diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2021-04-23 18:32:11 +0900 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2022-05-21 22:27:01 +0100 |
| commit | 58b3b557b629f6a2046414e0e1b39189d918133f (patch) | |
| tree | f87ed3c4b85f06c01946915a5343aa622ec69cd8 /tools/llvm-bpf | |
| parent | e01b1c22dfb669abb0ad14c83ec9b3e35ff3d15c (diff) | |
| download | upstream-58b3b557b629f6a2046414e0e1b39189d918133f.tar.gz upstream-58b3b557b629f6a2046414e0e1b39189d918133f.tar.bz2 upstream-58b3b557b629f6a2046414e0e1b39189d918133f.zip | |
mediatek: mt7622: add support for ELECOM WRC-X3200GST3
ELECOM WRC-X3200GST3 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on
MT7622B.
Specifications:
- SoC : MediaTek MT7622B
- RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EK)
- Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- WLAN : 2.4/5 GHz 4T4R
- 2.4 GHz : MediaTek MT7622B (SoC)
- 5 GHz : MediaTek MT7915A
- Ethernet : 5x 10/100/1000 Mbps
- Switch : MediaTek MT7531
- LEDs/Keys : 6x/4x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J19: 3.3V, GND, TX, RX from power jack side
- 115200n8
- Power : 12 VDC, 1.5 A
Flash instruction using factory image:
1. Boot WRC-X3200GST3 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
MAC Addresses:
LAN : 04:AB:18:xx:xx:77 (Factory, 0x7FFF4 (hex))
WAN : 04:AB:18:xx:xx:78 (Factory, 0x7FFFA (hex))
2.4 GHz: 04:AB:18:xx:xx:79 (Factory, 0x4 (hex))
5 GHz : 04:AB:18:xx:xx:7A (none)
Note:
- currently, there is no "phy1tpt" trigger for 5 GHz wlan (MT7915) in
"trigger" file of LEDs, use "phy1radio" trigger instead
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'tools/llvm-bpf')
0 files changed, 0 insertions, 0 deletions