aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2021-02-17 21:17:03 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-02-24 02:53:53 +0100
commite464d365fe66bd6b5b238a18b32650a8b1d1ef63 (patch)
tree58cefcef426c76d5a580d9c9c95dd65890703818 /target
parent8d766aa669702f8291a95f985a0b4dd16b1cca2d (diff)
downloadupstream-e464d365fe66bd6b5b238a18b32650a8b1d1ef63.tar.gz
upstream-e464d365fe66bd6b5b238a18b32650a8b1d1ef63.tar.bz2
upstream-e464d365fe66bd6b5b238a18b32650a8b1d1ef63.zip
kirkwood: copy files to kernel 5.10
Copy config and patches to kernel 5.10. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target')
-rw-r--r--target/linux/kirkwood/config-5.10287
-rw-r--r--target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch485
-rw-r--r--target/linux/kirkwood/patches-5.10/100-ib62x0.patch53
-rw-r--r--target/linux/kirkwood/patches-5.10/101-iconnect.patch80
-rw-r--r--target/linux/kirkwood/patches-5.10/102-dockstar.patch62
-rw-r--r--target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch67
-rw-r--r--target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch52
-rw-r--r--target/linux/kirkwood/patches-5.10/106-goflexnet.patch53
-rw-r--r--target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch48
-rw-r--r--target/linux/kirkwood/patches-5.10/107-03-nsa325.patch54
-rw-r--r--target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch87
-rw-r--r--target/linux/kirkwood/patches-5.10/110-pogo_e02.patch68
-rw-r--r--target/linux/kirkwood/patches-5.10/111-l-50.patch47
-rw-r--r--target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch10
-rw-r--r--target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch62
-rw-r--r--target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch99
16 files changed, 1614 insertions, 0 deletions
diff --git a/target/linux/kirkwood/config-5.10 b/target/linux/kirkwood/config-5.10
new file mode 100644
index 0000000000..2ef4c05074
--- /dev/null
+++ b/target/linux/kirkwood/config-5.10
@@ -0,0 +1,287 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+# CONFIG_ARMADA_37XX_WATCHDOG is not set
+# CONFIG_ARMADA_THERMAL is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_ATA_LEDS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
+# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xf1012000
+CONFIG_DEBUG_UART_VIRT=0xfed12000
+CONFIG_DEBUG_UNCOMPRESS=y
+# CONFIG_DLCI is not set
+CONFIG_DMA_REMAP=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FORCE_PCI=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_PXA is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KIRKWOOD_CLK=y
+CONFIG_KIRKWOOD_THERMAL=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_NETXBIG=y
+CONFIG_LEDS_NS2=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_MVEBU_ANY=y
+CONFIG_MANGLE_BOOTARGS=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MIGRATION=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+# CONFIG_MTD_NAND_MARVELL is not set
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MV643XX_ETH=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+# CONFIG_MVNETA is not set
+# CONFIG_MVPP2 is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
+# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_IRQCHIP=y
+CONFIG_ORION_TIMER=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_BRIDGE_EMUL=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_MVEBU_A3700_UTMI is not set
+# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_KIRKWOOD=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_SX150X=y
+CONFIG_PLAT_ORION=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_QNAP is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_RATIONAL=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_SATA_PMP=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+# CONFIG_SERIAL_MVEBU_UART is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SOC_BUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_ARMADA_3700 is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRAM=y
+CONFIG_SRAM_EXEC=y
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_LED_TRIG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
new file mode 100644
index 0000000000..52caee7b40
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch
@@ -0,0 +1,485 @@
+From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Tue, 17 Mar 2020 21:28:01 +0100
+Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board
+
+This patch adds dts for the Check Point L-50 from 600/1100 series
+routers.
