aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds9
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi130
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts33
-rw-r--r--target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi130
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk11
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c41
8 files changed, 233 insertions, 125 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index ea45ce6032..be5d29d97c 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -148,6 +148,15 @@ tplink,archer-d50-v1)
ucidef_set_led_switch "wan_data" "WAN Data" "tp-link:white:internet" "switch0" "0x02" "" "tx rx"
ucidef_set_led_switch "wan_link" "WAN Link" "tp-link:white:wan" "switch0" "0x02" "" "link"
;;
+tplink,cpe220-v3)
+ ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "30" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "60" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "80" "100"
+ ;;
tplink,cpe210-v2|\
tplink,cpe210-v3)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 8f2951b9f2..b342c8b5e4 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -89,6 +89,7 @@ ath79_setup_interfaces()
;;
comfast,cf-e110n-v2|\
comfast,cf-e120a-v3|\
+ tplink,cpe220-v3|\
ubnt,nanostation-m|\
ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index 8a3312389c..e2fe3b350b 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -27,6 +27,9 @@ tplink,archer-c25-v1)
ucidef_add_gpio_switch "led_control" "LED control" "21" "0"
ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1"
;;
+tplink,cpe220-v3)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
index f86ff30fc7..cb329a9a66 100644
--- a/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
@@ -1,135 +1,15 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca9533_tplink_cpexxx.dtsi"
-#include "qca953x.dtsi"
-
-/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-boot = &system;
- led-failsafe = &system;
- led-running = &system;
- led-upgrade = &system;
- };
-
- leds {
- compatible = "gpio-leds";
-
- lan {
- label = "tp-link:green:lan";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- };
-
- link1 {
- label = "tp-link:green:link1";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- };
-
- link2 {
- label = "tp-link:green:link2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
-
- link3 {
- label = "tp-link:green:link3";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
-
- system: link4 {
- label = "tp-link:green:link4";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- reset_button {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- label = "partition-table";
- reg = <0x020000 0x10000>;
- read-only;
- };
-
- info: partition@30000 {
- label = "info";
- reg = <0x030000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x040000 0x780000>;
- compatible = "tplink,firmware";
- };
-
- config: partition@7c0000 {
- label = "config";
- reg = <0x7c0000 0x30000>;
- read-only;
- };
-
- art: partition@7f0000 {
- label = "art";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
+&leds {
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
-&eth0 {
- status = "okay";
- phy-handle = <&swphy4>;
- mtd-mac-address = <&info 0x8>;
-};
-
&eth1 {
compatible = "syscon", "simple-mfd";
};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
-};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
new file mode 100644
index 0000000000..dd90eb1c7d
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpe220-v3.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533_tplink_cpexxx.dtsi"
+
+/ {
+ compatible = "tplink,cpe220-v3", "qca,qca9533";
+ model = "TP-Link CPE220 v3";
+};
+
+&leds {
+ lan0 {
+ label = "tp-link:green:lan0";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "tp-link:green:lan1";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&info 0x8>;
+
+ gmac-config {
+ device = <&gmac>;
+ switch-phy-swap = <0>;
+ switch-only-mode = <1>;
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
new file mode 100644
index 0000000000..ae9cb24aa0
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_tplink_cpexxx.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_link4;
+ led-failsafe = &led_link4;
+ led-running = &led_link4;
+ led-upgrade = &led_link4;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ link1 {
+ label = "tp-link:green:link1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ link2 {
+ label = "tp-link:green:link2";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ link3 {
+ label = "tp-link:green:link3";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_link4: link4 {
+ label = "tp-link:green:link4";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset_button {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "partition-table";
+ reg = <0x020000 0x010000>;
+ read-only;
+ };
+
+ info: partition@30000 {
+ label = "info";
+ reg = <0x030000 0x010000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x040000 0x780000>;
+ compatible = "tplink,firmware";
+ };
+
+ config: partition@7c0000 {
+ label = "config";
+ reg = <0x7c0000 0x030000>;
+ read-only;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&info 0x8>;
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy4>;
+
+ mtd-mac-address = <&info 0x8>;
+};
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 304304799d..9b1b272a7e 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -168,6 +168,17 @@ define Device/tplink_cpe210-v3
endef
TARGET_DEVICES += tplink_cpe210-v3
+define Device/tplink_cpe220-v3
+ $(Device/tplink-safeloader)
+ ATH_SOC := qca9533
+ IMAGE_SIZE := 7680k
+ DEVICE_TITLE := TP-Link CPE220 v3
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := CPE220V3
+ LOADER_TYPE := elf
+endef
+TARGET_DEVICES += tplink_cpe220-v3
+
define Device/tplink_archer-d50-v1
ATH_SOC := qca9531
DEVICE_TITLE := TP-Link Archer D50 v1
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index a53b05c478..62bbac0c0e 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -231,6 +231,47 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "support-list",
},
+ /** Firmware layout for the CPE220 V3 */
+ {
+ .id = "CPE220V3",
+ .vendor = "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n",
+ .support_list =
+ "SupportList:\r\n"
+ "CPE220(TP-LINK|EU|N300-2|00000000):3.0\r\n"
+ "CPE220(TP-LINK|EU|N300-2|45550000):3.0\r\n"
+ "CPE220(TP-LINK|EU|N300-2|55530000):3.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2|00000000):3.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2|45550000):3.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2|55530000):3.0\r\n"
+ "CPE220(TP-LINK|US|N300-2|55530000):3.0\r\n"
+ "CPE220(TP-LINK|UN|N300-2):3.0\r\n"
+ "CPE220(TP-LINK|EU|N300-2):3.0\r\n"
+ "CPE220(TP-LINK|US|N300-2):3.0\r\n",
+ .support_trail = '\xff',
+ .soft_ver = NULL,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"partition-table", 0x20000, 0x02000},
+ {"default-mac", 0x30000, 0x00020},
+ {"product-info", 0x31100, 0x00100},
+ {"device-info", 0x31400, 0x00400},
+ {"signature", 0x32000, 0x00400},
+ {"device-id", 0x33000, 0x00100},
+ {"firmware", 0x40000, 0x770000},
+ {"soft-version", 0x7b0000, 0x00100},
+ {"support-list", 0x7b1000, 0x01000},
+ {"user-config", 0x7c0000, 0x10000},
+ {"default-config", 0x7d0000, 0x10000},
+ {"log", 0x7e0000, 0x10000},
+ {"radio", 0x7f0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "support-list",
+ },
+
/** Firmware layout for the CPE510/520 V1 */
{
.id = "CPE510",