr)
-{
- adr ^= 2;
- *((__u16 *) (map->virt + adr)) = d.x[0];
-}
-
-void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- u8 *p;
- u8 *to_8;
- from = (unsigned long) (from + map->virt);
- p = (u8 *) from;
- to_8 = (u8 *) to;
- while(len--){
- *to_8++ = *p++;
- }
-}
-
-void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
- u8 *p = (u8*) from;
- u8 *to_8;
- to += (unsigned long) map->virt;
- to_8 = (u8*)to;
- while(len--){
- *p++ = *to_8++;
- }
-}
-
-#define UBOOT_SIZE 0x40000
-
-static struct mtd_partition amazon_partitions[3] = {
- {
- name:"U-Boot", /* U-Boot firmware */
- offset:0x00000000,
- size:UBOOT_SIZE , /* 128k */
- },
- {
- name:"kernel", /* firmware */
- offset:UBOOT_SIZE,
- size:0x00100000, /* 192K */
- },
- {
- name:"rootfs", /* default partition */
- offset:0x00200000,
- size:0x00200000,
- },
-};
-
-unsigned long uImage_size = 0x10000d;
-
-int find_uImage_size(unsigned long start_offset)
-{
- unsigned long magic;
- unsigned long temp;
- amazon_copy_from(&amazon_map, &magic, start_offset, 4);
- if (!(ntohl(magic) == 0x27051956)) {
- printk(KERN_INFO "amazon_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset);
- return 0;
- }
- amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4);
- printk(KERN_INFO "amazon_mtd: kernel size is %ld \n", temp + 0x40);
- return temp + 0x40;
-}
-
-static int amazon_mtd_probe(struct platform_device *dev)
-{
- unsigned long uimage_size;
- struct mtd_info *mymtd = NULL;
- struct mtd_partition *parts = NULL;
-
- *AMAZON_EBU_BUSCON0 = 0x1d7ff;
-
- amazon_map.read = amazon_read16;
- amazon_map.write = amazon_write16;
- amazon_map.copy_from = amazon_copy_from;
- amazon_map.copy_to = amazon_copy_to;
-
- amazon_map.phys = dev->resource->start;
- amazon_map.size = dev->resource->end - amazon_map.phys + 1;
- amazon_map.virt = ioremap_nocache(amazon_map.phys, amazon_map.size);
-
- if (!amazon_map.virt) {
- printk(KERN_WARNING "amazon_mtd: Failed to ioremap!\n");
- return -EIO;
- }
-
- mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map);
- if (!mymtd) {
- iounmap(amazon_map.virt);
- printk(KERN_WARNING "amazon_mtd: probing failed\n");
- return -ENXIO;
- }
-
- mymtd->owner = THIS_MODULE;
- parts = &amazon_partitions[0];
-
- /* Some Samsung devices are containing a 16 MB flash chip with a bigger U-Boot partition. */
- if(mymtd->size == 0x01000000 && mymtd->erasesize == 0x00020000) {
- printk(KERN_INFO "amazon_mtd: Found big flash chip!\n");
- amazon_partitions[0].size = 0x60000;
- amazon_partitions[1].offset = 0x60000;
- uimage_size = find_uImage_size(amazon_partitions[1].offset);
- amazon_partitions[1].size = uimage_size;
- amazon_partitions[2].offset = 0x60000 + uimage_size;
- amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - mymtd->erasesize;
- } else {
- printk(KERN_INFO "amazon_mtd: Found small flash chip!\n");
- uimage_size = find_uImage_size(amazon_partitions[1].offset);
- amazon_partitions[1].size = uimage_size;
- amazon_partitions[2].offset = UBOOT_SIZE + uimage_size;
- amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize);
- }
-
- mtd_device_register(mymtd, parts, 3);
-
- printk(KERN_INFO "amazon_mtd: added %s flash with %dMB\n",
- amazon_map.name, ((int)mymtd->size) >> 20);
- return 0;
-}
-
-static struct platform_driver amazon_mtd_driver = {
- .probe = amazon_mtd_probe,
- .driver = {
- .name = "amazon_mtd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_mtd_init(void)
-{
- int ret = platform_driver_register(&amazon_mtd_driver);
- if (ret)
- printk(KERN_WARNING "amazon_mtd: error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_mtd_cleanup(void)
-{
- platform_driver_unregister(&amazon_mtd_driver);
-}
-
-module_init(amazon_mtd_init);
-module_exit(amazon_mtd_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("john crispin blogic@openwrt.org");
-MODULE_DESCRIPTION("MTD map driver for AMAZON boards");
-
diff --git a/target/linux/amazon/files/drivers/net/ethernet/admmod.c b/target/linux/amazon/files/drivers/net/ethernet/admmod.c
deleted file mode 100644
index a11ee1d393..0000000000
--- a/target/linux/amazon/files/drivers/net/ethernet/admmod.c
+++ /dev/null
@@ -1,1493 +0,0 @@
-/******************************************************************************
- Copyright (c) 2004, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
- ******************************************************************************
- Module : admmod.c
- Date : 2004-09-01
- Description : JoeLin
- Remarks:
-
- Revision:
- MarsLin, add to support VLAN
-
- *****************************************************************************/
-//000001.joelin 2005/06/02 add"ADM6996_MDC_MDIO_MODE" define,
-// if define ADM6996_MDC_MDIO_MODE==> ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode,
-// amazon should contrl ADM6996 by MDC/MDIO pin
-// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode,
-// amazon should contrl ADM6996 by GPIO15,16,17,18 pin
-/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */
-/* 509201:linmars remove driver testing codes */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <asm/atomic.h>
-#include <asm-mips/amazon/amazon.h>
-#include <asm-mips/amazon/adm6996.h>
-//#include <linux/amazon/adm6996.h>
-
-
-unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \
- {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \
- ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF};
-unsigned int ifx_sw_bits[8] = \
- {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff};
-unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8};
-//050613:fchang
-/* 507281:linmars start */
-#ifdef CONFIG_SWITCH_ADM6996_MDIO
-#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin
-#else
-#undef ADM6996_MDC_MDIO_MODE
-#endif
-/* 507281:linmars end */
-#define adm6996i 0
-#define adm6996lc 1
-#define adm6996l 2
-unsigned int adm6996_mode=adm6996i;
-/*
- initialize GPIO pins.
- output mode, low
-*/
-void ifx_gpio_init(void)
-{
- //GPIO16,17,18 direction:output
- //GPIO16,17,18 output 0
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-
-}
-
-/* read one bit from mdio port */
-int ifx_sw_mdio_readbit(void)
-{
- //int val;
-
- //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8;
- //return val;
- //GPIO16
- return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1;
-}
-
-/*
- MDIO mode selection
- 1 -> output
- 0 -> input
-
- switch input/output mode of GPIO 0
-*/
-void ifx_mdio_mode(int mode)
-{
-// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS :
-// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN);
- mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO):
- (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO);
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR);
- mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO);
- AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/
-}
-
-void ifx_mdc_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDC);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDC;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC;
-}
-
-void ifx_mdio_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDIO);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDIO;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO;
-}
-
-void ifx_mdcs_hi(void)
-{
- //GPIO_SET_HI(GPIO_MDCS);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r|=GPIO_MDCS;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS;
-}
-
-void ifx_mdc_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDC);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDC;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC);
-}
-
-void ifx_mdio_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDIO);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDIO;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO);
-}
-
-void ifx_mdcs_lo(void)
-{
- //GPIO_SET_LOW(GPIO_MDCS);
- //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS;
- /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT);
- r&=~GPIO_MDCS;
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS);
-}
-
-/*
- mdc pulse
- 0 -> 1 -> 0
-*/
-static void ifx_sw_mdc_pulse(void)
-{
- ifx_mdc_lo();
- udelay(ADM_SW_MDC_DOWN_DELAY);
- ifx_mdc_hi();
- udelay(ADM_SW_MDC_UP_DELAY);
- ifx_mdc_lo();
-}
-
-/*
- mdc toggle
- 1 -> 0
-*/
-static void ifx_sw_mdc_toggle(void)
-{
- ifx_mdc_hi();
- udelay(ADM_SW_MDC_UP_DELAY);
- ifx_mdc_lo();
- udelay(ADM_SW_MDC_DOWN_DELAY);
-}
-
-/*
- enable eeprom write
- For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers
-*/
-static void ifx_sw_eeprom_write_enable(void)
-{
- unsigned int op;
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_hi();
- udelay(ADM_SW_CS_DELAY);
- /* enable chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
-
- /* eeprom write enable */
- op = ADM_SW_BIT_MASK_4;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE_ENABLE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
- while (op)
- {
- ifx_mdio_lo();
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
- /* disable chip select */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_pulse();
-}
-
-/*
- disable eeprom write
-*/
-static void ifx_sw_eeprom_write_disable(void)
-{
- unsigned int op;
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_hi();
- udelay(ADM_SW_CS_DELAY);
- /* enable chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
- /* eeprom write disable */
- op = ADM_SW_BIT_MASK_4;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE_DISABLE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3);
- while (op)
- {
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
- /* disable chip select */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_pulse();
-}
-
-/*
- read registers from ADM6996
- serial registers start at 0x200 (addr bit 9 = 1b)
- EEPROM registers -> 16bits; Serial registers -> 32bits
-*/
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin
-static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat)
-{
- addr=(addr<<16)&0x3ff0000;
- AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr);
- while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
- *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF);
- return 0;
-}
-#endif
-
-static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* read command (10b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_READ)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to input mode */
- ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
- /* start read data */
- *dat = 0;
-//adm6996i op = ADM_SW_BIT_MASK_32;
- op = ADM_SW_BIT_MASK_16;//adm6996i
- while (op)
- {
- *dat <<= 1;
- if (ifx_sw_mdio_readbit()) *dat |= 1;
- ifx_sw_mdc_toggle();
-
- op >>= 1;
- }
-
- /* set MDIO to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
-//adm6996i if (!(addr & 0x200))
-//adm6996i {
-//adm6996i if (addr % 2)
-//adm6996i *dat >>= 16;
-//adm6996i else
-//adm6996i *dat &= 0xffff;
-//adm6996i }
-
- return 0;
-}
-//adm6996
-static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* read command (10b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_READ)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to input mode */
- ifx_mdio_mode(ADM_SW_MDIO_INPUT);
-
- /* start read data */
- *dat = 0;
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- *dat <<= 1;
- if (ifx_sw_mdio_readbit()) *dat |= 1;
- ifx_sw_mdc_toggle();
-
- op >>= 1;
- }
-
- /* set MDIO to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
- if (!(addr & 0x200))
- {
- if (addr % 2)
- *dat >>= 16;
- else
- *dat &= 0xffff;
- }
-
- return 0;
-}
-
-static int ifx_sw_read(unsigned int addr, unsigned int *dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
- ifx_sw_read_adm6996i_smi(addr,dat);
-#else
- if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat);
- else ifx_sw_read_adm6996l(addr,dat);
-#endif
- return 0;
-
-}
-
-/*
- write register to ADM6996 eeprom registers
-*/
-//for adm6996i -start
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat)
-{
-
- AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000;
- while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){};
-
- return 0;
-
-}
-#endif //ADM6996_MDC_MDIO_MODE //000001.joelin
-
-static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- ifx_mdcs_lo();
- ifx_mdc_lo();
- ifx_mdio_lo();
-
- udelay(ADM_SW_CS_DELAY);
-
- /* preamble, 32 bit 1 */
- ifx_mdio_hi();
- op = ADM_SW_BIT_MASK_32;
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* command start (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_START)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* write command (01b) */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_SMI_WRITE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A9 ~ A0 */
- op = ADM_SW_BIT_MASK_10;
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* turnaround bits */
- op = ADM_SW_BIT_MASK_2;
- ifx_mdio_hi();
- while (op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- udelay(ADM_SW_MDC_DOWN_DELAY);
-
- /* set MDIO pin to output mode */
- ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
-
- /* start write data */
- op = ADM_SW_BIT_MASK_16;
- while (op)
- {
- if (op & dat)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- // /* set MDIO to output mode */
- // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT);
-
- /* dummy clock */
- op = ADM_SW_BIT_MASK_4;
- ifx_mdio_lo();
- while(op)
- {
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- ifx_mdc_lo();
- ifx_mdio_lo();
- ifx_mdcs_hi();
-
- /* EEPROM registers */
-//adm6996i if (!(addr & 0x200))
-//adm6996i {
-//adm6996i if (addr % 2)
-//adm6996i *dat >>= 16;
-//adm6996i else
-//adm6996i *dat &= 0xffff;
-//adm6996i }
-
- return 0;
-}
-//for adm6996i-end
-static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat)
-{
- unsigned int op;
-
- ifx_gpio_init();
-
- /* enable write */
- ifx_sw_eeprom_write_enable();
-
- /* chip select */
- ifx_mdcs_hi();
- udelay(ADM_SW_CS_DELAY);
-
- /* issue write command */
- /* start bit */
- ifx_mdio_hi();
- ifx_sw_mdc_pulse();
-
- /* EEPROM write command */
- op = ADM_SW_BIT_MASK_2;
- while (op)
- {
- if (op & ADM_SW_EEPROM_WRITE)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_pulse();
- op >>= 1;
- }
-
- /* send address A7 ~ A0 */
- op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1);
-
- while (op)
- {
- if (op & addr)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- /* start write data */
- op = ADM_SW_BIT_MASK_16;
- while (op)
- {
- if (op & dat)
- ifx_mdio_hi();
- else
- ifx_mdio_lo();
-
- ifx_sw_mdc_toggle();
- op >>= 1;
- }
-
- /* disable cs & wait 1 clock */
- ifx_mdcs_lo();
- udelay(ADM_SW_CS_DELAY);
- ifx_sw_mdc_toggle();
-
- ifx_sw_eeprom_write_disable();
-
- return 0;
-}
-
-static int ifx_sw_write(unsigned int addr, unsigned int dat)
-{
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin
- ifx_sw_write_adm6996i_smi(addr,dat);
-#else //000001.joelin
- if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat);
- else ifx_sw_write_adm6996l(addr,dat);
-#endif //000001.joelin
- return 0;
-}
-
-/*
- do switch PHY reset
-*/
-int ifx_sw_reset(void)
-{
- /* reset PHY */
- ifx_sw_write(ADM_SW_PHY_RESET, 0);
-
- return 0;
-}
-
-/* 509201:linmars start */
-#if 0
-/*
- check port status
-*/
-int ifx_check_port_status(int port)
-{
- unsigned int val;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM))
- {
- ifx_printf(("error on port number (%d)!!\n", port));
- return -1;
- }
-
- ifx_sw_read(ifx_sw_conf[port], &val);
- if (ifx_sw_conf[port]%2) val >>= 16;
- /* only 16bits are effective */
- val &= 0xFFFF;
-
- ifx_printf(("Port %d status (%.8x): \n", port, val));
-
- if (val & ADM_SW_PORT_FLOWCTL)
- ifx_printf(("\t802.3x flow control supported!\n"));
- else
- ifx_printf(("\t802.3x flow control not supported!\n"));
-
- if (val & ADM_SW_PORT_AN)
- ifx_printf(("\tAuto negotiation ON!\n"));
- else
- ifx_printf(("\tAuto negotiation OFF!\n"));
-
- if (val & ADM_SW_PORT_100M)
- ifx_printf(("\tLink at 100M!\n"));
- else
- ifx_printf(("\tLink at 10M!\n"));
-
- if (val & ADM_SW_PORT_FULL)
- ifx_printf(("\tFull duplex!\n"));
- else
- ifx_printf(("\tHalf duplex!\n"));
-
- if (val & ADM_SW_PORT_DISABLE)
- ifx_printf(("\tPort disabled!\n"));
- else
- ifx_printf(("\tPort enabled!\n"));
-
- if (val & ADM_SW_PORT_TOS)
- ifx_printf(("\tTOS enabled!\n"));
- else
- ifx_printf(("\tTOS disabled!\n"));
-
- if (val & ADM_SW_PORT_PPRI)
- ifx_printf(("\tPort priority first!\n"));
- else
- ifx_printf(("\tVLAN or TOS priority first!\n"));
-
- if (val & ADM_SW_PORT_MDIX)
- ifx_printf(("\tAuto MDIX!\n"));
- else
- ifx_printf(("\tNo auto MDIX\n"));
-
- ifx_printf(("\tPVID: %d\n", \
- ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS])));
-
- return 0;
-}
-/*
- initialize a VLAN
- clear all VLAN bits
-*/
-int ifx_sw_vlan_init(int vlanid)
-{
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0);
-
- return 0;
-}
-
-/*
- add a port to certain vlan
-*/
-int ifx_sw_vlan_add(int port, int vlanid)
-{
- int reg = 0;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) ||
- (vlanid > ADM_SW_MAX_VLAN_NUM))
- {
- ifx_printf(("Port number or VLAN number ERROR!!\n"));
- return -1;
- }
- ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
- reg |= (1 << ifx_sw_vlan_port[port]);
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
- return 0;
-}
-
-/*
- delete a given port from certain vlan
-*/
-int ifx_sw_vlan_del(int port, int vlanid)
-{
- unsigned int reg = 0;
-
- if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM))
- {
- ifx_printf(("Port number or VLAN number ERROR!!\n"));
- return -1;
- }
- ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, &reg);
- reg &= ~(1 << ifx_sw_vlan_port[port]);
- ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg);
-
- return 0;
-}
-
-/*
- default VLAN setting
-
- port 0~3 as untag port and PVID = 1
- VLAN1: port 0~3 and port 5 (MII)
-*/
-static int ifx_sw_init(void)
-{
- ifx_printf(("Setting default ADM6996 registers... \n"));
-
- /* MAC clone, 802.1q based VLAN */
- ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30);
- /* auto MDIX, PVID=1, untag */
- ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f);
- ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f);
- /* auto MDIX, PVID=2, untag */
- ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f);
- /* port 0~3 & 5 as VLAN1 */
- ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155);
-
- return 0;
-}
-#endif
-/* 509201:linmars end */
-
-int adm_open(struct inode *node, struct file *filp)
-{
- return 0;
-}
-
-ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos)
-{
- return count;
-}
-
-ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos)
-{
- return count;
-}
-
-/* close */
-int adm_release(struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-/* IOCTL function */
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long adm_ioctl(struct file *filp, unsigned int cmd, unsigned long args)
-#else
-static int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args)
-#endif
-{
- PREGRW uREGRW;
- unsigned int rtval;
- unsigned int val; //6996i
- unsigned int control[6] ; //6996i
- unsigned int status[6] ; //6996i
-
- PMACENTRY mMACENTRY;//adm6996i
- PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i
-
- if (_IOC_TYPE(cmd) != ADM_MAGIC)
- {
- printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC);
- return (-EINVAL);
- }
-
- if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY)
- {
- printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd));
- return (-EINVAL);
- }
-
- switch (cmd)
- {
- case ADM_IOCTL_REGRW:
- {
- uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
- rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
- if (rtval != 0)
- {
- printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- switch(uREGRW->mode)
- {
- case REG_READ:
- uREGRW->value = 0x12345678;//inl(uREGRW->addr);
- copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
- break;
- case REG_WRITE:
- //outl(uREGRW->value, uREGRW->addr);
- break;
-
- default:
- printk("No such Register Read/Write function!! \n");
- return (-EFAULT);
- }
- kfree(uREGRW);
- break;
- }
-
- case ADM_SW_IOCTL_REGRW:
- {
- unsigned int val = 0xff;
-
- uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL);
- rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW));
- if (rtval != 0)
- {
- printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- switch(uREGRW->mode)
- {
- case REG_READ:
- ifx_sw_read(uREGRW->addr, &val);
- uREGRW->value = val;
- copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW));
- break;
-
- case REG_WRITE:
- ifx_sw_write(uREGRW->addr, uREGRW->value);
- break;
- default:
- printk("No such Register Read/Write function!! \n");
- return (-EFAULT);
- }
- kfree(uREGRW);
- break;
- }
-/* 509201:linmars start */
-#if 0
- case ADM_SW_IOCTL_PORTSTS:
- for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++)
- ifx_check_port_status(rtval);
- break;
- case ADM_SW_IOCTL_INIT:
- ifx_sw_init();
- break;
-#endif
-/* 509201:linmars end */
-//adm6996i
- case ADM_SW_IOCTL_MACENTRY_ADD:
- case ADM_SW_IOCTL_MACENTRY_DEL:
- case ADM_SW_IOCTL_MACENTRY_GET_INIT:
- case ADM_SW_IOCTL_MACENTRY_GET_MORE:
-
-
- mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL);
- rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY));
- if (rtval != 0)
- {
- printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n");
- return (-EFAULT);
- }
- control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
- control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
- control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
- control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
- if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
- else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
- if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
- //initial the pointer to the first address
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- control[5]=0x030;//initial the first address
- ifx_sw_write(0x11f,control[5]);
-
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
-
- } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
- if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
- else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
- else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
- control[5]=0x02c;//search by the mac address field
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- ifx_sw_write(0x11a,control[0]);
- ifx_sw_write(0x11b,control[1]);
- ifx_sw_write(0x11c,control[2]);
- ifx_sw_write(0x11d,control[3]);
- ifx_sw_write(0x11e,control[4]);
- ifx_sw_write(0x11f,control[5]);
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- val=((val&0x7000)>>12);//result ,status5[14:12]
- mMACENTRY->result=val;
-
- if (!val) {
- printk(" Command OK!! \n");
- if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
- ifx_sw_read(0x120,&(status[0]));
- ifx_sw_read(0x121,&(status[1]));
- ifx_sw_read(0x122,&(status[2]));
- ifx_sw_read(0x123,&(status[3]));
- ifx_sw_read(0x124,&(status[4]));
- ifx_sw_read(0x125,&(status[5]));
-
-
- mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
- mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
- mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
- mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
- mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
- mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
- mMACENTRY->fid=(status[3]&0xf);
- mMACENTRY->portmap=((status[3]>>4)&0x3f);
- if (status[5]&0x2) {//static info_ctrl //status5[1]????
- mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
- mMACENTRY->info_type=1;
- }
- else {//not static age_timer
- mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
- mMACENTRY->info_type=0;
- }
-//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
- mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
- mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
- }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
-
- }
- else if (val==0x001)
- printk(" All Entry Used!! \n");
- else if (val==0x002)
- printk(" Entry Not Found!! \n");
- else if (val==0x003)
- printk(" Try Next Entry!! \n");
- else if (val==0x005)
- printk(" Command Error!! \n");
- else
- printk(" UnKnown Error!! \n");
-
- copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY));
-
- break;
-
- case ADM_SW_IOCTL_FILTER_ADD:
- case ADM_SW_IOCTL_FILTER_DEL:
- case ADM_SW_IOCTL_FILTER_GET:
-
- uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL);
- rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER));
- if (rtval != 0)
- {
- printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n");
- return (-EFAULT);
- }
-
- if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
- uPROTOCOLFILTER->ip_p=00; //delet filter
- uPROTOCOLFILTER->action=00; //delete filter
- } //delete filter
-
- ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
-
- if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
- else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
- }
- else {
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
- else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
- }
- if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
-
- ifx_sw_read(0x95, &val); //protocol filter action
- if(cmd==ADM_SW_IOCTL_FILTER_GET) {
- uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
- copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER));
-
- }
- else {
- val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
- // printk("%d----\n",val);
- ifx_sw_write(0x95, val); //write protocol filter action
- }
-
- break;
-//adm6996i
-
- /* others */
- default:
- return -EFAULT;
- }
- /* end of switch */
- return 0;
-}
-
-/* Santosh: handle IGMP protocol filter ADD/DEL/GET */
-int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER)
-{
- unsigned int val; //6996i
-
- if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter
- uPROTOCOLFILTER->ip_p=00; //delet filter
- uPROTOCOLFILTER->action=00; //delete filter
- } //delete filter
-
- ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7
-
- if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p
- else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p
- }
- else {
- if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p
- else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p
- }
- if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7
-
- ifx_sw_read(0x95, &val); //protocol filter action
- if(cmd==ADM_SW_IOCTL_FILTER_GET) {
- uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action
- }
- else {
- val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2));
- ifx_sw_write(0x95, val); //write protocol filter action
- }
-
- return 0;
-}
-
-
-/* Santosh: function for MAC ENTRY ADD/DEL/GET */
-
-int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY)
-{
- unsigned int val; //6996i
- unsigned int control[6] ; //6996i
- unsigned int status[6] ; //6996i
-
- // printk ("adm_process_mac_table_request: enter\n");
-
- control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ;
- control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ;
- control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ;
- control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4);
-
- if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control
- else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer
- if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) {
- //initial the pointer to the first address
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- control[5]=0x030;//initial the first address
- ifx_sw_write(0x11f,control[5]);
-
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
-
- } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)
- if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address
- else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address
- else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
- control[5]=0x02c;//search by the mac address field
-
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- ifx_sw_write(0x11a,control[0]);
- ifx_sw_write(0x11b,control[1]);
- ifx_sw_write(0x11c,control[2]);
- ifx_sw_write(0x11d,control[3]);
- ifx_sw_write(0x11e,control[4]);
- ifx_sw_write(0x11f,control[5]);
- val=0x8000;//busy ,status5[15]
- while(val&0x8000){ //check busy ?
- ifx_sw_read(0x125, &val);
- }
- val=((val&0x7000)>>12);//result ,status5[14:12]
- mMACENTRY->result=val;
-
- if (!val) {
- printk(" Command OK!! \n");
- if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) {
- ifx_sw_read(0x120,&(status[0]));
- ifx_sw_read(0x121,&(status[1]));
- ifx_sw_read(0x122,&(status[2]));
- ifx_sw_read(0x123,&(status[3]));
- ifx_sw_read(0x124,&(status[4]));
- ifx_sw_read(0x125,&(status[5]));
-
-
- mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ;
- mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ;
- mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ;
- mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ;
- mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ;
- mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ;
- mMACENTRY->fid=(status[3]&0xf);
- mMACENTRY->portmap=((status[3]>>4)&0x3f);
- if (status[5]&0x2) {//static info_ctrl //status5[1]????
- mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff);
- mMACENTRY->info_type=1;
- }
- else {//not static age_timer
- mMACENTRY->ctrl.age_timer=(status[4]&0x00ff);
- mMACENTRY->info_type=0;
- }
-//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1]
- mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ???
- mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2]
- }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE))
-
- }
- else if (val==0x001)
- printk(" All Entry Used!! \n");
- else if (val==0x002)
- printk(" Entry Not Found!! \n");
- else if (val==0x003)
- printk(" Try Next Entry!! \n");
- else if (val==0x005)
- printk(" Command Error!! \n");
- else
- printk(" UnKnown Error!! \n");
-
- // printk ("adm_process_mac_table_request: Exit\n");
- return 0;
-}
-
-/* Santosh: End of function for MAC ENTRY ADD/DEL*/
-struct file_operations adm_ops =
-{
- read: adm_read,
- write: adm_write,
- open: adm_open,
- release: adm_release,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
- unlocked_ioctl: adm_ioctl
-#else
- ioctl: adm_ioctl
-#endif
-};
-
-int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf+len, " ************ Registers ************ \n");
- *eof = 1;
- return len;
-}
-
-int __init init_adm6996_module(void)
-{
- unsigned int val = 000;
- unsigned int val1 = 000;
-
- printk("Loading ADM6996 driver... \n");
-
- /* if running on adm5120 */
- /* set GPIO 0~2 as adm6996 control pins */
- //outl(0x003f3f00, 0x12000028);
- /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */
- //outl(0x18a, 0x12000030);
- /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */
- //outl(0x417e, 0x12000040);
- /* end adm5120 fixup */
-#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
- register_chrdev(69, "adm6996", &adm_ops);
- AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be;
- AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc;
- adm6996_mode=adm6996i;
- ifx_sw_read(0xa0, &val);
- ifx_sw_read(0xa1, &val1);
- val=((val1&0x0f)<<16)|val;
- printk ("\nADM6996 SMI Mode-");
- printk ("Chip ID:%5x \n ", val);
-#else //000001.joelin
-
- AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50;
- AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff;
-
- AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
- AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC);
-
- ifx_gpio_init();
- register_chrdev(69, "adm6996", &adm_ops);
- mdelay(100);
-
- /* create proc entries */
- // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL);
-
-//joelin adm6996i support start
- adm6996_mode=adm6996i;
- ifx_sw_read(0xa0, &val);
- adm6996_mode=adm6996l;
- ifx_sw_read(0x200, &val1);
-// printk ("\n %0x \n",val1);
- if ((val&0xfff0)==0x1020) {
- printk ("\n ADM6996I .. \n");
- adm6996_mode=adm6996i;
- }
- else if ((val1&0xffffff00)==0x71000) {//71010 or 71020
- printk ("\n ADM6996LC .. \n");
- adm6996_mode=adm6996lc;
- }
- else {
- printk ("\n ADM6996L .. \n");
- adm6996_mode=adm6996l;
- }
-#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin
-
- if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){
-#if 0 /* removed by MarsLin */
- ifx_sw_write(0x29,0xc000);
- ifx_sw_write(0x30,0x0985);
-#else
- ifx_sw_read(0xa0, &val);
- if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch
- ifx_sw_write(0x29, 0x9000);
- ifx_sw_write(0x30,0x0985);
-#endif
- }
-//joelin adm6996i support end
- return 0;
-}
-
-void __exit cleanup_adm6996_module(void)
-{
- printk("Free ADM device driver... \n");
-
- unregister_chrdev(69, "adm6996");
-
- /* remove proc entries */
- // remove_proc_entry("admide", NULL);
-}
-
-/* MarsLin, add start */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
- #define SET_BIT(reg, mask) reg |= (mask)
- #define CLEAR_BIT(reg, mask) reg &= (~mask)
- static int ifx_hw_reset(void)
- {
- CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000);
- CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000);
- SET_BIT((*AMAZON_GPIO_P0_OD),0x2000);
- SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000);
- CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
- mdelay(500);
- SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000);
- cleanup_adm6996_module();
- return init_adm6996_module();
- }
- int (*adm6996_hw_reset)(void) = ifx_hw_reset;
- EXPORT_SYMBOL(adm6996_hw_reset);
- EXPORT_SYMBOL(adm6996_mode);
- int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read;
- EXPORT_SYMBOL(adm6996_sw_read);
- int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write;
- EXPORT_SYMBOL(adm6996_sw_write);
-#endif
-/* MarsLin, add end */
-
-/* Santosh: for IGMP proxy/snooping, Begin */
-EXPORT_SYMBOL (adm_process_mac_table_request);
-EXPORT_SYMBOL (adm_process_protocol_filter_request);
-/* Santosh: for IGMP proxy/snooping, End */
-
-MODULE_DESCRIPTION("ADMtek 6996 Driver");
-MODULE_AUTHOR("Joe Lin <joe.lin@infineon.com>");
-MODULE_LICENSE("GPL");
-
-module_init(init_adm6996_module);
-module_exit(cleanup_adm6996_module);
-
diff --git a/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c b/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c
deleted file mode 100644
index d18b439cea..0000000000
--- a/target/linux/amazon/files/drivers/net/ethernet/amazon_sw.c
+++ /dev/null
@@ -1,899 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- */
-//-----------------------------------------------------------------------
-/*
- * Description:
- * Driver for Infineon Amazon 3 port switch
- */
-//-----------------------------------------------------------------------
-/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com]
- * Created: 7-April-2004
- */
-//-----------------------------------------------------------------------
-/* History
- * Changed on: Jun 28, 2004
- * Changed by: peng.liu@infineon.com
- * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL)
- *
- * Changed on: Apr 6, 2005
- * Changed by: mars.lin@infineon.com
- * Reason : supoort port identification
- */
-
-
-// copyright 2004-2005 infineon.com
-
-// copyright 2007 john crispin <blogic@openwrt.org>
-// copyright 2007 felix fietkau <nbd@openwrt.org>
-// copyright 2009 hauke mehrtens <hauke@hauke-m.de>
-
-
-// TODO
-// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness
-// check all the mmi reg settings and possibly document them better
-// verify the ethtool code
-// remove the while(1) stuff
-// further clean up and rework ... but it works for now
-// check the mode[]=bridge stuff
-// verify that the ethaddr can be set from u-boot
-
-
-#ifndef __KERNEL__
-#define __KERNEL__
-#endif
-
-
-#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS)
-#define MODVERSIONS
-#endif
-
-#if defined(MODVERSIONS) && !defined(__GENKSYMS__)
-#include <linux/modversions.h>
-#endif
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/mii.h>
-#include <asm/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/in6.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/ethtool.h>
-#include <asm/checksum.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/amazon_dma.h>
-#include <asm/amazon/amazon_sw.h>
-
-// how many mii ports are there ?
-#define AMAZON_SW_INT_NO 2
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536
-
-/***************************************** Module Parameters *************************************/
-static char mode[] = "bridge";
-module_param_array(mode, charp, NULL, 0);
-
-static int timeout = 1 * HZ;
-module_param(timeout, int, 0);
-
-int switch_init(struct net_device *dev);
-void switch_tx_timeout(struct net_device *dev);
-
-static struct net_device *switch_devs[2];
-
-int add_mac_table_entry(u64 entry_value)
-{
- int i;
- u32 data1, data2;
-
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7;
-
- for (i = 0; i < 32; i++) {
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1);
- data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
- if ((data1 & (0x00700000)) != 0x00700000)
- continue;
- AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32);
- AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- break;
- }
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7;
- if (i >= 32)
- return -1;
- return OK;
-}
-
-u64 read_mac_table_entry(int index)
-{
- u32 data1, data2;
- u64 value;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff;
- data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2);
- value = (u64) data1 << 32 | (u64) data2;
- return value;
-}
-
-int write_mac_table_entry(int index, u64 value)
-{
- u32 data1, data2;
- data1 = (u32) (value >> 32);
- data2 = (u32) value & 0xffffffff;
- AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1;
- AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2;
- AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index;
- while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {};
- return OK;
-}
-
-u32 get_mdio_reg(int phy_addr, int reg_num)
-{
- u32 value;
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16);
- while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
- value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff;
- return value;
-}
-
-int set_mdio_reg(int phy_addr, int reg_num, u32 value)
-{
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff);
- while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {};
- return OK;
-}
-
-int auto_negotiate(int phy_addr)
-{
- u32 value = 0;
- value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG);
- set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET));
- return OK;
-}
-
-/*
- In this version of switch driver, we split the dma channels for the switch.
- 2 for port0 and 2 for port1. So that we can do internal bridging if necessary.
- In switch mode, packets coming in from port0 or port1 is able to do Destination
- address lookup. Packets coming from port0 with destination address of port1 should
- not go to pmac again. The switch hardware should be able to do the switch in the hard
- ware level. Packets coming from the pmac should not do the DA look up in that the
- desination is already known for the kernel. It only needs to go to the correct NIC to
- find its way out.
- */
-int amazon_sw_chip_init(void)
-{
- u32 tmp1;
- int i = 0;
-
- /* Aging tick select: 5mins */
- tmp1 = 0xa0;
- if (strcmp(mode, "bridge") == 0) {
- // bridge mode, set militarised mode to 1, no learning!
- tmp1 |= 0xC00;
- } else {
- // enable learning for P0 and P1,
- tmp1 |= 3;
- }
-
- /* unknown broadcast/multicast/unicast to all ports */
- AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff;
-
- AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1;
-
- /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */
-#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE)
- AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700;
-#else
- AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401;
-#endif
-
- /* EPC: 1 split the two NIC in tx direction CRC is generated */
- AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6;
-
- // for bi-directional
- AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412;
- AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412;
- AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826;
- AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0;
-
- AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000;
- // clock for PHY
- AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004;
- // enable power for PHY
- AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY;
- // set reverse MII, enable MDIO statemachine
- AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf;
- while (1)
- if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0)
- break;
- AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff;
-
- // auto negotiation
- AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000;
- auto_negotiate(0x1f);
-
- /* enable all ports */
- AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7;
- for (i = 0; i < 32; i++)
- write_mac_table_entry(i, 1 << 50);
- return 0;
-}
-
-static unsigned char my_ethaddr[MAX_ADDR_LEN];
-/* need to get the ether addr from u-boot */
-static int __init ethaddr_setup(char *line)
-{
- char *ep;
- int i;
-
- memset(my_ethaddr, 0, MAX_ADDR_LEN);
- for (i = 0; i < 6; i++) {
- my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0;
- if (line)
- line = (*ep) ? ep + 1 : ep;
- }
- printk(KERN_INFO "amazon_mii0: mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]);
- return 0;
-}
-
-__setup("ethaddr=", ethaddr_setup);
-
-static void open_rx_dma(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 1;
- dma_device_update_rx(dma_dev);
-}
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
-static void close_rx_dma(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 0;
- dma_device_update_rx(dma_dev);
-}
-
-void amazon_xon(struct net_device *dev)
-{
- unsigned long flag;
- local_irq_save(flag);
- open_rx_dma(dev);
- local_irq_restore(flag);
-}
-#endif
-
-int switch_open(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- if (!strcmp(dev->name, "eth1")) {
- priv->mdio_phy_addr = PHY0_ADDR;
- }
- open_rx_dma(dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) {
- printk(KERN_WARNING "amazon_mii0: Hardware Flow Control register fails\n");
- }
-#endif
-
- netif_start_queue(dev);
- return OK;
-}
-
-int switch_release(struct net_device *dev)
-{
- int i;
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- for (i = 0; i < dma_dev->num_tx_chan; i++)
- dma_dev->tx_chan[i].control = 0;
- for (i = 0; i < dma_dev->num_rx_chan; i++)
- dma_dev->rx_chan[i].control = 0;
-
- dma_device_update(dma_dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- if (priv->fc_bit) {
- netdev_unregister_fc(priv->fc_bit);
- }
-#endif
- netif_stop_queue(dev);
-
- return OK;
-}
-
-
-void switch_rx(struct net_device *dev, int len, struct sk_buff *skb)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- int mit_sel = 0;
-#endif
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- mit_sel = netif_rx(skb);
- switch (mit_sel) {
- case NET_RX_SUCCESS:
- case NET_RX_CN_LOW:
- case NET_RX_CN_MOD:
- break;
- case NET_RX_CN_HIGH:
- break;
- case NET_RX_DROP:
- if ((priv->fc_bit)
- && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) {
- close_rx_dma(dev);
- }
- break;
- }
-#else
- netif_rx(skb);
-#endif
- priv->stats.rx_packets++;
- priv->stats.rx_bytes += len;
- return;
-}
-
-int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev)
-{
- struct switch_priv *priv = netdev_priv(dev);
- struct dma_device_info *dma_dev = priv->dma_device;
-
- dma_dev->current_tx_chan = 0;
- return dma_device_write(dma_dev, buf, len, priv->skb);
-}
-
-int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev)
-{
- int len;
- char *data;
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- data = skb->data;
- priv->skb = skb;
- dev->trans_start = jiffies;
-
- if (switch_hw_tx(data, len, dev) != len) {
- dev_kfree_skb_any(skb);
- return OK;
- }
-
- priv->stats.tx_packets++;
- priv->stats.tx_bytes += len;
- return OK;
-}
-
-void switch_tx_timeout(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- priv->stats.tx_errors++;
- netif_wake_queue(dev);
- return;
-}
-
-void negotiate(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG);
-
- data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD);
-
- switch (priv->current_speed_selection) {
- case 10:
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_10_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_10_HD;
- else
- data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD;
- break;
-
- case 100:
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_100_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_100_HD;
- else
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD;
- break;
-
- case 0: /* Auto */
- if (priv->current_duplex == full)
- data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD;
- else if (priv->current_duplex == half)
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD;
- else
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
- break;
-
- default: /* assume autoneg speed and duplex */
- data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD;
- }
-
- set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data);
-
- /* Renegotiate with link partner */
-
- data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG);
- data |= MDIO_BC_NEGOTIATE;
-
- set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data);
-
-}
-
-
-void set_duplex(struct net_device *dev, enum duplex new_duplex)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- if (new_duplex != priv->current_duplex) {
- priv->current_duplex = new_duplex;
- negotiate(dev);
- }
-}
-
-void set_speed(struct net_device *dev, unsigned long speed)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- priv->current_speed_selection = speed;
- negotiate(dev);
-}
-
-static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- struct ethtool_cmd ecmd;
-
- if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd)))
- return -EFAULT;
-
- switch (ecmd.cmd) {
- case ETHTOOL_GSET:
- memset((void *) &ecmd, 0, sizeof(ecmd));
- ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
- ecmd.port = PORT_TP;
- ecmd.transceiver = XCVR_EXTERNAL;
- ecmd.phy_address = priv->mdio_phy_addr;
-
- ecmd.speed = priv->current_speed;
-
- ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
-
- ecmd.advertising = ADVERTISED_TP;
- if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
- ecmd.advertising |= ADVERTISED_Autoneg;
- else {
- ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
- ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
- if (priv->current_speed_selection == 10)
- ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full);
- else if (priv->current_speed_selection == 100)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full);
- if (priv->current_duplex == half)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full);
- else if (priv->current_duplex == full)
- ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half);
- }
- ecmd.autoneg = AUTONEG_ENABLE;
- if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd)))
- return -EFAULT;
- break;
-
- case ETHTOOL_SSET:
- if (!capable(CAP_NET_ADMIN)) {
- return -EPERM;
- }
- if (ecmd.autoneg == AUTONEG_ENABLE) {
- set_duplex(dev, autoneg);
- set_speed(dev, 0);
- } else {
- set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full);
- set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100);
- }
- break;
-
- case ETHTOOL_GDRVINFO:
- {
- struct ethtool_drvinfo info;
- memset((void *) &info, 0, sizeof(info));
- strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1);
- strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1);
- strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1);
- info.regdump_len = 0;
- info.eedump_len = 0;
- info.testinfo_len = 0;
- if (copy_to_user(ifr->ifr_data, &info, sizeof(info)))
- return -EFAULT;
- }
- break;
- case ETHTOOL_NWAY_RST:
- if (priv->current_duplex == autoneg && priv->current_speed_selection == 0)
- negotiate(dev);
- break;
- default:
- return -EOPNOTSUPP;
- break;
- }
- return 0;
-}
-
-
-
-int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req)
-{
- int cmd;
- int i;
- cmd = req->cmd;
- switch (cmd) {
- case RESET_MAC_TABLE:
- for (i = 0; i < 32; i++) {
- write_mac_table_entry(i, 0);
- }
- break;
- case READ_MAC_ENTRY:
- req->entry_value = read_mac_table_entry(req->index);
- break;
- case WRITE_MAC_ENTRY:
- write_mac_table_entry(req->index, req->entry_value);
- break;
- case ADD_MAC_ENTRY:
- add_mac_table_entry(req->entry_value);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-/*
- the ioctl for the switch driver is developed in the conventional way
- the control type falls into some basic categories, among them, the
- SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and
- MAC_TABLE_TOOLS are designed specifically for amazon chip. User
- should be aware of the data structures used in these interfaces.
