aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorRobert Marko <robimarko@gmail.com>2021-05-19 21:04:43 +0200
committerRobert Marko <robimarko@gmail.com>2023-01-16 12:42:23 +0100
commit8364f0816417bfe404f7bded4eaa4f4a60c6d006 (patch)
tree58e4fd81ca5b9ddc0a016a7b477e748b3fe7b7b6 /target
parentbc120521db64295260e8bc6caddeeb4556394306 (diff)
downloadupstream-8364f0816417bfe404f7bded4eaa4f4a60c6d006.tar.gz
upstream-8364f0816417bfe404f7bded4eaa4f4a60c6d006.tar.bz2
upstream-8364f0816417bfe404f7bded4eaa4f4a60c6d006.zip
ipq807x: add Xiaomi AX3600
Xiaomi AX3600 is a budget 802.11ax dual-band router/AP. Specifications: * CPU: Qualcomm IPQ8071A Quad core Cortex-A53 1.4GHz * RAM: 512MB of DDR3 * Storage: 256MB of parallel NAND * Ethernet: 4x1G RJ45 ports (QCA8075) with 1x status LED per port * WLAN: * PCI based Qualcomm QCA9889 1x1 802.11ac Wawe 2 for IoT * 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate * 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate * LED-s: * System (Blue and Yellow) * IoT (Blue) * Network (Blue and Yellow) * Buttons: 1x Soft reset * Power: 12V DC Jack Installation instructions: Obtaining SSH access is mandatory https://openwrt.org/inbox/toh/xiaomi/xiaomi_ax3600#obtain_ssh_access Installation is done by the ubiformat method, through SSH: 1. Open an SSH shell to the router 2. Copy the file openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi to the /tmp directory 3. Check which rootfs partition is your router booted in (0 = rootfs | 1 = rootfs_1): nvram get flag_boot_rootfs 4. Find the rootfs and rootfs_1 mtd indexes respectively: cat /proc/mtd Please confirm if mtd12 and mtd13 are the correct indexes from above! 5. Use the command ubiformat to flash the opposite mtd with UBI image: If nvram get flag_boot_rootfs returned 0: ubiformat /dev/mtd13 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi -s 2048 -O 2048 && nvram set flag_boot_rootfs=1 && nvram set flag_last_success=1 && nvram commit otherwise: ubiformat /dev/mtd12 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-initramfs-factory.ubi -s 2048 -O 2048 && nvram set flag_boot_rootfs=0 && nvram set flag_last_success=0 && nvram commit 6. Reboot the device by: reboot Previous commands flashed an ubinized OpenWrt initramfs that will serve as the intermediate step since OpenWrt uses unified rootfs in order to fully utilize NAND and provide enough space for packages. Continue in order to pernamently flash OpenWrt: 7. SSH into OpenWrt from one of the LAN ports 8. Copy the file openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-sysupgrade.bin to the /tmp directory 9. Sysupgrade the device: sysupgrade -n /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-sysupgrade.bin Device will reboot with OpenWrt, and then sysupgrade can be used to upgrade the device when desired. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Robert Marko <robimarko@gmail.com>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq807x/base-files/etc/board.d/01_leds16
-rw-r--r--target/linux/ipq807x/base-files/etc/board.d/02_network28
-rw-r--r--target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata20
-rw-r--r--target/linux/ipq807x/base-files/lib/upgrade/platform.sh65
-rw-r--r--target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts73
-rw-r--r--target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi311
-rw-r--r--target/linux/ipq807x/image/generic.mk18
7 files changed, 531 insertions, 0 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/01_leds b/target/linux/ipq807x/base-files/etc/board.d/01_leds
new file mode 100644
index 0000000000..215ab7ca21
--- /dev/null
+++ b/target/linux/ipq807x/base-files/etc/board.d/01_leds
@@ -0,0 +1,16 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+xiaomi,ax3600)
+ ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
new file mode 100644
index 0000000000..4dc118ed29
--- /dev/null
+++ b/target/linux/ipq807x/base-files/etc/board.d/02_network
@@ -0,0 +1,28 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq807x_setup_interfaces()
