aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network3
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig5
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c126
-rw-r--r--target/linux/ramips/image/Makefile11
-rw-r--r--target/linux/ramips/rt305x/config-2.6.391
11 files changed, 155 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index ac97d037c1..ace012acc7 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -64,7 +64,8 @@ case "$FIRMWARE" in
whr-g300n | \
wl-351 | \
wli-tx4-ag300n | \
- wr512-3gn)
+ wr512-3gn | \
+ wr6202)
rt2x00_eeprom_extract "factory" 0 272
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 65c49e0ebb..174383405a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -23,7 +23,8 @@ ramips_setup_interfaces()
argus-atp52b | \
b2c | \
nw718 | \
- w502u)
+ w502u | \
+ wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index f6884c8477..121b471f4f 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -25,7 +25,8 @@ preinit_set_mac_address() {
hw550-3g |\
nbg-419n |\
omni-emb |\
- w502u)
+ w502u |\
+ wr6202)
mac=$(ramips_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index b3c54e82db..5204820fb9 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -128,6 +128,9 @@ ramips_board_name() {
*"WR512-3GN-like router")
name="wr512-3gn"
;;
+ *"AWB WR6202")
+ name="wr6202"
+ ;;
*)
name="generic"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 494e774ef9..2751fdda29 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -29,6 +29,7 @@ platform_check_image() {
rt-g32-b1 | \
rt-n15 | \
w502u |\
+ wr6202 |\
v22rw-2x2 | \
wl341v3 | \
wli-tx4-ag300n | \
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index bec6ff0bec..600e8bf905 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -45,4 +45,5 @@ enum ramips_mach_type {
RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */
RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */
RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/
+ RAMIPS_MACH_WR6202, /* Accton WR6202 */
};
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
index 826a484fe9..550287e34f 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig
@@ -2,6 +2,11 @@ if RALINK_RT305X
menu "Ralink RT350x machine selection"
+config RT305X_MACH_WR6202
+ bool "Accton WR6202"
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT305X_MACH_ALL0256N
bool "Allnet ALL0256N support"
select RALINK_DEV_GPIO_BUTTONS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
index 743493e80b..da1952c0ee 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o
obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o
obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o
obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o
+obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
new file mode 100644
index 0000000000..64ea20113c
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c
@@ -0,0 +1,126 @@
+/*
+ * AWB WR6202 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<linux/init.h>
+#include<linux/platform_device.h>
+#include<linux/mtd/mtd.h>
+#include<linux/mtd/partitions.h>
+#include<linux/mtd/physmap.h>
+#include<linux/gpio.h>
+
+#include<asm/mach-ralink/machine.h>
+#include<asm/mach-ralink/dev-gpio-buttons.h>
+#include<asm/mach-ralink/dev-gpio-leds.h>
+#include<asm/mach-ralink/rt305x.h>
+#include<asm/mach-ralink/rt305x_regs.h>
+
+#include "devices.h"
+
+#define WR6202_GPIO_BUTTON_RESET 10 /* active low */
+#define WR6202_GPIO_BUTTON_WPS 0 /* active low */
+
+#define WR6202_BUTTONS_POLL_INTERVAL 20
+
+#define WR6202_GPIO_USB_POWER 11
+
+#define WR6202_GPIO_LED_3G 13
+#define WR6202_GPIO_LED_WPS 14
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wr6202_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ }, {
+ .name = "uboot-config",
+ .offset = 0x030000,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x040000,
+ .size = 0x050000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x050000,
+ .size = 0x100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x6B0000,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wr6202_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(wr6202_partitions),
+ .parts = wr6202_partitions,
+#endif
+};
+
+static struct gpio_led wr6202_leds_gpio[] __initdata = {
+ {
+ .name = "wr6202:blue:wps",
+ .gpio = WR6202_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "wr6202:blue:3g",
+ .gpio = WR6202_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button wr6202_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = WR6202_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = WR6202_GPIO_BUTTON_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init wr6202_init(void)
+{
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+
+ rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio),
+ wr6202_leds_gpio);
+ ramips_register_gpio_buttons(-1, WR6202_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(wr6202_gpio_buttons),
+ wr6202_gpio_buttons);
+
+ /* Power to the USB port is controlled by GPIO line */
+ gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER");
+ gpio_direction_output(WR6202_GPIO_USB_POWER, 0);
+ gpio_free(WR6202_GPIO_USB_POWER);
+
+ rt305x_register_flash(0, &wr6202_flash_data);
+ rt305x_register_ethernet();
+ rt305x_register_wifi();
+ rt305x_register_wdt();
+ rt305x_register_usb();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202",
+ wr6202_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 745edefbae..76f14ca41b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -167,6 +167,16 @@ define Image/Build/Template/NW718
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
+console_WR6202=ttyS1,115200
+mtdlayout_WR6202=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
+define Image/Build/Template/WR6202
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_WR6202),mtdlayout_WR6202,1048576,7012352)
+endef
+
+define Image/Build/Profile/WR6202
+ $(call Image/Build/Template/WR6202,$(1),wr6202,WR6202)
+endef
+
console_OMNIEMB=ttyS1,57600
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
define Image/Build/Template/OMNIEMB
@@ -328,6 +338,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WR5123GN,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL351,$(1))
+ $(call Image/Build/Profile/WR6202,$(1))
endef
endif
diff --git a/target/linux/ramips/rt305x/config-2.6.39 b/target/linux/ramips/rt305x/config-2.6.39
index e9ef379c07..0aa7670a8b 100644
--- a/target/linux/ramips/rt305x/config-2.6.39
+++ b/target/linux/ramips/rt305x/config-2.6.39
@@ -112,6 +112,7 @@ CONFIG_RT305X_MACH_WHR_G300N=y
CONFIG_RT305X_MACH_WL341V3=y
CONFIG_RT305X_MACH_WL351=y
CONFIG_RT305X_MACH_WR512_3GN=y
+CONFIG_RT305X_MACH_WR6202=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y