+
+Specification:
+-CPU: Marvell Kirkwood 88F6821 1200MHz
+-RAM: 512MB
+-Flash: NAND 512MB
+-WiFi: mPCIe card based on Atheros AR9287 b/g/n
+-WAN: 1 Gigabit Port (Marvell 88E1116R PHY)
+-LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3))
+-USB: 2x USB2.0
+-Express card slot
+-SD card slot
+-Serial console: RJ-45 115200 8n1
+-Unsupported DSL
+
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+Changes in v3:
+- fix typo and code style issues pointed by OpenWrt guys
+Changes in v2:
+- none
+
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++
+ 2 files changed, 439 insertions(+)
+ create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-iomega_ix2_200.dtb \
+ kirkwood-is2.dtb \
+ kirkwood-km_kirkwood.dtb \
++ kirkwood-l-50.dtb \
+ kirkwood-laplug.dtb \
+ kirkwood-linkstation-lsqvl.dtb \
+ kirkwood-linkstation-lsvl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-l-50.dts
+@@ -0,0 +1,438 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Check Point L-50 Board Description
++ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++ model = "Check Point L-50";
++ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200n8";
++ stdout-path = &uart0;
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
++ pinctrl-names = "default";
++
++ pmx_sysrst: pmx-sysrst {
++ marvell,pins = "mpp6";
++ marvell,function = "sysrst";
++ };
++
++ pmx_button29: pmx_button29 {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++
++ pmx_led38: pmx_led38 {
++ marvell,pins = "mpp38";
++ marvell,function = "gpio";
++ };
++
++ pmx_sdio_cd: pmx-sdio-cd {
++ marvell,pins = "mpp46";
++ marvell,function = "gpio";
++ };
++ };
++
++ serial@12000 {
++ status = "okay";
++ };
++
++ mvsdio@90000 {
++ status = "okay";
++ cd-gpios = <&gpio1 14 9>;
++ };
++
++ i2c@11000 {
++ status = "okay";
++ clock-frequency = <400000>;
++
++ gpio2: gpio-expander@20{
++ #gpio-cells = <2>;
++ #interrupt-cells = <2>;
++ compatible = "semtech,sx1505q";
++ reg = <0x20>;
++
++ gpio-controller;
++ };
++
++ /* Three GPIOs from 0x21 exp. are undescribed in dts:
++ * 1: DSL module reset (active low)
++ * 5: mPCIE reset (active low)
++ * 6: Express card reset (active low)
++ */
++ gpio3: gpio-expander@21{
++ #gpio-cells = <2>;
++ #interrupt-cells = <2>;
++ compatible = "semtech,sx1505q";
++ reg = <0x21>;
++
++ gpio-controller;
++ };
++
++ rtc@30 {
++ compatible = "s35390a";
++ reg = <0x30>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status_green {
++ label = "l-50:green:status";
++ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
++ };
++
++ status_red {
++ label = "l-50:red:status";
++ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
++ };
++
++ wifi {
++ label = "l-50:green:wifi";
++ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "phy0tpt";
++ };
++
++ internet_green {
++ label = "l-50:green:internet";
++ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
++ };
++
++ internet_red {
++ label = "l-50:red:internet";
++ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
++ };
++
++ usb1_green {
++ label = "l-50:green:usb1";
++ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port3>;
++ };
++
++ usb1_red {
++ label = "l-50:red:usb1";
++ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
++ };
++
++ usb2_green {
++ label = "l-50:green:usb2";
++ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "usbport";
++ trigger-sources = <&hub_port1>;
++ };
++
++ usb2_red {
++ label = "l-50:red:usb2";
++ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ usb2_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "usb2_pwr";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
++ regulator-always-on;
++ };
++
++ usb1_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "usb1_pwr";
++
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
++ regulator-always-on;
++ };
++
++ mpcie_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "mpcie_pwr";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ express_card_pwr {
++ compatible = "regulator-fixed";
++ regulator-name = "express_card_pwr";
++
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ regulator-always-on;
++ };
++
++ keys {
++ compatible = "gpio-keys";
++
++ factory_defaults {
++ label = "factory_defaults";
