aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--package/madwifi/Makefile3
-rw-r--r--target/linux/storm/Makefile28
-rw-r--r--target/linux/storm/config-default358
-rw-r--r--target/linux/storm/image/Makefile41
-rw-r--r--target/linux/storm/patches/1001-arch.patch9010
-rw-r--r--target/linux/storm/patches/1002-gmac.patch18584
-rw-r--r--target/linux/storm/patches/1003-gmac_one_phy.patch13
-rw-r--r--target/linux/storm/patches/1004-gmac-enable-napi.patch83
-rw-r--r--target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch250
-rw-r--r--target/linux/storm/patches/1006-gmac-napi-tx.patch2098
-rw-r--r--target/linux/storm/patches/1020-mtd.patch4981
-rw-r--r--target/linux/storm/patches/1021-serial.patch2825
-rw-r--r--target/linux/storm/patches/1100-gpio.patch390
-rw-r--r--toolchain/Config.in1
-rw-r--r--toolchain/uClibc/config/arm.storm210
15 files changed, 38875 insertions, 0 deletions
diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index d502e33f59..697f2b68a5 100644
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -48,6 +48,9 @@ endif
ifeq ($(ARCH),powerpc)
HAL_TARGET:=powerpc-be-elf
endif
+ifeq ($(BOARD),storm)
+ HAL_TARGET:=armv4-le-elf
+endif
ifneq ($(CONFIG_TARGET_atheros),)
BUS:=AHB
diff --git a/target/linux/storm/Makefile b/target/linux/storm/Makefile
new file mode 100644
index 0000000000..c0d0023cc1
--- /dev/null
+++ b/target/linux/storm/Makefile
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=arm
+BOARD:=storm
+BOARDNAME:=Storm SL3512
+FEATURES:=squashfs pci broken
+
+LINUX_VERSION:=2.6.23.16
+
+include $(INCLUDE_DIR)/target.mk
+
+define Target/Description
+ Build images for boards based on the Storm Semiconductor SL3512, eg. Wiligear WBD-111
+endef
+
+define Kernel/Configure
+ $(call Kernel/Configure/Default)
+ $(SED) 's,.*CONFIG_AEABI.*,$(if $(CONFIG_EABI_SUPPORT),CONFIG_AEABI=y,# CONFIG_AEABI is not set),' $(LINUX_DIR)/.config
+ $(if $(CONFIG_EABI_SUPPORT),echo '# CONFIG_OABI_COMPAT is not set' >> $(LINUX_DIR)/.config)
+endef
+
+$(eval $(call BuildTarget))
diff --git a/target/linux/storm/config-default b/target/linux/storm/config-default
new file mode 100644
index 0000000000..043d5fe750
--- /dev/null
+++ b/target/linux/storm/config-default
@@ -0,0 +1,358 @@
+# CONFIG_AEABI is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+CONFIG_ARCH_SL2312=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARM=y
+# CONFIG_ARPD is not set
+# CONFIG_ARTHUR is not set
+# CONFIG_ATM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BONDING is not set
+CONFIG_BOUNCE=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BT is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CIFS is not set
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttySL0,19200 init=/etc/preinit mem=32M loglevel=8"
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_CPU_32=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_FA=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FA=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_FA526=y
+CONFIG_CPU_FA_BTB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_TLB_FA=y
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRYPTO is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_ELF_CORE=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_EPOLL is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FUTEX is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_GEMINI_GPIO_DEV=y
+# CONFIG_GEMINI_IPI is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_GENERIC_GPIO is not set
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_IFB is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IMQ is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IPSEC_NAT_TRAVERSAL is not set
+# CONFIG_IPV6 is not set
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_NF_ARPTABLES is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_IPP2P is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_TIME is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_SET is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_IMQ is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_ROUTE is not set
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ISDN is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JFFS2_RTIME is not set
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KMOD=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINI_FO is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
+# CONFIG_MTD_ROOTFS_SPLIT is not set
+# CONFIG_MTD_SERIAL is not set
+CONFIG_MTD_SL2312_CFI=y
+# CONFIG_MTD_SL2312_SERIAL_ATMEL is not set
+# CONFIG_MTD_SL2312_SERIAL_ST is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PORTSCAN is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_CHAOS is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DELUDE is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TARPIT is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ESFQ is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NLS is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NVRAM is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_PACKET=m
+# CONFIG_PARTITION_ADVANCED is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PPP is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RTC_LIB=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_SL2312=y
+CONFIG_SERIAL_SL2312_CONSOLE=y
+# CONFIG_SHMEM is not set
+# CONFIG_SL2312_LPC is not set
+# CONFIG_SL2312_SHARE_PIN is not set
+# CONFIG_SL2312_USB is not set
+CONFIG_SL3516_ASIC=y
+# CONFIG_SMC91X is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOUND is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_STANDALONE is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSVIPC is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_TINY_SHMEM=y
+# CONFIG_TUN is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UID16=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USER_NS is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_WLAN_80211 is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XIP_KERNEL is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/storm/image/Makefile b/target/linux/storm/image/Makefile
new file mode 100644
index 0000000000..b061c6d0ef
--- /dev/null
+++ b/target/linux/storm/image/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/Prepare
+ cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
+endef
+
+define Image/BuildKernel
+ cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
+#
+# XXX - FIXME
+#
+# BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh
+endef
+
+define Image/Build
+ $(call Image/Build/$(1),$(1))
+endef
+
+define Image/Build/jffs2-64k
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=65536 conv=sync
+endef
+
+define Image/Build/jffs2-128k
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
+ $(call Image/Build/slug,$(1))
+endef
+
+define Image/Build/squashfs
+ $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+ dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=131072 conv=sync
+ $(call Image/Build/slug,$(1))
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/storm/patches/1001-arch.patch b/target/linux/storm/patches/1001-arch.patch
new file mode 100644
index 0000000000..8fb9d2101c
--- /dev/null
+++ b/target/linux/storm/patches/1001-arch.patch
@@ -0,0 +1,9010 @@
+Index: linux-2.6.23.16/arch/arm/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/Kconfig 2008-03-13 17:46:04.000791190 +0200
++++ linux-2.6.23.16/arch/arm/Kconfig 2008-03-13 17:48:24.508798285 +0200
+@@ -220,6 +220,9 @@
+ help
+ This enables support for the Cirrus EP93xx series of CPUs.
+
++config ARCH_SL2312
++ bool "SL2312"
++
+ config ARCH_FOOTBRIDGE
+ bool "FootBridge"
+ select FOOTBRIDGE
+@@ -414,6 +417,8 @@
+
+ source "arch/arm/mach-footbridge/Kconfig"
+
++source "arch/arm/mach-sl2312/Kconfig"
++
+ source "arch/arm/mach-integrator/Kconfig"
+
+ source "arch/arm/mach-iop32x/Kconfig"
+@@ -549,6 +554,16 @@
+ config PCI_SYSCALL
+ def_bool PCI
+
++config SL2312_LPC
++ bool "LPC Host Support"
++ depends on ARCH_SL2312
++ help
++
++config SL2312_LPC_IT8712
++ bool "IT8712 Support"
++ depends on ARCH_SL2312 && SL2312_LPC
++ help
++
+ # Select the host bridge type
+ config PCI_HOST_VIA82C505
+ bool
+@@ -988,6 +1003,10 @@
+ source "drivers/mtd/Kconfig"
+ endif
+
++if ARCH_SL2312
++source "drivers/telephony/Kconfig"
++endif
++
+ source "drivers/parport/Kconfig"
+
+ source "drivers/pnp/Kconfig"
+@@ -997,7 +1016,7 @@
+ if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
+ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+- || ARCH_IXP23XX
++ || ARCH_IXP23XX || ARCH_SL2312
+ source "drivers/ide/Kconfig"
+ endif
+
+Index: linux-2.6.23.16/arch/arm/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/Makefile 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/Makefile 2008-03-13 17:48:24.508798285 +0200
+@@ -72,6 +72,7 @@
+ tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
++tune-$(CONFIG_CPU_FA52X) :=-mtune=arm9tdmi
+ tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
+ tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
+ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+@@ -111,6 +112,7 @@
+ machine-$(CONFIG_ARCH_PXA) := pxa
+ machine-$(CONFIG_ARCH_L7200) := l7200
+ machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
++ machine-$(CONFIG_ARCH_SL2312) := sl2312
+ textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
+ machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+ machine-$(CONFIG_ARCH_IOP32X) := iop32x
+Index: linux-2.6.23.16/arch/arm/boot/compressed/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/boot/compressed/Makefile 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/boot/compressed/Makefile 2008-03-13 17:48:24.508798285 +0200
+@@ -19,6 +19,10 @@
+ OBJS += head-shark.o ofw-shark.o
+ endif
+
++ifeq ($(CONFIG_ARCH_SL2312),y)
++OBJS += head-sl2312.o
++endif
++
+ ifeq ($(CONFIG_ARCH_L7200),y)
+ OBJS += head-l7200.o
+ endif
+Index: linux-2.6.23.16/arch/arm/boot/compressed/head-sl2312.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/boot/compressed/head-sl2312.S 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,6 @@
++#include <asm/mach-types.h>
++#include <asm/arch/sl2312.h>
++
++ .section ".start", "ax"
++ mov r7, #MACH_TYPE_SL2312
++
+Index: linux-2.6.23.16/arch/arm/boot/compressed/head.S
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/boot/compressed/head.S 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/boot/compressed/head.S 2008-03-13 17:48:24.508798285 +0200
+@@ -57,6 +57,17 @@
+ mov \rb, #0x50000000
+ add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
+ .endm
++/*****************************************************
++ * for Storlink SoC
++ *****************************************************/
++#elif defined(CONFIG_ARCH_SL2312)
++ .macro loadsp, rb
++ mov \rb, #0x16000000
++ .endm
++ .macro writeb, rb
++ strb \rb, [r3, #0]
++ .endm
++/****************************************************/
+ #else
+ .macro loadsp, rb
+ addruart \rb
+@@ -116,7 +127,28 @@
+ .rept 8
+ mov r0, r0
+ .endr
+-
++/*****************************************************************************
++ * for Storlink Soc -- on chip UART
++ *****************************************************************************/
++#ifndef CONFIG_SERIAL_IT8712 // Jason test
++@ mov r3, #0x22000000
++ mov r3, #0x42000000
++ mov r11, #0x80
++ strb r11, [r3, #0xc]
++ mov r11, #0x0
++ strb r11, [r3, #0x4]
++#ifndef CONFIG_SL3516_ASIC
++ mov r11, #0x9C /*0x9c->19200 0x4E->38400 0x34->57600 */
++#else
++ mov r11, #0x9C /* 0x61 for 30MHz on GeminiA chip*/
++#endif
++ strb r11, [r3, #0x0]
++ mov r11, #0x03
++ strb r11, [r3, #0xc]
++ mov r11, #0xFB
++ strb r11, [r3, #0x18]
++#endif
++/*****************************************************************************/
+ b 1f
+ .word 0x016f2818 @ Magic numbers to help the loader
+ .word start @ absolute load/run zImage address
+@@ -458,6 +490,39 @@
+ mcr p15, 0, r0, c7, c5, 4 @ ISB
+ mov pc, r12
+
++/*****************************************************************************
++ * for Storlink Soc -- CPU cache
++ *****************************************************************************/
++__fa526_cache_on:
++ mov r12, lr
++ bl __setup_mmu
++ mov r0, #0
++ mcr p15, 0, r0, c7, c6, 0 @ Invalidate D cache
++ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache
++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
++ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
++ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
++ mov r0, #-1
++ mcr p15, 0, r0, c3, c0, 0 @ load domain access register
++ mrc p15, 0, r0, c1, c0, 0
++ mov r0, r0
++ mov r0, r0
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++ orr r0, r0, #0x0004 @ .... .... .... .1..
++#endif
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ orr r0, r0, #0x1000 @ ...1 .... .... ....
++#endif
++
++#ifndef DEBUG
++ orr r0, r0, #0x0039 @ Write buffer, mmu
++#endif
++ mcr p15, 0, r0, c1, c0
++ mov r0, r0
++ mov r0, r0
++ mov pc, r12
++/********************************************************************************/
++
+ __arm6_mmu_cache_on:
+ mov r12, lr
+ bl __setup_mmu
+@@ -625,6 +690,16 @@
+
+ @ These match on the architecture ID
+
++/*****************************************************************************
++ * for Storlink Soc -- CPU architecture ID
++ *****************************************************************************/
++ .word 0x66015261 @ FA526
++ .word 0xff01fff1
++ b __fa526_cache_on
++ b __fa526_cache_off
++ b __fa526_cache_flush
++/*****************************************************************************/
++
+ .word 0x00020000 @ ARMv4T
+ .word 0x000f0000
+ b __armv4_mmu_cache_on
+@@ -712,6 +787,23 @@
+ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
+ mov pc, r12
+
++/*****************************************************************************
++ * for Storlink Soc -- CPU cache
++ *****************************************************************************/
++__fa526_cache_off:
++ mrc p15, 0, r0, c1, c0
++ bic r0, r0, #0x000d
++ mov r1, #0
++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
++ mcr p15, 0, r1, c7, c10, 4 @ drain WB
++ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
++ mov r0, #0
++ mcr p15, 0, r0, c7, c5, 0 @ invalidate whole cache v4
++ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB v4
++ mov pc, lr
++/*****************************************************************************/
++
++
+ __arm6_mmu_cache_off:
+ mov r0, #0x00000030 @ ARM6 control reg.
+ b __armv3_mmu_cache_off
+@@ -759,6 +851,17 @@
+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
+ mov pc, lr
+
++/*****************************************************************************
++ * for Storlink Soc -- CPU cache
++ *****************************************************************************/
++__fa526_cache_flush:
++ mov r1, #0
++ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
++ mcr p15, 0, r1, c7, c5, 0 @ flush I cache
++ mcr p15, 0, r1, c7, c10, 4 @ drain WB
++ mov pc, lr
++/*****************************************************************************/
++
+
+ __armv6_mmu_cache_flush:
+ mov r1, #0
+Index: linux-2.6.23.16/arch/arm/boot/compressed/it8712.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/boot/compressed/it8712.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,25 @@
++
++#ifndef __IT8712_H__
++#define __IT8712_H__
++
++#include "asm/arch/sl2312.h"
++
++#define IT8712_IO_BASE SL2312_LPC_IO_BASE
++//#define IT8712_IO_BASE 0x27000000
++// Device LDN
++#define LDN_SERIAL1 0x01
++#define LDN_SERIAL2 0x02
++#define LDN_PARALLEL 0x03
++#define LDN_KEYBOARD 0x05
++#define LDN_MOUSE 0x06
++#define LDN_GPIO 0x07
++
++#define IT8712_UART1_PORT 0x3F8
++#define IT8712_UART2_PORT 0x2F8
++
++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5
++
++void LPCSetConfig(char LdnNumber, char Index, char data);
++char LPCGetConfig(char LdnNumber, char Index);
++
++#endif
+Index: linux-2.6.23.16/arch/arm/boot/compressed/misc.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/boot/compressed/misc.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/boot/compressed/misc.c 2008-03-13 17:48:24.508798285 +0200
+@@ -30,7 +30,7 @@
+ #include <asm/arch/uncompress.h>
+
+ #ifdef CONFIG_DEBUG_ICEDCC
+-
++#include "it8712.h"
+ #ifdef CONFIG_CPU_V6
+
+ static void icedcc_putc(int ch)
+@@ -69,6 +69,7 @@
+ #define flush() do { } while (0)
+ #endif
+
++#if 0
+ static void putstr(const char *ptr)
+ {
+ char c;
+@@ -81,11 +82,36 @@
+
+ flush();
+ }
++#endif
+
+ #endif
+
+ #define __ptr_t void *
+
++#ifdef CONFIG_SERIAL_IT8712
++unsigned int it8712_uart_base;
++#define UART_RX 0
++#define UART_TX 0
++#define UART_DLL 0
++#define UART_TRG 0
++#define UART_DLM 1
++#define UART_IER 1
++#define UART_FCTR 1
++#define UART_IIR 2
++#define UART_FCR 2
++#define UART_EFR 2
++#define UART_LCR 3
++#define UART_MCR 4
++#define UART_LSR 5
++#define UART_MSR 6
++#define UART_SCR 7
++#define UART_EMSR 7
++void LPCEnterMBPnP(void);
++void LPCExitMBPnP(void);
++int SearchIT8712(void);
++int InitLPCInterface(void);
++#endif
++
+ /*
+ * Optimised C version of memzero for the ARM.
+ */
+@@ -346,6 +372,9 @@
+ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
+ int arch_id)
+ {
++#ifdef CONFIG_SERIAL_IT8712
++ unsigned char *addr;
++#endif
+ output_data = (uch *)output_start; /* Points to kernel start */
+ free_mem_ptr = free_mem_ptr_p;
+ free_mem_ptr_end = free_mem_ptr_end_p;
+@@ -353,6 +382,33 @@
+
+ arch_decomp_setup();
+
++#ifdef CONFIG_SERIAL_IT8712
++
++ InitLPCInterface();
++ LPCSetConfig(0, 0x02, 0x01);
++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
++ it8712_uart_base = IT8712_IO_BASE;
++ it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
++
++ do {
++ addr = (unsigned char *)(it8712_uart_base + UART_LCR) ;
++ *addr = 0x80;
++ // Set Baud Rate
++ addr = (unsigned char *)(it8712_uart_base+UART_DLL);
++ *addr = 0x06 ;
++ addr = (unsigned char *)(it8712_uart_base+UART_DLM);
++ *addr = 0x00 ;
++
++ addr = (unsigned char *)(it8712_uart_base+UART_LCR); // LCR
++ *addr = 0x07 ;
++ addr = (unsigned char *)(it8712_uart_base+UART_MCR); // MCR
++ *addr = 0x08 ;
++ addr = (unsigned char *)(it8712_uart_base+UART_FCR); // FCR
++ *addr = 0x01 ;
++ } while(0);
++#endif
++
+ makecrc();
+ putstr("Uncompressing Linux...");
+ gunzip();
+@@ -374,4 +430,119 @@
+ return 0;
+ }
+ #endif
++
++#ifdef CONFIG_SERIAL_IT8712
++
++#define LPC_KEY_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e)
++#define LPC_DATA_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f)
++#define LPC_BUS_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 0)
++#define LPC_BUS_STATUS *( unsigned char*) (SL2312_LPC_HOST_BASE + 2)
++#define LPC_SERIAL_IRQ_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 4)
++
++char LPCGetConfig(char LdnNumber, char Index)
++{
++ char rtn;
++ unsigned char *addr ;
++
++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
++
++ addr = LPC_KEY_ADDR;
++ *addr = 0x07 ;
++
++ addr = LPC_DATA_ADDR;
++ *addr = LdnNumber ;
++
++ addr = LPC_KEY_ADDR;
++ *addr = Index ;
++
++ addr = LPC_DATA_ADDR ;
++ rtn = *addr ;
++
++ LPCExitMBPnP();
++ return rtn;
++
++}
++
++void LPCSetConfig(char LdnNumber, char Index, char data)
++{
++ unsigned char *addr;
++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
++ addr = LPC_KEY_ADDR;
++ *addr = 0x07;
++ addr = LPC_DATA_ADDR;
++ *addr = LdnNumber;
++ addr = LPC_KEY_ADDR;
++ *addr = Index;
++ addr = LPC_DATA_ADDR;
++ *addr = data;
++
++ LPCExitMBPnP();
++}
++
++//unsigned char key[4] ;
++void LPCEnterMBPnP(void)
++{
++ unsigned char *addr;
++ addr = LPC_KEY_ADDR;
++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
++
++ do {
++ *addr = key[0];
++ *addr = key[1];
++ *addr = key[2];
++ *addr = key[3];
++ }while(0);
++}
++
++void LPCExitMBPnP(void)
++{
++ unsigned char *addr;
++ addr = LPC_KEY_ADDR;
++ *addr = 0x02 ;
++
++ addr = LPC_DATA_ADDR;
++ *addr = 0x02 ;
++}
++
++int InitLPCInterface(void)
++{
++ int i;
++ LPC_BUS_CTRL = 0xc0;
++ LPC_SERIAL_IRQ_CTRL = 0xc0;
++
++ for(i=0;i<0x2000;i++) ;
++
++ LPC_SERIAL_IRQ_CTRL = 0x80;
++ if (!SearchIT8712()) ;
++// while(1);
++ return 0;
++}
++
++int SearchIT8712(void)
++{
++ unsigned char Id1, Id2;
++ unsigned short Id;
++ unsigned char *addr;
++
++ LPCEnterMBPnP();
++ addr = LPC_KEY_ADDR;
++ *addr = 0x20 ;
++ addr = LPC_DATA_ADDR;
++ Id1 = *addr ;
++
++ addr = LPC_KEY_ADDR;
++ *addr = 0x21 ;
++ addr = LPC_DATA_ADDR;
++ Id2 = *addr ;
++
++ Id = (Id1 << 8) | Id2;
++ LPCExitMBPnP();
++
++ if (Id == 0x8712)
++ return 1;
++ else
++ return 0;
++}
++
++#endif
+
+Index: linux-2.6.23.16/arch/arm/kernel/entry-armv.S
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/kernel/entry-armv.S 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/kernel/entry-armv.S 2008-03-13 17:48:24.508798285 +0200
+@@ -18,6 +18,8 @@
+ #include <asm/memory.h>
+ #include <asm/glue.h>
+ #include <asm/vfpmacros.h>
++#include <asm/arch/irqs.h>
++#include <asm/hardware.h>
+ #include <asm/arch/entry-macro.S>
+ #include <asm/thread_notify.h>
+
+Index: linux-2.6.23.16/arch/arm/kernel/irq.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/kernel/irq.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/kernel/irq.c 2008-03-13 17:48:24.508798285 +0200
+@@ -40,6 +40,8 @@
+ #include <asm/system.h>
+ #include <asm/mach/time.h>
+
++extern int fixup_irq(unsigned int irq);
++
+ /*
+ * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
+ */
+@@ -111,8 +113,11 @@
+ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+ {
+ struct pt_regs *old_regs = set_irq_regs(regs);
+- struct irq_desc *desc = irq_desc + irq;
++// struct irq_desc *desc = irq_desc + irq;
++ struct irq_desc *desc;
+
++ irq = fixup_irq(irq);
++ desc = irq_desc + irq;
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+Index: linux-2.6.23.16/arch/arm/kernel/process.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/kernel/process.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/kernel/process.c 2008-03-13 17:48:24.508798285 +0200
+@@ -117,7 +117,7 @@
+ void (*pm_idle)(void);
+ EXPORT_SYMBOL(pm_idle);
+
+-void (*pm_power_off)(void);
++//void (*pm_power_off)(void);
+ EXPORT_SYMBOL(pm_power_off);
+
+ void (*arm_pm_restart)(char str) = arm_machine_restart;
+@@ -188,13 +188,37 @@
+
+ void machine_halt(void)
+ {
++ unsigned int reg_v;
++
++ printk("arch_power_off\n");
++
++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
++ reg_v &= ~0x00000002;
++ reg_v |= 0x1;
++ mdelay(5);
++ // Power off
++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
++
+ }
+
+
+ void machine_power_off(void)
+ {
+- if (pm_power_off)
++ unsigned int reg_v;
++
++// if (pm_power_off)
++ if (&pm_power_off!=NULL)
+ pm_power_off();
++
++ printk("arch_power_off\n");
++
++ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
++ reg_v &= ~0x00000002;
++ reg_v |= 0x1;
++ mdelay(5);
++ // Power off
++ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
++
+ }
+
+ void machine_restart(char * __unused)
+Index: linux-2.6.23.16/arch/arm/kernel/time.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/kernel/time.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/kernel/time.c 2008-03-13 17:48:24.508798285 +0200
+@@ -502,8 +502,13 @@
+
+ device_initcall(timer_init_sysfs);
+
++extern unsigned int rtc_get_time_second(void);
++
+ void __init time_init(void)
+ {
++#ifdef CONFIG_SL2312_RTC
++ xtime.tv_sec = rtc_get_time_second() ;
++#endif
+ #ifndef CONFIG_GENERIC_TIME
+ if (system_timer->offset == NULL)
+ system_timer->offset = dummy_gettimeoffset;
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/Kconfig
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/Kconfig 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,33 @@
++
++menu "SL2312"
++
++config SL3516_ASIC
++ bool "SL3516 ASIC version"
++ depends on ARCH_SL2312
++ help
++ This option to select AISC or FPGA
++config PCI
++ bool "SL2312 PCI"
++ depends on ARCH_SL2312
++ help
++ This option to enable Storlink PCI controller
++
++config SL2312_LPC
++ bool "SL2312 LPC"
++ depends on ARCH_SL2312
++ help
++ This option to enable Low Pin Count controller
++
++config SL2312_USB
++ bool "SL2312 USB"
++ depends on ARCH_SL2312
++ help
++ This option to enable USB OTG host controller
++
++config GEMINI_IPI
++ bool "Gemini IPI test"
++ depends on ARCH_SL2312
++ help
++ Enable this option to test dual cpu Inter-Processor-Interrupt
++endmenu
++
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/Makefile
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/Makefile 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,16 @@
++#
++# Makefile for the linux kernel.
++#
++
++# Object file lists.
++
++obj-y := arch.o irq.o mm.o time.o sl3516_device.o
++obj-m :=
++obj-n :=
++
++
++obj-$(CONFIG_PCI) += pci.o
++obj-$(CONFIG_SL2312_LPC) += lpc.o
++obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o
++obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o
++obj-$(CONFIG_GEMINI_IPI) += gemini_ipi.o
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/Makefile.boot
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/Makefile.boot 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,5 @@
++ zreladdr-y := 0x00008000
++params_phys-y := 0x00508100
++#params_phys-y := 0x00008100
++initrd_phys-y := 0x00800000
++
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/arch.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/arch.c 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,72 @@
++/*
++ * linux/arch/arm/mach-epxa10db/arch.c
++ *
++ * Copyright (C) 2000 Deep Blue Solutions Ltd
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/types.h>
++#include <linux/init.h>
++
++#include <asm/hardware.h>
++#include <asm/setup.h>
++#include <asm/mach-types.h>
++#include <asm/mach/time.h>
++#include <asm/mach/arch.h>
++
++extern void sl2312_map_io(void);
++extern void sl2312_init_irq(void);
++extern unsigned long sl2312_gettimeoffset (void);
++extern void __init sl2312_time_init(void);
++
++static struct sys_timer sl2312_timer = {
++ .init = sl2312_time_init,
++ .offset = sl2312_gettimeoffset,
++};
++
++static void __init
++sl2312_fixup(struct machine_desc *desc, struct tag *tags,
++ char **cmdline, struct meminfo *mi)
++{
++ mi->nr_banks = 1;
++ mi->bank[0].start = 0;
++#ifdef CONFIG_GEMINI_IPI
++ mi->bank[0].size = (64*1024*1024); // 128M
++#else
++ mi->bank[0].size = (128*1024*1024); // 128M
++#endif
++ mi->bank[0].node = 0;
++}
++
++/* MACHINE_START(SL2312, "GeminiA")
++ MAINTAINER("Storlink Semi")
++ BOOT_MEM(0x00000000, 0x90000000, 0xf0000000)
++ FIXUP(sl2312_fixup)
++ MAPIO(sl2312_map_io)
++ INITIRQ(sl2312_init_irq)
++ .timer = &sl2312_timer,
++MACHINE_END */
++
++MACHINE_START(SL2312, "GeminiA")
++ /* .phys_ram = 0x00000000, */
++ .phys_io = 0x7fffc000,
++ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
++ .boot_params = 0x100,
++ .fixup = sl2312_fixup,
++ .map_io = sl2312_map_io,
++ .init_irq = sl2312_init_irq,
++ .timer = &sl2312_timer,
++MACHINE_END
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/gemini_ipi.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/gemini_ipi.c 2008-03-15 16:53:01.339687322 +0200
+@@ -0,0 +1,593 @@
++/*
++ * FILE NAME sl_cir.c
++ *
++ * BRIEF MODULE DESCRIPTION
++ * IPI Driver for CPU1.
++ *
++ * Author: StorLink, Corp.
++ * Jason Lee
++ *
++ * Copyright 2002~2006 StorLink, Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMit8712D TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMit8712D TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, writ8712 to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/init.h>
++#include <linux/pagemap.h>
++#include <asm/uaccess.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/delay.h>
++#include <linux/fs.h>
++#include <linux/interrupt.h>
++#include <asm/io.h>
++#include <asm/delay.h>
++#include <linux/signal.h>
++#include <asm/arch/sl2312.h>
++#include <asm/arch/int_ctrl.h>
++#include <asm/arch/ipi.h>
++#include <linux/dma-mapping.h>
++
++
++#include <linux/mm.h>
++
++#include <linux/bootmem.h>
++
++#include <asm/hardware.h>
++#include <asm/page.h>
++#include <asm/setup.h>
++#include <asm/pgtable.h>
++#include <asm/pgalloc.h>
++
++#include <asm/mach/map.h>
++
++
++static int sl_ipi_debug = 1 ;
++#define DEB(x) if(sl_ipi_debug>=1) x
++
++#define SRAM_PTR IO_ADDRESS(SL2312_SRAM_BASE)
++volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR;
++volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20);
++
++unsigned int jscale_status=0;
++
++#define JSCALE_WAIT 0
++#define XXXXXX_WAIT 1
++#define MAX_WAIT_Q 8
++wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q];
++
++#define DRAMCTL_DMA_CTL 0X20
++#define DRAMCTL_DMA_SA 0X24
++#define DRAMCTL_DMA_DA 0X28
++#define DRAMCTL_DMA_CNT 0X2C
++#define MEMCPY_UNIT 0x40000
++int hw_memcpy(const void *to, const void *from, unsigned int bytes)
++{
++ unsigned int reg_a,reg_d;
++ int count = bytes,i=0;
++
++ consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE);
++
++ DEB(printk("hwmemcpy:count %d\n",count));
++ while(count>0){
++ // SA
++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA;
++ reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT;
++ DEB(printk("hwmemcpy:from 0x%08x\n",reg_d));
++ writel(reg_d,reg_a);
++ // DA
++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA;
++ reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT;
++ writel(reg_d,reg_a);
++ DEB(printk("hwmemcpy:to 0x%08x\n",reg_d));
++ // byte count
++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT;
++ reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count;
++ writel(reg_d,reg_a);
++ // start DMA
++ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL;
++ writel(0x80000001,reg_a);
++
++ do{
++ cond_resched();
++// msleep(4);
++ reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL);
++ }while(reg_d&0x1);
++
++ count -= MEMCPY_UNIT;
++ i++;
++ }
++
++ return bytes;
++}
++
++static irqreturn_t ipi_interrupt()
++{
++ unsigned int id=getcpuid(),tmp;
++
++ //dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000);
++
++
++ // Clear Interrupt
++ if(id==CPU0) {
++ tmp = readl(CPU1_STATUS);
++ tmp &= ~CPU_IPI_BIT_MASK;
++ writel(tmp,CPU1_STATUS);
++ }
++ else{
++ tmp = readl(CPU0_STATUS);
++ tmp &= ~CPU_IPI_BIT_MASK;
++ writel(tmp,CPU0_STATUS);
++ }
++
++ //
++ DEB(printk("ipi interrupt:0x%x\n",rsp->status));
++ switch(rsp->status){
++ case JSCALE_STATUS_OK:
++
++ break;
++ case JSCALE_UNKNOWN_MSG_TYPE:
++
++ break;
++ case JSCALE_FAILED_FILE_SIZE:
++
++ break;
++ case JSCALE_FAILED_MALLOC:
++
++ break;
++ case JSCALE_FAILED_FORMAT:
++
++ break;
++ case JSCALE_DECODE_ERROR:
++
++ break;
++
++ }
++ jscale_status = rsp->status;
++// wake_up(&gemini_ipi_wait[JSCALE_WAIT]);
++
++ return IRQ_HANDLED;
++}
++
++static int gemini_ipi_open(struct inode *inode, struct file *file)
++{
++ DEB(printk("ipi open\n"));
++ return 0;
++}
++
++
++static int gemini_ipi_release(struct inode *inode, struct file *file)
++{
++ DEB(printk("ipi release\n"));
++ return 0;
++}
++
++
++static int gemini_ipi_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ JSCALE_RSP_T tmp;
++
++ switch(cmd) {
++ case GEMINI_IPI_JSCALE_REQ:
++ DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality));
++ if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T)))
++ return -EFAULT;
++ req->hdr.type = IPC_JSCALE_REQ_MSG;
++ req->hdr.length = sizeof(JSCALE_REQ_T);
++ req->input_location = CPU_1_DATA_OFFSET;
++ req->output_location = CPU_1_DATA_OFFSET;
++ break;
++ case GEMINI_IPI_JSCALE_STAT:
++ DEB(printk("ipi:ioctl jscale stat \n"));
++ if(jscale_status==JSCALE_BUSY){ // not yet
++ tmp.status = JSCALE_BUSY;
++ if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T)))
++ return -EFAULT;
++ }
++ else{ // finish or error
++ if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T)))
++ return -EFAULT;
++ }
++ break;
++ default:
++ printk("IPI: Error IOCTL number\n");
++ return -ENOIOCTLCMD;
++ }
++
++ return 0;
++}
++
++#define SRAM_SIZE 0x2000
++static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos)
++{
++ int i=0,tmp=0,j;
++ const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
++ DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count));
++ memcpy(ptr,buf,count);
++ consistent_sync(ptr,count, DMA_TO_DEVICE);
++ //hw_memcpy(ptr,&buf,count);
++
++/* if(count>SRAM_SIZE){
++ for(i=0;i<(count/SRAM_SIZE);i++)
++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE);
++ if(count%SRAM_SIZE)
++ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE);
++ }
++ else
++ raid_memcpy(ptr,buf,count);
++*/
++
++/* for(i=0;i<count;i++){
++ if(buf[i]!=ptr[i])
++ printk("ipi error:offset %d valud %x[should %x]\n",i,ptr[i],buf[i]);
++ }
++
++ printk("===========input buf===============\n");
++ for(i=0;i<64;i+=16){
++ for(j=0;j<16;j++)
++ printk("%02x ",buf[i+j]);
++ printk("\n");
++ cond_resched();
++ }
++ printk("===========output buf==============\n");
++ for(i=0;i<64;i+=16){
++ for(j=0;j<16;j++)
++ printk("%02x ",ptr[i+j]);
++ printk("\n");
++ cond_resched();
++ }
++*/
++ // send irq for CPU1
++ tmp |= CPU_IPI_BIT_MASK;
++ writel(tmp,CPU0_STATUS);
++ jscale_status = JSCALE_BUSY;
++
++ return count;
++}
++
++static ssize_t gemini_ipi_read(struct file * file_p, char *buf, size_t length, loff_t * ppos)
++{
++ int i=0;
++ const char *ptr=(unsigned int )__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
++
++ consistent_sync(ptr,length, DMA_FROM_DEVICE);
++ memcpy(buf,ptr,length);
++ DEB(printk("ipi:read 0x%x to 0x%x length:%d\n",ptr,buf,length));
++
++ //consistent_sync((unsigned int *)ptr,0x2000, DMA_FROM_DEVICE); // invalid
++ //hw_memcpy(buf,ptr,length);
++
++ // need encoded file size ********
++/* if(count>SRAM_SIZE){
++ for(i=0;i<(count/SRAM_SIZE);i++)
++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE);
++ if(count%0xFFFF)
++ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE);
++ }
++ else
++ raid_memcpy(buf,p_mbox->message,length);
++*/
++ return length;
++}
++
++void do_mapping_read(struct address_space *mapping,
++ struct file_ra_state *_ra,
++ struct file *filp,
++ loff_t *ppos,
++ read_descriptor_t *desc,
++ read_actor_t actor)
++{
++ struct inode *inode = mapping->host;
++ unsigned long index;
++ unsigned long end_index;
++ unsigned long offset;
++ unsigned long last_index;
++ unsigned long next_index;
++ unsigned long prev_index;
++ loff_t isize;
++ struct page *cached_page;
++ int error;
++ struct file_ra_state ra = *_ra;
++
++ cached_page = NULL;
++ index = *ppos >> PAGE_CACHE_SHIFT;
++ next_index = index;
++ prev_index = ra.prev_page;
++ last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
++ offset = *ppos & ~PAGE_CACHE_MASK;
++
++ isize = i_size_read(inode);
++ if (!isize)
++ goto out;
++
++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
++ for (;;) {
++ struct page *page;
++ unsigned long nr, ret;
++
++ /* nr is the maximum number of bytes to copy from this page */
++ nr = PAGE_CACHE_SIZE;
++ if (index >= end_index) {
++ if (index > end_index)
++ goto out;
++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
++ if (nr <= offset) {
++ goto out;
++ }
++ }
++ nr = nr - offset;
++
++ cond_resched();
++ if (index == next_index)
++ next_index = page_cache_readahead(mapping, &ra, filp,
++ index, last_index - index);
++
++find_page:
++ page = find_get_page(mapping, index);
++ if (unlikely(page == NULL)) {
++ handle_ra_miss(mapping, &ra, index);
++ goto no_cached_page;
++ }
++ if (!PageUptodate(page))
++ goto page_not_up_to_date;
++page_ok:
++
++ /* If users can be writing to this page using arbitrary
++ * virtual addresses, take care about potential aliasing
++ * before reading the page on the kernel side.
++ */
++ if (mapping_writably_mapped(mapping))
++ flush_dcache_page(page);
++
++ /*
++ * When (part of) the same page is read multiple times
++ * in succession, only mark it as accessed the first time.
++ */
++ if (prev_index != index)
++ mark_page_accessed(page);
++ prev_index = index;
++
++ /*
++ * Ok, we have the page, and it's up-to-date, so
++ * now we can copy it to user space...
++ *
++ * The actor routine returns how many bytes were actually used..
++ * NOTE! This may not be the same as how much of a user buffer
++ * we filled up (we may be padding etc), so we can only update
++ * "pos" here (the actor routine has to update the user buffer
++ * pointers and the remaining count).
++ */
++ ret = actor(desc, page, offset, nr);
++ offset += ret;
++ index += offset >> PAGE_CACHE_SHIFT;
++ offset &= ~PAGE_CACHE_MASK;
++
++ page_cache_release(page);
++ if (ret == nr && desc->count)
++ continue;
++ goto out;
++
++page_not_up_to_date:
++ /* Get exclusive access to the page ... */
++ lock_page(page);
++
++ /* Did it get unhashed before we got the lock? */
++ if (!page->mapping) {
++ unlock_page(page);
++ page_cache_release(page);
++ continue;
++ }
++
++ /* Did somebody else fill it already? */
++ if (PageUptodate(page)) {
++ unlock_page(page);
++ goto page_ok;
++ }
++
++readpage:
++ /* Start the actual read. The read will unlock the page. */
++ error = mapping->a_ops->readpage(filp, page);
++
++ if (unlikely(error))
++ goto readpage_error;
++
++ if (!PageUptodate(page)) {
++ lock_page(page);
++ if (!PageUptodate(page)) {
++ if (page->mapping == NULL) {
++ /*
++ * invalidate_inode_pages got it
++ */
++ unlock_page(page);
++ page_cache_release(page);
++ goto find_page;
++ }
++ unlock_page(page);
++ error = -EIO;
++ goto readpage_error;
++ }
++ unlock_page(page);
++ }
++
++ /*
++ * i_size must be checked after we have done ->readpage.
++ *
++ * Checking i_size after the readpage allows us to calculate
++ * the correct value for "nr", which means the zero-filled
++ * part of the page is not copied back to userspace (unless
++ * another truncate extends the file - this is desired though).
++ */
++ isize = i_size_read(inode);
++ end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
++ if (unlikely(!isize || index > end_index)) {
++ page_cache_release(page);
++ goto out;
++ }
++
++ /* nr is the maximum number of bytes to copy from this page */
++ nr = PAGE_CACHE_SIZE;
++ if (index == end_index) {
++ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
++ if (nr <= offset) {
++ page_cache_release(page);
++ goto out;
++ }
++ }
++ nr = nr - offset;
++ goto page_ok;
++
++readpage_error:
++ /* UHHUH! A synchronous read error occurred. Report it */
++ desc->error = error;
++ page_cache_release(page);
++ goto out;
++
++no_cached_page:
++ /*
++ * Ok, it wasn't cached, so we need to create a new
++ * page..
++ */
++ if (!cached_page) {
++ cached_page = page_cache_alloc_cold(mapping);
++ if (!cached_page) {
++ desc->error = -ENOMEM;
++ goto out;
++ }
++ }
++ error = add_to_page_cache_lru(cached_page, mapping,
++ index, GFP_KERNEL);
++ if (error) {
++ if (error == -EEXIST)
++ goto find_page;
++ desc->error = error;
++ goto out;
++ }
++ page = cached_page;
++ cached_page = NULL;
++ goto readpage;
++ }
++
++out:
++ *_ra = ra;
++
++ *ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;
++ if (cached_page)
++ page_cache_release(cached_page);
++ if (filp)
++ file_accessed(filp);
++}
++
++int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size)
++{
++ ssize_t written;
++ unsigned long count = desc->count;
++ struct file *file = desc->arg.data;
++ unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written;
++ void *ptr_from;
++
++ if (size > count)
++ size = count;
++
++ ptr_from = page_address(page)+offset;
++ written = memcpy(ptr_to,ptr_from,size);
++
++ if (written < 0) {
++ desc->error = written;
++ written = 0;
++ }
++ desc->count = count - written;
++ desc->written += written;
++ return written;
++}
++
++ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos,
++ size_t count, read_actor_t actor, void *TARGET)
++{
++ read_descriptor_t desc;
++
++ if (!count)
++ return 0;
++
++ desc.written = 0;
++ desc.count = count;
++ desc.arg.data = TARGET;
++ desc.error = 0;
++
++ do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor);
++
++ if (desc.written)
++ return desc.written;
++ return desc.error;
++}
++static struct file_operations gemini_ipi_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = gemini_ipi_ioctl,
++ .open = gemini_ipi_open,
++ .release= gemini_ipi_release,
++ .write = gemini_ipi_write,
++ .read = gemini_ipi_read,
++ .sendfile = gemini_ipi_sendfile,
++};
++
++#ifndef STORLINK_IPI
++#define STORLINK_IPI 242 // Documents/devices.txt suggest to use 240~255 for local driver!!
++#endif
++
++static struct miscdevice gemini_ipi_miscdev =
++{
++ STORLINK_IPI,
++ "slave_ipc",
++ &gemini_ipi_fops
++};
++
++int __init sl_ipi_init(void)
++{
++
++ printk("Gemini IPI Driver Initialization...\n");
++ printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE);
++ printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20);
++ printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
++
++ misc_register(&gemini_ipi_miscdev);
++
++ if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL))
++ printk("Error: Register IRQ for Storlink IPI failed\n");
++
++ return 0;
++}
++
++void __exit sl_ipi_exit(void)
++{
++
++}
++
++module_init(sl_ipi_init);
++module_exit(sl_ipi_exit);
++
++MODULE_AUTHOR("Jason Lee <jason@storlink.com.tw>");
++MODULE_DESCRIPTION("Storlink IPI driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/hw_xor.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/hw_xor.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,573 @@
++/*
++* linux/include/asm-arm/xor.h
++*
++* Copyright (C) 2001 Storlink Semi.
++* Jason Lee <jason@storlink.com.tw>
++*
++*/
++#include <asm/arch/sl2312.h>
++#include <asm/io.h>
++//#include <linux/compatmac.h>
++
++#undef BIG_ENDIAN
++#define CPU 0
++#define DMA 1
++
++#define DESC_NO 8
++#define TX_DESC_NUM DESC_NO
++#define RX_DESC_NUM DESC_NO
++
++#define RAID_BASE_ADDR IO_ADDRESS(SL2312_RAID_BASE)
++
++#define SRAM_PAR_0k 0
++#define SRAM_PAR_4k 1
++#define SRAM_PAR_8k 2
++#define SRAM_PAR_16k 3
++#define SRAM_PAR_SIZE SRAM_PAR_8k
++
++#define RUNNING 0x1
++#define COMPLETE 0x2
++#define ERROR 0x4
++
++#define CMD_XOR 0x0
++#define CMD_FILL 0x1
++#define CMD_CPY 0x3
++#define CMD_CHK 0x4
++
++enum RAID_DMA_REGISTER {
++ RAID_DMA_DEVICE_ID = 0xff00,
++ RAID_DMA_STATUS = 0xff04,
++ RAID_FCHDMA_CTRL = 0xff08,
++ RAID_FCHDMA_FIRST_DESC = 0xff0C,
++ RAID_FCHDMA_CURR_DESC = 0xff10,
++ RAID_STRDMA_CTRL = 0xff14,
++ RAID_STRDMA_FIRST_DESC = 0xff18,
++ RAID_STRDMA_CURR_DESC = 0xff1C,
++ RAID_TX_FLG_REG = 0xff24,
++ RAID_RX_FLG_REG = 0xff34,
++ RAID_PCR = 0xff50,
++ SMC_CMD_REG = 0xff60,
++ SMC_STATUS_REG = 0xff64
++ };
++
++enum RAID_FUNC_MODE {
++ RAID_XOR = 0,
++ RAID_MIX = 2,
++ RAID_SRAM = 3,
++ RAID_ENDIAN = 4,
++ RAID_MEM_BLK = 5,
++ RAID_MEM2MEM = 7,
++ RAID_BUF_SIZE = 8,
++ RAID_ERR_TEST = 9,
++ RAID_BURST = 10,
++ RAID_BUS = 11
++ };
++
++typedef struct reg_info {
++ int mask;
++ char err[32];
++ int offset;
++} REG_INFO;
++
++/********************************************************/
++/* the definition of RAID DMA Module Register */
++/********************************************************/
++typedef union
++{
++ unsigned int bit32;
++ struct bits_ff00
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int : 8;
++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/
++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */
++ unsigned int device_id : 12;
++ unsigned int revision_id : 4;
++ #else
++ unsigned int revision_id : 4;
++ unsigned int device_id : 12;
++ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */
++ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/
++ unsigned int : 8;
++ #endif
++ } bits;
++} RAID_DMA_DEVICE_ID_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff04
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int tsFinishI : 1; /* owner bit error interrupt */
++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */
++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */
++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */
++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */
++ unsigned int rsFinishI : 1; /* owner bit error interrupt */
++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */
++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */
++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */
++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */
++ unsigned int inter : 8; /* pattern check error interrupt */
++ unsigned int : 5;
++ unsigned int Loopback : 1; /* loopback */
++ unsigned int intEnable : 8; /*pattern check error interrupt enable */
++ #else
++ unsigned int intEnable : 8; /*pattern check error interrupt enable */
++ unsigned int Loopback : 1; /* loopback */
++ unsigned int : 5;
++ unsigned int inter : 8; /* pattern check error interrupt */
++ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */
++ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */
++ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */
++ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */
++ unsigned int rsFinishI : 1; /* owner bit error interrupt */
++ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */
++ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */
++ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */
++ unsigned int tsDErrI : 1; /* AHB bus error interrupt */
++ unsigned int tsFinishI : 1; /* owner bit error interrupt */
++ #endif
++ } bits;
++} RAID_DMA_STATUS_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff08
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int td_start : 1; /* Start DMA transfer */
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int td_prot : 4; /* DMA protection control */
++ unsigned int td_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int td_bus : 2; /* peripheral bus width */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++ #else
++ unsigned int : 14;
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
++ unsigned int td_prot : 4; /* TxDMA protection control */
++ unsigned int : 1;
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_start : 1; /* Start DMA transfer */
++ #endif
++ } bits;
++} RAID_TXDMA_CTRL_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff0c
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int : 3;
++ #else
++ unsigned int : 3;
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++ #endif
++ } bits;
++} RAID_TXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff10
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int : 1;
++ unsigned int sof_eof : 2;
++ #else
++ unsigned int sof_eof : 2;
++ unsigned int : 1;
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++ #endif
++ } bits;
++} RAID_TXDMA_CURR_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff14
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int rd_start : 1; /* Start DMA transfer */
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++ #else
++ unsigned int : 14;
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int : 1;
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_start : 1; /* Start DMA transfer */
++ #endif
++ } bits;
++} RAID_RXDMA_CTRL_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff18
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int : 3;
++ #else
++ unsigned int : 3;
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++ #endif
++ } bits;
++} RAID_RXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff1c
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int sof_eof : 2;
++ #else
++ unsigned int sof_eof : 2;
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++ #endif
++ } bits;
++} RAID_RXDMA_CURR_DESC_T;
++
++typedef union
++{
++ unsigned int bit32;
++ struct bits_ff50
++ {
++ unsigned int pat : 32; /* data for pattern check */
++ } bits;
++} RAID_PACR_T;
++
++/******************************************************/
++/* the definition of DMA Descriptor Register */
++/******************************************************/
++typedef struct raid_descriptor_t
++{
++ union func_ctrl_t
++ {
++ unsigned int bit32;
++ struct bits_0000
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int own : 1; /* owner bit */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */
++ unsigned int desc_cnt : 6;
++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/
++ #else
++ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/
++ unsigned int desc_cnt : 6;
++ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int own : 1; /* owner bit */
++ #endif
++ } bits;
++ } func_ctrl;
++
++ union flg_status_t
++ {
++ unsigned int bits32;
++ struct bit_004
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int bcc : 16;
++ unsigned int : 13
++ unsigned int mode : 3;
++ #else
++ unsigned int mode : 3;
++ unsigned int : 13;
++ unsigned int bcc : 16;
++ #endif
++ } bits_cmd_status;
++ } flg_status; //Sanders
++
++ unsigned int buf_addr;
++
++ union next_desc_addr_t
++ {
++ unsigned int bits32;
++ struct bits_000c
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int : 1;
++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */
++ #else
++ unsigned int sof_eof : 2; /* the position of the descriptor in chain */
++ unsigned int : 1;
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++ #endif
++ } bits;
++ } next_desc_addr;
++} RAID_DESCRIPTOR_T;
++
++/******************************************************/
++/* the offset of RAID SMC register */
++/******************************************************/
++enum RAID_SMC_REGISTER {
++ RAID_SMC_CMD_REG = 0xff60,
++ RAID_SMC_STATUS_REG = 0xff64
++ };
++
++/******************************************************/
++/* the definition of RAID SMC module register */
++/******************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff60
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int pat_mode : 2; /* partition mode selection */
++ unsigned int : 14;
++ unsigned int device_id : 12;
++ unsigned int revision_id : 4;
++ #else
++ unsigned int revision_id : 4;
++ unsigned int device_id : 12;
++ unsigned int : 14;
++ unsigned int pat_mode : 2; /* partition mode selection */
++ #endif
++ } bits;
++} RAID_SMC_CMD;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bits_ff64
++ {
++ #ifdef BIG_ENDIAN
++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */
++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */
++ unsigned int : 14;
++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */
++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */
++ unsigned int : 14;
++ #else
++ unsigned int : 14;
++ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */
++ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */
++ unsigned int : 14;
++ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */
++ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */
++ #endif
++ } bits;
++} RAID_SMC_STATUS;
++
++typedef struct RAID_S
++{
++ const char *device_name;
++ wait_queue_head_t wait;
++ unsigned int busy;
++ int irq;
++ unsigned int status;
++ RAID_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address */
++ RAID_DESCRIPTOR_T *rx_desc; /* point ot virtual RX descriptor address */
++ RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */
++ RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */
++ RAID_DESCRIPTOR_T *tx_finished_desc;
++ RAID_DESCRIPTOR_T *rx_finished_desc;
++ RAID_DESCRIPTOR_T *tx_first_desc;
++ RAID_DESCRIPTOR_T *rx_first_desc;
++
++// unsigned int *tx_buf[TX_DESC_NUM];
++ unsigned int *rx_desc_dma; // physical address of rx_descript
++ unsigned int *tx_desc_dma; // physical address of tx_descript
++ unsigned int *rx_bufs_dma;
++ unsigned int *tx_bufs_dma;
++
++} RAID_T;
++
++struct reg_ioctl
++{
++ unsigned int reg_addr;
++ unsigned int val_in;
++ unsigned int val_out;
++};
++
++typedef struct dma_ctrl {
++ int sram;
++ int prot;
++ int burst;
++ int bus;
++ int endian;
++ int mode;
++} DMA_CTRL;
++
++
++#ifdef XOR_SW_FILL_IN
++
++#define __XOR(a1, a2) a1 ^= a2
++
++#define GET_BLOCK_2(dst) \
++ __asm__("ldmia %0, {%1, %2}" \
++ : "=r" (dst), "=r" (a1), "=r" (a2) \
++ : "0" (dst))
++
++#define GET_BLOCK_4(dst) \
++ __asm__("ldmia %0, {%1, %2, %3, %4}" \
++ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
++ : "0" (dst))
++
++#define XOR_BLOCK_2(src) \
++ __asm__("ldmia %0!, {%1, %2}" \
++ : "=r" (src), "=r" (b1), "=r" (b2) \
++ : "0" (src)); \
++ __XOR(a1, b1); __XOR(a2, b2);
++
++#define XOR_BLOCK_4(src) \
++ __asm__("ldmia %0!, {%1, %2, %3, %4}" \
++ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
++ : "0" (src)); \
++ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
++
++#define PUT_BLOCK_2(dst) \
++ __asm__ __volatile__("stmia %0!, {%2, %3}" \
++ : "=r" (dst) \
++ : "0" (dst), "r" (a1), "r" (a2))
++
++#define PUT_BLOCK_4(dst) \
++ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \
++ : "=r" (dst) \
++ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
++
++static void
++xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
++{
++ unsigned int lines = bytes / sizeof(unsigned long) / 4;
++ register unsigned int a1 __asm__("r4");
++ register unsigned int a2 __asm__("r5");
++ register unsigned int a3 __asm__("r6");
++ register unsigned int a4 __asm__("r7");
++ register unsigned int b1 __asm__("r8");
++ register unsigned int b2 __asm__("r9");
++ register unsigned int b3 __asm__("ip");
++ register unsigned int b4 __asm__("lr");
++
++ do {
++ GET_BLOCK_4(p1);
++ XOR_BLOCK_4(p2);
++ PUT_BLOCK_4(p1);
++ } while (--lines);
++}
++
++static void
++xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3)
++{
++ unsigned int lines = bytes / sizeof(unsigned long) / 4;
++ register unsigned int a1 __asm__("r4");
++ register unsigned int a2 __asm__("r5");
++ register unsigned int a3 __asm__("r6");
++ register unsigned int a4 __asm__("r7");
++ register unsigned int b1 __asm__("r8");
++ register unsigned int b2 __asm__("r9");
++ register unsigned int b3 __asm__("ip");
++ register unsigned int b4 __asm__("lr");
++
++ do {
++ GET_BLOCK_4(p1);
++ XOR_BLOCK_4(p2);
++ XOR_BLOCK_4(p3);
++ PUT_BLOCK_4(p1);
++ } while (--lines);
++}
++
++static void
++xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4)
++{
++ unsigned int lines = bytes / sizeof(unsigned long) / 2;
++ register unsigned int a1 __asm__("r8");
++ register unsigned int a2 __asm__("r9");
++ register unsigned int b1 __asm__("ip");
++ register unsigned int b2 __asm__("lr");
++
++ do {
++ GET_BLOCK_2(p1);
++ XOR_BLOCK_2(p2);
++ XOR_BLOCK_2(p3);
++ XOR_BLOCK_2(p4);
++ PUT_BLOCK_2(p1);
++ } while (--lines);
++}
++
++static void
++xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4, unsigned long *p5)
++{
++ unsigned int lines = bytes / sizeof(unsigned long) / 2;
++ register unsigned int a1 __asm__("r8");
++ register unsigned int a2 __asm__("r9");
++ register unsigned int b1 __asm__("ip");
++ register unsigned int b2 __asm__("lr");
++
++ do {
++ GET_BLOCK_2(p1);
++ XOR_BLOCK_2(p2);
++ XOR_BLOCK_2(p3);
++ XOR_BLOCK_2(p4);
++ XOR_BLOCK_2(p5);
++ PUT_BLOCK_2(p1);
++ } while (--lines);
++}
++#endif //XOR_SW_FILL_IN
++
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/irq.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/irq.c 2008-03-14 11:58:14.702460322 +0200
+@@ -0,0 +1,202 @@
++/*
++ * linux/arch/arm/mach-epxa10db/irq.c
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/stddef.h>
++#include <linux/list.h>
++#include <linux/sched.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/io.h>
++#include <asm/mach/irq.h>
++#include <asm/arch/platform.h>
++#include <asm/arch/int_ctrl.h>
++
++#ifdef CONFIG_PCI
++#include <asm/arch/pci.h>
++#endif
++
++int fixup_irq(unsigned int irq)
++{
++#ifdef CONFIG_PCI
++ if (irq == IRQ_PCI) {
++ return sl2312_pci_get_int_src();
++ }
++#endif
++ return irq;
++}
++
++static void sl2312_ack_irq(unsigned int irq)
++{
++ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++}
++
++static void sl2312_mask_irq(unsigned int irq)
++{
++ unsigned int mask;
++
++#ifdef CONFIG_PCI
++ if (irq >= PCI_IRQ_OFFSET)
++ {
++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask &= ~IRQ_PCI_MASK ;
++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET);
++ }
++ else
++#endif
++ if(irq >= FIQ_OFFSET)
++ {
++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask &= ~(1 << (irq - FIQ_OFFSET));
++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ }
++ else
++ {
++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask &= ~(1 << irq);
++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ }
++
++}
++
++static void sl2312_unmask_irq(unsigned int irq)
++{
++ unsigned int mask;
++
++#ifdef CONFIG_PCI
++ if (irq >= PCI_IRQ_OFFSET)
++ {
++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask |= IRQ_PCI_MASK ;
++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET);
++ }
++ else
++#endif
++ if(irq >= FIQ_OFFSET)
++ {
++ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask |= (1 << (irq - FIQ_OFFSET));
++ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ }
++ else
++ {
++ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ mask |= (1 << irq);
++ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ }
++}
++
++static struct irq_chip sl2312_level_irq = {
++ .ack = sl2312_mask_irq,
++ .mask = sl2312_mask_irq,
++ .unmask = sl2312_unmask_irq,
++// .set_type = ixp4xx_set_irq_type,
++};
++
++static struct irq_chip sl2312_edge_irq = {
++ .ack = sl2312_ack_irq,
++ .mask = sl2312_mask_irq,
++ .unmask = sl2312_unmask_irq,
++// .set_type = ixp4xx_set_irq_type,
++};
++
++static struct resource irq_resource = {
++ .name = "irq_handler",
++ .start = IO_ADDRESS(SL2312_INTERRUPT_BASE),
++ .end = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4,
++};
++
++void __init sl2312_init_irq(void)
++{
++ unsigned int i, mode, level;
++
++ request_resource(&iomem_resource, &irq_resource);
++
++ for (i = 0; i < NR_IRQS; i++)
++ {
++ if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX))
++ {
++ set_irq_chip(i, &sl2312_edge_irq);
++ set_irq_handler(i, handle_edge_irq);
++ }
++ else
++ {
++ set_irq_chip(i, &sl2312_level_irq);
++ set_irq_handler(i,handle_level_irq);
++ }
++ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
++ }
++
++ /* Disable all interrupt */
++ __raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ __raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++
++ /* Set interrupt mode */
++ /* emac & ipsec type is level trigger and high active */
++ mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++
++ mode &= ~IRQ_GMAC0_MASK;
++ level &= ~IRQ_GMAC0_MASK;
++
++ mode &= ~IRQ_GMAC1_MASK;
++ level &= ~IRQ_GMAC1_MASK;
++
++ mode &= ~IRQ_IPSEC_MASK;
++ level &= ~IRQ_IPSEC_MASK;
++
++ // for IDE0,1, high active and level trigger
++ mode &= ~IRQ_IDE0_MASK;
++ level &= ~IRQ_IDE0_MASK;
++ mode &= ~IRQ_IDE1_MASK;
++ level &= ~IRQ_IDE1_MASK;
++
++
++ // for PCI, high active and level trigger
++ mode &= ~IRQ_PCI_MASK;
++ level &= ~IRQ_PCI_MASK;
++
++ // for USB, high active and level trigger
++ mode &= ~IRQ_USB0_MASK;
++ level &= ~IRQ_USB0_MASK;
++
++ mode &= ~IRQ_USB1_MASK;
++ level &= ~IRQ_USB1_MASK;
++
++ // for LPC, high active and edge trigger
++ mode |= 0xffff0000;
++ level &= 0x0000ffff;
++
++ // for GPIO, high active and level trigger
++ mode &= ~(IRQ_GPIO_MASK);
++ level &= ~(IRQ_GPIO_MASK);
++
++ mode &= ~(IRQ_GPIO1_MASK);
++ level &= ~(IRQ_GPIO1_MASK);
++
++ mode &= ~(IRQ_GPIO2_MASK);
++ level &= ~(IRQ_GPIO2_MASK);
++
++ __raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ __raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++
++}
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/lpc.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/lpc.c 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,125 @@
++/*
++ *
++ * BRIEF MODULE DESCRIPTION
++ * ITE Semi IT8712 Super I/O functions.
++ *
++ * Copyright 2001 MontaVista Software Inc.
++ * Author: MontaVista Software, Inc.
++ * ppopov@mvista.com or source@mvista.com
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++#include <asm/types.h>
++#include <asm/arch/it8712.h>
++#include <linux/init.h>
++#include <asm/arch/hardware.h>
++
++#ifndef TRUE
++#define TRUE 1
++#endif
++
++#ifndef FALSE
++#define FALSE 0
++#endif
++
++
++// MB PnP configuration register
++#define LPC_KEY_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e)
++#define LPC_DATA_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f)
++
++#define LPC_BUS_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0)
++#define LPC_BUS_STATUS *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2)
++#define LPC_SERIAL_IRQ_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4)
++
++int it8712_exist;
++
++static void LPCEnterMBPnP(void)
++{
++ int i;
++ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
++
++ for (i = 0; i<4; i++)
++ outb(key[i], LPC_KEY_ADDR);
++
++}
++
++static void LPCExitMBPnP(void)
++{
++ outb(0x02, LPC_KEY_ADDR);
++ outb(0x02, LPC_DATA_ADDR);
++}
++
++void LPCSetConfig(char LdnNumber, char Index, char data)
++{
++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
++ outb(0x07, LPC_KEY_ADDR);
++ outb(LdnNumber, LPC_DATA_ADDR);
++ outb(Index, LPC_KEY_ADDR);
++ outb(data, LPC_DATA_ADDR);
++ LPCExitMBPnP();
++}
++
++char LPCGetConfig(char LdnNumber, char Index)
++{
++ char rtn;
++
++ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
++ outb(0x07, LPC_KEY_ADDR);
++ outb(LdnNumber, LPC_DATA_ADDR);
++ outb(Index, LPC_KEY_ADDR);
++ rtn = inb(LPC_DATA_ADDR);
++ LPCExitMBPnP();
++ return rtn;
++}
++
++static int SearchIT8712(void)
++{
++ unsigned char Id1, Id2;
++ unsigned short Id;
++
++ LPCEnterMBPnP();
++ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
++ Id1 = inb(LPC_DATA_ADDR);
++ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
++ Id2 = inb(LPC_DATA_ADDR);
++ Id = (Id1 << 8) | Id2;
++ LPCExitMBPnP();
++ if (Id == 0x8712)
++ return TRUE;
++ else
++ return FALSE;
++}
++
++int InitLPCInterface(void)
++{
++ LPC_BUS_CTRL = 0xc0;
++ LPC_SERIAL_IRQ_CTRL = 0xc0;
++ mdelay(1); // wait for 1 serial IRQ cycle
++ LPC_SERIAL_IRQ_CTRL = 0x80;
++ it8712_exist = SearchIT8712();
++ printk("IT8712 %s exist\n", it8712_exist?"":"doesn't");
++ return 0;
++}
++
++//__initcall(InitLPCInterface);
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/mm.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/mm.c 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,80 @@
++/*
++ * linux/arch/arm/mach-epxa10db/mm.c
++ *
++ * MM routines for Altera'a Epxa10db board
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/sched.h>
++#include <linux/mm.h>
++#include <linux/init.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/pgtable.h>
++#include <asm/page.h>
++#include <asm/sizes.h>
++
++#include <asm/mach/map.h>
++
++/* Page table mapping for I/O region */
++static struct map_desc sl2312_io_desc[] __initdata = {
++#ifdef CONFIG_GEMINI_IPI
++{__phys_to_virt(CPU_1_MEM_BASE), __phys_to_pfn(CPU_1_MEM_BASE), SZ_64M, MT_MEMORY},
++#endif
++{IO_ADDRESS(SL2312_SRAM_BASE), __phys_to_pfn(SL2312_SRAM_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GLOBAL_BASE), __phys_to_pfn(SL2312_GLOBAL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_WAQTCHDOG_BASE), __phys_to_pfn(SL2312_WAQTCHDOG_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_UART_BASE), __phys_to_pfn(SL2312_UART_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_TIMER_BASE), __phys_to_pfn(SL2312_TIMER_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_LCD_BASE), __phys_to_pfn(SL2312_LCD_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_RTC_BASE), __phys_to_pfn(SL2312_RTC_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_SATA_BASE), __phys_to_pfn(SL2312_SATA_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_LPC_HOST_BASE), __phys_to_pfn(SL2312_LPC_HOST_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_LPC_IO_BASE), __phys_to_pfn(SL2312_LPC_IO_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_INTERRUPT_BASE), __phys_to_pfn(SL2312_INTERRUPT_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_INTERRUPT1_BASE), __phys_to_pfn(SL2312_INTERRUPT1_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_SSP_CTRL_BASE), __phys_to_pfn(SL2312_SSP_CTRL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_POWER_CTRL_BASE), __phys_to_pfn(SL2312_POWER_CTRL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_CIR_BASE), __phys_to_pfn(SL2312_CIR_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GPIO_BASE), __phys_to_pfn(SL2312_GPIO_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GPIO_BASE1), __phys_to_pfn(SL2312_GPIO_BASE1), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GPIO_BASE2), __phys_to_pfn(SL2312_GPIO_BASE2), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_PCI_IO_BASE), __phys_to_pfn(SL2312_PCI_IO_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_PCI_MEM_BASE), __phys_to_pfn(SL2312_PCI_MEM_BASE), SZ_512K, MT_DEVICE},
++#ifdef CONFIG_NET_SL351X
++{IO_ADDRESS(SL2312_TOE_BASE), __phys_to_pfn(SL2312_TOE_BASE) , SZ_512K, MT_DEVICE},
++#endif
++{IO_ADDRESS(SL2312_GMAC0_BASE), __phys_to_pfn(SL2312_GMAC0_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GMAC1_BASE), __phys_to_pfn(SL2312_GMAC1_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_SECURITY_BASE), __phys_to_pfn(SL2312_SECURITY_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_IDE0_BASE), __phys_to_pfn(SL2312_IDE0_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_IDE1_BASE), __phys_to_pfn(SL2312_IDE1_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_RAID_BASE), __phys_to_pfn(SL2312_RAID_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_FLASH_CTRL_BASE), __phys_to_pfn(SL2312_FLASH_CTRL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_GENERAL_DMA_BASE), __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_USB0_BASE), __phys_to_pfn(SL2312_USB_BASE), SZ_512K, MT_DEVICE},
++{IO_ADDRESS(SL2312_USB1_BASE), __phys_to_pfn(SL2312_USB1_BASE), SZ_512K, MT_DEVICE},
++{FLASH_VADDR(SL2312_FLASH_BASE), __phys_to_pfn(SL2312_FLASH_BASE), SZ_16M, MT_DEVICE},
++};
++
++void __init sl2312_map_io(void)
++{
++ iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc));
++}
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/pci.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/pci.c 2008-03-14 12:56:27.401497897 +0200
+@@ -0,0 +1,359 @@
++/*
++ * linux/arch/arm/mach-sl2312/pci_sl2312.c
++ *
++ * PCI functions for sl2312 host PCI bridge
++ *
++ * Copyright (C) 2003 StorLink Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/sched.h>
++#include <linux/kernel.h>
++#include <linux/pci.h>
++#include <linux/ptrace.h>
++#include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/interrupt.h>
++#include <linux/spinlock.h>
++#include <linux/init.h>
++
++#include <asm/sizes.h>
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/mach/pci.h>
++#include <asm/mach/irq.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch/pci.h>
++
++//#define DEBUG
++
++// sl2312 PCI bridge access routines
++
++#define PCI_IOSIZE_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE)))
++#define PCI_PROT_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04))
++#define PCI_CTRL_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08))
++#define PCI_SOFTRST_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10))
++#define PCI_CONFIG_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28))
++#define PCI_DATA_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C))
++
++static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED;
++// for initialize PCI devices
++struct resource pci_ioport_resource = {
++ .name = "PCI I/O Space",
++ .start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100,
++ .end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1,
++ .flags = IORESOURCE_IO,
++};
++struct resource pci_iomem_resource = {
++ .name = "PCI Mem Space",
++ .start = SL2312_PCI_MEM_BASE,
++ .end = SL2312_PCI_MEM_BASE + SZ_128M - 1,
++ .flags = IORESOURCE_MEM,
++};
++
++static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val)
++{
++ unsigned long addr,data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&sl2312_pci_lock, flags);
++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
++ PCI_CONFIG_REG = addr;
++ data = PCI_DATA_REG;
++
++ switch (size) {
++ case 1:
++ *val = (u8) (data >> ((where & 0x03) * 8));
++ break;
++ case 2:
++ *val = (u16) (data >> ((where & 0x02) * 8));
++ break;
++ case 4:
++ *val = data;
++ if ((where >= 0x10) && (where <= 0x24)) {
++ if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) {
++ *val &= 0x000fffff;
++ *val |= IO_ADDRESS(SL2312_PCI_IO_BASE);
++ }
++ }
++ break;
++ }
++ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
++// printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val);
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val)
++{
++ unsigned long addr,data;
++ unsigned long flags;
++
++ spin_lock_irqsave(&sl2312_pci_lock, flags);
++ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
++ PCI_CONFIG_REG = addr;
++ data = PCI_DATA_REG;
++
++ switch (size) {
++ case 1:
++ data &= ~(0xff << ((where & 0x03) * 8));
++ data |= (val << ((where & 0x03) * 8));
++ PCI_DATA_REG = data;
++ break;
++ case 2:
++ data &= ~(0xffff << ((where & 0x02) * 8));
++ data |= (val << ((where & 0x02) * 8));
++ PCI_DATA_REG = data;
++ break;
++ case 4:
++ if ((where >= 0x10) && (where <= 0x24)) {
++ if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) {
++ val &= 0x000fffff;
++ val |= SL2312_PCI_IO_BASE;
++ }
++ }
++ PCI_DATA_REG = val;
++ break;
++ }
++ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
++
++// printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val);
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static struct pci_ops sl2312_pci_ops = {
++ .read = sl2312_read_config,
++ .write = sl2312_write_config,
++};
++
++
++int __init sl2312_pci_setup_resources(struct resource **resource)
++{
++ PCI_IOSIZE_REG = 0; // 1M IO size
++ PCI_CTRL_REG = 0x06;
++
++ resource[0] = &pci_ioport_resource;
++ resource[1] = &pci_iomem_resource;
++ resource[2] = NULL;
++
++ return 1;
++}
++
++//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs)
++//{
++// return 1;
++//}
++
++
++/**********************************************************************
++ * MASK(disable) PCI interrupt
++ * 0: PCI INTA, 1: PCI INTB, ... // for Linux interrupt routing
++ * 16: PERR // for PCI module internal use
++ * 17: SERR,.. respect to PCI CTRL2 REG
++ **********************************************************************/
++void sl2312_pci_mask_irq(unsigned int irq)
++{
++ struct pci_bus bus;
++ unsigned int tmp;
++
++ bus.number = 0;
++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
++ if (irq < 16) { // for linux int routing
++ tmp &= ~(1 << (irq + 16 + 6));
++ }
++ else {
++ tmp &= ~(1 << irq);
++ }
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++}
++
++/* UNMASK(enable) PCI interrupt */
++void sl2312_pci_unmask_irq(unsigned int irq)
++{
++ struct pci_bus bus;
++ unsigned int tmp;
++
++ bus.number = 0;
++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
++ if (irq < 16) { // for linux int routing
++ tmp |= (1 << (irq + 16 + 6));
++ }
++ else {
++ tmp |= (1 << irq);
++ }
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++}
++
++/* Get PCI interrupt source */
++int sl2312_pci_get_int_src(void)
++{
++ struct pci_bus bus;
++ unsigned int tmp=0;
++
++ bus.number = 0;
++ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
++ if (tmp & (1 << 28)) { // PCI INTA
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++ return IRQ_PCI_INTA;
++ }
++ if (tmp & (1 << 29)) { // PCI INTB
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++ return IRQ_PCI_INTB;
++ }
++ if (tmp & (1 << 30)) { // PCI INTC
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++ return IRQ_PCI_INTC;
++ }
++ if (tmp & (1 << 31)) { // PCI INTD
++ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
++ return IRQ_PCI_INTD;
++ }
++ // otherwise, it should be a PCI error
++ return IRQ_PCI;
++}
++
++static irqreturn_t sl2312_pci_irq(int irq, void *devid)
++{
++ struct irq_desc *desc;
++ struct irqaction *action;
++ int retval = 0;
++
++ return 1;
++
++ irq = sl2312_pci_get_int_src();
++ desc = &irq_desc[irq];
++ action = desc->action;
++ do {
++ retval |= action->handler(irq, devid);
++ action = action->next;
++ } while (action);
++
++ return 1;
++}
++
++//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs);
++
++void __init sl2312_pci_preinit(void)
++{
++ struct pci_bus bus;
++ unsigned long flags;
++ unsigned int temp;
++ int ret;
++
++ /*
++ * Hook in our fault handler for PCI errors
++ */
++// external_fault = sl2312_pci_fault;
++
++ spin_lock_irqsave(&sl2312_pci_lock, flags);
++
++ /*
++ * Grab the PCI interrupt.
++ */
++ ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL);
++ if (ret)
++ printk(KERN_ERR "PCI: unable to grab PCI error "
++ "interrupt: %d\n", ret);
++
++ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
++
++ // setup pci bridge
++ bus.number = 0; /* device 0, function 0 */
++ temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16);
++ sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp);
++}
++
++/*
++ * No swizzle on SL2312
++ */
++static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp)
++{
++ return PCI_SLOT(dev->devfn);
++}
++
++/*
++ * map the specified device/slot/pin to an IRQ. This works out such
++ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
++ */
++static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++ int intnr = ((slot + (pin - 1)) & 3) + 4; /* the IRQ number of PCI bridge */
++
++ // printk("%s : slot = %d pin = %d \n",__func__,slot,pin);
++ switch (slot)
++ {
++ case 12:
++ if (pin==1)
++ {
++ intnr = 3;
++ }
++ else
++ {
++ intnr = 0;
++ }
++ break;
++ case 11:
++ intnr = (2 + (pin - 1)) & 3;
++ break;
++ case 10:
++ intnr = (1 + (pin - 1)) & 3;
++ break;
++ case 9:
++ intnr = (pin - 1) & 3;
++ break;
++ }
++// if (slot == 10)
++// intnr = (1 + (pin - 1)) & 3;
++// else if (slot == 9)
++// intnr = (pin - 1) & 3;
++ return (IRQ_PCI_INTA + intnr);
++}
++
++struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
++{
++ return (pci_scan_bus(0, &sl2312_pci_ops, sysdata));
++
++}
++
++int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys)
++{
++ int ret = 0;
++
++ if (nr == 0) {
++ ret = sl2312_pci_setup_resources(sys->resource);
++ }
++
++ return ret;
++}
++
++
++struct hw_pci sl2312_pci __initdata = {
++ .setup = sl2312_pci_setup,
++ .preinit = sl2312_pci_preinit,
++ .nr_controllers = 1,
++ .swizzle = sl2312_pci_swizzle,
++ .map_irq = sl2312_pci_map_irq,
++ .scan = sl2312_pci_scan_bus,
++};
++
++static int __init sl2312_pci_init(void)
++{
++ if (machine_is_sl2312())
++ pci_common_init(&sl2312_pci);
++ return 0;
++}
++
++subsys_initcall(sl2312_pci_init);
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg-1.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg-1.c 2008-03-15 16:53:18.340655940 +0200
+@@ -0,0 +1,64 @@
++/*
++ * linux/arch/arm/mach-pxa/sl2312.c
++ *
++ * Author: Nicolas Pitre
++ * Created: Nov 05, 2002
++ * Copyright: MontaVista Software Inc.
++ *
++ * Code specific to sl2312 aka Bulverde.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pm.h>
++#include <linux/device.h>
++#include "asm/arch/sl2312.h"
++#include "asm/arch/irqs.h"
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <linux/platform_device.h>
++
++/*
++ * device registration specific to sl2312.
++ */
++
++static u64 sl2312_dmamask_1 = 0xffffffffUL;
++
++static struct resource sl2312_otg_resources_1[] = {
++ [0] = {
++ .start = 0x69000000,
++ .end = 0x69000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_USB1,
++ .end = IRQ_USB1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device ehci_1_device = {
++ .name = "ehci-hcd-FOTG2XX",
++ .id = -1,
++ .dev = {
++ .dma_mask = &sl2312_dmamask_1,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1),
++ .resource = sl2312_otg_resources_1,
++};
++
++static struct platform_device *devices[] __initdata = {
++ &ehci_1_device,
++};
++
++static int __init sl2312_1_init(void)
++{
++ return platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++subsys_initcall(sl2312_1_init);
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl2312-otg.c 2008-03-14 12:33:51.324219457 +0200
+@@ -0,0 +1,87 @@
++/*
++ * linux/arch/arm/mach-pxa/sl2312.c
++ *
++ * Author: Nicolas Pitre
++ * Created: Nov 05, 2002
++ * Copyright: MontaVista Software Inc.
++ *
++ * Code specific to sl2312 aka Bulverde.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pm.h>
++#include <linux/device.h>
++#include "asm/arch/sl2312.h"
++#include "asm/arch/irqs.h"
++#include <asm/hardware.h>
++#include <asm/irq.h>
++#include <linux/platform_device.h>
++
++/*
++ * device registration specific to sl2312.
++ */
++
++static u64 sl2312_dmamask = 0xffffffffUL;
++
++static struct resource sl2312_otg_resources_1[] = {
++ [0] = {
++ .start = 0x68000000,
++ .end = 0x68000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_USB0,
++ .end = IRQ_USB0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++static struct resource sl2312_otg_resources_2[] = {
++ [2] = {
++ .start = 0x69000000,
++ .end = 0x69000fff,
++ .flags = IORESOURCE_MEM,
++ },
++ [3] = {
++ .start = IRQ_USB1,
++ .end = IRQ_USB1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device ehci_device_1 = {
++ .name = "ehci-hcd-FOTG2XX",
++ .id = 1,
++ .dev = {
++ .dma_mask = &sl2312_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1),
++ .resource = sl2312_otg_resources_1,
++};
++
++static struct platform_device ehci_device_2 = {
++ .name = "ehci-hcd-FOTG2XX",
++ .id = 2,
++ .dev = {
++ .dma_mask = &sl2312_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(sl2312_otg_resources_2),
++ .resource = sl2312_otg_resources_2,
++};
++
++static struct platform_device *devices[] __initdata = {
++ &ehci_device_1, /* &ehci_device_2, */
++};
++
++static int __init sl2312_init(void)
++{
++ return platform_add_devices(devices, ARRAY_SIZE(devices));
++}
++
++subsys_initcall(sl2312_init);
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/sl3516_device.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/sl3516_device.c 2008-03-14 12:19:14.774267722 +0200
+@@ -0,0 +1,89 @@
++/*
++ * linux/arch/arm/mach-2312/sl3516_device.c
++ *
++ * Author: Nicolas Pitre
++ * Created: Nov 05, 2002
++ * Copyright: MontaVista Software Inc.
++ *
++ * Code specific to sl2312 aka Bulverde.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pm.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include "asm/arch/sl2312.h"
++#include "asm/arch/irqs.h"
++#include <asm/hardware.h>
++#include <asm/irq.h>
++
++/*
++ * device registration specific to sl2312.
++ */
++
++static u64 sl3516_dmamask = 0xffffffffUL;
++
++static struct resource sl3516_sata_resources[] = {
++ [0] = {
++ .start = 0x63400000,
++ .end = 0x63400040,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_IDE1,
++ .end = IRQ_IDE1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device sata_device = {
++ .name = "lepus-sata",
++ .id = -1,
++ .dev = {
++ .dma_mask = &sl3516_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(sl3516_sata_resources),
++ .resource = sl3516_sata_resources,
++};
++
++static struct resource sl3516_sata0_resources[] = {
++ [0] = {
++ .start = 0x63000000,
++ .end = 0x63000040,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = IRQ_IDE0,
++ .end = IRQ_IDE0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device sata0_device = {
++ .name = "lepus-sata0",
++ .id = -1,
++ .dev = {
++ .dma_mask = &sl3516_dmamask,
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .num_resources = ARRAY_SIZE(sl3516_sata0_resources),
++ .resource = sl3516_sata0_resources,
++};
++
++static struct platform_device *sata_devices[] __initdata = {
++ &sata_device,
++ &sata0_device,
++};
++
++static int __init sl3516_init(void)
++{
++ return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices));
++}
++
++subsys_initcall(sl3516_init);
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/time.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/time.c 2008-03-14 12:16:06.263525107 +0200
+@@ -0,0 +1,134 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/time.h
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <asm/io.h>
++#include <asm/system.h>
++#include <asm/leds.h>
++#include <asm/arch/hardware.h>
++#include <asm/mach/time.h>
++#define TIMER_TYPE (volatile unsigned int*)
++#include <asm/arch/timer.h>
++// #define FIQ_PLUS 1
++
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id)
++{
++// unsigned int led;
++ // ...clear the interrupt
++#ifdef FIQ_PLUS
++ *((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
++#else
++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
++#endif
++
++#if 0
++ if(!(jiffies % HZ))
++ {
++ led = jiffies / HZ;
++// printk("ticks %x \n", led);
++ }
++ do_leds();
++ do_timer(regs);
++ do_profile(regs);
++#endif
++ timer_tick();
++ return IRQ_HANDLED;
++}
++
++static struct irqaction sl2312_timer_irq = {
++ .name = "SL2312 Timer Tick",
++ .flags = IRQF_DISABLED | IRQF_TIMER,
++ .handler = sl2312_timer_interrupt,
++};
++
++unsigned long sl2312_gettimeoffset (void)
++{
++ return 0L;
++}
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ */
++void __init sl2312_time_init(void)
++{
++ // For clock rate adjusting
++ unsigned int tick_rate=0;
++
++#ifdef CONFIG_SL3516_ASIC
++ unsigned int clock_rate_base = 130000000;
++ unsigned int reg_v=0;
++
++ //--> Add by jason for clock adjust
++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS)));
++ reg_v >>= 15;
++ tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000);
++
++ // FPGA use AHB bus tick rate
++ printk("Bus: %dMHz",tick_rate/1000000);
++
++ tick_rate /= 6; // APB bus run AHB*(1/6)
++
++ switch((reg_v>>3)&3){
++ case 0: printk("(1/1)\n") ;
++ break;
++ case 1: printk("(3/2)\n") ;
++ break;
++ case 2: printk("(24/13)\n") ;
++ break;
++ case 3: printk("(2/1)\n") ;
++ break;
++ }
++ //<--
++#else
++ printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000); // FPGA use 20MHz
++ tick_rate = CLOCK_TICK_RATE;
++#endif
++
++
++ /*
++ * Make irqs happen for the system timer
++ */
++ // initialize timer interrupt
++ // low active and edge trigger
++#ifdef FIQ_PLUS
++ *((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
++ *((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
++ setup_irq(IRQ_TIMER1, &sl2312_timer_irq);
++ /* Start the timer */
++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK);
++#else
++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
++ setup_irq(IRQ_TIMER2, &sl2312_timer_irq);
++ /* Start the timer */
++ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
++ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
++ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK);
++#endif
++
++}
++
++
+Index: linux-2.6.23.16/arch/arm/mach-sl2312/xor.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mach-sl2312/xor.c 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,1200 @@
++/*
++ * arch/arm/mach-sl2312/xor.c
++ *
++ * Support functions for the Gemini Soc. This is
++ * a HW XOR unit that is specifically designed for use with RAID5
++ * applications. This driver provides an interface that is used by
++ * the Linux RAID stack.
++ *
++ * Original Author: Jason Lee<jason@storlink.com.tw>
++ *
++ * Contributors:Sanders<sanders@storlink.com.tw>
++ Jason Lee<jason@storlink.com.tw>
++ *
++ *
++ * Maintainer: Jason Lee<jason@storlink.com.tw>
++ *
++ * Copyright (C) 2005 Storlink Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ * History: (06/25/2005, DJ) Initial Creation
++ *
++ * Versing 1.0.0 Initial version
++ */
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/sched.h>
++#include <linux/spinlock.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/sched.h>
++#include <linux/wait.h>
++#include <linux/list.h>
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/mm.h>
++#include <asm/irq.h>
++#include <asm/delay.h>
++#include <asm/uaccess.h>
++#include <asm/cacheflush.h>
++#include <asm/hardware.h>
++#include <asm/arch/xor.h>
++#include <asm/pci.h>
++#include <linux/version.h>
++
++/*
++ * pick up local definitions
++ */
++#define XOR_SW_FILL_IN
++#include "hw_xor.h"
++
++
++//#define XOR_DEBUG
++//#define XOR_TEST 1
++#ifdef XOR_TEST
++#define TEST_ITERATION 1000
++#define SPIN_WAIT 1
++#endif
++#ifdef XOR_DEBUG
++#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args)
++#define DENTER() DPRINTK("Entered...\n");
++#define DEXIT() DPRINTK("Exited...\n");
++#else
++#define DPRINTK(s, args...)
++#define DENTER()
++#define DEXIT()
++#endif
++
++//#define SPIN_WAIT
++
++/* globals */
++static RAID_T tp;
++static RAID_TXDMA_CTRL_T txdma_ctrl;
++RAID_RXDMA_CTRL_T rxdma_ctrl;
++
++//#ifndef SPIN_WAIT
++static spinlock_t raid_lock;
++//#endif
++
++static unsigned int tx_desc_virtual_base;
++static unsigned int rx_desc_virtual_base;
++RAID_DESCRIPTOR_T *tx_desc_ptr;
++RAID_DESCRIPTOR_T *rx_desc_ptr;
++
++/* static prototypes */
++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
++
++static int gemini_xor_init_desc(void);
++
++static unsigned int raid_read_reg(unsigned int offset)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(RAID_BASE_ADDR + offset);
++ return (reg_val);
++}
++
++static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask)
++{
++ unsigned int reg_val;
++ unsigned int *addr;
++
++ reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask);
++ addr = (unsigned int *)(RAID_BASE_ADDR + offset);
++ writel(reg_val,addr);
++ return;
++}
++
++#ifndef SPIN_WAIT
++__inline__ void xor_queue_descriptor(void)
++{
++ unsigned int flags,status=1;
++
++ DPRINTK("Going to sleep");
++
++ while(status){
++ yield();
++ //schedule();
++ spin_lock_irqsave(&raid_lock,flags);
++ status = tp.busy;
++ spin_unlock_irqrestore(&raid_lock, flags);
++ }
++// tp.status = COMPLETE;
++ DPRINTK("woken up!");
++
++}
++#endif
++
++#ifdef SPIN_WAIT
++static void gemini_xor_isr(int d_n)
++#else
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
++static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs)
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs)
++#endif
++#endif
++{
++
++ unsigned int err;
++ RAID_DMA_STATUS_T dma_status;
++// RAID_DESCRIPTOR_T *rdesc,*tdesc;
++// unsigned int *paddr;
++
++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
++#ifdef SPIN_WAIT
++ while( (dma_status.bits32& (1<<31) ) ==0 ){
++ udelay(1);
++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
++ }
++
++/* tdesc = tp.tx_first_desc;
++ rdesc = tp.rx_first_desc;
++ for(d_n;d_n>0;d_n--){
++ if( tdesc->func_ctrl.bits.own == DMA ){
++ paddr = tdesc;
++ printk("error tx desc:0x%x\n",*paddr++);
++ printk("error tx desc:0x%x\n",*paddr++);
++ printk("error tx desc:0s%x\n",*paddr++);
++ printk("error tx desc:0x%x\n",*paddr);
++ while(1);
++ }
++ tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++ }
++
++ if( rdesc->func_ctrl.bits.own == DMA ){
++ paddr = rdesc;
++ printk("error rx desc:0x%x\n",*paddr++);
++ printk("error rx desc:0x%x\n",*paddr++);
++ printk("error rx desc:0s%x\n",*paddr++);
++ printk("error rx desc:0x%x\n",*paddr);
++ while(1);
++ }
++*/
++#endif
++
++ if(dma_status.bits32 & ((1<<31)|(1<<26))){
++ // if no bug , we can turn off rx finish interrupt
++ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
++ err = raid_read_reg(RAID_DMA_DEVICE_ID);
++ tp.busy = 0;
++
++ if(err&0x00FF0000){
++ tp.status = ERROR;
++ printk("XOR:<HW>%s error code %x\n",(err&0x00F00000)?"tx":"rx",err);
++
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
++ return ;
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#ifndef SPIN_WAIT
++ return IRQ_RETVAL(IRQ_HANDLED);
++#endif
++#endif
++ }
++ // 16~19 rx error code
++ // 20~23 tx error codd
++
++ dma_status.bits.tsFinishI = 1;
++ dma_status.bits.rsFinishI = 1;
++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000); // clear INT
++
++// printk("xor %d\n",d_n);
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
++ return ;
++#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++#ifndef SPIN_WAIT
++ return IRQ_RETVAL(IRQ_HANDLED);
++#endif
++#endif
++ }
++
++ #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
++ return ;
++ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
++ #ifndef SPIN_WAIT
++ printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32);
++ return IRQ_RETVAL(IRQ_HANDLED);
++ #endif
++ #endif
++}
++
++void
++xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
++{
++ int status=0;
++ unsigned int flags;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ spin_lock_irqsave(&raid_lock,flags);
++ while(tp.status != COMPLETE){
++ spin_unlock_irqrestore(&raid_lock, flags);
++ //printk("XOR yield2\n");
++#ifdef XOR_SW_FILL_IN
++ xor_arm4regs_2(bytes,p1,p2);
++ return ;
++#else
++ yield();
++#endif
++ }
++ spin_unlock_irqrestore(&raid_lock, flags);
++ tp.status = RUNNING;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync(p2, bytes, DMA_TO_DEVICE);
++
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00020000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++ wmb();
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00010000;
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
++
++ wmb();
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return ;
++ }
++
++ // change status
++// tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(2);
++#else
++ xor_queue_descriptor();
++#endif
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++// tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++
++void
++xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3)
++{
++ int status=0;
++ unsigned int flags;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ spin_lock_irqsave(&raid_lock,flags);
++ if(tp.status != COMPLETE){
++ spin_unlock_irqrestore(&raid_lock, flags);
++ //printk("XOR yield3\n");
++#ifdef XOR_SW_FILL_IN
++ xor_arm4regs_3(bytes,p1,p2,p3);
++ return;
++#else
++ yield();
++#endif
++ }
++ spin_unlock_irqrestore(&raid_lock, flags);
++ tp.status = RUNNING;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync(p2, bytes, DMA_TO_DEVICE);
++ consistent_sync(p3, bytes, DMA_TO_DEVICE);
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00020000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x0000000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00010000;
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
++
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript \n");
++ return ;
++ }
++
++ // change status
++// tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++ wmb();
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(3);
++#else
++ xor_queue_descriptor();
++#endif
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
++ //tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++
++void
++xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4)
++{
++ int status=0;
++ unsigned int flags;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ spin_lock_irqsave(&raid_lock,flags);
++ if(tp.status != COMPLETE){
++ spin_unlock_irqrestore(&raid_lock, flags);
++ //printk("S\n");
++#ifdef XOR_SW_FILL_IN
++ xor_arm4regs_4(bytes,p1,p2,p3,p4);
++ return;
++#else
++ msleep(1);
++ yield();
++#endif
++ }
++ spin_unlock_irqrestore(&raid_lock, flags);
++
++ tp.status = RUNNING;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync(p2, bytes, DMA_TO_DEVICE);
++ consistent_sync(p3, bytes, DMA_TO_DEVICE);
++ consistent_sync(p4, bytes, DMA_TO_DEVICE);
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00020000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00000000;
++ tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00000000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00010000;
++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
++
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return ;
++ }
++
++ // change status
++// tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++ wmb();
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(4);
++#else
++ xor_queue_descriptor();
++#endif
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
++ //tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++
++void
++xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4, unsigned long *p5)
++{
++
++ int status=0;
++ unsigned int flags;
++
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ spin_lock_irqsave(&raid_lock,flags);
++ while(tp.status != COMPLETE){
++ spin_unlock_irqrestore(&raid_lock, flags);
++ //printk("XOR yield5\n");
++#ifdef XOR_SW_FILL_IN
++ xor_arm4regs_5(bytes,p1,p2,p3,p4,p5);
++ return;
++#else
++ msleep(1);
++ yield();
++#endif
++ }
++ spin_unlock_irqrestore(&raid_lock, flags);
++ tp.status = RUNNING;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync(p2, bytes, DMA_TO_DEVICE);
++ consistent_sync(p3, bytes, DMA_TO_DEVICE);
++ consistent_sync(p4, bytes, DMA_TO_DEVICE);
++ consistent_sync(p5, bytes, DMA_TO_DEVICE);
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00020000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ wmb();
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00000000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ wmb();
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00000000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ wmb();
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++ tp.tx_desc->flg_status.bits32 = 0x00000000;
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ wmb();
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++
++
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p5); // pysical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
++// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
++// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->flg_status.bits32 = 0x00010000;
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
++ tp.tx_finished_desc = tp.tx_desc; // keep last descript
++
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return ;
++ }
++
++ // change status
++// tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++ wmb();
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(5);
++#else
++ xor_queue_descriptor();
++#endif
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
++ //tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++
++#ifdef XOR_TEST
++void
++raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes)
++{
++ int status=0,i;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ *p1 = pattern;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++
++ while(tp.status != COMPLETE){
++ DPRINTK("XOR yield\n");
++ //schedule();
++ yield();
++ }
++ tp.status = RUNNING;
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = 4; /* total frame byte count */
++ tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes; // bytes to fill
++ tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL; // only support memory FILL command
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
++
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++ tp.rx_finished_desc = tp.rx_desc;
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return ;
++ }
++
++ // change status
++ //tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(2);
++#else
++ xor_queue_descriptor();
++#endif
++
++ for(i=1; i<(bytes/sizeof(int)); i++) {
++ if(p1[0]!=p1[i]){
++ printk("pattern set error!\n");
++ while(1);
++ }
++ }
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++ //tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++#endif
++
++void
++raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes)
++{
++ int status=0,i;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(to, bytes, DMA_BIDIRECTIONAL);
++ consistent_sync(from,bytes, DMA_TO_DEVICE);
++
++ while(tp.status != COMPLETE){
++ DPRINTK("XOR yield\n");
++ //schedule();
++ yield();
++ }
++ tp.status = RUNNING;
++
++ tp.tx_desc = tp.tx_first_desc;
++ tp.rx_desc = tp.rx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(from); // physical address
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.tx_desc->flg_status.bits32 = CMD_CPY; // only support memory FILL command
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
++
++ // prepare rx descript
++ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
++ tp.rx_desc->buf_addr = (unsigned int)__pa(to);
++ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
++ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
++ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
++ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return ;
++ }
++
++ // change status
++ //tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ rxdma_ctrl.bits.rd_start = 1;
++ // start rx DMA
++ txdma_ctrl.bits.td_start = 1;
++
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(2);
++#else
++ xor_queue_descriptor();
++#endif
++
++#ifdef XOR_TEST
++ for(i=1; i<(bytes/sizeof(int)); i++) {
++ if(to[i]!=from[i]){
++ printk("pattern check error!\n");
++ printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]);
++ while(1);
++ }
++ }
++#endif
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++ tp.status = COMPLETE;
++// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++ //tp.rx_desc = tp.rx_first_desc ;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++
++}
++EXPORT_SYMBOL(raid_memcpy);
++
++#ifdef XOR_TEST
++int
++raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes)
++{
++ int status=0;
++ RAID_DMA_STATUS_T dma_status;
++
++ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
++ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
++ }
++
++ status = ((pattern&0xFFFF)%bytes )/4;
++ p1[status] = pattern;
++
++ while(tp.status != COMPLETE){
++ DPRINTK("XOR yield\n");
++ //schedule();
++ yield();
++ }
++ tp.status = RUNNING;
++
++ // flush the cache to memory before H/W XOR touches them
++ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
++
++ tp.tx_desc = tp.tx_first_desc;
++ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
++ // prepare tx descript
++ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
++ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
++ tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0;
++ tp.tx_desc->func_ctrl.bits.buffer_size = bytes ; /* total frame byte count */
++ tp.tx_desc->flg_status.bits32 = CMD_CHK; // only support memory FILL command
++ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
++ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
++// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
++
++ }
++ else{
++ /* no free tx descriptor */
++ printk("XOR:no free tx descript");
++ return -1;
++ }
++
++ // change status
++ //tp.status = RUNNING;
++ status = tp.busy = 1;
++
++ // start tx DMA
++ txdma_ctrl.bits.td_start = 1;
++
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
++// raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
++
++#ifdef SPIN_WAIT
++ gemini_xor_isr(2);
++#else
++ xor_queue_descriptor();
++#endif
++
++// dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
++// if (dma_status.bits32 & (1<<15)) {
++
++ if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) {
++ status = 1;
++// raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000);
++ }
++ else{
++ status = 0;
++ }
++
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
++ tp.status = COMPLETE;
++// tp.rx_desc->func_ctrl.bits.own = DMA;
++ return status ;
++}
++#endif
++
++int __init gemini_xor_init(void)
++{
++ unsigned int res;
++ unsigned int *paddr1,*paddr2,*paddr3,i;
++ unsigned volatile char *charact;
++ unsigned volatile short *two_char;
++ unsigned volatile int *four_char;
++
++ // init descript
++ res = gemini_xor_init_desc();
++ if(res) {
++ printk("Init RAID Descript Fail!!\n");
++ return -res;
++ }
++
++ tp.device_name = "Gemini XOR Acceleration";
++
++ // request irq
++#ifndef SPIN_WAIT
++ res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL);
++#endif
++ if(res){
++ printk(KERN_ERR "%s: unable to request IRQ %d for "
++ "HW XOR %d\n", tp.device_name, IRQ_RAID, res);
++ return -EBUSY;
++ }
++
++#ifdef XOR_TEST
++
++RETEST:
++ paddr1 = kmalloc(0x1000,GFP_KERNEL);
++ paddr2 = kmalloc(0x1000,GFP_KERNEL);
++ paddr3 = kmalloc(0x1000,GFP_KERNEL);
++ for(i=0;i<TEST_ITERATION;i++) {
++ printk("XOR test round %d\n",i);
++ for(res=0;res<(0x1000)/sizeof(int);res++){ // prepare data pattern
++ paddr1[res]= readl(0xf62000ac);
++ paddr2[res]= readl(0xf62000ac);
++ }
++ for(res=0;res<0x1000/sizeof(int);res++){ // calculate xor by software
++ paddr3[res] = paddr1[res]^paddr2[res];
++ }
++ xor_gemini_2(0x1000,paddr1,paddr2); // calculate xor by hw
++ for(res=0;res<0x1000/sizeof(int);res++){ // check error
++ if(paddr1[res]!=paddr3[res]){
++ printk("XOR ERROR\n");
++ printk("[%d][0x%x]=0x%x should be %x\n",res,&paddr1[res],paddr1[res],paddr3[res]);
++ while(1);
++ }
++ }
++ }
++ kfree(paddr1);
++ kfree(paddr2);
++ kfree(paddr3);
++
++
++ // memcpy test
++ paddr1 = kmalloc(0x4000,GFP_KERNEL);
++ for(i=0;i<TEST_ITERATION;i++) {
++ for(res=0;res<(0x4000)/sizeof(int);res++)
++ paddr1[res]= readl(0xf62000ac);
++
++ printk("MEMCOPY round %d\n",i);
++ paddr2 = kmalloc(0x4000,GFP_KERNEL);
++ raid_memcpy(paddr2,paddr1,0x4000);
++ kfree(paddr2);
++ }
++ kfree(paddr1);
++
++ // memset test
++ for(i=0;i<TEST_ITERATION;i++) {
++ raid_memset(paddr1,0xFFFFFFFF,0x4000);
++ res = readl(0xf62000ac);
++ printk("MEMFILL fill 0x%x round %d\n",res,i);
++ paddr1 = kmalloc(0x4000,GFP_KERNEL);
++ raid_memset(paddr1,res,0x4000);
++ raid_memset(paddr1,0x0,0x4000);
++ kfree(paddr1);
++ }
++
++ paddr1 = kmalloc(0x4000,GFP_KERNEL);
++ for(i=0;i<TEST_ITERATION;i++){
++ raid_memset(paddr1, i,0x4000);
++ printk("Pattern check same ? ");
++ res = raid_memchk(paddr1, i,0x4000);
++ printk("%s\n",res?"Fail":"OK");
++ if(res) while(1);
++
++ printk("Pattern check diff ? ");
++ res = raid_memchk(paddr1,readl(0xf62000ac),0x4000);
++ printk("%s\n",res?"OK":"Fail");
++ if(!res) while(1);
++ }
++ kfree(paddr1);
++
++ // SRAM test
++ raid_write_reg(RAID_PCR, 0,0x00000003);
++ for(i=0;i<TEST_ITERATION;i++) {
++ printk("SRAM test %d\n",i);
++ charact = 0xF7000000;
++ two_char = 0xF7000000;
++ four_char = 0xF7000000;
++ for(res=0;res<(16*1024)/sizeof(char);res++) { // 8-bit access
++ *charact++ = (unsigned char)res;
++ }
++ charact = 0xF7000000;
++ for(res=0;res<(16*1024)/sizeof(char);res++) {
++ if(*charact++ != (unsigned char)res){
++ printk("SRAM data error(8)\n");
++ while(1);
++ }
++ }
++
++ for(res=0;res<(16*1024)/sizeof(short);res++) { // 16-bit access
++ *two_char++ = (unsigned short)res;
++ }
++ two_char = 0xF7000000;
++ for(res=0;res<(16*1024)/sizeof(short);res++) {
++ if(*two_char++ != (unsigned short)res){
++ printk("SRAM data error(16)\n");
++ while(1);
++ }
++ }
++
++ for(res=0;res<(16*1024)/sizeof(int);res++) { // 32-bit access
++ *four_char++ = (unsigned int)res;
++ }
++ four_char = 0xF7000000;
++ for(res=0;res<(16*1024)/sizeof(int);res++) {
++ if(*four_char++ != (unsigned int)res){
++ printk("SRAM data error(32)\n");
++ while(1);
++ }
++ }
++ }
++ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003);
++
++#endif
++ return 0;
++}
++
++void __exit gemini_xor_exit(void)
++{
++ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.tx_desc_dma);
++ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.rx_desc_dma);
++ free_irq(IRQ_RAID, NULL);
++}
++
++
++static int gemini_xor_init_desc(void)
++{
++ unsigned int i;
++ dma_addr_t tx_first_desc_dma;
++ dma_addr_t rx_first_desc_dma;
++ RAID_DMA_STATUS_T dma_status;
++
++ printk("Initial RAID Descripter...\n");
++
++ tp.tx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.tx_desc_dma);
++ tx_desc_virtual_base = (unsigned int)tp.tx_desc - (unsigned int)tp.tx_desc_dma;
++ memset(tp.tx_desc,0x00,TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T));
++
++ tp.rx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.rx_desc_dma);
++ rx_desc_virtual_base = (unsigned int)tp.rx_desc - (unsigned int)tp.rx_desc_dma;
++ memset(tp.rx_desc,0x00,RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T));
++ printk("XOR:tx_desc = %08x\n",(unsigned int)tp.tx_desc);
++ printk("XOR:rx_desc = %08x\n",(unsigned int)tp.rx_desc);
++ printk("XOR:tx_desc_dma = %08x\n",(unsigned int)tp.tx_desc_dma);
++ printk("XOR:rx_desc_dma = %08x\n",(unsigned int)tp.rx_desc_dma);
++
++ if ((tp.tx_desc == NULL) || (tp.rx_desc == NULL)) {
++ if (tp.tx_desc)
++ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.tx_desc_dma);
++ if (tp.rx_desc)
++ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.rx_desc_dma);
++ return -ENOMEM;
++ }
++
++ tp.tx_cur_desc = tp.tx_desc; /* virtual address */
++ tp.tx_finished_desc = tp.tx_desc; /* virtual address */
++ tx_first_desc_dma = (dma_addr_t)tp.tx_desc_dma; /* physical address */
++ for (i = 1; i < TX_DESC_NUM; i++) {
++ tp.tx_desc->func_ctrl.bits.own = CPU;
++ tp.tx_desc->func_ctrl.bits.buffer_size = 0;
++ tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
++// tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B;
++ tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10;
++ tp.tx_desc = &tp.tx_desc[1];
++ }
++ tp.tx_desc->func_ctrl.bits.own = DMA;
++ tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b;
++ tp.tx_desc = tp.tx_cur_desc;
++ tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma;
++ tp.tx_first_desc = tp.tx_desc ;
++
++ tp.rx_cur_desc = tp.rx_desc; /* virtual address */
++ tp.rx_finished_desc = tp.rx_desc; /* virtual address */
++ rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */
++ for (i = 1; i < RX_DESC_NUM; i++) {
++ tp.rx_desc->func_ctrl.bits.own = DMA;
++ tp.rx_desc->func_ctrl.bits.buffer_size = 0;
++ tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
++// tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B;
++ tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10;
++ tp.rx_desc = &tp.rx_desc[1];
++ }
++ tp.rx_desc->func_ctrl.bits.own = DMA;
++ tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b;
++ tp.rx_desc = tp.rx_cur_desc;
++ tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma;
++ tp.rx_first_desc = tp.rx_desc ;
++ tp.busy = 0;
++ tp.status = COMPLETE;
++
++ // Partition SRAM size
++ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003);
++
++ // config tx DMA controler
++ txdma_ctrl.bits32 = 0;
++ txdma_ctrl.bits.td_start = 0;
++ txdma_ctrl.bits.td_continue = 1;
++ txdma_ctrl.bits.td_chain_mode = 1;
++ txdma_ctrl.bits.td_prot = 0;
++ txdma_ctrl.bits.td_burst_size = 1;
++ txdma_ctrl.bits.td_bus = 3;
++ txdma_ctrl.bits.td_endian = 0;
++ txdma_ctrl.bits.td_finish_en = 1;
++ txdma_ctrl.bits.td_fail_en = 1;
++ txdma_ctrl.bits.td_perr_en = 1;
++ txdma_ctrl.bits.td_eod_en = 0; // enable tx descript
++ txdma_ctrl.bits.td_eof_en = 0;
++ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF);
++
++ // config rx DMA controler
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 0;
++ rxdma_ctrl.bits.rd_continue = 1;
++ rxdma_ctrl.bits.rd_chain_mode = 1;
++ rxdma_ctrl.bits.rd_prot = 0;
++ rxdma_ctrl.bits.rd_burst_size = 1;
++ rxdma_ctrl.bits.rd_bus = 3;
++ rxdma_ctrl.bits.rd_endian = 0;
++ rxdma_ctrl.bits.rd_finish_en = 0;
++ rxdma_ctrl.bits.rd_fail_en = 1;
++ rxdma_ctrl.bits.rd_perr_en = 1;
++ rxdma_ctrl.bits.rd_eod_en = 0;
++ rxdma_ctrl.bits.rd_eof_en = 0;
++ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF);
++
++ // enable interrupt
++ dma_status.bits32 = 3; // enable RpInt
++ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF);
++
++ return 0;
++}
++
++module_init(gemini_xor_init);
++module_exit(gemini_xor_exit);
++
+Index: linux-2.6.23.16/arch/arm/mm/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/mm/Kconfig 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/mm/Kconfig 2008-03-13 17:48:24.508798285 +0200
+@@ -187,6 +187,26 @@
+ Say Y if you want support for the ARM926T processor.
+ Otherwise, say N.
+
++###### for Storlink SoC ######
++config CPU_FA526
++ bool "FA526 processor"
++ depends on ARCH_SL2312
++ default y
++ select CPU_32v4
++ select CPU_ABRT_EV4
++ select CPU_CACHE_FA
++ select CPU_CACHE_VIVT
++ select CPU_CP15_MMU
++ select CPU_COPY_FA
++ select CPU_TLB_FA
++ select CPU_FA_BTB
++ help
++ The FA526 is a version of the ARM9 compatible processor, but with smaller
++ instruction and data caches. It is used in Storlink Sword device family.
++
++ Say Y if you want support for the FA526 processor.
++ Otherwise, say N.
++
+ # ARM940T
+ config CPU_ARM940T
+ bool "Support ARM940T processor" if ARCH_INTEGRATOR
+@@ -461,6 +481,9 @@
+ config CPU_CACHE_VIPT
+ bool
+
++config CPU_CACHE_FA
++ bool
++
+ if MMU
+ # The copy-page model
+ config CPU_COPY_V3
+@@ -475,6 +498,12 @@
+ config CPU_COPY_V6
+ bool
+
++config CPU_COPY_FA
++ bool
++
++config CPU_FA_BTB
++ bool
++
+ # This selects the TLB model
+ config CPU_TLB_V3
+ bool
+@@ -534,6 +563,14 @@
+ config IO_36
+ bool
+
++config CPU_TLB_FA
++ bool
++ help
++ //TODO
++ Faraday ARM FA526 architecture, unified TLB with writeback cache
++ and invalidate instruction cache entry. Branch target buffer is also
++ supported.
++
+ comment "Processor Features"
+
+ config ARM_THUMB
+@@ -600,7 +637,7 @@
+
+ config CPU_DCACHE_WRITETHROUGH
+ bool "Force write through D-cache"
+- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
++ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
+ default y if CPU_ARM925T
+ help
+ Say Y here to use the data cache in writethrough mode. Unless you
+Index: linux-2.6.23.16/arch/arm/mm/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/mm/Makefile 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/mm/Makefile 2008-03-13 17:48:24.508798285 +0200
+@@ -32,6 +32,7 @@
+ obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
+ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
+ obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
++obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
+
+ obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
+ obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
+@@ -40,6 +41,7 @@
+ obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
+ obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
+ obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
++obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
+
+ obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
+ obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
+@@ -47,6 +49,7 @@
+ obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
+ obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
+ obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
++obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
+
+ obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
+ obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
+@@ -60,6 +63,7 @@
+ obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
+ obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
+ obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
++obj-$(CONFIG_CPU_FA526) += proc-fa526.o
+ obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
+ obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
+ obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
+Index: linux-2.6.23.16/arch/arm/mm/cache-fa.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mm/cache-fa.S 2008-03-13 18:01:19.552965535 +0200
+@@ -0,0 +1,400 @@
++/*
++ * linux/arch/arm/mm/cache-fa.S
++ *
++ * Copyright (C) 2005 Faraday Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * Processors: FA520 FA526 FA626
++ * 03/31/2005 : Luke Lee created, modified from cache-v4wb.S
++ * 04/06/2005 : 1. Read CR0-1 and determine the cache size dynamically,
++ * to suit all Faraday CPU series
++ * 2. Fixed all functions
++ * 04/08/2005 : insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE
++ * 04/12/2005 : TODO: make this processor dependent or a self-modifying code to
++ * inline cache len/size info into the instructions, as reading cache
++ * size and len info in memory could cause another cache miss.
++ * 05/05/2005 : Modify fa_flush_user_cache_range to comply APCS.
++ * 05/19/2005 : Adjust for boundary conditions.
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <asm/hardware.h>
++#include <asm/page.h>
++#include "proc-macros.S"
++
++#define CACHE_DLINESIZE 16
++#ifdef CONFIG_SL3516_ASIC
++#define CACHE_DSIZE 8192
++#else
++#define CACHE_DSIZE 16384
++#endif
++#define CACHE_ILINESIZE 16
++#define CACHE_ISIZE 16384
++
++/* Luke Lee 04/06/2005 ins begin */
++/*
++ * initialize_cache_info()
++ *
++ * Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to
++ * system register CR0-1
++ * Destroyed register: r0, r1, r2, r3, ip
++ */
++ .align
++ENTRY(fa_initialize_cache_info)
++ mov r3, #1 @ r3 always = 1
++ adr ip, __fa_cache_ilen
++
++ mrc p15, 0, r0, c0, c0, 1
++ /* ILEN */
++ and r1, r0, #3 @ bits [1:0]
++ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3)
++ mov r2, r3, lsl r1 @ r2 = 1<<r1
++ str r2, [ip], #4
++ /* ISIZE */
++ mov r1, r0, lsr #6 @ bits [8:6]
++ and r1, r1, #7
++ add r1, r1, #9 @ cache size is at least 512 bytes (2^9)
++ mov r2, r3, lsl r1
++ str r2, [ip], #4
++ /* DLEN */
++ mov r1, r0, lsr #12
++ and r1, r1, #3 @ bits [13:12]
++ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3)
++ mov r2, r3, lsl r1 @ r2 = 1<<r1
++ str r2, [ip], #4
++ /* DSIZE */
++ mov r1, r0, lsr #18 @ bits [20:18]
++ and r1, r1, #7
++ add r1, r1, #9 @ cache size is at least 512 bytes (2^9)
++ mov r2, r3, lsl r1
++ str r2, [ip]
++ mov pc, lr
++
++ /* Warning : Do not change the order ! Successive codes depends on this */
++ .align
++ .globl __fa_cache_ilen, __fa_cache_isize, __fa_cache_dlen, __fa_cache_dsize
++__fa_cache_ilen:
++ .word 0 @ instruction cache line length
++__fa_cache_isize:
++ .word 0 @ instruction cache size
++__fa_cache_dlen:
++ .word 0 @ data cahce line length
++__fa_cache_dsize:
++ .word 0 @ data cache size
++
++/* Luke Lee 04/06/2005 ins end */
++
++/*
++ * flush_user_cache_all()
++ *
++ * Clean and invalidate all cache entries in a particular address
++ * space.
++ */
++ENTRY(fa_flush_user_cache_all)
++ /* FALLTHROUGH */
++/*
++ * flush_kern_cache_all()
++ *
++ * Clean and invalidate the entire cache.
++ */
++ENTRY(fa_flush_kern_cache_all)
++/* Luke Lee 04/06/2005 mod ok */
++ mov ip, #0
++
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
++#endif
++
++__flush_whole_cache:
++
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++ mov ip, #0
++# ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
++# else
++ mcr p15, 0, ip, c7,c14, 0 @ clean/invalidate D cache
++# endif
++#endif /*CONFIG_CPU_DCACHE_DISABLE*/
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
++#endif
++
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++
++/* Luke Lee 04/06/2005 que todo tofix : should iscratchpad and dscratchpad be invalidated ? */
++ mov pc, lr
++
++/*
++ * flush_user_cache_range(start, end, flags)
++ *
++ * Invalidate a range of cache entries in the specified
++ * address space.
++ *
++ * - start - start address (inclusive, page aligned)
++ * - end - end address (exclusive, page aligned)
++ * - flags - vma_area_struct flags describing address space
++ */
++ENTRY(fa_flush_user_cache_range)
++
++/* Luke Lee 04/06/2005 mod ok */
++ /* Luke Lee 04/07/2005 ins 1 */
++ mov ip, #0
++ sub r3, r1, r0 @ calculate total size
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ tst r2, #VM_EXEC @ executable region?
++ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
++#endif
++
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++ /* Luke Lee 04/06/2005 ins 2 mod 1 */
++ cmp r3, #CACHE_DSIZE @ total size >= limit?
++ bhs __flush_whole_cache @ flush whole D cache
++
++ //debug_Aaron
++ bic r0, r0, #CACHE_DLINESIZE-1
++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry
++ bic r1, r1, #CACHE_DLINESIZE-1
++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry
++
++
++1: /* Luke Lee 04/06/2005 del 2 ins 5 */
++
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
++#else
++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
++#endif
++ /* Luke Lee 04/06/2005 mod 1 */
++ add r0, r0, #CACHE_DLINESIZE
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005
++#endif /* CONFIG_CPU_DCACHE_DISABLE */
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ tst r2, #VM_EXEC
++ /* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */
++ mcreq p15, 0, r4, c7, c10, 4 @ drain write buffer
++#endif
++
++ /* Luke Lee 04/06/2005 ins block */
++#ifdef CONFIG_CPU_FA_BTB
++ tst r2, #VM_EXEC
++ mov ip, #0
++ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++ mov pc, lr
++
++/*
++ * flush_kern_dcache_page(void *page)
++ *
++ * Ensure no D cache aliasing occurs, either with itself or
++ * the I cache
++ *
++ * - addr - page aligned address
++ */
++ENTRY(fa_flush_kern_dcache_page)
++ add r1, r0, #PAGE_SZ
++ /* fall through */
++
++/*
++ * coherent_kern_range(start, end)
++ *
++ * Ensure coherency between the Icache and the Dcache in the
++ * region described by start. If you have non-snooping
++ * Harvard caches, you need to implement this function.
++ *
++ * - start - virtual start address
++ * - end - virtual end address
++ */
++ENTRY(fa_coherent_kern_range)
++ /* fall through */
++
++/*
++ * coherent_user_range(start, end)
++ *
++ * Ensure coherency between the Icache and the Dcache in the
++ * region described by start. If you have non-snooping
++ * Harvard caches, you need to implement this function.
++ *
++ * - start - virtual start address
++ * - end - virtual end address
++ */
++ENTRY(fa_coherent_user_range)
++
++/* Luke Lee 04/06/2005 mod ok */
++ /* Luke Lee 04/06/2005 ins 3 mod 1 */
++ bic r0, r0, #CACHE_DLINESIZE-1
++
++ //debug_Aaron
++ bic r0, r0, #CACHE_DLINESIZE-1
++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry
++ bic r1, r1, #CACHE_DLINESIZE-1
++ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry
++
++#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE))
++1: /* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
++#else
++ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
++#endif
++#endif /* CONFIG_CPU_DCACHE_DISABLE */
++
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
++#endif
++ add r0, r0, #CACHE_DLINESIZE
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005 blo->bls
++#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */
++
++ mov ip, #0
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++
++/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, ip, c7, c10, 4 @ drain WB
++#endif
++
++ mov pc, lr
++
++/*
++ * dma_inv_range(start, end)
++ *
++ * Invalidate (discard) the specified virtual address range.
++ * May not write back any entries. If 'start' or 'end'
++ * are not cache line aligned, those lines must be written
++ * back.
++ *
++ * - start - virtual start address
++ * - end - virtual end address
++ */
++ENTRY(fa_dma_inv_range)
++
++/* Luke Lee 04/06/2005 mod ok */
++
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++
++ //debug_Aaron
++ bic r0, r0, #CACHE_DLINESIZE-1
++ mcr p15, 0, r0, c7, c6, 1 @ invalidate boundary D entry
++ bic r1, r1, #CACHE_DLINESIZE-1
++ mcr p15, 0, r1, c7, c6, 1 @ invalidate boundary D entry
++
++ /* Luke Lee 04/06/2005 ins 4 mod 2 */
++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
++ tst r0, #CACHE_DLINESIZE -1
++ bic r0, r0, #CACHE_DLINESIZE -1
++
++//debug_Aaron
++ //mcrne p15, 0, r0, c7, c10, 1 @ clean boundary D entry
++
++ /* Luke Lee 04/06/2005 mod 1 */
++ /* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */
++ ////tst r1, #CACHE_DLINESIZE -1
++ //mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry
++ /* Luke Lee 04/06/2005 ins 1 */
++#else
++ bic r0, r0, #CACHE_DLINESIZE -1
++#endif
++
++//debug_Aaron
++1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
++//1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
++
++ /* Luke Lee 04/06/2005 mod 1 */
++ add r0, r0, #CACHE_DLINESIZE
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005 blo->bls
++#endif /* CONFIG_CPU_DCACHE_DISABLE */
++
++ /* Luke Lee 04/06/2005 ins 1 */
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mov r0, #0
++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
++#endif
++
++ mov pc, lr
++
++/*
++ * dma_clean_range(start, end)
++ *
++ * Clean (write back) the specified virtual address range.
++ *
++ * - start - virtual start address
++ * - end - virtual end address
++ */
++ENTRY(fa_dma_clean_range)
++
++/* Luke Lee 04/06/2005 mod ok */
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++
++ //debug_Aaron
++ bic r0, r0, #CACHE_DLINESIZE-1
++ mcr p15, 0, r0, c7, c10, 1 @ clean boundary D entry
++ bic r1, r1, #CACHE_DLINESIZE-1
++ mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry
++
++ /* Luke Lee 04/06/2005 ins 4 mod 2 */
++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
++ bic r0, r0, #CACHE_DLINESIZE - 1
++
++//debug_Aaron
++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
++//1: mcr p15, 0, r0, c7, c14, 1 @ clean D entry
++ add r0, r0, #CACHE_DLINESIZE
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005 blo->bls
++ /* Luke Lee 04/06/2005 ins 2 */
++#endif
++#endif /* CONFIG_CPU_DCACHE_DISABLE */
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mov r0, #0
++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
++#endif
++
++ mov pc, lr
++
++/*
++ * dma_flush_range(start, end)
++ *
++ * Clean and invalidate the specified virtual address range.
++ *
++ * - start - virtual start address
++ * - end - virtual end address
++ *
++ * This is actually the same as fa_coherent_kern_range()
++ */
++ .globl fa_dma_flush_range
++ .set fa_dma_flush_range, fa_coherent_kern_range
++
++ __INITDATA
++
++ .type fa_cache_fns, #object
++ENTRY(fa_cache_fns)
++ .long fa_flush_kern_cache_all
++ .long fa_flush_user_cache_all
++ .long fa_flush_user_cache_range
++ .long fa_coherent_kern_range
++ .long fa_coherent_user_range
++ .long fa_flush_kern_dcache_page
++ .long fa_dma_inv_range
++ .long fa_dma_clean_range
++ .long fa_dma_flush_range
++ .size fa_cache_fns, . - fa_cache_fns
+Index: linux-2.6.23.16/arch/arm/mm/copypage-fa.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mm/copypage-fa.S 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,106 @@
++/*
++ * linux/arch/arm/lib/copypage-fa.S
++ *
++ * Copyright (C) 2005 Faraday Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * ASM optimised string functions
++ * 05/18/2005 : Luke Lee created, modified from copypage-v4wb.S
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <asm/asm-offsets.h>
++
++ .text
++/*
++ * ARMv4 optimised copy_user_page for Faraday processors
++ *
++ * We flush the destination cache lines just before we write the data into the
++ * corresponding address. Since the Dcache is read-allocate, this removes the
++ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
++ * and merged as appropriate.
++ *
++ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
++ * instruction. If your processor does not supply this, you have to write your
++ * own copy_user_page that does the right thing.
