aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2020-02-29 16:49:09 +0100
committerHauke Mehrtens <hauke@hauke-m.de>2020-03-12 09:28:23 +0100
commit8334e04d24462b6fa3b53c77442a21f473149a1d (patch)
tree679fbfabaf7b53bd3d359092c77eb46a8a09ec45 /target
parent7a6a85ce108c4883c0d99d5ecdd30512af11dff4 (diff)
downloadupstream-8334e04d24462b6fa3b53c77442a21f473149a1d.tar.gz
upstream-8334e04d24462b6fa3b53c77442a21f473149a1d.tar.bz2
upstream-8334e04d24462b6fa3b53c77442a21f473149a1d.zip
gemini: Remove kernel 4.14 support
This target was switched to kernel 4.19 more than 6 months ago in commit f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now with kernel 5.4 support being added it gets harder to support kernel 4.14 in addition to kernel 4.19 and 5.4. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/gemini/config-4.14435
-rw-r--r--target/linux/gemini/patches-4.14/0001-cache-patch-from-OpenWRT.patch50
-rw-r--r--target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch33
-rw-r--r--target/linux/gemini/patches-4.14/0003-ARM-dts-Add-TVE200-to-the-Gemini-SoC-DTSI.patch51
-rw-r--r--target/linux/gemini/patches-4.14/0004-pinctrl-Add-skew-delay-pin-config-and-bindings.patch73
-rw-r--r--target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch112
-rw-r--r--target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch280
-rw-r--r--target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch186
-rw-r--r--target/linux/gemini/patches-4.14/0008-pinctrl-gemini-Fix-missing-pad-descriptions.patch27
-rw-r--r--target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch25
-rw-r--r--target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch25
-rw-r--r--target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch198
-rw-r--r--target/linux/gemini/patches-4.14/0012-ARM-dts-Add-ethernet-PHYs-to-the-a-bunch-of-Geminis.patch90
-rw-r--r--target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch272
-rw-r--r--target/linux/gemini/patches-4.14/0014-ARM-dts-Flags-D-Link-DIR-685-I2C-bus-gpios.patch27
-rw-r--r--target/linux/gemini/patches-4.14/0015-ARM-dts-Add-PCI-to-WBD111-and-WBD222.patch74
-rw-r--r--target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch113
-rw-r--r--target/linux/gemini/patches-4.14/0017-watchdog-gemini-ftwdt010-rename-DT-bindings.patch88
-rw-r--r--target/linux/gemini/patches-4.14/0018-watchdog-gemini-ftwdt010-rename-driver-and-symbols.patch527
-rw-r--r--target/linux/gemini/patches-4.14/0019-watchdog-ftwdt010-Make-interrupt-optional.patch93
-rw-r--r--target/linux/gemini/patches-4.14/0020-soc-Add-SoC-driver-for-Gemini.patch113
-rw-r--r--target/linux/gemini/patches-4.14/0021-net-ethernet-Add-DT-bindings-for-the-Gemini-ethernet.patch119
-rw-r--r--target/linux/gemini/patches-4.14/0022-net-ethernet-Add-a-driver-for-Gemini-gigabit-etherne.patch3661
-rw-r--r--target/linux/gemini/patches-4.14/0023-ARM-dts-Add-ethernet-to-the-Gemini-SoC.patch74
-rw-r--r--target/linux/gemini/patches-4.14/0024-net-gemini-Depend-on-HAS_IOMEM.patch30
-rw-r--r--target/linux/gemini/patches-4.14/0025-ARM-dts-Set-D-Link-DNS-313-SATA-to-muxmode-0.patch36
-rw-r--r--target/linux/gemini/patches-4.14/0026-power-gemini-poweroff-Avoid-spurious-poweroff.patch80
-rw-r--r--target/linux/gemini/patches-4.14/0027-usb-host-add-DT-bindings-for-faraday-fotg2.patch65
-rw-r--r--target/linux/gemini/patches-4.14/0028-usb-host-fotg2-add-device-tree-probing.patch61
-rw-r--r--target/linux/gemini/patches-4.14/0029-usb-host-fotg2-add-silicon-clock-handling.patch99
-rw-r--r--target/linux/gemini/patches-4.14/0030-usb-host-fotg2-add-Gemini-specific-handling.patch131
-rw-r--r--target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch149
-rw-r--r--target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch38
-rw-r--r--target/linux/gemini/patches-4.14/0034-ARM-dts-Add-ethernet-to-a-bunch-of-platforms.patch116
-rw-r--r--target/linux/gemini/patches-4.14/0900-arm-dts-gemini-add-openwrt-partitions-for-nas4220b.patch17
-rw-r--r--target/linux/gemini/patches-4.14/0901-arm-dts-gemini-fix-ethernet-for-nas4220b.patch69
-rw-r--r--target/linux/gemini/patches-4.14/0902-arm-dts-gemini-add-second-ata-for-nas4220b.patch13
-rw-r--r--target/linux/gemini/patches-4.14/0903-arm-dts-gemini-disable-usb-port-1-until-fixed.patch11
-rw-r--r--target/linux/gemini/patches-4.14/0904-net-cortina-fix-uninitialized-struct-member-usage.patch23
-rw-r--r--target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch82
40 files changed, 0 insertions, 7766 deletions
diff --git a/target/linux/gemini/config-4.14 b/target/linux/gemini/config-4.14
deleted file mode 100644
index fb96aa78c7..0000000000
--- a/target/linux/gemini/config-4.14
+++ /dev/null
@@ -1,435 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_BPF_SYSCALL is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FHANDLE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF_GEMINI=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_NS=y
-CONFIG_NET_PACKET_ENGINE=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OABI_COMPAT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_PMP=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKS_RCU=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USERIO is not set
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/gemini/patches-4.14/0001-cache-patch-from-OpenWRT.patch b/target/linux/gemini/patches-4.14/0001-cache-patch-from-OpenWRT.patch
deleted file mode 100644
index 4430ffee9d..0000000000
--- a/target/linux/gemini/patches-4.14/0001-cache-patch-from-OpenWRT.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 57615e112aba6ae4c831d50e769c2c102f013686 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 7 Jun 2016 22:53:24 +0200
-Subject: [PATCH 01/31] cache patch from OpenWRT
-
----
- arch/arm/mm/cache-fa.S | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mm/cache-fa.S
-+++ b/arch/arm/mm/cache-fa.S
-@@ -24,7 +24,8 @@
- /*
- * The size of one data cache line.
- */
--#define CACHE_DLINESIZE 16
-+#define CACHE_DLINESIZE 16
-+#define CACHE_DLINESHIFT 4
-
- /*
- * The total size of the data cache.
-@@ -169,7 +170,17 @@ ENTRY(fa_flush_kern_dcache_area)
- * - start - virtual start address
- * - end - virtual end address
- */
-+__flush_whole_dcache:
-+ mcr p15, 0, r0, c7, c14, 0 @ clean/invalidate D cache
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
-+ mov pc, lr
-+
- fa_dma_inv_range:
-+ sub r3, r1, r0 @ calculate total size
-+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
-+ bhs __flush_whole_dcache @ flush whole D cache
-+
- tst r0, #CACHE_DLINESIZE - 1
- bic r0, r0, #CACHE_DLINESIZE - 1
- mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry
-@@ -193,6 +204,10 @@ fa_dma_inv_range:
- * - end - virtual end address
- */
- fa_dma_clean_range:
-+ sub r3, r1, r0 @ calculate total size
-+ cmp r3, #CACHE_DLIMIT @ total size >= limit?
-+ bhs __flush_whole_dcache @ flush whole D cache
-+
- bic r0, r0, #CACHE_DLINESIZE - 1
- 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
- add r0, r0, #CACHE_DLINESIZE
diff --git a/target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch b/target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch
deleted file mode 100644
index d4e93f88b2..0000000000
--- a/target/linux/gemini/patches-4.14/0002-pinctrl-gemini-Add-missing-functions.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From fd7823e6993f440930e9cb85e56375be5823485c Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 14 Oct 2017 17:13:03 +0200
-Subject: [PATCH 02/31] pinctrl: gemini: Add missing functions
-
-Some two functions were missing from the Gemini pin control
-driver. Noticed when trying to use ethernet. Fix it up by
-adding them.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2102,6 +2102,16 @@ static const struct gemini_pmx_func gemi
- .num_groups = ARRAY_SIZE(satagrps),
- },
- {
-+ .name = "usb",
-+ .groups = usbgrps,
-+ .num_groups = ARRAY_SIZE(usbgrps),
-+ },
-+ {
-+ .name = "gmii",
-+ .groups = gmiigrps,
-+ .num_groups = ARRAY_SIZE(gmiigrps),
-+ },
-+ {
- .name = "pci",
- .groups = pcigrps,
- .num_groups = ARRAY_SIZE(pcigrps),
diff --git a/target/linux/gemini/patches-4.14/0003-ARM-dts-Add-TVE200-to-the-Gemini-SoC-DTSI.patch b/target/linux/gemini/patches-4.14/0003-ARM-dts-Add-TVE200-to-the-Gemini-SoC-DTSI.patch
deleted file mode 100644
index 81d9788af0..0000000000
--- a/target/linux/gemini/patches-4.14/0003-ARM-dts-Add-TVE200-to-the-Gemini-SoC-DTSI.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 00e53d08bbe92051765c5bb94223b6f628cd3740 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 11 Oct 2017 19:45:19 +0200
-Subject: [PATCH 03/31] ARM: dts: Add TVE200 to the Gemini SoC DTSI
-
-The Faraday TVE200 is present in the Gemini SoC, sometimes
-under the name "TVC". Add it to the SoC DTSI file along with
-its resources.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- arch/arm/boot/dts/gemini.dtsi | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -142,6 +142,12 @@
- groups = "idegrp";
- };
- };
-+ tvc_default_pins: pinctrl-tvc {
-+ mux {
-+ function = "tvc";
-+ groups = "tvcgrp";
-+ };
-+ };
- };
- };
-
-@@ -348,5 +354,20 @@
- memcpy-bus-width = <32>;
- #dma-cells = <2>;
- };
-+
-+ display-controller@6a000000 {
-+ compatible = "cortina,gemini-tvc", "faraday,tve200";
-+ reg = <0x6a000000 0x1000>;
-+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
-+ resets = <&syscon GEMINI_RESET_TVC>;
-+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
-+ <&syscon GEMINI_CLK_TVC>;
-+ clock-names = "PCLK", "TVE";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&tvc_default_pins>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
- };
- };
diff --git a/target/linux/gemini/patches-4.14/0004-pinctrl-Add-skew-delay-pin-config-and-bindings.patch b/target/linux/gemini/patches-4.14/0004-pinctrl-Add-skew-delay-pin-config-and-bindings.patch
deleted file mode 100644
index ac39a3282d..0000000000
--- a/target/linux/gemini/patches-4.14/0004-pinctrl-Add-skew-delay-pin-config-and-bindings.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From eb3742c4250c6a79e7080bdb6286e5df50c7f26a Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 28 Oct 2017 15:37:17 +0200
-Subject: [PATCH 04/31] pinctrl: Add skew-delay pin config and bindings
-
-Some pin controllers (such as the Gemini) can control the
-expected clock skew and output delay on certain pins with a
-sub-nanosecond granularity. This is typically done by shunting
-in a number of double inverters in front of or behind the pin.
-Make it possible to configure this with a generic binding.
-
-Cc: devicetree@vger.kernel.org
-Acked-by: Rob Herring <robh@kernel.org>
-Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 4 ++++
- drivers/pinctrl/pinconf-generic.c | 2 ++
- include/linux/pinctrl/pinconf-generic.h | 5 +++++
- 3 files changed, 11 insertions(+)
-
---- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-@@ -271,6 +271,10 @@ output-high - set the pin to output mod
- sleep-hardware-state - indicate this is sleep related state which will be programmed
- into the registers for the sleep state.
- slew-rate - set the slew rate
-+skew-delay - this affects the expected clock skew on input pins
-+ and the delay before latching a value to an output
-+ pin. Typically indicates how many double-inverters are
-+ used to delay the signal.
-
- For example:
-
---- a/drivers/pinctrl/pinconf-generic.c
-+++ b/drivers/pinctrl/pinconf-generic.c
-@@ -49,6 +49,7 @@ static const struct pin_config_item conf
- PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
- PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
- PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
-+ PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay", NULL, true),
- };
-
- static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
-@@ -181,6 +182,7 @@ static const struct pinconf_generic_para
- { "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
- { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
- { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
-+ { "skew-delay", PIN_CONFIG_SKEW_DELAY, 0 },
- };
-
- /**
---- a/include/linux/pinctrl/pinconf-generic.h
-+++ b/include/linux/pinctrl/pinconf-generic.h
-@@ -90,6 +90,10 @@
- * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
- * this parameter (on a custom format) tells the driver which alternative
- * slew rate to use.
