diff options
| -rw-r--r-- | target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 55 |
1 files changed, 42 insertions, 13 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts index dee271541e..57f1acf5f1 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -50,31 +50,30 @@ }; thermal-zones { - chassis-thermal { + hdd-thermal { polling-delay = <20000>; polling-delay-passive = <2000>; - thermal-sensors = <&hdd0_temp>, <&hdd1_temp>; - coefficients = <1 1>; + thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ trips { - chassis_alert1: chassis-alert1 { + hdd_alert1: trip1 { temperature = <36000>; hysteresis = <2000>; type = "active"; }; - chassis_alert2: chassis-alert2 { - temperature = <46000>; + hdd_alert2: trip2 { + temperature = <44000>; hysteresis = <2000>; type = "active"; }; - chassis_alert3: chassis-alert3 { - temperature = <56000>; + hdd_alert3: trip3 { + temperature = <52000>; hysteresis = <2000>; type = "passive"; }; - chassis_crit: chassis-crit { - temperature = <66000>; + hdd_crit: trip4 { + temperature = <60000>; hysteresis = <2000>; type = "critical"; }; @@ -82,19 +81,48 @@ cooling-maps { map1 { - trip = <&chassis_alert1>; + trip = <&hdd_alert1>; cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; }; map2 { - trip = <&chassis_alert2>; + trip = <&hdd_alert2>; cooling-device = <&system_fan 2 2>; }; map3 { - trip = <&chassis_alert3>; + trip = <&hdd_alert3>; cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; }; }; }; + + ethphy-thermal { + polling-delay = <20000>; + polling-delay-passive = <2000>; + + thermal-sensors = <ðphy0>; + + trips { + ethphy_alert1: trip1 { + temperature = <65000>; + hysteresis = <4000>; + type = "passive"; + }; + + ethphy_crit: trip2 { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map1 { + trip = <ðphy_alert1>; + cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + }; + }; }; gpio_keys { @@ -243,6 +271,7 @@ marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */ <0x3 0x11 0x1 0x4401>, /* LED polarity */ <0x3 0x12 0x1 0x4905>; /* LED timer */ + #thermal-sensor-cells = <0>; }; }; |