diff options
author | Leon M. George <leon@georgemail.eu> | 2019-07-26 20:34:01 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-07-26 02:14:45 +0200 |
commit | 15f585afc5b66f5addb6667001c303b5fd502ce5 (patch) | |
tree | 266ba2744345036537ac88f09667ab06963db46c /tools/mklibs/patches/100-apply-2to3.patch | |
parent | f8ea7c53fd227a9c21f0ca45a2c3345312ea54b5 (diff) | |
download | upstream-15f585afc5b66f5addb6667001c303b5fd502ce5.tar.gz upstream-15f585afc5b66f5addb6667001c303b5fd502ce5.tar.bz2 upstream-15f585afc5b66f5addb6667001c303b5fd502ce5.zip |
ath79: add support for Compex WPJ563
Specifications:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
2 Gigabit ethernet ports
3×3 2.4GHz on-board radio
miniPCIe slot that supports 5GHz radio
PoE 24V passive or 36V-56V passive with optional IEEE 802.3af/at
USB 3.0 header
Installation:
To install, either start tftp in bin/targets/ath79/generic/ and use
the u-boot prompt over UART:
tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj563-squashfs-sysupgrade.bin
erase 0x9f680000 +1
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
boot
The cpximg file can be used with sysupgrade in the stock firmware (add
SSH key in luci for root access) or with the built-in cpximg loader.
The cpximg loader can be started either by holding the reset button
during power up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept the image
appropriate for the board revision that is etched on the board.
For example, if the board is labelled '7A02':
tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj563-squashfs-cpximg-7a02.bin
MAC addresses:
<&uboot 0x2e010> *:71 (label)
<&uboot 0x2e018> *:72
<&uboot 0x2e020> *:73
<&uboot 0x2e028> *:74
Only the first two are used (for ethernet), the WiFi modules have
separate (valid) addresses. The latter two addresses are not used.
Signed-off-by: Leon M. George <leon@georgemail.eu>
Diffstat (limited to 'tools/mklibs/patches/100-apply-2to3.patch')
0 files changed, 0 insertions, 0 deletions