++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_RESTART>;
++ };
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy8: ethernet-phy@8 {
++ reg = <0x08>;
++ };
++
++ switch0: switch@10 {
++ compatible = "marvell,mv88e6085";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x10>;
++ dsa,member = <0 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan5";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan1";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan6";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan2";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan7";
++ };
++
++ switch0port5: port@5 {
++ reg = <5>;
++ phy-mode = "rgmii-txid";
++ link = <&switch1port5>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ phy-mode = "rgmii-id";
++ ethernet = <&eth1port>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++
++ switch@11 {
++ compatible = "marvell,mv88e6085";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x11>;
++ dsa,member = <0 1>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan3";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan8";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan4";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "dmz";
++ };
++
++ switch1port5: port@5 {
++ reg = <5>;
++ phy-mode = "rgmii-txid";
++ link = <&switch0port5>;
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "dsl";
++ fixed-link {
++ speed = <100>;
++ full-duplex;
++ };
++ };
++ };
++ };
++};
++
++&eth0 {
++ status = "okay";
++ ethernet0-port@0 {
++ phy-handle = <&ethphy8>;
++ };
++};
++
++&eth1 {
++ status = "okay";
++ ethernet1-port@0 {
++ speed = <1000>;
++ duplex = <1>;
++ };
++};
++
++&nand {
++ status = "okay";
++ pinctrl-0 = <&pmx_nand>;
++ pinctrl-names = "default";
++
++ partition@0 {
++ label = "u-boot";
++ reg = <0x00000000 0x000c0000>;
++ };
++
++ partition@a0000 {
++ label = "bootldr-env";
++ reg = <0x000c0000 0x00040000>;
++ };
++
++ partition@100000 {
++ label = "kernel-1";
++ reg = <0x00100000 0x00800000>;
++ };
++
++ partition@900000 {
++ label = "rootfs-1";
++ reg = <0x00900000 0x07100000>;
++ };
++
++ partition@7a00000 {
++ label = "kernel-2";
++ reg = <0x07a00000 0x00800000>;
++ };
++
++ partition@8200000 {
++ label = "rootfs-2";
++ reg = <0x08200000 0x07100000>;
++ };
++
++ partition@f300000 {
++ label = "default_sw";
++ reg = <0x0f300000 0x07900000>;
++ };
++
++ partition@16c00000 {
++ label = "logs";
++ reg = <0x16c00000 0x01800000>;
++ };
++
++ partition@18400000 {
++ label = "preset_cfg";
++ reg = <0x18400000 0x00100000>;
++ };
++
++ partition@18500000 {
++ label = "adsl";
++ reg = <0x18500000 0x00100000>;
++ };
++
++ partition@18600000 {
++ label = "storage";
++ reg = <0x18600000 0x07a00000>;
++ };
++};
++
++&rtc {
++ status = "disabled";
++};
++
++&pciec {
++ status = "okay";
++};
++
++&pcie0 {
++ status = "okay";
++};
++
++&sata_phy0 {
++ status = "disabled";
++};
++
++&sata_phy1 {
++ status = "disabled";
++};
++
++&usb0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++
++ port@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <1>;
++ #trigger-source-cells = <0>;
++
++ hub_port1: port@1 {
++ reg = <1>;
++ #trigger-source-cells = <0>;
++ };
++
++ hub_port3: port@3 {
++ reg = <3>;
++ #trigger-source-cells = <0>;
++ };
++ };
++};
diff --git a/target/linux/kirkwood/patches-5.10/100-ib62x0.patch b/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
new file mode 100644
index 0000000000..0637c24b63
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/100-ib62x0.patch
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -6,7 +6,14 @@
+
+ / {
+ model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ aliases {
++ led-boot = &led_green_os;
++ led-failsafe = &led_red_os;
++ led-running = &led_green_os;
++ led-upgrade = &led_red_os;
++ };
+
+ memory {
+ device_type = "memory";
+@@ -81,12 +88,12 @@
+ &pmx_led_usb_transfer>;
+ pinctrl-names = "default";
+
+- green-os {
++ led_green_os: green-os {
+ label = "ib62x0:green:os";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
++ default-state = "on";
+ };
+- red-os {
++ led_red_os: red-os {
+ label = "ib62x0:red:os";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+@@ -118,13 +125,13 @@