-+ * @PIN_CONFIG_SKEW_DELAY: if the pin has programmable skew rate (on inputs)
-+ * or latch delay (on outputs) this parameter (in a custom format)
-+ * specifies the clock skew or latch delay. It typically controls how
-+ * many double inverters are put in front of the line.
- * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if
- * you need to pass in custom configurations to the pin controller, use
- * PIN_CONFIG_END+1 as the base offset.
-@@ -117,6 +121,7 @@ enum pin_config_param {
- PIN_CONFIG_POWER_SOURCE,
- PIN_CONFIG_SLEEP_HARDWARE_STATE,
- PIN_CONFIG_SLEW_RATE,
-+ PIN_CONFIG_SKEW_DELAY,
- PIN_CONFIG_END = 0x7F,
- PIN_CONFIG_MAX = 0xFF,
- };
diff --git a/target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch b/target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch
deleted file mode 100644
index f9debdd900..0000000000
--- a/target/linux/gemini/patches-4.14/0005-pinctrl-gemini-Use-generic-DT-parser.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 09240ae27ffca65518f7b9d2360c020c1b1ddabe Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 28 Oct 2017 15:37:18 +0200
-Subject: [PATCH 05/31] pinctrl: gemini: Use generic DT parser
-
-We can just use the generic Device Tree parser code
-in this driver and save some code.
-
-Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/Kconfig | 1 +
- drivers/pinctrl/pinctrl-gemini.c | 66 +++-------------------------------------
- 2 files changed, 5 insertions(+), 62 deletions(-)
-
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -153,6 +153,7 @@ config PINCTRL_GEMINI
- depends on ARCH_GEMINI
- default ARCH_GEMINI
- select PINMUX
-+ select GENERIC_PINCONF
- select MFD_SYSCON
-
- config PINCTRL_MCP23S08
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -13,6 +13,8 @@
- #include <linux/pinctrl/machine.h>
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- #include <linux/regmap.h>
-@@ -1946,73 +1948,13 @@ static void gemini_pin_dbg_show(struct p
- seq_printf(s, " " DRIVER_NAME);
- }
-
--static int gemini_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-- struct device_node *np,
-- struct pinctrl_map **map,
-- unsigned int *reserved_maps,
-- unsigned int *num_maps)
--{
-- int ret;
-- const char *function = NULL;
-- const char *group;
-- struct property *prop;
--
-- ret = of_property_read_string(np, "function", &function);
-- if (ret < 0)
-- return ret;
--
-- ret = of_property_count_strings(np, "groups");
-- if (ret < 0)
-- return ret;
--
-- ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
-- num_maps, ret);
-- if (ret < 0)
-- return ret;
--
-- of_property_for_each_string(np, "groups", prop, group) {
-- ret = pinctrl_utils_add_map_mux(pctldev, map, reserved_maps,
-- num_maps, group, function);
-- if (ret < 0)
-- return ret;
-- pr_debug("ADDED FUNCTION %s <-> GROUP %s\n",
-- function, group);
-- }
--
-- return 0;
--}
--
--static int gemini_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-- struct device_node *np_config,
-- struct pinctrl_map **map,
-- unsigned int *num_maps)
--{
-- unsigned int reserved_maps = 0;
-- struct device_node *np;
-- int ret;
--
-- *map = NULL;
-- *num_maps = 0;
--
-- for_each_child_of_node(np_config, np) {
-- ret = gemini_pinctrl_dt_subnode_to_map(pctldev, np, map,
-- &reserved_maps, num_maps);
-- if (ret < 0) {
-- pinctrl_utils_free_map(pctldev, *map, *num_maps);
-- return ret;
-- }
-- }
--
-- return 0;
--};
--
- static const struct pinctrl_ops gemini_pctrl_ops = {
- .get_groups_count = gemini_get_groups_count,
- .get_group_name = gemini_get_group_name,
- .get_group_pins = gemini_get_group_pins,
- .pin_dbg_show = gemini_pin_dbg_show,
-- .dt_node_to_map = gemini_pinctrl_dt_node_to_map,
-- .dt_free_map = pinctrl_utils_free_map,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+ .dt_free_map = pinconf_generic_dt_free_map,
- };
-
- /**
diff --git a/target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch b/target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch
deleted file mode 100644
index 87a051e1b2..0000000000
--- a/target/linux/gemini/patches-4.14/0006-pinctrl-gemini-Implement-clock-skew-delay-config.patch
+++ /dev/null
@@ -1,280 +0,0 @@
-From 43e8f011ddbb293e0a3394d0f39819ea2ead4a1b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 28 Oct 2017 15:37:19 +0200
-Subject: [PATCH 06/31] pinctrl: gemini: Implement clock skew/delay config
-
-This enabled pin config on the Gemini driver and implements
-pin skew/delay so that the ethernet pins clocking can be
-properly configured.
-
-Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../bindings/pinctrl/cortina,gemini-pinctrl.txt | 10 +-
- drivers/pinctrl/pinctrl-gemini.c | 178 ++++++++++++++++++++-
- 2 files changed, 182 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
-@@ -9,8 +9,14 @@ The pin controller node must be a subnod
- Required properties:
- - compatible: "cortina,gemini-pinctrl"
-
--Subnodes of the pin controller contain pin control multiplexing set-up.
--Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes.
-+Subnodes of the pin controller contain pin control multiplexing set-up
-+and pin configuration of individual pins.
-+
-+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
-+and generic pin config nodes.
-+
-+Supported configurations:
-+- skew-delay is supported on the Ethernet pins
-
- Example:
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -24,6 +24,19 @@
- #define DRIVER_NAME "pinctrl-gemini"
-
- /**
-+ * struct gemini_pin_conf - information about configuring a pin
-+ * @pin: the pin number
-+ * @reg: config register
-+ * @mask: the bits affecting the configuration of the pin
-+ */
-+struct gemini_pin_conf {
-+ unsigned int pin;
-+ u32 reg;
-+ u32 mask;
-+};
-+
-+/**
-+ * struct gemini_pmx - state holder for the gemini pin controller
- * @dev: a pointer back to containing device
- * @virtbase: the offset to the controller in virtual memory
- * @map: regmap to access registers
-@@ -31,6 +44,8 @@
- * @is_3516: whether the SoC/package is the 3516 variant
- * @flash_pin: whether the flash pin (extended pins for parallel
- * flash) is set
-+ * @confs: pin config information
-+ * @nconfs: number of pin config information items
- */
- struct gemini_pmx {
- struct device *dev;
-@@ -39,6 +54,8 @@ struct gemini_pmx {
- bool is_3512;
- bool is_3516;
- bool flash_pin;
-+ const struct gemini_pin_conf *confs;
-+ unsigned int nconfs;
- };
-
- /**
-@@ -59,6 +76,13 @@ struct gemini_pin_group {
- u32 value;
- };
-
-+/* Some straight-forward control registers */
-+#define GLOBAL_WORD_ID 0x00
-+#define GLOBAL_STATUS 0x04
-+#define GLOBAL_STATUS_FLPIN BIT(20)
-+#define GLOBAL_GMAC_CTRL_SKEW 0x1c
-+#define GLOBAL_GMAC0_DATA_SKEW 0x20
-+#define GLOBAL_GMAC1_DATA_SKEW 0x24
- /*
- * Global Miscellaneous Control Register
- * This register controls all Gemini pad/pin multiplexing
-@@ -71,9 +95,6 @@ struct gemini_pin_group {
- * DISABLED again. So you select a flash configuration once, and then
- * you are stuck with it.
- */
--#define GLOBAL_WORD_ID 0x00
--#define GLOBAL_STATUS 0x04
--#define GLOBAL_STATUS_FLPIN BIT(20)
- #define GLOBAL_MISC_CTRL 0x30
- #define TVC_CLK_PAD_ENABLE BIT(20)
- #define PCI_CLK_PAD_ENABLE BIT(17)
-@@ -1953,7 +1974,7 @@ static const struct pinctrl_ops gemini_p
- .get_group_name = gemini_get_group_name,
- .get_group_pins = gemini_get_group_pins,
- .pin_dbg_show = gemini_pin_dbg_show,
-- .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
- .dt_free_map = pinconf_generic_dt_free_map,
- };
-
-@@ -2232,10 +2253,155 @@ static const struct pinmux_ops gemini_pm
- .set_mux = gemini_pmx_set_mux,
- };
-
-+#define GEMINI_CFGPIN(_n, _r, _lb, _hb) { \
-+ .pin = _n, \
-+ .reg = _r, \
-+ .mask = GENMASK(_hb, _lb) \
-+}
-+
-+static const struct gemini_pin_conf gemini_confs_3512[] = {
-+ GEMINI_CFGPIN(259, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */
-+ GEMINI_CFGPIN(277, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */
-+ GEMINI_CFGPIN(241, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */
-+ GEMINI_CFGPIN(312, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */
-+ GEMINI_CFGPIN(298, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */
-+ GEMINI_CFGPIN(280, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */
-+ GEMINI_CFGPIN(316, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */
-+ GEMINI_CFGPIN(243, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */
-+ GEMINI_CFGPIN(295, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */
-+ GEMINI_CFGPIN(313, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */
-+ GEMINI_CFGPIN(242, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */
-+ GEMINI_CFGPIN(260, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */
-+ GEMINI_CFGPIN(294, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */
-+ GEMINI_CFGPIN(276, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */
-+ GEMINI_CFGPIN(258, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */
-+ GEMINI_CFGPIN(240, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */
-+ GEMINI_CFGPIN(262, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */
-+ GEMINI_CFGPIN(244, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */
-+ GEMINI_CFGPIN(317, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */
-+ GEMINI_CFGPIN(299, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */
-+ GEMINI_CFGPIN(261, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */
-+ GEMINI_CFGPIN(279, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */
-+ GEMINI_CFGPIN(297, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */
-+ GEMINI_CFGPIN(315, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */
-+};
-+
-+static const struct gemini_pin_conf gemini_confs_3516[] = {
-+ GEMINI_CFGPIN(347, GLOBAL_GMAC_CTRL_SKEW, 0, 3), /* GMAC0 RXDV */
-+ GEMINI_CFGPIN(386, GLOBAL_GMAC_CTRL_SKEW, 4, 7), /* GMAC0 RXC */
-+ GEMINI_CFGPIN(307, GLOBAL_GMAC_CTRL_SKEW, 8, 11), /* GMAC0 TXEN */
-+ GEMINI_CFGPIN(327, GLOBAL_GMAC_CTRL_SKEW, 12, 15), /* GMAC0 TXC */
-+ GEMINI_CFGPIN(309, GLOBAL_GMAC_CTRL_SKEW, 16, 19), /* GMAC1 RXDV */
-+ GEMINI_CFGPIN(390, GLOBAL_GMAC_CTRL_SKEW, 20, 23), /* GMAC1 RXC */
-+ GEMINI_CFGPIN(370, GLOBAL_GMAC_CTRL_SKEW, 24, 27), /* GMAC1 TXEN */
-+ GEMINI_CFGPIN(350, GLOBAL_GMAC_CTRL_SKEW, 28, 31), /* GMAC1 TXC */
-+ GEMINI_CFGPIN(367, GLOBAL_GMAC0_DATA_SKEW, 0, 3), /* GMAC0 RXD0 */
-+ GEMINI_CFGPIN(348, GLOBAL_GMAC0_DATA_SKEW, 4, 7), /* GMAC0 RXD1 */
-+ GEMINI_CFGPIN(387, GLOBAL_GMAC0_DATA_SKEW, 8, 11), /* GMAC0 RXD2 */
-+ GEMINI_CFGPIN(328, GLOBAL_GMAC0_DATA_SKEW, 12, 15), /* GMAC0 RXD3 */
-+ GEMINI_CFGPIN(306, GLOBAL_GMAC0_DATA_SKEW, 16, 19), /* GMAC0 TXD0 */
-+ GEMINI_CFGPIN(325, GLOBAL_GMAC0_DATA_SKEW, 20, 23), /* GMAC0 TXD1 */
-+ GEMINI_CFGPIN(346, GLOBAL_GMAC0_DATA_SKEW, 24, 27), /* GMAC0 TXD2 */
-+ GEMINI_CFGPIN(326, GLOBAL_GMAC0_DATA_SKEW, 28, 31), /* GMAC0 TXD3 */
-+ GEMINI_CFGPIN(391, GLOBAL_GMAC1_DATA_SKEW, 0, 3), /* GMAC1 RXD0 */
-+ GEMINI_CFGPIN(351, GLOBAL_GMAC1_DATA_SKEW, 4, 7), /* GMAC1 RXD1 */
-+ GEMINI_CFGPIN(310, GLOBAL_GMAC1_DATA_SKEW, 8, 11), /* GMAC1 RXD2 */
-+ GEMINI_CFGPIN(371, GLOBAL_GMAC1_DATA_SKEW, 12, 15), /* GMAC1 RXD3 */
-+ GEMINI_CFGPIN(329, GLOBAL_GMAC1_DATA_SKEW, 16, 19), /* GMAC1 TXD0 */
-+ GEMINI_CFGPIN(389, GLOBAL_GMAC1_DATA_SKEW, 20, 23), /* GMAC1 TXD1 */
-+ GEMINI_CFGPIN(369, GLOBAL_GMAC1_DATA_SKEW, 24, 27), /* GMAC1 TXD2 */
