diff options
| -rw-r--r-- | target/linux/kirkwood/base-files/etc/board.d/02_network | 3 | ||||
| -rw-r--r-- | target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ix4-200d.dts | 202 | ||||
| -rw-r--r-- | target/linux/kirkwood/image/Makefile | 18 |
3 files changed, 223 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index df38694f40..15f75df6a8 100644 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -37,6 +37,9 @@ kirkwood_setup_interfaces() endian,4i-edge-200) ucidef_set_interface_lan "port1 port2 port3 port4 eth1" ;; + iom,ix4-200d) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; linksys,e4200-v2|\ linksys,ea3500|\ linksys,ea4500) diff --git a/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ix4-200d.dts b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ix4-200d.dts new file mode 100644 index 0000000000..c63742a1a8 --- /dev/null +++ b/target/linux/kirkwood/files/arch/arm/boot/dts/kirkwood-ix4-200d.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Iomega ix4-200d"; + compatible = "iom,ix4-200d", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + aliases { + led-boot = &led_status_white; + led-failsafe = &led_status_red; + led-running = &led_power_white; + led-upgrade = &led_status_red; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + adt7473@2e { + compatible = "adi,adt7473"; + reg = <0x2e>; + }; + }; + + pinctrl: pin-controller@10000 { + pmx_spi: pmx-spi { + marvell,pins = "mpp12", "mpp13", "mpp14"; + marvell,function = "gpio"; + }; + + pmx_keys: pmx-keys { + marvell,pins = "mpp16", "mpp29", "mpp47", "mpp49"; + marvell,function = "gpio"; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + serial@12000 { + status = "okay"; + }; + + spi3 { + compatible = "spi-gpio"; + #address-cells = <0x1>; + ranges; + status = "okay"; + sck-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + mosi-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + #size-cells = <0>; + + gpio_spi: gpio_spi@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_keys>; + pinctrl-names = "default"; + + button-0 { + label = "Next Button"; + linux,code = <BTN_0>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + button-1 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + + button-2 { + label = "Cancel Button"; + linux,code = <BTN_1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + button-3 { + label = "Power Button"; + linux,code = <KEY_POWER2>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_status_white: led-0 { + label = "status:white"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio_spi 4 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-1 { + label = "status:red"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; + }; + + led_power_white: led-2 { + label = "power:white"; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio_spi 7 GPIO_ACTIVE_HIGH>; + }; + }; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; + + ethphy1: ethernet-phy@9 { + reg = <9>; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "u-boot environment"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x1C00000>; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile index ea76e21970..0fa14b89f3 100644 --- a/target/linux/kirkwood/image/Makefile +++ b/target/linux/kirkwood/image/Makefile @@ -184,6 +184,24 @@ define Device/iom_ix2-200 endef TARGET_DEVICES += iom_ix2-200 +define Device/iom_ix4-200d + DEVICE_VENDOR := Iomega + DEVICE_MODEL := StorCenter ix4-200d + DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \ + kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \ + kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio + PAGESIZE := 512 + SUBPAGESIZE := 256 + BLOCKSIZE := 16k + KERNEL_SIZE := 3072k + KERNEL_IN_UBI := + UBINIZE_OPTS := -E 5 + IMAGE_SIZE := 31744k + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ + check-size +endef +TARGET_DEVICES += iom_ix4-200d + define Device/iptime_nas1 DEVICE_VENDOR := ipTIME DEVICE_MODEL := NAS1 |