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x600000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@700000 {
+- label = "root";
+- reg = <0x0700000 0xf900000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0xfe00000>;
+ };
+
+ };
diff --git a/target/linux/kirkwood/patches-5.10/101-iconnect.patch b/target/linux/kirkwood/patches-5.10/101-iconnect.patch
new file mode 100644
index 0000000000..935e2dfcf5
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/101-iconnect.patch
@@ -0,0 +1,80 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -8,6 +8,13 @@
+ model = "Iomega Iconnect";
+ compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power_blue;
++ led-failsafe = &led_power_red;
++ led-running = &led_power_blue;
++ led-upgrade = &led_power_red;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+- linux,initrd-start = <0x4500040>;
+- linux,initrd-end = <0x4800000>;
+ };
+
+ ocp@f1000000 {
+@@ -89,12 +94,12 @@
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+- power-blue {
++ led_power_blue: power-blue {
+ label = "power:blue";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
++ default-state = "on";
+ };
+- power-red {
++ led_power_red: power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+@@ -146,28 +151,23 @@
+ status = "okay";
+
+ partition@0 {
+- label = "uboot";
+- reg = <0x0000000 0xc0000>;
++ label = "u-boot";
++ reg = <0x0000000 0xe0000>;
+ };
+
+- partition@a0000 {
+- label = "env";
+- reg = <0xa0000 0x20000>;
++ partition@e0000 {
++ label = "u-boot environment";
++ reg = <0xe0000 0x100000>;
+ };
+
+ partition@100000 {
+- label = "zImage";
+- reg = <0x100000 0x300000>;
+- };
+-
+- partition@540000 {
+- label = "initrd";
+- reg = <0x540000 0x300000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@980000 {
+- label = "boot";
+- reg = <0x980000 0x1f400000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0x1fe00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/102-dockstar.patch b/target/linux/kirkwood/patches-5.10/102-dockstar.patch
new file mode 100644
index 0000000000..127f84962c
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/102-dockstar.patch
@@ -0,0 +1,62 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -8,6 +8,13 @@
+ model = "Seagate FreeAgent Dockstar";
+ compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -42,12 +49,12 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
++ default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -78,18 +85,22 @@
+
+ partition@0 {
+ label = "u-boot";
+- reg = <0x0000000 0x100000>;
+- read-only;
++ reg = <0x0000000 0xe0000>;
++ };
++
++ partition@e0000 {
++ label = "u-boot environment";
++ reg = <0xe0000 0x100000>;
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ label = "second stage u-boot";
++ reg = <0x100000 0x200000>;
+ };
+
+- partition@500000 {
+- label = "data";
+- reg = <0x0500000 0xfb00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0xfe00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
new file mode 100644
index 0000000000..9313b4bc3e
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/103-iomega-ix2-200.patch
@@ -0,0 +1,67 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -8,6 +8,13 @@
+ model = "Iomega StorCenter ix2-200";
+ compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_health;
++ led-running = &led_power;
++ led-upgrade = &led_health;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -127,16 +134,16 @@
+ &pmx_led_rebuild &pmx_led_health >;
+ pinctrl-names = "default";
+
+- power_led {
++ led_power: power_led {
+ label = "status:white:power_led";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
++ default-state = "on";
+ };
+ rebuild_led {
+ label = "status:white:rebuild_led";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+- health_led {
++ led_health: health_led {
+ label = "status:red:health_led";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+@@ -186,18 +193,18 @@
+ };
+
+ partition@a0000 {
+- label = "env";
++ label = "u-boot environment";
+ reg = <0xa0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+- label = "uImage";
++ label = "kernel";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+- label = "rootfs";
++ label = "ubi";
+ reg = <0x400000 0x1C00000>;
+ };
+ };
+@@ -211,7 +218,7 @@
+ };
+
+ &eth0 {
+- status = "okay";