-+ GEMINI_CFGPIN(308, GLOBAL_GMAC1_DATA_SKEW, 28, 31), /* GMAC1 TXD3 */
-+};
-+
-+static const struct gemini_pin_conf *gemini_get_pin_conf(struct gemini_pmx *pmx,
-+ unsigned int pin)
-+{
-+ const struct gemini_pin_conf *retconf;
-+ int i;
-+
-+ for (i = 0; i < pmx->nconfs; i++) {
-+ retconf = &gemini_confs_3516[i];
-+ if (retconf->pin == pin)
-+ return retconf;
-+ }
-+ return NULL;
-+}
-+
-+static int gemini_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
-+ unsigned long *config)
-+{
-+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-+ enum pin_config_param param = pinconf_to_config_param(*config);
-+ const struct gemini_pin_conf *conf;
-+ u32 val;
-+
-+ switch (param) {
-+ case PIN_CONFIG_SKEW_DELAY:
-+ conf = gemini_get_pin_conf(pmx, pin);
-+ if (!conf)
-+ return -ENOTSUPP;
-+ regmap_read(pmx->map, conf->reg, &val);
-+ val &= conf->mask;
-+ val >>= (ffs(conf->mask) - 1);
-+ *config = pinconf_to_config_packed(PIN_CONFIG_SKEW_DELAY, val);
-+ break;
-+ default:
-+ return -ENOTSUPP;
-+ }
-+
-+ return 0;
-+}
-+
-+static int gemini_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-+ unsigned long *configs, unsigned int num_configs)
-+{
-+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-+ const struct gemini_pin_conf *conf;
-+ enum pin_config_param param;
-+ u32 arg;
-+ int ret = 0;
-+ int i;
-+
-+ for (i = 0; i < num_configs; i++) {
-+ param = pinconf_to_config_param(configs[i]);
-+ arg = pinconf_to_config_argument(configs[i]);
-+
-+ switch (param) {
-+ case PIN_CONFIG_SKEW_DELAY:
-+ if (arg > 0xf)
-+ return -EINVAL;
-+ conf = gemini_get_pin_conf(pmx, pin);
-+ if (!conf) {
-+ dev_err(pmx->dev,
-+ "invalid pin for skew delay %d\n", pin);
-+ return -ENOTSUPP;
-+ }
-+ arg <<= (ffs(conf->mask) - 1);
-+ dev_dbg(pmx->dev,
-+ "set pin %d to skew delay mask %08x, val %08x\n",
-+ pin, conf->mask, arg);
-+ regmap_update_bits(pmx->map, conf->reg, conf->mask, arg);
-+ break;
-+ default:
-+ dev_err(pmx->dev, "Invalid config param %04x\n", param);
-+ return -ENOTSUPP;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static const struct pinconf_ops gemini_pinconf_ops = {
-+ .pin_config_get = gemini_pinconf_get,
-+ .pin_config_set = gemini_pinconf_set,
-+ .is_generic = true,
-+};
-+
- static struct pinctrl_desc gemini_pmx_desc = {
- .name = DRIVER_NAME,
- .pctlops = &gemini_pctrl_ops,
- .pmxops = &gemini_pmx_ops,
-+ .confops = &gemini_pinconf_ops,
- .owner = THIS_MODULE,
- };
-
-@@ -2278,11 +2444,15 @@ static int gemini_pmx_probe(struct platf
- val &= 0xffff;
- if (val == 0x3512) {
- pmx->is_3512 = true;
-+ pmx->confs = gemini_confs_3512;
-+ pmx->nconfs = ARRAY_SIZE(gemini_confs_3512);
- gemini_pmx_desc.pins = gemini_3512_pins;
- gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3512_pins);
- dev_info(dev, "detected 3512 chip variant\n");
- } else if (val == 0x3516) {
- pmx->is_3516 = true;
-+ pmx->confs = gemini_confs_3516;
-+ pmx->nconfs = ARRAY_SIZE(gemini_confs_3516);
- gemini_pmx_desc.pins = gemini_3516_pins;
- gemini_pmx_desc.npins = ARRAY_SIZE(gemini_3516_pins);
- dev_info(dev, "detected 3516 chip variant\n");
diff --git a/target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch b/target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch
deleted file mode 100644
index 4a4dae34ca..0000000000
--- a/target/linux/gemini/patches-4.14/0007-pinctrl-gemini-Fix-GMAC-groups.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From e7759c44e0c20dd6b5a259300acdc7350ea6dd32 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 6 Nov 2017 21:27:34 +0100
-Subject: [PATCH 07/31] pinctrl: gemini: Fix GMAC groups
-
-The GMII groups need to be split across GMAC0 and GMAC1 since
-GMAC0 is always available but GMAC1 masks GPIO2 lines 0-7
-so we might want just one interface out.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 79 +++++++++++++++++++++++++++-------------
- 1 file changed, 54 insertions(+), 25 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -96,6 +96,13 @@ struct gemini_pin_group {
- * you are stuck with it.
- */
- #define GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_GMAC_IOSEL_MASK GENMASK(28, 27)
-+/* Not really used */
-+#define GEMINI_GMAC_IOSEL_GMAC0_GMII BIT(28)
-+/* Activated with GMAC1 */
-+#define GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII BIT(27)
-+/* This will be the default */
-+#define GEMINI_GMAC_IOSEL_GMAC0_RGMII_GMAC1_GPIO2 0
- #define TVC_CLK_PAD_ENABLE BIT(20)
- #define PCI_CLK_PAD_ENABLE BIT(17)
- #define LPC_CLK_PAD_ENABLE BIT(16)
-@@ -109,8 +116,8 @@ struct gemini_pin_group {
- #define NAND_PADS_DISABLE BIT(2)
- #define PFLASH_PADS_DISABLE BIT(1)
- #define SFLASH_PADS_DISABLE BIT(0)
--#define PADS_MASK (GENMASK(9, 0) | BIT(16) | BIT(17) | BIT(20))
--#define PADS_MAXBIT 20
-+#define PADS_MASK (GENMASK(9, 0) | BIT(16) | BIT(17) | BIT(20) | BIT(27))
-+#define PADS_MAXBIT 27
-
- /* Ordered by bit index */
- static const char * const gemini_padgroups[] = {
-@@ -516,9 +523,12 @@ static const unsigned int usb_3512_pins[
- };
-
- /* GMII, ethernet pins */
--static const unsigned int gmii_3512_pins[] = {
-- 311, 240, 258, 276, 294, 312, 241, 259, 277, 295, 313, 242, 260, 278, 296,
-- 315, 297, 279, 261, 243, 316, 298, 280, 262, 244, 317, 299, 281
-+static const unsigned int gmii_gmac0_3512_pins[] = {
-+ 240, 241, 242, 258, 259, 260, 276, 277, 278, 294, 295, 311, 312, 313
-+};
-+
-+static const unsigned int gmii_gmac1_3512_pins[] = {
-+ 243, 244, 261, 262, 279, 280, 281, 296, 297, 298, 299, 315, 316, 317
- };
-
- static const unsigned int pci_3512_pins[] = {
-@@ -671,10 +681,10 @@ static const unsigned int gpio1c_3512_pi
- /* The GPIO1D (28-31) pins overlap with LCD and TVC */
- static const unsigned int gpio1d_3512_pins[] = { 246, 319, 301, 283 };
-
--/* The GPIO2A (0-3) pins overlap with GMII and extended parallel flash */
-+/* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */
- static const unsigned int gpio2a_3512_pins[] = { 315, 297, 279, 261 };
-
--/* The GPIO2B (4-7) pins overlap with GMII, extended parallel flash and LCD */
-+/* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */
- static const unsigned int gpio2b_3512_pins[] = { 262, 244, 317, 299 };
-
- /* The GPIO2C (8-31) pins overlap with PCI */
-@@ -741,9 +751,16 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(usb_3512_pins),
- },
- {
-- .name = "gmiigrp",
-- .pins = gmii_3512_pins,
-- .num_pins = ARRAY_SIZE(gmii_3512_pins),
-+ .name = "gmii_gmac0_grp",
-+ .pins = gmii_gmac0_3512_pins,
-+ .num_pins = ARRAY_SIZE(gmii_gmac0_3512_pins),
-+ },
-+ {
-+ .name = "gmii_gmac1_grp",
-+ .pins = gmii_gmac1_3512_pins,
-+ .num_pins = ARRAY_SIZE(gmii_gmac1_3512_pins),
-+ /* Bring out RGMII on the GMAC1 pins */
-+ .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
- },
- {
- .name = "pcigrp",
-@@ -963,14 +980,15 @@ static const struct gemini_pin_group gem
- .name = "gpio2agrp",
- .pins = gpio2a_3512_pins,
- .num_pins = ARRAY_SIZE(gpio2a_3512_pins),
-- /* Conflict with GMII and extended parallel flash */
-+ .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
-+ /* Conflict with GMII GMAC1 and extended parallel flash */
- },
- {
- .name = "gpio2bgrp",
- .pins = gpio2b_3512_pins,
- .num_pins = ARRAY_SIZE(gpio2b_3512_pins),
-- /* Conflict with GMII, extended parallel flash and LCD */
-- .mask = LCD_PADS_ENABLE,
-+ /* Conflict with GMII GMAC1, extended parallel flash and LCD */
-+ .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
- },
- {
- .name = "gpio2cgrp",
-@@ -1450,9 +1468,12 @@ static const unsigned int usb_3516_pins[
- };
-
- /* GMII, ethernet pins */
--static const unsigned int gmii_3516_pins[] = {
-- 306, 307, 308, 309, 310, 325, 326, 327, 328, 329, 330, 345, 346, 347,
-- 348, 349, 350, 351, 367, 368, 369, 370, 371, 386, 387, 389, 390, 391
-+static const unsigned int gmii_gmac0_3516_pins[] = {
-+ 306, 307, 325, 326, 327, 328, 345, 346, 347, 348, 367, 368, 386, 387
-+};
-+
-+static const unsigned int gmii_gmac1_3516_pins[] = {
-+ 308, 309, 310, 329, 330, 349, 350, 351, 369, 370, 371, 389, 390, 391
- };
-
- static const unsigned int pci_3516_pins[] = {
-@@ -1600,10 +1621,10 @@ static const unsigned int gpio1c_3516_pi
- /* The GPIO1D (28-31) pins overlap with TVC */
- static const unsigned int gpio1d_3516_pins[] = { 353, 311, 394, 374 };
-
--/* The GPIO2A (0-3) pins overlap with GMII and extended parallel flash */
-+/* The GPIO2A (0-3) pins overlap with GMII GMAC1 and extended parallel flash */
- static const unsigned int gpio2a_3516_pins[] = { 308, 369, 389, 329 };
-
--/* The GPIO2B (4-7) pins overlap with GMII, extended parallel flash and LCD */
-+/* The GPIO2B (4-7) pins overlap with GMII GMAC1, extended parallel flash and LCD */
- static const unsigned int gpio2b_3516_pins[] = { 391, 351, 310, 371 };
-
- /* The GPIO2C (8-31) pins overlap with PCI */
-@@ -1675,9 +1696,16 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(usb_3516_pins),
- },
- {
-- .name = "gmiigrp",
-- .pins = gmii_3516_pins,
-- .num_pins = ARRAY_SIZE(gmii_3516_pins),
-+ .name = "gmii_gmac0_grp",
-+ .pins = gmii_gmac0_3516_pins,
-+ .num_pins = ARRAY_SIZE(gmii_gmac0_3516_pins),
-+ },
-+ {
-+ .name = "gmii_gmac1_grp",
-+ .pins = gmii_gmac1_3516_pins,
-+ .num_pins = ARRAY_SIZE(gmii_gmac1_3516_pins),
-+ /* Bring out RGMII on the GMAC1 pins */
-+ .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
- },
- {
- .name = "pcigrp",
-@@ -1889,14 +1917,15 @@ static const struct gemini_pin_group gem
- .name = "gpio2agrp",
- .pins = gpio2a_3516_pins,
- .num_pins = ARRAY_SIZE(gpio2a_3516_pins),
-- /* Conflict with GMII and extended parallel flash */
-+ .mask = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
-+ /* Conflict with GMII GMAC1 and extended parallel flash */
- },
- {
- .name = "gpio2bgrp",
- .pins = gpio2b_3516_pins,
- .num_pins = ARRAY_SIZE(gpio2b_3516_pins),
-- /* Conflict with GMII, extended parallel flash and LCD */
-- .mask = LCD_PADS_ENABLE,
-+ /* Conflict with GMII GMAC1, extended parallel flash and LCD */
-+ .mask = LCD_PADS_ENABLE | GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
- },
- {
- .name = "gpio2cgrp",
-@@ -1999,7 +2028,7 @@ static const char * const icegrps[] = {
- static const char * const idegrps[] = { "idegrp" };
- static const char * const satagrps[] = { "satagrp" };
- static const char * const usbgrps[] = { "usbgrp" };
--static const char * const gmiigrps[] = { "gmiigrp" };
-+static const char * const gmiigrps[] = { "gmii_gmac0_grp", "gmii_gmac1_grp" };
- static const char * const pcigrps[] = { "pcigrp" };
- static const char * const lpcgrps[] = { "lpcgrp" };
- static const char * const lcdgrps[] = { "lcdgrp" };
diff --git a/target/linux/gemini/patches-4.14/0008-pinctrl-gemini-Fix-missing-pad-descriptions.patch b/target/linux/gemini/patches-4.14/0008-pinctrl-gemini-Fix-missing-pad-descriptions.patch
deleted file mode 100644
index 2d7ed83045..0000000000
--- a/target/linux/gemini/patches-4.14/0008-pinctrl-gemini-Fix-missing-pad-descriptions.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 3f2941cb12a6d6a0ef4e53e0ecb8d2431d352964 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 13 Nov 2017 22:36:12 +0100
-Subject: [PATCH 08/31] pinctrl: gemini: Fix missing pad descriptions
-
-A pretty clever static checker found a bug in my patch: I added more
-bits to a bitmask but didn't extend the array indexed to the same
-bitmask.