+{
+ local board="$1"
+
+ case "$board" in
+ xiaomi,ax3600)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+ ;;
+ *)
+ echo "Unsupported hardware. Network interfaces not initialized"
+ ;;
+ esac
+}
+
+board_config_update
+board=$(board_name)
+ipq807x_setup_interfaces $board
+board_config_flush
+
+exit 0
diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
new file mode 100644
index 0000000000..578ff7ad45
--- /dev/null
+++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
+ case "$board" in
+ xiaomi,ax3600)
+ caldata_extract "0:art" 0x1000 0x20000
+ ;;
+ esac
+ ;;
+*)
+ exit 1
+ ;;
+esac
diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..d63e71251b
--- /dev/null
+++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,65 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+xiaomi_initramfs_prepare() {
+ # Wipe UBI if running initramfs
+ [ "$(rootfs_type)" = "tmpfs" ] || return 0
+
+ local rootfs_mtdnum="$( find_mtd_index rootfs )"
+ if [ ! "$rootfs_mtdnum" ]; then
+ echo "unable to find mtd partition rootfs"
+ return 1
+ fi
+
+ local kern_mtdnum="$( find_mtd_index ubi_kernel )"
+ if [ ! "$kern_mtdnum" ]; then
+ echo "unable to find mtd partition ubi_kernel"
+ return 1
+ fi
+
+ ubidetach -m "$rootfs_mtdnum"
+ ubiformat /dev/mtd$rootfs_mtdnum -y
+
+ ubidetach -m "$kern_mtdnum"
+ ubiformat /dev/mtd$kern_mtdnum -y
+}
+
+platform_check_image() {
+ return 0;
+}
+
+platform_pre_upgrade() {
+ case "$(board_name)" in
+ xiaomi,ax3600)
+ xiaomi_initramfs_prepare
+ ;;
+ esac
+}
+
+platform_do_upgrade() {
+ case "$(board_name)" in
+ xiaomi,ax3600)
+ # Make sure that UART is enabled
+ fw_setenv boot_wait on
+ fw_setenv uart_en 1
+
+ # Enforce single partition.
+ fw_setenv flag_boot_rootfs 0
+ fw_setenv flag_last_success 0
+ fw_setenv flag_boot_success 1
+ fw_setenv flag_try_sys1_failed 8
+ fw_setenv flag_try_sys2_failed 8
+
+ # Kernel and rootfs are placed in 2 different UBI
+ CI_KERN_UBIPART="ubi_kernel"
+ CI_ROOT_UBIPART="rootfs"
+ nand_do_upgrade "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
new file mode 100644
index 0000000000..f3e82e2251
--- /dev/null
+++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
+
+/dts-v1/;
+
+#include "ipq8071-ax3600.dtsi"
+
+/ {
+ model = "Xiaomi AX3600";
+ compatible = "xiaomi,ax3600", "qcom,ipq8074";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_blue: system-blue {
+ label = "blue:system";
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_yellow: system-yellow {
+ label = "yellow:system";
+ gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+ };
+
+ network-yellow {
+ label = "yellow:network";
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ network-blue {
+ label = "blue:network";
+ gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ aiot {
+ label = "blue:aiot";
+ gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&pcie_qmp0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ status = "okay";
+
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+
+ qcom,ath10k-calibration-variant = "Xiaomi-AX3600";
+ nvmem-cell-names = "calibration";
+ nvmem-cells = <&caldata_qca9889>;
+ };
+ };
+};
+
+&wifi {
+ qcom,ath11k-calibration-variant = "Xiaomi-AX3600";
+};
diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
new file mode 100644
index 0000000000..c18cef52f3
--- /dev/null
+++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
+
+#include "ipq8074-512m.dtsi"
+#include "ipq8074-ac-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart5;
+ led-boot = &led_system_yellow;
+ led-failsafe = &led_system_yellow;
+ led-running = &led_system_blue;
+ led-upgrade = &led_system_yellow;
+ label-mac-device = &dp2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_0";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+
+ /*
+ * Bootloader will find the NAND DT node by the compatible and
+ * then "fixup" it by adding the partitions from the SMEM table
+ * using the legacy bindings thus making it impossible for us
+ * to change the partition table or utilize NVMEM for calibration.
+ * So add a dummy partitions node that bootloader will populate
+ * and set it as disabled so the kernel ignores it instead of
+ * printing warnings due to the broken way bootloader adds the
+ * partitions.
+ */
+ partitions {
+ status = "disabled";
+ };
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:sbl1";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "0:mibib";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "0:qsee";
+ reg = <0x200000 0x300000>;
+ read-only;
+ };
+
+ partition@500000 {
+ label = "0:devcfg";
+ reg = <0x500000 0x80000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "0:rpm";
+ reg = <0x580000 0x80000>;
+ read-only;
+ };
+
+ partition@600000 {
+ label = "0:cdt";
+ reg = <0x600000 0x80000>;
+ read-only;
+ };
+
+ partition@680000 {
+ label = "0:appsblenv";
+ reg = <0x680000 0x80000>;
+ };
+
+ partition@700000 {
+ label = "0:appsbl";
+ reg = <0x700000 0x100000>;
+ read-only;
+ };
+
+ partition@800000 {
+ label = "0:art";
+ reg = <0x800000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_dp2: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_dp3: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ macaddr_dp4: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+
+ macaddr_dp5: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+
+ caldata_qca9889: caldata@4d000 {
+ reg = <0x33000 0x844>;
+ };
+ };
+
+ partition@880000 {
+ label = "bdata";
+ reg = <0x880000 0x80000>;
+ };
+
+ partition@900000 {
+ /* This is crash + crash_syslog parts combined */
+ label = "pstore";
+ reg = <0x900000 0x100000>;
+ };
+
+ /* Make the first rootfs a dedicated ubi partition for kernel */
+ partition@a00000 {
+ label = "ubi_kernel";
+ reg = <0xa00000 0x23c0000>;
+ };
+
+ /* Place the real rootfs in the original second rootfs and
+ * expand it to the end of the nand
+ */
+ rootfs: partition@2dc0000 {
+ label = "rootfs";
+ reg = <0x2dc0000 0xd240000>;
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+ qca8075_1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+
+ qca8075_2: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+
+ qca8075_4: ethernet-phy@4 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <4>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_cpu_bmp = <0x1>; /* cpu port bitmap */
+ switch_lan_bmp = <0x1e>; /* lan port bitmap */
+ switch_wan_bmp = <0x20>; /* wan port bitmap */
+ switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
+ switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
+ switch_mac_mode2 = <0xff>; /* mac mode for uniphy instance2*/
+ bm_tick_mode = <0>; /* bm tick mode */
+ tm_tick_mode = <0>; /* tm tick mode */
+
+ qcom,port_phyinfo {
+ port@0 {
+ port_id = <1>;
+ phy_address = <0>;
+ };
+ port@1 {
+ port_id = <2>;
+ phy_address = <1>;
+ };
+ port@2 {
+ port_id = <3>;
+ phy_address = <2>;
+ };
+ port@3 {
+ port_id = <4>;
+ phy_address = <3>;
+ };
+ port@4 {
+ port_id = <5>;
+ phy_address = <4>;
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp2 {
+ status = "okay";
+ phy-handle = <&qca8075_1>;
+ label = "wan";
+ nvmem-cells = <&macaddr_dp2>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp3 {
+ status = "okay";
+ phy-handle = <&qca8075_2>;
+ label = "lan1";
+ nvmem-cells = <&macaddr_dp3>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan2";
+ nvmem-cells = <&macaddr_dp4>;
+ nvmem-cell-names = "mac-address";
+};
+
+&dp5 {
+ status = "okay";
+ phy-handle = <&qca8075_4>;
+ label = "lan3";
+ nvmem-cells = <&macaddr_dp5>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-fw-memory-mode = <1>;
+};
diff --git a/target/linux/ipq807x/image/generic.mk b/target/linux/ipq807x/image/generic.mk
index 91a3daeedf..11cca54506 100644
--- a/target/linux/ipq807x/image/generic.mk
+++ b/target/linux/ipq807x/image/generic.mk
@@ -16,3 +16,21 @@ define Device/UbiFit
IMAGE/factory.ubi := append-ubi
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+
+define Device/xiaomi_ax3600
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := AX3600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@ac04
+ SOC := ipq8071
+ KERNEL_SIZE := 36608k
+ DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_ax3600