++ status = "disabled";
+ ethernet0-port@0 {
+ speed = <1000>;
+ duplex = <1>;
diff --git a/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
new file mode 100644
index 0000000000..0d97ad14a2
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/105-linksys-viper-dts.patch
@@ -0,0 +1,52 @@
+--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -24,6 +24,10 @@
+ };
+
+ aliases {
++ led-boot = &led_white_health;
++ led-failsafe = &led_white_health;
++ led-running = &led_white_health;
++ led-upgrade = &led_white_health;
+ serial0 = &uart0;
+ };
+
+@@ -56,9 +60,10 @@
+ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+ pinctrl-names = "default";
+
+- white-health {
++ led_white_health: white-health {
+ label = "viper:white:health";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
+ };
+
+ white-pulse {
+@@ -114,22 +119,22 @@
+ };
+
+ partition@200000 {
+- label = "kernel";
++ label = "kernel1";
+ reg = <0x200000 0x2A0000>;
+ };
+
+ partition@4a0000 {
+- label = "rootfs";
++ label = "rootfs1";
+ reg = <0x4A0000 0x1760000>;
+ };
+
+ partition@1c00000 {
+- label = "alt_kernel";
++ label = "kernel2";
+ reg = <0x1C00000 0x2A0000>;
+ };
+
+ partition@1ea0000 {
+- label = "alt_rootfs";
++ label = "rootfs2";
+ reg = <0x1EA0000 0x1760000>;
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/106-goflexnet.patch b/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
new file mode 100644
index 0000000000..82cf90841e
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/106-goflexnet.patch
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
+@@ -8,6 +8,13 @@
+ model = "Seagate GoFlex Net";
+ compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -85,12 +92,12 @@
+ >;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
++ default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -159,18 +166,8 @@
+ };
+
+ partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
+- };
+-
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
+- };
+-
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0xd800000>;
++ label = "ubi";
++ reg = <0x0100000 0x0ff00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
new file mode 100644
index 0000000000..df654033fd
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/107-01-zyxel-nsa3x0-common-nand-partitions.patch
@@ -0,0 +1,48 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+@@ -112,40 +112,16 @@
+
+ partition@0 {
+ label = "uboot";
+- reg = <0x0000000 0x0100000>;
++ reg = <0x0000000 0x00c0000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "uboot_env";
+- reg = <0x0100000 0x0080000>;
++ reg = <0x00c0000 0x0080000>;
+ };
+- partition@180000 {
+- label = "key_store";
+- reg = <0x0180000 0x0080000>;
+- };
+- partition@200000 {
+- label = "info";
+- reg = <0x0200000 0x0080000>;
+- };
+- partition@280000 {
+- label = "etc";
+- reg = <0x0280000 0x0a00000>;
+- };
+- partition@c80000 {
+- label = "kernel_1";
+- reg = <0x0c80000 0x0a00000>;
+- };
+- partition@1680000 {
+- label = "rootfs1";
+- reg = <0x1680000 0x2fc0000>;
+- };
+- partition@4640000 {
+- label = "kernel_2";
+- reg = <0x4640000 0x0a00000>;
+- };
+- partition@5040000 {
+- label = "rootfs2";
+- reg = <0x5040000 0x2fc0000>;
++ partition@140000 {
++ label = "ubi";
++ reg = <0x0140000 0x7ec0000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
new file mode 100644
index 0000000000..374c0895a9
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/107-03-nsa325.patch
@@ -0,0 +1,54 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa325.dts
++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+@@ -15,6 +15,13 @@
+ model = "ZyXEL NSA325";
+ compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_green_sys;
++ led-failsafe = &led_orange_sys;
++ led-running = &led_green_sys;
++ led-upgrade = &led_orange_sys;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+@@ -162,17 +169,19 @@
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+- green-sys {
++ led_green_sys: green-sys {
+ label = "nsa325:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++ default-state = "on";
+ };
+- orange-sys {
++ led_orange_sys: orange-sys {
+ label = "nsa325:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa325:green:hdd1";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ata1";