-
-Fixes: 756a024f3983 ("pinctrl: gemini: Fix GMAC groups")
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -136,6 +136,8 @@ static const char * const gemini_padgrou
- "PCI CLK",
- NULL, NULL,
- "TVC CLK",
-+ NULL, NULL, NULL, NULL, NULL,
-+ "GMAC1",
- };
-
- static const struct pinctrl_pin_desc gemini_3512_pins[] = {
diff --git a/target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch b/target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch
deleted file mode 100644
index dfb93f6ade..0000000000
--- a/target/linux/gemini/patches-4.14/0009-pinctrl-gemini-Add-two-missing-GPIO-groups.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From c25653d045ce86c5ae472258fdaa39a6baaf75eb Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 19 Nov 2017 10:57:27 +0100
-Subject: [PATCH 09/31] pinctrl: gemini: Add two missing GPIO groups
-
-The 3512 has two more GPIO groups on GPIO area 0, so let's
-make it possible to combine these with the function.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2043,7 +2043,8 @@ static const char * const sflashgrps[] =
- static const char * const gpio0grps[] = { "gpio0agrp", "gpio0bgrp", "gpio0cgrp",
- "gpio0dgrp", "gpio0egrp", "gpio0fgrp",
- "gpio0ggrp", "gpio0hgrp", "gpio0igrp",
-- "gpio0jgrp", "gpio0kgrp" };
-+ "gpio0jgrp", "gpio0kgrp", "gpio0lgrp",
-+ "gpio0mgrp" };
- static const char * const gpio1grps[] = { "gpio1agrp", "gpio1bgrp", "gpio1cgrp",
- "gpio1dgrp" };
- static const char * const gpio2grps[] = { "gpio2agrp", "gpio2bgrp", "gpio2cgrp" };
diff --git a/target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch b/target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch
deleted file mode 100644
index f01edb9bff..0000000000
--- a/target/linux/gemini/patches-4.14/0010-pinctrl-gemini-Fix-usage-of-3512-groups.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 88a5c6ad311588f178c5a88e4eeacc6d40b8ede3 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 22 Nov 2017 21:04:14 +0100
-Subject: [PATCH 10/31] pinctrl: gemini: Fix usage of 3512 groups
-
-The pin config lookup function was still hardcoding the
-3516 pin set, which is obviously wrong. Use the pointer
-in the state container.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2352,7 +2352,7 @@ static const struct gemini_pin_conf *gem
- int i;
-
- for (i = 0; i < pmx->nconfs; i++) {
-- retconf = &gemini_confs_3516[i];
-+ retconf = &pmx->confs[i];
- if (retconf->pin == pin)
- return retconf;
- }
diff --git a/target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch b/target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch
deleted file mode 100644
index e6d153403e..0000000000
--- a/target/linux/gemini/patches-4.14/0011-pinctrl-gemini-Support-drive-strength-setting.patch
+++ /dev/null
@@ -1,198 +0,0 @@
-From f147cf49ef39f5e87d5df9ef1fab52683bc75c63 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 2 Dec 2017 12:23:09 +0100
-Subject: [PATCH 11/31] pinctrl: gemini: Support drive strength setting
-
-The Gemini pin controller can set drive strength for a few
-select groups of pins (not individually). Implement this
-for GMAC0 and 1 (ethernet ports), IDE and PCI.
-
-Cc: devicetree@vger.kernel.org
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../bindings/pinctrl/cortina,gemini-pinctrl.txt | 3 +
- drivers/pinctrl/pinctrl-gemini.c | 81 ++++++++++++++++++++++
- 2 files changed, 84 insertions(+)
-
---- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
-+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
-@@ -17,6 +17,9 @@ and generic pin config nodes.
-
- Supported configurations:
- - skew-delay is supported on the Ethernet pins
-+- drive-strength with 4, 8, 12 or 16 mA as argument is supported for
-+ entire groups on the groups "idegrp", "gmii_gmac0_grp", "gmii_gmac1_grp"
-+ and "pcigrp".
-
- Example:
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -67,6 +67,9 @@ struct gemini_pmx {
- * elements in .pins so we can iterate over that array
- * @mask: bits to clear to enable this when doing pin muxing
- * @value: bits to set to enable this when doing pin muxing
-+ * @driving_mask: bitmask for the IO Pad driving register for this
-+ * group, if it supports altering the driving strength of
-+ * its lines.
- */
- struct gemini_pin_group {
- const char *name;
-@@ -74,12 +77,14 @@ struct gemini_pin_group {
- const unsigned int num_pins;
- u32 mask;
- u32 value;
-+ u32 driving_mask;
- };
-
- /* Some straight-forward control registers */
- #define GLOBAL_WORD_ID 0x00
- #define GLOBAL_STATUS 0x04
- #define GLOBAL_STATUS_FLPIN BIT(20)
-+#define GLOBAL_IODRIVE 0x10
- #define GLOBAL_GMAC_CTRL_SKEW 0x1c
- #define GLOBAL_GMAC0_DATA_SKEW 0x20
- #define GLOBAL_GMAC1_DATA_SKEW 0x24
-@@ -741,6 +746,7 @@ static const struct gemini_pin_group gem
- /* Conflict with all flash usage */
- .value = IDE_PADS_ENABLE | NAND_PADS_DISABLE |
- PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE,
-+ .driving_mask = GENMASK(21, 20),
- },
- {
- .name = "satagrp",
-@@ -756,6 +762,7 @@ static const struct gemini_pin_group gem
- .name = "gmii_gmac0_grp",
- .pins = gmii_gmac0_3512_pins,
- .num_pins = ARRAY_SIZE(gmii_gmac0_3512_pins),
-+ .driving_mask = GENMASK(17, 16),
- },
- {
- .name = "gmii_gmac1_grp",
-@@ -763,6 +770,7 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(gmii_gmac1_3512_pins),
- /* Bring out RGMII on the GMAC1 pins */
- .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
-+ .driving_mask = GENMASK(19, 18),
- },
- {
- .name = "pcigrp",
-@@ -770,6 +778,7 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(pci_3512_pins),
- /* Conflict only with GPIO2 */
- .value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE,
-+ .driving_mask = GENMASK(23, 22),
- },
- {
- .name = "lpcgrp",
-@@ -1686,6 +1695,7 @@ static const struct gemini_pin_group gem
- /* Conflict with all flash usage */
- .value = IDE_PADS_ENABLE | NAND_PADS_DISABLE |
- PFLASH_PADS_DISABLE | SFLASH_PADS_DISABLE,
-+ .driving_mask = GENMASK(21, 20),
- },
- {
- .name = "satagrp",
-@@ -1701,6 +1711,7 @@ static const struct gemini_pin_group gem
- .name = "gmii_gmac0_grp",
- .pins = gmii_gmac0_3516_pins,
- .num_pins = ARRAY_SIZE(gmii_gmac0_3516_pins),
-+ .driving_mask = GENMASK(17, 16),
- },
- {
- .name = "gmii_gmac1_grp",
-@@ -1708,6 +1719,7 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(gmii_gmac1_3516_pins),
- /* Bring out RGMII on the GMAC1 pins */
- .value = GEMINI_GMAC_IOSEL_GMAC0_GMAC1_RGMII,
-+ .driving_mask = GENMASK(19, 18),
- },
- {
- .name = "pcigrp",
-@@ -1715,6 +1727,7 @@ static const struct gemini_pin_group gem
- .num_pins = ARRAY_SIZE(pci_3516_pins),
- /* Conflict only with GPIO2 */
- .value = PCI_PADS_ENABLE | PCI_CLK_PAD_ENABLE,
-+ .driving_mask = GENMASK(23, 22),
- },
- {
- .name = "lpcgrp",
-@@ -2423,9 +2436,77 @@ static int gemini_pinconf_set(struct pin
- return ret;
- }
-
-+static int gemini_pinconf_group_set(struct pinctrl_dev *pctldev,
-+ unsigned selector,
-+ unsigned long *configs,
-+ unsigned num_configs)
-+{
-+ struct gemini_pmx *pmx = pinctrl_dev_get_drvdata(pctldev);
-+ const struct gemini_pin_group *grp = NULL;
-+ enum pin_config_param param;
-+ u32 arg;
-+ u32 val;
-+ int i;
-+
-+ if (pmx->is_3512)
-+ grp = &gemini_3512_pin_groups[selector];
-+ if (pmx->is_3516)
-+ grp = &gemini_3516_pin_groups[selector];
-+
-+ /* First figure out if this group supports configs */
-+ if (!grp->driving_mask) {
-+ dev_err(pmx->dev, "pin config group \"%s\" does "
-+ "not support drive strength setting\n",
-+ grp->name);
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < num_configs; i++) {
-+ param = pinconf_to_config_param(configs[i]);
-+ arg = pinconf_to_config_argument(configs[i]);
-+
-+ switch (param) {
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ switch (arg) {
-+ case 4:
-+ val = 0;
-+ break;
-+ case 8:
-+ val = 1;
-+ break;
-+ case 12:
-+ val = 2;
-+ break;
-+ case 16:
-+ val = 3;
-+ break;
-+ default:
-+ dev_err(pmx->dev,
-+ "invalid drive strength %d mA\n",
-+ arg);
-+ return -ENOTSUPP;
-+ }
-+ val <<= (ffs(grp->driving_mask) - 1);
-+ regmap_update_bits(pmx->map, GLOBAL_IODRIVE,
-+ grp->driving_mask,
-+ val);
-+ dev_info(pmx->dev,
-+ "set group %s to %d mA drive strength mask %08x val %08x\n",
-+ grp->name, arg, grp->driving_mask, val);
-+ break;
-+ default:
-+ dev_err(pmx->dev, "invalid config param %04x\n", param);
-+ return -ENOTSUPP;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
- static const struct pinconf_ops gemini_pinconf_ops = {
- .pin_config_get = gemini_pinconf_get,
- .pin_config_set = gemini_pinconf_set,
-+ .pin_config_group_set = gemini_pinconf_group_set,
- .is_generic = true,
- };
-
diff --git a/target/linux/gemini/patches-4.14/0012-ARM-dts-Add-ethernet-PHYs-to-the-a-bunch-of-Geminis.patch b/target/linux/gemini/patches-4.14/0012-ARM-dts-Add-ethernet-PHYs-to-the-a-bunch-of-Geminis.patch
deleted file mode 100644
index 2549ea3151..0000000000
--- a/target/linux/gemini/patches-4.14/0012-ARM-dts-Add-ethernet-PHYs-to-the-a-bunch-of-Geminis.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From f0674df220f3da81c173025636a904b395cf8f8b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 19 Nov 2017 10:46:16 +0100
-Subject: [PATCH 12/31] ARM: dts: Add ethernet PHYs to the a bunch of Geminis
-
-These Gemini boards have Ethernet PHY on GPIO bit-banged
-MDIO, clearly defined in the corresponding OpenWRT
-ethernet patches since ages. Add them in accordance with
-the OpenWRT patch so we can use them when we add ethernet
-support.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-nas4220b.dts | 13 +++++++++++++
- arch/arm/boot/dts/gemini-wbd111.dts | 13 +++++++++++++
- arch/arm/boot/dts/gemini-wbd222.dts | 18 ++++++++++++++++++
- 4 files changed, 57 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -64,6 +64,19 @@
- };
- };
-
-+ mdio0: ethernet-phy {
-+ compatible = "virtual,mdio-gpio";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+ };
-+
- soc {
- flash@30000000 {
- status = "okay";
---- a/arch/arm/boot/dts/gemini-wbd111.dts
-+++ b/arch/arm/boot/dts/gemini-wbd111.dts
-@@ -69,6 +69,19 @@
- };
- };
-
-+ mdio0: ethernet-phy {
-+ compatible = "virtual,mdio-gpio";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+ };
-+
- soc {
- flash@30000000 {
- status = "okay";
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -69,6 +69,24 @@
- };
- };
-
-+ mdio0: ethernet-phy {
-+ compatible = "virtual,mdio-gpio";
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+
-+ phy1: ethernet-phy@3 {
-+ reg = <3>;
-+ device_type = "ethernet-phy";
-+ };
-+ };
-+
- soc {
- flash@30000000 {
- status = "okay";
diff --git a/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch b/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch
deleted file mode 100644
index 3d2f4ed8a9..0000000000
--- a/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch
+++ /dev/null
@@ -1,272 +0,0 @@
-From 2f08de94f207a4347053e1faa22c9a310c9c61b0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 17 Nov 2017 16:36:32 +0100
-Subject: [PATCH 13/31] ARM: dts: Add basic devicetree for D-Link DNS-313
-
-This adds a basic device tree for the D-Link DNS-313
-NAS enclosure. This device has a thermal sensor and a
-fan so we add a thermal zone for the chassis in the
-device tree based on information from the product.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 241 +++++++++++++++++++++++++++++
- 2 files changed, 242 insertions(+)
- create mode 100644 arch/arm/boot/dts/gemini-dlink-dns-313.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -185,6 +185,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
- exynos5800-peach-pi.dtb
- dtb-$(CONFIG_ARCH_GEMINI) += \
- gemini-dlink-dir-685.dtb \
-+ gemini-dlink-dns-313.dtb \
- gemini-nas4220b.dtb \
- gemini-rut1xx.dtb \
- gemini-sq201.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -0,0 +1,241 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
-+ */
-+
-+/dts-v1/;
-+
-+#include "gemini.dtsi"
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/thermal/thermal.h>
-+
-+/ {
-+ model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
-+ compatible = "dlink,dns-313", "cortina,gemini";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ memory {
-+ /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
-+ device_type = "memory";
-+ reg = <0x00000000 0x4000000>;
-+ };
-+
-+ aliases {
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ stdout-path = "uart0:19200n8";
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ button-esc {
-+ debounce_interval = <50>;
-+ wakeup-source;
-+ linux,code = <KEY_ESC>;
-+ label = "reset";
-+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ led-power {
-+ label = "dns313:blue:power";
-+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+ led-disk-blue {
-+ label = "dns313:blue:disk";
-+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-+ default-state = "off";
-+ };
-+ led-disk-green {
-+ label = "dns313:green:disk";
-+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-+ default-state = "off";
-+ linux,default-trigger = "ide-disk";
-+ /* Ideally should activate while reading */
-+ };
-+ led-disk-red {
-+ label = "dns313:red:disk";
-+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-+ default-state = "off";
-+ /* Ideally should activate while writing */
-+ };
-+ };
-+
-+ /*
-+ * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
-+ */
-+ fan0: gpio-fan {
-+ compatible = "gpio-fan";
-+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
-+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+ gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
-+ cooling-min-level = <0>;
-+ cooling-max-level = <2>;
-+ #cooling-cells = <2>;
-+ };
-+
-+
-+ /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
-+ gpio-i2c {
-+ compatible = "i2c-gpio";
-+ sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-+ scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ g751: temperature-sensor@48 {
-+ compatible = "gmt,g751";
-+ reg = <0x48>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+ };
-+
-+ thermal-zones {
-+ chassis-thermal {
-+ /* Poll every 20 seconds */
-+ polling-delay = <20000>;
-+ /* Poll every 2nd second when cooling */
-+ polling-delay-passive = <2000>;
-+
-+ thermal-sensors = <&g751>;
-+
-+ /* Tripping points from the fan.script in the rootfs */
-+ trips {
-+ chassis_alert0: chassis-alert0 {
-+ /* At 43 degrees turn on low speed */
-+ temperature = <43000>;
-+ hysteresis = <3000>;
-+ type = "active";
-+ };
-+ chassis_alert1: chassis-alert1 {
-+ /* At 47 degrees turn on high speed */
-+ temperature = <47000>;
-+ hysteresis = <3000>;
-+ type = "active";
-+ };
-+ chassis_crit: chassis-crit {
-+ /* Just shut down at 60 degrees */
-+ temperature = <60000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ map0 {
-+ trip = <&chassis_alert0>;
-+ cooling-device = <&fan0 1 1>;
-+ };
-+ map1 {
-+ trip = <&chassis_alert1>;
-+ cooling-device = <&fan0 2 2>;
-+ };
-+ };
-+ };
-+ };
-+
-+ mdio0: ethernet-phy {
-+ compatible = "virtual,mdio-gpio";
-+ /* Uses MDC and MDIO */
-+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* This is a Realtek RTL8211B Gigabit ethernet transceiver */
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+ };
-+
-+ soc {
-+ flash@30000000 {
-+ status = "okay";
-+ /* 512KB of flash */
-+ reg = <0x30000000 0x00080000>;
-+
-+ /*
-+ * This "RedBoot" is the Storlink derivative.
-+ */
-+ partition@0 {
-+ label = "RedBoot";
-+ reg = <0x00000000 0x00040000>;
-+ read-only;
-+ };
-+ partition@40000 {
-+ label = "MTD1";
-+ reg = <0x00040000 0x00020000>;
-+ read-only;
-+ };
-+ partition@60000 {
-+ label = "MTD2";
-+ reg = <0x00060000 0x00020000>;
-+ read-only;
-+ };
-+ };
-+
-+ syscon: syscon@40000000 {
-+ pinctrl {
-+ /*
-+ */
-+ gpio0_default_pins: pinctrl-gpio0 {
-+ mux {
-+ function = "gpio0";
-+ groups =
-+ /* Used by LEDs conflicts ICE */
-+ "gpio0bgrp",
-+ /* Used by ? conflicts ICE */
-+ "gpio0cgrp",
-+ /*
-+ * Used by fan & G751, conflicts LPC,
-+ * UART modem lines, SSP
-+ */
-+ "gpio0egrp",
-+ /* Used by G751 */
-+ "gpio0fgrp",
-+ /* Used by MDIO */
-+ "gpio0igrp";
-+ };
-+ };
-+ gpio1_default_pins: pinctrl-gpio1 {
-+ mux {
-+ function = "gpio1";
-+ /* Used by "reset" button */
-+ groups = "gpio1dgrp";
-+ };
-+ };
-+ };
-+ };
-+
-+ sata: sata@46000000 {
-+ /* The ROM uses this muxmode */
-+ cortina,gemini-ata-muxmode = <3>;
-+ cortina,gemini-enable-sata-bridge;
-+ status = "okay";
-+ };
-+
-+ gpio0: gpio@4d000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio0_default_pins>;
-+ };
-+
-+ gpio1: gpio@4e000000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gpio1_default_pins>;
-+ };
-+
-+ ata@63000000 {
-+ status = "okay";
-+ };
-+ };
-+};
diff --git a/target/linux/gemini/patches-4.14/0014-ARM-dts-Flags-D-Link-DIR-685-I2C-bus-gpios.patch b/target/linux/gemini/patches-4.14/0014-ARM-dts-Flags-D-Link-DIR-685-I2C-bus-gpios.patch
deleted file mode 100644
index 5cefd18aa9..0000000000
--- a/target/linux/gemini/patches-4.14/0014-ARM-dts-Flags-D-Link-DIR-685-I2C-bus-gpios.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From eed839dc713fdb7b2579dbfea41d676386b8259b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 10 Sep 2017 20:02:33 +0200
-Subject: [PATCH 14/31] ARM: dts: Flags D-Link DIR-685 I2C bus gpios
-
-These GPIOs are used in open drain mode, so make sure to
-flag them as such. Use the new separate scl/sda line
-GPIO bindings.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -99,8 +99,8 @@
- gpio-i2c {
- compatible = "i2c-gpio";
- /* Collides with ICE */
-- gpios = <&gpio0 5 0>, /* SDA */
-- <&gpio0 6 0>; /* SCL */
-+ sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-+ scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- #address-cells = <1>;
- #size-cells = <0>;
-
diff --git a/target/linux/gemini/patches-4.14/0015-ARM-dts-Add-PCI-to-WBD111-and-WBD222.patch b/target/linux/gemini/patches-4.14/0015-ARM-dts-Add-PCI-to-WBD111-and-WBD222.patch
deleted file mode 100644
index 429625ed20..0000000000
--- a/target/linux/gemini/patches-4.14/0015-ARM-dts-Add-PCI-to-WBD111-and-WBD222.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From dec551d2301f71a692ed1729a323c8259d36f849 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 11 Oct 2017 19:49:13 +0200
-Subject: [PATCH 15/31] ARM: dts: Add PCI to WBD111 and WBD222
-
-These two boards have mini-PCI card slots, so enable PCI
-on both of them.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-wbd111.dts | 22 ++++++++++++++++++++++
- arch/arm/boot/dts/gemini-wbd222.dts | 22 ++++++++++++++++++++++
- 2 files changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-wbd111.dts
-+++ b/arch/arm/boot/dts/gemini-wbd111.dts
-@@ -138,5 +138,27 @@
- pinctrl-names = "default";
- pinctrl-0 = <&gpio0_default_pins>;
- };
-+
-+ pci@50000000 {
-+ status = "okay";
-+ interrupt-map-mask = <0xf800 0 0 7>;
-+ interrupt-map =
-+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-+ <0x4800 0 0 2 &pci_intc 1>,
-+ <0x4800 0 0 3 &pci_intc 2>,
-+ <0x4800 0 0 4 &pci_intc 3>,
-+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-+ <0x5000 0 0 2 &pci_intc 2>,
-+ <0x5000 0 0 3 &pci_intc 3>,
-+ <0x5000 0 0 4 &pci_intc 0>,
-+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-+ <0x5800 0 0 2 &pci_intc 3>,
-+ <0x5800 0 0 3 &pci_intc 0>,
-+ <0x5800 0 0 4 &pci_intc 1>,
-+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-+ <0x6000 0 0 2 &pci_intc 0>,
-+ <0x6000 0 0 3 &pci_intc 1>,
-+ <0x6000 0 0 4 &pci_intc 2>;
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -143,5 +143,27 @@
- pinctrl-names = "default";
- pinctrl-0 = <&gpio0_default_pins>;
- };
-+
-+ pci@50000000 {
-+ status = "okay";
-+ interrupt-map-mask = <0xf800 0 0 7>;
-+ interrupt-map =
-+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-+ <0x4800 0 0 2 &pci_intc 1>,
-+ <0x4800 0 0 3 &pci_intc 2>,
-+ <0x4800 0 0 4 &pci_intc 3>,
-+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-+ <0x5000 0 0 2 &pci_intc 2>,
-+ <0x5000 0 0 3 &pci_intc 3>,
-+ <0x5000 0 0 4 &pci_intc 0>,
-+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-+ <0x5800 0 0 2 &pci_intc 3>,
-+ <0x5800 0 0 3 &pci_intc 0>,
-+ <0x5800 0 0 4 &pci_intc 1>,
-+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-+ <0x6000 0 0 2 &pci_intc 0>,
-+ <0x6000 0 0 3 &pci_intc 1>,
-+ <0x6000 0 0 4 &pci_intc 2>;
-+ };
- };
- };
diff --git a/target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch b/target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch
deleted file mode 100644
index b9779370ba..0000000000
--- a/target/linux/gemini/patches-4.14/0016-ARM-dts-Add-TVE-TVC-and-ILI9322-panel-to-DIR-685.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 9d3b968d13ba1eecaf22d5824cf8fd270c061534 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 15 Jul 2017 21:02:06 +0200
-Subject: [PATCH 16/31] ARM: dts: Add TVE/TVC and ILI9322 panel to DIR-685
-
-This adds the TVE200/TVC TV-encoder and the Ilitek ILI9322 panel
-to the DIR-685 device tree.
-
-This brings graphics to this funky router and it is possible to
-even run a console on its tiny screen.
-
-Incidentally this requires us to disable the access to the
-parallel (NOR) flash, as the communication pins to the panel
-are shared with the flash memory.
-
-To access the flash, a separate kernel with the panel disabled
-and the flash enabled should be booted. The pin control selecting
-whether to use the lines cannot be altered at runtime due to
-hardware constraints.