++ *
++ * copy_user_page(to,from,vaddr)
++ */
++ .align 4
++ENTRY(fa_copy_user_page)
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ /* Write through */
++ stmfd sp!, {r4, lr} @ 2
++ mov r2, #PAGE_SZ/32 @ 1
++
++ ldmia r1!, {r3, r4, ip, lr} @ 4
++1: stmia r0!, {r3, r4, ip, lr} @ 4
++ ldmia r1!, {r3, r4, ip, lr} @ 4+1
++ subs r2, r2, #1 @ 1
++ stmia r0!, {r3, r4, ip, lr} @ 4
++ ldmneia r1!, {r3, r4, ip, lr} @ 4
++ bne 1b @ 1
++
++ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
++ ldmfd sp!, {r4, pc} @ 3
++#else
++ /* Write back */
++ stmfd sp!, {r4, lr} @ 2
++ mov r2, #PAGE_SZ/32 @ 1
++
++1: ldmia r1!, {r3, r4, ip, lr} @ 4
++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
++ stmia r0!, {r3, r4, ip, lr} @ 4
++ ldmia r1!, {r3, r4, ip, lr} @ 4
++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
++ stmia r0!, {r3, r4, ip, lr} @ 4
++ subs r2, r2, #1 @ 1
++ bne 1b
++ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB
++ ldmfd sp!, {r4, pc} @ 3
++#endif
++
++/*
++ * ARMv4 optimised clear_user_page
++ *
++ * Same story as above.
++ */
++ .align 4
++ENTRY(fa_clear_user_page)
++ str lr, [sp, #-4]!
++ mov r1, #PAGE_SZ/32 @ 1
++ mov r2, #0 @ 1
++ mov r3, #0 @ 1
++ mov ip, #0 @ 1
++ mov lr, #0 @ 1
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ /* Write through */
++1: stmia r0!, {r2, r3, ip, lr} @ 4
++ stmia r0!, {r2, r3, ip, lr} @ 4
++ subs r1, r1, #1 @ 1
++ bne 1b @ 1
++
++ mcr p15, 0, r1, c7, c7, 0 @ flush ID cache
++ ldr pc, [sp], #4
++#else
++ /* Write back */
++1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
++ stmia r0!, {r2, r3, ip, lr} @ 4
++ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
++ stmia r0!, {r2, r3, ip, lr} @ 4
++ subs r1, r1, #1 @ 1
++ bne 1b @ 1
++ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
++ ldr pc, [sp], #4
++#endif
++
++ __INITDATA
++
++ .type fa_user_fns, #object
++ENTRY(fa_user_fns)
++ .long fa_clear_user_page
++ .long fa_copy_user_page
++ .size fa_user_fns, . - fa_user_fns
+Index: linux-2.6.23.16/arch/arm/mm/init.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/mm/init.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/mm/init.c 2008-03-13 17:48:24.508798285 +0200
+@@ -23,6 +23,7 @@
+
+ #include <asm/mach/arch.h>
+ #include <asm/mach/map.h>
++#include <asm/arch/ipi.h>
+
+ #include "mm.h"
+
+@@ -252,6 +253,11 @@
+ initrd_end = initrd_start + phys_initrd_size;
+ }
+ #endif
++#ifdef CONFIG_GEMINI_IPI
++ printk("CPU ID:%d\n",getcpuid());
++// reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000); //CPU0 space
++// reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE); //share memory
++#endif
+
+ /*
+ * Finally, reserve any node zero regions.
+Index: linux-2.6.23.16/arch/arm/mm/proc-fa526.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mm/proc-fa526.S 2008-03-14 14:59:46.823166907 +0200
+@@ -0,0 +1,407 @@
++/*
++ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
++ *
++ * Copyright (C) 2005 Faraday Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ *
++ * These are the low level assembler for performing cache and TLB
++ * functions on the fa526.
++ *
++ * Written by : Luke Lee
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <asm/assembler.h>
++#include <asm/pgtable.h>
++#include <asm/pgtable-hwdef.h>
++#include <asm/elf.h>
++#include <asm/hardware.h>
++#include <asm/page.h>
++#include <asm/ptrace.h>
++#include <asm/system.h>
++#include "proc-macros.S"
++
++#define CACHE_DLINESIZE 16
++
++ .text
++/*
++ * cpu_fa526_proc_init()
++ */
++ENTRY(cpu_fa526_proc_init)
++ /* MMU is already ON here, ICACHE, DCACHE conditionally disabled */
++
++ mov r0, #1
++ nop
++ nop
++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
++ nop
++ nop
++
++ mrc p15, 0, r0, c1, c0, 0 @ read ctrl register
++
++#ifdef CONFIG_CPU_FA_BTB
++ orr r0, r0, #CR_Z
++#else
++ bic r0, r0, #CR_Z
++#endif
++#ifdef CONFIG_CPU_FA_WB_DISABLE
++ mov r1, #0
++ mcr p15, 0, r1, c7, c10, 4 @ drain write buffer
++ nop
++ nop
++ bic r0, r0, #CR_W
++#else
++ orr r0, r0, #CR_W
++#endif
++#ifdef CONFIG_CPU_DCACHE_DISABLE
++ bic r0, r0, #CR_C
++#else
++ orr r0, r0, #CR_C
++#endif
++#ifdef CONFIG_CPU_ICACHE_DISABLE
++ bic r0, r0, #CR_I
++#else
++ orr r0, r0, #CR_I
++#endif
++
++ nop
++ nop
++ mcr p15, 0, r0, c1, c0, 0
++ nop
++ nop
++
++ mov r5, lr
++ bl fa_initialize_cache_info @ destroy r0~r4
++ mov pc, r5 @ return
++
++
++/*
++ * cpu_fa526_proc_fin()
++ */
++ENTRY(cpu_fa526_proc_fin)
++ stmfd sp!, {lr}
++ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
++ msr cpsr_c, ip
++
++ bl fa_flush_kern_cache_all
++ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
++ bic r0, r0, #0x1000 @ ...i............
++ bic r0, r0, #0x000e @ ............wca.
++ mcr p15, 0, r0, c1, c0, 0 @ disable caches
++
++ nop
++ nop
++ ldmfd sp!, {pc}
++
++/*
++ * cpu_fa526_reset(loc)
++ *
++ * Perform a soft reset of the system. Put the CPU into the
++ * same state as it would be if it had been reset, and branch
++ * to what would be the reset vector.
++ *
++ * loc: location to jump to for soft reset
++ */
++ .align 4
++ENTRY(cpu_fa526_reset)
++ mov ip, #0
++ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, ip, c7, c10, 4 @ drain WB
++#endif
++ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
++ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
++ bic ip, ip, #0x000f @ ............wcam
++ bic ip, ip, #0x1100 @ ...i...s........
++
++ bic ip, ip, #0x0800 @ BTB off
++ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
++ nop
++ nop
++ mov pc, r0
++
++/*
++ * cpu_fa526_do_idle()
++ */
++ .align 4
++ENTRY(cpu_fa526_do_idle)
++
++#ifdef CONFIG_CPU_FA_IDLE
++ nop
++ nop
++ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt (IDLE mode)
++#endif
++ mov pc, lr
++
++
++ENTRY(cpu_fa526_dcache_clean_area)
++
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
++1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
++ add r0, r0, #CACHE_DLINESIZE
++ subs r1, r1, #CACHE_DLINESIZE
++ bhi 1b
++#endif
++#endif
++ mov pc, lr
++
++
++/* =============================== PageTable ============================== */
++
++/*
++ * cpu_fa526_switch_mm(pgd)
++ *
++ * Set the translation base pointer to be as described by pgd.
++ *
++ * pgd: new page tables
++ */
++ .align 4
++
++ .globl fault_address
++fault_address:
++ .long 0
++
++ENTRY(cpu_fa526_switch_mm)
++
++ mov ip, #0
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
++#else
++ mcr p15, 0, ip, c7, c14, 0 @ Clean and invalidate whole DCache
++#endif
++#endif /*CONFIG_CPU_DCACHE_DISABLE*/
++
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
++#endif
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, ip, c7, c10, 4 @ drain WB
++#endif
++
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
++ nop
++ nop
++#endif
++ bic r0, r0, #0xff @ clear bits [7:0]
++ bic r0, r0, #0x3f00 @ clear bits [13:8]
++ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
++ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
++ nop
++ nop
++ mov pc, lr
++
++/*
++ * cpu_fa526_set_pte_ext(ptep, pte, ext)
++ *
++ * Set a PTE and flush it out
++ */
++ .align 4
++ENTRY(cpu_fa526_set_pte_ext)
++ str r1, [r0], #-2048 @ linux version
++
++ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
++
++ bic r2, r1, #PTE_SMALL_AP_MASK
++ bic r2, r2, #PTE_TYPE_MASK
++ orr r2, r2, #PTE_TYPE_SMALL
++
++ tst r1, #L_PTE_USER @ User?
++ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
++
++ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
++ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
++
++ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
++ movne r2, #0
++
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ eor r3, r2, #0x0a @ C & small page? 1010
++ tst r3, #0x0b @ 1011
++ biceq r2, r2, #4
++#endif
++ str r2, [r0] @ hardware version
++
++ mov r2, #0
++ mcr p15, 0, r2, c7, c10, 0 @ clean D cache all
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, r2, c7, c10, 4 @ drain WB
++#endif
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, r2, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++ mov pc, lr
++
++ __INIT
++
++ .type __fa526_setup, #function
++__fa526_setup:
++ /* On return of this routine, r0 must carry correct flags for CFG register */
++ mov r0, #0
++ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
++ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
++ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
++
++ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
++
++ mov r0, #1
++ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
++
++ mrc p15, 0, r0, c9, c1, 0 @ DScratchpad
++ bic r0, r0, #1
++ mcr p15, 0, r0, c9, c1, 0
++ mrc p15, 0, r0, c9, c1, 1 @ IScratchpad
++ bic r0, r0, #1
++ mcr p15, 0, r0, c9, c1, 1
++
++ mov r0, #0
++ mcr p15, 0, r0, c1, c1, 0 @ turn-off ECR
++
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
++ nop
++ nop
++#endif
++
++ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
++ mcr p15, 0, r0, c3, c0 @ load domain access register
++
++ mrc p15, 0, r0, c1, c0 @ get control register v4
++ ldr r5, fa526_cr1_clear
++ bic r0, r0, r5
++ ldr r5, fa526_cr1_set
++ orr r0, r0, r5
++
++#ifdef CONFIG_CPU_FA_BTB
++ orr r0, r0, #CR_Z
++#else
++ bic r0, r0, #CR_Z
++#endif
++#ifdef CONFIG_CPU_FA_WB_DISABLE
++ mov r12, #0
++ mcr p15, 0, r12, c7, c10, 4 @ drain write buffer
++ nop
++ nop
++ bic r0, r0, #CR_W @ .... .... .... 1...
++#else
++ orr r0, r0, #CR_W
++#endif
++
++ mov pc, lr
++ .size __fa526_setup, . - __fa526_setup
++
++ /*
++ * .RVI ZFRS BLDP WCAM
++ * ..11 0001 .111 1101
++ *
++ */
++ .type fa526_cr1_clear, #object
++ .type fa526_cr1_set, #object
++fa526_cr1_clear:
++ .word 0x3f3f
++fa526_cr1_set:
++ .word 0x317D
++
++ __INITDATA
++
++/*
++ * Purpose : Function pointers used to access above functions - all calls
++ * come through these
++ */
++ .type fa526_processor_functions, #object
++fa526_processor_functions:
++ .word v4_early_abort
++ .word cpu_fa526_proc_init
++ .word cpu_fa526_proc_fin
++ .word cpu_fa526_reset
++ .word cpu_fa526_do_idle
++ .word cpu_fa526_dcache_clean_area
++ .word cpu_fa526_switch_mm
++ .word cpu_fa526_set_pte_ext
++ .size fa526_processor_functions, . - fa526_processor_functions
++
++ .section ".rodata"
++
++ .type cpu_arch_name, #object
++cpu_arch_name:
++ .asciz "armv4"
++ .size cpu_arch_name, . - cpu_arch_name
++
++ .type cpu_elf_name, #object
++cpu_elf_name:
++ .asciz "v4"
++ .size cpu_elf_name, . - cpu_elf_name
++
++ .type cpu_fa526_name, #object
++cpu_fa526_name:
++ .ascii "FA526"
++#ifndef CONFIG_CPU_ICACHE_DISABLE
++ .ascii "i"
++#endif
++#ifndef CONFIG_CPU_DCACHE_DISABLE
++ .ascii "d"
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++ .ascii "(wt)"
++#else
++ .ascii "(wb)"
++#endif
++#endif
++ .ascii "\0"
++ .size cpu_fa526_name, . - cpu_fa526_name
++
++ .align
++
++ .section ".proc.info.init", #alloc, #execinstr
++
++#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
++#define __PMD_SECT_BUFFERABLE 0
++#else
++#define __PMD_SECT_BUFFERABLE PMD_SECT_BUFFERABLE
++#endif
++
++ .type __fa526_proc_info,#object
++__fa526_proc_info:
++ .long 0x66015261
++ .long 0xff01fff1
++ .long PMD_TYPE_SECT | \
++ __PMD_SECT_BUFFERABLE | \
++ PMD_SECT_CACHEABLE | \
++ PMD_BIT4 | \
++ PMD_SECT_AP_WRITE | \
++ PMD_SECT_AP_READ
++ .long PMD_TYPE_SECT | \
++ PMD_BIT4 | \
++ PMD_SECT_AP_WRITE | \
++ PMD_SECT_AP_READ
++ b __fa526_setup
++ .long cpu_arch_name
++ .long cpu_elf_name
++ .long HWCAP_SWP | HWCAP_HALF
++ .long cpu_fa526_name
++ .long fa526_processor_functions
++ .long fa_tlb_fns
++ .long fa_user_fns
++ .long fa_cache_fns
++ .size __fa526_proc_info, . - __fa526_proc_info
++
++
+Index: linux-2.6.23.16/arch/arm/mm/tlb-fa.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/arch/arm/mm/tlb-fa.S 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,96 @@
++/*
++ * linux/arch/arm/mm/tlb-fa.S
++ *
++ * Copyright (C) 2005 Faraday Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * ARM architecture version 4, Faraday variation.
++ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
++ *
++ * Processors: FA520 FA526 FA626
++ * 03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S
++ * 05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated
++ * data cache entries when invalidating TLB entries.
++ */
++#include <linux/linkage.h>
++#include <linux/init.h>
++#include <asm/asm-offsets.h>
++#include <asm/tlbflush.h>
++#include "proc-macros.S"
++
++
++/*
++ * flush_user_tlb_range(start, end, mm)
++ *
++ * Invalidate a range of TLB entries in the specified address space.
++ *
++ * - start - range start address
++ * - end - range end address
++ * - mm - mm_struct describing address space
++ */
++ .align 4
++ENTRY(fa_flush_user_tlb_range)
++
++ vma_vm_mm ip, r2
++ act_mm r3 @ get current->active_mm
++ eors r3, ip, r3 @ == mm ?
++ movne pc, lr @ no, we dont do anything
++ mov r3, #0
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, r3, c7, c10, 4 @ drain WB
++#endif
++
++ vma_vm_flags r2, r2
++ bic r0, r0, #0x0ff
++ bic r0, r0, #0xf00
++
++1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
++ add r0, r0, #PAGE_SZ
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005 blo -> bls
++
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++ mov pc, lr
++
++
++ENTRY(fa_flush_kern_tlb_range)
++ mov r3, #0
++
++ mcr p15, 0, r3, c7, c10, 0 @ clean Dcache all 06/03/2005
++
++#ifndef CONFIG_CPU_FA_WB_DISABLE
++ mcr p15, 0, r3, c7, c10, 4 @ drain WB
++#endif
++
++ bic r0, r0, #0x0ff
++ bic r0, r0, #0xf00
++1:
++ mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
++ add r0, r0, #PAGE_SZ
++ cmp r0, r1
++ bls 1b @ Luke Lee 05/19/2005 blo -> bls
++
++#ifdef CONFIG_CPU_FA_BTB
++ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
++ nop
++ nop
++#endif
++ mov pc, lr
++
++
++ __INITDATA
++
++ .type fa_tlb_fns, #object
++ENTRY(fa_tlb_fns)
++ .long fa_flush_user_tlb_range
++ .long fa_flush_kern_tlb_range
++ .long fa_tlb_flags
++ .size fa_tlb_fns, . - fa_tlb_fns
+Index: linux-2.6.23.16/arch/arm/tools/mach-types
+===================================================================
+--- linux-2.6.23.16.orig/arch/arm/tools/mach-types 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/arch/arm/tools/mach-types 2008-03-13 17:48:24.508798285 +0200
+@@ -208,7 +208,8 @@
+ fester SA1100_FESTER FESTER 191
+ gpi ARCH_GPI GPI 192
+ smdk2410 ARCH_SMDK2410 SMDK2410 193
+-i519 ARCH_I519 I519 194
++#i519 ARCH_I519 I519 194
++sl2312 ARCH_SL2312 SL2312 194
+ nexio SA1100_NEXIO NEXIO 195
+ bitbox SA1100_BITBOX BITBOX 196
+ g200 SA1100_G200 G200 197
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/SL_gpio.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/SL_gpio.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,59 @@
++#define GPIO_MINOR_LAST 31
++#define GPIO_MAJOR 120 // Experiemental
++
++#define GPIO_IRQ_NBR 12
++
++#define GPIOBASEADDR (IO_ADDRESS(0x021000000))
++
++#define GPIODATAOUTOFF 0x00
++#define GPIODATAINOFF 0x04
++#define GPIOPINDIROFF 0x08
++#define GPIOPINBYPASSOFF 0x0C
++#define GPIODATASETOFF 0x10
++#define GPIODATACLEAROFF 0x14
++#define GPIOPINPULLENBOFF 0x18
++#define GPIOPINPULLTPOFF 0x1C
++#define GPIOINTRENBOFF 0x20
++#define GPIOINTRRAWSOFF 0x24
++#define GPIOINTRMASKEDSTATEOFF 0x28
++#define GPIOINTRMASKOFF 0x2C
++#define GPIOINTRCLEAROFF 0x30
++#define GPIOINTRTRIGGEROFF 0x34
++#define GPIOINTRBOTHOFF 0x38
++#define GPIOINTRRISENEGOFF 0x3C
++#define GPIOBNCEENBOFF 0x40
++#define GPIOBNCEPRESOFF 0x44
++
++#define GPIO_IOCTRL_SETDIR 0x20
++#define GPIO_IOCTRL_SET 0x40
++#define GPIO_IOCTRL_CLEAR 0x50
++#define GPIO_IOCTRL_ENBINT 0x60
++#define GPIO_IOCTRL_MASKINT 0x70
++#define GPIO_IOCTRL_LVLTRIG 0x75
++#define GPIO_IOCTRL_EDGINT 0x77
++#define GPIO_IOCTRL_EDGPOLINT 0x78
++#define GPIO_IOCTRL_BYPASS 0x30
++#define GPIO_IOCTRL_PRESCLK 0x80
++#define GPIO_IOCTRL_CLKVAL 0x90
++#define GPIO_IOCTRL_PULLENB 0xA0
++#define GPIO_IOCTRL_PULLTYPE 0xA8
++
++
++#define GPIO_MAJOR 120 /* experimental MAJOR number */
++ // Minor - 0 : 31 gpio pins
++
++#define GPIO_SET 0x01
++#define GPIO_CLEAR 0x01
++
++#define GPIO_INPUT 0
++#define GPIO_OUTPUT 1
++#define GPIO_EDGEINTR 0
++#define GPIO_EDGESINGL 0
++#define GPIO_EDGEBOTH 1
++#define GPIO_POSITIVE 0
++#define GPIO_ENBINT 1
++#define GPIO_DISABLEMASK 1
++#define GPIO_PULLDOWN 0
++#define GPIO_PULLUP 1
++#define GPIO_ENABLEPULL 1
++#define GPIO_DISABLEPULL 0
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/debug-macro.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/debug-macro.S 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,20 @@
++/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
++ *
++ * Debugging macro include header
++ *
++ * Copyright (C) 1994-1999 Russell King
++ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++**/
++
++ .macro addruart,rx
++ mov \rx, #0x42000000
++ .endm
++
++#define UART_SHIFT 2
++#define FLOW_CONTROL
++#include <asm/hardware/debug-8250.S>
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/dma.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/dma.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,28 @@
++/*
++ * linux/include/asm-arm/arch-camelot/dma.h
++ *
++ * Copyright (C) 1997,1998 Russell King
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_DMA_H
++#define __ASM_ARCH_DMA_H
++
++#define MAX_DMA_ADDRESS 0xffffffff
++
++#define MAX_DMA_CHANNELS 0
++
++#endif /* _ASM_ARCH_DMA_H */
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/entry-macro.S
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/entry-macro.S 2008-03-13 17:49:18.511875745 +0200
+@@ -0,0 +1,42 @@
++/*
++ * include/asm-arm/arch-arm/entry-macro.S
++ *
++ * Low-level IRQ helper macros for ebsa110 platform.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++#include <asm/arch/platform.h>
++#include <asm/arch/int_ctrl.h>
++
++
++ .macro disable_fiq
++ .endm
++
++ .macro get_irqnr_preamble, base, tmp
++ .endm
++
++ .macro arch_ret_to_user, tmp1, tmp2
++ .endm
++
++ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
++ ldr \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE))
++ ldr \irqnr,[\irqstat]
++ cmp \irqnr,#0
++ beq 2313f
++ mov \tmp,\irqnr
++ mov \irqnr,#0
++2312:
++ tst \tmp, #1
++ bne 2313f
++ add \irqnr, \irqnr, #1
++ mov \tmp, \tmp, lsr #1
++ cmp \irqnr, #31
++ bcc 2312b
++2313:
++ .endm
++
++ .macro irq_prio_table
++ .endm
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/flash.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/flash.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,83 @@
++#ifndef __ASM_ARM_ARCH_FLASH_H
++#define __ASM_ARM_ARCH_FLASH_H
++
++#define FLASH_START SL2312_FLASH_BASE
++#define SFLASH_SIZE 0x00400000
++#define SPAGE_SIZE 0x200
++#define BLOCK_ERASE 0x50
++#define BUFFER1_READ 0x54
++#define BUFFER2_READ 0x56
++#define PAGE_ERASE 0x81
++#define MAIN_MEMORY_PAGE_READ 0x52
++#define MAIN_MEMORY_PROGRAM_BUFFER1 0x82
++#define MAIN_MEMORY_PROGRAM_BUFFER2 0x85
++#define BUFFER1_TO_MAIN_MEMORY 0x83
++#define BUFFER2_TO_MAIN_MEMORY 0x86
++#define MAIN_MEMORY_TO_BUFFER1 0x53
++#define MAIN_MEMORY_TO_BUFFER2 0x55
++#define BUFFER1_WRITE 0x84
++#define BUFFER2_WRITE 0x87
++#define AUTO_PAGE_REWRITE_BUFFER1 0x58
++#define AUTO_PAGE_REWRITE_BUFFER2 0x59
++#define READ_STATUS 0x57
++
++#define MAIN_MEMORY_PAGE_READ_SPI 0xD2
++#define BUFFER1_READ_SPI 0xD4
++#define BUFFER2_READ_SPI 0xD6
++#define READ_STATUS_SPI 0xD7
++
++#define FLASH_ACCESS_OFFSET 0x00000010
++#define FLASH_ADDRESS_OFFSET 0x00000014
++#define FLASH_WRITE_DATA_OFFSET 0x00000018
++#define FLASH_READ_DATA_OFFSET 0x00000018
++#define SERIAL_FLASH_CHIP1_EN 0x00010000 // 16th bit = 1
++#define SERIAL_FLASH_CHIP0_EN 0x00000000 // 16th bit = 0
++#define AT45DB321_PAGE_SHIFT 0xa
++#define AT45DB642_PAGE_SHIFT 0xb
++#define CONTINUOUS_MODE 0x00008000
++
++#define FLASH_ACCESS_ACTION_OPCODE 0x0000
++#define FLASH_ACCESS_ACTION_OPCODE_DATA 0x0100
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS 0x0200
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA 0x0300
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0400
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA 0x0500
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA 0x0600
++#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700
++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0600
++//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700
++
++#define M25P80_PAGE_SIZE 0x100
++#define M25P80_SECTOR_SIZE 0x10000
++
++
++//#define M25P80_BULK_ERASE 1
++//#define M25P80_SECTOR_ERASE 2
++//#define M25P80_SECTOR_SIZE 0x10000
++
++#define M25P80_WRITE_ENABLE 0x06
++#define M25P80_WRITE_DISABLE 0x04
++#define M25P80_READ_STATUS 0x05
++#define M25P80_WRITE_STATUS 0x01
++#define M25P80_READ 0x03
++#define M25P80_FAST_READ 0x0B
++#define M25P80_PAGE_PROGRAM 0x02
++#define M25P80_SECTOR_ERASE 0xD8
++#define M25P80_BULK_ERASE 0xC7
++#define FLASH_ERR_OK 0x0
++
++extern void address_to_page(__u32, __u16 *, __u16 *);
++extern void main_memory_page_read(__u8, __u16, __u16, __u8 *);
++extern void buffer_to_main_memory(__u8, __u16);
++extern void main_memory_to_buffer(__u8, __u16);
++extern void main_memory_page_program(__u8, __u16, __u16, __u8);
++extern void atmel_flash_read_page(__u32, __u8 *, __u32);
++extern void atmel_erase_page(__u8, __u16);
++extern void atmel_read_status(__u8, __u8 *);
++extern void atmel_flash_program_page(__u32, __u8 *, __u32);
++extern void atmel_buffer_write(__u8, __u16, __u8);
++extern void flash_delay(void);
++
++extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_cir.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_cir.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,102 @@
++#ifndef _ASM_ARCH_CIR_H
++#define _ASM_ARCH_CIR_H
++#include <linux/ioctl.h>
++
++#define VCR_KEY_POWER 0x613E609F
++#define TV1_KEY_POWER 0x40040100
++#define TV1_KEY_POWER_EXT 0xBCBD
++#define RC5_KER_POWER 0x0CF3
++
++#define VCC_H_ACT_PER (16-1)
++#define VCC_L_ACT_PER (8-1)
++#define VCC_DATA_LEN (32-1)
++#define TV1_H_ACT_PER (8-1)
++#define TV1_L_ACT_PER (4-1)
++#define TV1_DATA_LEN (48-1)
++
++#define VCC_BAUD 540
++#define TV1_BAUD 430
++#ifdef CONFIG_SL3516_ASIC
++#define EXT_CLK 60
++#else
++#define EXT_CLK 20
++#endif
++
++#define NEC_PROTOCOL 0x0
++#define RC5_PROTOCOL 0x1
++#define VCC_PROTOCOL 0x0
++#define TV1_PROTOCOL 0x01
++
++#ifndef SL2312_CIR_BASE
++#define SL2312_CIR_BASE 0x4C000000
++#endif
++#define CIR_BASE_ADDR IO_ADDRESS(SL2312_CIR_BASE)
++#define STORLINK_CIR_ID 0x00010400
++
++#define CIR_IP_ID *(volatile unsigned int *)(CIR_BASE_ADDR + 0x00)
++#define CIR_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x04)
++#define CIR_STATUS_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x08)
++#define CIR_RX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C)
++#define CIR_RX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x10)
++#define CIR_PWR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x14)
++#define CIR_PWR_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x18)
++#define CIR_TX_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C)
++#define CIR_TX_FEQ_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x20)
++#define CIR_TX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x24)
++#define CIR_TX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x28)
++
++
++#ifndef SL2312_POWER_CTRL_BASE
++#define SL2312_POWER_CTRL_BASE 0x4B000000
++#endif
++
++#ifndef PWR_BASE_ADDR
++#define PWR_BASE_ADDR IO_ADDRESS(SL2312_POWER_CTRL_BASE)
++#endif
++#define PWR_CTRL_ID *(unsigned int*)(PWR_BASE_ADDR+0x00)
++#define PWR_CTRL_REG *(unsigned int*)(PWR_BASE_ADDR+0x04)
++#define PWR_STATUS_REG *(unsigned int*)(PWR_BASE_ADDR+0x08)
++
++
++#define BIT(x) (1<<x)
++#define TX_STATUS BIT(3)
++
++#define PWR_STAT_CIR 0x10
++#define PWR_STAT_RTC 0x20
++#define PWR_STAT_PUSH 0x40
++#define PWR_SHUTDOWN 0x01
++
++#define CARR_FREQ 38000
++
++struct cir_ioctl_data {
++ __u32 data;
++};
++struct cir_ioctl_data48 {
++ __u32 timeout;
++ __u32 length;
++ __u8 ret;
++ __u32 data;
++ __u32 data_ext;
++};
++#define OLD_DATA 0
++#define NEW_RECEIVE 1
++
++#define CIR_IOCTL_BASE ('I'|'R')
++#define CIR_SET_BAUDRATE _IOW (CIR_IOCTL_BASE, 0, struct cir_ioctl_data)
++#define CIR_SET_HIGH_PERIOD _IOW (CIR_IOCTL_BASE, 1, struct cir_ioctl_data)
++#define CIR_SET_LOW_PERIOD _IOW (CIR_IOCTL_BASE, 2, struct cir_ioctl_data)
++#define CIR_SET_PROTOCOL _IOW (CIR_IOCTL_BASE, 3, struct cir_ioctl_data)
++#define CIR_SET_ENABLE_COMPARE _IOW (CIR_IOCTL_BASE, 4, struct cir_ioctl_data)
++#define CIR_SET_ENABLE_DEMOD _IOW (CIR_IOCTL_BASE, 5, struct cir_ioctl_data)
++#define CIR_SET_POWER_KEY _IOW (CIR_IOCTL_BASE, 6, struct cir_ioctl_data)
++#define CIR_GET_BAUDRATE _IOR (CIR_IOCTL_BASE, 7, struct cir_ioctl_data)
++#define CIR_GET_HIGH_PERIOD _IOR (CIR_IOCTL_BASE, 8 ,struct cir_ioctl_data)
++#define CIR_GET_LOW_PERIOD _IOR (CIR_IOCTL_BASE, 9 ,struct cir_ioctl_data)
++#define CIR_GET_PROTOCOL _IOR (CIR_IOCTL_BASE, 10, struct cir_ioctl_data)
++#define CIR_GET_ENABLE_COMPARE _IOR (CIR_IOCTL_BASE, 11, struct cir_ioctl_data)
++#define CIR_GET_ENABLE_DEMOD _IOR (CIR_IOCTL_BASE, 12, struct cir_ioctl_data)
++#define CIR_GET_POWER_KEY _IOR (CIR_IOCTL_BASE, 13, struct cir_ioctl_data)
++#define CIR_GET_DATA _IOWR (CIR_IOCTL_BASE, 14, struct cir_ioctl_data48)
++#define CIR_WAIT_INT_DATA _IOWR (CIR_IOCTL_BASE, 15, struct cir_ioctl_data48)
++
++#endif //_ASM_ARCH_CIR_H
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_gpio.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_gpio.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,77 @@
++/*
++ * FILE NAME gemini_gpio.h
++ *
++ * BRIEF MODULE DESCRIPTION
++ * Generic Gemini GPIO
++ *
++ * Author: Storlink Software [Device driver]
++ * Jason Lee <jason@storlink.com.tw>
++ *
++ * Copyright 2005 Storlink Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++
++#ifndef __GEMINI_GPIO_H
++#define __GEMINI_GPIO_H
++
++#include <linux/ioctl.h>
++
++#define STATUS_HIGH 1
++#define STATUS_LOW 0
++#define DIRECT_OUT 1
++#define DIRECT_IN 0
++
++#define EDGE_TRIG 0
++#define RISING_EDGE 0
++#define FALL_EDGE 1
++#define SINGLE_EDGE 0
++#define BOTH_EDGE 1
++
++#define LEVEL_TRIG 1
++#define HIGH_ACTIVE 0
++#define LOW_ACTIVE 1
++
++struct gemini_gpio_ioctl_data {
++ __u32 pin;
++ __u8 status; // status or pin direction
++ // 0: status low or Input
++ // 1: status high or Output
++
++ /* these member are used to config GPIO interrupt parameter */
++ __u8 use_default; // if not sure ,set this argument 1
++ __u8 trig_type; // 0/1:edge/level triger ?
++ __u8 trig_polar; // 0/1:rising/falling high/low active ?
++ __u8 trig_both; // 0/1:single/both detect both ?
++};
++
++#define GEMINI_GPIO_IOCTL_BASE 'Z'
++
++#define GEMINI_SET_GPIO_PIN_DIR _IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data)
++#define GEMINI_SET_GPIO_PIN_STATUS _IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data)
++#define GEMINI_GET_GPIO_PIN_STATUS _IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data)
++#define GEMINI_WAIT_GPIO_PIN_INT _IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data)
++
++
++extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both);
++extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both);
++extern int free_gpio_irq(int bit);
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_i2s.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_i2s.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,169 @@
++#ifndef __GEMINI_I2S_H__
++#define __GEMINI_I2S_H__
++#include <linux/ioctl.h>
++#include <linux/types.h>
++#include <asm/arch-sl2312/irqs.h>
++
++typedef __u16 UINT16;
++typedef __u32 UINT32;
++typedef __u8 UINT8;
++typedef __u8 BOOL;
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
++#define SSP_INT IRQ_SSP
++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++/* define read/write register utility */
++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE))
++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
++
++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR))
++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR))
++
++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1))
++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1))
++
++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE))
++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
++
++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE))
++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE))
++
++#define SSP_GPIO_INT IRQ_GPIO
++
++#ifndef CONFIG_SL3516_ASIC
++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin
++
++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */
++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */
++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/
++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/
++#define GPIO_MISO_BIT 9
++#else
++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin
++
++//#if 0
++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */
++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */
++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/
++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/
++//#define GPIO_MISO_BIT 29
++//#else
++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */
++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */
++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/
++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/
++//#define GPIO_MISO_BIT 7
++//#endif
++#endif
++
++
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0c,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++ GPIO_INT_ENABLE = 0x20,
++ GPIO_INT_RAWSTATE = 0x24,
++ GPIO_INT_MASKSTATE = 0x28,
++ GPIO_INT_MASK = 0x2C,
++ GPIO_INT_CLEAR = 0x30,
++ GPIO_INT_TRIGGER = 0x34,
++ GPIO_INT_BOTH = 0x38,
++ GPIO_INT_POLARITY = 0x3C
++};
++
++typedef struct
++{
++ UINT32 src_addr;
++ UINT32 dst_addr;
++ UINT32 llp;
++ UINT32 ctrl_size;
++ UINT32 owner;
++}DMA_LLP_t;
++
++typedef struct
++{
++ UINT32 owner;
++ UINT32 src_addr;
++ UINT32 ctrl_size;
++}IOCTL_LLP_t;
++
++typedef unsigned char byte;
++typedef unsigned short word;
++typedef unsigned long dword;
++
++/* DMA Registers */
++#define DMA_INT 0x00000000
++#define DMA_INT_TC 0x00000004
++#define DMA_CFG 0x00000024
++#define DMA_INT_TC_CLR 0x00000008
++#define DMA_TC 0x00000014
++#define DMA_CSR 0x00000024
++#define DMA_SYNC 0x00000028
++
++#define DMA_CH2_CSR 0x00000140
++#define DMA_CH2_CFG 0x00000144
++#define DMA_CH2_SRC_ADDR 0x00000148
++#define DMA_CH2_DST_ADDR 0x0000014c
++#define DMA_CH2_LLP 0x00000150
++#define DMA_CH2_SIZE 0x00000154
++
++#define DMA_CH3_CSR 0x00000160
++#define DMA_CH3_CFG 0x00000164
++#define DMA_CH3_SRC_ADDR 0x00000168
++#define DMA_CH3_DST_ADDR 0x0000016c
++#define DMA_CH3_LLP 0x00000170
++#define DMA_CH3_SIZE 0x00000174
++
++#define SSP_DEVICE_ID 0x00
++#define SSP_CTRL_STATUS 0x04
++#define SSP_FRAME_CTRL 0x08
++#define SSP_BAUD_RATE 0x0c
++#define SSP_FRAME_CTRL2 0x10
++#define SSP_FIFO_CTRL 0x14
++#define SSP_TX_SLOT_VALID0 0x18
++#define SSP_TX_SLOT_VALID1 0x1c
++#define SSP_TX_SLOT_VALID2 0x20
++#define SSP_TX_SLOT_VALID3 0x24
++#define SSP_RX_SLOT_VALID0 0x28
++#define SSP_RX_SLOT_VALID1 0x2c
++#define SSP_RX_SLOT_VALID2 0x30
++#define SSP_RX_SLOT_VALID3 0x34
++#define SSP_SLOT_SIZE0 0x38
++#define SSP_SLOT_SIZE1 0x3c
++#define SSP_SLOT_SIZE2 0x40
++#define SSP_SLOT_SIZE3 0x44
++#define SSP_READ_PORT 0x48
++#define SSP_WRITE_PORT 0x4c
++
++
++
++#define SSP_I2S_INIT_BUF _IO ('q', 0x00)
++#define SSP_I2S_STOP_DMA _IO ('q', 0x01)
++#define SSP_I2S_FILE_LEN _IOW ('q', 0x2, int)
++/*
++#define SSP_GET_HOOK_STATUS _IOR ('q', 0xC0, int)
++#define SSP_GET_LINEFEED _IOR ('q', 0xC1, int)
++#define SSP_SET_LINEFEED _IOW ('q', 0xC2, int)
++#define SSP_GET_REG _IOWR ('q', 0xC3, struct Ssp_reg *)
++#define SSP_SET_REG _IOWR ('q', 0xC4, struct Ssp_reg *)
++#define SSP_GEN_OFFHOOK_TONE _IO ('q', 0xC5)
++#define SSP_GEN_BUSY_TONE _IO ('q', 0xC6)
++#define SSP_GEN_RINGBACK_TONE _IO ('q', 0xC7)
++#define SSP_GEN_CONGESTION_TONE _IO ('q', 0xC8)
++#define SSP_DISABLE_DIALTONE _IO ('q', 0xC9)
++#define SSP_PHONE_RING_START _IO ('q', 0xCA)
++*/
++
++
++#endif //__GEMINI_I2S_H__
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_ssp.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/gemini_ssp.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,263 @@
++/******************************************************************************
++ * gemini_ssp.h
++ *
++ *
++ *****************************************************************************/
++
++#include <linux/types.h>
++#include <asm/arch-sl2312/irqs.h>
++#include <linux/phonedev.h>
++#include <linux/telephony.h>
++//#include "proslic.h"
++
++typedef __u16 UINT16;
++typedef __u32 UINT32;
++typedef __u8 UINT8;
++typedef __u8 BOOL;
++
++#define TRUE 1
++#define FALSE 0
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
++#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
++#define SSP_INT IRQ_SSP
++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
++#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++/* define read/write register utility */
++#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE))
++#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
++
++#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR))
++#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR))
++
++#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1))
++#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1))
++
++#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE))
++#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
++
++#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE))
++#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE))
++
++
++#define SSP_GPIO_INT IRQ_GPIO
++
++#ifndef CONFIG_SL3516_ASIC
++#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin
++
++#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */
++#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */
++#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/
++#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/
++#define GPIO_MISO_BIT 9
++#else
++#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin
++
++//#if 0
++//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */
++//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */
++//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/
++//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/
++//#define GPIO_MISO_BIT 29
++//#else
++//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */
++//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */
++//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/
++//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/
++//#define GPIO_MISO_BIT 7
++//#endif
++#endif
++
++
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0c,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++ GPIO_INT_ENABLE = 0x20,
++ GPIO_INT_RAWSTATE = 0x24,
++ GPIO_INT_MASKSTATE = 0x28,
++ GPIO_INT_MASK = 0x2C,
++ GPIO_INT_CLEAR = 0x30,
++ GPIO_INT_TRIGGER = 0x34,
++ GPIO_INT_BOTH = 0x38,
++ GPIO_INT_POLARITY = 0x3C
++};
++
++
++#define SPI_ADD_LEN 7 // bits of Address
++#define SPI_DAT_LEN 8 // bits of Data
++
++
++
++//#ifdef MIDWAY_DIAG
++#define DAISY_MODE 1
++#if (DAISY_MODE==1)
++#define NUMBER_OF_CHAN 2
++#else
++#define NUMBER_OF_CHAN 1
++#endif
++#define LLP_SIZE 8
++#define SBUF_SIZE 512 //0xff0 //2560
++#define DBUF_SIZE SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560
++#define TBUF_SIZE (LLP_SIZE)*DBUF_SIZE
++#define DESC_NUM 1
++#define DTMF_NUM 20
++
++/* define owner bit of SSP */
++//data into SSP and transfer to AP==> SSP_Rx
++//data out of SSP and transfer to SLIC==> SSP_Tx
++#define CPU 0
++#define DMA 1
++
++#define DMA_DEMO 0
++#define DMA_NDEMO 1
++//#define DMA_NONE 2
++
++enum exceptions {
++ PROSLICiNSANE,
++ TIMEoUTpOWERuP,
++ TIMEoUTpOWERdOWN,
++ POWERlEAK,
++ TIPoRrINGgROUNDsHORT,
++ POWERaLARMQ1,
++ POWERaLARMQ2,
++ POWERaLARMQ3,
++ POWERaLARMQ4,
++ POWERaLARMQ5,
++ OWERaLARMQ6,
++ CM_CAL_ERR
++};
++
++typedef struct
++{
++ UINT32 src_addr;
++ UINT32 dst_addr;
++ UINT32 llp;
++ UINT32 ctrl_size;
++}DMA_LLP_t;
++
++typedef struct {
++ unsigned int own ;
++ char *tbuf;
++ //UINT32 *LinkAddrT;
++ DMA_LLP_t LLPT[LLP_SIZE];
++}DMA_Tx_t;
++
++typedef struct {
++ unsigned int own ;
++ char *rbuf;
++ //UINT32 *LinkAddrR;
++ DMA_LLP_t LLPR[LLP_SIZE];
++}DMA_Rx_t;
++
++//typedef struct {
++// //UINT32 init_stat;
++// struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */
++// struct phone_device p;
++//
++//
++//}SSP_SLIC;
++
++
++
++/* DMA Registers */
++#define DMA_INT 0x00000000
++#define DMA_INT_TC 0x00000004
++#define DMA_CFG 0x00000024
++#define DMA_INT_TC_CLR 0x00000008
++#define DMA_TC 0x00000014
++#define DMA_CSR 0x00000024
++#define DMA_SYNC 0x00000028
++
++#define DMA_CH2_CSR 0x00000140
++#define DMA_CH2_CFG 0x00000144
++#define DMA_CH2_SRC_ADDR 0x00000148
++#define DMA_CH2_DST_ADDR 0x0000014c
++#define DMA_CH2_LLP 0x00000150
++#define DMA_CH2_SIZE 0x00000154
++
++#define DMA_CH3_CSR 0x00000160
++#define DMA_CH3_CFG 0x00000164
++#define DMA_CH3_SRC_ADDR 0x00000168
++#define DMA_CH3_DST_ADDR 0x0000016c
++#define DMA_CH3_LLP 0x00000170
++#define DMA_CH3_SIZE 0x00000174
++
++#define SSP_DEVICE_ID 0x00
++#define SSP_CTRL_STATUS 0x04
++#define SSP_FRAME_CTRL 0x08
++#define SSP_BAUD_RATE 0x0c
++#define SSP_FRAME_CTRL2 0x10
++#define SSP_FIFO_CTRL 0x14
++#define SSP_TX_SLOT_VALID0 0x18
++#define SSP_TX_SLOT_VALID1 0x1c
++#define SSP_TX_SLOT_VALID2 0x20
++#define SSP_TX_SLOT_VALID3 0x24
++#define SSP_RX_SLOT_VALID0 0x28
++#define SSP_RX_SLOT_VALID1 0x2c
++#define SSP_RX_SLOT_VALID2 0x30
++#define SSP_RX_SLOT_VALID3 0x34
++#define SSP_SLOT_SIZE0 0x38
++#define SSP_SLOT_SIZE1 0x3c
++#define SSP_SLOT_SIZE2 0x40
++#define SSP_SLOT_SIZE3 0x44
++#define SSP_READ_PORT 0x48
++#define SSP_WRITE_PORT 0x4c
++
++
++void printFreq_Revision(int num);
++void SLIC_SPI_write(int num, UINT8 ,UINT8);
++UINT8 SLIC_SPI_read(int num, UINT8);
++void SLIC_SPI_write_bit(char);
++void SLIC_SPI_ind_write(int num, UINT8, UINT16);
++UINT16 SLIC_SPI_ind_read(int num, UINT8);
++void SLIC_SPI_CS_enable(UINT8);
++unsigned int SLIC_SPI_read_bit(void);
++void SLIC_SPI_pre_st(void);
++UINT32 ssp_init(void);
++UINT16 SLIC_SPI_get_identifier(int num);
++int selfTest(int num);
++void exception (int num, enum exceptions e);
++int SLIC_init(int num);
++UINT8 version(int num);
++UINT8 chipType (int num);
++void SLIC_init_ind_reg_set(int num);
++UINT8 powerUp(int num);
++UINT8 powerLeakTest(int num);
++void SLIC_init_reg_set(int num);
++int calibrate(int num);
++void goActive(int num);
++void clearInterrupts(int num);
++void setState(int num, int);
++UINT8 loopStatus(int num);
++int verifyIndirectRegisters(int num);
++int verifyIndirectReg(int num, UINT8 , UINT16);
++void sendProSLICID(int num);
++void disableOscillators(int num);
++UINT8 checkSum(int num, char * string );
++void fskInitialization (int num);
++void fskByte(int num, UINT8 c);
++void waitForInterrupt (int num);
++//void findNumber(void);
++UINT8 dtmfAction(int num);
++UINT8 digit(int num);
++void interrupt_init(void);
++//void gemini_slic_isr (int );
++int groundShort(int num);
++void clearAlarmBits(int num);
++void stopRinging(int num);
++void activateRinging(int num);
++void initializeLoopDebounceReg(int num);
++void busyJapan(int num) ;
++void ringBackJapan(int num) ;
++void stateMachine(int num);
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/hardware.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/hardware.h 2008-03-14 12:48:02.872746442 +0200
+@@ -0,0 +1,47 @@
++/*
++ * linux/include/asm-arm/arch-epxa10/hardware.h
++ *
++ * This file contains the hardware definitions of the Integrator.
++ *
++ * Copyright (C) 1999 ARM Limited.
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_HARDWARE_H
++#define __ASM_ARCH_HARDWARE_H
++
++#include <asm/arch/platform.h>
++
++#define pcibios_assign_all_busses() 1
++
++/*
++ * Where in virtual memory the IO devices (timers, system controllers
++ * and so on)
++ *
++ * macro to get at IO space when running virtually
++*/
++
++#define IO_ADDRESS(x) (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000)
++#define FLASH_VBASE 0xFE000000
++#define FLASH_SIZE 0x1000000// 8M
++#define FLASH_START SL2312_FLASH_BASE
++#define FLASH_VADDR(x) ((x & 0x00ffffff)|0xFE000000) // flash virtual address
++
++#define PCIBIOS_MIN_IO 0x100 // 0x000-0x100 AHB reg and PCI config, data
++#define PCIBIOS_MIN_MEM 0
++
++#endif
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/int_ctrl.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/int_ctrl.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,171 @@
++/*
++ *
++ * This file contains the register definitions for the Excalibur
++ * Timer TIMER00.
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __INT_CTRL_H
++#define __INT_CTRL_H
++
++#define PCI_IRQ_OFFSET 64 /* PCI start IRQ number */
++#define FIQ_OFFSET 32
++
++#define IRQ_SOURCE(base_addr) (INT_CTRL_TYPE(base_addr + 0x00))
++#define IRQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x04 ))
++#define IRQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x08 ))
++#define IRQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x0C ))
++#define IRQ_TLEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x10 ))
++#define IRQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x14 ))
++#define FIQ_SOURCE(base_addr) (INT_CTRL_TYPE (base_addr + 0x20 ))
++#define FIQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x24 ))
++#define FIQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x28 ))
++#define FIQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x2C ))
++#define FIQ_LEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x30 ))
++#define FIQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x34 ))
++
++#ifdef CONFIG_SL3516_ASIC
++#define IRQ_SERIRQ0_OFFSET 30
++#define IRQ_PCID_OFFSET 29
++#define IRQ_PCIC_OFFSET 28
++#define IRQ_PCIB_OFFSET 27
++#define IRQ_PWR_OFFSET 26
++#define IRQ_CIR_OFFSET 25
++#define IRQ_GPIO2_OFFSET 24
++#define IRQ_GPIO1_OFFSET 23
++#define IRQ_GPIO_OFFSET 22
++#define IRQ_SSP_OFFSET 21
++#define IRQ_LPC_OFFSET 20
++#define IRQ_LCD_OFFSET 19
++#define IRQ_UART_OFFSET 18
++#define IRQ_RTC_OFFSET 17
++#define IRQ_TIMER3_OFFSET 16
++#define IRQ_TIMER2_OFFSET 15
++#define IRQ_TIMER1_OFFSET 14
++#define IRQ_FLASH_OFFSET 12
++#define IRQ_USB1_OFFSET 11
++#define IRQ_USB0_OFFSET 10
++#define IRQ_DMA_OFFSET 9
++#define IRQ_PCI_OFFSET 8
++#define IRQ_IPSEC_OFFSET 7
++#define IRQ_RAID_OFFSET 6
++#define IRQ_IDE1_OFFSET 5
++#define IRQ_IDE0_OFFSET 4
++#define IRQ_WATCHDOG_OFFSET 3
++#define IRQ_GMAC1_OFFSET 2
++#define IRQ_GMAC0_OFFSET 1
++#define IRQ_CPU0_IP_IRQ_OFFSET 0
++
++#define IRQ_SERIRQ0_MASK (1<<30)
++#define IRQ_PCID_MASK (1<<29)
++#define IRQ_PCIC_MASK (1<<28)
++#define IRQ_PCIB_MASK (1<<27)
++#define IRQ_PWR_MASK (1<<26)
++#define IRQ_CIR_MASK (1<<25)
++#define IRQ_GPIO2_MASK (1<<24)
++#define IRQ_GPIO1_MASK (1<<23)
++#define IRQ_GPIO_MASK (1<<22)
++#define IRQ_SSP_MASK (1<<21)
++#define IRQ_LPC_MASK (1<<20)
++#define IRQ_LCD_MASK (1<<19)
++#define IRQ_UART_MASK (1<<18)
++#define IRQ_RTC_MASK (1<<17)
++#define IRQ_TIMER3_MASK (1<<16)
++#define IRQ_TIMER2_MASK (1<<15)
++#define IRQ_TIMER1_MASK (1<<14)
++#define IRQ_FLASH_MASK (1<<12)
++#define IRQ_USB1_MASK (1<<11)
++#define IRQ_USB0_MASK (1<<10)
++#define IRQ_DMA_MASK (1<< 9)
++#define IRQ_PCI_MASK (1<< 8)
++#define IRQ_IPSEC_MASK (1<< 7)
++#define IRQ_RAID_MASK (1<< 6)
++#define IRQ_IDE1_MASK (1<< 5)
++#define IRQ_IDE0_MASK (1<< 4)
++#define IRQ_WATCHDOG_MASK (1<< 3)
++#define IRQ_GMAC1_MASK (1<< 2)
++#define IRQ_GMAC0_MASK (1<< 1)
++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0)
++#else
++#define IRQ_SERIRQ0_OFFSET 30
++#define IRQ_PCID_OFFSET 29
++#define IRQ_PCIC_OFFSET 28
++#define IRQ_PCIB_OFFSET 27
++#define IRQ_PWR_OFFSET 26
++#define IRQ_CIR_OFFSET 25
++#define IRQ_GPIO2_OFFSET 24
++#define IRQ_GPIO1_OFFSET 23
++#define IRQ_GPIO_OFFSET 22
++#define IRQ_SSP_OFFSET 21
++#define IRQ_LPC_OFFSET 20
++#define IRQ_LCD_OFFSET 19
++#define IRQ_UART_OFFSET 18
++#define IRQ_RTC_OFFSET 17
++#define IRQ_TIMER3_OFFSET 16
++#define IRQ_TIMER2_OFFSET 15
++#define IRQ_TIMER1_OFFSET 14
++#define IRQ_FLASH_OFFSET 12
++#define IRQ_USB1_OFFSET 11
++#define IRQ_USB0_OFFSET 10
++#define IRQ_DMA_OFFSET 9
++#define IRQ_PCI_OFFSET 8
++#define IRQ_IPSEC_OFFSET 7
++#define IRQ_RAID_OFFSET 6
++#define IRQ_IDE1_OFFSET 5
++#define IRQ_IDE0_OFFSET 4
++#define IRQ_WATCHDOG_OFFSET 3
++#define IRQ_GMAC1_OFFSET 2
++#define IRQ_GMAC0_OFFSET 1
++#define IRQ_CPU0_IP_IRQ_OFFSET 0
++
++#define IRQ_SERIRQ0_MASK (1<<30)
++#define IRQ_PCID_MASK (1<<29)
++#define IRQ_PCIC_MASK (1<<28)
++#define IRQ_PCIB_MASK (1<<27)
++#define IRQ_PWR_MASK (1<<26)
++#define IRQ_CIR_MASK (1<<25)
++#define IRQ_GPIO2_MASK (1<<24)
++#define IRQ_GPIO1_MASK (1<<23)
++#define IRQ_GPIO_MASK (1<<22)
++#define IRQ_SSP_MASK (1<<21)
++#define IRQ_LPC_MASK (1<<20)
++#define IRQ_LCD_MASK (1<<19)
++#define IRQ_UART_MASK (1<<18)
++#define IRQ_RTC_MASK (1<<17)
++#define IRQ_TIMER3_MASK (1<<16)
++#define IRQ_TIMER2_MASK (1<<15)
++#define IRQ_TIMER1_MASK (1<<14)
++#define IRQ_FLASH_MASK (1<<12)
++#define IRQ_USB1_MASK (1<<11)
++#define IRQ_USB0_MASK (1<<10)
++#define IRQ_DMA_MASK (1<< 9)
++#define IRQ_PCI_MASK (1<< 8)
++#define IRQ_IPSEC_MASK (1<< 7)
++#define IRQ_RAID_MASK (1<< 6)
++#define IRQ_IDE1_MASK (1<< 5)
++#define IRQ_IDE0_MASK (1<< 4)
++#define IRQ_WATCHDOG_MASK (1<< 3)
++#define IRQ_GMAC1_MASK (1<< 2)
++#define IRQ_GMAC0_MASK (1<< 1)
++#define IRQ_CPU0_IP_IRQ_MASK (1<< 0)
++#endif
++
++
++#endif /* __INT_CTRL_H */
++
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/io.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/io.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,50 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/io.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARM_ARCH_IO_H
++#define __ASM_ARM_ARCH_IO_H
++
++#define IO_SPACE_LIMIT 0xffffffff
++
++
++/*
++ * Generic virtual read/write
++ */
++/*
++#define __arch_getw(a) (*(volatile unsigned short *)(a))
++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
++*/
++/*#define outsw __arch_writesw
++#define outsl __arch_writesl
++#define outsb __arch_writesb
++#define insb __arch_readsb
++#define insw __arch_readsw
++#define insl __arch_readsl*/
++
++#define __io(a) (a)
++#define __mem_pci(a) (a)
++/*
++#define __arch_getw(a) (*(volatile unsigned short *)(a))
++#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
++*/
++#define iomem_valid_addr(off,size) (1)
++#define iomem_to_phys(off) (off)
++
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/ipi.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/ipi.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,189 @@
++/*
++ * linux/include/asm-arm/arch-sl2312/system.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ * Copyright (C) 2000 Deep Blue Solutions Ltd
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_IPI_H
++#define __ASM_ARCH_IPI_H
++#include <asm/io.h>
++
++//#define spin_lock(x) spin_lock_dt(x)
++//#define spin_unlock(x) spin_unlock_dt(x)
++
++#define SWAP_OFFSET 0x400000
++#define SWAP_SIZE 0x400000
++
++#define SHARE_MEM_ADDR 0x2000000
++#define SHARE_MEM_SIZE 1024*1024
++
++
++//--> Add by jason for IPI testing
++// memory layout for maste & slave bin
++#define MASTERTEXT 0x8000
++#define SLAVETEXT 0x108000
++#define SHARESIZE 0x4000
++#define SHAREADDR SHARE_MEM_ADDR // starting 8M
++
++// CPU1 reset release
++#define GLOBAL_BASE IO_ADDRESS(0x40000000)
++#define GLOBAL_SOFTRESET (GLOBAL_BASE + 0x0C)
++#define CPU1_RESET_BIT_MASK 0x40000000
++
++// IPI , need to redefine the folliwing, bug
++#define CPU0_STATUS (GLOBAL_BASE + 0x0038)
++#define CPU1_STATUS (GLOBAL_BASE + 0x003C)
++#define CPU_IPI_BIT_MASK 0x80000000
++
++/* Your basic SMP spinlocks, allowing only a single CPU anywhere
++*/
++typedef struct {
++ volatile unsigned int lock;
++} spinlock_dt;
++
++
++#define MASTER_BIT 0x01
++#define SLAVE_BIT 0x02
++#define HEART_BIT 0x04
++#define IPI0_IRQ_BIT 0x08
++#define IPI0_FIQ_BIT 0x10
++#define IPI1_IRQ_BIT 0x20
++#define IPI1_FIQ_BIT 0x40
++
++#define IRQ 0
++#define FIQ 1
++#define DONE 0xff
++
++#define CPU0 0x0
++#define CPU1 0x1
++
++#define MAXCHAR 128*1024
++typedef struct {
++ int flag;
++ int uart_flag;
++ int cnt;
++ spinlock_dt lk;
++ char message[MAXCHAR];
++}s_mailbox;
++
++// JScale proj definition
++typedef struct {
++ u16 type; // message Type
++ u16 length; // message length, including message header
++} IPC_MSG_HDR_T;
++
++typedef struct{
++ IPC_MSG_HDR_T hdr;
++ u32 input_location;
++ u32 input_size;
++ u32 output_location;
++ u16 ScaledImageWidth;
++ u16 ScaledImageHeight;
++ u8 ScaledImageQuality;
++ u8 MaintainResultionRatio;
++ u8 TwoStepScaling;
++ u8 InputFormat;
++ u8 verbose;
++ u8 reserved[3];
++} JSCALE_REQ_T;
++
++typedef struct{
++ IPC_MSG_HDR_T hdr;
++ u32 status;
++ u32 code;
++ u32 output_size;
++} JSCALE_RSP_T;
++
++#define IPC_JSCALE_REQ_MSG 0 // JScale request from CPU-0 to CPU-1
++#define IPC_JSCALE_RSP_MSG 1 // JScale response from CPU-1 to CPU-0
++
++enum {
++ JSCALE_STATUS_OK = 0,
++ JSCALE_UNKNOWN_MSG_TYPE,
++ JSCALE_FAILED_FILE_SIZE,
++ JSCALE_FAILED_MALLOC,
++ JSCALE_FAILED_FORMAT,
++ JSCALE_DECODE_ERROR,
++ JSCALE_BUSY,
++};
++// <-- JScale
++
++#define GEMINI_IPI_IOCTL_BASE 'Z'
++#define GEMINI_IPI_JSCALE_REQ _IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T)
++#define GEMINI_IPI_JSCALE_STAT _IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T)
++
++
++/*
++* Simple spin lock operations.
++*
++*/
++
++#define spin_is_locked_dt(x)((x)->lock != 0)
++
++static inline int test_and_set_dt(spinlock_dt *lock)
++{
++unsigned long tmp;
++__asm__ __volatile__(
++"swp %0, %2, [%1]\n"
++: "=&r" (tmp)
++: "r" (&lock->lock), "r" (1)
++: "cc", "memory");
++
++return tmp;
++}
++
++static inline void spin_lock_dt(spinlock_dt *lock)
++{
++
++unsigned long tmp;
++__asm__ __volatile__(
++"1: ldr %0, [%1]\n"
++"teq %0, #0\n"
++"swpeq %0, %2, [%1]\n"
++" teqeq %0, #0\n"
++" bne 1b"
++ : "=&r" (tmp)
++ : "r" (&lock->lock), "r" (1)
++ : "cc", "memory");
++}
++
++static inline void spin_unlock_dt(spinlock_dt *lock)
++{
++ __asm__ __volatile__(
++" str %1, [%0]"
++ :
++ : "r" (&lock->lock), "r" (0)
++ : "cc", "memory");
++}
++
++static inline int getcpuid(void)
++{
++ int cpuid;
++
++ __asm__(
++"mrc p8, 0, r0, c0, c0, 0\n"
++"mov %0, r0"
++ :"=r"(cpuid)
++ :
++ :"r0");
++ return (cpuid & 0x07);
++}
++
++
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/irq.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/irq.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,23 @@
++/*
++ * linux/include/asm-arm/arch-sl2312/irq.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++ // Since we have PCI interrupt which the interrupt line is pseudo
++ // we need do some fixup
++int fixup_irq(int irq);
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/irqs.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/irqs.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,102 @@
++/*
++ * linux/include/asm-arm/arch-camelot/irqs.h
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++/* Use the Excalibur chip definitions */
++#define INT_CTRL_TYPE
++#include "asm/arch/int_ctrl.h"
++
++#ifdef CONFIG_SL3516_ASIC
++#define IRQ_SERIRQ_MAX 31
++#define IRQ_SERIRQ1 31
++#define IRQ_SERIRQ0 30
++#define IRQ_PCID 29
++#define IRQ_PCIC 28
++#define IRQ_PCIB 27
++#define IRQ_PWR 26
++#define IRQ_CIR 25
++#define IRQ_GPIO2 24
++#define IRQ_GPIO1 23
++#define IRQ_GPIO 22
++#define IRQ_SSP 21
++#define IRQ_LPC 20
++#define IRQ_LCD 19
++#define IRQ_UART 18
++#define IRQ_RTC 17
++#define IRQ_TIMER3 16
++#define IRQ_TIMER2 15
++#define IRQ_TIMER1 14
++#define IRQ_FLASH 12
++#define IRQ_USB1 11
++#define IRQ_USB0 10
++#define IRQ_DMA 9
++#define IRQ_PCI 8
++#define IRQ_IPSEC 7
++#define IRQ_RAID 6
++#define IRQ_IDE1 5
++#define IRQ_IDE0 4
++#define IRQ_WATCHDOG 3
++#define IRQ_GMAC1 2
++#define IRQ_GMAC0 1
++#define IRQ_CPU0_IP_IRQ 0
++#else
++#define IRQ_SERIRQ_MAX 31
++#define IRQ_SERIRQ1 31
++#define IRQ_SERIRQ0 30
++#define IRQ_PCID 29
++#define IRQ_PCIC 28
++#define IRQ_PCIB 27
++#define IRQ_PWR 26
++#define IRQ_CIR 25
++#define IRQ_GPIO2 24
++#define IRQ_GPIO1 23
++#define IRQ_GPIO 22
++#define IRQ_SSP 21
++#define IRQ_LPC 20
++#define IRQ_LCD 19
++#define IRQ_UART 18
++#define IRQ_RTC 17
++#define IRQ_TIMER3 16
++#define IRQ_TIMER2 15
++#define IRQ_TIMER1 14
++#define IRQ_FLASH 12
++#define IRQ_USB1 11
++#define IRQ_USB0 10
++#define IRQ_DMA 9
++#define IRQ_PCI 8
++#define IRQ_IPSEC 7
++#define IRQ_RAID 6
++#define IRQ_IDE1 5
++#define IRQ_IDE0 4
++#define IRQ_WATCHDOG 3
++#define IRQ_GMAC1 2
++#define IRQ_GMAC0 1
++#endif
++
++#define ARCH_TIMER_IRQ IRQ_TIMER2 /* for MV 4.0 */
++
++#define IRQ_PCI_INTA PCI_IRQ_OFFSET + 0
++#define IRQ_PCI_INTB PCI_IRQ_OFFSET + 1
++#define IRQ_PCI_INTC PCI_IRQ_OFFSET + 2
++#define IRQ_PCI_INTD PCI_IRQ_OFFSET + 3
++
++#define NR_IRQS (IRQ_PCI_INTD + 4)
++
++
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/it8712.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/it8712.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,24 @@
++
++#ifndef __IT8712_H__
++#define __IT8712_H__
++
++#include "asm/arch/sl2312.h"
++
++#define IT8712_IO_BASE SL2312_LPC_IO_BASE
++// Device LDN
++#define LDN_SERIAL1 0x01
++#define LDN_SERIAL2 0x02
++#define LDN_PARALLEL 0x03
++#define LDN_KEYBOARD 0x05
++#define LDN_MOUSE 0x06
++#define LDN_GPIO 0x07
++
++#define IT8712_UART1_PORT 0x3F8
++#define IT8712_UART2_PORT 0x2F8
++
++#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5
++
++void LPCSetConfig(char LdnNumber, char Index, char data);
++char LPCGetConfig(char LdnNumber, char Index);
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/memory.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/memory.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,38 @@
++/*
++ * linux/include/asm-arm/arch-sl2312/memory.h
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_MMU_H
++#define __ASM_ARCH_MMU_H
++
++/*
++ * Physical DRAM offset.
++ */
++#define PHYS_OFFSET UL(0x00000000)
++
++/*
++ * Virtual view <-> DMA view memory address translations
++ * virt_to_bus: Used to translate the virtual address to an
++ * address suitable to be passed to set_dma_addr
++ * bus_to_virt: Used to convert an address for DMA operations
++ * to an address that the kernel can use.
++ */
++#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0)
++#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/param.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/param.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,20 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/param.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/pci.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/pci.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,18 @@
++
++#ifndef __SL2312_PCI_H__
++#define __SL2312_PCI_H__
++
++#define SL2312_PCI_PMC 0x40
++#define SL2312_PCI_PMCSR 0x44
++#define SL2312_PCI_CTRL1 0x48
++#define SL2312_PCI_CTRL2 0x4c
++#define SL2312_PCI_MEM1_BASE_SIZE 0x50
++#define SL2312_PCI_MEM2_BASE_SIZE 0x54
++#define SL2312_PCI_MEM3_BASE_SIZE 0x58
++
++
++void sl2312_pci_mask_irq(unsigned int irq);
++void sl2312_pci_unmask_irq(unsigned int irq);
++int sl2312_pci_get_int_src(void);
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/platform.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/platform.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,7 @@
++#ifndef PLATFORM_H
++#define PLATFORM_H
++#include "sl2312.h"
++
++#define MAXIRQNUM 68
++#endif
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/preempt.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/preempt.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,63 @@
++/*
++ * include/asm-arm/arch-sl2312/preempt.h
++ *
++ * Timing support for preempt-stats, kfi, ilatency patches
++ *
++ * Author: dsingleton <dsingleton@mvista.com>
++ *
++ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ */
++
++#ifndef _ASM_ARCH_PREEMT_H
++#define _ASM_ARCH_PREEMT_H
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/sl2312.h>
++
++static inline unsigned long clock_diff(unsigned long start, unsigned long stop)
++{
++ return (start - stop);
++}
++
++static inline unsigned int readclock(void)
++{
++ unsigned int x;
++
++ x = readl(IO_ADDRESS(SL2312_TIMER2_BASE));
++ return x;
++}
++
++static inline unsigned __ticks_per_usec(void)
++{
++#ifdef CONFIG_SL3516_ASIC
++ unsigned int ahb_clock_rate_base=130; /* unit = MHz*/
++ unsigned int reg_v=0;
++ unsigned int ticks_usec;
++
++ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4)));
++ reg_v >>=15;
++ ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2;
++
++#else
++ unsigned int ticks_usec=20;
++#endif
++
++ return ticks_usec;
++}
++
++/*
++ * timer 1 runs @ 6Mhz 6 ticks = 1 microsecond
++ * and is configed as a count down timer.
++ */
++#define TICKS_PER_USEC __ticks_per_usec()
++#define ARCH_PREDEFINES_TICKS_PER_USEC
++
++#define clock_to_usecs(x) ((x) / TICKS_PER_USEC)
++
++#define INTERRUPTS_ENABLED(x) (!(x & PSR_I_BIT))
++
++#endif
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,254 @@
++#ifndef __sl2312_h
++#define __sl2312_h
++
++/****************************************************************************
++ * Copyright Storlink Corp 2002-2003. All rights reserved. *
++ *--------------------------------------------------------------------------*
++ * Name:board.s *
++ * Description: SL231x specfic define *
++ * Author: Plus Chen *
++ * Version: 0.9 Create
++ ****************************************************************************/
++
++/*
++ CPE address map;
++
++ +====================================================
++ 0x00000000 | FLASH
++ 0x0FFFFFFF |
++ |====================================================
++ 0x10000000 | SDRAM
++ 0x1FFFFFFF |
++ |====================================================
++ 0x20000000 | Global Registers 0x20000000-0x20FFFFFF
++ | EMAC and DMA 0x21000000-0x21FFFFFF
++ | UART Module 0x22000000-0x22FFFFFF
++ | Timer Module 0x23000000-0x23FFFFFF
++ | Interrupt Module 0x24000000-0x24FFFFFF
++ | RTC Module 0x25000000-0x25FFFFFF
++ | LPC Host Controller 0x26000000-0x26FFFFFF
++ | LPC Peripherial IO 0x27000000-0x27FFFFFF
++ | WatchDog Timer 0x28000000-0x28FFFFFF
++ 0x2FFFFFFF | Reserved 0x29000000-0x29FFFFFF
++ |=====================================================
++ 0x30000000 | PCI IO, Configuration Registers
++ 0x3FFFFFFF |
++ |=====================================================
++ 0x40000000 | PCI Memory
++ 0x4FFFFFFF |
++ |=====================================================
++ 0x50000000 | Ethernet MAC and DMA 0x50000000-0x50FFFFFF
++ | Security and DMA 0x51000000-0x51FFFFFF
++ | IDE Channel 0 Register 0x52000000-0x527FFFFF
++ | IDE Channel 1 Register 0x52800000-0x52FFFFFF
++ | USB Register 0x53000000-0x53FFFFFF
++ | Flash Controller 0x54000000-0x54FFFFFF
++ | DRAM Controller 0x55000000-0x55FFFFFF
++ 0x5FFFFFFF | Reserved 0x56000000-0x5FFFFFFF
++ |=====================================================
++ 0x60000000 | Reserved
++ 0x6FFFFFFF |
++ |=====================================================
++ 0x70000000 | FLASH shadow Memory
++ 0x7FFFFFFF |
++ |=====================================================
++ 0x80000000 | Big Endian of memory 0x00000000-0x7FFFFFFF
++ 0xFFFFFFFF |
++ +=====================================================
++*/
++
++
++
++/*-------------------------------------------------------------------------------
++ Memory Map definitions
++-------------------------------------------------------------------------------- */
++#define TEST 1
++#if 0
++
++static inline int GETCPUID()
++{
++ int cpuid;
++ __asm__(
++"mrc p8, 0, r0, c0, c0, 0\n"
++"mov %0, r0"
++ :"=r"(cpuid)
++ :
++ :"r0");
++ return (cpuid & 0x07);
++}
++#endif
++#define SL2312_SRAM_BASE 0x70000000 // SRAM base after remap
++#define SL2312_DRAM_BASE 0x00000000 // DRAM base after remap
++#define SL2312_RAM_BASE 0x10000000 // RAM code base before remap
++#define SL2312_FLASH_BASE 0x30000000
++#define SL2312_ROM_BASE 0x30000000
++#define SL2312_GLOBAL_BASE 0x40000000
++#define SL2312_WAQTCHDOG_BASE 0x41000000
++#define SL2312_UART_BASE 0x42000000
++#define SL2312_TIMER_BASE 0x43000000
++#define SL2312_LCD_BASE 0x44000000
++#define SL2312_RTC_BASE 0x45000000
++#define SL2312_SATA_BASE 0x46000000
++#define SL2312_LPC_HOST_BASE 0x47000000
++#define SL2312_LPC_IO_BASE 0x47800000
++// #define SL2312_INTERRUPT_BASE 0x48000000
++#define SL2312_INTERRUPT0_BASE 0x48000000
++#define SL2312_INTERRUPT1_BASE 0x49000000
++//#define SL2312_INTERRUPT_BASE ((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE)
++#define SL2312_INTERRUPT_BASE 0x48000000
++#define SL2312_SSP_CTRL_BASE 0x4A000000
++#define SL2312_POWER_CTRL_BASE 0x4B000000
++#define SL2312_CIR_BASE 0x4C000000
++#define SL2312_GPIO_BASE 0x4D000000
++#define SL2312_GPIO_BASE1 0x4E000000
++#define SL2312_GPIO_BASE2 0x4F000000
++#define SL2312_PCI_IO_BASE 0x50000000
++#define SL2312_PCI_MEM_BASE 0x58000000
++#ifdef CONFIG_NET_SL351X
++#define SL2312_TOE_BASE 0x60000000
++#define SL2312_GMAC0_BASE 0x6000A000
++#define SL2312_GMAC1_BASE 0x6000E000
++#else
++#define SL2312_GMAC0_BASE 0x60000000
++#define SL2312_GMAC1_BASE 0x61000000
++#endif
++#define SL2312_SECURITY_BASE 0x62000000
++#define SL2312_IDE0_BASE 0x63000000
++#define SL2312_IDE1_BASE 0x63400000
++#define SL2312_RAID_BASE 0x64000000
++#define SL2312_FLASH_CTRL_BASE 0x65000000
++#define SL2312_DRAM_CTRL_BASE 0x66000000
++#define SL2312_GENERAL_DMA_BASE 0x67000000
++#define SL2312_USB_BASE 0x68000000
++#define SL2312_USB0_BASE 0x68000000
++#define SL2312_USB1_BASE 0x69000000
++#define SL2312_FLASH_SHADOW 0x30000000
++#define SL2312_BIG_ENDIAN_BASE 0x80000000
++
++#ifdef CONFIG_GEMINI_IPI
++#define CPU_1_MEM_BASE 0x4000000 // 64 MB
++#define CPU_1_DATA_OFFSET 0x4000000-0x300000 // Offset 61 MB
++#endif
++
++#define SL2312_TIMER1_BASE SL2312_TIMER_BASE
++#define SL2312_TIMER2_BASE (SL2312_TIMER_BASE + 0x10)
++#define SL2312_TIMER3_BASE (SL2312_TIMER_BASE + 0x20)
++
++#define SL2312_PCI_DMA_MEM1_BASE 0x00000000
++#define SL2312_PCI_DMA_MEM2_BASE 0x00000000
++#define SL2312_PCI_DMA_MEM3_BASE 0x00000000
++#define SL2312_PCI_DMA_MEM1_SIZE 7
++#define SL2312_PCI_DMA_MEM2_SIZE 6
++#define SL2312_PCI_DMA_MEM3_SIZE 6
++
++/*-------------------------------------------------------------------------------
++ Global Module
++---------------------------------------------------------------------------------*/
++#define GLOBAL_ID 0x00
++#define GLOBAL_CHIP_ID 0x002311
++#define GLOBAL_CHIP_REV 0xA0
++#define GLOBAL_STATUS 0x04
++#define GLOBAL_CONTROL 0x1C
++#define GLOBAL_REMAP_BIT 0x01
++#define GLOBAL_RESET_REG 0x0C
++#define GLOBAL_MISC_REG 0x30
++#define PFLASH_SHARE_BIT 0x02
++
++#define GLOBAL_RESET (1<<31)
++#define RESET_CPU1 (1<<30)
++#define RESET_SATA1 (1<<27)
++#define RESET_SATA0 (1<<26)
++#define RESET_CIR (1<<25)
++#define RESET_EXT_DEV (1<<24)
++#define RESET_WD (1<<23)
++#define RESET_GPIO2 (1<<22)
++#define RESET_GPIO1 (1<<21)
++#define RESET_GPIO0 (1<<20)
++#define RESET_SSP (1<<19)
++#define RESET_UART (1<<18)
++#define RESET_TIMER (1<<17)
++#define RESET_RTC (1<<16)
++#define RESET_INT0 (1<<15)
++#define RESET_INT1 (1<<14)
++#define RESET_LCD (1<<13)
++#define RESET_LPC (1<<12)
++#define RESET_APB (1<<11)
++#define RESET_DMA (1<<10)
++#define RESET_USB1 (1<<9 )
++#define RESET_USB0 (1<<8 )
++#define RESET_PCI (1<<7 )
++#define RESET_GMAC1 (1<<6 )
++#define RESET_GMAC0 (1<<5 )
++#define RESET_IPSEC (1<<4 )
++#define RESET_RAID (1<<3 )
++#define RESET_IDE (1<<2 )
++#define RESET_FLASH (1<<1 )
++#define RESET_DRAM (1<<0 )
++
++
++
++
++
++
++
++
++/*-------------------------------------------------------------------------------
++ DRAM Module
++---------------------------------------------------------------------------------*/
++#define DRAM_SIZE_32M 0x2000000
++#define DRAM_SIZE_64M 0x4000000
++#define DRAM_SIZE_128M 0x8000000
++
++#define DRAM_SIZE DRAM_SIZE_128M
++
++#define DRAM_SDRMR 0x00
++#define SDRMR_DISABLE_DLL 0x80010000
++
++/*------------------------------------------------------------------------------
++ Share Pin Flag
++--------------------------------------------------------------------------------*/
++#ifdef CONFIG_SL2312_SHARE_PIN
++#define FLASH_SHARE_BIT 0
++#define UART_SHARE_BIT 1
++#define EMAC_SHARE_BIT 2
++#define IDE_RW_SHARE_BIT 3
++#define IDE_CMD_SHARE_BIT 4
++#endif
++/*-------------------------------------------------------------------------------
++ System Clock
++---------------------------------------------------------------------------------*/
++
++#ifndef SYS_CLK
++#ifdef CONFIG_SL3516_ASIC
++#define SYS_CLK 150000000
++#else
++#define SYS_CLK 20000000
++#endif
++#endif
++
++#define AHB_CLK SYS_CLK
++#define MAX_TIMER 3
++#ifndef APB_CLK
++#ifdef CONFIG_SL3516_ASIC
++#define APB_CLK (SYS_CLK / 6)
++#else
++#define APB_CLK SYS_CLK
++#endif
++#endif
++
++#ifdef CONFIG_SL3516_ASIC
++#define UART_CLK 48000000 // 30000000 for GeminiA chip, else 48000000
++#else
++#define UART_CLK 48000000
++#endif
++
++#define SL2312_BAUD_115200 (UART_CLK / 1843200)
++#define SL2312_BAUD_57600 (UART_CLK / 921600)
++#define SL2312_BAUD_38400 (UART_CLK / 614400)
++#define SL2312_BAUD_19200 (UART_CLK / 307200)
++#define SL2312_BAUD_14400 (UART_CLK / 230400)
++#define SL2312_BAUD_9600 (UART_CLK / 153600)
++
++#endif
++
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312_ipsec.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl2312_ipsec.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,684 @@
++#ifndef _IPSEC_DIAG_H
++#define _IPSEC_DIAG_H
++
++#include <linux/scatterlist.h>
++
++#define BIG_ENDIAN 0
++
++#define IPSEC_TEST 0
++#define ZERO_COPY 1
++
++#define UINT unsigned int
++#define BYTE unsigned char
++
++/* define cipher algorithm */
++enum CIPHER {
++ DES_ECB_E =20,
++ TDES_ECB_E =21,
++ AES_ECB_E =22,
++ DES_CBC_E =24,
++ TDES_CBC_E =25,
++ AES_CBC_E =26,
++
++ DES_ECB_D =27,
++ TDES_ECB_D =28,
++ AES_ECB_D =29,
++ DES_CBC_D =31,
++ TDES_CBC_D =32,
++ AES_CBC_D =33,
++ A_SHA1 =12,
++ A_HMAC_SHA1 =13,
++ A_MD5 =14,
++ A_HMAC_MD5 =15,
++};
++
++// opMode
++#define CIPHER_ENC 0x1
++#define CIPHER_DEC 0x3
++#define AUTH 0x4
++#define ENC_AUTH 0x5
++#define AUTH_DEC 0x7
++
++// cipherAlgorithm
++#define CBC_DES 0x4
++#define CBC_3DES 0x5
++#define CBC_AES 0x6
++#define ECB_DES 0x0
++#define ECB_3DES 0x1
++#define ECB_AES 0x2
++
++// authAlgorithm
++#define SHA1 0
++#define MD5 1
++#define HMAC_SHA1 2
++#define HMAC_MD5 3
++#define FCS 4
++
++//cipher mode
++#define ECB 0
++#define CBC 1
++
++// authMode
++#define AUTH_APPEND 0
++#define AUTH_CHKVAL 1
++
++/******************************************************/
++/* the offset of IPSEC DMA register */
++/******************************************************/
++enum IPSEC_DMA_REGISTER {
++ IPSEC_DMA_DEVICE_ID = 0xff00,
++ IPSEC_DMA_STATUS = 0xff04,
++ IPSEC_TXDMA_CTRL = 0xff08,
++ IPSEC_TXDMA_FIRST_DESC = 0xff0c,
++ IPSEC_TXDMA_CURR_DESC = 0xff10,
++ IPSEC_RXDMA_CTRL = 0xff14,
++ IPSEC_RXDMA_FIRST_DESC = 0xff18,
++ IPSEC_RXDMA_CURR_DESC = 0xff1c,
++ IPSEC_TXDMA_BUF_ADDR = 0xff28,
++ IPSEC_RXDMA_BUF_ADDR = 0xff38,
++ IPSEC_RXDMA_BUF_SIZE = 0xff30,
++};
++
++#define IPSEC_STATUS_REG 0x00a8
++#define IPSEC_RAND_NUM_REG 0x00ac
++
++/******************************************************/
++/* the field definition of IPSEC DMA Module Register */
++/******************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff00
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int p_wclk : 4; /* DMA_APB write clock period */
++ unsigned int p_rclk : 4; /* DMA_APB read clock period */
++ unsigned int : 8;
++ unsigned int device_id : 12;
++ unsigned int revision_id : 4;
++#else
++ unsigned int revision_id : 4;
++ unsigned int device_id : 12;
++ unsigned int : 8;
++ unsigned int p_rclk : 4; /* DMA_APB read clock period */
++ unsigned int p_wclk : 4; /* DMA_APB write clock period */
++#endif
++ } bits;
++} IPSEC_DMA_DEVICE_ID_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff04
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ts_finish : 1; /* finished tx interrupt */
++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
++ unsigned int rs_finish : 1; /* finished rx interrupt */
++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
++ unsigned int intr : 8; /* Peripheral interrupt */
++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */
++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */
++ unsigned int : 3;
++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */
++#else
++ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */
++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
++ unsigned int : 3;
++ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */
++ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */
++ unsigned int intr : 8; /* Peripheral interrupt */
++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
++ unsigned int rs_finish : 1; /* finished rx interrupt */
++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
++ unsigned int ts_finish : 1; /* finished tx interrupt */
++#endif
++ } bits;
++} IPSEC_DMA_STATUS_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff08
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_start : 1; /* Start DMA transfer */
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int td_prot : 4; /* TxDMA protection control */
++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++#else
++ unsigned int : 14;
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
++ unsigned int td_prot : 4; /* TxDMA protection control */
++ unsigned int : 1;
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_start : 1; /* Start DMA transfer */
++#endif
++ } bits;
++} IPSEC_TXDMA_CTRL_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff0c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int : 3;
++#else
++ unsigned int : 3;
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++#endif
++ } bits;
++} IPSEC_TXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff10
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int sof_eof : 2;
++#else
++ unsigned int sof_eof : 2;
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++#endif
++ } bits;
++} IPSEC_TXDMA_CURR_DESC_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff14
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_start : 1; /* Start DMA transfer */
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++#else
++ unsigned int : 14;
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int : 1;
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_start : 1; /* Start DMA transfer */
++#endif
++ } bits;
++} IPSEC_RXDMA_CTRL_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff18
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int : 3;
++#else
++ unsigned int : 3;
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++#endif
++ } bits;
++} IPSEC_RXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff1c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int sof_eof : 2;
++#else
++ unsigned int sof_eof : 2;
++ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++#endif
++ } bits;
++} IPSEC_RXDMA_CURR_DESC_T;
++
++
++
++/******************************************************/
++/* the field definition of IPSEC module Register */
++/******************************************************/
++typedef union
++{
++ unsigned int id;
++ struct bit_0000
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int device_id : 28;
++ unsigned int revision_id : 4;
++#else
++ unsigned int revision_id : 4;
++ unsigned int device_id : 28;
++#endif
++ } bits;
++} IPSEC_ID_T;
++
++typedef union
++{
++ unsigned int control;
++ struct bit_0004
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */
++ unsigned int : 1;
++ unsigned int cipher_algorithm : 3;
++ unsigned int aesnk : 4; /* AES Key Size */
++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */
++ unsigned int : 2;
++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */
++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */
++ unsigned int auth_algorithm : 3;
++ unsigned int : 1;
++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */
++ /* by the authentication module */
++ unsigned int process_id : 8; /* Used to identify process.This number will be */
++ /* copied to the descriptor status of received packet*/
++#else
++ unsigned int process_id : 8; /* Used to identify process.This number will be */
++ /* copied to the descriptor status of received packet*/
++ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */
++ /* by the authentication module */
++ unsigned int : 1;
++ unsigned int auth_algorithm : 3;
++ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */
++ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */
++ unsigned int : 2;
++ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */
++ unsigned int aesnk : 4; /* AES Key Size */
++ unsigned int cipher_algorithm : 3;
++ unsigned int : 1;
++ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */
++#endif
++ } bits;
++} IPSEC_CONTROL_T;
++
++
++typedef union
++{
++ unsigned int cipher_packet;
++ struct bit_0008
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */
++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
++#else
++ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
++ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */
++#endif
++ } bits;
++} IPSEC_CIPHER_PACKET_T;
++
++typedef union
++{
++ unsigned int auth_packet;
++ struct bit_000c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */
++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
++#else
++ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
++ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */
++#endif
++ } bits;
++} IPSEC_AUTH_PACKET_T;
++
++typedef union
++{
++ unsigned int status;
++ struct bit_00a8
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */
++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */
++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */
++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */
++ unsigned int : 16;
++ unsigned int parser_err_code: 4; /* Authentication Compare result */
++ unsigned int auth_err_code : 4; /* Authentication module error code */
++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */
++#else
++ unsigned int cipher_err_code: 4; /* Cipher module erroe code */
++ unsigned int auth_err_code : 4; /* Authentication module error code */
++ unsigned int parser_err_code: 4; /* Authentication Compare result */
++ unsigned int : 16;
++ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */
++ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */
++ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */
++ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */
++#endif
++ } bits;
++} IPSEC_STATUS_T;
++
++
++
++/************************************************************************/
++/* IPSec Descriptor Format */
++/************************************************************************/
++typedef struct descriptor_t
++{
++ union frame_control_t
++ {
++ unsigned int bits32;
++ struct bits_0000
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int : 1; /* authentication compare result */
++ unsigned int : 6; /* checksum[15:8] */
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++#else
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int : 6; /* checksum[15:8] */
++ unsigned int : 1; /* authentication compare result */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++#endif
++ } bits;
++ } frame_ctrl;
++
++ union flag_status_t
++ {
++ unsigned int bits32;
++ struct bits_0004
++ {
++#if (BIG_ENDIAN==1)
++// unsigned int checksum : 8; /* checksum[7:0] */
++ unsigned int : 4;
++ unsigned int auth_result: 1;
++ unsigned int wep_crc_ok : 1;
++ unsigned int tkip_mic_ok: 1;
++ unsigned int ccmp_mic_ok: 1;
++ unsigned int process_id : 8;
++ unsigned int frame_count:16;
++#else
++ unsigned int frame_count:16;
++ unsigned int process_id : 8;
++ unsigned int ccmp_mic_ok: 1;
++ unsigned int tkip_mic_ok: 1;
++ unsigned int wep_crc_ok : 1;
++ unsigned int auth_result: 1;
++ unsigned int : 4;
++// unsigned int checksum : 8; /* checksum[7:0] */
++#endif
++ } bits_rx_status;
++
++ struct bits_0005
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 8;
++ unsigned int process_id : 8;
++ unsigned int frame_count:16;
++#else
++ unsigned int frame_count:16;
++ unsigned int process_id : 8;
++ unsigned int : 8;
++#endif
++ } bits_tx_status;
++
++ struct bits_0006
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int :22;
++ unsigned int tqflag :10;
++#else
++ unsigned int tqflag :10;
++ unsigned int :22;
++#endif
++ } bits_tx_flag;
++ } flag_status;
++
++ unsigned int buf_adr; /* data buffer address */
++
++ union next_desc_t
++ {
++ unsigned int next_descriptor;
++ struct bits_000c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar :28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */
++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
++#else
++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
++ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar :28; /* next descriptor address */
++#endif
++ } bits;
++ } next_desc;
++} IPSEC_DESCRIPTOR_T;
++
++
++typedef struct IPSEC_S
++{
++ unsigned char *tx_bufs;
++ unsigned char *rx_bufs;
++ IPSEC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/
++ IPSEC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/
++ IPSEC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */
++ IPSEC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */
++ IPSEC_DESCRIPTOR_T *tx_finished_desc;
++ IPSEC_DESCRIPTOR_T *rx_finished_desc;
++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */
++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */
++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */
++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */
++} IPSEC_T;
++
++
++/*=====================================================================================================*/
++/* Data Structure of IPSEC Control Packet */
++/*=====================================================================================================*/
++typedef struct IPSEC_ECB_AUTH_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
++ unsigned char cipher_key[8*4];
++ unsigned char auth_check_val[5*4];
++} IPSEC_ECB_AUTH_T;
++
++typedef struct IPSEC_CBC_AUTH_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
++ unsigned char cipher_iv[4*4];
++ unsigned char cipher_key[8*4];
++ unsigned char auth_check_val[5*4];
++} IPSEC_CBC_AUTH_T;
++
++typedef struct IPSEC_ECB_HMAC_AUTH_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
++ unsigned char cipher_key[8*4];
++ unsigned char auth_key[16*4];
++ unsigned char auth_check_val[5*4];
++} IPSEC_ECB_AUTH_HMAC_T;
++
++typedef struct IPSEC_CBC_HMAC_AUTH_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
++ unsigned char cipher_iv[4*4];
++ unsigned char cipher_key[8*4];
++ unsigned char auth_key[16*4];
++ unsigned char auth_check_val[5*4];
++} IPSEC_CBC_AUTH_HMAC_T;
++
++typedef struct IPSEC_HMAC_AUTH_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
++ unsigned char auth_key[16*4];
++ unsigned char auth_check_val[5*4];
++} IPSEC_HMAC_AUTH_T;
++
++typedef union
++{
++ unsigned char auth_pkt[28];
++
++ struct IPSEC_AUTH_S
++ {
++ IPSEC_CONTROL_T control; /* control parameter(4-byte) */
++ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter(4-byte) */
++ unsigned char auth_check_val[5*4];
++ } var;
++} IPSEC_AUTH_T;
++
++typedef struct IPSEC_CIPHER_CBC_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ unsigned char cipher_iv[4*4];
++ unsigned char cipher_key[8*4];
++} IPSEC_CIPHER_CBC_T;
++
++typedef struct IPSEC_CIPHER_ECB_S
++{
++ IPSEC_CONTROL_T control; /* control parameter */
++ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
++ unsigned char cipher_key[8*4];
++} IPSEC_CIPHER_ECB_T;
++
++
++/****************************************************************************
++ * Structure Definition *
++ ****************************************************************************/
++struct IPSEC_PACKET_S
++{
++ unsigned int op_mode; /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */
++ unsigned int cipher_algorithm; /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */
++ unsigned int auth_algorithm; /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */
++ unsigned int auth_result_mode; /* AUTH_APPEND(0),AUTH_CHKVAL(1) */
++ unsigned int process_id; /* Used to identify the process */
++ unsigned int auth_header_len; /* Header length to be skipped by the authenticator */
++ unsigned int auth_algorithm_len; /* Length of message body that is to be authenticated */
++ unsigned int cipher_header_len; /* Header length to be skipped by the cipher */
++ unsigned int cipher_algorithm_len; /* Length of message body to be encrypted or decrypted */
++ unsigned char iv[16]; /* Initial vector used for DES,3DES,AES */
++ unsigned int iv_size; /* Initial vector size */
++ unsigned char auth_key[64]; /* authentication key */
++ unsigned int auth_key_size; /* authentication key size */
++ unsigned char cipher_key[32]; /* cipher key */
++ unsigned int cipher_key_size; /* cipher key size */
++ struct scatterlist *in_packet; /* input_packet buffer pointer */
++ //unsigned char *in_packet; /* input_packet buffer pointer */
++ unsigned int pkt_len; /* input total packet length */
++ unsigned char auth_checkval[20]; /* Authentication check value/FCS check value */
++ struct IPSEC_PACKET_S *next,*prev; /* pointer to next/previous operation to perform on buffer */
++ void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */
++ unsigned char *out_packet; /* output_packet buffer pointer */
++ //struct scatterlist *out_packet; /* output_packet buffer pointer */
++ unsigned int out_pkt_len; /* output total packet length */
++ unsigned int auth_cmp_result; /* authentication compare result */
++ unsigned int checksum; /* checksum value */
++ unsigned int status; /* ipsec return status. 0:success, others:fail */
++#if (IPSEC_TEST == 1)
++ unsigned char *sw_packet; /* for test only */
++ unsigned int sw_pkt_len; /* for test only */
++#endif
++} ;
++
++/*****************************************************************************
++ * Function : ipsec_crypto_hw_process
++ * Description : This function processes H/W authentication and cipher.
++ * Input : op_info - the authentication and cipher information for IPSec module.
++ * Output : none.
++ * Return : 0 - success, others - failure.
++ *****************************************************************************/
++int ipsec_crypto_hw_process(struct IPSEC_PACKET_S *op_info);
++
++int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode);
++int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode);
++#if 0
++void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result);
++void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size,
++ unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct);
++void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len,
++ BYTE *auth_key,char authAlgorithm,char *auth_result,
++ char *pt, unsigned int pt_len,char *cipher_key, int key_size,
++ char *iv, char cipherAlgorithm,char *ct);
++#endif
++
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl_random.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl_random.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,2 @@
++#define RANDOM_ADD (IO_ADDRESS (0x051000000) + 0x0AC)
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/system.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/system.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,54 @@
++/*
++ * linux/include/asm-arm/arch-sl2312/system.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ * Copyright (C) 2000 Deep Blue Solutions Ltd
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __ASM_ARCH_SYSTEM_H
++#define __ASM_ARCH_SYSTEM_H
++
++#include <asm/arch/platform.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/it8712.h>
++#include <asm/io.h>
++
++static void arch_idle(void)
++{
++ /*
++ * This should do all the clock switching
++ * and wait for interrupt tricks
++ */
++ cpu_do_idle();
++}
++
++extern __inline__ void arch_reset(char mode)
++{
++ __raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG);
++}
++
++
++void (*pm_power_off)(void);
++//{
++// printk("arch_power_off\n");
++
++ // Power off
++// __raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
++
++//}
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/timer.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/timer.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,53 @@
++/*
++ *
++ * This file contains the register definitions for the Excalibur
++ * Timer TIMER00.
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __TIMER_H
++#define __TIMER_H
++
++/*
++ * Register definitions for the timers
++ */
++
++#define TIMER_COUNT(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x00 ))
++#define TIMER_LOAD(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x04 ))
++#define TIMER_MATCH1(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x08 ))
++#define TIMER_MATCH2(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x0C ))
++#define TIMER_CR(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x30 ))
++#define TIMER_1_CR_ENABLE_MSK (0x00000001)
++#define TIMER_1_CR_ENABLE_OFST (0)
++#define TIMER_1_CR_CLOCK_MSK (0x00000002)
++#define TIMER_1_CR_CLOCK_OFST (1)
++#define TIMER_1_CR_INT_MSK (0x00000004)
++#define TIMER_1_CR_INT_OFST (2)
++#define TIMER_2_CR_ENABLE_MSK (0x00000008)
++#define TIMER_2_CR_ENABLE_OFST (3)
++#define TIMER_2_CR_CLOCK_MSK (0x00000010)
++#define TIMER_2_CR_CLOCK_OFST (4)
++#define TIMER_2_CR_INT_MSK (0x00000020)
++#define TIMER_2_CR_INT_OFST (5)
++#define TIMER_3_CR_ENABLE_MSK (0x00000040)
++#define TIMER_3_CR_ENABLE_OFST (6)
++#define TIMER_3_CR_CLOCK_MSK (0x00000080)
++#define TIMER_3_CR_CLOCK_OFST (7)
++#define TIMER_3_CR_INT_MSK (0x00000100)
++#define TIMER_3_CR_INT_OFST (8)
++
++#endif /* __TIMER00_H */
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/timex.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/timex.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,29 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/timex.h
++ *
++ * Excalibur timex specifications
++ *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++/*
++ * ??
++ */
++#include <asm/arch/sl2312.h>
++
++#define CLOCK_TICK_RATE APB_CLK
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/uart.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/uart.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,100 @@
++/* *
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#ifndef __UART_H
++#define __UART_H
++
++/*
++ * Register definitions for the UART
++ */
++
++#define UART_TX_FIFO_SIZE (15)
++
++#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // read
++#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // write
++#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x04))
++#define UART_IER_MS (0x08)
++#define UART_IER_RLS (0x04)
++#define UART_IER_TE (0x02)
++#define UART_IER_DR (0x01)
++#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // read
++#define UART_IIR_NONE (0x01) /* No interrupt pending */
++#define UART_IIR_RLS (0x06) /* Receive Line Status */
++#define UART_IIR_DR (0x04) /* Receive Data Ready */
++#define UART_IIR_TIMEOUT (0x0c) /* Receive Time Out */
++#define UART_IIR_TE (0x02) /* THR Empty */
++#define UART_IIR_MODEM (0x00) /* Modem Status */
++#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // write
++#define UART_FCR_FE (0x01) /* FIFO Enable */
++#define UART_FCR_RXFR (0x02) /* Rx FIFO Reset */
++#define UART_FCR_TXFR (0x04) /* Tx FIFO Reset */
++#define UART_FCR_FIFO_1C (0x00)
++#define UART_FCR_FIFO_4C (0x40)
++#define UART_FCR_FIFO_8C (0x80)
++#define UART_FCR_FIFO_14C (0xC0)
++#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0C))
++#define UART_LCR_MSK (0x03)
++#define UART_LCR_LEN5 (0x00)
++#define UART_LCR_LEN6 (0x01)
++#define UART_LCR_LEN7 (0x02)
++#define UART_LCR_LEN8 (0x03)
++#define UART_LCR_STOP (0x04)
++#define UART_LCR_EVEN (0x18) /* Even Parity */
++#define UART_LCR_ODD (0x08) /* Odd Parity */
++#define UART_LCR_PE (0x08) /* Parity Enable */
++#define UART_LCR_SETBREAK (0x40) /* Set Break condition */
++#define UART_LCR_STICKPARITY (0x20) /* Stick Parity Enable */
++#define UART_LCR_DLAB (0x80) /* Divisor Latch Access Bit */
++#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x10))
++#define UART_MCR_DTR (0x1) /* Data Terminal Ready */
++#define UART_MCR_RTS (0x2) /* Request to Send */
++#define UART_MCR_OUT1 (0x4) /* output 1 */
++#define UART_MCR_OUT2 (0x8) /* output2 or global interrupt enable */
++#define UART_MCR_LPBK (0x10) /* loopback mode */
++#define UART_MCR_MASK (0xE3)
++#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x14))
++#define UART_LSR_DR (0x01) /* Data Ready */
++#define UART_LSR_OE (0x02) /* Overrun Error */
++#define UART_LSR_PE (0x04) /* Parity Error */
++#define UART_LSR_FE (0x08) /* Framing Error */
++#define UART_LSR_BI (0x10) /* Break Interrupt */
++#define UART_LSR_THRE (0x20) /* THR Empty */
++#define UART_LSR_TE (0x40) /* Transmitte Empty */
++#define UART_LSR_DE (0x80) /* FIFO Data Error */
++#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x18))
++#define UART_MSR_DELTACTS (0x01) /* Delta CTS */
++#define UART_MSR_DELTADSR (0x02) /* Delta DSR */
++#define UART_MSR_TERI (0x04) /* Trailing Edge RI */
++#define UART_MSR_DELTACD (0x08) /* Delta CD */
++#define UART_MSR_CTS (0x10) /* Clear To Send */
++#define UART_MSR_DSR (0x20) /* Data Set Ready */
++#define UART_MSR_RI (0x40) /* Ring Indicator */
++#define UART_MSR_DCD (0x80) /* Data Carrier Detect */
++#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x1C))
++#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0))
++#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x4))
++#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x8))
++#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x20))
++#define UART_MDR_SERIAL (0x0)
++
++#define UART_MSR_DDCD 0x08 /* Delta DCD */
++#define UART_MSR_DDSR 0x02 /* Delta DSR */
++#define UART_MSR_DCTS 0x01 /* Delta CTS */
++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
++
++
++#endif /* __UART_H */
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/uncompress.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/uncompress.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,94 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/uncompress.h
++ *
++ * Copyright (C) 1999 ARM Limited
++ * Copyright (C) 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include "asm/arch/platform.h"
++#include "asm/arch/hardware.h"
++#define UART_TYPE (volatile unsigned int*)
++#ifndef CONFIG_SERIAL_IT8712
++#include "asm/arch/uart.h"
++#endif
++extern unsigned int it8712_uart_base;
++
++/*
++ * This does not append a newline
++ */
++static void putstr(const char *s)
++{
++
++#ifdef CONFIG_SERIAL_IT8712
++
++ unsigned char *base,*status,stat;
++ int i ;
++
++ status = (unsigned char*)it8712_uart_base + 5;
++ base = (unsigned char*)it8712_uart_base ;
++
++ while (*s) {
++
++ stat = *status;
++ while (!(stat&0x20)) { // check status
++ for(i=0;i<0x10;i++) ;
++ status = (unsigned char*)it8712_uart_base + 5;
++ stat = *status ;
++ }
++
++ *base = *s;
++ barrier();
++
++ if (*s == '\n') {
++ stat = *status;
++ while (!(stat&0x20)) { // check status
++ for(i=0;i<0x10;i++) ;
++ status = (unsigned char*)it8712_uart_base + 5;
++ stat = *status ;
++ }
++
++ barrier();
++ *base = '\r';
++ }
++ s++;
++ }
++
++#else
++ while (*s) {
++ while (!(*UART_LSR(SL2312_UART_BASE) &
++ UART_LSR_THRE));
++ barrier();
++
++ *UART_THR(SL2312_UART_BASE) = *s;
++
++ if (*s == '\n') {
++ while (!(*UART_LSR(SL2312_UART_BASE) &
++ UART_LSR_THRE));
++ barrier();
++
++ *UART_THR(SL2312_UART_BASE) = '\r';
++ }
++ s++;
++ }
++#endif
++}
++
++/*
++ * nothing to do
++ */
++#define arch_decomp_setup()
++
++#define arch_decomp_wdog()
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/vmalloc.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/vmalloc.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,36 @@
++/*
++ * linux/include/asm-arm/arch-epxa10db/vmalloc.h
++ *
++ * Copyright (C) 2000 Russell King.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++/*
++ * Just any arbitrary offset to the start of the vmalloc VM area: the
++ * current 8MB value just means that there will be a 8MB "hole" after the
++ * physical memory until the kernel virtual memory starts. That means that
++ * any out-of-bounds memory accesses will hopefully be caught.
++ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
++ * area for the same reason. ;)
++ */
++#define VMALLOC_OFFSET (8*1024*1024)
++#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
++#define VMALLOC_VMADDR(x) ((unsigned long)(x))
++#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
++
++//#define MODULE_START (PAGE_OFFSET - 16*1048576)
++//#define MODULE_END (PAGE_OFFSET)
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/watchdog.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/watchdog.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,58 @@
++#ifndef __WATCHDOG_H
++#define __WATCHDOG_H
++
++#define WATCHDOG_BASE (IO_ADDRESS (SL2312_WAQTCHDOG_BASE))
++#define WATCHDOG_COUNTER (WATCHDOG_BASE + 0x00)
++#define WATCHDOG_LOAD (WATCHDOG_BASE + 0x04)
++#define WATCHDOG_RESTART (WATCHDOG_BASE + 0x08)
++#define WATCHDOG_CR (WATCHDOG_BASE + 0x0C)
++#define WATCHDOG_STATUS (WATCHDOG_BASE + 0x10)
++#define WATCHDOG_CLEAR (WATCHDOG_BASE + 0x14)
++#define WATCHDOG_INTRLEN (WATCHDOG_BASE + 0x18)
++
++#define WATCHDOG_WDENABLE_MSK (0x00000001)
++#define WATCHDOG_WDENABLE_OFST (0)
++#define WATCHDOG_WDRST_MSK (0x00000002)
++#define WATCHDOG_WDRST_OFST (1)
++#define WATCHDOG_WDINTR_MSK (0x00000004)
++#define WATCHDOG_WDINTR_OFST (2)
++#define WATCHDOG_WDEXT_MSK (0x00000008)
++#define WATCHDOG_WDEXT_OFST (3)
++#define WATCHDOG_WDCLOCK_MSK (0x00000010)
++#define WATCHDOG_WDCLOCK_OFST (4)
++#define WATCHDOG_CR_MASK (0x0000001F)
++
++#define WATCHDOG_CLEAR_STATUS 0x1
++#define WATCHDOG_ENABLE 1
++#define WATCHDOG_DISABLE 0
++#define WATCHDOG_RESTART_VALUE 0x5AB9
++
++#define WATCHDOG_MINOR 130
++
++#define WATCHDOG_IOCTRL_DISABLE 0x01
++#define WATCHDOG_IOCTRL_SETTIME 0x02
++#define WATCHDOG_IOCTRL_ENABLE 0x03
++#define WATCHDOG_IOCTRL_RESTART 0x04
++
++#define WATCHDOG_TIMEOUT_SCALE APB_CLK
++#define WATCHDOG_TIMEOUT_MARGIN 30
++#define WATCHDOG_DRIVER_OPEN 1
++#define WATCHDOG_DRIVER_CLOSE 0
++
++
++static void watchdog_disable(void);
++static void watchdog_enable(void);
++static int watchdog_open(struct inode *, struct file *);
++static int watchdog_release(struct inode *, struct file *);
++static ssize_t watchdog_read(struct file *, char *, size_t, loff_t *);
++static ssize_t watchdog_write(struct file *, const char *, size_t, loff_t *);
++static int watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
++#ifdef WATCHDOG_TEST
++static void watchdog_fire(int, void *, struct pt_regs *);
++#endif
++
++
++
++
++
++#endif
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/xor.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/xor.h 2008-03-13 17:48:24.508798285 +0200
+@@ -0,0 +1,29 @@
++/*
++ * include/asm-arm/arch-sl2312/xor.h
++ *
++ * Copyright (C) 2005 Storlink Corp.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef _ASM_ARCH_XOR_H
++#define _ASM_ARCH_XOR_H
++
++/*
++ * Function prototypes
++ */
++void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2);
++
++void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3);
++
++void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4);
++
++void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
++ unsigned long *p3, unsigned long *p4, unsigned long *p5);
++
++#endif /* _ASM_ARCH_XOR_H */
++
+Index: linux-2.6.23.16/include/asm-arm/cacheflush.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/cacheflush.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/asm-arm/cacheflush.h 2008-03-13 17:48:24.508798285 +0200
+@@ -46,6 +46,18 @@
+ # define MULTI_CACHE 1
+ #endif
+
++/***********************************************************************
++ * Storlink SoC -- Cache
++ ***********************************************************************/
++#if defined(CONFIG_CPU_FA526)
++# ifdef _CACHE
++# define MULTI_CACHE 1
++# else
++# define _CACHE fa
++# endif
++#endif
++/***********************************************************************/
++
+ #if defined(CONFIG_CPU_ARM926T)
+ # ifdef _CACHE
+ # define MULTI_CACHE 1
+Index: linux-2.6.23.16/include/asm-arm/page.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/page.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/asm-arm/page.h 2008-03-13 17:48:24.508798285 +0200
+@@ -74,6 +74,18 @@
+ # endif
+ #endif
+
++/***********************************************************************
++ * Storlink SoC -- flash
++ ***********************************************************************/
++#ifdef CONFIG_CPU_COPY_FA
++# ifdef _USER
++# define MULTI_USER 1
++# else
++# define _USER fa
++# endif
++#endif
++/***********************************************************************/
++
+ #ifdef CONFIG_CPU_SA1100
+ # ifdef _USER
+ # define MULTI_USER 1
+Index: linux-2.6.23.16/include/asm-arm/proc-fns.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/proc-fns.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/asm-arm/proc-fns.h 2008-03-13 17:48:24.508798285 +0200
+@@ -89,6 +89,14 @@
+ # define CPU_NAME cpu_arm922
+ # endif
+ # endif
++# ifdef CONFIG_CPU_FA526
++# ifdef CPU_NAME
++# undef MULTI_CPU
++# define MULTI_CPU
++# else
++# define CPU_NAME cpu_fa526
++# endif
++# endif
+ # ifdef CONFIG_CPU_ARM925T
+ # ifdef CPU_NAME
+ # undef MULTI_CPU
+Index: linux-2.6.23.16/include/asm-arm/tlbflush.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/tlbflush.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/asm-arm/tlbflush.h 2008-03-13 17:58:18.542650345 +0200
+@@ -39,6 +39,8 @@
+ #define TLB_V6_D_ASID (1 << 17)
+ #define TLB_V6_I_ASID (1 << 18)
+
++#define TLB_DINVAL (1 << 28)
++#define TLB_BTB (1 << 29)
+ #define TLB_DCLEAN (1 << 30)
+ #define TLB_WB (1 << 31)
+
+@@ -52,6 +54,7 @@
+ * v4wb - ARMv4 with write buffer without I TLB flush entry instruction
+ * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
++ * fa - ARMv4 with write buffer with UTLB and branch target buffer (BTB)
+ */
+ #undef _TLB
+ #undef MULTI_TLB
+@@ -86,6 +89,44 @@
+ # define v4_always_flags (-1UL)
+ #endif
+
++#ifdef CONFIG_CPU_FA_BTB
++#define __TLB_BTB TLB_BTB
++#else
++#define __TLB_BTB 0
++#endif
++
++#ifdef CONFIG_CPU_FA_WB_DISABLE
++#define __TLB_WB 0
++#else
++#define __TLB_WB TLB_WB
++#endif
++
++/* Fix buggy CPU which doesn't invalidate Dcache properly */
++#ifdef CONFIG_CPU_FA520
++#define __TLB_DINVAL TLB_DINVAL
++#elif defined(CONFIG_CPU_FA526)
++//#define __TLB_DINVAL TLB_DINVAL
++#define __TLB_DINVAL 0
++#else
++#define __TLB_DINVAL 0
++#endif
++
++#define fa_tlb_flags (__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \
++ TLB_V4_U_FULL | TLB_V4_U_PAGE)
++
++#ifdef CONFIG_CPU_TLB_FA
++# define fa_possible_flags fa_tlb_flags
++# define fa_always_flags fa_tlb_flags
++# ifdef _TLB
++# define MULTI_TLB 1
++# else
++# define _TLB fa
++# endif
++#else
++# define fa_possible_flags 0
++# define fa_always_flags (-1UL)
++#endif
++
+ #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+ TLB_V4_I_FULL | TLB_V4_D_FULL | \
+ TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+@@ -246,12 +287,14 @@
+ v4_possible_flags | \
+ v4wbi_possible_flags | \
+ v4wb_possible_flags | \
++ fa_possible_flags | \
+ v6wbi_possible_flags)
+
+ #define always_tlb_flags (v3_always_flags & \
+ v4_always_flags & \
+ v4wbi_always_flags & \
+ v4wb_always_flags & \
++ fa_always_flags & \
+ v6wbi_always_flags)
+
+ #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+@@ -261,6 +304,9 @@
+ const int zero = 0;
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
++ if (tlb_flag(TLB_DINVAL))
++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
++
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+@@ -281,6 +327,13 @@
+ dsb();
+ isb();
+ }
++
++ if (tlb_flag(TLB_BTB))
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
+ }
+
+ static inline void local_flush_tlb_mm(struct mm_struct *mm)
+@@ -289,6 +342,9 @@
+ const int asid = ASID(mm);
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
++ if (tlb_flag(TLB_DINVAL))
++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
++
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+@@ -317,6 +373,14 @@
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
++
++ if (tlb_flag(TLB_BTB))
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
++
+ }
+
+ static inline void
+@@ -327,6 +391,9 @@
+
+ uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
++ if (tlb_flag(TLB_DINVAL))
++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all
++
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+@@ -357,6 +424,13 @@
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
++
++ if (tlb_flag(TLB_BTB))
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
+ }
+
+ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+@@ -366,6 +440,9 @@
+
+ kaddr &= PAGE_MASK;
+
++ if (tlb_flag(TLB_DINVAL))
++ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
++
+ if (tlb_flag(TLB_WB))
+ dsb();
+
+@@ -386,6 +463,12 @@
+ asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V6_I_PAGE))
+ asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
++ if (tlb_flag(TLB_BTB))
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+@@ -412,6 +495,7 @@
+ */
+ static inline void flush_pmd_entry(pmd_t *pmd)
+ {
++ const unsigned int zero = 0;
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_DCLEAN))
+@@ -419,15 +503,30 @@
+ : : "r" (pmd) : "cc");
+ if (tlb_flag(TLB_WB))
+ dsb();
++
++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
+ }
+
+ static inline void clean_pmd_entry(pmd_t *pmd)
+ {
++ const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1
+ const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+ if (tlb_flag(TLB_DCLEAN))
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
+ : : "r" (pmd) : "cc");
++
++ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
++ {
++ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
++ asm("mov r0, r0" : : );
++ asm("mov r0, r0" : : );
++ }
+ }
+
+ #undef tlb_flag
+Index: linux-2.6.23.16/include/asm-arm/xor.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/xor.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/asm-arm/xor.h 2008-03-13 17:48:24.508798285 +0200
+@@ -139,3 +139,18 @@
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_32regs); \
+ } while (0)
++
++#ifdef CONFIG_GEMINI_XOR_ACCE
++#include <asm/arch/xor.h>
++static struct xor_block_template xor_block_gemini = {
++ .name = "gemini xor acceleration",
++ .do_2 = xor_gemini_2,
++ .do_3 = xor_gemini_3,
++ .do_4 = xor_gemini_4,
++ .do_5 = xor_gemini_5,};
++#undef XOR_TRY_TEMPLATES
++#define XOR_TRY_TEMPLATES \
++ do { \
++ xor_speed(&xor_block_gemini); \
++ } while (0)
++#endif
+Index: linux-2.6.23.16/include/linux/apm_bios.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/apm_bios.h 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/include/linux/apm_bios.h 2008-03-13 17:48:24.508798285 +0200
+@@ -217,4 +217,24 @@
+ #define APM_IOC_STANDBY _IO('A', 1)
+ #define APM_IOC_SUSPEND _IO('A', 2)
+
++// add by jason for power control
++struct pwc_ioctl_data {
++ unsigned int action; // sword struct
++ unsigned int data; // stand shutdown time for PWC_SET_SHUT_TIME
++ // stand shutdown source for PWC_WAIT_BTN
++};
++
++#define POWEROFF 0x01
++#define RESTORE_DEFAULT 0x02
++#define SYSTEM_REBOOT 0x04
++
++#define PWR_SRC_CIR 0x10
++#define PWR_SRC_RTC 0x20
++#define PWR_SRC_BTN 0x40
++
++#define PWC_IOCTL_BASE 'A' // use linux APM ioctl
++#define PWC_SET_SHUT_TIME _IOW('A', 16, struct pwc_ioctl_data)
++#define PWC_WAIT_BTN _IOR('A', 17, struct pwc_ioctl_data)
++#define PWC_SHUTDOWN _IO ('A', 18)
++
+ #endif /* LINUX_APM_H */
+Index: linux-2.6.23.16/kernel/time.c
+===================================================================
+--- linux-2.6.23.16.orig/kernel/time.c 2008-03-13 17:46:04.500819685 +0200
++++ linux-2.6.23.16/kernel/time.c 2008-03-13 17:48:24.508798285 +0200
+@@ -76,6 +76,7 @@
+ * why not move it into the appropriate arch directory (for those
+ * architectures that need it).
+ */
++extern void rtc_set_time_second(unsigned int second);
+
+ asmlinkage long sys_stime(time_t __user *tptr)
+ {
+@@ -87,6 +88,10 @@
+
+ tv.tv_nsec = 0;
+
++#ifdef CONFIG_SL2312_RTC
++ rtc_set_time_second(tv.tv_sec);
++#endif
++
+ err = security_settime(&tv, NULL);
+ if (err)
+ return err;
diff --git a/target/linux/storm/patches/1002-gmac.patch b/target/linux/storm/patches/1002-gmac.patch
new file mode 100644
index 0000000000..82c72fbc35
--- /dev/null
+++ b/target/linux/storm/patches/1002-gmac.patch
@@ -0,0 +1,18584 @@
+Index: linux-2.6.23.16/drivers/net/sl2312_emac.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl2312_emac.c 2008-03-15 16:59:16.361058585 +0200
+@@ -0,0 +1,4604 @@
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch-sl2312/irqs.h>
++#include <asm/arch/it8712.h>
++#include <asm/arch/sl2312.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/sysctl_storlink.h>
++
++#define BIG_ENDIAN 0
++
++#define GMAC_DEBUG 0
++
++#define GMAC_PHY_IF 2
++
++/* define PHY address */
++#define HPHY_ADDR 0x01
++#define GPHY_ADDR 0x02
++
++#define CONFIG_ADM_6999 1
++/* define chip information */
++#define DRV_NAME "SL2312"
++#define DRV_VERSION "0.1.1"
++#define SL2312_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
++
++/* define TX/RX descriptor parameter */
++#define MAX_ETH_FRAME_SIZE 1920
++#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
++#define TX_DESC_NUM 128
++#define TX_BUF_TOT_LEN (TX_BUF_SIZE * TX_DESC_NUM)
++#define RX_BUF_SIZE MAX_ETH_FRAME_SIZE
++#define RX_DESC_NUM 256
++#define RX_BUF_TOT_LEN (RX_BUF_SIZE * RX_DESC_NUM)
++#define MAX_ISR_WORK 20
++
++unsigned int int_status = 0;
++
++/* define GMAC base address */
++#define GMAC_PHYSICAL_BASE_ADDR (SL2312_GMAC_BASE)
++#define GMAC_BASE_ADDR (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR))
++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++#define GMAC0_BASE (IO_ADDRESS(SL2312_GMAC0_BASE))
++#define GMAC1_BASE (IO_ADDRESS(SL2312_GMAC1_BASE))
++
++/* memory management utility */
++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
++
++//#define gmac_read_reg(offset) (readl(GMAC_BASE_ADDR + offset))
++//#define gmac_write_reg(offset,data,mask) writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset))
++
++/* define owner bit */
++#define CPU 0
++#define DMA 1
++
++#define ACTIVE 1
++#define NONACTIVE 0
++
++#define CONFIG_SL_NAPI
++
++#ifndef CONFIG_SL2312_MPAGE
++#define CONFIG_SL2312_MPAGE
++#endif
++
++#ifdef CONFIG_SL2312_MPAGE
++#include <linux/skbuff.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#endif
++
++#ifndef CONFIG_TXINT_DISABLE
++//#define CONFIG_TXINT_DISABLE
++#endif
++
++enum phy_state
++{
++ LINK_DOWN = 0,
++ LINK_UP = 1
++};
++
++
++/* transmit timeout value */
++#define TX_TIMEOUT (6*HZ)
++
++/***************************************/
++/* the offset address of GMAC register */
++/***************************************/
++enum GMAC_REGISTER {
++ GMAC_STA_ADD0 = 0x0000,
++ GMAC_STA_ADD1 = 0x0004,
++ GMAC_STA_ADD2 = 0x0008,
++ GMAC_RX_FLTR = 0x000c,
++ GMAC_MCAST_FIL0 = 0x0010,
++ GMAC_MCAST_FIL1 = 0x0014,
++ GMAC_CONFIG0 = 0x0018,
++ GMAC_CONFIG1 = 0x001c,
++ GMAC_CONFIG2 = 0x0020,
++ GMAC_BNCR = 0x0024,
++ GMAC_RBNR = 0x0028,
++ GMAC_STATUS = 0x002c,
++ GMAC_IN_DISCARDS= 0x0030,
++ GMAC_IN_ERRORS = 0x0034,
++ GMAC_IN_MCAST = 0x0038,
++ GMAC_IN_BCAST = 0x003c,
++ GMAC_IN_MAC1 = 0x0040,
++ GMAC_IN_MAC2 = 0x0044
++};
++
++/*******************************************/
++/* the offset address of GMAC DMA register */
++/*******************************************/
++enum GMAC_DMA_REGISTER {
++ GMAC_DMA_DEVICE_ID = 0xff00,
++ GMAC_DMA_STATUS = 0xff04,
++ GMAC_TXDMA_CTRL = 0xff08,
++ GMAC_TXDMA_FIRST_DESC = 0xff0c,
++ GMAC_TXDMA_CURR_DESC = 0xff10,
++ GMAC_RXDMA_CTRL = 0xff14,
++ GMAC_RXDMA_FIRST_DESC = 0xff18,
++ GMAC_RXDMA_CURR_DESC = 0xff1c,
++};
++
++/*******************************************/
++/* the register structure of GMAC */
++/*******************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0004
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */
++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */
++#else
++ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */
++ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */
++#endif
++ } bits;
++} GMAC_STA_ADD1_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_000c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 27;
++ unsigned int error : 1; /* enable receive of all error frames */
++ unsigned int promiscuous : 1; /* enable receive of all frames */
++ unsigned int broadcast : 1; /* enable receive of broadcast frames */
++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
++#else
++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
++ unsigned int broadcast : 1; /* enable receive of broadcast frames */
++ unsigned int promiscuous : 1; /* enable receive of all frames */
++ unsigned int error : 1; /* enable receive of all error frames */
++ unsigned int : 27;
++#endif
++ } bits;
++} GMAC_RX_FLTR_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0018
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 10;
++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */
++ unsigned int rising_latch : 1;
++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */
++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */
++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */
++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */
++ unsigned int tx_fc_en : 1; /* TX flow control enable */
++ unsigned int rx_fc_en : 1; /* RX flow control enable */
++ unsigned int sim_test : 1; /* speed up timers in simulation */
++ unsigned int dis_col : 1; /* disable 16 collisions abort function */
++ unsigned int dis_bkoff : 1; /* disable back-off function */
++ unsigned int max_len : 3; /* maximum receive frame length allowed */
++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */
++ unsigned int : 1; /* reserved */
++ unsigned int loop_back : 1; /* transmit data loopback enable */
++ unsigned int dis_rx : 1; /* disable receive */
++ unsigned int dis_tx : 1; /* disable transmit */
++#else
++ unsigned int dis_tx : 1; /* disable transmit */
++ unsigned int dis_rx : 1; /* disable receive */
++ unsigned int loop_back : 1; /* transmit data loopback enable */
++ unsigned int : 1; /* reserved */
++ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */
++ unsigned int max_len : 3; /* maximum receive frame length allowed */
++ unsigned int dis_bkoff : 1; /* disable back-off function */
++ unsigned int dis_col : 1; /* disable 16 collisions abort function */
++ unsigned int sim_test : 1; /* speed up timers in simulation */
++ unsigned int rx_fc_en : 1; /* RX flow control enable */
++ unsigned int tx_fc_en : 1; /* TX flow control enable */
++ unsigned int rgmii_en : 1; /* RGMII in-band status enable */
++ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */
++ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */
++ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */
++ unsigned int rising_latch : 1;
++ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */
++ unsigned int : 10;
++#endif
++ } bits;
++} GMAC_CONFIG0_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_001c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 28;
++ unsigned int buf_size : 4; /* per packet buffer size */
++#else
++ unsigned int buf_size : 4; /* per packet buffer size */
++ unsigned int : 28;
++#endif
++ } bits;
++} GMAC_CONFIG1_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0020
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++ unsigned int set_threshold : 16; /* flow control set threshold */
++#else
++ unsigned int set_threshold : 16; /* flow control set threshold */
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++#endif
++ } bits;
++} GMAC_CONFIG2_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0024
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 16;
++ unsigned int buf_num : 16; /* return buffer number from software */
++#else
++ unsigned int buf_num : 16; /* return buffer number from software */
++ unsigned int : 16;
++#endif
++ } bits;
++} GMAC_BNCR_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0028
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 16;
++ unsigned int buf_remain : 16; /* remaining buffer number */
++#else
++ unsigned int buf_remain : 16; /* remaining buffer number */
++ unsigned int : 16;
++#endif
++ } bits;
++} GMAC_RBNR_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_002c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 25;
++ unsigned int mii_rmii : 2; /* PHY interface type */
++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */
++ unsigned int duplex : 1; /* duplex mode */
++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
++ unsigned int link : 1; /* link status */
++#else
++ unsigned int link : 1; /* link status */
++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
++ unsigned int duplex : 1; /* duplex mode */
++ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */
++ unsigned int mii_rmii : 2; /* PHY interface type */
++ unsigned int : 25;
++#endif
++ } bits;
++} GMAC_STATUS_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_009
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 10;
++ unsigned int tx_fail : 1; /* Tx fail interrupt */
++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */
++ unsigned int : 6;
++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */
++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */
++#else
++ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */
++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
++ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */
++ unsigned int : 6;
++ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */
++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
++ unsigned int tx_fail : 1; /* Tx fail interrupt */
++ unsigned int : 10;
++#endif
++ } bits;
++} GMAC_INT_MASK_T;
++
++
++/*******************************************/
++/* the register structure of GMAC DMA */
++/*******************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff00
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 7; /* reserved */
++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */
++ unsigned int tx_err_code : 4; /* TxDMA error code */
++ unsigned int rx_err_code : 4; /* RxDMA error code */
++ unsigned int device_id : 12;
++ unsigned int revision_id : 4;
++#else
++ unsigned int revision_id : 4;
++ unsigned int device_id : 12;
++ unsigned int rx_err_code : 4; /* RxDMA error code */
++ unsigned int tx_err_code : 4; /* TxDMA error code */
++ unsigned int s_ahb_err : 1; /* Slave AHB bus error */
++ unsigned int : 7; /* reserved */
++#endif
++ } bits;
++} GMAC_DMA_DEVICE_ID_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff04
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ts_finish : 1; /* finished tx interrupt */
++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
++ unsigned int rs_finish : 1; /* finished rx interrupt */
++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
++ unsigned int : 1; /* Tx fail interrupt */
++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */
++ unsigned int : 1;
++ unsigned int : 1;
++ unsigned int : 3;
++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
++ unsigned int : 1; /* Tx fail interrupt mask */
++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */
++#else
++ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */
++ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
++ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
++ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
++ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
++ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
++ unsigned int : 1; /* Tx fail interrupt mask */
++ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
++ unsigned int : 3;
++ unsigned int : 1;
++ unsigned int : 1;
++ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */
++ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
++ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
++ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
++ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
++ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
++ unsigned int : 1; /* Tx fail interrupt */
++ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
++ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
++ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
++ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
++ unsigned int rs_finish : 1; /* finished rx interrupt */
++ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
++ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
++ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
++ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
++ unsigned int ts_finish : 1; /* finished tx interrupt */
++#endif
++ } bits;
++} GMAC_DMA_STATUS_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff08
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_start : 1; /* Start DMA transfer */
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int td_prot : 4; /* TxDMA protection control */
++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++#else
++ unsigned int : 14;
++ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
++ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
++ unsigned int td_prot : 4; /* TxDMA protection control */
++ unsigned int : 1;
++ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int td_continue : 1; /* Continue DMA operation */
++ unsigned int td_start : 1; /* Start DMA transfer */
++#endif
++ } bits;
++} GMAC_TXDMA_CTRL_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff0c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int : 3;
++#else
++ unsigned int : 3;
++ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
++ unsigned int td_first_des_ptr : 28;/* first descriptor address */
++#endif
++ } bits;
++} GMAC_TXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff10
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int : 1;
++ unsigned int sof_eof : 2;
++#else
++ unsigned int sof_eof : 2;
++ unsigned int : 1;
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++#endif
++ } bits;
++} GMAC_TXDMA_CURR_DESC_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff14
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_start : 1; /* Start DMA transfer */
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int : 1;
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int : 14;
++#else
++ unsigned int : 14;
++ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
++ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
++ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
++ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
++ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
++ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
++ unsigned int rd_prot : 4; /* DMA protection control */
++ unsigned int : 1;
++ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
++ unsigned int rd_continue : 1; /* Continue DMA operation */
++ unsigned int rd_start : 1; /* Start DMA transfer */
++#endif
++ } bits;
++} GMAC_RXDMA_CTRL_T;
++
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff18
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int : 3;
++#else
++ unsigned int : 3;
++ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
++ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
++#endif
++ } bits;
++} GMAC_RXDMA_FIRST_DESC_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit2_ff1c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar : 28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int : 1;
++ unsigned int sof_eof : 2;
++#else
++ unsigned int sof_eof : 2;
++ unsigned int : 1;
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar : 28; /* next descriptor address */
++#endif
++ } bits;
++} GMAC_RXDMA_CURR_DESC_T;
++
++
++/********************************************/
++/* Descriptor Format */
++/********************************************/
++
++typedef struct descriptor_t
++{
++ union frame_control_t
++ {
++ unsigned int bits32;
++ struct bits_0000
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int csum_state : 3; /* checksum error status */
++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */
++ unsigned int frame_state: 3; /* reference Rx Status1 */
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++#else
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int frame_state: 3; /* reference Rx Status1 */
++ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */
++ unsigned int csum_state : 3; /* checksum error status */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++#endif
++ } bits_rx;
++
++ struct bits_0001
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int : 6;
++ unsigned int success_tx : 1; /* successful transmitted */
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++#else
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int success_tx : 1; /* successful transmitted */
++ unsigned int : 6;
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++#endif
++ } bits_tx_in;
++
++ struct bits_0002
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int : 2;
++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */
++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */
++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */
++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */
++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++#else
++ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
++ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
++ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */
++ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */
++ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */
++ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */
++ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */
++ unsigned int : 2;
++ unsigned int perr : 1; /* protocol error during processing this descriptor */
++ unsigned int derr : 1; /* data error during processing this descriptor */
++ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
++#endif
++ } bits_tx_out;
++
++ } frame_ctrl;
++
++ union flag_status_t
++ {
++ unsigned int bits32;
++ struct bits_0004
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int priority : 3; /* user priority extracted from receiving frame*/
++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/
++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */
++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */
++#else
++ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */
++ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */
++ unsigned int cfi : 1; /* cfi extracted from receiving frame*/
++ unsigned int priority : 3; /* user priority extracted from receiving frame*/
++#endif
++ } bits_rx_status;
++
++ struct bits_0005
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int priority : 3; /* user priority to transmit*/
++ unsigned int cfi : 1; /* cfi to transmit*/
++ unsigned int vlan_id :12; /* VLAN ID to transmit */
++ unsigned int frame_count:16; /* total tx frame byte count */
++#else
++ unsigned int frame_count:16; /* total tx frame byte count */
++ unsigned int vlan_id :12; /* VLAN ID to transmit */
++ unsigned int cfi : 1; /* cfi to transmit*/
++ unsigned int priority : 3; /* user priority to transmit*/
++#endif
++ } bits_tx_flag;
++ } flag_status;
++
++ unsigned int buf_adr; /* data buffer address */
++
++ union next_desc_t
++ {
++ unsigned int next_descriptor;
++ struct bits_000c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int ndar :28; /* next descriptor address */
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int : 1;
++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
++#else
++ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
++ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
++ unsigned int : 1;
++ unsigned int eofie : 1; /* end of frame interrupt enable */
++ unsigned int ndar :28; /* next descriptor address */
++#endif
++ } bits;
++ } next_desc;
++} GMAC_DESCRIPTOR_T;
++
++typedef struct gmac_conf {
++ struct net_device *dev;
++ int portmap;
++ int vid;
++ int flag; /* 1: active 0: non-active */
++} sys_gmac_conf;
++
++struct gmac_private {
++ unsigned char *tx_bufs; /* Tx bounce buffer region. */
++ unsigned char *rx_bufs;
++ GMAC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/
++ GMAC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/
++ GMAC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */
++ GMAC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */
++ GMAC_DESCRIPTOR_T *tx_finished_desc;
++ GMAC_DESCRIPTOR_T *rx_finished_desc;
++ unsigned long cur_tx;
++ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
++ unsigned int tx_flag;
++ unsigned long dirty_tx;
++ unsigned char *tx_buf[TX_DESC_NUM]; /* Tx bounce buffers */
++ dma_addr_t tx_desc_dma; /* physical TX descriptor address */
++ dma_addr_t rx_desc_dma; /* physical RX descriptor address */
++ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */
++ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */
++ struct net_device_stats stats;
++ pid_t thr_pid;
++ wait_queue_head_t thr_wait;
++ struct completion thr_exited;
++ spinlock_t lock;
++ int time_to_die;
++ unsigned int tx_desc_hdr[GMAC_PHY_IF]; /* the descriptor which sw can fill */
++ unsigned int tx_desc_tail[GMAC_PHY_IF]; /* the descriptor which is not cleaned yet */
++};
++
++
++struct reg_ioctl_data {
++ unsigned int reg_addr; /* the register address */
++ unsigned int val_in; /* data write to the register */
++ unsigned int val_out; /* data read from the register */
++};
++
++#ifdef CONFIG_SL2312_MPAGE
++typedef struct tx_data_t {
++ int freeable; // 1 when it's skb. it can be freed in tx interrupt handler
++ struct sk_buff* skb; // skb
++ int desc_in_use; // 1 when the desc is in use. 0 when desc is available.
++ long end_seq; // to find out packets are in seq.
++ // so this value is the seq of next packet.
++} tx_data;
++#endif
++
++/*************************************************************
++ * Global Variable
++ *************************************************************/
++struct semaphore sem_gmac; /* semaphore for share pins issue */
++
++/*************************************************************
++ * Static Global Variable
++ *************************************************************/
++// static unsigned int MAC_BASE_ADDR = GMAC0_BASE;
++static unsigned int gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE};
++static unsigned int gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1};
++static struct net_device *gmac_dev[GMAC_PHY_IF];
++
++static unsigned int FLAG_SWITCH=0; /* if 1-->switch chip presented. if 0-->switch chip unpresented */
++static unsigned int flow_control_enable[GMAC_PHY_IF] = {1,1};
++static unsigned int pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN};
++static unsigned int tx_desc_virtual_base[GMAC_PHY_IF];
++static unsigned int rx_desc_virtual_base[GMAC_PHY_IF];
++static unsigned int full_duplex = 1;
++static unsigned int speed = 1;
++#ifdef CONFIG_SL2312_MPAGE
++static tx_data tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
++#else
++static struct sk_buff *tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
++#endif
++static struct sk_buff *rx_skb[GMAC_PHY_IF][RX_DESC_NUM];
++static unsigned int tx_desc_start_adr[GMAC_PHY_IF];
++static unsigned int rx_desc_start_adr[GMAC_PHY_IF];
++static unsigned char eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25};
++static unsigned char eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe};
++static unsigned int next_tick = 3 * HZ;
++
++static unsigned int phy_addr[GMAC_PHY_IF] = {0x01,0x02}; /* define PHY address */
++
++DECLARE_WAIT_QUEUE_HEAD(gmac_queue);
++//static wait_queue_t wait;
++
++struct gmac_conf VLAN_conf[] = {
++#ifdef CONFIG_ADM_6999
++ { (struct net_device *)0,0x7F,1 },
++ { (struct net_device *)0,0x80,2 }
++#endif
++#ifdef CONFIG_ADM_6996
++ { (struct net_device *)0,0x0F,1 },
++ { (struct net_device *)0,0x10,2 }
++#endif
++};
++
++#define NUM_VLAN_IF (sizeof(VLAN_conf)/sizeof(struct gmac_conf))
++
++
++/************************************************/
++/* GMAC function declare */
++/************************************************/
++
++unsigned int mii_read(unsigned char phyad,unsigned char regad);
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
++static void gmac_set_phy_status(struct net_device *dev);
++static void gmac_get_phy_status(struct net_device *dev);
++static int gmac_phy_thread (void *data);
++static int gmac_set_mac_address(struct net_device *dev, void *addr);
++static void gmac_tx_timeout(struct net_device *dev);
++static void gmac_tx_packet_complete(struct net_device *dev);
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static void gmac_set_rx_mode(struct net_device *dev);
++static void gmac_rx_packet(struct net_device *dev);
++static int gmac_open (struct net_device *dev);
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++
++static unsigned int gmac_get_dev_index(struct net_device *dev);
++static unsigned int gmac_select_interface(struct net_device *dev);
++
++#ifdef CONFIG_SL2312_MPAGE
++int printk_all(int dev_index, struct gmac_private* tp);
++#endif
++
++/****************************************/
++/* SPI Function Declare */
++/****************************************/
++void SPI_write(unsigned char addr,unsigned int value);
++unsigned int SPI_read(unsigned char table,unsigned char addr);
++void SPI_write_bit(char bit_EEDO);
++unsigned int SPI_read_bit(void);
++void SPI_default(void);
++void SPI_reset(unsigned char rstype,unsigned char port_cnt);
++void SPI_pre_st(void);
++void SPI_CS_enable(unsigned char enable);
++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
++void SPI_Set_tag(unsigned int port,unsigned tag);
++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
++unsigned int SPI_Get_PVID(unsigned int port);
++void SPI_mac_lock(unsigned int port, unsigned char lock);
++void SPI_get_port_state(unsigned int port);
++void SPI_port_enable(unsigned int port,unsigned char enable);
++unsigned int SPI_get_identifier(void);
++void SPI_get_status(unsigned int port);
++
++/****************************************/
++/* VLAN Function Declare */
++/****************************************/
++int getVLANfromdev (struct net_device *dev );
++struct net_device * getdevfromVLAN( int VID);
++
++
++
++/************************************************/
++/* function body */
++/************************************************/
++#if 0
++void hw_memcpy(void *to,const void *from,unsigned long n)
++{
++ writel(from,SL2312_DRAM_CTRL_BASE+0x20); /* set source address */
++ writel(to,SL2312_DRAM_CTRL_BASE+0x24); /* set destination address */
++ writel(n,SL2312_DRAM_CTRL_BASE+0x28); /* set byte count */
++ writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c);
++ while (readl(SL2312_DRAM_CTRL_BASE+0x2c));
++}
++#endif
++
++static unsigned int gmac_read_reg(unsigned int addr)
++{
++ unsigned int reg_val;
++// unsigned int flags;
++// spinlock_t lock;
++
++// spin_lock_irqsave(&lock, flags);
++ reg_val = readl(addr); // Gary Chen
++// spin_unlock_irqrestore(&lock, flags);
++ return (reg_val);
++}
++
++static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask)
++{
++ unsigned int reg_val;
++ //unsigned int *addr;
++// unsigned int flags;
++// spinlock_t lock;
++
++// spin_lock_irqsave(&lock, flags);
++ reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask);
++ writel(reg_val,addr);
++// spin_unlock_irqrestore(&lock, flags);
++ return;
++}
++
++
++static void gmac_sw_reset(struct net_device *dev)
++{
++ unsigned int index;
++ unsigned int reg_val;
++
++ index = gmac_get_dev_index(dev);
++ if (index==0)
++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020; /* GMAC0 S/W reset */
++ else
++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040; /* GMAC1 S/W reset */
++
++ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c);
++ return;
++}
++
++static void gmac_get_mac_address(void)
++{
++#ifdef CONFIG_MTD
++ extern int get_vlaninfo(vlaninfo* vlan);
++ static vlaninfo vlan[2];
++
++ if (get_vlaninfo(&vlan[0]))
++ {
++ memcpy(eth0_mac,vlan[0].mac,6);
++ VLAN_conf[0].vid = vlan[0].vlanid;
++ VLAN_conf[0].portmap = vlan[0].vlanmap;
++ memcpy(eth1_mac,vlan[1].mac,6);
++ VLAN_conf[1].vid = vlan[1].vlanid;
++ VLAN_conf[1].portmap = vlan[1].vlanmap;
++ }
++#else
++ unsigned int reg_val;
++
++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
++ eth0_mac[4] = (reg_val & 0xff00) >> 8;
++ eth0_mac[5] = reg_val & 0x00ff;
++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
++ eth1_mac[4] = (reg_val & 0xff00) >> 8;
++ eth1_mac[5] = reg_val & 0x00ff;
++#endif
++ return;
++}
++
++static unsigned int gmac_get_dev_index(struct net_device *dev)
++{
++ unsigned int i;
++
++ /* get device index number */
++ for (i=0;i<GMAC_PHY_IF;i++)
++ {
++ if (gmac_dev[i]==dev)
++ {
++ return(i);
++ }
++ }
++ return (0xff);
++}
++
++static unsigned int gmac_select_interface(struct net_device *dev)
++{
++ unsigned int index;
++
++ index = gmac_get_dev_index(dev);
++ // MAC_BASE_ADDR = gmac_base_addr[index]; // Gary Chen
++ return (index);
++}
++
++
++static void gmac_dump_register(struct net_device *dev)
++{
++#if 0
++ unsigned int i,val,index;
++
++ index = gmac_select_interface(dev);
++
++ printk("========== GMAC%d ==========\n",index);
++ for (i=0;i<=0x7c;i=i+4)
++ {
++ val = gmac_read_reg(gmac_base_addr[index] + i);
++ printk("offset = %08x value = %08x\n",i,val);
++ }
++ for (i=0xff00;i<=0xff7c;i=i+4)
++ {
++ val = gmac_read_reg(gmac_base_addr[index] + i);
++ printk("offset = %08x value = %08x\n",i,val);
++ }
++#endif
++}
++
++static int gmac_init_chip(struct net_device *dev)
++{
++ GMAC_RBNR_T rbnr_val,rbnr_mask;
++ GMAC_CONFIG2_T config2_val;
++ GMAC_CONFIG0_T config0,config0_mask;
++ GMAC_CONFIG1_T config1;
++ struct sockaddr sock;
++ unsigned int status;
++ unsigned int phy_mode;
++ unsigned int index;
++
++ index = gmac_get_dev_index(dev);
++
++ /* set GMAC RMII mode */
++ if (index==0)
++ phy_mode = 0; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
++ else
++ phy_mode = 2; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
++
++ /* set PHY operation mode */
++ status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1);
++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f);
++
++ /* set station MAC address1 and address2 */
++ if (index==0)
++ memcpy(&sock.sa_data[0],&eth0_mac[0],6);
++ else
++ memcpy(&sock.sa_data[0],&eth1_mac[0],6);
++ gmac_set_mac_address(dev,(void *)&sock);
++
++ /* set RX_FLTR register to receive all multicast packet */
++ gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f);
++ //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f);
++
++ /* set per packet buffer size */
++ config1.bits32 = 0;
++ config1.bits.buf_size = 11; /* buffer size = 2048-byte */
++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f);
++
++ /* set flow control threshold */
++ config2_val.bits32 = 0;
++ config2_val.bits.set_threshold = RX_DESC_NUM/4;
++ config2_val.bits.rel_threshold = RX_DESC_NUM*3/4;
++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff);
++
++ /* init remaining buffer number register */
++ rbnr_val.bits32 = 0;
++ rbnr_val.bits.buf_remain = RX_DESC_NUM;
++ rbnr_mask.bits32 = 0;
++ rbnr_mask.bits.buf_remain = 0xffff;
++ gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32);
++
++ /* disable TX/RX and disable internal loop back */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.max_len = 2;
++ if (flow_control_enable[index]==1)
++ {
++ config0.bits.tx_fc_en = 1; /* enable tx flow control */
++ config0.bits.rx_fc_en = 1; /* enable rx flow control */
++ printk("Enable MAC Flow Control...\n");
++ }
++ else
++ {
++ config0.bits.tx_fc_en = 0; /* disable tx flow control */
++ config0.bits.rx_fc_en = 0; /* disable rx flow control */
++ printk("Disable MAC Flow Control...\n");
++ }
++ config0.bits.dis_rx = 1; /* disable rx */
++ config0.bits.dis_tx = 1; /* disable tx */
++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
++ config0.bits.inv_rx_clk = 0;
++ config0.bits.rising_latch = 1;
++ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */
++ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */
++
++ config0_mask.bits.max_len = 7;
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ config0_mask.bits.loop_back = 1;
++ config0_mask.bits.inv_rx_clk = 1;
++ config0_mask.bits.rising_latch = 1;
++ config0_mask.bits.ipv4_tss_rx_en = 1;
++ config0_mask.bits.ipv6_tss_rx_en = 1;
++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++
++ return (0);
++}
++
++static void gmac_enable_tx_rx(struct net_device *dev)
++{
++ GMAC_CONFIG0_T config0,config0_mask;
++ int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 0; /* enable rx */
++ config0.bits.dis_tx = 0; /* enable tx */
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++}
++
++static void gmac_disable_tx_rx(struct net_device *dev)
++{
++ GMAC_CONFIG0_T config0,config0_mask;
++ int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 1; /* disable rx */
++ config0.bits.dis_tx = 1; /* disable tx */
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++}
++
++#ifdef CONFIG_SL_NAPI
++static int gmac_rx_poll_ga(struct net_device *dev, int *budget)
++{
++ struct gmac_private *tp = dev->priv;
++ struct sk_buff *skb;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
++ GMAC_DESCRIPTOR_T *rx_desc;
++ unsigned int pkt_size;
++ unsigned int desc_count;
++ unsigned int vid;
++// unsigned int priority;
++ unsigned int own;
++ unsigned int good_frame = 0;
++ unsigned int index;
++ unsigned int dev_index;
++ int work = 0;
++ int work_done = 0;
++ int quota = min(dev->quota, *budget);
++
++ dev_index = gmac_select_interface(dev);
++
++ for (;;)
++ {
++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
++ if (own == CPU) /* check owner bit */
++ {
++ rx_desc = tp->rx_cur_desc;
++#if (GMAC_DEBUG==1)
++ /* check error interrupt */
++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
++ {
++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
++ }
++#endif
++ /* get frame information from the first descriptor of the frame */
++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
++#if (GMAC_DEBUG==1)
++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
++#endif
++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
++ if (vid == 0)
++ {
++ vid = 1; /* default vlan */
++ }
++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
++
++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
++ {
++ tp->stats.rx_bytes += pkt_size;
++ tp->stats.rx_packets++;
++ good_frame = 1;
++ }
++ else
++ {
++ tp->stats.rx_errors++;
++ good_frame = 0;
++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
++ }
++ }
++ else
++ {
++ work_done = 1;
++ break; /* Rx process is completed */
++ }
++
++ if (good_frame == 1)
++ {
++ /* get rx skb buffer index */
++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ if (rx_skb[dev_index][index])
++ {
++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
++ rx_skb[dev_index][index]->dev = dev;
++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
++ skb_put(rx_skb[dev_index][index],pkt_size);
++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
++ netif_rx(rx_skb[dev_index][index]); /* socket rx */
++ dev->last_rx = jiffies;
++
++ /* allocate rx skb buffer */
++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__);
++ }
++ rx_skb[dev_index][index] = skb;
++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
++ }
++ else
++ {
++ printk("%s::rx skb index error !\n",__func__);
++ }
++ }
++
++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
++ /* point to next rx descriptor */
++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
++
++ /* release buffer to Remaining Buffer Number Register */
++ if (flow_control_enable[dev_index] ==1)
++ {
++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
++ }
++
++ if (work++ >= quota )
++ {
++ break;
++ }
++ }
++
++ /* if RX DMA process is stoped , restart it */
++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
++ if (rxdma_busy.bits.rd_busy == 0)
++ {
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ }
++
++ dev->quota -= work;
++ *budget -= work;
++ if (work_done==1)
++ {
++ /* Receive descriptor is empty now */
++ netif_rx_complete(dev);
++ /* enable receive interrupt */
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */
++ return 0;
++ }
++ else
++ {
++ return -1;
++ }
++}
++
++static int gmac_rx_poll_gb(struct net_device *dev, int *budget)
++{
++ struct gmac_private *tp = dev->priv;
++ struct sk_buff *skb;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
++ GMAC_DESCRIPTOR_T *rx_desc;
++ unsigned int pkt_size;
++ unsigned int desc_count;
++ unsigned int vid;
++// unsigned int priority;
++ unsigned int own;
++ unsigned int good_frame = 0;
++ unsigned int index;
++ unsigned int dev_index;
++ int work = 0;
++ int work_done = 0;
++ int quota = min(dev->quota, *budget);
++
++ dev_index = gmac_select_interface(dev);
++
++ for (;;)
++ {
++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
++ if (own == CPU) /* check owner bit */
++ {
++ rx_desc = tp->rx_cur_desc;
++#if (GMAC_DEBUG==1)
++ /* check error interrupt */
++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
++ {
++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
++ }
++#endif
++ /* get frame information from the first descriptor of the frame */
++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
++#if (GMAC_DEBUG==1)
++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
++#endif
++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
++ if (vid == 0)
++ {
++ vid = 1; /* default vlan */
++ }
++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
++
++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
++ {
++ tp->stats.rx_bytes += pkt_size;
++ tp->stats.rx_packets++;
++ good_frame = 1;
++ }
++ else
++ {
++ tp->stats.rx_errors++;
++ good_frame = 0;
++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
++ }
++ }
++ else
++ {
++ work_done = 1;
++ break; /* Rx process is completed */
++ }
++
++ if (good_frame == 1)
++ {
++ /* get rx skb buffer index */
++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ if (rx_skb[dev_index][index])
++ {
++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
++ rx_skb[dev_index][index]->dev = dev;
++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
++ skb_put(rx_skb[dev_index][index],pkt_size);
++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
++ netif_rx(rx_skb[dev_index][index]); /* socket rx */
++ dev->last_rx = jiffies;
++
++ /* allocate rx skb buffer */
++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__);
++ }
++ rx_skb[dev_index][index] = skb;
++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
++ }
++ else
++ {
++ printk("%s::rx skb index error !\n",__func__);
++ }
++ }
++
++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
++ /* point to next rx descriptor */
++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
++
++ /* release buffer to Remaining Buffer Number Register */
++ if (flow_control_enable[dev_index] ==1)
++ {
++// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
++ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
++ }
++
++ if (work++ >= quota )
++ {
++ break;
++ }
++ }
++
++ /* if RX DMA process is stoped , restart it */
++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
++ if (rxdma_busy.bits.rd_busy == 0)
++ {
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ }
++
++ dev->quota -= work;
++ *budget -= work;
++ if (work_done==1)
++ {
++ /* Receive descriptor is empty now */
++ netif_rx_complete(dev);
++ /* enable receive interrupt */
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */
++ return 0;
++ }
++ else
++ {
++ return -1;
++ }
++}
++
++#endif
++
++static void gmac_rx_packet(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ struct sk_buff *skb;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
++ GMAC_DESCRIPTOR_T *rx_desc;
++ unsigned int pkt_size;
++ unsigned int desc_count;
++ unsigned int vid;
++// unsigned int priority;
++ unsigned int own;
++ unsigned int good_frame = 0;
++ unsigned int i,index;
++ unsigned int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ for (i=0;i<256;i++)
++ {
++ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
++ if (own == CPU) /* check owner bit */
++ {
++ rx_desc = tp->rx_cur_desc;
++#if (GMAC_DEBUG==1)
++ /* check error interrupt */
++ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
++ {
++ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
++ }
++#endif
++ /* get frame information from the first descriptor of the frame */
++ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
++#if (GMAC_DEBUG==1)
++ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
++#endif
++ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
++ if (vid == 0)
++ {
++ vid = 1; /* default vlan */
++ }
++ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
++
++ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
++ {
++ tp->stats.rx_bytes += pkt_size;
++ tp->stats.rx_packets++;
++ good_frame = 1;
++ }
++ else
++ {
++ tp->stats.rx_errors++;
++ good_frame = 0;
++ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
++ }
++ }
++ else
++ {
++ break; /* Rx process is completed */
++ }
++
++ if (good_frame == 1)
++ {
++ /* get rx skb buffer index */
++ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ if (rx_skb[dev_index][index])
++ {
++ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
++ rx_skb[dev_index][index]->dev = dev;
++ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
++ skb_put(rx_skb[dev_index][index],pkt_size);
++ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
++ netif_rx(rx_skb[dev_index][index]); /* socket rx */
++ dev->last_rx = jiffies;
++
++ /* allocate rx skb buffer */
++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__);
++ }
++ rx_skb[dev_index][index] = skb;
++ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
++ }
++ else
++ {
++ printk("%s::rx skb index error !\n",__func__);
++ }
++ }
++
++ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
++ /* point to next rx descriptor */
++ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
++
++ /* release buffer to Remaining Buffer Number Register */
++ if (flow_control_enable[dev_index] ==1)
++ {
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
++ }
++ }
++
++ /* if RX DMA process is stoped , restart it */
++ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
++ if (rxdma_busy.bits.rd_busy == 0)
++ {
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ }
++}
++
++#ifdef CONFIG_SL2312_MPAGE
++static inline void free_tx_buf(int dev_index, int desc_index)
++{
++ if (tx_skb[dev_index][desc_index].freeable &&
++ tx_skb[dev_index][desc_index].skb) {
++ struct sk_buff* skb = tx_skb[dev_index][desc_index].skb;
++ //printk("free_skb %x, len %d\n", skb, skb->len);
++#ifdef CONFIG_TXINT_DISABLE
++ dev_kfree_skb(skb);
++#else
++ dev_kfree_skb_irq(skb);
++#endif
++ tx_skb[dev_index][desc_index].skb = 0;
++ }
++}
++
++#ifdef CONFIG_TXINT_DISABLE
++static void gmac_tx_packet_complete(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc, *next_desc;
++ unsigned int desc_cnt=0;
++ unsigned int i,index,dev_index;
++ unsigned int tx_current_descriptor = 0;
++ // int own_dma = 0;
++
++ dev_index = gmac_select_interface(dev);
++
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) {
++ free_tx_buf(dev_index, index);
++ tx_skb[dev_index][index].desc_in_use = 0;
++ }
++ next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++
++ for (;;) {
++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
++ if (next_desc == tx_hw_complete_desc)
++ break;
++ if (next_desc->frame_ctrl.bits_tx_in.own == CPU) {
++ if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) {
++ tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count;
++ tp->stats.tx_packets ++;
++ } else {
++ tp->stats.tx_errors++;
++ }
++ desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count;
++ for (i=1; i<desc_cnt; i++) {
++ /* get tx skb buffer index */
++ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ next_desc->frame_ctrl.bits_tx_in.own = CPU;
++ free_tx_buf(dev_index, index);
++ tx_skb[dev_index][index].desc_in_use = 0;
++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
++ /* release Tx descriptor to CPU */
++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ }
++ /* get tx skb buffer index */
++ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ /* free skb buffer */
++ next_desc->frame_ctrl.bits_tx_in.own = CPU;
++ free_tx_buf(dev_index, index);
++ tx_skb[dev_index][index].desc_in_use = 0;
++ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
++ tp->tx_finished_desc = next_desc;
++// printk("finish tx_desc index %d\n", index);
++ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ }
++ else
++ break;
++ }
++ if (netif_queue_stopped(dev))
++ {
++ netif_wake_queue(dev);
++ }
++
++}
++#else
++static void gmac_tx_packet_complete(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc;
++ unsigned int desc_cnt=0;
++ unsigned int i,index,dev_index;
++ unsigned int tx_current_descriptor = 0;
++ // int own_dma = 0;
++
++ dev_index = gmac_select_interface(dev);
++
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++
++ /* check tx status and accumulate tx statistics */
++ for (;;)
++ {
++
++ for (i=0;i<1000;i++)
++ {
++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
++ if ( ((tx_current_descriptor & 0x00000003)==0x00000003) || /* only one descriptor */
++ ((tx_current_descriptor & 0x00000003)==0x00000001) ) /* the last descriptor */
++ {
++ break;
++ }
++ udelay(1);
++ }
++ if (i==1000)
++ {
++// gmac_dump_register(dev);
++// printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
++// printk_all(dev_index, tp);
++ continue;
++ }
++
++ /* get tx H/W completed descriptor virtual address */
++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
++// tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
++ if (tp->tx_finished_desc == tx_hw_complete_desc ) // ||
++ //tx_skb[dev_index][index].desc_in_use ) /* complete tx processing */
++ {
++ break;
++ }
++
++ for (;;)
++ {
++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
++ {
++ #if (GMAC_DEBUG==1)
++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
++ {
++ printk("%s::Descriptor Processing Error !!!\n",__func__);
++ }
++ #endif
++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
++ {
++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
++ tp->stats.tx_packets ++;
++ }
++ else
++ {
++ tp->stats.tx_errors++;
++ }
++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
++ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */
++ {
++ /* get tx skb buffer index */
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
++ free_tx_buf(dev_index, index);
++ tx_skb[dev_index][index].desc_in_use = 0;
++ /* release Tx descriptor to CPU */
++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ }
++ /* get tx skb buffer index */
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ /* free skb buffer */
++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
++ free_tx_buf(dev_index, index);
++ tx_skb[dev_index][index].desc_in_use = 0;
++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++
++ if (tp->tx_finished_desc == tx_hw_complete_desc )
++ {
++ break;
++ }
++ }
++ else
++ {
++ break;
++ }
++ }
++ }
++
++ if (netif_queue_stopped(dev))
++ {
++ netif_wake_queue(dev);
++ }
++
++}
++#endif
++#else
++
++static void gmac_tx_packet_complete(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ GMAC_DESCRIPTOR_T *tx_hw_complete_desc;
++ unsigned int desc_cnt=0;
++ unsigned int i,index,dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* get tx H/W completed descriptor virtual address */
++ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
++ /* check tx status and accumulate tx statistics */
++ for (;;)
++ {
++ if (tp->tx_finished_desc == tx_hw_complete_desc) /* complete tx processing */
++ {
++ break;
++ }
++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
++ {
++#if (GMAC_DEBUG==1)
++ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
++ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
++ {
++ printk("%s::Descriptor Processing Error !!!\n",__func__);
++ }
++#endif
++ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
++ {
++ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
++ tp->stats.tx_packets ++;
++ }
++ else
++ {
++ tp->stats.tx_errors++;
++ }
++ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
++ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */
++ {
++ /* get tx skb buffer index */
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ /* free skb buffer */
++ if (tx_skb[dev_index][index])
++ {
++ dev_kfree_skb_irq(tx_skb[dev_index][index]);
++ }
++ /* release Tx descriptor to CPU */
++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
++ }
++ /* get tx skb buffer index */
++ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ /* free skb buffer */
++ if (tx_skb[dev_index][index])
++ {
++ dev_kfree_skb_irq(tx_skb[dev_index][index]);
++ }
++ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ }
++ }
++
++ if (netif_queue_stopped(dev))
++ {
++ netif_wake_queue(dev);
++ }
++
++}
++
++
++#endif
++
++#if 0
++static void gmac_weird_interrupt(struct net_device *dev)
++{
++ gmac_dump_register(dev);
++}
++#endif
++
++/* The interrupt handler does all of the Rx thread work and cleans up
++ after the Tx thread. */
++static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
++{
++ struct net_device *dev = (struct net_device *)dev_instance;
++ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
++// GMAC_TXDMA_FIRST_DESC_T txdma_busy;
++// GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ GMAC_DMA_STATUS_T status;
++ unsigned int i,dev_index;
++ int handled = 0;
++
++ dev_index = gmac_select_interface(dev);
++
++ handled = 1;
++
++#ifdef CONFIG_SL_NAPI
++ disable_irq(gmac_irq[dev_index]); /* disable GMAC interrupt */
++
++ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); /* read DMA status */
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); /* clear DMA status */
++
++ if (status.bits.rx_overrun == 1)
++ {
++ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR));
++ gmac_dump_register(dev);
++ /* if RX DMA process is stoped , restart it */
++ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ;
++ if (rxdma_busy.bits.rd_busy == 0)
++ {
++ /* restart Rx DMA process */
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ }
++ }
++
++ /* process rx packet */
++ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1)))
++ {
++ if (likely(netif_rx_schedule_prep(dev)))
++ {
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000); /* disable rx interrupt */
++ __netif_rx_schedule(dev);
++ }
++ }
++#ifndef CONFIG_TXINT_DISABLE
++ /* process tx packet */
++ if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1)))
++ {
++ gmac_tx_packet_complete(dev);
++ }
++#endif
++
++ enable_irq(gmac_irq[dev_index]); /* enable GMAC interrupt */
++ return IRQ_RETVAL(handled);
++#endif
++
++ /* disable GMAC interrupt */
++ disable_irq(gmac_irq[dev_index]);
++ for (i=0;i<MAX_ISR_WORK;i++)
++ {
++ /* read DMA status */
++ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS);
++int_status = status.bits32;
++ /* clear DMA status */
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32);
++
++ if ((status.bits32 & 0xffffc000)==0)
++ {
++ break;
++ }
++
++ if (status.bits.rx_overrun == 1)
++ {
++ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR));
++ gmac_dump_register(dev);
++ /* if RX DMA process is stoped , restart it */
++ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ;
++ if (rxdma_busy.bits.rd_busy == 0)
++ {
++ /* restart Rx DMA process */
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ }
++ }
++
++ /* receive rx interrupt */
++ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1)))
++ {
++ gmac_rx_packet(dev);
++// gmac_tx_packet_complete(dev);
++ }
++
++ /* receive tx interrupt */
++ // if (netif_running(dev) && (status.bits.ts_finish==1))
++#ifndef CONFIG_TXINT_DISABLE
++ if (netif_running(dev) && ((status.bits.ts_eofi==1)||
++ (status.bits.ts_finish==1)))
++ {
++ gmac_tx_packet_complete(dev);
++ }
++#endif
++ /* check uncommon events */
++/* if ((status.bits32 & 0x632fc000)!=0)
++ {
++ printk("%s::DMA Status = %08x \n",__func__,status.bits32);
++ gmac_weird_interrupt(dev);
++ }
++*/
++ }
++
++ /* enable GMAC interrupt */
++ enable_irq(gmac_irq[dev_index]);
++ //printk("gmac_interrupt complete!\n\n");
++ return IRQ_RETVAL(handled);
++}
++
++static void gmac_hw_start(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ GMAC_TXDMA_CURR_DESC_T tx_desc;
++ GMAC_RXDMA_CURR_DESC_T rx_desc;
++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ GMAC_DMA_STATUS_T dma_status,dma_status_mask;
++ int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* program TxDMA Current Descriptor Address register for first descriptor */
++ tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma);
++ tx_desc.bits.eofie = 1;
++ tx_desc.bits.sof_eof = 0x03;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff);
++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff); /* tx next descriptor address */
++
++ /* program RxDMA Current Descriptor Address register for first descriptor */
++ rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma);
++ rx_desc.bits.eofie = 1;
++ rx_desc.bits.sof_eof = 0x03;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff);
++ gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff); /* rx next descriptor address */
++
++ /* enable GMAC interrupt & disable loopback */
++ dma_status.bits32 = 0;
++ dma_status.bits.loop_back = 0; /* disable DMA loop-back mode */
++// dma_status.bits.m_tx_fail = 1;
++ dma_status.bits.m_cnt_full = 1;
++ dma_status.bits.m_rx_pause_on = 1;
++ dma_status.bits.m_tx_pause_on = 1;
++ dma_status.bits.m_rx_pause_off = 1;
++ dma_status.bits.m_tx_pause_off = 1;
++ dma_status.bits.m_rx_overrun = 1;
++ dma_status.bits.m_link_change = 1;
++ dma_status_mask.bits32 = 0;
++ dma_status_mask.bits.loop_back = 1;
++// dma_status_mask.bits.m_tx_fail = 1;
++ dma_status_mask.bits.m_cnt_full = 1;
++ dma_status_mask.bits.m_rx_pause_on = 1;
++ dma_status_mask.bits.m_tx_pause_on = 1;
++ dma_status_mask.bits.m_rx_pause_off = 1;
++ dma_status_mask.bits.m_tx_pause_off = 1;
++ dma_status_mask.bits.m_rx_overrun = 1;
++ dma_status_mask.bits.m_link_change = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32);
++
++ /* program tx dma control register */
++ txdma_ctrl.bits32 = 0;
++ txdma_ctrl.bits.td_start = 0; /* start TX DMA transfer */
++ txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */
++ txdma_ctrl.bits.td_chain_mode = 1; /* chain mode */
++ txdma_ctrl.bits.td_prot = 0;
++ txdma_ctrl.bits.td_burst_size = 2; /* DMA burst size for every AHB request */
++ txdma_ctrl.bits.td_bus = 2; /* peripheral bus width */
++ txdma_ctrl.bits.td_endian = 0; /* little endian */
++#ifdef CONFIG_TXINT_DISABLE
++ txdma_ctrl.bits.td_finish_en = 0; /* DMA finish event interrupt disable */
++#else
++ txdma_ctrl.bits.td_finish_en = 1; /* DMA finish event interrupt enable */
++#endif
++ txdma_ctrl.bits.td_fail_en = 1; /* DMA fail interrupt enable */
++ txdma_ctrl.bits.td_perr_en = 1; /* protocol failure interrupt enable */
++ txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */
++ //txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */
++#ifdef CONFIG_TXINT_DISABLE
++ txdma_ctrl.bits.td_eof_en = 0; /* end of frame interrupt disable */
++#else
++ txdma_ctrl.bits.td_eof_en = 1; /* end of frame interrupt enable */
++#endif
++ txdma_ctrl_mask.bits32 = 0;
++ txdma_ctrl_mask.bits.td_start = 1;
++ txdma_ctrl_mask.bits.td_continue = 1;
++ txdma_ctrl_mask.bits.td_chain_mode = 1;
++ txdma_ctrl_mask.bits.td_prot = 15;
++ txdma_ctrl_mask.bits.td_burst_size = 3;
++ txdma_ctrl_mask.bits.td_bus = 3;
++ txdma_ctrl_mask.bits.td_endian = 1;
++ txdma_ctrl_mask.bits.td_finish_en = 1;
++ txdma_ctrl_mask.bits.td_fail_en = 1;
++ txdma_ctrl_mask.bits.td_perr_en = 1;
++ txdma_ctrl_mask.bits.td_eod_en = 1;
++ //txdma_ctrl_mask.bits.td_eod_en = 1;
++ txdma_ctrl_mask.bits.td_eof_en = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
++
++ /* program rx dma control register */
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
++ rxdma_ctrl.bits.rd_chain_mode = 1; /* chain mode */
++ rxdma_ctrl.bits.rd_prot = 0;
++ rxdma_ctrl.bits.rd_burst_size = 2; /* DMA burst size for every AHB request */
++ rxdma_ctrl.bits.rd_bus = 2; /* peripheral bus width */
++ rxdma_ctrl.bits.rd_endian = 0; /* little endian */
++ rxdma_ctrl.bits.rd_finish_en = 1; /* DMA finish event interrupt enable */
++ rxdma_ctrl.bits.rd_fail_en = 1; /* DMA fail interrupt enable */
++ rxdma_ctrl.bits.rd_perr_en = 1; /* protocol failure interrupt enable */
++ rxdma_ctrl.bits.rd_eod_en = 0; /* disable Rx End of Descriptor Interrupt */
++ rxdma_ctrl.bits.rd_eof_en = 1; /* end of frame interrupt enable */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ rxdma_ctrl_mask.bits.rd_chain_mode = 1;
++ rxdma_ctrl_mask.bits.rd_prot = 15;
++ rxdma_ctrl_mask.bits.rd_burst_size = 3;
++ rxdma_ctrl_mask.bits.rd_bus = 3;
++ rxdma_ctrl_mask.bits.rd_endian = 1;
++ rxdma_ctrl_mask.bits.rd_finish_en = 1;
++ rxdma_ctrl_mask.bits.rd_fail_en = 1;
++ rxdma_ctrl_mask.bits.rd_perr_en = 1;
++ rxdma_ctrl_mask.bits.rd_eod_en = 1;
++ rxdma_ctrl_mask.bits.rd_eof_en = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++ return;
++}
++
++static void gmac_hw_stop(struct net_device *dev)
++{
++ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
++ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
++ int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* program tx dma control register */
++ txdma_ctrl.bits32 = 0;
++ txdma_ctrl.bits.td_start = 0;
++ txdma_ctrl.bits.td_continue = 0;
++ txdma_ctrl_mask.bits32 = 0;
++ txdma_ctrl_mask.bits.td_start = 1;
++ txdma_ctrl_mask.bits.td_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
++ /* program rx dma control register */
++ rxdma_ctrl.bits32 = 0;
++ rxdma_ctrl.bits.rd_start = 0; /* stop RX DMA transfer */
++ rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */
++ rxdma_ctrl_mask.bits32 = 0;
++ rxdma_ctrl_mask.bits.rd_start = 1;
++ rxdma_ctrl_mask.bits.rd_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
++}
++
++static int gmac_init_desc_buf(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ struct sk_buff *skb;
++ dma_addr_t tx_first_desc_dma=0;
++ dma_addr_t rx_first_desc_dma=0;
++ dma_addr_t rx_first_buf_dma=0;
++ unsigned int i,index;
++
++ printk("Descriptor buffer init......\n");
++
++ /* get device index number */
++ index = gmac_get_dev_index(dev);
++#ifdef CONFIG_SL2312_MPAGE
++ for (i=0; i<TX_DESC_NUM; i++) {
++ tx_skb[index][i].freeable = 0;
++ tx_skb[index][i].skb = 0;
++ tx_skb[index][i].desc_in_use = 0;
++ tx_skb[index][i].end_seq = 0;
++ }
++#else
++ for (i=0;i<TX_DESC_NUM;i++)
++ {
++ tx_skb[index][i] = NULL;
++ }
++#endif
++ for (i=0;i<RX_DESC_NUM;i++)
++ {
++ rx_skb[index][i] = NULL;
++ }
++
++ /* allocates TX/RX descriptors */
++ tp->tx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma);
++ tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma;
++ memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
++ tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma);
++ rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma;
++ memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
++ tx_desc_start_adr[index] = (unsigned int)tp->tx_desc; /* for tx skb index calculation */
++ rx_desc_start_adr[index] = (unsigned int)tp->rx_desc; /* for rx skb index calculation */
++ printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc);
++ printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc);
++ printk("tx_desc_dma = %08x\n",tp->tx_desc_dma);
++ printk("rx_desc_dma = %08x\n",tp->rx_desc_dma);
++
++ if (tp->tx_desc==0x00 || tp->rx_desc==0x00)
++ {
++ free_irq(dev->irq, dev);
++
++ if (tp->tx_desc)
++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma);
++ if (tp->rx_desc)
++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma);
++ return -ENOMEM;
++ }
++
++ /* TX descriptors initial */
++ tp->tx_cur_desc = tp->tx_desc; /* virtual address */
++ tp->tx_finished_desc = tp->tx_desc; /* virtual address */
++ tx_first_desc_dma = tp->tx_desc_dma; /* physical address */
++ for (i = 1; i < TX_DESC_NUM; i++)
++ {
++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */
++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; /* set tx buffer size for descriptor */
++ tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */
++ tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b;
++ tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */
++ }
++ /* the last descriptor will point back to first descriptor */
++ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU;
++ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
++ tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b;
++ tp->tx_desc = tp->tx_cur_desc;
++ tp->tx_desc_dma = tx_first_desc_dma;
++
++ /* RX descriptors initial */
++ tp->rx_cur_desc = tp->rx_desc; /* virtual address */
++ rx_first_desc_dma = tp->rx_desc_dma; /* physical address */
++ for (i = 1; i < RX_DESC_NUM; i++)
++ {
++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__);
++ }
++ rx_skb[index][i-1] = skb;
++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; /* set owner bit to DMA */
++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */
++ tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE; /* point to next buffer address */
++ tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */
++ tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b;
++ tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */
++ }
++ /* the last descriptor will point back to first descriptor */
++ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__);
++ }
++ rx_skb[index][i-1] = skb;
++ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
++ tp->rx_desc->frame_ctrl.bits_rx.own = DMA;
++ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE;
++ tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b;
++ tp->rx_desc = tp->rx_cur_desc;
++ tp->rx_desc_dma = rx_first_desc_dma;
++ tp->rx_bufs_dma = rx_first_buf_dma;
++
++ for (i=0; i<GMAC_PHY_IF; i++) {
++ tp->tx_desc_hdr[i] = 0;
++ tp->tx_desc_tail[i] = 0;
++ }
++ return (0);
++}
++
++static int gmac_clear_counter (struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ unsigned int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++// tp = gmac_dev[index]->priv;
++ /* clear counter */
++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
++ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
++ tp->stats.tx_bytes = 0;
++ tp->stats.tx_packets = 0;
++ tp->stats.tx_errors = 0;
++ tp->stats.rx_bytes = 0;
++ tp->stats.rx_packets = 0;
++ tp->stats.rx_errors = 0;
++ tp->stats.rx_dropped = 0;
++ return (0);
++}
++
++static int gmac_open (struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ int retval;
++
++ gmac_select_interface(dev);
++
++ /* chip reset */
++ gmac_sw_reset(dev);
++
++ /* allocates tx/rx descriptor and buffer memory */
++ gmac_init_desc_buf(dev);
++
++ /* get mac address from FLASH */
++ gmac_get_mac_address();
++
++ /* set PHY register to start autonegition process */
++ gmac_set_phy_status(dev);
++
++ /* GMAC initialization */
++ if (gmac_init_chip(dev))
++ {
++ printk (KERN_ERR "GMAC init fail\n");
++ }
++
++ /* start DMA process */
++ gmac_hw_start(dev);
++
++ /* enable tx/rx register */
++ gmac_enable_tx_rx(dev);
++
++ /* clear statistic counter */
++ gmac_clear_counter(dev);
++
++ netif_start_queue (dev);
++
++ /* hook ISR */
++ retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev);
++ if (retval)
++ return retval;
++
++ if(!FLAG_SWITCH)
++ {
++ init_waitqueue_head (&tp->thr_wait);
++ init_completion(&tp->thr_exited);
++
++ tp->time_to_die = 0;
++ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
++ if (tp->thr_pid < 0)
++ {
++ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
++ }
++ }
++ return (0);
++}
++
++static int gmac_close(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ unsigned int i,dev_index;
++ unsigned int ret;
++
++ dev_index = gmac_get_dev_index(dev);
++
++ /* stop tx/rx packet */
++ gmac_disable_tx_rx(dev);
++
++ /* stop the chip's Tx and Rx DMA processes */
++ gmac_hw_stop(dev);
++
++ netif_stop_queue(dev);
++
++ /* disable interrupts by clearing the interrupt mask */
++ synchronize_irq();
++ free_irq(dev->irq,dev);
++
++ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma);
++ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma);
++
++#ifdef CONFIG_SL2312_MPAGE
++// kfree(tx_skb);
++#endif
++
++ for (i=0;i<RX_DESC_NUM;i++)
++ {
++ if (rx_skb[dev_index][i])
++ {
++ dev_kfree_skb(rx_skb[dev_index][i]);
++ }
++ }
++ if(!FLAG_SWITCH)
++ {
++ if (tp->thr_pid >= 0)
++ {
++ tp->time_to_die = 1;
++ wmb();
++ ret = kill_proc (tp->thr_pid, SIGTERM, 1);
++ if (ret)
++ {
++ printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
++ return ret;
++ }
++// wait_for_completion (&tp->thr_exited);
++ }
++ }
++
++ return (0);
++}
++
++#ifdef CONFIG_SL2312_MPAGE
++int printk_all(int dev_index, struct gmac_private* tp)
++{
++ int i=0;
++ unsigned int tx_current_descriptor = 0;
++ int hw_index;
++ int fi;
++ GMAC_DESCRIPTOR_T* tmp_desc;
++
++ GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc;
++ fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ printk("tmp_desc %x, id %d\n", (int)cur_desc, fi);
++
++ tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T);
++ printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc);
++
++ for (i=0; i<TX_DESC_NUM; i++) {
++ printk("**id %4d, hw_index %4d ==> ", fi, hw_index);
++ printk("fc %8x ", tmp_desc->frame_ctrl.bits32);
++ printk("fs %8x ", tmp_desc->flag_status.bits32);
++ printk("fb %8x ", tmp_desc->buf_adr);
++ printk("fd %8x\n", tmp_desc->next_desc.next_descriptor);
++ tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ }
++ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
++ printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
++ printk("%s: interrupt status = %x \n",__func__,int_status);
++ return 0;
++}
++
++int cleanup_desc(int dev_index, struct gmac_private* tp)
++{
++ int i=0;
++ int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
++ GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc;
++
++ for (i=0; i< TX_DESC_NUM; i++)
++ {
++ fill_desc->frame_ctrl.bits_tx_out.own = CPU;
++ fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
++ tx_skb[dev_index][index].desc_in_use = 0;
++ free_tx_buf(dev_index, index);
++ printk("cleanup di %d\n", index);
++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ index++;
++ if (index > TX_DESC_NUM)
++ index = 0;
++ }
++ return 1;
++}
++
++size_t get_available_tx_desc(struct net_device* dev, int dev_index)
++{
++ struct gmac_private *tp = dev->priv;
++ unsigned int desc_hdr = tp->tx_desc_hdr[dev_index];
++ unsigned int desc_tail = tp->tx_desc_tail[dev_index];
++ int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1);
++ if (!available_desc_num) {
++ if (tx_skb[dev_index][desc_hdr].desc_in_use)
++ return 0;
++ else
++ return TX_DESC_NUM;
++ }
++ return available_desc_num;
++}
++
++int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc)
++{
++ int i,index;
++ GMAC_DESCRIPTOR_T* tmp_desc = desc;
++
++ if (n > TX_DESC_NUM)
++ return 0;
++
++ index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
++ for (i=0; i<n; i++)
++ {
++ if (tx_skb[dev_index][index].desc_in_use)
++ {
++ printk("sw desc %d is in use\n", index);
++ /* cleanup all the descriptors to check if DMA still running */
++ return 0;
++ }
++ index++;
++ if (index == TX_DESC_NUM)
++ index = 0;
++ }
++ return 1;
++}
++
++#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
++
++inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb)
++{
++ int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++
++ if (desc->frame_ctrl.bits_tx_in.own == CPU)
++ {
++ tx_skb[dev_index][index].freeable = freeable;
++ if ((sof & 0x01) && skb) {
++ tx_skb[dev_index][index].skb = skb;
++ }
++ else
++ tx_skb[dev_index][index].skb = 0;
++
++ if (sof != 2)
++ tx_skb[dev_index][index].desc_in_use = 1;
++ else
++ tx_skb[dev_index][index].desc_in_use = 0;
++
++ consistent_sync(data, len, PCI_DMA_TODEVICE);
++ desc->buf_adr = (unsigned int)__pa(data);
++ desc->frame_ctrl.bits_tx_out.buffer_size = len;
++ desc->flag_status.bits_tx_flag.frame_count = total_len;
++ desc->next_desc.bits.eofie = 1;
++ desc->next_desc.bits.sof_eof = sof;
++ desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
++ desc->frame_ctrl.bits_tx_out.ip_csum_en = 1; /* TSS IPv4 IP header checksum enable */
++ desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1; /* TSS IPv6 tx enable */
++ desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1; /* TSS TCP checksum enable */
++ desc->frame_ctrl.bits_tx_out.udp_csum_en = 1; /* TSS UDP checksum enable */
++ wmb();
++ desc->frame_ctrl.bits_tx_out.own = ownership;
++// consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
++ }
++ return 0;
++}
++#endif
++
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask;
++ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
++ unsigned int len = skb->len;
++ unsigned int dev_index;
++ static unsigned int pcount = 0;
++#ifdef CONFIG_SL2312_MPAGE
++ GMAC_DESCRIPTOR_T *fill_desc;
++ int snd_pages = skb_shinfo(skb)->nr_frags; /* get number of descriptor */
++ int desc_needed = 1; // for jumbo packet, one descriptor is enough.
++ int header_len = skb->len;
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ int tcp_hdr_len;
++ int data_len;
++ int prv_index;
++ long seq_num;
++ int first_desc_index;
++ int ownership, freeable;
++ int eof;
++ int i=0;
++#endif
++#ifdef CONFIG_TXINT_DISABLE
++ int available_desc_cnt = 0;
++#endif
++
++ dev_index = gmac_select_interface(dev);
++
++#ifdef CONFIG_TXINT_DISABLE
++ available_desc_cnt = get_available_tx_desc(dev, dev_index);
++
++ if (available_desc_cnt < (TX_DESC_NUM >> 2)) {
++ gmac_tx_packet_complete(dev);
++ }
++#endif
++
++#ifdef CONFIG_SL2312_MPAGE
++
++ fill_desc = tp->tx_cur_desc;
++ if(!fill_desc) {
++ printk("cur_desc is NULL!\n");
++ return -1;
++ }
++
++ if (storlink_ctl.recvfile==2)
++ {
++ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
++ }
++
++ if (snd_pages)
++ desc_needed += snd_pages; /* decriptors needed for this large packet */
++
++ if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) {
++ printk("no available desc!\n");
++ gmac_dump_register(dev);
++ printk_all(dev_index, tp);
++ tp->stats.tx_dropped++;
++ if (pcount++ > 10)
++ {
++ for (;;);
++ }
++ return -1;
++ }
++
++ first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++
++ /* check if the tcp packet is in order*/
++ ip_hdr = (struct iphdr*) &(skb->data[14]);
++ tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]);
++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
++ data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
++
++ prv_index = first_desc_index-1;
++ if (prv_index <0)
++ prv_index += TX_DESC_NUM;
++ seq_num = ntohl(tcp_hdr->seq);
++
++ if (snd_pages)
++ {
++ // calculate header length
++ // check fragment total length and header len = skb len - frag len
++ // or parse the header.
++ for (i=0; i<snd_pages; i++) {
++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
++ header_len -= frag->size;
++ }
++ ownership = CPU;
++ freeable = 0;
++ /* fill header into first descriptor */
++ fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0);
++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
++
++ eof = 0;
++ ownership = DMA;
++ for (i=0; i<snd_pages; i++)
++ {
++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
++ int start_pos = frag->page_offset;
++ char* data_buf = page_address(frag->page);
++ int data_size = frag->size;
++ int cur_index;
++
++ if (i == snd_pages-1)
++ {
++ eof=1;
++ freeable = 1;
++ }
++ fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size,
++ len, eof, freeable, ownership, skb);
++ cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++
++ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ }
++ /* pass the ownership of the first descriptor to hardware */
++// disable_irq(gmac_irq[dev_index]);
++ tx_skb[dev_index][first_desc_index].desc_in_use = 1;
++ wmb();
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA;
++// consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
++ tp->tx_cur_desc = fill_desc;
++ dev->trans_start = jiffies;
++// enable_irq(gmac_irq[dev_index]);
++ }
++ else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU )
++ {
++// tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
++// disable_irq(gmac_irq[dev_index]);
++ fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb);
++// enable_irq(gmac_irq[dev_index]);
++ //consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
++ dev->trans_start = jiffies;
++ }
++ else
++ {
++ printk("gmac tx drop!\n");
++ tp->stats.tx_dropped++;
++ return -1;
++ }
++
++#ifdef CONFIG_TXINT_DISABLE
++ tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1);
++#endif
++
++#else
++ if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE))
++ {
++ index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
++ tx_skb[dev_index][index] = skb;
++ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
++ tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data);
++ tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len; /* total frame byte count */
++ tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03; /*only one descriptor*/
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len; /* descriptor byte count */
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0; /* TSS IPv4 IP header checksum enable */
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ; /* TSS IPv6 tx enable */
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0; /* TSS TCP checksum enable */
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0; /* TSS UDP checksum enable */
++ wmb();
++ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; /* set owner bit */
++ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
++ dev->trans_start = jiffies;
++ }
++ else
++ {
++ /* no free tx descriptor */
++ dev_kfree_skb(skb);
++ netif_stop_queue(dev);
++ tp->stats.tx_dropped++;
++ return (-1);
++ }
++#endif
++ /* if TX DMA process is stoped , restart it */
++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
++ if (txdma_busy.bits.td_busy == 0)
++ {
++ /* restart DMA process */
++ tx_ctrl.bits32 = 0;
++ tx_ctrl.bits.td_start = 1;
++ tx_ctrl.bits.td_continue = 1;
++ tx_ctrl_mask.bits32 = 0;
++ tx_ctrl_mask.bits.td_start = 1;
++ tx_ctrl_mask.bits.td_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
++ }
++ return (0);
++}
++
++
++struct net_device_stats * gmac_get_stats(struct net_device *dev)
++{
++ struct gmac_private *tp = dev->priv;
++ unsigned long flags;
++ unsigned int pkt_drop;
++ unsigned int pkt_error;
++ unsigned int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++// if (storlink_ctl.recvfile==3)
++// {
++// printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30));
++// gmac_dump_register(dev);
++// printk_all(0, dev);
++// }
++
++ if (netif_running(dev))
++ {
++ /* read H/W counter */
++ spin_lock_irqsave(&tp->lock,flags);
++ pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
++ pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
++ tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop;
++ tp->stats.rx_errors = tp->stats.rx_errors + pkt_error;
++ spin_unlock_irqrestore(&tp->lock,flags);
++ }
++ return &tp->stats;
++}
++
++static unsigned const ethernet_polynomial = 0x04c11db7U;
++static inline u32 ether_crc (int length, unsigned char *data)
++{
++ int crc = -1;
++ unsigned int i;
++ unsigned int crc_val=0;
++
++ while (--length >= 0) {
++ unsigned char current_octet = *data++;
++ int bit;
++ for (bit = 0; bit < 8; bit++, current_octet >>= 1)
++ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
++ ethernet_polynomial : 0);
++ }
++ crc = ~crc;
++ for (i=0;i<32;i++)
++ {
++ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
++ }
++ return crc_val;
++}
++
++static void gmac_set_rx_mode(struct net_device *dev)
++{
++ GMAC_RX_FLTR_T filter;
++ unsigned int mc_filter[2]; /* Multicast hash filter */
++ int bit_nr;
++ unsigned int i, dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++// printk("%s : dev->flags = %x \n",__func__,dev->flags);
++// dev->flags |= IFF_ALLMULTI; /* temp */
++ filter.bits32 = 0;
++ filter.bits.error = 0;
++ if (dev->flags & IFF_PROMISC)
++ {
++ filter.bits.error = 1;
++ filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0xffffffff;
++ }
++ else if (dev->flags & IFF_ALLMULTI)
++ {
++ filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0xffffffff;
++ }
++ else
++ {
++ struct dev_mc_list *mclist;
++
++ filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0;
++ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
++ {
++ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
++ if (bit_nr < 32)
++ {
++ mc_filter[0] = mc_filter[0] | (1<<bit_nr);
++ }
++ else
++ {
++ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32));
++ }
++ }
++ }
++ filter.bits32 = 0x1f;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RX_FLTR,filter.bits32,0xffffffff);
++
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
++ return;
++}
++
++static int gmac_set_mac_address(struct net_device *dev, void *addr)
++{
++ struct sockaddr *sock;
++ unsigned int reg_val;
++ unsigned int dev_index;
++ unsigned int i;
++
++ dev_index = gmac_select_interface(dev);
++
++ sock = (struct sockaddr *) addr;
++ for (i = 0; i < 6; i++)
++ {
++ dev->dev_addr[i] = sock->sa_data[i];
++ }
++
++ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff);
++ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff);
++ memcpy(&eth0_mac[0],&dev->dev_addr[0],6);
++ printk("Storlink %s address = ",dev->name);
++ printk("%02x",dev->dev_addr[0]);
++ printk("%02x",dev->dev_addr[1]);
++ printk("%02x",dev->dev_addr[2]);
++ printk("%02x",dev->dev_addr[3]);
++ printk("%02x",dev->dev_addr[4]);
++ printk("%02x\n",dev->dev_addr[5]);
++
++ return (0);
++}
++
++static void gmac_tx_timeout(struct net_device *dev)
++{
++ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask;
++ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
++ int dev_index;
++
++ dev_index = gmac_select_interface(dev);
++
++ /* if TX DMA process is stoped , restart it */
++ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
++ if (txdma_busy.bits.td_busy == 0)
++ {
++ /* restart DMA process */
++ tx_ctrl.bits32 = 0;
++ tx_ctrl.bits.td_start = 1;
++ tx_ctrl.bits.td_continue = 1;
++ tx_ctrl_mask.bits32 = 0;
++ tx_ctrl_mask.bits.td_start = 1;
++ tx_ctrl_mask.bits.td_continue = 1;
++ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
++ }
++ netif_wake_queue(dev);
++ return;
++}
++
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ int rc = 0;
++ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
++
++ if (!netif_running(dev))
++ {
++ printk("Before changing the H/W address,please down the device.\n");
++ return -EINVAL;
++ }
++
++ switch (cmd) {
++ case SIOCETHTOOL:
++ break;
++
++ case SIOCSIFHWADDR:
++ gmac_set_mac_address(dev,hwa);
++ break;
++
++ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
++ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */
++ break;
++
++ case SIOCGMIIREG: /* Read the specified MII register. */
++ case SIOCDEVPRIVATE+1:
++ break;
++
++ case SIOCSMIIREG: /* Write the specified MII register */
++ case SIOCDEVPRIVATE+2:
++ break;
++
++ default:
++ rc = -EOPNOTSUPP;
++ break;
++ }
++
++ return rc;
++}
++
++static void gmac_cleanup_module(void)
++{
++ int i;
++
++ for (i=0;i<GMAC_PHY_IF;i++)
++ {
++ unregister_netdev(gmac_dev[i]);
++ }
++ return ;
++}
++
++static int __init gmac_init_module(void)
++{
++ struct gmac_private *tp;
++ struct net_device *dev[GMAC_PHY_IF];
++ unsigned int i;
++
++#ifdef MODULE
++ printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
++#endif
++// init_waitqueue_entry(&wait, current);
++
++ printk("GMAC Init......\n");
++ for(i = 0; i<GMAC_PHY_IF; i++)
++ {
++ dev[i] = alloc_etherdev(sizeof(struct gmac_private));
++ if (dev[i] == NULL)
++ {
++ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
++ return -ENOMEM;
++ }
++ gmac_dev[i] = dev[i];
++
++ SET_MODULE_OWNER(dev[i]);
++
++ tp = dev[i]->priv;
++
++ dev[i]->base_addr = gmac_base_addr[i];
++ dev[i]->irq = gmac_irq[i];
++ dev[i]->open = gmac_open;
++ dev[i]->stop = gmac_close;
++ dev[i]->hard_start_xmit = gmac_start_xmit;
++ dev[i]->get_stats = gmac_get_stats;
++ dev[i]->set_multicast_list = gmac_set_rx_mode;
++ dev[i]->set_mac_address = gmac_set_mac_address;
++ dev[i]->do_ioctl = gmac_netdev_ioctl;
++ dev[i]->tx_timeout = gmac_tx_timeout;
++ dev[i]->watchdog_timeo = TX_TIMEOUT;
++ dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO;
++#ifdef CONFIG_SL_NAPI
++ printk("NAPI driver is enabled.\n");
++ if (i==0)
++ {
++ dev[i]->poll = gmac_rx_poll_ga;
++ dev[i]->weight = 64;
++ }
++ else
++ {
++ dev[i]->poll = gmac_rx_poll_gb;
++ dev[i]->weight = 64;
++ }
++#endif
++
++ if (register_netdev(dev[i]))
++ {
++ gmac_cleanup_module();
++ return(-1);
++ }
++ }
++
++#ifdef CONFIG_SL3516_ASIC
++{
++ unsigned int val;
++
++ /* set GMAC global register */
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
++ val = val | 0x005a0000;
++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
++ writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c);
++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20);
++ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24);
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
++ if((val&(1<<20))==0){ // GMAC1 enable
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
++ val = (val & 0xe7ffffff) | 0x08000000;
++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
++ }
++
++}
++#endif
++
++// printk("%s: dev0=%x dev1=%x \n",__func__,dev[0],dev[1]);
++// FLAG_SWITCH = 0 ;
++// FLAG_SWITCH = SPI_get_identifier();
++// if(FLAG_SWITCH)
++// {
++// printk("Configure ADM699X...\n");
++// SPI_default(); //Add by jason for ADM699X configuration
++// }
++ return (0);
++}
++
++
++module_init(gmac_init_module);
++module_exit(gmac_cleanup_module);
++
++static int gmac_phy_thread (void *data)
++{
++ struct net_device *dev = data;
++ struct gmac_private *tp = dev->priv;
++ unsigned long timeout;
++
++ daemonize("%s", dev->name);
++ allow_signal(SIGTERM);
++// reparent_to_init();
++// spin_lock_irq(&current->sigmask_lock);
++// sigemptyset(&current->blocked);
++// recalc_sigpending(current);
++// spin_unlock_irq(&current->sigmask_lock);
++// strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
++// current->comm[sizeof(current->comm) - 1] = '\0';
++
++ while (1)
++ {
++ timeout = next_tick;
++ do
++ {
++ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
++ } while (!signal_pending (current) && (timeout > 0));
++
++ if (signal_pending (current))
++ {
++// spin_lock_irq(&current->sigmask_lock);
++ flush_signals(current);
++// spin_unlock_irq(&current->sigmask_lock);
++ }
++
++ if (tp->time_to_die)
++ break;
++
++// printk("%s : Polling PHY Status...%x\n",__func__,dev);
++ rtnl_lock ();
++ gmac_get_phy_status(dev);
++ rtnl_unlock ();
++ }
++ complete_and_exit (&tp->thr_exited, 0);
++}
++
++static void gmac_set_phy_status(struct net_device *dev)
++{
++ GMAC_STATUS_T status;
++ unsigned int reg_val;
++ unsigned int i = 0;
++ unsigned int index;
++
++ if (FLAG_SWITCH==1)
++ {
++ return; /* GMAC connects to a switch chip, not PHY */
++ }
++
++ index = gmac_get_dev_index(dev);
++
++ if (index == 0)
++ {
++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
++#ifdef CONFIG_SL3516_ASIC
++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */
++#endif
++ }
++ else
++ {
++// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
++// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
++ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
++#ifdef CONFIG_SL3516_ASIC
++// mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */
++ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
++#endif
++ }
++
++ mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */
++ mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */
++ while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04)
++ {
++ i++;
++ if (i > 30)
++ {
++ break;
++ }
++ msleep(100);
++ }
++ if (i>30)
++ {
++ pre_phy_status[index] = LINK_DOWN;
++ clear_bit(__LINK_STATE_START, &dev->state);
++ netif_stop_queue(dev);
++ storlink_ctl.link = 0;
++ printk("Link Down (%04x) ",reg_val);
++ }
++ else
++ {
++ pre_phy_status[index] = LINK_UP;
++ set_bit(__LINK_STATE_START, &dev->state);
++ netif_wake_queue(dev);
++ storlink_ctl.link = 1;
++ printk("Link Up (%04x) ",reg_val);
++ }
++
++ status.bits32 = 0;
++ reg_val = mii_read(phy_addr[index],10);
++ printk("reg_val0 = %x \n",reg_val);
++ if ((reg_val & 0x0800) == 0x0800)
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 2;
++ printk(" 1000M/Full \n");
++ }
++ else if ((reg_val & 0x0400) == 0x0400)
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 2;
++ printk(" 1000M/Half \n");
++ }
++ else
++ {
++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
++ printk("reg_val1 = %x \n",reg_val);
++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 1;
++ printk(" 100M/Full \n");
++ }
++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 1;
++ printk(" 100M/Half \n");
++ }
++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 0;
++ printk(" 10M/Full \n");
++ }
++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 0;
++ printk(" 100M/Half \n");
++ }
++ }
++
++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
++ if ((reg_val & 0x20)==0x20)
++ {
++ flow_control_enable[index] = 1;
++ printk("Flow Control Enable. \n");
++ }
++ else
++ {
++ flow_control_enable[index] = 0;
++ printk("Flow Control Disable. \n");
++ }
++ full_duplex = status.bits.duplex;
++ speed = status.bits.speed;
++}
++
++static void gmac_get_phy_status(struct net_device *dev)
++{
++ GMAC_CONFIG0_T config0,config0_mask;
++ GMAC_STATUS_T status;
++ unsigned int reg_val;
++ unsigned int index;
++
++ index = gmac_select_interface(dev);
++
++ status.bits32 = 0;
++ status.bits.phy_mode = 1;
++
++#ifdef CONFIG_SL3516_ASIC
++ status.bits.mii_rmii = 2; /* default value for ASIC version */
++// status.bits.speed = 1;
++#else
++ if (index==0)
++ status.bits.mii_rmii = 0;
++ else
++ status.bits.mii_rmii = 2;
++#endif
++
++ /* read PHY status register */
++ reg_val = mii_read(phy_addr[index],0x01);
++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
++ {
++ /* read PHY Auto-Negotiation Link Partner Ability Register */
++ reg_val = mii_read(phy_addr[index],10);
++ if ((reg_val & 0x0800) == 0x0800)
++ {
++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */
++ status.bits.duplex = 1;
++ status.bits.speed = 2;
++ }
++ else if ((reg_val & 0x0400) == 0x0400)
++ {
++ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */
++ status.bits.duplex = 0;
++ status.bits.speed = 2;
++ }
++ else
++ {
++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
++ if ((reg_val & 0x08)==0x08) /* 100M full duplex */
++ {
++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
++ status.bits.duplex = 1;
++ status.bits.speed = 1;
++ }
++ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
++ {
++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
++ status.bits.duplex = 0;
++ status.bits.speed = 1;
++ }
++ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
++ {
++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
++ status.bits.duplex = 1;
++ status.bits.speed = 0;
++ }
++ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
++ {
++ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
++ status.bits.duplex = 0;
++ status.bits.speed = 0;
++ }
++ }
++ status.bits.link = LINK_UP; /* link up */
++ netif_wake_queue(dev);
++
++ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
++ if ((reg_val & 0x20)==0x20)
++ {
++ if (flow_control_enable[index] == 0)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 1; /* enable tx flow control */
++ config0.bits.rx_fc_en = 1; /* enable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++// printk("eth%d Flow Control Enable. \n",index);
++ }
++ flow_control_enable[index] = 1;
++ }
++ else
++ {
++ if (flow_control_enable[index] == 1)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 0; /* disable tx flow control */
++ config0.bits.rx_fc_en = 0; /* disable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++// printk("eth%d Flow Control Disable. \n",index);
++ }
++ flow_control_enable[index] = 0;
++ }
++
++ if (pre_phy_status[index] == LINK_DOWN)
++ {
++ gmac_enable_tx_rx(dev);
++ pre_phy_status[index] = LINK_UP;
++ set_bit(__LINK_STATE_START, &dev->state);
++ storlink_ctl.link = 1;
++// printk("eth%d Link Up ...\n",index);
++ }
++ }
++ else
++ {
++ status.bits.link = LINK_DOWN; /* link down */
++ netif_stop_queue(dev);
++ flow_control_enable[index] = 0;
++ storlink_ctl.link = 0;
++ if (pre_phy_status[index] == LINK_UP)
++ {
++ gmac_disable_tx_rx(dev);
++ pre_phy_status[index] = LINK_DOWN;
++ clear_bit(__LINK_STATE_START, &dev->state);
++// printk("eth%d Link Down ...\n",index);
++ }
++
++ }
++
++ reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS);
++ if (reg_val != status.bits32)
++ {
++ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f);
++ }
++}
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
++
++/* define GPIO pin for MDC/MDIO */
++
++// for gemini ASIC
++#ifdef CONFIG_SL3516_ASIC
++#define H_MDC_PIN 22
++#define H_MDIO_PIN 21
++#define G_MDC_PIN 22
++#define G_MDIO_PIN 21
++#else
++#define H_MDC_PIN 3
++#define H_MDIO_PIN 2
++#define G_MDC_PIN 0
++#define G_MDIO_PIN 1
++#endif
++
++//#define GPIO_MDC 0x80000000
++//#define GPIO_MDIO 0x00400000
++
++static unsigned int GPIO_MDC = 0;
++static unsigned int GPIO_MDIO = 0;
++static unsigned int GPIO_MDC_PIN = 0;
++static unsigned int GPIO_MDIO_PIN = 0;
++
++// For PHY test definition!!
++#define LPC_EECK 0x02
++#define LPC_EDIO 0x04
++#define LPC_GPIO_SET 3
++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0c,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++};
++/***********************/
++/* MDC : GPIO[31] */
++/* MDIO: GPIO[22] */
++/***********************/
++
++/***************************************************
++* All the commands should have the frame structure:
++*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE>
++****************************************************/
++
++/*****************************************************************
++* Inject a bit to NWay register through CSR9_MDC,MDIO
++*******************************************************************/
++void mii_serial_write(char bit_MDO) // write data into mii PHY
++{
++#if 0 //def CONFIG_SL2312_LPC_IT8712
++ unsigned char iomode,status;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ if(bit_MDO)
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= LPC_EDIO ; //EDIO high
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++ else
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status &= ~(LPC_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++
++ status |= LPC_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(LPC_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++#else
++ unsigned int addr;
++ unsigned int value;
++
++ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
++ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
++ writel(value,addr);
++ if(bit_MDO)
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDIO,addr); /* set MDIO to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDIO,addr); /* set MDIO to 0 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++ }
++
++#endif
++}
++
++/**********************************************************************
++* read a bit from NWay register through CSR9_MDC,MDIO
++***********************************************************************/
++unsigned int mii_serial_read(void) // read data from mii PHY
++{
++#if 0 //def CONFIG_SL2312_LPC_IT8712
++ unsigned char iomode,status;
++ unsigned int value ;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode &= ~(LPC_EDIO) ; // Set EDIO input
++ iomode |= (LPC_EECK) ; // Set EECK,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= LPC_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(LPC_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++ value = inb_gpio( LPC_GPIO_SET);
++
++ value = value>>2 ;
++ value &= 0x01;
++
++ return value ;
++
++#else
++ unsigned int *addr;
++ unsigned int value;
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
++ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */
++ writel(value,addr);
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
++ value = readl(addr);
++ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN;
++ return(value);
++
++#endif
++}
++
++/***************************************
++* preamble + ST
++***************************************/
++void mii_pre_st(void)
++{
++ unsigned char i;
++
++ for(i=0;i<32;i++) // PREAMBLE
++ mii_serial_write(1);
++ mii_serial_write(0); // ST
++ mii_serial_write(1);
++}
++
++
++/******************************************
++* Read MII register
++* phyad -> physical address
++* regad -> register address
++***************************************** */
++unsigned int mii_read(unsigned char phyad,unsigned char regad)
++{
++ unsigned int i,value;
++ unsigned int bit;
++
++ if (phyad == GPHY_ADDR)
++ {
++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++ }
++ else
++ {
++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++ }
++ GPIO_MDC = (1<<GPIO_MDC_PIN);
++ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
++
++ mii_pre_st(); // PRE+ST
++ mii_serial_write(1); // OP
++ mii_serial_write(0);
++
++ for (i=0;i<5;i++) { // PHYAD
++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ for (i=0;i<5;i++) { // REGAD
++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ mii_serial_read(); // TA_Z
++// if((bit=mii_serial_read()) !=0 ) // TA_0
++// {
++// return(0);
++// }
++ value=0;
++ for (i=0;i<16;i++) { // READ DATA
++ bit=mii_serial_read();
++ value += (bit<<(15-i)) ;
++ }
++
++ mii_serial_write(0); // dumy clock
++ mii_serial_write(0); // dumy clock
++//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
++ return(value);
++}
++
++/******************************************
++* Write MII register
++* phyad -> physical address
++* regad -> register address
++* value -> value to be write
++***************************************** */
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
++{
++ unsigned int i;
++ char bit;
++
++printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
++ if (phyad == GPHY_ADDR)
++ {
++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++ }
++ else
++ {
++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++ }
++ GPIO_MDC = (1<<GPIO_MDC_PIN);
++ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
++
++ mii_pre_st(); // PRE+ST
++ mii_serial_write(0); // OP
++ mii_serial_write(1);
++ for (i=0;i<5;i++) { // PHYAD
++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ for (i=0;i<5;i++) { // REGAD
++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++ mii_serial_write(1); // TA_1
++ mii_serial_write(0); // TA_0
++
++ for (i=0;i<16;i++) { // OUT DATA
++ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
++ mii_serial_write(bit);
++ }
++ mii_serial_write(0); // dumy clock
++ mii_serial_write(0); // dumy clock
++}
++
++
++
++
++
++
++
++
++
++/* NOTES
++ * The instruction set of the 93C66/56/46/26/06 chips are as follows:
++ *
++ * Start OP *
++ * Function Bit Code Address** Data Description
++ * -------------------------------------------------------------------
++ * READ 1 10 A7 - A0 Reads data stored in memory,
++ * starting at specified address
++ * EWEN 1 00 11XXXXXX Write enable must precede
++ * all programming modes
++ * ERASE 1 11 A7 - A0 Erase register A7A6A5A4A3A2A1A0
++ * WRITE 1 01 A7 - A0 D15 - D0 Writes register
++ * ERAL 1 00 10XXXXXX Erase all registers
++ * WRAL 1 00 01XXXXXX D15 - D0 Writes to all registers
++ * EWDS 1 00 00XXXXXX Disables all programming
++ * instructions
++ * *Note: A value of X for address is a don't care condition.
++ * **Note: There are 8 address bits for the 93C56/66 chips unlike
++ * the 93C46/26/06 chips which have 6 address bits.
++ *
++ * The 93Cx6 has a four wire interface: clock, chip select, data in, and
++ * data out.While the ADM6996 uning three interface: clock, chip select,and data line.
++ * The input and output are the same pin. ADM6996 can only recognize the write cmd.
++ * In order to perform above functions, you need
++ * 1. to enable the chip select .
++ * 2. send one clock of dummy clock
++ * 3. send start bit and opcode
++ * 4. send 8 bits address and 16 bits data
++ * 5. to disable the chip select.
++ * Jason Lee 2003/07/30
++ */
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define GPIO_EECS 0x00400000 /* EECS: GPIO[22] */
++//#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/
++#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/
++#define GPIO_EECK 0x80000000 /* EECK: GPIO[31] */
++
++#define ADM_EECS 0x01
++#define ADM_EECK 0x02
++#define ADM_EDIO 0x04
++/*************************************************************
++* SPI protocol for ADM6996 control
++**************************************************************/
++#define SPI_OP_LEN 0x03 // the length of start bit and opcode
++#define SPI_OPWRITE 0X05 // write
++#define SPI_OPREAD 0X06 // read
++#define SPI_OPERASE 0X07 // erase
++#define SPI_OPWTEN 0X04 // write enable
++#define SPI_OPWTDIS 0X04 // write disable
++#define SPI_OPERSALL 0X04 // erase all
++#define SPI_OPWTALL 0X04 // write all
++
++#define SPI_ADD_LEN 8 // bits of Address
++#define SPI_DAT_LEN 16 // bits of Data
++#define ADM6996_PORT_NO 6 // the port number of ADM6996
++#define ADM6999_PORT_NO 9 // the port number of ADM6999
++#ifdef CONFIG_ADM_6996
++ #define ADM699X_PORT_NO ADM6996_PORT_NO
++#endif
++#ifdef CONFIG_ADM_6999
++ #define ADM699X_PORT_NO ADM6999_PORT_NO
++#endif
++#define LPC_GPIO_SET 3
++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
++
++extern int it8712_exist;
++
++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++
++/****************************************/
++/* Function Declare */
++/****************************************/
++/*
++void SPI_write(unsigned char addr,unsigned int value);
++unsigned int SPI_read(unsigned char table,unsigned char addr);
++void SPI_write_bit(char bit_EEDO);
++unsigned int SPI_read_bit(void);
++void SPI_default(void);
++void SPI_reset(unsigned char rstype,unsigned char port_cnt);
++void SPI_pre_st(void);
++void SPI_CS_enable(unsigned char enable);
++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
++void SPI_Set_tag(unsigned int port,unsigned tag);
++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
++void SPI_mac_lock(unsigned int port, unsigned char lock);
++void SPI_get_port_state(unsigned int port);
++void SPI_port_enable(unsigned int port,unsigned char enable);
++
++void SPI_get_status(unsigned int port);
++*/
++
++struct PORT_CONFIG
++{
++ unsigned char auto_negotiation; // 0:Disable 1:Enable
++ unsigned char speed; // 0:10M 1:100M
++ unsigned char duplex; // 0:Half 1:Full duplex
++ unsigned char Tag; // 0:Untag 1:Tag
++ unsigned char port_disable; // 0:port enable 1:disable
++ unsigned char pvid; // port VLAN ID 0001
++ unsigned char mdix; // Crossover judgement. 0:Disable 1:Enable
++ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable
++};
++
++struct PORT_STATUS
++{
++ unsigned char link; // 0:not link 1:link established
++ unsigned char speed; // 0:10M 1:100M
++ unsigned char duplex; // 0:Half 1:Full duplex
++ unsigned char flow_ctl; // 0:flow control disable 1:enable
++ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable
++ unsigned char port_disable; // 0:port enable 1:disable
++
++ // Serial Management
++ unsigned long rx_pac_count; //receive packet count
++ unsigned long rx_pac_byte; //receive packet byte count
++ unsigned long tx_pac_count; //transmit packet count
++ unsigned long tx_pac_byte; //transmit packet byte count
++ unsigned long collision_count; //error count
++ unsigned long error_count ;
++
++ unsigned long rx_pac_count_overflow; //overflow flag
++ unsigned long rx_pac_byte_overflow;
++ unsigned long tx_pac_count_overflow;
++ unsigned long tx_pac_byte_overflow;
++ unsigned long collision_count_overflow;
++ unsigned long error_count_overflow;
++};
++
++struct PORT_CONFIG port_config[ADM699X_PORT_NO]; // 0~3:LAN , 4:WAN , 5:MII
++static struct PORT_STATUS port_state[ADM699X_PORT_NO];
++
++/******************************************
++* SPI_write
++* addr -> Write Address
++* value -> value to be write
++***************************************** */
++void SPI_write(unsigned char addr,unsigned int value)
++{
++ int i;
++ char bit;
++#ifdef CONFIG_IT8712_GPIO
++ char status;
++#else
++ int ad1;
++#endif
++
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++ SPI_CS_enable(1);
++
++ SPI_write_bit(0); //dummy clock
++
++ //send write command (0x05)
++ for(i=SPI_OP_LEN-1;i>=0;i--)
++ {
++ bit = (SPI_OPWRITE>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++ // send 8 bits address (MSB first, LSB last)
++ for(i=SPI_ADD_LEN-1;i>=0;i--)
++ {
++ bit = (addr>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++ // send 16 bits data (MSB first, LSB last)
++ for(i=SPI_DAT_LEN-1;i>=0;i--)
++ {
++ bit = (value>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++
++ SPI_CS_enable(0); // CS low
++
++ for(i=0;i<0xFFF;i++) ;
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++}
++
++
++/************************************
++* SPI_write_bit
++* bit_EEDO -> 1 or 0 to be written
++************************************/
++void SPI_write_bit(char bit_EEDO)
++{
++#ifdef CONFIG_IT8712_GPIO
++ unsigned char iomode,status;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ if(bit_EEDO)
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= ADM_EDIO ; //EDIO high
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++ else
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++
++ status |= ADM_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(ADM_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++#else
++ unsigned int addr;
++ unsigned int value;
++
++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++ value = readl(addr) |GPIO_EECK |GPIO_MISO ; /* set EECK/MISO Pin to output */
++ writel(value,addr);
++ if(bit_EEDO)
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MISO,addr); /* set MISO to 1 */
++ writel(GPIO_EECK,addr); /* set EECK to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); /* set EECK to 0 */
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,addr); /* set MISO to 0 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); /* set EECK to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); /* set EECK to 0 */
++ }
++
++ return ;
++#endif
++}
++
++/**********************************************************************
++* read a bit from ADM6996 register
++***********************************************************************/
++unsigned int SPI_read_bit(void) // read data from
++{
++#ifdef CONFIG_IT8712_GPIO
++ unsigned char iomode,status;
++ unsigned int value ;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode &= ~(ADM_EDIO) ; // Set EDIO input
++ iomode |= (ADM_EECS|ADM_EECK) ; // Set EECK,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= ADM_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(ADM_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++ value = inb_gpio( LPC_GPIO_SET);
++
++ value = value>>2 ;
++ value &= 0x01;
++
++ return value ;
++#else
++ unsigned int addr;
++ unsigned int value;
++
++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input
++ writel(value,addr);
++
++ addr =(GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); // set EECK to 1
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); // set EECK to 0
++
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_IN);
++ value = readl(addr) ;
++ value = value >> 30;
++ return value ;
++#endif
++}
++
++/******************************************
++* SPI_default
++* EEPROM content default value
++*******************************************/
++void SPI_default(void)
++{
++ int i;
++#ifdef CONFIG_ADM_6999
++ SPI_write(0x11,0xFF30);
++ for(i=1;i<8;i++)
++ SPI_write(i,0x840F);
++
++ SPI_write(0x08,0x880F); //port 8 Untag, PVID=2
++ SPI_write(0x09,0x881D); //port 9 Tag, PVID=2 ,10M
++ SPI_write(0x14,0x017F); //Group 0~6,8 as VLAN 1
++ SPI_write(0x15,0x0180); //Group 7,8 as VLAN 2
++#endif
++
++#ifdef CONFIG_ADM_6996
++ SPI_write(0x11,0xFF30);
++ SPI_write(0x01,0x840F); //port 0~3 Untag ,PVID=1 ,100M ,duplex
++ SPI_write(0x03,0x840F);
++ SPI_write(0x05,0x840F);
++ SPI_write(0x07,0x840F);
++ SPI_write(0x08,0x880F); //port 4 Untag, PVID=2
++ SPI_write(0x09,0x881D); //port 5 Tag, PVID=2 ,10M
++ SPI_write(0x14,0x0155); //Group 0~3,5 as VLAN 1
++ SPI_write(0x15,0x0180); //Group 4,5 as VLAN 2
++
++#endif
++
++ for(i=0x16;i<=0x22;i++)
++ SPI_write((unsigned char)i,0x0000); // clean VLAN¡@map 3~15
++
++ for (i=0;i<NUM_VLAN_IF;i++) // Set VLAN ID map 1,2
++ SPI_Set_PVID( VLAN_conf[i].vid, VLAN_conf[i].portmap);
++
++ for(i=0;i<ADM699X_PORT_NO;i++) // reset count
++ SPI_reset(0,i);
++}
++
++/*************************************************
++* SPI_reset
++* rstype -> reset type
++* 0:reset all count for 'port_cnt' port
++* 1:reset specified count 'port_cnt'
++* port_cnt -> port number or counter index
++***************************************************/
++void SPI_reset(unsigned char rstype,unsigned char port_cnt)
++{
++
++ int i;
++#ifdef CONFIG_IT8712_GPIO
++ char status;
++#else
++ int ad1;
++#endif
++ char bit;
++
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++ SPI_CS_enable(0); // CS low
++
++ SPI_pre_st(); // PRE+ST
++ SPI_write_bit(0); // OP
++ SPI_write_bit(1);
++
++ SPI_write_bit(1); // Table select, must be 1 -> reset Counter
++
++ SPI_write_bit(0); // Device Address
++ SPI_write_bit(0);
++
++ rstype &= 0x01;
++ SPI_write_bit(rstype); // Reset type 0:clear dedicate port's all counters 1:clear dedicate counter
++
++ for (i=5;i>=0;i--) // port or cnt index
++ {
++ bit = port_cnt >> i ;
++ bit &= 0x01 ;
++ SPI_write_bit(bit);
++ }
++
++ SPI_write_bit(0); // dumy clock
++ SPI_write_bit(0); // dumy clock
++
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++}
++
++/*****************************************************
++* SPI_pre_st
++* preambler: 32 bits '1' start bit: '01'
++*****************************************************/
++void SPI_pre_st(void)
++{
++ int i;
++
++ for(i=0;i<32;i++) // PREAMBLE
++ SPI_write_bit(1);
++ SPI_write_bit(0); // ST
++ SPI_write_bit(1);
++}
++
++
++/***********************************************************
++* SPI_CS_enable
++* before access ,you have to enable Chip Select. (pull high)
++* When fisish, you should pull low !!
++*************************************************************/
++void SPI_CS_enable(unsigned char enable)
++{
++#ifdef CONFIG_IT8712_GPIO
++
++ unsigned char iomode,status;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++
++ status = inb_gpio( LPC_GPIO_SET);
++ if(enable)
++ status |= ADM_EECS ; //EECS high
++ else
++ status &= ~(ADM_EECS) ; //EECS low
++
++ outb_gpio(LPC_GPIO_SET, status);
++
++
++ status |= ADM_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(ADM_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++#else
++ unsigned int addr,value;
++
++ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
++ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */
++ writel(value,addr);
++
++ if(enable)
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_EECS,addr); /* set EECS to 1 */
++
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_EECS,addr); /* set EECS to 0 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); /* set EECK to 1 */ // at least one clock after CS low
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); /* set EECK to 0 */
++ }
++#endif
++}
++
++/*********************************************************
++* SPI_Set_VLAN: group ports as VLAN
++* LAN -> VLAN number : 0~16
++* port_mask -> ports which would group as LAN
++* ex. 0x03 = 0000 0011
++* port 0 and port 1
++*********************************************************/
++void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask)
++{
++ unsigned int i,value=0;
++ unsigned reg_add = 0x13 + LAN ;
++
++ for(i=0;i<ADM6996_PORT_NO;i++)
++ { if(port_mask&0x01)
++ {
++ switch(i)
++ {
++ case 0: value|=0x0001; break; //port0:bit[0]
++ case 1: value|=0x0004; break; //port1:bit[2]
++ case 2: value|=0x0010; break; //port2:bit[4]
++ case 3: value|=0x0040; break; //port3:bit[6]
++ case 4: value|=0x0080; break; //port4:bit[7]
++ case 5: value|=0x0100; break; //port5:bit[8]
++ }
++ }
++ port_mask >>= 1;
++ }
++
++ SPI_write(reg_add,value);
++}
++
++
++/*******************************************
++* SPI_Set_tag
++* port -> port number to set tag or untag
++* tag -> 0/set untag, 1/set tag
++* In general, tag is for MII port. LAN and
++* WAN port is configed as untag!!
++********************************************/
++void SPI_Set_tag(unsigned int port,unsigned tag)
++{
++ unsigned int regadd,value;
++
++ // mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9)
++ if(port<=3)
++ regadd=2*port+1;
++ else if(port==4) regadd = 8 ;
++ else regadd = 9 ;
++
++
++ value = SPI_read(0,regadd); //read original setting
++
++ if(tag)
++ value |= 0x0010 ; // set tag
++ else
++ value &= 0xFFEF ; // set untag
++
++ SPI_write(regadd,value); // write back!!
++}
++
++/************************************************
++* SPI_Set_PVID
++* PVID -> PVID number :
++* port_mask -> ports which would group as LAN
++* ex. 0x0F = 0000 1111 ==> port 0~3
++************************************************/
++void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask)
++{
++ unsigned int i,value=0;
++
++ PVID &= 0x000F ;
++
++ for(i=0;i<ADM699X_PORT_NO;i++)
++ { if(port_mask&0x01)
++ {
++#ifdef CONFIG_ADM_6996
++ switch(i)
++ {
++ case 0:
++ value = SPI_read(0,0x01); // read original value
++ value &= 0xC3FF ; //set PVIC column as 0 first
++ value |= PVID << 10 ; //Set PVID column as PVID
++ SPI_write(0x01,value); //write back
++ break;
++ case 1:
++ value = SPI_read(0,0x03);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write(0x03,value);
++ break;
++ case 2:
++ value = SPI_read(0,0x05);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write(0x05,value);
++ break;
++ case 3:
++ value = SPI_read(0,0x07);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write(0x07,value);
++ break;
++ case 4:
++ value = SPI_read(0,0x08);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write(0x08,value);
++ break;
++ case 5:
++ value = SPI_read(0,0x09);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write(0x09,value);
++ break;
++ }
++#endif
++#ifdef CONFIG_ADM_6999
++ value = SPI_read(0,(unsigned char)i+1);
++ value &= 0xC3FF ;
++ value |= PVID << 10 ;
++ SPI_write((unsigned char)i+1,value);
++#endif
++ }
++ port_mask >>= 1;
++ }
++}
++
++
++/************************************************
++* SPI_get_PVID
++* port -> which ports to VID
++************************************************/
++unsigned int SPI_Get_PVID(unsigned int port)
++{
++ unsigned int value=0;
++
++ if (port>=ADM6996_PORT_NO)
++ return 0;
++
++ switch(port)
++ {
++ case 0:
++ value = SPI_read(0,0x01); // read original value
++ value &= 0x3C00 ; // get VID
++ value = value >> 10 ; // Shift
++ break;
++ case 1:
++ value = SPI_read(0,0x03);
++ value &= 0x3C00 ;
++ value = value >> 10 ;
++ break;
++ case 2:
++ value = SPI_read(0,0x05);
++ value &= 0x3C00 ;
++ value = value >> 10 ;
++ break;
++ case 3:
++ value = SPI_read(0,0x07);
++ value &= 0x3C00 ;
++ value = value >> 10 ;
++ break;
++ case 4:
++ value = SPI_read(0,0x08);
++ value &= 0x3C00 ;
++ value = value >> 10 ;
++ break;
++ case 5:
++ value = SPI_read(0,0x09);
++ value &= 0x3C00 ;
++ value = value >> 10 ;
++ break;
++ }
++ return value ;
++}
++
++
++/**********************************************
++* SPI_mac_clone
++* port -> the port which will lock or unlock
++* lock -> 0/the port will be unlock
++* 1/the port will be locked
++**********************************************/
++void SPI_mac_lock(unsigned int port, unsigned char lock)
++{
++ unsigned int i,value=0;
++
++ value = SPI_read(0,0x12); // read original
++
++ for(i=0;i<ADM6996_PORT_NO;i++)
++ { if(lock) // lock port
++ {
++ switch(port)
++ {
++ case 0: value|=0x0001; break; //port0:bit[0]
++ case 1: value|=0x0004; break; //port1:bit[2]
++ case 2: value|=0x0010; break; //port2:bit[4]
++ case 3: value|=0x0040; break; //port3:bit[6]
++ case 4: value|=0x0080; break; //port4:bit[7]
++ case 5: value|=0x0100; break; //port5:bit[8]
++ }
++ }
++ else
++ {
++ switch(i) // unlock port
++ {
++ case 0: value&=0xFFFE; break;
++ case 1: value&=0xFFFB; break;
++ case 2: value&=0xFFEF; break;
++ case 3: value&=0xFFBF; break;
++ case 4: value&=0xFF7F; break;
++ case 5: value&=0xFEFF; break;
++ }
++ }
++ }
++
++ SPI_write(0x12,value);
++}
++
++
++/***************************************************
++* SPI_learn_pause
++* pause = 01-80-c2-00-00-01
++* DA=distination address
++* forward -> 0: if DA == pause then drop and stop mac learning
++* 1: if DA == pause ,then forward it
++***************************************************/
++void SPI_pause_cmd_forward(unsigned char forward)
++{
++ unsigned int value=0;
++
++ value = SPI_read(0,0x2C); // read original setting
++ if(forward)
++ value |= 0x2000; // set bit[13] '1'
++ else
++ value &= 0xDFFF; // set bit[13] '0'
++
++ SPI_write(0x2C,value);
++
++}
++
++
++/************************************************
++* SPI_read
++* table -> which table to be read: 1/count 0/EEPROM
++* addr -> Address to be read
++* return : Value of the register
++*************************************************/
++unsigned int SPI_read(unsigned char table,unsigned char addr)
++{
++ int i ;
++ unsigned int value=0;
++ unsigned int bit;
++#ifdef CONFIG_IT8712_GPIO
++ unsigned char status;
++#else
++ unsigned int ad1;
++#endif
++
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++ SPI_CS_enable(0);
++
++ SPI_pre_st(); // PRE+ST
++ SPI_write_bit(1); // OPCODE '10' for read
++ SPI_write_bit(0);
++
++ (table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ; // table select
++
++ SPI_write_bit(0); // Device Address
++ SPI_write_bit(0);
++
++
++ // send 7 bits address to be read
++ for (i=6;i>=0;i--) {
++ bit= ((addr>>i) & 0x01) ? 1 :0 ;
++ SPI_write_bit(bit);
++ }
++
++
++ // turn around
++ SPI_read_bit(); // TA_Z
++
++ value=0;
++ for (i=31;i>=0;i--) { // READ DATA
++ bit=SPI_read_bit();
++ value |= bit << i ;
++ }
++
++ SPI_read_bit(); // dumy clock
++ SPI_read_bit(); // dumy clock
++
++ if(!table) // EEPROM, only fetch 16 bits data
++ {
++ if(addr&0x01) // odd number content (register,register-1)
++ value >>= 16 ; // so we remove the rear 16bits
++ else // even number content (register+1,register),
++ value &= 0x0000FFFF ; // so we keep the rear 16 bits
++ }
++
++
++ SPI_CS_enable(0);
++
++#ifdef CONFIG_IT8712_GPIO
++ status = inb_gpio(LPC_GPIO_SET);
++ status &= ~(ADM_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++#else
++ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MISO,ad1); /* set MISO to 0 */
++#endif
++
++ return(value);
++
++}
++
++
++
++/**************************************************
++* SPI_port_en
++* port -> Number of port to config
++* enable -> 1/ enable this port
++* 0/ disable this port
++**************************************************/
++void SPI_port_enable(unsigned int port,unsigned char enable)
++{
++ unsigned int reg_val ;
++ unsigned char reg_add ;
++
++ if(port<=3)
++ reg_add=2*port+1;
++ else if(port==4) reg_add = 8 ;
++ else reg_add = 9 ;
++
++ reg_val = SPI_read(0,reg_add);
++ if(enable)
++ {
++ reg_val &= 0xFFDF ;
++ SPI_write(reg_add,reg_val);
++ }
++ else
++ {
++ reg_val |= 0x0020 ;
++ SPI_write(reg_add,reg_val);
++ }
++}
++
++/********************************************************
++* get port status
++* port -> specify the port number to get configuration
++*********************************************************/
++void SPI_get_status(unsigned int port)
++{
++/* unsigned int reg_val,add_offset[6];
++ struct PORT_STATUS *status;
++ status = &port_state[port];
++
++ if(port>(ADM6996_PORT_NO-1))
++ return ;
++
++ // Link estabilish , speed, deplex, flow control ?
++ if(port < 5 )
++ {
++ reg_val = SPI_read(1, 1) ;
++ if(port < 4)
++ reg_val >>= port*8 ;
++ else
++ reg_val >>=28 ;
++ status->link = reg_val & 0x00000001 ;
++ status->speed = reg_val & 0x00000002 ;
++ status->duplex = reg_val & 0x00000004 ;
++ status->flow_ctl = reg_val & 0x00000008 ;
++ }
++ else if(port ==5 )
++ {
++ reg_val = SPI_read(1, 2) ;
++ status->link = reg_val & 0x00000001 ;
++ status->speed = reg_val & 0x00000002 ;
++ status->duplex = reg_val & 0x00000008 ;
++ status->flow_ctl = reg_val & 0x00000010 ;
++ }
++
++ // Mac Lock ?
++ reg_val = SPI_read(0,0x12);
++ switch(port)
++ {
++ case 0: status->mac_lock = reg_val & 0x00000001;
++ case 1: status->mac_lock = reg_val & 0x00000004;
++ case 2: status->mac_lock = reg_val & 0x00000010;
++ case 3: status->mac_lock = reg_val & 0x00000040;
++ case 4: status->mac_lock = reg_val & 0x00000080;
++ case 5: status->mac_lock = reg_val & 0x00000100;
++ }
++
++ // port enable ?
++ add_offset[0] = 0x01 ; add_offset[1] = 0x03 ;
++ add_offset[2] = 0x05 ; add_offset[3] = 0x07 ;
++ add_offset[4] = 0x08 ; add_offset[5] = 0x09 ;
++ reg_val = SPI_read(0,add_offset[port]);
++ status->port_disable = reg_val & 0x0020;
++
++
++ // Packet Count ...
++ add_offset[0] = 0x04 ; add_offset[1] = 0x06 ;
++ add_offset[2] = 0x08 ; add_offset[3] = 0x0a ;
++ add_offset[4] = 0x0b ; add_offset[5] = 0x0c ;
++
++ reg_val = SPI_read(1,add_offset[port]);
++ status->rx_pac_count = reg_val ;
++ reg_val = SPI_read(1,add_offset[port]+9);
++ status->rx_pac_byte = reg_val ;
++ reg_val = SPI_read(1,add_offset[port]+18);
++ status->tx_pac_count = reg_val ;
++ reg_val = SPI_read(1,add_offset[port]+27);
++ status->tx_pac_byte = reg_val ;
++ reg_val = SPI_read(1,add_offset[port]+36);
++ status->collision_count = reg_val ;
++ reg_val = SPI_read(1,add_offset[port]+45);
++ status->error_count = reg_val ;
++ reg_val = SPI_read(1, 0x3A);
++ switch(port)
++ {
++ case 0: status->rx_pac_count_overflow = reg_val & 0x00000001;
++ status->rx_pac_byte_overflow = reg_val & 0x00000200 ;
++ case 1: status->rx_pac_count_overflow = reg_val & 0x00000004;
++ status->rx_pac_byte_overflow = reg_val & 0x00000800 ;
++ case 2: status->rx_pac_count_overflow = reg_val & 0x00000010;
++ status->rx_pac_byte_overflow = reg_val & 0x00002000 ;
++ case 3: status->rx_pac_count_overflow = reg_val & 0x00000040;;
++ status->rx_pac_byte_overflow = reg_val & 0x00008000 ;
++ case 4: status->rx_pac_count_overflow = reg_val & 0x00000080;
++ status->rx_pac_byte_overflow = reg_val & 0x00010000 ;
++ case 5: status->rx_pac_count_overflow = reg_val & 0x00000100;
++ status->rx_pac_byte_overflow = reg_val & 0x00020000 ;
++ }
++
++ reg_val = SPI_read(1, 0x3B);
++ switch(port)
++ {
++ case 0: status->tx_pac_count_overflow = reg_val & 0x00000001;
++ status->tx_pac_byte_overflow = reg_val & 0x00000200 ;
++ case 1: status->tx_pac_count_overflow = reg_val & 0x00000004;
++ status->tx_pac_byte_overflow = reg_val & 0x00000800 ;
++ case 2: status->tx_pac_count_overflow = reg_val & 0x00000010;
++ status->tx_pac_byte_overflow = reg_val & 0x00002000 ;
++ case 3: status->tx_pac_count_overflow = reg_val & 0x00000040;;
++ status->tx_pac_byte_overflow = reg_val & 0x00008000 ;
++ case 4: status->tx_pac_count_overflow = reg_val & 0x00000080;
++ status->tx_pac_byte_overflow = reg_val & 0x00010000 ;
++ case 5: status->tx_pac_count_overflow = reg_val & 0x00000100;
++ status->tx_pac_byte_overflow = reg_val & 0x00020000 ;
++ }
++*/
++
++ unsigned int reg_val;
++ struct PORT_STATUS *status;
++ status = &port_state[port];
++
++ if(port>=ADM6999_PORT_NO)
++ return ;
++
++ // Link estabilish , speed, deplex, flow control ?
++ if(port < ADM6999_PORT_NO-1 )
++ {
++ reg_val = SPI_read(1, 0x01) ;
++ reg_val = reg_val >> port*4 ;
++ status->link = reg_val & 0x00000001 ;
++ status->speed = reg_val & 0x00000002 ;
++ status->duplex = reg_val & 0x00000004 ;
++ status->flow_ctl = reg_val & 0x00000008 ;
++ }
++ else if(port == (ADM6999_PORT_NO-1) )
++ {
++ reg_val = SPI_read(1, 0x02) ;
++ status->link = reg_val & 0x00000001 ;
++ status->speed = reg_val & 0x00000002 ;
++ status->duplex = reg_val & 0x00000008 ;
++ status->flow_ctl = reg_val & 0x00000010 ;
++ }
++
++ // Mac Lock ?
++ reg_val = SPI_read(0,0x12);
++ reg_val = reg_val >> port ;
++ reg_val = reg_val & 0x01 ;
++ status->mac_lock = reg_val ? 0x01:0x00 ;
++
++ // port enable ?
++ reg_val = SPI_read(0,(unsigned char)port+1);
++ status->port_disable = reg_val & 0x0020;
++
++ // Packet Count ...
++ reg_val = SPI_read(1,(unsigned char)port+0x04);
++ status->rx_pac_count = reg_val ;
++ reg_val = SPI_read(1,(unsigned char)port+0x0D);
++ status->rx_pac_byte = reg_val ;
++ reg_val = SPI_read(1,(unsigned char)port+0x16);
++ status->tx_pac_count = reg_val ;
++ reg_val = SPI_read(1,(unsigned char)port+0x1F);
++ status->tx_pac_byte = reg_val ;
++ reg_val = SPI_read(1,(unsigned char)port+0x28);
++ status->collision_count = reg_val ;
++ reg_val = SPI_read(1,(unsigned char)port+0x31);
++ status->error_count = reg_val ;
++ reg_val = SPI_read(1, 0x3A);
++ reg_val = reg_val >> port ;
++ status->rx_pac_count_overflow = reg_val & 0x00000001;
++ reg_val = reg_val >> 0x09 ;
++ status->rx_pac_byte_overflow = reg_val & 0x00000001 ;
++
++ reg_val = SPI_read(1, 0x3B);
++ reg_val = reg_val >> port ;
++ status->tx_pac_count_overflow = reg_val & 0x00000001;
++ reg_val = reg_val >> 0x09 ;
++ status->tx_pac_byte_overflow = reg_val & 0x00000001 ;
++
++ reg_val = SPI_read(1, 0x3C);
++ reg_val = reg_val >> port ;
++ status->collision_count_overflow = reg_val & 0x00000001;
++ reg_val = reg_val >> 0x09 ;
++ status->error_count_overflow = reg_val & 0x00000001 ;
++
++}
++
++unsigned int SPI_get_identifier(void)
++{
++ unsigned int flag=0;
++
++#ifdef CONFIG_IT8712_GPIO
++
++ if (!it8712_exist) {
++ return -ENODEV;
++ }
++ printk("it8712_gpio init\n");
++
++ /* initialize registers */
++ // switch all multi-function pins to GPIO
++ LPCSetConfig(LDN_GPIO, 0x28, 0xff);
++
++ // set simple I/O base address
++ LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8);
++ LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8);
++
++ // select GPIO to simple I/O
++ LPCSetConfig(LDN_GPIO, 0xc3, 0xff);
++
++ // enable internal pull-up
++ LPCSetConfig(LDN_GPIO, 0xbb, 0xff);
++
++#endif
++
++ flag = SPI_read(1,0x00);
++ printk("Get ADM identifier %6x\n",flag);
++ if ((flag & 0xFFFF0) == 0x21120) {
++ printk("ADM699X Found\n");
++ return 1;
++ }
++ else {
++ printk("ADM699X not Found\n");
++ return 0;
++ }
++}
++
+Index: linux-2.6.23.16/drivers/net/sl351x_crc16.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_crc16.c 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,93 @@
++/****************************************************************************
++* Name : sl351x_crc16.c
++* Description :
++* Implement CRC16
++* refer to RFC1662
++* History
++*
++* Date Writer Description
++* ----------- ----------- -------------------------------------------------
++* 09/14/2005 Gary Chen Create
++*
++****************************************************************************/
++
++#define INITFCS16 0xffff /* Initial FCS value */
++#define GOODFCS16 0xf0b8 /* Good final FCS value */
++#define SWAP_WORD(x) (unsigned short)((((unsigned short)x & 0x00FF) << 8) | \
++ (((unsigned short)x & 0xFF00) >> 8))
++
++/*----------------------------------------------------------------------
++* x**0 + x**5 + x**12 + x**16
++*----------------------------------------------------------------------*/
++static const unsigned short crc16_tbl[256] = {
++ 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
++ 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
++ 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
++ 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
++ 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
++ 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
++ 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
++ 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
++ 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
++ 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
++ 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
++ 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
++ 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
++ 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
++ 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
++ 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
++ 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
++ 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
++ 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
++ 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
++ 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
++ 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
++ 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
++ 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
++ 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
++ 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
++ 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
++ 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
++ 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
++ 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
++ 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
++ 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
++};
++
++/*----------------------------------------------------------------------
++* hash_crc16
++*----------------------------------------------------------------------*/
++unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len)
++{
++ while (len--)
++ {
++ crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff];
++ }
++
++ return (crc);
++
++}
++
++/*----------------------------------------------------------------------
++* hash_check_crc16
++*----------------------------------------------------------------------*/
++unsigned long hash_check_crc16(unsigned char *datap, unsigned long len)
++{
++ unsigned short crc;
++
++ crc = hash_crc16(INITFCS16, datap, len );
++ return (crc == GOODFCS16) ? 0 : 1;
++}
++
++/*----------------------------------------------------------------------
++* hash_gen_crc16
++*----------------------------------------------------------------------*/
++unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len)
++{
++ unsigned short crc;
++
++ crc = hash_crc16(INITFCS16, datap, len);
++ crc ^= 0xffff;
++
++ return(SWAP_WORD(crc));
++}
+Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 16:59:23.361457295 +0200
+@@ -0,0 +1,5622 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl351x_gmac.c
++* Description :
++* Ethernet device driver for Storlink SL351x FPGA
++*
++* History
++*
++* Date Writer Description
++* ----------- ----------- -------------------------------------------------
++* 08/22/2005 Gary Chen Create and implement
++* 27/10/2005 CH Hsu Porting to Linux
++*
++****************************************************************************/
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/mm.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/it8712.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/skbuff.h>
++#include <linux/in.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/udp.h>
++
++#include <linux/mtd/kvctl.h>
++
++#define MIDWAY
++#define SL_LEPUS
++#define VITESSE_G5SWITCH 1
++
++#ifndef CONFIG_SL351x_RXTOE
++//#define CONFIG_SL351x_RXTOE 1
++#endif
++#undef CONFIG_SL351x_RXTOE
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <asm/arch/sl351x_hash_cfg.h>
++#include <asm/arch/sl351x_nat_cfg.h>
++
++#ifdef CONFIG_SL351x_SYSCTL
++#include <linux/sysctl_storlink.h>
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++#include <asm/arch/sl351x_toe.h>
++#include <net/tcp.h>
++#include <linux/tcp.h>
++#include <linux/ip.h>
++#endif
++
++// #define SL351x_TEST_WORKAROUND
++#ifdef CONFIG_SL351x_NAT
++#define CONFIG_SL_NAPI 1
++#endif
++#define GMAX_TX_INTR_DISABLED 1
++#define DO_HW_CHKSUM 1
++#define ENABLE_TSO 1
++#define GMAC_USE_TXQ0 1
++// #define NAT_WORKAROUND_BY_RESET_GMAC 1
++// #define HW_RXBUF_BY_KMALLOC 1
++//#define _DUMP_TX_TCP_CONTENT 1
++#define br_if_ioctl 1
++#define GMAC_LEN_1_2_ISSUE 1
++
++#define GMAC_EXISTED_FLAG 0x5566abcd
++#define CONFIG_MAC_NUM GMAC_NUM
++#define GMAC0_BASE TOE_GMAC0_BASE
++#define GMAC1_BASE TOE_GMAC1_BASE
++#define PAUSE_SET_HW_FREEQ (TOE_HW_FREEQ_DESC_NUM / 2)
++#define PAUSE_REL_HW_FREEQ ((TOE_HW_FREEQ_DESC_NUM / 2) + 10)
++#define DEFAULT_RXQ_MAX_CNT 256
++#ifdef L2_jumbo_frame
++#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
++#endif
++
++/* define chip information */
++#define DRV_NAME "SL351x"
++#define DRV_VERSION "0.1.4"
++#define SL351x_DRIVER_NAME DRV_NAME " Giga Ethernet driver " DRV_VERSION
++
++#define toe_gmac_enable_interrupt(irq) enable_irq(irq)
++#define toe_gmac_disable_interrupt(irq) disable_irq(irq)
++
++#ifdef SL351x_GMAC_WORKAROUND
++#define GMAC_SHORT_FRAME_THRESHOLD 10
++static struct timer_list gmac_workround_timer_obj;
++void sl351x_poll_gmac_hanged_status(u32 data);
++#ifdef CONFIG_SL351x_NAT
++//#define IxscriptMate_1518 1
++ void sl351x_nat_workaround_init(void);
++ #ifndef NAT_WORKAROUND_BY_RESET_GMAC
++ static void sl351x_nat_workaround_handler(void);
++ #endif
++#endif
++#endif
++
++#ifdef GMAC_LEN_1_2_ISSUE
++ #define _DEBUG_PREFETCH_NUM 256
++static int _debug_prefetch_cnt;
++static char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4)));
++#endif
++/*************************************************************
++ * Global Variable
++ *************************************************************/
++static int gmac_initialized = 0;
++TOE_INFO_T toe_private_data;
++//static int do_again = 0;
++spinlock_t gmac_fq_lock;
++unsigned int FLAG_SWITCH;
++
++static unsigned int next_tick = 3 * HZ;
++static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
++
++#undef CONFIG_SL351x_RXTOE
++extern NAT_CFG_T nat_cfg;
++
++/************************************************/
++/* function declare */
++/************************************************/
++static int gmac_set_mac_address(struct net_device *dev, void *addr);
++static unsigned int gmac_get_phy_vendor(int phy_addr);
++static void gmac_set_phy_status(struct net_device *dev);
++void gmac_get_phy_status(struct net_device *dev);
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++static void gmac_tx_timeout(struct net_device *dev);
++static int gmac_phy_thread (void *data);
++struct net_device_stats * gmac_get_stats(struct net_device *dev);
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
++static void gmac_set_rx_mode(struct net_device *dev);
++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp);
++unsigned int mii_read(unsigned char phyad,unsigned char regad);
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
++void mac_init_drv(void);
++
++static void toe_init_free_queue(void);
++static void toe_init_swtx_queue(void);
++static void toe_init_default_queue(void);
++#ifdef CONFIG_SL351x_RXTOE
++static void toe_init_interrupt_queue(void);
++#endif
++static void toe_init_interrupt_config(void);
++static void toe_gmac_sw_reset(void);
++static int toe_gmac_init_chip(struct net_device *dev);
++static void toe_gmac_enable_tx_rx(struct net_device* dev);
++static void toe_gmac_disable_tx_rx(struct net_device *dev);
++static void toe_gmac_hw_start(struct net_device *dev);
++static void toe_gmac_hw_stop(struct net_device *dev);
++static int toe_gmac_clear_counter(struct net_device *dev);
++static void toe_init_gmac(struct net_device *dev);
++static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt);
++#ifdef CONFIG_SL_NAPI
++static int gmac_rx_poll(struct net_device *dev, int *budget);
++// static void toe_gmac_disable_rx(struct net_device *dev);
++// static void toe_gmac_enable_rx(struct net_device *dev);
++#endif
++
++u32 mac_read_dma_reg(int mac, unsigned int offset);
++void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
++void mac_stop_txdma(struct net_device *dev);
++void mac_get_sw_tx_weight(struct net_device *dev, char *weight);
++void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
++void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
++void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
++static inline void toe_gmac_fill_free_q(void);
++
++#ifdef VITESSE_G5SWITCH
++extern int Get_Set_port_status(void);
++extern int SPI_default(void);
++extern unsigned int SPI_get_identifier(void);
++void gmac_get_switch_status(struct net_device *dev);
++unsigned int Giga_switch=0;
++unsigned int switch_port_no=0;
++unsigned int ever_dwon=0;
++#endif
++
++/************************************************/
++/* GMAC function declare */
++/************************************************/
++static int gmac_open (struct net_device *dev);
++static int gmac_close (struct net_device *dev);
++static void gmac_cleanup_module(void);
++static void gmac_get_mac_address(void);
++
++#ifdef CONFIG_SL351x_NAT
++static void toe_init_hwtx_queue(void);
++extern void sl351x_nat_init(void);
++extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off);
++extern int sl351x_nat_output(struct sk_buff *skb, int port);
++extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev);
++extern void sl351x_toe_init(void);
++extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status);
++extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr);
++#endif
++
++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++void mac_set_rule_enable_bit(int mac, int rule, int data);
++int mac_set_rule_action(int mac, int rule, int data);
++int mac_get_MRxCRx(int mac, int rule, int ctrlreg);
++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data);
++
++/*----------------------------------------------------------------------
++* Ethernet Driver init
++*----------------------------------------------------------------------*/
++
++static int __init gmac_init_module(void)
++{
++ GMAC_INFO_T *tp;
++ struct net_device *dev;
++ int i,j;
++ unsigned int chip_id;
++// unsigned int chip_version;
++
++#ifdef CONFIG_SL3516_ASIC
++{
++ unsigned int val;
++ /* set GMAC global register */
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
++ val = val | 0x005f0000;
++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
++// writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board
++ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20);
++// writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++
++ //debug_Aaron
++ //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++ writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
++
++ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24);
++ writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C);
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
++ if((val&(1<<20))==0){ // GMAC1 enable
++ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
++ val = (val & 0xe7ffffff) | 0x08000000;
++ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
++ }
++}
++#endif
++
++#ifdef VITESSE_G5SWITCH
++ Giga_switch = SPI_get_identifier();
++ if(Giga_switch)
++ switch_port_no = SPI_default();
++#endif
++
++ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
++ if (chip_id == 0x3512C1)
++ {
++ writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board
++ writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board
++ }
++//#endif
++
++ mac_init_drv();
++
++ printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__);
++
++// init_waitqueue_entry(&wait, current);
++
++ // printk("GMAC Init......\n");
++
++ i = 0;
++ for(j = 0; i<CONFIG_MAC_NUM; j++)
++ {
++ i=j;
++ if(Giga_switch){ // if gswitch present, swap eth0/1
++ if(j==0)
++ i=1;
++ else if(j==1)
++ i=0;
++ }
++
++ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
++ tp->dev = NULL;
++ if (tp->existed != GMAC_EXISTED_FLAG) continue;
++
++ dev = alloc_etherdev(0);
++ if (dev == NULL)
++ {
++ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
++ return -ENOMEM;
++ }
++
++ dev->priv=tp;
++ tp->dev = dev;
++
++ SET_MODULE_OWNER(dev);
++
++ // spin_lock_init(&tp->lock);
++ spin_lock_init(&gmac_fq_lock);
++ dev->base_addr = tp->base_addr;
++ dev->irq = tp->irq;
++ dev->open = gmac_open;
++ dev->stop = gmac_close;
++ dev->hard_start_xmit = gmac_start_xmit;
++ dev->get_stats = gmac_get_stats;
++ dev->set_multicast_list = gmac_set_rx_mode;
++ dev->set_mac_address = gmac_set_mac_address;
++ dev->do_ioctl = gmac_netdev_ioctl;
++ dev->tx_timeout = gmac_tx_timeout;
++ dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT;
++#ifdef L2_jumbo_frame
++ dev->mtu = 2018; //2002 ,2018
++#endif
++ if (tp->port_id == 0)
++ dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM;
++ else
++ dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM;
++
++#ifdef DO_HW_CHKSUM
++ dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
++#ifdef ENABLE_TSO
++ dev->features |= NETIF_F_TSO;
++#endif
++#endif
++#ifdef CONFIG_SL_NAPI
++ dev->poll = gmac_rx_poll;
++ dev->weight = 64;
++#endif
++
++ if (register_netdev(dev))
++ {
++ gmac_cleanup_module();
++ return(-1);
++ }
++ }
++
++
++// FLAG_SWITCH = 0 ;
++// FLAG_SWITCH = SPI_get_identifier();
++// if(FLAG_SWITCH)
++// {
++// printk("Configure ADM699X...\n");
++// SPI_default(); //Add by jason for ADM699X configuration
++// }
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_cleanup_module
++*----------------------------------------------------------------------*/
++
++static void gmac_cleanup_module(void)
++{
++ int i;
++
++#ifdef SL351x_GMAC_WORKAROUND
++ del_timer(&gmac_workround_timer_obj);
++#endif
++
++ for (i=0;i<CONFIG_MAC_NUM;i++)
++ {
++ if (toe_private_data.gmac[i].dev)
++ {
++ unregister_netdev(toe_private_data.gmac[i].dev);
++ toe_private_data.gmac[i].dev = NULL;
++ }
++ }
++ return ;
++}
++
++module_init(gmac_init_module);
++module_exit(gmac_cleanup_module);
++
++
++/*----------------------------------------------------------------------
++* gmac_read_reg
++*----------------------------------------------------------------------*/
++static inline unsigned int gmac_read_reg(unsigned int base, unsigned int offset)
++//static unsigned int gmac_read_reg(unsigned int base, unsigned int offset)
++{
++ volatile unsigned int reg_val;
++
++ reg_val = readl(base + offset);
++ return (reg_val);
++}
++
++/*----------------------------------------------------------------------
++* gmac_write_reg
++*----------------------------------------------------------------------*/
++static inline void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask)
++//static void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask)
++{
++ volatile unsigned int reg_val;
++ unsigned int *addr;
++
++ reg_val = ( gmac_read_reg(base, offset) & (~bit_mask) ) | (data & bit_mask);
++ addr = (unsigned int *)(base + offset);
++ writel(reg_val,addr);
++ return;
++}
++
++/*----------------------------------------------------------------------
++* mac_init_drv
++*----------------------------------------------------------------------*/
++void mac_init_drv(void)
++{
++ TOE_INFO_T *toe;
++ int i;
++ QUEUE_THRESHOLD_T threshold;
++ u32 *destp;
++ unsigned int chip_id,chip_version;
++
++ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
++ chip_version = chip_id & 0x1 ;
++
++ if (!gmac_initialized)
++ {
++ gmac_initialized = 1;
++
++ // clear non TOE Queue Header Area
++ destp = (u32 *)TOE_NONTOE_QUE_HDR_BASE;
++ for (; destp < (u32 *)NONTOE_Q_HDR_AREA_END; destp++)
++ *destp = 0x00;
++
++ // clear TOE Queue Header Area
++ destp = (u32 *)TOE_TOE_QUE_HDR_BASE;
++ for (; destp < (u32 *)TOE_Q_HDR_AREA_END; destp++)
++ *destp = 0x00;
++
++ // init private data
++ toe = (TOE_INFO_T *)&toe_private_data;
++ memset((void *)toe, 0, sizeof(TOE_INFO_T));
++ toe->gmac[0].base_addr = GMAC0_BASE;
++ toe->gmac[1].base_addr = GMAC1_BASE;
++ toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE;
++ toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
++ toe->gmac[0].auto_nego_cfg = 1;
++ toe->gmac[1].auto_nego_cfg = 1;
++#ifdef CONFIG_SL3516_ASIC
++ toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
++ toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
++#else
++ toe->gmac[0].speed_cfg = GMAC_SPEED_100;
++ toe->gmac[1].speed_cfg = GMAC_SPEED_100;
++#endif
++ toe->gmac[0].full_duplex_cfg = 1;
++ toe->gmac[1].full_duplex_cfg = 1;
++#ifdef CONFIG_SL3516_ASIC
++ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000;
++ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000;
++#else
++ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100;
++ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100;
++#endif
++ toe->gmac[0].port_id = GMAC_PORT0;
++ toe->gmac[1].port_id = GMAC_PORT1;
++ toe->gmac[0].phy_addr = 0x1;
++ toe->gmac[1].phy_addr = 2;
++// toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0;
++ toe->gmac[0].irq =1;
++// toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1;
++ toe->gmac[1].irq =2;
++ toe->gmac[0].mac_addr1 = &eth_mac[0][0];
++ toe->gmac[1].mac_addr1 = &eth_mac[1][0];
++
++ for (i=0; i<CONFIG_MAC_NUM; i++)
++ {
++ unsigned int data, phy_vendor;
++ gmac_write_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff);
++ data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2);
++ if (data == 0x55aa55aa)
++ {
++#ifdef VITESSE_G5SWITCH
++ if(Giga_switch && (i==1)){
++ toe->gmac[i].existed = GMAC_EXISTED_FLAG;
++ break;
++ }
++#endif
++ phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr);
++ if (phy_vendor != 0 && phy_vendor != 0xffffffff)
++ toe->gmac[i].existed = GMAC_EXISTED_FLAG;
++ }
++ }
++
++ // Write GLOBAL_QUEUE_THRESHOLD_REG
++ threshold.bits32 = 0;
++ threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
++ TOE_SW_FREEQ_DESC_NUM/2;
++ threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
++ TOE_HW_FREEQ_DESC_NUM/4;
++ threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
++ TOE_TOE_DESC_NUM/4;
++ threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 :
++ TOE_INTR_DESC_NUM/4;
++ writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG);
++
++ FLAG_SWITCH = 0;
++ toe_gmac_sw_reset();
++ toe_init_free_queue();
++ toe_init_swtx_queue();
++#ifdef CONFIG_SL351x_NAT
++ toe_init_hwtx_queue();
++#endif
++ toe_init_default_queue();
++#ifdef CONFIG_SL351x_RXTOE
++ toe_init_interrupt_queue();
++#endif
++ toe_init_interrupt_config();
++
++#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
++ sl351x_hash_init();
++#else
++ {
++ volatile u32 *dp1, *dp2, dword;
++
++ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
++ {
++ *dp1++ = 0;
++ dword = *dp2++; // read-clear
++ }
++ }
++#endif
++ }
++
++#ifdef SL351x_GMAC_WORKAROUND
++#ifdef CONFIG_SL351x_NAT
++ sl351x_nat_workaround_init();
++#endif
++ init_timer(&gmac_workround_timer_obj);
++ if (chip_version == 1)
++ {
++ gmac_workround_timer_obj.expires = jiffies * 50;
++ }
++ else
++ {
++ gmac_workround_timer_obj.expires = jiffies + 2;
++ }
++ gmac_workround_timer_obj.data = (unsigned long)&gmac_workround_timer_obj;
++ gmac_workround_timer_obj.function = (void *)&sl351x_poll_gmac_hanged_status;
++ add_timer(&gmac_workround_timer_obj);
++#endif
++}
++
++/*----------------------------------------------------------------------
++* toe_init_free_queue
++* (1) Initialize the Free Queue Descriptor Base Address & size
++* Register: TOE_GLOBAL_BASE + 0x0004
++* (2) Initialize DMA Read/Write pointer for
++* SW Free Queue and HW Free Queue
++* (3) Initialize DMA Descriptors for
++* SW Free Queue and HW Free Queue,
++*----------------------------------------------------------------------*/
++static void toe_init_free_queue(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ DMA_RWPTR_T rwptr_reg;
++// unsigned int rwptr_addr;
++ unsigned int desc_buf;
++ GMAC_RXDESC_T *sw_desc_ptr;
++ struct sk_buff *skb;
++#ifdef CONFIG_SL351x_NAT
++ GMAC_RXDESC_T *desc_ptr;
++ unsigned int buf_ptr;
++#endif
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++ (dma_addr_t *)&toe->sw_freeq_desc_base_dma) ;
++ sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return;
++ }
++ memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
++
++ // DMA Queue Base & Size
++ writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER,
++ TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
++
++ // init descriptor base
++ toe->swfq_desc_base = desc_buf;
++
++ // SW Free Queue Read/Write Pointer
++ rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
++ rwptr_reg.bits.rptr = 0;
++ toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++ // SW Free Queue Descriptors
++ for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++)
++ {
++ sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE;
++ sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb
++ if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__); while(1);
++ }
++ REG32(skb->data) = (unsigned int)skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES);
++ // toe->rx_skb[i] = skb;
++ sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
++// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
++ sw_desc_ptr++;
++ }
++
++#ifdef CONFIG_SL351x_NAT
++ if (sizeof(skb->cb) < 64)
++ {
++ printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1);
++ }
++ // init hardware free queues
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++ (dma_addr_t *)&toe->hw_freeq_desc_base_dma) ;
++ desc_ptr = (GMAC_RXDESC_T *)desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return;
++ }
++ memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
++
++ // DMA Queue Base & Size
++ writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER,
++ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
++
++ // init descriptor base
++ toe->hwfq_desc_base = desc_buf;
++
++ // HW Free Queue Read/Write Pointer
++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++ rwptr_reg.bits.rptr = 0;
++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++#ifndef HW_RXBUF_BY_KMALLOC
++ buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE,
++ (dma_addr_t *)&toe->hwfq_buf_base_dma);
++#else
++ buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL);
++ toe->hwfq_buf_base_dma = __pa(buf_ptr);
++#endif
++ if (!buf_ptr)
++ {
++ printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__);
++ while(1); // could not be happened, if happened, adjust the buffer descriptor number
++ return;
++ }
++
++ toe->hwfq_buf_base = buf_ptr;
++ toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE);
++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
++ {
++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
++ desc_ptr->word1.bits.sw_id = i;
++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
++ // consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE);
++ desc_ptr++;
++ buf_ptr += HW_RX_BUF_SIZE;
++ }
++#else
++ // DMA Queue Base & Size
++ writel((0) | TOE_SW_FREEQ_DESC_POWER,
++ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++ rwptr_reg.bits.rptr = 0;
++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++
++#endif
++}
++/*----------------------------------------------------------------------
++* toe_init_swtx_queue
++* (2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup
++* GMAC_SW_TX_QUEUE_BASE_REG(0x0050)
++* (2) Initialize DMA Read/Write pointer for
++* GMAC 0/1 SW TX Q0-5
++*----------------------------------------------------------------------*/
++static void toe_init_swtx_queue(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ DMA_RWPTR_T rwptr_reg;
++ unsigned int rwptr_addr;
++ unsigned int desc_buf;
++
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ // GMAC-0, SW-TXQ
++ // The GMAC-0 and GMAC-0 maybe have different descriptor number
++ // so, not use for instruction
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++ (dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ;
++ toe->gmac[0].swtxq_desc_base = desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_buf, 0, TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++ writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER,
++ TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
++
++ // GMAC0 SW TX Q0-Q5
++ rwptr_reg.bits.wptr = 0;
++ rwptr_reg.bits.rptr = 0;
++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_SW_TXQ_NUM; i++)
++ {
++ toe->gmac[0].swtxq[i].rwptr_reg = rwptr_addr;
++ toe->gmac[0].swtxq[i].desc_base = desc_buf;
++ toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM;
++ desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++ writel(rwptr_reg.bits32, rwptr_addr);
++ rwptr_addr+=4;
++ }
++
++ // GMAC-1, SW-TXQ
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++ (dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ;
++ toe->gmac[1].swtxq_desc_base = desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_buf, 0, TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++ writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER,
++ TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
++
++
++ // GMAC1 SW TX Q0-Q5
++ rwptr_reg.bits.wptr = 0;
++ rwptr_reg.bits.rptr = 0;
++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_SW_TXQ_NUM; i++)
++ {
++ toe->gmac[1].swtxq[i].rwptr_reg = rwptr_addr;
++ toe->gmac[1].swtxq[i].desc_base = desc_buf;
++ toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM;
++ desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++ writel(rwptr_reg.bits32, rwptr_addr);
++ rwptr_addr+=4;
++ }
++}
++
++/*----------------------------------------------------------------------
++* toe_init_hwtx_queue
++* (2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size
++* GMAC_HW_TX_QUEUE_BASE_REG(0x0054)
++* (2) Initialize DMA Read/Write pointer for
++* GMAC 0/1 HW TX Q0-5
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void toe_init_hwtx_queue(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ DMA_RWPTR_T rwptr_reg;
++ unsigned int rwptr_addr;
++ unsigned int desc_buf;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ // GMAC-0, HW-TXQ
++ // The GMAC-0 and GMAC-0 maybe have different descriptor number
++ // so, not use for instruction
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++ (dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ;
++ toe->gmac[0].hwtxq_desc_base = desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_buf, 0, TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++ writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER,
++ TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
++
++ // GMAC0 HW TX Q0-Q5
++ rwptr_reg.bits.wptr = 0;
++ rwptr_reg.bits.rptr = 0;
++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ toe->gmac[0].hwtxq[i].desc_base = desc_buf;
++ desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++ writel(rwptr_reg.bits32, rwptr_addr);
++ rwptr_addr+=4;
++ }
++
++ // GMAC-1, HW-TXQ
++ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
++ (dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ;
++ toe->gmac[1].hwtxq_desc_base = desc_buf;
++ if (!desc_buf)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_buf, 0, TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
++ writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER,
++ TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
++
++ // GMAC1 HW TX Q0-Q5
++ rwptr_reg.bits.wptr = 0;
++ rwptr_reg.bits.rptr = 0;
++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ toe->gmac[1].hwtxq[i].desc_base = desc_buf;
++ desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
++ writel(rwptr_reg.bits32, rwptr_addr);
++ rwptr_addr+=4;
++ }
++}
++#endif
++
++/*----------------------------------------------------------------------
++* toe_init_default_queue
++* (1) Initialize the default 0/1 Queue Header
++* Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000)
++* TOE_DEFAULT_Q1_HDR_BASE (0x60002008)
++* (2) Initialize Descriptors of Default Queue 0/1
++*----------------------------------------------------------------------*/
++static void toe_init_default_queue(void)
++{
++ TOE_INFO_T *toe;
++ volatile NONTOE_QHDR_T *qhdr;
++ GMAC_RXDESC_T *desc_ptr;
++ DMA_SKB_SIZE_T skb_size;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++ if (!desc_ptr)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
++ toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
++ toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
++ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
++ qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
++ qhdr->word1.bits32 = 0;
++ toe->gmac[0].rx_rwptr.bits32 = 0;
++ toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++ if (!desc_ptr)
++ {
++ printk("%s::DMA_MALLOC fail !\n",__func__);
++ return ;
++ }
++ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T));
++ toe->gmac[1].default_desc_base = (unsigned int)desc_ptr;
++ toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM;
++ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE;
++ qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER;
++ qhdr->word1.bits32 = 0;
++ toe->gmac[1].rx_rwptr.bits32 = 0;
++ toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++
++ skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE;
++ skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE;
++ writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG);
++}
++
++/*----------------------------------------------------------------------
++* toe_init_interrupt_queue
++* (1) Initialize the Interrupt Queue Header
++* Register: TOE_INTR_Q_HDR_BASE (0x60002080)
++* (2) Initialize Descriptors of Interrupt Queues
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void toe_init_interrupt_queue(void)
++{
++ TOE_INFO_T *toe;
++ volatile NONTOE_QHDR_T *qhdr;
++ INTR_QHDR_T *desc_ptr;
++ // unsigned int desc_buf_addr;
++ int i;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)),
++ (dma_addr_t *)&toe->intr_desc_base_dma);
++ if (!desc_ptr)
++ {
++ printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__);
++ return ;
++ }
++ /*
++ desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)),
++ (dma_addr_t *)&toe->intr_buf_base_dma);
++ if (!desc_buf_addr)
++ {
++ printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__);
++ return ;
++ }*/
++ printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr);
++
++ memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T));
++// memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T));
++ toe->intr_desc_base = (unsigned int)desc_ptr;
++ toe->intr_desc_num = TOE_INTR_DESC_NUM;
++
++ qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE;
++// intrq = (INTRQ_INFO_T*) &toe->intrq[0];
++ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, qhdr++)
++ {
++ qhdr->word0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER;
++ qhdr->word1.bits32 = 0;
++ desc_ptr += TOE_INTR_DESC_NUM;
++ }
++}
++
++#endif
++
++/*----------------------------------------------------------------------
++* toe_init_interrupt_config
++* Interrupt Select Registers are used to map interrupt to int0 or int1
++* Int0 and int1 are wired to CPU 0/1 GMAC 0/1
++* Interrupt Device Inteface data are used to pass device info to
++* upper device deiver or store status/statistics
++* ISR handler
++* (1) If status bit ON but masked, the prinf error message (bug issue)
++* (2) If select bits are for me, handle it, else skip to let
++* the other ISR handles it.
++* Notes:
++* GMACx init routine (for eCOS) or open routine (for Linux)
++* enable the interrupt bits only which are selected for him.
++*
++* Default Setting:
++* GMAC0 intr bits ------> int0 ----> eth0
++* GMAC1 intr bits ------> int1 ----> eth1
++* TOE intr -------------> int0 ----> eth0
++* Classification Intr --> int0 ----> eth0
++* Default Q0 -----------> int0 ----> eth0
++* Default Q1 -----------> int1 ----> eth1
++*----------------------------------------------------------------------*/
++static void toe_init_interrupt_config(void)
++{
++ // clear all status bits
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++ // Init select registers
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
++ // disable all interrupt
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
++ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++}
++
++/*----------------------------------------------------------------------
++* toe_init_gmac
++*----------------------------------------------------------------------*/
++static void toe_init_gmac(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ TOE_INFO_T *toe;
++ u32 data;
++
++ if (!gmac_initialized)
++ return ;
++
++ if (!tp->existed)
++ return;
++
++ tp->dev = dev;
++ tp->flow_control_enable = 1;
++ tp->pre_phy_status = LINK_DOWN;
++ tp->full_duplex_status = tp->full_duplex_cfg;
++ tp->speed_status = tp->speed_status;
++
++#if 0
++ /* get mac address from FLASH */
++ gmac_get_mac_address();
++#endif
++
++ /* set PHY register to start autonegition process */
++ gmac_set_phy_status(dev);
++
++ /* GMAC initialization */
++ if ( toe_gmac_init_chip(dev) )
++ {
++ printk ("GMAC %d init fail\n", tp->port_id);
++ }
++
++ /* clear statistic counter */
++ toe_gmac_clear_counter(dev);
++
++ memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats));
++
++ /* -----------------------------------------------------------
++ Enable GMAC interrupt & disable loopback
++ Notes:
++ GMACx init routine (for eCOS) or open routine (for Linux)
++ enable the interrupt bits only which are selected for him.
++ --------------------------------------------------------------*/
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ // Enable Interrupt Bits
++ if (tp->port_id == 0)
++ {
++ tp->intr0_selected = GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |
++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |
++ GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT |
++ GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT |
++ GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT |
++ GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT |
++ GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT |
++ GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
++
++#ifdef GMAX_TX_INTR_DISABLED
++ tp->intr0_enabled = 0;
++#else
++ tp->intr0_enabled = GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
++#endif
++
++ tp->intr1_selected = TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS |
++ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
++ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT |
++ DEFAULT_Q0_INT_BIT;
++ tp->intr1_enabled = DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS;
++ tp->intr2_selected = 0xffffffff; // TOE Queue 32-63 FUUL Intr
++ tp->intr2_enabled = 0xffffffff;
++ tp->intr3_selected = 0xffffffff; // TOE Queue 0-31 FUUL Intr
++ tp->intr3_enabled = 0xffffffff;
++ tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
++ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
++ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
++
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ }
++ else
++ {
++ tp->intr0_selected = GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |
++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT |
++ GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT |
++ GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT |
++ GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT |
++ GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT |
++ GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT |
++ GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
++#ifdef GMAX_TX_INTR_DISABLED
++ tp->intr0_enabled = 0;
++#else
++ tp->intr0_enabled = GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
++#endif
++
++ tp->intr1_selected = DEFAULT_Q1_INT_BIT;
++ tp->intr1_enabled = DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS;
++ tp->intr2_selected = 0; // TOE Queue 32-63 FUUL Intr
++ tp->intr2_enabled = 0;
++ tp->intr3_selected = 0; // TOE Queue 0-31 FUUL Intr
++ tp->intr3_enabled = 0;
++ tp->intr4_selected = GMAC1_INT_BITS;
++ tp->intr4_enabled = GMAC1_INT_BITS;
++
++ if (toe->gmac[0].existed != GMAC_EXISTED_FLAG)
++ {
++ tp->intr1_selected |= TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS |
++ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
++ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT;
++ tp->intr1_enabled |= TOE_IQ_ALL_BITS;
++ tp->intr2_selected |= 0xffffffff; // TOE Queue 32-63 FUUL Intr
++ tp->intr2_enabled |= 0xffffffff;
++ tp->intr3_selected |= 0xffffffff; // TOE Queue 0-31 FUUL Intr
++ tp->intr3_enabled |= 0xffffffff;
++ tp->intr4_selected |= CLASS_RX_FULL_INT_BITS |
++ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
++ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT;
++ }
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected;
++ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ }
++
++ // enable only selected bits
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG,
++ tp->intr0_enabled, tp->intr0_selected);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG,
++ tp->intr1_enabled, tp->intr1_selected);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG,
++ tp->intr2_enabled, tp->intr2_selected);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG,
++ tp->intr3_enabled, tp->intr3_selected);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++ tp->intr4_enabled, tp->intr4_selected);
++
++ /* start DMA process */
++ toe_gmac_hw_start(dev);
++
++ /* enable tx/rx register */
++ toe_gmac_enable_tx_rx(dev);
++
++// toe_gmac_enable_interrupt(tp->irq);
++
++ return ;
++}
++
++
++/*----------------------------------------------------------------------
++* toe_gmac_sw_reset
++*----------------------------------------------------------------------*/
++static void toe_gmac_sw_reset(void)
++{
++ unsigned int reg_val;
++ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060; /* GMAC0 S/W reset */
++ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG);
++ udelay(100);
++ return;
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_init_chip
++*----------------------------------------------------------------------*/
++static int toe_gmac_init_chip(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG2_T config2_val;
++ GMAC_CONFIG0_T config0,config0_mask;
++ GMAC_CONFIG1_T config1;
++ #ifdef CONFIG_SL351x_NAT
++ GMAC_CONFIG3_T config3_val;
++ #endif
++ GMAC_TX_WCR0_T hw_weigh;
++ GMAC_TX_WCR1_T sw_weigh;
++// GMAC_HASH_ENABLE_REG0_T hash_ctrl;
++//
++#if 0 /* mac address will be set in late_initcall */
++ struct sockaddr sock;
++ // GMAC_AHB_WEIGHT_T ahb_weight, ahb_weight_mask;
++
++
++ /* set station MAC address1 and address2 */
++ memcpy(&sock.sa_data[0],&eth_mac[tp->port_id][0],6);
++ gmac_set_mac_address(dev,(void *)&sock);
++#endif
++
++ /* set RX_FLTR register to receive all multicast packet */
++ gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
++ // gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
++ //gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f);
++
++ /* set per packet buffer size */
++ // config1.bits32 = 0x002004; //next version
++ /* set flow control threshold */
++ config1.bits32 = 0;
++ config1.bits.set_threshold = 32 / 2;
++ config1.bits.rel_threshold = 32 / 4 * 3;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
++
++ /* set flow control threshold */
++ config2_val.bits32 = 0;
++ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
++ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
++
++ #ifdef CONFIG_SL351x_NAT
++ /* set HW free queue flow control threshold */
++ config3_val.bits32 = 0;
++ config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
++ config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
++ #endif
++ /* set_mcast_filter mask*/
++ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
++ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
++
++ /* disable TX/RX and disable internal loop back */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++
++ //debug_Aaron
++#ifdef L2_jumbo_frame
++ config0.bits.max_len = 5;
++#else
++ config0.bits.max_len = 2;
++#endif
++
++ if (tp->flow_control_enable==1)
++ {
++ config0.bits.tx_fc_en = 1; /* enable tx flow control */
++ config0.bits.rx_fc_en = 1; /* enable rx flow control */
++ printk("Enable MAC Flow Control...\n");
++ }
++ else
++ {
++ config0.bits.tx_fc_en = 0; /* disable tx flow control */
++ config0.bits.rx_fc_en = 0; /* disable rx flow control */
++ printk("Disable MAC Flow Control...\n");
++ }
++ config0.bits.dis_rx = 1; /* disable rx */
++ config0.bits.dis_tx = 1; /* disable tx */
++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
++ config0.bits.rx_err_detect = 1;
++ config0.bits.rgmii_en = 0;
++ config0.bits.rgmm_edge = 1;
++ config0.bits.rxc_inv = 0;
++ config0.bits.ipv4_rx_chksum = 1; /* enable H/W to check ip checksum */
++ config0.bits.ipv6_rx_chksum = 1; /* enable H/W to check ip checksum */
++ config0.bits.port0_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM
++ config0.bits.port1_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM
++ config0.bits.port0_chk_toeq = 1;
++ config0.bits.port1_chk_toeq = 1;
++ config0.bits.port0_chk_classq = 1;
++ config0.bits.port1_chk_classq = 1;
++
++ config0_mask.bits.max_len = 7;
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ config0_mask.bits.loop_back = 1;
++ config0_mask.bits.rgmii_en = 1;
++ config0_mask.bits.rgmm_edge = 1;
++ config0_mask.bits.rxc_inv = 1;
++ config0_mask.bits.ipv4_rx_chksum = 1;
++ config0_mask.bits.ipv6_rx_chksum = 1;
++ config0_mask.bits.port0_chk_hwq = 1;
++ config0_mask.bits.port1_chk_hwq = 1;
++ config0_mask.bits.port0_chk_toeq = 1;
++ config0_mask.bits.port1_chk_toeq = 1;
++ config0_mask.bits.port0_chk_classq = 1;
++ config0_mask.bits.port1_chk_classq = 1;
++ config0_mask.bits.rx_err_detect = 1;
++
++ #if 0
++ config0.bits.dis_rx = 1; /* disable rx */
++ config0.bits.dis_tx = 1; /* disable tx */
++ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
++ config0.bits.txc_inv = 0;
++ config0.bits.rgmii_en = 0;
++ config0.bits.rgmm_edge = 1;
++ config0.bits.rxc_inv = 1;
++ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */
++ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */
++
++ config0_mask.bits.max_len = 3;
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ config0_mask.bits.loop_back = 1;
++ config0_mask.bits.rgmii_en = 1;
++ config0_mask.bits.rgmm_edge = 1;
++ config0_mask.bits.txc_inv = 1;
++ config0_mask.bits.rxc_inv = 1;
++ config0_mask.bits.ipv4_tss_rx_en = 1;
++ config0_mask.bits.ipv6_tss_rx_en = 1;
++ #endif
++
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++
++ #if 1
++ hw_weigh.bits32 = 0;
++ hw_weigh.bits.hw_tq3 = 1;
++ hw_weigh.bits.hw_tq2 = 1;
++ hw_weigh.bits.hw_tq1 = 1;
++ hw_weigh.bits.hw_tq0 = 1;
++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
++
++ sw_weigh.bits32 = 0;
++ sw_weigh.bits.sw_tq5 = 1;
++ sw_weigh.bits.sw_tq4 = 1;
++ sw_weigh.bits.sw_tq3 = 1;
++ sw_weigh.bits.sw_tq2 = 1;
++ sw_weigh.bits.sw_tq1 = 1;
++ sw_weigh.bits.sw_tq0 = 1;
++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
++ #endif
++
++ #if 0
++ ahb_weight.bits32 = 0;
++ ahb_weight_mask.bits32 = 0;
++ ahb_weight.bits.rx_weight = 1;
++ ahb_weight.bits.tx_weight = 1;
++ ahb_weight.bits.hash_weight = 1;
++ ahb_weight.bits.pre_req = 0x1f;
++ ahb_weight.bits.tqDV_threshold = 0;
++ ahb_weight_mask.bits.rx_weight = 0x1f;
++ ahb_weight_mask.bits.tx_weight = 0x1f;
++ ahb_weight_mask.bits.hash_weight = 0x1f;
++ ahb_weight_mask.bits.pre_req = 0x1f;
++ ahb_weight_mask.bits.tqDV_threshold = 0x1f;
++ gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
++ #endif
++
++ #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
++ #endif
++ #ifdef CONFIG_SL351x_NAT
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff);
++ gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff);
++
++ sl351x_nat_init();
++ #endif
++
++ #ifdef CONFIG_SL351x_RXTOE
++ /* setup matching rule to TOE */
++ sl351x_toe_init();
++ #endif
++
++ // for A1 ASIC version
++// hash_ctrl.bits32 = 0;
++// hash_ctrl.bits.timing = 6;
++// gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff);
++
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_enable_tx_rx
++*----------------------------------------------------------------------*/
++static void toe_gmac_enable_tx_rx(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 0; /* enable rx */
++ config0.bits.dis_tx = 0; /* enable tx */
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++/*----------------------------------------------------------------------
++* toe_gmac_disable_rx
++*----------------------------------------------------------------------*/
++#if 0
++static void toe_gmac_disable_rx(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 1; /* disable rx */
++// config0.bits.dis_tx = 1; /* disable tx */
++ config0_mask.bits.dis_rx = 1;
++// config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_gmac_enable_rx
++*----------------------------------------------------------------------*/
++#if 0
++static void toe_gmac_enable_rx(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 0; /* enable rx */
++// config0.bits.dis_tx = 0; /* enable tx */
++ config0_mask.bits.dis_rx = 1;
++// config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_gmac_disable_tx_rx
++*----------------------------------------------------------------------*/
++static void toe_gmac_disable_tx_rx(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++
++ /* enable TX/RX */
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.dis_rx = 1; /* disable rx */
++ config0.bits.dis_tx = 1; /* disable tx */
++ config0_mask.bits.dis_rx = 1;
++ config0_mask.bits.dis_tx = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_hw_start
++*----------------------------------------------------------------------*/
++static void toe_gmac_hw_start(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++
++ /* program dma control register */
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.rd_enable = 1;
++ dma_ctrl.bits.td_enable = 1;
++ dma_ctrl.bits.loopback = 0;
++ dma_ctrl.bits.drop_small_ack = 0;
++ dma_ctrl.bits.rd_prot = 0;
++ dma_ctrl.bits.rd_burst_size = 3;
++ dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES;
++ dma_ctrl.bits.rd_bus = 3;
++ dma_ctrl.bits.td_prot = 0;
++ dma_ctrl.bits.td_burst_size = 3;
++ dma_ctrl.bits.td_bus = 3;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.rd_enable = 1;
++ dma_ctrl_mask.bits.td_enable = 1;
++ dma_ctrl_mask.bits.loopback = 1;
++ dma_ctrl_mask.bits.drop_small_ack = 1;
++ dma_ctrl_mask.bits.rd_prot = 3;
++ dma_ctrl_mask.bits.rd_burst_size = 3;
++ dma_ctrl_mask.bits.rd_insert_bytes = 3;
++ dma_ctrl_mask.bits.rd_bus = 3;
++ dma_ctrl_mask.bits.td_prot = 0x0f;
++ dma_ctrl_mask.bits.td_burst_size = 3;
++ dma_ctrl_mask.bits.td_bus = 3;
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++
++ return;
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_hw_stop
++*----------------------------------------------------------------------*/
++static void toe_gmac_hw_stop(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++ /* program dma control register */
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.rd_enable = 0;
++ dma_ctrl.bits.td_enable = 0;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.rd_enable = 1;
++ dma_ctrl_mask.bits.td_enable = 1;
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_clear_counter
++*----------------------------------------------------------------------*/
++static int toe_gmac_clear_counter (struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++ /* clear counter */
++ gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS);
++ gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS);
++ gmac_read_reg(tp->base_addr, GMAC_IN_MCAST);
++ gmac_read_reg(tp->base_addr, GMAC_IN_BCAST);
++ gmac_read_reg(tp->base_addr, GMAC_IN_MAC1);
++ gmac_read_reg(tp->base_addr, GMAC_IN_MAC2);
++ tp->ifStatics.tx_bytes = 0;
++ tp->ifStatics.tx_packets = 0;
++ tp->ifStatics.tx_errors = 0;
++ tp->ifStatics.rx_bytes = 0;
++ tp->ifStatics.rx_packets = 0;
++ tp->ifStatics.rx_errors = 0;
++ tp->ifStatics.rx_dropped = 0;
++ return (0);
++}
++
++
++/*----------------------------------------------------------------------
++* toe_gmac_tx_complete
++*----------------------------------------------------------------------*/
++static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid,
++ struct net_device *dev, int interrupt)
++{
++ volatile GMAC_TXDESC_T *curr_desc;
++ GMAC_TXDESC_0_T word0;
++ GMAC_TXDESC_1_T word1;
++ unsigned int desc_count;
++// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++ GMAC_SWTXQ_T *swtxq;
++ DMA_RWPTR_T rwptr;
++
++ /* get tx H/W completed descriptor virtual address */
++ /* check tx status and accumulate tx statistics */
++ swtxq = &tp->swtxq[tx_qid];
++ swtxq->intr_cnt++;
++ for (;;)
++ {
++ rwptr.bits32 = readl(swtxq->rwptr_reg);
++ if (rwptr.bits.rptr == swtxq->finished_idx)
++ break;
++ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
++ word0.bits32 = curr_desc->word0.bits32;
++ word1.bits32 = curr_desc->word1.bits32;
++
++ if (word0.bits.status_tx_ok)
++ {
++ tp->ifStatics.tx_bytes += word1.bits.byte_count;
++ desc_count = word0.bits.desc_count;
++ if (desc_count==0)
++ {
++ printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count);
++ while(1);
++ }
++ while (--desc_count)
++ {
++ word0.bits.status_tx_ok = 0;
++ curr_desc->word0.bits32 = word0.bits32;
++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++ word0.bits32 = curr_desc->word0.bits32;
++#ifdef _DUMP_TX_TCP_CONTENT
++ if (curr_desc->word0.bits.buffer_size < 16)
++ {
++ int a;
++ char *datap;
++ printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr);
++ datap = (char *)__va(curr_desc->word2.buf_adr);
++ for (a=0; a<8 && a<curr_desc->word0.bits.buffer_size; a++, datap++)
++ {
++ printk("0x%02x ", *datap);
++ }
++ printk("\n");
++ }
++#endif
++ }
++
++ word0.bits.status_tx_ok = 0;
++ if (swtxq->tx_skb[swtxq->finished_idx])
++ {
++ if (interrupt)
++ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
++ else
++ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
++ swtxq->tx_skb[swtxq->finished_idx] = NULL;
++ }
++ curr_desc->word0.bits32 = word0.bits32;
++ swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
++ swtxq->total_finished++;
++ tp->ifStatics.tx_packets++;
++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++ }
++ else
++ {
++ // tp->ifStatics.tx_errors++;
++ // printk("%s::Tx Descriptor is !!!\n",__func__);
++ // wait ready by breaking
++ break;
++ }
++ }
++
++ if (netif_queue_stopped(dev))
++ {
++ netif_wake_queue(dev);
++ }
++}
++
++/*----------------------------------------------------------------------
++* gmac_start_xmit
++*----------------------------------------------------------------------*/
++static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ GMAC_INFO_T *tp= dev->priv;
++// static unsigned int pcount = 0;
++// unsigned int tx_qid;
++ DMA_RWPTR_T rwptr;
++ volatile GMAC_TXDESC_T *curr_desc;
++ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
++ int frag_id = 0;
++ int len, total_len = skb->len;
++ struct net_device_stats *isPtr;
++ unsigned int free_desc;
++ GMAC_SWTXQ_T *swtxq;
++ register unsigned long word0, word1, word2, word3;
++ unsigned short wptr, rptr;
++#ifdef L2_jumbo_frame
++ int header_len = skb->len;
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ int tcp_hdr_len;
++ unsigned char *ptr;
++ int data_len,a;
++ unsigned int val;
++#endif
++
++#ifdef GMAC_LEN_1_2_ISSUE
++ int total_pages;
++ total_pages = snd_pages;
++#endif
++
++ isPtr = (struct net_device_stats *)&tp->ifStatics;
++#if 1
++ if (skb->len >= 0x10000)
++ {
++// spin_unlock(&tp->tx_mutex);
++ isPtr->tx_dropped++;
++ printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len);
++ netif_stop_queue(dev);
++ return 1;
++ }
++#endif
++
++#if 0
++ if (storlink_ctl.recvfile==2)
++ {
++ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
++ }
++#endif
++
++#ifdef GMAC_USE_TXQ0
++ #define tx_qid 0
++#endif
++
++ swtxq = &tp->swtxq[tx_qid];
++
++// spin_lock(&tp->tx_mutex);
++ rwptr.bits32 = readl(swtxq->rwptr_reg);
++ wptr = rwptr.bits.wptr;
++ rptr = rwptr.bits.rptr;
++
++ // check finished desc or empty BD
++ // cannot check by read ptr of RW PTR register,
++ // because the HW complete to send but the SW may NOT handle it
++#ifndef GMAX_TX_INTR_DISABLED
++ if (wptr >= swtxq->finished_idx)
++ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++ else
++ free_desc = swtxq->finished_idx - wptr - 1;
++
++ if (free_desc < snd_pages)
++ {
++// spin_unlock(&tp->tx_mutex);
++ isPtr->tx_dropped++;
++// printk("GMAC %d No available descriptor!\n", tp->port_id);
++ netif_stop_queue(dev);
++ return 1;
++ }
++#else
++ toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++
++ if (wptr >= swtxq->finished_idx)
++ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++ else
++ free_desc = swtxq->finished_idx - wptr - 1;
++ if (free_desc < snd_pages)
++ {
++// spin_unlock(&tp->tx_mutex);
++ isPtr->tx_dropped++;
++// printk("GMAC %d No available descriptor!\n", tp->port_id);
++ netif_stop_queue(dev);
++ return 1;
++ }
++
++#if 0
++ printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx);
++ if ((free_desc < (snd_pages << 2)) ||
++ (free_desc < (swtxq->total_desc_num >> 2)))
++ {
++ printk("2: free_desc = %d\n", free_desc);
++ toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++ rwptr.bits32 = readl(swtxq->rwptr_reg);
++ wptr = rwptr.bits.wptr;
++ if (wptr>= swtxq->finished_idx)
++ free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx;
++ else
++ free_desc = swtxq->finished_idx - wptr - 1;
++ }
++#endif
++#endif
++
++#ifdef L2_jumbo_frame
++// data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
++// if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP))
++// if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP)))
++ if (((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP))
++ {
++ ip_hdr = (struct iphdr*)(skb->nh.iph);
++ tcp_hdr = (struct tcphdr*)(skb->h.th);
++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
++ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
++
++ if ((skb->h.th->syn) && (tcp_hdr_len > 20))
++ {
++ ptr = (unsigned char *)(tcp_hdr+1);
++ if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962 ,0x07ba=2032-54=1978
++ {
++ ptr[2]=0x20; //23
++ ptr[3]=0x00; //00
++ printk("-----> Change MSS to 8K \n" );
++ }
++ }
++ }
++// if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP)
++// if ((tcp_hdr_len > 20) && (skb->h.th->syn))
++#endif
++
++
++#if 0
++ if (snd_pages > 1)
++ printk("-----> snd_pages=%d\n", snd_pages);
++ if (total_len > 1514)
++ {
++ printk("-----> total_len=%d\n", total_len);
++ }
++#endif
++
++ while (snd_pages)
++ {
++ char *pkt_datap;
++
++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr;
++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
++#if 0
++//#if (GMAC_DEBUG==1)
++ // if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it
++ // if (curr_desc->word2.buf_adr)
++ if (swtxq->tx_skb[wptr])
++ {
++ printk("Error! Stop due to TX descriptor's buffer is not freed!\n");
++ while(1);
++ dev_kfree_skb(swtxq->tx_skb[wptr]);
++ swtxq->tx_skb[wptr] = NULL;
++ }
++#endif
++
++ if (frag_id == 0)
++ {
++#if 0
++ int i;
++ pkt_datap = skb->data;
++ len = total_len;
++ for (i=0; i<skb_shinfo(skb)->nr_frags; i++)
++ {
++ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
++ len -= frag->size;
++ }
++#else
++ pkt_datap = skb->data;
++ len = total_len - skb->data_len;
++#endif
++ }
++ else
++ {
++ skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1];
++ pkt_datap = page_address(frag->page) + frag->page_offset;
++ len = frag->size;
++ if (len > total_len)
++ {
++ printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n",
++ len, total_len);
++ }
++ }
++
++ /* set TX descriptor */
++ /* copy packet to descriptor buffer address */
++ // curr_desc->word0.bits32 = len; /* total frame byte count */
++ word0 = len;
++#ifdef L2_jumbo_frame
++ word3 = (dev->mtu+14) | EOFIE_BIT; //2016 ,2032
++#else
++ word3 = 1514 | EOFIE_BIT;
++#endif
++
++#ifdef DO_HW_CHKSUM
++#ifdef L2_jumbo_frame
++ if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
++#else
++ if (total_len <= 1514 && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
++#endif
++ word1 = total_len |
++ TSS_IP_CHKSUM_BIT |
++ TSS_IPV6_ENABLE_BIT |
++ TSS_MTU_ENABLE_BIT;
++ else
++ word1 = total_len |
++ TSS_UDP_CHKSUM_BIT |
++ TSS_TCP_CHKSUM_BIT |
++ TSS_IP_CHKSUM_BIT |
++ TSS_IPV6_ENABLE_BIT |
++ TSS_MTU_ENABLE_BIT;
++#else
++ word1 = total_len | TSS_MTU_ENABLE_BIT;
++#endif
++ word2 = (unsigned long)__pa(pkt_datap);
++
++ if (frag_id == 0)
++ {
++ word3 |= SOF_BIT; // SOF
++ }
++
++ if (snd_pages == 1)
++ {
++ word3 |= EOF_BIT; // EOF
++ swtxq->tx_skb[wptr] = skb;
++#ifdef CONFIG_SL351x_NAT
++ if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id))
++ word1 |= TSS_IP_FIXED_LEN_BIT;
++#endif
++ }
++ else
++ swtxq->tx_skb[wptr] = NULL;
++ // word1 |= TSS_IP_FIXED_LEN_BIT;
++#if 1
++#ifdef CONFIG_SL351x_RXTOE
++ // check if this frame has the mission to enable toe hash entry..
++ // if rx_max_pktsize ==0, do not enable RXTOE
++ if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) {
++ set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev);
++ }
++#endif
++#endif
++#ifdef _DUMP_TX_TCP_CONTENT
++ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
++ {
++ int a;
++ char *datap;
++ printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap);
++ datap = (char *)pkt_datap;
++ for (a=0; a<8 && a<len; a++, datap++)
++ {
++ printk("0x%02x ", *datap);
++ }
++ printk("\n");
++ }
++#endif
++
++#ifdef GMAC_LEN_1_2_ISSUE
++ if ((total_pages!=snd_pages) && (len == 1 || len == 2 ) && ((u32)pkt_datap & 0x03))
++ {
++ memcpy((void *)&_debug_prefetch_buf[_debug_prefetch_cnt][0], pkt_datap, len);
++ pkt_datap = (char *)&_debug_prefetch_buf[_debug_prefetch_cnt][0];
++ word2 = (unsigned long)__pa(pkt_datap);
++ _debug_prefetch_cnt++;
++ if (_debug_prefetch_cnt >= _DEBUG_PREFETCH_NUM)
++ _debug_prefetch_cnt = 0;
++ }
++#endif
++
++ consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE);
++ wmb();
++ curr_desc->word0.bits32 = word0;
++ curr_desc->word1.bits32 = word1;
++ curr_desc->word2.bits32 = word2;
++ curr_desc->word3.bits32 = word3;
++ swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc;
++// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE);
++#ifdef _DUMP_TX_TCP_CONTENT
++ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
++ {
++ int a;
++ char *datap;
++ printk("\t 0x%08x: ", (u32)pkt_datap);
++ datap = (char *)pkt_datap;
++ for (a=0; a<8 && a<len; a++, datap++)
++ {
++ printk("0x%02x ", *datap);
++ }
++ printk("\n");
++ }
++#endif
++ free_desc--;
++ wmb();
++ wptr = RWPTR_ADVANCE_ONE(wptr, swtxq->total_desc_num);
++ frag_id++;
++ snd_pages--;
++ }
++
++ swtxq->total_sent++;
++ SET_WPTR(swtxq->rwptr_reg, wptr);
++ dev->trans_start = jiffies;
++
++
++ // printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc);
++//#ifdef GMAX_TX_INTR_DISABLED
++// toe_gmac_tx_complete(tp, tx_qid, dev, 0);
++//#endif
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_mac_address
++*----------------------------------------------------------------------*/
++
++static int gmac_set_mac_address(struct net_device *dev, void *addr)
++{
++ GMAC_INFO_T *tp= dev->priv;
++ struct sockaddr *sock;
++ unsigned int reg_val;
++ unsigned int i;
++
++ sock = (struct sockaddr *) addr;
++ for (i = 0; i < 6; i++)
++ {
++ dev->dev_addr[i] = sock->sa_data[i];
++ }
++
++ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
++ gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff);
++ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8);
++ gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff);
++ memcpy(&eth_mac[tp->port_id][0],&dev->dev_addr[0],6);
++
++ printk("Storlink %s address = ",dev->name);
++ printk("%02x",dev->dev_addr[0]);
++ printk("%02x",dev->dev_addr[1]);
++ printk("%02x",dev->dev_addr[2]);
++ printk("%02x",dev->dev_addr[3]);
++ printk("%02x",dev->dev_addr[4]);
++ printk("%02x\n",dev->dev_addr[5]);
++
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_mac_address
++* get mac address from FLASH
++*----------------------------------------------------------------------*/
++static void gmac_get_mac_address(void)
++{
++#ifdef CONFIG_MTD
++ extern int get_vlaninfo(vlaninfo* vlan);
++ static vlaninfo vlan[2];
++
++ if (get_vlaninfo(&vlan[0]))
++ {
++ memcpy((void *)&eth_mac[0][0],vlan[0].mac,6);
++ // VLAN_conf[0].vid = vlan[0].vlanid;
++ // VLAN_conf[0].portmap = vlan[0].vlanmap;
++ memcpy((void *)&eth_mac[1][0],vlan[1].mac,6);
++ // VLAN_conf[1].vid = vlan[1].vlanid;
++ // VLAN_conf[1].portmap = vlan[1].vlanmap;
++ }
++#else
++ unsigned int reg_val;
++
++ reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac);
++ eth_mac[0][4] = (reg_val & 0xff00) >> 8;
++ eth_mac[0][5] = reg_val & 0x00ff;
++ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
++ eth_mac[1][4] = (reg_val & 0xff00) >> 8;
++ eth_mac[1][5] = reg_val & 0x00ff;
++#endif
++ return;
++}
++
++
++/*----------------------------------------------------------------------
++* mac_stop_txdma
++*----------------------------------------------------------------------*/
++void mac_stop_txdma(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
++
++ // wait idle
++ do
++ {
++ txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG);
++ } while (txdma_busy.bits.td_busy);
++
++ /* program dma control register */
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.rd_enable = 0;
++ dma_ctrl.bits.td_enable = 0;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.rd_enable = 1;
++ dma_ctrl_mask.bits.td_enable = 1;
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++/*----------------------------------------------------------------------
++* mac_start_txdma
++*----------------------------------------------------------------------*/
++void mac_start_txdma(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++ /* program dma control register */
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.rd_enable = 1;
++ dma_ctrl.bits.td_enable = 1;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.rd_enable = 1;
++ dma_ctrl_mask.bits.td_enable = 1;
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++}
++
++
++/*----------------------------------------------------------------------
++* gmac_get_stats
++*----------------------------------------------------------------------*/
++
++struct net_device_stats * gmac_get_stats(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ // unsigned int flags;
++ unsigned int pkt_drop;
++ unsigned int pkt_error;
++
++ if (netif_running(dev))
++ {
++ /* read H/W counter */
++ // spin_lock_irqsave(&tp->lock,flags);
++ pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
++ pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
++ tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
++ tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
++ // spin_unlock_irqrestore(&tp->lock,flags);
++ }
++ return &tp->ifStatics;
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_get_sw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_get_sw_tx_weight(struct net_device *dev, char *weight)
++{
++ GMAC_TX_WCR1_T sw_weigh;
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++ sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG);
++
++ weight[0] = sw_weigh.bits.sw_tq0;
++ weight[1] = sw_weigh.bits.sw_tq1;
++ weight[2] = sw_weigh.bits.sw_tq2;
++ weight[3] = sw_weigh.bits.sw_tq3;
++ weight[4] = sw_weigh.bits.sw_tq4;
++ weight[5] = sw_weigh.bits.sw_tq5;
++}
++
++/*----------------------------------------------------------------------
++* mac_set_sw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_set_sw_tx_weight(struct net_device *dev, char *weight)
++{
++ GMAC_TX_WCR1_T sw_weigh;
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++ sw_weigh.bits32 = 0;
++ sw_weigh.bits.sw_tq0 = weight[0];
++ sw_weigh.bits.sw_tq1 = weight[1];
++ sw_weigh.bits.sw_tq2 = weight[2];
++ sw_weigh.bits.sw_tq3 = weight[3];
++ sw_weigh.bits.sw_tq4 = weight[4];
++ sw_weigh.bits.sw_tq5 = weight[5];
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
++}
++
++/*----------------------------------------------------------------------
++* mac_get_hw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_get_hw_tx_weight(struct net_device *dev, char *weight)
++{
++ GMAC_TX_WCR0_T hw_weigh;
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++ hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG);
++
++ weight[0] = hw_weigh.bits.hw_tq0;
++ weight[1] = hw_weigh.bits.hw_tq1;
++ weight[2] = hw_weigh.bits.hw_tq2;
++ weight[3] = hw_weigh.bits.hw_tq3;
++}
++
++/*----------------------------------------------------------------------
++* mac_set_hw_tx_weight
++*----------------------------------------------------------------------*/
++void mac_set_hw_tx_weight(struct net_device *dev, char *weight)
++{
++ GMAC_TX_WCR0_T hw_weigh;
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++ hw_weigh.bits32 = 0;
++ hw_weigh.bits.hw_tq0 = weight[0];
++ hw_weigh.bits.hw_tq1 = weight[1];
++ hw_weigh.bits.hw_tq2 = weight[2];
++ hw_weigh.bits.hw_tq3 = weight[3];
++
++ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
++}
++
++/*----------------------------------------------------------------------
++* mac_start_tx_dma
++*----------------------------------------------------------------------*/
++int mac_start_tx_dma(int mac)
++{
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.td_enable = 1;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.td_enable = 1;
++
++ if (mac == 0)
++ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++ else
++ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++ return 1;
++}
++
++/*----------------------------------------------------------------------
++* mac_stop_tx_dma
++*----------------------------------------------------------------------*/
++int mac_stop_tx_dma(int mac)
++{
++ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
++
++ dma_ctrl.bits32 = 0;
++ dma_ctrl.bits.td_enable = 0;
++
++ dma_ctrl_mask.bits32 = 0;
++ dma_ctrl_mask.bits.td_enable = 1;
++
++ if (mac == 0)
++ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++ else
++ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
++ return 1;
++}
++
++/*----------------------------------------------------------------------
++* mac_read_reg(int mac, unsigned int offset)
++*----------------------------------------------------------------------*/
++unsigned int mac_read_reg(int mac, unsigned int offset)
++{
++ switch (mac)
++ {
++ case 0:
++ return gmac_read_reg(TOE_GMAC0_BASE, offset);
++ case 1:
++ return gmac_read_reg(TOE_GMAC1_BASE, offset);
++ default:
++ return 0;
++ }
++}
++
++/*----------------------------------------------------------------------
++* mac_write_reg
++*----------------------------------------------------------------------*/
++void mac_write_reg(int mac, unsigned int offset, unsigned data)
++{
++ switch (mac)
++ {
++ case 0:
++ gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff);
++ break;
++ case 1:
++ gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff);
++ break;
++ }
++}
++
++/*----------------------------------------------------------------------
++* mac_read_dma_reg(int mac, unsigned int offset)
++*----------------------------------------------------------------------*/
++u32 mac_read_dma_reg(int mac, unsigned int offset)
++{
++ switch (mac)
++ {
++ case 0:
++ return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset);
++ case 1:
++ return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset);
++ default:
++ return 0;
++ }
++}
++
++/*----------------------------------------------------------------------
++* mac_write_dma_reg
++*----------------------------------------------------------------------*/
++void mac_write_dma_reg(int mac, unsigned int offset, u32 data)
++{
++ switch (mac)
++ {
++ case 0:
++ gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff);
++ break;
++ case 1:
++ gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff);
++ break;
++ }
++}
++
++/*----------------------------------------------------------------------
++* ether_crc
++*----------------------------------------------------------------------*/
++static unsigned const ethernet_polynomial = 0x04c11db7U;
++static unsigned int ether_crc (int length, unsigned char *data)
++{
++ int crc = -1;
++ unsigned int i;
++ unsigned int crc_val=0;
++
++ while (--length >= 0) {
++ unsigned char current_octet = *data++;
++ int bit;
++ for (bit = 0; bit < 8; bit++, current_octet >>= 1)
++ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
++ ethernet_polynomial : 0);
++ }
++ crc = ~crc;
++ for (i=0;i<32;i++)
++ {
++ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
++ }
++ return crc_val;
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_set_rx_mode
++*----------------------------------------------------------------------*/
++void mac_set_rx_mode(int pid, unsigned int data)
++{
++ unsigned int base;
++
++ base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE;
++
++ gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f);
++ return;
++}
++
++
++/*----------------------------------------------------------------------
++* gmac_open
++*----------------------------------------------------------------------*/
++
++static int gmac_open (struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ int retval;
++ TOE_INFO_T *toe;
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ /* hook ISR */
++ retval = request_irq (dev->irq, toe_gmac_interrupt, SA_INTERRUPT, dev->name, dev);
++ if (retval)
++ return retval;
++
++ toe_init_gmac(dev);
++
++ if(!FLAG_SWITCH)
++ {
++ init_waitqueue_head (&tp->thr_wait);
++ init_completion(&tp->thr_exited);
++
++ tp->time_to_die = 0;
++ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
++ if (tp->thr_pid < 0)
++ {
++ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
++ }
++ }
++
++ tp->operation = 1;
++
++ netif_start_queue (dev);
++
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_close
++*----------------------------------------------------------------------*/
++static int gmac_close(struct net_device *dev)
++{
++ TOE_INFO_T *toe;
++// GMAC_RXDESC_T *sw_desc_ptr,*desc_ptr;
++// unsigned int buf_ptr;
++ GMAC_INFO_T *tp = dev->priv;
++ unsigned int ret;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ tp->operation = 0;
++
++ netif_stop_queue(dev);
++ mdelay(20);
++
++ /* stop tx/rx packet */
++ toe_gmac_disable_tx_rx(dev);
++ mdelay(20);
++
++ /* stop the chip's Tx and Rx DMA processes */
++ toe_gmac_hw_stop(dev);
++
++ toe_gmac_disable_interrupt(tp->irq);
++
++ /* disable interrupts by clearing the interrupt mask */
++ synchronize_irq();
++ free_irq(dev->irq,dev);
++
++// DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma);
++// DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma);
++// DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma);
++// DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma);
++// DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma);
++// DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma);
++// DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma);
++// DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++// DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++// DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma);
++// DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma);
++
++ if(!FLAG_SWITCH)
++ {
++ if (tp->thr_pid >= 0)
++ {
++ tp->time_to_die = 1;
++ wmb();
++ ret = kill_proc (tp->thr_pid, SIGTERM, 1);
++ if (ret)
++ {
++ printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
++ return ret;
++ }
++// wait_for_completion (&tp->thr_exited);
++ }
++ }
++
++ return (0);
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_fill_free_q
++* allocate buffers for free queue.
++*----------------------------------------------------------------------*/
++static inline void toe_gmac_fill_free_q(void)
++{
++ struct sk_buff *skb;
++ volatile DMA_RWPTR_T fq_rwptr;
++ volatile GMAC_RXDESC_T *fq_desc;
++ unsigned long flags;
++ // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
++
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ spin_lock_irqsave(&gmac_fq_lock, flags);
++ //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++ // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++ TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
++ printk("%s::skb allocation fail!\n", __func__);
++ //while(1);
++ break;
++ }
++ REG32(skb->data) = (unsigned int)skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES);
++ // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
++ TOE_SW_FREEQ_DESC_NUM);
++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++ }
++ spin_unlock_irqrestore(&gmac_fq_lock, flags);
++}
++// EXPORT_SYMBOL(toe_gmac_fill_free_q);
++
++/*----------------------------------------------------------------------
++* toe_gmac_interrupt
++*----------------------------------------------------------------------*/
++static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
++{
++ struct net_device *dev = (struct net_device *)dev_instance;
++ TOE_INFO_T *toe;
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ unsigned int status0;
++ unsigned int status1;
++ unsigned int status2;
++ unsigned int status3;
++ unsigned int status4;
++
++// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++ toe = (TOE_INFO_T *)&toe_private_data;
++// handle NAPI
++#ifdef CONFIG_SL_NAPI
++if (storlink_ctl.pauseoff == 1)
++{
++/* disable GMAC interrupt */
++ //toe_gmac_disable_interrupt(tp->irq);
++
++// isPtr->interrupts++;
++ /* read Interrupt status */
++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ // prompt warning if status bit ON but not enabled
++#if 0
++ if (status0 & ~tp->intr0_enabled)
++ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
++ status0, tp->intr0_enabled);
++ if (status1 & ~tp->intr1_enabled)
++ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
++ status1, tp->intr1_enabled);
++ if (status2 & ~tp->intr2_enabled)
++ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
++ status2, tp->intr2_enabled);
++ if (status3 & ~tp->intr3_enabled)
++ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
++ status3, tp->intr3_enabled);
++ if (status4 & ~tp->intr4_enabled)
++ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
++ status4, tp->intr4_enabled);
++#endif
++
++ if (status0)
++ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
++ if (status1)
++ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
++ if (status2)
++ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
++ if (status3)
++ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
++ if (status4)
++ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++#if 0
++ /* handle freeq interrupt first */
++ if (status4 & tp->intr4_enabled) {
++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++ {
++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
++ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
++ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
++ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
++ printk("\nfreeq int\n");
++ toe_gmac_fill_free_q();
++ tp->sw_fq_empty_cnt++;
++
++ }
++ }
++#endif
++ // Interrupt Status 1
++ if (status1 & tp->intr1_enabled)
++ {
++ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
++ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
++ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
++ // Only count
++ // TOE, Classification, and default queues interrupts are handled by ISR
++ // because they should pass packets to upper layer
++ if (tp->port_id == 0)
++ {
++ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++ {
++ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
++ tp->hwtxq[3].eof_cnt++;
++ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
++ tp->hwtxq[2].eof_cnt++;
++ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
++ tp->hwtxq[1].eof_cnt++;
++ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
++ tp->hwtxq[0].eof_cnt++;
++ }
++ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++ {
++ if (likely(netif_rx_schedule_prep(dev)))
++ {
++ unsigned int data32;
++ // disable GMAC-0 rx interrupt
++ // class-Q & TOE-Q are implemented in future
++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //data32 &= ~DEFAULT_Q0_INT_BIT;
++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
++ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //tp->total_q_cnt_napi=0;
++ //rx_time = jiffies;
++ //rx_old_bytes = isPtr->rx_bytes;
++ __netif_rx_schedule(dev);
++ }
++ }
++ }
++ else if (tp->port_id == 1)
++ {
++ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++ {
++ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
++ tp->hwtxq[3].eof_cnt++;
++ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
++ tp->hwtxq[2].eof_cnt++;
++ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
++ tp->hwtxq[1].eof_cnt++;
++ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
++ tp->hwtxq[0].eof_cnt++;
++ }
++
++ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++ {
++ if (likely(netif_rx_schedule_prep(dev)))
++ {
++ unsigned int data32;
++ // disable GMAC-0 rx interrupt
++ // class-Q & TOE-Q are implemented in future
++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //data32 &= ~DEFAULT_Q1_INT_BIT;
++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
++ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //tp->total_q_cnt_napi=0;
++ //rx_time = jiffies;
++ //rx_old_bytes = isPtr->rx_bytes;
++ __netif_rx_schedule(dev);
++ }
++ }
++ }
++ }
++
++ // Interrupt Status 0
++ if (status0 & tp->intr0_enabled)
++ {
++ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
++ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
++
++ if (status0 & ERR_INTR_BITS)
++ {
++ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
++ {
++ tp->txDerr_cnt[0]++;
++ printk("GMAC0 TX AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
++ {
++ tp->txPerr_cnt[0]++;
++ printk("GMAC0 Tx Descriptor Protocol Error!\n");
++ }
++ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
++ {
++ tp->txDerr_cnt[1]++;
++ printk("GMAC1 Tx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
++ {
++ tp->txPerr_cnt[1]++;
++ printk("GMAC1 Tx Descriptor Protocol Error!\n");
++ }
++
++ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
++ {
++ tp->RxDerr_cnt[0]++;
++ printk("GMAC0 Rx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
++ {
++ tp->RxPerr_cnt[0]++;
++ printk("GMAC0 Rx Descriptor Protocol Error!\n");
++ }
++ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
++ {
++ tp->RxDerr_cnt[1]++;
++ printk("GMAC1 Rx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
++ {
++ tp->RxPerr_cnt[1]++;
++ printk("GMAC1 Rx Descriptor Protocol Error!\n");
++ }
++ }
++
++#ifndef GMAX_TX_INTR_DISABLED
++ if (tp->port_id == 1 && netif_running(dev) &&
++ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
++ ||
++ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
++ {
++ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
++ }
++
++ if (tp->port_id == 0 && netif_running(dev) &&
++ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
++ ||
++ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
++ {
++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++ }
++#endif
++ }
++ // Interrupt Status 4
++ if (status4 & tp->intr4_enabled)
++ {
++ #define G1_INTR4_BITS (0xff000000)
++ #define G0_INTR4_BITS (0x00ff0000)
++
++ if (tp->port_id == 0)
++ {
++ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
++ {
++ if (status4 & GMAC0_RESERVED_INT_BIT)
++ printk("GMAC0_RESERVED_INT_BIT is ON\n");
++ if (status4 & GMAC0_MIB_INT_BIT)
++ tp->mib_full_cnt++;
++ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
++ tp->rx_pause_on_cnt++;
++ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
++ tp->tx_pause_on_cnt++;
++ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
++ tp->rx_pause_off_cnt++;
++ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
++ tp->rx_pause_off_cnt++;
++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++ tp->rx_overrun_cnt++;
++ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
++ tp->status_changed_cnt++;
++ }
++ }
++ else if (tp->port_id == 1)
++ {
++ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
++ {
++ if (status4 & GMAC1_RESERVED_INT_BIT)
++ printk("GMAC1_RESERVED_INT_BIT is ON\n");
++ if (status4 & GMAC1_MIB_INT_BIT)
++ tp->mib_full_cnt++;
++ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
++ {
++ printk("Gmac pause on\n");
++ tp->rx_pause_on_cnt++;
++ }
++ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
++ {
++ printk("Gmac pause on\n");
++ tp->tx_pause_on_cnt++;
++ }
++ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
++ {
++ printk("Gmac pause off\n");
++ tp->rx_pause_off_cnt++;
++ }
++ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
++ {
++ printk("Gmac pause off\n");
++ tp->rx_pause_off_cnt++;
++ }
++ if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
++ {
++ //printk("Gmac Rx Overrun \n");
++ tp->rx_overrun_cnt++;
++ }
++ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
++ tp->status_changed_cnt++;
++ }
++ }
++ }
++
++ //toe_gmac_enable_interrupt(tp->irq);
++#ifdef IxscriptMate_1518
++ if (storlink_ctl.pauseoff == 1)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++#endif
++// enable_irq(gmac_irq[dev_index]);
++ //printk("gmac_interrupt complete!\n\n");
++// return IRQ_RETVAL(handled);
++ return IRQ_RETVAL(1);
++}
++else
++{
++#endif //endif NAPI
++
++
++ /* disable GMAC interrupt */
++ toe_gmac_disable_interrupt(tp->irq);
++
++// isPtr->interrupts++;
++ /* read Interrupt status */
++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ // prompt warning if status bit ON but not enabled
++#if 0
++ if (status0 & ~tp->intr0_enabled)
++ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
++ status0, tp->intr0_enabled);
++ if (status1 & ~tp->intr1_enabled)
++ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
++ status1, tp->intr1_enabled);
++ if (status2 & ~tp->intr2_enabled)
++ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
++ status2, tp->intr2_enabled);
++ if (status3 & ~tp->intr3_enabled)
++ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
++ status3, tp->intr3_enabled);
++ if (status4 & ~tp->intr4_enabled)
++ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
++ status4, tp->intr4_enabled);
++#endif
++#define INTERRUPT_SELECT 1
++ if (status0)
++ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
++ if (status1)
++ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
++ if (status2)
++ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
++ if (status3)
++ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
++ if (status4)
++ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
++ /* handle freeq interrupt first */
++ if (status4 & tp->intr4_enabled) {
++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++ {
++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
++ // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
++ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
++ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
++ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
++ printk("\nfreeq int\n");
++ toe_gmac_fill_free_q();
++ tp->sw_fq_empty_cnt++;
++
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++ SWFQ_EMPTY_INT_BIT);
++ }
++ }
++
++ // Interrupt Status 1
++ if (status1 & tp->intr1_enabled)
++ {
++ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
++ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
++ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
++ // Only count
++ // TOE, Classification, and default queues interrupts are handled by ISR
++ // because they should pass packets to upper layer
++ if (tp->port_id == 0)
++ {
++#ifndef INTERRUPT_SELECT
++ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++ {
++ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
++ tp->hwtxq[3].eof_cnt++;
++ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
++ tp->hwtxq[2].eof_cnt++;
++ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
++ tp->hwtxq[1].eof_cnt++;
++ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
++ tp->hwtxq[0].eof_cnt++;
++#endif //INTERRUPT_SELECT
++#ifndef INTERRUPT_SELECT
++ }
++#endif //INTERRUPT_SELECT
++ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++ {
++ tp->default_q_intr_cnt++;
++ toe_gmac_handle_default_rxq(dev, tp);
++ }
++#ifdef CONFIG_SL351x_RXTOE
++ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
++ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
++ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
++ toe_gmac_handle_toeq(dev, tp, status1);
++ //toe_gmac_handle_toeq(dev, toe, tp, status1);
++ }
++#endif
++ }
++ else if (tp->port_id == 1)
++ {
++#ifndef INTERRUPT_SELECT
++ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++ {
++ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
++ tp->hwtxq[3].eof_cnt++;
++ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
++ tp->hwtxq[2].eof_cnt++;
++ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
++ tp->hwtxq[1].eof_cnt++;
++ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
++ tp->hwtxq[0].eof_cnt++;
++#endif //INTERRUPT_SELECT
++#ifndef INTERRUPT_SELECT
++ }
++#endif //INTERRUPT_SELECT
++ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++ {
++ tp->default_q_intr_cnt++;
++ toe_gmac_handle_default_rxq(dev, tp);
++ }
++#ifdef CONFIG_SL351x_RXTOE
++ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
++ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
++ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
++ toe_gmac_handle_toeq(dev, tp, status1);
++ //toe_gmac_handle_toeq(dev, toe, tp, status1);
++ }
++#endif
++ }
++ }
++
++
++ // Interrupt Status 0
++ if (status0 & tp->intr0_enabled)
++ {
++
++ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
++ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
++ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
++ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
++#ifndef INTERRUPT_SELECT
++ if (status0 & ERR_INTR_BITS)
++ {
++ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
++ {
++ tp->txDerr_cnt[0]++;
++ printk("GMAC0 TX AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
++ {
++ tp->txPerr_cnt[0]++;
++ printk("GMAC0 Tx Descriptor Protocol Error!\n");
++ }
++ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
++ {
++ tp->txDerr_cnt[1]++;
++ printk("GMAC1 Tx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
++ {
++ tp->txPerr_cnt[1]++;
++ printk("GMAC1 Tx Descriptor Protocol Error!\n");
++ }
++
++ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
++ {
++ tp->RxDerr_cnt[0]++;
++ printk("GMAC0 Rx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
++ {
++ tp->RxPerr_cnt[0]++;
++ printk("GMAC0 Rx Descriptor Protocol Error!\n");
++ }
++ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
++ {
++ tp->RxDerr_cnt[1]++;
++ printk("GMAC1 Rx AHB Bus Error!\n");
++ }
++ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
++ {
++ tp->RxPerr_cnt[1]++;
++ printk("GMAC1 Rx Descriptor Protocol Error!\n");
++ }
++ }
++#endif //INTERRUPT_SELECT
++#ifndef GMAX_TX_INTR_DISABLED
++ if (tp->port_id == 1 && netif_running(dev) &&
++ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
++ ||
++ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
++ {
++ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
++ }
++
++ if (tp->port_id == 0 && netif_running(dev) &&
++ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
++ ||
++ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
++ {
++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++ }
++#endif
++ // clear enabled status bits
++ }
++ // Interrupt Status 4
++#ifndef INTERRUPT_SELECT
++ if (status4 & tp->intr4_enabled)
++ {
++ #define G1_INTR4_BITS (0xff000000)
++ #define G0_INTR4_BITS (0x00ff0000)
++
++ if (tp->port_id == 0)
++ {
++ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
++ {
++ if (status4 & GMAC0_RESERVED_INT_BIT)
++ printk("GMAC0_RESERVED_INT_BIT is ON\n");
++ if (status4 & GMAC0_MIB_INT_BIT)
++ tp->mib_full_cnt++;
++ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
++ tp->rx_pause_on_cnt++;
++ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
++ tp->tx_pause_on_cnt++;
++ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
++ tp->rx_pause_off_cnt++;
++ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
++ tp->rx_pause_off_cnt++;
++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++ tp->rx_overrun_cnt++;
++ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
++ tp->status_changed_cnt++;
++ }
++ }
++ else if (tp->port_id == 1)
++ {
++ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
++ {
++ if (status4 & GMAC1_RESERVED_INT_BIT)
++ printk("GMAC1_RESERVED_INT_BIT is ON\n");
++ if (status4 & GMAC1_MIB_INT_BIT)
++ tp->mib_full_cnt++;
++ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
++ {
++ //printk("Gmac pause on\n");
++ tp->rx_pause_on_cnt++;
++ }
++ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
++ {
++ //printk("Gmac pause on\n");
++ tp->tx_pause_on_cnt++;
++ }
++ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
++ {
++ //printk("Gmac pause off\n");
++ tp->rx_pause_off_cnt++;
++ }
++ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
++ {
++ //printk("Gmac pause off\n");
++ tp->rx_pause_off_cnt++;
++ }
++ if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
++ {
++ //printk("Gmac Rx Overrun \n");
++ tp->rx_overrun_cnt++;
++ }
++ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
++ tp->status_changed_cnt++;
++ }
++ }
++#if 0
++ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
++ {
++ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++// mac_stop_rxdma(tp->sc);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
++ tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
++ SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
++ toe_gmac_fill_free_q();
++ tp->sw_fq_empty_cnt++;
++
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++ SWFQ_EMPTY_INT_BIT);
++//#if 0
++/* if (netif_running(dev))
++ toe_gmac_handle_default_rxq(dev, tp);
++ printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */
++//#endif
++ }
++#endif
++ }
++#endif //INTERRUPT_SELECT
++ toe_gmac_enable_interrupt(tp->irq);
++//enable gmac rx function when do RFC 2544
++#ifdef IxscriptMate_1518
++ if (storlink_ctl.pauseoff == 1)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++#endif
++ //printk("gmac_interrupt complete!\n\n");
++// return IRQ_RETVAL(handled);
++ return IRQ_RETVAL(1);
++#ifdef CONFIG_SL_NAPI
++}
++#endif
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_handle_default_rxq
++* (1) Get rx Buffer for default Rx queue
++* (2) notify or call upper-routine to handle it
++* (3) get a new buffer and insert it into SW free queue
++* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing
++*----------------------------------------------------------------------*/
++//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
++static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
++{
++ TOE_INFO_T *toe;
++ GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *skb;
++ DMA_RWPTR_T rwptr;
++ unsigned int pkt_size;
++ int max_cnt;
++ unsigned int desc_count;
++ unsigned int good_frame, chksum_status, rx_status;
++ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++
++//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
++#ifdef IxscriptMate_1518
++ if (storlink_ctl.pauseoff == 1)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++#endif
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++#if 0
++ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
++ {
++ mac_stop_txdma((struct net_device *)tp->dev);
++ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
++ rwptr.bits32, tp->rx_rwptr.bits.rptr);
++ while(1);
++ }
++#endif
++ toe = (TOE_INFO_T *)&toe_private_data;
++ max_cnt = DEFAULT_RXQ_MAX_CNT;
++ while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
++// while (rwptr.bits.rptr != rwptr.bits.wptr)
++ {
++//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
++#ifdef IxscriptMate_1518
++ if (storlink_ctl.pauseoff == 1)
++ {
++ if (pkt_size != 1514)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++ }
++#endif
++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
++ tp->default_q_cnt++;
++ tp->rx_curr_desc = (unsigned int)curr_desc;
++ rx_status = curr_desc->word0.bits.status;
++ chksum_status = curr_desc->word0.bits.chksum_status;
++ tp->rx_status_cnt[rx_status]++;
++ tp->rx_chksum_cnt[chksum_status]++;
++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
++ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
++ good_frame=1;
++ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
++ || (pkt_size < 60)
++ || (chksum_status & 0x4)
++ || rx_status)
++ {
++ good_frame = 0;
++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
++ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
++ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
++ if (rx_status)
++ {
++ if (rx_status == 4 || rx_status == 7)
++ isPtr->rx_crc_errors++;
++// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
++ }
++#ifdef SL351x_GMAC_WORKAROUND
++ else if (pkt_size < 60)
++ {
++ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
++ tp->short_frames_cnt++;
++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++ }
++#endif
++// if (chksum_status)
++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ dev_kfree_skb_irq(skb);
++ }
++ if (good_frame)
++ {
++ if (curr_desc->word0.bits.drop)
++ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
++// if (chksum_status)
++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++
++ /* get frame information from the first descriptor of the frame */
++#ifdef SL351x_GMAC_WORKAROUND
++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++ tp->short_frames_cnt = 0;
++#endif
++ isPtr->rx_packets++;
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
++ if (!skb)
++ {
++ printk("Fatal Error!!skb==NULL\n");
++ goto next_rx;
++ }
++ tp->curr_rx_skb = skb;
++ // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++
++ // curr_desc->word2.buf_adr = 0;
++
++ skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */
++ skb_put(skb, pkt_size);
++ skb->dev = dev;
++ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
++ {
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++ {
++ struct iphdr *ip_hdr;
++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++#endif
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++#if 0
++#ifdef CONFIG_SL351x_RXTOE
++ if (storlink_ctl.rx_max_pktsize) {
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ int ip_hdrlen;
++
++ ip_hdr = (struct iphdr*)&(skb->data[0]);
++ if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
++ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
++ ip_hdrlen = ip_hdr->ihl << 2;
++ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++ if (tcp_hdr->syn) {
++ struct toe_conn* connection = init_toeq(ip_hdr->version,
++ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
++ TCP_SKB_CB(skb)->connection = connection;
++ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
++ // printk("%s::skb data %x, conn %x, mode %x\n",
++ // __func__, skb->data, connection, connection->mode);
++ }
++ }
++ }
++#endif
++#endif
++ }
++ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
++ {
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++ {
++ struct iphdr *ip_hdr;
++ //struct tcphdr *tcp_hdr;
++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++ //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
++ if (ip_hdr->protocol == IPPROTO_UDP)
++ {
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++ else if (ip_hdr->protocol == IPPROTO_GRE)
++ {
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++ }
++#endif
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++ }
++ else
++ {
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++ }
++
++ netif_rx(skb); /* socket rx */
++ dev->last_rx = jiffies;
++
++ isPtr->rx_bytes += pkt_size;
++
++ }
++
++next_rx:
++ // advance one for Rx default Q 0/1
++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++ tp->rx_rwptr.bits32 = rwptr.bits32;
++
++ toe_gmac_fill_free_q();
++ }
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_phy_vendor
++*----------------------------------------------------------------------*/
++static unsigned int gmac_get_phy_vendor(int phy_addr)
++{
++ unsigned int reg_val;
++ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
++ return reg_val;
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_phy_status
++*----------------------------------------------------------------------*/
++void gmac_set_phy_status(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_STATUS_T status;
++ unsigned int reg_val, ability,wan_port_id;
++ unsigned int i = 0;
++
++#ifdef VITESSE_G5SWITCH
++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
++#if 0
++ rcv_mask = SPI_read(2,0,0x10); // Receive mask
++ rcv_mask |= 0x4F;
++ for(i=0;i<4;i++){
++ reg_val = BIT(26)|(i<<21)|(10<<16);
++ SPI_write(3,0,1,reg_val);
++ msleep(10);
++ reg_val = SPI_read(3,0,2);
++ if(reg_val & 0x0c00){
++ printk("Port%d:Giga mode\n",i);
++ SPI_write(1,i,0x00,0x300701B1);
++ SPI_write(1,i,0x00,0x10070181);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_1000;
++ }
++ else{
++ reg_val = BIT(26)|(i<<21)|(5<<16);
++ SPI_write(3,0,1,reg_val);
++ msleep(10);
++ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
++ if ((ability & 0x0C)) /* 100M full duplex */
++ {
++ SPI_write(1,i,0x00,0x30050472);
++ SPI_write(1,i,0x00,0x10050442);
++ printk("Port%d:100M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_100;
++ }
++ else if((ability & 0x03)) /* 10M full duplex */
++ {
++ SPI_write(1,i,0x00,0x30050473);
++ SPI_write(1,i,0x00,0x10050443);
++ printk("Port%d:10M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ }
++ else{
++ SPI_write(1,i,0x00,BIT(16)); // disable RX
++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
++ msleep(1);
++
++ SPI_write(1,i,0x00,0x20000030); // PORT_RST
++ switch_pre_link[i]=LINK_DOWN;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ rcv_mask &= ~BIT(i);
++ SPI_write(2,0,0x10,rcv_mask); // Disable Receive
++ }
++ }
++ }
++#endif
++ gmac_get_switch_status(dev);
++ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
++// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
++ return ;
++ }
++#endif
++
++ reg_val = gmac_get_phy_vendor(tp->phy_addr);
++ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
++
++ switch (tp->phy_mode)
++ {
++ case GMAC_PHY_GMII:
++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++ #ifdef CONFIG_SL3516_ASIC
++ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
++ #else
++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
++ #endif
++ break;
++ case GMAC_PHY_RGMII_100:
++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
++ break;
++ case GMAC_PHY_RGMII_1000:
++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++ #ifdef CONFIG_SL3516_ASIC
++ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
++ #else
++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
++ #endif
++ break;
++ case GMAC_PHY_MII:
++ default:
++ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
++ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
++ break;
++ }
++
++ mii_write(tp->phy_addr,0x18,0x0041); // Phy active led
++ if (tp->auto_nego_cfg)
++ {
++ reg_val = 0x1200 | (1 << 15);
++ mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */
++ mdelay(500);
++ reg_val &= ~(1 << 15);
++ mii_write(tp->phy_addr, 0x00, reg_val);
++ }
++ else
++ {
++ reg_val = 0;
++ reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0;
++ reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0;
++ reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0;
++ mii_write(tp->phy_addr, 0x00, reg_val);
++ mdelay(100);
++
++ reg_val |= (1 << 15); // Reset PHY;
++ mii_write(tp->phy_addr, 0x00, reg_val);
++ }
++
++ status.bits32 = 0;
++ /* set PHY operation mode */
++ status.bits.mii_rmii = tp->phy_mode;
++ status.bits.reserved = 1;
++ mdelay(100);
++ while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04)
++ {
++ msleep(100);
++ i++;
++ if (i > 30)
++ break;
++ }
++ if (i>30)
++ {
++ tp->pre_phy_status = LINK_DOWN;
++ status.bits.link = LINK_DOWN;
++ // clear_bit(__LINK_STATE_START, &dev->state);
++ printk("Link Down (0x%04x) ", reg_val);
++ if(Giga_switch == 1)
++ {
++ wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ wan_port_id] = 0;
++#endif
++ }
++ else
++ {
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ tp->port_id] = 0;
++#endif
++ }
++ }
++ else
++ {
++ tp->pre_phy_status = LINK_UP;
++ status.bits.link = LINK_UP;
++ // set_bit(__LINK_STATE_START, &dev->state);
++ printk("Link Up (0x%04x) ",reg_val);
++ if(Giga_switch == 1)
++ {
++ wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ wan_port_id] = 1;
++#endif
++ }
++ else
++ {
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ tp->port_id] = 1;
++#endif
++ }
++ }
++ // value = mii_read(PHY_ADDR,0x05);
++
++ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
++
++ //#ifdef CONFIG_SL3516_ASIC
++ reg_val = mii_read(tp->phy_addr,10);
++ printk("MII REG 10 = 0x%x\n",reg_val);
++
++ if ((reg_val & 0x0800) == 0x0800)
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 2;
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++
++ printk(" 1000M/Full \n");
++ }
++ else if ((reg_val & 0x0400) == 0x0400)
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 2;
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++
++ printk(" 1000M/Half \n");
++ }
++ //#endif
++ else
++ {
++ #ifdef CONFIG_SL3516_ASIC
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_100;
++ #endif
++ printk("MII REG 5 (bit 5:15) = 0x%x\n", ability);
++ if ((ability & 0x08)==0x08) /* 100M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 1;
++ printk(" 100M/Full\n");
++
++ }
++ else if ((ability & 0x04)==0x04) /* 100M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 1;
++ printk(" 100M/Half\n");
++
++ }
++ else if ((ability & 0x02)==0x02) /* 10M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 0;
++ printk(" 10M/Full\n");
++
++ }
++ else if ((ability & 0x01)==0x01) /* 10M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 0;
++ printk(" 10M/Half\n");
++
++ }
++ }
++ if ((ability & 0x20)==0x20)
++ {
++ tp->flow_control_enable = 1;
++ printk("Flow Control Enable.\n");
++ }
++ else
++ {
++ tp->flow_control_enable = 0;
++ printk("Flow Control Disable.\n");
++ }
++ tp->full_duplex_status = status.bits.duplex;
++ tp->speed_status = status.bits.speed;
++ if (!tp->auto_nego_cfg)
++ {
++ status.bits.duplex = tp->full_duplex_cfg;
++ status.bits.speed = tp->speed_cfg;
++ }
++ toe_gmac_disable_tx_rx(dev);
++ mdelay(10);
++ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
++ toe_gmac_enable_tx_rx(dev);
++}
++
++/*----------------------------------------------------------------------
++* gmac_phy_thread
++*----------------------------------------------------------------------*/
++static int gmac_phy_thread (void *data)
++{
++ struct net_device *dev = data;
++ GMAC_INFO_T *tp = dev->priv;
++ unsigned long timeout;
++
++ daemonize("%s", dev->name);
++ allow_signal(SIGTERM);
++// reparent_to_init();
++// spin_lock_irq(&current->sigmask_lock);
++// sigemptyset(&current->blocked);
++// recalc_sigpending(current);
++// spin_unlock_irq(&current->sigmask_lock);
++// strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
++// current->comm[sizeof(current->comm) - 1] = '\0';
++
++ while (1)
++ {
++ timeout = next_tick;
++ do
++ {
++ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
++ } while (!signal_pending (current) && (timeout > 0));
++
++ if (signal_pending (current))
++ {
++// spin_lock_irq(&current->sigmask_lock);
++ flush_signals(current);
++// spin_unlock_irq(&current->sigmask_lock);
++ }
++
++ if (tp->time_to_die)
++ break;
++
++ // printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id);
++ rtnl_lock ();
++ if (tp->auto_nego_cfg){
++#ifdef VITESSE_G5SWITCH
++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1))
++ gmac_get_switch_status(dev);
++ else
++#endif
++ gmac_get_phy_status(dev); //temp remove
++ }
++ rtnl_unlock ();
++ }
++ complete_and_exit (&tp->thr_exited, 0);
++}
++
++/*----------------------------------------------------------------------
++* gmac_get_switch_status
++*----------------------------------------------------------------------*/
++#ifdef VITESSE_G5SWITCH
++void gmac_get_switch_status(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++ unsigned int switch_port_id;
++ int get_link=0;
++
++ get_link = Get_Set_port_status();
++ if(get_link){ // link
++ if(ever_dwon){
++ ever_dwon = 0;
++ toe_gmac_enable_tx_rx(dev);
++ netif_wake_queue(dev);
++ set_bit(__LINK_STATE_START, &dev->state);
++ }
++ }
++ else{ // all down
++ //printk("All link down\n");
++ ever_dwon=1;
++ netif_stop_queue(dev);
++ toe_gmac_disable_tx_rx(dev);
++ clear_bit(__LINK_STATE_START, &dev->state);
++ }
++
++ if ( tp->port_id == 1 )
++ switch_port_id = 0;
++#ifdef CONFIG_SL351x_SYSCTL
++ if (get_link)
++ {
++ storlink_ctl.link[switch_port_id] = 1;
++ }
++ else
++ {
++ storlink_ctl.link[switch_port_id] = 0;
++ }
++ if (storlink_ctl.pauseoff == 1)
++ {
++ if (tp->flow_control_enable == 1)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 0; /* disable tx flow control */
++ config0.bits.rx_fc_en = 0; /* disable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++ printk("Disable SWITCH Flow Control...\n");
++ }
++ tp->flow_control_enable = 0;
++ }
++ else
++#endif
++ {
++ if (tp->flow_control_enable == 0)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 1; /* enable tx flow control */
++ config0.bits.rx_fc_en = 1; /* enable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++ printk("Enable SWITCH Flow Control...\n");
++ }
++ tp->flow_control_enable = 1;
++ }
++ return ;
++
++}
++#endif
++
++/*----------------------------------------------------------------------
++* gmac_get_phy_status
++*----------------------------------------------------------------------*/
++void gmac_get_phy_status(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_CONFIG0_T config0,config0_mask;
++ GMAC_STATUS_T status, old_status;
++ unsigned int reg_val,ability,wan_port_id;
++
++ old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS);
++
++
++ /* read PHY status register */
++ reg_val = mii_read(tp->phy_addr,0x01);
++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
++ {
++ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
++ /* read PHY Auto-Negotiation Link Partner Ability Register */
++ #ifdef CONFIG_SL3516_ASIC
++ reg_val = mii_read(tp->phy_addr,10);
++ if ((reg_val & 0x0800) == 0x0800)
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 2;
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++ }
++ else if ((reg_val & 0x0400) == 0x0400)
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 2;
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
++ }
++ else
++ #endif
++ {
++ #ifdef CONFIG_SL3516_ASIC
++ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
++ status.bits.mii_rmii = GMAC_PHY_RGMII_100;
++ #endif
++ if ((ability & 0x08)==0x08) /* 100M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 1;
++ }
++ else if ((ability & 0x04)==0x04) /* 100M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 1;
++ }
++ else if ((ability & 0x02)==0x02) /* 10M full duplex */
++ {
++ status.bits.duplex = 1;
++ status.bits.speed = 0;
++ }
++ else if ((ability & 0x01)==0x01) /* 10M half duplex */
++ {
++ status.bits.duplex = 0;
++ status.bits.speed = 0;
++ }
++ }
++ status.bits.link = LINK_UP; /* link up */
++ if(Giga_switch==1)
++ {
++ wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ wan_port_id] = 1;
++ }
++ else
++ {
++ storlink_ctl.link[ tp->port_id] = 1;
++#endif
++ }
++ if ((ability & 0x20)==0x20)
++ {
++ if (tp->flow_control_enable == 0)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 1; /* enable tx flow control */
++ config0.bits.rx_fc_en = 1; /* enable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++ printk("GMAC-%d Flow Control Enable.\n", tp->port_id);
++ }
++ tp->flow_control_enable = 1;
++ }
++ else
++ {
++ if (tp->flow_control_enable == 1)
++ {
++ config0.bits32 = 0;
++ config0_mask.bits32 = 0;
++ config0.bits.tx_fc_en = 0; /* disable tx flow control */
++ config0.bits.rx_fc_en = 0; /* disable rx flow control */
++ config0_mask.bits.tx_fc_en = 1;
++ config0_mask.bits.rx_fc_en = 1;
++ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
++ printk("GMAC-%d Flow Control Disable.\n", tp->port_id);
++ }
++ tp->flow_control_enable = 0;
++ }
++
++ if (tp->pre_phy_status == LINK_DOWN)
++ {
++ printk("GMAC-%d LINK_UP......\n",tp->port_id);
++ tp->pre_phy_status = LINK_UP;
++ }
++ }
++ else
++ {
++ status.bits.link = LINK_DOWN; /* link down */
++ if(Giga_switch == 1)
++ {
++ wan_port_id = 1;
++#ifdef CONFIG_SL351x_SYSCTL
++ storlink_ctl.link[ wan_port_id] = 0;
++ }
++ else
++ {
++ storlink_ctl.link[ tp->port_id] = 0;
++#endif
++ }
++ if (tp->pre_phy_status == LINK_UP)
++ {
++ printk("GMAC-%d LINK_Down......\n",tp->port_id);
++ tp->pre_phy_status = LINK_DOWN;
++ }
++ }
++
++ tp->full_duplex_status = status.bits.duplex;
++ tp->speed_status = status.bits.speed;
++ if (!tp->auto_nego_cfg)
++ {
++ status.bits.duplex = tp->full_duplex_cfg;
++ status.bits.speed = tp->speed_cfg;
++ }
++
++ if (old_status.bits32 != status.bits32)
++ {
++ netif_stop_queue(dev);
++ toe_gmac_disable_tx_rx(dev);
++ clear_bit(__LINK_STATE_START, &dev->state);
++ printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32);
++ mdelay(10); // let GMAC consume packet
++ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
++ if (status.bits.link == LINK_UP)
++ {
++ toe_gmac_enable_tx_rx(dev);
++ netif_wake_queue(dev);
++ set_bit(__LINK_STATE_START, &dev->state);
++ }
++ }
++}
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
++
++/* define GPIO pin for MDC/MDIO */
++#ifdef CONFIG_SL3516_ASIC
++#define H_MDC_PIN 22
++#define H_MDIO_PIN 21
++#define G_MDC_PIN 22
++#define G_MDIO_PIN 21
++#else
++#define H_MDC_PIN 3
++#define H_MDIO_PIN 2
++#define G_MDC_PIN 0
++#define G_MDIO_PIN 1
++#endif
++
++//#define GPIO_MDC 0x80000000
++//#define GPIO_MDIO 0x00400000
++
++static unsigned int GPIO_MDC = 0;
++static unsigned int GPIO_MDIO = 0;
++static unsigned int GPIO_MDC_PIN = 0;
++static unsigned int GPIO_MDIO_PIN = 0;
++
++// For PHY test definition!!
++#define LPC_EECK 0x02
++#define LPC_EDIO 0x04
++#define LPC_GPIO_SET 3
++#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
++#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
++
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0c,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++};
++/***********************/
++/* MDC : GPIO[31] */
++/* MDIO: GPIO[22] */
++/***********************/
++
++/***************************************************
++* All the commands should have the frame structure:
++*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE>
++****************************************************/
++
++/*****************************************************************
++* Inject a bit to NWay register through CSR9_MDC,MDIO
++*******************************************************************/
++void mii_serial_write(char bit_MDO) // write data into mii PHY
++{
++#ifdef CONFIG_SL2312_LPC_IT8712
++ unsigned char iomode,status;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ if(bit_MDO)
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= LPC_EDIO ; //EDIO high
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++ else
++ {
++ status = inb_gpio( LPC_GPIO_SET);
++ status &= ~(LPC_EDIO) ; //EDIO low
++ outb_gpio(LPC_GPIO_SET, status);
++ }
++
++ status |= LPC_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(LPC_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++#else
++ unsigned int addr;
++ unsigned int value;
++
++ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
++ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
++ writel(value,addr);
++ if(bit_MDO)
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDIO,addr); /* set MDIO to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDIO,addr); /* set MDIO to 0 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++ }
++
++#endif
++}
++
++/**********************************************************************
++* read a bit from NWay register through CSR9_MDC,MDIO
++***********************************************************************/
++unsigned int mii_serial_read(void) // read data from mii PHY
++{
++#ifdef CONFIG_SL2312_LPC_IT8712
++ unsigned char iomode,status;
++ unsigned int value ;
++
++ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
++ iomode &= ~(LPC_EDIO) ; // Set EDIO input
++ iomode |= (LPC_EECK) ; // Set EECK,EECS output
++ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
++
++ status = inb_gpio( LPC_GPIO_SET);
++ status |= LPC_EECK ; //EECK high
++ outb_gpio(LPC_GPIO_SET, status);
++
++ status &= ~(LPC_EECK) ; //EECK low
++ outb_gpio(LPC_GPIO_SET, status);
++
++ value = inb_gpio( LPC_GPIO_SET);
++
++ value = value>>2 ;
++ value &= 0x01;
++
++ return value ;
++
++#else
++ unsigned int *addr;
++ unsigned int value;
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
++ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */
++ writel(value,addr);
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
++ writel(GPIO_MDC,addr); /* set MDC to 1 */
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
++ writel(GPIO_MDC,addr); /* set MDC to 0 */
++
++ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
++ value = readl(addr);
++ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN;
++ return(value);
++
++#endif
++}
++
++/***************************************
++* preamble + ST
++***************************************/
++void mii_pre_st(void)
++{
++ unsigned char i;
++
++ for(i=0;i<32;i++) // PREAMBLE
++ mii_serial_write(1);
++ mii_serial_write(0); // ST
++ mii_serial_write(1);
++}
++
++
++/******************************************
++* Read MII register
++* phyad -> physical address
++* regad -> register address
++***************************************** */
++unsigned int mii_read(unsigned char phyad,unsigned char regad)
++{
++ unsigned int i,value;
++ unsigned int bit;
++
++ if (phyad == GPHY_ADDR)
++ {
++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++ }
++ else
++ {
++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++ }
++ GPIO_MDC = (1<<GPIO_MDC_PIN);
++ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
++
++ mii_pre_st(); // PRE+ST
++ mii_serial_write(1); // OP
++ mii_serial_write(0);
++
++ for (i=0;i<5;i++) { // PHYAD
++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ for (i=0;i<5;i++) { // REGAD
++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ mii_serial_read(); // TA_Z
++// if((bit=mii_serial_read()) !=0 ) // TA_0
++// {
++// return(0);
++// }
++ value=0;
++ for (i=0;i<16;i++) { // READ DATA
++ bit=mii_serial_read();
++ value += (bit<<(15-i)) ;
++ }
++
++ mii_serial_write(0); // dumy clock
++ mii_serial_write(0); // dumy clock
++
++ //printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
++ return(value);
++}
++
++/******************************************
++* Write MII register
++* phyad -> physical address
++* regad -> register address
++* value -> value to be write
++***************************************** */
++void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
++{
++ unsigned int i;
++ char bit;
++
++ printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
++ if (phyad == GPHY_ADDR)
++ {
++ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
++ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
++ }
++ else
++ {
++ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
++ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
++ }
++ GPIO_MDC = (1<<GPIO_MDC_PIN);
++ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
++
++ mii_pre_st(); // PRE+ST
++ mii_serial_write(0); // OP
++ mii_serial_write(1);
++ for (i=0;i<5;i++) { // PHYAD
++ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++
++ for (i=0;i<5;i++) { // REGAD
++ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
++ mii_serial_write(bit);
++ }
++ mii_serial_write(1); // TA_1
++ mii_serial_write(0); // TA_0
++
++ for (i=0;i<16;i++) { // OUT DATA
++ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
++ mii_serial_write(bit);
++ }
++ mii_serial_write(0); // dumy clock
++ mii_serial_write(0); // dumy clock
++}
++
++/*----------------------------------------------------------------------
++* gmac_set_rx_mode
++*----------------------------------------------------------------------*/
++static void gmac_set_rx_mode(struct net_device *dev)
++{
++ GMAC_RX_FLTR_T filter;
++ unsigned int mc_filter[2]; /* Multicast hash filter */
++ int bit_nr;
++ unsigned int i;
++ GMAC_INFO_T *tp = dev->priv;
++
++// printk("%s : dev->flags = %x \n",__func__,dev->flags);
++// dev->flags |= IFF_ALLMULTI; /* temp */
++ filter.bits32 = 0;
++ filter.bits.error = 0;
++ if (dev->flags & IFF_PROMISC)
++ {
++ filter.bits.error = 1;
++ filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0xffffffff;
++ }
++ else if (dev->flags & IFF_ALLMULTI)
++ {
++// filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0xffffffff;
++ }
++ else
++ {
++ struct dev_mc_list *mclist;
++
++// filter.bits.promiscuous = 1;
++ filter.bits.broadcast = 1;
++ filter.bits.multicast = 1;
++ filter.bits.unicast = 1;
++ mc_filter[1] = mc_filter[0] = 0;
++ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
++ {
++ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
++ if (bit_nr < 32)
++ {
++ mc_filter[0] = mc_filter[0] | (1<<bit_nr);
++ }
++ else
++ {
++ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32));
++ }
++ }
++ }
++ gmac_write_reg(tp->base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff); //chech base address!!!
++ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
++ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
++ return;
++}
++
++#ifdef CONFIG_SL_NAPI
++/*----------------------------------------------------------------------
++* gmac_rx_poll
++*----------------------------------------------------------------------*/
++static int gmac_rx_poll(struct net_device *dev, int *budget)
++{
++ TOE_INFO_T *toe;
++ GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *skb;
++ DMA_RWPTR_T rwptr;
++ unsigned int pkt_size;
++ unsigned int desc_count;
++ unsigned int good_frame, chksum_status, rx_status;
++ int rx_pkts_num = 0;
++ int quota = min(dev->quota, *budget);
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ unsigned int status4;
++ volatile DMA_RWPTR_T fq_rwptr;
++ int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
++ //unsigned long rx_old_bytes;
++ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
++ //unsigned long long rx_time;
++
++
++
++#if 1
++ if (do_again)
++ {
++ toe_gmac_fill_free_q();
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
++ if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
++ {
++ //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ do_again =0;
++ //netif_rx_complete(dev);
++ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++ }
++ else
++ return 1;
++ }
++#endif
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++#if 0
++ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
++ {
++ mac_stop_txdma((struct net_device *)tp->dev);
++ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
++ rwptr.bits32, tp->rx_rwptr.bits.rptr);
++ while(1);
++ }
++#endif
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
++ //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++
++ while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++ {
++
++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++ tp->default_q_cnt++;
++ tp->rx_curr_desc = (unsigned int)curr_desc;
++ rx_status = curr_desc->word0.bits.status;
++ chksum_status = curr_desc->word0.bits.chksum_status;
++ tp->rx_status_cnt[rx_status]++;
++ tp->rx_chksum_cnt[chksum_status]++;
++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
++ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
++ good_frame=1;
++ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
++ || (pkt_size < 60)
++ || (chksum_status & 0x4)
++ || rx_status )
++// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
++ {
++ good_frame = 0;
++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
++ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
++ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
++ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
++ if (rx_status)
++ {
++ if (rx_status == 4 || rx_status == 7)
++ isPtr->rx_crc_errors++;
++// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
++ }
++#ifdef SL351x_GMAC_WORKAROUND
++ else if (pkt_size < 60)
++ {
++ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
++ tp->short_frames_cnt++;
++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++ }
++#endif
++// if (chksum_status)
++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ dev_kfree_skb_irq(skb);
++ }
++ if (good_frame)
++ {
++ if (curr_desc->word0.bits.drop)
++ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
++// if (chksum_status)
++// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
++
++#ifdef SL351x_GMAC_WORKAROUND
++ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ GMAC_CONFIG0_T config0;
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ }
++ tp->short_frames_cnt = 0;
++#endif
++ /* get frame information from the first descriptor of the frame */
++ isPtr->rx_packets++;
++ //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ tp->curr_rx_skb = skb;
++ // curr_desc->word2.buf_adr = 0;
++
++ //skb_reserve (skb, SKB_RESERVE_BYTES);
++ skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */
++ //if ((skb->tail+pkt_size) > skb->end )
++ //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
++ skb_put(skb, pkt_size);
++
++
++ skb->dev = dev;
++ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
++ {
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++ {
++ struct iphdr *ip_hdr;
++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++#endif
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++#if 0
++#ifdef CONFIG_SL351x_RXTOE
++ if (storlink_ctl.rx_max_pktsize) {
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ int ip_hdrlen;
++
++ ip_hdr = (struct iphdr*)&(skb->data[0]);
++ if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
++ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
++ ip_hdrlen = ip_hdr->ihl << 2;
++ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++ if (tcp_hdr->syn) {
++ struct toe_conn* connection = init_toeq(ip_hdr->version,
++ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
++ TCP_SKB_CB(skb)->connection = connection;
++ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
++ // printk("%s::skb data %x, conn %x, mode %x\n",
++ // __func__, skb->data, connection, connection->mode);
++ }
++ }
++ }
++#endif
++#endif
++ }
++ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
++ {
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++#ifdef CONFIG_SL351x_NAT
++ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
++ {
++ struct iphdr *ip_hdr;
++ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
++ if (ip_hdr->protocol == IPPROTO_UDP)
++ {
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++ else if (ip_hdr->protocol == IPPROTO_GRE)
++ {
++ sl351x_nat_input(skb,
++ tp->port_id,
++ (void *)curr_desc->word3.bits.l3_offset,
++ (void *)curr_desc->word3.bits.l4_offset);
++ }
++ }
++#endif
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++ }
++ else
++ {
++ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
++ }
++ //netif_rx(skb); /* socket rx */
++ netif_receive_skb(skb); //For NAPI
++ dev->last_rx = jiffies;
++
++ isPtr->rx_bytes += pkt_size;
++ //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
++
++
++ }
++ // advance one for Rx default Q 0/1
++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++ tp->rx_rwptr.bits32 = rwptr.bits32;
++ rx_pkts_num++;
++ //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
++ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
++#if 0
++ if ((status4 & 0x1) == 0)
++ {
++ //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
++ if (tp->total_q_cnt_napi < 1024)
++ {
++ tp->total_q_cnt_napi++;
++ toe_gmac_fill_free_q(); //for iperf test disable
++ }
++ //else
++ //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
++
++ }
++#endif
++ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++ //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
++ //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++ }
++ // advance one for Rx default Q 0/1
++
++ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++ //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++ //tp->rx_rwptr.bits32 = rwptr.bits32;
++ //rwptr.bits.rptr = rwptr.bits.rptr;
++
++ dev->quota -= rx_pkts_num;
++ *budget -= rx_pkts_num;
++
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
++ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
++ //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++// if (rwptr.bits.rptr > rwptr.bits.wptr )
++// {
++ //toe_gmac_disable_rx(dev);
++ //wait_event_interruptible_timeout(freeq_wait,
++ //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
++ //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
++ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++// return 1;
++// }
++
++ if (rwptr.bits.rptr == rwptr.bits.wptr)
++ {
++ unsigned int data32;
++ //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++
++ /* Receive descriptor is empty now */
++#if 1
++ if (status4 & 0x1)
++ {
++ do_again =1;
++ //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
++ //toe_gmac_disable_interrupt(tp->irq);
++ tp->sw_fq_empty_cnt++;
++ //toe_gmac_disable_rx(dev);
++ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
++ //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
++ //{
++ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
++ //0x1);
++ //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
++ //if ((status4 & 0x1) == 0)
++ //break;
++ return 1;
++ //}
++
++ }
++#endif
++ //toe_gmac_fill_free_q();
++ netif_rx_complete(dev);
++ // enable GMAC-0 rx interrupt
++ // class-Q & TOE-Q are implemented in future
++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //if (tp->port_id == 0)
++ //data32 |= DEFAULT_Q0_INT_BIT;
++ //else
++ //data32 |= DEFAULT_Q1_INT_BIT;
++ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
++ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
++ return 0;
++ }
++ else
++ {
++ //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
++ return 1;
++ }
++}
++#endif
++
++/*----------------------------------------------------------------------
++* gmac_tx_timeout
++*----------------------------------------------------------------------*/
++void gmac_tx_timeout(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++
++#ifdef CONFIG_SL351x_SYSCTL
++ if (tp->operation && storlink_ctl.link[tp->port_id])
++#else
++ if (tp->operation)
++#endif
++ {
++ netif_wake_queue(dev);
++ }
++}
++
++
++
++/*----------------------------------------------------------------------
++* mac_set_rule_reg
++*----------------------------------------------------------------------*/
++int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2)
++{
++ int total_key_dwords;
++
++ total_key_dwords = 1;
++
++ if (reg0 & MR_L2_BIT)
++ {
++ if (reg0 & MR_DA_BIT) total_key_dwords += 2;
++ if (reg0 & MR_SA_BIT) total_key_dwords += 2;
++ if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--;
++ if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++;
++ }
++ if (reg0 & MR_L3_BIT)
++ {
++ if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS))
++ total_key_dwords++;
++ if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++;
++ if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4
++ {
++ if (reg1 & 0xff000000) total_key_dwords += 1;
++ if (reg1 & 0x00ff0000) total_key_dwords += 1;
++ }
++ else
++ {
++ if (reg1 & 0xff000000) total_key_dwords += 4;
++ if (reg1 & 0x00ff0000) total_key_dwords += 4;
++ }
++ }
++ if (reg0 & MR_L4_BIT)
++ {
++ if (reg1 & 0x0000f000) total_key_dwords += 1;
++ if (reg1 & 0x00000f00) total_key_dwords += 1;
++ if (reg1 & 0x000000f0) total_key_dwords += 1;
++ if (reg1 & 0x0000000f) total_key_dwords += 1;
++ if (reg2 & 0xf0000000) total_key_dwords += 1;
++ if (reg2 & 0x0f000000) total_key_dwords += 1;
++ }
++ if (reg0 & MR_L7_BIT)
++ {
++ if (reg2 & 0x00f00000) total_key_dwords += 1;
++ if (reg2 & 0x000f0000) total_key_dwords += 1;
++ if (reg2 & 0x0000f000) total_key_dwords += 1;
++ if (reg2 & 0x00000f00) total_key_dwords += 1;
++ if (reg2 & 0x000000f0) total_key_dwords += 1;
++ if (reg2 & 0x0000000f) total_key_dwords += 1;
++ }
++
++ if (total_key_dwords > HASH_MAX_KEY_DWORD)
++ return -1;
++
++ if (total_key_dwords == 0 && enabled)
++ return -2;
++
++ mac_set_rule_enable_bit(mac, rule, 0);
++ if (enabled)
++ {
++ mac_set_MRxCRx(mac, rule, 0, reg0);
++ mac_set_MRxCRx(mac, rule, 1, reg1);
++ mac_set_MRxCRx(mac, rule, 2, reg2);
++ mac_set_rule_action(mac, rule, total_key_dwords);
++ mac_set_rule_enable_bit(mac, rule, enabled);
++ }
++ else
++ {
++ mac_set_rule_action(mac, rule, 0);
++ }
++ return total_key_dwords;
++}
++
++/*----------------------------------------------------------------------
++* mac_get_rule_enable_bit
++*----------------------------------------------------------------------*/
++int mac_get_rule_enable_bit(int mac, int rule)
++{
++ switch (rule)
++ {
++ case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1);
++ case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1);
++ case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1);
++ case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1);
++ default: return 0;
++ }
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_enable_bit
++*----------------------------------------------------------------------*/
++void mac_set_rule_enable_bit(int mac, int rule, int data)
++{
++ u32 reg;
++
++ if (data & ~1)
++ return;
++
++ switch (rule)
++ {
++ case 0:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15);
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
++ break;
++ case 1:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31);
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
++ break;
++ case 2:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15);
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
++ break;
++ case 3:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31);
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
++ }
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_action
++*----------------------------------------------------------------------*/
++int mac_set_rule_action(int mac, int rule, int data)
++{
++ u32 reg;
++
++ if (data > 32)
++ return -1;
++
++ if (data)
++ data = (data << 6) | (data + HASH_ACTION_DWORDS);
++ switch (rule)
++ {
++ case 0:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff));
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data);
++ break;
++ case 1:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16));
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16));
++ break;
++ case 2:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff));
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | data);
++ break;
++ case 3:
++ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16));
++ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16));
++ break;
++ default:
++ return -1;
++ }
++
++ return 0;
++}
++/*----------------------------------------------------------------------
++* mac_get_MRxCRx
++*----------------------------------------------------------------------*/
++int mac_get_MRxCRx(int mac, int rule, int ctrlreg)
++{
++ int reg;
++
++ switch (rule)
++ {
++ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
++ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
++ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
++ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
++ default: return 0;
++ }
++ return mac_read_dma_reg(mac, reg);
++}
++
++/*----------------------------------------------------------------------
++* mac_set_MRxCRx
++*----------------------------------------------------------------------*/
++void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data)
++{
++ int reg;
++
++ switch (rule)
++ {
++ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
++ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
++ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
++ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
++ default: return;
++ }
++ mac_write_dma_reg(mac, reg, data);
++}
++
++/*----------------------------------------------------------------------
++* mac_set_rule_priority
++*----------------------------------------------------------------------*/
++void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3)
++{
++ int i;
++ GMAC_MRxCR0_T reg[4];
++
++ for (i=0; i<4; i++)
++ reg[i].bits32 = mac_get_MRxCRx(mac, i, 0);
++
++ reg[0].bits.priority = p0;
++ reg[1].bits.priority = p1;
++ reg[2].bits.priority = p2;
++ reg[3].bits.priority = p3;
++
++ for (i=0; i<4; i++)
++ mac_set_MRxCRx(mac, i, 0, reg[i].bits32);
++}
++
++/*----------------------------------------------------------------------
++* gmac_netdev_ioctl
++*----------------------------------------------------------------------*/
++static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ int rc = 0;
++ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
++
++#ifdef br_if_ioctl
++ struct ethtool_cmd ecmd; //br_if.c will call this ioctl
++ GMAC_INFO_T *tp = dev->priv;
++#endif
++
++#ifdef CONFIG_SL351x_NAT
++ if (cmd == SIOCDEVPRIVATE)
++ return sl351x_nat_ioctl(dev, rq, cmd);
++#endif
++
++ switch (cmd) {
++ case SIOCETHTOOL:
++#ifdef br_if_ioctl //br_if.c will call this ioctl
++ if (!netif_running(dev))
++ {
++ printk("Before changing the H/W address,please down the device.\n");
++ return -EINVAL;
++ }
++ memset((void *) &ecmd, 0, sizeof (ecmd));
++ ecmd.supported =
++ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
++ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
++ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
++ ecmd.port = PORT_TP;
++ ecmd.transceiver = XCVR_EXTERNAL;
++ ecmd.phy_address = tp->phy_addr;
++ switch (tp->speed_status)
++ {
++ case GMAC_SPEED_10: ecmd.speed = SPEED_10; break;
++ case GMAC_SPEED_100: ecmd.speed = SPEED_100; break;
++ case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break;
++ default: ecmd.speed = SPEED_10; break;
++ }
++ ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF;
++ ecmd.advertising = ADVERTISED_TP;
++ ecmd.advertising |= ADVERTISED_Autoneg;
++ ecmd.autoneg = AUTONEG_ENABLE;
++ if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
++ return -EFAULT;
++#endif
++
++ break;
++
++ case SIOCSIFHWADDR:
++ if (!netif_running(dev))
++ {
++ printk("Before changing the H/W address,please down the device.\n");
++ return -EINVAL;
++ }
++ gmac_set_mac_address(dev,hwa);
++ break;
++
++ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
++ break;
++
++ case SIOCGMIIREG: /* Read the specified MII register. */
++ break;
++
++ case SIOCSMIIREG: /* Write the specified MII register */
++ break;
++
++ default:
++ rc = -EOPNOTSUPP;
++ break;
++ }
++
++ return rc;
++}
++
++#ifdef SL351x_GMAC_WORKAROUND
++
++#define GMAC_TX_STATE_OFFSET 0x60
++#define GMAC_RX_STATE_OFFSET 0x64
++#define GMAC_POLL_HANGED_NUM 200
++#define GMAC_RX_HANGED_STATE 0x4b2000
++#define GMAC_RX_HANGED_MASK 0xdff000
++#define GMAC_TX_HANGED_STATE 0x34012
++#define GMAC_TX_HANGED_MASK 0xfffff
++#define TOE_GLOBAL_REG_SIZE (0x78/sizeof(u32))
++#define TOE_DMA_REG_SIZE (0xd0/sizeof(u32))
++#define TOE_GMAC_REG_SIZE (0x30/sizeof(u32))
++#define GMAC0_RX_HANG_BIT (1 << 0)
++#define GMAC0_TX_HANG_BIT (1 << 1)
++#define GMAC1_RX_HANG_BIT (1 << 2)
++#define GMAC1_TX_HANG_BIT (1 << 3)
++
++int gmac_in_do_workaround;
++#if 0
++int debug_cnt, poll_max_cnt;
++#endif
++u32 gmac_workaround_cnt[4];
++u32 toe_global_reg[TOE_GLOBAL_REG_SIZE];
++u32 toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE];
++u32 toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE];
++u32 gmac_short_frame_workaround_cnt[2];
++
++static void sl351x_gmac_release_buffers(void);
++static void sl351x_gmac_release_swtx_q(void);
++static void sl351x_gmac_release_rx_q(void);
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_class_q(void);
++static void sl351x_gmac_release_toe_q(void);
++static void sl351x_gmac_release_intr_q(void);
++#endif
++static void sl351x_gmac_release_sw_free_q(void);
++static void sl351x_gmac_release_hw_free_q(void);
++#ifdef CONFIG_SL351x_NAT
++static int get_free_desc_cnt(unsigned long rwptr, int total);
++static void sl351x_gmac_release_hwtx_q(void);
++u32 sl351x_nat_workaround_cnt;
++#endif
++void sl351x_gmac_save_reg(void);
++void sl351x_gmac_restore_reg(void);
++
++
++/*----------------------------------------------------------------------
++* sl351x_poll_gmac_hanged_status
++* - Called by timer routine, period 10ms
++* - If (state != 0 && state == prev state && )
++*----------------------------------------------------------------------*/
++void sl351x_poll_gmac_hanged_status(u32 data)
++{
++ int i;
++ u32 state;
++ TOE_INFO_T *toe;
++ GMAC_INFO_T *tp;
++ u32 hanged_state;
++ // int old_operation[GMAC_NUM];
++#ifdef CONFIG_SL351x_NAT
++ u32 hw_free_cnt;
++#endif
++
++ if (gmac_in_do_workaround)
++ return;
++
++ gmac_in_do_workaround = 1;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ hanged_state = 0;
++
++#ifdef SL351x_TEST_WORKAROUND
++ if (toe->gmac[0].operation || toe->gmac[1].operation)
++ {
++ debug_cnt++;
++ if (debug_cnt == (30 * HZ))
++ {
++ debug_cnt = 0;
++ hanged_state = GMAC0_RX_HANG_BIT;
++ goto do_workaround;
++ }
++ }
++#endif
++ if (toe->gmac[0].operation)
++ hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT;
++
++#if (GMAC_NUM > 1)
++ if (toe->gmac[1].operation)
++ hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT;
++#endif
++
++ for (i=0; i<GMAC_POLL_HANGED_NUM; i++)
++ {
++ if (hanged_state & GMAC0_RX_HANG_BIT)
++ {
++ state = readl(TOE_GMAC0_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
++ if (state != GMAC_RX_HANGED_STATE)
++ hanged_state &= ~GMAC0_RX_HANG_BIT;
++ }
++ if (hanged_state & GMAC0_TX_HANG_BIT)
++ {
++ state = readl(TOE_GMAC0_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
++ if (state != GMAC_TX_HANGED_STATE)
++ hanged_state &= ~GMAC0_TX_HANG_BIT;
++ }
++#if (GMAC_NUM > 1)
++ if (hanged_state & GMAC1_RX_HANG_BIT)
++ {
++ state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
++ if (state != GMAC_RX_HANGED_STATE)
++ hanged_state &= ~GMAC1_RX_HANG_BIT;
++ }
++ if (hanged_state & GMAC1_TX_HANG_BIT)
++ {
++ state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
++ if (state != GMAC_TX_HANGED_STATE)
++ hanged_state &= ~GMAC1_TX_HANG_BIT;
++ }
++#endif
++ if (!hanged_state)
++ {
++#if 0
++ if (i < poll_max_cnt)
++ poll_max_cnt = i;
++#endif
++ if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ gmac_short_frame_workaround_cnt[0]++;
++ toe->gmac[0].short_frames_cnt = 0;
++ goto do_workaround;
++ }
++#if (GMAC_NUM > 1)
++ if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
++ {
++ gmac_short_frame_workaround_cnt[1]++;
++ toe->gmac[1].short_frames_cnt = 0;
++ goto do_workaround;
++ }
++#endif
++
++#ifdef CONFIG_SL351x_NAT
++ hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++ hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM);
++#ifdef NAT_WORKAROUND_BY_RESET_GMAC
++ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ))
++ {
++ sl351x_nat_workaround_cnt++;
++ goto do_workaround;
++ }
++#else
++ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2)))
++ {
++ sl351x_nat_workaround_cnt++;
++ sl351x_nat_workaround_handler();
++ }
++#endif
++#endif
++ gmac_in_do_workaround = 0;
++ add_timer(&gmac_workround_timer_obj);
++ return;
++ }
++ }
++
++do_workaround:
++
++ gmac_initialized = 0;
++ if (hanged_state)
++ {
++ if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++;
++ if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++;
++ if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++;
++ if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++;
++ }
++
++ for (i=0; i<GMAC_NUM; i++)
++ {
++ tp=(GMAC_INFO_T *)&toe->gmac[i];
++ // old_operation[i] = tp->operation;
++ if (tp->operation)
++ {
++ netif_stop_queue(tp->dev);
++ clear_bit(__LINK_STATE_START, &tp->dev->state);
++ toe_gmac_disable_interrupt(tp->irq);
++ toe_gmac_disable_tx_rx(tp->dev);
++ toe_gmac_hw_stop(tp->dev);
++ }
++ }
++
++ // clear all status bits
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++#if 0
++ if ((hanged_state & GMAC0_RX_HANG_BIT) &&
++ (readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0))
++ {
++ struct sk_buff *skb;
++ unsigned int buf;
++ buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3;
++#ifdef CONFIG_SL351x_NAT
++ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
++#endif
++ {
++ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
++ printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb);
++ dev_kfree_skb(skb);
++ }
++ }
++ if ((hanged_state & GMAC1_RX_HANG_BIT) &&
++ (readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0))
++ {
++ struct sk_buff *skb;
++ unsigned int buf;
++ buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3;
++#ifdef CONFIG_SL351x_NAT
++ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
++#endif
++ {
++ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
++ printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb);
++ dev_kfree_skb(skb);
++ }
++ }
++#endif
++
++ sl351x_gmac_release_buffers();
++ sl351x_gmac_save_reg();
++ toe_gmac_sw_reset();
++ sl351x_gmac_restore_reg();
++
++ if (toe->gmac[0].default_qhdr->word1.bits32)
++ {
++ // printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1);
++ sl351x_gmac_release_rx_q();
++ writel(0, &toe->gmac[0].default_qhdr->word1);
++ }
++ if (toe->gmac[1].default_qhdr->word1.bits32)
++ {
++ // printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1);
++ sl351x_gmac_release_rx_q();
++ writel(0, &toe->gmac[1].default_qhdr->word1);
++ }
++
++ gmac_initialized = 1;
++
++#ifdef CONFIG_SL351x_NAT
++ writel(0, TOE_GLOBAL_BASE + 0x4084);
++#endif
++
++ for (i=0; i<GMAC_NUM; i++)
++ {
++ tp=(GMAC_INFO_T *)&toe->gmac[i];
++ if (tp->operation)
++ {
++ toe_gmac_enable_interrupt(tp->irq);
++ toe_gmac_hw_start(tp->dev);
++ toe_gmac_enable_tx_rx(tp->dev);
++ netif_wake_queue(tp->dev);
++ set_bit(__LINK_STATE_START, &tp->dev->state);
++ }
++ }
++
++ gmac_in_do_workaround = 0;
++ add_timer(&gmac_workround_timer_obj);
++}
++
++/*----------------------------------------------------------------------
++* get_free_desc_cnt
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int get_free_desc_cnt(unsigned long rwptr, int total)
++{
++ unsigned short wptr = rwptr & 0xffff;
++ unsigned short rptr = rwptr >> 16;
++
++ if (wptr >= rptr)
++ return (total - wptr + rptr);
++ else
++ return (rptr - wptr);
++}
++#endif
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_buffers
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_buffers(void)
++{
++ // Free buffers & Descriptors in all SW Tx Queues
++ sl351x_gmac_release_swtx_q();
++
++ // Free buffers in Default Rx Queues
++ sl351x_gmac_release_rx_q();
++
++#ifdef _TOEQ_CLASSQ_READY_
++ // Free buffers in Classification Queues
++ sl351x_gmac_release_class_q();
++
++ // Free buffers in TOE Queues
++ sl351x_gmac_release_toe_q();
++
++ // Free buffers in Interrupt Queues
++ sl351x_gmac_release_intr_q();
++#endif
++
++ // Free buffers & descriptors in SW free queue
++ sl351x_gmac_release_sw_free_q();
++
++ // Free buffers & descriptors in HW free queue
++ sl351x_gmac_release_hw_free_q();
++
++#ifdef CONFIG_SL351x_NAT
++ // Free buffers & descriptors in HW free queue
++ sl351x_gmac_release_hwtx_q();
++#endif
++}
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_swtx_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_swtx_q(void)
++{
++ int i, j;
++ GMAC_TXDESC_T *curr_desc;
++ unsigned int desc_count;
++ TOE_INFO_T *toe;
++ GMAC_INFO_T *tp;
++ GMAC_SWTXQ_T *swtxq;
++ DMA_RWPTR_T rwptr;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ tp = (GMAC_INFO_T *)&toe->gmac[0];
++ for (i=0; i<GMAC_NUM; i++, tp++)
++ {
++ if (!tp->existed) continue;
++ swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0];
++ for (j=0; j<TOE_SW_TXQ_NUM; j++, swtxq++)
++ {
++ for (;;)
++ {
++ rwptr.bits32 = readl(swtxq->rwptr_reg);
++ if (rwptr.bits.rptr == swtxq->finished_idx)
++ break;
++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++ // if (curr_desc->word0.bits.status_tx_ok)
++ {
++ desc_count = curr_desc->word0.bits.desc_count;
++ while (--desc_count)
++ {
++ curr_desc->word0.bits.status_tx_ok = 0;
++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++ }
++
++ curr_desc->word0.bits.status_tx_ok = 0;
++ if (swtxq->tx_skb[swtxq->finished_idx])
++ {
++ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
++ swtxq->tx_skb[swtxq->finished_idx] = NULL;
++ }
++ }
++ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
++ }
++ writel(0, swtxq->rwptr_reg);
++ swtxq->finished_idx = 0;
++ }
++ }
++
++}
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_rx_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_rx_q(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ GMAC_INFO_T *tp;
++ DMA_RWPTR_T rwptr;
++ volatile GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *skb;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ tp = (GMAC_INFO_T *)&toe->gmac[0];
++ for (i=0; i<GMAC_NUM; i++, tp++)
++ {
++ if (!tp->existed) continue;
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++ while (rwptr.bits.rptr != rwptr.bits.wptr)
++ {
++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ dev_kfree_skb_irq(skb);
++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
++ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++ } // while
++ writel(0, &tp->default_qhdr->word1);
++ tp->rx_rwptr.bits32 = 0;
++ } // for
++
++}
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_class_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_class_q(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ CLASSQ_INFO_T *classq;
++ DMA_RWPTR_T rwptr;
++ volatile GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *skb;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ classq = (CLASSQ_INFO_T *)&toe->classq[0];
++ for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++)
++ {
++ rwptr.bits32 = readl(&classq->qhdr->word1);
++ while (rwptr.bits.rptr != rwptr.bits.wptr)
++ {
++ curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr;
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ dev_kfree_skb_irq(skb);
++ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num);
++ SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr);
++ rwptr.bits32 = readl(&classq->qhdr->word1);
++ } // while
++ writel(0, &classq->qhdr->word1);
++ classq->rwptr.bits32 = 0;
++ } // for
++
++}
++#endif
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_toe_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_toe_q(void)
++{
++ int i;
++ TOE_INFO_T *toe;
++ TOEQ_INFO_T *toeq_info;
++ TOE_QHDR_T *toe_qhdr;
++ DMA_RWPTR_T rwptr;
++ volatile GMAC_RXDESC_T *curr_desc;
++ unsigned int rptr, wptr;
++ GMAC_RXDESC_T *toe_curr_desc;
++ struct sk_buff *skb;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
++ for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++)
++ {
++ toeq_info = (TOEQ_INFO_T *)&toe->toeq[i];
++ wptr = toe_qhdr->word1.bits.wptr;
++ rptr = toe_qhdr->word1.bits.rptr;
++ while (rptr != wptr)
++ {
++ toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr;
++ skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ dev_kfree_skb_irq(skb);
++ rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num);
++ SET_RPTR(&toe_qhdr->word1.bits32, rptr);
++ wptr = toe_qhdr->word1.bits.wptr;
++ rptr = toe_qhdr->word1.bits.rptr;
++ }
++ toe_qhdr->word1.bits32 = 0;
++ toeq_info->rwptr.bits32 = 0;
++ }
++}
++#endif
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_intr_q
++*----------------------------------------------------------------------*/
++#ifdef _TOEQ_CLASSQ_READY_
++static void sl351x_gmac_release_intr_q(void)
++{
++}
++#endif
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_sw_free_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_sw_free_q(void)
++{
++ TOE_INFO_T *toe;
++ volatile DMA_RWPTR_T fq_rwptr;
++ volatile GMAC_RXDESC_T *fq_desc;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr)
++ {
++ struct sk_buff *skb;
++ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
++ {
++ printk("%s::skb buffer allocation fail !\n",__func__); while(1);
++ }
++ // *(unsigned int *)(skb->data) = (unsigned int)skb;
++ REG32(skb->data) = (unsigned long)skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES);
++
++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++ fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ }
++
++ toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
++ toe->fq_rx_rwptr.bits.rptr = 0;
++ writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++
++}
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_hw_free_q
++*----------------------------------------------------------------------*/
++static void sl351x_gmac_release_hw_free_q(void)
++{
++ DMA_RWPTR_T rwptr_reg;
++
++#ifdef CONFIG_SL351x_NAT
++ int i;
++ TOE_INFO_T *toe;
++ GMAC_RXDESC_T *desc_ptr;
++ unsigned int buf_ptr;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
++ {
++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
++ desc_ptr->word1.bits.sw_id = i;
++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++ desc_ptr++;
++ buf_ptr += HW_RX_BUF_SIZE;
++ }
++#endif
++ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
++ rwptr_reg.bits.rptr = 0;
++ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++}
++
++/*----------------------------------------------------------------------
++* sl351x_gmac_release_hw_free_q
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void sl351x_gmac_release_hwtx_q(void)
++{
++ int i;
++ unsigned int rwptr_addr;
++
++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ writel(0, rwptr_addr);
++ rwptr_addr+=4;
++ }
++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ writel(0, rwptr_addr);
++ rwptr_addr+=4;
++ }
++}
++#endif
++
++/*----------------------------------------------------------------------
++* sl351x_gmac_save_reg
++*----------------------------------------------------------------------*/
++void sl351x_gmac_save_reg(void)
++{
++ int i;
++ volatile u32 *destp;
++ unsigned int srce_addr;
++
++ srce_addr = TOE_GLOBAL_BASE;
++ destp = (volatile u32 *)toe_global_reg;
++ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, destp++, srce_addr+=4)
++ *destp = readl(srce_addr);
++
++ srce_addr = TOE_GMAC0_DMA_BASE;
++ destp = (volatile u32 *)&toe_dma_reg[0][0];
++ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4)
++ {
++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38))
++ srce_addr = (TOE_GMAC0_DMA_BASE+0x50);
++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58))
++ srce_addr = (TOE_GMAC0_DMA_BASE+0x70);
++
++ *destp = readl(srce_addr);
++ }
++ srce_addr = TOE_GMAC1_DMA_BASE;
++ destp = (volatile u32 *)&toe_dma_reg[1][0];
++ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4)
++ {
++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38))
++ srce_addr = (TOE_GMAC0_DMA_BASE+0x50);
++ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58))
++ srce_addr = (TOE_GMAC0_DMA_BASE+0x70);
++
++ *destp = readl(srce_addr);
++ }
++
++ srce_addr = TOE_GMAC0_BASE;
++ destp = (volatile u32 *)&toe_gmac_reg[0][0];
++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4)
++ *destp = readl(srce_addr);
++
++ srce_addr = TOE_GMAC1_BASE;
++ destp = (volatile u32 *)&toe_gmac_reg[1][0];
++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4)
++ *destp = readl(srce_addr);
++}
++
++/*----------------------------------------------------------------------
++* sl351x_gmac_restore_reg
++*----------------------------------------------------------------------*/
++void sl351x_gmac_restore_reg(void)
++{
++ int i;
++ volatile u32 *srcep;
++ unsigned int dest_addr;
++
++ srcep = (volatile u32 *)&toe_dma_reg[0][0];
++ dest_addr = TOE_GMAC0_DMA_BASE;
++ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++)
++ {
++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38))
++ dest_addr = (TOE_GMAC0_DMA_BASE+0x50);
++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58))
++ dest_addr = (TOE_GMAC0_DMA_BASE+0x70);
++
++ writel(*srcep, dest_addr);
++ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff);
++ }
++ srcep = (volatile u32 *)&toe_dma_reg[1][0];
++ dest_addr = TOE_GMAC1_DMA_BASE;
++ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++)
++ {
++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38))
++ dest_addr = (TOE_GMAC0_DMA_BASE+0x50);
++ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58))
++ dest_addr = (TOE_GMAC0_DMA_BASE+0x70);
++
++ writel(*srcep, dest_addr);
++ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff);
++ }
++
++ srcep = (volatile u32 *)&toe_gmac_reg[0][0];
++ dest_addr = TOE_GMAC0_BASE;
++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++)
++ writel(*srcep, dest_addr);
++
++ srcep = (volatile u32 *)&toe_gmac_reg[1][0];
++ dest_addr = TOE_GMAC1_BASE;
++ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++)
++ writel(*srcep, dest_addr);
++
++ srcep = (volatile u32 *)toe_global_reg;
++ dest_addr = TOE_GLOBAL_BASE;
++ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, dest_addr+=4, srcep++)
++ writel(*srcep, dest_addr);
++
++}
++
++#ifdef CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* sl351x_nat_workaround_init
++*----------------------------------------------------------------------*/
++#define NAT_WORAROUND_DESC_POWER (6)
++#define NAT_WORAROUND_DESC_NUM (2 << NAT_WORAROUND_DESC_POWER)
++dma_addr_t sl351x_nat_workaround_desc_dma;
++void sl351x_nat_workaround_init(void)
++{
++ unsigned int desc_buf;
++
++ desc_buf = (unsigned int)DMA_MALLOC((NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T)),
++ (dma_addr_t *)&sl351x_nat_workaround_desc_dma) ;
++ memset((void *)desc_buf, 0, NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T));
++
++ // DMA Queue Base & Size
++ writel((sl351x_nat_workaround_desc_dma & DMA_Q_BASE_MASK) | NAT_WORAROUND_DESC_POWER,
++ TOE_GLOBAL_BASE + 0x4080);
++ writel(0, TOE_GLOBAL_BASE + 0x4084);
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_workaround_handler
++*----------------------------------------------------------------------*/
++#ifndef NAT_WORKAROUND_BY_RESET_GMAC
++static void sl351x_nat_workaround_handler(void)
++{
++ int i;
++ DMA_RWPTR_T rwptr;
++ GMAC_RXDESC_T *desc_ptr;
++ unsigned int buf_ptr;
++ TOE_INFO_T *toe;
++ GMAC_CONFIG0_T config0;
++ unsigned int rwptr_addr;
++
++ toe = (TOE_INFO_T *)&toe_private_data;
++
++ // disable Rx of GMAC-0 & 1
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 1;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++
++ // wait GMAC-0 HW Tx finished
++ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ rwptr.bits32 = readl(rwptr_addr);
++ if (rwptr.bits.rptr != rwptr.bits.wptr)
++ return; // wait the HW to send packets and release buffers
++ rwptr_addr+=4;
++ }
++ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ rwptr.bits32 = readl(rwptr_addr);
++ if (rwptr.bits.rptr != rwptr.bits.wptr)
++ return; // wait the HW to send packets and release buffers
++ rwptr_addr+=4;
++ }
++
++ // printk("sl351x_nat_workaround_handler %d\n", sl351x_nat_workaround_cnt);
++ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
++ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
++ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
++ {
++ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
++ desc_ptr->word1.bits.sw_id = i;
++ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
++ desc_ptr++;
++ buf_ptr += HW_RX_BUF_SIZE;
++ }
++ rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++ rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM);
++ writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
++ writel(0, TOE_GLOBAL_BASE + 0x4084);
++
++ // Enable Rx of GMAC-0 & 1
++ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
++ config0.bits.dis_rx = 0;
++ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
++}
++#endif
++#endif // CONFIG_SL351x_NAT
++
++#endif // SL351x_GMAC_WORKAROUND
++
++/* get the mac addresses from flash
++ *can't do this in module_init because mtd driver is initialized after ethernet
++ */
++static __init int sl351x_mac_address_init(void)
++{
++ GMAC_INFO_T *tp;
++ struct sockaddr sock;
++ int i;
++
++ /* get mac address from FLASH */
++ gmac_get_mac_address();
++
++ for (i = 0; i < GMAC_NUM; i++) {
++ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
++ memcpy(&sock.sa_data[0],&eth_mac[tp->port_id][0],6);
++ gmac_set_mac_address(tp->dev,(void *)&sock);
++ }
++
++ return 0;
++}
++late_initcall(sl351x_mac_address_init);
++
++
+Index: linux-2.6.23.16/drivers/net/sl351x_hash.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_hash.c 2008-03-15 16:59:32.361970401 +0200
+@@ -0,0 +1,713 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl351x_hash.c
++* Description :
++* Handle Storlink SL351x Hash Functions
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* 03/13/2006 Gary Chen Create and implement
++*
++****************************************************************************/
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/it8712.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/skbuff.h>
++#include <linux/in.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/list.h>
++#define MIDWAY
++#define SL_LEPUS
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <asm/arch/sl351x_hash_cfg.h>
++
++#ifndef RXTOE_DEBUG
++#define RXTOE_DEBUG
++#endif
++#undef RXTOE_DEBUG
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define hash_printf printk
++
++#define HASH_TIMER_PERIOD (30) // seconds
++#define HASH_ILLEGAL_INDEX 0xffff
++
++/*----------------------------------------------------------------------
++* Variables
++*----------------------------------------------------------------------*/
++u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++static struct timer_list hash_timer_obj;
++LIST_HEAD(hash_timeout_list);
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length);
++static void hash_timer_func(u32 data);
++
++/*----------------------------------------------------------------------
++* hash_init
++*----------------------------------------------------------------------*/
++void sl351x_hash_init(void)
++{
++ int i;
++ volatile u32 *dp1, *dp2, dword;
++
++ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
++ {
++ *dp1++ = 0;
++ dword = *dp2++; // read-clear
++ }
++ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits));
++ memset((void *)&hash_tables, 0, sizeof(hash_tables));
++
++ init_timer(&hash_timer_obj);
++ hash_timer_obj.expires = jiffies + (HASH_TIMER_PERIOD * HZ);
++ hash_timer_obj.data = (unsigned long)&hash_timer_obj;
++ hash_timer_obj.function = (void *)&hash_timer_func;
++ add_timer(&hash_timer_obj);
++
++#if (HASH_MAX_BYTES == 128)
++ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words
++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
++#elif (HASH_MAX_BYTES == 64)
++ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words
++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
++#else
++ #error Incorrect setting for HASH_MAX_BYTES
++#endif
++
++}
++/*----------------------------------------------------------------------
++* hash_add_entry
++*----------------------------------------------------------------------*/
++int hash_add_entry(HASH_ENTRY_T *entry)
++{
++ int rc;
++ u32 key[HASH_MAX_DWORDS];
++ rc = hash_build_keys((u32 *)&key, entry);
++ if (rc < 0)
++ return -1;
++ hash_write_entry(entry, (unsigned char*) &key[0]);
++// hash_set_valid_flag(entry->index, 1);
++// printk("Dump hash key!\n");
++// dump_hash_key(entry);
++ return entry->index;
++}
++
++/*----------------------------------------------------------------------
++* hash_set_valid_flag
++*----------------------------------------------------------------------*/
++void hash_set_valid_flag(int index, int valid)
++{
++ register u32 reg32;
++
++ reg32 = TOE_V_BIT_BASE + (index/32) * 4;
++
++ if (valid)
++ {
++ writel(readl(reg32) | (1 << (index%32)), reg32);
++ }
++ else
++ {
++ writel(readl(reg32) & ~(1 << (index%32)), reg32);
++ }
++}
++
++/*----------------------------------------------------------------------
++* hash_set_nat_owner_flag
++*----------------------------------------------------------------------*/
++void hash_set_nat_owner_flag(int index, int valid)
++{
++ if (valid)
++ {
++ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++ }
++ else
++ {
++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++ }
++}
++
++
++/*----------------------------------------------------------------------
++* hash_build_keys
++*----------------------------------------------------------------------*/
++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++ u32 data;
++ unsigned char *cp;
++ int i, j;
++ unsigned short index;
++ int total;
++
++ memset((void *)destp, 0, HASH_MAX_BYTES);
++ cp = (unsigned char *)destp;
++
++ if (entry->key_present.port || entry->key_present.Ethertype)
++ {
++ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0
++ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2
++ HASH_PUSH_BYTE(cp, 0); // Byte 3
++ }
++ else
++ {
++ HASH_PUSH_DWORD(cp, 0);
++ }
++
++ if (entry->key_present.da || entry->key_present.sa)
++ {
++ unsigned char mac[4];
++ if (entry->key_present.da)
++ {
++ for (i=0; i<4; i++)
++ HASH_PUSH_BYTE(cp, entry->key.da[i]);
++ }
++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++ HASH_PUSH_DWORD(cp, data);
++ if (entry->key_present.sa)
++ {
++ for (i=2; i<6; i++)
++ HASH_PUSH_BYTE(cp, entry->key.sa[i]);
++ }
++ }
++
++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++ {
++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
++ }
++ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0
++ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1
++ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2
++ HASH_PUSH_BYTE(cp, 0); // Byte 3
++ }
++
++ if (entry->key_present.ipv6_flow_label)
++ {
++ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word
++ }
++ if (entry->key_present.sip)
++ {
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++ if (entry->key.ipv6)
++ {
++ for (i=4; i<16; i+=4)
++ {
++ for (j=i+3; j>=i; j--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[j]);
++ }
++ }
++ }
++ if (entry->key_present.dip)
++ {
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++ if (entry->key.ipv6)
++ {
++ for (i=4; i<16; i+=4)
++ {
++ for (j=i+3; j>=i; j--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[j]);
++ }
++ }
++ }
++
++ if (entry->key_present.l4_bytes_0_3)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++ }
++ if (entry->key_present.l4_bytes_4_7)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
++ }
++ if (entry->key_present.l4_bytes_8_11)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
++ }
++ if (entry->key_present.l4_bytes_12_15)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
++ }
++ if (entry->key_present.l4_bytes_16_19)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
++ }
++ if (entry->key_present.l4_bytes_20_23)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
++ }
++ if (entry->key_present.l7_bytes_0_3)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
++ }
++ if (entry->key_present.l7_bytes_4_7)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
++ }
++ if (entry->key_present.l7_bytes_8_11)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
++ }
++ if (entry->key_present.l7_bytes_12_15)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
++ }
++ if (entry->key_present.l7_bytes_16_19)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
++ }
++ if (entry->key_present.l7_bytes_20_23)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
++ }
++
++ // get hash index
++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++ if (total > HASH_MAX_KEY_DWORD)
++ {
++ //hash_printf("Total key words (%d) is too large (> %d)!\n",
++ // total, HASH_MAX_KEY_DWORD);
++ return -1;
++ }
++
++ if (entry->key_present.port || entry->key_present.Ethertype)
++ index = hash_gen_crc16((unsigned char *)destp, total * 4);
++ else
++ {
++ if (total == 1)
++ {
++ hash_printf("No key is assigned!\n");
++ return -1;
++ }
++
++ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
++ }
++
++ entry->index = index & HASH_BITS_MASK;
++
++ //hash_printf("Total key words = %d, Hash Index= %d\n",
++ // total, entry->index);
++
++ cp = (unsigned char *)destp;
++ cp+=3;
++ HASH_PUSH_BYTE(cp, entry->rule); // rule
++
++ entry->total_dwords = total;
++
++ return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_nat_keys
++*----------------------------------------------------------------------*/
++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++ unsigned char *cp;
++ int i;
++ unsigned short index;
++ int total;
++
++ memset((void *)destp, 0, HASH_MAX_BYTES);
++
++ cp = (unsigned char *)destp + 2;
++ HASH_PUSH_BYTE(cp, entry->key.port);
++ cp++;
++
++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++ {
++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
++ }
++
++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
++ cp+=3;
++
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++
++ // get hash index
++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++ index = hash_gen_crc16((unsigned char *)destp, total * 4);
++ entry->index = index & ((1 << HASH_BITS) - 1);
++
++ cp = (unsigned char *)destp;
++ cp+=3;
++ HASH_PUSH_BYTE(cp, entry->rule); // rule
++
++ entry->total_dwords = total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_toe_keys
++*----------------------------------------------------------------------*/
++int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++ unsigned long data;
++ unsigned char *cp;
++ unsigned short index;
++ int i;
++ int total;
++ //printk("%s\n", __func__);
++ memset((void*)destp, 0, HASH_MAX_BYTES);
++ cp = (unsigned char*)destp;
++
++ if(entry->key_present.port || entry->key_present.Ethertype) {
++ data = (entry->key.port << 16) + entry->key.Ethertype;
++ HASH_PUSH_DWORD(cp, data);
++ } else
++ HASH_PUSH_DWORD(cp, 0);
++
++ if (entry->key_present.da || entry->key_present.sa) {
++ unsigned char mac[4];
++ if (entry->key_present.da) {
++ data = (entry->key.da[0]) + (entry->key.da[1] << 8) +
++ (entry->key.da[2] << 16) + (entry->key.da[3] <<24);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++ HASH_PUSH_DWORD(cp, data);
++ if (entry->key_present.sa) {
++ data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) +
++ (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ }
++
++ if (entry->key_present.ip_protocol) {
++ unsigned char ip_protocol;
++ ip_protocol = entry->key.ip_protocol;
++ data = ip_protocol;
++ HASH_PUSH_DWORD(cp, data);
++ }
++
++ if (entry->key_present.ipv6_flow_label) {
++ unsigned long flow_label;
++ flow_label = entry->key.ipv6_flow_label;
++ data = flow_label & 0xfffff;
++ HASH_PUSH_DWORD(cp, data);
++ }
++
++ if (entry->key_present.sip) {
++ {
++ data = IPIV(entry->key.sip[0], entry->key.sip[1],
++ entry->key.sip[2], entry->key.sip[3]);
++ HASH_PUSH_DWORD(cp, data);
++ if (entry->key.ipv6) {
++ for (i=4; i<16; i+=4) {
++ data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1],
++ entry->key.sip[i+2], entry->key.sip[i+3]);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ }
++ }
++ }
++
++ if (entry->key_present.dip) {
++ {
++ data = IPIV(entry->key.dip[0], entry->key.dip[1],
++ entry->key.dip[2], entry->key.dip[3]);
++ HASH_PUSH_DWORD(cp, data);
++ if (entry->key.ipv6) {
++ for (i=4; i<16; i+=4) {
++ data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1],
++ entry->key.dip[i+2], entry->key.dip[i+3]);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ }
++ }
++ }
++ if (entry->key_present.l4_bytes_0_3)
++ {
++ unsigned char *datap;
++ datap = &entry->key.l4_bytes[0];
++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ if (entry->key_present.l7_bytes_0_3)
++ {
++ unsigned char *datap;
++ datap = &entry->key.l7_bytes[0];
++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++ HASH_PUSH_DWORD(cp, data);
++ }
++ if (entry->key_present.l7_bytes_4_7)
++ {
++ unsigned char *datap;
++ datap = &entry->key.l7_bytes[4];
++ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
++ HASH_PUSH_DWORD(cp, data);
++ }
++
++ total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32));
++ if (total > HASH_MAX_KEY_DWORD) {
++ //printf("Total key words (%d) is too large (> %d)!\n",
++ // total, HASH_MAX_KEY_DWORD);
++ return -1;
++ }
++ index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4);
++ entry->index = index & ((1 << HASH_BITS)-1);
++
++ cp = (unsigned char*) destp;
++ cp += 3;
++ HASH_PUSH_BYTE(cp, entry->rule);
++ entry->total_dwords = total;
++ return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_add_toe_entry
++*----------------------------------------------------------------------*/
++int hash_add_toe_entry(HASH_ENTRY_T *entry)
++{
++ int rc;
++ u32 key[HASH_MAX_DWORDS];
++
++ rc = hash_build_toe_keys((u32 *)&key, entry);
++ if (rc < 0)
++ return -1;
++ hash_write_entry(entry, (unsigned char*) &key[0]);
++ //hash_dump_entry(entry->index);
++// hash_set_valid_flag(entry->index, 1);
++// printk("Dump hash key!\n");
++// dump_hash_key(entry);
++ return entry->index;
++}
++
++
++/*----------------------------------------------------------------------
++* hash_write_entry
++*----------------------------------------------------------------------*/
++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
++{
++ int i;
++ u32 *srcep, *destp, *destp2;
++
++ srcep = (u32 *)key;
++ destp2 = destp = (u32 *)&hash_tables[entry->index][0];
++
++ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
++ *destp = *srcep;
++
++ srcep = (u32 *)&entry->action;
++ *destp++ = *srcep;
++
++ srcep = (u32 *)&entry->param;
++ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
++ *destp = *srcep;
++
++ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
++
++ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* hash_timer_func
++*----------------------------------------------------------------------*/
++static void hash_timer_func(u32 data)
++{
++ int i, j, idx;
++ volatile u32 *own_p, *valid_p;
++ u32 own_bits, a_bits;
++ int period = HASH_TIMER_PERIOD;
++
++ valid_p = (volatile u32 *)TOE_V_BIT_BASE;
++ own_p = (volatile u32 *)hash_nat_owner_bits;
++ for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32)
++ {
++ a_bits = readl(TOE_A_BIT_BASE + (i*4));
++ own_bits = *own_p;
++ if (own_bits)
++ {
++ for (j=0; own_bits && j<32; j++)
++ {
++ if (own_bits & 1)
++ {
++ short *counter_p, *interval_p;
++ NAT_HASH_ENTRY_T *nat_entry;
++ GRE_HASH_ENTRY_T *gre_entry;
++ nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j);
++ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
++ if (nat_entry->key.ip_protocol == IPPROTO_GRE)
++ {
++ counter_p = (short *)&gre_entry->tmo.counter;
++ interval_p = (short *)&gre_entry->tmo.interval;
++ }
++ else
++ {
++ counter_p = (short *)&nat_entry->tmo.counter;
++ interval_p = (short *)&nat_entry->tmo.interval;
++ }
++ if (a_bits & 1)
++ {
++ *counter_p = *interval_p;
++ }
++ else
++ {
++ *counter_p -= HASH_TIMER_PERIOD;
++ if (*counter_p <= 0)
++ {
++ *valid_p &= ~(1 << j); // invalidate it
++ *own_p &= ~(1 << j); // release ownership for NAT
++ *counter_p = 0;
++ // hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
++ }
++ else if (period > *counter_p)
++ {
++ period = *counter_p;
++ }
++ }
++ }
++ a_bits >>= 1;
++ own_bits >>=1;
++ }
++ }
++ }
++
++ hash_timer_obj.expires = jiffies + (period * HZ);
++ add_timer((struct timer_list *)data);
++}
++
++/*----------------------------------------------------------------------
++* dm_long
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length)
++{
++ u32 *start_p, *curr_p, *end_p;
++ u32 *datap, data;
++ int i;
++
++ //if (length > 1024)
++ // length = 1024;
++
++ start_p = (u32 *)location;
++ end_p = (u32 *)location + length;
++ curr_p = (u32 *)((u32)location & 0xfffffff0);
++ datap = (u32 *)location;
++ while (curr_p < end_p)
++ {
++ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
++ for (i=0; i<4; i++)
++ {
++ if (curr_p < start_p || curr_p >= end_p)
++ hash_printf(" ");
++ else
++ {
++ data = *datap;
++ hash_printf("%08X ", data);
++ }
++ if (i==1)
++ hash_printf("- ");
++
++ curr_p++;
++ datap++;
++ }
++ hash_printf("\n");
++ }
++}
++
++/*----------------------------------------------------------------------
++* hash_dump_entry
++*----------------------------------------------------------------------*/
++void hash_dump_entry(int index)
++{
++ hash_printf("Hash Index %d:\n", index);
++ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
++}
++
++
+Index: linux-2.6.23.16/drivers/net/sl351x_nat.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_nat.c 2008-03-15 16:59:39.862397640 +0200
+@@ -0,0 +1,1736 @@
++/****************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*----------------------------------------------------------------------------
++* Name : sl351x_nat.c
++* Description :
++* Handle Storlink SL351x NAT Functions
++*
++*
++* Packet Flow:
++*
++* (xmit)+<--- SW NAT -->+(xmit)
++* | ^^ |
++* | || |
++* | || |
++* Client <---> GMAC-x HW-NAT GMAC-y <---> Server
++*
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* 03/13/2006 Gary Chen Create and implement
++*
++*
++****************************************************************************/
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/it8712.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/skbuff.h>
++#include <linux/if_ether.h>
++#include <linux/if_pppox.h>
++#include <linux/in.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/udp.h>
++#include <linux/ppp_defs.h>
++
++#define MIDWAY
++#define SL_LEPUS
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <asm/arch/sl351x_hash_cfg.h>
++#include <asm/arch/sl351x_nat_cfg.h>
++#ifdef CONFIG_NETFILTER
++#include <linux/netfilter_ipv4/ip_conntrack.h>
++#include <linux/netfilter_ipv4/ip_conntrack_tcp.h>
++#endif
++
++//#define NAT_DEBUG_MSG 1
++#define _NOT_CHECK_SIP_DIP
++//#define SL351x_NAT_TEST_BY_SMARTBITS 1 // Initialize 32 hash entries and test by SmartBITS
++#define VITESSE_G5SWITCH 1
++
++#ifdef CONFIG_SL351x_NAT
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL3516_ASIC
++#define CONFIG_SL351x_NAT_TCP_UDP
++#define CONFIG_SL351x_NAT_GRE
++#define CONFIG_SL351x_TCP_UDP_RULE_ID 0
++#define CONFIG_SL351x_GRE_RULE_ID 1
++#else
++#define CONFIG_SL351x_NAT_TCP_UDP
++//#define CONFIG_SL351x_NAT_GRE
++#define CONFIG_SL351x_TCP_UDP_RULE_ID 0
++#define CONFIG_SL351x_GRE_RULE_ID 0
++#endif
++
++#define nat_printf printk
++#define NAT_FTP_CTRL_PORT (21) // TCP
++#define NAT_H323_PORT (1720) // TCP
++#define NAT_T120_PORT (1503) // TCP
++#define NAT_PPTP_PORT (1723) // TCP
++#define NAT_TFTP_PORT (69) // UDP
++#define NAT_DNS_PORT (53) // UDP
++#define NAT_NTP_PORT (123) // UDP
++#define NAT_RAS_PORT (1719) // UDP
++#define NAT_BOOTP67_PORT (67) // UDP
++#define NAT_BOOTP68_PORT (68) // UDP
++
++#define NAT_TCP_PORT_MAX 64
++#define NAT_UDP_PORT_MAX 64
++
++#define GRE_PROTOCOL (0x880b)
++#define GRE_PROTOCOL_SWAP __constant_htons(0x880b)
++
++#ifdef VITESSE_G5SWITCH
++extern int Giga_switch;
++#endif
++
++typedef struct
++{
++ u16 flags_ver;
++ u16 protocol;
++ u16 payload_length;
++ u16 call_id;
++ u32 seq;
++ u32 ack;
++} GRE_PKTHDR_T;
++
++/*----------------------------------------------------------------------
++* NAT Configuration
++*
++* Note: Any change for network setting, the NAT configuration should
++* be changed also.
++* cfg->lan_port 0 if GMAC-0, 1: if GMAC-1
++* cfg->wan_port 0 if GMAC-0, 1: if GMAC-1
++* cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask
++* cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask
++*
++*----------------------------------------------------------------------*/
++NAT_CFG_T nat_cfg;
++static int nat_initialized;
++u32 nat_collision;
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++static u16 fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT,
++ NAT_H323_PORT,
++ // NAT_T120_PORT,
++ NAT_PPTP_PORT,
++ 0};
++static u16 fixed_udp_port_list[]={NAT_DNS_PORT,
++ NAT_NTP_PORT,
++ NAT_TFTP_PORT,
++ NAT_RAS_PORT,
++ NAT_BOOTP67_PORT,
++ NAT_BOOTP68_PORT,
++ 0};
++#endif
++
++// #define _HAVE_DYNAMIC_PORT_LIST
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++static u16 dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1];
++static u16 dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]};
++#endif
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port);
++int sl351x_nat_udp_output(struct sk_buff *skb, int port);
++int sl351x_nat_gre_output(struct sk_buff *skb, int port);
++
++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++extern void hash_dump_entry(int index);
++extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
++extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
++
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++static void nat_init_test_entry(void);
++#endif
++/*----------------------------------------------------------------------
++* sl351x_nat_init
++* initialize a NAT matching rule
++* Called by SL351x Driver
++* key : port, protocol, Sip, Dip, Sport, Dport
++* Action : Srce Q: HW Free Queue,
++* Dest Q: HW TxQ
++* Change DA
++* Change SA
++* Change Sip or Dip
++* Change Sport or Dport
++*----------------------------------------------------------------------*/
++void sl351x_nat_init(void)
++{
++ int rc;
++ GMAC_MRxCR0_T mrxcr0;
++ GMAC_MRxCR1_T mrxcr1;
++ GMAC_MRxCR2_T mrxcr2;
++ NAT_CFG_T *cfg;
++
++ if (nat_initialized)
++ return;
++
++ nat_initialized = 1;
++
++ if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) ||
++ (sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES))
++ {
++ nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n");
++ while(1);
++ }
++
++ cfg = (NAT_CFG_T *)&nat_cfg;
++ memset((void *)cfg, 0, sizeof(NAT_CFG_T));
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++ memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list));
++ memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list));
++#endif
++
++#ifdef VITESSE_G5SWITCH
++ if(Giga_switch)
++ {
++ cfg->enabled = 1;
++ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID;
++ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID;
++ cfg->lan_port = 1;
++ cfg->wan_port = 0;
++ cfg->default_hw_txq = 3;
++ cfg->tcp_tmo_interval = 60;
++ cfg->udp_tmo_interval = 180;
++ cfg->gre_tmo_interval = 60;
++ }
++ else
++ {
++ cfg->enabled = 1;
++ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID;
++ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID;
++ cfg->lan_port = 0;
++ cfg->wan_port = 1;
++ cfg->default_hw_txq = 3;
++ cfg->tcp_tmo_interval = 60;
++ cfg->udp_tmo_interval = 180;
++ cfg->gre_tmo_interval = 60;
++
++ }
++#endif
++
++#if 1 // debug purpose
++ cfg->ipcfg[0].total = 1;
++ cfg->ipcfg[0].entry[0].ipaddr = IPIV(192,168,2,92);
++ cfg->ipcfg[0].entry[0].netmask = IPIV(255,255,255,0);
++ cfg->ipcfg[1].total = 1;
++ cfg->ipcfg[1].entry[0].ipaddr = IPIV(192,168,1,200);
++ cfg->ipcfg[1].entry[0].netmask = IPIV(255,255,255,0);
++#endif
++
++#if 1
++ cfg->xport.total = 0;
++#else
++ cfg->xport.total = 4;
++
++ // H.323/H.225 Call setup
++ cfg->xport.entry[0].protocol = IPPROTO_TCP;
++ cfg->xport.entry[0].sport_start = 0;
++ cfg->xport.entry[0].sport_end = 0;
++ cfg->xport.entry[0].dport_start = 1720;
++ cfg->xport.entry[0].dport_end = 1720;
++ cfg->xport.entry[1].protocol = IPPROTO_TCP;
++ cfg->xport.entry[1].sport_start = 1720;
++ cfg->xport.entry[1].sport_end = 1720;
++ cfg->xport.entry[1].dport_start = 0;
++ cfg->xport.entry[1].dport_end = 0;
++
++ // RAS Setup
++ cfg->xport.entry[2].protocol = IPPROTO_UDP;
++ cfg->xport.entry[2].sport_start = 0;
++ cfg->xport.entry[2].sport_end = 0;
++ cfg->xport.entry[2].dport_start = 1719;
++ cfg->xport.entry[2].dport_end = 1719;
++ cfg->xport.entry[3].protocol = IPPROTO_UDP;
++ cfg->xport.entry[3].sport_start = 1719;
++ cfg->xport.entry[3].sport_end = 1719;
++ cfg->xport.entry[3].dport_start = 0;
++ cfg->xport.entry[3].dport_end = 0;
++#endif
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++ mrxcr0.bits32 = 0;
++ mrxcr1.bits32 = 0;
++ mrxcr2.bits32 = 0;
++ mrxcr0.bits.port = 1;
++ mrxcr0.bits.l3 = 1;
++ mrxcr0.bits.l4 = 1;
++ mrxcr1.bits.sip = 1;
++ mrxcr1.bits.dip = 1;
++ mrxcr1.bits.l4_byte0_15 = 0x0f; // Byte 0-3
++ mrxcr0.bits.sprx = 3;
++
++ rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++ if (rc < 0)
++ {
++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id);
++ }
++
++ if (cfg->lan_port != cfg->wan_port)
++ {
++ rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++ if (rc < 0)
++ {
++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id);
++ }
++ }
++#endif
++
++#ifdef CONFIG_SL351x_NAT_GRE
++ mrxcr0.bits32 = 0;
++ mrxcr1.bits32 = 0;
++ mrxcr2.bits32 = 0;
++ mrxcr0.bits.port = 1;
++ mrxcr0.bits.l3 = 1;
++ mrxcr0.bits.l4 = 1;
++ mrxcr1.bits.sip = 1;
++ mrxcr1.bits.dip = 1;
++ mrxcr1.bits.l4_byte0_15 = 0xcc; // Byte 2, 3, 6, 7
++ mrxcr0.bits.sprx = 4; // see GMAC driver about SPR
++
++ rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++ if (rc < 0)
++ {
++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id);
++ }
++
++ if (cfg->lan_port != cfg->wan_port)
++ {
++ rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
++ if (rc < 0)
++ {
++ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id);
++ }
++ }
++#endif
++
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++ nat_init_test_entry();
++#endif
++}
++
++/*----------------------------------------------------------------------
++* nat_build_keys
++* Note: To call this routine, the key->rule_id MUST be zero
++*----------------------------------------------------------------------*/
++static inline int nat_build_keys(NAT_KEY_T *key)
++{
++ return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK;
++}
++
++/*----------------------------------------------------------------------
++* gre_build_keys
++* Note: To call this routine, the key->rule_id MUST be zero
++*----------------------------------------------------------------------*/
++static inline int gre_build_keys(GRE_KEY_T *key)
++{
++ return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK;
++}
++
++/*----------------------------------------------------------------------
++* nat_write_hash_entry
++*----------------------------------------------------------------------*/
++static inline int nat_write_hash_entry(int index, void *hash_entry)
++{
++ int i;
++ u32 *srcep, *destp, *destp2;
++
++ srcep = (u32 *)hash_entry;
++ destp = destp2 = (u32 *)&hash_tables[index][0];
++
++ for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++)
++ *destp++ = *srcep++;
++
++ consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* gre_write_hash_entry
++*----------------------------------------------------------------------*/
++static inline int gre_write_hash_entry(int index, void *hash_entry)
++{
++ int i;
++ u32 *srcep, *destp, *destp2;
++
++ srcep = (u32 *)hash_entry;
++ destp = destp2 = (u32 *)&hash_tables[index][0];
++
++ for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++)
++ *destp++ = *srcep++;
++
++ consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_find_ipcfg
++* return NULL if not found
++*----------------------------------------------------------------------*/
++static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port)
++{
++ int i;
++ NAT_IP_ENTRY_T *ipcfg;
++
++ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0];
++ for (i=0; i<nat_cfg.ipcfg[port].total; i++, ipcfg++)
++ {
++ if (ipaddr == ipcfg->ipaddr)
++ {
++ return ipcfg;
++ }
++ }
++ return NULL;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_assign_qid
++*----------------------------------------------------------------------*/
++static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport)
++{
++ int i, total, qid;
++ NAT_WRULE_ENTRY_T *entry;
++
++ for (qid = 0; qid<CONFIG_NAT_TXQ_NUM; qid++)
++ {
++ if (qid == nat_cfg.default_hw_txq)
++ continue;
++
++ entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
++ total = nat_cfg.wrule[qid].total;
++ for (i=0; i<total; i++, entry++)
++ {
++ if (!entry->protocol || entry->protocol==proto)
++ {
++ //if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start)
++ // continue; // UI take care
++ if (entry->sip_start && !((sip >= entry->sip_start) &&
++ (sip <= entry->sip_end)))
++ continue;
++ if (entry->dip_start && !((dip >= entry->dip_start) &&
++ (dip <= entry->dip_end)))
++ continue;
++ if (entry->sport_start && !((sport >= entry->sport_start) &&
++ (sport <= entry->sport_end)))
++ continue;
++ if (entry->dport_start && !((dport >= entry->dport_start)
++ && (dport <= entry->dport_end)))
++ continue;
++ return qid;
++ }
++ }
++ }
++ return nat_cfg.default_hw_txq;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_input
++* Handle NAT input frames
++* Called by SL351x Driver - Handle Default Rx Queue
++* Notes: The caller must make sure that the l3off & l4offset should not be zero.
++* SL351x NAT Frames should meet the following conditions:
++* 1. TCP or UDP frame
++* 2. Cannot be special ALGs ports which TCP/UDP data is updated
++* 3. LAN-IN Frames:
++* Source IP is in the LAN subnet and Destination is not in the LAN subnet
++* 4. WAN-IN Frames
++* Destination IP is in the WAN port IP
++*
++* Example Ports
++* 1. TCP/UDP data is updated
++* (a) FTP Control Packet
++* (b) VoIP Packets
++* (c) etc. (add in future)
++* 2. UDP Low packet rate, not worth
++* (b) TFTP Destination Port is 69
++* (b) DNS 53
++* (c) NTP 123
++* (d) etc. (add in future)
++*----------------------------------------------------------------------*/
++void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off)
++{
++ int i, found;
++ u32 sip, dip;
++ u16 sport, dport;
++ struct ethhdr *ether_hdr;
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ struct pppoe_hdr *pppoe_hdr;
++ NAT_CB_T *nat_cb;
++ u8 proto, pppoe_frame=0;
++ NAT_CFG_T *cfg;
++ u16 ppp_proto;
++ NAT_IP_ENTRY_T *ipcfg;
++ NAT_XPORT_ENTRY_T *xentry;
++ GRE_PKTHDR_T *gre_hdr;
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++ u16 *port_ptr;
++#endif
++
++ cfg = (NAT_CFG_T *)&nat_cfg;
++ if (!cfg->enabled || !cfg->ipcfg[port].total)
++ return;
++
++ ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]);
++ proto = ip_hdr->protocol;
++
++ tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]);
++ gre_hdr = (GRE_PKTHDR_T *)tcp_hdr;
++ sport = ntohs(tcp_hdr->source);
++ dport = ntohs(tcp_hdr->dest);
++
++ sip = ntohl(ip_hdr->saddr);
++ dip = ntohl(ip_hdr->daddr);
++
++ if (dip == IPIV(255,255,255,255))
++ return;
++
++ if (port == cfg->lan_port)
++ {
++ ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0];
++ for (i=0, found=0; i<cfg->ipcfg[port].total; i++, ipcfg++)
++ {
++ u32 subnet = ipcfg->ipaddr & ipcfg->netmask;
++ if (((sip & ipcfg->netmask) == subnet) &&
++ ((dip & ipcfg->netmask) != subnet))
++ {
++ found = 1;
++ break;
++ }
++ }
++ if (!found)
++ return;
++ }
++ else
++ {
++#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
++ if (!sl351x_nat_find_ipcfg(dip, port))
++ {
++ printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip));
++ return;
++ }
++#endif
++ ether_hdr = (struct ethhdr *)skb->data;
++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
++ {
++ pppoe_frame = 1;
++ }
++ }
++
++#ifdef CONFIG_SL351x_NAT_TCP_UDP
++ if (proto == IPPROTO_TCP)
++ {
++#ifdef NAT_DEBUG_MSG
++ nat_printf("From GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++ port, ntohs(ip_hdr->id),
++ NIPQUAD(ip_hdr->saddr), sport,
++ NIPQUAD(ip_hdr->daddr), dport);
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
++ nat_printf("\n");
++#endif
++ // if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))
++ if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))
++ {
++ return;
++ }
++ port_ptr = fixed_tcp_port_list;
++ for (i=0; *port_ptr; i++, port_ptr++)
++ {
++ if (sport == *port_ptr || dport == *port_ptr)
++ return;
++ }
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++ port_ptr = dynamic_tcp_port_list;
++ for (i=0; *port_ptr; i++, port_ptr++)
++ {
++ if (sport == *port_ptr || dport == *port_ptr)
++ return;
++ }
++#endif
++ }
++ else if (proto == IPPROTO_UDP)
++ {
++#ifdef NAT_DEBUG_MSG
++ nat_printf("From GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++ port, ntohs(ip_hdr->id),
++ NIPQUAD(ip_hdr->saddr), sport,
++ NIPQUAD(ip_hdr->daddr), dport);
++ nat_printf("\n");
++#endif
++ port_ptr = fixed_udp_port_list;
++ for (i=0; *port_ptr; i++, port_ptr++)
++ {
++ if (sport == *port_ptr || dport == *port_ptr)
++ return;
++ }
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++ port_ptr = dynamic_udp_port_list;
++ for (i=0; *port_ptr; i++, port_ptr++)
++ {
++ if (sport == *port_ptr || dport == *port_ptr)
++ return;
++ }
++#endif
++ }
++ else
++#endif // CONFIG_SL351x_NAT_TCP_UDP
++#ifdef CONFIG_SL351x_NAT_GRE
++ if (proto == IPPROTO_GRE)
++ {
++ if (gre_hdr->protocol != GRE_PROTOCOL_SWAP)
++ return;
++#ifdef NAT_DEBUG_MSG
++ nat_printf("From GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
++ port, ntohs(ip_hdr->id),
++ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
++ NIPQUAD(ip_hdr->daddr));
++ nat_printf("\n");
++#endif
++ }
++ else
++#endif
++ return;
++
++
++ // check xport list
++ xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0];
++ for (i=0; i<cfg->xport.total; i++, xentry++)
++ {
++ if (!xentry->protocol || xentry->protocol == proto)
++ {
++ //if (!xentry->sport_start && !xentry->dport_start) // UI take care
++ // continue;
++ if (xentry->sport_start && !((sport >= xentry->sport_start) &&
++ (sport <= xentry->sport_end)))
++ continue;
++ if (xentry->dport_start && !((dport >= xentry->dport_start)
++ && (dport <= xentry->dport_end)))
++ continue;
++ return;
++ }
++ }
++
++ nat_cb = NAT_SKB_CB(skb);
++ if (((u32)nat_cb & 3))
++ {
++ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
++ return;
++ }
++ nat_cb->tag = NAT_CB_TAG;
++ memcpy(nat_cb->sa, skb->data+6, 6);
++ nat_cb->sip = ip_hdr->saddr;
++ nat_cb->dip = ip_hdr->daddr;
++ if (proto == IPPROTO_GRE)
++ {
++ nat_cb->sport = gre_hdr->protocol;
++ nat_cb->dport = gre_hdr->call_id;
++ }
++ else
++ {
++ nat_cb->sport = tcp_hdr->source;
++ nat_cb->dport = tcp_hdr->dest;
++ }
++ nat_cb->pppoe_frame = pppoe_frame;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_output
++* Handle NAT output frames
++* Called by SL351x Driver - Transmit
++*
++* 1. If not SL351x NAT frames, return FALSE
++* 2. LAN-to-WAN frames
++* (1) Sip must be WAN IP
++* 3. If TCP SY/RST/FIN frame, return
++* 4. Build the hash key and get the hash index
++* 5. If V-Bit is ON, return.
++* 6. Write hash entry and validate it
++*
++*----------------------------------------------------------------------*/
++int sl351x_nat_output(struct sk_buff *skb, int port)
++{
++ struct iphdr *ip_hdr;
++ u8 proto;
++ NAT_CB_T *nat_cb;
++
++ nat_cb = NAT_SKB_CB(skb);
++ if (nat_cb->tag != NAT_CB_TAG)
++ return 0;
++
++ if (((u32)nat_cb & 3))
++ {
++ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
++ return 0;
++ }
++ ip_hdr = (struct iphdr *)skb->h.ipiph;
++ proto = ip_hdr->protocol;
++
++ switch (proto)
++ {
++ case IPPROTO_TCP:
++ case IPPROTO_UDP:
++ return sl351x_nat_tcp_udp_output(skb, port);
++ case IPPROTO_GRE:
++ return sl351x_nat_gre_output(skb, port);
++ }
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_tcp_udp_output
++* Handle NAT TCP/UDP output frames
++*----------------------------------------------------------------------*/
++int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port)
++{
++ u32 sip, dip;
++ struct ethhdr *ether_hdr;
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ struct pppoe_hdr *pppoe_hdr;
++ NAT_CB_T *nat_cb;
++ NAT_CFG_T *cfg;
++ u8 proto;
++ u16 sport, dport, ppp_proto;
++ u32 hash_data[HASH_MAX_DWORDS];
++ NAT_HASH_ENTRY_T *hash_entry;
++ int hash_index;
++ struct ip_conntrack *nat_ip_conntrack;
++ enum ip_conntrack_info ctinfo;
++
++ nat_cb = NAT_SKB_CB(skb);
++ cfg = (NAT_CFG_T *)&nat_cfg;
++
++ ether_hdr = (struct ethhdr *)skb->data;
++ ip_hdr = (struct iphdr *)skb->h.ipiph;
++ tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2));
++ sip = ntohl(ip_hdr->saddr);
++ dip = ntohl(ip_hdr->daddr);
++ proto = ip_hdr->protocol;
++ sport = ntohs(tcp_hdr->source);
++ dport = ntohs(tcp_hdr->dest);
++
++#ifdef NAT_DEBUG_MSG
++ {
++ nat_printf("To GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
++ port, ntohs(ip_hdr->id), proto,
++ NIPQUAD(ip_hdr->saddr), sport,
++ NIPQUAD(ip_hdr->daddr), dport);
++ if (proto == IPPROTO_TCP)
++ {
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
++ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
++ }
++ nat_printf("\n");
++ }
++#endif
++ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
++ if (!nat_ip_conntrack)
++ {
++ nat_printf("IP conntrack info is not found!\n");
++ return 0;
++ }
++ // nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo);
++ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
++ if (nat_ip_conntrack->helper)
++ {
++ nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
++ return 0;
++ }
++
++ //if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED))
++ // return 0;
++
++#ifdef NAT_DEBUG_MSG
++ nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state);
++ nat_printf("lan2wan_hash_index=%d, wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index);
++ nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision);
++#endif
++ if (proto == IPPROTO_TCP)
++ {
++ if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE)
++ {
++ if (nat_ip_conntrack->lan2wan_hash_index)
++ {
++#ifdef NAT_DEBUG_MSG
++ nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1);
++#endif
++ hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1);
++ hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1);
++ nat_ip_conntrack->lan2wan_hash_index = 0;
++ }
++ if (nat_ip_conntrack->wan2lan_hash_index)
++ {
++#ifdef NAT_DEBUG_MSG
++ nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1);
++#endif
++ hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1);
++ hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1);
++ nat_ip_conntrack->wan2lan_hash_index = 0;
++ }
++ return 0;
++
++ }
++ else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED)
++ {
++ return 0;
++ }
++ }
++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)))
++ // if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)))
++ return 0;
++
++ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
++ if (port == cfg->wan_port) // LAN-to-WAN
++ {
++ if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision)
++ return 0;
++#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
++ if (!sl351x_nat_find_ipcfg(sip, port))
++ {
++ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
++ return 0;
++ }
++#endif
++ // Note: unused fields (including rule_id) MUST be zero
++ hash_entry->key.Ethertype = 0;
++ hash_entry->key.port_id = cfg->lan_port;
++ hash_entry->key.rule_id = 0;
++ hash_entry->key.ip_protocol = proto;
++ hash_entry->key.reserved1 = 0;
++ hash_entry->key.reserved2 = 0;
++ hash_entry->key.sip = ntohl(nat_cb->sip);
++ hash_entry->key.dip = ntohl(nat_cb->dip);
++ hash_entry->key.sport = nat_cb->sport;
++ hash_entry->key.dport = nat_cb->dport;
++
++ hash_index = nat_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
++ if (hash_get_nat_owner_flag(hash_index))
++ return 0;
++#endif
++ if (hash_get_valid_flag(hash_index))
++ {
++ nat_ip_conntrack->lan2wan_collision = 1;
++ nat_collision++;
++#if 0
++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
++ {
++ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
++ {
++ hash_nat_disable_owner(hash_index);
++ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
++ // nat_printf("Invalidate nat hash entry %d\n", hash_index);
++ }
++ }
++#endif
++ return 0;
++ }
++
++ // write hash entry
++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++ memcpy(hash_entry->param.da, skb->data, 6);
++ memcpy(hash_entry->param.sa, skb->data+6, 6);
++ hash_entry->param.Sip = sip;
++ hash_entry->param.Dip = dip;
++ hash_entry->param.Sport = sport;
++ hash_entry->param.Dport = dport;
++ hash_entry->param.vlan = 0;
++ hash_entry->param.sw_id = 0;
++ hash_entry->param.mtu = 0;
++ // check PPPoE
++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
++ {
++ hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS;
++ hash_entry->param.pppoe = htons(pppoe_hdr->sid);
++ }
++ else
++ {
++ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
++ hash_entry->param.pppoe = 0;
++ }
++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++ hash_entry->tmo.counter = hash_entry->tmo.interval =
++ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
++ nat_write_hash_entry(hash_index, hash_entry);
++ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
++ // hash_dump_entry(hash_index);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++ nat_ip_conntrack->lan2wan_hash_index = hash_index + 1;
++ nat_ip_conntrack->hw_nat |= 1;
++ return 0;
++ }
++ else // WAN-to-LAN
++ {
++ if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision)
++ return 0;
++
++ // Note: unused fields (including rule_id) MUST be zero
++ hash_entry->key.Ethertype = 0;
++ hash_entry->key.port_id = cfg->wan_port;
++ hash_entry->key.rule_id = 0;
++ hash_entry->key.ip_protocol = proto;
++ hash_entry->key.reserved1 = 0;
++ hash_entry->key.reserved2 = 0;
++ hash_entry->key.sip = ntohl(nat_cb->sip);
++ hash_entry->key.dip = ntohl(nat_cb->dip);
++ hash_entry->key.sport = nat_cb->sport;
++ hash_entry->key.dport = nat_cb->dport;
++
++ hash_index = nat_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
++ if (hash_get_nat_owner_flag(hash_index))
++ return 0;
++#endif
++ if (hash_get_valid_flag(hash_index))
++ {
++ nat_ip_conntrack->wan2lan_collision = 1;
++ nat_collision++;
++#if 0
++ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
++ {
++ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
++ {
++ hash_nat_disable_owner(hash_index);
++ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
++ // nat_printf("Invalidate nat hash entry %d\n", hash_index);
++ }
++ }
++#endif
++ return 0;
++ }
++
++ // write hash entry
++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++ memcpy(hash_entry->param.da, skb->data, 6);
++ memcpy(hash_entry->param.sa, skb->data+6, 6);
++ hash_entry->param.Sip = sip;
++ hash_entry->param.Dip = dip;
++ hash_entry->param.Sport = sport;
++ hash_entry->param.Dport = dport;
++ hash_entry->param.vlan = 0;
++ hash_entry->param.pppoe = 0;
++ hash_entry->param.sw_id = 0;
++ hash_entry->param.mtu = 0;
++ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS;
++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
++ hash_entry->tmo.counter = hash_entry->tmo.interval =
++ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
++ nat_write_hash_entry(hash_index, hash_entry);
++
++ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
++ // hash_dump_entry(hash_index);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
++ nat_ip_conntrack->wan2lan_hash_index = hash_index + 1;
++ nat_ip_conntrack->hw_nat |= 2;
++ return 0;
++ }
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* sl351x_nat_gre_output
++* Handle NAT GRE output frames
++*----------------------------------------------------------------------*/
++int sl351x_nat_gre_output(struct sk_buff *skb, int port)
++{
++ u32 sip, dip;
++ struct ethhdr *ether_hdr;
++ struct iphdr *ip_hdr;
++ struct pppoe_hdr *pppoe_hdr;
++ GRE_PKTHDR_T *gre_hdr;
++ NAT_CB_T *nat_cb;
++ NAT_CFG_T *cfg;
++ u16 ppp_proto;
++ u32 hash_data[HASH_MAX_DWORDS];
++ GRE_HASH_ENTRY_T *hash_entry;
++ int hash_index;
++ struct ip_conntrack *nat_ip_conntrack;
++ enum ip_conntrack_info ctinfo;
++
++ nat_cb = NAT_SKB_CB(skb);
++ cfg = (NAT_CFG_T *)&nat_cfg;
++
++ ether_hdr = (struct ethhdr *)skb->data;
++ ip_hdr = (struct iphdr *)skb->h.ipiph;
++ gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2));
++ sip = ntohl(ip_hdr->saddr);
++ dip = ntohl(ip_hdr->daddr);
++
++#ifdef NAT_DEBUG_MSG
++ {
++ nat_printf("To GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
++ port, ntohs(ip_hdr->id),
++ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
++ NIPQUAD(ip_hdr->daddr));
++ nat_printf("\n");
++ }
++#endif
++ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
++ if (nat_ip_conntrack)
++ {
++ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
++ if (nat_ip_conntrack->helper)
++ {
++ nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
++ return 0;
++ }
++ if (!(nat_ip_conntrack->status & IPS_ASSURED))
++ return 0;
++ }
++
++ hash_entry = (GRE_HASH_ENTRY_T *)&hash_data;
++ if (port == cfg->wan_port) // LAN-to-WAN
++ {
++#ifdef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
++ if (!sl351x_nat_find_ipcfg(sip, port))
++ {
++ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
++ return 0;
++ }
++#endif
++ // Note: unused fields (including rule_id) MUST be zero
++ hash_entry->key.Ethertype = 0;
++ hash_entry->key.port_id = cfg->lan_port;
++ hash_entry->key.rule_id = 0;
++ hash_entry->key.ip_protocol = IPPROTO_GRE;
++ hash_entry->key.reserved1 = 0;
++ hash_entry->key.reserved2 = 0;
++ hash_entry->key.reserved3 = 0;
++ hash_entry->key.reserved4 = 0;
++ hash_entry->key.sip = ntohl(nat_cb->sip);
++ hash_entry->key.dip = ntohl(nat_cb->dip);
++ hash_entry->key.protocol = nat_cb->sport;
++ hash_entry->key.call_id = nat_cb->dport;
++
++ hash_index = gre_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
++ if (hash_get_nat_owner_flag(hash_index))
++ return 0;
++#endif
++ if (hash_get_valid_flag(hash_index))
++ {
++ return 0;
++ }
++
++ // write hash entry
++ hash_entry->key.rule_id = cfg->gre_rule_id;
++ memcpy(hash_entry->param.da, skb->data, 6);
++ memcpy(hash_entry->param.sa, skb->data+6, 6);
++ hash_entry->param.Sip = sip;
++ hash_entry->param.Dip = dip;
++ hash_entry->param.Sport = 0;
++ hash_entry->param.Dport = ntohs(gre_hdr->call_id);
++ hash_entry->param.vlan = 0;
++ hash_entry->param.sw_id = 0;
++ hash_entry->param.mtu = 0;
++ // check PPPoE
++ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
++ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
++ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
++ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
++ {
++ hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS;
++ hash_entry->param.pppoe = htons(pppoe_hdr->sid);
++ }
++ else
++ {
++ hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS;
++ hash_entry->param.pppoe = 0;
++ }
++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
++ gre_write_hash_entry(hash_index, hash_entry);
++ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
++ // hash_dump_entry(hash_index);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++ return 0;
++ }
++ else // WAN-to-LAN
++ {
++ // Note: unused fields (including rule_id) MUST be zero
++ hash_entry->key.Ethertype = 0;
++ hash_entry->key.port_id = cfg->wan_port;
++ hash_entry->key.rule_id = 0;
++ hash_entry->key.ip_protocol = IPPROTO_GRE;
++ hash_entry->key.reserved1 = 0;
++ hash_entry->key.reserved2 = 0;
++ hash_entry->key.reserved3 = 0;
++ hash_entry->key.reserved4 = 0;
++ hash_entry->key.sip = ntohl(nat_cb->sip);
++ hash_entry->key.dip = ntohl(nat_cb->dip);
++ hash_entry->key.protocol = nat_cb->sport;
++ hash_entry->key.call_id = nat_cb->dport;
++
++ hash_index = gre_build_keys(&hash_entry->key);
++
++#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
++ if (hash_get_nat_owner_flag(hash_index))
++ return 0;
++#endif
++ if (hash_get_valid_flag(hash_index))
++ {
++ return 0;
++ }
++
++ // write hash entry
++ hash_entry->key.rule_id = cfg->gre_rule_id;
++ memcpy(hash_entry->param.da, skb->data, 6);
++ memcpy(hash_entry->param.sa, skb->data+6, 6);
++ hash_entry->param.Sip = sip;
++ hash_entry->param.Dip = dip;
++ hash_entry->param.Sport = 0;
++ hash_entry->param.Dport = ntohs(gre_hdr->call_id);
++ hash_entry->param.vlan = 0;
++ hash_entry->param.pppoe = 0;
++ hash_entry->param.sw_id = 0;
++ hash_entry->param.mtu = 0;
++ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS;
++ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
++ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
++ gre_write_hash_entry(hash_index, hash_entry);
++
++ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
++ // hash_dump_entry(hash_index);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
++ return 0;
++ }
++ return 0;
++}
++
++
++#ifdef _HAVE_DYNAMIC_PORT_LIST
++/*----------------------------------------------------------------------
++* sl_nat_add_port
++*----------------------------------------------------------------------*/
++void sl_nat_add_port(u8 protocol, u16 port)
++{
++ int i;
++ u16 *port_ptr;
++
++ if (protocol == IPPROTO_TCP)
++ port_ptr = dynamic_tcp_port_list;
++ else if (protocol == IPPROTO_UDP)
++ port_ptr = dynamic_udp_port_list;
++ else
++ return;
++
++ for (i=0; *port_ptr; i++)
++ {
++ if (port == *port_ptr)
++ return;
++ port_ptr++;
++ }
++ port_ptr++;
++ *port_ptr = port;
++}
++
++/*----------------------------------------------------------------------
++* sl_nat_remove_port
++*----------------------------------------------------------------------*/
++void sl_nat_remove_port(u8 protocol, u16 port)
++{
++ int i, j;
++ u16 *port_ptr, *next;
++
++ if (protocol == IPPROTO_TCP)
++ port_ptr = dynamic_tcp_port_list;
++ else if (protocol == IPPROTO_UDP)
++ port_ptr = dynamic_udp_port_list;
++ else
++ return;
++
++ for (i=0; *port_ptr; i++, port_ptr++)
++ {
++ if (port == *port_ptr)
++ {
++ port_next = port_ptr + 1;
++ for (j=i+1; *port_next; i++, j++)
++ *port_ptr++ = *port_next++;
++ *port_ptr = 0;
++ return;
++ }
++ }
++}
++#endif
++
++/*----------------------------------------------------------------------
++* sl351x_nat_ioctl
++*----------------------------------------------------------------------*/
++int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ int i, j, port_id;
++ NATCMD_HDR_T nat_hdr;
++ NAT_REQ_E ctrl;
++ unsigned char *req_datap;
++ NAT_IP_ENTRY_T *ipcfg;
++ NAT_XPORT_ENTRY_T *xport_entry;
++ NAT_WRULE_ENTRY_T *wrule_entry;
++ unsigned int qid;
++
++ if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr)))
++ return -EFAULT;
++ req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr);
++ port_id = tp->port_id;
++ switch (nat_hdr.cmd) {
++ case NATSSTATUS:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_STATUS_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status)))
++ return -EFAULT;
++ if (ctrl.status.enable != 0 && ctrl.status.enable != 1)
++ return -EPERM;
++ // sl351x_nat_set_enabled_flag(ctrl.status.enable);
++ if (nat_cfg.enabled && (ctrl.status.enable == 0))
++ {
++ for (i=0; i<HASH_TOTAL_ENTRIES; i++)
++ {
++ if (hash_get_nat_owner_flag(i))
++ {
++ hash_nat_disable_owner(i);
++ hash_invalidate_entry(i);
++ }
++ }
++ }
++ nat_cfg.enabled = ctrl.status.enable;
++ break;
++ case NATGSTATUS:
++ if (nat_hdr.len != sizeof(NAT_STATUS_T))
++ return -EPERM;
++ ctrl.status.enable = nat_cfg.enabled;
++ if (copy_to_user(req_datap, (void *)&ctrl.status, sizeof(ctrl.status)))
++ return -EFAULT;
++ break;
++ case NATSETPORT:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_PORTCFG_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.portcfg, req_datap, sizeof(ctrl.portcfg)))
++ return -EFAULT;
++ if (ctrl.portcfg.portmap == 0)
++ nat_cfg.lan_port = port_id;
++ else if (ctrl.portcfg.portmap == 1)
++ nat_cfg.wan_port = port_id;
++ else
++ return -EPERM;
++ break;
++ case NATGETPORT:
++ if (nat_hdr.len != sizeof(NAT_PORTCFG_T))
++ return -EPERM;
++ if (nat_cfg.lan_port == port_id)
++ ctrl.portcfg.portmap = 0;
++ else if (nat_cfg.wan_port == port_id)
++ ctrl.portcfg.portmap = 1;
++ else
++ return -EPERM;
++ if (copy_to_user(req_datap, (void *)&ctrl.portcfg, sizeof(ctrl.portcfg)))
++ return -EFAULT;
++ break;
++ case NATADDIP:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_IPCFG_T))
++ return -EPERM;
++ i = nat_cfg.ipcfg[port_id].total;
++ if (i >= CONFIG_NAT_MAX_IP_NUM)
++ return -E2BIG;
++ if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T)))
++ return -EFAULT;
++ nat_cfg.ipcfg[port_id].total++;
++ break;
++ case NATDELIP:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_IPCFG_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg)))
++ return -EFAULT;
++ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0];
++ for (i=0; i<nat_cfg.ipcfg[port_id].total; i++, ipcfg++)
++ {
++ if (ipcfg->ipaddr == ctrl.ipcfg.entry.ipaddr)
++ {
++ NAT_IP_ENTRY_T *ipcfg_next;
++ ipcfg_next = ipcfg + 1;
++ for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++)
++ {
++ memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T));
++ ipcfg++;
++ ipcfg_next++;
++ }
++ ipcfg->ipaddr = 0;
++ ipcfg->netmask = 0;
++ nat_cfg.ipcfg[port_id].total--;
++ return 0;
++ }
++ }
++ return -ENOENT;
++ case NATGETIP:
++ if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T))
++ return -EPERM;
++ if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T)))
++ return -EFAULT;
++ break;
++ case NATAXPORT:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_XPORT_T))
++ return -EPERM;
++ i = nat_cfg.xport.total;
++ if (i >= CONFIG_NAT_MAX_XPORT)
++ return -E2BIG;
++ if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T)))
++ return -EFAULT;
++ nat_cfg.xport.total++;
++ break;
++ case NATDXPORT:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_XPORT_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T)))
++ return -EFAULT;
++ xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0];
++ for (i=0; i<nat_cfg.xport.total; i++, xport_entry++)
++ {
++ if (memcmp((void *)xport_entry, (void *)&ctrl.xport, sizeof(NAT_XPORT_ENTRY_T)) == 0)
++ {
++ NAT_XPORT_ENTRY_T *xport_next;
++ xport_next = xport_entry + 1;
++ for (j=i+1; j < nat_cfg.xport.total; i++, j++)
++ {
++ memcpy((void *)xport_entry, (void *)xport_next, sizeof(NAT_XPORT_ENTRY_T));
++ xport_entry++;
++ xport_next++;
++ }
++ memset((void *)xport_entry, 0, sizeof(NAT_XPORT_ENTRY_T));
++ nat_cfg.xport.total--;
++ return 0;
++ }
++ }
++ return -ENOENT;
++ case NATGXPORT:
++ if (nat_hdr.len != sizeof(NAT_XPORT_ALL_T))
++ return -EPERM;
++ if (copy_to_user(req_datap, (void *)&nat_cfg.xport, sizeof(NAT_XPORT_ALL_T)))
++ return -EFAULT;
++ break;
++ case NATSWEIGHT:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_WEIGHT_T))
++ return -EPERM;
++ if (copy_from_user((void *)&nat_cfg.weight, req_datap, sizeof(NAT_WEIGHT_T)))
++ return -EFAULT;
++ mac_set_hw_tx_weight(dev, (char *)&nat_cfg.weight);
++ break;
++ case NATGWEIGHT:
++ if (nat_hdr.len != sizeof(NAT_WEIGHT_T))
++ return -EPERM;
++ mac_get_hw_tx_weight(dev, (char *)&nat_cfg.weight);
++ if (copy_to_user(req_datap, (void *)&nat_cfg.weight, sizeof(NAT_WEIGHT_T)))
++ return -EFAULT;
++ break;
++ case NATAWRULE:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_WRULE_T))
++ return -EPERM;
++ if (copy_from_user((void *)&qid, req_datap, sizeof(qid)))
++ return -EFAULT;
++ if (qid > CONFIG_NAT_TXQ_NUM)
++ return -EPERM;
++ i = nat_cfg.wrule[qid].total;
++ if (i >= CONFIG_NAT_MAX_WRULE)
++ return -E2BIG;
++ if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T)))
++ return -EFAULT;
++ nat_cfg.wrule[qid].total++;
++ break;
++ case NATDWRULE:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_WRULE_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T)))
++ return -EFAULT;
++ qid = ctrl.wrule.qid;
++ if (qid >= CONFIG_NAT_TXQ_NUM)
++ return -EPERM;
++ wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
++ for (i=0; i<nat_cfg.wrule[qid].total; i++, wrule_entry++)
++ {
++ if (memcmp((void *)wrule_entry, (void *)&ctrl.wrule.entry, sizeof(NAT_WRULE_ENTRY_T)) == 0)
++ {
++ NAT_WRULE_ENTRY_T *wrule_next;
++ wrule_next = wrule_entry + 1;
++ for (j=i+1; j < nat_cfg.wrule[qid].total; i++, j++)
++ {
++ memcpy((void *)wrule_entry, (void *)wrule_next, sizeof(NAT_WRULE_ENTRY_T));
++ wrule_entry++;
++ wrule_next++;
++ }
++ memset((void *)wrule_entry, 0, sizeof(NAT_WRULE_ENTRY_T));
++ nat_cfg.wrule[qid].total--;
++ return 0;
++ }
++ }
++ return -ENOENT;
++ case NATGWRULE:
++ if (nat_hdr.len != sizeof(NAT_WRULE_ALL_T))
++ return -EPERM;
++ if (copy_from_user((void *)&qid, req_datap, sizeof(qid)))
++ return -EFAULT;
++ if (qid >= CONFIG_NAT_TXQ_NUM)
++ return -EPERM;
++ if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T)))
++ return -EFAULT;
++ break;
++ case NATSDEFQ:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_QUEUE_T))
++ return -EPERM;
++ if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32)))
++ return -EFAULT;
++ break;
++ case NATGDEFQ:
++ if (nat_hdr.len != sizeof(NAT_QUEUE_T))
++ return -EPERM;
++ if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32)))
++ return -EFAULT;
++ case NATRMIPCFG:
++ nat_cfg.ipcfg[port_id].total = 0;
++ break;
++ case NATTESTENTRY:
++ if (!capable(CAP_NET_ADMIN))
++ return -EPERM;
++ if (nat_hdr.len != sizeof(NAT_TESTENTRY_T))
++ return -EPERM;
++ if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry)))
++ return -EFAULT;
++ if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1)
++ return -EPERM;
++ nat_cfg.init_enabled = ctrl.init_entry.init_enable;
++ break;
++
++ default:
++ return -EPERM;
++ }
++
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* nat_init_test_entry
++* Initialize NAT test hash entries
++*
++* SmartBits P1 -----> Lepus GMAC 0 --------------+
++* |
++* |
++* P3 <----- Lepus GMAC 1 -- HW TxQ0 <--+
++* -- HW TxQ1 <--+
++* -- HW TxQ2 <--+
++* -- HW TxQ3 <--+
++*
++* SmartBits P1 <----- Lepus GMAC 0 -- HW TxQ0 <--+
++* -- HW TxQ1 <--+
++* -- HW TxQ2 <--+
++* -- HW TxQ3 <--+
++* |
++* |
++* P3 -----> Lepus GMAC 1 --------------+
++*
++* LAN GMAC0 <--------------------------------------------> GMAC1 WAN
++* 192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80
++* 192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80
++* where:
++* [x] : Packet Type
++* [y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3,
++*
++*
++* Packet Type:
++* 1. TCP Frames <---> TCP Frames
++* LAN GMAC0 <--------------------------------> GMAC1 WAN
++* 192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80
++* 192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80
++*
++* 192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80
++* 192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80
++*
++* 192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80
++* 192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80
++*
++* 192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80
++* 192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80
++*
++* 2 TCP Frames <----> PPPoE + TCP Frames
++* LAN GMAC0 <--------------------------------> GMAC1 WAN
++* 192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80
++* 192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80
++*
++* 192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80
++* 192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80
++*
++* 192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80
++* 192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80
++*
++* 192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80
++* 192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80
++*
++* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames
++* LAN GMAC0 <--------------------------------> GMAC1 WAN
++* 192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80
++* 192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80
++*
++* 192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80
++* 192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80
++*
++* 192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80
++* 192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80
++*
++* 192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80
++* 192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80
++*
++* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames
++* LAN GMAC0 <--------------------------------> GMAC1 WAN
++* 192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80
++* 192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80
++*
++* 192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80
++* 192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80
++*
++* 192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80
++* 192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80
++*
++* 192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80
++* 192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80
++*
++*
++*
++*----------------------------------------------------------------------*/
++#ifdef SL351x_NAT_TEST_BY_SMARTBITS
++#define NAT_IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d)
++#define NAT_TEST_CLIENT_IP NAT_IPIV(192,168,1,1)
++#define NAT_TEST_SERVER_IP NAT_IPIV(168,95,1,1)
++#define NAT_TEST_LAN_IP NAT_IPIV(192,168,1,254)
++#define NAT_TEST_WAN_IP NAT_IPIV(192,168,2,254)
++#define NAT_TEST_MAP_PORT_BASE 2001
++#define NAT_TEST_SPORT 50
++#define NAT_TEST_DPORT 80
++#define NAT_TEST_PROTOCOL 6
++u8 nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55};
++u8 nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee};
++u8 nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11};
++u8 nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22};
++static void nat_init_test_entry(void)
++{
++ int i, j ;
++ NAT_HASH_ENTRY_T *hash_entry;
++ u32 sip, dip;
++ u32 hash_data[HASH_MAX_DWORDS];
++ NAT_CFG_T *cfg;
++ int hash_index;
++
++ cfg = (NAT_CFG_T *)&nat_cfg;
++ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
++ hash_entry->key.Ethertype = 0;
++ hash_entry->key.rule_id = 0;
++ hash_entry->key.ip_protocol = IPPROTO_TCP;
++ hash_entry->key.reserved1 = 0;
++ hash_entry->key.reserved2 = 0;
++ // hash_entry->key.sip = NAT_TEST_CLIENT_IP;
++ // hash_entry->key.dip = NAT_TEST_SERVER_IP;
++ hash_entry->key.sport = htons(NAT_TEST_SPORT);
++ hash_entry->key.dport = htons(NAT_TEST_DPORT);
++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
++
++ sip = NAT_TEST_CLIENT_IP;
++ dip = NAT_TEST_SERVER_IP;
++
++ // Init TCP <------> TCP hash entries
++ // LAN --> WAN
++ // (1) TCP --> TCP
++ // (2) TCP --> PPPoE + TCP
++ // (3) TCP --> VLAN-B + PPPoE + TCP
++ // (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP
++ memcpy(hash_entry->param.da, nat_test_wan_target_da, 6);
++ memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6);
++ hash_entry->key.port_id = cfg->lan_port;
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ if (i < 2)
++ {
++ hash_entry->action.bits.dest_qid = i+2;
++ }
++ else
++ {
++ hash_entry->action.bits.dest_qid = i;
++ }
++ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++ hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i;
++ hash_entry->param.Dport = NAT_TEST_DPORT;
++ for (j=0; j<4; j++)
++ {
++ hash_entry->key.sip = sip + i + j*0x100;
++ hash_entry->key.dip = dip + i + j*0x100;
++ hash_entry->param.Dip = hash_entry->key.dip;
++ hash_entry->param.Sip = NAT_TEST_WAN_IP;
++ switch (j)
++ {
++ case 0:
++ hash_entry->action.bits.pppoe = 0;
++ hash_entry->param.pppoe = 0;
++ hash_entry->action.bits.vlan = 0;
++ hash_entry->param.vlan = 0;
++ break;
++ case 1:
++ hash_entry->action.bits.pppoe = 1;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 0;
++ hash_entry->param.vlan = 0;
++ break;
++ case 2:
++ hash_entry->action.bits.pppoe = 1;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 1;
++ hash_entry->param.vlan = i+10;
++ break;
++ case 3:
++ hash_entry->action.bits.pppoe = 1;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 1;
++ hash_entry->param.vlan = i+10;
++ break;
++ }
++ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
++ hash_index = nat_build_keys(&hash_entry->key);
++ nat_write_hash_entry(hash_index, hash_entry);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++ }
++ }
++
++
++ // WAN --> LAN
++ hash_entry->key.port_id = cfg->wan_port;
++ hash_entry->key.sport = htons(NAT_TEST_DPORT);
++ hash_entry->key.dport = htons(NAT_TEST_DPORT);
++ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
++ hash_entry->action.dword = NAT_WAN2LAN_ACTIONS;
++ hash_entry->key.sport = htons(NAT_TEST_DPORT);
++ memcpy(hash_entry->param.da, nat_test_lan_target_da, 6);
++ memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6);
++ for (i=0; i<TOE_HW_TXQ_NUM; i++)
++ {
++ hash_entry->key.dport = htons(NAT_TEST_MAP_PORT_BASE + i);
++ if (i < 2)
++ {
++ hash_entry->action.bits.dest_qid = i+2;
++ }
++ else
++ {
++ hash_entry->action.bits.dest_qid = i;
++ }
++ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
++ hash_entry->param.Dport = NAT_TEST_SPORT;
++ hash_entry->param.Sport = NAT_TEST_DPORT;
++ hash_entry->param.da[5] = i;
++ for (j=0; j<4; j++)
++ {
++ hash_entry->key.sip = (dip + i + j*0x100);
++ hash_entry->key.dip = (NAT_TEST_WAN_IP);
++ hash_entry->param.Sip = hash_entry->key.sip;
++ hash_entry->param.Dip = sip + i + j*0x100;
++ switch (j)
++ {
++ case 0:
++ hash_entry->action.bits.pppoe = 0;
++ hash_entry->param.pppoe = 0;
++ hash_entry->action.bits.vlan = 0;
++ hash_entry->param.vlan = 0;
++ break;
++ case 1:
++ hash_entry->action.bits.pppoe = 2;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 0;
++ hash_entry->param.vlan = 0;
++ break;
++ case 2:
++ hash_entry->action.bits.pppoe = 2;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 2;
++ hash_entry->param.vlan = i+5;
++ break;
++ case 3:
++ hash_entry->action.bits.pppoe = 1;
++ hash_entry->param.pppoe = i+1;
++ hash_entry->action.bits.vlan = 1;
++ hash_entry->param.vlan = i+5;
++ break;
++ }
++ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
++ hash_index = nat_build_keys(&hash_entry->key);
++ nat_write_hash_entry(hash_index, hash_entry);
++ hash_nat_enable_owner(hash_index);
++ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
++ }
++ }
++}
++#endif // SL351x_NAT_TEST_BY_SMARTBITS
++
++#endif // CONFIG_SL351x_NAT
++
+Index: linux-2.6.23.16/drivers/net/sl351x_proc.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_proc.c 2008-03-15 16:59:48.862910740 +0200
+@@ -0,0 +1,578 @@
++/****************************************************************************
++* Copyright 2006 Storlink Corp. All rights reserved.
++*----------------------------------------------------------------------------
++* Name : sl351x_proc.c
++* Description :
++* Handle Proc Routines for Storlink SL351x Platform
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* 04/13/2006 Gary Chen Create and implement
++*
++*
++****************************************************************************/
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/it8712.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/skbuff.h>
++#include <linux/if_ether.h>
++#include <linux/if_pppox.h>
++#include <linux/in.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/ppp_defs.h>
++#ifdef CONFIG_NETFILTER
++#include <linux/netfilter_ipv4/ip_conntrack.h>
++#endif
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/percpu.h>
++#ifdef CONFIG_SYSCTL
++#include <linux/sysctl.h>
++#endif
++
++#define MIDWAY
++#define SL_LEPUS
++
++// #define PROC_DEBUG_MSG 1
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <asm/arch/sl351x_hash_cfg.h>
++#include <asm/arch/sl351x_nat_cfg.h>
++#include <asm/arch/sl351x_toe.h>
++
++#ifdef CONFIG_PROC_FS
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define proc_printf printk
++#define SL351x_GMAC_PROC_NAME "sl351x_gmac"
++#define SL351x_NAT_PROC_NAME "sl351x_nat"
++#define SL351x_TOE_PROC_NAME "sl351x_toe"
++
++/*----------------------------------------------------------------------
++* Function Definition
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int nat_ct_open(struct inode *inode, struct file *file);
++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void nat_ct_seq_stop(struct seq_file *s, void *v);
++static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int nat_ct_seq_show(struct seq_file *s, void *v);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++static int toe_ct_open(struct inode *inode, struct file *file);
++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void toe_ct_seq_stop(struct seq_file *s, void *v);
++static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int toe_ct_seq_show(struct seq_file *s, void *v);
++extern int sl351x_get_toe_conn_flag(int index);
++extern struct toe_conn * sl351x_get_toe_conn_info(int index);
++#endif
++
++static int gmac_ct_open(struct inode *inode, struct file *file);
++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos);
++static void gmac_ct_seq_stop(struct seq_file *s, void *v);
++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
++static int gmac_ct_seq_show(struct seq_file *s, void *v);
++
++
++/*----------------------------------------------------------------------
++* Data
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SYSCTL
++// static struct ctl_table_header *nat_ct_sysctl_header;
++#endif
++
++#ifdef CONFIG_SL351x_NAT
++static struct seq_operations nat_ct_seq_ops = {
++ .start = nat_ct_seq_start,
++ .next = nat_ct_seq_next,
++ .stop = nat_ct_seq_stop,
++ .show = nat_ct_seq_show
++};
++
++static struct file_operations nat_file_ops= {
++ .owner = THIS_MODULE,
++ .open = nat_ct_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = seq_release
++};
++#endif // CONFIG_SL351x_NAT
++
++#ifdef CONFIG_SL351x_RXTOE
++static struct seq_operations toe_ct_seq_ops = {
++ .start = toe_ct_seq_start,
++ .next = toe_ct_seq_next,
++ .stop = toe_ct_seq_stop,
++ .show = toe_ct_seq_show
++};
++
++static struct file_operations toe_file_ops= {
++ .owner = THIS_MODULE,
++ .open = toe_ct_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = seq_release
++};
++#endif
++
++static struct seq_operations gmac_ct_seq_ops = {
++ .start = gmac_ct_seq_start,
++ .next = gmac_ct_seq_next,
++ .stop = gmac_ct_seq_stop,
++ .show = gmac_ct_seq_show
++};
++
++static struct file_operations gmac_file_ops= {
++ .owner = THIS_MODULE,
++ .open = gmac_ct_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
++ .release = seq_release
++};
++
++#ifdef SL351x_GMAC_WORKAROUND
++extern u32 gmac_workaround_cnt[4];
++extern u32 gmac_short_frame_workaround_cnt[2];
++#ifdef CONFIG_SL351x_NAT
++ extern u32 sl351x_nat_workaround_cnt;
++#endif
++#endif
++/*----------------------------------------------------------------------
++* nat_ct_open
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int nat_ct_open(struct inode *inode, struct file *file)
++{
++ return seq_open(file, &nat_ct_seq_ops);
++}
++#endif // CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* nat_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++ int i;
++
++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++)
++ {
++ if (hash_get_nat_owner_flag(i))
++ {
++ *pos = i;
++ return (void *)(i+1);
++ }
++ }
++ return NULL;
++}
++#endif // CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* nat_ct_seq_stop
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void nat_ct_seq_stop(struct seq_file *s, void *v)
++{
++}
++#endif // CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* nat_ct_seq_next
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
++{
++ int i;
++
++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++ (*pos)++;
++ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++)
++ {
++ if (hash_get_nat_owner_flag(i))
++ {
++ *pos = i;
++ return (void *)(i+1);
++ }
++ }
++ return NULL;
++}
++#endif // CONFIG_SL351x_NAT
++/*----------------------------------------------------------------------
++* nat_ct_seq_show
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_NAT
++static int nat_ct_seq_show(struct seq_file *s, void *v)
++{
++ int idx;
++ NAT_HASH_ENTRY_T *nat_entry;
++ GRE_HASH_ENTRY_T *gre_entry;
++
++ idx = (int)v;
++ if (idx<=0 || idx >HASH_TOTAL_ENTRIES)
++ return -ENOSPC;
++
++ idx--;
++ nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx];
++ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
++ if (nat_entry->key.ip_protocol == IPPROTO_GRE)
++ {
++ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n",
++ idx, gre_entry->key.port_id, gre_entry->key.ip_protocol,
++ HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id),
++ HIPQUAD(gre_entry->key.dip)))
++ return -ENOSPC;
++ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n",
++ HIPQUAD(gre_entry->param.Sip),
++ HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport,
++ gre_entry->tmo.counter))
++ return -ENOSPC;
++ }
++ else
++ {
++ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
++ idx, nat_entry->key.port_id, nat_entry->key.ip_protocol,
++ HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport),
++ HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport)))
++ return -ENOSPC;
++ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n",
++ HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport,
++ HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport,
++ nat_entry->tmo.counter))
++ return -ENOSPC;
++ }
++ return 0;
++}
++#endif // CONFIG_SL351x_NAT
++
++/*----------------------------------------------------------------------
++* toe_ct_open
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static int toe_ct_open(struct inode *inode, struct file *file)
++{
++ return seq_open(file, &toe_ct_seq_ops);
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++ int i;
++
++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++)
++ {
++ if (sl351x_get_toe_conn_flag(i))
++ {
++ *pos = i;
++ return (void *)(i+1);
++ }
++ }
++ return NULL;
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_ct_seq_stop
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void toe_ct_seq_stop(struct seq_file *s, void *v)
++{
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_ct_seq_next
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
++{
++ int i;
++
++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++ (*pos)++;
++ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++)
++ {
++ if (sl351x_get_toe_conn_flag(i))
++ {
++ *pos = i;
++ return (void *)(i+1);
++ }
++ }
++ return NULL;
++}
++#endif
++/*----------------------------------------------------------------------
++* toe_ct_seq_show
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_SL351x_RXTOE
++static int toe_ct_seq_show(struct seq_file *s, void *v)
++{
++ int idx;
++ struct toe_conn *toe_entry;
++
++ idx = (int)v;
++ if (idx<=0 || idx >TOE_TOE_QUEUE_NUM)
++ return -ENOSPC;
++
++ idx--;
++ toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx);
++ if (!toe_entry)
++ return -ENOSPC;
++
++ if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
++ idx, toe_entry->qid, toe_entry->gmac->port_id,
++ NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source),
++ NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest)))
++ return -ENOSPC;
++ return 0;
++}
++#endif
++/*----------------------------------------------------------------------
++* gmac_ct_open
++*----------------------------------------------------------------------*/
++static int gmac_ct_open(struct inode *inode, struct file *file)
++{
++ return seq_open(file, &gmac_ct_seq_ops);
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_start
++* find the first
++*----------------------------------------------------------------------*/
++static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos)
++{
++ int i;
++ i = (int)*pos + 1;;
++
++ if (i > 9)
++ return NULL;
++ else
++ return (void *)i;
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_stop
++*----------------------------------------------------------------------*/
++static void gmac_ct_seq_stop(struct seq_file *s, void *v)
++{
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_next
++*----------------------------------------------------------------------*/
++static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
++{
++ int i;
++
++ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
++
++ (*pos)++;
++ i = (int)*pos + 1;;
++
++ if (i > 9)
++ return NULL;
++ else
++ return (void *)i;
++}
++
++/*----------------------------------------------------------------------
++* seq_dm_long
++*----------------------------------------------------------------------*/
++static void seq_dm_long(struct seq_file *s, u32 location, int length)
++{
++ u32 *start_p, *curr_p, *end_p;
++ u32 *datap, data;
++ int i;
++
++ //if (length > 1024)
++ // length = 1024;
++
++ start_p = (u32 *)location;
++ end_p = (u32 *)location + length;
++ curr_p = (u32 *)((u32)location & 0xfffffff0);
++ datap = (u32 *)location;
++ while (curr_p < end_p)
++ {
++ cond_resched();
++ seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0);
++ for (i=0; i<4; i++)
++ {
++ if (curr_p < start_p || curr_p >= end_p)
++ seq_printf(s, " ");
++ else
++ {
++ data = *datap;
++ seq_printf(s, "%08X ", data);
++ }
++ if (i==1)
++ seq_printf(s, "- ");
++
++ curr_p++;
++ datap++;
++ }
++ seq_printf(s, "\n");
++ }
++}
++
++/*----------------------------------------------------------------------
++* gmac_ct_seq_show
++*----------------------------------------------------------------------*/
++static int gmac_ct_seq_show(struct seq_file *s, void *v)
++{
++ switch ((int)v)
++ {
++ case 1:
++ seq_printf(s, "\nGMAC Global Registers\n");
++ seq_dm_long(s, TOE_GLOBAL_BASE, 32);
++ break;
++ case 2:
++ seq_printf(s, "\nGMAC Non-TOE Queue Header\n");
++ seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12);
++ break;
++ case 3:
++ seq_printf(s, "\nGMAC TOE Queue Header\n");
++ seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12);
++ break;
++ case 4:
++ seq_printf(s, "\nGMAC-0 DMA Registers\n");
++ seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52);
++ break;
++ case 5:
++ seq_printf(s, "\nGMAC-0 Registers\n");
++ seq_dm_long(s, TOE_GMAC0_BASE, 32);
++ break;
++ case 6:
++ seq_printf(s, "\nGMAC-1 DMA Registers\n");
++ seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52);
++ break;
++ case 7:
++ seq_printf(s, "\nGMAC-1 Registers\n");
++ seq_dm_long(s, TOE_GMAC1_BASE, 32);
++ break;
++ case 8:
++ seq_printf(s, "\nGLOBAL Registers\n");
++ seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16);
++ break;
++ case 9:
++#ifdef SL351x_GMAC_WORKAROUND
++ seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]);
++ seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]);
++#ifdef CONFIG_SL351x_NAT
++ seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt);
++#endif
++#endif
++ break;
++ default:
++ return -ENOSPC;
++ }
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* init
++*----------------------------------------------------------------------*/
++static int __init init(void)
++{
++ struct proc_dir_entry *proc_gmac=NULL;
++
++#ifdef CONFIG_SL351x_NAT
++ struct proc_dir_entry *proc_nat=NULL;
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++ struct proc_dir_entry *proc_toe=NULL;
++#endif
++
++#ifdef CONFIG_SYSCTL
++ // nat_ct_sysctl_header = NULL;
++#endif
++ proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops);
++ if (!proc_gmac) goto init_bad;
++
++#ifdef CONFIG_SL351x_NAT
++ proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops);
++ if (!proc_nat) goto init_bad;
++#endif // CONFIG_SL351x_NAT
++
++#ifdef CONFIG_SL351x_RXTOE
++ proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops);
++ if (!proc_toe) goto init_bad;
++#endif
++
++#ifdef CONFIG_SYSCTL
++ // nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0);
++ // if (!nat_ct_sysctl_header) goto init_bad;
++#endif
++
++ return 0;
++
++init_bad:
++ if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME);
++
++#ifdef CONFIG_SL351x_NAT
++ if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++ if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SYSCTL
++ // if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header);
++#endif
++ proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n");
++ return -ENOMEM;
++}
++
++/*----------------------------------------------------------------------
++* fini
++*----------------------------------------------------------------------*/
++static void __exit fini(void)
++{
++ proc_net_remove(SL351x_GMAC_PROC_NAME);
++
++#ifdef CONFIG_SL351x_NAT
++ proc_net_remove(SL351x_NAT_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SL351x_RXTOE
++ proc_net_remove(SL351x_TOE_PROC_NAME);
++#endif
++
++#ifdef CONFIG_SYSCTL
++ // unregister_sysctl_table(nat_ct_sysctl_header);
++#endif
++}
++
++/*----------------------------------------------------------------------
++* module
++*----------------------------------------------------------------------*/
++module_init(init);
++module_exit(fini);
++
++#endif // CONFIG_PROC_FS
+Index: linux-2.6.23.16/drivers/net/sl351x_toe.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl351x_toe.c 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,1083 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl351x_toe.c
++* Description :
++* Provide TOE routines for SL351x
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* Xiaochong
++*
++****************************************************************************/
++
++#include <linux/pci.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <linux/tcp.h>
++#include <linux/slab.h>
++#include <linux/etherdevice.h>
++#include <asm/io.h>
++#include <linux/sysctl_storlink.h>
++#include <net/tcp.h>
++#include <linux/if_ether.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <asm/arch/sl351x_toe.h>
++#include <asm/arch/sl351x_hash_cfg.h>
++#include <asm/arch/sl351x_nat_cfg.h>
++
++static int in_toe_isr;
++static int toe_initialized=0;
++
++static struct toe_conn toe_connections[TOE_TOE_QUEUE_NUM];
++EXPORT_SYMBOL(toe_connections);
++static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16)));
++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc);
++
++extern struct storlink_sysctl storlink_ctl;
++extern TOE_INFO_T toe_private_data;
++extern spinlock_t gmac_fq_lock;
++extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
++extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
++extern int hash_add_toe_entry(HASH_ENTRY_T *entry);
++extern void toe_gmac_fill_free_q(void);
++
++#define _DEBUG_SKB_ 1
++#ifdef _DEBUG_SKB_
++/*---------------------------------------------------------------------------
++ * _debug_skb
++ *-------------------------------------------------------------------------*/
++static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data)
++{
++ if ((u32)skb < 0x1000)
++ {
++ printk("%s skb=%x\n", __func__, (u32)skb);
++ while(1);
++ }
++ REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data;
++}
++#else
++#define _debug_skb(x, y, z)
++#endif
++
++/*---------------------------------------------------------------------------
++ * get_connection_seq_num
++ *-------------------------------------------------------------------------*/
++u32 get_connection_seq_num(unsigned short qid)
++{
++ TOE_QHDR_T *toe_qhdr;
++
++ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++ toe_qhdr += qid;
++ return (u32)toe_qhdr->word3.seq_num;
++}
++EXPORT_SYMBOL(get_connection_seq_num);
++
++/*---------------------------------------------------------------------------
++ * get_connection_ack_num
++ *-------------------------------------------------------------------------*/
++u32 get_connection_ack_num(unsigned short qid)
++{
++ TOE_QHDR_T *toe_qhdr;
++
++ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++ toe_qhdr += qid;
++ return (u32)toe_qhdr->word4.ack_num;
++}
++EXPORT_SYMBOL(get_connection_ack_num);
++
++/*---------------------------------------------------------------------------
++ * dump_toe_qhdr
++ *-------------------------------------------------------------------------*/
++void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr)
++{
++ printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32,
++ toe_qhdr->word2.bits32, toe_qhdr->word3.bits32);
++ printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32,
++ toe_qhdr->word5.bits32, toe_qhdr->word6.bits32);
++}
++
++/*---------------------------------------------------------------------------
++ * dump_intrq_desc
++ *-------------------------------------------------------------------------*/
++void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc)
++{
++ printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32,
++ intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32);
++ printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32,
++ intr_curr_desc->word4.bits32);
++}
++
++/*---------------------------------------------------------------------------
++ * This routine will initialize a TOE matching rule
++ * called by SL351x GMAC driver.
++ *-------------------------------------------------------------------------*/
++void sl351x_toe_init(void)
++{
++ GMAC_MRxCR0_T mrxcr0;
++ GMAC_MRxCR1_T mrxcr1;
++ GMAC_MRxCR2_T mrxcr2;
++ int rule, rc;
++
++ if (toe_initialized)
++ return;
++
++ toe_initialized = 1;
++
++#ifndef CONFIG_SL351x_NAT
++ mrxcr0.bits32 = 0;
++ mrxcr1.bits32 = 0;
++ mrxcr2.bits32 = 0;
++ mrxcr0.bits.l3 = 1;
++ mrxcr0.bits.l4 = 1;
++ mrxcr1.bits.sip = 1;
++ mrxcr1.bits.dip = 1;
++ mrxcr1.bits.l4_byte0_15 = 0x0f;
++ mrxcr0.bits.sprx = 1;
++ rule = 0;
++ rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
++ mrxcr2.bits32);
++ if (rc<0) {
++ printk("%s::Set MAC 0 rule fail!\n", __func__);
++ }
++ rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
++ mrxcr2.bits32);
++ if (rc<0) {
++ printk("%s::Set MAC 1 rule fail!\n", __func__);
++ }
++#endif // CONFIG_SL351x_NAT
++}
++
++/*---------------------------------------------------------------------------
++ * dump_intrq_desc
++ * assign an interrupt queue number to a give tcp queue
++ *-------------------------------------------------------------------------*/
++int get_interrupt_queue_id(int tcp_qid)
++{
++ return (int)(tcp_qid & 0x0003);
++}
++
++/*---------------------------------------------------------------------------
++ * reset_connection_index
++ * reset the connection bit by given index
++ *-------------------------------------------------------------------------*/
++void reset_connection_index(__u8 index)
++{
++ __u32 mask = ~(0xffffffff & (1<< (index&0x1f)));
++ toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask;
++}
++
++/*---------------------------------------------------------------------------
++ * update_timer
++ *-------------------------------------------------------------------------*/
++void update_timer(struct toe_conn* connection)
++{
++// if (time_before(jiffies, connection->last_rx_jiffies+3))
++// if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3)
++// if (connection->last_rx_jiffies > jiffies)
++// printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies);
++/* if ((long)(jiffies + 2)< 3) { // overflow...
++ printk("%s::jiffies %x\n", __func__, jiffies);
++ } */
++// if ((long)(jiffies - connection->last_rx_jiffies)< 2)
++// return;
++ connection->last_rx_jiffies = jiffies;
++ // gary chen mod_timer(&connection->rx_timer, jiffies+2);
++ connection->rx_timer.expires = jiffies + 2;
++ add_timer(&connection->rx_timer);
++// printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies);
++}
++
++/*---------------------------------------------------------------------------
++ * gen_pure_ack
++ *-------------------------------------------------------------------------*/
++struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr,
++INTR_QHDR_T *intr_curr_desc)
++{
++ struct sk_buff *skb;
++ struct iphdr *ip_hdr;
++ struct tcphdr *tcp_hdr;
++ struct ethhdr *eth_hdr;
++
++ if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) {
++ printk("%s::alloc pure ack fail!\n", __func__);
++ return NULL;
++ }
++ skb_reserve(skb, RX_INSERT_BYTES);
++ memset(skb->data, 0, 60);
++
++ eth_hdr = (struct ethhdr*)&(skb->data[0]);
++ memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr));
++
++ ip_hdr = (struct iphdr*)&(skb->data[14]);
++ ip_hdr->version = connection->ip_ver;
++ ip_hdr->ihl = 20>>2;
++ ip_hdr->tot_len = ntohs(40);
++ ip_hdr->frag_off = htons(IP_DF);
++ ip_hdr->ttl = 128;
++ ip_hdr->protocol = 0x06;
++ ip_hdr->saddr = connection->saddr[0];
++ ip_hdr->daddr = connection->daddr[0];
++// printk("%s ip sa %x, da %x\n",
++// __func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr));
++
++ tcp_hdr = (struct tcphdr*)&(skb->data[34]);
++ tcp_hdr->source = connection->source;
++ tcp_hdr->dest = connection->dest;
++ if (intr_curr_desc) {
++ tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num);
++ tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num);
++ tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size);
++ } else {
++ tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num);
++ tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num);
++ tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize);
++ }
++ tcp_hdr->ack = 1;
++ tcp_hdr->doff = 20 >> 2;
++#if 0
++ if (!intr_curr_desc) {
++ unsigned char byte;
++ for (i=0; i<20; i++) {
++ byte = skb->data[34+i];
++ printk("%x ", byte);
++ }
++ printk("\n");
++ }
++#endif
++ TCP_SKB_CB(skb)->connection = connection;
++ return skb;
++}
++
++/*---------------------------------------------------------------------------
++ * connection_rx_timer
++ *-------------------------------------------------------------------------*/
++void connection_rx_timer(unsigned long *data)
++{
++ struct toe_conn *connection = (struct toe_conn*)data;
++ unsigned int tcp_qid, toeq_wptr;
++ unsigned int pkt_size, desc_count;
++ struct sk_buff *skb;
++ GMAC_RXDESC_T *toe_curr_desc;
++ TOE_QHDR_T *toe_qhdr;
++ struct net_device *dev;
++ unsigned long conn_flags;
++ DMA_RWPTR_T toeq_rwptr;
++ unsigned short timeout_descs;
++
++ if (in_toe_isr)
++ printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr);
++
++ if (connection) {
++ /* should we disable gmac interrupt first? */
++ if (!connection->gmac)
++ printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac);
++ local_irq_save(conn_flags);
++ if (!spin_trylock(&connection->conn_lock)) {
++ local_irq_restore(conn_flags);
++ // timer should be updated by the toeq isr. So no need to update here.
++ printk("%s::conn_lock is held by ISR!\n", __func__);
++ return;
++ }
++ disable_irq(connection->gmac->irq);
++
++ /* disable hash entry and get toeq desc. */
++ hash_set_valid_flag(connection->hash_entry_index, 0);
++ do{} while(0); /* wait until HW finish */
++
++ dev = connection->dev;
++ if (!dev)
++ printk("%s::conn dev NULL!\n", __func__);
++ tcp_qid = connection->qid;
++ toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE +
++ tcp_qid * sizeof(TOE_QHDR_T));
++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++ toeq_wptr = toe_qhdr->word1.bits.wptr;
++ timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr;
++
++ if (toeq_rwptr.bits.rptr == toeq_wptr) {
++ if (toe_qhdr->word5.bits32) {
++ // shall we check toe_qhdr->word2.bits?
++ skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL);
++ skb_put(skb, 54);
++ skb->dev = connection->dev;
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ skb->protocol = eth_type_trans(skb, connection->dev);
++ netif_rx(skb);
++ connection->dev->last_rx = jiffies;
++ }
++ } else {
++ while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) {
++ /* we just simply send those packets to tcp? */
++ toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid]
++ + toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T));
++ connection->curr_desc = toe_curr_desc;
++ if (toe_curr_desc->word3.bits.ctrl_flag) {
++ printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n",
++ __func__, toe_curr_desc->word3.bits32,
++ connection->toeq_rwptr.bits.rptr, timeout_descs,
++ (u32)jiffies, (u32)connection->last_rx_jiffies);
++ }
++ desc_count = toe_curr_desc->word0.bits.desc_count;
++ pkt_size = toe_curr_desc->word1.bits.byte_count;
++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++ PCI_DMA_FROMDEVICE);
++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++ SKB_RESERVE_BYTES));
++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02);
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, RX_INSERT_BYTES);
++ skb_put(skb, pkt_size);
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ {
++ struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]);
++ if (toe_curr_desc->word3.bits.ctrl_flag)
++ printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id));
++ }
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++ netif_rx(skb);
++ dev->last_rx = jiffies;
++#if 0
++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++ printk("%s::alloc buf fail!\n", __func__);
++ }
++ *(unsigned int*)(skb->data) = (unsigned int)skb;
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES);
++ spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++ mac_stop_txdma((struct net_device*)connection->dev);
++ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++ while(1);
++ }
++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr;
++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++#endif
++// spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++// spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++ }
++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++// toe_gmac_fill_free_q();
++ }
++ connection->last_rx_jiffies = jiffies;
++ if (connection->status != TCP_CONN_CLOSED)
++ mod_timer(&connection->rx_timer, jiffies+2);
++ if (connection->status != TCP_CONN_ESTABLISHED)
++ printk("%s::conn status %x\n", __func__, connection->status);
++ hash_set_valid_flag(connection->hash_entry_index, 1);
++ enable_irq(connection->gmac->irq);
++ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags);
++ }
++}
++
++/*---------------------------------------------------------------------------
++ * free_toeq_descs
++ *-------------------------------------------------------------------------*/
++void free_toeq_descs(int qid, TOE_INFO_T *toe)
++{
++ void *desc_ptr;
++
++ desc_ptr = (void*)toe->toe_desc_base[qid];
++ pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr,
++ (dma_addr_t)toe->toe_desc_base_dma[qid]);
++ toe->toe_desc_base[qid] = 0;
++}
++
++/*---------------------------------------------------------------------------
++ * set_toeq_hdr
++ *-------------------------------------------------------------------------*/
++void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev)
++{
++ volatile TOE_QHDR_T *toe_qhdr;
++ volatile unsigned int toeq_wptr; // toeq_rptr
++ volatile GMAC_RXDESC_T *toe_curr_desc;
++ struct sk_buff *skb;
++ unsigned int pkt_size;
++ DMA_RWPTR_T toeq_rwptr;
++
++ if (connection->status == TCP_CONN_CLOSING) {
++ connection->status = TCP_CONN_CLOSED;
++ hash_set_valid_flag(connection->hash_entry_index, 0);
++ // remove timer first.
++ // del_timer_sync(&(connection->rx_timer));
++ // check if any queued frames last time.
++ toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
++ toe_qhdr += connection->qid;
++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++
++ //toeq_rptr = toe_qhdr->word1.bits.rptr;
++ toeq_wptr = toe_qhdr->word1.bits.wptr;
++ while (toeq_rwptr.bits.rptr != toeq_wptr) {
++ printk("%s::pending frames in TOE Queue before closing!\n", __func__);
++ toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] +
++ toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T));
++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++ pkt_size = toe_curr_desc->word1.bits.byte_count;
++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++ PCI_DMA_FROMDEVICE);
++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
++ SKB_RESERVE_BYTES));
++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03);
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, RX_INSERT_BYTES);
++ skb_put(skb, pkt_size);
++ skb->dev = connection->dev;
++ skb->protocol = eth_type_trans(skb, connection->dev);
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ netif_rx(skb);
++ connection->dev->last_rx = jiffies;
++
++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++ }
++ free_toeq_descs(connection->qid, toe);
++ // shall we re-fill free queue?
++
++ reset_connection_index(connection->qid);
++ //memset(connection, 0, sizeof(struct toe_conn));
++ printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid);
++ return;
++ }
++ /* enable or setup toe queue header */
++ if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) {
++ volatile TOE_QHDR_T *qhdr;
++ int iq_id;
++ connection->status = TCP_CONN_ESTABLISHED;
++ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
++ connection->qid * sizeof(TOE_QHDR_T));
++
++ iq_id = get_interrupt_queue_id(connection->qid);
++ connection->dev = dev;
++ connection->gmac = dev->priv;
++ connection->toeq_rwptr.bits32 = 0;
++
++// qhdr->word6.bits.iq_num = iq_id;
++ qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word.
++ qhdr->word7.bits.AckThreshold = connection->ack_threshold;
++ qhdr->word7.bits.SeqThreshold = connection->seq_threshold;
++
++ // init timer.
++#if 1
++ init_timer(&connection->rx_timer);
++ connection->rx_timer.expires = jiffies + 5;
++ connection->rx_timer.data = (unsigned long)connection;
++ connection->rx_timer.function = (void *)&connection_rx_timer;
++ add_timer(&connection->rx_timer);
++ connection->last_rx_jiffies = jiffies;
++ printk("init_timer %x\n", (u32)jiffies);
++#endif
++ hash_set_valid_flag(connection->hash_entry_index, 1);
++ return;
++ } else {
++ printk("%s::conn status %x, rx_pktsize %d\n",
++ __func__, connection->status, storlink_ctl.rx_max_pktsize);
++ }
++}
++
++/*---------------------------------------------------------------------------
++ * get_connection_index
++ * get_connection_index will find an available index for the connection,
++ * when allocate a new connection is needed.
++ * we find available Qid from AV bits and write to hash_table, so that when RxTOE
++ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q.
++ *-------------------------------------------------------------------------*/
++int get_connection_index(void)
++{
++ int i=0, j=0, index=-1;
++ __u32 connection_bits;
++
++ for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) {
++ connection_bits = ~(toe_connection_bits[i]);
++ if (connection_bits == 0)
++ // all 32 bits are used.
++ continue;
++
++ for (j=0; j<32; j++) {
++ if (connection_bits & 0x01) {
++ index = i*32 + j;
++ return index;
++ }
++ connection_bits = connection_bits >> 1;
++ }
++ }
++ return index;
++}
++
++/*---------------------------------------------------------------------------
++ * set_toe_connection
++ *-------------------------------------------------------------------------*/
++void set_toe_connection(int index, int val)
++{
++ if (val) {
++ toe_connection_bits[index/32] |= (1<<(index%32));
++ } else {
++ toe_connection_bits[index/32] &= (~(1<<(index%32)));
++ }
++}
++
++/*---------------------------------------------------------------------------
++ * sl351x_get_toe_conn_flag
++ *-------------------------------------------------------------------------*/
++int sl351x_get_toe_conn_flag(int index)
++{
++ if (index < TOE_TOE_QUEUE_NUM)
++ return (toe_connection_bits[index/32] & (1 << (index %32)));
++ else
++ return 0;
++}
++
++/*---------------------------------------------------------------------------
++ * sl351x_get_toe_conn_info
++ *-------------------------------------------------------------------------*/
++struct toe_conn * sl351x_get_toe_conn_info(int index)
++{
++ if (index < TOE_TOE_QUEUE_NUM)
++ return (struct toe_conn *)&toe_connections[index];
++ else
++ return NULL;
++}
++
++/*---------------------------------------------------------------------------
++ * create_sw_toe_connection
++ *-------------------------------------------------------------------------*/
++struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr,
++ struct tcphdr* tcp_hdr)
++{
++ struct toe_conn* connection = &(toe_connections[qid]);
++
++ connection->ip_ver = (__u8)ip_ver;
++ connection->qid = (__u8)qid;
++ connection->source = (__u16)tcp_hdr->source;
++ connection->dest = (__u16)tcp_hdr->dest;
++ if (ip_ver == 4) {
++ struct iphdr* iph = (struct iphdr*) ip_hdr;
++ connection->saddr[0] = (__u32)iph->saddr;
++ connection->daddr[0] = (__u32)iph->daddr;
++// printk("%s::saddr %x, daddr %x\n", __func__,
++// ntohl(connection->saddr[0]), ntohl(connection->daddr[0]));
++ } else if (ip_ver == 6) {
++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++ int i=0;
++ for (i=0; i<4; i++) {
++ connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i];
++ connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i];
++ }
++ }
++ connection->status = TCP_CONN_CREATION;
++ return connection;
++}
++
++/*---------------------------------------------------------------------------
++ * fill_toeq_buf
++ *-------------------------------------------------------------------------*/
++int fill_toeq_buf(int index, TOE_INFO_T* toe)
++{
++ volatile TOE_QHDR_T *qhdr;
++ //struct toe_conn* connection;
++ GMAC_RXDESC_T *desc_ptr;
++
++ if (!toe->toe_desc_base[index]) {
++ // first time. init.
++ desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM
++ *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index]));
++
++ toe->toe_desc_num = TOE_TOE_DESC_NUM;
++ toe->toe_desc_base[index] = (unsigned int)desc_ptr;
++ }
++ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
++ index*sizeof(TOE_QHDR_T));
++ //connection = (struct toe_conn*)&(toe_connections[index]);
++
++ qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK)
++ | TOE_TOE_DESC_POWER;
++ qhdr->word1.bits32 = 0;
++ qhdr->word2.bits32 = 0;
++ qhdr->word3.bits32 = 0;
++ qhdr->word4.bits32 = 0;
++ qhdr->word5.bits32 = 0;
++ return 1;
++}
++
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry_smb
++ * add SMB header in hash entry.
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr,
++ int sw_id)
++{
++ HASH_ENTRY_T hash_entry, *entry;
++ int hash_entry_index;
++ int i;
++
++ entry = (HASH_ENTRY_T*)&hash_entry;
++ memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
++ entry->rule = 0;
++
++ /* enable fields of hash key */
++ entry->key_present.ip_protocol = 1;
++ entry->key_present.sip = 1;
++ entry->key_present.dip = 1;
++ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port
++ entry->key_present.l7_bytes_0_3 = 0; // do we need to enable NETBIOS? how?
++ entry->key_present.l7_bytes_4_7 = 1; // "SMB" header
++
++ /* hash key */
++ entry->key.ip_protocol = IPPROTO_TCP;
++ if (ip_ver == 4) {
++ struct iphdr *iph = (struct iphdr*)ip_hdr;
++ memcpy(entry->key.sip, &iph->saddr, 4);
++ memcpy(entry->key.dip, &iph->daddr, 4);
++ } else if (ip_ver == 6) {
++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++ for (i=0; i<4; i++) {
++ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
++ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
++ }
++ }
++ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
++ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
++
++ entry->key.l7_bytes[4] = 0xff;
++ entry->key.l7_bytes[5] = 0x53;
++ entry->key.l7_bytes[6] = 0x4d;
++ entry->key.l7_bytes[7] = 0x42;
++
++ /* action of hash entry match */
++ entry->action.sw_id = 1;
++ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
++ entry->action.srce_qid = 0;
++ hash_entry_index = hash_add_toe_entry(entry);
++
++ return hash_entry_index;
++}
++
++// best performance of tcp streaming.
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry_smb
++ * add SMB header in hash entry.
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr)
++{
++ return 0;
++}
++
++// is hash entry for nfs needed?
++
++/*
++ * Create a TOE hash entry by given ip addresses and tcp port numbers.
++ * hash entry index will be saved in sw connection.
++ */
++/*---------------------------------------------------------------------------
++ * create_toe_hash_entry
++ *-------------------------------------------------------------------------*/
++int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id)
++{
++ HASH_ENTRY_T hash_entry, *entry;
++// unsigned long hash_key[HASH_MAX_DWORDS];
++ int hash_entry_index;
++
++ entry = (HASH_ENTRY_T*) &hash_entry;
++ memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
++ entry->rule = 0;
++ /* enable fields of hash key */
++ entry->key_present.ip_protocol = 1;
++ entry->key_present.sip = 1;
++ entry->key_present.dip = 1;
++ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port
++
++ /* hash key */
++ entry->key.ip_protocol = IPPROTO_TCP;
++ if (ip_ver == 4) {
++ // key of ipv4
++ struct iphdr* iph = (struct iphdr*)ip_hdr;
++ memcpy(entry->key.sip, &iph->saddr, 4);
++ memcpy(entry->key.dip, &iph->daddr, 4);
++ } else if (ip_ver == 6) {
++ // key of ipv6
++ int i=0;
++ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
++ for (i=0; i<4; i++) {
++ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
++ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
++ }
++ }
++ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
++ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
++ // is it necessary to write ip version to hash key?
++
++ /* action of hash entry match */
++ entry->action.sw_id = 1;
++ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
++ entry->action.srce_qid = 0; // 0 for SW FreeQ. 1 for HW FreeQ.
++ hash_entry_index = hash_add_toe_entry(entry);
++// printk("\n%s. sw_id %d, hash_entry index %x\n",
++// __func__, TOE_TOE_QID(sw_id), hash_entry_index);
++ return hash_entry_index;
++}
++
++/*---------------------------------------------------------------------------
++ * init_toeq
++ * 1. Reserve a TOE Queue id first, to get the sw toe_connection.
++ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index
++ * in sw toe_connection.
++ * 3. Prepare sw toe_connection and allocate buffers.
++ * 4. Validate hash entry.
++ *-------------------------------------------------------------------------*/
++struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr,
++ TOE_INFO_T* toe, unsigned char* l2hdr)
++{
++// printk("\t*** %s, ipver %d\n", __func__, ipver);
++ int qid=-1;
++ struct toe_conn* connection;
++ int hash_entry_index;
++ // int i=0;
++ unsigned short dest_port = ntohs(tcp_hdr->dest);
++
++ if (dest_port == 445) {
++ printk("%s::SMB/CIFS connection\n", __func__);
++ } else if (dest_port == 20) {
++ printk("%s::ftp-data connection\n", __func__);
++ } else if (dest_port == 2049) {
++ printk("%s::nfs daemon connection\n", __func__);
++ }
++ qid = get_connection_index();
++ if (qid<0)
++ return 0; // setup toeq failure
++ set_toe_connection(qid, 1); // reserve this sw toeq.
++
++ //connection = (struct toe_conn*)&(toe_connections[qid]);
++ hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid);
++ if (hash_entry_index <0) {
++ printk("%s::release toe hash entry!\n", __func__);
++ set_toe_connection(qid, 0); // release this sw toeq.
++ return 0;
++ }
++ connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr);
++ connection->hash_entry_index = (__u16) hash_entry_index;
++
++ fill_toeq_buf(qid, toe);
++ memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr));
++ spin_lock_init(&connection->conn_lock);
++
++ return connection;
++}
++
++#if 0
++/*----------------------------------------------------------------------
++* toe_init_toe_queue
++* (1) Initialize the TOE Queue Header
++* Register: TOE_TOE_QUE_HDR_BASE (0x60003000)
++* (2) Initialize Descriptors of TOE Queues
++*----------------------------------------------------------------------*/
++void toe_init_toe_queue(TOE_INFO_T* toe)
++{
++}
++EXPORT_SYMBOL(toe_init_toe_queue);
++#endif
++
++/*---------------------------------------------------------------------------
++ * dump_jumbo_skb
++ *-------------------------------------------------------------------------*/
++void dump_jumbo_skb(struct jumbo_frame *jumbo_skb)
++{
++ if (jumbo_skb->skb0) {
++// printk("%s. jumbo skb %x, len %d\n",
++// __func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len);
++ netif_rx(jumbo_skb->skb0);
++ }
++ jumbo_skb->skb0 = 0;
++ jumbo_skb->tail = 0;
++ jumbo_skb->iphdr0 = 0;
++ jumbo_skb->tcphdr0 = 0;
++}
++
++/* ---------------------------------------------------------------------
++ * Append skb to skb0. skb0 is the jumbo frame that will be passed to
++ * kernel tcp.
++ * --------------------------------------------------------------------*/
++void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len)
++{
++ struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]);
++ int ip_hdrlen = iphdr0->ihl << 2;
++ struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]);
++
++ if (!jumbo_skb->skb0) {
++ // head of the jumbo frame.
++ jumbo_skb->skb0 = skb;
++ jumbo_skb->tail = 0;
++ jumbo_skb->iphdr0 = iphdr0;
++ jumbo_skb->tcphdr0 = tcphdr0;
++ } else {
++ if (!jumbo_skb->tail)
++ skb_shinfo(jumbo_skb->skb0)->frag_list = skb;
++ else
++ (jumbo_skb->tail)->next = skb;
++ jumbo_skb->tail = skb;
++
++ // do we need to change truesize as well?
++ jumbo_skb->skb0->len += payload_len;
++ jumbo_skb->skb0->data_len += payload_len;
++
++ jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len);
++ jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq;
++ jumbo_skb->tcphdr0->window = tcphdr0->window;
++
++ skb->len += payload_len;
++ skb->data_len = 0;
++ skb->data += ntohs(iphdr0->tot_len) - payload_len;
++ }
++}
++
++/*----------------------------------------------------------------------
++* toe_gmac_handle_toeq
++* (1) read interrupt Queue to get TOE Q.
++* (2) get packet fro TOE Q and send to upper layer handler.
++* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled.
++*----------------------------------------------------------------------*/
++void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status)
++{
++ //volatile INTRQ_INFO_T *intrq_info;
++ //TOEQ_INFO_T *toeq_info;
++ volatile NONTOE_QHDR_T *intr_qhdr;
++ volatile TOE_QHDR_T *toe_qhdr;
++ volatile INTR_QHDR_T *intr_curr_desc;
++ TOE_INFO_T *toe = &toe_private_data;
++
++ volatile GMAC_RXDESC_T *toe_curr_desc; // , *fq_desc;// *tmp_desc;
++ volatile DMA_RWPTR_T intr_rwptr, toeq_rwptr; // fq_rwptr;
++
++ unsigned int pkt_size, desc_count, tcp_qid;
++ volatile unsigned int toeq_wptr;
++ struct toe_conn* connection;
++ int i, frag_id = 0;
++ // unsigned long toeq_flags;
++ struct jumbo_frame jumbo_skb;
++ struct sk_buff *skb;
++ __u32 interrupt_status;
++
++ in_toe_isr++;
++
++ interrupt_status = status >> 24;
++ // get interrupt queue header
++ intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE;
++ memset(&jumbo_skb, 0, sizeof(struct jumbo_frame));
++
++ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, intr_qhdr++) {
++ if (!(interrupt_status & 0x0001)) {
++ // no interrupt of this IntQ
++ interrupt_status = interrupt_status >> 1;
++ continue;
++ }
++ interrupt_status = interrupt_status >> 1;
++ intr_rwptr.bits32 = readl(&intr_qhdr->word1);
++
++ while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) {
++ int max_pktsize = 1;
++ // get interrupt queue descriptor.
++ intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base +
++ i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr;
++// printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32);
++ // get toeq id
++ tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0);
++ // get toeq queue header
++ toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE;
++ toe_qhdr += tcp_qid;
++ connection = &toe_connections[tcp_qid];
++ del_timer(&connection->rx_timer);
++ // Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags);
++ // handling interrupts of this TOE Q.
++ if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq ||
++ intr_curr_desc->word1.bits.abn)
++ max_pktsize = 0;
++ if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) {
++ desc_count=0;
++ // wptr in intl queue is where this TOE interrupt should stop.
++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++ toeq_wptr = intr_curr_desc->word0.bits.wptr;
++ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
++ printk("conn rptr %d, hw rptr %d\n",
++ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
++
++ if (intr_curr_desc->word1.bits.ctl &&
++ (toeq_rwptr.bits.rptr == toeq_wptr)) {
++ printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n",
++ connection->toeq_rwptr.bits.rptr, toeq_wptr);
++// dump_toe_qhdr(toe_qhdr);
++// dump_intrq_desc(intr_curr_desc);
++ }
++ // while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++ frag_id++;
++ toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid]
++ + toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T));
++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++ desc_count = toe_curr_desc->word0.bits.desc_count;
++ pkt_size = toe_curr_desc->word1.bits.byte_count;
++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++ PCI_DMA_FROMDEVICE);
++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++ SKB_RESERVE_BYTES));
++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01);
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, RX_INSERT_BYTES);
++ if ((skb->len + pkt_size) > (1514+16))
++ {
++ printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size);
++ while(1);
++ }
++
++ skb_put(skb, pkt_size);
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++
++ if (toe_curr_desc->word3.bits32 & 0x1b000000)
++ dump_jumbo_skb(&jumbo_skb);
++
++ rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset);
++// spin_lock_irqsave(&gmac_fq_lock, flags);
++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++// spin_unlock_irqrestore(&gmac_fq_lock, flags);
++ if (storlink_ctl.fqint_threshold)
++ continue;
++#if 0
++//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL)
++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++ printk("%s::toe queue alloc buffer ", __func__);
++ }
++ *(unsigned int*)(skb->data) = (unsigned int)skb;
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES);
++
++ spin_lock_irqsave(&gmac_fq_lock, flags);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
++ mac_stop_txdma((struct net_device*) tp->dev);
++ spin_unlock_irqrestore(&gmac_fq_lock, flags);
++ while(1);
++ }
++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++
++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++ spin_unlock_irqrestore(&gmac_fq_lock, flags);
++#endif
++ } // end of this multi-desc.
++ dump_jumbo_skb(&jumbo_skb);
++ dev->last_rx = jiffies;
++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++ } else if (intr_curr_desc->word1.bits.sat) {
++ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
++ toeq_wptr = intr_curr_desc->word0.bits.wptr;
++ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
++ printk("SAT. conn rptr %d, hw rptr %d\n",
++ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
++/*
++ printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n",
++ __func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt,
++ toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/
++ /* pure ack */
++ if (toeq_rwptr.bits.rptr == toeq_wptr) {
++ if (intr_curr_desc->word4.bits32) {
++ skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc);
++ skb_put(skb, 60);
++ skb->dev = connection->dev;
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ skb->protocol = eth_type_trans(skb, connection->dev);
++ netif_rx(skb);
++ } else
++ printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__);
++ } else {
++ // while (toeq_rwptr.bits.rptr != toeq_wptr) {
++ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
++ toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid]
++ + toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T));
++ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
++ desc_count = toe_curr_desc->word0.bits.desc_count;
++ pkt_size = toe_curr_desc->word1.bits.byte_count;
++ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
++ PCI_DMA_FROMDEVICE);
++ // if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) {
++ if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) {
++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
++ SKB_RESERVE_BYTES));
++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04);
++ connection->curr_rx_skb = skb;
++ skb_reserve(skb, RX_INSERT_BYTES);
++ skb_put(skb, pkt_size);
++ skb->dev = dev;
++ skb->protocol = eth_type_trans(skb, dev);
++ skb->ip_summed = CHECKSUM_UNNECESSARY;
++ // printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr);
++ netif_rx(skb);
++ dev->last_rx = jiffies;
++/*
++ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
++
++ }
++ *(unsigned int*)(skb->data) = (unsigned int) skb;
++ skb_reserve(skb, SKB_RESERVE_BYTES); */
++ } else {
++ // reuse this skb, append to free queue..
++ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
++ SKB_RESERVE_BYTES));
++ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05);
++ connection->curr_rx_skb = skb;
++ dev_kfree_skb_irq(skb);
++ }
++#if 0
++ spin_lock_irqsave(&gmac_fq_lock, flags);
++ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++/* if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
++ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
++ mac_stop_txdma((struct net_device*) tp->dev);
++ spin_unlock_irqrestore(&gmac_fq_lock, flags);
++ while(1);
++ } */
++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
++ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
++
++ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
++ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
++ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
++#endif
++// spin_lock_irqsave(&gmac_fq_lock, flags);
++ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
++ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
++// spin_unlock_irqrestore(&gmac_fq_lock, flags);
++ }
++ } // end of ACK with options.
++ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
++ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags);
++// }
++ };
++ update_timer(connection);
++ // any protection against interrupt queue header?
++ intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM);
++ SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr);
++ intr_rwptr.bits32 = readl(&intr_qhdr->word1);
++ toe_gmac_fill_free_q();
++ } // end of this interrupt Queue processing.
++ } // end of all interrupt Queues.
++
++ in_toe_isr = 0;
++}
++
++
+Index: linux-2.6.23.16/drivers/net/sl_lepus_hash.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl_lepus_hash.c 2008-03-15 16:59:57.863423587 +0200
+@@ -0,0 +1,553 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl_lepus_hash.c
++* Description :
++* Handle Storlink Lepus Hash Functions
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* 03/13/2006 Gary Chen Create and implement
++*
++****************************************************************************/
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/compiler.h>
++#include <linux/pci.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/delay.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/completion.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/semaphore.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/it8712.h>
++#include <linux/mtd/kvctl.h>
++#include <linux/skbuff.h>
++#include <linux/ip.h>
++#include <linux/tcp.h>
++#include <linux/list.h>
++#define MIDWAY
++#define SL_LEPUS
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/sl_lepus_gmac.h>
++#include <asm/arch/sl_hash_cfg.h>
++
++#ifndef RXTOE_DEBUG
++#define RXTOE_DEBUG
++#endif
++#undef RXTOE_DEBUG
++
++/*----------------------------------------------------------------------
++* Definition
++*----------------------------------------------------------------------*/
++#define hash_printf printk
++
++#define HASH_TIMER_PERIOD (60*HZ) // seconds
++#define HASH_ILLEGAL_INDEX 0xffff
++
++/*----------------------------------------------------------------------
++* Variables
++*----------------------------------------------------------------------*/
++u32 hash_activate_bits[HASH_TOTAL_ENTRIES/32];
++u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++static struct timer_list hash_timer_obj;
++LIST_HEAD(hash_timeout_list);
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length);
++static void hash_timer_func(u32 data);
++
++/*----------------------------------------------------------------------
++* hash_init
++*----------------------------------------------------------------------*/
++void hash_init(void)
++{
++ int i;
++ volatile u32 *dp1, *dp2, dword;
++
++ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
++ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
++
++ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
++ {
++ *dp1++ = 0;
++ dword = *dp2++; // read-clear
++ }
++ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits));
++ memset((void *)&hash_tables, 0, sizeof(hash_tables));
++
++ init_timer(&hash_timer_obj);
++ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
++ hash_timer_obj.data = (unsigned long)&hash_timer_obj;
++ hash_timer_obj.function = (void *)&hash_timer_func;
++ add_timer(&hash_timer_obj);
++
++#if (HASH_MAX_BYTES == 128)
++ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words
++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
++#elif (HASH_MAX_BYTES == 64)
++ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words
++ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
++#else
++ #error Incorrect setting for HASH_MAX_BYTES
++#endif
++
++}
++/*----------------------------------------------------------------------
++* hash_add_entry
++*----------------------------------------------------------------------*/
++int hash_add_entry(HASH_ENTRY_T *entry)
++{
++ int rc;
++ u32 key[HASH_MAX_DWORDS];
++ rc = hash_build_keys((u32 *)&key, entry);
++ if (rc < 0)
++ return -1;
++ hash_write_entry(entry, (unsigned char*) &key[0]);
++// hash_set_valid_flag(entry->index, 1);
++// printk("Dump hash key!\n");
++// dump_hash_key(entry);
++ return entry->index;
++}
++
++/*----------------------------------------------------------------------
++* hash_set_valid_flag
++*----------------------------------------------------------------------*/
++void hash_set_valid_flag(int index, int valid)
++{
++ register u32 reg32;
++
++ reg32 = TOE_V_BIT_BASE + (index/32) * 4;
++
++ if (valid)
++ {
++ writel(readl(reg32) | (1 << (index%32)), reg32);
++ }
++ else
++ {
++ writel(readl(reg32) & ~(1 << (index%32)), reg32);
++ }
++}
++
++/*----------------------------------------------------------------------
++* hash_set_nat_owner_flag
++*----------------------------------------------------------------------*/
++void hash_set_nat_owner_flag(int index, int valid)
++{
++ if (valid)
++ {
++ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++ }
++ else
++ {
++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++ }
++}
++
++
++/*----------------------------------------------------------------------
++* hash_build_keys
++*----------------------------------------------------------------------*/
++int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++ u32 data;
++ unsigned char *cp;
++ int i, j;
++ unsigned short index;
++ int total;
++
++ memset((void *)destp, 0, HASH_MAX_BYTES);
++ cp = (unsigned char *)destp;
++
++ if (entry->key_present.port || entry->key_present.Ethertype)
++ {
++ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0
++ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2
++ HASH_PUSH_BYTE(cp, 0); // Byte 3
++ }
++ else
++ {
++ HASH_PUSH_DWORD(cp, 0);
++ }
++
++ if (entry->key_present.da || entry->key_present.sa)
++ {
++ unsigned char mac[4];
++ if (entry->key_present.da)
++ {
++ for (i=0; i<4; i++)
++ HASH_PUSH_BYTE(cp, entry->key.da[i]);
++ }
++ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
++ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
++ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
++ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
++ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
++ HASH_PUSH_DWORD(cp, data);
++ if (entry->key_present.sa)
++ {
++ for (i=2; i<6; i++)
++ HASH_PUSH_BYTE(cp, entry->key.sa[i]);
++ }
++ }
++
++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++ {
++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
++ }
++ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0
++ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1
++ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2
++ HASH_PUSH_BYTE(cp, 0); // Byte 3
++ }
++
++ if (entry->key_present.ipv6_flow_label)
++ {
++ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word
++ }
++ if (entry->key_present.sip)
++ {
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++ if (entry->key.ipv6)
++ {
++ for (i=4; i<16; i+=4)
++ {
++ for (j=i+3; j>=i; j--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[j]);
++ }
++ }
++ }
++ if (entry->key_present.dip)
++ {
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++ if (entry->key.ipv6)
++ {
++ for (i=4; i<16; i+=4)
++ {
++ for (j=i+3; j>=i; j--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[j]);
++ }
++ }
++ }
++
++ if (entry->key_present.l4_bytes_0_3)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++ }
++ if (entry->key_present.l4_bytes_4_7)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
++ }
++ if (entry->key_present.l4_bytes_8_11)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
++ }
++ if (entry->key_present.l4_bytes_12_15)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
++ }
++ if (entry->key_present.l4_bytes_16_19)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
++ }
++ if (entry->key_present.l4_bytes_20_23)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
++ }
++ if (entry->key_present.l7_bytes_0_3)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
++ }
++ if (entry->key_present.l7_bytes_4_7)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
++ }
++ if (entry->key_present.l7_bytes_8_11)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
++ }
++ if (entry->key_present.l7_bytes_12_15)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
++ }
++ if (entry->key_present.l7_bytes_16_19)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
++ }
++ if (entry->key_present.l7_bytes_20_23)
++ {
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
++ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
++ }
++
++ // get hash index
++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++ if (total > HASH_MAX_KEY_DWORD)
++ {
++ //hash_printf("Total key words (%d) is too large (> %d)!\n",
++ // total, HASH_MAX_KEY_DWORD);
++ return -1;
++ }
++
++ if (entry->key_present.port || entry->key_present.Ethertype)
++ index = hash_gen_crc16((unsigned char *)destp, total * 4);
++ else
++ {
++ if (total == 1)
++ {
++ hash_printf("No key is assigned!\n");
++ return -1;
++ }
++
++ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
++ }
++
++ entry->index = index & HASH_BITS_MASK;
++
++ //hash_printf("Total key words = %d, Hash Index= %d\n",
++ // total, entry->index);
++
++ cp = (unsigned char *)destp;
++ cp+=3;
++ HASH_PUSH_BYTE(cp, entry->rule); // rule
++
++ entry->total_dwords = total;
++
++ return total;
++}
++
++/*----------------------------------------------------------------------
++* hash_build_nat_keys
++*----------------------------------------------------------------------*/
++void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
++{
++ unsigned char *cp;
++ int i;
++ unsigned short index;
++ int total;
++
++ memset((void *)destp, 0, HASH_MAX_BYTES);
++
++ cp = (unsigned char *)destp + 2;
++ HASH_PUSH_BYTE(cp, entry->key.port);
++ cp++;
++
++ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
++ {
++ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
++ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
++ }
++
++ HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
++ cp+=3;
++
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
++
++ // input (entry->key.sip[i]) is network-oriented
++ // output (hash key) is host-oriented
++ for (i=3; i>=0; i--)
++ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
++
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
++ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
++
++ // get hash index
++ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
++
++ index = hash_gen_crc16((unsigned char *)destp, total * 4);
++ entry->index = index & ((1 << HASH_BITS) - 1);
++
++ cp = (unsigned char *)destp;
++ cp+=3;
++ HASH_PUSH_BYTE(cp, entry->rule); // rule
++
++ entry->total_dwords = total;
++}
++
++
++/*----------------------------------------------------------------------
++* hash_write_entry
++*----------------------------------------------------------------------*/
++int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
++{
++ int i;
++ u32 *srcep, *destp, *destp2;
++
++ srcep = (u32 *)key;
++ destp2 = destp = (u32 *)&hash_tables[entry->index][0];
++
++ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
++ *destp = *srcep;
++
++ srcep = (u32 *)&entry->action;
++ *destp++ = *srcep;
++
++ srcep = (u32 *)&entry->param;
++ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
++ *destp = *srcep;
++
++ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
++
++ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
++ return 0;
++}
++
++/*----------------------------------------------------------------------
++* hash_timer_func
++*----------------------------------------------------------------------*/
++static void hash_timer_func(u32 data)
++{
++ int i, j;
++ volatile u32 *active_p, *own_p, *valid_p;
++ u32 a_bits, own_bits;
++
++ valid_p = (volatile u32 *)TOE_V_BIT_BASE;
++ active_p = (volatile u32 *)hash_activate_bits;
++ own_p = (volatile u32 *)hash_nat_owner_bits;
++ for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++)
++ {
++ *active_p |= readl(TOE_A_BIT_BASE + (i*4));
++ a_bits = *active_p;
++ own_bits = *own_p;
++ if (own_bits)
++ {
++#ifndef DEBUG_NAT_MIXED_HW_SW_TX
++ a_bits = own_bits & ~a_bits;
++#else
++ a_bits = own_bits & a_bits;
++#endif
++ for (j=0; a_bits && j<32; j++)
++ {
++ if (a_bits & 1)
++ {
++ *valid_p &= ~(1 << j); // invalidate it
++#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT))
++ *own_p &= ~(1 << j); // release ownership for NAT
++#endif
++// #ifdef DEBUG_NAT_MIXED_HW_SW_TX
++#if 0
++ hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
++#endif
++ }
++ a_bits >>= 1;
++ }
++ *active_p &= ~own_bits; // deactivate it for next polling
++ }
++ }
++
++ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
++ add_timer((struct timer_list *)data);
++}
++
++/*----------------------------------------------------------------------
++* dm_long
++*----------------------------------------------------------------------*/
++void dm_long(u32 location, int length)
++{
++ u32 *start_p, *curr_p, *end_p;
++ u32 *datap, data;
++ int i;
++
++ //if (length > 1024)
++ // length = 1024;
++
++ start_p = (u32 *)location;
++ end_p = (u32 *)location + length;
++ curr_p = (u32 *)((u32)location & 0xfffffff0);
++ datap = (u32 *)location;
++ while (curr_p < end_p)
++ {
++ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
++ for (i=0; i<4; i++)
++ {
++ if (curr_p < start_p || curr_p >= end_p)
++ hash_printf(" ");
++ else
++ {
++ data = *datap;
++ hash_printf("%08X ", data);
++ }
++ if (i==1)
++ hash_printf("- ");
++
++ curr_p++;
++ datap++;
++ }
++ hash_printf("\n");
++ }
++}
++
++/*----------------------------------------------------------------------
++* hash_dump_entry
++*----------------------------------------------------------------------*/
++void hash_dump_entry(int index)
++{
++ hash_printf("Hash Index %d:\n", index);
++ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
++}
++
++
+Index: linux-2.6.23.16/drivers/net/sl_switch.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/net/sl_switch.c 2008-03-15 17:00:08.364022040 +0200
+@@ -0,0 +1,650 @@
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/delay.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++
++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0c,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++};
++
++#define GMAC_SPEED_10 0
++#define GMAC_SPEED_100 1
++#define GMAC_SPEED_1000 2
++
++enum phy_state
++{
++ LINK_DOWN = 0,
++ LINK_UP = 1
++};
++
++#ifndef BIT
++#define BIT(x) (1 << (x))
++#endif
++
++//int Get_Set_port_status();
++unsigned int SPI_read_bit(void);
++void SPI_write_bit(char bit_EEDO);
++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value);
++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr);
++int SPI_default(void);
++void SPI_CS_enable(unsigned char enable);
++unsigned int SPI_get_identifier(void);
++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val);
++unsigned int phy_read(unsigned char port_no,unsigned char reg);
++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask);
++void init_seq_7385(unsigned char port_no) ;
++void phy_receiver_init (unsigned char port_no);
++
++#define PORT_NO 4
++int switch_pre_speed[PORT_NO]={0,0,0,0};
++int switch_pre_link[PORT_NO]={0,0,0,0};
++
++
++
++
++
++/* NOTES
++ * The Protocol of the SPI are as follows:
++ *
++ * Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
++ * byte0 | Block id | r/w | sub-block |
++ * byte1 | Address |
++ * byte2 | Data |
++ * byte3 | Data |
++ * byte4 | Data |
++ * byte5 | Data |
++ */
++
++
++
++
++/***************************************/
++/* define GPIO module base address */
++/***************************************/
++#define GPIO_EECS 0x80000000 /* EECS: GPIO[22] */
++#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/
++#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/
++#define GPIO_EECK 0x10000000 /* EECK: GPIO[31] */
++
++/*************************************************************
++* SPI protocol for ADM6996 control
++**************************************************************/
++#define SPI_OP_LEN 0x08 // the length of start bit and opcode
++#define SPI_OPWRITE 0X05 // write
++#define SPI_OPREAD 0X06 // read
++#define SPI_OPERASE 0X07 // erase
++#define SPI_OPWTEN 0X04 // write enable
++#define SPI_OPWTDIS 0X04 // write disable
++#define SPI_OPERSALL 0X04 // erase all
++#define SPI_OPWTALL 0X04 // write all
++
++#define SPI_ADD_LEN 8 // bits of Address
++#define SPI_DAT_LEN 32 // bits of Data
++
++
++/****************************************/
++/* Function Declare */
++/****************************************/
++
++//unsigned int SPI_read_bit(void);
++//void SPI_write_bit(char bit_EEDO);
++//unsigned int SPI_read_bit(void);
++/******************************************
++* SPI_write
++* addr -> Write Address
++* value -> value to be write
++***************************************** */
++void phy_receiver_init (unsigned char port_no)
++{
++ phy_write(port_no,31,0x2a30);
++ phy_write_masked(port_no, 12, 0x0200, 0x0300);
++ phy_write(port_no,31,0);
++}
++
++void phy_write(unsigned char port_no,unsigned char reg,unsigned int val)
++{
++ unsigned int cmd;
++
++ cmd = (port_no<<21)|(reg<<16)|val;
++ SPI_write(3,0,1,cmd);
++}
++
++unsigned int phy_read(unsigned char port_no,unsigned char reg)
++{
++ unsigned int cmd,reg_val;
++
++ cmd = BIT(26)|(port_no<<21)|(reg<<16);
++ SPI_write(3,0,1,cmd);
++ msleep(2);
++ reg_val = SPI_read(3,0,2);
++ return reg_val;
++}
++
++void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask)
++{
++ unsigned int cmd,reg_val;
++
++ cmd = BIT(26)|(port_no<<21)|(reg<<16); // Read reg_val
++ SPI_write(3,0,1,cmd);
++ mdelay(2);
++ reg_val = SPI_read(3,0,2);
++ reg_val &= ~mask; // Clear masked bit
++ reg_val |= (val&mask) ; // set masked bit ,if true
++ cmd = (port_no<<21)|(reg<<16)|reg_val;
++ SPI_write(3,0,1,cmd);
++}
++
++void init_seq_7385(unsigned char port_no)
++{
++ unsigned char rev;
++
++ phy_write(port_no, 31, 0x2a30);
++ phy_write_masked(port_no, 8, 0x0200, 0x0200);
++ phy_write(port_no, 31, 0x52b5);
++ phy_write(port_no, 16, 0xb68a);
++ phy_write_masked(port_no, 18, 0x0003, 0xff07);
++ phy_write_masked(port_no, 17, 0x00a2, 0x00ff);
++ phy_write(port_no, 16, 0x968a);
++ phy_write(port_no, 31, 0x2a30);
++ phy_write_masked(port_no, 8, 0x0000, 0x0200);
++ phy_write(port_no, 31, 0x0000); /* Read revision */
++ rev = phy_read(port_no, 3) & 0x000f;
++ if (rev == 0)
++ {
++ phy_write(port_no, 31, 0x2a30);
++ phy_write_masked(port_no, 8, 0x0200, 0x0200);
++ phy_write(port_no, 31, 0x52b5);
++ phy_write(port_no, 18, 0x0000);
++ phy_write(port_no, 17, 0x0689);
++ phy_write(port_no, 16, 0x8f92);
++ phy_write(port_no, 31, 0x52B5);
++ phy_write(port_no, 18, 0x0000);
++ phy_write(port_no, 17, 0x0E35);
++ phy_write(port_no, 16, 0x9786);
++ phy_write(port_no, 31, 0x2a30);
++ phy_write_masked(port_no, 8, 0x0000, 0x0200);
++ phy_write(port_no, 23, 0xFF80);
++ phy_write(port_no, 23, 0x0000);
++ }
++ phy_write(port_no, 31, 0x0000);
++ phy_write(port_no, 18, 0x0048);
++ if (rev == 0)
++ {
++ phy_write(port_no, 31, 0x2a30);
++ phy_write(port_no, 20, 0x6600);
++ phy_write(port_no, 31, 0x0000);
++ phy_write(port_no, 24, 0xa24e);
++ }
++ else
++ {
++ phy_write(port_no, 31, 0x2a30);
++ phy_write_masked(port_no, 22, 0x0240, 0x0fc0);
++ phy_write_masked(port_no, 20, 0x4000, 0x6000);
++ phy_write(port_no, 31, 1);
++ phy_write_masked(port_no, 20, 0x6000, 0xe000);
++ phy_write(port_no, 31, 0x0000);
++ }
++}
++
++int Get_Set_port_status()
++{
++ unsigned int reg_val,ability,rcv_mask,mac_config;
++ int is_link=0;
++ int i;
++
++ rcv_mask = SPI_read(2,0,0x10); // Receive mask
++
++ for(i=0;i<4;i++){
++ reg_val = phy_read(i,1);
++ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
++ {
++ is_link=1;
++ if(switch_pre_link[i]==LINK_DOWN){ // Link Down ==> Link up
++
++ rcv_mask |= BIT(i); // Enable receive
++
++ reg_val = phy_read(i,10);
++ if(reg_val & 0x0c00){
++ printk("Port%d:Giga mode\n",i);
++// SPI_write(1,i,0x00,0x300701B1);
++ mac_config = 0x00060004|(6<<6);
++
++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
++ mac_config |= (( BIT(i) << 19) | 0x08000000);
++ SPI_write(1,i,0x00,mac_config);
++ SPI_write(1,i,0x04,0x000300ff); // flow control
++
++ reg_val = SPI_read(5,0,0x12);
++ reg_val &= ~BIT(i);
++ SPI_write(5,0,0x12,reg_val);
++
++ reg_val = SPI_read(1,i,0x00);
++ reg_val |= 0x10010000;
++ SPI_write(1,i,0x00,reg_val);
++// SPI_write(1,i,0x00,0x10070181);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_1000;
++ }
++ else{
++ reg_val = phy_read(i,5);
++ ability = (reg_val&0x5e0) >>5;
++ if ((ability & 0x0C)) /* 100M */
++ {
++// SPI_write(1,i,0x00,0x30050472);
++ if((ability&0x08)==0) // Half
++ mac_config = 0x00040004 |(17<<6);
++ else // Full
++ mac_config = 0x00040004 |(17<<6);
++
++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
++ mac_config |= (( BIT(i) << 19) | 0x08000000);
++ SPI_write(1,i,0x00,mac_config);
++ SPI_write(1,i,0x04,0x000300ff); // flow control
++
++ reg_val = SPI_read(5,0,0x12);
++ reg_val &= ~BIT(i);
++ SPI_write(5,0,0x12,reg_val);
++
++ reg_val = SPI_read(1,i,0x00);
++ reg_val &= ~0x08000000;
++ reg_val |= 0x10010000;
++ SPI_write(1,i,0x00,reg_val);
++// SPI_write(1,i,0x00,0x10050442);
++ printk("Port%d:100M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_100;
++ }
++ else if((ability & 0x03)) /* 10M */
++ {
++// SPI_write(1,i,0x00,0x30050473);
++ if((ability&0x2)==0) // Half
++ mac_config = 0x00040004 |(17<<6);
++ else // Full
++ mac_config = 0x00040004 |(17<<6);
++
++ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
++ mac_config |= (( BIT(i) << 19) | 0x08000000);
++ SPI_write(1,i,0x00,mac_config);
++ SPI_write(1,i,0x04,0x000300ff); // flow control
++
++ reg_val = SPI_read(5,0,0x12);
++ reg_val &= ~BIT(i);
++ SPI_write(5,0,0x12,reg_val);
++
++ reg_val = SPI_read(1,i,0x00);
++ reg_val &= ~0x08000000;
++ reg_val |= 0x10010000;
++ SPI_write(1,i,0x00,reg_val);
++// SPI_write(1,i,0x00,0x10050443);
++ printk("Port%d:10M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ }
++ else{
++ SPI_write(1,i,0x00,0x20000030);
++ printk("Port%d:Unknown mode\n",i);
++ switch_pre_link[i]=LINK_DOWN;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ }
++ }
++ }
++ else{ // Link up ==> Link UP
++
++ }
++ }
++ else{ // Link Down
++ if(switch_pre_link[i]==LINK_UP){
++ printk("Port%d:Link Down\n",i);
++ //phy_receiver_init(i);
++ reg_val = SPI_read(1,i,0);
++ reg_val &= ~BIT(16);
++ SPI_write(1,i,0x00,reg_val); // disable RX
++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
++ msleep(1);
++ SPI_write(1,i,0x00,0x20000030); // PORT_RST
++ SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet
++
++ reg_val = SPI_read(5,0,0x12);
++ reg_val |= BIT(i);
++ SPI_write(5,0,0x12,reg_val);
++ }
++ switch_pre_link[i]=LINK_DOWN;
++ rcv_mask &= ~BIT(i); // disable receive
++ }
++ }
++
++ SPI_write(2,0,0x10,rcv_mask); // Receive mask
++ return is_link;
++
++}
++EXPORT_SYMBOL(Get_Set_port_status);
++
++void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value)
++{
++ int i;
++ char bit;
++ unsigned int data;
++
++ SPI_CS_enable(1);
++
++ data = (block<<5) | 0x10 | subblock;
++
++ //send write command
++ for(i=SPI_OP_LEN-1;i>=0;i--)
++ {
++ bit = (data>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++
++ // send 8 bits address (MSB first, LSB last)
++ for(i=SPI_ADD_LEN-1;i>=0;i--)
++ {
++ bit = (addr>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++ // send 32 bits data (MSB first, LSB last)
++ for(i=SPI_DAT_LEN-1;i>=0;i--)
++ {
++ bit = (value>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++
++ SPI_CS_enable(0); // CS low
++
++}
++
++
++/************************************
++* SPI_write_bit
++* bit_EEDO -> 1 or 0 to be written
++************************************/
++void SPI_write_bit(char bit_EEDO)
++{
++ unsigned int addr;
++ unsigned int value;
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++ value = readl(addr) |GPIO_EECK |GPIO_MOSI ; /* set EECK/MISO Pin to output */
++ writel(value,addr);
++ if(bit_EEDO)
++ {
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++ writel(GPIO_MOSI,addr); /* set MISO to 1 */
++
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(GPIO_MOSI,addr); /* set MISO to 0 */
++ }
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); /* set EECK to 1 */
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); /* set EECK to 0 */
++
++ //return ;
++}
++
++/**********************************************************************
++* read a bit from ADM6996 register
++***********************************************************************/
++unsigned int SPI_read_bit(void) // read data from
++{
++ unsigned int addr;
++ unsigned int value;
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input
++ writel(value,addr);
++
++ addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); // set EECK to 1
++
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN);
++ value = readl(addr) ;
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); // set EECK to 0
++
++
++ value = value >> 30;
++ return value ;
++}
++
++/******************************************
++* SPI_default
++* EEPROM content default value
++*******************************************/
++int SPI_default(void)
++{
++ int i;
++ unsigned reg_val,cmd;
++
++#if 0
++ SPI_write(7,0,0x1C,0x01); // map code space to 0
++
++ reg_val = SPI_read(7,0,0x10);
++ reg_val |= 0x0146;
++ reg_val &= ~0x0001;
++ SPI_write(7,0,0x10,reg_val); // reset iCPU and enable ext_access
++ SPI_write(7,0,0x11,0x0000); // start address
++ for(i=0;i<sizeof(vts_img);i++){
++ SPI_write(7,0,0x12,vts_img[i]); // fill in ROM data
++ }
++ reg_val |= BIT(0)|BIT(3);
++ SPI_write(7,0,0x10,reg_val); // release iCPU
++ SPI_write(7,0,0x10,SPI_read(7,0,0x10)&~BIT(7)); // release iCPU
++ return ;
++#endif
++
++
++ for(i=0;i<15;i++){
++ if(i!=6 && i!=7)
++ SPI_write(3,2,0,0x1010400+i); // Initial memory
++ mdelay(1);
++ }
++
++ mdelay(30);
++
++ SPI_write(2,0,0xB0,0x05); // Clear MAC table
++ SPI_write(2,0,0xD0,0x03); // Clear VLAN
++
++ //for(i=0;i<5;i++)
++ SPI_write(1,6,0x19,0x2C); // Double Data rate
++
++ for(i=0;i<4;i++){
++ SPI_write(1,i,0x00,0x30050472); // MAC configure
++ SPI_write(1,i,0x00,0x10050442); // MAC configure
++ SPI_write(1,i,0x10,0x5F4); // Max length
++ SPI_write(1,i,0x04,0x00030000); // Flow control
++ SPI_write(1,i,0xDF,0x00000001); // Flow control
++ SPI_write(1,i,0x08,0x000050c2); // Flow control mac high
++ SPI_write(1,i,0x0C,0x002b00f1); // Flow control mac low
++ SPI_write(1,i,0x6E,BIT(3)); // forward pause frame
++ }
++ SPI_write(1,i,0x00,0x20000030); // set port 4 as reset
++
++ SPI_write(1,6,0x00,0x300701B1); // MAC configure
++ SPI_write(1,6,0x00,0x10070181); // MAC configure
++ SPI_write(1,6,0x10,0x5F4); // Max length
++ SPI_write(1,6,0x04,0x00030000); // Flow control
++ SPI_write(1,6,0xDF,0x00000002); // Flow control
++ SPI_write(1,6,0x08,0x000050c2); // Flow control mac high
++ SPI_write(1,6,0x0C,0x002b00f1); // Flow control mac low
++ SPI_write(1,6,0x6E,BIT(3)); // forward pause frame
++
++
++ //SPI_write(7,0,0x05,0x31); // MII delay for loader
++ //SPI_write(7,0,0x05,0x01); // MII delay for kernel
++ SPI_write(7,0,0x05,0x33);
++
++ SPI_write(2,0,0x10,0x4F); // Receive mask
++
++ mdelay(50);
++
++ SPI_write(7,0,0x14,0x02); // Release Reset
++
++ mdelay(3);
++
++ for(i=0;i<4;i++){
++ init_seq_7385(i);
++ phy_receiver_init(i);
++ cmd = BIT(26)|(i<<21)|(0x1B<<16); // Config LED
++ SPI_write(3,0,1,cmd);
++ mdelay(10);
++ reg_val = SPI_read(3,0,2);
++ reg_val &= 0xFF00;
++ reg_val |= 0x61;
++ cmd = (i<<21)|(0x1B<<16)|reg_val;
++ SPI_write(3,0,1,cmd);
++
++ cmd = BIT(26)|(i<<21)|(0x04<<16); // Pause enable
++ SPI_write(3,0,1,cmd);
++ mdelay(10);
++ reg_val = SPI_read(3,0,2);
++ reg_val |= BIT(10)|BIT(11);
++ cmd = (i<<21)|(0x04<<16)|reg_val;
++ SPI_write(3,0,1,cmd);
++
++ cmd = BIT(26)|(i<<21)|(0x0<<16); // collision test and re-negotiation
++ SPI_write(3,0,1,cmd);
++ mdelay(10);
++ reg_val = SPI_read(3,0,2);
++ reg_val |= BIT(7)|BIT(8)|BIT(9);
++ cmd = (i<<21)|(0x0<<16)|reg_val;
++ SPI_write(3,0,1,cmd);
++ }
++ init_seq_7385(i);
++ writel(0x5787a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For switch timing
++ return 4; // return port_no
++}
++EXPORT_SYMBOL(SPI_default);
++
++/***********************************************************
++* SPI_CS_enable
++* before access ,you have to enable Chip Select. (pull high)
++* When fisish, you should pull low !!
++*************************************************************/
++void SPI_CS_enable(unsigned char enable)
++{
++
++ unsigned int addr,value;
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */
++ writel(value,addr);
++
++ if(enable)
++ {
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(GPIO_EECK,addr); /* set EECK to 0 */ // pull low clk first
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(GPIO_EECS,addr); /* set EECS to 0 */
++
++ }
++ else
++ {
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
++ writel(GPIO_EECK,addr); /* set EECK to 1 */ // pull high clk before disable
++ writel(GPIO_EECS,addr); /* set EECS to 1 */
++ }
++}
++
++
++/************************************************
++* SPI_read
++* table -> which table to be read: 1/count 0/EEPROM
++* addr -> Address to be read
++* return : Value of the register
++*************************************************/
++unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr)
++{
++ int i;
++ char bit;
++ unsigned int data,value=0;
++
++ SPI_CS_enable(1);
++
++ data = (block<<5) | subblock;
++
++ //send write command
++ for(i=SPI_OP_LEN-1;i>=0;i--)
++ {
++ bit = (data>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++
++ // send 8 bits address (MSB first, LSB last)
++ for(i=SPI_ADD_LEN-1;i>=0;i--)
++ {
++ bit = (addr>>i)& 0x01;
++ SPI_write_bit(bit);
++ }
++
++ // dummy read for chip ready
++ for(i=0;i<8;i++)
++ SPI_read_bit();
++
++
++ // read 32 bits data (MSB first, LSB last)
++ for(i=SPI_DAT_LEN-1;i>=0;i--)
++ {
++ bit = SPI_read_bit();
++ value |= bit<<i;
++ }
++
++ SPI_CS_enable(0); // CS low
++ return(value);
++
++}
++
++void pull_low_gpio(unsigned int val)
++{
++
++ unsigned int addr,value;
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
++ writel(val,addr); /* set pin low to save power*/
++
++ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
++ value = readl(addr) & ~ val; /* set Pin to input */
++ writel(value,addr);
++
++// value = readl(GMAC_GLOBAL_BASE_ADDR+0x0C); // reset GPIO1 module(self clear)
++// value |= BIT(21);
++// writel(value,GMAC_GLOBAL_BASE_ADDR+0x0C);
++}
++
++unsigned int SPI_get_identifier(void)
++{
++ unsigned int flag=0;
++
++ SPI_write(7,0,0x01,0x01);
++ flag = SPI_read(7,0,0x18); // chip id
++ if((flag & 0x0ffff000)==0x07385000){
++ printk("Get VSC-switch ID 0x%08x\n",flag);
++ //Giga_switch = 1;;
++ return 1;
++ }
++ else{
++ printk("VSC-switch not found\n");
++ //Giga_switch = 0;
++ pull_low_gpio(GPIO_EECK|GPIO_MOSI|GPIO_MISO|GPIO_EECS); // reduce power consume
++ return 0;
++ }
++}
++EXPORT_SYMBOL(SPI_get_identifier);
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,2223 @@
++/****************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl351x_gmac.h
++* Description :
++* Define for device driver of Storlink SL351x network Engine
++*
++* Historych
++*
++* Date Writer Description
++* ----------- ----------- -------------------------------------------------
++* 08/22/2005 Gary Chen Create and implement
++*
++****************************************************************************/
++#ifndef _GMAC_SL351x_H
++#define _GMAC_SL351x_H
++#include <linux/skbuff.h>
++
++#define SL351x_GMAC_WORKAROUND 1
++
++#undef BIG_ENDIAN
++#define BIG_ENDIAN 0
++#define GMAC_DEBUG 1
++#define GMAC_NUM 2
++//#define L2_jumbo_frame 1
++
++#define _PACKED_ __attribute__ ((aligned(1), packed))
++
++#ifndef BIT
++#define BIT(x) (1 << (x))
++#endif
++
++#define REG32(addr) (*(volatile unsigned long * const)(addr))
++
++#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
++#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
++
++// Define frame size
++#define ETHER_ADDR_LEN 6
++#define GMAC_MAX_ETH_FRAME_SIZE 1514
++#define GMAC_TX_BUF_SIZE ((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31))
++#define MAX_ISR_WORK 20
++
++#ifdef L2_jumbo_frame
++#define SW_RX_BUF_SIZE 9234 // 2048 ,9234
++#else
++#define SW_RX_BUF_SIZE 1536 // 2048
++#endif
++
++#define HW_RX_BUF_SIZE 1536 // 2048
++
++#define GMAC_DEV_TX_TIMEOUT (10*HZ) //add by CH
++#define SKB_RESERVE_BYTES 16
++
++/**********************************************************************
++ * Base Register
++ **********************************************************************/
++#define TOE_BASE (IO_ADDRESS(SL2312_TOE_BASE))
++#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++#define TOE_GLOBAL_BASE (TOE_BASE + 0x0000)
++#define TOE_NONTOE_QUE_HDR_BASE (TOE_BASE + 0x2000)
++#define TOE_TOE_QUE_HDR_BASE (TOE_BASE + 0x3000)
++#define TOE_V_BIT_BASE (TOE_BASE + 0x4000)
++#define TOE_A_BIT_BASE (TOE_BASE + 0x6000)
++#define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000)
++#define TOE_GMAC0_BASE (TOE_BASE + 0xA000)
++#define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000)
++#define TOE_GMAC1_BASE (TOE_BASE + 0xE000)
++
++/**********************************************************************
++ * Queue ID
++ **********************************************************************/
++#define TOE_SW_FREE_QID 0x00
++#define TOE_HW_FREE_QID 0x01
++#define TOE_GMAC0_SW_TXQ0_QID 0x02
++#define TOE_GMAC0_SW_TXQ1_QID 0x03
++#define TOE_GMAC0_SW_TXQ2_QID 0x04
++#define TOE_GMAC0_SW_TXQ3_QID 0x05
++#define TOE_GMAC0_SW_TXQ4_QID 0x06
++#define TOE_GMAC0_SW_TXQ5_QID 0x07
++#define TOE_GMAC0_HW_TXQ0_QID 0x08
++#define TOE_GMAC0_HW_TXQ1_QID 0x09
++#define TOE_GMAC0_HW_TXQ2_QID 0x0A
++#define TOE_GMAC0_HW_TXQ3_QID 0x0B
++#define TOE_GMAC1_SW_TXQ0_QID 0x12
++#define TOE_GMAC1_SW_TXQ1_QID 0x13
++#define TOE_GMAC1_SW_TXQ2_QID 0x14
++#define TOE_GMAC1_SW_TXQ3_QID 0x15
++#define TOE_GMAC1_SW_TXQ4_QID 0x16
++#define TOE_GMAC1_SW_TXQ5_QID 0x17
++#define TOE_GMAC1_HW_TXQ0_QID 0x18
++#define TOE_GMAC1_HW_TXQ1_QID 0x19
++#define TOE_GMAC1_HW_TXQ2_QID 0x1A
++#define TOE_GMAC1_HW_TXQ3_QID 0x1B
++#define TOE_GMAC0_DEFAULT_QID 0x20
++#define TOE_GMAC1_DEFAULT_QID 0x21
++#define TOE_CLASSIFICATION_QID(x) (0x22 + x) // 0x22 ~ 0x2F
++#define TOE_TOE_QID(x) (0x40 + x) // 0x40 ~ 0x7F
++
++/**********************************************************************
++ * TOE DMA Queue Number should be 2^n, n = 6...12
++ * TOE DMA Queues are the following queue types:
++ * SW Free Queue, HW Free Queue,
++ * GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
++ * They have same descriptor numbers.
++ * The base address and descriptor number are configured at
++ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
++ **********************************************************************/
++#define TOE_SW_FREEQ_DESC_POWER 10
++#define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER)
++#define TOE_HW_FREEQ_DESC_POWER 8
++#define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER)
++#define TOE_GMAC0_SWTXQ_DESC_POWER 8
++#define TOE_GMAC0_SWTXQ_DESC_NUM (1<<TOE_GMAC0_SWTXQ_DESC_POWER)
++#define TOE_GMAC0_HWTXQ_DESC_POWER 8
++#define TOE_GMAC0_HWTXQ_DESC_NUM (1<<TOE_GMAC0_HWTXQ_DESC_POWER)
++#define TOE_GMAC1_SWTXQ_DESC_POWER 8
++#define TOE_GMAC1_SWTXQ_DESC_NUM (1<<TOE_GMAC1_SWTXQ_DESC_POWER)
++#define TOE_GMAC1_HWTXQ_DESC_POWER 8
++#define TOE_GMAC1_HWTXQ_DESC_NUM (1<<TOE_GMAC1_HWTXQ_DESC_POWER)
++#define TOE_DEFAULT_Q0_DESC_POWER 8
++#define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER)
++#define TOE_DEFAULT_Q1_DESC_POWER 8
++#define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER)
++#define TOE_TOE_DESC_POWER 8
++#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
++#define TOE_CLASS_DESC_POWER 8
++#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
++#define TOE_INTR_DESC_POWER 8
++#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
++
++#define TOE_TOE_QUEUE_MAX 64
++#define TOE_TOE_QUEUE_NUM 64
++#define TOE_CLASS_QUEUE_MAX 14
++#define TOE_CLASS_QUEUE_NUM 14
++#define TOE_INTR_QUEUE_MAX 4
++#define TOE_INTR_QUEUE_NUM 4
++#define TOE_SW_TXQ_MAX 6
++#define TOE_SW_TXQ_NUM 1
++#define TOE_HW_TXQ_MAX 4
++#define TOE_HW_TXQ_NUM 4
++#define _max(x,y) ((x>y) ? x :y)
++#define TX_DESC_NUM _max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM)
++
++#define RWPTR_ADVANCE_ONE(x, max) ((x == (max -1)) ? 0 : x+1)
++#define RWPTR_RECEDE_ONE(x, max) ((x == 0) ? (max -1) : x-1)
++#define SET_WPTR(addr, data) (*(volatile u16 * const)((u32)(addr)+2) = (u16)data)
++#define SET_RPTR(addr, data) (*(volatile u16 * const)((u32)(addr)) = (u16)data)
++
++/**********************************************************************
++ * Global registers
++ * #define TOE_GLOBAL_BASE (TOE_BASE + 0x0000)
++ * Base 0x60000000
++ **********************************************************************/
++#define GLOBAL_TOE_VERSION_REG 0x0000
++#define GLOBAL_SW_FREEQ_BASE_SIZE_REG 0x0004
++#define GLOBAL_HW_FREEQ_BASE_SIZE_REG 0x0008
++#define GLOBAL_DMA_SKB_SIZE_REG 0x0010
++#define GLOBAL_SWFQ_RWPTR_REG 0x0014
++#define GLOBAL_HWFQ_RWPTR_REG 0x0018
++#define GLOBAL_INTERRUPT_STATUS_0_REG 0x0020
++#define GLOBAL_INTERRUPT_ENABLE_0_REG 0x0024
++#define GLOBAL_INTERRUPT_SELECT_0_REG 0x0028
++#define GLOBAL_INTERRUPT_STATUS_1_REG 0x0030
++#define GLOBAL_INTERRUPT_ENABLE_1_REG 0x0034
++#define GLOBAL_INTERRUPT_SELECT_1_REG 0x0038
++#define GLOBAL_INTERRUPT_STATUS_2_REG 0x0040
++#define GLOBAL_INTERRUPT_ENABLE_2_REG 0x0044
++#define GLOBAL_INTERRUPT_SELECT_2_REG 0x0048
++#define GLOBAL_INTERRUPT_STATUS_3_REG 0x0050
++#define GLOBAL_INTERRUPT_ENABLE_3_REG 0x0054
++#define GLOBAL_INTERRUPT_SELECT_3_REG 0x0058
++#define GLOBAL_INTERRUPT_STATUS_4_REG 0x0060
++#define GLOBAL_INTERRUPT_ENABLE_4_REG 0x0064
++#define GLOBAL_INTERRUPT_SELECT_4_REG 0x0068
++#define GLOBAL_HASH_TABLE_BASE_REG 0x006C
++#define GLOBAL_QUEUE_THRESHOLD_REG 0x0070
++
++/**********************************************************************
++ * GMAC 0/1 DMA/TOE register
++ * #define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000)
++ * #define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000)
++ * Base 0x60008000 or 0x6000C000
++ **********************************************************************/
++#define GMAC_DMA_CTRL_REG 0x0000
++#define GMAC_TX_WEIGHTING_CTRL_0_REG 0x0004
++#define GMAC_TX_WEIGHTING_CTRL_1_REG 0x0008
++#define GMAC_SW_TX_QUEUE0_PTR_REG 0x000C
++#define GMAC_SW_TX_QUEUE1_PTR_REG 0x0010
++#define GMAC_SW_TX_QUEUE2_PTR_REG 0x0014
++#define GMAC_SW_TX_QUEUE3_PTR_REG 0x0018
++#define GMAC_SW_TX_QUEUE4_PTR_REG 0x001C
++#define GMAC_SW_TX_QUEUE5_PTR_REG 0x0020
++#define GMAC_HW_TX_QUEUE0_PTR_REG 0x0024
++#define GMAC_HW_TX_QUEUE1_PTR_REG 0x0028
++#define GMAC_HW_TX_QUEUE2_PTR_REG 0x002C
++#define GMAC_HW_TX_QUEUE3_PTR_REG 0x0030
++#define GMAC_DMA_TX_FIRST_DESC_REG 0x0038
++#define GMAC_DMA_TX_CURR_DESC_REG 0x003C
++#define GMAC_DMA_TX_DESC_WORD0_REG 0x0040
++#define GMAC_DMA_TX_DESC_WORD1_REG 0x0044
++#define GMAC_DMA_TX_DESC_WORD2_REG 0x0048
++#define GMAC_DMA_TX_DESC_WORD3_REG 0x004C
++#define GMAC_SW_TX_QUEUE_BASE_REG 0x0050
++#define GMAC_HW_TX_QUEUE_BASE_REG 0x0054
++#define GMAC_DMA_RX_FIRST_DESC_REG 0x0058
++#define GMAC_DMA_RX_CURR_DESC_REG 0x005C
++#define GMAC_DMA_RX_DESC_WORD0_REG 0x0060
++#define GMAC_DMA_RX_DESC_WORD1_REG 0x0064
++#define GMAC_DMA_RX_DESC_WORD2_REG 0x0068
++#define GMAC_DMA_RX_DESC_WORD3_REG 0x006C
++#define GMAC_HASH_ENGINE_REG0 0x0070
++#define GMAC_HASH_ENGINE_REG1 0x0074
++#define GMAC_MR0CR0 0x0078 // matching rule 0 Control register 0
++#define GMAC_MR0CR1 0x007C // matching rule 0 Control register 1
++#define GMAC_MR0CR2 0x0080 // matching rule 0 Control register 2
++#define GMAC_MR1CR0 0x0084 // matching rule 1 Control register 0
++#define GMAC_MR1CR1 0x0088 // matching rule 1 Control register 1
++#define GMAC_MR1CR2 0x008C // matching rule 1 Control register 2
++#define GMAC_MR2CR0 0x0090 // matching rule 2 Control register 0
++#define GMAC_MR2CR1 0x0094 // matching rule 2 Control register 1
++#define GMAC_MR2CR2 0x0098 // matching rule 2 Control register 2
++#define GMAC_MR3CR0 0x009C // matching rule 3 Control register 0
++#define GMAC_MR3CR1 0x00A0 // matching rule 3 Control register 1
++#define GMAC_MR3CR2 0x00A4 // matching rule 3 Control register 2
++#define GMAC_SPR0 0x00A8 // Support Protocol Regsister 0
++#define GMAC_SPR1 0x00AC // Support Protocol Regsister 1
++#define GMAC_SPR2 0x00B0 // Support Protocol Regsister 2
++#define GMAC_SPR3 0x00B4 // Support Protocol Regsister 3
++#define GMAC_SPR4 0x00B8 // Support Protocol Regsister 4
++#define GMAC_SPR5 0x00BC // Support Protocol Regsister 5
++#define GMAC_SPR6 0x00C0 // Support Protocol Regsister 6
++#define GMAC_SPR7 0x00C4 // Support Protocol Regsister 7
++#define GMAC_AHB_WEIGHT_REG 0x00C8 // GMAC Hash/Rx/Tx AHB Weighting register
++
++/**********************************************************************
++ * TOE GMAC 0/1 register
++ * #define TOE_GMAC0_BASE (TOE_BASE + 0xA000)
++ * #define TOE_GMAC1_BASE (TOE_BASE + 0xE000)
++ * Base 0x6000A000 or 0x6000E000
++ **********************************************************************/
++enum GMAC_REGISTER {
++ GMAC_STA_ADD0 = 0x0000,
++ GMAC_STA_ADD1 = 0x0004,
++ GMAC_STA_ADD2 = 0x0008,
++ GMAC_RX_FLTR = 0x000c,
++ GMAC_MCAST_FIL0 = 0x0010,
++ GMAC_MCAST_FIL1 = 0x0014,
++ GMAC_CONFIG0 = 0x0018,
++ GMAC_CONFIG1 = 0x001c,
++ GMAC_CONFIG2 = 0x0020,
++ GMAC_CONFIG3 = 0x0024,
++ GMAC_RESERVED = 0x0028,
++ GMAC_STATUS = 0x002c,
++ GMAC_IN_DISCARDS= 0x0030,
++ GMAC_IN_ERRORS = 0x0034,
++ GMAC_IN_MCAST = 0x0038,
++ GMAC_IN_BCAST = 0x003c,
++ GMAC_IN_MAC1 = 0x0040, // for STA 1 MAC Address
++ GMAC_IN_MAC2 = 0x0044 // for STA 2 MAC Address
++};
++/**********************************************************************
++ * TOE version Register (offset 0x0000)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int reserved : 15; // bit 31:17
++ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry
++ unsigned int device_id : 12; // bit 15:4 Device ID
++ unsigned int revision_id : 4; // bit 3:0 Revision ID
++#else
++ unsigned int revision_id : 4; // bit 3:0 Revision ID
++ unsigned int device_id : 12; // bit 15:4 Device ID
++ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry
++ unsigned int reserved : 15; // bit 31:17
++#endif
++ } bits;
++} TOE_VERSION_T;
++
++
++/**********************************************************************
++ * DMA Queues description Ring Base Address/Size Register (offset 0x0004)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int base_size;
++} DMA_Q_BASE_SIZE_T;
++#define DMA_Q_BASE_MASK (~0x0f)
++
++/**********************************************************************
++ * DMA SKB Buffer register (offset 0x0008)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0008
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size
++ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size
++#else
++ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size
++ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size
++#endif
++ } bits;
++} DMA_SKB_SIZE_T;
++
++/**********************************************************************
++ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_000c
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW
++ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO
++#else
++ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO
++ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW
++#endif
++ } bits;
++} DMA_RWPTR_T;
++
++/**********************************************************************
++ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010)
++ **********************************************************************/
++// see DMA_RWPTR_T structure
++
++/**********************************************************************
++ * Interrupt Status Register 0 (offset 0x0020)
++ * Interrupt Mask Register 0 (offset 0x0024)
++ * Interrupt Select Register 0 (offset 0x0028)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0020
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx
++ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error
++ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx
++ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error
++ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx
++ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error
++ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx
++ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error
++ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt
++ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt
++ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt
++ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt
++ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt
++ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt
++ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt
++ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt
++ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt
++ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt
++ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt
++ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt
++ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt
++ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt
++ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt
++ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt
++ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt
++ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt
++ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt
++ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt
++ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt
++ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt
++ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt
++ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt
++#else
++ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt
++ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt
++ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt
++ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt
++ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt
++ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt
++ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt
++ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt
++ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt
++ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt
++ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt
++ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt
++ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt
++ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt
++ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt
++ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt
++ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt
++ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt
++ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt
++ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt
++ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt
++ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt
++ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt
++ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt
++ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error
++ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx
++ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error
++ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx
++ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error
++ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx
++ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error
++ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx
++#endif
++ } bits;
++} INTR_REG0_T;
++
++#define GMAC1_TXDERR_INT_BIT BIT(31)
++#define GMAC1_TXPERR_INT_BIT BIT(30)
++#define GMAC0_TXDERR_INT_BIT BIT(29)
++#define GMAC0_TXPERR_INT_BIT BIT(28)
++#define GMAC1_RXDERR_INT_BIT BIT(27)
++#define GMAC1_RXPERR_INT_BIT BIT(26)
++#define GMAC0_RXDERR_INT_BIT BIT(25)
++#define GMAC0_RXPERR_INT_BIT BIT(24)
++#define GMAC1_SWTQ15_FIN_INT_BIT BIT(23)
++#define GMAC1_SWTQ14_FIN_INT_BIT BIT(22)
++#define GMAC1_SWTQ13_FIN_INT_BIT BIT(21)
++#define GMAC1_SWTQ12_FIN_INT_BIT BIT(20)
++#define GMAC1_SWTQ11_FIN_INT_BIT BIT(19)
++#define GMAC1_SWTQ10_FIN_INT_BIT BIT(18)
++#define GMAC0_SWTQ05_FIN_INT_BIT BIT(17)
++#define GMAC0_SWTQ04_FIN_INT_BIT BIT(16)
++#define GMAC0_SWTQ03_FIN_INT_BIT BIT(15)
++#define GMAC0_SWTQ02_FIN_INT_BIT BIT(14)
++#define GMAC0_SWTQ01_FIN_INT_BIT BIT(13)
++#define GMAC0_SWTQ00_FIN_INT_BIT BIT(12)
++#define GMAC1_SWTQ15_EOF_INT_BIT BIT(11)
++#define GMAC1_SWTQ14_EOF_INT_BIT BIT(10)
++#define GMAC1_SWTQ13_EOF_INT_BIT BIT(9)
++#define GMAC1_SWTQ12_EOF_INT_BIT BIT(8)
++#define GMAC1_SWTQ11_EOF_INT_BIT BIT(7)
++#define GMAC1_SWTQ10_EOF_INT_BIT BIT(6)
++#define GMAC0_SWTQ05_EOF_INT_BIT BIT(5)
++#define GMAC0_SWTQ04_EOF_INT_BIT BIT(4)
++#define GMAC0_SWTQ03_EOF_INT_BIT BIT(3)
++#define GMAC0_SWTQ02_EOF_INT_BIT BIT(2)
++#define GMAC0_SWTQ01_EOF_INT_BIT BIT(1)
++#define GMAC0_SWTQ00_EOF_INT_BIT BIT(0)
++
++
++/**********************************************************************
++ * Interrupt Status Register 1 (offset 0x0030)
++ * Interrupt Mask Register 1 (offset 0x0034)
++ * Interrupt Select Register 1 (offset 0x0038)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0030
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt
++ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt
++ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt
++ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt
++ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts
++ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts
++ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts
++ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts
++ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt
++ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt
++ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt
++ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt
++ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt
++ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt
++ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt
++ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt
++ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt
++ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt
++ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt
++#else
++ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt
++ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt
++ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt
++ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt
++ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt
++ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt
++ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt
++ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt
++ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt
++ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt
++ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt
++ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts
++ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts
++ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts
++ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts
++ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt
++ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt
++ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt
++ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt
++#endif
++ } bits;
++} INTR_REG1_T;
++
++#define TOE_IQ3_FULL_INT_BIT BIT(31)
++#define TOE_IQ2_FULL_INT_BIT BIT(30)
++#define TOE_IQ1_FULL_INT_BIT BIT(29)
++#define TOE_IQ0_FULL_INT_BIT BIT(28)
++#define TOE_IQ3_INT_BIT BIT(27)
++#define TOE_IQ2_INT_BIT BIT(26)
++#define TOE_IQ1_INT_BIT BIT(25)
++#define TOE_IQ0_INT_BIT BIT(24)
++#define GMAC1_HWTQ13_EOF_INT_BIT BIT(23)
++#define GMAC1_HWTQ12_EOF_INT_BIT BIT(22)
++#define GMAC1_HWTQ11_EOF_INT_BIT BIT(21)
++#define GMAC1_HWTQ10_EOF_INT_BIT BIT(20)
++#define GMAC0_HWTQ03_EOF_INT_BIT BIT(19)
++#define GMAC0_HWTQ02_EOF_INT_BIT BIT(18)
++#define GMAC0_HWTQ01_EOF_INT_BIT BIT(17)
++#define GMAC0_HWTQ00_EOF_INT_BIT BIT(16)
++#define CLASS_RX_INT_BIT(x) BIT((x+2))
++#define DEFAULT_Q1_INT_BIT BIT(1)
++#define DEFAULT_Q0_INT_BIT BIT(0)
++
++#define TOE_IQ_INT_BITS (TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
++ TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
++#define TOE_IQ_FULL_BITS (TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
++ TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
++#define TOE_IQ_ALL_BITS (TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
++#define TOE_CLASS_RX_INT_BITS 0xfffc
++
++/**********************************************************************
++ * Interrupt Status Register 2 (offset 0x0040)
++ * Interrupt Mask Register 2 (offset 0x0044)
++ * Interrupt Select Register 2 (offset 0x0048)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0040
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt
++ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt
++ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt
++ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt
++ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt
++ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt
++ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt
++ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt
++ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt
++ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt
++ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt
++ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt
++ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt
++ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt
++ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt
++ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt
++ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt
++ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt
++ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt
++ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt
++ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt
++ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt
++ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt
++ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt
++ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt
++ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt
++ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt
++ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt
++ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt
++ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt
++ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt
++ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt
++#else
++ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt
++ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt
++ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt
++ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt
++ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt
++ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt
++ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt
++ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt
++ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt
++ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt
++ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt
++ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt
++ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt
++ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt
++ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt
++ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt
++ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt
++ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt
++ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt
++ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt
++ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt
++ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt
++ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt
++ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt
++ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt
++ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt
++ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt
++ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt
++ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt
++ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt
++ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt
++ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt
++#endif
++ } bits;
++} INTR_REG2_T;
++
++#define TOE_QL_FULL_INT_BIT(x) BIT(x)
++
++/**********************************************************************
++ * Interrupt Status Register 3 (offset 0x0050)
++ * Interrupt Mask Register 3 (offset 0x0054)
++ * Interrupt Select Register 3 (offset 0x0058)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0050
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt
++ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt
++ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt
++ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt
++ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt
++ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt
++ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt
++ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt
++ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt
++ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt
++ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt
++ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt
++ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt
++ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt
++ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt
++ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt
++ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt
++ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt
++ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt
++ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt
++ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt
++ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt
++ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt
++ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt
++ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt
++ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt
++ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt
++ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt
++ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt
++ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt
++ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt
++ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt
++#else
++ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt
++ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt
++ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt
++ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt
++ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt
++ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt
++ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt
++ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt
++ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt
++ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt
++ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt
++ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt
++ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt
++ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt
++ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt
++ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt
++ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt
++ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt
++ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt
++ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt
++ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt
++ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt
++ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt
++ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt
++ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt
++ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt
++ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt
++ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt
++ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt
++ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt
++ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt
++ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt
++#endif
++ } bits;
++} INTR_REG3_T;
++
++#define TOE_QH_FULL_INT_BIT(x) BIT(x-32)
++
++/**********************************************************************
++ * Interrupt Status Register 4 (offset 0x0060)
++ * Interrupt Mask Register 4 (offset 0x0064)
++ * Interrupt Select Register 4 (offset 0x0068)
++ **********************************************************************/
++typedef union
++{
++ unsigned char byte;
++ struct bit_0060
++ {
++#if (BIG_ENDIAN==1)
++ unsigned char reserved : 1; //
++ unsigned char cnt_full : 1; // MIB counters half full interrupt
++ unsigned char rx_pause_on : 1; // received pause on frame interrupt
++ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt
++ unsigned char rx_pause_off : 1; // received pause off frame interrupt
++ unsigned char tx_pause_off : 1; // received pause off frame interrupt
++ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt
++ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode
++#else
++ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode
++ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt
++ unsigned char tx_pause_off : 1; // received pause off frame interrupt
++ unsigned char rx_pause_off : 1; // received pause off frame interrupt
++ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt
++ unsigned char rx_pause_on : 1; // received pause on frame interrupt
++ unsigned char cnt_full : 1; // MIB counters half full interrupt
++ unsigned char reserved : 1; //
++#endif
++ } _PACKED_ bits;
++} _PACKED_ GMAC_INTR_T;
++
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0060_2
++ {
++#if (BIG_ENDIAN==1)
++ GMAC_INTR_T gmac1;
++ GMAC_INTR_T gmac0;
++ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr.
++ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr.
++ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr.
++#else
++#endif
++ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr.
++ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr.
++ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr.
++ GMAC_INTR_T gmac0;
++ GMAC_INTR_T gmac1;
++ } bits;
++} INTR_REG4_T;
++
++#define GMAC1_RESERVED_INT_BIT BIT(31)
++#define GMAC1_MIB_INT_BIT BIT(30)
++#define GMAC1_RX_PAUSE_ON_INT_BIT BIT(29)
++#define GMAC1_TX_PAUSE_ON_INT_BIT BIT(28)
++#define GMAC1_RX_PAUSE_OFF_INT_BIT BIT(27)
++#define GMAC1_TX_PAUSE_OFF_INT_BIT BIT(26)
++#define GMAC1_RX_OVERRUN_INT_BIT BIT(25)
++#define GMAC1_STATUS_CHANGE_INT_BIT BIT(24)
++#define GMAC0_RESERVED_INT_BIT BIT(23)
++#define GMAC0_MIB_INT_BIT BIT(22)
++#define GMAC0_RX_PAUSE_ON_INT_BIT BIT(21)
++#define GMAC0_TX_PAUSE_ON_INT_BIT BIT(20)
++#define GMAC0_RX_PAUSE_OFF_INT_BIT BIT(19)
++#define GMAC0_TX_PAUSE_OFF_INT_BIT BIT(18)
++#define GMAC0_RX_OVERRUN_INT_BIT BIT(17)
++#define GMAC0_STATUS_CHANGE_INT_BIT BIT(16)
++#define CLASS_RX_FULL_INT_BIT(x) BIT((x+2))
++#define HWFQ_EMPTY_INT_BIT BIT(1)
++#define SWFQ_EMPTY_INT_BIT BIT(0)
++
++#if 1
++#define GMAC0_INT_BITS (GMAC0_MIB_INT_BIT)
++#define GMAC1_INT_BITS (GMAC1_MIB_INT_BIT)
++#else
++#define GMAC0_INT_BITS (GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
++ GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT | \
++ GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | \
++ GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT)
++#define GMAC1_INT_BITS (GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
++ GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT | \
++ GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | \
++ GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT)
++#endif
++
++#define CLASS_RX_FULL_INT_BITS 0xfffc
++
++/**********************************************************************
++ * GLOBAL_QUEUE_THRESHOLD_REG (offset 0x0070)
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_0070_2
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int toe_class : 8; // 31:24
++ unsigned int intrq : 8; // 23:16
++ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold
++ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold
++#else
++#endif
++ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold
++ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold
++ unsigned int intrq : 8; // 23:16
++ unsigned int toe_class : 8; // 31:24
++ } bits;
++} QUEUE_THRESHOLD_T;
++
++
++/**********************************************************************
++ * GMAC DMA Control Register
++ * GMAC0 offset 0x8000
++ * GMAC1 offset 0xC000
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8000
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable
++ unsigned int td_enable : 1; // bit 30 Tx DMA Enable
++ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA
++ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept
++ unsigned int reserved : 10; // bit 27:18
++ unsigned int rd_insert_bytes : 2; // bit 17:16
++ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control
++ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request
++ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width
++ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control
++ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request
++ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width
++#else
++ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width
++ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request
++ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control
++ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width
++ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request
++ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control
++ unsigned int rd_insert_bytes : 2; // bit 17:16
++ unsigned int reserved : 10; // bit 27:18
++ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept
++ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA
++ unsigned int td_enable : 1; // bit 30 Tx DMA Enable
++ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable
++#endif
++ } bits;
++} GMAC_DMA_CTRL_T;
++
++/**********************************************************************
++ * GMAC Tx Weighting Control Register 0
++ * GMAC0 offset 0x8004
++ * GMAC1 offset 0xC004
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8004
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 8; // bit 31:24
++ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0
++ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1
++ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2
++ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3
++#else
++ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3
++ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2
++ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1
++ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0
++ unsigned int reserved : 8; // bit 31:24
++#endif
++ } bits;
++} GMAC_TX_WCR0_T; // Weighting Control Register 0
++
++/**********************************************************************
++ * GMAC Tx Weighting Control Register 1
++ * GMAC0 offset 0x8008
++ * GMAC1 offset 0xC008
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8008
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 2; // bit 31:30
++ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5
++ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4
++ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3
++ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2
++ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1
++ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0
++#else
++ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0
++ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1
++ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2
++ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3
++ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4
++ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5
++ unsigned int reserved : 2; // bit 31:30
++#endif
++ } bits;
++} GMAC_TX_WCR1_T; // Weighting Control Register 1
++
++/**********************************************************************
++ * Queue Read/Write Pointer
++ * GMAC SW TX Queue 0~5 Read/Write Pointer register
++ * GMAC0 offset 0x800C ~ 0x8020
++ * GMAC1 offset 0xC00C ~ 0xC020
++ * GMAC HW TX Queue 0~3 Read/Write Pointer register
++ * GMAC0 offset 0x8024 ~ 0x8030
++ * GMAC1 offset 0xC024 ~ 0xC030
++ **********************************************************************/
++// see DMA_RWPTR_T structure
++
++/**********************************************************************
++ * GMAC DMA Tx First Description Address Register
++ * GMAC0 offset 0x8038
++ * GMAC1 offset 0xC038
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8038
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address
++ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle
++ unsigned int reserved : 3;
++#else
++ unsigned int reserved : 3;
++ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle
++ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address
++#endif
++ } bits;
++} GMAC_TXDMA_FIRST_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Current Description Address Register
++ * GMAC0 offset 0x803C
++ * GMAC1 offset 0xC03C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_803C
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address
++ unsigned int reserved : 4;
++#else
++ unsigned int reserved : 4;
++ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address
++#endif
++ } bits;
++} GMAC_TXDMA_CURR_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 0 Register
++ * GMAC0 offset 0x8040
++ * GMAC1 offset 0xC040
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8040
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 1; // bit 31
++ unsigned int derr : 1; // bit 30 data error during processing this descriptor
++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
++ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits
++ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed
++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
++ unsigned int buffer_size : 16; // bit 15:0 Transfer size
++#else
++ unsigned int buffer_size : 16; // bit 15:0 Transfer size
++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
++ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed
++ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits
++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
++ unsigned int derr : 1; // bit 30 data error during processing this descriptor
++ unsigned int reserved : 1; // bit 31
++#endif
++ } bits;
++} GMAC_TXDESC_0_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 1 Register
++ * GMAC0 offset 0x8044
++ * GMAC1 offset 0xC044
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct txdesc_word1
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved
++ unsigned int ip_fixed_len: 1; // bit 22
++ unsigned int bypass_tss : 1; // bit 21
++ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable
++ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable
++ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable
++ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable
++ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting
++ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count
++#else
++ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count
++ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting
++ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable
++ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable
++ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable
++ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable
++ unsigned int bypass_tss : 1; // bit 21
++ unsigned int ip_fixed_len: 1; // bit 22
++ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved
++#endif
++ } bits;
++} GMAC_TXDESC_1_T;
++
++#define TSS_IP_FIXED_LEN_BIT BIT(22)
++#define TSS_UDP_CHKSUM_BIT BIT(20)
++#define TSS_TCP_CHKSUM_BIT BIT(19)
++#define TSS_IPV6_ENABLE_BIT BIT(18)
++#define TSS_IP_CHKSUM_BIT BIT(17)
++#define TSS_MTU_ENABLE_BIT BIT(16)
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 2 Register
++ * GMAC0 offset 0x8048
++ * GMAC1 offset 0xC048
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int buf_adr;
++} GMAC_TXDESC_2_T;
++
++/**********************************************************************
++ * GMAC DMA Tx Description Word 3 Register
++ * GMAC0 offset 0x804C
++ * GMAC1 offset 0xC04C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct txdesc_word3
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
++ unsigned int reserved : 18; // bit 28:11
++ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count
++#else
++ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count
++ unsigned int reserved : 18; // bit 28:11
++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
++#endif
++ } bits;
++} GMAC_TXDESC_3_T;
++#define SOF_EOF_BIT_MASK 0x3fffffff
++#define SOF_BIT 0x80000000
++#define EOF_BIT 0x40000000
++#define EOFIE_BIT BIT(29)
++#define MTU_SIZE_BIT_MASK 0x7ff
++
++/**********************************************************************
++ * GMAC Tx Descriptor
++ **********************************************************************/
++typedef struct
++{
++ GMAC_TXDESC_0_T word0;
++ GMAC_TXDESC_1_T word1;
++ GMAC_TXDESC_2_T word2;
++ GMAC_TXDESC_3_T word3;
++} GMAC_TXDESC_T;
++
++
++/**********************************************************************
++ * GMAC DMA Rx First Description Address Register
++ * GMAC0 offset 0x8058
++ * GMAC1 offset 0xC058
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8058
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address
++ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle
++ unsigned int reserved : 3; // bit 2:0
++#else
++ unsigned int reserved : 3; // bit 2:0
++ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle
++ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address
++#endif
++ } bits;
++} GMAC_RXDMA_FIRST_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Current Description Address Register
++ * GMAC0 offset 0x805C
++ * GMAC1 offset 0xC05C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_805C
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address
++ unsigned int reserved : 4; // bit 3:0
++#else
++ unsigned int reserved : 4; // bit 3:0
++ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address
++#endif
++ } bits;
++} GMAC_RXDMA_CURR_DESC_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 0 Register
++ * GMAC0 offset 0x8060
++ * GMAC1 offset 0xC060
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8060
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue
++ unsigned int derr : 1; // bit 30 data error during processing this descriptor
++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
++ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status
++ unsigned int status : 4; // bit 24:22 Status of rx frame
++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
++ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame
++#else
++ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame
++ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
++ unsigned int status : 4; // bit 24:22 Status of rx frame
++ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status
++ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
++ unsigned int derr : 1; // bit 30 data error during processing this descriptor
++ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue
++#endif
++ } bits;
++} GMAC_RXDESC_0_T;
++
++#define GMAC_RXDESC_0_T_derr BIT(30)
++#define GMAC_RXDESC_0_T_perr BIT(29)
++#define GMAC_RXDESC_0_T_chksum_status(x) BIT((x+26))
++#define GMAC_RXDESC_0_T_status(x) BIT((x+22))
++#define GMAC_RXDESC_0_T_desc_count(x) BIT((x+16))
++
++#define RX_CHKSUM_IP_UDP_TCP_OK 0
++#define RX_CHKSUM_IP_OK_ONLY 1
++#define RX_CHKSUM_NONE 2
++#define RX_CHKSUM_IP_ERR_UNKNOWN 4
++#define RX_CHKSUM_IP_ERR 5
++#define RX_CHKSUM_TCP_UDP_ERR 6
++#define RX_CHKSUM_NUM 8
++
++#define RX_STATUS_GOOD_FRAME 0
++#define RX_STATUS_TOO_LONG_GOOD_CRC 1
++#define RX_STATUS_RUNT_FRAME 2
++#define RX_STATUS_SFD_NOT_FOUND 3
++#define RX_STATUS_CRC_ERROR 4
++#define RX_STATUS_TOO_LONG_BAD_CRC 5
++#define RX_STATUS_ALIGNMENT_ERROR 6
++#define RX_STATUS_TOO_LONG_BAD_ALIGN 7
++#define RX_STATUS_RX_ERR 8
++#define RX_STATUS_DA_FILTERED 9
++#define RX_STATUS_BUFFER_FULL 10
++#define RX_STATUS_NUM 16
++
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 1 Register
++ * GMAC0 offset 0x8064
++ * GMAC1 offset 0xC064
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct rxdesc_word1
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int sw_id : 16; // bit 31:16 Software ID
++ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count
++#else
++ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count
++ unsigned int sw_id : 16; // bit 31:16 Software ID
++#endif
++ } bits;
++} GMAC_RXDESC_1_T;
++
++/**********************************************************************
++ * GMAC DMA Rx Description Word 2 Register
++ * GMAC0 offset 0x8068
++ * GMAC1 offset 0xC068
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int buf_adr;
++} GMAC_RXDESC_2_T;
++
++#define RX_INSERT_NONE 0
++#define RX_INSERT_1_BYTE 1
++#define RX_INSERT_2_BYTE 2
++#define RX_INSERT_3_BYTE 3
++
++#define RX_INSERT_BYTES RX_INSERT_2_BYTE
++/**********************************************************************
++ * GMAC DMA Rx Description Word 3 Register
++ * GMAC0 offset 0x806C
++ * GMAC1 offset 0xC06C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct rxdesc_word3
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
++ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present
++ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet
++ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header
++ unsigned int abnormal : 1; // bit 25 abnormal case found
++ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected
++ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset
++ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset
++ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset
++#else
++ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset
++ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset
++ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset
++ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected
++ unsigned int abnormal : 1; // bit 25 abnormal case found
++ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header
++ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet
++ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present
++ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
++ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
++#endif
++ } bits;
++} GMAC_RXDESC_3_T;
++
++/**********************************************************************
++ * GMAC Rx Descriptor
++ **********************************************************************/
++typedef struct
++{
++ GMAC_RXDESC_0_T word0;
++ GMAC_RXDESC_1_T word1;
++ GMAC_RXDESC_2_T word2;
++ GMAC_RXDESC_3_T word3;
++} GMAC_RXDESC_T;
++
++/**********************************************************************
++ * GMAC Hash Engine Enable/Action Register 0 Offset Register
++ * GMAC0 offset 0x8070
++ * GMAC1 offset 0xC070
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8070
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1
++ unsigned int reserved1 : 1; // bit 30
++ unsigned int timing : 3; // bit 29:27
++ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset
++ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size
++ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0
++ unsigned int reserved0 : 4; // bit 14:11
++ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset
++ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size
++#else
++ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size
++ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset
++ unsigned int reserved0 : 4; // bit 14:11
++ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0
++ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size
++ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset
++ unsigned int timing : 3; // bit 29:27
++ unsigned int reserved1 : 1; // bit 30
++ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1
++#endif
++ } bits;
++} GMAC_HASH_ENABLE_REG0_T;
++
++/**********************************************************************
++ * GMAC Hash Engine Enable/Action Register 1 Offset Register
++ * GMAC0 offset 0x8074
++ * GMAC1 offset 0xC074
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8074
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3
++ unsigned int reserved3 : 4; // bit 30:27
++ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset
++ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size
++ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2
++ unsigned int reserved2 : 4; // bit 14:11
++ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset
++ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size
++#else
++ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size
++ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset
++ unsigned int reserved2 : 4; // bit 14:11
++ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2
++ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size
++ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset
++ unsigned int reserved1 : 4; // bit 30:27
++ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3
++#endif
++ } bits;
++} GMAC_HASH_ENABLE_REG1_T;
++
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 0
++ * GMAC0 offset 0x8078
++ * GMAC1 offset 0xC078
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_8078
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int l2 : 1; // bit 31 L2 matching enable
++ unsigned int l3 : 1; // bit 30 L3 matching enable
++ unsigned int l4 : 1; // bit 29 L4 matching enable
++ unsigned int l7 : 1; // bit 28 L7 matching enable
++ unsigned int port : 1; // bit 27 PORT ID matching enable
++ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched
++ unsigned int da : 1; // bit 23 MAC DA enable
++ unsigned int sa : 1; // bit 22 MAC SA enable
++ unsigned int ether_type : 1; // bit 21 Ethernet type enable
++ unsigned int vlan : 1; // bit 20 VLAN ID enable
++ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable
++ unsigned int reserved1 : 3; // bit 18:16
++ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6
++ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length
++ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label
++ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class
++ unsigned int reserved2 : 4; // bit 11:8
++ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0
++#else
++ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0
++ unsigned int reserved2 : 4; // bit 11:8
++ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class
++ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label
++ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length
++ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6
++ unsigned int reserved1 : 3; // bit 18:16
++ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable
++ unsigned int vlan : 1; // bit 20 VLAN ID enable
++ unsigned int ether_type : 1; // bit 21 Ethernet type enable
++ unsigned int sa : 1; // bit 22 MAC SA enable
++ unsigned int da : 1; // bit 23 MAC DA enable
++ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched
++ unsigned int port : 1; // bit 27 PORT ID matching enable
++ unsigned int l7 : 1; // bit 28 L7 matching enable
++ unsigned int l4 : 1; // bit 29 L4 matching enable
++ unsigned int l3 : 1; // bit 30 L3 matching enable
++ unsigned int l2 : 1; // bit 31 L2 matching enable
++#endif
++ } bits;
++} GMAC_MRxCR0_T;
++
++#define MR_L2_BIT BIT(31)
++#define MR_L3_BIT BIT(30)
++#define MR_L4_BIT BIT(29)
++#define MR_L7_BIT BIT(28)
++#define MR_PORT_BIT BIT(27)
++#define MR_PRIORITY_BIT BIT(26)
++#define MR_DA_BIT BIT(23)
++#define MR_SA_BIT BIT(22)
++#define MR_ETHER_TYPE_BIT BIT(21)
++#define MR_VLAN_BIT BIT(20)
++#define MR_PPPOE_BIT BIT(19)
++#define MR_IP_VER_BIT BIT(15)
++#define MR_IP_HDR_LEN_BIT BIT(14)
++#define MR_FLOW_LABLE_BIT BIT(13)
++#define MR_TOS_TRAFFIC_BIT BIT(12)
++#define MR_SPR_BIT(x) BIT(x)
++#define MR_SPR_BITS 0xff
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 1
++ * GMAC0 offset 0x807C
++ * GMAC1 offset 0xC07C
++ **********************************************************************/
++ typedef union
++{
++ unsigned int bits32;
++ struct bit_807C
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int sip : 1; // bit 31 Srce IP
++ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits
++ unsigned int dip : 1; // bit 23 Dest IP
++ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits
++ unsigned int l4_byte0_15 : 16; // bit 15: 0
++#else
++ unsigned int l4_byte0_15 : 16; // bit 15: 0
++ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits
++ unsigned int dip : 1; // bit 23 Dest IP
++ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits
++ unsigned int sip : 1; // bit 31 Srce IP
++#endif
++ } bits;
++} GMAC_MRxCR1_T;
++
++/**********************************************************************
++ * GMAC Matching Rule Control Register 2
++ * GMAC0 offset 0x8080
++ * GMAC1 offset 0xC080
++ **********************************************************************/
++ typedef union
++{
++ unsigned int bits32;
++ struct bit_8080
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int l4_byte16_24: 8; // bit 31: 24
++ unsigned int l7_byte0_23 : 24; // bit 23:0
++#else
++ unsigned int l7_byte0_23 : 24; // bit 23:0
++ unsigned int l4_byte16_24: 8; // bit 31: 24
++#endif
++ } bits;
++} GMAC_MRxCR2_T;
++
++
++/**********************************************************************
++ * GMAC Support registers
++ * GMAC0 offset 0x80A8
++ * GMAC1 offset 0xC0A8
++ **********************************************************************/
++ typedef union
++{
++ unsigned int bits32;
++ struct bit_80A8
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved: 21; // bit 31:11
++ unsigned int swap : 3; // bit 10:8 Swap
++ unsigned int protocol: 8; // bit 7:0 Supported protocol
++#else
++ unsigned int protocol: 8; // bit 7:0 Supported protocol
++ unsigned int swap : 3; // bit 10:8 Swap
++ unsigned int reserved: 21; // bit 31:11
++#endif
++ } bits;
++} GMAC_SPR_T;
++
++/**********************************************************************
++ * GMAC_AHB_WEIGHT registers
++ * GMAC0 offset 0x80C8
++ * GMAC1 offset 0xC0C8
++ **********************************************************************/
++ typedef union
++{
++ unsigned int bits32;
++ struct bit_80C8
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 7; // 31:25
++ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
++ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold
++ unsigned int tx_weight : 5; // 14:10
++ unsigned int rx_weight : 5; // 9:5
++ unsigned int hash_weight : 5; // 4:0
++#else
++ unsigned int hash_weight : 5; // 4:0
++ unsigned int rx_weight : 5; // 9:5
++ unsigned int tx_weight : 5; // 14:10
++ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold
++ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
++ unsigned int reserved : 7; // 31:25
++#endif
++ } bits;
++} GMAC_AHB_WEIGHT_T;
++/**********************************************************************
++ * the register structure of GMAC
++ **********************************************************************/
++
++/**********************************************************************
++ * GMAC RX FLTR
++ * GMAC0 Offset 0xA00C
++ * GMAC1 Offset 0xE00C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_000c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 27;
++ unsigned int error : 1; /* enable receive of all error frames */
++ unsigned int promiscuous : 1; /* enable receive of all frames */
++ unsigned int broadcast : 1; /* enable receive of broadcast frames */
++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
++#else
++ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
++ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
++ unsigned int broadcast : 1; /* enable receive of broadcast frames */
++ unsigned int promiscuous : 1; /* enable receive of all frames */
++ unsigned int error : 1; /* enable receive of all error frames */
++ unsigned int : 27;
++#endif
++ } bits;
++} GMAC_RX_FLTR_T;
++
++/**********************************************************************
++ * GMAC Configuration 0
++ * GMAC0 Offset 0xA018
++ * GMAC1 Offset 0xE018
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0018
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 2; // 31
++ unsigned int port1_chk_classq : 1; // 29
++ unsigned int port0_chk_classq : 1; // 28
++ unsigned int port1_chk_toeq : 1; // 27
++ unsigned int port0_chk_toeq : 1; // 26
++ unsigned int port1_chk_hwq : 1; // 25
++ unsigned int port0_chk_hwq : 1; // 24
++ unsigned int rx_err_detect : 1; // 23
++ unsigned int ipv6_exthdr_order: 1; // 22
++ unsigned int rxc_inv : 1; // 21
++ unsigned int rgmm_edge : 1; // 20
++ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */
++ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */
++ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */
++ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */
++ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */
++ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */
++ unsigned int sim_test : 1; /* 13: speed up timers in simulation */
++ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */
++ unsigned int dis_bkoff : 1; /* 11: disable back-off function */
++ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */
++ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */
++ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */
++ unsigned int loop_back : 1; /* 2: transmit data loopback enable */
++ unsigned int dis_rx : 1; /* 1: disable receive */
++ unsigned int dis_tx : 1; /* 0: disable transmit */
++#else
++ unsigned int dis_tx : 1; /* 0: disable transmit */
++ unsigned int dis_rx : 1; /* 1: disable receive */
++ unsigned int loop_back : 1; /* 2: transmit data loopback enable */
++ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */
++ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */
++ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */
++ unsigned int dis_bkoff : 1; /* 11: disable back-off function */
++ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */
++ unsigned int sim_test : 1; /* 13: speed up timers in simulation */
++ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */
++ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */
++ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */
++ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */
++ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */
++ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */
++ unsigned int rgmm_edge : 1; // 20
++ unsigned int rxc_inv : 1; // 21
++ unsigned int ipv6_exthdr_order: 1; // 22
++ unsigned int rx_err_detect : 1; // 23
++ unsigned int port0_chk_hwq : 1; // 24
++ unsigned int port1_chk_hwq : 1; // 25
++ unsigned int port0_chk_toeq : 1; // 26
++ unsigned int port1_chk_toeq : 1; // 27
++ unsigned int port0_chk_classq : 1; // 28
++ unsigned int port1_chk_classq : 1; // 29
++ unsigned int reserved : 2; // 31
++#endif
++ } bits;
++} GMAC_CONFIG0_T;
++
++/**********************************************************************
++ * GMAC Configuration 1
++ * GMAC0 Offset 0xA01C
++ * GMAC1 Offset 0xE01C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_001c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int reserved : 16;
++ unsigned int rel_threshold : 8; /* flow control release threshold */
++ unsigned int set_threshold : 8; /* flow control set threshold */
++#else
++ unsigned int set_threshold : 8; /* flow control set threshold */
++ unsigned int rel_threshold : 8; /* flow control release threshold */
++ unsigned int reserved : 16;
++#endif
++ } bits;
++} GMAC_CONFIG1_T;
++
++#define GMAC_FLOWCTRL_SET_MAX 32
++#define GMAC_FLOWCTRL_SET_MIN 0
++#define GMAC_FLOWCTRL_RELEASE_MAX 32
++#define GMAC_FLOWCTRL_RELEASE_MIN 0
++
++/**********************************************************************
++ * GMAC Configuration 2
++ * GMAC0 Offset 0xA020
++ * GMAC1 Offset 0xE020
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0020
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++ unsigned int set_threshold : 16; /* flow control set threshold */
++#else
++ unsigned int set_threshold : 16; /* flow control set threshold */
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++#endif
++ } bits;
++} GMAC_CONFIG2_T;
++
++/**********************************************************************
++ * GMAC Configuration 3
++ * GMAC0 Offset 0xA024
++ * GMAC1 Offset 0xE024
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_0024
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++ unsigned int set_threshold : 16; /* flow control set threshold */
++#else
++ unsigned int set_threshold : 16; /* flow control set threshold */
++ unsigned int rel_threshold : 16; /* flow control release threshold */
++#endif
++ } bits;
++} GMAC_CONFIG3_T;
++
++
++/**********************************************************************
++ * GMAC STATUS
++ * GMAC0 Offset 0xA02C
++ * GMAC1 Offset 0xE02C
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit1_002c
++ {
++#if (BIG_ENDIAN==1)
++ unsigned int : 25;
++ unsigned int mii_rmii : 2; /* PHY interface type */
++ unsigned int reserved : 1;
++ unsigned int duplex : 1; /* duplex mode */
++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
++ unsigned int link : 1; /* link status */
++#else
++ unsigned int link : 1; /* link status */
++ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
++ unsigned int duplex : 1; /* duplex mode */
++ unsigned int reserved : 1;
++ unsigned int mii_rmii : 2; /* PHY interface type */
++ unsigned int : 25;
++#endif
++ } bits;
++} GMAC_STATUS_T;
++
++#define GMAC_SPEED_10 0
++#define GMAC_SPEED_100 1
++#define GMAC_SPEED_1000 2
++
++#define GMAC_PHY_MII 0
++#define GMAC_PHY_GMII 1
++#define GMAC_PHY_RGMII_100 2
++#define GMAC_PHY_RGMII_1000 3
++
++/**********************************************************************
++ * Queue Header
++ * (1) TOE Queue Header
++ * (2) Non-TOE Queue Header
++ * (3) Interrupt Queue Header
++ *
++ * memory Layout
++ * TOE Queue Header
++ * 0x60003000 +---------------------------+ 0x0000
++ * | TOE Queue 0 Header |
++ * | 8 * 4 Bytes |
++ * +---------------------------+ 0x0020
++ * | TOE Queue 1 Header |
++ * | 8 * 4 Bytes |
++ * +---------------------------+ 0x0040
++ * | ...... |
++ * | |
++ * +---------------------------+
++ *
++ * Non TOE Queue Header
++ * 0x60002000 +---------------------------+ 0x0000
++ * | Default Queue 0 Header |
++ * | 2 * 4 Bytes |
++ * +---------------------------+ 0x0008
++ * | Default Queue 1 Header |
++ * | 2 * 4 Bytes |
++ * +---------------------------+ 0x0010
++ * | Classification Queue 0 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+
++ * | Classification Queue 1 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+ (n * 8 + 0x10)
++ * | ... |
++ * | 2 * 4 Bytes |
++ * +---------------------------+ (13 * 8 + 0x10)
++ * | Classification Queue 13 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+ 0x80
++ * | Interrupt Queue 0 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+
++ * | Interrupt Queue 1 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+
++ * | Interrupt Queue 2 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+
++ * | Interrupt Queue 3 |
++ * | 2 * 4 Bytes |
++ * +---------------------------+
++ *
++ **********************************************************************/
++#define TOE_QUEUE_HDR_ADDR(n) (TOE_TOE_QUE_HDR_BASE + n * 32)
++#define TOE_Q_HDR_AREA_END (TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1))
++#define TOE_DEFAULT_Q0_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x00)
++#define TOE_DEFAULT_Q1_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x08)
++#define TOE_CLASS_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x10)
++#define TOE_INTR_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x80)
++#define INTERRUPT_QUEUE_HDR_ADDR(n) (TOE_INTR_Q_HDR_BASE + n * 8)
++#define NONTOE_Q_HDR_AREA_END (INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1))
++/**********************************************************************
++ * TOE Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int base_size;
++} TOE_QHDR0_T;
++
++#define TOE_QHDR0_BASE_MASK (~0x0f)
++
++/**********************************************************************
++ * TOE Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_qhdr1
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int wptr : 16; // bit 31:16
++ unsigned int rptr : 16; // bit 15:0
++#else
++ unsigned int rptr : 16; // bit 15:0
++ unsigned int wptr : 16; // bit 31:16
++#endif
++ } bits;
++} TOE_QHDR1_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 2
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_qhdr2
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int usd : 1; // bit 31 0: if no data assembled yet
++ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack)
++ unsigned int osq : 1; // bit 29 1: out of sequence
++ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header
++ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option
++ unsigned int abn : 1; // bit 25 1: Abnormal case Found
++ unsigned int dack : 1; // bit 24 1: Duplicated ACK
++ unsigned int reserved : 7; // bit 23:17
++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
++#else
++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
++ unsigned int reserved : 7; // bit 23:17
++ unsigned int dack : 1; // bit 24 1: Duplicated ACK
++ unsigned int abn : 1; // bit 25 1: Abnormal case Found
++ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option
++ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header
++ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++ unsigned int osq : 1; // bit 29 1: out of sequence
++ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack)
++ unsigned int usd : 1; // bit 31 0: if no data assembled yet
++#endif
++ } bits;
++} TOE_QHDR2_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 3
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int seq_num;
++} TOE_QHDR3_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 4
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int ack_num;
++} TOE_QHDR4_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 5
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_qhdr5
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int SeqCnt : 16; // bit 31:16
++ unsigned int AckCnt : 16; // bit 15:0
++#else
++ unsigned int AckCnt : 16; // bit 15:0
++ unsigned int SeqCnt : 16; // bit 31:16
++#endif
++ } bits;
++} TOE_QHDR5_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 6
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_qhdr6
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int MaxPktSize : 14; // bit 31:18
++ unsigned int iq_num : 2; // bit 17:16
++ unsigned int WinSize : 16; // bit 15:0
++#else
++ unsigned int WinSize : 16; // bit 15:0
++ unsigned int iq_num : 2; // bit 17:16
++ unsigned int MaxPktSize : 14; // bit 31:18
++#endif
++ } bits;
++} TOE_QHDR6_T;
++
++/**********************************************************************
++ * TOE Queue Header Word 7
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_qhdr7
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int SeqThreshold : 16; // bit 31:16
++ unsigned int AckThreshold : 16; // bit 15:0
++#else
++ unsigned int AckThreshold : 16; // bit 15:0
++ unsigned int SeqThreshold : 16; // bit 31:16
++#endif
++ } bits;
++} TOE_QHDR7_T;
++
++/**********************************************************************
++ * TOE Queue Header
++ **********************************************************************/
++typedef struct
++{
++ TOE_QHDR0_T word0;
++ TOE_QHDR1_T word1;
++ TOE_QHDR2_T word2;
++ TOE_QHDR3_T word3;
++ TOE_QHDR4_T word4;
++ TOE_QHDR5_T word5;
++ TOE_QHDR6_T word6;
++ TOE_QHDR7_T word7;
++} TOE_QHDR_T;
++
++/**********************************************************************
++ * NONTOE Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int base_size;
++} NONTOE_QHDR0_T;
++
++#define NONTOE_QHDR0_BASE_MASK (~0x0f)
++
++/**********************************************************************
++ * NONTOE Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_nonqhdr1
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int wptr : 16; // bit 31:16
++ unsigned int rptr : 16; // bit 15:0
++#else
++ unsigned int rptr : 16; // bit 15:0
++ unsigned int wptr : 16; // bit 31:16
++#endif
++ } bits;
++} NONTOE_QHDR1_T;
++
++/**********************************************************************
++ * Non-TOE Queue Header
++ **********************************************************************/
++typedef struct
++{
++ NONTOE_QHDR0_T word0;
++ NONTOE_QHDR1_T word1;
++} NONTOE_QHDR_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 0
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_intrqhdr0
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped
++ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size
++#else
++ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size
++ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped
++#endif
++ } bits;
++} INTR_QHDR0_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 1
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_intrqhdr1
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack)
++ unsigned int osq : 1; // bit 30 1: out of sequence
++ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header
++ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option
++ unsigned int abn : 1; // bit 26 1: Abnormal case Found
++ unsigned int dack : 1; // bit 25 1: Duplicated ACK
++ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID
++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
++#else
++ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
++ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID
++ unsigned int dack : 1; // bit 25 1: Duplicated ACK
++ unsigned int abn : 1; // bit 26 1: Abnormal case Found
++ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option
++ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header
++ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
++ unsigned int osq : 1; // bit 30 1: out of sequence
++ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack)
++#endif
++ } bits;
++} INTR_QHDR1_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 2
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int seq_num;
++} INTR_QHDR2_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 3
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ unsigned int ack_num;
++} INTR_QHDR3_T;
++
++/**********************************************************************
++ * Interrupt Queue Header Word 4
++ **********************************************************************/
++typedef union
++{
++ unsigned int bits32;
++ struct bit_intrqhdr4
++ {
++#if (BIG_ENDIAN==1)
++
++ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr.
++ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr.
++#else
++ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr.
++ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr.
++#endif
++ } bits;
++} INTR_QHDR4_T;
++
++/**********************************************************************
++ * Interrupt Queue Header
++ **********************************************************************/
++typedef struct
++{
++ INTR_QHDR0_T word0;
++ INTR_QHDR1_T word1;
++ INTR_QHDR2_T word2;
++ INTR_QHDR3_T word3;
++ INTR_QHDR4_T word4;
++ unsigned int word5;
++ unsigned int word6;
++ unsigned int word7;
++} INTR_QHDR_T;
++
++/**********************************************************************
++ * GMAC Conf
++ **********************************************************************/
++typedef struct gmac_conf {
++ struct net_device *dev;
++ int portmap;
++ int vid;
++ int flag; /* 1: active 0: non-active */
++} sys_gmac_conf;
++
++/**********************************************************************
++ * GMAC private data
++ **********************************************************************/
++typedef struct {
++ unsigned int rwptr_reg;
++ unsigned int desc_base;
++ unsigned int total_desc_num;
++ unsigned short finished_idx;
++ GMAC_TXDESC_T *curr_tx_desc;
++ GMAC_TXDESC_T *curr_finished_desc;
++ struct sk_buff *tx_skb[TX_DESC_NUM];
++ unsigned long total_sent;
++ unsigned long total_finished;
++ unsigned long intr_cnt;
++} GMAC_SWTXQ_T;
++
++typedef struct {
++ unsigned int desc_base;
++ unsigned long eof_cnt;
++} GMAC_HWTXQ_T;
++
++typedef struct gmac_private{
++ struct net_device *dev;
++ unsigned int existed;
++ unsigned int port_id; // 0 or 1
++ unsigned int base_addr;
++ unsigned int dma_base_addr;
++ unsigned char *mac_addr1;
++ unsigned char *mac_addr2;
++ unsigned int swtxq_desc_base;
++ unsigned int hwtxq_desc_base;
++ GMAC_SWTXQ_T swtxq[TOE_SW_TXQ_NUM];
++ GMAC_HWTXQ_T hwtxq[TOE_HW_TXQ_NUM];
++ NONTOE_QHDR_T *default_qhdr;
++ unsigned int default_desc_base;
++ unsigned int default_desc_num;
++ unsigned int rx_curr_desc;
++ DMA_RWPTR_T rx_rwptr;
++ struct sk_buff *curr_rx_skb;
++ dma_addr_t default_desc_base_dma;
++ dma_addr_t swtxq_desc_base_dma;
++ dma_addr_t hwtxq_desc_base_dma;
++ unsigned int irq;
++ unsigned int flow_control_enable ;
++ unsigned int pre_phy_status;
++ unsigned int full_duplex_cfg;
++ unsigned int speed_cfg;
++ unsigned int auto_nego_cfg;
++ unsigned int full_duplex_status;
++ unsigned int speed_status;
++ unsigned int phy_mode; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
++ unsigned int phy_addr;
++ unsigned int intr0_enabled; // 1: enabled
++ unsigned int intr1_enabled; // 1: enabled
++ unsigned int intr2_enabled; // 1: enabled
++ unsigned int intr3_enabled; // 1: enabled
++ unsigned int intr4_enabled; // 1: enabled
++// unsigned int intr4_enabled_1; // 1: enabled
++ unsigned int intr0_selected; // 1: selected
++ unsigned int intr1_selected; // 1: selected
++ unsigned int intr2_selected; // 1: selected
++ unsigned int intr3_selected; // 1: selected
++ unsigned int intr4_selected; // 1: selected
++ // void (*gmac_rcv_handler)(struct sk_buff *, int);
++ struct net_device_stats ifStatics;
++ unsigned long txDerr_cnt[GMAC_NUM];
++ unsigned long txPerr_cnt[GMAC_NUM];
++ unsigned long RxDerr_cnt[GMAC_NUM];
++ unsigned long RxPerr_cnt[GMAC_NUM];
++ unsigned int isr_rx_cnt;
++ unsigned int isr_tx_cnt;
++ unsigned long rx_discard;
++ unsigned long rx_error;
++ unsigned long rx_mcast;
++ unsigned long rx_bcast;
++ unsigned long rx_status_cnt[8];
++ unsigned long rx_chksum_cnt[8];
++ unsigned long rx_sta1_ucast; // for STA 1 MAC Address
++ unsigned long rx_sta2_ucast; // for STA 2 MAC Address
++ unsigned long mib_full_cnt;
++ unsigned long rx_pause_on_cnt;
++ unsigned long tx_pause_on_cnt;
++ unsigned long rx_pause_off_cnt;
++ unsigned long tx_pause_off_cnt;
++ unsigned long rx_overrun_cnt;
++ unsigned long status_changed_cnt;
++ unsigned long default_q_cnt;
++ unsigned long hw_fq_empty_cnt;
++ unsigned long sw_fq_empty_cnt;
++ unsigned long default_q_intr_cnt;
++ pid_t thr_pid;
++ wait_queue_head_t thr_wait;
++ struct completion thr_exited;
++ spinlock_t lock;
++ int time_to_die;
++ int operation;
++#ifdef SL351x_GMAC_WORKAROUND
++ unsigned long short_frames_cnt;
++#endif
++}GMAC_INFO_T ;
++
++typedef struct toe_private {
++ unsigned int swfq_desc_base;
++ unsigned int hwfq_desc_base;
++ unsigned int hwfq_buf_base;
++// unsigned int toe_desc_base[TOE_TOE_QUEUE_NUM];
++// unsigned int toe_desc_num;
++// unsigned int class_desc_base;
++// unsigned int class_desc_num;
++// unsigned int intr_desc_base;
++// unsigned int intr_desc_num;
++// unsigned int intr_buf_base;
++ DMA_RWPTR_T fq_rx_rwptr;
++ GMAC_INFO_T gmac[GMAC_NUM];
++ dma_addr_t sw_freeq_desc_base_dma;
++ dma_addr_t hw_freeq_desc_base_dma;
++ dma_addr_t hwfq_buf_base_dma;
++ dma_addr_t hwfq_buf_end_dma;
++// dma_addr_t toe_desc_base_dma[TOE_TOE_QUEUE_NUM];
++// dma_addr_t class_desc_base_dma;
++// dma_addr_t intr_desc_base_dma;
++// dma_addr_t intr_buf_base_dma;
++// unsigned long toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM];
++// unsigned long toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM];
++// unsigned long toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM];
++// unsigned long class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM];
++// unsigned long class_q_intr_cnt[TOE_CLASS_QUEUE_NUM];
++} TOE_INFO_T;
++
++extern TOE_INFO_T toe_private_data;
++
++#define GMAC_PORT0 0
++#define GMAC_PORT1 1
++/**********************************************************************
++ * PHY Definition
++ **********************************************************************/
++#define HPHY_ADDR 0x01
++#define GPHY_ADDR 0x02
++
++enum phy_state
++{
++ LINK_DOWN = 0,
++ LINK_UP = 1
++};
++
++/* transmit timeout value */
++
++#endif //_GMAC_SL351x_H
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,365 @@
++/*-----------------------------------------------------------------------------------
++* sl351x_hash_cfg.h
++*
++* Description:
++*
++* History:
++*
++* 9/14/2005 Gary Chen Create
++*
++*-------------------------------------------------------------------------------------*/
++#ifndef _SL351x_HASH_CFG_H_
++#define _SL351x_HASH_CFG_H_ 1
++
++// #define NAT_DEBUG_MSG 1
++// #define DEBUG_NAT_MIXED_HW_SW_TX 1
++#ifdef DEBUG_NAT_MIXED_HW_SW_TX
++ // #define NAT_DEBUG_LAN_HASH_TIMEOUT 1
++ // #define NAT_DEBUG_WAN_HASH_TIMEOUT 1
++#endif
++
++#define IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d)
++#define IPIV1(a) ((a>>24)&0xff)
++#define IPIV2(a) ((a>>16)&0xff)
++#define IPIV3(a) ((a>>8)&0xff)
++#define IPIV4(a) ((a)&0xff)
++
++#define HASH_MAX_BYTES 64 // 128
++#define HASH_ACTION_DWORDS 9
++#define HASH_MAX_DWORDS (HASH_MAX_BYTES / sizeof(u32))
++#define HASH_MAX_KEY_DWORD (HASH_MAX_DWORDS - HASH_ACTION_DWORDS)
++#define HASH_INIT_KEY 0x534C4F52
++#define HASH_BITS 12 // 12 : Normal, 7: Simulation
++#define HASH_TOTAL_ENTRIES (1 << HASH_BITS)
++#define HASH_MAX_ENTRIES (1 << 12)
++#define HASH_TOE_ENTRIES (HASH_TOTAL_ENTRIES >> 5)
++#define HASH_BITS_MASK ((1 << HASH_BITS) - 1)
++
++#define hash_lock(lock) // spin_lock_bh(lock)
++#define hash_unlock(lock) // spin_unlock_bh(lock)
++
++/*----------------------------------------------------------------------
++ * special macro
++ ----------------------------------------------------------------------*/
++#define HASH_PUSH_WORD(cp, data) {*cp++ = (((u16)(data)) ) & 0xff; \
++ *cp++ = (((u16)(data)) >> 8) & 0xff;}
++#define HASH_PUSH_DWORD(cp, data) {*cp++ = (u8)(((u32)(data)) ) & 0xff; \
++ *cp++ = (u8)(((u32)(data)) >> 8) & 0xff; \
++ *cp++ = (u8)(((u32)(data)) >> 16) & 0xff; \
++ *cp++ = (u8)(((u32)(data)) >> 24) & 0xff;}
++#define HASH_PUSH_BYTE(cp, data) {*cp++ = ((u8)(data)) & 0xff;}
++
++/*----------------------------------------------------------------------
++ * key
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u8 port;
++ u16 Ethertype;
++ u8 da[6];
++ u8 sa[6];
++ u16 pppoe_sid;
++ u16 vlan_id;
++ u8 ipv4_hdrlen;
++ u8 ip_tos;
++ u8 ip_protocol;
++ u32 ipv6_flow_label;
++ u8 sip[16];
++ u8 dip[16];
++ //__u32 sip[4];
++ //__u32 dip[4];
++ u8 l4_bytes[24];
++ u8 l7_bytes[24];
++ u8 ipv6; // 1: IPv6, 0: IPV4
++} ENTRY_KEY_T;
++
++/*----------------------------------------------------------------------
++ * key for NAT
++ * Note: packed
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u16 Ethertype; // not used
++ u8 port_id;
++ u8 rule_id;
++ u8 ip_protocol;
++ u8 reserved1; // ip_tos, not used
++ u16 reserved2; // not used
++ u32 sip;
++ u32 dip;
++ u16 sport;
++ u16 dport;
++} NAT_KEY_T;
++
++#define NAT_KEY_DWORD_SIZE (sizeof(NAT_KEY_T)/sizeof(u32))
++#define NAT_KEY_SIZE (sizeof(NAT_KEY_T))
++
++/*----------------------------------------------------------------------
++ * key for NAT
++ * Note: packed
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u16 Ethertype; // not used
++ u8 port_id;
++ u8 rule_id;
++ u8 ip_protocol;
++ u8 reserved1; // ip_tos, not used
++ u16 reserved2; // not used
++ u32 sip;
++ u32 dip;
++ u16 reserved3;
++ u16 protocol;
++ u16 reserved4;
++ u16 call_id;
++} GRE_KEY_T;
++
++#define GRE_KEY_DWORD_SIZE (sizeof(GRE_KEY_T)/sizeof(u32))
++#define GRE_KEY_SIZE (sizeof(GRE_KEY_T))
++/*----------------------------------------------------------------------
++ * key present or not
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u32 port : 1;
++ u32 Ethertype : 1;
++ u32 da : 1;
++ u32 sa : 1;
++ u32 pppoe_sid : 1;
++ u32 vlan_id : 1;
++ u32 ipv4_hdrlen : 1;
++ u32 ip_tos : 1;
++ u32 ip_protocol : 1;
++ u32 ipv6_flow_label : 1;
++ u32 sip : 1;
++ u32 dip : 1;
++ u32 l4_bytes_0_3 : 1;
++ u32 l4_bytes_4_7 : 1;
++ u32 l4_bytes_8_11 : 1;
++ u32 l4_bytes_12_15 : 1;
++ u32 l4_bytes_16_19 : 1;
++ u32 l4_bytes_20_23 : 1;
++ u32 l7_bytes_0_3 : 1;
++ u32 l7_bytes_4_7 : 1;
++ u32 l7_bytes_8_11 : 1;
++ u32 l7_bytes_12_15 : 1;
++ u32 l7_bytes_16_19 : 1;
++ u32 l7_bytes_20_23 : 1;
++ u32 reserved : 8;
++} KEY_FIELD_T;
++
++/*----------------------------------------------------------------------
++ * action
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u32 reserved0 : 5; // bit 0:4
++ u32 pppoe : 2; // bit 5:6
++ u32 vlan : 2; // bit 7:8
++ u32 sa : 1; // bit 9
++ u32 da : 1; // bit 10
++ u32 Dport : 1; // bit 11
++ u32 Sport : 1; // bit 12
++ u32 Dip : 1; // bit 13
++ u32 Sip : 1; // bit 14
++ u32 sw_id : 1; // bit 15
++ u32 frag : 1; // bit 16
++ u32 option : 1; // bit 17
++ u32 ttl_0 : 1; // bit 18
++ u32 ttl_1 : 1; // bit 19
++ u32 mtu : 1; // bit 20
++ u32 exception : 1; // bit 21
++ u32 srce_qid : 1; // bit 22
++ u32 discard : 1; // bit 23
++ u32 dest_qid : 8; // bit 24:31
++} ENTRY_ACTION_T;
++
++#define ACTION_DISCARD_BIT BIT(23)
++#define ACTION_SRCE_QID_BIT BIT(22)
++#define ACTION_EXCEPTION_BIT BIT(21)
++#define ACTION_MTU_BIT BIT(20)
++#define ACTION_TTL_1_BIT BIT(19)
++#define ACTION_TTL_0_BIT BIT(18)
++#define ACTION_IP_OPTION BIT(17)
++#define ACTION_FRAG_BIT BIT(16)
++#define ACTION_SWID_BIT BIT(15)
++#define ACTION_SIP_BIT BIT(14)
++#define ACTION_DIP_BIT BIT(13)
++#define ACTION_SPORT_BIT BIT(12)
++#define ACTION_DPORT_BIT BIT(11)
++#define ACTION_DA_BIT BIT(10)
++#define ACTION_SA_BIT BIT(9)
++#define ACTION_VLAN_DEL_BIT BIT(8)
++#define ACTION_VLAN_INS_BIT BIT(7)
++#define ACTION_PPPOE_DEL_BIT BIT(6)
++#define ACTION_PPPOE_INS_BIT BIT(5)
++#define ACTION_L4_THIRD_BIT BIT(4)
++#define ACTION_L4_FOURTH_BIT BIT(3)
++
++#define NAT_ACTION_BITS (ACTION_SRCE_QID_BIT | ACTION_EXCEPTION_BIT | \
++ ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | \
++ ACTION_IP_OPTION | ACTION_FRAG_BIT | \
++ ACTION_DA_BIT | ACTION_SA_BIT)
++#define NAT_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT)
++#define NAT_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT)
++#define NAT_PPPOE_LAN2WAN_ACTIONS (NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
++#define NAT_PPPOE_WAN2LAN_ACTIONS (NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
++#define NAT_PPTP_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT)
++#define NAT_PPTP_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT)
++#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS (NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
++#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS (NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
++
++/*----------------------------------------------------------------------
++ * parameter
++ ----------------------------------------------------------------------*/
++typedef struct {
++ u8 da[6];
++ u8 sa[6];
++ u16 vlan;
++ u16 pppoe;
++ u32 Sip;
++ u32 Dip;
++ u16 Sport;
++ u16 Dport;
++ u16 sw_id;
++ u16 mtu;
++} ENTRY_PARAM_T;
++
++/*----------------------------------------------------------------------
++ * Hash Entry
++ ----------------------------------------------------------------------*/
++typedef struct {
++ char rule;
++ ENTRY_KEY_T key;
++ KEY_FIELD_T key_present;
++ ENTRY_ACTION_T action;
++ ENTRY_PARAM_T param;
++ int index;
++ int total_dwords;
++} HASH_ENTRY_T;
++
++/*----------------------------------------------------------------------
++ * NAT Hash Entry
++ ----------------------------------------------------------------------*/
++typedef struct {
++ short counter;
++ short interval;
++} HASH_TIMEOUT_T;
++
++/*----------------------------------------------------------------------
++ * NAT Hash Entry for TCP/UDP protocol
++ ----------------------------------------------------------------------*/
++typedef struct {
++ NAT_KEY_T key;
++ union {
++ u32 dword;
++ ENTRY_ACTION_T bits;
++ } action;
++ ENTRY_PARAM_T param;
++ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently
++} NAT_HASH_ENTRY_T;
++
++#define NAT_HASH_ENTRY_SIZE (sizeof(NAT_HASH_ENTRY_T))
++
++/*----------------------------------------------------------------------
++ * GRE Hash Entry for PPTP/GRE protocol
++ ----------------------------------------------------------------------*/
++typedef struct {
++ GRE_KEY_T key;
++ union {
++ u32 dword;
++ ENTRY_ACTION_T bits;
++ } action;
++ ENTRY_PARAM_T param;
++ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently
++} GRE_HASH_ENTRY_T;
++
++#define GRE_HASH_ENTRY_SIZE (sizeof(GRE_HASH_ENTRY_T))
++
++/*----------------------------------------------------------------------
++ * External Variables
++ ----------------------------------------------------------------------*/
++extern char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
++extern u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
++/*----------------------------------------------------------------------
++* hash_get_valid_flag
++*----------------------------------------------------------------------*/
++static inline int hash_get_valid_flag(int index)
++{
++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++
++#ifdef SL351x_GMAC_WORKAROUND
++ if (index >= (0x80 * 8) && index < (0x8c * 8))
++ return 1;
++#endif
++ return (hash_valid_bits_ptr[index/32] & (1 << (index %32)));
++}
++
++/*----------------------------------------------------------------------
++* hash_get_nat_owner_flag
++*----------------------------------------------------------------------*/
++static inline int hash_get_nat_owner_flag(int index)
++{
++ return (hash_nat_owner_bits[index/32] & (1 << (index %32)));
++}
++
++/*----------------------------------------------------------------------
++* hash_validate_entry
++*----------------------------------------------------------------------*/
++static inline void hash_validate_entry(int index)
++{
++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++ register int ptr = index/32, bits = 1 << (index %32);
++
++ hash_valid_bits_ptr[ptr] |= bits;
++}
++
++/*----------------------------------------------------------------------
++* hash_invalidate_entry
++*----------------------------------------------------------------------*/
++static inline void hash_invalidate_entry(int index)
++{
++ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
++ register int ptr = index/32, bits = 1 << (index %32);
++
++ hash_valid_bits_ptr[ptr] &= ~(bits);
++}
++
++/*----------------------------------------------------------------------
++* hash_nat_enable_owner
++*----------------------------------------------------------------------*/
++static inline void hash_nat_enable_owner(int index)
++{
++ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
++}
++
++/*----------------------------------------------------------------------
++* hash_nat_disable_owner
++*----------------------------------------------------------------------*/
++static inline void hash_nat_disable_owner(int index)
++{
++ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
++}
++
++/*----------------------------------------------------------------------
++* hash_get_entry
++*----------------------------------------------------------------------*/
++static inline void *hash_get_entry(int index)
++{
++ return (void*) &hash_tables[index][0];
++}
++
++/*----------------------------------------------------------------------
++* Functions
++*----------------------------------------------------------------------*/
++extern int hash_add_entry(HASH_ENTRY_T *entry);
++extern void sl351x_hash_init(void);
++extern void hash_set_valid_flag(int index, int valid);
++extern void hash_set_nat_owner_flag(int index, int valid);
++extern void *hash_get_entry(int index);
++extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry);
++extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry);
++extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key);
++extern int hash_add_entry(HASH_ENTRY_T *entry);
++extern u16 hash_crc16(u16 crc, u8 *datap, u32 len);
++extern u16 hash_gen_crc16(u8 *datap, u32 len);
++
++#endif // _SL351x_HASH_CFG_H_
++
++
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,211 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* sl_nat_cfg.h
++*
++* Description:
++* - Define the Device Control Commands for NAT Configuration
++*
++* History:
++*
++* 4/28/2006 Gary Chen Create
++*
++*-----------------------------------------------------------------------------*/
++#ifndef _SL351x_NAT_CFG_H_
++#define _SL351x_NAT_CFG_H_ 1
++
++/*----------------------------------------------------------------------
++* Confiuration
++*----------------------------------------------------------------------*/
++#ifdef CONFIG_NETFILTER
++#define CONFIG_SL351x_NAT 1
++#undef CONFIG_SL351x_NAT
++#undef CONFIG_SL351x_SYSCTL
++#endif
++#define CONFIG_NAT_MAX_IP_NUM 4 // per device (eth0 or eth1)
++#define CONFIG_NAT_MAX_XPORT 64
++#define CONFIG_NAT_MAX_WRULE 16 // per Queue
++#define CONFIG_NAT_TXQ_NUM 4
++/*----------------------------------------------------------------------
++* Command set
++*----------------------------------------------------------------------*/
++#define SIOCDEVSL351x SIOCDEVPRIVATE // 0x89F0
++#define NATSSTATUS 0
++#define NATGSTATUS 1
++#define NATSETPORT 2
++#define NATGETPORT 3
++#define NATADDIP 4
++#define NATDELIP 5
++#define NATGETIP 6
++#define NATAXPORT 7
++#define NATDXPORT 8
++#define NATGXPORT 9
++#define NATSWEIGHT 10
++#define NATGWEIGHT 11
++#define NATAWRULE 12
++#define NATDWRULE 13
++#define NATGWRULE 14
++#define NATSDEFQ 15
++#define NATGDEFQ 16
++#define NATRMIPCFG 17 // remove IP config
++#define NATTESTENTRY 18
++#define NATSETMEM 19
++#define NATSHOWMEM 20
++/*----------------------------------------------------------------------
++* Command Structure
++*----------------------------------------------------------------------*/
++// Common Header
++typedef struct {
++ unsigned short cmd; // command ID
++ unsigned short len; // data length, excluding this header
++} NATCMD_HDR_T;
++
++// NATSSTATUS & NATGSTATUS commands
++typedef struct {
++ unsigned char enable;
++} NAT_STATUS_T;
++
++// NATSETPORT & NATGETPORT commands
++typedef struct {
++ unsigned char portmap;
++} NAT_PORTCFG_T;
++
++typedef struct {
++ unsigned int ipaddr;
++ unsigned int netmask;
++} NAT_IP_ENTRY_T;
++
++// NATADDIP & NATDELIP commands
++typedef struct {
++ NAT_IP_ENTRY_T entry;
++} NAT_IPCFG_T;
++
++// NATGETIP command
++typedef struct {
++ unsigned int total;
++ NAT_IP_ENTRY_T entry[CONFIG_NAT_MAX_IP_NUM];
++} NAT_IPCFG_ALL_T;
++
++typedef struct {
++ unsigned int protocol;
++ unsigned short sport_start;
++ unsigned short sport_end;
++ unsigned short dport_start;
++ unsigned short dport_end;
++} NAT_XPORT_ENTRY_T;
++
++// NATAXPORT & NATDXPORT Commands
++typedef struct {
++ NAT_XPORT_ENTRY_T entry;
++} NAT_XPORT_T;
++
++// NATGXPORT Command
++typedef struct {
++ unsigned int total;
++ NAT_XPORT_ENTRY_T entry[CONFIG_NAT_MAX_XPORT];
++} NAT_XPORT_ALL_T;
++
++// NATSWEIGHT & NATGWEIGHT Commands
++typedef struct {
++ unsigned char weight[CONFIG_NAT_TXQ_NUM];
++} NAT_WEIGHT_T;
++
++typedef struct {
++ unsigned int protocol;
++ unsigned int sip_start;
++ unsigned int sip_end;
++ unsigned int dip_start;
++ unsigned int dip_end;
++ unsigned short sport_start;
++ unsigned short sport_end;
++ unsigned short dport_start;
++ unsigned short dport_end;
++} NAT_WRULE_ENTRY_T;
++
++// NATAWRULE & NATDWRULE Commands
++typedef struct {
++ unsigned int qid;
++ NAT_WRULE_ENTRY_T entry;
++} NAT_WRULE_T;
++
++// NATGWRULE Command
++typedef struct {
++ unsigned int total;
++ NAT_WRULE_ENTRY_T entry[CONFIG_NAT_MAX_WRULE];
++} NAT_WRULE_ALL_T;
++
++// NATSDEFQ & NATGDEFQ commands
++typedef struct {
++ unsigned int qid;
++} NAT_QUEUE_T;
++
++// NATTESTENTRY
++typedef struct {
++ u_int16_t cmd; // command ID
++ u_int16_t len; // data length, excluding this header
++ u_int8_t init_enable;
++} NAT_TESTENTRY_T;
++
++typedef union
++{
++ NAT_STATUS_T status;
++ NAT_PORTCFG_T portcfg;
++ NAT_IPCFG_T ipcfg;
++ NAT_XPORT_T xport;
++ NAT_WEIGHT_T weight;
++ NAT_WRULE_T wrule;
++ NAT_QUEUE_T queue;
++ NAT_TESTENTRY_T init_entry;
++} NAT_REQ_E;
++
++/*----------------------------------------------------------------------
++* NAT Configuration
++* - Used by driver only
++*----------------------------------------------------------------------*/
++typedef struct {
++ unsigned int enabled;
++ unsigned int init_enabled;
++ unsigned int tcp_udp_rule_id;
++ unsigned int gre_rule_id;
++ unsigned int lan_port;
++ unsigned int wan_port;
++ unsigned int default_hw_txq;
++ short tcp_tmo_interval;
++ short udp_tmo_interval;
++ short gre_tmo_interval;
++ NAT_IPCFG_ALL_T ipcfg[2]; // LAN/WAN port
++ NAT_XPORT_ALL_T xport;
++ NAT_WEIGHT_T weight;
++ NAT_WRULE_ALL_T wrule[CONFIG_NAT_TXQ_NUM];
++} NAT_CFG_T;
++
++/*----------------------------------------------------------------------
++* NAT Control Block
++* - Used by driver only
++* - Stores LAN-IN or WAN-IN information
++* - WAN-OUT and LAN-OUT driver use them to build up a hash entry
++* - NOTES: To update this data structure, MUST take care of alignment issue
++* - MUST make sure that the size of skbuff structure must
++* be larger than (40 + sizof(NAT_CB_T))
++*----------------------------------------------------------------------*/
++typedef struct {
++ unsigned short tag;
++ unsigned char sa[6];
++ unsigned int sip;
++ unsigned int dip;
++ unsigned short sport;
++ unsigned short dport;
++ unsigned char pppoe_frame;
++ unsigned char state; // same to enum tcp_conntrack
++ unsigned char reserved[2];
++} NAT_CB_T;
++
++#define NAT_CB_TAG 0x4C53 // "SL"
++#define NAT_CB_SIZE sizeof(NAT_CB_T)
++// #define NAT_SKB_CB(skb) (NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3) // for align 4
++#define NAT_SKB_CB(skb) (NAT_CB_T *)&((skb)->cb[40]) // for align 4
++
++#endif // _SL351x_NAT_CFG_H_
++
++
++
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_toe.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_toe.h 2008-03-15 16:57:25.854761029 +0200
+@@ -0,0 +1,88 @@
++/**************************************************************************
++* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
++*--------------------------------------------------------------------------
++* Name : sl351x_toe.h
++* Description :
++* Define for TOE driver of Storlink SL351x
++*
++* History
++*
++* Date Writer Description
++*----------------------------------------------------------------------------
++* Xiaochong Create
++*
++****************************************************************************/
++#ifndef __SL351x_TOE_H
++#define __SL351x_TOE_H 1
++#include <net/sock.h>
++#include <asm/arch/sl351x_gmac.h>
++#include <linux/timer.h>
++#include <linux/netdevice.h>
++#include <linux/ip.h>
++#include <linux/if_ether.h>
++/*
++ * TOE_CONN_T is data structure of tcp connection info, used at both
++ * device layer and kernel tcp layer
++ * skb is the jumbo frame
++ */
++
++struct toe_conn{
++ __u8 qid; // connection qid 0~63.
++ __u8 ip_ver; // 0: not used; 4: ipv4; 6: ipv6.
++ /* hash key of the connection */
++ __u16 source;
++ __u16 dest;
++ __u32 saddr[4];
++ __u32 daddr[4];
++
++ __u32 seq;
++ __u32 ack_seq;
++
++ /* these fields are used to set TOE QHDR */
++ __u32 ack_threshold;
++ __u32 seq_threshold;
++ __u16 max_pktsize;
++
++ /* used by sw toe, accumulated ack_seq of ack frames */
++ __u16 ack_cnt;
++ /* used by sw toe, accumulated data frames held at driver */
++ __u16 cur_pktsize;
++
++ __u8 status;
++#define TCP_CONN_UNDEFINE 0X00
++#define TCP_CONN_CREATION 0X01
++#define TCP_CONN_CONNECTING 0X02
++#define TCP_CONN_ESTABLISHED 0X04
++#define TCP_CONN_RESET 0X08 // this is used for out-of-order
++ // or congestion window is small
++#define TCP_CONN_CLOSING 0X10
++#define TCP_CONN_CLOSED 0x11
++
++ __u16 hash_entry_index; /* associated hash entry */
++
++ // one timer per connection. Otherwise all connections should be scanned
++ // in a timeout interrupt, and timeout interrupt is triggered no matter
++ // a connection is actually timeout or not.
++ struct timer_list rx_timer;
++ unsigned long last_rx_jiffies;
++ GMAC_INFO_T *gmac;
++ struct net_device *dev;
++
++ // for generating pure ack frame.
++ struct ethhdr l2_hdr;
++ struct iphdr l3_hdr;
++
++ spinlock_t conn_lock;
++ DMA_RWPTR_T toeq_rwptr;
++ GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *curr_rx_skb;
++};
++
++struct jumbo_frame {
++ struct sk_buff *skb0; // the head of jumbo frame
++ struct sk_buff *tail; // the tail of jumbo frame
++ struct iphdr *iphdr0; // the ip hdr of skb0.
++ struct tcphdr *tcphdr0; // the tcp hdr of skb0.
++};
++
++#endif // __SL351x_TOE_H
diff --git a/target/linux/storm/patches/1003-gmac_one_phy.patch b/target/linux/storm/patches/1003-gmac_one_phy.patch
new file mode 100644
index 0000000000..4697a2b34c
--- /dev/null
+++ b/target/linux/storm/patches/1003-gmac_one_phy.patch
@@ -0,0 +1,13 @@
+Index: linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h
+===================================================================
+--- linux-2.6.x.orig/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:18:28.540865746 +0300
++++ linux-2.6.x/include/asm-arm/arch-sl2312/sl351x_gmac.h 2007-09-04 14:15:55.584200244 +0300
+@@ -21,7 +21,7 @@
+ #undef BIG_ENDIAN
+ #define BIG_ENDIAN 0
+ #define GMAC_DEBUG 1
+-#define GMAC_NUM 2
++#define GMAC_NUM 1
+ //#define L2_jumbo_frame 1
+
+ #define _PACKED_ __attribute__ ((aligned(1), packed))
diff --git a/target/linux/storm/patches/1004-gmac-enable-napi.patch b/target/linux/storm/patches/1004-gmac-enable-napi.patch
new file mode 100644
index 0000000000..6317160a09
--- /dev/null
+++ b/target/linux/storm/patches/1004-gmac-enable-napi.patch
@@ -0,0 +1,83 @@
+Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 16:59:23.361457295 +0200
++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200
+@@ -68,9 +68,11 @@
+ #include <linux/ip.h>
+ #endif
+
++/* Enables NAPI unconditionally */
++#define CONFIG_SL_NAPI 1
++
+ // #define SL351x_TEST_WORKAROUND
+ #ifdef CONFIG_SL351x_NAT
+-#define CONFIG_SL_NAPI 1
+ #endif
+ #define GMAX_TX_INTR_DISABLED 1
+ #define DO_HW_CHKSUM 1
+@@ -124,12 +126,17 @@
+ *************************************************************/
+ static int gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+-//static int do_again = 0;
++static int do_again = 0;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+
+ static unsigned int next_tick = 3 * HZ;
+-static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
++static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {
++ {0x00,0x11,0x11,0x87,0x87,0x87},
++#if GMAC_NUM != 1
++ {0x00,0x22,0x22,0xab,0xab,0xab}
++#endif
++};
+
+ #undef CONFIG_SL351x_RXTOE
+ extern NAT_CFG_T nat_cfg;
+@@ -2443,7 +2450,8 @@
+ toe = (TOE_INFO_T *)&toe_private_data;
+ // handle NAPI
+ #ifdef CONFIG_SL_NAPI
+-if (storlink_ctl.pauseoff == 1)
++ /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
++if (1)
+ {
+ /* disable GMAC interrupt */
+ //toe_gmac_disable_interrupt(tp->irq);
+@@ -2530,7 +2538,7 @@
+ {
+ if (likely(netif_rx_schedule_prep(dev)))
+ {
+- unsigned int data32;
++ // unsigned int data32;
+ // disable GMAC-0 rx interrupt
+ // class-Q & TOE-Q are implemented in future
+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -2563,7 +2571,7 @@
+ {
+ if (likely(netif_rx_schedule_prep(dev)))
+ {
+- unsigned int data32;
++ // unsigned int data32;
+ // disable GMAC-0 rx interrupt
+ // class-Q & TOE-Q are implemented in future
+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -4217,7 +4225,7 @@
+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
+ unsigned int status4;
+ volatile DMA_RWPTR_T fq_rwptr;
+- int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
++ // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
+ //unsigned long rx_old_bytes;
+ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+ //unsigned long long rx_time;
+@@ -4479,7 +4487,7 @@
+
+ if (rwptr.bits.rptr == rwptr.bits.wptr)
+ {
+- unsigned int data32;
++ // unsigned int data32;
+ //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+
+ /* Receive descriptor is empty now */
diff --git a/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch b/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
new file mode 100644
index 0000000000..b072fe20df
--- /dev/null
+++ b/target/linux/storm/patches/1005-gmac-napi-mask-intrs.patch
@@ -0,0 +1,250 @@
+Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 17:00:32.365389612 +0200
++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:00:55.366700383 +0200
+@@ -127,6 +127,7 @@
+ static int gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+ static int do_again = 0;
++static int rx_poll_enabled;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+
+@@ -1065,7 +1066,8 @@
+ tp->intr3_enabled = 0xffffffff;
+ tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
+ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
+- tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
++ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
++ // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
+
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
+@@ -1115,7 +1117,7 @@
+ tp->intr3_enabled |= 0xffffffff;
+ tp->intr4_selected |= CLASS_RX_FULL_INT_BITS |
+ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
+- tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT;
++ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
+ }
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
+@@ -2408,7 +2410,7 @@
+ // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
+
+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- spin_lock_irqsave(&gmac_fq_lock, flags);
++ // spin_lock_irqsave(&gmac_fq_lock, flags);
+ //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+ // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
+ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+@@ -2428,10 +2430,47 @@
+ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
+ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
+ }
+- spin_unlock_irqrestore(&gmac_fq_lock, flags);
++ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
+ }
+ // EXPORT_SYMBOL(toe_gmac_fill_free_q);
+
++static void gmac_registers(const char *message)
++{
++ unsigned int status0;
++ unsigned int status1;
++ unsigned int status2;
++ unsigned int status3;
++ unsigned int status4;
++
++ printk("%s\n", message);
++
++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++
++ printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++ status0, status1, status2, status3, status4);
++
++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++ printk("mask : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++ status0, status1, status2, status3, status4);
++
++ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
++ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++ status0, status1, status2, status3, status4);
++}
+ /*----------------------------------------------------------------------
+ * toe_gmac_interrupt
+ *----------------------------------------------------------------------*/
+@@ -2492,6 +2531,7 @@
+ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+ if (status4)
+ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
+ #if 0
+ /* handle freeq interrupt first */
+ if (status4 & tp->intr4_enabled) {
+@@ -2536,10 +2576,31 @@
+ }
+ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
+ {
+- if (likely(netif_rx_schedule_prep(dev)))
++ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+ {
+- // unsigned int data32;
+- // disable GMAC-0 rx interrupt
++ unsigned int data32;
++
++ if (rx_poll_enabled)
++ gmac_registers("check #1");
++
++ BUG_ON(rx_poll_enabled == 1);
++
++#if 0
++ /* Masks GMAC-0 rx interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ data32 &= ~(DEFAULT_Q0_INT_BIT);
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++ /* Masks GMAC-0 queue empty interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++ data32 &= ~DEFAULT_Q0_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ data32 &= ~DEFAULT_Q0_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++#endif
++
+ // class-Q & TOE-Q are implemented in future
+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ //data32 &= ~DEFAULT_Q0_INT_BIT;
+@@ -2549,7 +2610,8 @@
+ //tp->total_q_cnt_napi=0;
+ //rx_time = jiffies;
+ //rx_old_bytes = isPtr->rx_bytes;
+- __netif_rx_schedule(dev);
++ __netif_rx_schedule(dev);
++ rx_poll_enabled = 1;
+ }
+ }
+ }
+@@ -2569,9 +2631,31 @@
+
+ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+ {
+- if (likely(netif_rx_schedule_prep(dev)))
++ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+ {
+- // unsigned int data32;
++ unsigned int data32;
++
++ if (rx_poll_enabled)
++ gmac_registers("check #2");
++
++ BUG_ON(rx_poll_enabled == 1);
++
++#if 0
++ /* Masks GMAC-1 rx interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ data32 &= ~(DEFAULT_Q1_INT_BIT);
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++ /* Masks GMAC-1 queue empty interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++ data32 &= ~DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ data32 &= ~DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++#endif
++
+ // disable GMAC-0 rx interrupt
+ // class-Q & TOE-Q are implemented in future
+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+@@ -2583,9 +2667,13 @@
+ //rx_time = jiffies;
+ //rx_old_bytes = isPtr->rx_bytes;
+ __netif_rx_schedule(dev);
++ rx_poll_enabled = 1;
+ }
+ }
+ }
++ } else {
++
++ gmac_registers("check #3");
+ }
+
+ // Interrupt Status 0
+@@ -3306,8 +3394,10 @@
+ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+ tp->rx_rwptr.bits32 = rwptr.bits32;
+
+- toe_gmac_fill_free_q();
+ }
++
++ /* Handles first available packets only then refill the queue. */
++ toe_gmac_fill_free_q();
+ }
+
+ /*----------------------------------------------------------------------
+@@ -4217,6 +4307,7 @@
+ GMAC_RXDESC_T *curr_desc;
+ struct sk_buff *skb;
+ DMA_RWPTR_T rwptr;
++ unsigned int data32;
+ unsigned int pkt_size;
+ unsigned int desc_count;
+ unsigned int good_frame, chksum_status, rx_status;
+@@ -4231,7 +4322,7 @@
+ //unsigned long long rx_time;
+
+
+-
++ BUG_ON(rx_poll_enabled == 0);
+ #if 1
+ if (do_again)
+ {
+@@ -4516,6 +4607,30 @@
+ #endif
+ //toe_gmac_fill_free_q();
+ netif_rx_complete(dev);
++
++ rx_poll_enabled = 0;
++
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ if (tp->port_id == 0)
++ data32 |= DEFAULT_Q0_INT_BIT;
++ else
++ data32 |= DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++ if (tp->port_id == 0)
++ data32 |= DEFAULT_Q0_INT_BIT;
++ else
++ data32 |= DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ if (tp->port_id == 0)
++ data32 |= DEFAULT_Q0_INT_BIT;
++ else
++ data32 |= DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++
+ // enable GMAC-0 rx interrupt
+ // class-Q & TOE-Q are implemented in future
+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
diff --git a/target/linux/storm/patches/1006-gmac-napi-tx.patch b/target/linux/storm/patches/1006-gmac-napi-tx.patch
new file mode 100644
index 0000000000..7ba63b85a1
--- /dev/null
+++ b/target/linux/storm/patches/1006-gmac-napi-tx.patch
@@ -0,0 +1,2098 @@
+Index: linux-2.6.23.16/drivers/net/sl351x_gmac.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/sl351x_gmac.c 2008-03-15 17:00:55.366700383 +0200
++++ linux-2.6.23.16/drivers/net/sl351x_gmac.c 2008-03-15 17:01:08.367441241 +0200
+@@ -43,9 +43,13 @@
+
+ #include <linux/mtd/kvctl.h>
+
++#define GET_RPTR(x) ((x) & 0xFFFF)
++#define GET_WPTR(x) ((x) >> 16)
++
+ #define MIDWAY
+ #define SL_LEPUS
+-#define VITESSE_G5SWITCH 1
++// #define VITESSE_G5SWITCH 1
++#undef VITESSE_G5SWITCH
+
+ #ifndef CONFIG_SL351x_RXTOE
+ //#define CONFIG_SL351x_RXTOE 1
+@@ -126,7 +130,6 @@
+ *************************************************************/
+ static int gmac_initialized = 0;
+ TOE_INFO_T toe_private_data;
+-static int do_again = 0;
+ static int rx_poll_enabled;
+ spinlock_t gmac_fq_lock;
+ unsigned int FLAG_SWITCH;
+@@ -190,7 +193,7 @@
+ void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
+ void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
+ void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
+-static inline void toe_gmac_fill_free_q(void);
++static inline void toe_gmac_fill_free_q(int count);
+
+ #ifdef VITESSE_G5SWITCH
+ extern int Get_Set_port_status(void);
+@@ -295,12 +298,14 @@
+ for(j = 0; i<CONFIG_MAC_NUM; j++)
+ {
+ i=j;
++#ifdef VITESSE_G5SWITCH
+ if(Giga_switch){ // if gswitch present, swap eth0/1
+ if(j==0)
+ i=1;
+ else if(j==1)
+ i=0;
+ }
++#endif
+
+ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
+ tp->dev = NULL;
+@@ -459,7 +464,7 @@
+ toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
+ toe->gmac[0].auto_nego_cfg = 1;
+ toe->gmac[1].auto_nego_cfg = 1;
+-#ifdef CONFIG_SL3516_ASIC
++#ifndef CONFIG_SL3516_ASIC
+ toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
+ toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
+ #else
+@@ -508,7 +513,7 @@
+ // Write GLOBAL_QUEUE_THRESHOLD_REG
+ threshold.bits32 = 0;
+ threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
+- TOE_SW_FREEQ_DESC_NUM/2;
++ TOE_SW_FREEQ_DESC_NUM/16;
+ threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
+ TOE_HW_FREEQ_DESC_NUM/4;
+ threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
+@@ -613,18 +618,25 @@
+ rwptr_reg.bits.rptr = 0;
+ toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
+ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG));
+
+ // SW Free Queue Descriptors
+ for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++)
+ {
++ void *data = NULL;
+ sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE;
+- sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb
++ sw_desc_ptr->word1.bits.sw_id = 0; // used to locate skb
+ if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
+ {
+ printk("%s::skb buffer allocation fail !\n",__func__); while(1);
+ }
+- REG32(skb->data) = (unsigned int)skb;
++
++ data = skb->data;
+ skb_reserve(skb, SKB_RESERVE_BYTES);
++
++ REG32(data + 0) = (unsigned int)skb;
++ REG32(data + 4) = (unsigned short)i;
++
+ // toe->rx_skb[i] = skb;
+ sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
+ // consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
+@@ -851,14 +863,14 @@
+ *----------------------------------------------------------------------*/
+ static void toe_init_default_queue(void)
+ {
+- TOE_INFO_T *toe;
++ TOE_INFO_T *toe;
+ volatile NONTOE_QHDR_T *qhdr;
+- GMAC_RXDESC_T *desc_ptr;
+- DMA_SKB_SIZE_T skb_size;
++ GMAC_RXDESC_T *desc_ptr;
++ DMA_SKB_SIZE_T skb_size;
+
+ toe = (TOE_INFO_T *)&toe_private_data;
+ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
+- (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
++ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
+ if (!desc_ptr)
+ {
+ printk("%s::DMA_MALLOC fail !\n",__func__);
+@@ -866,14 +878,17 @@
+ }
+ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
+ toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
++ printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma);
++
+ toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
+ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
+ qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
+ qhdr->word1.bits32 = 0;
+ toe->gmac[0].rx_rwptr.bits32 = 0;
+ toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
++
+ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
+- (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
++ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
+ if (!desc_ptr)
+ {
+ printk("%s::DMA_MALLOC fail !\n",__func__);
+@@ -1071,12 +1086,16 @@
+
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
++
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
++
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
++
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
++
+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+ }
+@@ -1176,11 +1195,11 @@
+ GMAC_CONFIG2_T config2_val;
+ GMAC_CONFIG0_T config0,config0_mask;
+ GMAC_CONFIG1_T config1;
+- #ifdef CONFIG_SL351x_NAT
+ GMAC_CONFIG3_T config3_val;
+- #endif
+ GMAC_TX_WCR0_T hw_weigh;
+ GMAC_TX_WCR1_T sw_weigh;
++
++ uint32_t weight = 0;
+ // GMAC_HASH_ENABLE_REG0_T hash_ctrl;
+ //
+ #if 0 /* mac address will be set in late_initcall */
+@@ -1202,24 +1221,23 @@
+ // config1.bits32 = 0x002004; //next version
+ /* set flow control threshold */
+ config1.bits32 = 0;
+- config1.bits.set_threshold = 32 / 2;
+- config1.bits.rel_threshold = 32 / 4 * 3;
++ config1.bits.set_threshold = (32 / 2);
++ config1.bits.rel_threshold = (32 / 4) * 3;
+ gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
+
+- /* set flow control threshold */
++ /* TODO: set flow control threshold */
+ config2_val.bits32 = 0;
+- config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
+- config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
++ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4;
++ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2;
+ gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
+
+- #ifdef CONFIG_SL351x_NAT
+- /* set HW free queue flow control threshold */
++ /* TODO: set HW free queue flow control threshold */
+ config3_val.bits32 = 0;
+ config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
+ config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
+ gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
+- #endif
+- /* set_mcast_filter mask*/
++
++ /* TODO: set_mcast_filter mask*/
+ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
+ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
+
+@@ -1249,7 +1267,7 @@
+ config0.bits.dis_rx = 1; /* disable rx */
+ config0.bits.dis_tx = 1; /* disable tx */
+ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
+- config0.bits.rx_err_detect = 1;
++ config0.bits.rx_err_detect = 1; /* TODO: was 1, means disabled, 0 enabled ! */
+ config0.bits.rgmii_en = 0;
+ config0.bits.rgmm_edge = 1;
+ config0.bits.rxc_inv = 0;
+@@ -1342,6 +1360,9 @@
+ gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
+ #endif
+
++ weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG);
++ printk("====> %08X\n", weight);
++
+ #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
+ #endif
+@@ -1552,7 +1573,7 @@
+ rwptr.bits32 = readl(swtxq->rwptr_reg);
+ if (rwptr.bits.rptr == swtxq->finished_idx)
+ break;
+- curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
++ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
+ // consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
+ word0.bits32 = curr_desc->word0.bits32;
+ word1.bits32 = curr_desc->word1.bits32;
+@@ -1573,6 +1594,7 @@
+ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
+ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
+ word0.bits32 = curr_desc->word0.bits32;
++
+ #ifdef _DUMP_TX_TCP_CONTENT
+ if (curr_desc->word0.bits.buffer_size < 16)
+ {
+@@ -1592,12 +1614,12 @@
+ word0.bits.status_tx_ok = 0;
+ if (swtxq->tx_skb[swtxq->finished_idx])
+ {
+- if (interrupt)
+- dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
+- else
+- dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
++ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
+ swtxq->tx_skb[swtxq->finished_idx] = NULL;
++ } else {
++ BUG();
+ }
++
+ curr_desc->word0.bits32 = word0.bits32;
+ swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
+ swtxq->total_finished++;
+@@ -1624,31 +1646,29 @@
+ *----------------------------------------------------------------------*/
+ static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+- GMAC_INFO_T *tp= dev->priv;
+-// static unsigned int pcount = 0;
+-// unsigned int tx_qid;
+- DMA_RWPTR_T rwptr;
+- volatile GMAC_TXDESC_T *curr_desc;
+- int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
+- int frag_id = 0;
+- int len, total_len = skb->len;
++ GMAC_INFO_T *tp= dev->priv;
++ DMA_RWPTR_T rwptr;
++ GMAC_TXDESC_T *curr_desc;
++ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
++ int frag_id = 0;
++ int len, total_len = skb->len;
+ struct net_device_stats *isPtr;
+- unsigned int free_desc;
+- GMAC_SWTXQ_T *swtxq;
++ unsigned int free_desc;
++ GMAC_SWTXQ_T *swtxq;
+ register unsigned long word0, word1, word2, word3;
+ unsigned short wptr, rptr;
+ #ifdef L2_jumbo_frame
+ int header_len = skb->len;
+ struct iphdr *ip_hdr;
+- struct tcphdr *tcp_hdr;
+- int tcp_hdr_len;
+- unsigned char *ptr;
+- int data_len,a;
+- unsigned int val;
++ struct tcphdr *tcp_hdr;
++ int tcp_hdr_len;
++ unsigned char *ptr;
++ int data_len,a;
++ unsigned int val;
+ #endif
+
+ #ifdef GMAC_LEN_1_2_ISSUE
+- int total_pages;
++ int total_pages;
+ total_pages = snd_pages;
+ #endif
+
+@@ -1664,13 +1684,6 @@
+ }
+ #endif
+
+-#if 0
+- if (storlink_ctl.recvfile==2)
+- {
+- printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
+- }
+-#endif
+-
+ #ifdef GMAC_USE_TXQ0
+ #define tx_qid 0
+ #endif
+@@ -1703,9 +1716,9 @@
+ toe_gmac_tx_complete(tp, tx_qid, dev, 0);
+
+ if (wptr >= swtxq->finished_idx)
+- free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
++ free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx;
+ else
+- free_desc = swtxq->finished_idx - wptr - 1;
++ free_desc = swtxq->finished_idx - wptr;
+ if (free_desc < snd_pages)
+ {
+ // spin_unlock(&tp->tx_mutex);
+@@ -2063,9 +2076,10 @@
+ struct net_device_stats * gmac_get_stats(struct net_device *dev)
+ {
+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++#if 0 /* don't read stats from hardware, scary numbers. */
+ // unsigned int flags;
+- unsigned int pkt_drop;
+- unsigned int pkt_error;
++ unsigned int pkt_drop = 0;
++ unsigned int pkt_error = 0;
+
+ if (netif_running(dev))
+ {
+@@ -2073,10 +2087,14 @@
+ // spin_lock_irqsave(&tp->lock,flags);
+ pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
+ pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
++ printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop);
++
+ tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
+ tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
+ // spin_unlock_irqrestore(&tp->lock,flags);
+ }
++#endif
++
+ return &tp->ifStatics;
+ }
+
+@@ -2401,36 +2419,63 @@
+ * toe_gmac_fill_free_q
+ * allocate buffers for free queue.
+ *----------------------------------------------------------------------*/
+-static inline void toe_gmac_fill_free_q(void)
++static inline void toe_gmac_fill_free_q(int count)
+ {
+ struct sk_buff *skb;
+ volatile DMA_RWPTR_T fq_rwptr;
+ volatile GMAC_RXDESC_T *fq_desc;
+- unsigned long flags;
++ unsigned long flags;
++ unsigned short index;
++ int filled = 0;
++ static int entered;
+ // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
+
++ BUG_ON(entered == 1);
++
++ entered = 1;
++
++
+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+ // spin_lock_irqsave(&gmac_fq_lock, flags);
+ //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+ // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
+- while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+- TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
++ index = fq_rwptr.bits.wptr;
++#if 0
++ printk("wptr: %hu, rptr: %hu, refill idx: %hu\n",
++ GET_RPTR(fq_rwptr.bits32),
++ GET_WPTR(fq_rwptr.bits32),
++ index);
++#endif
++
++ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index;
++ while (fq_desc->word2.buf_adr == 0) {
++ void *data = NULL;
++
+ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
+ printk("%s::skb allocation fail!\n", __func__);
+- //while(1);
+- break;
++ goto out;
+ }
+- REG32(skb->data) = (unsigned int)skb;
++ ++ filled;
++ data = skb->data;
+ skb_reserve(skb, SKB_RESERVE_BYTES);
+- // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
+- TOE_SW_FREEQ_DESC_NUM);
+- fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
++
++ REG32(data + 0) = (unsigned int)skb;
++ REG32(data + 4) = (unsigned short)index;
++
++ // printk("refill skb: %p, idx: %hu\n", skb, index);
+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
+- SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
+- toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
++ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
++ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index);
++ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
++
++ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
++ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index;
+ }
++out:
+ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
++
++ entered = 0;
+ }
+ // EXPORT_SYMBOL(toe_gmac_fill_free_q);
+
+@@ -2442,14 +2487,14 @@
+ unsigned int status3;
+ unsigned int status4;
+
+- printk("%s\n", message);
+-
+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+
++ printk("%s\n", message);
++
+ printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
+ status0, status1, status2, status3, status4);
+
+@@ -2468,8 +2513,9 @@
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+
+- printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
+- status0, status1, status2, status3, status4);
++ if (status0 || status1 || status2 || status3 || status4)
++ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
++ status0, status1, status2, status3, status4);
+ }
+ /*----------------------------------------------------------------------
+ * toe_gmac_interrupt
+@@ -2485,75 +2531,44 @@
+ unsigned int status3;
+ unsigned int status4;
+
+-// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+ toe = (TOE_INFO_T *)&toe_private_data;
+-// handle NAPI
+-#ifdef CONFIG_SL_NAPI
+- /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
+-if (1)
+-{
+-/* disable GMAC interrupt */
+- //toe_gmac_disable_interrupt(tp->irq);
+
+-// isPtr->interrupts++;
++ if (0 && rx_poll_enabled) {
++ gmac_registers("interrupt handler");
++ }
++
+ /* read Interrupt status */
+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+- // prompt warning if status bit ON but not enabled
++
+ #if 0
+- if (status0 & ~tp->intr0_enabled)
+- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
+- status0, tp->intr0_enabled);
+- if (status1 & ~tp->intr1_enabled)
+- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
+- status1, tp->intr1_enabled);
+- if (status2 & ~tp->intr2_enabled)
+- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
+- status2, tp->intr2_enabled);
+- if (status3 & ~tp->intr3_enabled)
+- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
+- status3, tp->intr3_enabled);
+- if (status4 & ~tp->intr4_enabled)
+- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
+- status4, tp->intr4_enabled);
++ /* handle freeq interrupt first */
++ if (status4 & SWFQ_EMPTY_INT_BIT)
++ {
++ toe_gmac_fill_free_q();
++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++ tp->sw_fq_empty_cnt++;
++ }
+ #endif
+
++ if (status4 & GMAC0_MIB_INT_BIT)
++ writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
++ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
++ writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++
+ if (status0)
+ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
+- if (status1)
+- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
+ if (status2)
+ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
+ if (status3)
+ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+- if (status4)
+- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+-
+-#if 0
+- /* handle freeq interrupt first */
+- if (status4 & tp->intr4_enabled) {
+- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+- {
+- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
+- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
+- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
+- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
+- printk("\nfreeq int\n");
+- toe_gmac_fill_free_q();
+- tp->sw_fq_empty_cnt++;
+
+- }
+- }
+-#endif
+ // Interrupt Status 1
+- if (status1 & tp->intr1_enabled)
++ if ((status1 & 3) || (status4 & 1))
+ {
+ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
+ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
+@@ -2563,7 +2578,7 @@
+ // because they should pass packets to upper layer
+ if (tp->port_id == 0)
+ {
+- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
++ if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1))
+ {
+ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
+ tp->hwtxq[3].eof_cnt++;
+@@ -2574,50 +2589,51 @@
+ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
+ tp->hwtxq[0].eof_cnt++;
+ }
+- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
++ if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1)
++ {
++ if (likely(netif_rx_schedule_prep(dev)))
+ {
+- if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+- {
+- unsigned int data32;
++ unsigned int data32;
++
++ BUG_ON(rx_poll_enabled == 1);
+
+- if (rx_poll_enabled)
+- gmac_registers("check #1");
++ /* Masks GMAC-0 rx interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ data32 &= ~(DEFAULT_Q0_INT_BIT);
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+
+- BUG_ON(rx_poll_enabled == 1);
++ /* Masks GMAC-0 queue empty interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++ data32 &= ~DEFAULT_Q0_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+
++ __netif_rx_schedule(dev);
++ rx_poll_enabled = 1;
++ } else {
+ #if 0
+- /* Masks GMAC-0 rx interrupt */
+- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- data32 &= ~(DEFAULT_Q0_INT_BIT);
+- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+-
+- /* Masks GMAC-0 queue empty interrupt */
+- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+- data32 &= ~DEFAULT_Q0_INT_BIT;
+- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+-
+- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+- data32 &= ~DEFAULT_Q0_INT_BIT;
+- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+-#endif
+-
+- // class-Q & TOE-Q are implemented in future
+- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //data32 &= ~DEFAULT_Q0_INT_BIT;
+- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
+- writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //tp->total_q_cnt_napi=0;
+- //rx_time = jiffies;
+- //rx_old_bytes = isPtr->rx_bytes;
+- __netif_rx_schedule(dev);
+- rx_poll_enabled = 1;
+- }
++ unsigned int data32;
++
++ if (rx_poll_enabled)
++ gmac_registers("->poll() running.");
++ /* Masks GMAC-0 rx interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ data32 &= ~(DEFAULT_Q0_INT_BIT);
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++
++ /* Masks GMAC-0 queue empty interrupt */
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++ data32 &= ~DEFAULT_Q0_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
++#endif
++ }
++ } else {
++ if (0)
++ gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1");
+ }
+ }
+- else if (tp->port_id == 1)
++ else if (tp->port_id == 1 && netif_running(dev))
+ {
+- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
++ if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
+ {
+ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
+ tp->hwtxq[3].eof_cnt++;
+@@ -2629,14 +2645,14 @@
+ tp->hwtxq[0].eof_cnt++;
+ }
+
+- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
++ if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+ {
+ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
+- {
+- unsigned int data32;
++ {
++ unsigned int data32;
+
+ if (rx_poll_enabled)
+- gmac_registers("check #2");
++ gmac_registers("check #2");
+
+ BUG_ON(rx_poll_enabled == 1);
+
+@@ -2646,7 +2662,7 @@
+ data32 &= ~(DEFAULT_Q1_INT_BIT);
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+
+- /* Masks GMAC-1 queue empty interrupt */
++ /* Masks GMAC-1 queue empty interrupt */
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ data32 &= ~DEFAULT_Q1_INT_BIT;
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+@@ -2656,24 +2672,21 @@
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
+ #endif
+
+- // disable GMAC-0 rx interrupt
+- // class-Q & TOE-Q are implemented in future
+- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //data32 &= ~DEFAULT_Q1_INT_BIT;
++ // disable GMAC-0 rx interrupt
++ // class-Q & TOE-Q are implemented in future
++ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ //data32 &= ~DEFAULT_Q1_INT_BIT;
+ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
+ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+ //tp->total_q_cnt_napi=0;
+ //rx_time = jiffies;
+ //rx_old_bytes = isPtr->rx_bytes;
+- __netif_rx_schedule(dev);
+- rx_poll_enabled = 1;
+- }
++ __netif_rx_schedule(dev);
++ rx_poll_enabled = 1;
++ }
+ }
+ }
+- } else {
+-
+- gmac_registers("check #3");
+ }
+
+ // Interrupt Status 0
+@@ -2814,676 +2827,93 @@
+ }
+ }
+
+- //toe_gmac_enable_interrupt(tp->irq);
+-#ifdef IxscriptMate_1518
+- if (storlink_ctl.pauseoff == 1)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+-#endif
+-// enable_irq(gmac_irq[dev_index]);
+- //printk("gmac_interrupt complete!\n\n");
+-// return IRQ_RETVAL(handled);
+ return IRQ_RETVAL(1);
+ }
+-else
+-{
+-#endif //endif NAPI
+
++/*----------------------------------------------------------------------
++* gmac_get_phy_vendor
++*----------------------------------------------------------------------*/
++static unsigned int gmac_get_phy_vendor(int phy_addr)
++{
++ unsigned int reg_val;
++ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
++ return reg_val;
++}
+
+- /* disable GMAC interrupt */
+- toe_gmac_disable_interrupt(tp->irq);
++/*----------------------------------------------------------------------
++* gmac_set_phy_status
++*----------------------------------------------------------------------*/
++void gmac_set_phy_status(struct net_device *dev)
++{
++ GMAC_INFO_T *tp = dev->priv;
++ GMAC_STATUS_T status;
++ unsigned int reg_val, ability,wan_port_id;
++ unsigned int i = 0;
+
+-// isPtr->interrupts++;
+- /* read Interrupt status */
+- status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
+- status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
+- status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
+- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
+- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+- // prompt warning if status bit ON but not enabled
++#ifdef VITESSE_G5SWITCH
++ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
+ #if 0
+- if (status0 & ~tp->intr0_enabled)
+- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
+- status0, tp->intr0_enabled);
+- if (status1 & ~tp->intr1_enabled)
+- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
+- status1, tp->intr1_enabled);
+- if (status2 & ~tp->intr2_enabled)
+- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
+- status2, tp->intr2_enabled);
+- if (status3 & ~tp->intr3_enabled)
+- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
+- status3, tp->intr3_enabled);
+- if (status4 & ~tp->intr4_enabled)
+- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
+- status4, tp->intr4_enabled);
+-#endif
+-#define INTERRUPT_SELECT 1
+- if (status0)
+- writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
+- if (status1)
+- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
+- if (status2)
+- writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
+- if (status3)
+- writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
+- if (status4)
+- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+-
+- /* handle freeq interrupt first */
+- if (status4 & tp->intr4_enabled) {
+- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+- {
+- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
+- // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
+- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
+- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
+- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
+- printk("\nfreeq int\n");
+- toe_gmac_fill_free_q();
+- tp->sw_fq_empty_cnt++;
+-
+- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+- SWFQ_EMPTY_INT_BIT);
+- }
+- }
+-
+- // Interrupt Status 1
+- if (status1 & tp->intr1_enabled)
+- {
+- #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
+- #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
+- // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
+- // Only count
+- // TOE, Classification, and default queues interrupts are handled by ISR
+- // because they should pass packets to upper layer
+- if (tp->port_id == 0)
+- {
+-#ifndef INTERRUPT_SELECT
+- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
+- {
+- if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
+- tp->hwtxq[3].eof_cnt++;
+- if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
+- tp->hwtxq[2].eof_cnt++;
+- if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
+- tp->hwtxq[1].eof_cnt++;
+- if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
+- tp->hwtxq[0].eof_cnt++;
+-#endif //INTERRUPT_SELECT
+-#ifndef INTERRUPT_SELECT
+- }
+-#endif //INTERRUPT_SELECT
+- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
+- {
+- tp->default_q_intr_cnt++;
+- toe_gmac_handle_default_rxq(dev, tp);
++ rcv_mask = SPI_read(2,0,0x10); // Receive mask
++ rcv_mask |= 0x4F;
++ for(i=0;i<4;i++){
++ reg_val = BIT(26)|(i<<21)|(10<<16);
++ SPI_write(3,0,1,reg_val);
++ msleep(10);
++ reg_val = SPI_read(3,0,2);
++ if(reg_val & 0x0c00){
++ printk("Port%d:Giga mode\n",i);
++ SPI_write(1,i,0x00,0x300701B1);
++ SPI_write(1,i,0x00,0x10070181);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_1000;
+ }
+-#ifdef CONFIG_SL351x_RXTOE
+- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
+- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
+- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
+- toe_gmac_handle_toeq(dev, tp, status1);
+- //toe_gmac_handle_toeq(dev, toe, tp, status1);
++ else{
++ reg_val = BIT(26)|(i<<21)|(5<<16);
++ SPI_write(3,0,1,reg_val);
++ msleep(10);
++ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
++ if ((ability & 0x0C)) /* 100M full duplex */
++ {
++ SPI_write(1,i,0x00,0x30050472);
++ SPI_write(1,i,0x00,0x10050442);
++ printk("Port%d:100M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_100;
++ }
++ else if((ability & 0x03)) /* 10M full duplex */
++ {
++ SPI_write(1,i,0x00,0x30050473);
++ SPI_write(1,i,0x00,0x10050443);
++ printk("Port%d:10M\n",i);
++ switch_pre_link[i]=LINK_UP;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ }
++ else{
++ SPI_write(1,i,0x00,BIT(16)); // disable RX
++ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
++ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
++ msleep(1);
++
++ SPI_write(1,i,0x00,0x20000030); // PORT_RST
++ switch_pre_link[i]=LINK_DOWN;
++ switch_pre_speed[i]=GMAC_SPEED_10;
++ rcv_mask &= ~BIT(i);
++ SPI_write(2,0,0x10,rcv_mask); // Disable Receive
++ }
+ }
+-#endif
+ }
+- else if (tp->port_id == 1)
+- {
+-#ifndef INTERRUPT_SELECT
+- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
+- {
+- if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
+- tp->hwtxq[3].eof_cnt++;
+- if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
+- tp->hwtxq[2].eof_cnt++;
+- if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
+- tp->hwtxq[1].eof_cnt++;
+- if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
+- tp->hwtxq[0].eof_cnt++;
+-#endif //INTERRUPT_SELECT
+-#ifndef INTERRUPT_SELECT
+- }
+-#endif //INTERRUPT_SELECT
+- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
+- {
+- tp->default_q_intr_cnt++;
+- toe_gmac_handle_default_rxq(dev, tp);
+- }
+-#ifdef CONFIG_SL351x_RXTOE
+- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
+- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
+- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
+- toe_gmac_handle_toeq(dev, tp, status1);
+- //toe_gmac_handle_toeq(dev, toe, tp, status1);
+- }
+ #endif
+- }
++ gmac_get_switch_status(dev);
++ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
++// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
++ return ;
+ }
++#endif
+
++ reg_val = gmac_get_phy_vendor(tp->phy_addr);
++ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
+
+- // Interrupt Status 0
+- if (status0 & tp->intr0_enabled)
+- {
+-
+- #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
+- GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
+- GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
+- GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
+-#ifndef INTERRUPT_SELECT
+- if (status0 & ERR_INTR_BITS)
+- {
+- if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
+- {
+- tp->txDerr_cnt[0]++;
+- printk("GMAC0 TX AHB Bus Error!\n");
+- }
+- if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
+- {
+- tp->txPerr_cnt[0]++;
+- printk("GMAC0 Tx Descriptor Protocol Error!\n");
+- }
+- if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
+- {
+- tp->txDerr_cnt[1]++;
+- printk("GMAC1 Tx AHB Bus Error!\n");
+- }
+- if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
+- {
+- tp->txPerr_cnt[1]++;
+- printk("GMAC1 Tx Descriptor Protocol Error!\n");
+- }
+-
+- if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
+- {
+- tp->RxDerr_cnt[0]++;
+- printk("GMAC0 Rx AHB Bus Error!\n");
+- }
+- if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
+- {
+- tp->RxPerr_cnt[0]++;
+- printk("GMAC0 Rx Descriptor Protocol Error!\n");
+- }
+- if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
+- {
+- tp->RxDerr_cnt[1]++;
+- printk("GMAC1 Rx AHB Bus Error!\n");
+- }
+- if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
+- {
+- tp->RxPerr_cnt[1]++;
+- printk("GMAC1 Rx Descriptor Protocol Error!\n");
+- }
+- }
+-#endif //INTERRUPT_SELECT
+-#ifndef GMAX_TX_INTR_DISABLED
+- if (tp->port_id == 1 && netif_running(dev) &&
+- (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
+- ||
+- ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
+- {
+- toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
+- }
+-
+- if (tp->port_id == 0 && netif_running(dev) &&
+- (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
+- ||
+- ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
+- {
+- toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
+- }
+-#endif
+- // clear enabled status bits
+- }
+- // Interrupt Status 4
+-#ifndef INTERRUPT_SELECT
+- if (status4 & tp->intr4_enabled)
+- {
+- #define G1_INTR4_BITS (0xff000000)
+- #define G0_INTR4_BITS (0x00ff0000)
+-
+- if (tp->port_id == 0)
+- {
+- if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
+- {
+- if (status4 & GMAC0_RESERVED_INT_BIT)
+- printk("GMAC0_RESERVED_INT_BIT is ON\n");
+- if (status4 & GMAC0_MIB_INT_BIT)
+- tp->mib_full_cnt++;
+- if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
+- tp->rx_pause_on_cnt++;
+- if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
+- tp->tx_pause_on_cnt++;
+- if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
+- tp->rx_pause_off_cnt++;
+- if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
+- tp->rx_pause_off_cnt++;
+- if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
+- tp->rx_overrun_cnt++;
+- if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
+- tp->status_changed_cnt++;
+- }
+- }
+- else if (tp->port_id == 1)
+- {
+- if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
+- {
+- if (status4 & GMAC1_RESERVED_INT_BIT)
+- printk("GMAC1_RESERVED_INT_BIT is ON\n");
+- if (status4 & GMAC1_MIB_INT_BIT)
+- tp->mib_full_cnt++;
+- if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
+- {
+- //printk("Gmac pause on\n");
+- tp->rx_pause_on_cnt++;
+- }
+- if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
+- {
+- //printk("Gmac pause on\n");
+- tp->tx_pause_on_cnt++;
+- }
+- if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
+- {
+- //printk("Gmac pause off\n");
+- tp->rx_pause_off_cnt++;
+- }
+- if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
+- {
+- //printk("Gmac pause off\n");
+- tp->rx_pause_off_cnt++;
+- }
+- if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
+- {
+- //printk("Gmac Rx Overrun \n");
+- tp->rx_overrun_cnt++;
+- }
+- if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
+- tp->status_changed_cnt++;
+- }
+- }
+-#if 0
+- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
+- {
+- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+-// mac_stop_rxdma(tp->sc);
+- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
+- tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+-
+- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
+- SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
+- toe_gmac_fill_free_q();
+- tp->sw_fq_empty_cnt++;
+-
+- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+- SWFQ_EMPTY_INT_BIT);
+-//#if 0
+-/* if (netif_running(dev))
+- toe_gmac_handle_default_rxq(dev, tp);
+- printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */
+-//#endif
+- }
+-#endif
+- }
+-#endif //INTERRUPT_SELECT
+- toe_gmac_enable_interrupt(tp->irq);
+-//enable gmac rx function when do RFC 2544
+-#ifdef IxscriptMate_1518
+- if (storlink_ctl.pauseoff == 1)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+-#endif
+- //printk("gmac_interrupt complete!\n\n");
+-// return IRQ_RETVAL(handled);
+- return IRQ_RETVAL(1);
+-#ifdef CONFIG_SL_NAPI
+-}
+-#endif
+-}
+-
+-/*----------------------------------------------------------------------
+-* toe_gmac_handle_default_rxq
+-* (1) Get rx Buffer for default Rx queue
+-* (2) notify or call upper-routine to handle it
+-* (3) get a new buffer and insert it into SW free queue
+-* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing
+-*----------------------------------------------------------------------*/
+-//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
+-static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
+-{
+- TOE_INFO_T *toe;
+- GMAC_RXDESC_T *curr_desc;
+- struct sk_buff *skb;
+- DMA_RWPTR_T rwptr;
+- unsigned int pkt_size;
+- int max_cnt;
+- unsigned int desc_count;
+- unsigned int good_frame, chksum_status, rx_status;
+- struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+-
+-//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
+-#ifdef IxscriptMate_1518
+- if (storlink_ctl.pauseoff == 1)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 1;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 1;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+-#endif
+- rwptr.bits32 = readl(&tp->default_qhdr->word1);
+-#if 0
+- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
+- {
+- mac_stop_txdma((struct net_device *)tp->dev);
+- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
+- rwptr.bits32, tp->rx_rwptr.bits.rptr);
+- while(1);
+- }
+-#endif
+- toe = (TOE_INFO_T *)&toe_private_data;
+- max_cnt = DEFAULT_RXQ_MAX_CNT;
+- while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
+-// while (rwptr.bits.rptr != rwptr.bits.wptr)
+- {
+-//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
+-#ifdef IxscriptMate_1518
+- if (storlink_ctl.pauseoff == 1)
+- {
+- if (pkt_size != 1514)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+- }
+-#endif
+- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
+-// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
+- tp->default_q_cnt++;
+- tp->rx_curr_desc = (unsigned int)curr_desc;
+- rx_status = curr_desc->word0.bits.status;
+- chksum_status = curr_desc->word0.bits.chksum_status;
+- tp->rx_status_cnt[rx_status]++;
+- tp->rx_chksum_cnt[chksum_status]++;
+- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
+- desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
+- good_frame=1;
+- if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
+- || (pkt_size < 60)
+- || (chksum_status & 0x4)
+- || rx_status)
+- {
+- good_frame = 0;
+- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
+- printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
+- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
+- printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
+- if (rx_status)
+- {
+- if (rx_status == 4 || rx_status == 7)
+- isPtr->rx_crc_errors++;
+-// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
+- }
+-#ifdef SL351x_GMAC_WORKAROUND
+- else if (pkt_size < 60)
+- {
+- if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
+- tp->short_frames_cnt++;
+- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 1;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 1;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+- }
+-#endif
+-// if (chksum_status)
+-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+- dev_kfree_skb_irq(skb);
+- }
+- if (good_frame)
+- {
+- if (curr_desc->word0.bits.drop)
+- printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
+-// if (chksum_status)
+-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+-
+- /* get frame information from the first descriptor of the frame */
+-#ifdef SL351x_GMAC_WORKAROUND
+- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+- {
+- GMAC_CONFIG0_T config0;
+- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
+- config0.bits.dis_rx = 0;
+- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- }
+- tp->short_frames_cnt = 0;
+-#endif
+- isPtr->rx_packets++;
+- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
+- if (!skb)
+- {
+- printk("Fatal Error!!skb==NULL\n");
+- goto next_rx;
+- }
+- tp->curr_rx_skb = skb;
+- // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
+-
+- // curr_desc->word2.buf_adr = 0;
+-
+- skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */
+- skb_put(skb, pkt_size);
+- skb->dev = dev;
+- if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
+- {
+- skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+- {
+- struct iphdr *ip_hdr;
+- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+-#endif
+- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-#if 0
+-#ifdef CONFIG_SL351x_RXTOE
+- if (storlink_ctl.rx_max_pktsize) {
+- struct iphdr *ip_hdr;
+- struct tcphdr *tcp_hdr;
+- int ip_hdrlen;
+-
+- ip_hdr = (struct iphdr*)&(skb->data[0]);
+- if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
+- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
+- ip_hdrlen = ip_hdr->ihl << 2;
+- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
+- if (tcp_hdr->syn) {
+- struct toe_conn* connection = init_toeq(ip_hdr->version,
+- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
+- TCP_SKB_CB(skb)->connection = connection;
+- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
+- // printk("%s::skb data %x, conn %x, mode %x\n",
+- // __func__, skb->data, connection, connection->mode);
+- }
+- }
+- }
+-#endif
+-#endif
+- }
+- else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
+- {
+- skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+- {
+- struct iphdr *ip_hdr;
+- //struct tcphdr *tcp_hdr;
+- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+- //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
+- if (ip_hdr->protocol == IPPROTO_UDP)
+- {
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+- else if (ip_hdr->protocol == IPPROTO_GRE)
+- {
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+- }
+-#endif
+- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+- }
+- else
+- {
+- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+- }
+-
+- netif_rx(skb); /* socket rx */
+- dev->last_rx = jiffies;
+-
+- isPtr->rx_bytes += pkt_size;
+-
+- }
+-
+-next_rx:
+- // advance one for Rx default Q 0/1
+- rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+- SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+- tp->rx_rwptr.bits32 = rwptr.bits32;
+-
+- }
+-
+- /* Handles first available packets only then refill the queue. */
+- toe_gmac_fill_free_q();
+-}
+-
+-/*----------------------------------------------------------------------
+-* gmac_get_phy_vendor
+-*----------------------------------------------------------------------*/
+-static unsigned int gmac_get_phy_vendor(int phy_addr)
+-{
+- unsigned int reg_val;
+- reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
+- return reg_val;
+-}
+-
+-/*----------------------------------------------------------------------
+-* gmac_set_phy_status
+-*----------------------------------------------------------------------*/
+-void gmac_set_phy_status(struct net_device *dev)
+-{
+- GMAC_INFO_T *tp = dev->priv;
+- GMAC_STATUS_T status;
+- unsigned int reg_val, ability,wan_port_id;
+- unsigned int i = 0;
+-
+-#ifdef VITESSE_G5SWITCH
+- if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
+-#if 0
+- rcv_mask = SPI_read(2,0,0x10); // Receive mask
+- rcv_mask |= 0x4F;
+- for(i=0;i<4;i++){
+- reg_val = BIT(26)|(i<<21)|(10<<16);
+- SPI_write(3,0,1,reg_val);
+- msleep(10);
+- reg_val = SPI_read(3,0,2);
+- if(reg_val & 0x0c00){
+- printk("Port%d:Giga mode\n",i);
+- SPI_write(1,i,0x00,0x300701B1);
+- SPI_write(1,i,0x00,0x10070181);
+- switch_pre_link[i]=LINK_UP;
+- switch_pre_speed[i]=GMAC_SPEED_1000;
+- }
+- else{
+- reg_val = BIT(26)|(i<<21)|(5<<16);
+- SPI_write(3,0,1,reg_val);
+- msleep(10);
+- ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
+- if ((ability & 0x0C)) /* 100M full duplex */
+- {
+- SPI_write(1,i,0x00,0x30050472);
+- SPI_write(1,i,0x00,0x10050442);
+- printk("Port%d:100M\n",i);
+- switch_pre_link[i]=LINK_UP;
+- switch_pre_speed[i]=GMAC_SPEED_100;
+- }
+- else if((ability & 0x03)) /* 10M full duplex */
+- {
+- SPI_write(1,i,0x00,0x30050473);
+- SPI_write(1,i,0x00,0x10050443);
+- printk("Port%d:10M\n",i);
+- switch_pre_link[i]=LINK_UP;
+- switch_pre_speed[i]=GMAC_SPEED_10;
+- }
+- else{
+- SPI_write(1,i,0x00,BIT(16)); // disable RX
+- SPI_write(5,0,0x0E,BIT(i)); // dicard packet
+- while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
+- msleep(1);
+-
+- SPI_write(1,i,0x00,0x20000030); // PORT_RST
+- switch_pre_link[i]=LINK_DOWN;
+- switch_pre_speed[i]=GMAC_SPEED_10;
+- rcv_mask &= ~BIT(i);
+- SPI_write(2,0,0x10,rcv_mask); // Disable Receive
+- }
+- }
+- }
+-#endif
+- gmac_get_switch_status(dev);
+- gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
+-// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
+- return ;
+- }
+-#endif
+-
+- reg_val = gmac_get_phy_vendor(tp->phy_addr);
+- printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
+-
+- switch (tp->phy_mode)
++ switch (tp->phy_mode)
+ {
+ case GMAC_PHY_GMII:
+ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
+@@ -3552,6 +2982,7 @@
+ status.bits.link = LINK_DOWN;
+ // clear_bit(__LINK_STATE_START, &dev->state);
+ printk("Link Down (0x%04x) ", reg_val);
++#ifdef VITESSE_G5SWITCH
+ if(Giga_switch == 1)
+ {
+ wan_port_id = 1;
+@@ -3565,6 +2996,7 @@
+ storlink_ctl.link[ tp->port_id] = 0;
+ #endif
+ }
++#endif
+ }
+ else
+ {
+@@ -3572,6 +3004,7 @@
+ status.bits.link = LINK_UP;
+ // set_bit(__LINK_STATE_START, &dev->state);
+ printk("Link Up (0x%04x) ",reg_val);
++#ifdef VITESSE_G5SWITCH
+ if(Giga_switch == 1)
+ {
+ wan_port_id = 1;
+@@ -3585,6 +3018,7 @@
+ storlink_ctl.link[ tp->port_id] = 1;
+ #endif
+ }
++#endif
+ }
+ // value = mii_read(PHY_ADDR,0x05);
+
+@@ -3863,6 +3297,7 @@
+ }
+ }
+ status.bits.link = LINK_UP; /* link up */
++#ifdef VITESSE_G5SWITCH
+ if(Giga_switch==1)
+ {
+ wan_port_id = 1;
+@@ -3874,6 +3309,7 @@
+ storlink_ctl.link[ tp->port_id] = 1;
+ #endif
+ }
++#endif
+ if ((ability & 0x20)==0x20)
+ {
+ if (tp->flow_control_enable == 0)
+@@ -3914,6 +3350,7 @@
+ else
+ {
+ status.bits.link = LINK_DOWN; /* link down */
++#ifdef VITESSE_G5SWITCH
+ if(Giga_switch == 1)
+ {
+ wan_port_id = 1;
+@@ -3925,6 +3362,7 @@
+ storlink_ctl.link[ tp->port_id] = 0;
+ #endif
+ }
++#endif
+ if (tp->pre_phy_status == LINK_UP)
+ {
+ printk("GMAC-%d LINK_Down......\n",tp->port_id);
+@@ -4298,86 +3736,102 @@
+ }
+
+ #ifdef CONFIG_SL_NAPI
++
++static int gmax_rx(struct net_device *dev, int *budget)
++{
++ return 0;
++}
++
++static int gmac_tx(struct net_device *dev, int *budget)
++{
++ return 0;
++}
++
+ /*----------------------------------------------------------------------
+ * gmac_rx_poll
+ *----------------------------------------------------------------------*/
+ static int gmac_rx_poll(struct net_device *dev, int *budget)
+ {
+- TOE_INFO_T *toe;
+- GMAC_RXDESC_T *curr_desc;
+- struct sk_buff *skb;
+- DMA_RWPTR_T rwptr;
+- unsigned int data32;
+- unsigned int pkt_size;
+- unsigned int desc_count;
+- unsigned int good_frame, chksum_status, rx_status;
+- int rx_pkts_num = 0;
+- int quota = min(dev->quota, *budget);
+- GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
+- unsigned int status4;
+- volatile DMA_RWPTR_T fq_rwptr;
+- // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
+- //unsigned long rx_old_bytes;
++ TOE_INFO_T *toe;
++ GMAC_RXDESC_T *curr_desc;
++ struct sk_buff *skb;
++ DMA_RWPTR_T rwptr;
++ unsigned int data32;
++ unsigned int pkt_size;
++ unsigned int desc_count;
++ unsigned int good_frame, chksum_status, rx_status;
++ int rx_pkts_num = 0;
++ int quota = min(dev->quota, *budget);
++ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
++ unsigned int status1;
++ unsigned int status4;
+ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
+- //unsigned long long rx_time;
+-
+
+ BUG_ON(rx_poll_enabled == 0);
+-#if 1
+- if (do_again)
+- {
+- toe_gmac_fill_free_q();
+- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
+- if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
+- {
+- //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
+- do_again =0;
+- //netif_rx_complete(dev);
+- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1);
+- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- rwptr.bits32 = readl(&tp->default_qhdr->word1);
+- }
+- else
+- return 1;
+- }
+-#endif
+- rwptr.bits32 = readl(&tp->default_qhdr->word1);
+-#if 0
+- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
+- {
+- mac_stop_txdma((struct net_device *)tp->dev);
+- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
+- rwptr.bits32, tp->rx_rwptr.bits.rptr);
+- while(1);
+- }
+-#endif
++
+ toe = (TOE_INFO_T *)&toe_private_data;
+
+- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
+- //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
++rx_poll_retry:
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ if (status1 & 1) {
++ writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ }
+
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
+ while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
+ {
+-
+- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
++ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
+ tp->default_q_cnt++;
+- tp->rx_curr_desc = (unsigned int)curr_desc;
+- rx_status = curr_desc->word0.bits.status;
+- chksum_status = curr_desc->word0.bits.chksum_status;
+- tp->rx_status_cnt[rx_status]++;
+- tp->rx_chksum_cnt[chksum_status]++;
+- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
++ tp->rx_curr_desc = (unsigned int)curr_desc;
++ rx_status = curr_desc->word0.bits.status;
++ chksum_status = curr_desc->word0.bits.chksum_status;
++ tp->rx_status_cnt[rx_status]++;
++ tp->rx_chksum_cnt[chksum_status]++;
++ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
+ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
+ good_frame=1;
++
++ if (0) {
++
++ int free, busy;
++ uint32_t rwptr1;
++ uint32_t rwptr2;
++
++ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
++
++ rwptr2 = readl(&tp->default_qhdr->word1);
++ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
++
++ if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) {
++ printk("frame status: %d\n"
++ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
++ "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
++ rx_status,
++ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
++ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
++ }
++ }
++
++ {
++ GMAC_RXDESC_T *fq_desc;
++ void *data;
++ struct sk_buff *skb;
++ unsigned short idx;
++
++ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
++ idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4));
++
++ BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM);
++ BUG_ON(skb == NULL);
++ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx;
++ fq_desc->word2.buf_adr = 0;
++ }
++
+ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
+- || (pkt_size < 60)
++ || (pkt_size < 60)
+ || (chksum_status & 0x4)
+ || rx_status )
+-// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
+ {
+ good_frame = 0;
+ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
+@@ -4388,7 +3842,6 @@
+ {
+ if (rx_status == 4 || rx_status == 7)
+ isPtr->rx_crc_errors++;
+-// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
+ }
+ #ifdef SL351x_GMAC_WORKAROUND
+ else if (pkt_size < 60)
+@@ -4407,17 +3860,32 @@
+ }
+ }
+ #endif
+-// if (chksum_status)
+-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+- dev_kfree_skb_irq(skb);
++ dev_kfree_skb(skb);
++
++ if (0) {
++ int free, busy;
++ uint32_t rwptr1;
++ uint32_t rwptr2;
++
++ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
++ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
++
++ rwptr2 = readl(&tp->default_qhdr->word1);
++ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
++
++ printk("frame status: %d\n"
++ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
++ "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
++ rx_status,
++ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
++ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
++ }
+ }
+ if (good_frame)
+ {
+ if (curr_desc->word0.bits.drop)
+ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
+-// if (chksum_status)
+-// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
+
+ #ifdef SL351x_GMAC_WORKAROUND
+ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
+@@ -4432,225 +3900,118 @@
+ }
+ tp->short_frames_cnt = 0;
+ #endif
+- /* get frame information from the first descriptor of the frame */
++ /* get frame information from the first descriptor of the frame */
+ isPtr->rx_packets++;
+- //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
++ consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
+ tp->curr_rx_skb = skb;
+- // curr_desc->word2.buf_adr = 0;
+
+- //skb_reserve (skb, SKB_RESERVE_BYTES);
+ skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */
+- //if ((skb->tail+pkt_size) > skb->end )
+- //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
+ skb_put(skb, pkt_size);
+
+-
+ skb->dev = dev;
+ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
+ {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+- {
+- struct iphdr *ip_hdr;
+- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+-#endif
+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+-#if 0
+-#ifdef CONFIG_SL351x_RXTOE
+- if (storlink_ctl.rx_max_pktsize) {
+- struct iphdr *ip_hdr;
+- struct tcphdr *tcp_hdr;
+- int ip_hdrlen;
+-
+- ip_hdr = (struct iphdr*)&(skb->data[0]);
+- if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
+- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
+- ip_hdrlen = ip_hdr->ihl << 2;
+- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
+- if (tcp_hdr->syn) {
+- struct toe_conn* connection = init_toeq(ip_hdr->version,
+- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
+- TCP_SKB_CB(skb)->connection = connection;
+- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
+- // printk("%s::skb data %x, conn %x, mode %x\n",
+- // __func__, skb->data, connection, connection->mode);
+- }
+- }
+- }
+-#endif
+-#endif
+ }
+ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
+ {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+-#ifdef CONFIG_SL351x_NAT
+- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
+- {
+- struct iphdr *ip_hdr;
+- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
+- if (ip_hdr->protocol == IPPROTO_UDP)
+- {
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+- else if (ip_hdr->protocol == IPPROTO_GRE)
+- {
+- sl351x_nat_input(skb,
+- tp->port_id,
+- (void *)curr_desc->word3.bits.l3_offset,
+- (void *)curr_desc->word3.bits.l4_offset);
+- }
+- }
+-#endif
+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+ }
+ else
+ {
+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
+ }
+- //netif_rx(skb); /* socket rx */
++
+ netif_receive_skb(skb); //For NAPI
+ dev->last_rx = jiffies;
+
+ isPtr->rx_bytes += pkt_size;
+- //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
+-
++ }
+
+- }
+ // advance one for Rx default Q 0/1
+ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+- tp->rx_rwptr.bits32 = rwptr.bits32;
++ tp->rx_rwptr.bits32 = rwptr.bits32;
+ rx_pkts_num++;
+- //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
+- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
+-#if 0
+- if ((status4 & 0x1) == 0)
+- {
+- //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
+- if (tp->total_q_cnt_napi < 1024)
+- {
+- tp->total_q_cnt_napi++;
+- toe_gmac_fill_free_q(); //for iperf test disable
+- }
+- //else
+- //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
++ // rwptr.bits32 = readl(&tp->default_qhdr->word1);
+
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ if (status4 & 1) {
++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
+ }
++
++ toe_gmac_fill_free_q(5);
++ }
++
++#if 0
++ /* avoid races with hard_start_xmit() */
++
++ spin_lock(&gmac_fq_lock);
++ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
++ spin_unlock(&gmac_fq_lock);
+ #endif
+- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+- //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
+- //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
++
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ if (status4 & 1)
++ {
++ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
++ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
++ toe_gmac_fill_free_q(rx_pkts_num);
+ }
+- // advance one for Rx default Q 0/1
+
+- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
+- //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
+- //tp->rx_rwptr.bits32 = rwptr.bits32;
+- //rwptr.bits.rptr = rwptr.bits.rptr;
++ rwptr.bits32 = readl(&tp->default_qhdr->word1);
++ if (rwptr.bits.rptr != rwptr.bits.wptr &&
++ quota > rx_pkts_num)
++ goto rx_poll_retry;
+
+ dev->quota -= rx_pkts_num;
+ *budget -= rx_pkts_num;
+
+- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
+- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
+- rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
+- //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-// if (rwptr.bits.rptr > rwptr.bits.wptr )
+-// {
+- //toe_gmac_disable_rx(dev);
+- //wait_event_interruptible_timeout(freeq_wait,
+- //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
+- //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
+- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+-// return 1;
+-// }
+-
+- if (rwptr.bits.rptr == rwptr.bits.wptr)
++ /* Receive queue is empty now */
++ if (quota >= rx_pkts_num)
+ {
+- // unsigned int data32;
+- //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
+-
+- /* Receive descriptor is empty now */
+-#if 1
+- if (status4 & 0x1)
+- {
+- do_again =1;
+- //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
+- //toe_gmac_disable_interrupt(tp->irq);
+- tp->sw_fq_empty_cnt++;
+- //toe_gmac_disable_rx(dev);
+- writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
+- //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
+- //{
+- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
+- //0x1);
+- //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
+- //if ((status4 & 0x1) == 0)
+- //break;
+- return 1;
+- //}
++ unsigned long flags;
+
++ netif_rx_complete(dev);
++ rx_poll_enabled = 0;
++#if 0
++ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
++ if (status1 & 1) {
++ if (netif_rx_reschedule(dev, rx_pkts_num)) {
++ rx_poll_enabled = 1;
++ return 1;
+ }
++ }
+ #endif
+- //toe_gmac_fill_free_q();
+- netif_rx_complete(dev);
+-
+- rx_poll_enabled = 0;
+
+- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- if (tp->port_id == 0)
+- data32 |= DEFAULT_Q0_INT_BIT;
+- else
+- data32 |= DEFAULT_Q1_INT_BIT;
+- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
++ spin_lock_irqsave(&gmac_fq_lock, flags);
+
+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+ if (tp->port_id == 0)
+- data32 |= DEFAULT_Q0_INT_BIT;
++ data32 |= DEFAULT_Q0_INT_BIT;
+ else
+- data32 |= DEFAULT_Q1_INT_BIT;
++ data32 |= DEFAULT_Q1_INT_BIT;
+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
+
+- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+ if (tp->port_id == 0)
+- data32 |= DEFAULT_Q0_INT_BIT;
++ data32 |= DEFAULT_Q0_INT_BIT;
+ else
+- data32 |= DEFAULT_Q1_INT_BIT;
+- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
++ data32 |= DEFAULT_Q1_INT_BIT;
++ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+
+- // enable GMAC-0 rx interrupt
+- // class-Q & TOE-Q are implemented in future
+- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //if (tp->port_id == 0)
+- //data32 |= DEFAULT_Q0_INT_BIT;
+- //else
+- //data32 |= DEFAULT_Q1_INT_BIT;
+- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
+- writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
+- //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
+- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+- writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
+- writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
+- return 0;
+- }
+- else
+- {
+- //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
+- return 1;
+- }
++ spin_unlock_irqrestore(&gmac_fq_lock, flags);
++
++ return 0;
++ }
++ else
++ {
++ /* not done, will call ->poll() later. */
++ return 1;
++ }
+ }
+ #endif
+
+@@ -5114,6 +4475,7 @@
+ {
+ sl351x_nat_workaround_cnt++;
+ sl351x_nat_workaround_handler();
++ printk("%():%d - workaround\n", __func__, __LINE__);
+ }
+ #endif
+ #endif
+@@ -5124,6 +4486,7 @@
+ }
+
+ do_workaround:
++ printk("doing workaround ?!\n");
+
+ gmac_initialized = 0;
+ if (hanged_state)
+@@ -5290,6 +4653,7 @@
+ GMAC_SWTXQ_T *swtxq;
+ DMA_RWPTR_T rwptr;
+
++ printk("**** %s():%d\n", __func__, __LINE__);
+ toe = (TOE_INFO_T *)&toe_private_data;
+ tp = (GMAC_INFO_T *)&toe->gmac[0];
+ for (i=0; i<GMAC_NUM; i++, tp++)
+@@ -5341,6 +4705,7 @@
+ volatile GMAC_RXDESC_T *curr_desc;
+ struct sk_buff *skb;
+
++ printk("**** %s():%d\n", __func__, __LINE__);
+ toe = (TOE_INFO_T *)&toe_private_data;
+ tp = (GMAC_INFO_T *)&toe->gmac[0];
+ for (i=0; i<GMAC_NUM; i++, tp++)
+@@ -5374,6 +4739,7 @@
+ volatile GMAC_RXDESC_T *curr_desc;
+ struct sk_buff *skb;
+
++ printk("**** %s():%d\n", __func__, __LINE__);
+ toe = (TOE_INFO_T *)&toe_private_data;
+ classq = (CLASSQ_INFO_T *)&toe->classq[0];
+ for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++)
+@@ -5410,6 +4776,7 @@
+ GMAC_RXDESC_T *toe_curr_desc;
+ struct sk_buff *skb;
+
++ printk("**** %s():%d\n", __func__, __LINE__);
+ toe = (TOE_INFO_T *)&toe_private_data;
+ toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
+ for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++)
+Index: linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h
+===================================================================
+--- linux-2.6.23.16.orig/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 17:00:21.364762892 +0200
++++ linux-2.6.23.16/include/asm-arm/arch-sl2312/sl351x_gmac.h 2008-03-15 17:01:08.367441241 +0200
+@@ -107,7 +107,7 @@
+ * The base address and descriptor number are configured at
+ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
+ **********************************************************************/
+-#define TOE_SW_FREEQ_DESC_POWER 10
++#define TOE_SW_FREEQ_DESC_POWER 8
+ #define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER)
+ #define TOE_HW_FREEQ_DESC_POWER 8
+ #define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER)
+@@ -123,12 +123,12 @@
+ #define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER)
+ #define TOE_DEFAULT_Q1_DESC_POWER 8
+ #define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER)
+-#define TOE_TOE_DESC_POWER 8
+-#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
++#define TOE_TOE_DESC_POWER 8
++#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
+ #define TOE_CLASS_DESC_POWER 8
+-#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
+-#define TOE_INTR_DESC_POWER 8
+-#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
++#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
++#define TOE_INTR_DESC_POWER 8
++#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
+
+ #define TOE_TOE_QUEUE_MAX 64
+ #define TOE_TOE_QUEUE_NUM 64
diff --git a/target/linux/storm/patches/1020-mtd.patch b/target/linux/storm/patches/1020-mtd.patch
new file mode 100644
index 0000000000..7d5d7bc312
--- /dev/null
+++ b/target/linux/storm/patches/1020-mtd.patch
@@ -0,0 +1,4981 @@
+Index: linux-2.6.23.16/drivers/mtd/chips/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/chips/Kconfig 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/chips/Kconfig 2008-03-15 17:03:17.874821522 +0200
+@@ -220,6 +220,13 @@
+ This option enables basic support for ROM chips accessed through
+ a bus mapping driver.
+
++config MTD_SERIAL
++ tristate "Support for Serial chips in bus mapping"
++ depends on MTD
++ help
++ This option enables basic support for Serial chips accessed through
++ a bus mapping driver.
++
+ config MTD_ABSENT
+ tristate "Support for absent chips in bus mapping"
+ help
+Index: linux-2.6.23.16/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/chips/cfi_cmdset_0002.c 2008-03-15 17:03:17.874821522 +0200
+@@ -39,10 +39,15 @@
+ #include <linux/mtd/cfi.h>
+ #include <linux/mtd/xip.h>
+
++//****** Storlink SoC ******
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
+-
+-#define MAX_WORD_RETRIES 3
++//#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
++#define FORCE_FAST_PROG 0
++
++//#define MAX_WORD_RETRIES 3
++#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
++//**************************
+
+ #define MANUFACTURER_AMD 0x0001
+ #define MANUFACTURER_ATMEL 0x001F
+@@ -322,6 +327,13 @@
+ #endif
+
+ bootloc = extp->TopBottom;
++//****** Storlink SoC ******
++ if(bootloc == 5)
++ {
++ bootloc = 3;
++ extp->TopBottom = 3;
++ }
++//**************************
+ if ((bootloc != 2) && (bootloc != 3)) {
+ printk(KERN_WARNING "%s: CFI does not contain boot "
+ "bank location. Assuming top.\n", map->name);
+@@ -340,6 +352,9 @@
+ cfi->cfiq->EraseRegionInfo[j] = swap;
+ }
+ }
++#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
++ cfi->device_type = CFI_DEVICETYPE_X8;
++#endif
+ /* Set the default CFI lock/unlock addresses */
+ cfi->addr_unlock1 = 0x555;
+ cfi->addr_unlock2 = 0x2aa;
+@@ -461,6 +476,7 @@
+ map_word d, t;
+
+ d = map_read(map, addr);
++ udelay(20); //Storlink SoC
+ t = map_read(map, addr);
+
+ return map_word_equal(map, d, t);
+@@ -626,7 +642,9 @@
+ default:
+ printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
+ }
++//****** Storlink SoC ******
+ wake_up(&chip->wq);
++//**************************
+ }
+
+ #ifdef CONFIG_MTD_XIP
+@@ -940,7 +958,9 @@
+ cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+
++//****** Storlink SoC ******
+ wake_up(&chip->wq);
++//**************************
+ spin_unlock(chip->mutex);
+
+ return 0;
+@@ -1005,7 +1025,10 @@
+ */
+ unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
+ int ret = 0;
+- map_word oldd;
++//****** Storlink SoC ******
++// map_word oldd;
++ map_word oldd, tmp;
++//**************************
+ int retry_cnt = 0;
+
+ adr += chip->start;
+@@ -1037,9 +1060,15 @@
+ ENABLE_VPP(map);
+ xip_disable(map, chip, adr);
+ retry:
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG /* Unlock bypass */
++ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#else
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ map_write(map, datum, adr);
+ chip->state = FL_WRITING;
+
+@@ -1072,7 +1101,13 @@
+ }
+
+ if (chip_ready(map, adr))
+- break;
++ {
++ tmp = map_read(map, adr);
++ if(map_word_equal(map, tmp, datum))
++// goto op_done;
++ break;
++
++ }
+
+ /* Latency issues. Drop the lock, wait a while and retry */
+ UDELAY(map, chip, adr, 1);
+@@ -1084,8 +1119,17 @@
+ /* FIXME - should have reset delay before continuing */
+
+ if (++retry_cnt <= MAX_WORD_RETRIES)
++ {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
++ //udelay(1);
++#endif
++ udelay(1);
+ goto retry;
+-
++ }
+ ret = -EIO;
+ }
+ xip_enable(map, chip, adr);
+@@ -1171,7 +1215,14 @@
+ return 0;
+ }
+ }
+-
++//****** Storlink SoC ******
++ map_write( map, CMD(0xF0), chipstart );
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++//**************************
+ /* We are now aligned, write as much as possible */
+ while(len >= map_bankwidth(map)) {
+ map_word datum;
+@@ -1181,7 +1232,15 @@
+ ret = do_write_oneword(map, &cfi->chips[chipnum],
+ ofs, datum);
+ if (ret)
++ {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ return ret;
++ }
+
+ ofs += map_bankwidth(map);
+ buf += map_bankwidth(map);
+@@ -1189,19 +1248,38 @@
+ len -= map_bankwidth(map);
+
+ if (ofs >> cfi->chipshift) {
++//****** Storlink SoC ******
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ chipnum ++;
+ ofs = 0;
+ if (chipnum == cfi->numchips)
+ return 0;
+ chipstart = cfi->chips[chipnum].start;
++#if FORCE_FAST_PROG
++ /* Go into unlock bypass mode for next set of chips */
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ }
+ }
+
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
++
+ /* Write the trailing bytes if any */
+ if (len & (map_bankwidth(map)-1)) {
+ map_word tmp_buf;
+
+ retry1:
++
+ spin_lock(cfi->chips[chipnum].mutex);
+
+ if (cfi->chips[chipnum].state != FL_READY) {
+@@ -1221,7 +1299,11 @@
+ #endif
+ goto retry1;
+ }
+-
++#if FORCE_FAST_PROG
++ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ tmp_buf = map_read(map, ofs + chipstart);
+
+ spin_unlock(cfi->chips[chipnum].mutex);
+@@ -1231,11 +1313,23 @@
+ ret = do_write_oneword(map, &cfi->chips[chipnum],
+ ofs, tmp_buf);
+ if (ret)
++ {
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ return ret;
+-
++ }
++#if FORCE_FAST_PROG
++ /* Get out of unlock bypass mode */
++ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
++ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
++#endif
+ (*retlen) += len;
+ }
+
++ map_write( map, CMD(0xF0), chipstart );
+ return 0;
+ }
+
+@@ -1275,6 +1369,7 @@
+ ENABLE_VPP(map);
+ xip_disable(map, chip, cmd_adr);
+
++ map_write( map, CMD(0xF0), chip->start ); //Storlink
+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
+ //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
+@@ -1535,6 +1630,9 @@
+ DECLARE_WAITQUEUE(wait, current);
+ int ret = 0;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
+ adr += chip->start;
+
+ spin_lock(chip->mutex);
+@@ -1613,6 +1711,9 @@
+ chip->state = FL_READY;
+ put_chip(map, chip, adr);
+ spin_unlock(chip->mutex);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+
+Index: linux-2.6.23.16/drivers/mtd/chips/map_serial.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/chips/map_serial.c 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,188 @@
++/*
++ * Common code to handle map devices which are simple ROM
++ * (C) 2000 Red Hat. GPL'd.
++ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
++ */
++
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <asm/io.h>
++
++#include <asm/byteorder.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++
++#include <asm/hardware.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/mtd.h>
++#include <linux/init.h> //add
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
++static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
++static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++static void mapserial_nop (struct mtd_info *);
++struct mtd_info *map_serial_probe(struct map_info *map);
++
++extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
++
++static struct mtd_chip_driver mapserial_chipdrv = {
++ probe: map_serial_probe,
++ name: "map_serial",
++ module: THIS_MODULE
++};
++
++struct mtd_info *map_serial_probe(struct map_info *map)
++{
++ struct mtd_info *mtd;
++
++ mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
++ if (!mtd)
++ return NULL;
++
++ memset(mtd, 0, sizeof(*mtd));
++
++ map->fldrv = &mapserial_chipdrv;
++ mtd->priv = map;
++ mtd->name = map->name;
++ mtd->type = MTD_OTHER;
++ mtd->erase = mapserial_erase;
++ mtd->size = map->size;
++ mtd->read = mapserial_read;
++ mtd->write = mapserial_write;
++ mtd->sync = mapserial_nop;
++ mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
++// mtd->erasesize = 512; // page size;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++ mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
++#else
++ mtd->erasesize = 0x1000; // block size;
++#endif
++
++ __module_get(THIS_MODULE);
++ //MOD_INC_USE_COUNT;
++ return mtd;
++}
++
++#define FLASH_ACCESS_OFFSET 0x00000010
++#define FLASH_ADDRESS_OFFSET 0x00000014
++#define FLASH_WRITE_DATA_OFFSET 0x00000018
++#define FLASH_READ_DATA_OFFSET 0x00000018
++
++static __u32 readflash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++static int mapserial_erase_block(struct map_info *map,unsigned int block)
++{
++
++ __u32 address;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++
++ if(!m25p80_sector_erase(block, 0))
++ return (MTD_ERASE_DONE);
++#else
++ __u32 opcode;
++ __u32 count=0;
++// __u8 status;
++
++ // printk("mapserial_erase_block : erase block %d \n",block);
++// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
++ opcode = 0x80000000 | 0x0200 | 0x50;
++ address = (block << 13);
++ writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
++ writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
++ opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ count++;
++ if (count > 10000)
++ {
++ return (MTD_ERASE_FAILED);
++ }
++ }
++ return (MTD_ERASE_DONE);
++#endif
++}
++
++static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++ unsigned int addr;
++ int len;
++ unsigned int block;
++ unsigned int ret=0;
++
++ addr = instr->addr;
++ len = instr->len;
++ while (len > 0)
++ {
++ block = addr / mtd->erasesize;
++#ifdef CONFIG_MTD_SL2312_SERIAL_ST
++ ret = mapserial_erase_block(map,addr);
++#else
++ ret = mapserial_erase_block(map,block);
++#endif
++ addr = addr + mtd->erasesize;
++ len = len - mtd->erasesize;
++ }
++ return (ret);
++}
++
++static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++// printk("mapserial_read : \n");
++ map->copy_from(map, buf, from, len);
++ *retlen = len;
++ return 0;
++}
++
++static void mapserial_nop(struct mtd_info *mtd)
++{
++ /* Nothing to see here */
++}
++
++static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
++{
++ struct map_info *map = (struct map_info *)mtd->priv;
++// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
++ //map->copy_to(map, buf, to, len);
++ map->copy_to(map, to, buf, len);
++ *retlen = len;
++ return 0;
++}
++
++int __init map_serial_init(void)
++{
++ register_mtd_chip_driver(&mapserial_chipdrv);
++ return 0;
++}
++
++static void __exit map_serial_exit(void)
++{
++ unregister_mtd_chip_driver(&mapserial_chipdrv);
++}
++
++module_init(map_serial_init);
++module_exit(map_serial_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
++MODULE_DESCRIPTION("MTD chip driver for ROM chips");
+Index: linux-2.6.23.16/drivers/mtd/maps/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/maps/Kconfig 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/maps/Kconfig 2008-03-15 17:03:17.874821522 +0200
+@@ -614,5 +614,30 @@
+
+ This selection automatically selects the map_ram driver.
+
++#***************************************************************************************
++# Storlink parallel/Serial Flash configuration
++#***************************************************************************************
++config MTD_SL2312_CFI
++ tristate "CFI Flash device mapped on SL2312"
++ depends on MTD_CFI
++ help
++ Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ATMEL
++ tristate "ATMEL Serial Flash device mapped on SL2312"
++ depends on MTD_PARTITIONS && ARCH_SL2312
++ help
++ Map driver for SL2312 demo board.
++
++config MTD_SL2312_SERIAL_ST
++ tristate "ST Serial Flash device mapped on SL2312"
++ depends on MTD_PARTITIONS && ARCH_SL2312
++ help
++ Map driver for SL2312 demo board.
++
++config SL2312_SHARE_PIN
++ tristate "Parallel Flash share pin on SL2312 ASIC"
++ depends on SL3516_ASIC
++
+ endmenu
+
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-atmel.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-atmel.c 2008-03-15 17:04:02.877385981 +0200
+@@ -0,0 +1,554 @@
++/*
++ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++#include <linux/init.h> //add
++
++
++#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11
++#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel
++
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++void address_to_page(__u32 address, __u16 *page, __u16 *offset)
++{
++ *page = address / SPAGE_SIZE;
++ *offset = address % SPAGE_SIZE;
++}
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++void atmel_read_status(__u8 cmd, __u8 *data)
++{
++ __u32 opcode;
++ __u32 value;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
++{
++ __u32 opcode;
++ __u32 address;
++ __u32 value;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
++ address = (page << g_page_addr) + offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++void buffer_to_main_memory(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++
++void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
++{
++ __u8 byte;
++ __u16 page, offset;
++ __u16 i;
++
++ address_to_page(address, &page, &offset);
++
++ for(i=0; i<len; i++,offset++)
++ {
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++ buffer [i]= byte;
++ }
++}
++
++void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len)
++{
++ __u8 pattern;
++ __u16 page, offset;
++ __u32 i;
++
++ address_to_page(address, &page, &offset);
++ // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page);
++
++ if(offset)
++ main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page);
++
++ for(i=0; i<len; i++,offset++)
++ {
++ pattern = buffer[i];
++ atmel_buffer_write(BUFFER1_WRITE,offset,pattern);
++ }
++
++ // printk("atmel_flash_program_page: offset %x \n", offset);
++ buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page);
++ // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page);
++
++}
++
++
++void main_memory_to_buffer(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
++ address = (page << g_page_addr) + offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++}
++
++void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data)
++{
++ __u32 opcode;
++ __u32 address;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
++ address = offset;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void atmel_erase_page(__u8 cmd, __u16 page)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (page << g_page_addr);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void atmel_erase_block(__u8 cmd, __u16 block)
++{
++ __u32 opcode;
++ __u32 address;
++ __u8 status;
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
++ address = (block << 13);
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(opcode&0x80000000)
++ {
++ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ atmel_read_status(READ_STATUS_SPI, &status);
++ while(!(status&0x80))
++ {
++ atmel_read_status(READ_STATUS_SPI, &status);
++ flash_delay();
++ schedule();
++ }
++
++}
++
++void flash_delay(void)
++{
++ int i;
++
++ for(i=0; i<50; i++)
++ i=i;
++}
++
++
++
++
++__u32 sl2312_read32(struct map_info *map, unsigned long ofs)
++{
++
++#if 0
++ __u16 page, offset;
++ __u32 pattern;
++ __u8 byte, i;
++
++ pattern = 0;
++ address_to_page(ofs, &page, &offset);
++ for(i=0; i<4; i++, offset++)
++ {
++ pattern = pattern << 8;
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte);
++ pattern += byte;
++ }
++ return pattern;
++#else
++ return read_flash_ctrl_reg(ofs);
++#endif
++
++}
++
++__u8 sl2312_read8(struct map_info *map, unsigned long ofs)
++{
++ __u16 page, offset;
++ __u8 byte;
++
++ address_to_page(ofs, &page, &offset);
++ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
++ //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte);
++ return byte;
++
++}
++
++void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs)
++{
++#if 0
++ __u16 page, offset;
++ __u8 byte, i;
++
++ address_to_page(ofs, &page, &offset);
++ for(i=0; i<4; i++, offset++)
++ {
++ byte = d & 0xff;
++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte);
++ d = d >> 8;
++//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte);
++ }
++#else
++ write_flash_ctrl_reg(ofs, d);
++#endif
++}
++
++void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
++{
++ __u16 page, offset;
++
++ address_to_page(ofs, &page, &offset);
++ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
++//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d);
++
++}
++
++void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++ __u32 size;
++ __u8 *buffer;
++ __u32 length;//i, j,
++
++ //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len);
++
++ length = len;
++ buffer = (__u8 *)buf;
++ while(len)
++ {
++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
++ if(size > len)
++ size = len;
++ atmel_flash_read_page(ofs, buffer, size);
++ buffer+=size;
++ ofs+=size;
++ len -= size;
++ }
++
++#if 0
++ buffer = (__u8 *)buf;
++ for(i=0; i<length; i+=16)
++ {
++ for(j=0; j<16; j++,buffer++)
++ {
++ if((i*16+j)<length)
++ printk("%x ",(int)*buffer);
++ }
++ printk("\n");
++ }
++
++ printk("\n");
++#endif
++
++}
++
++
++void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
++{
++ __u32 size;
++ __u8 *buffer;
++
++ buffer = (__u8 *)buf;
++ //printk("sl2312_copy_to:offset %x len %x \n", ofs, len);
++// printk("sl2312_copy_to:buf is %x \n", (int)buf);
++
++ while(len)
++ {
++ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
++ if(size > len)
++ size = len;
++ atmel_flash_program_page(ofs, buffer, size);
++ buffer+=size;
++ ofs+=size;
++ len-=size;
++ }
++
++
++}
++
++
++static struct mtd_info *serial_mtd;
++
++static struct mtd_partition *parsed_parts;
++
++static struct map_info sl2312_serial_map = {
++// name: "SL2312 serial flash",
++// size: 4194304, //0x400000,
++// //buswidth: 4,
++// bankwidth: 4,
++// phys: SL2312_FLASH_BASE,
++//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++// //read32: sl2312_read32,
++// //read8: sl2312_read8,
++// copy_from: sl2312_copy_from,
++// //write8: sl2312_write8,
++// //write32: sl2312_write32,
++// read: sl2312_read32,
++// write: sl2312_write32,
++// copy_to: sl2312_copy_to
++//#endif
++ .name = "SL2312 serial flash",
++ .size = 4194304, //0x400000,
++ //buswidth: 4,
++ .bankwidth = 4,
++ .phys = SL2312_FLASH_BASE,
++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++ //read32: sl2312_read32,
++ //read8: sl2312_read8,
++ .copy_from = sl2312_copy_from,
++ //write8: sl2312_write8,
++ //write32: sl2312_write32,
++ .read = sl2312_read32,
++ .write = sl2312_write32,
++ .copy_to = sl2312_copy_to
++#endif
++};
++
++
++
++static struct mtd_partition sl2312_partitions[] = {
++
++
++ ///* boot code */
++ //{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
++ ///* kernel image */
++ //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
++ ///* All else is writable (e.g. JFFS) */
++ //{ name: "user data", offset: 0x00300000, size: 0x00100000, },
++ /* boot code */
++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
++ /* kernel image */
++ { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
++ /* All else is writable (e.g. JFFS) */
++ { .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
++
++
++};
++
++
++
++static int __init init_sl2312_maps(void)
++{
++ int nr_parts = 0;
++ struct mtd_partition *parts;
++
++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!serial_mtd)
++ return NULL;
++
++ memset(serial_mtd, 0, sizeof(struct mtd_info));
++ //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++ //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
++ sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++ if (!sl2312_serial_map.virt) {
++ printk(" failed to ioremap \n");
++ return -EIO;
++ }
++ serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
++ if (serial_mtd) {
++ //serial_mtd->module = THIS_MODULE;
++ serial_mtd->owner = THIS_MODULE;
++
++ }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++ if (nr_parts > 0)
++ printk(KERN_NOTICE "Found RedBoot partition table.\n");
++ else if (nr_parts < 0)
++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++ parsed_parts = sl2312_partitions;
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++ if (nr_parts > 0)
++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++ else
++ add_mtd_device(serial_mtd);
++
++ return 0;
++}
++
++static void __exit cleanup_sl2312_maps(void)
++{
++ if (parsed_parts)
++ del_mtd_partitions(serial_mtd);
++ else
++ del_mtd_device(serial_mtd);
++
++ map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_maps);
++module_exit(cleanup_sl2312_maps);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-cfi.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-cfi.c 2008-03-15 17:04:09.377756409 +0200
+@@ -0,0 +1,370 @@
++/*======================================================================
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++======================================================================*/
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/string.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/system.h>
++#include <asm/arch/sl2312.h>
++#include <linux/mtd/kvctl.h>
++#include "sl2312_flashmap.h"
++
++
++//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
++
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++
++/* define read/write register utility */
++#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++
++/* the offset of FLASH control register */
++enum EMAC_REGISTER {
++ FLASH_ID = 0x0000,
++ FLASH_STATUS = 0x0008,
++ FLASH_TYPE = 0x000c,
++ FLASH_ACCESS = 0x0020,
++ FLASH_ADDRESS = 0x0024,
++ FLASH_DATA = 0x0028,
++ FLASH_TIMING = 0x002c,
++};
++
++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++static unsigned int flash_indirect_access = 0;
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++static unsigned int chip_en = 0x00000000;
++
++void sl2312flash_enable_parallel_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffd;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++
++void sl2312flash_disable_parallel_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val | 0x00000002;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++#endif
++
++
++static struct map_info sl2312flash_map =
++{
++ name: "SL2312 CFI Flash",
++ size: FLASH_SIZE,
++ bankwidth: 2,
++ //bankwidth: 1, //for 8 bits width
++ phys: SL2312_FLASH_BASE,
++};
++
++static struct mtd_info *mtd;
++#if 0
++static struct mtd_partition sl2312_partitions[] = {
++ /* boot code */
++ {
++ name: "bootloader",
++ offset: 0x00000000,
++ size: 0x20000,
++// mask_flags: MTD_WRITEABLE,
++ },
++ /* kernel image */
++ {
++ name: "kerel image",
++ offset: 0x00020000,
++ size: 0x2E0000
++ },
++ /* All else is writable (e.g. JFFS) */
++ {
++ name: "user data",
++ offset: 0x00300000,
++ size: 0x00100000,
++ }
++};
++#endif
++
++
++
++static int __init sl2312flash_init(void)
++{
++ struct mtd_partition *parts;
++ int nr_parts = 0;
++ int ret;
++#ifndef CONFIG_SL2312_SHARE_PIN
++ unsigned int reg_val;
++#endif
++
++ printk("SL2312 MTD Driver Init.......\n");
++
++#ifndef CONFIG_SL2312_SHARE_PIN
++ /* enable flash */
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffd;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++#else
++ sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */
++#endif
++ FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
++ ret = FLASH_READ_REG(FLASH_ACCESS);
++ if (ret == 0x00004000)
++ {
++ flash_indirect_access = 0; /* parallel flash direct access */
++ }
++ else
++ {
++ flash_indirect_access = 1; /* parallel flash indirect access */
++ }
++
++ /*
++ * Also, the CFI layer automatically works out what size
++ * of chips we have, and does the necessary identification
++ * for us automatically.
++ */
++#ifdef CONFIG_GEMINI_IPI
++ sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#else
++ sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
++#endif
++ //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt);
++
++// simple_map_init(&sl2312flash_map);
++
++ mtd = do_map_probe("cfi_probe", &sl2312flash_map);
++ if (!mtd)
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
++#endif
++ return -ENXIO;
++ }
++ mtd->owner = THIS_MODULE;
++// mtd->erase = flash_erase;
++// mtd->read = flash_read;
++// mtd->write = flash_write;
++
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++ ret = add_mtd_partitions(mtd, parts, nr_parts);
++ /*If we got an error, free all resources.*/
++ if (ret < 0) {
++ del_mtd_partitions(mtd);
++ map_destroy(mtd);
++ }
++#ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
++#endif
++ printk("SL2312 MTD Driver Init Success ......\n");
++ return ret;
++}
++
++static void __exit sl2312flash_exit(void)
++{
++ if (mtd) {
++ del_mtd_partitions(mtd);
++ map_destroy(mtd);
++ }
++
++ if (sl2312flash_map.virt) {
++ iounmap((void *)sl2312flash_map.virt);
++ sl2312flash_map.virt = 0;
++ }
++}
++
++char chrtohex(char c)
++{
++ char val;
++ if ((c >= '0') && (c <= '9'))
++ {
++ val = c - '0';
++ return val;
++ }
++ else if ((c >= 'a') && (c <= 'f'))
++ {
++ val = 10 + (c - 'a');
++ return val;
++ }
++ else if ((c >= 'A') && (c <= 'F'))
++ {
++ val = 10 + (c - 'A');
++ return val;
++ }
++ printk("<1>Error number\n");
++ return 0;
++}
++
++
++int get_vlaninfo(vlaninfo* vlan)
++{
++ vctl_mheader head;
++ vctl_entry entry;
++ struct mtd_info *mymtd=NULL;
++ int i, j, loc = 0;
++ char *payload=0, *tmp1, *tmp2, tmp3[9];
++ size_t retlen;
++
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_enable_parallel_flash();
++ #endif
++ for(i=0;i<MAX_MTD_DEVICES;i++)
++ {
++ mymtd=get_mtd_device(NULL,i);
++ // printk("mymtd->name: %s\n", mymtd->name);
++ if(mymtd && !strcmp(mymtd->name,"VCTL"))
++ {
++ // printk("%s\n", mymtd->name);
++ break;
++ }
++ }
++ if( i >= MAX_MTD_DEVICES)
++ {
++ printk("Can't find version control\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++
++ if (!mymtd | !mymtd->read)
++ {
++ printk("<1>Can't read Version Configuration\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++
++ mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
++ // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
++ // printk("entry number: %x\n", head.entry_num);
++ if ( strncmp(head.header, "FLFM", 4) )
++ {
++ printk("VCTL is a erase block\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++ }
++ loc += retlen;
++ for (i = 0; i < head.entry_num; i++)
++ {
++ mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
++ // printk("type: %x\n", entry.type);
++ // printk("size: %x\n", entry.size);
++ strncpy(tmp3, entry.header, 4);
++ if (entry.type == VCT_VLAN)
++ {
++ for (j = 0; j < 6 ; j++)
++ {
++ vlan[0].mac[j] = 0;
++ vlan[1].mac[j] = 0;
++ }
++ vlan[0].vlanid = 1;
++ vlan[1].vlanid = 2;
++ vlan[0].vlanmap = 0x7F;
++ vlan[1].vlanmap = 0x80;
++
++ payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
++ loc += VCTL_ENTRY_LEN;
++ mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
++ // printk("%s\n", payload);
++ tmp1 = strstr(payload, "MAC1:");
++ tmp2 = strstr(payload, "MAC2:");
++ if(!tmp1||!tmp2){
++ kfree(payload);
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ printk("Error VCTL format!!\n");
++ return 0;
++ }
++ tmp1 += 7;
++ tmp2 += 7;
++
++
++ for (j = 0; j < 6; j++)
++ {
++ vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
++ vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
++ }
++ tmp1 = strstr(payload, "ID1:");
++ tmp2 = strstr(payload, "ID2:");
++ tmp1 += 4;
++ tmp2 += 4;
++ vlan[0].vlanid = tmp1[0] - '0';
++ vlan[1].vlanid = tmp2[0] - '0';
++ tmp1 = strstr(payload, "MAP1:");
++ tmp2 = strstr(payload, "MAP2:");
++ tmp1 += 7;
++ tmp2 += 7;
++ vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
++ vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
++ // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
++ // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
++ break;
++ }
++ loc += entry.size;
++ }
++ if ( entry.type == VCT_VLAN )
++ {
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ kfree(payload);
++ return 1;
++ }
++ if (i >= head.entry_num)
++ printk("Can't find vlan information\n");
++ #ifdef CONFIG_SL2312_SHARE_PIN
++ sl2312flash_disable_parallel_flash();
++ #endif
++ return 0;
++}
++
++EXPORT_SYMBOL(get_vlaninfo);
++
++
++module_init(sl2312flash_init);
++module_exit(sl2312flash_exit);
++
++MODULE_AUTHOR("Storlink Ltd");
++MODULE_DESCRIPTION("CFI map driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-m25p80.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312-flash-m25p80.c 2008-03-15 17:04:15.378098557 +0200
+@@ -0,0 +1,498 @@
++/*
++ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
++ *
++ * Flash and EPROM on Hitachi Solution Engine and similar boards.
++ *
++ * (C) 2001 Red Hat, Inc.
++ *
++ * GPL'd
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++
++#include <asm/io.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/sl2312.h>
++#include <asm/arch/flash.h>
++#include <linux/init.h> //add
++#define g_chipen SERIAL_FLASH_CHIP0_EN //ST
++
++//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
++extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
++
++
++static __u32 read_flash_ctrl_reg(__u32 ofs)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ return __raw_readl(base);
++}
++
++static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
++{
++ __u32 *base;
++
++ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
++ __raw_writel(data, base);
++}
++
++static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
++{
++ __u32 opcode,status;
++ __u32 value;
++
++ //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(status&0x80000000)
++ {
++ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ *data = value & 0xff;
++}
++
++static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
++{
++ __u32 opcode;
++ __u32 status;
++ __u32 tmp;
++ int res = FLASH_ERR_OK;
++ //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //middle delay_ms(130);
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++
++
++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++ ////middle delay_ms(10);
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
++
++ //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status!=data)
++ //{
++ // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ // //middle delay_ms(10);
++ //}
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status&0xfd)
++ while(status&0x01)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" m25p80_page_program Protect Status = %x\n",status);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ //printf("status = %x, data = %x\n",status,data);
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++ //};//while (len > 0)
++ return res;
++}
++
++void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
++{
++// __u32 size;
++ __u8 *buffer;
++ __u32 length;//i, j,
++
++ length = len;
++ buffer = (__u8 *)buf;
++ while(len)
++ {
++ m25p80_read(ofs, buffer, g_chipen);
++ buffer++;
++ ofs++;
++ len --;
++ } ;
++
++}
++
++__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
++{
++
++ return read_flash_ctrl_reg(ofs);
++
++
++}
++
++void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
++{
++
++ write_flash_ctrl_reg(ofs, d);
++
++}
++
++void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
++{
++ __u32 size, i, ret;
++
++ while(len > 0)
++ {
++ if(len >= M25P80_PAGE_SIZE)
++ size = M25P80_PAGE_SIZE;
++ else
++ size = len;
++
++ for(i=0;i<size;i++)
++ {
++ ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen);
++ }
++ buf+=M25P80_PAGE_SIZE;
++ ofs+=M25P80_PAGE_SIZE;
++ len-=M25P80_PAGE_SIZE;
++
++ };
++
++
++}
++
++static struct mtd_info *serial_mtd;
++
++static struct mtd_partition *parsed_parts;
++
++static struct map_info m25p80_map = {
++
++ .name = "SL2312 serial flash m25p80",
++ .size = 1048576, //0x100000,
++ //buswidth: 4,
++ .bankwidth = 4,
++ .phys = SL2312_FLASH_BASE,
++#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
++ .copy_from = m25p80_copy_from,
++ .read = m25p80_read32,
++ .write = m25p80_write32,
++ .copy_to = m25p80_copy_to
++#endif
++};
++
++
++
++static struct mtd_partition m25p80_partitions[] = {
++
++ /* boot code */
++ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
++ /* kernel image */
++ { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 },
++ /* All else is writable (e.g. JFFS) */
++ { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, },
++
++
++};
++
++void flash_delay()
++{
++ int i,j;
++ for(i=0;i<0x100;i++)
++ j=i*3+5;
++}
++
++int m25p80_sector_erase(__u32 address, __u32 schip_en)
++{
++ __u32 opcode;
++ __u32 status;
++ __u32 tmp;
++ int res = FLASH_ERR_OK;
++ //printf("\n-->m25p80_sector_erase");
++ if(address >= FLASH_START)
++ address-=FLASH_START;
++
++ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
++ //printf("\n m25p80_sector_erase : after we-en");
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
++ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
++ #ifdef MIDWAY_DIAG
++ opcode|=schip_en;
++ #endif
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++ #ifdef MIDWAY_DIAG
++ opcode|=schip_en;
++ #endif
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //while(status&0xfd)
++ while(status&0x01)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" m25p80_sector_erase Protect Status = %x\n",status);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ if((status&0x02)==0x02)
++ {
++ //middle delay_ms(100);
++ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
++ }
++ //printf("\n<--m25p80_sector_erase");
++ return res;
++}
++
++static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
++{
++ __u32 opcode,tmp;
++ __u32 status;
++
++
++
++
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //////
++ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
++
++ opcode|=g_chipen;
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ //middle delay_ms(130);
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\ncmd =%x status = %x",cmd,status);
++ if(cmd==M25P80_WRITE_ENABLE)
++ {
++ //printf("\n**-->enable** status = %x",status);
++ //middle delay_ms(100);
++ while((status&0x03) != 2)
++ {
++ //if((status&0x9c)!=0)
++ // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status);
++
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ //flash_delay();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\n**enable** status = %x",status);
++ flash_delay();
++ schedule();
++ //middle delay_ms(100);
++ }
++ }
++ else if(cmd==M25P80_WRITE_DISABLE)
++ {
++ //while((status&0x03) == 2)
++ // printf("\n**disable** status = %x",status);
++ //middle delay_ms(100);
++ while((status&0x03) != 0)
++ {
++ //m25p80_write_status((status&0xfd),schip_en);
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ //printf("\n**disable** status = %x",status);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ }
++ else
++ {
++ //while((status&0x01) !=0)
++ while((status&0x01) !=0)
++ {
++ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ while(tmp&0x80000000)
++ {
++ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
++ flash_delay();
++ schedule();
++ }
++ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
++ flash_delay();
++ schedule();
++ //middle delay_ms(50);
++ }
++ }
++ //////
++
++ //printf("\n<-- status = %x",status);
++}
++
++static int __init init_sl2312_m25p80(void)
++{
++ int nr_parts = 0;
++ struct mtd_partition *parts;
++
++ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
++ if (!serial_mtd)
++ return NULL;
++
++ memset(serial_mtd, 0, sizeof(struct mtd_info));
++ m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
++ if (!m25p80_map.virt) {
++ printk(" failed to ioremap \n");
++ return -EIO;
++ }
++ serial_mtd = do_map_probe("map_serial", &m25p80_map);
++ if (serial_mtd) {
++ serial_mtd->owner = THIS_MODULE;
++
++ }
++
++#ifdef CONFIG_MTD_REDBOOT_PARTS
++ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
++ if (nr_parts > 0)
++ printk(KERN_NOTICE "Found RedBoot partition table.\n");
++ else if (nr_parts < 0)
++ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
++#else
++ parsed_parts = m25p80_partitions;
++ parts = m25p80_partitions;
++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
++ nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
++#endif /* CONFIG_MTD_REDBOOT_PARTS */
++
++ if (nr_parts > 0)
++ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
++ else
++ add_mtd_device(serial_mtd);
++
++ return 0;
++}
++
++static void __exit cleanup_sl2312_m25p80(void)
++{
++ if (parsed_parts)
++ del_mtd_partitions(serial_mtd);
++ else
++ del_mtd_device(serial_mtd);
++
++ map_destroy(serial_mtd);
++
++
++}
++
++module_init(init_sl2312_m25p80);
++module_exit(cleanup_sl2312_m25p80);
++
++
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
++MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
++
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00100000, },
++ { name: "Ramdisk", offset: 0x00120000, size: 0x00500000, },
++ { name: "etc", offset: 0x00620000, size: 0x001A0000, },
++ { name: "VCTL", offset: 0x007C0000, size: 0x00010000, },
++ { name: "cfg", offset: 0x007D0000, size: 0x00020000, },
++ { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
++};
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.16MB
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.16MB 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00300000, },
++ { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, },
++ { name: "Application", offset: 0x00920000, size: 0x00600000, },
++ { name: "VCTL", offset: 0x00F20000, size: 0x00020000, },
++ { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, },
++ { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
++};
+Index: linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.8MB
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/maps/sl2312_flashmap.h.8MB 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,21 @@
++/*
++ * Please note that the name are used in mkflash script. Therefore
++ * don't change them. If you want to add different partitions, you
++ * will need to modify mkflash script as well so that the end image
++ * is what you include here!
++ *
++ * Also, the 7th item is always the size, so please don't add extra
++ * spaces in the name or other items.
++ *
++ * - Alan
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
++ { name: "Application", offset: 0x004A0000, size: 0x00300000, },
++ { name: "VCTL", offset: 0x007A0000, size: 0x00020000, },
++ { name: "CurConf", offset: 0x007C0000, size: 0x00020000, },
++ { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
++};
+Index: linux-2.6.23.16/drivers/mtd/mtdchar.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/mtdchar.c 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/mtdchar.c 2008-03-15 17:03:17.874821522 +0200
+@@ -59,6 +59,77 @@
+ enum mtd_file_modes mode;
+ };
+
++/***********************************************************************
++/* Storlink SoC -- flash
++/***********************************************************************/
++#ifdef CONFIG_SL2312_SHARE_PIN
++unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
++unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE
++static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
++EXPORT_SYMBOL(share_pin_flag);
++int dbg=0;
++DECLARE_WAIT_QUEUE_HEAD(wq);
++extern struct wait_queue_head_t *flash_wait;
++unsigned int flash_req=0;
++void mtd_lock()
++{
++ struct task_struct *tsk = current;
++ unsigned int value ;
++ unsigned long flags;
++ flash_req = 1;
++ DECLARE_WAITQUEUE(wait, tsk);
++ add_wait_queue(&wq, &wait);
++ for(;;)
++ {
++ set_task_state(tsk, TASK_INTERRUPTIBLE);
++ spin_lock_irqsave(&sl2312_flash_lock,flags);
++ if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++ check_sleep_flag |= 0x00000001;
++ if(dbg)
++ printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
++ wake_up_interruptible(&flash_wait);
++ schedule();
++ }
++ else {
++ check_sleep_flag &= ~0x01;
++ share_pin_flag |= 0x00000001 ; // set share pin flag
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ value = value & (~PFLASH_SHARE_BIT) ;
++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ if(dbg)
++ printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
++ tsk->state = TASK_RUNNING;
++ remove_wait_queue(&wq, &wait);
++ return ;
++ }
++ }
++}
++
++void mtd_unlock()
++{
++ unsigned int value ;
++ unsigned long flags;
++
++ spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ
++ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs
++ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
++ share_pin_flag &= ~(0x00000001); // clear share pin flag
++ check_sleep_flag &= ~0x00000001;
++ spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ
++ if (check_sleep_flag & 0x00000002)
++ {
++ check_sleep_flag &= ~(0x00000002);
++ wake_up_interruptible(&flash_wait);
++ }
++ DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
++ flash_req = 0;
++}
++#endif
++/***********************************************************************/
++
+ static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
+ {
+ struct mtd_file_info *mfi = file->private_data;
+@@ -162,13 +233,21 @@
+ int len;
+ char *kbuf;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
+
+ if (*ppos + count > mtd->size)
+ count = mtd->size - *ppos;
+
+- if (!count)
++ if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return 0;
++ }
+
+ /* FIXME: Use kiovec in 2.5 to lock down the user's buffers
+ and pass them directly to the MTD functions */
+@@ -178,8 +257,12 @@
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+- if (!kbuf)
++ if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+
+ while (count) {
+
+@@ -224,6 +307,9 @@
+ *ppos += retlen;
+ if (copy_to_user(buf, kbuf, retlen)) {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+ else
+@@ -235,13 +321,19 @@
+ count = 0;
+ }
+ else {
+- kfree(kbuf);
++ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+
+ }
+
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return total_retlen;
+ } /* mtd_read */
+
+@@ -255,24 +347,40 @@
+ int ret=0;
+ int len;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
+
+- if (*ppos == mtd->size)
++ if (*ppos == mtd->size){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOSPC;
++ }
+
+ if (*ppos + count > mtd->size)
+ count = mtd->size - *ppos;
+
+- if (!count)
++ if (!count){
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return 0;
++ }
+
+ if (count > MAX_KMALLOC_SIZE)
+ kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
+ else
+ kbuf=kmalloc(count, GFP_KERNEL);
+
+- if (!kbuf)
++ if (!kbuf) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+
+ while (count) {
+
+@@ -283,6 +391,9 @@
+
+ if (copy_from_user(kbuf, buf, len)) {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+
+@@ -323,11 +434,17 @@
+ }
+ else {
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
+ }
+ }
+
+ kfree(kbuf);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return total_retlen;
+ } /* mtd_write */
+
+@@ -381,36 +498,67 @@
+ u_long size;
+ struct mtd_info_user info;
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_lock(); // sl2312 share pin lock
++#endif
++
+ DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
+
+ size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
+ if (cmd & IOC_IN) {
+ if (!access_ok(VERIFY_READ, argp, size))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ }
+ if (cmd & IOC_OUT) {
+ if (!access_ok(VERIFY_WRITE, argp, size))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ }
+
+ switch (cmd) {
+ case MEMGETREGIONCOUNT:
+ if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ break;
+
+ case MEMGETREGIONINFO:
+ {
+ struct region_info_user ur;
+
+- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
++ if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (ur.regionindex >= mtd->numeraseregions)
++ if (ur.regionindex >= mtd->numeraseregions) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+ if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
+- sizeof(struct mtd_erase_region_info)))
++ sizeof(struct mtd_erase_region_info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ break;
+ }
+
+@@ -433,7 +581,12 @@
+ struct erase_info *erase;
+
+ if(!(file->f_mode & 2))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EPERM;
++ }
+
+ erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
+ if (!erase)
+@@ -447,6 +600,9 @@
+ if (copy_from_user(&erase->addr, argp,
+ sizeof(struct erase_info_user))) {
+ kfree(erase);
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+ }
+ erase->mtd = mtd;
+@@ -484,14 +640,26 @@
+ struct mtd_oob_buf buf;
+ struct mtd_oob_ops ops;
+
+- if(!(file->f_mode & 2))
++ if(!(file->f_mode & 2)) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EPERM;
++ }
+
+- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (buf.length > 4096)
++ if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+
+ if (!mtd->write_oob)
+ ret = -EOPNOTSUPP;
+@@ -499,8 +667,12 @@
+ ret = access_ok(VERIFY_READ, buf.ptr,
+ buf.length) ? 0 : EFAULT;
+
+- if (ret)
++ if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
++ }
+
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -536,19 +708,35 @@
+ struct mtd_oob_buf buf;
+ struct mtd_oob_ops ops;
+
+- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
++ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+- if (buf.length > 4096)
++ if (buf.length > 4096) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
++ }
+
+- if (!mtd->read_oob)
++ if (!mtd->read_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ ret = -EOPNOTSUPP;
++ }
+ else
+ ret = access_ok(VERIFY_WRITE, buf.ptr,
+ buf.length) ? 0 : -EFAULT;
+- if (ret)
++ if (ret) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return ret;
++ }
+
+ ops.ooblen = buf.length;
+ ops.ooboffs = buf.start & (mtd->oobsize - 1);
+@@ -580,7 +768,12 @@
+ struct erase_info_user info;
+
+ if (copy_from_user(&info, argp, sizeof(info)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ if (!mtd->lock)
+ ret = -EOPNOTSUPP;
+@@ -594,7 +787,12 @@
+ struct erase_info_user info;
+
+ if (copy_from_user(&info, argp, sizeof(info)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ if (!mtd->unlock)
+ ret = -EOPNOTSUPP;
+@@ -629,11 +827,21 @@
+ loff_t offs;
+
+ if (copy_from_user(&offs, argp, sizeof(loff_t)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ if (!mtd->block_isbad)
+ ret = -EOPNOTSUPP;
+ else
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return mtd->block_isbad(mtd, offs);
++ }
+ break;
+ }
+
+@@ -642,11 +850,21 @@
+ loff_t offs;
+
+ if (copy_from_user(&offs, argp, sizeof(loff_t)))
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+ if (!mtd->block_markbad)
+ ret = -EOPNOTSUPP;
+ else
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return mtd->block_markbad(mtd, offs);
++ }
+ break;
+ }
+
+@@ -654,8 +872,12 @@
+ case OTPSELECT:
+ {
+ int mode;
+- if (copy_from_user(&mode, argp, sizeof(int)))
++ if (copy_from_user(&mode, argp, sizeof(int))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
++ }
+
+ mfi->mode = MTD_MODE_NORMAL;
+
+@@ -670,7 +892,12 @@
+ {
+ struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
+ if (!buf)
++ {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -ENOMEM;
++ }
+ ret = -EOPNOTSUPP;
+ switch (mfi->mode) {
+ case MTD_MODE_OTP_FACTORY:
+@@ -701,12 +928,24 @@
+ {
+ struct otp_info info;
+
+- if (mfi->mode != MTD_MODE_OTP_USER)
++ if (mfi->mode != MTD_MODE_OTP_USER) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EINVAL;
+- if (copy_from_user(&info, argp, sizeof(info)))
++ }
++ if (copy_from_user(&info, argp, sizeof(info))) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EFAULT;
+- if (!mtd->lock_user_prot_reg)
++ }
++ if (!mtd->lock_user_prot_reg) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EOPNOTSUPP;
++ }
+ ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
+ break;
+ }
+@@ -742,8 +981,12 @@
+ break;
+
+ case MTD_MODE_RAW:
+- if (!mtd->read_oob || !mtd->write_oob)
++ if (!mtd->read_oob || !mtd->write_oob) {
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
+ return -EOPNOTSUPP;
++ }
+ mfi->mode = arg;
+
+ case MTD_MODE_NORMAL:
+@@ -766,6 +1009,10 @@
+ ret = -ENOTTY;
+ }
+
++#ifdef CONFIG_SL2312_SHARE_PIN
++ mtd_unlock(); // sl2312 share pin lock
++#endif
++
+ return ret;
+ } /* memory_ioctl */
+
+Index: linux-2.6.23.16/drivers/mtd/nand/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/nand/Kconfig 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/nand/Kconfig 2008-03-15 17:03:17.874821522 +0200
+@@ -44,6 +44,13 @@
+ This enables the driver for the autronix autcpu12 board to
+ access the SmartMediaCard.
+
++config MTD_NAND_SL2312
++ tristate "NAND Flash device on Storlink board"
++ depends on ARM && MTD_NAND && ARCH_SL2312
++ help
++ This enables the driver for the Storlink board to
++ access the nand device.
++
+ config MTD_NAND_EDB7312
+ tristate "Support for Cirrus Logic EBD7312 evaluation board"
+ depends on ARCH_EDB7312
+Index: linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.c 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,2287 @@
++/*
++ * drivers/mtd/sl2312.c
++ *
++ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
++ *
++ * Copyright (C) 2001 Toshiba Corporation
++ *
++ * 2003 (c) MontaVista Software, Inc. This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ *
++ */
++
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++#include <linux/delay.h>
++#include <asm/io.h>
++#include <asm/hardware.h>
++#include <asm/arch/sl2312.h>
++#include "sl2312-flash-nand.h"
++
++
++#include <linux/errno.h>
++#include <linux/sched.h>
++#include <linux/types.h>
++#include <linux/mtd/compatmac.h>
++#include <linux/interrupt.h>
++#include <linux/bitops.h>
++
++
++/*
++ * NAND low-level MTD interface functions
++ */
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
++
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
++ unsigned long count, loff_t to, size_t * retlen);
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
++ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
++static void sl2312_nand_sync (struct mtd_info *mtd);
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel);
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
++
++/*
++ * MTD structure for sl2312 NDFMC
++ */
++static struct mtd_info *sl2312_mtd = NULL;
++static int nand_page=0,nand_col=0;
++
++/* Define default oob placement schemes for large and small page devices */
++static struct nand_oobinfo nand_oob_8 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 3,
++ .eccpos = {0, 1, 2},
++ .oobfree = { {3, 2}, {6, 2} }
++};
++
++static struct nand_oobinfo nand_oob_16 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 6,
++ .eccpos = {0, 1, 2, 3, 6, 7},
++ .oobfree = { {8, 8} }
++};
++
++static struct nand_oobinfo nand_oob_64 = {
++ .useecc = MTD_NANDECC_AUTOPLACE,
++ .eccbytes = 24,
++ .eccpos = {
++ 40, 41, 42, 43, 44, 45, 46, 47,
++ 48, 49, 50, 51, 52, 53, 54, 55,
++ 56, 57, 58, 59, 60, 61, 62, 63},
++ .oobfree = { {2, 38} }
++};
++
++
++/*
++ * Define partitions for flash device
++ */
++/* the base address of FLASH control register */
++#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
++#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
++//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE))
++#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE)
++static unsigned int CHIP_EN;
++/* define read/write register utility */
++//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
++//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
++//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
++
++unsigned int FLASH_READ_REG(unsigned int addr)
++{
++ unsigned int *base;
++ unsigned int data;
++
++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++ data = *base;
++ return (data);
++}
++
++void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
++{
++ unsigned int *base;
++
++ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
++ *base = data;
++ return;
++}
++
++unsigned int FLASH_READ_DATA(unsigned int addr)
++{
++ unsigned char *base;
++ unsigned int data;
++
++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++ data = *base;
++ return (data);
++}
++
++void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
++{
++ unsigned char *base;
++
++ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
++ *base = data;
++ return;
++}
++
++/* the offset of FLASH control register */
++enum NFLASH_REGISTER {
++ NFLASH_ID = 0x0000,
++ NFLASH_STATUS = 0x0008,
++ NFLASH_TYPE = 0x000c,
++ NFLASH_ACCESS = 0x0030,
++ NFLASH_COUNT = 0x0034,
++ NFLASH_CMD_ADDR = 0x0038,
++ NFLASH_ADDRESS = 0x003C,
++ NFLASH_DATA = 0x0040,
++ NFLASH_TIMING = 0x004C,
++ NFLASH_ECC_STATUS = 0x0050,
++ NFLASH_ECC_CONTROL = 0x0054,
++ NFLASH_ECC_OOB = 0x005c,
++ NFLASH_ECC_CODE_GEN0 = 0x0060,
++ NFLASH_ECC_CODE_GEN1 = 0x0064,
++ NFLASH_ECC_CODE_GEN2 = 0x0068,
++ NFLASH_ECC_CODE_GEN3 = 0x006C,
++ NFLASH_FIFO_CONTROL = 0x0070,
++ NFLASH_FIFO_STATUS = 0x0074,
++ NFLASH_FIFO_ADDRESS = 0x0078,
++ NFLASH_FIFO_DATA = 0x007c,
++};
++
++
++
++//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
++//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
++
++//#define FLASH_PART_SIZE 8388608
++
++//static unsigned int flash_indirect_access = 0;
++
++
++#ifdef CONFIG_SL2312_SHARE_PIN
++void sl2312flash_enable_nand_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val & 0xfffffffb;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++
++void sl2312flash_disable_nand_flash(void)
++{
++ unsigned int reg_val;
++
++ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
++ reg_val = reg_val | 0x00000004;
++ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
++ return;
++}
++#endif
++
++extern struct nand_oobinfo jffs2_oobinfo;
++/*
++ * Define partitions for flash devices
++ */
++
++static struct mtd_partition sl2312_partitions[] = {
++ { name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
++ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
++ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
++ { name: "Application", offset: 0x004A0000, size: 0x00320000, },
++ { name: "VCTL", offset: 0x007C0000, size: 0x20000, },
++ { name: "CurConf", offset: 0x007E0000, size: 0x20000, },
++ { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
++
++};
++
++
++/*
++ * hardware specific access to control-lines
++*/
++static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
++{
++
++ return ;
++}
++
++static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
++{
++ return 0;
++}
++
++/**
++ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
++ * @mtd: MTD device structure
++ * @ofs: offset relative to mtd start
++ */
++static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
++{
++ /* Check for invalid offset */
++ if (ofs > mtd->size)
++ return -EINVAL;
++
++ return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
++}
++
++/**
++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
++ * @mtd: MTD device structure
++ * @ofs: offset from device start
++ * @getchip: 0, if the chip is already selected
++ * @allowbbt: 1, if its allowed to access the bbt area
++ *
++ * Check, if the block is bad. Either by reading the bad block table or
++ * calling of the scan function.
++ */
++
++static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
++{
++ int opcode;
++ /* Send commands to erase a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++
++ if(mtd->oobblock > 528)
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
++ else
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++ FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++
++
++
++ /* read maker code */
++ opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ //cond_resched();
++ }
++}
++
++void sl2312_flash_delay(void)
++{
++ int i;
++
++ for(i=0; i<50; i++)
++ i=i;
++}
++
++static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
++{
++ struct nand_chip *this = mtd->priv;
++
++ if (!this->bbt)
++ return this->block_bad(mtd, ofs, getchip);
++
++ /* Return info from the table */
++ return nand_isbad_bbt (mtd, ofs, allowbbt);
++}
++
++/**
++ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
++ * @mtd: MTD device structure
++ * @ofs: offset relative to mtd start
++ */
++static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
++{
++ struct nand_chip *this = mtd->priv;
++ int ret;
++
++ if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
++ /* If it was bad already, return success and do nothing. */
++ if (ret > 0)
++ return 0;
++ return ret;
++ }
++
++ return this->block_markbad(mtd, ofs);
++}
++
++/*
++ * Get chip for selected access
++ */
++static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
++{
++
++ DECLARE_WAITQUEUE (wait, current);
++
++ /*
++ * Grab the lock and see if the device is available
++ * For erasing, we keep the spinlock until the
++ * erase command is written.
++ */
++retry:
++ spin_lock_bh (&this->chip_lock);
++
++ if (this->state == FL_READY) {
++ this->state = new_state;
++ if (new_state != FL_ERASING)
++ spin_unlock_bh (&this->chip_lock);
++ return;
++ }
++
++ if (this->state == FL_ERASING) {
++ if (new_state != FL_ERASING) {
++ this->state = new_state;
++ spin_unlock_bh (&this->chip_lock);
++ this->select_chip(mtd, 0); /* select in any case */
++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++ return;
++ }
++ }
++
++ set_current_state (TASK_UNINTERRUPTIBLE);
++ add_wait_queue (&this->wq, &wait);
++ spin_unlock_bh (&this->chip_lock);
++ schedule ();
++ remove_wait_queue (&this->wq, &wait);
++ goto retry;
++}
++
++/*
++* read device ready pin
++*/
++static int sl2312_device_ready(struct mtd_info *mtd)
++{
++ int ready;
++
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++ ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, ready);
++
++ while(ready&0x80000000) //polling flash access 31b
++ {
++ ready=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
++ return ready;
++}
++void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
++{
++ /* reset first */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++}
++
++
++void sl2312_device_setup(void)
++{
++
++}
++static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
++{
++
++ unsigned int data=0, page=0, col=0, tmp, i;
++
++ printk ("**************************sl2312_nand_read_byte !! \n");
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++ {
++ if(i==col)
++ data = FLASH_READ_DATA(page*mtd->oobblock +i);
++ else
++ tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
++ }
++ return data&0xff;
++}
++
++static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
++{
++ //struct nand_chip *this = mtd->priv;
++ unsigned int page=0, col=0, i;
++ u_char *databuf,oobbuf[mtd->oobsize];
++ size_t retlen;
++ retlen=0;
++ printk ("********************sl2312_nand_write_byte !! \n");
++ page = nand_page;
++ col = nand_col;
++ databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
++
++ if (!databuf) {
++ printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++
++ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
++ databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
++
++ databuf[col] = byte;
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
++
++}
++
++static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++ int i, page=0,col=0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++ size_t retlen;
++ retlen=0;
++
++
++ printk ("***********************sl2312_nand_write_buf !! \n");
++ databuf = &(this->data_buf[0]);
++ oobbuf = &(this->data_buf[mtd->oobblock]);
++ for (i = 0; i < mtd->oobsize; i++)
++ oobbuf[i] = 0xff;
++
++ if(len < mtd->oobblock)
++ {
++ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
++
++ for(i=col;i<len;i++)
++ databuf[col+i] = buf[i];
++
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
++
++ }
++
++}
++
++static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++ int i, page=0,col=0,addr=0,tmp=0;
++ //struct nand_chip *this = mtd->priv;
++ printk ("********************sl2312_nand_read_buf !! \n");
++ if(len < mtd->oobblock)
++ {
++ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
++ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
++ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
++ page = nand_page;
++ col = nand_col;
++ for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
++ {
++ if(i<len)
++ buf[i] = FLASH_READ_DATA(addr+i);
++ else
++ tmp = FLASH_READ_DATA(addr+i);
++ }
++ }
++}
++
++static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
++{
++ int i;
++ //struct nand_chip *this = mtd->priv;
++ u_char *datatmp, *oobtmp;
++ size_t retlen;
++ retlen=0;
++
++ datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
++ oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++ if ((!datatmp)||(!oobtmp)) {
++ printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++ //page = nand_page;
++ for(i=0;i<mtd->oobblock;i++)
++ datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
++ /* read oobdata */
++ for (i = 0; i < mtd->oobsize; i++)
++ oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
++
++ if(len==mtd->oobblock)
++ {
++ for (i=0; i<len; i++)
++ {
++ if (buf[i] != datatmp[i])
++ {
++ kfree(datatmp);
++ kfree(oobtmp);
++ printk("Data verify error -> page: %x, byte: %x \n",nand_page,i);
++ return i;
++ }
++ }
++ }
++ else if(len == mtd->oobsize)
++ {
++ for (i=0; i<len; i++)
++ {
++ if (buf[i] != oobtmp[i])
++ {
++ kfree(datatmp);
++ kfree(oobtmp);
++ printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i);
++ return i;
++ }
++ }
++ }
++ else
++ {
++ printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
++ kfree(datatmp);
++ kfree(oobtmp);
++ return -1;
++ }
++
++ kfree(datatmp);
++ kfree(oobtmp);
++ return 0;
++}
++
++/*
++ * Send command to NAND device
++ */
++static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
++{
++ register struct nand_chip *this = mtd->priv;
++ int opcode;
++
++
++ /*
++ * program and erase have their own busy handlers
++ * status and sequential in needs no delay
++ */
++ switch (command) {
++
++ case NAND_CMD_PAGEPROG:
++ case NAND_CMD_ERASE1:
++ case NAND_CMD_ERASE2:
++ case NAND_CMD_SEQIN:
++ case NAND_CMD_STATUS:
++ case NAND_CMD_READ0:
++
++ /*
++ * Write out the command to the device.
++ */
++ if (column != -1 || page_addr != -1) {
++
++ /* Serially input address */
++ if (column != -1)
++ //FLASH_WRITE_REG(NFLASH_ADDRESS,column);
++ nand_col=column;
++
++ opcode = FLASH_READ_REG(NFLASH_ADDRESS);
++
++ if (page_addr != -1)
++ //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
++ nand_page = page_addr;
++
++ }
++ return;
++
++ case NAND_CMD_RESET:
++ if (this->dev_ready)
++ break;
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
++
++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ while ( !(sl2312_device_ready(mtd) & 0x40));
++ {
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ //sl2312_flash_delay();
++ schedule();
++ return;
++ }
++ /* This applies to read commands */
++ default:
++ /*
++ * If we don't have access to the busy pin, we apply the given
++ * command delay
++ */
++ if (!this->dev_ready) {
++ udelay (this->chip_delay);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return;
++ }
++ }
++
++ /* wait until command is processed */
++ while (!this->dev_ready(mtd));
++
++}
++/*Add function*/
++static void nand_read_id(int chip_no, unsigned char *id)
++{
++ unsigned int opcode, i;
++
++ if(chip_no==0)
++ CHIP_EN = NFLASH_CHIP0_EN;
++ else
++ CHIP_EN = NFLASH_CHIP1_EN;
++
++ opcode = FLASH_READ_REG(NFLASH_TYPE);
++
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ if((opcode&0x00000300)<=0x00000100)
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
++ else
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
++ FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
++
++ /* read maker code */
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ opcode = FLASH_READ_REG(NFLASH_DATA);
++ if(DWIDTH==NFLASH_WiDTH16)
++ {
++ id[0] = opcode&0xff;
++ id[1] = (opcode&0xff00)>>8;
++ }
++ else
++ {
++ id[0] = opcode&0xff;
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ opcode = FLASH_READ_REG(NFLASH_DATA);
++ id[1] = (opcode&0xff00)>>8;
++
++ opcode=FLASH_READ_REG(NFLASH_TYPE);
++ if((opcode&0x300)>0x100)
++ {
++ for(i=0;i<2;i++)
++ {
++ //data cycle 3 & 4 ->not use
++ opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ opcode=FLASH_READ_REG(NFLASH_DATA);
++ id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i));
++ }
++ }
++ }
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++}
++
++/*
++ * NAND erase a block
++ */
++static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
++{
++ int page, len, status, pages_per_block, ret, chipnr;
++ struct nand_chip *this = mtd->priv;
++
++ DEBUG (MTD_DEBUG_LEVEL3,
++ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
++
++ /* Start address must align on block boundary */
++ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
++ return -EINVAL;
++ }
++
++ /* Length must align on block boundary */
++ if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
++ return -EINVAL;
++ }
++
++ /* Do not allow erase past end of device */
++ if ((instr->len + instr->addr) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
++ return -EINVAL;
++ }
++
++ instr->fail_addr = 0xffffffff;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
++
++ /* Shift to get first page */
++ page = (int) (instr->addr >> this->page_shift);
++ chipnr = (int) (instr->addr >> this->chip_shift);
++
++ /* Calculate pages in each block */
++ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
++
++ /* Select the NAND device */
++ //this->select_chip(mtd, chipnr);
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ /* Check, if it is write protected */
++ status = sl2312_device_ready(mtd);
++ if (!(status & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
++ instr->state = MTD_ERASE_FAILED;
++ goto erase_exit;
++ }
++
++ /* Loop through the pages */
++ len = instr->len;
++
++ instr->state = MTD_ERASING;
++
++ while (len) {
++ /* Check if we have a bad block, we do not erase bad blocks ! */
++ if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
++ printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
++ //instr->state = MTD_ERASE_FAILED;
++ //goto erase_exit;
++ }
++
++ /* Invalidate the page cache, if we erase the block which contains
++ the current cached page */
++ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
++ this->pagebuf = -1;
++ /////////
++
++ ///* Send commands to erase a page */
++ //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ //
++ //if(mtd->oobblock > 528)
++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
++ //else
++ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
++ //
++ //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
++ //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
++ //
++ //
++ //
++ ///* read maker code */
++ //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
++ //FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++ //
++ //while(opcode&0x80000000) //polling flash access 31b
++ //{
++ // opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ // //sl2312_flash_delay();
++ // schedule();
++ // //cond_resched();
++ //}
++ sl2312_nand_erase_block(mtd, page);
++ //////////////
++ status = this->waitfunc (mtd, this, FL_ERASING);
++ /* See if block erase succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
++ instr->state = MTD_ERASE_FAILED;
++ instr->fail_addr = (page << this->page_shift);
++ goto erase_exit;
++ }
++
++ /* Increment page address and decrement length */
++ len -= (1 << this->phys_erase_shift);
++ page += pages_per_block;
++
++ /* Check, if we cross a chip boundary */
++ if (len && !(page & this->pagemask)) {
++ chipnr++;
++ this->select_chip(mtd, 0);
++ this->select_chip(mtd, 0);
++ }
++ //sl2312_flash_delay();
++ schedule();
++ //cond_resched();
++ }
++ instr->state = MTD_ERASE_DONE;
++
++erase_exit:
++ /* De-select the NAND device */
++ this->select_chip(mtd, 0);
++ spin_unlock_bh (&this->chip_lock);
++
++ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
++ /* Do call back function */
++ if (!ret && instr->callback)
++ instr->callback (instr);
++
++ /* The device is ready */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ /* Return more or less happy */
++ return ret;
++}
++
++static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++ //struct nand_chip *this = mtd->priv;
++
++ switch(chip) {
++ case -1:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ case 0:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ case 1:
++ CHIP_EN = NFLASH_CHIP1_EN;
++ break;
++ default:
++ CHIP_EN = NFLASH_CHIP0_EN;
++ break;
++ }
++}
++
++/**
++ * nand_default_block_markbad - [DEFAULT] mark a block bad
++ * @mtd: MTD device structure
++ * @ofs: offset from device start
++ *
++ * This is the default implementation, which can be overridden by
++ * a hardware specific driver.
++*/
++static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
++{
++ struct nand_chip *this = mtd->priv;
++ u_char buf[2] = {0, 0};
++ size_t retlen;
++ int block;
++
++ /* Get block number */
++ block = ((int) ofs) >> this->bbt_erase_shift;
++ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
++
++ /* Do we have a flash based bad block table ? */
++ if (this->options & NAND_USE_FLASH_BBT)
++ return nand_update_bbt (mtd, ofs);
++
++ /* We write two bytes, so we dont have to mess with 16 bit access */
++ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
++ return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
++}
++
++/* Appropriate chip should already be selected */
++static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
++{
++ u_char *buf, *oobbuf;
++ size_t retlen;
++ unsigned long page, chipnr;
++ struct nand_chip *this = mtd->priv;
++
++ if (getchip) {
++ page = (int)(ofs >> this->page_shift);
++ chipnr = (int)(ofs >> this->chip_shift);
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
++ /* Select the NAND device */
++ this->select_chip(mtd, chipnr);
++ } else
++ page = (int) ofs;
++
++ buf = kmalloc (mtd->oobblock,GFP_KERNEL);
++ oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
++
++ if ((!buf)||(!oobbuf)) {
++ printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
++
++ }
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
++
++
++ if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
++ {
++ kfree(buf);
++ kfree(oobbuf);
++ return 1;
++ }
++
++ kfree(buf);
++ kfree(oobbuf);
++ return 0;
++}
++
++/*
++* Use NAND read ECC
++*/
++static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++ return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
++}
++
++/*
++ * NAND read with ECC
++ */
++static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
++ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
++{
++ int j, col, page, opcode, i;
++ int end=0;//, ecc=0;//, end_page=0;
++ int erase_state = 0;
++ int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
++ struct nand_chip *this = mtd->priv;
++ u_char *data_poi, *oob_data = oob_buf;
++ //u_char ecc_calc[6];
++ //u_char ecc_code[6];
++ int eccmode;
++ int *oob_config;
++
++
++
++ // use chip default if zero
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++ oob_config = oobsel->eccpos;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++ /* Do not allow reads past end of device */
++ if ((from + len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
++ *retlen = 0;
++ return -EINVAL;
++ }
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* First we calculate the starting page */
++ page = from >> this->page_shift;
++
++ //end_page = mtd->oobblock + mtd->oobsize;
++ end = mtd->oobblock;
++ //ecc = mtd->eccsize;
++ /* Get raw starting column */
++ col = (from & (mtd->oobblock - 1));
++
++
++ /* Send the read command */
++ //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
++
++ /* Loop until all data read */
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ while (read < len) {
++
++ //udelay(1200);
++ /* If we have consequent page reads, apply delay or wait for ready/busy pin */
++ if (read) {
++ if (!this->dev_ready)
++ udelay (this->chip_delay);
++ else
++ while (!this->dev_ready(mtd));
++ }
++
++ /*
++ * If the read is not page aligned, we have to read into data buffer
++ * due to ecc, else we read into return buffer direct
++ */
++ if (!col && (len - read) >= end)
++ data_poi = &buf[read];
++ else
++ data_poi = this->data_buf;
++
++ /* get oob area, if we have no oob buffer from fs-driver */
++ if (!oob_buf) {
++ oob_data = &this->data_buf[end];
++ oob = 0;
++ }
++
++ j = 0;
++ switch (eccmode) {
++ case NAND_ECC_NONE: { /* No ECC, Read in a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ break;
++ }
++
++ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
++ break;
++
++ case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
++ break;
++
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
++ //BUG();
++ }//end switch
++
++ for(i=0;i<end;i++)
++ {
++ //udelay(7);
++ data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
++ }
++ /* read oobdata */
++ for (i = 0; i < mtd->oobsize; i++)
++ {
++ //udelay(7);
++ oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
++ }
++
++ /* Skip ECC, if not active */
++ if (eccmode == NAND_ECC_NONE)
++ goto readdata;
++
++ // compare ecc and correct data
++
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ while(!(opcode&0x80000000)) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++ for(j=0;j<(end/512);j++)
++ {//for 2k page
++
++ opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
++
++ //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
++
++ FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
++ opcode = 0x00000000|(j<<8); //select ECC code generation 0
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
++
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ if((opcode&0x00000003)==0x03)
++ {
++ printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
++ ecc_failed++;
++ }
++ else if((opcode&0x00000003)==0x01)
++ {
++ printk (KERN_WARNING "\nPageRead One bit data error !!");
++ // correct data
++ if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
++ data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
++ else
++ data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
++
++ }
++ else if((opcode&0x00000003)==0x02)
++ {
++ printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
++ }
++ else if((opcode&0x00000003)==0x00)
++ {
++
++ }
++
++ }//for 2k page
++readdata:
++ if (col || (len - read) < end) {
++ for (j = col; j < end && read < len; j++)
++ buf[read++] = data_poi[j];
++ } else
++ read += mtd->oobblock;
++ /* For subsequent reads align to page boundary. */
++ col = 0;
++ /* Increment page address */
++ page++;
++ schedule();
++ }
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ /*
++ * Return success, if no ECC failures, else -EIO
++ * fs driver will take care of that, because
++ * retlen == desired len and result == -EIO
++ */
++ *retlen = read;
++ return ecc_failed ? -EIO : 0;
++}
++
++/*
++ * Wait for command done. This applies to erase and program only
++ * Erase can take up to 400ms and program up to 20ms according to
++ * general NAND and SmartMedia specs
++ *
++*/
++static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
++{
++ unsigned long timeo = jiffies;
++ int status, opcode;
++
++ if (state == FL_ERASING)
++ timeo += (HZ * 400) / 1000;
++ else
++ timeo += (HZ * 20) / 1000;
++
++ spin_lock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
++ FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
++
++ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
++
++
++ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
++ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
++
++ while(opcode&0x80000000) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ACCESS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++ while (time_before(jiffies, timeo)) {
++ /* Check, if we were interrupted */
++ if (this->state != state) {
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return 0;
++ }
++ if (this->dev_ready) {
++ if (this->dev_ready(mtd))
++ break;
++ }
++ if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
++ break;
++
++ spin_unlock_bh (&this->chip_lock);
++ yield ();
++ spin_lock_bh (&this->chip_lock);
++ }
++ status = FLASH_READ_REG(NFLASH_DATA)&0xff;
++ spin_unlock_bh (&this->chip_lock);
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++ return status;
++}
++
++static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
++{
++ int i, col, page, j=0;
++ //int erase_state = 0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++
++ databuf = &this->data_buf[0];
++ oobbuf = &this->data_buf[mtd->oobblock];
++ for (i = 0; i < mtd->oobsize; i++)
++ oobbuf[i] = 0xff;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
++
++ /* Shift to get page */
++ page = ((int) from) >> this->page_shift;
++
++ /* Mask to get column */
++ col = from & (mtd->oobsize-1); //0x0f;
++
++ /* Initialize return length value */
++ *retlen = 0;
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++ for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++)
++ buf[j] = oobbuf[i];
++
++ *retlen = j ;
++ return 0;
++}
++
++#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
++/*
++* Use NAND write ECC
++*/
++static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++ return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
++}
++
++/*
++ * NAND write with ECC
++ */
++static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
++{
++ int page, ret = 0, oob = 0, written = 0;
++ struct nand_chip *this = mtd->priv;
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++
++ /* Do not allow write past end of device */
++ if ((to + len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
++ return -EINVAL;
++ }
++
++ /* reject writes, which are not page aligned */
++ if (NOTALIGNED (to) || NOTALIGNED(len)) {
++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++ return -EINVAL;
++ }
++
++ // if oobsel is NULL, use chip defaults
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++
++ /* Loop until all data is written */
++ while (written < len) {
++ //udelay(100);
++ int cnt = mtd->oobblock;
++ this->data_poi = (u_char*) &buf[written];
++ /* We use the same function for write and writev */
++ if (eccbuf) {
++ ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
++ oob += mtd->oobsize;
++ } else
++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++
++ if (ret)
++ goto out;
++
++ /* Update written bytes count */
++ written += cnt;
++ /* Increment page address */
++ page++;
++ }
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ *retlen = written;
++ return ret;
++}
++
++/*
++ * Nand_page_program function is used for write and writev !
++ * This function will always program a full page of data
++ * If you call it with a non page aligned buffer, you're lost :)
++ */
++static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel)
++{
++ int i, j, status, opcode;
++ u_char ecc_code[16], *oob_data;
++ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
++ //int *oob_config = oobsel->eccpos;
++
++ /* pad oob area, if we have no oob buffer from fs-driver */
++ if (!oob_buf) {
++ oob_data = &this->data_buf[mtd->oobblock];
++ for (i = 0; i < mtd->oobsize; i++)
++ oob_data[i] = 0xff;
++ } else
++ oob_data = oob_buf;
++
++ /* Send command to begin auto page programming */
++
++ memset(oob_data,0xff,mtd->oobsize);
++ /* Write out complete page of data, take care of eccmode */
++ switch (eccmode) {
++ /* No ecc and software ecc 3/256, write all */
++ case NAND_ECC_NONE:
++ printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ break;
++ case NAND_ECC_SOFT:
++ break;
++
++ /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
++ case NAND_ECC_HW3_256:
++ break;
++
++ /* Hardware ecc 3 byte / 512 byte data, write full page */
++ case NAND_ECC_HW3_512:
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
++
++ /* Hardware ecc 6 byte / 512 byte data, write full page */
++ case NAND_ECC_HW6_512:
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ //BUG();
++ }
++
++ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
++
++ for(i=0;i<mtd->oobblock;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
++ }
++ ///////////////
++ if(eccmode!=NAND_ECC_NONE)
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ while(!(opcode&0x80000000)) //polling flash access 31b
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
++ //sl2312_flash_delay();
++ schedule();
++ }
++
++
++ for(i=0;i<(mtd->oobblock/512);i++)
++ {
++ opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
++
++ for(j=3;j>0;j--)
++ oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
++
++ for(j=0;j<4;j++)
++ {
++ ecc_code[15-i*4] = opcode;
++ ecc_code[15-i*4-1] = opcode>>8;
++ ecc_code[15-i*4-2] = opcode>>16;
++ }
++ }
++
++ //disable ecc
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
++
++ /* Write out OOB data */
++ for(i=0;i<mtd->oobsize;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
++ }
++ }
++ else
++ {
++ for(i=0;i<mtd->oobsize;i++)
++ {
++ //udelay(5);
++ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
++ }
++ }
++
++
++ /* call wait ready function */
++ status = this->waitfunc (mtd, this, FL_WRITING);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ /* See if device thinks it succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
++ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
++ return -EIO;
++ }
++
++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++ /*
++ * The NAND device assumes that it is always writing to
++ * a cleanly erased page. Hence, it performs its internal
++ * write verification only on bits that transitioned from
++ * 1 to 0. The device does NOT verify the whole page on a
++ * byte by byte basis. It is possible that the page was
++ * not completely erased or the page is becoming unusable
++ * due to wear. The read with ECC would catch the error
++ * later when the ECC page check fails, but we would rather
++ * catch it early in the page write stage. Better to write
++ * no data than invalid data.
++ */
++
++ /* Send command to read back the page */
++ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
++ /* Loop through and verify the data */
++ if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++ return -EIO;
++ }
++
++ /* check, if we have a fs-supplied oob-buffer */
++ if (oob_buf) {
++ if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
++ return -EIO;
++ }
++ } else {
++ if (eccmode != NAND_ECC_NONE) {
++ int ecc_bytes = 0;
++
++ switch (this->eccmode) {
++ case NAND_ECC_SOFT:
++ case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
++ case NAND_ECC_HW3_512: ecc_bytes = 3; break;
++ case NAND_ECC_HW6_512: ecc_bytes = 6; break;
++ }
++
++
++
++ for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
++ {
++ if(i>=mtd->oobblock)
++ oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++ else
++ oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
++ }
++
++ if(this->eccmode == NAND_ECC_HW3_512)
++ {
++ for(i=0;i<(mtd->oobblock/512);i++)
++ {
++ for(j=0;j<3;j++)
++ {
++ if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
++ DEBUG (MTD_DEBUG_LEVEL0,
++ "%s: Failed ECC write "
++ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
++ return -EIO;
++ }
++ }
++ }
++ }
++ }//eccmode != NAND_ECC_NONE
++ }
++ /*
++ * Terminate the read command. This is faster than sending a reset command or
++ * applying a 20us delay before issuing the next programm sequence.
++ * This is not a problem for all chips, but I have found a bunch of them.
++ */
++ //this->select_chip(mtd, -1);
++ //this->select_chip(mtd, 0);
++#endif
++
++ return 0;
++}
++
++/*
++ * NAND write with iovec
++ */
++static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++ loff_t to, size_t * retlen)
++{
++ return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
++}
++
++static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
++ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
++{
++ int i, page, len, total_len, ret = 0, written = 0;
++ struct nand_chip *this = mtd->priv;
++
++ /* Calculate total length of data */
++ total_len = 0;
++ for (i = 0; i < count; i++)
++ total_len += (int) vecs[i].iov_len;
++
++ DEBUG (MTD_DEBUG_LEVEL3,
++ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
++
++ /* Do not allow write past end of page */
++ if ((to + total_len) > mtd->size) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
++ return -EINVAL;
++ }
++
++ /* reject writes, which are not page aligned */
++ if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
++ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
++ return -EINVAL;
++ }
++
++ // if oobsel is NULL, use chip defaults
++ if (oobsel == NULL)
++ oobsel = &mtd->oobinfo;
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++
++ /* Loop until all iovecs' data has been written */
++ len = 0;
++ while (count) {
++ /*
++ * Check, if the tuple gives us not enough data for a
++ * full page write. Then we can use the iov direct,
++ * else we have to copy into data_buf.
++ */
++ if ((vecs->iov_len - len) >= mtd->oobblock) {
++ this->data_poi = (u_char *) vecs->iov_base;
++ this->data_poi += len;
++ len += mtd->oobblock;
++ /* Check, if we have to switch to the next tuple */
++ if (len >= (int) vecs->iov_len) {
++ vecs++;
++ len = 0;
++ count--;
++ }
++ } else {
++ /*
++ * Read data out of each tuple until we have a full page
++ * to write or we've read all the tuples.
++ */
++ int cnt = 0;
++ while ((cnt < mtd->oobblock) && count) {
++ if (vecs->iov_base != NULL && vecs->iov_len) {
++ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
++ }
++ /* Check, if we have to switch to the next tuple */
++ if (len >= (int) vecs->iov_len) {
++ vecs++;
++ len = 0;
++ count--;
++ }
++ }
++ this->data_poi = this->data_buf;
++ }
++
++ /* We use the same function for write and writev !) */
++ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
++ if (ret)
++ goto out;
++
++ /* Update written bytes count */
++ written += mtd->oobblock;;
++
++ /* Increment page address */
++ page++;
++ }
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ *retlen = written;
++ return ret;
++}
++
++/*
++static u_char ffchars[] = {
++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
++};
++*/
++/*
++ * NAND write out-of-band
++ */
++static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
++{
++ int column, page, status, ret = 0, j=0;
++ struct nand_chip *this = mtd->priv;
++ u_char *databuf, *oobbuf;
++
++
++ databuf = &this->data_buf[0];
++ oobbuf = &this->data_buf[mtd->oobblock];
++ for (j = 0; j < mtd->oobsize; j++)
++ oobbuf[j] = 0xff;
++//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
++// int i;
++//#endif
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
++
++ /* Shift to get page */
++ page = ((int) to) >> this->page_shift;
++
++ /* Mask to get column */
++ column = to & 0x1f;
++
++ /* Initialize return length value */
++ *retlen = 0;
++
++ /* Do not allow write past end of page */
++ if ((column + len) > mtd->oobsize) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
++ return -EINVAL;
++ }
++
++ /* Grab the lock and see if the device is available */
++ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
++
++ /* Select the NAND device */
++ this->select_chip(mtd, 0);
++
++ /* Reset the chip. Some chips (like the Toshiba TC5832DC found
++ in one of my DiskOnChip 2000 test units) will clear the whole
++ data page too if we don't do this. I have no clue why, but
++ I seem to have 'fixed' it in the doc2000 driver in
++ August 1999. dwmw2. */
++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++
++ /* Check the WP bit */
++ if (!(sl2312_device_ready(mtd) & 0x80)) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
++ ret = -EIO;
++ goto out;
++ }
++ /* Write out desired data */
++ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
++
++ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
++
++ for(j=column;j<(column+len);j++)
++ oobbuf[j] = buf[j-column];
++ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
++
++ status = this->waitfunc (mtd, this, FL_WRITING);
++
++ /* See if device thinks it succeeded */
++ if (status & 0x01) {
++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
++ ret = -EIO;
++ goto out;
++ }
++ /* Return happy */
++ *retlen = len;
++
++
++out:
++ /* De-select the NAND device */
++ //this->select_chip(mtd, -1);
++
++ /* Wake up anyone waiting on the device */
++ spin_lock_bh (&this->chip_lock);
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ spin_unlock_bh (&this->chip_lock);
++
++ return ret;
++}
++
++/*
++ * NAND sync
++ */
++static void sl2312_nand_sync (struct mtd_info *mtd)
++{
++ struct nand_chip *this = mtd->priv;
++ DECLARE_WAITQUEUE (wait, current);
++
++ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
++
++retry:
++ /* Grab the spinlock */
++ spin_lock_bh (&this->chip_lock);
++
++ /* See what's going on */
++ switch (this->state) {
++ case FL_READY:
++ case FL_SYNCING:
++ this->state = FL_SYNCING;
++ spin_unlock_bh (&this->chip_lock);
++ break;
++
++ default:
++ /* Not an idle state */
++ add_wait_queue (&this->wq, &wait);
++ spin_unlock_bh (&this->chip_lock);
++ schedule ();
++
++ remove_wait_queue (&this->wq, &wait);
++ goto retry;
++ }
++
++ /* Lock the device */
++ spin_lock_bh (&this->chip_lock);
++
++ /* Set the device to be ready again */
++ if (this->state == FL_SYNCING) {
++ this->state = FL_READY;
++ wake_up (&this->wq);
++ }
++
++ /* Unlock the device */
++ spin_unlock_bh (&this->chip_lock);
++}
++
++
++/*
++ * Scan for the NAND device
++ */
++int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
++{
++ int i, j, nand_maf_id, nand_dev_id, busw;
++ struct nand_chip *this = mtd->priv;
++ unsigned char id[4];
++
++ /* Get buswidth to select the correct functions*/
++ busw = this->options & NAND_BUSWIDTH_16;
++
++ /* check for proper chip_delay setup, set 20us if not */
++ if (!this->chip_delay)
++ this->chip_delay = 20;
++
++ /* check, if a user supplied command function given */
++ if (this->cmdfunc == NULL)
++ this->cmdfunc = sl2312_nand_command;
++
++ /* check, if a user supplied wait function given */
++ if (this->waitfunc == NULL)
++ this->waitfunc = sl2312_nand_waitfunc;
++
++ if (!this->select_chip)
++ this->select_chip = sl2312_nand_select_chip;
++ if (!this->write_byte)
++ this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
++ if (!this->read_byte)
++ this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
++// if (!this->write_word)
++// this->write_word = nand_write_word;
++// if (!this->read_word)
++// this->read_word = nand_read_word;
++// if (!this->block_bad)
++ this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
++ if (!this->block_markbad)
++ this->block_markbad = sl2312_nand_default_block_markbad;
++ if (!this->write_buf)
++ this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
++ if (!this->read_buf)
++ this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
++ if (!this->verify_buf)
++ this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
++ if (!this->scan_bbt)
++ this->scan_bbt = sl2312_nand_scan_bbt;
++
++ /* Select the device */
++ this->select_chip(mtd, 0);
++
++ /* Read manufacturer and device IDs */
++ nand_read_id(0,id);
++
++ nand_maf_id = id[0];
++ nand_dev_id = id[1];
++
++ /* Print and store flash device information */
++ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
++
++ if (nand_dev_id != nand_flash_ids[i].id)
++ continue;
++
++ if (!mtd->name) mtd->name = nand_flash_ids[i].name;
++ this->chipsize = nand_flash_ids[i].chipsize << 20;
++
++ /* New devices have all the information in additional id bytes */
++ if (!nand_flash_ids[i].pagesize) {
++ int extid;
++
++ /* The 4th id byte is the important one */
++ extid = id[3];
++ /* Calc pagesize */
++ mtd->oobblock = 1024 << (extid & 0x3);
++ extid >>= 2;
++ /* Calc oobsize */
++ mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
++ extid >>= 2;
++ /* Calc blocksize. Blocksize is multiples of 64KiB */
++ mtd->erasesize = (64 * 1024) << (extid & 0x03);
++ extid >>= 2;
++ /* Get buswidth information */
++ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
++
++ } else {
++ /* Old devices have this data hardcoded in the
++ * device id table */
++ mtd->erasesize = nand_flash_ids[i].erasesize;
++ mtd->oobblock = nand_flash_ids[i].pagesize;
++ mtd->oobsize = mtd->oobblock / 32;
++ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
++ }
++
++ /* Check, if buswidth is correct. Hardware drivers should set
++ * this correct ! */
++ if (busw != (this->options & NAND_BUSWIDTH_16)) {
++ printk (KERN_INFO "NAND device: Manufacturer ID:"
++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++ nand_manuf_ids[i].name , mtd->name);
++ printk (KERN_WARNING
++ "NAND bus width %d instead %d bit\n",
++ (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
++ busw ? 16 : 8);
++ this->select_chip(mtd, -1);
++ return 1;
++ }
++
++ /* Calculate the address shift from the page size */
++ this->page_shift = ffs(mtd->oobblock) - 1;
++ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
++ this->chip_shift = ffs(this->chipsize) - 1;
++
++ /* Set the bad block position */
++ this->badblockpos = mtd->oobblock > 512 ?
++ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
++
++ /* Get chip options, preserve non chip based options */
++ this->options &= ~NAND_CHIPOPTIONS_MSK;
++ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
++ /* Set this as a default. Board drivers can override it, if neccecary */
++ this->options |= NAND_NO_AUTOINCR;
++ /* Check if this is a not a samsung device. Do not clear the options
++ * for chips which are not having an extended id.
++ */
++ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
++ this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
++
++ /* Check for AND chips with 4 page planes */
++ // if (this->options & NAND_4PAGE_ARRAY)
++ // this->erase_cmd = multi_erase_cmd;
++ // else
++ // this->erase_cmd = single_erase_cmd;
++
++ /* Do not replace user supplied command function ! */
++ // if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
++ // this->cmdfunc = nand_command_lp;
++
++ /* Try to identify manufacturer */
++ for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
++ if (nand_manuf_ids[j].id == nand_maf_id)
++ break;
++ }
++ printk (KERN_INFO "NAND device: Manufacturer ID:"
++ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
++ nand_manuf_ids[j].name , nand_flash_ids[i].name);
++ break;
++ }
++ /////////////////////////////
++
++ for (i=1; i < maxchips; i++) {
++ this->select_chip(mtd, i);
++
++ /* Send the command for reading device ID */
++ nand_read_id(1,id);
++
++ /* Read manufacturer and device IDs */
++ if (nand_maf_id != id[0] ||
++ nand_dev_id != id[1])
++ break;
++ }
++ if (i > 1)
++ printk(KERN_INFO "%d NAND chips detected\n", i);
++
++ /* Allocate buffers, if neccecary */
++ if (!this->oob_buf) {
++ size_t len;
++ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
++ this->oob_buf = kmalloc (len, GFP_KERNEL);
++ if (!this->oob_buf) {
++ printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
++ return -ENOMEM;
++ }
++ this->options |= NAND_OOBBUF_ALLOC;
++ }
++
++ if (!this->data_buf) {
++ size_t len;
++ len = mtd->oobblock + mtd->oobsize;
++ this->data_buf = kmalloc (len, GFP_KERNEL);
++ if (!this->data_buf) {
++ if (this->options & NAND_OOBBUF_ALLOC)
++ kfree (this->oob_buf);
++ printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
++ return -ENOMEM;
++ }
++ this->options |= NAND_DATABUF_ALLOC;
++ }
++
++ /* Store the number of chips and calc total size for mtd */
++ this->numchips = i;
++ mtd->size = i * this->chipsize;
++ /* Convert chipsize to number of pages per chip -1. */
++ this->pagemask = (this->chipsize >> this->page_shift) - 1;
++ /* Preset the internal oob buffer */
++ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
++
++ /* If no default placement scheme is given, select an
++ * appropriate one */
++ if (!this->autooob) {
++ /* Select the appropriate default oob placement scheme for
++ * placement agnostic filesystems */
++ switch (mtd->oobsize) {
++ case 8:
++ this->autooob = &nand_oob_8;
++ break;
++ case 16:
++ this->autooob = &nand_oob_16;
++ break;
++ case 64:
++ this->autooob = &nand_oob_64;
++ break;
++ default:
++ printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
++ mtd->oobsize);
++ BUG();
++ }
++ }
++
++ /* The number of bytes available for the filesystem to place fs dependend
++ * oob data */
++ if (this->options & NAND_BUSWIDTH_16) {
++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
++ if (this->autooob->eccbytes & 0x01)
++ mtd->oobavail--;
++ } else
++ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
++
++
++ /*
++ * check ECC mode, default to software
++ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
++ * fallback to software ECC
++ */
++ this->eccsize = 256; /* set default eccsize */
++ this->eccbytes = 3;
++
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ if (mtd->oobblock < 2048) {
++ printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
++ mtd->oobblock);
++ this->eccmode = NAND_ECC_SOFT;
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ } else
++ this->eccsize = 2048;
++ break;
++
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512:
++ case NAND_ECC_HW8_512:
++ if (mtd->oobblock == 256) {
++ printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
++ this->eccmode = NAND_ECC_SOFT;
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ } else
++ this->eccsize = 512; /* set eccsize to 512 */
++ break;
++
++ case NAND_ECC_HW3_256:
++ break;
++
++ case NAND_ECC_NONE:
++ printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
++ this->eccmode = NAND_ECC_NONE;
++ break;
++
++ case NAND_ECC_SOFT:
++ this->calculate_ecc = nand_calculate_ecc;
++ this->correct_data = nand_correct_data;
++ break;
++
++ default:
++ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
++ BUG();
++ }
++
++ /* Check hardware ecc function availability and adjust number of ecc bytes per
++ * calculation step
++ */
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ this->eccbytes += 4;
++ case NAND_ECC_HW8_512:
++ this->eccbytes += 2;
++ case NAND_ECC_HW6_512:
++ this->eccbytes += 3;
++// case NAND_ECC_HW3_512:
++ case NAND_ECC_HW3_256:
++ if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
++ break;
++ printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
++ BUG();
++ }
++
++ mtd->eccsize = this->eccsize;
++
++ /* Set the number of read / write steps for one page to ensure ECC generation */
++ switch (this->eccmode) {
++ case NAND_ECC_HW12_2048:
++ this->eccsteps = mtd->oobblock / 2048;
++ break;
++ case NAND_ECC_HW3_512:
++ case NAND_ECC_HW6_512:
++ case NAND_ECC_HW8_512:
++ this->eccsteps = mtd->oobblock / 512;
++ break;
++ case NAND_ECC_HW3_256:
++ case NAND_ECC_SOFT:
++ this->eccsteps = mtd->oobblock / 256;
++ break;
++
++ case NAND_ECC_NONE:
++ this->eccsteps = 1;
++ break;
++ }
++
++ /* Initialize state, waitqueue and spinlock */
++ this->state = FL_READY;
++ init_waitqueue_head (&this->wq);
++ spin_lock_init (&this->chip_lock);
++
++ /* De-select the device */
++ this->select_chip(mtd, 0);
++
++ /* Print warning message for no device */
++ if (!mtd->size) {
++ printk (KERN_WARNING "No NAND device found!!!\n");
++ return 1;
++ }
++
++ /* Fill in remaining MTD driver data */
++ mtd->type = MTD_NANDFLASH;
++ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
++ mtd->ecctype = MTD_ECC_SW;
++ mtd->erase = sl2312_nand_erase;
++ mtd->point = NULL;
++ mtd->unpoint = NULL;
++ mtd->read = sl2312_nand_read;
++ mtd->write = sl2312_nand_write;
++ mtd->read_ecc = sl2312_nand_read_ecc;
++ mtd->write_ecc = sl2312_nand_write_ecc;
++ mtd->read_oob = sl2312_nand_read_oob;
++ mtd->write_oob = sl2312_nand_write_oob;
++ mtd->readv = NULL;
++ mtd->writev = sl2312_nand_writev;
++ mtd->writev_ecc = sl2312_nand_writev_ecc;
++ mtd->sync = sl2312_nand_sync;
++ mtd->lock = NULL;
++ mtd->unlock = NULL;
++ mtd->suspend = NULL;
++ mtd->resume = NULL;
++ mtd->block_isbad = sl2312_nand_block_isbad;
++ mtd->block_markbad = sl2312_nand_block_markbad;
++
++ /* and make the autooob the default one */
++ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
++
++ mtd->owner = THIS_MODULE;
++
++ /* Build bad block table */
++ return this->scan_bbt (mtd);
++}
++
++/*End Add function*/
++
++/*
++ * Main initialization routine
++ */
++extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
++
++int __init sl2312_mtd_init (void)
++{
++ struct nand_chip *this;
++ int err = 0;
++ struct mtd_partition *parts;
++ int nr_parts = 0;
++ int ret, data, *base;
++
++ printk("NAND MTD Driver Start Init ......\n");
++
++ base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
++ data = *base;
++ data&=0xffffffeb;
++ data|=0x3; //disable p & s flash
++ *base = data;
++
++ /* Allocate memory for MTD device structure and private data */
++ sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
++ if (!sl2312_mtd) {
++ printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
++ err = -ENOMEM;
++ goto out;
++ }
++
++ // sl2312_device_setup();
++
++ /* io is indirect via a register so don't need to ioremap address */
++
++ /* Get pointer to private data */
++ this = (struct nand_chip *) (&sl2312_mtd[1]);
++
++ /* Initialize structures */
++ memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
++ memset((char *) this, 0, sizeof(struct nand_chip));
++
++ /* Link the private data with the MTD structure */
++ sl2312_mtd->priv = this;
++ sl2312_mtd->name = "sl2312-nand";
++
++ /* Set address of NAND IO lines */
++ this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++ this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
++ this->read_byte = sl2312_nand_read_byte;
++ this->write_byte = sl2312_nand_write_byte;
++ this->write_buf = sl2312_nand_write_buf;
++ this->read_buf = sl2312_nand_read_buf;
++ this->verify_buf = sl2312_nand_verify_buf;
++ this->select_chip = sl2312_nand_select_chip;
++ this->block_bad = sl2312_nand_block_bad;
++ this->hwcontrol = sl2312_hwcontrol;
++ this->dev_ready = sl2312_device_ready;
++ this->cmdfunc = sl2312_nand_command;
++ this->waitfunc = sl2312_nand_waitfunc;
++ //this->calculate_ecc = sl2312_readecc;
++ this->enable_hwecc = sl2312_enable_hwecc;
++ this->eccmode = NAND_ECC_HW3_512;
++ /*this->eccsize = 512; */
++ /* 20 us command delay time */
++ this->chip_delay = 20;
++
++ this->correct_data = nand_correct_data;
++// this->scan_bbt = sl2312_nand_scan_bbt;
++
++ /* Allocate memory for internal data buffer */
++ this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
++ if (!this->data_buf) {
++ printk ("Unable to allocate NAND data buffer.\n");
++ err = -ENOMEM;
++ goto out_ior;
++ }
++
++ /* Scan to find existance of the device */
++ if (sl2312_nand_scan(sl2312_mtd, 1)) {
++ err = -ENXIO;
++ goto out_ior;
++ }
++
++ /* Register the partitions */
++ parts = sl2312_partitions;
++ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
++
++ ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
++ /*If we got an error, free all resources.*/
++ if (ret < 0) {
++ del_mtd_partitions(sl2312_mtd);
++ map_destroy(sl2312_mtd);
++ }
++ goto out;
++
++//out_buf:
++// kfree (this->data_buf);
++out_ior:
++out:
++ printk("NAND MTD Driver Init Success ......\n");
++ return err;
++}
++
++module_init(sl2312_mtd_init);
++
++/*
++ * Clean up routine
++ */
++#ifdef MODULE
++static void __exit sl2312_cleanup (void)
++{
++ struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
++
++ /* Unregister partitions */
++ del_mtd_partitions(sl2312_mtd);
++
++ /* Unregister the device */
++ del_mtd_device (sl2312_mtd);
++
++ /* Free internal data buffers */
++ kfree (this->data_buf);
++
++ /* Free the MTD device structure */
++ kfree (sl2312_mtd);
++}
++module_exit(sl2312_cleanup);
++#endif
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
++MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
+Index: linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/mtd/nand/sl2312-flash-nand.h 2008-03-15 17:04:25.878696749 +0200
+@@ -0,0 +1,24 @@
++#ifndef SL2312_FLASH_NAND_H
++#define SL2312_FLASH_NAND_H
++
++#include <linux/wait.h>
++#include <linux/spinlock.h>
++
++/*Add function*/
++static void nand_read_id(int chip_no,unsigned char *id);
++
++
++
++#define NFLASH_WiDTH8 0x00000000
++#define NFLASH_WiDTH16 0x00000400
++#define NFLASH_WiDTH32 0x00000800
++#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0
++#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1
++#define NFLASH_DIRECT 0x00004000
++#define NFLASH_INDIRECT 0x00000000
++
++
++#define DWIDTH NFLASH_WiDTH8
++
++
++#endif /* SL2312_FLASH_NAND_H */
+Index: linux-2.6.23.16/include/linux/mtd/kvctl.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/mtd/kvctl.h 2008-03-15 17:03:17.874821522 +0200
+@@ -0,0 +1,40 @@
++#ifndef KVCTL_H
++#define KVCTL_H
++
++#define VCTL_HEAD_SIZE 8
++#define VCTL_ENTRY_LEN 20
++
++typedef struct
++{
++ char header[4];
++ unsigned int entry_num;
++} vctl_mheader;
++
++typedef struct
++{
++ char header[4];
++ unsigned int size;
++ unsigned int type;
++ char majorver[4];
++ char minorver[4];
++ unsigned char *payload;
++} vctl_entry;
++
++typedef struct
++{
++ unsigned char mac[6];
++ unsigned char vlanid;
++ unsigned char vlanmap;
++} vlaninfo;
++
++#define VCT_VENDORSPEC 0
++#define VCT_BOOTLOADER 1
++#define VCT_KERNEL 2
++#define VCT_VERCTL 3
++#define VCT_CURRCONF 4
++#define VCT_DEFAULTCONF 5
++#define VCT_ROOTFS 6
++#define VCT_APP 7
++#define VCT_VLAN 8
++
++#endif
+Index: linux-2.6.23.16/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/mtd/maps/Makefile 2008-03-15 17:03:14.374622039 +0200
++++ linux-2.6.23.16/drivers/mtd/maps/Makefile 2008-03-15 17:03:17.874821522 +0200
+@@ -71,3 +71,7 @@
+ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+ obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
++###### for Storlink Soc #######
++obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
++obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
diff --git a/target/linux/storm/patches/1021-serial.patch b/target/linux/storm/patches/1021-serial.patch
new file mode 100644
index 0000000000..90880d6467
--- /dev/null
+++ b/target/linux/storm/patches/1021-serial.patch
@@ -0,0 +1,2825 @@
+Index: linux-2.6.23.16/drivers/serial/it8712.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/serial/it8712.c 2008-03-15 17:59:53.568330991 +0200
+@@ -0,0 +1,858 @@
++/*
++ * linux/drivers/char/serial_uart00.c
++ *
++ * Driver for UART00 serial ports
++ *
++ * Based on drivers/char/serial_amba.c, by ARM Limited &
++ * Deep Blue Solutions Ltd.
++ * Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $
++ *
++ */
++#include <linux/module.h>
++#include <linux/tty.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/serial.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++#include <asm/hardware.h>
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++#include <asm/bitops.h>
++#include <asm/sizes.h>
++
++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/serial_core.h>
++#include <asm/arch/sl2312.h>
++#include <asm/arch/int_ctrl.h>
++#include <asm/arch/it8712.h>
++#include "it8712.h"
++
++//#define DEBUG 1
++#define UART_NR 1
++
++#define SERIAL_IT8712_NAME "ttySI"
++#define SERIAL_IT8712_MAJOR 204
++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */
++#define SERIAL_IT8712_NR UART_NR
++#define UART_PORT_SIZE 0x50
++#define LPC_HOST_CONTINUE_MODE 0x00000040
++
++#define IT8712_NO_PORTS UART_NR
++#define IT8712_ISR_PASS_LIMIT 256
++
++#define LPC_BUS_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
++#define LPC_BUS_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
++#define LPC_SERIAL_IRQ_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8))
++#define LPC_SERIAL_IRQ_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c))
++#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10))
++#define LPC_SERIAL_IRQ_POLARITY *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14))
++#define LPC_SERIAL_IRQ_ENABLE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18))
++
++
++
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification
++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable
++#define UART_GET_IER(p) inb(((p)->membase+UART_IER))
++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding
++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer
++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status
++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status
++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control
++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR))
++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control
++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR))
++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control
++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM))
++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM))
++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL))
++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL))
++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
++#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
++
++static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
++{
++ unsigned int reg;
++
++ //printk("it8712 stop tx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_THRI);
++ UART_PUT_IER(port, reg);
++}
++
++static void it8712_stop_rx(struct uart_port *port)
++{
++ unsigned int reg;
++
++ //printk("it8712 stop rx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_RDI);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_enable_ms(struct uart_port *port)
++{
++ unsigned int reg;
++
++ //printk("it8712 enable ms : \n");
++
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_MSI);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs)
++{
++ struct tty_struct *tty = port->info->tty;
++ unsigned int status, mask, ch, flg, ignored = 0;
++
++ // printk("it8712_rx_chars : \n");
++ status = UART_GET_LSR(port);
++ while (UART_RX_DATA(status)) {
++
++ /*
++ * We need to read rds before reading the
++ * character from the fifo
++ */
++ ch = UART_GET_CHAR(port);
++ port->icount.rx++;
++
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ goto ignore_char;
++
++ flg = TTY_NORMAL;
++
++ /*
++ * Note that the error handling code is
++ * out of the main execution path
++ */
++
++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++ goto handle_error;
++ if (uart_handle_sysrq_char(port, ch, regs))
++ goto ignore_char;
++
++ error_return:
++ *tty->flip.flag_buf_ptr++ = flg;
++ *tty->flip.char_buf_ptr++ = ch;
++ tty->flip.count++;
++ ignore_char:
++ status = UART_GET_LSR(port);
++ } // end of while
++out:
++ tty_flip_buffer_push(tty);
++ return;
++
++handle_error:
++ if (status & UART_LSR_BI) {
++ status &= ~(UART_LSR_FE);
++ port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++ if (uart_handle_break(port))
++ goto ignore_char;
++#endif
++ } else if (status & UART_LSR_PE)
++ port->icount.parity++;
++ else if (status & UART_LSR_FE)
++ port->icount.frame++;
++
++ if (status & UART_LSR_OE)
++ port->icount.overrun++;
++
++ if (status & port->ignore_status_mask) {
++ if (++ignored > 100)
++ goto out;
++ goto ignore_char;
++ }
++
++ mask = status & port->read_status_mask;
++
++ if (mask & UART_LSR_BI)
++ flg = TTY_BREAK;
++ else if (mask & UART_LSR_PE)
++ flg = TTY_PARITY;
++ else if (mask & UART_LSR_FE)
++ flg = TTY_FRAME;
++
++ if (status & UART_LSR_OE) {
++ /*
++ * CHECK: does overrun affect the current character?
++ * ASSUMPTION: it does not.
++ */
++ *tty->flip.flag_buf_ptr++ = flg;
++ *tty->flip.char_buf_ptr++ = ch;
++ tty->flip.count++;
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ goto ignore_char;
++ ch = 0;
++ flg = TTY_OVERRUN;
++ }
++#ifdef SUPPORT_SYSRQ
++ port->sysrq = 0;
++#endif
++ goto error_return;
++}
++
++static void it8712_tx_chars(struct uart_port *port)
++{
++ struct circ_buf *xmit = &port->info->xmit;
++ int count;
++
++ if (port->x_char) {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, port->x_char);
++ port->icount.tx++;
++ port->x_char = 0;
++
++ return;
++ }
++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
++ it8712_stop_tx(port, 0);
++ return;
++ }
++
++ count = port->fifosize >> 1;
++ do {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (uart_circ_empty(xmit))
++ break;
++ } while (--count > 0);
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++
++ if (uart_circ_empty(xmit))
++ it8712_stop_tx(port, 0);
++}
++
++static void it8712_start_tx(struct uart_port *port, unsigned int tty_start)
++{
++ unsigned int reg;
++
++ //printk("it8712 start tx : \n");
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_THRI);
++ UART_PUT_IER(port, reg);
++ it8712_tx_chars(port);
++}
++
++static void it8712_modem_status(struct uart_port *port)
++{
++ unsigned int status;
++
++// printk("it8712 modem status : \n");
++
++ status = UART_GET_MSR(port);
++
++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++ UART_MSR_TERI | UART_MSR_DDCD)))
++ return;
++
++ if (status & UART_MSR_DDCD)
++ uart_handle_dcd_change(port, status & UART_MSR_DCD);
++
++ if (status & UART_MSR_DDSR)
++ port->icount.dsr++;
++
++ if (status & UART_MSR_DCTS)
++ uart_handle_cts_change(port, status & UART_MSR_CTS);
++
++ wake_up_interruptible(&port->info->delta_msr_wait);
++
++}
++
++static irqreturn_t it8712_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct uart_port *port = dev_id;
++ unsigned int status, pass_counter = 0, data;
++
++
++ data = LPC_SERIAL_IRQ_STATUS;
++ if((data&0x10)==0x10)
++ {
++ status = UART_GET_INT_STATUS(port);
++ do {
++// printk("it8712_int: status %x \n", status);
++ switch(status)
++ {
++ case UART_IIR_RDI:
++ case UART_IIR_RLSI:
++ case UART_IIR_RCTO:
++ it8712_rx_chars(port, regs);
++ break;
++ case UART_IIR_THRI:
++ it8712_tx_chars(port);
++ break;
++ case UART_IIR_MSI:
++ it8712_modem_status(port);
++ break;
++ default:
++ break;
++ }
++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
++ break;
++
++ status = UART_GET_INT_STATUS(port);
++ } while (status);
++ }
++
++ status = 0;
++ status |= (IRQ_LPC_MASK);
++ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status;
++
++ //cnt=0;
++ //do{
++ // data = LPC_SERIAL_IRQ_STATUS;
++ LPC_SERIAL_IRQ_STATUS = data;
++ // cnt++;
++ //}while(data);
++ //if(cnt>2)
++ // printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt);
++ return IRQ_HANDLED;
++}
++
++static u_int it8712_tx_empty(struct uart_port *port)
++{
++// printk("it8712 tx empty : \n");
++
++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
++}
++
++static u_int it8712_get_mctrl(struct uart_port *port)
++{
++ unsigned int result = 0;
++ unsigned int status;
++
++// printk("it8712 get mctrl : \n");
++
++ status = UART_GET_MSR(port);
++ if (status & UART_MSR_DCD)
++ result |= TIOCM_CAR;
++ if (status & UART_MSR_DSR)
++ result |= TIOCM_DSR;
++ if (status & UART_MSR_CTS)
++ result |= TIOCM_CTS;
++ if (status & UART_MSR_RI)
++ result |= TIOCM_RI;
++
++ return result;
++}
++
++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void it8712_break_ctl(struct uart_port *port, int break_state)
++{
++ unsigned int lcr;
++
++// printk("it8712 break ctl : \n");
++
++ lcr = UART_GET_LCR(port);
++ if (break_state == -1)
++ lcr |= UART_LCR_SBC;
++ else
++ lcr &= ~UART_LCR_SBC;
++ UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
++{
++ u_int quot;
++
++ /* Special case: B0 rate */
++ if (!baud)
++ baud = 9600;
++
++ quot = (port->uartclk/(16 * baud)) ;
++
++ return quot;
++}
++static void it8712_set_termios(struct uart_port *port, struct termios *termios,
++ struct termios *old)
++{
++ unsigned int uart_mc, old_ier, baud, quot;
++ unsigned long flags;
++
++ termios->c_cflag |= CREAD;
++ termios->c_cflag |= CLOCAL;
++#ifdef DEBUG
++ printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++ quot = uart_get_divisor(port, baud);
++
++ /* byte size and parity */
++ switch (termios->c_cflag & CSIZE) {
++ case CS5:
++ uart_mc = UART_LCR_WLEN5;
++ break;
++ case CS6:
++ uart_mc = UART_LCR_WLEN6;
++ break;
++ case CS7:
++ uart_mc = UART_LCR_WLEN7;
++ break;
++ default: // CS8
++ uart_mc = UART_LCR_WLEN8;
++ break;
++ }
++
++ if (termios->c_cflag & CSTOPB)
++ uart_mc|= UART_LCR_STOP;
++ if (termios->c_cflag & PARENB) {
++ uart_mc |= UART_LCR_EVEN;
++ if (!(termios->c_cflag & PARODD))
++ uart_mc |= UART_LCR_ODD;
++ }
++
++ spin_lock_irqsave(&port->lock, flags);
++ /*
++ * Update the per-port timeout
++ */
++ uart_update_timeout(port, termios->c_cflag, baud);
++ port->read_status_mask = UART_LSR_OE;
++ if (termios->c_iflag & INPCK)
++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & (BRKINT | PARMRK))
++ port->read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characters to ignore
++ */
++ port->ignore_status_mask = 0;
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & IGNBRK) {
++ port->ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns to (for real raw support).
++ */
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_OE;
++ }
++
++ old_ier = UART_GET_IER(port);
++
++ if(UART_ENABLE_MS(port, termios->c_cflag))
++ old_ier |= UART_IER_MSI;
++
++ /* Set baud rate */
++ quot = quot / 13;
++ UART_PUT_LCR(port, UART_LCR_DLAB);
++ UART_PUT_DIV_LO(port, (quot & 0xff));
++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++ UART_PUT_LCR(port, uart_mc);
++// UART_PUT_LCR(port, 0x07); // ???? it is wired
++ UART_PUT_MCR(port, 0x08);
++ UART_PUT_FCR(port, 0x01);
++ UART_PUT_IER(port, 0x07);
++
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++static int it8712_startup(struct uart_port *port)
++{
++ int retval, i;
++ unsigned int regs;
++
++ //printk("it8712 startup : \n");
++
++ /*
++ * Use iobase to store a pointer to info. We need this to start a
++ * transmission as the tranmittr interrupt is only generated on
++ * the transition to the idle state
++ */
++
++ // regs = 0;
++ // regs |= (IRQ_LPC_MASK);
++ // *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++
++ /*
++ * Allocate the IRQ
++ */
++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port);
++ if (retval)
++ return retval;
++
++ //printk("Init LPC int...........\n");
++ /* setup interrupt controller */
++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs &= ~(IRQ_LPC_MASK);
++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs &= ~(IRQ_LPC_MASK);
++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK);
++
++ LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02;
++ LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;//
++ LPC_SERIAL_IRQ_ENABLE = 0x10;
++
++ LPC_BUS_CTRL = 0xc0;
++ LPC_SERIAL_IRQ_CTRL = 0xc0;
++ for(i=0;i<1000;i++) ;
++ LPC_SERIAL_IRQ_CTRL = 0x80;
++ /*
++ * Finally, enable interrupts. Use the TII interrupt to minimise
++ * the number of interrupts generated. If higher performance is
++ * needed, consider using the TI interrupt with a suitable FIFO
++ * threshold
++ */
++ //UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle
++
++ return 0;
++}
++
++static void it8712_shutdown(struct uart_port *port)
++{
++ //printk("it8712 shutdown : \n");
++
++ /*
++ * disable all interrupts, disable the port
++ */
++ UART_PUT_IER(port, 0x0);
++
++ /* disable break condition and fifos */
++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++ /*
++ * Free the interrupt
++ */
++ free_irq(port->irq, port);
++}
++
++static const char *it8712_type(struct uart_port *port)
++{
++ return port->type == PORT_IT8712 ? "IT8712" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void it8712_release_port(struct uart_port *port)
++{
++// printk("it8712 release port : \n");
++
++ release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int it8712_request_port(struct uart_port *port)
++{
++ return request_mem_region(port->mapbase, UART_PORT_SIZE,
++ "serial_it8712") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void it8712_config_port(struct uart_port *port, int flags)
++{
++
++ if (flags & UART_CONFIG_TYPE) {
++ if (it8712_request_port(port) == 0)
++ port->type = PORT_IT8712;
++ }
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++ int ret = 0;
++
++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++ ret = -EINVAL;
++ if (ser->irq < 0 || ser->irq >= NR_IRQS)
++ ret = -EINVAL;
++ if (ser->baud_base < 9600)
++ ret = -EINVAL;
++ return ret;
++}
++
++static struct uart_ops it8712_pops = {
++ .tx_empty = it8712_tx_empty,
++ .set_mctrl = it8712_set_mctrl_null,
++ .get_mctrl = it8712_get_mctrl,
++ .stop_tx = it8712_stop_tx,
++ .start_tx = it8712_start_tx,
++ .stop_rx = it8712_stop_rx,
++ .enable_ms = it8712_enable_ms,
++ .break_ctl = it8712_break_ctl,
++ .startup = it8712_startup,
++ .shutdown = it8712_shutdown,
++ .set_termios = it8712_set_termios,
++ .type = it8712_type,
++ .release_port = it8712_release_port,
++ .request_port = it8712_request_port,
++ .config_port = it8712_config_port,
++ .verify_port = it8712_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port it8712_ports[UART_NR] = {
++ {
++ membase: (void *)0,
++ mapbase: 0,
++ iotype: SERIAL_IO_MEM,
++ irq: 0,
++ uartclk: UART_CLK/2,
++ fifosize: 16,
++ ops: &it8712_pops,
++ flags: ASYNC_BOOT_AUTOCONF,
++ }
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_IT8712_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int it8712_console_read(struct uart_port *port, char *s, u_int count)
++{
++ unsigned int status;
++ int c;
++#ifdef DEBUG
++ printk("it8712_console_read() called\n");
++#endif
++
++ c = 0;
++ while (c < count) {
++ status = UART_GET_LSR(port);
++ if (UART_RX_DATA(status)) {
++ *s++ = UART_GET_CHAR(port);
++ c++;
++ } else {
++ // nothing more to get, return
++ return c;
++ }
++ }
++ // return the count
++ return c;
++}
++#endif
++static void it8712_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++ struct uart_port *port = it8712_ports + co->index;
++ unsigned int status, old_ies;
++ int i;
++
++ /*
++ * First save the CR then disable the interrupts
++ */
++ old_ies = UART_GET_IER(port);
++ //if(old_ies!=7)
++ //{
++ //
++ // printk("old_ies = %x\n",old_ies);
++ // old_ies = 7;
++ //}
++ UART_PUT_IER(port,0x0);
++
++ /*
++ * Now, do each character
++ */
++ for (i = 0; i < count; i++) {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, s[i]);
++ if (s[i] == '\n') {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, '\r');
++ }
++ }
++
++ /*
++ * Finally, wait for transmitter to become empty
++ * and restore the IES
++ */
++ do {
++ status = UART_GET_LSR(port);
++ } while (!(status&UART_LSR_THRE));
++ UART_PUT_IER(port, old_ies);
++#endif
++}
++
++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++ //printk("it8712 console get options : \n");
++
++ u_int uart_mc, quot;
++ uart_mc= UART_GET_MCR(port);
++
++ *parity = 'n';
++ if (uart_mc & UART_LCR_PARITY) {
++ if (uart_mc & UART_LCR_EVEN)
++ *parity = 'e';
++ else
++ *parity = 'o';
++ }
++
++ switch (uart_mc & UART_LCR_MSK){
++
++ case UART_LCR_WLEN5:
++ *bits = 5;
++ break;
++ case UART_LCR_WLEN6:
++ *bits = 6;
++ break;
++ case UART_LCR_WLEN7:
++ *bits = 7;
++ break;
++ case UART_LCR_WLEN8:
++ *bits = 8;
++ break;
++ }
++ UART_PUT_MCR(port,UART_LCR_DLAB);
++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++ UART_PUT_MCR(port,uart_mc);
++ *baud = (port->uartclk / (16 *quot));
++}
++
++static int __init it8712_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 38400;
++ int bits = 8;
++ int parity = 'n';
++ int flow= 'n';
++ int base;//, irq;
++ int i ;
++
++ printk("it8712 console setup : \n");
++
++ LPCSetConfig(0, 0x02, 0x01);
++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
++ base = IT8712_IO_BASE;
++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
++ it8712_ports[0].mapbase = base;
++ it8712_ports[0].membase = (void *)IO_ADDRESS(base);
++ it8712_ports[0].irq = IRQ_LPC_OFFSET;
++ // irq = LPCGetConfig(LDN_SERIAL1, 0x70);
++ //it8712_ports[0].irq += irq;
++
++ //printk("it8712 irq is %x \n", it8712_ports[0].irq);
++
++ // setup LPC Host 'quiet mode'
++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
++ //for(i=0;i<1000;i++) ; // delay
++ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
++ LPC_BUS_CTRL = 0xc0;
++ LPC_SERIAL_IRQ_CTRL = 0xc0;
++ for(i=0;i<1000;i++) ;
++ LPC_SERIAL_IRQ_CTRL = 0x80;
++
++#ifdef CONFIG_ARCH_SL2312
++ /*
++ * Check whether an invalid uart number has been specified, and
++ * if so, search for the first available port that does have
++ * console support.
++ */
++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
++#else
++ return -ENODEV;
++#endif
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++ else
++ it8712_console_get_options(port, &baud, &parity, &bits);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++extern struct uart_driver it8712_reg;
++static struct console it8712_console = {
++ .name = SERIAL_IT8712_NAME,
++ .write = it8712_console_write,
++ .device = uart_console_device,
++ .setup = it8712_console_setup,
++ .flags = CON_PRINTBUFFER,
++ .index = 0,
++ .data = &it8712_reg,
++};
++
++static int __init it8712_console_init(void)
++{
++ register_console(&it8712_console);
++ return 0;
++}
++
++console_initcall(it8712_console_init);
++
++#define IT8712_CONSOLE &it8712_console
++#else
++#define IT8712_CONSOLE NULL
++#endif
++
++static struct uart_driver it8712_reg = {
++ .owner = NULL,
++ .driver_name = SERIAL_IT8712_NAME,
++ .dev_name = SERIAL_IT8712_NAME,
++ .major = SERIAL_IT8712_MAJOR,
++ .minor = SERIAL_IT8712_MINOR,
++ .nr = UART_NR,
++ .cons = IT8712_CONSOLE,
++};
++
++static int __init it8712_init(void)
++{
++ int result;
++ //printk("serial_it8712: it871212_init \n");
++
++
++ result = uart_register_driver(&it8712_reg);
++ if(result)
++ return result;
++ result = uart_add_one_port(&it8712_reg, &it8712_ports[0]);
++
++ return result;
++
++}
++
++
++__initcall(it8712_init);
+Index: linux-2.6.23.16/drivers/serial/it8712.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/serial/it8712.h 2008-03-15 17:59:53.568330991 +0200
+@@ -0,0 +1,135 @@
++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
++#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
++#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
++#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
++ * In: Fifo count
++ * Out: Fifo custom trigger levels
++ * XR16C85x only */
++
++#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
++#define UART_IER 1 /* Out: Interrupt Enable Register */
++#define UART_FCTR 1 /* (LCR=BF) Feature Control Register
++ * XR16C85x only */
++
++#define UART_IIR 2 /* In: Interrupt ID Register */
++#define UART_FCR 2 /* Out: FIFO Control Register */
++#define UART_EFR 2 /* I/O: Extended Features Register */
++ /* (DLAB=1, 16C660 only) */
++
++#define UART_LCR 3 /* Out: Line Control Register */
++#define UART_MCR 4 /* Out: Modem Control Register */
++#define UART_LSR 5 /* In: Line Status Register */
++#define UART_MSR 6 /* In: Modem Status Register */
++#define UART_SCR 7 /* I/O: Scratch Register */
++#define UART_EMSR 7 /* (LCR=BF) Extended Mode Select Register
++ * FCTR bit 6 selects SCR or EMSR
++ * XR16c85x only */
++
++/*
++ * These are the definitions for the FIFO Control Register
++ * (16650 only)
++ */
++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
++/* 16650 redefinitions */
++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
++/* TI 16750 definitions */
++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */
++
++/*
++ * These are the definitions for the Line Control Register
++ *
++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
++ */
++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
++#define UART_LCR_SBC 0x40 /* Set break control */
++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
++#define UART_LCR_EPAR 0x10 /* Even parity select */
++#define UART_LCR_PARITY 0x08 /* Parity Enable */
++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
++#define UART_LCR_EVEN 0x18 /* Even parity */
++#define UART_LCR_ODD 0x08 /* Odd parity */
++#define UART_LCR_MSK 0x03
++/*
++ * These are the definitions for the Line Status Register
++ */
++#define UART_LSR_DE 0x80 /* FIFO Data Error */
++#define UART_LSR_TEMT 0x40 /* Transmitter empty */
++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
++#define UART_LSR_BI 0x10 /* Break interrupt indicator */
++#define UART_LSR_FE 0x08 /* Frame error indicator */
++#define UART_LSR_PE 0x04 /* Parity error indicator */
++#define UART_LSR_OE 0x02 /* Overrun error indicator */
++#define UART_LSR_DR 0x01 /* Receiver data ready */
++
++/*
++ * These are the definitions for the Interrupt Identification Register
++ */
++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
++
++#define UART_IIR_MSI 0x00 /* Modem status interrupt */
++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
++#define UART_IIR_RCTO 0x0c /* Receiver character timeout interrupt */
++/*
++ * These are the definitions for the Interrupt Enable Register
++ */
++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
++/*
++ * Sleep mode for ST16650 and TI16750.
++ * Note that for 16650, EFR-bit 4 must be selected as well.
++ */
++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
++
++/*
++ * These are the definitions for the Modem Control Register
++ */
++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
++#define UART_MCR_OUT2 0x08 /* Out2 complement */
++#define UART_MCR_OUT1 0x04 /* Out1 complement */
++#define UART_MCR_RTS 0x02 /* RTS complement */
++#define UART_MCR_DTR 0x01 /* DTR complement */
++
++/*
++ * These are the definitions for the Modem Status Register
++ */
++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
++#define UART_MSR_RI 0x40 /* Ring Indicator */
++#define UART_MSR_DSR 0x20 /* Data Set Ready */
++#define UART_MSR_CTS 0x10 /* Clear to Send */
++#define UART_MSR_DDCD 0x08 /* Delta DCD */
++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
++#define UART_MSR_DDSR 0x02 /* Delta DSR */
++#define UART_MSR_DCTS 0x01 /* Delta CTS */
++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
++
++#define UART_PARITY_NONE 0x00
++#define UART_PARITY_ODD 0x01
++#define UART_PARITY_EVEN 0x02
++
++
++
+Index: linux-2.6.23.16/drivers/serial/serial_it8712.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/serial/serial_it8712.c 2008-03-15 17:59:53.568330991 +0200
+@@ -0,0 +1,876 @@
++/*
++ * linux/drivers/char/serial_uart00.c
++ *
++ * Driver for UART00 serial ports
++ *
++ * Based on drivers/char/serial_amba.c, by ARM Limited &
++ * Deep Blue Solutions Ltd.
++ * Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
++ *
++ */
++#include <linux/module.h>
++
++#include <linux/errno.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/major.h>
++#include <linux/string.h>
++#include <linux/fcntl.h>
++#include <linux/ptrace.h>
++#include <linux/ioport.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/circ_buf.h>
++#include <linux/serial.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++#include <asm/bitops.h>
++#include <asm/sizes.h>
++
++#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <linux/serial_core.h>
++#include <asm/arch/sl2312.h>
++#include <asm/arch/int_ctrl.h>
++#include <asm/arch/it8712.h>
++#include "serial_it8712.h"
++
++//#define DEBUG 1
++#define UART_NR 1
++
++#define SERIAL_IT8712_NAME "ttySI"
++#define SERIAL_IT8712_MAJOR 204
++#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */
++#define SERIAL_IT8712_NR UART_NR
++#define UART_PORT_SIZE 0x50
++
++#define CALLOUT_IT8712_NAME "cuaslI"
++#define CALLOUT_IT8712_MAJOR 205
++#define CALLOUT_IT8712_MINOR 41 /* Temporary - will change in future */
++#define CALLOUT_IT8712_NR UART_NR
++#define LPC_HOST_CONTINUE_MODE 0x00000040
++
++#define IT8712_NO_PORTS UART_NR
++
++static struct tty_driver normal, callout;
++static struct tty_struct *it8712_table[UART_NR];
++static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR];
++static struct console it8712_console;
++
++#define IT8712_ISR_PASS_LIMIT 256
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification
++#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable
++#define UART_GET_IER(p) inb(((p)->membase+UART_IER))
++#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding
++#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer
++#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status
++#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status
++#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control
++#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR))
++#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control
++#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR))
++#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control
++#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM))
++#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM))
++#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL))
++#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL))
++#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
++#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
++
++static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
++{
++ unsigned int reg;
++
++// printk("it8712 stop tx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_THRI);
++ UART_PUT_IER(port, reg);
++}
++
++static void it8712_stop_rx(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("it8712 stop rx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_RDI);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void it8712_enable_ms(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("it8712 enable ms : \n");
++
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_MSI);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void
++it8712_rx_chars(struct uart_info *info, struct pt_regs *regs)
++{
++ struct tty_struct *tty = info->tty;
++ unsigned int status, mask, ch, flg, ignored = 0;
++ struct uart_port *port = info->port;
++
++ // printk("it8712_rx_chars : \n");
++ status = UART_GET_LSR(port);
++ while (UART_RX_DATA(status)) {
++
++ /*
++ * We need to read rds before reading the
++ * character from the fifo
++ */
++ ch = UART_GET_CHAR(port);
++ port->icount.rx++;
++
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ goto ignore_char;
++
++ flg = TTY_NORMAL;
++
++ /*
++ * Note that the error handling code is
++ * out of the main execution path
++ */
++
++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++ goto handle_error;
++ if (uart_handle_sysrq_char(info, ch, regs))
++ goto ignore_char;
++
++ error_return:
++ *tty->flip.flag_buf_ptr++ = flg;
++ *tty->flip.char_buf_ptr++ = ch;
++ tty->flip.count++;
++ ignore_char:
++ status = UART_GET_LSR(port);
++ } // end of while
++out:
++ tty_flip_buffer_push(tty);
++ return;
++
++handle_error:
++ if (status & UART_LSR_BI) {
++ status &= ~(UART_LSR_FE);
++ port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++ if (uart_handle_break(info, &it8712_console))
++ goto ignore_char;
++#endif
++ } else if (status & UART_LSR_PE)
++ port->icount.parity++;
++ else if (status & UART_LSR_FE)
++ port->icount.frame++;
++
++ if (status & UART_LSR_OE)
++ port->icount.overrun++;
++
++ if (status & port->ignore_status_mask) {
++ if (++ignored > 100)
++ goto out;
++ goto ignore_char;
++ }
++
++ mask = status & port->read_status_mask;
++
++ if (mask & UART_LSR_BI)
++ flg = TTY_BREAK;
++ else if (mask & UART_LSR_PE)
++ flg = TTY_PARITY;
++ else if (mask & UART_LSR_FE)
++ flg = TTY_FRAME;
++
++ if (status & UART_LSR_OE) {
++ /*
++ * CHECK: does overrun affect the current character?
++ * ASSUMPTION: it does not.
++ */
++ *tty->flip.flag_buf_ptr++ = flg;
++ *tty->flip.char_buf_ptr++ = ch;
++ tty->flip.count++;
++ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ goto ignore_char;
++ ch = 0;
++ flg = TTY_OVERRUN;
++ }
++#ifdef SUPPORT_SYSRQ
++ info->sysrq = 0;
++#endif
++ goto error_return;
++}
++
++static void it8712_tx_chars(struct uart_info *info)
++{
++ int count;
++ struct uart_port *port=info->port;
++
++ if (port->x_char) {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, port->x_char);
++ port->icount.tx++;
++ port->x_char = 0;
++
++ return;
++ }
++ if (info->xmit.head == info->xmit.tail
++ || info->tty->stopped
++ || info->tty->hw_stopped) {
++ it8712_stop_tx(info->port, 0);
++ return;
++ }
++
++ count = port->fifosize >> 1;
++ do {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]);
++ info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (info->xmit.head == info->xmit.tail)
++ break;
++ } while (--count > 0);
++
++ if (CIRC_CNT(info->xmit.head,
++ info->xmit.tail,
++ UART_XMIT_SIZE) < WAKEUP_CHARS)
++ uart_event(info, EVT_WRITE_WAKEUP);
++
++ if (info->xmit.head == info->xmit.tail)
++ it8712_stop_tx(info->port, 0);
++}
++
++static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty)
++{
++ unsigned int reg;
++ struct uart_info *info=(struct uart_info*)(port->iobase);
++
++// printk("it8712 start tx : \n");
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_THRI);
++ UART_PUT_IER(port, reg);
++ it8712_tx_chars(info);
++}
++
++static void it8712_modem_status(struct uart_info *info)
++{
++ unsigned int status;
++ struct uart_icount *icount = &info->port->icount;
++
++// printk("it8712 modem status : \n");
++
++ status = UART_GET_MSR(info->port);
++
++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++ UART_MSR_TERI | UART_MSR_DDCD)))
++ return;
++
++ if (status & UART_MSR_DCD) {
++ icount->dcd++;
++#ifdef CONFIG_HARD_PPS
++ if ((info->flags & ASYNC_HARDPPS_CD) &&
++ (status & UART_MSR_DCD_MSK))
++ hardpps();
++#endif
++ if (info->flags & ASYNC_CHECK_CD) {
++ if (status & UART_MSR_DCD)
++ wake_up_interruptible(&info->open_wait);
++ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
++ (info->flags & ASYNC_CALLOUT_NOHUP))) {
++ if (info->tty)
++ tty_hangup(info->tty);
++ }
++ }
++ }
++
++ if (status & UART_MSR_DDSR)
++ icount->dsr++;
++
++ if (status & UART_MSR_DCTS) {
++ icount->cts++;
++
++ if (info->flags & ASYNC_CTS_FLOW) {
++ status &= UART_MSR_CTS;
++
++ if (info->tty->hw_stopped) {
++ if (status) {
++ info->tty->hw_stopped = 0;
++ info->ops->start_tx(info->port, 1, 0);
++ uart_event(info, EVT_WRITE_WAKEUP);
++ }
++ } else {
++ if (!status) {
++ info->tty->hw_stopped = 1;
++ info->ops->stop_tx(info->port, 0);
++ }
++ }
++ }
++ }
++ wake_up_interruptible(&info->delta_msr_wait);
++
++}
++
++static void it8712_int(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct uart_info *info = dev_id;
++ unsigned int status, pass_counter = 0;
++
++ status = UART_GET_INT_STATUS(info->port);
++ do {
++// printk("it8712_int: status %x \n", status);
++ switch(status)
++ {
++ case UART_IIR_RDI:
++ case UART_IIR_RLSI:
++ case UART_IIR_RCTO:
++ it8712_rx_chars(info, regs);
++ break;
++ case UART_IIR_THRI:
++ it8712_tx_chars(info);
++ break;
++ case UART_IIR_MSI:
++ it8712_modem_status(info);
++ break;
++ default:
++ break;
++ }
++ if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
++ break;
++
++ status = UART_GET_INT_STATUS(info->port);
++ } while (status);
++}
++
++static u_int it8712_tx_empty(struct uart_port *port)
++{
++// printk("it8712 tx empty : \n");
++
++ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
++}
++
++static u_int it8712_get_mctrl(struct uart_port *port)
++{
++ unsigned int result = 0;
++ unsigned int status;
++
++// printk("it8712 get mctrl : \n");
++
++ status = UART_GET_MSR(port);
++ if (status & UART_MSR_DCD)
++ result |= TIOCM_CAR;
++ if (status & UART_MSR_DSR)
++ result |= TIOCM_DSR;
++ if (status & UART_MSR_CTS)
++ result |= TIOCM_CTS;
++ if (status & UART_MSR_RI)
++ result |= TIOCM_RI;
++
++ return result;
++}
++
++static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void it8712_break_ctl(struct uart_port *port, int break_state)
++{
++ unsigned int lcr;
++
++// printk("it8712 break ctl : \n");
++
++ lcr = UART_GET_LCR(port);
++ if (break_state == -1)
++ lcr |= UART_LCR_SBC;
++ else
++ lcr &= ~UART_LCR_SBC;
++ UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud)
++{
++ u_int quot;
++
++ /* Special case: B0 rate */
++ if (!baud)
++ baud = 9600;
++
++ quot = (info->port->uartclk/(16 * baud)) ;
++
++ return quot;
++}
++static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
++{
++ u_int uart_mc=0, old_ier;
++ unsigned long flags;
++
++#ifdef DEBUG
++ printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++
++
++ /* byte size and parity */
++ switch (cflag & CSIZE) {
++ case CS5: uart_mc = UART_LCR_WLEN5; break;
++ case CS6: uart_mc = UART_LCR_WLEN6; break;
++ case CS7: uart_mc = UART_LCR_WLEN7; break;
++ default: uart_mc = UART_LCR_WLEN8; break; // CS8
++ }
++ if (cflag & CSTOPB)
++ uart_mc|= UART_LCR_STOP;
++ if (cflag & PARENB) {
++ uart_mc |= UART_LCR_EVEN;
++ if (!(cflag & PARODD))
++ uart_mc |= UART_LCR_ODD;
++ }
++
++ port->read_status_mask = UART_LSR_OE;
++ if (iflag & INPCK)
++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (iflag & (BRKINT | PARMRK))
++ port->read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characters to ignore
++ */
++ port->ignore_status_mask = 0;
++ if (iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (iflag & IGNBRK) {
++ port->ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns to (for real raw support).
++ */
++ if (iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_OE;
++ }
++
++ /* first, disable everything */
++ save_flags(flags); cli();
++ old_ier = UART_GET_IER(port);
++
++ if ((port->flags & ASYNC_HARDPPS_CD) ||
++ (cflag & CRTSCTS) || !(cflag & CLOCAL))
++ old_ier |= UART_IER_MSI;
++
++ /* Set baud rate */
++ quot = quot / 13;
++ UART_PUT_LCR(port, UART_LCR_DLAB);
++ UART_PUT_DIV_LO(port, (quot & 0xff));
++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++ UART_PUT_LCR(port, uart_mc);
++// UART_PUT_LCR(port, 0x07); // ???? it is wired
++ UART_PUT_MCR(port, 0x08);
++ UART_PUT_FCR(port, 0x01);
++ UART_PUT_IER(port, 0x05);
++
++ restore_flags(flags);
++}
++
++static int it8712_startup(struct uart_port *port, struct uart_info *info)
++{
++ int retval;
++ unsigned int regs;
++
++// printk("it8712 startup : \n");
++
++ /*
++ * Use iobase to store a pointer to info. We need this to start a
++ * transmission as the tranmittr interrupt is only generated on
++ * the transition to the idle state
++ */
++
++ port->iobase=(u_int)info;
++
++ /*
++ * Allocate the IRQ
++ */
++ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info);
++ if (retval)
++ return retval;
++
++ /* setup interrupt controller */
++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs |= (IRQ_SERIRQ0_MASK);
++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs &= ~(IRQ_SERIRQ0_MASK);
++ *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK);
++
++ /*
++ * Finally, enable interrupts. Use the TII interrupt to minimise
++ * the number of interrupts generated. If higher performance is
++ * needed, consider using the TI interrupt with a suitable FIFO
++ * threshold
++ */
++ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
++
++ return 0;
++}
++
++static void it8712_shutdown(struct uart_port *port, struct uart_info *info)
++{
++// printk("it8712 shutdown : \n");
++
++ /*
++ * disable all interrupts, disable the port
++ */
++ UART_PUT_IER(port, 0x0);
++
++ /* disable break condition and fifos */
++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++ /*
++ * Free the interrupt
++ */
++ free_irq(port->irq, info);
++}
++
++static const char *it8712_type(struct uart_port *port)
++{
++ return port->type == PORT_IT8712 ? "IT8712" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void it8712_release_port(struct uart_port *port)
++{
++// printk("it8712 release port : \n");
++
++ release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int it8712_request_port(struct uart_port *port)
++{
++ return request_mem_region(port->mapbase, UART_PORT_SIZE,
++ "serial_it8712") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void it8712_config_port(struct uart_port *port, int flags)
++{
++
++ if (flags & UART_CONFIG_TYPE) {
++ if (it8712_request_port(port) == 0)
++ port->type = PORT_IT8712;
++ }
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++ int ret = 0;
++
++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++ ret = -EINVAL;
++ if (ser->irq < 0 || ser->irq >= NR_IRQS)
++ ret = -EINVAL;
++ if (ser->baud_base < 9600)
++ ret = -EINVAL;
++ return ret;
++}
++
++static struct uart_ops it8712_pops = {
++ tx_empty: it8712_tx_empty,
++ set_mctrl: it8712_set_mctrl_null,
++ get_mctrl: it8712_get_mctrl,
++ stop_tx: it8712_stop_tx,
++ start_tx: it8712_start_tx,
++ stop_rx: it8712_stop_rx,
++ enable_ms: it8712_enable_ms,
++ break_ctl: it8712_break_ctl,
++ startup: it8712_startup,
++ shutdown: it8712_shutdown,
++ change_speed: it8712_change_speed,
++ type: it8712_type,
++ release_port: it8712_release_port,
++ request_port: it8712_request_port,
++ config_port: it8712_config_port,
++ verify_port: it8712_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port it8712_ports[UART_NR] = {
++ {
++ membase: (void *)0,
++ mapbase: 0,
++ iotype: SERIAL_IO_MEM,
++ irq: 0,
++ uartclk: UART_CLK/2,
++ fifosize: 16,
++ ops: &it8712_pops,
++ flags: ASYNC_BOOT_AUTOCONF,
++ }
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_IT8712_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int it8712_console_read(struct uart_port *port, char *s, u_int count)
++{
++ unsigned int status;
++ int c;
++#ifdef DEBUG
++ printk("it8712_console_read() called\n");
++#endif
++
++ c = 0;
++ while (c < count) {
++ status = UART_GET_LSR(port);
++ if (UART_RX_DATA(status)) {
++ *s++ = UART_GET_CHAR(port);
++ c++;
++ } else {
++ // nothing more to get, return
++ return c;
++ }
++ }
++ // return the count
++ return c;
++}
++#endif
++static void it8712_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++ struct uart_port *port = it8712_ports + co->index;
++ unsigned int status, old_ies;
++ int i;
++
++ /*
++ * First save the CR then disable the interrupts
++ */
++ old_ies = UART_GET_IER(port);
++ UART_PUT_IER(port,0x0);
++
++ /*
++ * Now, do each character
++ */
++ for (i = 0; i < count; i++) {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, s[i]);
++ if (s[i] == '\n') {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, '\r');
++ }
++ }
++
++ /*
++ * Finally, wait for transmitter to become empty
++ * and restore the IES
++ */
++ do {
++ status = UART_GET_LSR(port);
++ } while (!(status&UART_LSR_THRE));
++ UART_PUT_IER(port, old_ies);
++#endif
++}
++
++static kdev_t it8712_console_device(struct console *co)
++{
++ return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index);
++}
++
++static int it8712_console_wait_key(struct console *co)
++{
++#ifdef CONFIG_ARCH_SL2312
++ struct uart_port *port = (it8712_ports + co->index);
++ unsigned int status;
++
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_RX_DATA(status));
++ return UART_GET_CHAR(port);
++#else
++ return 0;
++#endif
++}
++
++static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++ printk("it8712 console get options : \n");
++
++ u_int uart_mc, quot;
++ uart_mc= UART_GET_MCR(port);
++
++ *parity = 'n';
++ if (uart_mc & UART_LCR_PARITY) {
++ if (uart_mc & UART_LCR_EVEN)
++ *parity = 'e';
++ else
++ *parity = 'o';
++ }
++
++ switch (uart_mc & UART_LCR_MSK){
++
++ case UART_LCR_WLEN5:
++ *bits = 5;
++ break;
++ case UART_LCR_WLEN6:
++ *bits = 6;
++ break;
++ case UART_LCR_WLEN7:
++ *bits = 7;
++ break;
++ case UART_LCR_WLEN8:
++ *bits = 8;
++ break;
++ }
++ UART_PUT_MCR(port,UART_LCR_DLAB);
++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++ UART_PUT_MCR(port,uart_mc);
++ *baud = (port->uartclk / (16 *quot));
++}
++
++static int __init it8712_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 38400;
++ int bits = 8;
++ int parity = 'n';
++ int flow= 'n';
++ int base, irq;
++ int i ;
++
++// printk("it8712 console setup : \n");
++
++ LPCSetConfig(0, 0x02, 0x01);
++ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
++ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
++ base = IT8712_IO_BASE;
++ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
++ it8712_ports[0].mapbase = base;
++ it8712_ports[0].membase = IO_ADDRESS(base);
++ it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET;
++ irq = LPCGetConfig(LDN_SERIAL1, 0x70);
++ it8712_ports[0].irq += irq;
++
++ printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq);
++
++ // setup LPC Host 'quiet mode'
++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
++ for(i=0;i<1000;i++) ; // delay
++ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
++
++#ifdef CONFIG_ARCH_SL2312
++ /*
++ * Check whether an invalid uart number has been specified, and
++ * if so, search for the first available port that does have
++ * console support.
++ */
++ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
++#else
++ return -ENODEV;
++#endif
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++ else
++ it8712_console_get_options(port, &baud, &parity, &bits);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++static struct console it8712_console = {
++ name: SERIAL_IT8712_NAME,
++ write: it8712_console_write,
++#ifdef used_and_not_const_char_pointer
++ read: it8712_console_read,
++#endif
++ device: it8712_console_device,
++// wait_key: it8712_console_wait_key,
++ setup: it8712_console_setup,
++ flags: (CON_PRINTBUFFER|CON_ENABLED),
++ index: -1,
++};
++
++void __init it8712_console_init(void)
++{
++ register_console(&it8712_console);
++}
++
++#define IT8712_CONSOLE &it8712_console
++#else
++#define IT8712_CONSOLE NULL
++#endif
++
++static struct uart_driver it8712_reg = {
++ owner: NULL,
++ normal_major: SERIAL_IT8712_MAJOR,
++ normal_name: SERIAL_IT8712_NAME,
++ normal_driver: &normal,
++ callout_major: CALLOUT_IT8712_MAJOR,
++ callout_name: CALLOUT_IT8712_NAME,
++ callout_driver: &callout,
++ table: it8712_table,
++ termios: it8712_termios,
++ termios_locked: it8712_termios_locked,
++ minor: SERIAL_IT8712_MINOR,
++ nr: UART_NR,
++#ifdef CONFIG_ARCH_SL2312
++ port: it8712_ports,
++#endif
++ state: NULL,
++ cons: IT8712_CONSOLE,
++};
++
++static int __init it8712_init(void)
++{
++// printk("serial_it8712: it871212_init \n");
++
++ return uart_register_driver(&it8712_reg);
++}
++
++
++__initcall(it8712_init);
+Index: linux-2.6.23.16/drivers/serial/serial_sl2312.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/serial/serial_sl2312.c 2008-03-17 12:30:50.290536619 +0200
+@@ -0,0 +1,827 @@
++/*
++ * linux/drivers/char/serial_uart00.c
++ *
++ * Driver for UART00 serial ports
++ *
++ * Based on drivers/char/serial_amba.c, by ARM Limited &
++ * Deep Blue Solutions Ltd.
++ * Copyright 2001 Altera Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ * $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
++ *
++ */
++#include <linux/module.h>
++
++#include <linux/errno.h>
++#include <linux/signal.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/tty.h>
++#include <linux/tty_flip.h>
++#include <linux/major.h>
++#include <linux/string.h>
++#include <linux/fcntl.h>
++#include <linux/ptrace.h>
++#include <linux/ioport.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/circ_buf.h>
++#include <linux/serial.h>
++#include <linux/console.h>
++#include <linux/sysrq.h>
++#include <linux/serial_core.h>
++
++#include <asm/system.h>
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/uaccess.h>
++#include <asm/bitops.h>
++#include <asm/sizes.h>
++#include <linux/spinlock.h>
++#include <linux/irq.h>
++
++
++#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
++#define SUPPORT_SYSRQ
++#endif
++
++#include <asm/arch/sl2312.h>
++#define UART_TYPE (volatile unsigned int*)
++#include <asm/arch/uart.h>
++#include <asm/arch/int_ctrl.h>
++
++// #define DEBUG 1
++#define UART_NR 1
++
++
++#define SERIAL_SL2312_NAME "ttySL"
++#define SERIAL_SL2312_MAJOR 204
++#define SERIAL_SL2312_MINOR 40 /* Temporary - will change in future */
++#define SERIAL_SL2312_NR UART_NR
++#define UART_PORT_SIZE 0x50
++
++#define SL2312_NO_PORTS UART_NR
++#define SL2312_ISR_PASS_LIMIT 256
++
++/*
++ * Access macros for the SL2312 UARTs
++ */
++#define UART_GET_INT_STATUS(p) (inl(UART_IIR((p)->membase)) & 0x0F) // interrupt identification
++#define UART_PUT_IER(p, c) outl(c,UART_IER((p)->membase)) // interrupt enable
++#define UART_GET_IER(p) inl(UART_IER((p)->membase))
++#define UART_PUT_CHAR(p, c) outl(c,UART_THR((p)->membase)) // transmitter holding
++#define UART_GET_CHAR(p) inl(UART_RBR((p)->membase)) // receive buffer
++#define UART_GET_LSR(p) inl(UART_LSR((p)->membase)) // line status
++#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) // modem status
++#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) // modem control
++#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase))
++#define UART_GET_LCR(p) inl(UART_LCR((p)->membase)) // mode control
++#define UART_PUT_LCR(p, c) outl(c,UART_LCR((p)->membase))
++#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase))
++#define UART_PUT_DIV_HI(p, c) outl(c,UART_DIV_HI((p)->membase))
++#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase))
++#define UART_PUT_DIV_LO(p, c) outl(c,UART_DIV_LO((p)->membase))
++#define UART_PUT_MDR(p, c) outl(c,UART_MDR((p)->membase))
++#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
++#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
++
++
++static void sl2312_stop_tx(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("sl2312 stop tx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_TE);
++ UART_PUT_IER(port, reg);
++}
++
++static void sl2312_stop_rx(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("sl2312 stop rx : \n");
++ reg = UART_GET_IER(port);
++ reg &= ~(UART_IER_DR);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void sl2312_enable_ms(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("sl2312 enable ms : \n");
++
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_MS);
++ UART_PUT_IER(port, reg);
++
++}
++
++static void
++sl2312_rx_chars(struct uart_port *port)
++{
++ struct tty_struct *tty = port->info->tty;
++ unsigned int status, mask, ch, flg, ignored = 0;
++
++
++ // printk("sl2312_rx_chars : \n");
++ status = UART_GET_LSR(port);
++ while (UART_RX_DATA(status)) {
++
++ /*
++ * We need to read rds before reading the
++ * character from the fifo
++ */
++ ch = UART_GET_CHAR(port);
++ port->icount.rx++;
++
++ //if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ if (tty && !tty_buffer_request_room(tty, 1))
++ goto ignore_char;
++
++ flg = TTY_NORMAL;
++
++ /*
++ * Note that the error handling code is
++ * out of the main execution path
++ */
++
++ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
++ goto handle_error;
++ if (uart_handle_sysrq_char(port, ch))
++ goto ignore_char;
++
++ error_return:
++ //*tty->flip.flag_buf_ptr++ = flg;
++ //*tty->flip.char_buf_ptr++ = ch;
++ //tty->flip.count++;
++ tty_insert_flip_char(tty, ch, flg);
++ ignore_char:
++ status = UART_GET_LSR(port);
++ } // end of while
++out:
++ tty_flip_buffer_push(tty);
++ return;
++
++handle_error:
++ if (status & UART_LSR_BI) {
++ status &= ~(UART_LSR_FE);
++ port->icount.brk++;
++
++#ifdef SUPPORT_SYSRQ
++ if (uart_handle_break(port))
++ goto ignore_char;
++#endif
++ } else if (status & UART_LSR_PE)
++ port->icount.parity++;
++ else if (status & UART_LSR_FE)
++ port->icount.frame++;
++
++ if (status & UART_LSR_OE)
++ port->icount.overrun++;
++
++ if (status & port->ignore_status_mask) {
++ if (++ignored > 100)
++ goto out;
++ goto ignore_char;
++ }
++
++ mask = status & port->read_status_mask;
++
++ if (mask & UART_LSR_BI)
++ flg = TTY_BREAK;
++ else if (mask & UART_LSR_PE)
++ flg = TTY_PARITY;
++ else if (mask & UART_LSR_FE)
++ flg = TTY_FRAME;
++
++ if (status & UART_LSR_OE) {
++ /*
++ * CHECK: does overrun affect the current character?
++ * ASSUMPTION: it does not.
++ */
++ //*tty->flip.flag_buf_ptr++ = flg;
++ //*tty->flip.char_buf_ptr++ = ch;
++ //tty->flip.count++;
++
++ tty_insert_flip_char(tty, 0, TTY_BREAK);
++
++ // if (tty->flip.count >= TTY_FLIPBUF_SIZE)
++ if (tty_buffer_request_room(tty, 1))
++ goto ignore_char;
++ ch = 0;
++ flg = TTY_OVERRUN;
++ }
++#ifdef SUPPORT_SYSRQ
++ port->sysrq = 0;
++#endif
++ goto error_return;
++}
++
++static void sl2312_tx_chars(struct uart_port *port)
++{
++ struct circ_buf *xmit = &port->info->xmit;
++ int count;
++
++
++ if (port->x_char) {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, port->x_char);
++ port->icount.tx++;
++ port->x_char = 0;
++
++ return;
++ }
++ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
++ sl2312_stop_tx(port);
++
++ return;
++ }
++
++ count = port->fifosize >> 1;
++ do {
++ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
++ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
++ port->icount.tx++;
++ if (uart_circ_empty(xmit))
++ break;
++ } while (--count > 0);
++
++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
++ uart_write_wakeup(port);
++
++ if (uart_circ_empty(xmit))
++ sl2312_stop_tx(port);
++
++}
++
++static void sl2312_start_tx(struct uart_port *port)
++{
++ unsigned int reg;
++
++// printk("sl2312 start tx : \n");
++ reg = UART_GET_IER(port);
++ reg |= (UART_IER_TE);
++ UART_PUT_IER(port, reg);
++
++ sl2312_tx_chars(port);
++}
++
++static void sl2312_modem_status(struct uart_port *port)
++{
++ unsigned int status;
++
++// printk("it8712 modem status : \n");
++
++ status = UART_GET_MSR(port);
++
++ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
++ UART_MSR_TERI | UART_MSR_DDCD)))
++ return;
++
++ if (status & UART_MSR_DDCD)
++ uart_handle_dcd_change(port, status & UART_MSR_DCD);
++
++ if (status & UART_MSR_DDSR)
++ port->icount.dsr++;
++
++ if (status & UART_MSR_DCTS)
++ uart_handle_cts_change(port, status & UART_MSR_CTS);
++
++ wake_up_interruptible(&port->info->delta_msr_wait);
++
++}
++
++static irqreturn_t sl2312_int(int irq, void *dev_id)
++{
++ struct uart_port *port = dev_id;
++ unsigned int status, pass_counter = 0;
++
++ status = UART_GET_INT_STATUS(port);
++ do {
++ switch(status)
++ {
++ case UART_IIR_DR:
++ case UART_IIR_RLS:
++ sl2312_rx_chars(port);
++ break;
++ case UART_IIR_TE:
++ sl2312_tx_chars(port);
++ break;
++ case UART_IIR_MODEM:
++ sl2312_modem_status(port);
++ break;
++ default:
++ break;
++ }
++ if (pass_counter++ > SL2312_ISR_PASS_LIMIT)
++ break;
++
++ status = UART_GET_INT_STATUS(port);
++ } while (status);
++
++ return IRQ_HANDLED;
++}
++
++static u_int sl2312_tx_empty(struct uart_port *port)
++{
++// printk("sl2312 tx empty : \n");
++
++ return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0);
++}
++
++static u_int sl2312_get_mctrl(struct uart_port *port)
++{
++ unsigned int result = 0;
++ unsigned int status;
++
++// printk("sl2312 get mctrl : \n");
++
++ status = UART_GET_MSR(port);
++ if (status & UART_MSR_DCD)
++ result |= TIOCM_CAR;
++ if (status & UART_MSR_DSR)
++ result |= TIOCM_DSR;
++ if (status & UART_MSR_CTS)
++ result |= TIOCM_CTS;
++ if (status & UART_MSR_RI)
++ result |= TIOCM_RI;
++
++ return result;
++}
++
++static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl)
++{
++}
++
++static void sl2312_break_ctl(struct uart_port *port, int break_state)
++{
++ unsigned int lcr;
++
++// printk("sl2312 break ctl : \n");
++
++ lcr = UART_GET_LCR(port);
++ if (break_state == -1)
++ lcr |= UART_LCR_SETBREAK;
++ else
++ lcr &= ~UART_LCR_SETBREAK;
++ UART_PUT_LCR(port, lcr);
++}
++
++static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
++{
++ u_int quot;
++
++ /* Special case: B0 rate */
++ if (!baud)
++ baud = 9600;
++
++ quot = (port->uartclk / (16 * baud)-1) ;
++
++ return quot;
++}
++
++static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
++{
++ unsigned int uart_mc, old_ier, baud, quot;
++ unsigned long flags;
++
++ termios->c_cflag |= CREAD;
++#ifdef DEBUG
++ printk("it8712_set_cflag(0x%x) called\n", cflag);
++#endif
++ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++ quot = (port->uartclk / (16 * baud)) ;
++ //uart_get_divisor(port, baud);
++
++ /* byte size and parity */
++ switch (termios->c_cflag & CSIZE) {
++ case CS5:
++ uart_mc = UART_LCR_LEN5;
++ break;
++ case CS6:
++ uart_mc = UART_LCR_LEN6;
++ break;
++ case CS7:
++ uart_mc = UART_LCR_LEN7;
++ break;
++ default: // CS8
++ uart_mc = UART_LCR_LEN8;
++ break;
++ }
++
++ if (termios->c_cflag & CSTOPB)
++ uart_mc|= UART_LCR_STOP;
++ if (termios->c_cflag & PARENB) {
++ uart_mc |= UART_LCR_EVEN;
++ if (!(termios->c_cflag & PARODD))
++ uart_mc |= UART_LCR_ODD;
++ }
++
++ spin_lock_irqsave(&port->lock, flags);
++ /*
++ * Update the per-port timeout
++ */
++ uart_update_timeout(port, termios->c_cflag, baud);
++ port->read_status_mask = UART_LSR_OE;
++ if (termios->c_iflag & INPCK)
++ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & (BRKINT | PARMRK))
++ port->read_status_mask |= UART_LSR_BI;
++
++ /*
++ * Characters to ignore
++ */
++ port->ignore_status_mask = 0;
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
++ if (termios->c_iflag & IGNBRK) {
++ port->ignore_status_mask |= UART_LSR_BI;
++ /*
++ * If we're ignoring parity and break indicators,
++ * ignore overruns to (for real raw support).
++ */
++ if (termios->c_iflag & IGNPAR)
++ port->ignore_status_mask |= UART_LSR_OE;
++ }
++
++ //save_flags(flags); cli();
++ old_ier = UART_GET_IER(port);
++
++ if(UART_ENABLE_MS(port, termios->c_cflag))
++ old_ier |= UART_IER_MS;
++
++ /* Set baud rate */
++ UART_PUT_LCR(port, UART_LCR_DLAB);
++ UART_PUT_DIV_LO(port, (quot & 0xff));
++ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
++
++ UART_PUT_LCR(port, uart_mc);
++ UART_PUT_IER(port, old_ier);
++
++ //restore_flags(flags);
++ spin_unlock_irqrestore(&port->lock, flags);
++}
++
++
++
++static int sl2312_startup(struct uart_port *port)
++{
++ int retval;
++ unsigned int regs;
++
++// printk("sl2312 startup : \n");
++
++ /*
++ * Use iobase to store a pointer to info. We need this to start a
++ * transmission as the tranmittr interrupt is only generated on
++ * the transition to the idle state
++ */
++
++ /*
++ * Allocate the IRQ
++ */
++ retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port);
++ if (retval)
++ return retval;
++
++ /* setup interrupt controller */
++ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs &= ~(IRQ_UART_MASK);
++ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
++ regs &= ~(IRQ_UART_MASK);
++ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
++ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK);
++
++ /*
++ * Finally, enable interrupts. Use the TII interrupt to minimise
++ * the number of interrupts generated. If higher performance is
++ * needed, consider using the TI interrupt with a suitable FIFO
++ * threshold
++ */
++ UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE));
++
++ return 0;
++}
++
++static void sl2312_shutdown(struct uart_port *port)
++{
++// printk("sl2312 shutdown : \n");
++
++ /*
++ * disable all interrupts, disable the port
++ */
++ UART_PUT_IER(port, 0x0);
++
++ /* disable break condition and fifos */
++// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
++
++ /*
++ * Free the interrupt
++ */
++ free_irq(port->irq, port);
++}
++
++static const char *sl2312_type(struct uart_port *port)
++{
++ return port->type == PORT_SL2312 ? "SL2312" : NULL;
++}
++
++/*
++ * Release the memory region(s) being used by 'port'
++ */
++static void sl2312_release_port(struct uart_port *port)
++{
++// printk("sl2312 release port : \n");
++
++ release_mem_region(port->mapbase, UART_PORT_SIZE);
++}
++
++/*
++ * Request the memory region(s) being used by 'port'
++ */
++static int sl2312_request_port(struct uart_port *port)
++{
++ return request_mem_region(port->mapbase, UART_PORT_SIZE,
++ "serial_sl2312") != NULL ? 0 : -EBUSY;
++}
++
++/*
++ * Configure/autoconfigure the port.
++ */
++static void sl2312_config_port(struct uart_port *port, int flags)
++{
++
++ if (flags & UART_CONFIG_TYPE) {
++ if (sl2312_request_port(port) == 0)
++ port->type = PORT_SL2312;
++ }
++}
++
++/*
++ * verify the new serial_struct (for TIOCSSERIAL).
++ */
++static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser)
++{
++ int ret = 0;
++
++ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
++ ret = -EINVAL;
++ if (ser->irq < 0 || ser->irq >= NR_IRQS)
++ ret = -EINVAL;
++ if (ser->baud_base < 9600)
++ ret = -EINVAL;
++ return ret;
++}
++
++static struct uart_ops sl2312_pops = {
++ .tx_empty =sl2312_tx_empty,
++ .set_mctrl =sl2312_set_mctrl_null,
++ .get_mctrl =sl2312_get_mctrl,
++ .stop_tx =sl2312_stop_tx,
++ .start_tx =sl2312_start_tx,
++ .stop_rx =sl2312_stop_rx,
++ .enable_ms =sl2312_enable_ms,
++ .break_ctl =sl2312_break_ctl,
++ .startup =sl2312_startup,
++ .shutdown =sl2312_shutdown,
++ .set_termios =sl2312_set_termios,
++ .type =sl2312_type,
++ .release_port =sl2312_release_port,
++ .request_port =sl2312_request_port,
++ .config_port =sl2312_config_port,
++ .verify_port =sl2312_verify_port,
++};
++
++#ifdef CONFIG_ARCH_SL2312
++
++static struct uart_port sl2312_ports[UART_NR] = {
++ {
++ membase: (void *)IO_ADDRESS(SL2312_UART_BASE),
++ mapbase: SL2312_UART_BASE,
++ iotype: SERIAL_IO_MEM,
++ irq: IRQ_UART,
++ uartclk: UART_CLK,
++ fifosize: 16,
++ ops: &sl2312_pops,
++ flags: ASYNC_BOOT_AUTOCONF,
++ }
++};
++
++#endif
++
++#ifdef CONFIG_SERIAL_SL2312_CONSOLE
++#ifdef used_and_not_const_char_pointer
++static int sl2312_console_read(struct uart_port *port, char *s, u_int count)
++{
++ unsigned int status;
++ int c;
++#ifdef DEBUG
++ printk("sl2312_console_read() called\n");
++#endif
++
++ c = 0;
++ while (c < count) {
++ status = UART_GET_LSR(port);
++ if (UART_RX_DATA(status)) {
++ *s++ = UART_GET_CHAR(port);
++ c++;
++ } else {
++ // nothing more to get, return
++ return c;
++ }
++ }
++ // return the count
++ return c;
++}
++#endif
++static void sl2312_console_write(struct console *co, const char *s, unsigned count)
++{
++#ifdef CONFIG_ARCH_SL2312
++ struct uart_port *port = sl2312_ports + co->index;
++ unsigned int status, old_ies;
++ int i;
++
++ /*
++ * First save the CR then disable the interrupts
++ */
++ old_ies = UART_GET_IER(port);
++ UART_PUT_IER(port,0x0);
++
++ /*
++ * Now, do each character
++ */
++ for (i = 0; i < count; i++) {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, s[i]);
++ if (s[i] == '\n') {
++ do {
++ status = UART_GET_LSR(port);
++ } while (!UART_TX_READY(status));
++ UART_PUT_CHAR(port, '\r');
++ }
++ }
++
++ /*
++ * Finally, wait for transmitter to become empty
++ * and restore the IES
++ */
++ do {
++ status = UART_GET_LSR(port);
++ } while (!(status&UART_LSR_TE));
++ UART_PUT_IER(port, old_ies);
++#endif
++}
++
++#if 0
++static void sl2312_console_device(struct console *co,int *index)
++{
++
++ struct uart_driver *p = co->data;
++ *index = co->index;
++ return p->tty_driver;
++
++}
++#endif
++
++static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
++{
++// printk("sl2312 console get options : \n");
++
++ u_int uart_mc, quot;
++ uart_mc= UART_GET_MCR(port);
++
++ *parity = 'n';
++ if (uart_mc & UART_LCR_PE) {
++ if (uart_mc & UART_LCR_EVEN)
++ *parity = 'e';
++ else
++ *parity = 'o';
++ }
++
++ switch (uart_mc & UART_LCR_MSK){
++
++ case UART_LCR_LEN5:
++ *bits = 5;
++ break;
++ case UART_LCR_LEN6:
++ *bits = 6;
++ break;
++ case UART_LCR_LEN7:
++ *bits = 7;
++ break;
++ case UART_LCR_LEN8:
++ *bits = 8;
++ break;
++ }
++ UART_PUT_MCR(port,UART_LCR_DLAB);
++ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
++ UART_PUT_MCR(port,uart_mc);
++ *baud = port->uartclk / (16 *quot );
++}
++
++static int __init sl2312_console_setup(struct console *co, char *options)
++{
++ struct uart_port *port;
++ int baud = 19200;
++ int bits = 8;
++ int parity = 'n';
++ int flow= 'n';
++
++ printk("sl2312 console setup : \n");
++
++#ifdef CONFIG_ARCH_SL2312
++ /*
++ * Check whether an invalid uart number has been specified, and
++ * if so, search for the first available port that does have
++ * console support.
++ */
++ port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co);
++#else
++ return -ENODEV;
++#endif
++
++ if (options)
++ uart_parse_options(options, &baud, &parity, &bits, &flow);
++ else
++ sl2312_console_get_options(port, &baud, &parity, &bits);
++
++ return uart_set_options(port, co, baud, parity, bits, flow);
++}
++
++extern struct uart_driver sl2312_reg;
++static struct console sl2312_console = {
++ .name = SERIAL_SL2312_NAME,
++ .write = sl2312_console_write,
++ .device = uart_console_device,
++// .device = sl2312_console_device,
++ .setup = sl2312_console_setup,
++// .flags = (CON_PRINTBUFFER|CON_ENABLED),
++ .flags = CON_PRINTBUFFER,
++ .index = -1,
++ .data = &sl2312_reg,
++};
++
++static int __init sl2312_console_init(void)
++{
++ register_console(&sl2312_console);
++ return 0;
++
++}
++
++console_initcall(sl2312_console_init);
++
++#define SL2312_CONSOLE &sl2312_console
++#else
++#define SL2312_CONSOLE NULL
++#endif
++
++// static
++struct uart_driver sl2312_reg = {
++ .owner = NULL,
++ .driver_name = SERIAL_SL2312_NAME,
++ .dev_name = SERIAL_SL2312_NAME,
++ .major = SERIAL_SL2312_MAJOR,
++ .minor = SERIAL_SL2312_MINOR,
++ .nr = UART_NR,
++ .cons = SL2312_CONSOLE,
++};
++
++static int __init sl2312_init(void)
++{
++ int result;
++ //printk("serial_it8712: it871212_init \n");
++
++ result = uart_register_driver(&sl2312_reg);
++ if(result)
++ return result;
++ result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]);
++
++ return result;
++}
++
++
++__initcall(sl2312_init);
+Index: linux-2.6.23.16/include/linux/serial_core.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/serial_core.h 2008-03-15 17:59:22.566564448 +0200
++++ linux-2.6.23.16/include/linux/serial_core.h 2008-03-15 17:59:53.568330991 +0200
+@@ -147,6 +147,10 @@
+ #define PORT_SB1250_DUART 77
+
+
++/* Storlink Soc */
++#define PORT_SL2312 72
++#define PORT_IT8712 73
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
+Index: linux-2.6.23.16/drivers/char/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:59:22.566564448 +0200
++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-17 12:19:43.252524398 +0200
+@@ -70,6 +70,16 @@
+ obj-$(CONFIG_APPLICOM) += applicom.o
+ obj-$(CONFIG_SONYPI) += sonypi.o
+ obj-$(CONFIG_RTC) += rtc.o
++
++### for Storlink SoC ###
++obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o
++obj-$(CONFIG_IT8712_GPIO) += it8712_gpio.o
++obj-$(CONFIG_GEMINI_GPIO) += gemini_gpio.o
++obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o
++obj-$(CONFIG_GEMINI_CIR) += gemini_cir.o
++obj-$(CONFIG_GEMINI_I2S) += gemini_i2s.o
++obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o
++
+ obj-$(CONFIG_HPET) += hpet.o
+ obj-$(CONFIG_GEN_RTC) += genrtc.o
+ obj-$(CONFIG_EFI_RTC) += efirtc.o
+Index: linux-2.6.23.16/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/serial/Kconfig 2008-03-15 17:59:22.566564448 +0200
++++ linux-2.6.23.16/drivers/serial/Kconfig 2008-03-15 17:59:53.568330991 +0200
+@@ -280,6 +280,56 @@
+
+ comment "Non-8250 serial port support"
+
++config SERIAL_SL2312
++ bool "SL2312 serial port (sl2312) support"
++ depends on ARCH_SL2312
++ select SERIAL_CORE
++ select SERIAL_SL2312_CONSOLE
++ help
++ Say Y here if you want to use the hard logic uart on SWORD. This
++ driver also supports soft logic implentations of this uart core.
++
++config SERIAL_SL2312_CONSOLE
++ bool "Support for console on SL2312 serial port"
++ depends on SERIAL_SL2312
++ select SERIAL_CORE_CONSOLE
++ help
++ Say Y here if you want to support a serial console on an SWORD
++ hard logic uart or uart00 IP core.
++
++ Even if you say Y here, the currently visible virtual console
++ (/dev/tty0) will still be used as the system console by default, but
++ you can alter that using a kernel command line option such as
++ "console=ttySL0". (Try "man bootparam" or see the documentation of
++ your boot loader (lilo or loadlin) about how to pass options to the
++ kernel at boot time.)
++
++
++config SERIAL_IT8712
++ bool "Sl2312 serial port(IT8712) support"
++ depends on ARM && ARCH_SL2312 && SL2312_LPC
++ select SERIAL_CORE
++ select SERIAL_IT8712_CONSOLE
++ help
++ Say Y here if you want to use the hard logic uart on Excalibur. This
++ driver also supports soft logic implentations of this uart core.
++
++config SERIAL_IT8712_CONSOLE
++ bool "Support for console on Sword serial port(IT8712)"
++ depends on SERIAL_IT8712
++ select SERIAL_CORE_CONSOLE
++ help
++ Say Y here if you want to support a serial console on an Excalibur
++ hard logic uart or uart00 IP core.
++
++ Even if you say Y here, the currently visible virtual console
++ (/dev/tty0) will still be used as the system console by default, but
++ you can alter that using a kernel command line option such as
++ "console=ttySI0". (Try "man bootparam" or see the documentation of
++ your boot loader (lilo or loadlin) about how to pass options to the
++ kernel at boot time.)
++
++
+ config SERIAL_AMBA_PL010
+ tristate "ARM AMBA PL010 serial port support"
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
+Index: linux-2.6.23.16/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/serial/Makefile 2008-03-15 17:59:22.566564448 +0200
++++ linux-2.6.23.16/drivers/serial/Makefile 2008-03-15 17:59:53.568330991 +0200
+@@ -62,5 +62,7 @@
+ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
+ obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
+ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
++obj-$(CONFIG_SERIAL_IT8712) += it8712.o
++obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o
+ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/target/linux/storm/patches/1100-gpio.patch b/target/linux/storm/patches/1100-gpio.patch
new file mode 100644
index 0000000000..d2ea7279b0
--- /dev/null
+++ b/target/linux/storm/patches/1100-gpio.patch
@@ -0,0 +1,390 @@
+Index: linux-2.6.23.16/drivers/char/gemini_gpio_dev.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/char/gemini_gpio_dev.c 2008-03-15 17:05:28.382258620 +0200
+@@ -0,0 +1,356 @@
++/*
++ * GPIO driver for Gemini board
++ * Provides /dev/gpio
++ */
++
++#include <linux/version.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/proc_fs.h>
++#include <linux/fcntl.h>
++#include <linux/miscdevice.h>
++#include <asm/uaccess.h> /* copy_to_user, copy_from_user */
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/arch/sl2312.h>
++#include <asm/arch/irqs.h>
++#include <asm/arch/gemini_gpio.h>
++
++#define GEMINI_GPIO_BASE1 IO_ADDRESS(SL2312_GPIO_BASE)
++#define GEMINI_GPIO_BASE2 IO_ADDRESS(SL2312_GPIO_BASE1)
++
++#define GPIO_SET 2
++#define MAX_GPIO_LINE 32*GPIO_SET
++
++wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE];
++
++enum GPIO_REG
++{
++ GPIO_DATA_OUT = 0x00,
++ GPIO_DATA_IN = 0x04,
++ GPIO_PIN_DIR = 0x08,
++ GPIO_BY_PASS = 0x0C,
++ GPIO_DATA_SET = 0x10,
++ GPIO_DATA_CLEAR = 0x14,
++ GPIO_PULL_ENABLE = 0x18,
++ GPIO_PULL_TYPE = 0x1C,
++ GPIO_INT_ENABLE = 0x20,
++ GPIO_INT_RAW_STATUS = 0x24,
++ GPIO_INT_MASK_STATUS = 0x28,
++ GPIO_INT_MASK = 0x2C,
++ GPIO_INT_CLEAR = 0x30,
++ GPIO_INT_TRIG = 0x34,
++ GPIO_INT_BOTH = 0x38,
++ GPIO_INT_POLAR = 0x3C
++};
++
++unsigned int regist_gpio_int0=0,regist_gpio_int1=0;
++
++/* defines a specific GPIO bit number and state */
++struct gpio_bit {
++ unsigned char bit;
++ unsigned char state;
++};
++
++#define GPIO_MAJOR 10
++#define GPIO_MINOR 127
++
++/*
++ * ioctl calls that are permitted to the /dev/gpio interface
++ */
++#define GPIO_GET_BIT 0x0000001
++#define GPIO_SET_BIT 0x0000002
++#define GPIO_GET_CONFIG 0x0000003
++#define GPIO_SET_CONFIG 0x0000004
++
++//#define GPIO_CONFIG_OUT 1
++//#define GPIO_CONFIG_IN 2
++
++
++
++#define DEVICE_NAME "gpio"
++
++//#define DEBUG
++
++/*
++ * GPIO interface
++ */
++
++/* /dev/gpio */
++static int gpio_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg);
++
++/* /proc/driver/gpio */
++static int gpio_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data);
++
++static unsigned char gpio_status; /* bitmapped status byte. */
++
++/* functions for set/get gpio lines on storlink cpu */
++
++void gpio_line_get(unsigned char pin, u32 * data)
++{
++ unsigned int set = pin >>5; // each GPIO set has 32 pins
++ unsigned int status,addr;
++
++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN;
++ status = readl(addr);
++#ifdef DEBUG
++ printk("status = %08X, pin = %d, set = %d\n", status, pin, set);
++#endif
++ if (set)
++ *data = (status&(1<<(pin-32)))?1:0;
++ else
++ *data = (status&(1<<pin))?1:0;
++}
++
++void gpio_line_set(unsigned char pin, u32 high)
++{
++ unsigned char set = pin >>5; // each GPIO set has 32 pins
++ unsigned int status=0,addr;
++
++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR);
++
++ status &= ~(1 << (pin %32));
++ status |= (1 << (pin % 32));
++ writel(status,addr);
++}
++
++/*
++ * pin = [0..63]
++ * mode =
++ * 1 -- OUT
++ * 2 -- IN
++ */
++void gpio_line_config(unsigned char pin, unsigned char mode)
++{
++ unsigned char set = pin >>5; // each GPIO set has 32 pins
++ unsigned int status,addr;
++
++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR;
++ status = readl(addr);
++
++ status &= ~(1 << (pin %32));
++ if (mode == 1)
++ status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */
++
++ writel(status,addr);
++#if 0
++ /* enable pullup-high if mode is input */
++
++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE;
++ status = readl(addr);
++
++ status &= ~(1 << (pin %32));
++ if (mode == 2) /* input */
++ status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */
++
++ writel(status,addr);
++
++ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE;
++ status = readl(addr);
++
++ status &= ~(1 << (pin %32));
++ if (mode == 2) /* input */
++ status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */
++
++ writel(status,addr);
++#endif
++}
++
++#define GPIO_IS_OPEN 0x01 /* means /dev/gpio is in use */
++
++/*
++ * Now all the various file operations that we export.
++ */
++static int gpio_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ struct gpio_bit bit;
++ u32 val;
++
++ if (copy_from_user(&bit, (struct gpio_bit *)arg,
++ sizeof(bit)))
++ return -EFAULT;
++
++ switch (cmd) {
++
++ case GPIO_GET_BIT:
++ gpio_line_get(bit.bit, &val);
++ bit.state = val;
++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
++ case GPIO_SET_BIT:
++ val = bit.state;
++ gpio_line_set(bit.bit, val);
++ return 0;
++ case GPIO_GET_CONFIG:
++ // gpio_line_config(bit.bit, bit.state);
++ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
++ case GPIO_SET_CONFIG:
++ val = bit.state;
++ gpio_line_config(bit.bit, bit.state);
++ return 0;
++ }
++ return -EINVAL;
++}
++
++
++static int gpio_open(struct inode *inode, struct file *file)
++{
++ if (gpio_status & GPIO_IS_OPEN)
++ return -EBUSY;
++
++ gpio_status |= GPIO_IS_OPEN;
++ return 0;
++}
++
++
++static int gpio_release(struct inode *inode, struct file *file)
++{
++ /*
++ * Turn off all interrupts once the device is no longer
++ * in use and clear the data.
++ */
++
++ gpio_status &= ~GPIO_IS_OPEN;
++ return 0;
++}
++
++
++/*
++ * The various file operations we support.
++ */
++
++static struct file_operations gpio_fops = {
++ .owner = THIS_MODULE,
++ .ioctl = gpio_ioctl,
++ .open = gpio_open,
++ .release = gpio_release,
++};
++
++static struct miscdevice gpio_dev =
++{
++ .minor = GPIO_MINOR,
++ .name = "gpio",
++ .fops = &gpio_fops,
++};
++
++
++
++
++#ifdef CONFIG_PROC_FS
++static struct proc_dir_entry *dir;
++
++/*
++ * Info exported via "/proc/driver/gpio".
++ */
++static int gpio_get_status(char *buf)
++{
++ char *p = buf;
++ u32 val = 0;
++ int i;
++ int bit;
++#ifdef DEBUG
++ u32 addr;
++
++ for (i = 0; i < 0x20; i+=4 ) {
++ addr = IO_ADDRESS(SL2312_GPIO_BASE) + i;
++ val = readl(addr);
++ p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val );
++ }
++ for (i = 0; i < 0x20; i+=4 ) {
++ addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i;
++ val = readl(addr);
++ p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val );
++ }
++#endif
++
++ for (i = 0; i < 32; i++) {
++ gpio_line_get(i, &bit);
++ if (bit)
++ val |= (1 << i);
++ }
++ p += sprintf(p, "gpio0\t: 0x%08x\n", val);
++
++ val = 0;
++ for (i = 32; i < 64; i++) {
++ gpio_line_get(i, &bit);
++ if (bit)
++ val |= (1 << i);
++ }
++ p += sprintf(p, "gpio1\t: 0x%08x\n", val);
++
++ return p - buf;
++}
++
++
++/* /proc/driver/gpio read op
++ */
++static int gpio_read_proc(char *page, char **start, off_t off,
++ int count, int *eof, void *data)
++{
++ int len = gpio_get_status (page);
++
++ if (len <= off+count)
++ *eof = 1;
++ *start = page + off;
++ len -= off;
++ if ( len > count )
++ len = count;
++ if ( len < 0 )
++ len = 0;
++ return len;
++}
++#endif /* CONFIG_PROC_FS */
++
++
++static int __init gpio_init_module(void)
++{
++ int retval;
++#ifdef CONFIG_PROC_FS
++ struct proc_dir_entry *res;
++#endif
++
++ /* register /dev/gpio file ops */
++ //retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops);
++ retval = misc_register(&gpio_dev);
++ if(retval < 0)
++ return retval;
++
++#ifdef CONFIG_PROC_FS
++ dir = proc_mkdir("driver/gpio", NULL);
++ if (!dir) {
++ misc_deregister(&gpio_dev);
++ return -ENOMEM;
++ }
++ /* register /proc/driver/gpio */
++ res = create_proc_entry("info", 0644, dir);
++ if (res) {
++ res->read_proc= gpio_read_proc;
++ } else {
++ misc_deregister(&gpio_dev);
++ return -ENOMEM;
++ }
++#endif
++
++ printk("%s: GPIO driver loaded\n", __FILE__);
++
++ return 0;
++}
++
++static void __exit gpio_cleanup_module(void)
++{
++ remove_proc_entry ("info", dir);
++ misc_deregister(&gpio_dev);
++
++ printk("%s: GPIO driver unloaded\n", __FILE__);
++}
++
++module_init(gpio_init_module);
++module_exit(gpio_cleanup_module);
++
++MODULE_AUTHOR("Jonas Majauskas");
++MODULE_LICENSE("GPL");
++
+Index: linux-2.6.23.16/drivers/char/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/char/Kconfig 2008-03-13 17:45:54.000221290 +0200
++++ linux-2.6.23.16/drivers/char/Kconfig 2008-03-15 17:05:09.381175866 +0200
+@@ -1064,5 +1064,12 @@
+
+ source "drivers/s390/char/Kconfig"
+
++config GEMINI_GPIO_DEV
++ tristate "GPIO driver for Gemini board (provides /dev/gpio)"
++ depends on ARCH_SL2312
++ default n
++ help
++ GPIO driver for Gemini boards - SL3512, SL3516.
++
+ endmenu
+
+Index: linux-2.6.23.16/drivers/char/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/char/Makefile 2008-03-15 17:04:35.879266660 +0200
++++ linux-2.6.23.16/drivers/char/Makefile 2008-03-15 17:05:09.381175866 +0200
+@@ -115,6 +115,7 @@
+
+ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
+ obj-$(CONFIG_TCG_TPM) += tpm/
++obj-$(CONFIG_GEMINI_GPIO_DEV) += gemini_gpio_dev.o
+
+ obj-$(CONFIG_PS3_FLASH) += ps3flash.o
+
diff --git a/toolchain/Config.in b/toolchain/Config.in
index c73e092909..a6b0683498 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -85,6 +85,7 @@ config TARGET_OPTIMIZATION
default "-Os -pipe -march=i486 -funit-at-a-time" if TARGET_rdc
default "-Os -pipe -mips32 -mtune=mips32 -funit-at-a-time" if mipsel || mips
default "-Os -pipe -march=armv5te -mtune=xscale -funit-at-a-time" if TARGET_ixp4xx || TARGET_iop32x || TARGET_pxa
+ default "-Os -pipe -march=armv4t -mtune=arm9tdmi -funit-at-a-time" if TARGET_storm
default "-Os -pipe -funit-at-a-time"
help
Optimizations to use when building for the target host.
diff --git a/toolchain/uClibc/config/arm.storm b/toolchain/uClibc/config/arm.storm
new file mode 100644
index 0000000000..ee109d7851
--- /dev/null
+++ b/toolchain/uClibc/config/arm.storm
@@ -0,0 +1,210 @@
+#
+# Automatically generated make config: don't edit
+#
+# TARGET_alpha is not set
+TARGET_arm=y
+# TARGET_avr32 is not set
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+# TARGET_hppa is not set
+# TARGET_i386 is not set
+# TARGET_i960 is not set
+# TARGET_ia64 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_vax is not set
+# TARGET_x86_64 is not set
+
+#
+# Target Architecture Features and Options
+#
+TARGET_ARCH="arm"
+FORCE_OPTIONS_FOR_ARCH=y
+# CONFIG_ARM_OABI is not set
+CONFIG_ARM_EABI=y
+USE_BX=y
+# CONFIG_GENERIC_ARM is not set
+# CONFIG_ARM610 is not set
+# CONFIG_ARM710 is not set
+# CONFIG_ARM7TDMI is not set
+# CONFIG_ARM720T is not set
+CONFIG_ARM920T=y
+# CONFIG_ARM922T is not set
+# CONFIG_ARM926T is not set
+# CONFIG_ARM10T is not set
+# CONFIG_ARM1136JF_S is not set
+# CONFIG_ARM1176JZ_S is not set
+# CONFIG_ARM1176JZF_S is not set
+# CONFIG_ARM_SA110 is not set
+# CONFIG_ARM_SA1100 is not set
+# CONFIG_ARM_XSCALE is not set
+# CONFIG_ARM_IWMMXT is not set
+ARCH_ANY_ENDIAN=y
+# ARCH_WANTS_BIG_ENDIAN is not set
+ARCH_WANTS_LITTLE_ENDIAN=y
+ARCH_HAS_MMU=y
+ARCH_USE_MMU=y
+UCLIBC_HAS_FLOATS=y
+UCLIBC_HAS_FPU=y
+UCLIBC_HAS_SOFT_FLOAT=y
+DO_C99_MATH=y
+KERNEL_SOURCE="./toolchain_build_arm/linux"
+KERNEL_HEADERS="./toolchain_build_arm/linux/include"
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# HAVE_NO_SHARED is not set
+HAVE_SHARED=y
+# ARCH_HAS_NO_LDSO is not set
+BUILD_UCLIBC_LDSO=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+LDSO_RUNPATH=y
+# DL_FINI_CRT_COMPAT is not set
+UCLIBC_CTOR_DTOR=y
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+# PTHREADS_DEBUG_SUPPORT is not set
+UCLIBC_HAS_LFS=y
+LINUXTHREADS_OLD=y
+# UCLIBC_STATIC_LDCONFIG is not set
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+COMPAT_ATEXIT=y
+# UCLIBC_SUSV3_LEGACY is not set
+UCLIBC_SUSV3_LEGACY_MACROS=y
+UCLIBC_HAS_SHADOW=y
+UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
+UCLIBC_HAS___PROGNAME=y
+# UNIX98PTY_ONLY is not set
+ASSUME_DEVPTS=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Advanced Library Settings
+#
+UCLIBC_PWD_BUFFER_SIZE=256
+UCLIBC_GRP_BUFFER_SIZE=256
+
+#
+# Networking Support
+#
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+# UCLIBC_HAS_REENTRANT_RPC is not set
+# UCLIBC_USE_NETLINK is not set
+UCLIBC_HAS_BSD_RES_CLOSE=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+UCLIBC_HAS_GNU_GETSUBOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+UCLIBC_HAS_REGEX_OLD=y
+UCLIBC_HAS_FNMATCH=y
+UCLIBC_HAS_FNMATCH_OLD=y
+UCLIBC_HAS_WORDEXP=y
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+UCLIBC_HAS_GNU_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# Security options
+#
+# UCLIBC_BUILD_PIE is not set
+# UCLIBC_HAS_ARC4RANDOM is not set
+# HAVE_NO_SSP is not set
+# UCLIBC_HAS_SSP is not set
+UCLIBC_BUILD_RELRO=y
+# UCLIBC_BUILD_NOW is not set
+UCLIBC_BUILD_NOEXECSTACK=y
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX=""
+UCLIBC_EXTRA_CFLAGS=""
+# DODEBUG is not set
+# DODEBUG_PT is not set
+DOSTRIP=y
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+# UCLIBC_MALLOC_DEBUGGING is not set
+WARNINGS="-Wall"
+# EXTRA_WARNINGS is not set
+# DOMULTI is not set
+# UCLIBC_MJN3_ONLY is not set