+ };
+ red-hdd1 {
+ label = "nsa325:red:hdd1";
+@@ -181,6 +190,7 @@
+ green-hdd2 {
+ label = "nsa325:green:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ata2";
+ };
+ red-hdd2 {
+ label = "nsa325:red:hdd2";
+@@ -189,6 +199,7 @@
+ green-usb {
+ label = "nsa325:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "usb-host";
+ };
+ green-copy {
+ label = "nsa325:green:copy";
diff --git a/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
new file mode 100644
index 0000000000..4273eb9af1
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/109-pogoplug_v4.patch
@@ -0,0 +1,87 @@
+--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+@@ -18,12 +18,20 @@
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
++ bootargs = "console=ttyS0,115200";
+ stdout-path = "uart0:115200n8";
+ };
+
+@@ -37,8 +45,8 @@
+ eject {
+ debounce-interval = <50>;
+ wakeup-source;
+- linux,code = <KEY_EJECTCD>;
+- label = "Eject Button";
++ linux,code = <KEY_RESTART>;
++ label = "Reset";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+@@ -48,12 +56,12 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+@@ -137,29 +145,19 @@
+ #size-cells = <1>;
+
+ partition@0 {
+- label = "u-boot";
+- reg = <0x00000000 0x200000>;
++ label = "uboot";
++ reg = <0x00000000 0x1c0000>;
+ read-only;
+ };
+
+- partition@200000 {
+- label = "uImage";
+- reg = <0x00200000 0x300000>;
+- };
+-
+- partition@500000 {
+- label = "uImage2";
+- reg = <0x00500000 0x300000>;
+- };
+-
+- partition@800000 {
+- label = "failsafe";
+- reg = <0x00800000 0x800000>;
++ partition@1c0000 {
++ label = "uboot_env";
++ reg = <0x001c0000 0x40000>;
+ };
+
+- partition@1000000 {
+- label = "root";
+- reg = <0x01000000 0x7000000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x00200000 0x7e00000>;
+ };
+ };
+ };
diff --git a/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
new file mode 100644
index 0000000000..fc384d3521
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/110-pogo_e02.patch
@@ -0,0 +1,68 @@
+--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -20,6 +20,13 @@
+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -33,12 +40,12 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
+- health {
++ led_health: health {
+ label = "pogo_e02:green:health";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
++ default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogo_e02:orange:fault";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+@@ -95,24 +102,24 @@
+ status = "okay";
+
+ partition@0 {
+- label = "u-boot";
+- reg = <0x0000000 0x100000>;
++ label = "uboot";
++ reg = <0x0 0xe0000>;
+ read-only;
+ };
+
+- partition@100000 {
+- label = "uImage";
+- reg = <0x0100000 0x400000>;
++ partition@e0000 {
++ label = "uboot_env";
++ reg = <0xe0000 0x20000>;
+ };
+
+- partition@500000 {
+- label = "pogoplug";
+- reg = <0x0500000 0x2000000>;
++ partition@100000 {
++ label = "second_stage_uboot";
++ reg = <0x100000 0x100000>;
+ };
+
+- partition@2500000 {
+- label = "root";
+- reg = <0x02500000 0x5b00000>;
++ partition@200000 {
++ label = "ubi";
++ reg = <0x200000 0x7e00000>;
+ };
+ };
+
diff --git a/target/linux/kirkwood/patches-5.10/111-l-50.patch b/target/linux/kirkwood/patches-5.10/111-l-50.patch
new file mode 100644
index 0000000000..bc933cb610
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/111-l-50.patch
@@ -0,0 +1,47 @@
+--- a/arch/arm/boot/dts/kirkwood-l-50.dts
++++ b/arch/arm/boot/dts/kirkwood-l-50.dts
+@@ -18,6 +18,13 @@
+ reg = <0x00000000 0x20000000>;
+ };
+
++ aliases {
++ led-boot = &led_status_green;
++ led-failsafe = &led_status_red;
++ led-running = &led_status_green;
++ led-upgrade = &led_status_red;
++ };
++
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+@@ -95,12 +102,12 @@
+ leds {
+ compatible = "gpio-leds";
+
+- status_green {
++ led_status_green: status_green {
+ label = "l-50:green:status";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+- status_red {
++ led_status_red: status_red {
+ label = "l-50:red:status";
+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+ };
+@@ -349,13 +356,8 @@
+ };
+
+ partition@100000 {
+- label = "kernel-1";
+- reg = <0x00100000 0x00800000>;
+- };
+-
+- partition@900000 {
+- label = "rootfs-1";
+- reg = <0x00900000 0x07100000>;
++ label = "ubi";
++ reg = <0x00100000 0x07900000>;
+ };
+
+ partition@7a00000 {
diff --git a/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
new file mode 100644
index 0000000000..c1645367a4
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/201-enable-sata-port-specific-led-triggers.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -119,6 +119,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+ bool "Marvell Kirkwood boards"
+ depends on ARCH_MULTI_V5
++ select ARCH_WANT_LIBATA_LEDS
+ select CPU_FEROCEON
+ select GPIOLIB
+ select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
new file mode 100644
index 0000000000..b7e7f50271
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/202-linksys-find-active-root.patch
@@ -0,0 +1,62 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+--- a/drivers/mtd/parsers/ofpart.c
++++ b/drivers/mtd/parsers/ofpart.c
+@@ -21,6 +21,8 @@ static bool node_has_compatible(struct d
+ return of_get_property(pp, "compatible", NULL);
+ }
+
++static int mangled_rootblock;
++
+ static int parse_fixed_partitions(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+@@ -28,6 +30,7 @@ static int parse_fixed_partitions(struct
+ struct mtd_partition *parts;
+ struct device_node *mtd_node;
+ struct device_node *ofpart_node;
++ const char *owrtpart = "ubi";
+ const char *partname;
+ struct device_node *pp;
+ int nr_parts, i, ret = 0;
+@@ -106,9 +109,15 @@ static int parse_fixed_partitions(struct
+ parts[i].size = of_read_number(reg + a_cells, s_cells);
+ parts[i].of_node = pp;
+
+- partname = of_get_property(pp, "label", &len);
+- if (!partname)
+- partname = of_get_property(pp, "name", &len);
++ if (mangled_rootblock && (i == mangled_rootblock)) {
++ partname = owrtpart;
++ } else {
++ partname = of_get_property(pp, "label", &len);
++
++ if (!partname)
++ partname = of_get_property(pp, "name", &len);
++ }
++
+ parts[i].name = partname;
+
+ if (of_get_property(pp, "read-only", &len))
+@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
+ return 0;
+ }
+
++static int __init active_root(char *str)
++{
++ get_option(&str, &mangled_rootblock);
++
++ if (!mangled_rootblock)
++ return 1;
++
++ return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
new file mode 100644
index 0000000000..e04a28206a
--- /dev/null
+++ b/target/linux/kirkwood/patches-5.10/203-blackarmor-nas220.patch
@@ -0,0 +1,99 @@
+--- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
++++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
+@@ -17,6 +17,13 @@
+ compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_status_amber;
++ led-failsafe = &led_status_amber;
++ led-running = &led_status_blue;
++ led-upgrade = &led_status_amber;
++ };
++
+ memory { /* 128 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -36,14 +43,14 @@
+ compatible = "gpio-keys";
+
+ reset {
+- label = "Reset";
+- linux,code = <KEY_POWER>;
++ label = "Reset Button";
++ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+- button {
+- label = "Power";
+- linux,code = <KEY_SLEEP>;
++ power {
++ label = "Power Button";
++ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+@@ -51,11 +58,27 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
+- blue-power {
++ led_power_blue: power_blue {
+ label = "nas220:blue:power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
++
++ disk_blue {
++ label = "nas220:blue:disk";
++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "disk-activity";
++ };
++
++ led_status_blue: status_blue {
++ label = "nas220:blue:status";
++ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
++ };
++
++ led_status_amber: status_amber {
++ label = "nas220:amber:status";
++ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
++ };
+ };
+
+ regulators {
+@@ -153,6 +176,33 @@
+
+ &nand {
+ status = "okay";
++
++ partitions {
++ compatible = "fixed-partitions";
++
++ partition@0 {
++ label = "uboot";
++ reg = <0x0 0xa0000>;
++ read-only;
++ };
++
++ partition@a0000 {
++ label = "uboot-env";
++ reg = <0xa0000 0x10000>;
++ read-only;
++ };
++
++ partition@b0000 {
++ label = "reserved";
++ reg = <0xb0000 0x10000>;
++ read-only;
++ };
++
++ partition@c0000 {
++ label = "ubi";
++ reg = <0xc0000 0x1e80000>;
++ };
++ };
+ };
+
+ &mdio {