-
-Cc: David Lechner <david@lechnology.com>
-Cc: Stefano Babic <sbabic@denx.de>
-Cc: Ben Dooks <ben.dooks@codethink.co.uk>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 63 +++++++++++++++++++++++++++++-
- 1 file changed, 62 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -45,6 +45,47 @@
- };
- };
-
-+ vdisp: regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "display-power";
-+ regulator-min-microvolt = <3600000>;
-+ regulator-max-microvolt = <3600000>;
-+ /* Collides with LCD E */
-+ gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+
-+ spi {
-+ compatible = "spi-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* Collides with IDE pins, that's cool (we do not use them) */
-+ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-+ gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-+ gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-+ /* Collides with pflash CE1, not so cool */
-+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-+ num-chipselects = <1>;
-+
-+ panel: display@0 {
-+ compatible = "dlink,dir-685-panel", "ilitek,ili9322";
-+ reg = <0>;
-+ /* 50 ns min period = 20 MHz */
-+ spi-max-frequency = <20000000>;
-+ spi-cpol; /* Clock active low */
-+ vcc-supply = <&vdisp>;
-+ iovcc-supply = <&vdisp>;
-+ vci-supply = <&vdisp>;
-+
-+ port {
-+ panel_in: endpoint {
-+ remote-endpoint = <&display_out>;
-+ };
-+ };
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
- led-wps {
-@@ -115,7 +156,16 @@
-
- soc {
- flash@30000000 {
-- status = "okay";
-+ /*
-+ * Flash access is by default disabled, because it
-+ * collides with the Chip Enable signal for the display
-+ * panel, that reuse the parallel flash Chip Select 1
-+ * (CS1). Enabling flash makes graphics stop working.
-+ *
-+ * We might be able to hack around this by letting
-+ * GPIO poke around in the flash controller registers.
-+ */
-+ /* status = "okay"; */
- /* 32MB of flash */
- reg = <0x30000000 0x02000000>;
-
-@@ -238,5 +288,16 @@
- ata@63000000 {
- status = "okay";
- };
-+
-+ display-controller@6a000000 {
-+ status = "okay";
-+
-+ port@0 {
-+ reg = <0>;
-+ display_out: endpoint {
-+ remote-endpoint = <&panel_in>;
-+ };
-+ };
-+ };
- };
- };
diff --git a/target/linux/gemini/patches-4.14/0017-watchdog-gemini-ftwdt010-rename-DT-bindings.patch b/target/linux/gemini/patches-4.14/0017-watchdog-gemini-ftwdt010-rename-DT-bindings.patch
deleted file mode 100644
index 3fe0b8f8ce..0000000000
--- a/target/linux/gemini/patches-4.14/0017-watchdog-gemini-ftwdt010-rename-DT-bindings.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From d73f6cc09bcbe258a72c06899215d1a3e8a7686d Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 16 Oct 2017 22:54:23 +0200
-Subject: [PATCH 17/31] watchdog: gemini/ftwdt010: rename DT bindings
-
-The device tree bindings are in two copies and also should be
-consolidated into a single Faraday Technology FTWDT010
-binding since we uncovered that this IP part is a standard
-IP from Faraday.
-
-Cc: devicetree@vger.kernel.org
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- .../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -----------------
- ...{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 ++++++++---
- 2 files changed, 8 insertions(+), 20 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
- rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
-
---- a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
-+++ /dev/null
-@@ -1,17 +0,0 @@
--Cortina Systems Gemini SoC Watchdog
--
--Required properties:
--- compatible : must be "cortina,gemini-watchdog"
--- reg : shall contain base register location and length
--- interrupts : shall contain the interrupt for the watchdog
--
--Optional properties:
--- timeout-sec : the default watchdog timeout in seconds.
--
--Example:
--
--watchdog@41000000 {
-- compatible = "cortina,gemini-watchdog";
-- reg = <0x41000000 0x1000>;
-- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
--};
---- a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt
-+++ /dev/null
-@@ -1,17 +0,0 @@
--Cortina Systems Gemini SoC Watchdog
--
--Required properties:
--- compatible : must be "cortina,gemini-watchdog"
--- reg : shall contain base register location and length
--- interrupts : shall contain the interrupt for the watchdog
--
--Optional properties:
--- timeout-sec : the default watchdog timeout in seconds.
--
--Example:
--
--watchdog@41000000 {
-- compatible = "cortina,gemini-watchdog";
-- reg = <0x41000000 0x1000>;
-- interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.txt
-@@ -0,0 +1,22 @@
-+Faraday Technology FTWDT010 watchdog
-+
-+This is an IP part from Faraday Technology found in the Gemini
-+SoCs and others.
-+
-+Required properties:
-+- compatible : must be one of
-+ "faraday,ftwdt010"
-+ "cortina,gemini-watchdog", "faraday,ftwdt010"
-+- reg : shall contain base register location and length
-+- interrupts : shall contain the interrupt for the watchdog
-+
-+Optional properties:
-+- timeout-sec : the default watchdog timeout in seconds.
-+
-+Example:
-+
-+watchdog@41000000 {
-+ compatible = "faraday,ftwdt010";
-+ reg = <0x41000000 0x1000>;
-+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
-+};
diff --git a/target/linux/gemini/patches-4.14/0018-watchdog-gemini-ftwdt010-rename-driver-and-symbols.patch b/target/linux/gemini/patches-4.14/0018-watchdog-gemini-ftwdt010-rename-driver-and-symbols.patch
deleted file mode 100644
index 23c1989357..0000000000
--- a/target/linux/gemini/patches-4.14/0018-watchdog-gemini-ftwdt010-rename-driver-and-symbols.patch
+++ /dev/null
@@ -1,527 +0,0 @@
-From c197a5a04d658da490de08636066a6bdbebf16c5 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 16 Oct 2017 22:54:24 +0200
-Subject: [PATCH 18/31] watchdog: gemini/ftwdt010: rename driver and symbols
-
-This renames all the driver files and symbols for the Gemini
-watchdog to FTWDT010 as it has been revealed that this IP block
-is a generic watchdog timer from Faraday Technology used in
-several SoC designs.
-
-Select this driver by default for the Gemini, it is a sensible
-driver to always have enabled.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/Kconfig | 14 +--
- drivers/watchdog/Makefile | 2 +-
- drivers/watchdog/{gemini_wdt.c => ftwdt010_wdt.c} | 117 +++++++++++-----------
- 3 files changed, 68 insertions(+), 65 deletions(-)
- rename drivers/watchdog/{gemini_wdt.c => ftwdt010_wdt.c} (50%)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -321,16 +321,18 @@ config 977_WATCHDOG
-
- Not sure? It's safe to say N.
-
--config GEMINI_WATCHDOG
-- tristate "Gemini watchdog"
-- depends on ARCH_GEMINI
-+config FTWDT010_WATCHDOG
-+ tristate "Faraday Technology FTWDT010 watchdog"
-+ depends on ARM || COMPILE_TEST
- select WATCHDOG_CORE
-+ default ARCH_GEMINI
- help
-- Say Y here if to include support for the watchdog timer
-- embedded in the Cortina Systems Gemini family of devices.
-+ Say Y here if to include support for the Faraday Technology
-+ FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
-+ family of devices.
-
- To compile this driver as a module, choose M here: the
-- module will be called gemini_wdt.
-+ module will be called ftwdt010_wdt.
-
- config IXP4XX_WATCHDOG
- tristate "IXP4xx Watchdog"
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -46,7 +46,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.
- obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
- obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
--obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o
-+obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
- obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
- obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
- obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
---- a/drivers/watchdog/gemini_wdt.c
-+++ /dev/null
-@@ -1,229 +0,0 @@
--/*
-- * Watchdog driver for Cortina Systems Gemini SoC
-- *
-- * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
-- *
-- * Inspired by the out-of-tree drivers from OpenWRT:
-- * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/bitops.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/io.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/of_device.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/watchdog.h>
--
--#define GEMINI_WDCOUNTER 0x0
--#define GEMINI_WDLOAD 0x4
--#define GEMINI_WDRESTART 0x8
--#define GEMINI_WDCR 0xC
--
--#define WDRESTART_MAGIC 0x5AB9
--
--#define WDCR_CLOCK_5MHZ BIT(4)
--#define WDCR_SYS_RST BIT(1)
--#define WDCR_ENABLE BIT(0)
--
--#define WDT_CLOCK 5000000 /* 5 MHz */
--
--struct gemini_wdt {
-- struct watchdog_device wdd;
-- struct device *dev;
-- void __iomem *base;
--};
--
--static inline
--struct gemini_wdt *to_gemini_wdt(struct watchdog_device *wdd)
--{
-- return container_of(wdd, struct gemini_wdt, wdd);
--}
--
--static int gemini_wdt_start(struct watchdog_device *wdd)
--{
-- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
--
-- writel(wdd->timeout * WDT_CLOCK, gwdt->base + GEMINI_WDLOAD);
-- writel(WDRESTART_MAGIC, gwdt->base + GEMINI_WDRESTART);
-- /* set clock before enabling */
-- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
-- gwdt->base + GEMINI_WDCR);
-- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
-- gwdt->base + GEMINI_WDCR);
--
-- return 0;
--}
--
--static int gemini_wdt_stop(struct watchdog_device *wdd)
--{
-- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
--
-- writel(0, gwdt->base + GEMINI_WDCR);
--
-- return 0;
--}
--
--static int gemini_wdt_ping(struct watchdog_device *wdd)
--{
-- struct gemini_wdt *gwdt = to_gemini_wdt(wdd);
--
-- writel(WDRESTART_MAGIC, gwdt->base + GEMINI_WDRESTART);
--
-- return 0;
--}
--
--static int gemini_wdt_set_timeout(struct watchdog_device *wdd,
-- unsigned int timeout)
--{
-- wdd->timeout = timeout;
-- if (watchdog_active(wdd))
-- gemini_wdt_start(wdd);
--
-- return 0;
--}
--
--static irqreturn_t gemini_wdt_interrupt(int irq, void *data)
--{
-- struct gemini_wdt *gwdt = data;
--
-- watchdog_notify_pretimeout(&gwdt->wdd);
--
-- return IRQ_HANDLED;
--}
--
--static const struct watchdog_ops gemini_wdt_ops = {
-- .start = gemini_wdt_start,
-- .stop = gemini_wdt_stop,
-- .ping = gemini_wdt_ping,
-- .set_timeout = gemini_wdt_set_timeout,
-- .owner = THIS_MODULE,
--};
--
--static const struct watchdog_info gemini_wdt_info = {
-- .options = WDIOF_KEEPALIVEPING
-- | WDIOF_MAGICCLOSE
-- | WDIOF_SETTIMEOUT,
-- .identity = KBUILD_MODNAME,
--};
--
--
--static int gemini_wdt_probe(struct platform_device *pdev)
--{
-- struct device *dev = &pdev->dev;
-- struct resource *res;
-- struct gemini_wdt *gwdt;
-- unsigned int reg;
-- int irq;
-- int ret;
--
-- gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
-- if (!gwdt)
-- return -ENOMEM;
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- gwdt->base = devm_ioremap_resource(dev, res);
-- if (IS_ERR(gwdt->base))
-- return PTR_ERR(gwdt->base);
--
-- irq = platform_get_irq(pdev, 0);
-- if (!irq)
-- return -EINVAL;
--
-- gwdt->dev = dev;
-- gwdt->wdd.info = &gemini_wdt_info;
-- gwdt->wdd.ops = &gemini_wdt_ops;
-- gwdt->wdd.min_timeout = 1;
-- gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK;
-- gwdt->wdd.parent = dev;
--
-- /*
-- * If 'timeout-sec' unspecified in devicetree, assume a 13 second
-- * default.
