aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ar71xx/config-2.6.391
-rw-r--r--target/linux/ar71xx/config-3.21
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig11
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile1
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c12
-rw-r--r--target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c183
-rw-r--r--target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c10
-rw-r--r--target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c179
-rw-r--r--target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch17
9 files changed, 25 insertions, 390 deletions
diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39
index b8a91b50f3..4f51b1a2b9 100644
--- a/target/linux/ar71xx/config-2.6.39
+++ b/target/linux/ar71xx/config-2.6.39
@@ -25,7 +25,6 @@ CONFIG_AR71XX_MACH_AW_NR580=y
CONFIG_AR71XX_MACH_DB120=y
CONFIG_AR71XX_MACH_DIR_600_A1=y
CONFIG_AR71XX_MACH_DIR_615_C1=y
-CONFIG_AR71XX_MACH_DIR_615_E4=y
CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_EAP7660D=y
CONFIG_AR71XX_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/config-3.2 b/target/linux/ar71xx/config-3.2
index c3bcc763ff..50fe18fd95 100644
--- a/target/linux/ar71xx/config-3.2
+++ b/target/linux/ar71xx/config-3.2
@@ -34,7 +34,6 @@ CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DIR_600_A1=y
CONFIG_ATH79_MACH_DIR_615_C1=y
-CONFIG_ATH79_MACH_DIR_615_E4=y
CONFIG_ATH79_MACH_DIR_825_B1=y
CONFIG_ATH79_MACH_EAP7660D=y
CONFIG_ATH79_MACH_HORNET_UB=y
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
index 14982b1953..02d88c876f 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig
@@ -87,7 +87,7 @@ config AR71XX_MACH_DB120
select AR71XX_DEV_USB
config AR71XX_MACH_DIR_600_A1
- bool "D-Link DIR-600 rev. A1 support"
+ bool "D-Link DIR-600 A1/DIR-615 E4 support"
select SOC_AR724X
select AR71XX_DEV_AP91_PCI if PCI
select AR71XX_DEV_M25P80
@@ -104,15 +104,6 @@ config AR71XX_MACH_DIR_615_C1
select AR71XX_DEV_LEDS_GPIO
select AR71XX_NVRAM
-config AR71XX_MACH_DIR_615_E4
- bool "D-Link DIR-615 rev. E4 support"
- select SOC_AR724X
- select AR71XX_DEV_AP91_PCI if PCI
- select AR71XX_DEV_M25P80
- select AR71XX_DEV_GPIO_BUTTONS
- select AR71XX_DEV_LEDS_GPIO
- select AR71XX_NVRAM
-
config AR71XX_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
index 546ff34cc3..22e32e5acc 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o
obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o
obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o
-obj-$(CONFIG_AR71XX_MACH_DIR_615_E4) += mach-dir-615-e4.o
obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o
obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c
index 211985ed04..3b39b0653c 100644
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c
+++ b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c
@@ -1,7 +1,8 @@
/*
* D-Link DIR-600 rev. A1 board support
*
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -184,3 +185,12 @@ static void __init dir_600_a1_setup(void)
MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
dir_600_a1_setup);
+
+static void __init dir_615_e4_setup(void)
+{
+ dir_600_a1_setup();
+ ap91_pci_setup_wmac_led_pin(1);
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c b/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
deleted file mode 100644
index 3f26b5ac3d..0000000000
--- a/target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-dir-615-e4.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * D-Link DIR-615 rev. E4 board support
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-m25p80.h"
-#include "dev-ap91-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "nvram.h"
-
-#define DIR_615_E4_GPIO_LED_WPS 0
-#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
-#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
-#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
-#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
-#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
-#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
-#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
-#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
-
-#define DIR_615_E4_GPIO_BTN_RESET 8
-#define DIR_615_E4_GPIO_BTN_WPS 12
-
-#define DIR_615_E4_KEYS_POLL_INTERVAL 20
-#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
-
-#define DIR_615_E4_NVRAM_ADDR 0x1f030000
-#define DIR_615_E4_NVRAM_SIZE 0x10000
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition dir_615_e4_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "nvram",
- .offset = 0x030000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x040000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2c0000,
- }, {
- .name = "mac",
- .offset = 0x3e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x3a0000,
- }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data dir_615_e4_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = dir_615_e4_partitions,
- .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
-#endif
-};
-
-
-static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
- }, {
- .name = "d-link:amber:power",
- .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
- }, {
- .name = "d-link:green:lan1",
- .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan2",
- .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan3",
- .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan4",
- .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615_E4_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_E4_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_E4_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_615_e4_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac_buff[6];
- u8 *mac = NULL;
-
- if (nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
- "lan_mac=", mac_buff) == 0) {