-*/
-int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data;
- struct mac_table_req *switch_mac_table_req;
- switch (cmd) {
- case SIOCETHTOOL:
- switch_ethtool_ioctl(dev, ifr);
- break;
- case SIOCGMIIPHY: /* Get PHY address */
- break;
- case SIOCGMIIREG: /* Read MII register */
- break;
- case SIOCSMIIREG: /* Write MII register */
- break;
- case SET_ETH_SPEED_10: /* 10 Mbps */
- break;
- case SET_ETH_SPEED_100: /* 100 Mbps */
- break;
- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
- break;
- case SET_ETH_DUPLEX_HALF: /* Half duplex. */
- break;
- case SET_ETH_DUPLEX_FULL: /* Full duplex. */
- break;
- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */
- break;
- case SET_ETH_REG:
- AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value;
- break;
- case MAC_TABLE_TOOLS:
- switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data;
- mac_table_tools_ioctl(dev, switch_mac_table_req);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-struct net_device_stats *switch_stats(struct net_device *dev)
-{
- struct switch_priv *priv = (struct switch_priv *) netdev_priv(dev);
- return &priv->stats;
-}
-
-int switch_change_mtu(struct net_device *dev, int new_mtu)
-{
- if (new_mtu >= 1516)
- new_mtu = 1516;
- dev->mtu = new_mtu;
- return 0;
-}
-
-int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
-{
- u8 *buf = NULL;
- int len = 0;
- struct sk_buff *skb = NULL;
-
- len = dma_device_read(dma_dev, &buf, (void **) &skb);
-
- if (len >= 0x600) {
- printk(KERN_WARNING "amazon_mii0: packet too large %d\n", len);
- goto switch_hw_receive_err_exit;
- }
-
- /* remove CRC */
- len -= 4;
- if (skb == NULL) {
- printk(KERN_WARNING "amazon_mii0: cannot restore pointer\n");
- goto switch_hw_receive_err_exit;
- }
- if (len > (skb->end - skb->tail)) {
- printk(KERN_WARNING "amazon_mii0: BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail);
- goto switch_hw_receive_err_exit;
- }
- skb_put(skb, len);
- skb->dev = dev;
- switch_rx(dev, len, skb);
- return OK;
-
- switch_hw_receive_err_exit:
- if (skb)
- dev_kfree_skb_any(skb);
- return -EIO;
-}
-
-int dma_intr_handler(struct dma_device_info *dma_dev, int status)
-{
- struct net_device *dev;
-
- dev = dma_dev->priv;
- switch (status) {
- case RCV_INT:
- switch_hw_receive(dev, dma_dev);
- break;
- case TX_BUF_FULL_INT:
- netif_stop_queue(dev);
- break;
- case TRANSMIT_CPT_INT:
- netif_wake_queue(dev);
- break;
- }
- return OK;
-}
-
-/* reserve 2 bytes in front of data pointer*/
-u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt)
-{
- u8 *buffer = NULL;
- struct sk_buff *skb = NULL;
- skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
- if (skb == NULL) {
- return NULL;
- }
- buffer = (u8 *) (skb->data);
- skb_reserve(skb, 2);
- *(int *) opt = (int) skb;
- *byte_offset = 2;
- return buffer;
-}
-
-int dma_buffer_free(u8 * dataptr, void *opt)
-{
- struct sk_buff *skb = NULL;
- if (opt == NULL) {
- kfree(dataptr);
- } else {
- skb = (struct sk_buff *) opt;
- dev_kfree_skb_any(skb);
- }
- return OK;
-}
-
-int init_dma_device(_dma_device_info * dma_dev, struct net_device *dev)
-{
- int i;
- int num_tx_chan, num_rx_chan;
- if (strcmp(dma_dev->device_name, "switch1") == 0) {
- num_tx_chan = 1;
- num_rx_chan = 2;
- } else {
- num_tx_chan = 1;
- num_rx_chan = 2;
- }
- dma_dev->priv = dev;
-
- dma_dev->weight = 1;
- dma_dev->num_tx_chan = num_tx_chan;
- dma_dev->num_rx_chan = num_rx_chan;
- dma_dev->ack = 1;
- dma_dev->tx_burst_len = 4;
- dma_dev->rx_burst_len = 4;
- for (i = 0; i < dma_dev->num_tx_chan; i++) {
- dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT;
- dma_dev->tx_chan[i].desc_num = 10;
- dma_dev->tx_chan[i].packet_size = 0;
- dma_dev->tx_chan[i].control = 0;
- }
- for (i = 0; i < num_rx_chan; i++) {
- dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT;
- dma_dev->rx_chan[i].desc_num = 10;
- dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
- dma_dev->rx_chan[i].control = 0;
- }
- dma_dev->intr_handler = dma_intr_handler;
- dma_dev->buffer_alloc = dma_buffer_alloc;
- dma_dev->buffer_free = dma_buffer_free;
- return 0;
-}
-
-int switch_set_mac_address(struct net_device *dev, void *p)
-{
- struct sockaddr *addr = p;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
- return OK;
-}
-
-static const struct net_device_ops amazon_mii_ops = {
- .ndo_init = switch_init,
- .ndo_open = switch_open,
- .ndo_stop = switch_release,
- .ndo_start_xmit = switch_tx,
- .ndo_do_ioctl = switch_ioctl,
- .ndo_get_stats = switch_stats,
- .ndo_change_mtu = switch_change_mtu,
- .ndo_set_mac_address = switch_set_mac_address,
- .ndo_tx_timeout = switch_tx_timeout,
-};
-
-int switch_init(struct net_device *dev)
-{
- u64 retval = 0;
- int i;
- int result;
- struct switch_priv *priv;
- ether_setup(dev); /* assign some of the fields */
- printk(KERN_INFO "amazon_mii0: %s up using ", dev->name);
- dev->watchdog_timeo = timeout;
-
- priv = netdev_priv(dev);
- priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL);
- if (priv->num == 0) {
- sprintf(priv->dma_device->device_name, "switch1");
- } else if (priv->num == 1) {
- sprintf(priv->dma_device->device_name, "switch2");
- }
- printk("\"%s\"\n", priv->dma_device->device_name);
- init_dma_device(priv->dma_device, dev);
- result = dma_device_register(priv->dma_device);
-
- /* read the mac address from the mac table and put them into the mac table. */
- for (i = 0; i < 6; i++) {
- retval += my_ethaddr[i];
- }
- /* ethaddr not set in u-boot ? */
- if (retval == 0) {
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x20;
- dev->dev_addr[2] = 0xda;
- dev->dev_addr[3] = 0x86;
- dev->dev_addr[4] = 0x23;
- dev->dev_addr[5] = 0x74 + (unsigned char) priv->num;
- } else {
- for (i = 0; i < 6; i++) {
- dev->dev_addr[i] = my_ethaddr[i];
- }
- dev->dev_addr[5] += +(unsigned char) priv->num;
- }
- return OK;
-}
-
-static int amazon_mii_probe(struct platform_device *dev)
-{
- int i = 0, result, device_present = 0;
- struct switch_priv *priv;
-
- for (i = 0; i < AMAZON_SW_INT_NO; i++) {
- switch_devs[i] = alloc_etherdev(sizeof(struct switch_priv));
- switch_devs[i]->netdev_ops = &amazon_mii_ops;
- strcpy(switch_devs[i]->name, "eth%d");
- priv = (struct switch_priv *) netdev_priv(switch_devs[i]);
- priv->num = i;
- if ((result = register_netdev(switch_devs[i])))
- printk(KERN_WARNING "amazon_mii0: error %i registering device \"%s\"\n", result, switch_devs[i]->name);
- else
- device_present++;
- }
- amazon_sw_chip_init();
- return device_present ? 0 : -ENODEV;
-}
-
-static int amazon_mii_remove(struct platform_device *dev)
-{
- int i;
- struct switch_priv *priv;
- for (i = 0; i < AMAZON_SW_INT_NO; i++) {
- priv = netdev_priv(switch_devs[i]);
- if (priv->dma_device) {
- dma_device_unregister(priv->dma_device);
- kfree(priv->dma_device);
- }
- kfree(netdev_priv(switch_devs[i]));
- unregister_netdev(switch_devs[i]);
- }
- return 0;
-}
-
-static struct platform_driver amazon_mii_driver = {
- .probe = amazon_mii_probe,
- .remove = amazon_mii_remove,
- .driver = {
- .name = "amazon_mii0",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_mii_init(void)
-{
- int ret = platform_driver_register(&amazon_mii_driver);
- if (ret)
- printk(KERN_WARNING "amazon_mii0: Error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_mii_cleanup(void)
-{
- platform_driver_unregister(&amazon_mii_driver);
-}
-
-module_init(amazon_mii_init);
-module_exit(amazon_mii_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Wu Qi Ming");
-MODULE_DESCRIPTION("ethernet driver for AMAZON boards");
-
diff --git a/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c b/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c
deleted file mode 100644
index bb2dd72222..0000000000
--- a/target/linux/amazon/files/drivers/tty/serial/amazon_asc.c
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Driver for AMAZONASC serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Based on drivers/serial/serial_s3c2400.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2004 Infineon IFAP DC COM CPE
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/serial.h>
-
-#define PORT_AMAZONASC 111
-
-#include <linux/serial_core.h>
-
-#define UART_NR 1
-
-#define UART_DUMMY_UER_RX 1
-
-#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR
-#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR
-#define SERIAL_AMAZONASC_MINOR 64
-#define SERIAL_AMAZONASC_NR UART_NR
-
-static void amazonasc_tx_chars(struct uart_port *port);
-static struct uart_port amazonasc_ports[UART_NR];
-static struct uart_driver amazonasc_reg;
-static unsigned int uartclk = 0;
-
-static void amazonasc_stop_tx(struct uart_port *port)
-{
- /* fifo underrun shuts up after firing once */
- return;
-}
-
-static void amazonasc_start_tx(struct uart_port *port)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- amazonasc_tx_chars(port);
- local_irq_restore(flags);
-
- return;
-}
-
-static void amazonasc_stop_rx(struct uart_port *port)
-{
- /* clear the RX enable bit */
- amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON);
-}
-
-static void amazonasc_enable_ms(struct uart_port *port)
-{
- /* no modem signals */
- return;
-}
-
-#include <linux/version.h>
-
-static void
-amazonasc_rx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct tty_struct *tty = port->state->port.tty;
-#else
- struct tty_struct *tty = port->info->port.tty;
-#endif
- unsigned int ch = 0, rsr = 0, fifocnt;
-
- fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK;
- while (fifocnt--)
- {
- u8 flag = TTY_NORMAL;
- ch = amazon_readl(AMAZON_ASC_RBUF);
- rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX;
- tty_flip_buffer_push(tty);
- port->icount.rx++;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (rsr & ASCCON_ANY) {
- if (rsr & ASCCON_PE) {
- port->icount.parity++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE);
- } else if (rsr & ASCCON_FE) {
- port->icount.frame++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE);
- }
- if (rsr & ASCCON_OE) {
- port->icount.overrun++;
- amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE);
- }
-
- rsr &= port->read_status_mask;
-
- if (rsr & ASCCON_PE)
- flag = TTY_PARITY;
- else if (rsr & ASCCON_FE)
- flag = TTY_FRAME;
- }
-
- if ((rsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (rsr & ASCCON_OE)
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- if (ch != 0)
- tty_flip_buffer_push(tty);
-
- return;
-}
-
-
-static void amazonasc_tx_chars(struct uart_port *port)
-{
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
- struct circ_buf *xmit = &port->state->xmit;
-#else
- struct circ_buf *xmit = &port->info->xmit;
-#endif
-
- if (uart_tx_stopped(port)) {
- amazonasc_stop_tx(port);
- return;
- }
-
- while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL)
- {
- if (port->x_char) {
- amazon_writel(port->x_char, AMAZON_ASC_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
-static irqreturn_t amazonasc_tx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1);
- amazonasc_start_tx(port);
-
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_er_int(int irq, void *port)
-{
- /* clear any pending interrupts */
- amazon_writel_masked(AMAZON_ASC_WHBCON,
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE),
- (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE));
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t amazonasc_rx_int(int irq, void *port)
-{
- amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1);
- amazonasc_rx_chars((struct uart_port *) port);
- return IRQ_HANDLED;
-}
-
-static u_int amazonasc_tx_empty(struct uart_port *port)
-{
- int status;
-
- /*
- * FSTAT tells exactly how many bytes are in the FIFO.
- * The question is whether we really need to wait for all
- * 16 bytes to be transmitted before reporting that the
- * transmitter is empty.
- */
- status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK;
- return status ? 0 : TIOCSER_TEMT;
-}
-
-static u_int amazonasc_get_mctrl(struct uart_port *port)
-{
- /* no modem control signals - the readme says to pretend all are set */
- return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR;
-}
-
-static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- /* no modem control - just return */
- return;
-}
-
-static void amazonasc_break_ctl(struct uart_port *port, int break_state)
-{
- /* no way to send a break */
- return;
-}
-
-static int amazonasc_startup(struct uart_port *port)
-{
- unsigned int con = 0;
- unsigned long flags;
- int retval;
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
-
- amazonasc_ports[0].uartclk = uartclk;
-
- local_irq_save(flags);
-
- /* this setup was probably already done in u-boot */
- /* ASC and GPIO Port 1 bits 3 and 4 share the same pins
- * P1.3 (RX) in, Alternate 10
- * P1.4 (TX) in, Alternate 10
- */
- amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11
- amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00
- amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10);
-
- /* set up the CLC */
- amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0);
- amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET);
-
- /* asynchronous mode */
- con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN;
-
- /* choose the line - there's only one */
- amazon_writel(0, AMAZON_ASC_PISEL);
- amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU,
- AMAZON_ASC_TXFCON);
- amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU,
- AMAZON_ASC_RXFCON);
- wmb();
-
- amazon_writel_masked(AMAZON_ASC_CON, con, con);
-
- retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port);
- if (retval){
- printk("failed to request amazonasc_rx_int\n");
- return retval;
- }
- retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port);
- if (retval){
- printk("failed to request amazonasc_tx_int\n");
- goto err1;
- }
-
- retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port);
- if (retval){
- printk("failed to request amazonasc_er_int\n");
- goto err2;
- }
-
- local_irq_restore(flags);
- return 0;
-
-err2:
- free_irq(AMAZONASC_TIR, port);
-
-err1:
- free_irq(AMAZONASC_RIR, port);
- local_irq_restore(flags);
- return retval;
-}
-
-static void amazonasc_shutdown(struct uart_port *port)
-{
- free_irq(AMAZONASC_RIR, port);
- free_irq(AMAZONASC_TIR, port);
- free_irq(AMAZONASC_EIR, port);
- /*
- * disable the baudrate generator to disable the ASC
- */
- amazon_writel(0, AMAZON_ASC_CON);
-
- /* flush and then disable the fifos */
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU);
- amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU);
- amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0);
-}
-
-static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
-{
- unsigned int cflag;
- unsigned int iflag;
- unsigned int baud, quot;
- unsigned int con = 0;
- unsigned long flags;
-
- cflag = new->c_cflag;
- iflag = new->c_iflag;
-
- /* byte size and parity */
- switch (cflag & CSIZE) {
- /* 7 bits are always with parity */
- case CS7: con = ASCCON_M_7ASYNCPAR; break;
- /* the ASC only suports 7 and 8 bits */
- case CS5:
- case CS6:
- default:
- if (cflag & PARENB)
- con = ASCCON_M_8ASYNCPAR;
- else
- con = ASCCON_M_8ASYNC;
- break;
- }
- if (cflag & CSTOPB)
- con |= ASCCON_STP;
- if (cflag & PARENB) {
- if (!(cflag & PARODD))
- con &= ~ASCCON_ODD;
- else
- con |= ASCCON_ODD;
- }
-
- port->read_status_mask = ASCCON_OE;
- if (iflag & INPCK)
- port->read_status_mask |= ASCCON_FE | ASCCON_PE;
-
- port->ignore_status_mask = 0;
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_FE | ASCCON_PE;
-
- if (iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCCON_OE;
- }
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_UER_RX;
-
- /* set error signals - framing, parity and overrun */
- con |= ASCCON_FEN;
- con |= ASCCON_OEN;
- con |= ASCCON_PEN;
- /* enable the receiver */
- con |= ASCCON_REN;
-
- /* block the IRQs */
- local_irq_save(flags);
-
- /* set up CON */
- amazon_writel(con, AMAZON_ASC_CON);
-
- /* Set baud rate - take a divider of 2 into account */
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
- quot = quot/2 - 1;
-
- /* the next 3 probably already happened when we set CON above */
- /* disable the baudrate generator */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0);
- /* make sure the fractional divider is off */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0);
- /* set up to use divisor of 2 */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0);
- /* now we can write the new baudrate into the register */
- amazon_writel(quot, AMAZON_ASC_BTR);
- /* turn the baudrate generator back on */
- amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R);
-
- local_irq_restore(flags);
-}
-
-static const char *amazonasc_type(struct uart_port *port)
-{
- return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'
- */
-static void amazonasc_release_port(struct uart_port *port)
-{
- return;
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int amazonasc_request_port(struct uart_port *port)
-{
- return 0;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void amazonasc_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_AMAZONASC;
- amazonasc_request_port(port);
- }
-}
-
-/*
- * verify the new serial_struct (for TIOCSSERIAL).
- */
-static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- int ret = 0;
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC)
- ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
- ret = -EINVAL;
- if (ser->baud_base < 9600)
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops amazonasc_pops = {
- .tx_empty = amazonasc_tx_empty,
- .set_mctrl = amazonasc_set_mctrl,
- .get_mctrl = amazonasc_get_mctrl,
- .stop_tx = amazonasc_stop_tx,
- .start_tx = amazonasc_start_tx,
- .stop_rx = amazonasc_stop_rx,
- .enable_ms = amazonasc_enable_ms,
- .break_ctl = amazonasc_break_ctl,
- .startup = amazonasc_startup,
- .shutdown = amazonasc_shutdown,
- .set_termios = amazonasc_set_termios,
- .type = amazonasc_type,
- .release_port = amazonasc_release_port,
- .request_port = amazonasc_request_port,
- .config_port = amazonasc_config_port,
- .verify_port = amazonasc_verify_port,
-};
-
-static struct uart_port amazonasc_ports[UART_NR] = {
- {
- membase: (void *)AMAZON_ASC,
- mapbase: AMAZON_ASC,
- iotype: SERIAL_IO_MEM,
- irq: AMAZONASC_RIR, /* RIR */
- uartclk: 0, /* filled in dynamically */
- fifosize: 16,
- unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */
- type: PORT_AMAZONASC,
- ops: &amazonasc_pops,
- flags: ASYNC_BOOT_AUTOCONF,
- },
-};
-
-static void amazonasc_console_write(struct console *co, const char *s, u_int count)
-{
- int i, fifocnt;
- unsigned long flags;
- local_irq_save(flags);
- for (i = 0; i < count;)
- {
- /* wait until the FIFO is not full */
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- if (s[i] == '\0')
- {
- break;
- }
- if (s[i] == '\n')
- {
- amazon_writel('\r', AMAZON_ASC_TBUF);
- do
- {
- fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) &
- ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == AMAZONASC_TXFIFO_FULL);
- }
- amazon_writel(s[i], AMAZON_ASC_TBUF);
- i++;
- }
-
- local_irq_restore(flags);
-}
-
-static void __init
-amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-{
- u_int lcr_h;
-
- lcr_h = amazon_readl(AMAZON_ASC_CON);
- /* do this only if the ASC is turned on */
- if (lcr_h & ASCCON_R) {
- u_int quot, div, fdiv, frac;
-
- *parity = 'n';
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR ||
- (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) {
- if (lcr_h & ASCCON_ODD)
- *parity = 'o';
- else
- *parity = 'e';
- }
-
- if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR)
- *bits = 7;
- else
- *bits = 8;
-
- quot = amazon_readl(AMAZON_ASC_BTR) + 1;
-
- /* this gets hairy if the fractional divider is used */
- if (lcr_h & ASCCON_FDE)
- {
- div = 1;
- fdiv = amazon_readl(AMAZON_ASC_FDV);
- if (fdiv == 0)
- fdiv = 512;
- frac = 512;
- }
- else
- {
- div = lcr_h & ASCCON_BRS ? 3 : 2;
- fdiv = frac = 1;
- }
- /*
- * This doesn't work exactly because we use integer
- * math to calculate baud which results in rounding
- * errors when we try to go from quot -> baud !!
- * Try to make this work for both the fractional divider
- * and the simple divider. Also try to avoid rounding
- * errors using integer math.
- */
-
- *baud = frac * (port->uartclk / (div * 512 * 16 * quot));
- if (*baud > 1100 && *baud < 2400)
- *baud = 1200;
- if (*baud > 2300 && *baud < 4800)
- *baud = 2400;
- if (*baud > 4700 && *baud < 9600)
- *baud = 4800;
- if (*baud > 9500 && *baud < 19200)
- *baud = 9600;
- if (*baud > 19000 && *baud < 38400)
- *baud = 19200;
- if (*baud > 38400 && *baud < 57600)
- *baud = 38400;
- if (*baud > 57600 && *baud < 115200)
- *baud = 57600;
- if (*baud > 115200 && *baud < 230400)
- *baud = 115200;
- }
-}
-
-static int __init amazonasc_console_setup(struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = amazon_get_fpi_hz();
- co->index = 0;
- port = &amazonasc_ports[0];
- amazonasc_ports[0].uartclk = uartclk;
- amazonasc_ports[0].type = PORT_AMAZONASC;
-
- if (options){
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- }
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver amazonasc_reg;
-static struct console amazonasc_console = {
- name: "ttyS",
- write: amazonasc_console_write,
- device: uart_console_device,
- setup: amazonasc_console_setup,
- flags: CON_PRINTBUFFER,
- index: -1,
- data: &amazonasc_reg,
-};
-
-static struct uart_driver amazonasc_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = UART_NR,
- .cons = &amazonasc_console,
-};
-
-static int amazon_asc_probe(struct platform_device *dev)
-{
- unsigned char res;
- uart_register_driver(&amazonasc_reg);
- res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]);
- return res;
-}
-
-static int amazon_asc_remove(struct platform_device *dev)
-{
- uart_unregister_driver(&amazonasc_reg);
- return 0;
-}
-
-static struct platform_driver amazon_asc_driver = {
- .probe = amazon_asc_probe,
- .remove = amazon_asc_remove,
- .driver = {
- .name = "amazon_asc",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_asc_init(void)
-{
- int ret = platform_driver_register(&amazon_asc_driver);
- if (ret)
- printk(KERN_WARNING "amazon_asc: error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_asc_cleanup(void)
-{
- platform_driver_unregister(&amazon_asc_driver);
-}
-
-module_init(amazon_asc_init);
-module_exit(amazon_asc_cleanup);
-
-MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin");
-MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver");
-MODULE_LICENSE("GPL");
-
diff --git a/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c b/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c
deleted file mode 100644
index b18296b794..0000000000
--- a/target/linux/amazon/files/drivers/watchdog/amazon_wdt.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright 2004 Wu Qi Ming <gokimi@msn.com>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/kdev_t.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/platform_device.h>
-#include <asm/amazon/amazon.h>
-#include <asm/amazon/amazon_wdt.h>
-
-#define DRV_NAME "AMAZON WDT:"
-
-#undef AMAZON_WDT_DEBUG
-
-static int amazon_wdt_isopen = 0;
-
-#ifdef AMAZON_WDT_DEBUG
-static struct proc_dir_entry* amazon_wdt_dir;
-#endif
-
-int wdt_enable(int timeout)
-{
- u32 hard_psw, ffpi;
- int reload_value, divider = 1;
-
- ffpi = amazon_get_fpi_hz();
-
- reload_value = 65536 - timeout * ffpi / 256;
-
- if (reload_value < 0) {
- divider = 0;
- reload_value = 65536 - timeout * ffpi / 16384;
- }
-
- if (reload_value < 0){
- printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout);
- return -EINVAL;
- }
-
- printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value);
-
- hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
- (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
- amazon_writel(hard_psw, AMAZON_WDT_CON0);
- wmb();
-
- amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0);
- wmb();
-
- amazon_writel(divider << 2, AMAZON_WDT_CON1);
- wmb();
-
- hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
- (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
- amazon_writel(hard_psw, AMAZON_WDT_CON0);
- wmb();
-
- amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
- wmb();
- return 0;
-}
-
-void wdt_disable(void)
-{
- u32 hard_psw = 0;
-
- hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
- (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
- amazon_writel(hard_psw, AMAZON_WDT_CON0);
- wmb();
-
- amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2);
- wmb();
-
- amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8);
- wmb();
-
- hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) +
- (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0;
- amazon_writel(hard_psw, AMAZON_WDT_CON0);
- wmb();
-
- amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3);
- wmb();
-
- return;
-}
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
-static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-#else
-static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-#endif
-{
- int result=0;
- static int timeout=-1;
-
- switch(cmd){
- case AMAZON_WDT_IOC_START:
- printk(KERN_INFO DRV_NAME "enable watch dog timer!\n");
- if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) {
- printk(KERN_INFO DRV_NAME "invalid argument\n");
- result=-EINVAL;
- } else if ((result = wdt_enable(timeout)) < 0) {
- timeout = -1;
- }
- break;
-
- case AMAZON_WDT_IOC_STOP:
- printk(KERN_INFO DRV_NAME "disable watch dog timer\n");
- timeout = -1;
- wdt_disable();
- break;
-
- case AMAZON_WDT_IOC_PING:
- if (timeout < 0) {
- result = -EIO;
- } else {
- result = wdt_enable(timeout);
- }
- break;
-
- default:
- result=-EINVAL;
- break;
- }
- return result;
-}
-
-static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset)
-{
- return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset)
-{
- return count;
-}
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
- if (amazon_wdt_isopen == 1)
- return -EBUSY;
-
- amazon_wdt_isopen = 1;
- printk(KERN_INFO DRV_NAME "opened\n");
- return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
- amazon_wdt_isopen = 0;
- printk(KERN_INFO DRV_NAME "closed\n");
- return 0;
-}
-
-#ifdef AMAZON_WDT_DEBUG
-int wdt_register_proc_read(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len=0;
- len+=sprintf(buf+len,"NMISR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR));
- len+=sprintf(buf+len,"RST_REQ: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ));
- len+=sprintf(buf+len,"RST_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR));
- len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0));
- len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1));
- len+=sprintf(buf+len,"WDT_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR));
- *eof = 1;
- return len;
-}
-#endif
-
-static struct file_operations wdt_fops = {
- read: wdt_read,
- write: wdt_write,
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,36))
- unlocked_ioctl: wdt_ioctl,
-#else
- ioctl: wdt_ioctl,
-#endif
- open: wdt_open,
- release: wdt_release,
-};
-
-static int amazon_wdt_probe(struct platform_device *dev)
-{
- int result = result = register_chrdev(0, "watchdog", &wdt_fops);
-
- if (result < 0) {
- printk(KERN_INFO DRV_NAME "cannot register device\n");
- return result;
- }
-
-#ifdef AMAZON_WDT_DEBUG
- amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL);
- create_proc_read_entry("wdt_register", 0, amazon_wdt_dir,
- wdt_register_proc_read, NULL);
-#endif
-
- amazon_wdt_isopen=0;
- printk(KERN_INFO DRV_NAME "driver loaded but inactive\n");
- return 0;
-}
-
-static int amazon_wdt_remove(struct platform_device *dev)
-{
- unregister_chrdev(0, "watchdog");
-#ifdef AMAZON_WDT_DEBUG
- remove_proc_entry("wdt_register", amazon_wdt_dir);
- remove_proc_entry("amazon_wdt", NULL);
-#endif
- printk(KERN_INFO DRV_NAME "unregistered\n");
- return 0;
-}
-
-static struct platform_driver amazon_wdt_driver = {
- .probe = amazon_wdt_probe,
- .remove = amazon_wdt_remove,
- .driver = {
- .name = "amazon_wdt",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init amazon_wdt_init(void)
-{
- int ret = platform_driver_register(&amazon_wdt_driver);
- if (ret)
- printk(KERN_WARNING "amazon_wdt: error registering platfom driver!\n");
- return ret;
-}
-
-static void __exit amazon_wdt_exit(void)
-{
- platform_driver_unregister(&amazon_wdt_driver);
-}
-
-module_init(amazon_wdt_init);
-module_exit(amazon_wdt_exit);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR("Infineon / John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("AMAZON WDT driver");
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h
deleted file mode 100644
index 77cf4b131d..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h
+++ /dev/null
@@ -1,232 +0,0 @@
-/******************************************************************************
- Copyright (c) 2004, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
- ******************************************************************************
- Module : ifx_swdrv.h
- Date : 2004-09-01
- Description : JoeLin
- Remarks:
-
- *****************************************************************************/
-
-#ifndef _ADM_6996_MODULE_H_
-#define _ADM_6996_MODULE_H_
-
-#include <asm/amazon/amazon.h>
-
-#define ifx_printf(x) printk x
-
-/* command codes */
-#define ADM_SW_SMI_READ 0x02
-#define ADM_SW_SMI_WRITE 0x01
-#define ADM_SW_SMI_START 0x01
-
-#define ADM_SW_EEPROM_WRITE 0x01
-#define ADM_SW_EEPROM_WRITE_ENABLE 0x03
-#define ADM_SW_EEPROM_WRITE_DISABLE 0x00
-#define EEPROM_TYPE 8 /* for 93C66 */
-
-/* bit masks */
-#define ADM_SW_BIT_MASK_1 0x00000001
-#define ADM_SW_BIT_MASK_2 0x00000002
-#define ADM_SW_BIT_MASK_4 0x00000008
-#define ADM_SW_BIT_MASK_10 0x00000200
-#define ADM_SW_BIT_MASK_16 0x00008000
-#define ADM_SW_BIT_MASK_32 0x80000000
-
-/* delay timers */
-#define ADM_SW_MDC_DOWN_DELAY 5
-#define ADM_SW_MDC_UP_DELAY 5
-#define ADM_SW_CS_DELAY 5
-
-/* MDIO modes */
-#define ADM_SW_MDIO_OUTPUT 1
-#define ADM_SW_MDIO_INPUT 0
-
-#define ADM_SW_MAX_PORT_NUM 5
-#define ADM_SW_MAX_VLAN_NUM 15
-
-/* registers */
-#define ADM_SW_PORT0_CONF 0x1
-#define ADM_SW_PORT1_CONF 0x3
-#define ADM_SW_PORT2_CONF 0x5
-#define ADM_SW_PORT3_CONF 0x7
-#define ADM_SW_PORT4_CONF 0x8
-#define ADM_SW_PORT5_CONF 0x9
-#define ADM_SW_VLAN_MODE 0x11
-#define ADM_SW_MAC_LOCK 0x12
-#define ADM_SW_VLAN0_CONF 0x13
-#define ADM_SW_PORT0_PVID 0x28
-#define ADM_SW_PORT1_PVID 0x29
-#define ADM_SW_PORT2_PVID 0x2a
-#define ADM_SW_PORT34_PVID 0x2b
-#define ADM_SW_PORT5_PVID 0x2c
-#define ADM_SW_PHY_RESET 0x2f
-#define ADM_SW_MISC_CONF 0x30
-#define ADM_SW_BNDWDH_CTL0 0x31
-#define ADM_SW_BNDWDH_CTL1 0x32
-#define ADM_SW_BNDWDH_CTL_ENA 0x33
-
-/* port modes */
-#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */
-#define ADM_SW_PORT_AN 0x2 /* auto negotiation */
-#define ADM_SW_PORT_100M 0x4 /* 100M */
-#define ADM_SW_PORT_FULL 0x8 /* full duplex */
-#define ADM_SW_PORT_TAG 0x10 /* output tag on */
-#define ADM_SW_PORT_DISABLE 0x20 /* disable port */
-#define ADM_SW_PORT_TOS 0x40 /* TOS first */
-#define ADM_SW_PORT_PPRI 0x80 /* port based priority first */
-#define ADM_SW_PORT_MDIX 0x8000 /* auto MDIX on */
-#define ADM_SW_PORT_PVID_SHIFT 10
-#define ADM_SW_PORT_PVID_BITS 4
-
-/* VLAN */
-#define ADM_SW_VLAN_PORT0 0x1
-#define ADM_SW_VLAN_PORT1 0x2
-#define ADM_SW_VLAN_PORT2 0x10
-#define ADM_SW_VLAN_PORT3 0x40
-#define ADM_SW_VLAN_PORT4 0x80
-#define ADM_SW_VLAN_PORT5 0x100
-
-
-/* GPIO 012 enabled, output mode */
-#define GPIO_ENABLEBITS 0x000700f8
-
-/*
- define AMAZON GPIO port to ADM6996 EEPROM interface
- MDIO -> EEDI GPIO 16, AMAZON GPIO P1.0, bi-direction
- MDC -> EESK GPIO 17, AMAZON GPIO P1.1, output only
- MDCS -> EECS GPIO 18, AMAZON GPIO P1.2, output only
- EEDO GPIO 15, AMAZON GPIO P0.15, do not need this one! */
-
-#define GPIO_MDIO 1 //P1.0
-#define GPIO_MDC 2 //P1.1
-#define GPIO_MDCS 4 //P1.2
-
-//joelin #define GPIO_MDIO 0
-//joelin #define GPIO_MDC 5 /* PORT 0 GPIO5 */
-//joelin #define GPIO_MDCS 6 /* PORT 0 GPIO6 */
-
-
-#define MDIO_INPUT 0x00000001
-#define MDIO_OUTPUT_EN 0x00010000
-
-
-/* type definitions */
-typedef unsigned char U8;
-typedef unsigned short U16;
-typedef unsigned int U32;
-
-typedef struct _REGRW_
-{
- unsigned int addr;
- unsigned int value;
- unsigned int mode;
-}REGRW, *PREGRW;
-
-//joelin adm6996i
-typedef struct _MACENTRY_
-{
- unsigned char mac_addr[6];
- unsigned long fid:4;
- unsigned long portmap:6;
- union {
- unsigned long age_timer:9;
- unsigned long info_ctrl:9;
- } ctrl;
- unsigned long occupy:1;
- unsigned long info_type:1;
- unsigned long bad:1;
- unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found ,011:try next entry ,101:command error
-
- }MACENTRY, *PMACENTRY;
-typedef struct _PROTOCOLFILTER_
-{
- int protocol_filter_num;//[0~7]
- int ip_p; //Value Compared with Protocol in IP Heade[7:0]
- char action:2;//Action for protocol Filter .
-//00 = Protocol Portmap is Default Output Ports.
-//01 = Protocol Portmap is 6'b0.
-//10 = Protocol Portmap is the CPU port if the incoming port
-//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port.