-- */
-- gwdt->wdd.timeout = 13U;
-- watchdog_init_timeout(&gwdt->wdd, 0, dev);
--
-- reg = readw(gwdt->base + GEMINI_WDCR);
-- if (reg & WDCR_ENABLE) {
-- /* Watchdog was enabled by the bootloader, disable it. */
-- reg &= ~WDCR_ENABLE;
-- writel(reg, gwdt->base + GEMINI_WDCR);
-- }
--
-- ret = devm_request_irq(dev, irq, gemini_wdt_interrupt, 0,
-- "watchdog bark", gwdt);
-- if (ret)
-- return ret;
--
-- ret = devm_watchdog_register_device(dev, &gwdt->wdd);
-- if (ret) {
-- dev_err(&pdev->dev, "failed to register watchdog\n");
-- return ret;
-- }
--
-- /* Set up platform driver data */
-- platform_set_drvdata(pdev, gwdt);
-- dev_info(dev, "Gemini watchdog driver enabled\n");
--
-- return 0;
--}
--
--static int __maybe_unused gemini_wdt_suspend(struct device *dev)
--{
-- struct gemini_wdt *gwdt = dev_get_drvdata(dev);
-- unsigned int reg;
--
-- reg = readw(gwdt->base + GEMINI_WDCR);
-- reg &= ~WDCR_ENABLE;
-- writel(reg, gwdt->base + GEMINI_WDCR);
--
-- return 0;
--}
--
--static int __maybe_unused gemini_wdt_resume(struct device *dev)
--{
-- struct gemini_wdt *gwdt = dev_get_drvdata(dev);
-- unsigned int reg;
--
-- if (watchdog_active(&gwdt->wdd)) {
-- reg = readw(gwdt->base + GEMINI_WDCR);
-- reg |= WDCR_ENABLE;
-- writel(reg, gwdt->base + GEMINI_WDCR);
-- }
--
-- return 0;
--}
--
--static const struct dev_pm_ops gemini_wdt_dev_pm_ops = {
-- SET_SYSTEM_SLEEP_PM_OPS(gemini_wdt_suspend,
-- gemini_wdt_resume)
--};
--
--#ifdef CONFIG_OF
--static const struct of_device_id gemini_wdt_match[] = {
-- { .compatible = "cortina,gemini-watchdog" },
-- {},
--};
--MODULE_DEVICE_TABLE(of, gemini_wdt_match);
--#endif
--
--static struct platform_driver gemini_wdt_driver = {
-- .probe = gemini_wdt_probe,
-- .driver = {
-- .name = "gemini-wdt",
-- .of_match_table = of_match_ptr(gemini_wdt_match),
-- .pm = &gemini_wdt_dev_pm_ops,
-- },
--};
--module_platform_driver(gemini_wdt_driver);
--MODULE_AUTHOR("Linus Walleij");
--MODULE_DESCRIPTION("Watchdog driver for Gemini");
--MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/watchdog/ftwdt010_wdt.c
-@@ -0,0 +1,230 @@
-+/*
-+ * Watchdog driver for Faraday Technology FTWDT010
-+ *
-+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
-+ *
-+ * Inspired by the out-of-tree drivers from OpenWRT:
-+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/watchdog.h>
-+
-+#define FTWDT010_WDCOUNTER 0x0
-+#define FTWDT010_WDLOAD 0x4
-+#define FTWDT010_WDRESTART 0x8
-+#define FTWDT010_WDCR 0xC
-+
-+#define WDRESTART_MAGIC 0x5AB9
-+
-+#define WDCR_CLOCK_5MHZ BIT(4)
-+#define WDCR_SYS_RST BIT(1)
-+#define WDCR_ENABLE BIT(0)
-+
-+#define WDT_CLOCK 5000000 /* 5 MHz */
-+
-+struct ftwdt010_wdt {
-+ struct watchdog_device wdd;
-+ struct device *dev;
-+ void __iomem *base;
-+};
-+
-+static inline
-+struct ftwdt010_wdt *to_ftwdt010_wdt(struct watchdog_device *wdd)
-+{
-+ return container_of(wdd, struct ftwdt010_wdt, wdd);
-+}
-+
-+static int ftwdt010_wdt_start(struct watchdog_device *wdd)
-+{
-+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
-+
-+ writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD);
-+ writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
-+ /* set clock before enabling */
-+ writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
-+ gwdt->base + FTWDT010_WDCR);
-+ writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
-+ gwdt->base + FTWDT010_WDCR);
-+
-+ return 0;
-+}
-+
-+static int ftwdt010_wdt_stop(struct watchdog_device *wdd)
-+{
-+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
-+
-+ writel(0, gwdt->base + FTWDT010_WDCR);
-+
-+ return 0;
-+}
-+
-+static int ftwdt010_wdt_ping(struct watchdog_device *wdd)
-+{
-+ struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
-+
-+ writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
-+
-+ return 0;
-+}
-+
-+static int ftwdt010_wdt_set_timeout(struct watchdog_device *wdd,
-+ unsigned int timeout)
-+{
-+ wdd->timeout = timeout;
-+ if (watchdog_active(wdd))
-+ ftwdt010_wdt_start(wdd);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t ftwdt010_wdt_interrupt(int irq, void *data)
-+{
-+ struct ftwdt010_wdt *gwdt = data;
-+
-+ watchdog_notify_pretimeout(&gwdt->wdd);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static const struct watchdog_ops ftwdt010_wdt_ops = {
-+ .start = ftwdt010_wdt_start,
-+ .stop = ftwdt010_wdt_stop,
-+ .ping = ftwdt010_wdt_ping,
-+ .set_timeout = ftwdt010_wdt_set_timeout,
-+ .owner = THIS_MODULE,
-+};
-+
-+static const struct watchdog_info ftwdt010_wdt_info = {
-+ .options = WDIOF_KEEPALIVEPING
-+ | WDIOF_MAGICCLOSE
-+ | WDIOF_SETTIMEOUT,
-+ .identity = KBUILD_MODNAME,
-+};
-+
-+
-+static int ftwdt010_wdt_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ struct ftwdt010_wdt *gwdt;
-+ unsigned int reg;
-+ int irq;
-+ int ret;
-+
-+ gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
-+ if (!gwdt)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ gwdt->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(gwdt->base))
-+ return PTR_ERR(gwdt->base);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (!irq)
-+ return -EINVAL;
-+
-+ gwdt->dev = dev;
-+ gwdt->wdd.info = &ftwdt010_wdt_info;
-+ gwdt->wdd.ops = &ftwdt010_wdt_ops;
-+ gwdt->wdd.min_timeout = 1;
-+ gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK;
-+ gwdt->wdd.parent = dev;
-+
-+ /*
-+ * If 'timeout-sec' unspecified in devicetree, assume a 13 second
-+ * default.
-+ */
-+ gwdt->wdd.timeout = 13U;
-+ watchdog_init_timeout(&gwdt->wdd, 0, dev);
-+
-+ reg = readw(gwdt->base + FTWDT010_WDCR);
-+ if (reg & WDCR_ENABLE) {
-+ /* Watchdog was enabled by the bootloader, disable it. */
-+ reg &= ~WDCR_ENABLE;
-+ writel(reg, gwdt->base + FTWDT010_WDCR);
-+ }
-+
-+ ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
-+ "watchdog bark", gwdt);
-+ if (ret)
-+ return ret;
-+
-+ ret = devm_watchdog_register_device(dev, &gwdt->wdd);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register watchdog\n");
-+ return ret;
-+ }
-+
-+ /* Set up platform driver data */
-+ platform_set_drvdata(pdev, gwdt);
-+ dev_info(dev, "FTWDT010 watchdog driver enabled\n");
-+
-+ return 0;
-+}
-+
-+static int __maybe_unused ftwdt010_wdt_suspend(struct device *dev)
-+{
-+ struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
-+ unsigned int reg;
-+
-+ reg = readw(gwdt->base + FTWDT010_WDCR);
-+ reg &= ~WDCR_ENABLE;
-+ writel(reg, gwdt->base + FTWDT010_WDCR);
-+
-+ return 0;
-+}
-+
-+static int __maybe_unused ftwdt010_wdt_resume(struct device *dev)
-+{
-+ struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
-+ unsigned int reg;
-+
-+ if (watchdog_active(&gwdt->wdd)) {
-+ reg = readw(gwdt->base + FTWDT010_WDCR);
-+ reg |= WDCR_ENABLE;
-+ writel(reg, gwdt->base + FTWDT010_WDCR);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(ftwdt010_wdt_suspend,
-+ ftwdt010_wdt_resume)
-+};
-+
-+#ifdef CONFIG_OF
-+static const struct of_device_id ftwdt010_wdt_match[] = {
-+ { .compatible = "faraday,ftwdt010" },
-+ { .compatible = "cortina,gemini-watchdog" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match);
-+#endif
-+
-+static struct platform_driver ftwdt010_wdt_driver = {
-+ .probe = ftwdt010_wdt_probe,
-+ .driver = {
-+ .name = "ftwdt010-wdt",
-+ .of_match_table = of_match_ptr(ftwdt010_wdt_match),
-+ .pm = &ftwdt010_wdt_dev_pm_ops,
-+ },
-+};
-+module_platform_driver(ftwdt010_wdt_driver);
-+MODULE_AUTHOR("Linus Walleij");
-+MODULE_DESCRIPTION("Watchdog driver for Faraday Technology FTWDT010");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/gemini/patches-4.14/0019-watchdog-ftwdt010-Make-interrupt-optional.patch b/target/linux/gemini/patches-4.14/0019-watchdog-ftwdt010-Make-interrupt-optional.patch
deleted file mode 100644
index 23c4ab5c0d..0000000000
--- a/target/linux/gemini/patches-4.14/0019-watchdog-ftwdt010-Make-interrupt-optional.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 4347a0b0699989b889857c9d4ccfbce339859f13 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 16 Oct 2017 22:54:25 +0200
-Subject: [PATCH 19/31] watchdog: ftwdt010: Make interrupt optional
-
-The Moxart does not appear to be using the interrupt from the
-watchdog timer, maybe it's not even routed, so as to support
-more architectures with this driver, make the interrupt
-optional.
-
-While we are at it: actually enable the use of the interrupt
-if present by setting the right bit in the control register
-and define the missing control register bits.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
- drivers/watchdog/ftwdt010_wdt.c | 30 ++++++++++++++++++------------
- 1 file changed, 18 insertions(+), 12 deletions(-)
-
---- a/drivers/watchdog/ftwdt010_wdt.c
-+++ b/drivers/watchdog/ftwdt010_wdt.c
-@@ -30,6 +30,8 @@
- #define WDRESTART_MAGIC 0x5AB9
-
- #define WDCR_CLOCK_5MHZ BIT(4)
-+#define WDCR_WDEXT BIT(3)
-+#define WDCR_WDINTR BIT(2)
- #define WDCR_SYS_RST BIT(1)
- #define WDCR_ENABLE BIT(0)
-
-@@ -39,6 +41,7 @@ struct ftwdt010_wdt {
- struct watchdog_device wdd;
- struct device *dev;
- void __iomem *base;
-+ bool has_irq;
- };
-
- static inline
-@@ -50,14 +53,17 @@ struct ftwdt010_wdt *to_ftwdt010_wdt(str
- static int ftwdt010_wdt_start(struct watchdog_device *wdd)
- {
- struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
-+ u32 enable;
-
- writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD);
- writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
- /* set clock before enabling */
-- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST,
-- gwdt->base + FTWDT010_WDCR);
-- writel(WDCR_CLOCK_5MHZ | WDCR_SYS_RST | WDCR_ENABLE,
-- gwdt->base + FTWDT010_WDCR);
-+ enable = WDCR_CLOCK_5MHZ | WDCR_SYS_RST;
-+ writel(enable, gwdt->base + FTWDT010_WDCR);
-+ if (gwdt->has_irq)
-+ enable |= WDCR_WDINTR;
-+ enable |= WDCR_ENABLE;
-+ writel(enable, gwdt->base + FTWDT010_WDCR);
-
- return 0;
- }
-@@ -133,10 +139,6 @@ static int ftwdt010_wdt_probe(struct pla
- if (IS_ERR(gwdt->base))
- return PTR_ERR(gwdt->base);
-
-- irq = platform_get_irq(pdev, 0);
-- if (!irq)
-- return -EINVAL;
--
- gwdt->dev = dev;
- gwdt->wdd.info = &ftwdt010_wdt_info;
- gwdt->wdd.ops = &ftwdt010_wdt_ops;
-@@ -158,10 +160,14 @@ static int ftwdt010_wdt_probe(struct pla
- writel(reg, gwdt->base + FTWDT010_WDCR);
- }
-
-- ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
-- "watchdog bark", gwdt);
-- if (ret)
-- return ret;
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq) {
-+ ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
-+ "watchdog bark", gwdt);
-+ if (ret)
-+ return ret;
-+ gwdt->has_irq = true;
-+ }
-
- ret = devm_watchdog_register_device(dev, &gwdt->wdd);
- if (ret) {
diff --git a/target/linux/gemini/patches-4.14/0020-soc-Add-SoC-driver-for-Gemini.patch b/target/linux/gemini/patches-4.14/0020-soc-Add-SoC-driver-for-Gemini.patch
deleted file mode 100644
index f1bbe0a15f..0000000000
--- a/target/linux/gemini/patches-4.14/0020-soc-Add-SoC-driver-for-Gemini.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From b0a88a861b036124ef2d6acfe6dd87cfde63e750 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 22 Dec 2017 00:19:08 +0100
-Subject: [PATCH 20/31] soc: Add SoC driver for Gemini
-
-This adds an SoC driver for the Gemini. Currently there
-is only one thing not fitting into any other framework,
-and that is the bus arbitration setting.
-
-All Gemini vendor trees seem to be setting this register to
-exactly the same arbitration so we just add a small code
-snippet to do this at subsys_init() time before any other
-drivers kick in.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
- drivers/soc/Makefile | 1 +
- drivers/soc/gemini/Makefile | 2 ++
- drivers/soc/gemini/soc-gemini.c | 71 +++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 74 insertions(+)
- create mode 100644 drivers/soc/gemini/Makefile
- create mode 100644 drivers/soc/gemini/soc-gemini.c
-
---- a/drivers/soc/Makefile
-+++ b/drivers/soc/Makefile
-@@ -9,6 +9,7 @@ obj-y += bcm/
- obj-$(CONFIG_ARCH_DOVE) += dove/
- obj-$(CONFIG_MACH_DOVE) += dove/
- obj-y += fsl/
-+obj-$(CONFIG_ARCH_GEMINI) += gemini/
- obj-$(CONFIG_ARCH_MXC) += imx/
- obj-$(CONFIG_SOC_XWAY) += lantiq/
- obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
---- /dev/null
-+++ b/drivers/soc/gemini/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+obj-y += soc-gemini.o
---- /dev/null
-+++ b/drivers/soc/gemini/soc-gemini.c
-@@ -0,0 +1,71 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2017 Linaro Ltd.