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac_buff, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac_buff, 1);
- mac = mac_buff;
- }
-
- ar71xx_add_device_m25p80(&dir_615_e4_flash_data);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
- dir_615_e4_leds_gpio);
-
- ar71xx_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615_e4_gpio_keys),
- dir_615_e4_gpio_keys);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
-
- ar71xx_add_device_mdio(0, 0x0);
-
- /* LAN ports */
- ar71xx_add_device_eth(1);
-
- /* WAN port */
- ar71xx_add_device_eth(0);
-
- ap91_pci_setup_wmac_led_pin(1);
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(AR71XX_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
- dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c
index 6c50832029..931a7292e2 100644
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c
+++ b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-600-a1.c
@@ -2,6 +2,7 @@
* D-Link DIR-600 rev. A1 board support
*
* Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -182,3 +183,12 @@ static void __init dir_600_a1_setup(void)
MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
dir_600_a1_setup);
+
+static void __init dir_615_e4_setup(void)
+{
+ dir_600_a1_setup();
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c b/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
deleted file mode 100644
index b000a9cc2f..0000000000
--- a/target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-dir-615-e4.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * D-Link DIR-615 rev. E4 board support
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_615_E4_GPIO_LED_WPS 0
-#define DIR_615_E4_GPIO_LED_POWER_AMBER 1
-#define DIR_615_E4_GPIO_LED_POWER_GREEN 6
-#define DIR_615_E4_GPIO_LED_WAN_AMBER 7
-#define DIR_615_E4_GPIO_LED_WAN_GREEN 17
-#define DIR_615_E4_GPIO_LED_LAN1_GREEN 13
-#define DIR_615_E4_GPIO_LED_LAN2_GREEN 14
-#define DIR_615_E4_GPIO_LED_LAN3_GREEN 15
-#define DIR_615_E4_GPIO_LED_LAN4_GREEN 16
-
-#define DIR_615_E4_GPIO_BTN_RESET 8
-#define DIR_615_E4_GPIO_BTN_WPS 12
-
-#define DIR_615_E4_KEYS_POLL_INTERVAL 20
-#define DIR_615_E4_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_E4_KEYS_POLL_INTERVAL)
-
-#define DIR_615_E4_NVRAM_ADDR 0x1f030000
-#define DIR_615_E4_NVRAM_SIZE 0x10000
-
-static struct mtd_partition dir_615_e4_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "nvram",
- .offset = 0x030000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x040000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2c0000,
- }, {
- .name = "mac",
- .offset = 0x3e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x3a0000,
- }
-};
-
-static struct flash_platform_data dir_615_e4_flash_data = {
- .parts = dir_615_e4_partitions,
- .nr_parts = ARRAY_SIZE(dir_615_e4_partitions),
-};
-
-
-static struct gpio_led dir_615_e4_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_615_E4_GPIO_LED_POWER_GREEN,
- }, {
- .name = "d-link:amber:power",
- .gpio = DIR_615_E4_GPIO_LED_POWER_AMBER,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615_E4_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_615_E4_GPIO_LED_WAN_AMBER,
- }, {
- .name = "d-link:green:lan1",
- .gpio = DIR_615_E4_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan2",
- .gpio = DIR_615_E4_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan3",
- .gpio = DIR_615_E4_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan4",
- .gpio = DIR_615_E4_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615_E4_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_615_e4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_E4_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615_E4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_E4_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_615_e4_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(DIR_615_E4_NVRAM_ADDR);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac_buff[6];
- u8 *mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(nvram, DIR_615_E4_NVRAM_SIZE,
- "lan_mac=", mac_buff) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
- mac = mac_buff;
- }
-
- ath79_register_m25p80(&dir_615_e4_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_e4_leds_gpio),
- dir_615_e4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_615_E4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615_e4_gpio_keys),
- dir_615_e4_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
- dir_615_e4_setup);
diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index e6542a1741..048c7632fc 100644
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -188,7 +188,7 @@
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -54,6 +137,379 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
@@ -278,7 +278,7 @@
+ select MYLOADER
+
+config ATH79_MACH_DIR_600_A1
-+ bool "D-Link DIR-600 rev. A1 support"
++ bool "D-Link DIR-600 A1/DIR-615 E4 support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
@@ -297,16 +297,6 @@
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
-+config ATH79_MACH_DIR_615_E4
-+ bool "D-Link DIR-615 rev. E4 support"
-+ select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
-+ select ATH79_DEV_GPIO_BUTTONS
-+ select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_M25P80
-+ select ATH79_NVRAM
-+
+config ATH79_MACH_DIR_825_B1
+ bool "D-Link DIR-825 rev. B1 board support"
+ select SOC_AR71XX
@@ -630,7 +620,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,57 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
@@ -646,7 +636,6 @@
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
-+obj-$(CONFIG_ATH79_MACH_DIR_615_E4) += mach-dir-615-e4.o
+obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
+obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
+obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o