- }PROTOCOLFILTER, *PPROTOCOLFILTER;
-
-//joelin adm6996i
-
-/* Santosh: for IGMP proxy/snooping */
-
-//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac);
-//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter);
-
-
-/* IOCTL keys */
-#define KEY_IOCTL_ADM_REGRW 0x01
-#define KEY_IOCTL_ADM_SW_REGRW 0x02
-#define KEY_IOCTL_ADM_SW_PORTSTS 0x03
-#define KEY_IOCTL_ADM_SW_INIT 0x04
-//for adm6996i-start
-#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD 0x05
-#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL 0x06
-#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT 0x07
-#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE 0x08
-#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD 0x09
-#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL 0x0a
-#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET 0x0b
-
-//adm6996i #define KEY_IOCTL_MAX_KEY 0x05
-#define KEY_IOCTL_MAX_KEY 0x0c
-//for adm6996i-end
-/* IOCTL MAGIC */
-#define ADM_MAGIC ('a'|'d'|'m'|'t'|'e'|'k')
-
-/* IOCTL parameters */
-#define ADM_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW)
-#define ADM_SW_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW)
-#define ADM_SW_IOCTL_PORTSTS _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL)
-#define ADM_SW_IOCTL_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL)
-
-
-//6996i-stat
-#define ADM_SW_IOCTL_MACENTRY_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_GET_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY)
-#define ADM_SW_IOCTL_MACENTRY_GET_MORE _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY)
-#define ADM_SW_IOCTL_FILTER_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER)
-#define ADM_SW_IOCTL_FILTER_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER)
-#define ADM_SW_IOCTL_FILTER_GET _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER)
-
-//6996i-end
-
-
-#define REG_READ 0x0
-#define REG_WRITE 0x1
-
-/* undefine symbol */
-#define AMAZON_SW_REG(reg) *((volatile U32*)(reg))
-//#define GPIO0_INPUT_MASK 0
-//#define GPIO_conf0_REG 0x12345678
-//#define GPIO_SET_HI
-//#define GPIO_SET_LOW
-
-#endif
-/* _ADM_6996_MODULE_H_ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h
deleted file mode 100644
index 28af7f59d2..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h
+++ /dev/null
@@ -1,1447 +0,0 @@
-#ifndef AMAZON_H
-#define AMAZON_H
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-#define amazon_readl(a) __raw_readl(((u32*)(a)))
-#define amazon_writel(a,b) __raw_writel(a, ((u32*)(b)))
-#define amazon_writel_masked(a,b,c) __raw_writel((__raw_readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a)))
-
-unsigned int amazon_get_fpi_hz(void);
-
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
-
-/* check ADSL link status */
-#define AMAZON_CHECK_LINK
-
-/***********************************************************************/
-/* Module : WDT register address and bits */
-/***********************************************************************/
-
-#define AMAZON_WDT (KSEG1+0x10100900)
-/***********************************************************************/
-
-/***Reset Request Register***/
-#define AMAZON_RST_REQ ((volatile u32*)(AMAZON_WDT+ 0x0010))
-#define AMAZON_RST_REQ_PLL (1 << 31)
-#define AMAZON_RST_REQ_PCI_CORE (1 << 13)
-#define AMAZON_RST_REQ_TPE (1 << 12)
-#define AMAZON_RST_REQ_AFE (1 << 11)
-#define AMAZON_RST_REQ_DMA (1 << 9)
-#define AMAZON_RST_REQ_SWITCH (1 << 8)
-#define AMAZON_RST_REQ_DFE (1 << 7)
-#define AMAZON_RST_REQ_PHY (1 << 5)
-#define AMAZON_RST_REQ_PCI (1 << 4)
-#define AMAZON_RST_REQ_FPI (1 << 2)
-#define AMAZON_RST_REQ_CPU (1 << 1)
-#define AMAZON_RST_REQ_HRST (1 << 0)
-#define AMAZON_RST_ALL (AMAZON_RST_REQ_PLL \
- |AMAZON_RST_REQ_PCI_CORE \
- |AMAZON_RST_REQ_TPE \
- |AMAZON_RST_REQ_AFE \
- |AMAZON_RST_REQ_DMA \
- |AMAZON_RST_REQ_SWITCH \
- |AMAZON_RST_REQ_DFE \
- |AMAZON_RST_REQ_PHY \
- |AMAZON_RST_REQ_PCI \
- |AMAZON_RST_REQ_FPI \
- |AMAZON_RST_REQ_CPU \
- |AMAZON_RST_REQ_HRST)
-
-/***Reset Status Register Power On***/
-#define AMAZON_RST_SR ((volatile u32*)(AMAZON_WDT+ 0x0014))
-
-/***Watchdog Timer Control Register 0***/
-#define AMAZON_WDT_CON0 ((volatile u32*)(AMAZON_WDT+ 0x0020))
-
-/***Watchdog Timer Control Register 1***/
-#define AMAZON_WDT_CON1 ((volatile u32*)(AMAZON_WDT+ 0x0024))
-#define AMAZON_WDT_CON1_WDTDR (1 << 3)
-#define AMAZON_WDT_CON1_WDTIR (1 << 2)
-
-/***Watchdog Timer Status Register***/
-#define AMAZON_WDT_SR ((volatile u32*)(AMAZON_WDT+ 0x0028))
-#define AMAZON_WDT_SR_WDTTIM(value) (((( 1 << 16) - 1) & (value)) << 16)
-#define AMAZON_WDT_SR_WDTPR (1 << 5)
-#define AMAZON_WDT_SR_WDTTO (1 << 4)
-#define AMAZON_WDT_SR_WDTDS (1 << 3)
-#define AMAZON_WDT_SR_WDTIS (1 << 2)
-#define AMAZON_WDT_SR_WDTOE (1 << 1)
-#define AMAZON_WDT_SR_WDTAE (1 << 0)
-
-/***NMI Status Register***/
-#define AMAZON_WDT_NMISR ((volatile u32*)(AMAZON_WDT+ 0x002C))
-#define AMAZON_WDT_NMISR_NMIWDT (1 << 2)
-#define AMAZON_WDT_NMISR_NMIPLL (1 << 1)
-#define AMAZON_WDT_NMISR_NMIEXT (1 << 0)
-
-#define AMAZON_WDT_RST_MON ((volatile u32*)(AMAZON_WDT+ 0x0030))
-
-/***********************************************************************/
-/* Module : MCD register address and bits */
-/***********************************************************************/
-#define AMAZON_MCD (KSEG1+0x1F106000)
-
-/***Manufacturer Identification Register***/
-#define AMAZON_MCD_MANID ((volatile u32*)(AMAZON_MCD+ 0x0024))
-#define AMAZON_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5)
-
-/***Chip Identification Register***/
-#define AMAZON_MCD_CHIPID ((volatile u32*)(AMAZON_MCD+ 0x0028))
-#define AMAZON_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define AMAZON_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define AMAZON_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1))
-#define AMAZON_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1)
-
-#define AMAZON_CHIPID_STANDARD 0x00EB
-#define AMAZON_CHIPID_YANGTSE 0x00ED
-
-/***Redesign Tracing Identification Register***/
-#define AMAZON_MCD_RTID ((volatile u32*)(AMAZON_MCD+ 0x002C))
-#define AMAZON_MCD_RTID_LC (1 << 15)
-#define AMAZON_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : CGU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_CGU (KSEG1+0x1F103000)
-/***********************************************************************/
-
-/***CGU Clock Divider Select Register***/
-#define AMAZON_CGU_DIV (AMAZON_CGU + 0x0000)
-/***CGU PLL0 Status Register***/
-#define AMAZON_CGU_PLL0SR (AMAZON_CGU + 0x0004)
-/***CGU PLL1 Status Register***/
-#define AMAZON_CGU_PLL1SR (AMAZON_CGU + 0x0008)
-/***CGU Interface Clock Control Register***/
-#define AMAZON_CGU_IFCCR (AMAZON_CGU + 0x000c)
-/***CGU Oscillator Control Register***/
-#define AMAZON_CGU_OSCCR (AMAZON_CGU + 0x0010)
-/***CGU Memory Clock Delay Register***/
-#define AMAZON_CGU_MCDEL (AMAZON_CGU + 0x0014)
-/***CGU CPU Clock Reduction Register***/
-#define AMAZON_CGU_CPUCRD (AMAZON_CGU + 0x0018)
-/***CGU Test Register**/
-#define AMAZON_CGU_TST (AMAZON_CGU + 0x003c)
-
-/***********************************************************************/
-/* Module : PMU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_PMU AMAZON_CGU
-/***********************************************************************/
-
-
-/***PMU Power Down Control Register***/
-#define AMAZON_PMU_PWDCR ((volatile u32*)(AMAZON_PMU+ 0x001c))
-#define AMAZON_PMU_PWDCR_TPE (1 << 13)
-#define AMAZON_PMU_PWDCR_PLL (1 << 12)
-#define AMAZON_PMU_PWDCR_XTAL (1 << 11)
-#define AMAZON_PMU_PWDCR_EBU (1 << 10)
-#define AMAZON_PMU_PWDCR_DFE (1 << 9)
-#define AMAZON_PMU_PWDCR_SPI (1 << 8)
-#define AMAZON_PMU_PWDCR_UART (1 << 7)
-#define AMAZON_PMU_PWDCR_GPT (1 << 6)
-#define AMAZON_PMU_PWDCR_DMA (1 << 5)
-#define AMAZON_PMU_PWDCR_PCI (1 << 4)
-#define AMAZON_PMU_PWDCR_SW (1 << 3)
-#define AMAZON_PMU_PWDCR_IOR (1 << 2)
-#define AMAZON_PMU_PWDCR_FPI (1 << 1)
-#define AMAZON_PMU_PWDCR_EPHY (1 << 0)
-
-/***PMU Status Register***/
-#define AMAZON_PMU_SR ((volatile u32*)(AMAZON_PMU+ 0x0020))
-#define AMAZON_PMU_SR_TPE (1 << 13)
-#define AMAZON_PMU_SR_PLL (1 << 12)
-#define AMAZON_PMU_SR_XTAL (1 << 11)
-#define AMAZON_PMU_SR_EBU (1 << 10)
-#define AMAZON_PMU_SR_DFE (1 << 9)
-#define AMAZON_PMU_SR_SPI (1 << 8)
-#define AMAZON_PMU_SR_UART (1 << 7)
-#define AMAZON_PMU_SR_GPT (1 << 6)
-#define AMAZON_PMU_SR_DMA (1 << 5)
-#define AMAZON_PMU_SR_PCI (1 << 4)
-#define AMAZON_PMU_SR_SW (1 << 3)
-#define AMAZON_PMU_SR_IOR (1 << 2)
-#define AMAZON_PMU_SR_FPI (1 << 1)
-#define AMAZON_PMU_SR_EPHY (1 << 0)
-
-/***********************************************************************/
-/* Module : BCU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_BCU (KSEG1+0x10100000)
-/***********************************************************************/
-
-
-/***BCU Control Register (0010H)***/
-#define AMAZON_BCU_CON ((volatile u32*)(AMAZON_BCU+ 0x0010))
-#define AMAZON_BCU_CON_SPC(value) (((( 1 << 8) - 1) & (value)) << 24)
-#define AMAZON_BCU_CON_SPE (1 << 19)
-#define AMAZON_BCU_CON_PSE (1 << 18)
-#define AMAZON_BCU_CON_DBG (1 << 16)
-#define AMAZON_BCU_CON_TOUT(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***BCU Error Control Capture Register (0020H)***/
-#define AMAZON_BCU_ECON ((volatile u32*)(AMAZON_BCU+ 0x0020))
-#define AMAZON_BCU_ECON_TAG(value) (((( 1 << 4) - 1) & (value)) << 24)
-#define AMAZON_BCU_ECON_RDN (1 << 23)
-#define AMAZON_BCU_ECON_WRN (1 << 22)
-#define AMAZON_BCU_ECON_SVM (1 << 21)
-#define AMAZON_BCU_ECON_ACK(value) (((( 1 << 2) - 1) & (value)) << 19)
-#define AMAZON_BCU_ECON_ABT (1 << 18)
-#define AMAZON_BCU_ECON_RDY (1 << 17)
-#define AMAZON_BCU_ECON_TOUT (1 << 16)
-#define AMAZON_BCU_ECON_ERRCNT(value) (((( 1 << 16) - 1) & (value)) << 0)
-#define AMAZON_BCU_ECON_OPC(value) (((( 1 << 4) - 1) & (value)) << 28)
-
-/***BCU Error Address Capture Register (0024 H)***/
-#define AMAZON_BCU_EADD ((volatile u32*)(AMAZON_BCU+ 0x0024))
-#define AMAZON_BCU_EADD_FPIADR
-
-/***BCU Error Data Capture Register (0028H)***/
-#define AMAZON_BCU_EDAT ((volatile u32*)(AMAZON_BCU+ 0x0028))
-#define AMAZON_BCU_EDAT_FPIDAT
-
-/***********************************************************************/
-/* Module : Switch register address and bits */
-/***********************************************************************/
-
-#define AMAZON_SWITCH (KSEG1+0x10106000)
-/***********************************************************************/
-#define AMAZON_SW_UN_DEST AMAZON_SWITCH+0x00 /*Unknown destination register*/
-#define AMAZON_SW_VLAN_CTRL AMAZON_SWITCH+0x04 /*VLAN control register*/
-#define AMAZON_SW_PS_CTL AMAZON_SWITCH+0x08 /*port status control register*/
-#define AMAZON_SW_COS_CTL AMAZON_SWITCH+0x0c /*Cos control register*/
-#define AMAZON_SW_VLAN_COS AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/
-#define AMAZON_SW_DSCP_COS3 AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/
-#define AMAZON_SW_DSCP_COS2 AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/
-#define AMAZON_SW_DSCP_COS1 AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/
-#define AMAZON_SW_DSCP_COS0 AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/
-#define AMAZON_SW_ARL_CTL AMAZON_SWITCH+0x24 /*ARL control register*/
-#define AMAZON_SW_PKT_LEN AMAZON_SWITCH+0x28 /*packet length register*/
-#define AMAZON_SW_CPU_ACTL AMAZON_SWITCH+0x2c /*CPU control register1*/
-#define AMAZON_SW_DATA1 AMAZON_SWITCH+0x30 /*CPU access control register1*/
-#define AMAZON_SW_DATA2 AMAZON_SWITCH+0x34 /*CPU access control register2*/
-#define AMAZON_SW_P2_PCTL AMAZON_SWITCH+0x38 /*Port2 control register*/
-#define AMAZON_SW_P0_TX_CTL AMAZON_SWITCH+0x3c /*port0 TX control register*/
-#define AMAZON_SW_P1_TX_CTL AMAZON_SWITCH+0x40 /*port 1 TX control register*/
-#define AMAZON_SW_P0_WM AMAZON_SWITCH+0x44 /*port 0 watermark control register*/
-#define AMAZON_SW_P1_WM AMAZON_SWITCH+0x48 /*port 1 watermark control register*/
-#define AMAZON_SW_P2_WM AMAZON_SWITCH+0x4c /*port 2 watermark control register*/
-#define AMAZON_SW_GBL_WM AMAZON_SWITCH+0x50 /*Global watermark register*/
-#define AMAZON_SW_PM_CTL AMAZON_SWITCH+0x54 /*PM control register*/
-#define AMAZON_SW_P2_CTL AMAZON_SWITCH+0x58 /*PMAC control register*/
-#define AMAZON_SW_P2_TX_IPG AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/
-#define AMAZON_SW_P2_RX_IPG AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/
-#define AMAZON_SW_MDIO_ACC AMAZON_SWITCH+0x64 /*MDIO access register*/
-#define AMAZON_SW_EPHY AMAZON_SWITCH+0x68 /*Ethernet PHY register*/
-#define AMAZON_SW_MDIO_CFG AMAZON_SWITCH+0x6c /*MDIO configuration register*/
-#define AMAZON_SW_P0_RCV_DROP_CNT AMAZON_SWITCH+0x70 /*port0 receive drop counter */
-#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/
-#define AMAZON_SW_P0_TX_COLL_CNT AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/
-#define AMAZON_SW_P0_TX_DROP_CNT AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/
-#define AMAZON_SW_P1_RCV_DROP_CNT AMAZON_SWITCH+0x80 /*port1 receive drop counter*/
-#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x84 /*port1 receive error counter*/
-#define AMAZON_SW_P1_TX_COLL_CNT AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/
-#define AMAZON_SW_P1_TX_DROP_CNT AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/
-
-
-
-/***********************************************************************/
-/* Module : SSC register address and bits */
-/***********************************************************************/
-#define AMAZON_SSC_BASE_ADD_0 (KSEG1+0x10100800)
-
-/*165001:henryhsu:20050603:Source add by Bing Tao*/
-
-/*configuration/Status Registers in Bus Clock Domain*/
-#define AMAZON_SSC_CLC ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000))
-#define AMAZON_SSC_ID ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008))
-#define AMAZON_SSC_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010))
-#define AMAZON_SSC_STATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014))
-#define AMAZON_SSC_WHBSTATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018))
-#define AMAZON_SSC_TB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020))
-#define AMAZON_SSC_RB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024))
-#define AMAZON_SSC_FSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038))
-
-/*Configuration/Status Registers in Kernel Clock Domain*/
-#define AMAZON_SSC_PISEL ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004))
-#define AMAZON_SSC_RXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030))
-#define AMAZON_SSC_TXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034))
-#define AMAZON_SSC_BR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040))
-#define AMAZON_SSC_BRSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044))
-#define AMAZON_SSC_SFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060))
-#define AMAZON_SSC_SFSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064))
-#define AMAZON_SSC_GPOCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070))
-#define AMAZON_SSC_GPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074))
-#define AMAZON_SSC_WHBGPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078))
-#define AMAZON_SSC_RXREQ ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080))
-#define AMAZON_SSC_RXCNT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084))
-
-/*DMA Registers in Bus Clock Domain*/
-#define AMAZON_SSC_DMA_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec))
-
-/*interrupt Node Registers in Bus Clock Domain*/
-#define AMAZON_SSC_IRNEN ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4))
-#define AMAZON_SSC_IRNICR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC))
-#define AMAZON_SSC_IRNCR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8))
-
-/*165001*/
-
-/***********************************************************************/
-
-
-
-/***********************************************************************/
-/* Module : EBU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_EBU (KSEG1+0x10105300)
-/***********************************************************************/
-
-
-/***EBU Clock Control Register***/
-#define AMAZON_EBU_CLC ((volatile u32*)(AMAZON_EBU+ 0x0000))
-#define AMAZON_EBU_CLC_DISS (1 << 1)
-#define AMAZON_EBU_CLC_DISR (1 << 0)
-
-/***EBU Global Control Register***/
-#define AMAZON_EBU_CON ((volatile u32*)(AMAZON_EBU+ 0x0010))
-#define AMAZON_EBU_CON_DTACS(value) (((( 1 << 3) - 1) & (value)) << 20)
-#define AMAZON_EBU_CON_DTARW(value) (((( 1 << 3) - 1) & (value)) << 16)
-#define AMAZON_EBU_CON_TOUTC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_EBU_CON_ARBMODE(value) (((( 1 << 2) - 1) & (value)) << 6)
-#define AMAZON_EBU_CON_ARBSYNC (1 << 5)
-#define AMAZON_EBU_CON_1 (1 << 3)
-
-/***EBU Address Select Register 0***/
-#define AMAZON_EBU_ADDSEL0 ((volatile u32*)(AMAZON_EBU+ 0x0020))
-#define AMAZON_EBU_ADDSEL0_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL0_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL0_MIRRORE (1 << 1)
-#define AMAZON_EBU_ADDSEL0_REGEN (1 << 0)
-
-/***EBU Address Select Register 1***/
-#define AMAZON_EBU_ADDSEL1 ((volatile u32*)(AMAZON_EBU+ 0x0024))
-#define AMAZON_EBU_ADDSEL1_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL1_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL1_MIRRORE (1 << 1)
-#define AMAZON_EBU_ADDSEL1_REGEN (1 << 0)
-
-/***EBU Address Select Register 2***/
-#define AMAZON_EBU_ADDSEL2 ((volatile u32*)(AMAZON_EBU+ 0x0028))
-#define AMAZON_EBU_ADDSEL2_BASE(value) (((( 1 << 20) - 1) & (value)) << 12)
-#define AMAZON_EBU_ADDSEL2_MASK(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_EBU_ADDSEL2_MIRRORE (1 << 1)
-#define AMAZON_EBU_ADDSEL2_REGEN (1 << 0)
-
-/***EBU Bus Configuration Register 0***/
-#define AMAZON_EBU_BUSCON0 ((volatile u32*)(AMAZON_EBU+ 0x0060))
-#define AMAZON_EBU_BUSCON0_WRDIS (1 << 31)
-#define AMAZON_EBU_BUSCON0_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON0_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON0_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON0_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON0_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON0_WAITINV (1 << 19)
-#define AMAZON_EBU_BUSCON0_SETUP (1 << 18)
-#define AMAZON_EBU_BUSCON0_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON0_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON0_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON0_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON0_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON0_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 1***/
-#define AMAZON_EBU_BUSCON1 ((volatile u32*)(AMAZON_EBU+ 0x0064))
-#define AMAZON_EBU_BUSCON1_WRDIS (1 << 31)
-#define AMAZON_EBU_BUSCON1_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON1_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON1_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON1_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON1_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON1_WAITINV (1 << 19)
-#define AMAZON_EBU_BUSCON1_SETUP (1 << 18)
-#define AMAZON_EBU_BUSCON1_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON1_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON1_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON1_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON1_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON1_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 2***/
-#define AMAZON_EBU_BUSCON2 ((volatile u32*)(AMAZON_EBU+ 0x0068))
-#define AMAZON_EBU_BUSCON2_WRDIS (1 << 31)
-#define AMAZON_EBU_BUSCON2_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29)
-#define AMAZON_EBU_BUSCON2_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27)
-#define AMAZON_EBU_BUSCON2_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define AMAZON_EBU_BUSCON2_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22)
-#define AMAZON_EBU_BUSCON2_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20)
-#define AMAZON_EBU_BUSCON2_WAITINV (1 << 19)
-#define AMAZON_EBU_BUSCON2_SETUP (1 << 18)
-#define AMAZON_EBU_BUSCON2_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16)
-#define AMAZON_EBU_BUSCON2_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9)
-#define AMAZON_EBU_BUSCON2_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6)
-#define AMAZON_EBU_BUSCON2_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4)
-#define AMAZON_EBU_BUSCON2_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2)
-#define AMAZON_EBU_BUSCON2_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : SDRAM register address and bits */
-/***********************************************************************/
-
-#define AMAZON_SDRAM (KSEG1+0x1F800000)
-/***********************************************************************/
-
-
-/***MC Access Error Cause Register***/
-#define AMAZON_SDRAM_MC_ERRCAUSE ((volatile u32*)(AMAZON_SDRAM+ 0x0010))
-#define AMAZON_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
-#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value) (((( 1 << NaN) - 1) & (value)) << NaN)
-
-/***MC Access Error Address Register***/
-#define AMAZON_SDRAM_MC_ERRADDR ((volatile u32*)(AMAZON_SDRAM+ 0x0020))
-#define AMAZON_SDRAM_MC_ERRADDR_ADDR
-
-/***MC I/O General Purpose Register***/
-#define AMAZON_SDRAM_MC_IOGP ((volatile u32*)(AMAZON_SDRAM+ 0x0100))
-#define AMAZON_SDRAM_MC_IOGP_GPR6(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define AMAZON_SDRAM_MC_IOGP_GPR5(value) (((( 1 << 4) - 1) & (value)) << 24)
-#define AMAZON_SDRAM_MC_IOGP_GPR4(value) (((( 1 << 4) - 1) & (value)) << 20)
-#define AMAZON_SDRAM_MC_IOGP_GPR3(value) (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_IOGP_GPR2(value) (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_IOGP_CPS (1 << 11)
-#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value) (((( 1 << 3) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_IOGP_RDDEL(value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***MC Self Refresh Register***/
-#define AMAZON_SDRAM_MC_SELFRFSH ((volatile u32*)(AMAZON_SDRAM+ 0x01A0))
-#define AMAZON_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
-#define AMAZON_SDRAM_MC_SELFRFSH_PWD (1 << 0)
-#define AMAZON_SDRAM_MC_SELFRFSH_Res(value) (((( 1 << 30) - 1) & (value)) << 2)
-
-/***MC Enable Register***/
-#define AMAZON_SDRAM_MC_CTRLENA ((volatile u32*)(AMAZON_SDRAM+ 0x0110))
-#define AMAZON_SDRAM_MC_CTRLENA_ENA (1 << 0)
-#define AMAZON_SDRAM_MC_CTRLENA_Res(value) (((( 1 << 31) - 1) & (value)) << 1)
-
-/***MC Mode Register Setup Code***/
-#define AMAZON_SDRAM_MC_MRSCODE ((volatile u32*)(AMAZON_SDRAM+ 0x0120))
-#define AMAZON_SDRAM_MC_MRSCODE_UMC(value) (((( 1 << 5) - 1) & (value)) << 7)
-#define AMAZON_SDRAM_MC_MRSCODE_CL(value) (((( 1 << 3) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_MRSCODE_WT (1 << 3)
-#define AMAZON_SDRAM_MC_MRSCODE_BL(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***MC Configuration Data-word Width Register***/
-#define AMAZON_SDRAM_MC_CFGDW ((volatile u32*)(AMAZON_SDRAM+ 0x0130))
-#define AMAZON_SDRAM_MC_CFGDW_DW(value) (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_CFGDW_Res(value) (((( 1 << 28) - 1) & (value)) << 4)
-
-/***MC Configuration Physical Bank 0 Register***/
-#define AMAZON_SDRAM_MC_CFGPB0 ((volatile u32*)(AMAZON_SDRAM+ 0x140))
-#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value) (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value) (((( 1 << 4) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value) (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_CFGPB0_Res(value) (((( 1 << 16) - 1) & (value)) << 16)
-
-/***MC Latency Register***/
-#define AMAZON_SDRAM_MC_LATENCY ((volatile u32*)(AMAZON_SDRAM+ 0x0180))
-#define AMAZON_SDRAM_MC_LATENCY_TRP(value) (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_SDRAM_MC_LATENCY_TRAS(value) (((( 1 << 4) - 1) & (value)) << 12)
-#define AMAZON_SDRAM_MC_LATENCY_TRCD(value) (((( 1 << 4) - 1) & (value)) << 8)
-#define AMAZON_SDRAM_MC_LATENCY_TDPL(value) (((( 1 << 4) - 1) & (value)) << 4)
-#define AMAZON_SDRAM_MC_LATENCY_TDAL(value) (((( 1 << 4) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_LATENCY_Res(value) (((( 1 << 12) - 1) & (value)) << 20)
-
-/***MC Refresh Cycle Time Register***/
-#define AMAZON_SDRAM_MC_TREFRESH ((volatile u32*)(AMAZON_SDRAM+ 0x0190))
-#define AMAZON_SDRAM_MC_TREFRESH_TREF(value) (((( 1 << 13) - 1) & (value)) << 0)
-#define AMAZON_SDRAM_MC_TREFRESH_Res(value) (((( 1 << 19) - 1) & (value)) << 13)
-
-/***********************************************************************/
-/* Module : GPTU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_GPTU (KSEG1+0x10100A00)
-/***********************************************************************/
-
-
-/***GPT Clock Control Register***/
-#define AMAZON_GPTU_CLC ((volatile u32*)(AMAZON_GPTU+ 0x0000))
-#define AMAZON_GPTU_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_GPTU_CLC_DISS (1 << 1)
-#define AMAZON_GPTU_CLC_DISR (1 << 0)
-
-/***GPT Timer 3 Control Register***/
-#define AMAZON_GPTU_T3CON ((volatile u32*)(AMAZON_GPTU+ 0x0014))
-#define AMAZON_GPTU_T3CON_T3RDIR (1 << 15)
-#define AMAZON_GPTU_T3CON_T3CHDIR (1 << 14)
-#define AMAZON_GPTU_T3CON_T3EDGE (1 << 13)
-#define AMAZON_GPTU_T3CON_BPS1(value) (((( 1 << 2) - 1) & (value)) << 11)
-#define AMAZON_GPTU_T3CON_T3OTL (1 << 10)
-#define AMAZON_GPTU_T3CON_T3UD (1 << 7)
-#define AMAZON_GPTU_T3CON_T3R (1 << 6)
-#define AMAZON_GPTU_T3CON_T3M(value) (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T3CON_T3I(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write Hardware Modified Timer 3 Control Register
-If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT3CON ((volatile u32*)(AMAZON_GPTU+ 0x004C))
-#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR (1 << 15)
-#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR (1 << 14)
-#define AMAZON_GPTU_WHBT3CON_SETT3EDGE (1 << 13)
-#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE (1 << 12)
-#define AMAZON_GPTU_WHBT3CON_SETT3OTL (1 << 11)
-#define AMAZON_GPTU_WHBT3CON_CLRT3OTL (1 << 10)
-
-/***GPT Timer 2 Control Register***/
-#define AMAZON_GPTU_T2CON ((volatile u32*)(AMAZON_GPTU+ 0x0010))
-#define AMAZON_GPTU_T2CON_TxRDIR (1 << 15)
-#define AMAZON_GPTU_T2CON_TxCHDIR (1 << 14)
-#define AMAZON_GPTU_T2CON_TxEDGE (1 << 13)
-#define AMAZON_GPTU_T2CON_TxIRDIS (1 << 12)
-#define AMAZON_GPTU_T2CON_TxRC (1 << 9)
-#define AMAZON_GPTU_T2CON_TxUD (1 << 7)
-#define AMAZON_GPTU_T2CON_TxR (1 << 6)
-#define AMAZON_GPTU_T2CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T2CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Control Register***/
-#define AMAZON_GPTU_T4CON ((volatile u32*)(AMAZON_GPTU+ 0x0018))
-#define AMAZON_GPTU_T4CON_TxRDIR (1 << 15)
-#define AMAZON_GPTU_T4CON_TxCHDIR (1 << 14)
-#define AMAZON_GPTU_T4CON_TxEDGE (1 << 13)
-#define AMAZON_GPTU_T4CON_TxIRDIS (1 << 12)
-#define AMAZON_GPTU_T4CON_TxRC (1 << 9)
-#define AMAZON_GPTU_T4CON_TxUD (1 << 7)
-#define AMAZON_GPTU_T4CON_TxR (1 << 6)
-#define AMAZON_GPTU_T4CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T4CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 2 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT2CON ((volatile u32*)(AMAZON_GPTU+ 0x0048))
-#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR (1 << 15)
-#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR (1 << 14)
-#define AMAZON_GPTU_WHBT2CON_SETTxEDGE (1 << 13)
-#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE (1 << 12)
-
-/***GPT Write HW Modified Timer 4 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT4CON ((volatile u32*)(AMAZON_GPTU+ 0x0050))
-#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR (1 << 15)
-#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR (1 << 14)
-#define AMAZON_GPTU_WHBT4CON_SETTxEDGE (1 << 13)
-#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE (1 << 12)
-
-/***GPT Capture Reload Register***/
-#define AMAZON_GPTU_CAPREL ((volatile u32*)(AMAZON_GPTU+ 0x0030))
-#define AMAZON_GPTU_CAPREL_CAPREL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 2 Register***/
-#define AMAZON_GPTU_T2 ((volatile u32*)(AMAZON_GPTU+ 0x0034))
-#define AMAZON_GPTU_T2_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 3 Register***/
-#define AMAZON_GPTU_T3 ((volatile u32*)(AMAZON_GPTU+ 0x0038))
-#define AMAZON_GPTU_T3_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Register***/
-#define AMAZON_GPTU_T4 ((volatile u32*)(AMAZON_GPTU+ 0x003C))
-#define AMAZON_GPTU_T4_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 5 Register***/
-#define AMAZON_GPTU_T5 ((volatile u32*)(AMAZON_GPTU+ 0x0040))
-#define AMAZON_GPTU_T5_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Register***/
-#define AMAZON_GPTU_T6 ((volatile u32*)(AMAZON_GPTU+ 0x0044))
-#define AMAZON_GPTU_T6_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Control Register***/
-#define AMAZON_GPTU_T6CON ((volatile u32*)(AMAZON_GPTU+ 0x0020))
-#define AMAZON_GPTU_T6CON_T6SR (1 << 15)
-#define AMAZON_GPTU_T6CON_T6CLR (1 << 14)
-#define AMAZON_GPTU_T6CON_BPS2(value) (((( 1 << 2) - 1) & (value)) << 11)
-#define AMAZON_GPTU_T6CON_T6OTL (1 << 10)
-#define AMAZON_GPTU_T6CON_T6UD (1 << 7)
-#define AMAZON_GPTU_T6CON_T6R (1 << 6)
-#define AMAZON_GPTU_T6CON_T6M(value) (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T6CON_T6I(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 6 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define AMAZON_GPTU_WHBT6CON ((volatile u32*)(AMAZON_GPTU+ 0x0054))
-#define AMAZON_GPTU_WHBT6CON_SETT6OTL (1 << 11)
-#define AMAZON_GPTU_WHBT6CON_CLRT6OTL (1 << 10)
-
-/***GPT Timer 5 Control Register***/
-#define AMAZON_GPTU_T5CON ((volatile u32*)(AMAZON_GPTU+ 0x001C))
-#define AMAZON_GPTU_T5CON_T5SC (1 << 15)
-#define AMAZON_GPTU_T5CON_T5CLR (1 << 14)
-#define AMAZON_GPTU_T5CON_CI(value) (((( 1 << 2) - 1) & (value)) << 12)
-#define AMAZON_GPTU_T5CON_T5CC (1 << 11)
-#define AMAZON_GPTU_T5CON_CT3 (1 << 10)
-#define AMAZON_GPTU_T5CON_T5RC (1 << 9)
-#define AMAZON_GPTU_T5CON_T5UDE (1 << 8)
-#define AMAZON_GPTU_T5CON_T5UD (1 << 7)
-#define AMAZON_GPTU_T5CON_T5R (1 << 6)
-#define AMAZON_GPTU_T5CON_T5M(value) (((( 1 << 3) - 1) & (value)) << 3)
-#define AMAZON_GPTU_T5CON_T5I(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : ASC register address and bits */
-/***********************************************************************/
-
-#define AMAZON_ASC (KSEG1+0x10100400)
-/***********************************************************************/
-
-
-/***ASC Port Input Select Register***/
-#define AMAZON_ASC_PISEL (AMAZON_ASC+ 0x0004)
-#define AMAZON_ASC_PISEL_RIS (1 << 0)
-
-/***ASC Control Register***/
-#define AMAZON_ASC_CON (AMAZON_ASC+ 0x0010)
-#define AMAZON_ASC_CON_R (1 << 15)
-#define AMAZON_ASC_CON_LB (1 << 14)
-#define AMAZON_ASC_CON_BRS (1 << 13)
-#define AMAZON_ASC_CON_ODD (1 << 12)
-#define AMAZON_ASC_CON_FDE (1 << 11)
-#define AMAZON_ASC_CON_OE (1 << 10)
-#define AMAZON_ASC_CON_FE (1 << 9)
-#define AMAZON_ASC_CON_PE (1 << 8)
-#define AMAZON_ASC_CON_OEN (1 << 7)
-#define AMAZON_ASC_CON_FEN (1 << 6)
-#define AMAZON_ASC_CON_PENRXDI (1 << 5)
-#define AMAZON_ASC_CON_REN (1 << 4)
-#define AMAZON_ASC_CON_STP (1 << 3)
-#define AMAZON_ASC_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***ASC Write Hardware Modified Control Register***/
-#define AMAZON_ASC_WHBCON (AMAZON_ASC+ 0x0050)
-#define AMAZON_ASC_WHBCON_SETOE (1 << 13)
-#define AMAZON_ASC_WHBCON_SETFE (1 << 12)
-#define AMAZON_ASC_WHBCON_SETPE (1 << 11)
-#define AMAZON_ASC_WHBCON_CLROE (1 << 10)
-#define AMAZON_ASC_WHBCON_CLRFE (1 << 9)
-#define AMAZON_ASC_WHBCON_CLRPE (1 << 8)
-#define AMAZON_ASC_WHBCON_SETREN (1 << 5)
-#define AMAZON_ASC_WHBCON_CLRREN (1 << 4)
-
-/***ASC Baudrate Timer/Reload Register***/
-#define AMAZON_ASC_BTR (AMAZON_ASC+ 0x0014)
-#define AMAZON_ASC_BTR_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0)
-
-/***ASC Fractional Divider Register***/
-#define AMAZON_ASC_FDV (AMAZON_ASC+ 0x0018)
-#define AMAZON_ASC_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC IrDA Pulse Mode/Width Register***/
-#define AMAZON_ASC_PMW (AMAZON_ASC+ 0x001C)
-#define AMAZON_ASC_PMW_IRPW (1 << 8)
-#define AMAZON_ASC_PMW_PW_VALUE(value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***ASC Transmit Buffer Register***/
-#define AMAZON_ASC_TBUF (AMAZON_ASC+ 0x0020)
-#define AMAZON_ASC_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Receive Buffer Register***/
-#define AMAZON_ASC_RBUF (AMAZON_ASC+ 0x0024)
-#define AMAZON_ASC_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Autobaud Control Register***/
-#define AMAZON_ASC_ABCON (AMAZON_ASC+ 0x0030)
-#define AMAZON_ASC_ABCON_RXINV (1 << 11)
-#define AMAZON_ASC_ABCON_TXINV (1 << 10)
-#define AMAZON_ASC_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8)
-#define AMAZON_ASC_ABCON_FCDETEN (1 << 4)
-#define AMAZON_ASC_ABCON_ABDETEN (1 << 3)
-#define AMAZON_ASC_ABCON_ABSTEN (1 << 2)
-#define AMAZON_ASC_ABCON_AUREN (1 << 1)
-#define AMAZON_ASC_ABCON_ABEN (1 << 0)
-
-/***Receive FIFO Control Register***/
-#define AMAZON_ASC_RXFCON (AMAZON_ASC+ 0x0040)
-#define AMAZON_ASC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_RXFCON_RXTMEN (1 << 2)
-#define AMAZON_ASC_RXFCON_RXFFLU (1 << 1)
-#define AMAZON_ASC_RXFCON_RXFEN (1 << 0)
-
-/***Transmit FIFO Control Register***/
-#define AMAZON_ASC_TXFCON (AMAZON_ASC+ 0x0044)
-#define AMAZON_ASC_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_TXFCON_TXTMEN (1 << 2)
-#define AMAZON_ASC_TXFCON_TXFFLU (1 << 1)
-#define AMAZON_ASC_TXFCON_TXFEN (1 << 0)
-
-/***FIFO Status Register***/
-#define AMAZON_ASC_FSTAT (AMAZON_ASC+ 0x0048)
-#define AMAZON_ASC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define AMAZON_ASC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***ASC Write HW Modified Autobaud Control Register***/
-#define AMAZON_ASC_WHBABCON (AMAZON_ASC+ 0x0054)
-#define AMAZON_ASC_WHBABCON_SETABEN (1 << 1)
-#define AMAZON_ASC_WHBABCON_CLRABEN (1 << 0)
-
-/***ASC Autobaud Status Register***/
-#define AMAZON_ASC_ABSTAT (AMAZON_ASC+ 0x0034)
-#define AMAZON_ASC_ABSTAT_DETWAIT (1 << 4)
-#define AMAZON_ASC_ABSTAT_SCCDET (1 << 3)
-#define AMAZON_ASC_ABSTAT_SCSDET (1 << 2)
-#define AMAZON_ASC_ABSTAT_FCCDET (1 << 1)
-#define AMAZON_ASC_ABSTAT_FCSDET (1 << 0)
-
-/***ASC Write HW Modified Autobaud Status Register***/
-#define AMAZON_ASC_WHBABSTAT (AMAZON_ASC+ 0x0058)
-#define AMAZON_ASC_WHBABSTAT_SETDETWAIT (1 << 9)
-#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT (1 << 8)
-#define AMAZON_ASC_WHBABSTAT_SETSCCDET (1 << 7)
-#define AMAZON_ASC_WHBABSTAT_CLRSCCDET (1 << 6)
-#define AMAZON_ASC_WHBABSTAT_SETSCSDET (1 << 5)
-#define AMAZON_ASC_WHBABSTAT_CLRSCSDET (1 << 4)
-#define AMAZON_ASC_WHBABSTAT_SETFCCDET (1 << 3)
-#define AMAZON_ASC_WHBABSTAT_CLRFCCDET (1 << 2)
-#define AMAZON_ASC_WHBABSTAT_SETFCSDET (1 << 1)
-#define AMAZON_ASC_WHBABSTAT_CLRFCSDET (1 << 0)
-
-/***ASC Clock Control Register***/
-#define AMAZON_ASC_CLC (AMAZON_ASC+ 0x0000)
-#define AMAZON_ASC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_ASC_CLC_DISS (1 << 1)
-#define AMAZON_ASC_CLC_DISR (1 << 0)
-
-/***ASC IRNCR0 **/
-#define AMAZON_ASC_IRNCR0 (AMAZON_ASC+ 0x00FC)
-/***ASC IRNCR1 **/
-#define AMAZON_ASC_IRNCR1 (AMAZON_ASC+ 0x00F8)
-#define ASC_IRNCR_TIR 0x1
-#define ASC_IRNCR_RIR 0x2
-#define ASC_IRNCR_EIR 0x4
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-
-#define AMAZON_DMA (KSEG1+0x10103000)
-/***********************************************************************/
-#define AMAZON_DMA_CH_ON AMAZON_DMA+0x28
-#define AMAZON_DMA_CH_RST AMAZON_DMA+0x2c
-#define AMAZON_DMA_CH0_ISR AMAZON_DMA+0x30
-#define AMAZON_DMA_CH1_ISR AMAZON_DMA+0x34
-#define AMAZON_DMA_CH2_ISR AMAZON_DMA+0x38
-#define AMAZON_DMA_CH3_ISR AMAZON_DMA+0x3c
-#define AMAZON_DMA_CH4_ISR AMAZON_DMA+0x40
-#define AMAZON_DMA_CH5_ISR AMAZON_DMA+0x44
-#define AMAZON_DMA_CH6_ISR AMAZON_DMA+0x48
-#define AMAZON_DMA_CH7_ISR AMAZON_DMA+0x4c
-#define AMAZON_DMA_CH8_ISR AMAZON_DMA+0x50
-#define AMAZON_DMA_CH9_ISR AMAZON_DMA+0x54
-#define AMAZON_DMA_CH10_ISR AMAZON_DMA+0x58
-#define AMAZON_DMA_CH11_ISR AMAZON_DMA+0x5c
-#define AMAZON_DMA_CH0_MSK AMAZON_DMA+0x60
-#define AMAZON_DMA_CH1_MSK AMAZON_DMA+0x64
-#define AMAZON_DMA_CH2_MSK AMAZON_DMA+0x68
-#define AMAZON_DMA_CH3_MSK AMAZON_DMA+0x6c
-#define AMAZON_DMA_CH4_MSK AMAZON_DMA+0x70
-#define AMAZON_DMA_CH5_MSK AMAZON_DMA+0x74
-#define AMAZON_DMA_CH6_MSK AMAZON_DMA+0x78
-#define AMAZON_DMA_CH7_MSK AMAZON_DMA+0x7c
-#define AMAZON_DMA_CH8_MSK AMAZON_DMA+0x80
-#define AMAZON_DMA_CH9_MSK AMAZON_DMA+0x84
-#define AMAZON_DMA_CH10_MSK AMAZON_DMA+0x88
-#define AMAZON_DMA_CH11_MSK AMAZON_DMA+0x8c
-#define AMAZON_DMA_Desc_BA AMAZON_DMA+0x90
-#define AMAZON_DMA_CH0_DES_LEN AMAZON_DMA+0x94
-#define AMAZON_DMA_CH1_DES_LEN AMAZON_DMA+0x98
-#define AMAZON_DMA_CH2_DES_LEN AMAZON_DMA+0x9c
-#define AMAZON_DMA_CH3_DES_LEN AMAZON_DMA+0xa0
-#define AMAZON_DMA_CH4_DES_LEN AMAZON_DMA+0xa4
-#define AMAZON_DMA_CH5_DES_LEN AMAZON_DMA+0xa8
-#define AMAZON_DMA_CH6_DES_LEN AMAZON_DMA+0xac
-#define AMAZON_DMA_CH7_DES_LEN AMAZON_DMA+0xb0
-#define AMAZON_DMA_CH8_DES_LEN AMAZON_DMA+0xb4
-#define AMAZON_DMA_CH9_DES_LEN AMAZON_DMA+0xb8
-#define AMAZON_DMA_CH10_DES_LEN AMAZON_DMA+0xbc
-#define AMAZON_DMA_CH11_DES_LEN AMAZON_DMA+0xc0
-#define AMAZON_DMA_CH1_DES_OFST AMAZON_DMA+0xc4
-#define AMAZON_DMA_CH2_DES_OFST AMAZON_DMA+0xc8
-#define AMAZON_DMA_CH3_DES_OFST AMAZON_DMA+0xcc
-#define AMAZON_DMA_CH4_DES_OFST AMAZON_DMA+0xd0
-#define AMAZON_DMA_CH5_DES_OFST AMAZON_DMA+0xd4
-#define AMAZON_DMA_CH6_DES_OFST AMAZON_DMA+0xd8
-#define AMAZON_DMA_CH7_DES_OFST AMAZON_DMA+0xdc
-#define AMAZON_DMA_CH8_DES_OFST AMAZON_DMA+0xe0
-#define AMAZON_DMA_CH9_DES_OFST AMAZON_DMA+0xe4
-#define AMAZON_DMA_CH10_DES_OFST AMAZON_DMA+0xe8
-#define AMAZON_DMA_CH11_DES_OFST AMAZON_DMA+0xec
-#define AMAZON_DMA_SW_BL AMAZON_DMA+0xf0
-#define AMAZON_DMA_TPE_BL AMAZON_DMA+0xf4
-#define AMAZON_DMA_DPlus2FPI_BL AMAZON_DMA+0xf8
-#define AMAZON_DMA_GRX_BUF_LEN AMAZON_DMA+0xfc
-#define AMAZON_DMA_DMA_ECON_REG AMAZON_DMA+0x100
-#define AMAZON_DMA_POLLING_REG AMAZON_DMA+0x104
-#define AMAZON_DMA_CH_WGT AMAZON_DMA+0x108
-#define AMAZON_DMA_TX_WGT AMAZON_DMA+0x10c
-#define AMAZON_DMA_DPLus2FPI_CLASS AMAZON_DMA+0x110
-#define AMAZON_DMA_COMB_ISR AMAZON_DMA+0x114
-
-//channel reset
-#define SWITCH1_RST_MASK 0x83 /* Switch1 channel mask */
-#define SWITCH2_RST_MASK 0x10C /* Switch1 channel mask */
-#define TPE_RST_MASK 0x630 /* TPE channel mask */
-#define DPlus2FPI_RST_MASK 0x840 /* DPlusFPI channel mask */
-
-//ISR
-#define DMA_ISR_RDERR 0x20
-#define DMA_ISR_CMDCPT 0x10
-#define DMA_ISR_CPT 0x8
-#define DMA_ISR_DURR 0x4
-#define DMA_ISR_EOP 0x2
-#define DMA_DESC_BYTEOFF_SHIFT 23
-
-#define DMA_POLLING_ENABLE 0x80000000
-#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/
-
-/***********************************************************************/
-/* Module : Debug register address and bits */
-/***********************************************************************/
-
-#define AMAZON_DEBUG (KSEG1+0x1F106000)
-/***********************************************************************/
-
-
-/***MCD Break System Control Register***/
-#define AMAZON_DEBUG_MCD_BSCR ((volatile u32*)(AMAZON_DEBUG+ 0x0000))
-
-/***PMC Performance Counter Control Register0***/
-#define AMAZON_DEBUG_PMC_PCCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0010))
-
-/***PMC Performance Counter Control Register1***/
-#define AMAZON_DEBUG_PMC_PCCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0014))
-
-/***PMC Performance Counter Register0***/
-#define AMAZON_DEBUG_PMC_PCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0018))
-
-/*165001:henryhsu:20050603:Source modified by Bing Tao*/
-
-/***PMC Performance Counter Register1***/
-//#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0020))
-#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x001c))
-
-/*165001*/
-
-
-
-/***MCD Suspend Mode Control Register***/
-#define AMAZON_DEBUG_MCD_SMCR ((volatile u32*)(AMAZON_DEBUG+ 0x0024))
-
-/***********************************************************************/
-/* Module : GPIO register address and bits */
-/***********************************************************************/
-
-#define AMAZON_GPIO (KSEG1+0x10100B00)
-/***********************************************************************/
-
-
-/***Port 0 Data Output Register (0010H)***/
-#define AMAZON_GPIO_P0_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0010))
-
-/***Port 1 Data Output Register (0040H)***/
-#define AMAZON_GPIO_P1_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0040))
-
-/***Port 0 Data Input Register (0014H)***/
-#define AMAZON_GPIO_P0_IN ((volatile u32*)(AMAZON_GPIO+ 0x0014))
-
-/***Port 1 Data Input Register (0044H)***/
-#define AMAZON_GPIO_P1_IN ((volatile u32*)(AMAZON_GPIO+ 0x0044))
-
-/***Port 0 Direction Register (0018H)***/
-#define AMAZON_GPIO_P0_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0018))
-
-/***Port 1 Direction Register (0048H)***/
-#define AMAZON_GPIO_P1_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0048))
-
-/***Port 0 Alternate Function Select Register 0 (001C H) ***/
-#define AMAZON_GPIO_P0_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x001C))
-
-/***Port 1 Alternate Function Select Register 0 (004C H) ***/
-#define AMAZON_GPIO_P1_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x004C))
-
-/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
-#define AMAZON_GPIO_P0_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0020))
-
-/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
-#define AMAZON_GPIO_P1_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0050))
-
-/***Port 0 Open Drain Control Register (0024H)***/
-#define AMAZON_GPIO_P0_OD ((volatile u32*)(AMAZON_GPIO+ 0x0024))
-
-/***Port 1 Open Drain Control Register (0054H)***/
-#define AMAZON_GPIO_P1_OD ((volatile u32*)(AMAZON_GPIO+ 0x0054))
-
-/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
-#define AMAZON_GPIO_P0_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0028))
-
-/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
-#define AMAZON_GPIO_P1_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0058))
-
-/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
-#define AMAZON_GPIO_P0_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x002C))
-
-/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
-#define AMAZON_GPIO_P1_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x005C))
-
-/***Port 0 Pull Up Device Enable Register (0030 H)***/
-#define AMAZON_GPIO_P0_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0030))
-
-/***Port 1 Pull Up Device Enable Register (0060 H)***/
-#define AMAZON_GPIO_P1_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0060))
-
-/***********************************************************************/
-/* Module : BIU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_BIU (KSEG1+0x1FA80000)
-/***********************************************************************/
-
-
-/***BIU Identification Register***/
-#define AMAZON_BIU_ID ((volatile u32*)(AMAZON_BIU+ 0x0000))
-#define AMAZON_BIU_ID_ARCH (1 << 16)
-#define AMAZON_BIU_ID_ID(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define AMAZON_BIU_ID_REV(value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***BIU Access Error Cause Register***/
-#define AMAZON_BIU_ERRCAUSE ((volatile u32*)(AMAZON_BIU+ 0x0100))
-#define AMAZON_BIU_ERRCAUSE_ERR (1 << 31)
-#define AMAZON_BIU_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16)
-#define AMAZON_BIU_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***BIU Access Error Address Register***/
-#define AMAZON_BIU_ERRADDR ((volatile u32*)(AMAZON_BIU+ 0x0108))
-#define AMAZON_BIU_ERRADDR_ADDR
-
-/***********************************************************************/
-/* Module : ICU register address and bits */
-/***********************************************************************/
-
-#define AMAZON_ICU (KSEG1+0x1F101000)
-/***********************************************************************/
-
-/***IM0 Interrupt Status Register***/
-#define AMAZON_ICU_IM0_ISR (AMAZON_ICU + 0x0010)
-#define AMAZON_ICU_IM1_ISR (AMAZON_ICU + 0x0020)
-#define AMAZON_ICU_IM2_ISR (AMAZON_ICU + 0x0030)
-#define AMAZON_ICU_IM3_ISR (AMAZON_ICU + 0x0040)
-#define AMAZON_ICU_IM4_ISR (AMAZON_ICU + 0x0050)
-
-/***IM0 Interrupt Enable Register***/
-#define AMAZON_ICU_IM0_IER (AMAZON_ICU + 0x0014)
-#define AMAZON_ICU_IM1_IER (AMAZON_ICU + 0x0024)
-#define AMAZON_ICU_IM2_IER (AMAZON_ICU + 0x0034)
-#define AMAZON_ICU_IM3_IER (AMAZON_ICU + 0x0044)
-#define AMAZON_ICU_IM4_IER (AMAZON_ICU + 0x0054)
-
-/***IM0 Interrupt Output Status Register***/
-#define AMAZON_ICU_IM0_IOSR (AMAZON_ICU + 0x0018)
-#define AMAZON_ICU_IM1_IOSR (AMAZON_ICU + 0x0028)
-#define AMAZON_ICU_IM2_IOSR (AMAZON_ICU + 0x0038)
-#define AMAZON_ICU_IM3_IOSR (AMAZON_ICU + 0x0048)
-#define AMAZON_ICU_IM4_IOSR (AMAZON_ICU + 0x0058)
-
-/***IM0 Interrupt Request Set Register***/
-#define AMAZON_ICU_IM0_IRSR (AMAZON_ICU + 0x001c)
-#define AMAZON_ICU_IM1_IRSR (AMAZON_ICU + 0x002c)
-#define AMAZON_ICU_IM2_IRSR (AMAZON_ICU + 0x003c)
-#define AMAZON_ICU_IM3_IRSR (AMAZON_ICU + 0x004c)
-#define AMAZON_ICU_IM4_IRSR (AMAZON_ICU + 0x005c)
-
-/***Interrupt Vector Value Register***/
-#define AMAZON_ICU_IM_VEC (AMAZON_ICU + 0x0060)
-
-/***Interrupt Vector Value Mask***/
-#define AMAZON_ICU_IM0_VEC_MASK 0x0000001f
-#define AMAZON_ICU_IM1_VEC_MASK 0x000003e0
-#define AMAZON_ICU_IM2_VEC_MASK 0x00007c00
-#define AMAZON_ICU_IM3_VEC_MASK 0x000f8000
-#define AMAZON_ICU_IM4_VEC_MASK 0x01f00000
-
-/***DMA Interrupt Mask Value***/
-#define AMAZON_DMA_H_MASK 0x00000fff
-
-/***External Interrupt Control Register***/
-#define AMAZON_ICU_EXTINTCR ((volatile u32*)(AMAZON_ICU + 0x0000))
-#define AMAZON_ICU_IRNICR ((volatile u32*)(AMAZON_ICU + 0x0004))
-#define AMAZON_ICU_IRNCR ((volatile u32*)(AMAZON_ICU + 0x0008))
-#define AMAZON_ICU_IRNEN ((volatile u32*)(AMAZON_ICU + 0x000c))
-
-/***********************************************************************/
-/* Module : PCI/Card-BUS/PC-Card register address and bits */
-/***********************************************************************/
-
-#define AMAZON_PCI (KSEG1+0x10105400)
-#define AMAZON_PCI_CFG_BASE (KSEG1+0x11000000)
-#define AMAZON_PCI_MEM_BASE (KSEG1+0x12000000)
-
-#define CLOCK_CONTROL AMAZON_PCI + 0x00000000
-#define ARB_CTRL_bit 1
-#define IDENTIFICATION AMAZON_PCI + 0x00000004
-#define SOFTRESET AMAZON_PCI + 0x00000010
-#define PCI_FPI_ERROR_ADDRESS AMAZON_PCI + 0x00000014
-#define FPI_PCI_ERROR_ADDRESS AMAZON_PCI + 0x00000018
-#define FPI_ERROR_TAG AMAZON_PCI + 0x0000001c
-#define IRR AMAZON_PCI + 0x00000020
-#define IRA_IR AMAZON_PCI + 0x00000024
-#define IRM AMAZON_PCI + 0x00000028
-#define DMA_COMPLETE_BIT 0
-#define PCI_POWER_CHANGE_BIT 16
-#define PCI_MASTER0_BROKEN_INT_BIT 24
-#define PCI_MASTER1_BROKEN_INT_BIT 25
-#define PCI_MASTER2_BROKEN_INT_BIT 26
-#define EOI AMAZON_PCI + 0x0000002c
-#define PCI_MODE AMAZON_PCI + 0x00000030
-#define PCI_MODE_cfgok_bit 24
-#define DEVICE_VENDOR_ID AMAZON_PCI + 0x00000034
-#define SUBSYSTEM_VENDOR_ID AMAZON_PCI + 0x00000038
-#define POWER_MANAGEMENT AMAZON_PCI + 0x0000003c
-#define CLASS_CODE1 AMAZON_PCI + 0x00000040
-#define BAR11_MASK AMAZON_PCI + 0x00000044
-#define BAR12_MASK AMAZON_PCI + 0x00000048
-#define BAR13_MASK AMAZON_PCI + 0x0000004c
-#define BAR14_MASK AMAZON_PCI + 0x00000050
-#define BAR15_MASK AMAZON_PCI + 0x00000054
-#define BAR16_MASK AMAZON_PCI + 0x00000058
-#define CARDBUS_CIS_POINTER1 AMAZON_PCI + 0x0000005c
-#define SUBSYSTEM_ID1 AMAZON_PCI + 0x00000060
-#define PCI_ADDRESS_MAP_11 AMAZON_PCI + 0x00000064
-#define PCI_ADDRESS_MAP_12 AMAZON_PCI + 0x00000068
-#define PCI_ADDRESS_MAP_13 AMAZON_PCI + 0x0000006c
-#define PCI_ADDRESS_MAP_14 AMAZON_PCI + 0x00000070
-#define PCI_ADDRESS_MAP_15 AMAZON_PCI + 0x00000074
-#define PCI_ADDRESS_MAP_16 AMAZON_PCI + 0x00000078
-#define FPI_SEGMENT_ENABLE AMAZON_PCI + 0x0000007c
-#define CLASS_CODE2 AMAZON_PCI + 0x00000080
-#define BAR21_MASK AMAZON_PCI + 0x00000084
-#define BAR22_MASK AMAZON_PCI + 0x00000088
-#define BAR23_MASK AMAZON_PCI + 0x0000008c
-#define BAR24_MASK AMAZON_PCI + 0x00000090
-#define BAR25_MASK AMAZON_PCI + 0x00000094
-#define BAR26_MASK AMAZON_PCI + 0x00000098
-#define CARDBUS_CIS_POINTER2 AMAZON_PCI + 0x0000009c
-#define SUBSYSTEM_ID2 AMAZON_PCI + 0x000000a0
-#define PCI_ADDRESS_MAP_21 AMAZON_PCI + 0x000000a4
-#define PCI_ADDRESS_MAP_22 AMAZON_PCI + 0x000000a8
-#define PCI_ADDRESS_MAP_23 AMAZON_PCI + 0x000000ac
-#define PCI_ADDRESS_MAP_24 AMAZON_PCI + 0x000000b0
-#define PCI_ADDRESS_MAP_25 AMAZON_PCI + 0x000000b4
-#define PCI_ADDRESS_MAP_26 AMAZON_PCI + 0x000000b8
-#define FPI_ADDRESS_MASK11LOW AMAZON_PCI + 0x000000bc
-#define FPI_ADDRESS_MAP_0 AMAZON_PCI + 0x000000c0
-#define FPI_ADDRESS_MAP_1 AMAZON_PCI + 0x000000c4
-#define FPI_ADDRESS_MAP_2 AMAZON_PCI + 0x000000c8
-#define FPI_ADDRESS_MAP_3 AMAZON_PCI + 0x000000cc
-#define FPI_ADDRESS_MAP_4 AMAZON_PCI + 0x000000d0
-#define FPI_ADDRESS_MAP_5 AMAZON_PCI + 0x000000d4
-#define FPI_ADDRESS_MAP_6 AMAZON_PCI + 0x000000d8
-#define FPI_ADDRESS_MAP_7 AMAZON_PCI + 0x000000dc
-#define FPI_ADDRESS_MAP_11LOW AMAZON_PCI + 0x000000e0
-#define FPI_ADDRESS_MAP_11HIGH AMAZON_PCI + 0x000000e4
-#define FPI_BURST_LENGTH AMAZON_PCI + 0x000000e8
-#define SET_PCI_SERR AMAZON_PCI + 0x000000ec
-#define DMA_FPI_START_ADDR AMAZON_PCI + 0x000000f0
-#define DMA_PCI_START_ADDR AMAZON_PCI + 0x000000f4
-#define DMA_TRANSFER_COUNT AMAZON_PCI + 0x000000f8
-#define DMA_CONTROL_STATUS AMAZON_PCI + 0x000000fc
-
-#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x0800
-#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1000
-#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1800
-#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2000
-#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2800
-#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3000
-#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3800
-#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4000
-#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4800
-#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5000
-#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5800
-#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6000
-#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6800
-#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7000
-#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7800
-#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0XF000
-#define EXT_PCI_BAR1_ADDR 0x10
-#define EXT_PCI_BAR2_ADDR 0x14
-#define EXT_PCI_BAR3_ADDR 0x18
-#define EXT_PCI_BAR4_ADDR 0x1C
-#define EXT_PCI_BAR5_ADDR 0x20
-#define EXT_PCI_BAR6_ADDR 0x24
-
-#define DEVICE_ID_VECDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x0
-#define STATUS_COMMAND_ADDR AMAZON_PCI_CFG_BASE + 0x4
-#define BUS_MASTER_ENABLE_BIT 2
-#define MEM_SPACE_ENABLE_BIT 1
-#define CLASS_CODE_REVISION_ADDR AMAZON_PCI_CFG_BASE + 0x8
-#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR AMAZON_PCI_CFG_BASE + 0xC
-#define BAR1_ADDR AMAZON_PCI_CFG_BASE + 0x10
-#define BAR2_ADDR AMAZON_PCI_CFG_BASE + 0x14
-#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18
-#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C
-#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18
-#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C
-#define BAR5_ADDR AMAZON_PCI_CFG_BASE + 0x20
-#define BAR6_ADDR AMAZON_PCI_CFG_BASE + 0x24
-#define CARDBUS_CIS_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x28
-#define SUBSYSTEM_ID_VENDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x2C
-#define EXPANSION_ROM_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x30
-#define CAPABILITIES_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x34
-#define RESERVED_0x38 AMAZON_PCI_CFG_BASE + 0x38
-#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR AMAZON_PCI_CFG_BASE + 0x3C
-#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR AMAZON_PCI_CFG_BASE + 0x40
-#define POWER_MANAGEMENT_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x44
-#define RESERVED_0x48 AMAZON_PCI_CFG_BASE + 0x48
-#define RESERVED_0x4C AMAZON_PCI_CFG_BASE + 0x4C
-#define ERROR_ADDR_PCI_FPI_ADDR AMAZON_PCI_CFG_BASE + 0x50
-#define ERROR_ADdR_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x54
-#define ERROR_TAG_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x58
-#define PCI_ARB_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x5C
-#define INTERNAL_ARB_ENABLE_BIT 0
-#define ARB_SCHEME_BIT 1
-#define PCI_MASTER0_PRIOR_2BITS 2
-#define PCI_MASTER1_PRIOR_2BITS 4
-#define PCI_MASTER2_PRIOR_2BITS 6
-#define PCI_MASTER0_REQ_MASK_2BITS 8
-#define PCI_MASTER1_REQ_MASK_2BITS 10
-#define PCI_MASTER2_REQ_MASK_2BITS 12
-#define PCI_MASTER0_GNT_MASK_2BITS 14
-#define PCI_MASTER1_GNT_MASK_2BITS 16
-#define PCI_MASTER2_GNT_MASK_2BITS 18
-#define FPI_PCI_INT_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x60
-#define FPI_PCI_INT_ACK_ADDR AMAZON_PCI_CFG_BASE + 0x64
-#define FPI_PCI_INT_MASK_ADDR AMAZON_PCI_CFG_BASE + 0x68
-#define CARDBUS_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x6C
-#define CARDBUS_CFRAME_ENABLE 0
-
-#define CLOCK_CONTROL_default 0x00000000
-#define CLOCK_CONTROL_mask 0x00000003
-
-#define IDENTIFICATION_default 0x0011C002
-#define IDENTIFICATION_mask 0x00000000
-
-#define SOFTRESET_default 0x00000000
-// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over
-#define SOFTRESET_mask 0x00000000
-
-#define PCI_FPI_ERROR_ADDRESS_default 0xFFFFFFFF
-#define PCI_FPI_ERROR_ADDRESS_mask 0x00000000
-
-#define FPI_PCI_ERROR_ADDRESS_default 0xFFFFFFFF
-#define FPI_PCI_ERROR_ADDRESS_mask 0x00000000
-
-#define FPI_ERROR_TAG_default 0x0000000F
-#define FPI_ERROR_TAG_mask 0x00000000
-
-#define IRR_default 0x00000000
-#define IRR_mask 0x07013b2F
-
-#define IRA_IR_default 0x00000000
-#define IRA_IR_mask 0x07013b2F
-
-#define IRM_default 0x00000000
-#define IRM_mask 0xFFFFFFFF
-
-#define EOI_default 0x00000000
-#define EOI_mask 0x00000000
-
-#define PCI_MODE_default 0x01000103
-#define PCI_MODE_mask 0x1107070F
-
-#define DEVICE_VENDOR_ID_default 0x000C15D1
-#define DEVICE_VENDOR_ID_mask 0xFFFFFFFF
-
-#define SUBSYSTEM_VENDOR_ID_default 0x000015D1
-#define SUBSYSTEM_VENDOR_ID_mask 0x0000FFFF
-
-#define POWER_MANAGEMENT_default 0x0000001B
-#define POWER_MANAGEMENT_mask 0x0000001F
-
-#define CLASS_CODE1_default 0x00028000
-#define CLASS_CODE1_mask 0x00FFFFFF
-
-#define BAR11_MASK_default 0x0FF00008
-#define BAR11_MASK_mask 0x8FF00008
-
-#define BAR12_MASK_default 0x80001800
-#define BAR12_MASK_mask 0x80001F08
-
-#define BAR13_MASK_default 0x8FF00008
-#define BAR13_MASK_mask 0x8FF00008
-
-#define BAR14_MASK_default 0x8F000000
-#define BAR14_MASK_mask 0x8FFFFF08
-
-#define BAR15_MASK_default 0x80000000
-#define BAR15_MASK_mask 0x8FFFFF08
-
-#define BAR16_MASK_default 0x80000001
-// bit 0 and bit 3 is mutually exclusive
-#define BAR16_MASK_mask 0x8FFFFFF9
-
-#define CARDBUS_CIS_POINTER1_default 0x00000000
-#define CARDBUS_CIS_POINTER1_mask 0x03FFFFFF
-
-#define SUBSYSTEM_ID1_default 0x0000000C
-#define SUBSYSTEM_ID1_mask 0x0000FFFF
-
-#define PCI_ADDRESS_MAP_11_default 0x18000000
-#define PCI_ADDRESS_MAP_11_mask 0x7FFFFFF1
-
-#define PCI_ADDRESS_MAP_12_default 0x18100000
-#define PCI_ADDRESS_MAP_12_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_13_default 0x18200000
-#define PCI_ADDRESS_MAP_13_mask 0x7FF00001
-
-#define PCI_ADDRESS_MAP_14_default 0x70000000
-#define PCI_ADDRESS_MAP_14_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_15_default 0x00000001
-#define PCI_ADDRESS_MAP_15_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_16_default 0x60000000
-#define PCI_ADDRESS_MAP_16_mask 0x7FF00001
-
-#define FPI_SEGMENT_ENABLE_default 0x000003FF
-#define FPI_SEGMENT_ENABLE_mask 0x000003FF
-
-#define CLASS_CODE2_default 0x00FF0000
-#define CLASS_CODE2_mask 0x00FFFFFF
-
-#define BAR21_MASK_default 0x80000008
-#define BAR21_MASK_mask 0x8FFFFFF8
-
-#define BAR22_MASK_default 0x80000008
-#define BAR22_MASK_mask 0x80001F08
-
-#define BAR23_MASK_default 0x80000008
-#define BAR23_MASK_mask 0x8FF00008
-
-#define BAR24_MASK_default 0x8FE00000
-#define BAR24_MASK_mask 0x8FFFFF08
-
-#define BAR25_MASK_default 0x8FFFF000
-#define BAR25_MASK_mask 0x8FFFFF08
-
-#define BAR26_MASK_default 0x8FFFFFE1
-#define BAR26_MASK_mask 0x8FFFFFF1
-
-#define CARDBUS_CIS_POINTER2_default 0x00000000
-#define CARDBUS_CIS_POINTER2_mask 0x03FFFFFF
-
-#define SUBSYSTEM_ID2_default 0x0000000C
-#define SUBSYSTEM_ID2_mask 0x0000FFFF
-
-#define PCI_ADDRESS_MAP_21_default 0x3FE00000
-#define PCI_ADDRESS_MAP_21_mask 0x7FFFFFF1
-
-#define PCI_ADDRESS_MAP_22_default 0x68000000
-#define PCI_ADDRESS_MAP_22_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_23_default 0x20000000
-#define PCI_ADDRESS_MAP_23_mask 0x7FF00001
-
-#define PCI_ADDRESS_MAP_24_default 0x70000001
-#define PCI_ADDRESS_MAP_24_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_25_default 0x78000001
-#define PCI_ADDRESS_MAP_25_mask 0x7FFFFF01
-
-#define PCI_ADDRESS_MAP_26_default 0x20000000
-#define PCI_ADDRESS_MAP_26_mask 0x7FF00001
-
-#define FPI_ADDRESS_MASK11LOW_default 0x00000000
-#define FPI_ADDRESS_MASK11LOW_mask 0x00070000
-
-#define FPI_ADDRESS_MAP_0_default 0x00000000
-#define FPI_ADDRESS_MAP_0_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_1_default 0x10000000
-#define FPI_ADDRESS_MAP_1_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_2_default 0x20000000
-#define FPI_ADDRESS_MAP_2_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_3_default 0x30000000
-#define FPI_ADDRESS_MAP_3_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_4_default 0x40000000
-#define FPI_ADDRESS_MAP_4_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_5_default 0x50000000
-#define FPI_ADDRESS_MAP_5_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_6_default 0x60000000
-#define FPI_ADDRESS_MAP_6_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_7_default 0x70000000
-#define FPI_ADDRESS_MAP_7_mask 0xFFF00000
-
-#define FPI_ADDRESS_MAP_11LOW_default 0xB0000000
-#define FPI_ADDRESS_MAP_11LOW_mask 0xFFFF0000
-
-#define FPI_ADDRESS_MAP_11HIGH_default 0xB8000000
-#define FPI_ADDRESS_MAP_11HIGH_mask 0xFFF80000
-
-#define FPI_BURST_LENGTH_default 0x00000000
-#define FPI_BURST_LENGTH_mask 0x00000303
-
-#define SET_PCI_SERR_default 0x00000000
-#define SET_PCI_SERR_mask 0x00000000
-
-#define DMA_FPI_START_ADDRESS_default 0x00000000
-#define DMA_FPI_START_ADDRESS_mask 0xFFFFFFFF
-
-#define DMA_PCI_START_ADDRESS_default 0x00000000
-#define DMA_PCI_START_ADDRESS_mask 0xFFFFFFFF
-
-#define DMA_TRANSFER_COUNT_default 0x00000000
-#define DMA_TRANSFER_COUNT_mask 0x0000FFFF
-
-#define DMA_CONTROL_STATUS_default 0x00000000
-#define DMA_CONTROL_STATUS_mask 0x00000000 // bit 0,1 is writable
-
-/***********************************************************************/
-#undef IKOS_MINI_BOOT //don't run a full booting
-#ifdef CONFIG_USE_IKOS
-#define CONFIG_USE_VENUS //Faster, 10M CPU and 192k baudrate
-#ifdef CONFIG_USE_VENUS
-#define IKOS_CPU_SPEED 10000000
-#else
-#define IKOS_CPU_SPEED 180000 //IKOS is slow
-#endif
-#endif //CONFIG_USE_IKOS
-
-/* 165001:henryhsu:20050603:Source Modify form Bing Tao */
-
-#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE)
-#define EBU_PCI_SOFTWARE_ARBITOR
-#endif
-
-#define AMAZON_B11
-#ifdef AMAZON_B11
-#define SWITCH_BUF_FPI_ADDR (0x10110000)
-#define SWITCH_BUF_ADDR (KSEG1+SWITCH_BUF_FPI_ADDR)
-#define SWITCH_BUF_SIZE (0x2800)
-#define AMAZON_B11_CBM_QD_ADDR (SWITCH_BUF_ADDR+0x0)
-#define AMAZON_B11_BOND_CELL_ADDR (SWITCH_BUF_ADDR+0x000)
-#endif
-#define AMAZON_REFERENCE_BOARD
-//for AMAZON ATM bonding application
-#ifdef AMAZON_REFERENCE_BOARD
-#define GPIO_DETECT_LOW
-#else
-#undef GPIO_DETECT_LOW
-#endif
-
-/* 165001 */
-
-#undef AMAZON_IKOS_DEBUG_MSG
-#undef AMAZON_INT_DEBUG_MSG
-#undef AMAZON_ATM_DEBUG_MSG
-#undef AMAZON_DMA_DEBUG_MSG
-#undef AMAZON_SW_DEBUG_MSG
-#undef AMAZON_WDT_DEBUG_MSG
-#undef AMAZON_MTD_DEBUG_MSG
-#undef AMAZON_SSC_DEBUG_MSG
-#undef AMAZON_MEI_DEBUG_MSG
-
-#ifdef AMAZON_IKOS_DEBUG_MSG
-#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
-#else
-#define AMAZON_IKOS_DMSG(fmt,args...)
-#endif
-
-#ifdef AMAZON_WDT_DEBUG_MSG
-#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_WDT_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_SSC_DEBUG_MSG
-#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_SSC_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_DMA_DEBUG_MSG
-#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_DMA_DMSG(fm,args...)
-#endif
-
-#ifdef AMAZON_ATM_DEBUG_MSG
-#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args)
-#else //not AMAZON_ATM_DEBUG
-#define AMAZON_TPE_DMSG(fmt, args...)
-#endif //AMAZON_ATM_DEBUG
-
-#ifdef AMAZON_SW_DEBUG_MSG
-#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_SW_DMSG(fmt,args...)
-#endif
-
-#ifdef AMAZON_MTD_DEBUG_MSG
-#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args)
-#else
-#define AMAZON_MTD_DMSG(fmt,args...)
-#endif
-
-#ifdef AMAZON_INT_DEBUG_MSG
-#define AMAZON_INT_DMSG(x...) printk(x)
-#else
-#define AMAZON_INT_DMSG(x...)
-#endif
-
-#ifdef AMAZON_MEI_DEBUG_MSG
-#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args)
-#else
-#define AMAZON_MEI_DMSG(fmt,args...)
-#endif
-
-#endif //AMAZON_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h
deleted file mode 100644
index 63ab5924e5..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h
+++ /dev/null
@@ -1,148 +0,0 @@
-#ifndef AMAZON_DMA_H
-#define AMAZON_DMA_H
-
-#define RCV_INT 1
-#define TX_BUF_FULL_INT 2
-#define TRANSMIT_CPT_INT 4
-
-#define QOS_DEFAULT_WGT 0x7fffffffUL;
-
-
-enum attr_t{
- TX=0,
- RX=1,
- RESERVED=2,
- DEFAULT=3,
-
-};
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct rx_desc{
- u32 data_length:16;
- volatile u32 reserved:7;
- volatile u32 byte_offset:2;
- volatile u32 Burst_length_offset:3;
- volatile u32 EoP:1;
- volatile u32 Res:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer;
- /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/
-}_rx_desc;
-
-
-typedef struct tx_desc{
- volatile u32 data_length:16;
- volatile u32 reserved1:7;
- volatile u32 byte_offset:5;
- volatile u32 EoP:1;
- volatile u32 SoP:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer;//fix me:should be 28 bits here
-}_tx_desc;
-#else //BIG
-typedef struct rx_desc{
- union
- {
- struct
- {
- volatile u32 OWN :1;
- volatile u32 C :1;
- volatile u32 SoP :1;
- volatile u32 EoP :1;
- volatile u32 Burst_length_offset :3;
- volatile u32 byte_offset :2;
- volatile u32 reserve :7;
- volatile u32 data_length :16;
- }field;
-
- volatile u32 word;
- }status;
-
- volatile u32 Data_Pointer;
-}_rx_desc;
-
-
-typedef struct tx_desc{
- union
- {
- struct
- {
- volatile u32 OWN :1;
- volatile u32 C :1;
- volatile u32 SoP :1;
- volatile u32 EoP :1;
- volatile u32 byte_offset :5;
- volatile u32 reserved :7;
- volatile u32 data_length :16;
- }field;
-
- volatile u32 word;
- }status;
-
- volatile u32 Data_Pointer;
-}_tx_desc;
-
-#endif //ENDIAN
-
-struct dma_channel_info{
- /*filled by driver, optional*/
- enum attr_t attr;/*TX or RX*/
- int weight;
- int desc_num;
- int packet_size;
- int control;/*on or off*/
-
- int desc_base;
- int status;
-};
-
-typedef struct dma_channel_info _dma_channel_info;
-
-struct dma_device_info{
- /*variables*/
- /*filled by driver, compulsary*/
- char device_name[15];
- enum attr_t attr;/*default or else*/
- int tx_burst_len;
- int rx_burst_len;
-
- int logic_rx_chan_base;
- int logic_tx_chan_base;
- u8 on_ch_bit;
- /*filled by driver, optional*/
- int weight;
- int current_tx_chan;
- int current_rx_chan;
- int num_tx_chan;
- int num_rx_chan;
- struct dma_channel_info tx_chan[2];
- struct dma_channel_info rx_chan[4];
-
- /*functions, optional*/
- u8* (*buffer_alloc)(int len,int* offset, void** opt);
- int (*buffer_free)(u8* dataptr, void* opt);
- int (*intr_handler)(struct dma_device_info* info, int status);
- /*set by device, clear by dma*/
- int ack;
- void * priv; /* used by peripheral driver only */
-};
-typedef struct dma_device_info _dma_device_info;
-
-int dma_device_register(struct dma_device_info* info);
-
-int dma_device_unregister(struct dma_device_info* info);
-
-int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
-
-int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
-
-int dma_device_update(struct dma_device_info* info);
-
-void dma_device_update_rx(struct dma_device_info* dma_dev);
-
-void dma_device_update_tx(struct dma_device_info* dma_dev);
-
-void register_handler_sim(int (*handler)(int));
-#endif /* AMAZON_DMA_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h
deleted file mode 100644
index 6ac8ab310b..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h
+++ /dev/null
@@ -1,220 +0,0 @@
-#ifndef _AMAZON_MEI_H
-#define _AMAZON_MEI_H
-/////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#include "amazon_mei_app.h"
-
-#define AMAZON_MEI_DEBUG_ON
-#define AMAZON_MEI_CMV_EXTRA
-
-#define AMAZON_MEI_MAJOR 106
-
-/*
-** Define where in ME Processor's memory map the Stratify chip lives
-*/
-#define MEI_SPACE_ACCESS 0xB0100C00
-
-#define MAXSWAPSIZE 8 * 1024 //8k *(32bits)
-//#define AMAZON_ADSL_IMAGESIZE 16*1024 // 16k * (32bits)
-
-
-// Mailboxes
-#define MSG_LENGTH 16 // x16 bits
-#define YES_REPLY 1
-#define NO_REPLY 0
-
-#define CMV_TIMEOUT 100 //jiffies
-#define MIB_INTERVAL 10000 //msec
-
-/*** Bit definitions ***/
-
-#define FALSE 0
-#define TRUE 1
-#define BIT0 1<<0
-#define BIT1 1<<1
-#define BIT2 1<<2
-#define BIT3 1<<3
-#define BIT4 1<<4
-#define BIT5 1<<5
-#define BIT6 1<<6
-#define BIT7 1<<7
-#define BIT8 1<<8
-#define BIT9 1<<9
-#define BIT10 1<<10
-#define BIT11 1<<11
-#define BIT12 1<<12
-#define BIT13 1<<13
-#define BIT14 1<<14
-#define BIT15 1<<15
-#define BIT16 1<<16
-#define BIT17 1<<17
-#define BIT18 1<<18
-#define BIT19 1<<19
-#define BIT20 1<<20
-#define BIT21 1<<21
-#define BIT22 1<<22
-#define BIT23 1<<23
-#define BIT24 1<<24
-#define BIT25 1<<25
-#define BIT26 1<<26
-#define BIT27 1<<27
-#define BIT28 1<<28
-#define BIT29 1<<29
-#define BIT30 1<<30
-#define BIT31 1<<31
-
-
-/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS)
-#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS)
-#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS)
-#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS)
-#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS)
-#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS)
-#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS)
-#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS)
-#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS)
-#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS)
-#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS)
-#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS)
-#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS)
-#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS)
-#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS)
-#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS)
-#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS)
-
-
-// MEI_TO_ARC_INTERRUPT Register definitions
-#define MEI_TO_ARC_INT1 BIT3
-#define MEI_TO_ARC_INT0 BIT2
-#define MEI_TO_ARC_CS_DONE BIT1
-#define MEI_TO_ARC_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT Register definitions
-#define ARC_TO_MEI_INT1 BIT8
-#define ARC_TO_MEI_INT0 BIT7
-#define ARC_TO_MEI_CS_REQ BIT6
-#define ARC_TO_MEI_DBG_DONE BIT5
-#define ARC_TO_MEI_MSGACK BIT4
-#define ARC_TO_MEI_NO_ACCESS BIT3
-#define ARC_TO_MEI_CHECK_AAITX BIT2
-#define ARC_TO_MEI_CHECK_AAIRX BIT1
-#define ARC_TO_MEI_MSGAV BIT0
-
-// ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define GP_INT1_EN BIT8
-#define GP_INT0_EN BIT7
-#define CS_REQ_EN BIT6
-#define DBG_DONE_EN BIT5
-#define MSGACK_EN BIT4
-#define NO_ACC_EN BIT3
-#define AAITX_EN BIT2
-#define AAIRX_EN BIT1
-#define MSGAV_EN BIT0
-
-// MEI_CONTROL Register definitions
-#define INT_LEVEL BIT2
-#define SOFT_RESET BIT1
-#define HOST_MSTR BIT0
-
-// MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK (0x3)
-
-
-// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-// page swap requests.
-#define MEI_TO_ARC_MAILBOX (0x15FC0)
-#define MEI_TO_ARC_MAILBOXR (0x15FEC)
-#define ARC_TO_MEI_MAILBOX (0x15F90)
-#define ARC_MEI_MAILBOXR (0x15FBC)
-
-// Codeswap request messages are indicated by setting BIT31
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
-
-/*
-** Swap page header
-*/
-// Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-// Swap page header describes size in 32-bit words, load location, and image offset
-// for program and/or data segments
-typedef struct _arc_swp_page_hdr
-{
- u32 p_offset; // Offset bytes of progseg from beginning of image
- u32 p_dest; // Destination addr of progseg on processor
- u32 p_size; // Size in 32-bitwords of program segment
- u32 d_offset; // Offset bytes of dataseg from beginning of image
- u32 d_dest; // Destination addr of dataseg on processor
- u32 d_size; // Size in 32-bitwords of data segment
-}ARC_SWP_PAGE_HDR;
-
-
-/*
-** Swap image header
-*/
-#define GET_PROG 0 // Flag used for program mem segment
-#define GET_DATA 1 // Flag used for data mem segment
-
-// Image header contains size of image, checksum for image, and count of
-// page headers. Following that are 'count' page headers followed by
-// the code and/or data segments to be loaded
-typedef struct _arc_img_hdr
-{
- u32 size; // Size of binary image in bytes
- u32 checksum; // Checksum for image
- u32 count; // Count of swp pages in image
- ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
-}ARC_IMG_HDR;
-
-
-
-/*
-** Native size for the Stratiphy interface is 32-bits. All reads and writes
-** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
-** byte data. Read routines are provided. Write routines are probably a bad idea, as the
-** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
-** could very well have unintended results.