-+ *
-+ * Author: Linus Walleij <linus.walleij@linaro.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2, as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-+#include <linux/of.h>
-+
-+#define GLOBAL_WORD_ID 0x00
-+#define GEMINI_GLOBAL_ARB1_CTRL 0x2c
-+#define GEMINI_ARB1_BURST_MASK GENMASK(21, 16)
-+#define GEMINI_ARB1_BURST_SHIFT 16
-+/* These all define the priority on the BUS2 backplane */
-+#define GEMINI_ARB1_PRIO_MASK GENMASK(9, 0)
-+#define GEMINI_ARB1_DMAC_HIGH_PRIO BIT(0)
-+#define GEMINI_ARB1_IDE_HIGH_PRIO BIT(1)
-+#define GEMINI_ARB1_RAID_HIGH_PRIO BIT(2)
-+#define GEMINI_ARB1_SECURITY_HIGH_PRIO BIT(3)
-+#define GEMINI_ARB1_GMAC0_HIGH_PRIO BIT(4)
-+#define GEMINI_ARB1_GMAC1_HIGH_PRIO BIT(5)
-+#define GEMINI_ARB1_USB0_HIGH_PRIO BIT(6)
-+#define GEMINI_ARB1_USB1_HIGH_PRIO BIT(7)
-+#define GEMINI_ARB1_PCI_HIGH_PRIO BIT(8)
-+#define GEMINI_ARB1_TVE_HIGH_PRIO BIT(9)
-+
-+#define GEMINI_DEFAULT_BURST_SIZE 0x20
-+#define GEMINI_DEFAULT_PRIO (GEMINI_ARB1_GMAC0_HIGH_PRIO | \
-+ GEMINI_ARB1_GMAC1_HIGH_PRIO)
-+
-+static int __init gemini_soc_init(void)
-+{
-+ struct regmap *map;
-+ u32 rev;
-+ u32 val;
-+ int ret;
-+
-+ /* Multiplatform guard, only proceed on Gemini */
-+ if (!of_machine_is_compatible("cortina,gemini"))
-+ return 0;
-+
-+ map = syscon_regmap_lookup_by_compatible("cortina,gemini-syscon");
-+ if (IS_ERR(map))
-+ return PTR_ERR(map);
-+ ret = regmap_read(map, GLOBAL_WORD_ID, &rev);
-+ if (ret)
-+ return ret;
-+
-+ val = (GEMINI_DEFAULT_BURST_SIZE << GEMINI_ARB1_BURST_SHIFT) |
-+ GEMINI_DEFAULT_PRIO;
-+
-+ /* Set up system arbitration */
-+ regmap_update_bits(map,
-+ GEMINI_GLOBAL_ARB1_CTRL,
-+ GEMINI_ARB1_BURST_MASK | GEMINI_ARB1_PRIO_MASK,
-+ val);
-+
-+ pr_info("Gemini SoC %04x revision %02x, set arbitration %08x\n",
-+ rev >> 8, rev & 0xff, val);
-+
-+ return 0;
-+}
-+subsys_initcall(gemini_soc_init);
diff --git a/target/linux/gemini/patches-4.14/0021-net-ethernet-Add-DT-bindings-for-the-Gemini-ethernet.patch b/target/linux/gemini/patches-4.14/0021-net-ethernet-Add-DT-bindings-for-the-Gemini-ethernet.patch
deleted file mode 100644
index 19653d5ad1..0000000000
--- a/target/linux/gemini/patches-4.14/0021-net-ethernet-Add-DT-bindings-for-the-Gemini-ethernet.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 49bc597009f52ec8970269f6201d3ed415a844ee Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 12 Jan 2018 22:34:23 +0100
-Subject: [PATCH 21/31] net: ethernet: Add DT bindings for the Gemini ethernet
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds the device tree bindings for the Gemini ethernet
-controller. It is pretty straight-forward, using standard
-bindings and modelling the two child ports as child devices
-under the parent ethernet controller device.
-
-Cc: devicetree@vger.kernel.org
-Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com>
-Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../bindings/net/cortina,gemini-ethernet.txt | 92 ++++++++++++++++++++++
- 1 file changed, 92 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
-@@ -0,0 +1,92 @@
-+Cortina Systems Gemini Ethernet Controller
-+==========================================
-+
-+This ethernet controller is found in the Gemini SoC family:
-+StorLink SL3512 and SL3516, also known as Cortina Systems
-+CS3512 and CS3516.
-+
-+Required properties:
-+- compatible: must be "cortina,gemini-ethernet"
-+- reg: must contain the global registers and the V-bit and A-bit
-+ memory areas, in total three register sets.
-+- syscon: a phandle to the system controller
-+- #address-cells: must be specified, must be <1>
-+- #size-cells: must be specified, must be <1>
-+- ranges: should be state like this giving a 1:1 address translation
-+ for the subnodes
-+
-+The subnodes represents the two ethernet ports in this device.
-+They are not independent of each other since they share resources
-+in the parent node, and are thus children.
-+
-+Required subnodes:
-+- port0: contains the resources for ethernet port 0
-+- port1: contains the resources for ethernet port 1
-+
-+Required subnode properties:
-+- compatible: must be "cortina,gemini-ethernet-port"
-+- reg: must contain two register areas: the DMA/TOE memory and
-+ the GMAC memory area of the port
-+- interrupts: should contain the interrupt line of the port.
-+ this is nominally a level interrupt active high.
-+- resets: this must provide an SoC-integrated reset line for
-+ the port.
-+- clocks: this should contain a handle to the PCLK clock for
-+ clocking the silicon in this port
-+- clock-names: must be "PCLK"
-+
-+Optional subnode properties:
-+- phy-mode: see ethernet.txt
-+- phy-handle: see ethernet.txt
-+
-+Example:
-+
-+mdio-bus {
-+ (...)
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ device_type = "ethernet-phy";
-+ };
-+ phy1: ethernet-phy@3 {
-+ reg = <3>;
-+ device_type = "ethernet-phy";
-+ };
-+};
-+
-+
-+ethernet@60000000 {
-+ compatible = "cortina,gemini-ethernet";
-+ reg = <0x60000000 0x4000>, /* Global registers, queue */
-+ <0x60004000 0x2000>, /* V-bit */
-+ <0x60006000 0x2000>; /* A-bit */
-+ syscon = <&syscon>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ gmac0: ethernet-port@0 {
-+ compatible = "cortina,gemini-ethernet-port";
-+ reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-+ <0x6000a000 0x2000>; /* Port 0 GMAC */
-+ interrupt-parent = <&intcon>;
-+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_GMAC0>;
-+ clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-+ clock-names = "PCLK";
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+
-+ gmac1: ethernet-port@1 {
-+ compatible = "cortina,gemini-ethernet-port";
-+ reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-+ <0x6000e000 0x2000>; /* Port 1 GMAC */
-+ interrupt-parent = <&intcon>;
-+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_GMAC1>;
-+ clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-+ clock-names = "PCLK";
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy1>;
-+ };
-+};
diff --git a/target/linux/gemini/patches-4.14/0022-net-ethernet-Add-a-driver-for-Gemini-gigabit-etherne.patch b/target/linux/gemini/patches-4.14/0022-net-ethernet-Add-a-driver-for-Gemini-gigabit-etherne.patch
deleted file mode 100644
index bad9bfa34e..0000000000
--- a/target/linux/gemini/patches-4.14/0022-net-ethernet-Add-a-driver-for-Gemini-gigabit-etherne.patch
+++ /dev/null
@@ -1,3661 +0,0 @@
-From 07826b86d4ce4d35fd1674d7f78e4b2060ab2910 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 12 Jan 2018 22:34:24 +0100
-Subject: [PATCH 22/31] net: ethernet: Add a driver for Gemini gigabit ethernet
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Gemini ethernet has been around for years as an out-of-tree
-patch used with the NAS boxen and routers built on StorLink
-SL3512 and SL3516, later Storm Semiconductor, later Cortina
-Systems. These ASICs are still being deployed and brand new
-off-the-shelf systems using it can easily be acquired.
-
-The full name of the IP block is "Net Engine and Gigabit
-Ethernet MAC" commonly just called "GMAC".
-
-The hardware block contains a common TCP Offload Enginer (TOE)
-that can be used by both MACs. The current driver does not use
-it.
-
-Cc: Tobias Waldvogel <tobias.waldvogel@gmail.com>
-Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS | 2 +
- drivers/net/ethernet/Kconfig | 1 +
- drivers/net/ethernet/Makefile | 1 +
- drivers/net/ethernet/cortina/Kconfig | 22 +
- drivers/net/ethernet/cortina/Makefile | 4 +
- drivers/net/ethernet/cortina/gemini.c | 2593 +++++++++++++++++++++++++++++++++
- drivers/net/ethernet/cortina/gemini.h | 958 ++++++++++++
- 7 files changed, 3581 insertions(+)
- create mode 100644 drivers/net/ethernet/cortina/Kconfig
- create mode 100644 drivers/net/ethernet/cortina/Makefile
- create mode 100644 drivers/net/ethernet/cortina/gemini.c
- create mode 100644 drivers/net/ethernet/cortina/gemini.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1327,8 +1327,10 @@ T: git git://github.com/ulli-kroll/linux
- S: Maintained
- F: Documentation/devicetree/bindings/arm/gemini.txt
- F: Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
-+F: Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
- F: Documentation/devicetree/bindings/rtc/faraday,ftrtc010.txt
- F: arch/arm/mach-gemini/
-+F: drivers/net/ethernet/cortina/gemini/*
- F: drivers/pinctrl/pinctrl-gemini.c
- F: drivers/rtc/rtc-ftrtc010.c
-
---- a/drivers/net/ethernet/Kconfig
-+++ b/drivers/net/ethernet/Kconfig
-@@ -42,6 +42,7 @@ source "drivers/net/ethernet/cavium/Kcon
- source "drivers/net/ethernet/chelsio/Kconfig"
- source "drivers/net/ethernet/cirrus/Kconfig"
- source "drivers/net/ethernet/cisco/Kconfig"
-+source "drivers/net/ethernet/cortina/Kconfig"
-
- config CX_ECAT
- tristate "Beckhoff CX5020 EtherCAT master support"
---- a/drivers/net/ethernet/Makefile
-+++ b/drivers/net/ethernet/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_NET_VENDOR_CAVIUM) += caviu
- obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
- obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
- obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
-+obj-$(CONFIG_NET_VENDOR_CORTINA) += cortina/
- obj-$(CONFIG_CX_ECAT) += ec_bhf.o
- obj-$(CONFIG_DM9000) += davicom/
- obj-$(CONFIG_DNET) += dnet.o
---- /dev/null
-+++ b/drivers/net/ethernet/cortina/Kconfig
-@@ -0,0 +1,22 @@
-+# SPDX-License-Identifier: GPL-2.0
-+# Cortina ethernet devices
-+
-+config NET_VENDOR_CORTINA
-+ bool "Cortina Gemini devices"
-+ default y
-+ ---help---
-+ If you have a network (Ethernet) card belonging to this class, say Y
-+ and read the Ethernet-HOWTO, available from
-+ <http://www.tldp.org/docs.html#howto>.
-+
-+if NET_VENDOR_CORTINA
-+
-+config GEMINI_ETHERNET
-+ tristate "Gemini Gigabit Ethernet support"
-+ depends on OF
-+ select PHYLIB
-+ select CRC32
-+ ---help---
-+ This driver supports StorLink SL351x (Gemini) dual Gigabit Ethernet.
-+
-+endif # NET_VENDOR_CORTINA
---- /dev/null
-+++ b/drivers/net/ethernet/cortina/Makefile
-@@ -0,0 +1,4 @@
-+# SPDX-License-Identifier: GPL-2.0
-+# Makefile for the Cortina Gemini network device drivers.
-+
-+obj-$(CONFIG_GEMINI_ETHERNET) += gemini.o
---- /dev/null
-+++ b/drivers/net/ethernet/cortina/gemini.c
-@@ -0,0 +1,2593 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Ethernet device driver for Cortina Systems Gemini SoC
-+ * Also known as the StorLink SL3512 and SL3516 (SL351x) or Lepus
-+ * Net Engine and Gigabit Ethernet MAC (GMAC)
-+ * This hardware contains a TCP Offload Engine (TOE) but currently the
-+ * driver does not make use of it.
-+ *
-+ * Authors:
-+ * Linus Walleij <linus.walleij@linaro.org>
-+ * Tobias Waldvogel <tobias.waldvogel@gmail.com> (OpenWRT)
-+ * Michał Mirosław <mirq-linux@rere.qmqm.pl>
-+ * Paulius Zaleckas <paulius.zaleckas@gmail.com>
-+ * