aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch103
-rw-r--r--target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch4
-rw-r--r--target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch2
-rw-r--r--target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch2
-rw-r--r--target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch2
-rw-r--r--target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch2
6 files changed, 109 insertions, 6 deletions
diff --git a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
new file mode 100644
index 0000000000..57ed940fd1
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
@@ -0,0 +1,103 @@
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 12 Apr 2018 21:01:38 +0200
+Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues
+
+Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
+Setting up any gpio-hog in the device-tree for his device would
+"kill the bootup completely":
+
+| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
+| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
+| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
+| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
+| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
+| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
+| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
+
+This was also verified on a RT-AC58U (IPQ4018) which would
+no longer boot, if a gpio-hog was specified. (Tried forcing
+the USB LED PIN (GPIO0) to high.).
+
+The problem is that Pinctrl+GPIO registration is currently
+peformed in the following order in pinctrl-msm.c:
+ 1. pinctrl_register()
+ 2. gpiochip_add()
+ 3. gpiochip_add_pin_range()
+
+The actual error code -517 == -EPROBE_DEFER is coming from
+pinctrl_get_device_gpio_range(), which is called through:
+ gpiochip_add
+ of_gpiochip_add
+ of_gpiochip_scan_gpios
+ gpiod_hog
+ gpiochip_request_own_desc
+ __gpiod_request
+ chip->request
+ gpiochip_generic_request
+ pinctrl_gpio_request
+ pinctrl_get_device_gpio_range
+
+pinctrl_get_device_gpio_range() is unable to find any valid
+pin ranges, since nothing has been added to the pinctrldev_list yet.
+so the range can't be found, and the operation fails with -EPROBE_DEFER.
+
+This patch fixes the issue by adding the "gpio-ranges" property to
+the pinctrl device node of all upstream Qcom SoC. The pin ranges are
+then added by the gpio core.
+
+In order to remain compatible with older, existing DTs (and ACPI)
+a check for the "gpio-ranges" property has been added to
+msm_gpio_init(). This prevents the driver of adding the same entry
+to the pinctrldev_list twice.
+
+Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+
+Origin: other, https://patchwork.kernel.org/patch/10339127/
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
+ drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++-----
+ 14 files changed, 32 insertions(+), 6 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -166,6 +166,7 @@
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 100>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/drivers/pinctrl/qcom/pinctrl-msm.c
++++ b/drivers/pinctrl/qcom/pinctrl-msm.c
+@@ -831,11 +831,24 @@ static int msm_gpio_init(struct msm_pinc
+ return ret;
+ }
+
+- ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
+- if (ret) {
+- dev_err(pctrl->dev, "Failed to add pin range\n");
+- gpiochip_remove(&pctrl->chip);
+- return ret;
++ /*
++ * For DeviceTree-supported systems, the gpio core checks the
++ * pinctrl's device node for the "gpio-ranges" property.
++ * If it is present, it takes care of adding the pin ranges
++ * for the driver. In this case the driver can skip ahead.
++ *
++ * In order to remain compatible with older, existing DeviceTree
++ * files which don't set the "gpio-ranges" property or systems that
++ * utilize ACPI the driver has to call gpiochip_add_pin_range().
++ */
++ if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
++ ret = gpiochip_add_pin_range(&pctrl->chip,
++ dev_name(pctrl->dev), 0, 0, chip->ngpio);
++ if (ret) {
++ dev_err(pctrl->dev, "Failed to add pin range\n");
++ gpiochip_remove(&pctrl->chip);
++ return ret;
++ }
+ }
+
+ ret = gpiochip_irqchip_add(chip,
diff --git a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
index 1d08b9de74..ed44359e5f 100644
--- a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
+++ b/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
@@ -67,7 +67,7 @@ Changes:
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
-@@ -264,22 +274,22 @@
+@@ -265,22 +275,22 @@
};
acc0: clock-controller@b088000 {
@@ -94,7 +94,7 @@ Changes:
reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
};
-@@ -307,6 +317,12 @@
+@@ -308,6 +318,12 @@
regulator;
};
diff --git a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
index cd0f14eafd..33d744251c 100644
--- a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
+++ b/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
@@ -51,7 +51,7 @@ Changes:
};
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -538,5 +538,76 @@
+@@ -539,5 +539,76 @@
"legacy";
status = "disabled";
};
diff --git a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
index 112c921dbd..25f596eaff 100644
--- a/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
+++ b/target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
@@ -15,7 +15,7 @@ so the info might change.
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -539,6 +539,34 @@
+@@ -540,6 +540,34 @@
status = "disabled";
};
diff --git a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch
index 7ad9edbe99..eb3d9be013 100644
--- a/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ b/target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch
@@ -14,7 +14,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -567,6 +567,29 @@
+@@ -568,6 +568,29 @@
};
};
diff --git a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch
index 285cafd6d5..2c923625b4 100644
--- a/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ b/target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch
@@ -25,7 +25,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
};
cpus {
-@@ -590,6 +592,64 @@
+@@ -591,6 +593,64 @@
status = "disabled";
};