aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--target/linux/ipq40xx/base-files/etc/board.d/02_network8
-rw-r--r--target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata21
-rw-r--r--target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh76
-rw-r--r--target/linux/ipq40xx/base-files/lib/upgrade/platform.sh6
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi325
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts30
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts30
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts12
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts12
-rw-r--r--target/linux/ipq40xx/image/generic.mk58
-rw-r--r--target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch12
-rw-r--r--target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch6
12 files changed, 591 insertions, 5 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index a675acc8db..50b460e441 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -106,6 +106,14 @@ ipq40xx_setup_interfaces()
"0u@eth0" "3:lan:2" "4:lan:1"
ucidef_set_interface_wan "eth1"
;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ ucidef_add_switch "switch0" \
+ "0u@eth0" "2:lan" "3:lan" "4:lan"
+ ucidef_set_interface_wan "eth1"
+ ;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 87876ad844..505182bb65 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -46,6 +46,13 @@ case "$FIRMWARE" in
# OEM assigns 4 sequential MACs
ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x9000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
+ ;;
esac
;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
@@ -150,6 +157,13 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
+ ;;
netgear,wac510)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
@@ -264,6 +278,13 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
;;
+ netgear,rbr50|\
+ netgear,rbs50|\
+ netgear,srr60|\
+ netgear,srs60)
+ caldata_extract_mmc "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
+ ;;
netgear,wac510)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh b/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh
new file mode 100644
index 0000000000..f3fb626d1f
--- /dev/null
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/netgear.sh
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only
+. /lib/functions.sh
+
+platform_do_upgrade_netgear_orbi_upgrade() {
+ command -v losetup >/dev/null || {
+ logger -s "Upgrade failed: 'losetup' not installed."
+ return 1
+ }
+
+ local tar_file=$1
+ local kernel=$2
+ local rootfs=$3
+
+ [ -z "$kernel" ] && kernel=$(find_mmc_part "kernel")
+ [ -z "$rootfs" ] && rootfs=$(find_mmc_part "rootfs")
+
+ [ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
+ [ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
+
+ netgear_orbi_do_flash $tar_file $kernel $rootfs
+
+ echo "sysupgrade successful"
+ umount -a
+ reboot -f
+}
+
+netgear_orbi_do_flash() {
+ local tar_file=$1
+ local kernel=$2
+ local rootfs=$3
+
+ # keep sure its unbound
+ losetup --detach-all || {
+ echo "Failed to detach all loop devices. Skip this try."
+ reboot -f
+ }
+
+ # use the first found directory in the tar archive
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ echo "flashing kernel to $kernel"
+ tar xf $tar_file ${board_dir}/kernel -O >$kernel
+
+ echo "flashing rootfs to ${rootfs}"
+ tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
+
+ # a padded rootfs is needed for overlay fs creation
+ local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+ [ $offset -lt 65536 ] && {
+ echo "Wrong size for rootfs: $offset"
+ sleep 10
+ reboot -f
+ }
+
+ # Mount loop for rootfs_data
+ local loopdev="$(losetup -f)"
+ losetup -o $offset $loopdev $rootfs || {
+ echo "Failed to mount looped rootfs_data."
+ sleep 10
+ reboot -f
+ }
+
+ echo "Format new rootfs_data at position ${offset}."
+ mkfs.ext4 -F -L rootfs_data $loopdev
+ mkdir /tmp/new_root
+ mount -t ext4 $loopdev /tmp/new_root && {
+ echo "Saving config to rootfs_data at position ${offset}."
+ cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+ umount /tmp/new_root
+ }
+
+ # Cleanup
+ losetup -d $loopdev >/dev/null 2>&1
+ sync
+}
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 68027be666..e391976606 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -117,6 +117,12 @@ platform_do_upgrade() {
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
+ netgear,rbr50 |\
+ netgear,rbs50 |\
+ netgear,srr60 |\
+ netgear,srs60)
+ platform_do_upgrade_netgear_orbi_upgrade "$1"
+ ;;
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
new file mode 100644
index 0000000000..bdbee7f837
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-orbi.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ aliases {
+ led-boot = &led_status_white;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_blue;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ status = "okay";
+
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+
+ switch_lan_bmp = <0x1c>;
+ switch_wan_bmp = <0x02>;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "green:power";
+ gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-1 {
+ label = "red:power";
+ gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led_status_green: led-2 {
+ label = "green:status";
+ gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: led-3 {
+ label = "red:status";
+ gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: led-4 {
+ label = "blue:status";
+ gpios = <&tlmm 57 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_white: led-5 {
+ label = "white:status";
+ gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&vqmmc {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+
+ pinctrl-0 = <&sd_pins>;
+ pinctrl-names = "default";
+ cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <&vqmmc>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio58", "gpio59";
+ bias-disable;
+ };
+ };
+
+ sd_pins: sd_pins {
+ pinmux {
+ function = "sdio";
+ pins = "gpio23", "gpio24", "gpio25", "gpio26",
+ "gpio28", "gpio29", "gpio30", "gpio31";
+ drive-strength = <10>;
+ };
+
+ pinmux_sd_clk {
+ function = "sdio";
+ pins = "gpio27";
+ drive-strength = <16>;
+ };
+
+ pinmux_sd7 {
+ function = "sdio";
+ pins = "gpio32";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ led-controller@27 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108"; /* really is tlc59208f */
+ reg = <0x27>;
+
+ led0@0 {
+ label = "rgb:led0";
+ reg = <0x0>;
+ linux,default-trigger = "default-on";
+ };
+
+ led1@1 {
+ label = "rgb:led1";
+ reg = <0x1>;
+ linux,default-trigger = "default-on";
+ };
+
+ led2@2 {
+ label = "rgb:led2";
+ reg = <0x2>;
+ linux,default-trigger = "default-on";
+ };
+
+ led3@3 {
+ label = "rgb:led3";
+ reg = <0x3>;
+ linux,default-trigger = "default-on";
+ };
+
+ led4@4 {
+ label = "rgb:led4";
+ reg = <0x4>;
+ linux,default-trigger = "default-on";
+ };
+
+ led5@5 {
+ label = "rgb:led5";
+ reg = <0x5>;
+ linux,default-trigger = "default-on";
+ };
+
+ led6@6 {
+ label = "rgb:led6";
+ reg = <0x6>;
+ linux,default-trigger = "default-on";
+ };
+
+ led7@7 {
+ label = "rgb:led7";
+ reg = <0x7>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ vlan_tag = <1 0x1c>;
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <0>;
+ vlan_tag = <2 0x02>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ ieee80211-freq-limit = <5470000 5875000>;
+ qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "Netgear-Orbi-Pro-SRK60";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts
new file mode 100644
index 0000000000..a803999804
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbr50.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019-orbi.dtsi"
+
+/ {
+ model = "NETGEAR RBR50";
+ compatible = "netgear,rbr50";
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
+ };
+
+ soc {
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts
new file mode 100644
index 0000000000..4d0a9132c6
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rbs50.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019-orbi.dtsi"
+
+/ {
+ model = "NETGEAR RBS50";
+ compatible = "netgear,rbs50";
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_ALT)ro,256K(0:CDT)ro,256K(0:CDT_ALT)ro,256K(0:DDRPARAMS)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_ALT)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,1457651200(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
+ };
+
+ soc {
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts
new file mode 100644
index 0000000000..80bcb2e204
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srr60.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019-orbi.dtsi"
+
+/ {
+ model = "NETGEAR SRR60";
+ compatible = "netgear,srr60";
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
+ };
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts
new file mode 100644
index 0000000000..65bb7ac397
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-srs60.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019-orbi.dtsi"
+
+/ {
+ model = "NETGEAR SRS60";
+ compatible = "netgear,srs60";
+
+ chosen {
+ bootargs = "root=/dev/mmcblk0p20 blkdevparts=mmcblk0:512K@17K(0:SBL1)ro,512K(0:BOOTCONFIG)ro,512K(0:QSEE)ro,512K(0:QSEE_1)ro,256K(0:CDT)ro,256K(0:CDT_1)ro,512K(0:BOOTCONFIG1)ro,256K(0:APPSBLENV)ro,1M(0:APPSBL)ro,1M(0:APPSBL_1)ro,256K(0:ART)ro,256K(ARTMTD)ro,2M(language)ro,256K(config)ro,256K(pot)ro,256K(traffic_meter)ro,256K(pot_bak)ro,256K(traffic_meter.bak)ro,3840K(kernel),31488K(rootfs),35328K@9233K(firmware),256K(mtdoops)ro,64K(cert)ro,3840K(kernel-2)ro,31488K(rootfs-2)ro,35328K@44881K(firmware-2)ro,5M(device_table)ro,17M(cp_file)ro,102737K(reserved)ro,-(unallocated) rootfstype=squashfs,ext4 rootwait";
+ };
+};
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index e0cfa07541..dcfe3e027c 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -646,6 +646,64 @@ define Device/netgear_ex6150v2
endef
TARGET_DEVICES += netgear_ex6150v2
+define Device/netgear_orbi
+ $(call Device/DniImage)
+ SOC := qcom-ipq4019
+ DEVICE_VENDOR := NETGEAR
+ IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
+ append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
+ append-rootfs | pad-rootfs | netgear-dni
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
+ sysupgrade-tar rootfs=$$$$@ | append-metadata
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+endef
+
+define Device/netgear_rbx50
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr50
+ $(call Device/netgear_rbx50)
+ DEVICE_MODEL := RBR50
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBR50
+endef
+TARGET_DEVICES += netgear_rbr50
+
+define Device/netgear_rbs50
+ $(call Device/netgear_rbx50)
+ DEVICE_MODEL := RBS50
+ DEVICE_VARIANT := v1
+ NETGEAR_BOARD_ID := RBS50
+endef
+TARGET_DEVICES += netgear_rbs50
+
+define Device/netgear_srx60
+ $(call Device/netgear_orbi)
+ NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
+ KERNEL_SIZE := 3932160
+ ROOTFS_SIZE := 32243712
+ IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_srr60
+ $(call Device/netgear_srx60)
+ DEVICE_MODEL := SRR60
+ NETGEAR_BOARD_ID := SRR60
+endef
+TARGET_DEVICES += netgear_srr60
+
+define Device/netgear_srs60
+ $(call Device/netgear_srx60)
+ DEVICE_MODEL := SRS60
+ NETGEAR_BOARD_ID := SRS60
+endef
+TARGET_DEVICES += netgear_srs60
+
define Device/netgear_wac510
$(call Device/FitImage)
$(call Device/UbiFit)
diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
index aef58ee50e..471fcd6498 100644
--- a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -902,11 +902,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -902,11 +902,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -47,18 +47,22 @@ Signed-off-by: John Crispin <john@phrozen.org>
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-cm520-79f.dtb \
++ qcom-ipq4019-e2600ac-c1.dtb \
++ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-ea8300.dtb \
+ qcom-ipq4019-eap2200.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
++ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-mr8300.dtb \
-+ qcom-ipq4019-e2600ac-c1.dtb \
-+ qcom-ipq4019-e2600ac-c2.dtb \
-+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-pa2200.dtb \
++ qcom-ipq4019-rbr50.dtb \
++ qcom-ipq4019-rbs50.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
++ qcom-ipq4019-srr60.dtb \
++ qcom-ipq4019-srs60.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4019-wtr-m2133hp.dtb \
diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index 0447fb6012..bb63c1c4fb 100644
--- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -58,7 +58,11 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-pa2200.dtb \
++ qcom-ipq4019-rbr50.dtb \
++ qcom-ipq4019-rbs50.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
++ qcom-ipq4019-srr60.dtb \
++ qcom-ipq4019-srs60.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4019-wtr-m2133hp.dtb \