-*/
-MEI_ERROR meiCMV(u16 *, int); // first arg is CMV to ARC, second to indicate whether need reply
-
-void meiLongwordWrite(u32 ul_address, u32 ul_data);
-void meiLongwordRead(u32 ul_address, u32 *pul_data);
-
-
-MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
-
-MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
-
-void meiPollForDbgDone(void);
-
-void meiMailboxInterruptsDisable(void);
-void meiMailboxInterruptsEnable(void);
-
-MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize);
-MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize);
-
-int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest);
-
-MEI_ERROR meiHaltArc(void);
-MEI_ERROR meiRunArc(void);
-
-MEI_ERROR meiDownloadBootCode(void);
-
-MEI_ERROR meiForceRebootAdslModem(void);
-
-void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data);
-
-#endif
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h
deleted file mode 100644
index 89700d9d76..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h
+++ /dev/null
@@ -1,54 +0,0 @@
-//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl
-
-#ifndef _AMAZON_MEI_APP_H
-#define _AMAZON_MEI_APP_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-
- // ioctl control
-#define AMAZON_MEI_START 300
-#define AMAZON_MEI_REPLY 301
-#define AMAZON_MEI_NOREPLY 302
-
-#define AMAZON_MEI_RESET 303
-#define AMAZON_MEI_REBOOT 304
-#define AMAZON_MEI_HALT 305
-#define AMAZON_MEI_CMV_WINHOST 306
-#define AMAZON_MEI_CMV_READ 307
-#define AMAZON_MEI_CMV_WRITE 308
-#define AMAZON_MEI_MIB_DAEMON 309
-#define AMAZON_MEI_SHOWTIME 310
-#define AMAZON_MEI_REMOTE 311
-#define AMAZON_MEI_READDEBUG 312
-#define AMAZON_MEI_WRITEDEBUG 313
-#define AMAZON_MEI_LOP 314
-
-#define AMAZON_MEI_PCM_SETUP 315
-#define AMAZON_MEI_PCM_START_TIMER 316
-#define AMAZON_MEI_PCM_STOP_TIMER 317
-#define AMAZON_MEI_PCM_CHECK 318
-#define AMAZON_MEI_GET_EOC_LEN 319
-#define AMAZON_MEI_GET_EOC_DATA 320
-#define AMAZON_MEI_PCM_GETDATA 321
-#define AMAZON_MEI_PCM_GPIO 322
-#define AMAZON_MEI_EOC_SEND 323
-//MIB
-#define AMAZON_MIB_LO_ATUC 324
-#define AMAZON_MIB_LO_ATUR 325
-#define AMAZON_MEI_DOWNLOAD 326
-
-#define AMAZON_MEI_DEBUG_MODE 327 //509221:tc.chen
-#define LOOP_DIAGNOSTIC_MODE_COMPLETE 328
-
-
-/*** Enums ***/
-typedef enum mei_error
-{
- MEI_SUCCESS = 0,
- MEI_FAILURE = -1,
- MEI_MAILBOX_FULL = -2,
- MEI_MAILBOX_EMPTY = -3,
- MEI_MAILBOX_TIMEOUT = -4,
-}MEI_ERROR;
-
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h
deleted file mode 100644
index d98f60b171..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h
+++ /dev/null
@@ -1,1169 +0,0 @@
-// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics
-
-#ifndef __AMAZON_MEI_APP_IOCTL_H
-#define __AMAZON_MEI_APP_IOCTL_H
-
-#ifdef __KERNEL__
-#include "amazon_mei_ioctl.h"
-#endif
-
-/* Interface Name */
-//#define INTERFACE_NAME <define the interface>
-
-/* adslLineTable constants */
-#define GET_ADSL_LINE_CODE 1
-
-/* adslAtucPhysTable constants */
-#define GET_ADSL_ATUC_PHY 4
-
-/* adslAturPhysTable constants */
-#define GET_ADSL_ATUR_PHY 10
-
-/* adslAtucChanTable constants */
-#define GET_ADSL_ATUC_CHAN_INFO 15
-
-/* adslAturChanTable constants */
-#define GET_ADSL_ATUR_CHAN_INFO 18
-
-/* adslAtucPerfDataTable constants */
-#define GET_ADSL_ATUC_PERF_DATA 21
-
-/* adslAturPerfDataTable constants */
-#define GET_ADSL_ATUR_PERF_DATA 40
-
-/* adslAtucIntervalTable constants */
-#define GET_ADSL_ATUC_INTVL_INFO 60
-
-/* adslAturIntervalTable constants */
-#define GET_ADSL_ATUR_INTVL_INFO 65
-
-/* adslAtucChanPerfDataTable constants */
-#define GET_ADSL_ATUC_CHAN_PERF_DATA 70
-
-/* adslAturChanPerfDataTable constants */
-#define GET_ADSL_ATUR_CHAN_PERF_DATA 90
-
-/* adslAtucChanIntervalTable constants */
-#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110
-
-/* adslAturChanIntervalTable constants */
-#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115
-
-/* adslLineAlarmConfProfileTable constants */
-#define GET_ADSL_ALRM_CONF_PROF 120
-#define SET_ADSL_ALRM_CONF_PROF 121
-
-/* adslAturTrap constants */
-#define ADSL_ATUR_TRAPS 135
-
-////////////////// RFC-3440 //////////////
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-/* adslLineExtTable */
-#define GET_ADSL_ATUC_LINE_EXT 201
-#define SET_ADSL_ATUC_LINE_EXT 203
-
-/* adslAtucPerfDateExtTable */
-#define GET_ADSL_ATUC_PERF_DATA_EXT 205
-
-/* adslAtucIntervalExtTable */
-#define GET_ADSL_ATUC_INTVL_EXT_INFO 221
-
-/* adslAturPerfDataExtTable */
-#define GET_ADSL_ATUR_PERF_DATA_EXT 225
-
-/* adslAturIntervalExtTable */
-#define GET_ADSL_ATUR_INTVL_EXT_INFO 233
-
-/* adslAlarmConfProfileExtTable */
-#define GET_ADSL_ALRM_CONF_PROF_EXT 235
-#define SET_ADSL_ALRM_CONF_PROF_EXT 236
-
-/* adslAturExtTrap */
-#define ADSL_ATUR_EXT_TRAPS 240
-
-#endif
-
-// 603221:tc.chen start
-/* The following constants are added to support the WEB related ADSL Statistics */
-
-/* adslLineStatus constants */
-#define GET_ADSL_LINE_STATUS 245
-
-/* adslLineRate constants */
-#define GET_ADSL_LINE_RATE 250
-
-/* adslLineInformation constants */
-#define GET_ADSL_LINE_INFO 255
-
-/* adslNearEndPerformanceStats constants */
-#define GET_ADSL_NEAREND_STATS 270
-
-/* adslFarEndPerformanceStats constants */
-#define GET_ADSL_FAREND_STATS 290
-
-// 603221:tc.chen end
-
-/* Loop diagnostics mode of the ADSL line related constants */
-#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 295
-#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 296
-#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299
-
-/* Sub-carrier related parameters */
-#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
-#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
-#define GET_ADSL_LINE_INIT_STATS 150
-#define GET_ADSL_POWER_SPECTRAL_DENSITY 151
-
-
-///////////////////////////////////////////////////////////
-// makeCMV(Opcode, Group, Address, Index, Size, Data)
-
-/* adslLineCode Flags */
-#define LINE_CODE_FLAG 0x1 /* BIT 0th position */
-
-/* adslAtucPhysTable Flags */
-#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data)
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data)
-
-#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
-#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data)
-
-#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
-#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data)
-
-#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */
-
-#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */
-#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data)
-
-#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */
-#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data)
-
-
-/* adslAturPhysTable Flags */
-#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data)
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data)
-
-#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */
-#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data)
-
-#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */
-#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data)
-
-#define ATUR_SNRMGN_FLAG 0x8
-#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data)
-
-#define ATUR_ATTN_FLAG 0x10
-#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
-
-#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */
-
-#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */
-#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data)
-
-#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */
-#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data)
-
-/* adslAtucChanTable Flags */
-#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
-#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data)
-
-#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
-#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
-
-#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
-
-/* adslAturChanTable Flags */
-#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */
-#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data)
-
-#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */
-#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
-
-#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */
-
-#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */
-
-/* adslAtucPerfDataTable Flags */
-#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
-#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */
-#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data)
-#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */
-#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
-#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
-#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
-#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */
-#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
-#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
-#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */
-#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */
-#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
-#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
-#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */
-#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */
-
-/* adslAturPerfDataTable Flags */
-#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */
-#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */
-#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */
-#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
-#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */
-#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
-#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */
-#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */
-#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */
-#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */
-#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */
-#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */
-#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */
-#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */
-#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */
-#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */
-#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */
-#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */
-#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */
-#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */
-
-/* adslAtucIntervalTable Flags */
-#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
-#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */
-#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */
-#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */
-#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
-
-/* adslAturIntervalTable Flags */
-#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */
-#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */
-#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */
-#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */
-#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */
-
-/* adslAtucChanPerfDataTable Flags */
-#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
-#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
-#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
-#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
-#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-
-/* adslAturChanPerfDataTable Flags */
-#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
-#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
-#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-/* adslAtucChanIntervalTable Flags */
-#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */
-#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
-#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
-#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
-#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
-
-/* adslAturChanIntervalTable Flags */
-#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */
-#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */
-#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */
-#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */
-#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */
-#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */
-
-/* adslLineAlarmConfProfileTable Flags */
-#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */
-#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */
-#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */
-#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */
-#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */
-#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */
-#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */
-#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */
-#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */
-#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */
-#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */
-#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */
-#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */
-#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */
-#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */
-#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */
-#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */
-
-
-/* adslAturTraps Flags */
-#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */
-#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */
-#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */
-#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */
-#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */
-#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */
-
-//RFC- 3440 FLAG DEFINITIONS
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-/* adslLineExtTable flags */
-#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */
-#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data)
-#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */
-#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data)
-#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */
-#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data)
-
-/* adslAtucPerfDataExtTable flags */
-#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */
-#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */
-#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
-#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */
-#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
-#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */
-#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */
-#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */
-#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */
-#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */
-#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */
-#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */
-#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */
-#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */
-
-/* adslAturPerfDataExtTable */
-#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */
-#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)
-#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */
-#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
-#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */
-#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */
-#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */
-#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */
-#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */
-#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */
-
-/* adslAutcIntervalExtTable flags */
-#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */
-#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */
-#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */
-#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */
-
-/* adslAturIntervalExtTable */
-#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */
-#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */
-
-/* adslAlarmConfProfileExtTable */
-#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
-#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */
-#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */
-#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */
-#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */
-
-/* adslAturExtTraps */
-#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */
-#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */
-#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */
-#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */
-#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */
-
-// 603221:tc.chen start
-/* adslLineStatus Flags */
-#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */
-#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data)
-#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */
-#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data)
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data)
-#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */
-#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data)
-
-/* adslLineRate Flags */
-#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data)
-
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data)
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data)
-
-#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data)
-
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data)
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data)
-
-#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */
-#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data)
-
-#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */
-#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data)
-
-/* adslLineInformation Flags */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data)
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data)
-#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */
-#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data)
-#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */
-#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data)
-#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */
-#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data)
-#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */
-#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */
-#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data)
-#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */
-#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data)
-#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */
-#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data)
-#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */
-#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data)
-
-/* adslNearEndPerformanceStats Flags */
-#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data)
-#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data)
-#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */
-#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data)
-#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */
-#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */
-#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */
-#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */
-#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */
-#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */
-#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data)
-#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data)
-#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */
-#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data)
-#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */
-#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data)
-#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */
-#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data)
-#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */
-#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data)
-#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */
-#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data)
-#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */
-#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data)
-#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data)
-#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */
-
-/* adslFarEndPerformanceStats Flags */
-#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data)
-#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */
-#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */
-#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */
-#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */
-#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */
-#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data)
-#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data)
-#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */
-#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data)
-#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data)
-#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */
-#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data)
-#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */
-#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data)
-#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */
-#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data)
-#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */
-#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data)
-#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */
-#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data)
-#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */
-#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data)
-#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data)
-#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */
-// 603221:tc.chen end
-/* TR-69 related additional parameters - defines */
-/* Defines for struct adslATURSubcarrierInfo */
-#define NEAREND_HLINSC 0x1
-#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data)
-#define NEAREND_HLINPS 0x2
-#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data)
-#define NEAREND_HLOGMT 0x4
-#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data)
-#define NEAREND_HLOGPS 0x8
-#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data)
-#define NEAREND_QLNMT 0x10
-#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data)
-#define NEAREND_QLNPS 0x20
-#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data)
-#define NEAREND_SNRMT 0x40
-#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data)
-#define NEAREND_SNRPS 0x80
-#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data)
-#define NEAREND_BITPS 0x100
-#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data)
-#define NEAREND_GAINPS 0x200
-#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data)
-
-/* Defines for struct adslATUCSubcarrierInfo */
-#define FAREND_HLINSC 0x1
-#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 0, 1, data)
-#define FAREND_HLINPS 0x2
-#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data)
-#define FAREND_HLOGMT 0x4
-#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data)
-#define FAREND_HLOGPS 0x8
-#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data)
-#define FAREND_QLNMT 0x10
-#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data)
-#define FAREND_QLNPS 0x20
-#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data)
-#define FAREND_SNRMT 0x40
-#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data)
-#define FAREND_SNRPS 0x80
-#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data)
-#define FAREND_BITPS 0x100
-#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data)
-#define FAREND_GAINPS 0x200
-#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data)
-
-
-// GET_ADSL_POWER_SPECTRAL_DENSITY
-#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data)
-#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data)
-#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data)
-#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data)
-#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data)
-#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data)
-
-
-#endif
-/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
-
-#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val))
-// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
-
-#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
-// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
-
-
-#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit))
-// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
-
-
-////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
-
-//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
- //
-#define u32 unsigned int
-#define u16 unsigned short
-#define s16 short
-#define u8 unsigned char
-
-
-typedef u32 AdslPerfTimeElapsed;
-typedef u32 AdslPerfPrevDayCount;
-typedef u32 PerfCurrentCount;
-typedef u32 PerfIntervalCount;
-typedef u32 AdslPerfCurrDayCount;
-
-
-//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
-
-typedef struct adslLineTableEntry {
- int ifIndex;
- int adslLineCode;
- u8 flags;
-} adslLineTableEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslLineExtTableEntry {
- int ifIndex;
- u16 adslLineTransAtucCap;
- u16 adslLineTransAtucConfig;
- u16 adslLineTransAtucActual;
- int adslLineGlitePowerState;
- u32 flags;
-}adslLineExtTableEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry)
-
-typedef struct adslVendorId {
- u16 country_code;
- u_char provider_id[4]; /* Ascii characters */
- u_char revision_info[2];
-}adslVendorId;
-
-
-typedef struct adslAtucPhysEntry {
- int ifIndex;
- char serial_no[32];
- union {
- char vendor_id[16];
- adslVendorId vendor_info;
- } vendor_id;
-
- char version_no[16];
- u32 status;
- int outputPwr;
- u32 attainableRate;
- u8 flags;
-} adslAtucPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry)
-
-typedef struct adslAturPhysEntry {
- int ifIndex;
- char serial_no[32];
- union {
- char vendor_id[16];
- adslVendorId vendor_info;
- } vendor_id;
- char version_no[16];
- int SnrMgn;
- u32 Attn;
- u32 status;
- int outputPwr;
- u32 attainableRate;
- u8 flags;
-} adslAturPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
-
-typedef struct adslAtucChanInfo {
- int ifIndex;
- u32 interleaveDelay;
- u32 currTxRate;
- u32 prevTxRate;
- u8 flags;
-} adslAtucChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
-
-typedef struct adslAturChanInfo {
- int ifIndex;
- u32 interleaveDelay;
- u32 currTxRate;
- u32 prevTxRate;
- u32 crcBlkLen;
- u8 flags;
-} adslAturChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry)
-
-typedef struct atucPerfDataEntry
-{
- int ifIndex;
- u32 adslAtucPerfLofs;
- u32 adslAtucPerfLoss;
- u32 adslAtucPerfESs;
- u32 adslAtucPerfInits;
- int adslAtucPerfValidIntervals;
- int adslAtucPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAtucPerfCurr15MinLofs;
- PerfCurrentCount adslAtucPerfCurr15MinLoss;
- PerfCurrentCount adslAtucPerfCurr15MinESs;
- PerfCurrentCount adslAtucPerfCurr15MinInits;
- AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
- AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
- int adslAtucPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
- AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
- u32 flags;
-} atucPerfDataEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct atucPerfDataExtEntry
- {
- int ifIndex;
- u32 adslAtucPerfStatFastR;
- u32 adslAtucPerfStatFailedFastR;
- u32 adslAtucPerfStatSesL;
- u32 adslAtucPerfStatUasL;
- u32 adslAtucPerfCurr15MinFastR;
- u32 adslAtucPerfCurr15MinFailedFastR;
- u32 adslAtucPerfCurr15MinSesL;
- u32 adslAtucPerfCurr15MinUasL;
- u32 adslAtucPerfCurr1DayFastR;
- u32 adslAtucPerfCurr1DayFailedFastR;
- u32 adslAtucPerfCurr1DaySesL;
- u32 adslAtucPerfCurr1DayUasL;
- u32 adslAtucPerfPrev1DayFastR;
- u32 adslAtucPerfPrev1DayFailedFastR;
- u32 adslAtucPerfPrev1DaySesL;
- u32 adslAtucPerfPrev1DayUasL;
- u32 flags;
-} atucPerfDataExtEntry;
-
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
-
-typedef struct aturPerfDataEntry
-{
- int ifIndex;
- u32 adslAturPerfLofs;
- u32 adslAturPerfLoss;
- u32 adslAturPerfLprs;
- u32 adslAturPerfESs;
- int adslAturPerfValidIntervals;
- int adslAturPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAturPerfCurr15MinLofs;
- PerfCurrentCount adslAturPerfCurr15MinLoss;
- PerfCurrentCount adslAturPerfCurr15MinLprs;
- PerfCurrentCount adslAturPerfCurr15MinESs;
- AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
- AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
- AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
- int adslAturPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
- AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
- AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
- u32 flags;
-} aturPerfDataEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct aturPerfDataExtEntry
- {
- int ifIndex;
- u32 adslAturPerfStatSesL;
- u32 adslAturPerfStatUasL;
- u32 adslAturPerfCurr15MinSesL;
- u32 adslAturPerfCurr15MinUasL;
- u32 adslAturPerfCurr1DaySesL;
- u32 adslAturPerfCurr1DayUasL;
- u32 adslAturPerfPrev1DaySesL;
- u32 adslAturPerfPrev1DayUasL;
- u32 flags;
-} aturPerfDataExtEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
-
-typedef struct adslAtucIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount intervalLOF;
- PerfIntervalCount intervalLOS;
- PerfIntervalCount intervalES;
- PerfIntervalCount intervalInits;
- int intervalValidData;
- u8 flags;
-} adslAtucIntvlInfo;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslAtucInvtlExtInfo
- {
- int ifIndex;
- int IntervalNumber;
- u32 adslAtucIntervalFastR;
- u32 adslAtucIntervalFailedFastR;
- u32 adslAtucIntervalSesL;
- u32 adslAtucIntervalUasL;
- u32 flags;
-} adslAtucInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
-
-typedef struct adslAturIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount intervalLOF;
- PerfIntervalCount intervalLOS;
- PerfIntervalCount intervalLPR;
- PerfIntervalCount intervalES;
- int intervalValidData;
- u8 flags;
-} adslAturIntvlInfo;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslAturInvtlExtInfo
- {
- int ifIndex;
- int IntervalNumber;
- u32 adslAturIntervalSesL;
- u32 adslAturIntervalUasL;
- u32 flags;
-} adslAturInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry)
-
-typedef struct atucChannelPerfDataEntry
-{
- int ifIndex;
- u32 adslAtucChanReceivedBlks;
- u32 adslAtucChanTransmittedBlks;
- u32 adslAtucChanCorrectedBlks;
- u32 adslAtucChanUncorrectBlks;
- int adslAtucChanPerfValidIntervals;
- int adslAtucChanPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks;
- PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks;
- AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
- AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
- int adslAtucChanPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
- AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
- u32 flags;
-}atucChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry)
-
-typedef struct aturChannelPerfDataEntry
-{
- int ifIndex;
- u32 adslAturChanReceivedBlks;
- u32 adslAturChanTransmittedBlks;
- u32 adslAturChanCorrectedBlks;
- u32 adslAturChanUncorrectBlks;
- int adslAturChanPerfValidIntervals;
- int adslAturChanPerfInvalidIntervals;
- AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed;
- PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks;
- PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks;
- AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
- AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
- int adslAturChanPerfPrev1DayMoniSecs;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
- AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
- u32 flags;
-} aturChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
-
-typedef struct adslAtucChanIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount chanIntervalRecvdBlks;
- PerfIntervalCount chanIntervalXmitBlks;
- PerfIntervalCount chanIntervalCorrectedBlks;
- PerfIntervalCount chanIntervalUncorrectBlks;
- int intervalValidData;
- u8 flags;
-} adslAtucChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
-
-typedef struct adslAturChanIntvlInfo {
- int ifIndex;
- int IntervalNumber;
- PerfIntervalCount chanIntervalRecvdBlks;
- PerfIntervalCount chanIntervalXmitBlks;
- PerfIntervalCount chanIntervalCorrectedBlks;
- PerfIntervalCount chanIntervalUncorrectBlks;
- int intervalValidData;
- u8 flags;
-} adslAturChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
-//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry)
-
-typedef struct adslLineAlarmConfProfileEntry
- {
- unsigned char adslLineAlarmConfProfileName[32];
- int adslAtucThresh15MinLofs;
- int adslAtucThresh15MinLoss;
- int adslAtucThresh15MinESs;
- u32 adslAtucThreshFastRateUp;
- u32 adslAtucThreshInterleaveRateUp;
- u32 adslAtucThreshFastRateDown;
- u32 adslAtucThreshInterleaveRateDown;
- int adslAtucInitFailureTrapEnable;
- int adslAturThresh15MinLofs;
- int adslAturThresh15MinLoss;
- int adslAturThresh15MinLprs;
- int adslAturThresh15MinESs;
- u32 adslAturThreshFastRateUp;
- u32 adslAturThreshInterleaveRateUp;
- u32 adslAturThreshFastRateDown;
- u32 adslAturThreshInterleaveRateDown;
- int adslLineAlarmConfProfileRowStatus;
- u32 flags;
-} adslLineAlarmConfProfileEntry;
-
-#ifdef AMAZON_MEI_MIB_RFC3440
-typedef struct adslLineAlarmConfProfileExtEntry
- {
- u8 adslLineAlarmConfProfileExtName[32];
- u32 adslAtucThreshold15MinFailedFastR;
- u32 adslAtucThreshold15MinSesL;
- u32 adslAtucThreshold15MinUasL;
- u32 adslAturThreshold15MinSesL;
- u32 adslAturThreshold15MinUasL;
- u32 flags;
-} adslLineAlarmConfProfileExtEntry;
-#endif
-//TRAPS
-
-// 603221:tc.chen start
-/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
-typedef struct adslLineStatus
- {
- int adslModemStatus;
- u32 adslModeSelected;
- int adslAtucThresh15MinESs;
- int adslTrellisCodeEnable;
- int adslLatency;
- u8 flags;
- } adslLineStatusInfo;
-
-typedef struct adslLineRate
- {
- u32 adslDataRateds;
- u32 adslDataRateus;
- u32 adslATTNDRds;
- u32 adslATTNDRus;
- u8 flags;
- } adslLineRateInfo;
-
-typedef struct adslLineInfo
- {
- u32 adslInterleaveDepthds;
- u32 adslInterleaveDepthus;
- u32 adslLATNds;
- u32 adslLATNus;
- u32 adslSATNds;
- u32 adslSATNus;
- int adslSNRMds;
- int adslSNRMus;
- int adslACATPds;
- int adslACATPus;
- u32 flags;
- } adslLineInfo;
-
-typedef struct adslNearEndPerfStats
- {
- u32 adslSuperFrames;
- u32 adslneLOS;
- u32 adslneLOF;
- u32 adslneLPR;
- u32 adslneNCD;
- u32 adslneLCD;
- u32 adslneCRC;
- u32 adslneRSCorr;
- u32 adslneFECS;
- u32 adslneES;
- u32 adslneSES;
- u32 adslneLOSS;
- u32 adslneUAS;
- u32 adslneHECErrors;
- u32 flags;
- } adslNearEndPerfStats;
-
-typedef struct adslFarEndPerfStats
- {
- u32 adslfeLOS;
- u32 adslfeLOF;
- u32 adslfeLPR;
- u32 adslfeNCD;
- u32 adslfeLCD;
- u32 adslfeCRC;
- u32 adslfeRSCorr;
- u32 adslfeFECS;
- u32 adslfeES;
- u32 adslfeSES;
- u32 adslfeLOSS;
- u32 adslfeUAS;
- u32 adslfeHECErrors;
- u32 flags;
- } adslFarEndPerfStats;
-// 603221:tc.chen end
-
-/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
-typedef struct adslATURSubcarrierInfo {
- int ifindex;
- u16 HLINSCds;
- u16 HLINpsds[1024];/* Even index = real part; Odd Index
- = imaginary part for each tone */
- u16 HLOGMTds;
- u16 HLOGpsds[512];
- u16 QLNMTds;
- u16 QLNpsds[512];
- u16 SNRMTds;
- u16 SNRpsds[512];
- u16 BITpsds[512];
- u16 GAINpsds[512];
- u16 flags;
-}adslATURSubcarrierInfo;
-
-typedef struct adslATUCSubcarrierInfo {
- int ifindex;
- u16 HLINSCus;
- u16 HLINpsus[128];/* Even index = real part; Odd Index
- = imaginary part for each tone */
- u16 HLOGMTus;
- u16 HLOGpsus[64];
- u16 QLNMTus;
- u16 QLNpsus[64];
- u16 SNRMTus;
- u16 SNRpsus[64];
- u16 BITpsus[64];
- u16 GAINpsus[64];
- u16 flags;
-}adslATUCSubcarrierInfo;
-
-#ifndef u_int16
-#define u_int16 u16
-#endif
-
-typedef struct adslInitStats {
- u_int16 FullInitializationCount;
- u_int16 FailedFullInitializationCount;
- u_int16 LINIT_Errors;
- u_int16 Init_Timeouts;
-}adslInitStats;
-
-typedef struct adslPowerSpectralDensity {
- int ACTPSDds;
- int ACTPSDus;
-}adslPowerSpectralDensity;
-
-
-//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags)
-typedef union structpts {
- adslLineTableEntry * adslLineTableEntry_pt;
- adslAtucPhysEntry * adslAtucPhysEntry_pt;
- adslAturPhysEntry * adslAturPhysEntry_pt;
- adslAtucChanInfo * adslAtucChanInfo_pt;
- adslAturChanInfo * adslAturChanInfo_pt;
- atucPerfDataEntry * atucPerfDataEntry_pt;
- aturPerfDataEntry * aturPerfDataEntry_pt;
- adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
- adslAturIntvlInfo * adslAturIntvlInfo_pt;
- atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
- aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
- adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
- adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
- adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
- // RFC 3440
-
- #ifdef AMAZON_MEI_MIB_RFC3440
- adslLineExtTableEntry * adslLineExtTableEntry_pt;
- atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
- adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
- aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
- adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
- adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
- #endif
-// 603221:tc.chen start
- adslLineStatusInfo * adslLineStatusInfo_pt;
- adslLineRateInfo * adslLineRateInfo_pt;
- adslLineInfo * adslLineInfo_pt;
- adslNearEndPerfStats * adslNearEndPerfStats_pt;
- adslFarEndPerfStats * adslFarEndPerfStats_pt;
-// 603221:tc.chen end
- adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt;
- adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt;
- adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
-}structpts;
-
-#endif /* ] __AMAZON_MEI_APP_IOCTL_H */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h
deleted file mode 100644
index 02a150eac4..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h
+++ /dev/null
@@ -1,757 +0,0 @@
-//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl
-#ifndef _AMAZON_MEI_IOCTL_H
-#define _AMAZON_MEI_IOCTL_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#define PCM_BUFF_SIZE 1024 //bytes
-// interrupt numbers
-
-#ifndef _AMAZON_ADSL_APP
-
-typedef struct pcm_data_struct{
- u16 S;
- u16 temp;
- u16 LSW;
- u16 MSW;
- u16 len;
- u16 rdindex;
- u16 wrindex;
- u16 flow;
-
- int finish;
- u8 buff[PCM_BUFF_SIZE];
- int point;
-}pcm_data_struct;
-
-typedef struct amazon_clreoc_pkt{
- struct list_head list;
- u8 * command; //point to clreoc command data
- int len; //command length
-}amazon_clreoc_pkt;
-
-// Number of intervals
-#define INTERVAL_NUM 192 //two days
-typedef struct amazon_mei_mib{
- struct list_head list;
- struct timeval start_time; //start of current interval
-
- int AtucPerfLof;
- int AtucPerfLos;
- int AtucPerfEs;
- int AtucPerfInit;
-
- int AturPerfLof;
- int AturPerfLos;
- int AturPerfLpr;
- int AturPerfEs;
-
- int AturChanPerfRxBlk;
- int AturChanPerfTxBlk;
- int AturChanPerfCorrBlk;
- int AturChanPerfUncorrBlk;
-
- //RFC-3440
- int AtucPerfStatFastR;
- int AtucPerfStatFailedFastR;
- int AtucPerfStatSesL;
- int AtucPerfStatUasL;
- int AturPerfStatSesL;
- int AturPerfStatUasL;
-}amazon_mei_mib;
-
-typedef struct adslChanPrevTxRate{
- u32 adslAtucChanPrevTxRate;
- u32 adslAturChanPrevTxRate;
-}adslChanPrevTxRate;
-
-typedef struct adslPhysCurrStatus{
- u32 adslAtucCurrStatus;
- u32 adslAturCurrStatus;
-}adslPhysCurrStatus;
-
-typedef struct ChanType{
- int interleave;
- int fast;
-// 603221:tc.chen start
- int bearchannel0;
- int bearchannel1;
-// 603221:tc.chen end
-}ChanType;
-
-typedef struct mib_previous_read{
- u16 ATUC_PERF_ESS;
- u16 ATUR_PERF_ESS;
- u32 ATUR_CHAN_RECV_BLK;
- u16 ATUR_CHAN_CORR_BLK_INTL;
- u16 ATUR_CHAN_CORR_BLK_FAST;
- u16 ATUR_CHAN_UNCORR_BLK_INTL;
- u16 ATUR_CHAN_UNCORR_BLK_FAST;
- u16 ATUC_PERF_STAT_FASTR;
- u16 ATUC_PERF_STAT_FAILED_FASTR;
- u16 ATUC_PERF_STAT_SESL;
- u16 ATUC_PERF_STAT_UASL;
- u16 ATUR_PERF_STAT_SESL;
-}mib_previous_read;
-
-typedef struct mib_flags_pretime{
- struct timeval ATUC_PERF_LOSS_PTIME;
- struct timeval ATUC_PERF_LOFS_PTIME;
- struct timeval ATUR_PERF_LOSS_PTIME;
- struct timeval ATUR_PERF_LOFS_PTIME;
- struct timeval ATUR_PERF_LPR_PTIME;
-}mib_flags_pretime;
-
- // cmv message structures
-#define MP_PAYLOAD_SIZE 12
-typedef struct mpmessage{
- u16 iFunction;
- u16 iGroup;
- u16 iAddress;
- u16 iIndex;
- u16 iPayload[MP_PAYLOAD_SIZE];
-}MPMessage;
-#endif
-
-
-typedef struct meireg{
- u32 iAddress;
- u32 iData;
-}meireg;
-
-#define MEIDEBUG_BUFFER_SIZES 50
-typedef struct meidebug{
- u32 iAddress;
- u32 iCount;
- u32 buffer[MEIDEBUG_BUFFER_SIZES];
-}meidebug;
-
-//==============================================================================
-// Group definitions
-//==============================================================================
-#define OPTN 5
-#define CNFG 8
-#define CNTL 1
-#define STAT 2
-#define RATE 6
-#define PLAM 7
-#define INFO 3
-#define TEST 4
-//==============================================================================
-// Opcode definitions
-//==============================================================================
-#define H2D_CMV_READ 0x00
-#define H2D_CMV_WRITE 0x04
-#define H2D_CMV_INDICATE_REPLY 0x10
-#define H2D_ERROR_OPCODE_UNKNOWN 0x20
-#define H2D_ERROR_CMV_UNKNOWN 0x30
-
-#define D2H_CMV_READ_REPLY 0x01
-#define D2H_CMV_WRITE_REPLY 0x05
-#define D2H_CMV_INDICATE 0x11
-#define D2H_ERROR_OPCODE_UNKNOWN 0x21
-#define D2H_ERROR_CMV_UNKNOWN 0x31
-#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41
-#define D2H_ERROR_CMV_WRITE_ONLY 0x51
-#define D2H_ERROR_CMV_READ_ONLY 0x61
-
-#define H2D_DEBUG_READ_DM 0x02
-#define H2D_DEBUG_READ_PM 0x06
-#define H2D_DEBUG_WRITE_DM 0x0a
-#define H2D_DEBUG_WRITE_PM 0x0e
-
-#define D2H_DEBUG_READ_DM_REPLY 0x03
-#define D2H_DEBUG_READ_FM_REPLY 0x07
-#define D2H_DEBUG_WRITE_DM_REPLY 0x0b
-#define D2H_DEBUG_WRITE_FM_REPLY 0x0f
-#define D2H_ERROR_ADDR_UNKNOWN 0x33
-
-#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1
-//==============================================================================
-// INFO register address field definitions
-//==============================================================================
-
-#define INFO_TxState 0
-#define INFO_RxState 1
-#define INFO_TxNextState 2
-#define INFO_RxNextState 3
-#define INFO_TxStateJumpFrom 4
-#define INFO_RxStateJumpFrom 5
-
-#define INFO_ReverbSnrBuf 8
-#define INFO_ReverbEchoSnrBuf 9
-#define INFO_MedleySnrBuf 10
-#define INFO_RxShowtimeSnrBuf 11
-#define INFO_DECdelay 12
-#define INFO_DECExponent 13
-#define INFO_DECTaps 14
-#define INFO_AECdelay 15
-#define INFO_AECExponent 16
-#define INFO_AECTaps 17
-#define INFO_TDQExponent 18
-#define INFO_TDQTaps 19
-#define INFO_FDQExponent 20
-#define INFO_FDQTaps 21
-#define INFO_USBat 22
-#define INFO_DSBat 23
-#define INFO_USFineGains 24
-#define INFO_DSFineGains 25
-#define INFO_BitloadFirstChannel 26
-#define INFO_BitloadLastChannel 27
-#define INFO_PollEOCData 28 // CO specific
-#define INFO_CSNRMargin 29 // CO specific
-#define INFO_RCMsgs1 30
-#define INFO_RMsgs1 31
-#define INFO_RMsgRA 32
-#define INFO_RCMsgRA 33
-#define INFO_RMsg2 34
-#define INFO_RCMsg2 35
-#define INFO_BitLoadOK 36
-#define INFO_RCRates1 37
-#define INFO_RRates1Tab 38
-#define INFO_RMsgs1Tab 39
-#define INFO_RMsgRATab 40
-#define INFO_RRatesRA 41
-#define INFO_RCRatesRA 42
-#define INFO_RRates2 43
-#define INFO_RCRates2 44
-#define INFO_PackedRMsg2 45
-#define INFO_RxBitSwapFlag 46
-#define INFO_TxBitSwapFlag 47
-#define INFO_ShowtimeSNRUpdateCount 48
-#define INFO_ShowtimeFDQUpdateCount 49
-#define INFO_ShowtimeDECUpdateCount 50
-#define INFO_CopyRxBuffer 51
-#define INFO_RxToneBuf 52
-#define INFO_TxToneBuf 53
-#define INFO_Version 54
-#define INFO_TimeStamp 55
-#define INFO_feVendorID 56
-#define INFO_feSerialNum 57
-#define INFO_feVersionNum 58
-#define INFO_BulkMemory 59 //Points to start of bulk memory
-#define INFO_neVendorID 60
-#define INFO_neVersionNum 61
-#define INFO_neSerialNum 62
-
-//==============================================================================
-// RATE register address field definitions
-//==============================================================================
-
-
-#define RATE_UsRate 0
-#define RATE_DsRate 1
-
-
-//==============================================================================
-// PLAM (Physical Layer Management) register address field definitions
-// (See G997.1 for reference)
-//==============================================================================
-
-
- // ///
- // Failure Flags ///
- // ///
-
-#define PLAM_NearEndFailureFlags 0
-#define PLAM_FarEndFailureFlags 1
-
- // ///
- // Near End Failure Flags Bit Definitions ///
- // ///
-
-// ADSL Failures ///
-#define PLAM_LOS_FailureBit 0x0001
-#define PLAM_LOF_FailureBit 0x0002
-#define PLAM_LPR_FailureBit 0x0004
-#define PLAM_RFI_FailureBit 0x0008
-
-// ATM Failures ///
-#define PLAM_NCD_LP0_FailureBit 0x0010
-#define PLAM_NCD_LP1_FailureBit 0x0020
-#define PLAM_LCD_LP0_FailureBit 0x0040
-#define PLAM_LCD_LP1_FailureBit 0x0080
-
-#define PLAM_NCD_BC0_FailureBit 0x0100
-#define PLAM_NCD_BC1_FailureBit 0x0200
-#define PLAM_LCD_BC0_FailureBit 0x0400
-#define PLAM_LCD_BC1_FailureBit 0x0800
- // ///
- // Performance Counts ///
- // ///
-
-#define PLAM_NearEndCrcCnt 2
-#define PLAM_CorrectedRSErrors 3
-
-#define PLAM_NearEndECSCnt 6
-#define PLAM_NearEndESCnt 7
-#define PLAM_NearEndSESCnt 8
-#define PLAM_NearEndLOSSCnt 9
-#define PLAM_NearEndUASLCnt 10
-
-#define PLAM_NearEndHECErrCnt 11
-
-#define PLAM_NearEndHECTotCnt 16
-#define PLAM_NearEndCellTotCnt 18
-#define PLAM_NearEndSfCntLSW 20
-#define PLAM_NearEndSfCntMSW 21
-
-#define PLAM_FarEndFebeCnt 24
-
-#define PLAM_FarEndFecCnt 28
-
-#define PLAM_FarEndFECSCnt 32
-#define PLAM_FarEndESCnt 33
-#define PLAM_FarEndSESCnt 34
-#define PLAM_FarEndLOSSCnt 35
-#define PLAM_FarEndUASLCnt 36
-
-#define PLAM_FarEndHECErrCnt 37
-
-#define PLAM_FarEndHECTotCnt 41
-
-#define PLAM_FarEndCellTotCnt 43
-
-#define PLAM_LineAttn 45
-#define PLAM_SNRMargin 46
-
-
-//==============================================================================
-// CNTL register address and bit field definitions
-//==============================================================================
-
-
-#define CNTL_ModemControl 0
-
-#define CNTL_ModemReset 0x0
-#define CNTL_ModemStart 0x2
-
-
-//==============================================================================
-// STAT register address and bit field definitions
-//==============================================================================
-
-#define STAT_MacroState 0
-#define STAT_Mode 1
-#define STAT_DMTFramingMode 2
-#define STAT_SleepState 3
-#define STAT_Misc 4
-#define STAT_FailureState 5
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- //16-bit STAT_OLRStatus_DS
- // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- // [3:2]: Reserved
- // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- // [7:6]: Reserved
- // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits).
- // [11]: 1=Receive Response, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRStatus_DS 6
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- // 16-bit STAT_OLRStatus_US CMV
- // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- // [3:2]: Reserved
- // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- // [7:6]: Reserved
- // [8]: 1=Request Received. 0=not.
- // [10:9]: Reserved
- // [11]: 1=Response Sent, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-///
-#define STAT_OLRStatus_US 7
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_PMStatus provides status of PM
- // 16-bit STAT_PMStatus CMV
- // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
- // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM
- // [3]: Reserved
- // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
- // [7:6]: Reserved
- // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits).
- // [11]: 1=Response, 0=not
- // [15:12]: Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_PMStatus 8
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
- // [3:0]: OLR/PM response reason code
- // [7:4]: OLR/PM Internal error code
- // [15:8]: OLR/PM Reserved for future
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRError_DS 9
-#define STAT_OLRError_US 10
-#define STAT_PMError 11
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_MacroState
-// MacroState reflects the high level state of the modem
-
-#define STAT_InitState 0x0000
-#define STAT_ReadyState 0x0001
-#define STAT_FailState 0x0002
-#define STAT_IdleState 0x0003
-#define STAT_QuietState 0x0004
-#define STAT_GhsState 0x0005
-#define STAT_FullInitState 0x0006
-#define STAT_ShowTimeState 0x0007
-#define STAT_FastRetrainState 0x0008
-#define STAT_LoopDiagMode 0x0009
-#define STAT_ShortInit 0x000A // Bis short initialization ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Mode
-// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
-// G.Hs or some other mechanism to negotiate the specific mode of operation.
-// The OPTN_modeControl CMV is used to select a set of desired modes.
-// The STAT_Mode CMV indicates which mode was actually selected.
-
-#define STAT_ConfigMode_T1413 0x0001
-#define STAT_ConfigMode_G992_2_AB 0x0002
-#define STAT_ConfigMode_G992_1_A 0x0004
-#define STAT_ConfigMode_G992_1_B 0x0008
-#define STAT_ConfigMode_G992_1_C 0x0010
-#define STAT_ConfigMode_G992_2_C 0x0020
-
-#define STAT_ConfigMode_G992_3_A 0x0100
-#define STAT_ConfigMode_G992_3_B 0x0200
-#define STAT_ConfigMode_G992_3_I 0x0400
-#define STAT_ConfigMode_G992_3_J 0x0800
-#define STAT_ConfigMode_G992_3_L 0x1000
-
-#define STAT_ConfigMode_G992_4_A 0x2000
-#define STAT_ConfigMode_G992_4_I 0x4000
-
-#define STAT_ConfigMode_G992_5 0x8000
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_DMTFramingMode
-// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
-// status is not applicable in BIS mode and its value is undefined
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_FramingModeMask 0x0003
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Misc
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OverlappedSpectrum 0x0008
-#define STAT_TCM 0x0010
-#define STAT_TDQ_at_1104 0x0020
-#define STAT_T1413_Signal_Detected 0x0040
-#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1
-#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_FailureState
-// when the MacroSTate indicates the fail state, FailureState provides a failure code
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-#define E_CODE_NO_ERROR 0
-#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */
-#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */
-#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */
-#define E_CODE_TX_AOC_FIFO_OVERFLOW 4
-#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/
-#define E_CODE_BITLOAD 6 // bit loading fails */
-#define E_CODE_ST_ERROR 7 // showtime CRC error */
-#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */
-#define E_CODE_C_TONES 9 // detected C_TONES */
-#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */
-#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */
-#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */
-#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */
-#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */
-#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */
-#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */
-#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */
-#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */
-#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */
-#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */
-#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */
-#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */
-#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */
-#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */
-#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */
-#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */
-#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */
-#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */
-#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */
-#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */
-#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
-#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */
-#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */
-#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */
-#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */
-#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
-#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */
-#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
-#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */
-#define E_CODE_BAD_MEM_ACCESS 46
-#define E_CODE_BAD_INSTRUCTION_ACCESS 47
-#define E_CODE_TX_EOC_FIFO_OVERFLOW 48
-#define E_CODE_RX_EOC_FIFO_OVERFLOW 49
-#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//STAT_OLRStatus:
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OLRPM_IDLE 0x0000
-#define STAT_OLRPM_IN_PROGRESS 0x0001
-#define STAT_OLRPM_COMPLETE 0x0002
-#define STAT_OLRPM_ABORTED 0x0003
-#define STAT_OLRPM_RESPONSE 0x0800
-
-#define STAT_OLR_BITSWAP 0x0010
-#define STAT_OLR_DRR 0x0020
-#define STAT_OLR_SRA 0x0030
-
-//STAT_PMStatus_US:
-#define STAT_PM_CO_REQ 0x0004
-#define STAT_PM_SIMPLE_REQ 0x0010
-#define STAT_PM_L2_REQ 0x0020
-#define STAT_PM_L2_TRIM_REQ 0x0030
-
-// STAT_OLRError_DS, STAT_OLRError_US
-//4 bit response reason code:
-#define RESP_BUSY 0x01
-#define RESP_INVALID_PARAMETERS 0x02
-#define RESP_NOT_ENABLED 0x03
-#define RESP_NOT_SUPPORTED 0x04
-
-//4 bit internal error code (common for OLR and PM)
-#define REQ_INVALID_BiGi 0x10
-#define REQ_INVALID_Lp 0x20
-#define REQ_INVALID_Bpn 0x30
-#define REQ_INVALID_FRAMING_CONSTRAINT 0x40
-#define REQ_NOT_IN_L0_STATE 0x50
-#define REQ_NOT_IN_L2_STATE 0x60
-#define REQ_INVALID_PCB 0x70
-#define REQ_VIOLATES_MARGIN 0x80
-
-//STAT_PMError
-//4 bit response reason code:
-#define RESP_STATE_NOT_DESIRED 0x03
-#define RESP_INFEASIBLE_PARAMETERS 0x04
-
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN register address and bit field definitions
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_ModeControl 0
-#define OPTN_DMTLnkCtl 1
-// Reserved 2
-#define OPTN_GhsControl 3
-// Reserved 4
-#define OPTN_PwrManControl 5
-#define OPTN_AnnexControl 6
-#define OPTN_ModeControl1 7
-// Reserved 8
-#define OPTN_StateMachineCtrl 9
-// Reserved 10
-// Reserved 11
-#define OPTN_BisLinkControl 12
-#define OPTN_ATMAddrConfig 13
-#define OPTN_ATMNumCellConfig 14
-
-// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
-// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
-// The OPTN_ModeControl CMV is used to select a set of desired modes ///
-// The STAT_ModeControl CMV indicates which mode was actually selected ///
-
-// OPTN_ModeControl
-#define OPTN_ConfigMode_T1413 0x0001
-#define OPTN_ConfigMode_G992_2_AB 0x0002
-#define OPTN_ConfigMode_G992_1_A 0x0004
-#define OPTN_ConfigMode_G992_1_B 0x0008
-#define OPTN_ConfigMode_G992_1_C 0x0010
-#define OPTN_ConfigMode_G992_2_C 0x0020
-
-#define OPTN_ConfigMode_G992_3_A 0x0100
-#define OPTN_ConfigMode_G992_3_B 0x0200
-#define OPTN_ConfigMode_G992_3_I 0x0400
-#define OPTN_ConfigMode_G992_3_J 0x0800
-#define OPTN_ConfigMode_G992_3_L 0x1000
-
-#define OPTN_ConfigMode_G992_4_A 0x2000
-#define OPTN_ConfigMode_G992_4_I 0x4000
-
-#define OPTN_ConfigMode_G992_5 0x8000
-
-// OPTN_PwrManControl
-#define OPTN_PwrManWakeUpGhs 0x1
-#define OPTN_PwrManWakeUpFR 0x2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_DMT Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_DMT_DualLatency_Dis 0x200
-#define OPTN_DMT_S_Dis 0x100
-#define OPTN_DMT_FRAMINGMODE 0x1
-#define OPTN_DMT_FRAMINGMODE_MASK 0x7
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_BIS Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_BisLinkContrl_LineProbeDis 0x1
-#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2
-#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_GhsControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//
-// for OPTN_GhsControl, we will assign 16bit word as follows
-// bit 0~3: set the control over which start(initial) message CPE will send:
-//
-// BIT: 2 1 0
-// 0 0 1 CLR
-// 0 1 0 MR
-// 0 1 1 MS
-// 1 0 0 MP
-//
-// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
-// BIT: 5 4
-// 0 1 MS
-// 1 0 MR
-// 1 1 MP
-//
-// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default.
-// BIT: 15
-// 1 means session one
-//
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_GHS_ST_GHS 0x8000
-#define OPTN_GHS_INIT_MASK 0x000F
-#define OPTN_GHS_RESP_MASK 0x00F0
-
-#define OPTN_RTInitTxMsg_CLR 0x0001
-#define OPTN_RTInitTxMsg_MR 0x0002
-#define OPTN_RTInitTxMsg_MS 0x0003
-#define OPTN_RTInitTxMsg_MP 0x0004
-
-#define OPTN_RTRespTxMsg_MS 0x0010
-#define OPTN_RTRespTxMsg_MR 0x0020
-#define OPTN_RTRespTxMsg_MP 0x0030
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_AnnexControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-// G.992.3 Annex A/L1/L2 US PSD Mask preferred
-
-#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000
-#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask ///
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMAddrConfig
-// Bits 4:0 are Utopia address for BC1
-// Bits 9:5 are Utopia address for BC0
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_UTPADDR_BC1 0x001F
-#define OPTN_UTPADDR_BC0 0x03E0
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMNumCellConfig
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 ///
-#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 ///
-
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// CNFG register address field ///
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////
-// these cmvs are used by bis handshake ///
-///////////////////////////////////////////
-
-// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
-#define CNFG_TPS_TC_DS0 0
-#define CNFG_TPS_TC_DS1 1
-#define CNFG_TPS_TC_US0 2
-#define CNFG_TPS_TC_US1 3
-
-#define CNFG_HDLC_Overhead_Requirements 4
-
-// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
-#define CNFG_PMS_TC_DS0 5
-#define CNFG_PMS_TC_DS1 6
-#define CNFG_PMS_TC_US0 7
-#define CNFG_PMS_TC_US1 8
-
-// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
-#define CNFG_PMD_PARAMETERS 9
-
-////////////////////////////////////////////////////////////
-// these cmvs are used by bis training and showtime code ///
-////////////////////////////////////////////////////////////
-
-////////////////
-// Tx Config ///
-////////////////
-#define CNFG_tx_Cnfg_Nbc 10
-#define CNFG_tx_Cnfg_Nlp 11
-#define CNFG_tx_Cnfg_Rp 12
-#define CNFG_tx_Cnfg_Mp 13
-#define CNFG_tx_Cnfg_Lp 14
-#define CNFG_tx_Cnfg_Tp 15
-#define CNFG_tx_Cnfg_Dp 16
-#define CNFG_tx_Cnfg_Bpn 17
-#define CNFG_tx_Cnfg_FramingMode 18
-#define CNFG_tx_Cnfg_MSGLp 19
-#define CNFG_tx_Cnfg_MSGc 20
-
-
-////////////////
-// Rx Config ///
-////////////////
-#define CNFG_rx_Cnfg_Nbc 21
-#define CNFG_rx_Cnfg_Nlp 22
-#define CNFG_rx_Cnfg_Rp 23
-#define CNFG_rx_Cnfg_Mp 24
-#define CNFG_rx_Cnfg_Lp 25
-#define CNFG_rx_Cnfg_Tp 26
-#define CNFG_rx_Cnfg_Dp 27
-#define CNFG_rx_Cnfg_Bpn 28
-#define CNFG_rx_Cnfg_FramingMode 29
-#define CNFG_rx_Cnfg_MSGLp 30
-#define CNFG_rx_Cnfg_MSGc 31
-
-#define CNFG_tx_Cnfg_BCnToLPp 32
-#define CNFG_rx_Cnfg_BCnToLPp 33
-
-
-
-#endif
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h
deleted file mode 100644
index 13273813a8..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h
+++ /dev/null
@@ -1,177 +0,0 @@
-#ifndef AMAZON_SW_H
-#define AMAZON_SW_H
-#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE
-#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1
-#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2
-#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3
-#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4
-#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5
-#define SET_ETH_REG SIOCDEVPRIVATE+6
-#define VLAN_TOOLS SIOCDEVPRIVATE+7
-#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8
-
-
-/*===mac table commands==*/
-#define RESET_MAC_TABLE 0
-#define READ_MAC_ENTRY 1
-#define WRITE_MAC_ENTRY 2
-#define ADD_MAC_ENTRY 3
-
-/*====vlan commands===*/
-
-#define CHANGE_VLAN_CTRL 0
-#define READ_VLAN_ENTRY 1
-#define UPDATE_VLAN_ENTRY 2
-#define CLEAR_VLAN_ENTRY 3
-#define RESET_VLAN_TABLE 4
-#define ADD_VLAN_ENTRY 5
-
-/*
-** MDIO constants.
-*/
-
-#define MDIO_BASE_STATUS_REG 0x1
-#define MDIO_BASE_CONTROL_REG 0x0
-#define MDIO_PHY_ID_HIGH_REG 0x2
-#define MDIO_PHY_ID_LOW_REG 0x3
-#define MDIO_BC_NEGOTIATE 0x0200
-#define MDIO_BC_FULL_DUPLEX_MASK 0x0100
-#define MDIO_BC_AUTO_NEG_MASK 0x1000
-#define MDIO_BC_SPEED_SELECT_MASK 0x2000
-#define MDIO_STATUS_100_FD 0x4000
-#define MDIO_STATUS_100_HD 0x2000
-#define MDIO_STATUS_10_FD 0x1000
-#define MDIO_STATUS_10_HD 0x0800
-#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800
-#define MDIO_ADVERTISMENT_REG 0x4
-#define MDIO_ADVERT_100_FD 0x100
-#define MDIO_ADVERT_100_HD 0x080
-#define MDIO_ADVERT_10_FD 0x040
-#define MDIO_ADVERT_10_HD 0x020
-#define MDIO_LINK_UP_MASK 0x4
-#define MDIO_START 0x1
-#define MDIO_READ 0x2
-#define MDIO_WRITE 0x1
-#define MDIO_PREAMBLE 0xfffffffful
-
-#define PHY_RESET 0x8000
-#define AUTO_NEGOTIATION_ENABLE 0X1000
-#define AUTO_NEGOTIATION_COMPLETE 0x20
-#define RESTART_AUTO_NEGOTIATION 0X200
-
-
-#define PHY0_ADDR 0
-#define PHY1_ADDR 1
-#define P1M 0
-
-#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num))
-
-#define OK 0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
- u64 mac_address:48;
- u64 p0:1;
- u64 p1:1;
- u64 p2:1;
- u64 cr:1;
- u64 ma_st:3;
- u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
- u32 vlan_id:12;
- u32 mp0:1;
- u32 mp1:1;
- u32 mp2:1;
- u32 v:1;
- u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-typedef struct mac_table_req{
- int cmd;
- int index;
- u32 data;
- u64 entry_value;
-}_mac_table_req;
-
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
- u64 mac_address:48;
- u64 p0:1;
- u64 p1:1;
- u64 p2:1;
- u64 cr:1;
- u64 ma_st:3;
- u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
- u32 vlan_id:12;
- u32 mp0:1;
- u32 mp1:1;
- u32 mp2:1;
- u32 v:1;
- u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-
-typedef struct mac_table_req{
- int cmd;
- int index;
- u32 data;
- u64 entry_value;
-}_mac_table_req;
-
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-
-
-typedef struct vlan_req{
- int cmd;
- int index;
- u32 data;
- u32 entry_value;
-}_vlan_req;
-
-typedef struct data_req{
- int index;
- u32 value;
-}_data_req;
-
-enum duplex
-{
- half,
- full,
- autoneg
-};
-
-struct switch_priv {
- struct net_device_stats stats;
- int rx_packetlen;
- u8 *rx_packetdata;
- int rx_status;
- int tx_packetlen;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- int fc_bit;
-#endif //CONFIG_NET_HW_FLOWCONTROL
- u8 *tx_packetdata;
- int tx_status;
- struct dma_device_info *dma_device;
- struct sk_buff *skb;
- spinlock_t lock;
- int mdio_phy_addr;
- int current_speed;
- int current_speed_selection;
- int rx_queue_len;
- int full_duplex;
- enum duplex current_duplex;
- int num;
-};
-
-#endif //AMAZON_SW_H
-
-
-
-
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h
deleted file mode 100644
index a64e6f9f80..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h
+++ /dev/null
@@ -1,258 +0,0 @@
-#ifndef AMAZON_TPE_H
-#define AMAZON_TPE_H
-#include <linux/atm.h>
-#include <linux/atmdev.h>
-#include <linux/netdevice.h>
-#include <linux/ioctl.h>
-
-#ifdef CONFIG_IFX_ATM_MIB
-/* For ATM-MIB lists */
-#include <linux/list.h>
-#endif
-#include <asm/amazon/atm_mib.h>
-
-/* CBM Queue arranagement
- * Q0: free cells pool
- * Q1~ Q15: upstream queues
- * Q16: QAM downstream
- * Q17~Q31: downstream queues
- */
-#define AMAZON_ATM_MAX_QUEUE_NUM 32
-#define AMAZON_ATM_PORT_NUM 2
-#define AMAZON_ATM_FREE_CELLS 4000
-#define AMAZON_ATM_MAX_VCC_NUM (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1)
-#define AMAZON_AAL0_SDU (ATM_AAL0_SDU+4) //one more word for status
-#define CBM_RX_OFFSET 16 //offset from the same q for tx
-#define AMAZON_ATM_OAM_Q_ID 16
-#define AMAZON_ATM_RM_Q_ID 16
-#define AMAZON_ATM_OTHER_Q_ID 16
-#define CBM_DEFAULT_Q_OFFSET 1
-#define HTUTIMEOUT 0xffff//timeoutofhtutocbm
-#define QSB_WFQ_NONUBR_MAX 0x3f00
-#define QSB_WFQ_UBR_BYPASS 0x3fff
-#define QSB_TP_TS_MAX 65472
-#define QSB_TAUS_MAX 64512
-#define QSB_GCR_MIN 18
-#define HTU_RAM_ACCESS_MAX 1024//maxium time for HTU RAM access
-
-#define SWIE_LOCK 1
-#define PROC_ATM 1
-#define PROC_MIB 2
-#define PROC_VCC 3
-#define PROC_AAL5 4
-#define PROC_CBM 5
-#define PROC_HTU 6
-#define PROC_QSB 7
-#define PROC_SWIE 8
-
-/***************** internal data structure ********************/
-typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ;
-/* Device private data */
-typedef struct{
- u8 padding_byte;
- u32 tx_max_sdu;
- u32 rx_max_sdu;
- u32 cnt_cpy; //no. of packets that need a copy due to alignment
-}amazon_aal5_dev_t;
-
-typedef struct{
- u32 max_q_off; //maxium queues used in real scenario
- u32 nrt_thr;
- u32 clp0_thr;
- u32 clp1_thr;
- u32 free_cell_cnt;
-#ifdef CONFIG_USE_VENUS
- u8 * qd_addr_free; //to work around a bug, bit15 of QDOFF address should be 1
-#endif
- u8 * qd_addr;
- u8 * mem_addr;
- u8 allocated;
-}amazon_cbm_dev_t;
-
-typedef struct{
-
-}amazon_htu_dev_t;
-
-typedef struct{
- u32 tau; //cell delay variation due to concurrency(?)
- u32 tstepc; //time step, all legal values are 1,2,4
- u32 sbl; //scheduler burse length (for PHY)
-}amazon_qsb_dev_t;
-
-typedef struct{
- u32 qid; //QID of the current extraction queue
- struct semaphore in_sem; // Software-Insertion semaphore
- volatile long lock; //lock that avoids race contions between SWIN and SWEX
- wait_queue_head_t sleep; //wait queue for SWIE and SWEX
- u32 sw; //status word
-}amazon_swie_dev_t;
-
-//AAL5 MIB Counter
-typedef struct{
- u32 tx,rx; //number AAL5 CPCS PDU from/to higher-layer
- u32 tx_err,rx_err; //ifInErrors and ifOutErros
- u32 tx_drop,rx_drop; //discarded received packets due to mm shortage
- u32 htu_unp; //number of unknown received cells
- u32 rx_cnt_h; //number of octets received, high 32 bits
- u32 rx_cnt_l; //number of octets received, low 32 bits
- u32 tx_cnt_h; //number of octets transmitted, high 32 bits
- u32 tx_cnt_l; //number of octets transmitted, low 32 bits
- u32 tx_ppd; //number of cells for AAL5 upstream PPD discards
- u64 rx_cells; //number of cells for downstream
- u64 tx_cells; //number of cells for upstream
- u32 rx_err_cells; //number of cells dropped due to uncorrectable HEC errors
-}amazon_mib_counter_t;
-
-
-
-typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t;
-//queue statics no. of packet received / sent
-//queue statics no. of bytes received / sent
-//queue statics no. of packets with error
-//queue statics no. of packets dropped by hw
-//queue statics no. of packets dropped by sw
-
-typedef struct{
- push_back_t push; //call back function
- struct atm_vcc * vcc; //opened vcc
- struct timeval access_time; //time when last F4/F5 user cells arrive
- int free; //whether this queue is occupied, 0: occupied, 1: free
- u32 aal5VccCrcErrors; //MIB counter
- u32 aal5VccOverSizedSDUs; //MIB counter
-
-#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB)
- u32 qs[QS_MAX];
-#endif
-}amazon_atm_queue_t;
-
-
-typedef struct{
- int enable; //enable / disable
- u32 max_conn; //maximum number of connections per port
- u32 tx_max_cr; //Remaining cellrate for this device for tx direction
- u32 tx_rem_cr; //Remaining cellrate for this device for tx direction
- u32 tx_cur_cr; //Current cellrate for this device for tx direction
-}amazon_atm_port_t;
-
-typedef struct{
- amazon_aal5_dev_t aal5;
- amazon_cbm_dev_t cbm;
- amazon_htu_dev_t htu;
- amazon_qsb_dev_t qsb;
- amazon_swie_dev_t swie;
- amazon_mib_counter_t mib_counter;
- amazon_atm_queue_t queues[AMAZON_ATM_MAX_QUEUE_NUM];
- amazon_atm_port_t ports[AMAZON_ATM_PORT_NUM];
- atomic_t dma_tx_free_0;//TX_CH0 has availabe descriptors
-} amazon_atm_dev_t;
-
-struct oam_last_activity{
- u8 vpi; //vpi for this connection
- u16 vci; //vci for t his connection
- struct timeval stamp; //time when last F4/F5 user cells arrive
- struct oam_last_activity * next;//for link list purpose
-};
-
-typedef union{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- struct{
- u32 tprs :16;
- u32 twfq :14;
- u32 vbr :1;
- u32 reserved :1;
- }bit;
- u32 w0;
-#else
- struct{
- u32 reserved :1;
- u32 vbr :1;
- u32 twfq :14;
- u32 tprs :16;
- }bit;
- u32 w0;
-#endif
-
-}qsb_qptl_t;
-
-typedef union{
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- struct{
- u32 ts :16;
- u32 taus :16;
- }bit;
- u32 w0;
-#else
- struct{
- u32 taus :16;
- u32 ts :16;
- }bit;
- u32 w0;
-#endif
-}qsb_qvpt_t;
-
-
-
-struct amazon_atm_cell_header {
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- struct{
- u32 clp :1; // Cell Loss Priority
- u32 pti :3; // Payload Type Identifier
- u32 vci :16; // Virtual Channel Identifier
- u32 vpi :8; // Vitual Path Identifier
- u32 gfc :4; // Generic Flow Control
- }bit;
-#else
- struct{
- u32 gfc :4; // Generic Flow Control
- u32 vpi :8; // Vitual Path Identifier
- u32 vci :16; // Virtual Channel Identifier
- u32 pti :3; // Payload Type Identifier
- u32 clp :1; // Cell Loss Priority
- }bit;
-#endif
-};
-
-
-/************************ Function Declarations **************************/
-amazon_atm_dev_t * amazon_atm_create(void);
-int amazon_atm_open(struct atm_vcc *vcc,push_back_t);
-int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb);
-int amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags);
-void amazon_atm_close(struct atm_vcc *vcc);
-void amazon_atm_cleanup(void);
-const struct oam_last_activity* get_oam_time_stamp(void);
-
-//mib-related
-int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf);
-int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to);
-int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to);
-int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to);
-
-#define AMAZON_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0)
-#define AMAZON_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
-/******************************* ioctl stuff****************************************/
-#define NUM(dev) (MINOR(dev) & 0xf)
-/*
- * Ioctl definitions
- */
-/* Use 'o' as magic number */
-#define AMAZON_ATM_IOC_MAGIC 'o'
-/* MIB_CELL: get atm cell level mib counter
- * MIB_AAL5: get aal5 mib counter
- * MIB_VCC: get vcc mib counter
- */
-typedef struct{
- int vpi;
- int vci;
- atm_aal5_vcc_t mib_vcc;
-}atm_aal5_vcc_x_t;
-#define AMAZON_ATM_MIB_CELL _IOWR(AMAZON_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t)
-#define AMAZON_ATM_MIB_AAL5 _IOWR(AMAZON_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t)
-#define AMAZON_ATM_MIB_VCC _IOWR(AMAZON_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t)
-#define AMAZON_ATM_IOC_MAXNR 3
-
-//sockopt
-#define SO_AMAZON_ATM_MIB_VCC __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t)
-
-#endif // AMAZON_TPE_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h
deleted file mode 100644
index 775dabccfb..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef AMAZON_WDT_H
-#define AMAZON_WDT_H
-#ifdef __KERNEL__
-typedef struct wdt_dev{
- char name[16];
- int major;
- int minor;
-
- int full;
- char buff[10];
-}wdt_dev;
-#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr)))
-#endif //__KERNEL__
-
-//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value)
-//AMAZON_WDT_IOC_STOP: stop the WDT
-//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START)
-#define AMAZON_WDT_IOC_MAGIC 0xc0
-#define AMAZON_WDT_IOC_START _IOW( AMAZON_WDT_IOC_MAGIC,0, int)
-#define AMAZON_WDT_IOC_STOP _IO( AMAZON_WDT_IOC_MAGIC,1)
-#define AMAZON_WDT_IOC_PING _IO( AMAZON_WDT_IOC_MAGIC,2)
-
-#endif //AMAZON_WDT_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h
deleted file mode 100644
index 8adda20051..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h
+++ /dev/null
@@ -1,540 +0,0 @@
-#ifndef ATM_DEFINES_H
-#define ATM_DEFINES_H
-
-//Registers Base Address
-#define IO_BASE_ADDR 0xA0000000
-#define AAL5_BASE_ADDRESS 0x10104400+IO_BASE_ADDR
-#define CBM_BASE_ADDRESS 0x10104000+IO_BASE_ADDR
-#define HTU_BASE_ADDRESS 0x10105100+IO_BASE_ADDR
-#define QSB_BASE_ADDRESS 0x10105000+IO_BASE_ADDR
-#define SWIE_BASE_ADDRESS 0x10105200+IO_BASE_ADDR
-
-//AAL5 Registers
-#define AAL5_SISR0_ADDR AAL5_BASE_ADDRESS+0x20
-#define AAL5_SIMR0_ADDR AAL5_BASE_ADDRESS+0x24
-#define AAL5_SISR1_ADDR AAL5_BASE_ADDRESS+0x28
-#define AAL5_SIMR1_ADDR AAL5_BASE_ADDRESS+0x2C
-#define AAL5_SMFL_ADDR AAL5_BASE_ADDRESS+0x30
-#define AAL5_SATMHD_ADDR AAL5_BASE_ADDRESS+0x34
-#define AAL5_SCON_ADDR AAL5_BASE_ADDRESS+0x38
-#define AAL5_SCMD_ADDR AAL5_BASE_ADDRESS+0x3C
-#define AAL5_RISR0_ADDR AAL5_BASE_ADDRESS+0x40
-#define AAL5_RIMR0_ADDR AAL5_BASE_ADDRESS+0x44
-#define AAL5_RISR1_ADDR AAL5_BASE_ADDRESS+0x48
-#define AAL5_RIMR1_ADDR AAL5_BASE_ADDRESS+0x4C
-#define AAL5_RMFL_ADDR AAL5_BASE_ADDRESS+0x50
-#define AAL5_RINTINF0_ADDR AAL5_BASE_ADDRESS+0x54
-#define AAL5_RINTINF1_ADDR AAL5_BASE_ADDRESS+0x58
-#define AAL5_RES5C_ADDR AAL5_BASE_ADDRESS+0x5C
-#define AAL5_RIOL_ADDR AAL5_BASE_ADDRESS+0x60
-#define AAL5_RIOM_ADDR AAL5_BASE_ADDRESS+0x64
-#define AAL5_SOOL_ADDR AAL5_BASE_ADDRESS+0x68
-#define AAL5_SOOM_ADDR AAL5_BASE_ADDRESS+0x6C
-#define AAL5_RES70_ADDR AAL5_BASE_ADDRESS+0x70
-#define AAL5_RES74_ADDR AAL5_BASE_ADDRESS+0x74
-#define AAL5_RES78_ADDR AAL5_BASE_ADDRESS+0x78
-#define AAL5_RES7C_ADDR AAL5_BASE_ADDRESS+0x7C
-#define AAL5_RES80_ADDR AAL5_BASE_ADDRESS+0x80
-#define AAL5_RES84_ADDR AAL5_BASE_ADDRESS+0x84
-#define AAL5_RES88_ADDR AAL5_BASE_ADDRESS+0x88
-#define AAL5_RES8C_ADDR AAL5_BASE_ADDRESS+0x8C
-#define AAL5_RES90_ADDR AAL5_BASE_ADDRESS+0x90
-#define AAL5_RES94_ADDR AAL5_BASE_ADDRESS+0x94
-#define AAL5_RES98_ADDR AAL5_BASE_ADDRESS+0x98
-#define AAL5_RES9C_ADDR AAL5_BASE_ADDRESS+0x9C
-#define AAL5_RESA0_ADDR AAL5_BASE_ADDRESS+0xA0
-#define AAL5_RESA4_ADDR AAL5_BASE_ADDRESS+0xA4
-#define AAL5_RESA8_ADDR AAL5_BASE_ADDRESS+0xA8
-#define AAL5_RESAC_ADDR AAL5_BASE_ADDRESS+0xAC
-#define AAL5_RESB0_ADDR AAL5_BASE_ADDRESS+0xB0
-#define AAL5_RESB4_ADDR AAL5_BASE_ADDRESS+0xB4
-#define AAL5_RESB8_ADDR AAL5_BASE_ADDRESS+0xB8
-#define AAL5_RESBC_ADDR AAL5_BASE_ADDRESS+0xBC
-#define AAL5_RESC0_ADDR AAL5_BASE_ADDRESS+0xC0
-#define AAL5_RESC4_ADDR AAL5_BASE_ADDRESS+0xC4
-#define AAL5_RESC8_ADDR AAL5_BASE_ADDRESS+0xC8
-#define AAL5_RESCC_ADDR AAL5_BASE_ADDRESS+0xCC
-#define AAL5_RESD0_ADDR AAL5_BASE_ADDRESS+0xD0
-#define AAL5_RESD4_ADDR AAL5_BASE_ADDRESS+0xD4
-#define AAL5_RESD8_ADDR AAL5_BASE_ADDRESS+0xD8
-#define AAL5_RESDC_ADDR AAL5_BASE_ADDRESS+0xDC
-#define AAL5_RESE0_ADDR AAL5_BASE_ADDRESS+0xE0
-#define AAL5_RESE4_ADDR AAL5_BASE_ADDRESS+0xE4
-#define AAL5_RESE8_ADDR AAL5_BASE_ADDRESS+0xE8
-#define AAL5_RESEC_ADDR AAL5_BASE_ADDRESS+0xEC
-#define AAL5_SSRC0_ADDR AAL5_BASE_ADDRESS+0xF0
-#define AAL5_SSRC1_ADDR AAL5_BASE_ADDRESS+0xF4
-#define AAL5_RSRC0_ADDR AAL5_BASE_ADDRESS+0xF8
-#define AAL5_RSRC1_ADDR AAL5_BASE_ADDRESS+0xFC
-
-#define AAL5S_ISR_QID_MASK 0xFF000000
-#define AAL5S_ISR_SAB 0x00000100
-#define AAL5S_ISR_SE 0x00000080
-#define AAL5S_ISR_MFLE 0x00000040
-#define AAL5S_ISR_SBE0 0x00000020
-#define AAL5S_ISR_SEG0 0x00000010
-#define AAL5S_ISR_TAB 0x00000004
-
-#define AAL5_SIMR_MASK 0x000001c7
-#define AAL5_SIMR_SAB 0x00000100
-#define AAL5_SIMR_SE 0x00000080
-#define AAL5_SIMR_MFLE 0x00000040
-#define AAL5_SIMR_TAB 0x00000004
-#define AAL5_SIMR_SBE0 0x00000002
-#define AAL5_SIMR_SEG0 0x00000001
-
-#define AAL5_SCMD_SEQCOUNT_MASK 0x0000ff00
-#define AAL5_SCMD_MODE_POLL 0x00000008
-#define AAL5_SCMD_MODE_COUNT 0x00000000
-#define AAL5_SCMD_AS 0x00000004
-#define AAL5_SCMD_SS 0x00000002
-#define AAL5_SCMD_AR 0x00000001
-
-#define AAL5R_ISR_CID_MASK 0xFF000000//ConnectionID
-#define AAL5R_ISR_DBC_MASK 0x00FF0000//DiscardedByteCounter
-#define AAL5R_ISR_END 0x00002000//End
-#define AAL5R_ISR_ICID 0x00001000//InvalidConnectionID
-#define AAL5R_ISR_CLP 0x00000800//CellLossPriority
-#define AAL5R_ISR_CGST 0x00000400//Congestion
-#define AAL5R_ISR_UUE 0x00000200//CPCSUUError
-#define AAL5R_ISR_CPIE 0x00000100//CPIError
-#define AAL5R_ISR_FE 0x00000080//FrameEnd
-#define AAL5R_ISR_MFLE 0x00000040//MaximumFrameLengthExceeded
-#define AAL5R_ISR_DBCE 0x00000020//DiscardedByteCounterExceeded
-#define AAL5R_ISR_CRC 0x00000010//CRCError
-#define AAL5R_ISR_ILEN 0x00000008//InvalidLength
-#define AAL5R_ISR_RAB 0x00000004//ReceiveAbort
-
-#define AAL5_RIMR1_MASK 0x00003ffc
-#define AAL5_RIMR1_END 0x00002000//End
-#define AAL5_RIMR1_ICID 0x00001000//InvalidConnectionID
-#define AAL5_RIMR1_CLP 0x00000800//CellLossPriority
-#define AAL5_RIMR1_CGST 0x00000400//Congestion
-#define AAL5_RIMR1_UUE 0x00000200//CPCSUUError
-#define AAL5_RIMR1_CPIE 0x00000100//CPIError
-#define AAL5_RIMR1_FE 0x00000080//FrameEnd
-#define AAL5_RIMR1_MFLE 0x00000040//MaximumFrameLengthExceeded
-#define AAL5_RIMR1_DBCE 0x00000020//DiscardedByteCounterExceeded
-#define AAL5_RIMR1_CRC 0x00000010//CRCError
-#define AAL5_RIMR1_ILEN 0x00000008//InvalidLength
-#define AAL5_RIMR1_RAB 0x00000004//ReceiveAbort
-
-//AAL5 Reassambly Errors
-#define AAL5_STW1_MASK 0x33//Error mask
-#define AAL5_STW0_MASK 0x5c//Error mask
-#define AAL5_STW0_BE 0x3//padding bytes mask
-#define AAL5_STW1_CBM 0x20//Transfer from CBM to A5R abnormally ended
-#define AAL5_STW1_CH 0x10//Invalid Channel number error
-#define AAL5_STW1_CLP 0x8//CLP value of cells in packet is 1
-#define AAL5_STW1_CG 0x4//Cell in packet expired congestion
-#define AAL5_STW1_UU 0x2//CPCS-UU value error
-#define AAL5_STW1_CPI 0x1//CPI value error
-#define AAL5_STW0_FE 0x80//Frame end
-#define AAL5_STW0_MFL 0x40//Maximum frame length error
-#define AAL5_STW0_CRC 0x10//CRC error
-#define AAL5_STW0_IL 0x8//Invalid length
-#define AAL5_STW0_RA 0x4//Received abort
-
-
-
-//CBM Registers
-#define CBM_NRTTHR_ADDR CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold
-#define CBM_CLP0THR_ADDR CBM_BASE_ADDRESS+0x14//CLP0Threshold
-#define CBM_CLP1THR_ADDR CBM_BASE_ADDRESS+0x18//CLP1Threshold
-#define CBM_QDOFF_ADDR CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset
-#define CBM_CFG_ADDR CBM_BASE_ADDRESS+0x20//Configuration
-#define CBM_HWEXPAR0_ADDR CBM_BASE_ADDRESS+0x24//HWExtractParameter0
-#define CBM_RES28_ADDR CBM_BASE_ADDRESS+0x28
-#define CBM_WMSTAT0_ADDR CBM_BASE_ADDRESS+0x2C
-#define CBM_HWEXCMD_ADDR CBM_BASE_ADDRESS+0x30//HWExtractCommand0
-#define CBM_RES34_ADDR CBM_BASE_ADDRESS+0x34
-#define CBM_HWEXSTAT0_ADDR CBM_BASE_ADDRESS+0x38//HWExtractStatus0
-#define CBM_RES3C_ADDR CBM_BASE_ADDRESS+0x3C
-#define CBM_RES40_ADDR CBM_BASE_ADDRESS+0x40
-#define CBM_CNT_ADDR CBM_BASE_ADDRESS+0x44//CellCount
-#define CBM_RES48_ADDR CBM_BASE_ADDRESS+0x48
-#define CBM_LFR_ADDR CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue
-#define CBM_FFR_ADDR CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue
-#define CBM_RES54_ADDR CBM_BASE_ADDRESS+0x54
-#define CBM_RES58_ADDR CBM_BASE_ADDRESS+0x58
-#define CBM_RES5C_ADDR CBM_BASE_ADDRESS+0x5C
-#define CBM_RES60_ADDR CBM_BASE_ADDRESS+0x60
-#define CBM_RES64_ADDR CBM_BASE_ADDRESS+0x64
-#define CBM_RES68_ADDR CBM_BASE_ADDRESS+0x68
-#define CBM_RES6C_ADDR CBM_BASE_ADDRESS+0x6C
-#define CBM_RES70_ADDR CBM_BASE_ADDRESS+0x70
-#define CBM_RES74_ADDR CBM_BASE_ADDRESS+0x74
-#define CBM_RES78_ADDR CBM_BASE_ADDRESS+0x78
-#define CBM_RES7C_ADDR CBM_BASE_ADDRESS+0x7C
-#define CBM_RES80_ADDR CBM_BASE_ADDRESS+0x80
-#define CBM_RES84_ADDR CBM_BASE_ADDRESS+0x84
-#define CBM_RES88_ADDR CBM_BASE_ADDRESS+0x88
-#define CBM_RES8C_ADDR CBM_BASE_ADDRESS+0x8C
-#define CBM_RES90_ADDR CBM_BASE_ADDRESS+0x90
-#define CBM_RES94_ADDR CBM_BASE_ADDRESS+0x94
-#define CBM_RES98_ADDR CBM_BASE_ADDRESS+0x98
-#define CBM_RES9C_ADDR CBM_BASE_ADDRESS+0x9C
-#define CBM_RESA0_ADDR CBM_BASE_ADDRESS+0xA0
-#define CBM_RESA4_ADDR CBM_BASE_ADDRESS+0xA4
-#define CBM_RESA8_ADDR CBM_BASE_ADDRESS+0xA8
-#define CBM_RESAC_ADDR CBM_BASE_ADDRESS+0xAC
-#define CBM_RESB0_ADDR CBM_BASE_ADDRESS+0xB0
-#define CBM_RESB4_ADDR CBM_BASE_ADDRESS+0xB4
-#define CBM_RESB8_ADDR CBM_BASE_ADDRESS+0xB8
-#define CBM_RESBC_ADDR CBM_BASE_ADDRESS+0xBC
-#define CBM_INTINF0_ADDR CBM_BASE_ADDRESS+0xC0//InterruptInfo0
-#define CBM_INTCMD_ADDR CBM_BASE_ADDRESS+0xC4//InterruptCommand0
-#define CBM_IMR0_ADDR CBM_BASE_ADDRESS+0xC8//InterruptMask
-#define CBM_SRC0_ADDR CBM_BASE_ADDRESS+0xCC//ServiceRequestControl
-#define CBM_RESD0_ADDR CBM_BASE_ADDRESS+0xD0
-#define CBM_RESD4_ADDR CBM_BASE_ADDRESS+0xD4
-#define CBM_RESD8_ADDR CBM_BASE_ADDRESS+0xD8
-#define CBM_RESDC_ADDR CBM_BASE_ADDRESS+0xDC
-#define CBM_RESE0_ADDR CBM_BASE_ADDRESS+0xE0
-#define CBM_AAL5IDIS_ADDR CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream
-#define CBM_AAL5ODIS_ADDR CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream
-#define CBM_RESEC_ADDR CBM_BASE_ADDRESS+0xEC
-#define CBM_RESF0_ADDR CBM_BASE_ADDRESS+0xF0
-#define CBM_RESF4_ADDR CBM_BASE_ADDRESS+0xF4
-#define CBM_RESF8_ADDR CBM_BASE_ADDRESS+0xF8
-#define CBM_RESFC_ADDR CBM_BASE_ADDRESS+0xFC
-
-//CBMCFG
-#define CBM_CFG_INTLCK0EN 0x00000008
-#define CBM_CFG_INT0HLT 0x00000004
-#define CBM_CFG_START 0x00000001
-
-#define CBM_HWEXPAR_PN_A5 0x00002000
-#define CBM_HWEXPAR_PN_CM 0x00000000
-#define CBM_HWEXPAR_SUBADD_PORTMASK 0x00000070
-#define CBM_HWEXPAR_SUBADD_ADU 0x00000000
-#define CBM_HWEXPAR_SUBADD_AAL2 0x00000080
-#define CBM_HWEXPAR_SUBADD_SWIE 0x00000100
-
-#define CBM_HWEXCMD_SFE2 0x00000100
-#define CBM_HWEXCMD_FE2 0x00000080
-#define CBM_HWEXCMD_SCE2 0x00000040
-#define CBM_HWEXCMD_SFE1 0x00000020
-#define CBM_HWEXCMD_FE1 0x00000010
-#define CBM_HWEXCMD_SCE1 0x00000008
-#define CBM_HWEXCMD_SFE0 0x00000004
-#define CBM_HWEXCMD_FE0 0x00000002
-#define CBM_HWEXCMD_SCE0 0x00000001
-
-#define CBM_INTINF0_QID_MASK 0xFF000000
-#define CBM_INTINF0_ORIGIN_MASK 0x00F00000
-#define CBM_INTINF0_EF 0x00004000
-#define CBM_INTINF0_ACA 0x00002000
-#define CBM_INTINF0_ERR 0x00001000
-#define CBM_INTINF0_DISC 0x00000800
-#define CBM_INTINF0_QSBV 0x00000400
-#define CBM_INTINF0_Q0E 0x00000200
-#define CBM_INTINF0_Q0I 0x00000100
-#define CBM_INTINF0_RDE 0x00000080
-#define CBM_INTINF0_OPF 0x00000040
-#define CBM_INTINF0_NFCA 0x00000020
-#define CBM_INTINF0_CLP1TR 0x00000010
-#define CBM_INTINF0_CLP0TR 0x00000008
-#define CBM_INTINF0_NRTTR 0x00000004
-#define CBM_INTINF0_QFD 0x00000002
-#define CBM_INTINF0_QTR 0x00000001
-#define CBM_INTINF0_QID_SHIFT 24
-//CBM QD Word 3
-#define CBM_QD_W3_QOS_0 0x00000000
-#define CBM_QD_W3_QOS_1 0x40000000
-#define CBM_QD_W3_QOS_2 0x80000000
-#define CBM_QD_W3_QOS_3 0xc0000000
-
-#define CBM_QD_W3_DIR_UP 0x20000000
-#define CBM_QD_W3_DIR_DOWN 0x00000000
-
-#define CBM_QD_W3_CLPt 0x10000000
-#define CBM_QD_W3_RT 0x08000000
-#define CBM_QD_W3_AAL5 0x04000000
-
-#define CBM_QD_W3_INT_NOINT 0x00000000
-#define CBM_QD_W3_INT_ACA 0x01000000
-#define CBM_QD_W3_INT_EOF 0x02000000
-#define CBM_QD_W3_INT_BOTH 0x03000000
-
-#define CBM_QD_W3_THRESHOLD_MASK 0x00ff0000
-#define CBM_QD_W3_WM_EN 0x00000010
-#define CBM_QD_W3_HCR 0x00000008
-#define CBM_QD_W3_SBID_MASK 0x00000001
-
-#define CBM_QD_W3_THRESHOLD_SHIFT 16
-
-//WATER MARK STATUS
-#define CBM_WM_NRT_MASK 0x00040000
-#define CBM_WM_CLP0_MASK 0x00020000
-#define CBM_WM_CLP1_MASK 0x00010000
-
-//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR
-#define CBM_NRT_WM_NONE 0x00000000//no water mark
-#define CBM_WM_3_1 0x00010000//3/4 to set, 1/4 to release
-#define CBM_WM_3_2 0x00020000//3/4 to set, 2/4 to release
-#define CBM_WM_2_1 0x00030000//2/4 to set, 1/4 to release
-#define CBM_THR_MASK 0x0000FFFF
-
-#define CBM_IMR_MASK 0x0000fbff
-#define CBM_IMR_reserved 0xFFFF0400
-#define CBM_IMR_RFULL 0x00008000//EndofFrame
-#define CBM_IMR_EF 0x00004000//EndofFrame
-#define CBM_IMR_ACA 0x00002000//AnyCellArrived
-#define CBM_IMR_ERR 0x00001000//FPI Error
-#define CBM_IMR_DISC 0x00000800//Discard
-#define CBM_IMR_reserved1 0x00000400//reserved
-#define CBM_IMR_Q0E 0x00000200//Queue0Extract
-#define CBM_IMR_Q0I 0x00000100//Queue0Insert
-#define CBM_IMR_RDE 0x00000080//ReadEmptyQueue
-#define CBM_IMR_OPF 0x00000040//OncePerFrame
-#define CBM_IMR_NFCA 0x00000020//NoFreeCellAvailable
-#define CBM_IMR_CLP1TR 0x00000010//CLP1ThresholdReached
-#define CBM_IMR_CLP0TR 0x00000008//CLP0ThresholdReached
-#define CBM_IMR_NRTTR 0x00000004//NonRealTimeThresholdReached
-#define CBM_IMR_QFD 0x00000002//QueueFrameDiscard
-#define CBM_IMR_QTR 0x00000001//QueueThresholdReached
-
-#define CBM_EXSTAT_FB 0x00000010
-#define CBM_EXSTAT_SCB 0x00000008
-#define CBM_EXSTAT_Q0 0x00000004
-#define CBM_EXSTAT_RDE 0x00000002
-#define CBM_EXSTAT_QV 0x00000001
-
-//HTU Registers
-#define HTU_RX0_ADDR HTU_BASE_ADDRESS+0x10
-#define HTU_RX1_ADDR HTU_BASE_ADDRESS+0x14
-#define HTU_RES18_ADDR HTU_BASE_ADDRESS+0x18
-#define HTU_RES1C_ADDR HTU_BASE_ADDRESS+0x1C
-#define HTU_RES20_ADDR HTU_BASE_ADDRESS+0x20
-#define HTU_RES24_ADDR HTU_BASE_ADDRESS+0x24
-#define HTU_RES28_ADDR HTU_BASE_ADDRESS+0x28
-#define HTU_RES2C_ADDR HTU_BASE_ADDRESS+0x2C
-#define HTU_PCF0PAT_ADDR HTU_BASE_ADDRESS+0x30
-#define HTU_PCF1PAT_ADDR HTU_BASE_ADDRESS+0x34
-#define HTU_RES38_ADDR HTU_BASE_ADDRESS+0x38
-#define HTU_RES3C_ADDR HTU_BASE_ADDRESS+0x3C
-#define HTU_RES40_ADDR HTU_BASE_ADDRESS+0x40
-#define HTU_RES44_ADDR HTU_BASE_ADDRESS+0x44
-#define HTU_RES48_ADDR HTU_BASE_ADDRESS+0x48
-#define HTU_RES4C_ADDR HTU_BASE_ADDRESS+0x4C
-#define HTU_PCF0MASK_ADDR HTU_BASE_ADDRESS+0x50
-#define HTU_PCF1MASK_ADDR HTU_BASE_ADDRESS+0x54
-#define HTU_RES58_ADDR HTU_BASE_ADDRESS+0x58
-#define HTU_RES5C_ADDR HTU_BASE_ADDRESS+0x5C
-#define HTU_RES60_ADDR HTU_BASE_ADDRESS+0x60
-#define HTU_RES64_ADDR HTU_BASE_ADDRESS+0x64
-#define HTU_RES68_ADDR HTU_BASE_ADDRESS+0x68
-#define HTU_RES6C_ADDR HTU_BASE_ADDRESS+0x6C
-#define HTU_TIMEOUT_ADDR HTU_BASE_ADDRESS+0x70
-#define HTU_DESTOAM_ADDR HTU_BASE_ADDRESS+0x74
-#define HTU_DESTRM_ADDR HTU_BASE_ADDRESS+0x78
-#define HTU_DESTOTHER_ADDR HTU_BASE_ADDRESS+0x7C
-#define HTU_CFG_ADDR HTU_BASE_ADDRESS+0x80
-#define HTU_RES84_ADDR HTU_BASE_ADDRESS+0x84
-#define HTU_RES88_ADDR HTU_BASE_ADDRESS+0x88
-#define HTU_RES8C_ADDR HTU_BASE_ADDRESS+0x8C
-#define HTU_INFNOENTRY_ADDR HTU_BASE_ADDRESS+0x90
-#define HTU_INFTIMEOUT_ADDR HTU_BASE_ADDRESS+0x94
-#define HTU_RES98_STAT HTU_BASE_ADDRESS+0x98
-#define HTU_RES9C_ADDR HTU_BASE_ADDRESS+0x9C
-#define HTU_MIBCIUP HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register
-#define HTU_CNTTIMEOUT_ADDR HTU_BASE_ADDRESS+0xA4
-#define HTU_RESA8_ADDR HTU_BASE_ADDRESS+0xA8
-#define HTU_RESAC_ADDR HTU_BASE_ADDRESS+0xAC
-#define HTU_RAMADDR_ADDR HTU_BASE_ADDRESS+0xB0
-#define HTU_RAMCMD_ADDR HTU_BASE_ADDRESS+0xB4
-#define HTU_RAMSTAT_ADDR HTU_BASE_ADDRESS+0xB8
-#define HTU_RESBC_ADDR HTU_BASE_ADDRESS+0xBC
-#define HTU_RAMDAT1_ADDR HTU_BASE_ADDRESS+0xC0
-#define HTU_RAMDAT2_ADDR HTU_BASE_ADDRESS+0xC4
-#define HTU_RESCC_ADDR HTU_BASE_ADDRESS+0xCC
-#define HTU_RESD0_ADDR HTU_BASE_ADDRESS+0xD0
-#define HTU_RESD4_ADDR HTU_BASE_ADDRESS+0xD4
-#define HTU_RESD8_ADDR HTU_BASE_ADDRESS+0xD8
-#define HTU_RESDC_ADDR HTU_BASE_ADDRESS+0xDC
-#define HTU_RESE0_ADDR HTU_BASE_ADDRESS+0xE0
-#define HTU_RESE4_ADDR HTU_BASE_ADDRESS+0xE4
-#define HTU_IMR0_ADDR HTU_BASE_ADDRESS+0xE8
-#define HTU_RESEC_ADDR HTU_BASE_ADDRESS+0xEC
-#define HTU_ISR0_ADDR HTU_BASE_ADDRESS+0xF0
-#define HTU_RESF4_ADDR HTU_BASE_ADDRESS+0xF4
-#define HTU_SRC0_ADDR HTU_BASE_ADDRESS+0xF8
-#define HTU_RESFC_ADDR HTU_BASE_ADDRESS+0xFC
-
-//HTU_CFG
-#define HTU_CFG_START 0x00000001
-
-#define HTU_RAMCMD_RMW 0x00000004
-#define HTU_RAMCMD_RD 0x00000002
-#define HTU_RAMCMD_WR 0x00000001
-
-#define HTU_RAMDAT1_VCON 0x00000080//validconnection
-#define HTU_RAMDAT1_VCT 0x00000040//vcivalueistransparent
-#define HTU_RAMDAT1_QIDS 0x00000020//qid selects a cell in cbm
-#define HTU_RAMDAT1_VCI3 0x00000010//vci3->oamqueue
-#define HTU_RAMDAT1_VCI4 0x00000008//vci4->oamqueue
-#define HTU_RAMDAT1_VCI6 0x00000004//vci6->rmqueue
-#define HTU_RAMDAT1_PTI4 0x00000002//pti4->oamqueue
-#define HTU_RAMDAT1_PTI5 0x00000001//pti5->oamqueue
-
-#define HTU_RAMDAT2_PTI6 0x00000800
-#define HTU_RAMDAT2_PTI7 0x00000400
-#define HTU_RAMDAT2_F4U 0x00000200
-#define HTU_RAMDAT2_F5U 0x00000100
-#define HTU_RAMDAT2_QID_MASK 0x000000ff
-
-#define HTU_ISR_NE 0x00000001
-#define HTU_ISR_TORD 0x00000002
-#define HTU_ISR_IT 0x00000008
-#define HTU_ISR_OTOC 0x00000010
-#define HTU_ISR_ONEC 0x00000020
-#define HTU_ISR_PNE 0x00000040
-#define HTU_ISR_PT 0x00000080
-#define HTU_ISR_MASK 0x000000ff
-
-
-//QSB Registers
-#define QSB_BIP0_ADDR QSB_BASE_ADDRESS+0x00
-#define QSB_BIP1_ADDR QSB_BASE_ADDRESS+0x04
-#define QSB_BIP2_ADDR QSB_BASE_ADDRESS+0x08
-#define QSB_BIP3_ADDR QSB_BASE_ADDRESS+0x0C
-#define QSB_RSVP_ADDR QSB_BASE_ADDRESS+0x10
-#define QSB_TNOW_ADDR QSB_BASE_ADDRESS+0x14
-#define QSB_TNOWCYC_ADDR QSB_BASE_ADDRESS+0x18
-#define QSB_TAU_ADDR QSB_BASE_ADDRESS+0x1C
-#define QSB_L1BRS_ADDR QSB_BASE_ADDRESS+0x20
-#define QSB_SBL_ADDR QSB_BASE_ADDRESS+0x24
-#define QSB_CONFIG_ADDR QSB_BASE_ADDRESS+0x28
-#define QSB_RTM_ADDR QSB_BASE_ADDRESS+0x2C
-#define QSB_RTD_ADDR QSB_BASE_ADDRESS+0x30
-#define QSB_RAMAC_ADDR QSB_BASE_ADDRESS+0x34
-#define QSB_ISR_ADDR QSB_BASE_ADDRESS+0x38
-#define QSB_IMR_ADDR QSB_BASE_ADDRESS+0x3C
-#define QSB_SRC_ADDR QSB_BASE_ADDRESS+0x40
-
-#define QSB_TABLESEL_QVPT 8
-#define QSB_TABLESEL_QPT 1
-#define QSB_TABLESEL_SCT 2
-#define QSB_TABLESEL_SPT 3
-#define QSB_TABLESEL_CALENDARWFQ 4/*notusedbyFW*/
-#define QSB_TABLESEL_L2WFQ 5/*notusedbyFW*/
-#define QSB_TABLESEL_CALENDARRS 6/*notusedbyFW*/
-#define QSB_TABLESEL_L2BITMAPRS 7/*notusedbyFW*/
-#define QSB_TABLESEL_SHIFT 24
-#define QSB_TWFQ_MASK 0x3FFF0000
-#define QSB_TPRS_MASK 0x0000FFFF
-#define QSB_SBID_MASK 0xF
-#define QSB_TWFQ_SHIFT 16
-#define QSB_SCDRATE_MASK 0x00007FFF
-#define QSB_SBVALID_MASK 0x80000000
-
-#define QSB_ISR_WFQLE 0x00000001
-#define QSB_ISR_WFQBE 0x00000002
-#define QSB_ISR_RSLE 0x00000004
-#define QSB_ISR_RSBE 0x00000008
-#define QSB_ISR_MUXOV 0x00000010
-#define QSB_ISR_CDVOV 0x00000020
-#define QSB_ISR_PARAMI 0x00000040
-#define QSB_ISR_SLOSS 0x00000080
-#define QSB_ISR_IIPS 0x00000100
-
-#define QSB_IMR_WFQLE 0x00000001
-#define QSB_IMR_WFQBE 0x00000002
-#define QSB_IMR_RSLE 0x00000004
-#define QSB_IMR_RSBE 0x00000008
-#define QSB_IMR_MUXOV 0x00000010
-#define QSB_IMR_CDVOV 0x00000020
-#define QSB_IMR_PARAMI 0x00000040
-#define QSB_IMR_SLOSS 0x00000080
-#define QSB_IMR_IIPS 0x00000100
-
-#define QSB_READ 0x0
-#define QSB_WRITE 0x80000000
-#define QSB_READ_ALL 0xFFFFFFFF
-
-#if 1 //some bug with QSB access mask
-#define QSB_QPT_SET_MASK 0x0
-#define QSB_QVPT_SET_MASK 0x0
-#define QSB_SET_SCT_MASK 0x0
-#define QSB_SET_SPT_MASK 0x0
-#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF
-#else //some bug with QSB access mask
-#define QSB_QPT_SET_MASK 0x80000000
-#define QSB_QVPT_SET_MASK 0x0
-#define QSB_SET_SCT_MASK 0xFFFFFFE0
-#define QSB_SET_SPT_MASK 0x7FF8C000
-#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF
-#endif //some bug with QSB access mask
-
-#define QSB_SPT_SBVALID 0x80000000
-
-#define QSB_RAMAC_REG_LOW 0x0
-#define QSB_RAMAC_REG_HIGH 0x00010000
-
-#define SRC_SRE_ENABLE 0x1000
-#define SRC_CLRR 0x4000 //request clear bit
-
-
-
-//SWIE Registers
-#define SWIE_IQID_ADDR SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor
-#define SWIE_ICMD_ADDR SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand
-#define SWIE_ISTAT_ADDR SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus
-#define SWIE_ESTAT_ADDR SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus
-#define SWIE_ISRC_ADDR SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl
-#define SWIE_ESRC_ADDR SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl
-#define SWIE_ICELL_ADDR SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4)
-#define SWIE_ECELL_ADDR SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4)
-
-#define SWIE_ISTAT_DONE 0x1
-#define SWIE_ESTAT_DONE 0x1
-#define SWIE_ICMD_START 0x00000001//Startcommandforinsertion
-#define SWIE_CBM_SCE0 CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract
-#define SWIE_CBM_PID_SUBADDR 0x00001000//CBMPortIDandSubAddressforUTOPIA
-
-//Extracted cell format
-//52bytes AAL0 PDU + "Input cell additional data"(14bits)
-#define SWIE_ADDITION_DATA_MASK 0x7fff
-#define SWIE_EPORT_MASK 0x7000//Source ID (000 AUB0, 001 AUB1)
-#define SWIE_EF4USER_MASK 0x800
-#define SWIE_EF5USER_MASK 0x400
-#define SWIE_EOAM_MASK 0x200
-#define SWIE_EAUU_MASK 0x100
-#define SWIE_EVCI3_MASK 0x80
-#define SWIE_EVCI4_MASK 0x40
-#define SWIE_EVCI6_MASK 0x20
-#define SWIE_EPTI4_MASK 0x10
-#define SWIE_EPTI5_MASK 0x8
-#define SWIE_EPTI6_MASK 0x4
-#define SWIE_EPTI7_MASK 0x2
-#define SWIE_ECRC10ERROR_MASK 0x1
-
-#define CBM_CELL_SIZE 0x40
-#define CBM_QD_SIZE 0x10
-#define AAL5R_TRAILER_LEN 12
-#define AAL5S_INBOUND_HEADER 8
-
-//constants
-//TODO: to be finalized by system guys
-//DMA QOS defined by ATM QoS Service type
-#define DMA_RX_CH0 0
-#define DMA_RX_CH1 1
-#define DMA_TX_CH0 0
-#define DMA_TX_CH1 1
-#define CBR_DMA_QOS CBM_QD_W3_QOS_0
-#define VBR_RT_DMA_QOS CBM_QD_W3_QOS_0
-#define VBR_NRT_DMA_QOS CBM_QD_W3_QOS_0
-#define UBR_PLUS_DMA_QOS CBM_QD_W3_QOS_0
-#define UBR_DMA_QOS CBM_QD_W3_QOS_0
-
-#define SRC_TOS_MIPS 0
-#define AAL5R_SRPN 0x00000006//a5rneedshigherprioritythanDR
-#define AAL5S_SRPN 0x00000005
-#define CBM_MIPS_SRPN 0x00000004
-#define QSB_SRPN 0x00000023
-#define HTU_SRPN1 0x00000022
-#define HTU_SRPN0 0x00000021
-
-#endif //ATM_DEFINES_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h
deleted file mode 100644
index f863342580..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef AMAZON_ATM_MIB_H
-#define AMAZON_ATM_MIB_H
-
-#ifdef CONFIG_IFX_ATM_MIB
-#include <asm/types.h>
-#ifdef __KERNEL__
-#include <linux/list.h>
-#endif
-#endif /* CONFIG_IFX_ATM_MIB */
-
-#ifndef __KERNEL__
-#include <atmMIB/local_list.h>
-typedef unsigned int __u32;
-#endif
-
-typedef struct{
- __u32 ifHCInOctets_h;
- __u32 ifHCInOctets_l;
- __u32 ifHCOutOctets_h;
- __u32 ifHCOutOctets_l;
- __u32 ifInErrors;
- __u32 ifInUnknownProtos;
- __u32 ifOutErrors;
-}atm_cell_ifEntry_t;
-
-typedef struct{
- __u32 ifHCInOctets_h;
- __u32 ifHCInOctets_l;
- __u32 ifHCOutOctets_h;
- __u32 ifHCOutOctets_l;
- __u32 ifInUcastPkts;
- __u32 ifOutUcastPkts;
- __u32 ifInErrors;
- __u32 ifInDiscards;
- __u32 ifOutErros;
- __u32 ifOutDiscards;
-}atm_aal5_ifEntry_t;
-
-typedef struct{
- __u32 aal5VccCrcErrors;
- __u32 aal5VccSarTimeOuts;//no timer support yet
- __u32 aal5VccOverSizedSDUs;
-}atm_aal5_vcc_t;
-
-#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB)
-/* ATM-MIB data structures */
-typedef struct atmIfConfEntry {
- int ifIndex;
- int atmInterfaceMaxVpcs;
- int atmInterfaceMaxVccs;
- int atmInterfaceConfVpcs;
- int atmInterfaceConfVccs;
- int atmInterfaceMaxActiveVpiBits;
- int atmInterfaceMaxActiveVciBits;
- int atmInterfaceIlmiVpi;
- int atmInterfaceIlmiVci;
- int atmInterfaceAddressType;
- char atmInterfaceAdminAddress[40];
- unsigned long atmInterfaceMyNeighborIpAddress;
- char atmInterfaceMyNeighborIfName[20];
- int atmInterfaceCurrentMaxVpiBits;
- int atmInterfaceCurrentMaxVciBits;
- char atmInterfaceSubscrAddress[40];
- int flags;
-}atmIfConfEntry;
-
-typedef struct atmTrafficDescParamEntry {
- /* Following three parameters are used to update VCC QoS values */
- int ifIndex;
- short atmVclvpi;
- int atmVclvci;
-
- unsigned int atmTrafficParamIndex;
- unsigned char traffic_class;
- int max_pcr;
- /* Subramani: Added min_pcr */
- int min_pcr;
- int cdv;
- int scr;
- int mbs;
- int atmTrafficRowStatus;
- int atmTrafficFrameDiscard;
- struct list_head vpivci_head;
- struct list_head list;
-}atmTrafficDescParamEntry;
-
-
-typedef struct atmVclEntry {
- int ifIndex;
- short atmVclvpi;
- int atmVclvci;
- char vpivci[20];
- int atmVclAdminStatus;
- int atmVclOperStatus;
- unsigned long atmVclLastChange;
- struct atmTrafficDescParamEntry *atmVclRxTrafficPtr;
- struct atmTrafficDescParamEntry *atmVclTxTrafficPtr;
- unsigned char atmVccAalType;
- unsigned int atmVccAal5TxSduSize;
- unsigned int atmVccAal5RxSduSize;
- int atmVccAal5Encap;
- int atmVclRowStatus;
- int atmVclCastType;
- int atmVclConnKind;
- struct list_head list;
- int flags;
-}atmVclEntry;
-
-
-typedef union union_atmptrs {
- struct atmIfConfEntry *atmIfConfEntry_ptr;
- struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr;
- struct atmVclEntry *atmVclEntry_ptr;
-}union_atmptrs;
-
-/* ATM Character device major number */
-#define ATM_MEI_MAJOR 107
-
-/* Protocol Constants */
-#define IFX_PROTO_RAW 0
-#define IFX_PROTO_BR2684 1
-#define IFX_PROTO_PPPOATM 2
-#define IFX_PROTO_CLIP 3
-
-/* IOCTL Command Set for ATM-MIB */
-#define GET_ATM_IF_CONF_DATA 0x0AB0
-#define SET_ATM_IF_CONF_DATA 0x0AB1
-
-#define SET_ATM_QOS_DATA 0x0BC0
-
-#define GET_ATM_VCL_DATA 0x0CD0
-#define SET_ATM_VCL_DATA 0x0CD1
-
-#define FIND_VCC_IN_KERNEL 0x0DE0
-
-/* User defined flags for VCL Table */
-#define ATMVCCAAL5CPCSTRANSMITSDUSIZE 9
-#define ATMVCCAAL5CPCSRECEIVESDUSIZE 10
-
-#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */
-
-#endif //AMAZON_ATM_MIB_H
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h
deleted file mode 100644
index 65f14e405f..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h
+++ /dev/null
@@ -1,96 +0,0 @@
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-typedef unsigned char UINT8;
-typedef signed char INT8;
-typedef unsigned short UINT16;
-typedef signed short INT16;
-typedef unsigned int UINT32;
-typedef signed int INT32;
-typedef unsigned long long UINT64;
-typedef signed long long INT64;
-
-#define REG8( addr ) (*(volatile UINT8 *) (addr))
-#define REG16( addr ) (*(volatile UINT16 *)(addr))
-#define REG32( addr ) (*(volatile UINT32 *)(addr))
-#define REG64( addr ) (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr) REG8(addr)
-#define READ_FPI_16BIT(addr) REG16(addr)
-#define READ_FPI_32BIT(addr) REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE 0x00000000
-#define IFX_CLC_DISABLE 0x00000001
-#define IFX_CLC_DISABLE_STATUS 0x00000002
-#define IFX_CLC_SUSPEND_ENABLE 0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET 8
-#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES 50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h
deleted file mode 100644
index e5d73ad4ec..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * ifx_ssc.h defines some data sructures used in ifx_ssc.c
- *
- * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
- *
- *
- */
-
-#ifndef __IFX_SSC_H
-#define __IFX_SSC_H
-#ifdef __KERNEL__
-#include <asm/amazon/ifx_ssc_defines.h>
-#endif //__KERNEL__
-
-#define PORT_CNT 1 // assume default value
-
-/* symbolic constants to be used in SSC routines */
-
-// ### TO DO: bad performance
-#define IFX_SSC_TXFIFO_ITL 1
-#define IFX_SSC_RXFIFO_ITL 1
-
-
-
-struct ifx_ssc_statistics{
- unsigned int abortErr; /* abort error */
- unsigned int modeErr; /* master/slave mode error */
- unsigned int txOvErr; /* TX Overflow error */
- unsigned int txUnErr; /* TX Underrun error */
- unsigned int rxOvErr; /* RX Overflow error */
- unsigned int rxUnErr; /* RX Underrun error */
- unsigned int rxBytes;
- unsigned int txBytes;
-};
-
-
-struct ifx_ssc_hwopts {
- unsigned int AbortErrDetect :1; /* Abort Error detection (in slave mode) */
- unsigned int rxOvErrDetect :1; /* Receive Overflow Error detection */
- unsigned int rxUndErrDetect :1; /* Receive Underflow Error detection */
- unsigned int txOvErrDetect :1; /* Transmit Overflow Error detection */
- unsigned int txUndErrDetect :1; /* Transmit Underflow Error detection */
- unsigned int echoMode :1; /* Echo mode */
- unsigned int loopBack :1; /* Loopback mode */
- unsigned int idleValue :1; /* Idle value */
- unsigned int clockPolarity :1; /* Idle clock is high or low */
- unsigned int clockPhase :1; /* Tx on trailing or leading edge*/
- unsigned int headingControl :1; /* LSB first or MSB first */
- unsigned int dataWidth :6; /* from 2 up to 32 bits */
- unsigned int masterSelect :1; /* Master or Slave mode */
- unsigned int modeRxTx :2; /* rx/tx mode */
- unsigned int gpoCs :8; /* choose outputs to use for chip select */
- unsigned int gpoInv :8; /* invert GPO outputs */
-};
-
-
-struct ifx_ssc_frm_opts {
- bool FrameEnable; // SFCON.SFEN
- unsigned int DataLength; // SFCON.DLEN
- unsigned int PauseLength; // SFCON.PLEN
- unsigned int IdleData; // SFCON.IDAT
- unsigned int IdleClock; // SFCON.ICLK
- bool StopAfterPause; // SFCON.STOP
-};
-
-struct ifx_ssc_frm_status {
- bool DataBusy; // SFSTAT.DBSY
- bool PauseBusy; // SFSTAT.PBSY
- unsigned int DataCount; // SFSTAT.DCNT
- unsigned int PauseCount; // SFSTAT.PCNT
- bool EnIntAfterData; // SFCON.IBEN
- bool EnIntAfterPause;// SFCON.IAEN
-};
-
-typedef struct {
- char *buf;
- size_t len;
-} ifx_ssc_buf_item_t;
-
-
-// data structures for batch execution
-typedef union {
- struct {
- bool save_options;
- } init;
- ifx_ssc_buf_item_t read;
- ifx_ssc_buf_item_t write;
- ifx_ssc_buf_item_t rd_wr;
- unsigned int set_baudrate;
- struct ifx_ssc_frm_opts set_frm;
- unsigned int set_gpo;
- struct ifx_ssc_hwopts set_hwopts;
-}ifx_ssc_batch_cmd_param;
-
-struct ifx_ssc_batch_list {
- unsigned int cmd;
- ifx_ssc_batch_cmd_param cmd_param;
- struct ifx_ssc_batch_list *next;
-};
-
-#ifdef __KERNEL__
-#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
-
-
-struct ifx_ssc_port{
- unsigned long mapbase;
- struct ifx_ssc_hwopts opts;
- struct ifx_ssc_statistics stats;
- struct ifx_ssc_frm_status frm_status;
- struct ifx_ssc_frm_opts frm_opts;
- /* wait queue for ifx_ssc_read() */
- wait_queue_head_t rwait, pwait;
- int port_nr;
- char port_is_open; /* exclusive open - boolean */
-// int no_of_bits; /* number of _valid_ bits */
-// int elem_size; /* shift for element (no of bytes)*/
- /* buffer and pointers to the read/write position */
- char *rxbuf; /* buffer for RX */
- char *rxbuf_end; /* buffer end pointer for RX */
- volatile char *rxbuf_ptr; /* buffer write pointer for RX */
- char *txbuf; /* buffer for TX */
- char *txbuf_end; /* buffer end pointer for TX */
- volatile char *txbuf_ptr; /* buffer read pointer for TX */
- unsigned int baud;
- /* each channel has its own interrupts */
- /* (transmit/receive/error/frame) */
- unsigned int txirq, rxirq, errirq, frmirq;
-};
-/* default values for SSC configuration */
-// values of CON
-#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
-#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
-#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
-#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
-#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
-#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
-#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
-#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
-#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
-#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
-// other values
-#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
-#define IFX_SSC_DEF_BAUDRATE 1000000
-#define IFX_SSC_DEF_RMC 0x10
-
-#define IFX_SSC_DEF_TXFIFO_FL 8
-#define IFX_SSC_DEF_RXFIFO_FL 1
-
-#if 1 //TODO
-#define IFX_SSC_DEF_GPO_CS 2 /* no chip select */
-#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
-#else
-#error "what is ur Chip Select???"
-#endif
-#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
-#if 0
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
-#endif
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT
-#endif /* __KERNEL__ */
-
-// batch execution commands
-#define IFX_SSC_BATCH_CMD_INIT 1
-#define IFX_SSC_BATCH_CMD_READ 2
-#define IFX_SSC_BATCH_CMD_WRITE 3
-#define IFX_SSC_BATCH_CMD_RD_WR 4
-#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
-#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
-#define IFX_SSC_BATCH_CMD_SET_FRM 7
-#define IFX_SSC_BATCH_CMD_SET_GPO 8
-#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
-//#define IFX_SSC_BATCH_CMD_
-//#define IFX_SSC_BATCH_CMD_
-#define IFX_SSC_BATCH_CMD_END_EXEC 0
-
-/* Macros to configure SSC hardware */
-/* headingControl: */
-#define IFX_SSC_LSB_FIRST 0
-#define IFX_SSC_MSB_FIRST 1
-/* dataWidth: */
-#define IFX_SSC_MIN_DATA_WIDTH 2
-#define IFX_SSC_MAX_DATA_WIDTH 32
-/* master/slave mode select */
-#define IFX_SSC_MASTER_MODE 1
-#define IFX_SSC_SLAVE_MODE 0
-/* rx/tx mode */
-// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
-#define IFX_SSC_MODE_RXTX 0
-#define IFX_SSC_MODE_RX 1
-#define IFX_SSC_MODE_TX 2
-#define IFX_SSC_MODE_OFF 3
-#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
-
-/* GPO values */
-#define IFX_SSC_MAX_GPO_OUT 7
-
-#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
-
-/***********************/
-/* defines for ioctl's */
-/***********************/
-#define IFX_SSC_IOCTL_MAGIC 'S'
-/* read out the statistics */
-#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
-/* clear the statistics */
-#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
-/* set the baudrate */
-#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
-/* get the current baudrate */
-#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
-/* set hardware options */
-#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
-/* get the current hardware options */
-#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
-/* set transmission mode */
-#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
-/* get the current transmission mode */
-#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
-/* abort transmission */
-#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
-#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
-
-/* set general purpose outputs */
-#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
-/* clear general purpose outputs */
-#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
-/* get general purpose outputs */
-#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
-
-/*** serial framing ***/
-/* get status of serial framing */
-#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
-/* get counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
-/* set counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
-
-
-/*** batch execution ***/
-/* do batch execution */
-#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
-
-
-#ifdef __KERNEL__
-// routines from ifx_ssc.c
-// ### TO DO
-/* kernel interface for read and write */
-ssize_t ifx_ssc_kread(int, char *, size_t);
-ssize_t ifx_ssc_kwrite(int, const char *, size_t);
-
-#ifdef CONFIG_IFX_VP_KERNEL_TEST
-void ifx_ssc_tc(void);
-#endif // CONFIG_IFX_VP_KERNEL_TEST
-
-#endif //__KERNEL__
-#endif // __IFX_SSC_H
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h
deleted file mode 100644
index 46157dcbd6..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h
+++ /dev/null
@@ -1,552 +0,0 @@
-#ifndef IFX_SSC_DEFINES_H
-#define IFX_SSC_DEFINES_H
-
-#include "ifx_peripheral_definitions.h"
-
-/* maximum SSC FIFO size */
-#define IFX_SSC_MAX_FIFO_SIZE 32
-
-/* register map of SSC */
-
-/* address of the Clock Control Register of the SSC */
-#define IFX_SSC_CLC 0x00000000
-/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
- bit 1 is hardware modified*/
-#define IFX_SSC_CLC_readmask 0x00FFFFEF
-#define IFX_SSC_CLC_writemask 0x00FFFF3D
-#define IFX_SSC_CLC_hwmask 0x00000002
-#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
-
-/* address of Port Input Select Register of the SSC */
-#define IFX_SSC_PISEL 0x00000004
-/* IFX_SSC_PISEL register is significant in lowest three bits only */
-#define IFX_SSC_PISEL_readmask 0x00000007
-#define IFX_SSC_PISEL_writemask 0x00000007
-#define IFX_SSC_PISEL_hwmask 0x00000000
-#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
-
-/* address of Identification Register of the SSC */
-#define IFX_SSC_ID 0x00000008
-/* IFX_SSC_ID register is significant in no bit */
-#define IFX_SSC_ID_readmask 0x0000FF3F
-#define IFX_SSC_ID_writemask 0x00000000
-#define IFX_SSC_ID_hwmask 0x00000000
-#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
-
-/* address of the Control Register of the SSC */
-#define IFX_SSC_CON 0x00000010
-/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
-#define IFX_SSC_CON_readmask 0x01DF1FFF
-#define IFX_SSC_CON_writemask 0x01DF1FFF
-#define IFX_SSC_CON_hwmask 0x00000000
-#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
-
-
-/* address of the Status Register of the SSC */
-#define IFX_SSC_STATE 0x00000014
-/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
- all bits except 1:0 are hardware modified */
-#define IFX_SSC_STATE_readmask 0x771F3F87
-#define IFX_SSC_STATE_writemask 0x00000000
-#define IFX_SSC_STATE_hwmask 0x771F3F84
-#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
-
-/* address of the Write Hardware Modified Control Register Bits of the SSC */
-#define IFX_SSC_WHBSTATE 0x00000018
-/* IFX_SSC_WHBSTATE register is write only */
-#define IFX_SSC_WHBSTATE_readmask 0x00000000
-#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
-#define IFX_SSC_WHBSTATE_hwmask 0x00000000
-#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
-
-/* address of the Baudrate Timer Reload Register of the SSC */
-#define IFX_SSC_BR 0x00000040
-/* IFX_SSC_BR register is significant in bit 15 downto 0*/
-#define IFX_SSC_BR_readmask 0x0000FFFF
-#define IFX_SSC_BR_writemask 0x0000FFFF
-#define IFX_SSC_BR_hwmask 0x00000000
-#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
-
-/* address of the Baudrate Timer Status Register of the SSC */
-#define IFX_SSC_BRSTAT 0x00000044
-/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
-#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_writemask 0x00000000
-#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
-
-/* address of the Transmitter Buffer Register of the SSC */
-#define IFX_SSC_TB 0x00000020
-/* IFX_SSC_TB register is significant in bit 31 downto 0*/
-#define IFX_SSC_TB_readmask 0xFFFFFFFF
-#define IFX_SSC_TB_writemask 0xFFFFFFFF
-#define IFX_SSC_TB_hwmask 0x00000000
-#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
-
-/* address of the Reciver Buffer Register of the SSC */
-#define IFX_SSC_RB 0x00000024
-/* IFX_SSC_RB register is significant in no bits*/
-#define IFX_SSC_RB_readmask 0xFFFFFFFF
-#define IFX_SSC_RB_writemask 0x00000000
-#define IFX_SSC_RB_hwmask 0xFFFFFFFF
-#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
-
-/* address of the Receive FIFO Control Register of the SSC */
-#define IFX_SSC_RXFCON 0x00000030
-/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_RXFCON_readmask 0x00003F03
-#define IFX_SSC_RXFCON_writemask 0x00003F03
-#define IFX_SSC_RXFCON_hwmask 0x00000000
-#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
-
-/* address of the Transmit FIFO Control Register of the SSC */
-#define IFX_SSC_TXFCON 0x00000034
-/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_TXFCON_readmask 0x00003F03
-#define IFX_SSC_TXFCON_writemask 0x00003F03
-#define IFX_SSC_TXFCON_hwmask 0x00000000
-#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
-
-/* address of the FIFO Status Register of the SSC */
-#define IFX_SSC_FSTAT 0x00000038
-/* IFX_SSC_FSTAT register is significant in no bit*/
-#define IFX_SSC_FSTAT_readmask 0x00003F3F
-#define IFX_SSC_FSTAT_writemask 0x00000000
-#define IFX_SSC_FSTAT_hwmask 0x00003F3F
-#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
-
-/* address of the Data Frame Control register of the SSC */
-#define IFX_SSC_SFCON 0x00000060
-#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
-#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
-#define IFX_SSC_SFCON_hwmask 0x00000000
-#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
-
-/* address of the Data Frame Status register of the SSC */
-#define IFX_SSC_SFSTAT 0x00000064
-#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_writemask 0x00000000
-#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
-
-/* address of the General Purpose Output Control register of the SSC */
-#define IFX_SSC_GPOCON 0x00000070
-#define IFX_SSC_GPOCON_readmask 0x0000FFFF
-#define IFX_SSC_GPOCON_writemask 0x0000FFFF
-#define IFX_SSC_GPOCON_hwmask 0x00000000
-#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
-
-/* address of the General Purpose Output Status register of the SSC */
-#define IFX_SSC_GPOSTAT 0x00000074
-#define IFX_SSC_GPOSTAT_readmask 0x000000FF
-#define IFX_SSC_GPOSTAT_writemask 0x00000000
-#define IFX_SSC_GPOSTAT_hwmask 0x00000000
-#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
-
-/* address of the Force GPO Status register of the SSC */
-#define IFX_SSC_WHBGPOSTAT 0x00000078
-#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
-#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
-
-/* address of the Receive Request Register of the SSC */
-#define IFX_SSC_RXREQ 0x00000080
-#define IFX_SSC_RXREQ_readmask 0x0000FFFF
-#define IFX_SSC_RXREQ_writemask 0x0000FFFF
-#define IFX_SSC_RXREQ_hwmask 0x00000000
-#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
-
-/* address of the Receive Count Register of the SSC */
-#define IFX_SSC_RXCNT 0x00000084
-#define IFX_SSC_RXCNT_readmask 0x0000FFFF
-#define IFX_SSC_RXCNT_writemask 0x00000000
-#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
-#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
-
-/* address of the DMA Configuration Register of the SSC */
-#define IFX_SSC_DMACON 0x000000EC
-#define IFX_SSC_DMACON_readmask 0x0000FFFF
-#define IFX_SSC_DMACON_writemask 0x00000000
-#define IFX_SSC_DMACON_hwmask 0x0000FFFF
-#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
-
-//------------------------------------------------------
-// interrupt register for enabling interrupts, mask register of irq_reg
-#define IFX_SSC_IRN_EN 0xF4
-// read/write
-#define IFX_SSC_IRN_EN_readmask 0x0000000F
-#define IFX_SSC_IRN_EN_writemask 0x0000000F
-#define IFX_SSC_IRN_EN_hwmask 0x00000000
-#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
-
-// interrupt register for accessing interrupts
-#define IFX_SSC_IRN_CR 0xF8
-// read/write
-#define IFX_SSC_IRN_CR_readmask 0x0000000F
-#define IFX_SSC_IRN_CR_writemask 0x0000000F
-#define IFX_SSC_IRN_CR_hwmask 0x0000000F
-#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
-
-// interrupt register for stimulating interrupts
-#define IFX_SSC_IRN_ICR 0xFC
-// read/write
-#define IFX_SSC_IRN_ICR_readmask 0x0000000F
-#define IFX_SSC_IRN_ICR_writemask 0x0000000F
-#define IFX_SSC_IRN_ICR_hwmask 0x00000000
-#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
-
-//---------------------------------------------------------------------
-// Number of IRQs and bitposition of IRQ
-#define IFX_SSC_NUM_IRQ 4
-#define IFX_SSC_T_BIT 0x00000001
-#define IFX_SSC_R_BIT 0x00000002
-#define IFX_SSC_E_BIT 0x00000004
-#define IFX_SSC_F_BIT 0x00000008
-
-/* bit masks for SSC registers */
-
-/* ID register */
-#define IFX_SSC_PERID_REV_MASK 0x0000001F
-#define IFX_SSC_PERID_CFG_MASK 0x00000020
-#define IFX_SSC_PERID_ID_MASK 0x0000FF00
-#define IFX_SSC_PERID_REV_OFFSET 0
-#define IFX_SSC_PERID_CFG_OFFSET 5
-#define IFX_SSC_PERID_ID_OFFSET 8
-#define IFX_SSC_PERID_ID 0x45
-#define IFX_SSC_PERID_DMA_ON 0x00000020
-#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
-#define IFX_SSC_PERID_RXFS_OFFSET 16
-#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
-#define IFX_SSC_PERID_TXFS_OFFSET 24
-
-/* PISEL register */
-#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
-#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
-#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
-#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
-#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
-#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
-
-
-/* IFX_SSC_CON register */
-#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
-#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
-#define IFX_SSC_CON_IDLE_HIGH 0x00800000
-#define IFX_SSC_CON_IDLE_LOW 0x00000000
-#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
-#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
-#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
-#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
-#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
-
-#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
-#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
-
-#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
-#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
-#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
-#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
-#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
-#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
-#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
-#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
-
-#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
-#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
-#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
-#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
-#define IFX_SSC_CON_CLOCK_FALL 0x00000040
-#define IFX_SSC_CON_CLOCK_RISE 0x00000000
-#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
-#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
-#define IFX_SSC_CON_MSB_FIRST 0x00000010
-#define IFX_SSC_CON_LSB_FIRST 0x00000000
-#define IFX_SSC_CON_ENABLE_CSB 0x00000008
-#define IFX_SSC_CON_DISABLE_CSB 0x00000000
-#define IFX_SSC_CON_INVERT_CSB 0x00000004
-#define IFX_SSC_CON_TRUE_CSB 0x00000000
-#define IFX_SSC_CON_RX_OFF 0x00000002
-#define IFX_SSC_CON_RX_ON 0x00000000
-#define IFX_SSC_CON_TX_OFF 0x00000001
-#define IFX_SSC_CON_TX_ON 0x00000000
-
-
-/* IFX_SSC_STATE register */
-#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
-#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
-#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
-#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
-#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
-#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
-#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
-#define IFX_SSC_STATE_BUSY 0x00002000
-#define IFX_SSC_STATE_RX_UFL 0x00001000
-#define IFX_SSC_STATE_TX_UFL 0x00000800
-#define IFX_SSC_STATE_ABORT_ERR 0x00000400
-#define IFX_SSC_STATE_RX_OFL 0x00000200
-#define IFX_SSC_STATE_TX_OFL 0x00000100
-#define IFX_SSC_STATE_MODE_ERR 0x00000080
-#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
-#define IFX_SSC_STATE_IS_MASTER 0x00000002
-#define IFX_SSC_STATE_IS_ENABLED 0x00000001
-
-/* WHBSTATE register */
-#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
-#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
-#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
-
-#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
-#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
-#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
-
-#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
-#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
-
-#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
-#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
-
-#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
-#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
-
-#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
-#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
-
-#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
-#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
-#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
-#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
-#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
-#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
-#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
-#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
-#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
-#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
-
-/* BR register */
-#define IFX_SSC_BR_BAUDRATE_OFFSET 0
-#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
-
-/* BR_STAT register */
-#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
-#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
-
-/* TB register */
-#define IFX_SSC_TB_DATA_OFFSET 0
-#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
-
-/* RB register */
-#define IFX_SSC_RB_DATA_OFFSET 0
-#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
-
-
-/* RXFCON and TXFCON registers */
-#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
-#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
-#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
-#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
-#define IFX_SSC_XFCON_ITL_OFFSET 8
-
-/* FSTAT register */
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
-
-/* GPOCON register */
-#define IFX_SSC_GPOCON_INVOUT0_POS 0
-#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
-#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
-#define IFX_SSC_GPOCON_INVOUT1_POS 1
-#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
-#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
-#define IFX_SSC_GPOCON_INVOUT2_POS 2
-#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
-#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
-#define IFX_SSC_GPOCON_INVOUT3_POS 3
-#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
-#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
-#define IFX_SSC_GPOCON_INVOUT4_POS 4
-#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
-#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
-#define IFX_SSC_GPOCON_INVOUT5_POS 5
-#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
-#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
-#define IFX_SSC_GPOCON_INVOUT6_POS 6
-#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
-#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
-#define IFX_SSC_GPOCON_INVOUT7_POS 7
-#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
-#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
-#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
-#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
-
-#define IFX_SSC_GPOCON_ISCSB0_POS 8
-#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
-#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
-#define IFX_SSC_GPOCON_ISCSB1_POS 9
-#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
-#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
-#define IFX_SSC_GPOCON_ISCSB2_POS 10
-#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
-#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
-#define IFX_SSC_GPOCON_ISCSB3_POS 11
-#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
-#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
-#define IFX_SSC_GPOCON_ISCSB4_POS 12
-#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
-#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
-#define IFX_SSC_GPOCON_ISCSB5_POS 13
-#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
-#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
-#define IFX_SSC_GPOCON_ISCSB6_POS 14
-#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
-#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
-#define IFX_SSC_GPOCON_ISCSB7_POS 15
-#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
-#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
-#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
-#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
-
-/* GPOSTAT register */
-#define IFX_SSC_GPOSTAT_OUT0 0x00000001
-#define IFX_SSC_GPOSTAT_OUT1 0x00000002
-#define IFX_SSC_GPOSTAT_OUT2 0x00000004
-#define IFX_SSC_GPOSTAT_OUT3 0x00000008
-#define IFX_SSC_GPOSTAT_OUT4 0x00000010
-#define IFX_SSC_GPOSTAT_OUT5 0x00000020
-#define IFX_SSC_GPOSTAT_OUT6 0x00000040
-#define IFX_SSC_GPOSTAT_OUT7 0x00000080
-#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
-
-/* WHBGPOSTAT register */
-#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
-#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
-#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
-#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
-#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
-#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
-#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
-#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
-
-#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
-
-
-#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
-#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
-#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
-#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
-#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
-#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
-#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
-#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
-#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
-#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
-#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
-#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
-#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
-#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
-#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
-#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
-#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
-
-/* SFCON register */
-#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
-#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
-#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
-#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
-#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
-#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
-#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
-#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
-#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
-#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
-#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
-#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
-#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
-
-#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
-#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
-
-/* SFSTAT register */
-#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
-#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
-#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
-#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
-
-#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
-#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
-
-/* RXREQ register */
-#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
-#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
-
-/* RXCNT register */
-#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
-#define IFX_SSC_RXCNT_TODO_OFFSET 0
-
-/* DMACON register */
-#define IFX_SSC_DMACON_RXON 0x00000001
-#define IFX_SSC_DMACON_RXOFF 0x00000000
-#define IFX_SSC_DMACON_TXON 0x00000002
-#define IFX_SSC_DMACON_TXOFF 0x00000000
-#define IFX_SSC_DMACON_DMAON 0x00000003
-#define IFX_SSC_DMACON_DMAOFF 0x00000000
-#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
-#define IFX_SSC_DMACON_CLASS_OFFSET 2
-
-/* register access macros */
-#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
-#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
-
-#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
-#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
-#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
-#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
-#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
-#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
-
-#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
-#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
-
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/irq.h b/target/linux/amazon/files/include/asm-mips/amazon/irq.h
deleted file mode 100644
index c575dd64b2..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/irq.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* irq.h - AMAZON interrupts */
-
-#ifndef __AMAZON_IRQ
-#define __AMAZON_IRQ
-
-/************************************************************************
- * Interrupt information
-*************************************************************************/
-
-/* these vectors are to handle the interrupts from the internal AMAZON
- interrupt controller. THe INT_NUM values are really just indices into
- an array and are set up so that we can use the INT_NUM as a shift
- to calculate a mask value. */
-#define INT_NUM_IRQ0 8
-#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM0_IRL1 (INT_NUM_IRQ0 + 1)
-#define INT_NUM_IM0_IRL2 (INT_NUM_IRQ0 + 2)
-#define INT_NUM_IM0_IRL3 (INT_NUM_IRQ0 + 3)
-#define INT_NUM_IM0_IRL4 (INT_NUM_IRQ0 + 4)
-#define INT_NUM_IM0_IRL5 (INT_NUM_IRQ0 + 5)
-#define INT_NUM_IM0_IRL6 (INT_NUM_IRQ0 + 6)
-#define INT_NUM_IM0_IRL7 (INT_NUM_IRQ0 + 7)
-#define INT_NUM_IM0_IRL8 (INT_NUM_IRQ0 + 8)
-#define INT_NUM_IM0_IRL9 (INT_NUM_IRQ0 + 9)
-#define INT_NUM_IM0_IRL10 (INT_NUM_IRQ0 + 10)
-#define INT_NUM_IM0_IRL11 (INT_NUM_IRQ0 + 11)
-#define INT_NUM_IM0_IRL12 (INT_NUM_IRQ0 + 12)
-#define INT_NUM_IM0_IRL13 (INT_NUM_IRQ0 + 13)
-#define INT_NUM_IM0_IRL14 (INT_NUM_IRQ0 + 14)
-#define INT_NUM_IM0_IRL15 (INT_NUM_IRQ0 + 15)
-#define INT_NUM_IM0_IRL16 (INT_NUM_IRQ0 + 16)
-#define INT_NUM_IM0_IRL17 (INT_NUM_IRQ0 + 17)
-#define INT_NUM_IM0_IRL18 (INT_NUM_IRQ0 + 18)
-#define INT_NUM_IM0_IRL19 (INT_NUM_IRQ0 + 19)
-#define INT_NUM_IM0_IRL20 (INT_NUM_IRQ0 + 20)
-#define INT_NUM_IM0_IRL21 (INT_NUM_IRQ0 + 21)
-#define INT_NUM_IM0_IRL22 (INT_NUM_IRQ0 + 22)
-#define INT_NUM_IM0_IRL23 (INT_NUM_IRQ0 + 23)
-#define INT_NUM_IM0_IRL24 (INT_NUM_IRQ0 + 24)
-#define INT_NUM_IM0_IRL25 (INT_NUM_IRQ0 + 25)
-#define INT_NUM_IM0_IRL26 (INT_NUM_IRQ0 + 26)
-#define INT_NUM_IM0_IRL27 (INT_NUM_IRQ0 + 27)
-#define INT_NUM_IM0_IRL28 (INT_NUM_IRQ0 + 28)
-#define INT_NUM_IM0_IRL29 (INT_NUM_IRQ0 + 29)
-#define INT_NUM_IM0_IRL30 (INT_NUM_IRQ0 + 30)
-#define INT_NUM_IM0_IRL31 (INT_NUM_IRQ0 + 31)
-
-#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
-#define INT_NUM_IM1_IRL1 (INT_NUM_IM1_IRL0 + 1)
-#define INT_NUM_IM1_IRL2 (INT_NUM_IM1_IRL0 + 2)
-#define INT_NUM_IM1_IRL3 (INT_NUM_IM1_IRL0 + 3)
-#define INT_NUM_IM1_IRL4 (INT_NUM_IM1_IRL0 + 4)
-#define INT_NUM_IM1_IRL5 (INT_NUM_IM1_IRL0 + 5)
-#define INT_NUM_IM1_IRL6 (INT_NUM_IM1_IRL0 + 6)
-#define INT_NUM_IM1_IRL7 (INT_NUM_IM1_IRL0 + 7)
-#define INT_NUM_IM1_IRL8 (INT_NUM_IM1_IRL0 + 8)
-#define INT_NUM_IM1_IRL9 (INT_NUM_IM1_IRL0 + 9)
-#define INT_NUM_IM1_IRL10 (INT_NUM_IM1_IRL0 + 10)
-#define INT_NUM_IM1_IRL11 (INT_NUM_IM1_IRL0 + 11)
-#define INT_NUM_IM1_IRL12 (INT_NUM_IM1_IRL0 + 12)
-#define INT_NUM_IM1_IRL13 (INT_NUM_IM1_IRL0 + 13)
-#define INT_NUM_IM1_IRL14 (INT_NUM_IM1_IRL0 + 14)
-#define INT_NUM_IM1_IRL15 (INT_NUM_IM1_IRL0 + 15)
-#define INT_NUM_IM1_IRL16 (INT_NUM_IM1_IRL0 + 16)
-#define INT_NUM_IM1_IRL17 (INT_NUM_IM1_IRL0 + 17)
-#define INT_NUM_IM1_IRL18 (INT_NUM_IM1_IRL0 + 18)
-#define INT_NUM_IM1_IRL19 (INT_NUM_IM1_IRL0 + 19)
-#define INT_NUM_IM1_IRL20 (INT_NUM_IM1_IRL0 + 20)
-#define INT_NUM_IM1_IRL21 (INT_NUM_IM1_IRL0 + 21)
-#define INT_NUM_IM1_IRL22 (INT_NUM_IM1_IRL0 + 22)
-#define INT_NUM_IM1_IRL23 (INT_NUM_IM1_IRL0 + 23)
-#define INT_NUM_IM1_IRL24 (INT_NUM_IM1_IRL0 + 24)
-#define INT_NUM_IM1_IRL25 (INT_NUM_IM1_IRL0 + 25)
-#define INT_NUM_IM1_IRL26 (INT_NUM_IM1_IRL0 + 26)
-#define INT_NUM_IM1_IRL27 (INT_NUM_IM1_IRL0 + 27)
-#define INT_NUM_IM1_IRL28 (INT_NUM_IM1_IRL0 + 28)
-#define INT_NUM_IM1_IRL29 (INT_NUM_IM1_IRL0 + 29)
-#define INT_NUM_IM1_IRL30 (INT_NUM_IM1_IRL0 + 30)
-#define INT_NUM_IM1_IRL31 (INT_NUM_IM1_IRL0 + 31)
-
-#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
-#define INT_NUM_IM2_IRL1 (INT_NUM_IM2_IRL0 + 1)
-#define INT_NUM_IM2_IRL2 (INT_NUM_IM2_IRL0 + 2)
-#define INT_NUM_IM2_IRL3 (INT_NUM_IM2_IRL0 + 3)
-#define INT_NUM_IM2_IRL4 (INT_NUM_IM2_IRL0 + 4)
-#define INT_NUM_IM2_IRL5 (INT_NUM_IM2_IRL0 + 5)
-#define INT_NUM_IM2_IRL6 (INT_NUM_IM2_IRL0 + 6)
-#define INT_NUM_IM2_IRL7 (INT_NUM_IM2_IRL0 + 7)
-#define INT_NUM_IM2_IRL8 (INT_NUM_IM2_IRL0 + 8)
-#define INT_NUM_IM2_IRL9 (INT_NUM_IM2_IRL0 + 9)
-#define INT_NUM_IM2_IRL10 (INT_NUM_IM2_IRL0 + 10)
-#define INT_NUM_IM2_IRL11 (INT_NUM_IM2_IRL0 + 11)
-#define INT_NUM_IM2_IRL12 (INT_NUM_IM2_IRL0 + 12)
-#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13)
-#define INT_NUM_IM2_IRL14 (INT_NUM_IM2_IRL0 + 14)
-#define INT_NUM_IM2_IRL15 (INT_NUM_IM2_IRL0 + 15)
-#define INT_NUM_IM2_IRL16 (INT_NUM_IM2_IRL0 + 16)
-#define INT_NUM_IM2_IRL17 (INT_NUM_IM2_IRL0 + 17)
-#define INT_NUM_IM2_IRL18 (INT_NUM_IM2_IRL0 + 18)
-#define INT_NUM_IM2_IRL19 (INT_NUM_IM2_IRL0 + 19)
-#define INT_NUM_IM2_IRL20 (INT_NUM_IM2_IRL0 + 20)
-#define INT_NUM_IM2_IRL21 (INT_NUM_IM2_IRL0 + 21)
-#define INT_NUM_IM2_IRL22 (INT_NUM_IM2_IRL0 + 22)
-#define INT_NUM_IM2_IRL23 (INT_NUM_IM2_IRL0 + 23)
-#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24)
-#define INT_NUM_IM2_IRL25 (INT_NUM_IM2_IRL0 + 25)
-#define INT_NUM_IM2_IRL26 (INT_NUM_IM2_IRL0 + 26)
-#define INT_NUM_IM2_IRL27 (INT_NUM_IM2_IRL0 + 27)
-#define INT_NUM_IM2_IRL28 (INT_NUM_IM2_IRL0 + 28)
-#define INT_NUM_IM2_IRL29 (INT_NUM_IM2_IRL0 + 29)
-#define INT_NUM_IM2_IRL30 (INT_NUM_IM2_IRL0 + 30)
-#define INT_NUM_IM2_IRL31 (INT_NUM_IM2_IRL0 + 31)
-
-#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
-#define INT_NUM_IM3_IRL1 (INT_NUM_IM3_IRL0 + 1)
-#define INT_NUM_IM3_IRL2 (INT_NUM_IM3_IRL0 + 2)
-#define INT_NUM_IM3_IRL3 (INT_NUM_IM3_IRL0 + 3)
-#define INT_NUM_IM3_IRL4 (INT_NUM_IM3_IRL0 + 4)
-#define INT_NUM_IM3_IRL5 (INT_NUM_IM3_IRL0 + 5)
-#define INT_NUM_IM3_IRL6 (INT_NUM_IM3_IRL0 + 6)
-#define INT_NUM_IM3_IRL7 (INT_NUM_IM3_IRL0 + 7)
-#define INT_NUM_IM3_IRL8 (INT_NUM_IM3_IRL0 + 8)
-#define INT_NUM_IM3_IRL9 (INT_NUM_IM3_IRL0 + 9)
-#define INT_NUM_IM3_IRL10 (INT_NUM_IM3_IRL0 + 10)
-#define INT_NUM_IM3_IRL11 (INT_NUM_IM3_IRL0 + 11)
-#define INT_NUM_IM3_IRL12 (INT_NUM_IM3_IRL0 + 12)
-#define INT_NUM_IM3_IRL13 (INT_NUM_IM3_IRL0 + 13)
-#define INT_NUM_IM3_IRL14 (INT_NUM_IM3_IRL0 + 14)
-#define INT_NUM_IM3_IRL15 (INT_NUM_IM3_IRL0 + 15)
-#define INT_NUM_IM3_IRL16 (INT_NUM_IM3_IRL0 + 16)
-#define INT_NUM_IM3_IRL17 (INT_NUM_IM3_IRL0 + 17)
-#define INT_NUM_IM3_IRL18 (INT_NUM_IM3_IRL0 + 18)
-#define INT_NUM_IM3_IRL19 (INT_NUM_IM3_IRL0 + 19)
-#define INT_NUM_IM3_IRL20 (INT_NUM_IM3_IRL0 + 20)
-#define INT_NUM_IM3_IRL21 (INT_NUM_IM3_IRL0 + 21)
-#define INT_NUM_IM3_IRL22 (INT_NUM_IM3_IRL0 + 22)
-#define INT_NUM_IM3_IRL23 (INT_NUM_IM3_IRL0 + 23)
-#define INT_NUM_IM3_IRL24 (INT_NUM_IM3_IRL0 + 24)
-#define INT_NUM_IM3_IRL25 (INT_NUM_IM3_IRL0 + 25)
-#define INT_NUM_IM3_IRL26 (INT_NUM_IM3_IRL0 + 26)
-#define INT_NUM_IM3_IRL27 (INT_NUM_IM3_IRL0 + 27)
-#define INT_NUM_IM3_IRL28 (INT_NUM_IM3_IRL0 + 28)
-#define INT_NUM_IM3_IRL29 (INT_NUM_IM3_IRL0 + 29)
-#define INT_NUM_IM3_IRL30 (INT_NUM_IM3_IRL0 + 30)
-#define INT_NUM_IM3_IRL31 (INT_NUM_IM3_IRL0 + 31)
-
-#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
-#define INT_NUM_IM4_IRL1 (INT_NUM_IM4_IRL0 + 1)
-#define INT_NUM_IM4_IRL2 (INT_NUM_IM4_IRL0 + 2)
-#define INT_NUM_IM4_IRL3 (INT_NUM_IM4_IRL0 + 3)
-#define INT_NUM_IM4_IRL4 (INT_NUM_IM4_IRL0 + 4)
-#define INT_NUM_IM4_IRL5 (INT_NUM_IM4_IRL0 + 5)
-#define INT_NUM_IM4_IRL6 (INT_NUM_IM4_IRL0 + 6)
-#define INT_NUM_IM4_IRL7 (INT_NUM_IM4_IRL0 + 7)
-#define INT_NUM_IM4_IRL8 (INT_NUM_IM4_IRL0 + 8)
-#define INT_NUM_IM4_IRL9 (INT_NUM_IM4_IRL0 + 9)
-#define INT_NUM_IM4_IRL10 (INT_NUM_IM4_IRL0 + 10)
-#define INT_NUM_IM4_IRL11 (INT_NUM_IM4_IRL0 + 11)
-#define INT_NUM_IM4_IRL12 (INT_NUM_IM4_IRL0 + 12)
-#define INT_NUM_IM4_IRL13 (INT_NUM_IM4_IRL0 + 13)
-#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14)
-#define INT_NUM_IM4_IRL15 (INT_NUM_IM4_IRL0 + 15)
-#define INT_NUM_IM4_IRL16 (INT_NUM_IM4_IRL0 + 16)
-#define INT_NUM_IM4_IRL17 (INT_NUM_IM4_IRL0 + 17)
-#define INT_NUM_IM4_IRL18 (INT_NUM_IM4_IRL0 + 18)
-#define INT_NUM_IM4_IRL19 (INT_NUM_IM4_IRL0 + 19)
-#define INT_NUM_IM4_IRL20 (INT_NUM_IM4_IRL0 + 20)
-#define INT_NUM_IM4_IRL21 (INT_NUM_IM4_IRL0 + 21)
-#define INT_NUM_IM4_IRL22 (INT_NUM_IM4_IRL0 + 22)
-#define INT_NUM_IM4_IRL23 (INT_NUM_IM4_IRL0 + 23)
-#define INT_NUM_IM4_IRL24 (INT_NUM_IM4_IRL0 + 24)
-#define INT_NUM_IM4_IRL25 (INT_NUM_IM4_IRL0 + 25)
-#define INT_NUM_IM4_IRL26 (INT_NUM_IM4_IRL0 + 26)
-#define INT_NUM_IM4_IRL27 (INT_NUM_IM4_IRL0 + 27)
-#define INT_NUM_IM4_IRL28 (INT_NUM_IM4_IRL0 + 28)
-#define INT_NUM_IM4_IRL29 (INT_NUM_IM4_IRL0 + 29)
-#define INT_NUM_IM4_IRL30 (INT_NUM_IM4_IRL0 + 30)
-#define INT_NUM_IM4_IRL31 (INT_NUM_IM4_IRL0 + 31)
-
-/****** Interrupt Assigments ***********/
-#define AMAZON_DMA_INT INT_NUM_IM0_IRL0
-#define IFX_SSC_TIR INT_NUM_IM0_IRL29
-#define IFX_SSC_RIR INT_NUM_IM0_IRL30
-#define IFX_SSC_EIR INT_NUM_IM0_IRL31
-
-#define AMAZON_MEI_INT INT_NUM_IM2_IRL8
-
-#define AMAZONASC_TIR INT_NUM_IM4_IRL15/* TX interrupt */
-#define AMAZONASC_RIR INT_NUM_IM4_IRL16/* RX interrupt */
-#define AMAZONASC_EIR INT_NUM_IM4_IRL17/* ERROR interrupt */
-
-#define AMAZON_TIMER6_INT INT_NUM_IM1_IRL23
-
-#define AMAZON_SWIE_INT INT_NUM_IM3_IRL8
-#define AMAZON_CBM_INT INT_NUM_IM3_IRL9
-#define AMAZON_AAL5_INT INT_NUM_IM3_IRL10
-#define AMAZON_HTU_INT INT_NUM_IM3_IRL11
-#define AMAZON_QSB_INT INT_NUM_IM3_IRL12
-#define MIPS_CPU_TIMER_IRQ 7
-#endif /* __AMAZON_IRQ */
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/model.h b/target/linux/amazon/files/include/asm-mips/amazon/model.h
deleted file mode 100644
index 4e43ab5f19..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/model.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef AMAZON_MODEL_H
-#define AMAZON_MODEL_H
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-#define BOARD_SYSTEM_TYPE "AMAZON"
-#define SYSTEM_MODEL_NAME "Amazon Gateway Package 3.2 Version"
-#endif
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/port.h b/target/linux/amazon/files/include/asm-mips/amazon/port.h
deleted file mode 100644
index 21825794c5..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/port.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * port.h
- *
- * Global Amazon port driver header file
- *
- */
-
-/* Modification history */
-/* 21Jun2004 btxu Generate from Inca_IP project */
-
-
-#ifndef PORT_H
-#define PORT_H
-
-struct amazon_port_ioctl_parm {
- int port;
- int pin;
- int value;
-};
-#define AMAZON_PORT_IOC_MAGIC 0xbf
-#define AMAZON_PORT_IOCOD _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCPUDSEL _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCPUDEN _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCSTOFF _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCDIR _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCOUTPUT _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCINPUT _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCALTSEL0 _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm)
-#define AMAZON_PORT_IOCALTSEL1 _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm)
-
-int amazon_port_reserve_pin(int port, int pin, int module_id);
-int amazon_port_free_pin(int port, int pin, int module_id);
-int amazon_port_set_open_drain(int port, int pin, int module_id);
-int amazon_port_clear_open_drain(int port, int pin, int module_id);
-int amazon_port_set_pudsel(int port, int pin, int module_id);
-int amazon_port_clear_pudsel(int port, int pin, int module_id);
-int amazon_port_set_puden(int port, int pin, int module_id);
-int amazon_port_clear_puden(int port, int pin, int module_id);
-int amazon_port_set_stoff(int port, int pin, int module_id);
-int amazon_port_clear_stoff(int port, int pin, int module_id);
-int amazon_port_set_dir_out(int port, int pin, int module_id);
-int amazon_port_set_dir_in(int port, int pin, int module_id);
-int amazon_port_set_output(int port, int pin, int module_id);
-int amazon_port_clear_output(int port, int pin, int module_id);
-int amazon_port_get_input(int port, int pin, int module_id);
-
-int amazon_port_set_altsel0(int port, int pin, int module_id);
-int amazon_port_clear_altsel0(int port, int pin, int module_id);
-int amazon_port_set_altsel1(int port, int pin, int module_id);
-int amazon_port_clear_altsel1(int port, int pin, int module_id);
-
-
-#endif /* PORT_H */
-
-
diff --git a/target/linux/amazon/files/include/asm-mips/amazon/serial.h b/target/linux/amazon/files/include/asm-mips/amazon/serial.h
deleted file mode 100644
index 3ff3efc28d..0000000000
--- a/target/linux/amazon/files/include/asm-mips/amazon/serial.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* incaAscSio.h - (AMAZON) ASC UART tty driver header */
-
-#ifndef __AMAZON_ASC_H
-#define __AMAZON_ASC_H
-
-/* channel operating modes */
-#define ASCOPT_CSIZE 0x00000003
-#define ASCOPT_CS7 0x00000001
-#define ASCOPT_CS8 0x00000002
-#define ASCOPT_PARENB 0x00000004
-#define ASCOPT_STOPB 0x00000008
-#define ASCOPT_PARODD 0x00000010
-#define ASCOPT_CREAD 0x00000020
-
-#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY 0
-
-/* use fractional divider for baudrate settings */
-#define AMAZONASC_USE_FDV
-
-#ifdef AMAZONASC_USE_FDV
- #define AMAZONASC_FDV_LOW_BAUDRATE 71
-#ifdef CONFIG_USE_IKOS
- #define AMAZONASC_FDV_HIGH_BAUDRATE 443
-#else
- #define AMAZONASC_FDV_HIGH_BAUDRATE 498
-#endif //CONFIG_USE_IKOS
-#endif /*AMAZONASC_USE_FDV*/
-
-
-#define AMAZONASC_TXFIFO_FL 1
-#define AMAZONASC_RXFIFO_FL 1
-#define AMAZONASC_TXFIFO_FULL 16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define AMAZONASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
-
-#define AMAZONASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
-#define AMAZONASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
-#define AMAZONASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
-#define AMAZONASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR 0x00000001
-#define ASCCLC_DISS 0x00000002
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
- #define ASCCON_M_8SYNC 0x0
- #define ASCCON_M_8ASYNC 0x1
- #define ASCCON_M_8IRDAASYNC 0x2
- #define ASCCON_M_7ASYNCPAR 0x3
- #define ASCCON_M_9ASYNC 0x4
- #define ASCCON_M_8WAKEUPASYNC 0x5
- #define ASCCON_M_8ASYNCPAR 0x7
-#define ASCCON_STP 0x0008
-#define ASCCON_REN 0x0010
-#define ASCCON_PEN 0x0020
-#define ASCCON_FEN 0x0040
-#define ASCCON_OEN 0x0080
-#define ASCCON_PE 0x0100
-#define ASCCON_FE 0x0200
-#define ASCCON_OE 0x0400
-#define ASCCON_FDE 0x0800
-#define ASCCON_ODD 0x1000
-#define ASCCON_BRS 0x2000
-#define ASCCON_LB 0x4000
-#define ASCCON_R 0x8000
-#define ASCCON_ANY (ASCCON_PE|ASCCON_FE|ASCCON_OE)
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN 0x0010
-#define ASCWHBCON_SETREN 0x0020
-#define ASCWHBCON_CLRPE 0x0100
-#define ASCWHBCON_CLRFE 0x0200
-#define ASCWHBCON_CLROE 0x0400
-#define ASCWHBCON_SETPE 0x0800
-#define ASCWHBCON_SETFE 0x1000
-#define ASCWHBCON_SETOE 0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN 0x0001
-#define ASCABCON_AUREN 0x0002
-#define ASCABCON_ABSTEN 0x0004
-#define ASCABCON_ABDETEN 0x0008
-#define ASCABCON_FCDETEN 0x0010
-#define ASCABCON_EMMASK 0x0300
- #define ASCABCON_EMOFF 8
- #define ASCABCON_EM_DISAB 0x0
- #define ASCABCON_EM_DURAB 0x1
- #define ASCABCON_EM_ALWAYS 0x2
-#define ASCABCON_TXINV 0x0400
-#define ASCABCON_RXINV 0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK 0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN 0x0001
-#define ASCWHBABCON_CLRABEN 0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET 0x0001
-#define ASCABSTAT_FCCDET 0x0002
-#define ASCABSTAT_SCSDET 0x0004
-#define ASCABSTAT_SCCDET 0x0008
-#define ASCABSTAT_DETWAIT 0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET 0x0001
-#define ASCWHBABSTAT_SETFCSDET 0x0002
-#define ASCWHBABSTAT_CLRFCCDET 0x0004
-#define ASCWHBABSTAT_SETFCCDET 0x0008
-#define ASCWHBABSTAT_CLRSCSDET 0x0010
-#define ASCWHBABSTAT_SETSCSDET 0x0020
-#define ASCWHBABSTAT_SETSCCDET 0x0040
-#define ASCWHBABSTAT_CLRSCCDET 0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXTMEN 0x0004
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXTMEN 0x0004
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-#endif /* __AMAZON_ASC_H */
-
diff --git a/target/linux/amazon/image/Makefile b/target/linux/amazon/image/Makefile
deleted file mode 100644
index 08f3ba531d..0000000000
--- a/target/linux/amazon/image/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/BuildKernel
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
- mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \
- 0x80002000 \
- -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
-
- cp $(KDIR)/uImage $(BIN_DIR)/$(IMG_PREFIX)-uImage
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(BIN_DIR)/$(IMG_PREFIX)-$(1).image)
-endef
-
-define Image/Build
- cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/$(IMG_PREFIX)-$(1).image
- $(call Image/Build/$(1),$(1))
-endef
-
-
-$(eval $(call BuildImage))
diff --git a/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch b/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch
deleted file mode 100644
index 0aa37780a8..0000000000
--- a/target/linux/amazon/patches-3.3/000-mips-bad-intctl.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1593,7 +1593,16 @@ void __cpuinit per_cpu_trap_init(void)
- if (cpu_has_mips_r2) {
- cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
- cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
-+ if (!cp0_compare_irq)
-+ cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
- cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
-+ if (!cp0_perfcount_irq)
-+ cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+ if (arch_fixup_c0_irqs)
-+ arch_fixup_c0_irqs();
-+
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
- } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -139,9 +139,11 @@ extern void free_irqno(unsigned int irq)
- * IE7. Since R2 their number has to be read from the c0_intctl register.
- */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
-
- extern int cp0_compare_irq;
- extern int cp0_compare_irq_shift;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
-
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch b/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch
deleted file mode 100644
index 7078b37437..0000000000
--- a/target/linux/amazon/patches-3.3/010-mips_clocksource_init_war.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -23,6 +23,22 @@
-
- #ifndef CONFIG_MIPS_MT_SMTC
-
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register. 4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+ do { \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ irq_disable_hazard(); \
-+ } while (0)
-+
- static int mips_next_event(unsigned long delta,
- struct clock_event_device *evt)
- {
-@@ -32,6 +48,7 @@ static int mips_next_event(unsigned long
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-+ compare_change_hazard();
- res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
- return res;
- }
diff --git a/target/linux/amazon/patches-3.3/017-wdt-driver.patch b/target/linux/amazon/patches-3.3/017-wdt-driver.patch
deleted file mode 100644
index 005ee710ac..0000000000
--- a/target/linux/amazon/patches-3.3/017-wdt-driver.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
- obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
-+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
-
- # PARISC Architecture
-
diff --git a/target/linux/amazon/patches-3.3/100-board.patch b/target/linux/amazon/patches-3.3/100-board.patch
deleted file mode 100644
index b743052731..0000000000
--- a/target/linux/amazon/patches-3.3/100-board.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -120,6 +120,22 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config AMAZON
-+ bool "Amazon support (EXPERIMENTAL)"
-+ depends on EXPERIMENTAL
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+ select SWAP_IO_SPACE
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -813,6 +829,7 @@ config NLM_XLP_BOARD
-
- endchoice
-
-+source "arch/mips/amazon/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -6,6 +6,7 @@ platforms += ath79
- platforms += bcm47xx
- platforms += bcm63xx
- platforms += cavium-octeon
-+platforms += amazon
- platforms += cobalt
- platforms += dec
- platforms += emma
---- /dev/null
-+++ b/arch/mips/amazon/Platform
-@@ -0,0 +1,7 @@
-+#
-+# Infineon AMAZON boards
-+#
-+platform-$(CONFIG_AMAZON) += amazon/
-+cflags-$(CONFIG_AMAZON) += \
-+ -I$(srctree)/arch/mips/include/asm/mach-amazon
-+load-$(CONFIG_AMAZON) := 0xffffffff80002000
diff --git a/target/linux/amazon/patches-3.3/130-mtd_drivers.patch b/target/linux/amazon/patches-3.3/130-mtd_drivers.patch
deleted file mode 100644
index 6ce28e3fdd..0000000000
--- a/target/linux/amazon/patches-3.3/130-mtd_drivers.patch
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -57,3 +57,4 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
- obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
- obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
- obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
-+obj-$(CONFIG_AMAZON_MTD) += amazon.o
diff --git a/target/linux/amazon/patches-3.3/140-net_drivers.patch b/target/linux/amazon/patches-3.3/140-net_drivers.patch
deleted file mode 100644
index 9c840e67f9..0000000000
--- a/target/linux/amazon/patches-3.3/140-net_drivers.patch
+++ /dev/null
@@ -1,9 +0,0 @@
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -74,3 +74,6 @@ obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundr
- obj-$(CONFIG_NET_VENDOR_VIA) += via/
- obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
- obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
-+
-+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
-+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o
diff --git a/target/linux/amazon/patches-3.3/150-serial_driver.patch b/target/linux/amazon/patches-3.3/150-serial_driver.patch
deleted file mode 100644
index c6e7f39bd4..0000000000
--- a/target/linux/amazon/patches-3.3/150-serial_driver.patch
+++ /dev/null
@@ -1,7 +0,0 @@
---- a/drivers/tty/serial/Makefile
-+++ b/drivers/tty/serial/Makefile
-@@ -78,3 +78,4 @@ obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
- obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
- obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
- obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
-+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
diff --git a/target/linux/amazon/patches-3.3/160-cfi-swap.patch b/target/linux/amazon/patches-3.3/160-cfi-swap.patch
deleted file mode 100644
index 4a0009e432..0000000000
--- a/target/linux/amazon/patches-3.3/160-cfi-swap.patch
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1152,6 +1152,9 @@ static int __xipram do_write_oneword(str
- int retry_cnt = 0;
-
- adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr, FL_WRITING);
-@@ -1420,7 +1423,11 @@ static int __xipram do_write_buffer(stru
- z = 0;
- while(z < words * map_bankwidth(map)) {
- datum = map_word_load(map, buf);
-+#ifdef CONFIG_AMAZON
-+ map_write(map, datum, (adr + z) ^ 0x2);
-+#else
- map_write(map, datum, adr + z);
-+#endif
-
- z += map_bankwidth(map);
- buf += map_bankwidth(map);
-@@ -1665,6 +1672,9 @@ static int __xipram do_erase_oneblock(st
- int ret = 0;
-
- adr += chip->start;
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr, FL_ERASING);
-@@ -1793,6 +1803,10 @@ static int do_atmel_lock(struct map_info
- struct cfi_private *cfi = map->fldrv_priv;
- int ret;
-
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-+
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr + chip->start, FL_LOCKING);
- if (ret)
-@@ -1828,6 +1842,10 @@ static int do_atmel_unlock(struct map_in
- struct cfi_private *cfi = map->fldrv_priv;
- int ret;
-
-+#ifdef CONFIG_AMAZON
-+ adr ^= 2;
-+#endif
-+
- mutex_lock(&chip->mutex);
- ret = get_chip(map, chip, adr + chip->start, FL_UNLOCKING);
- if (ret)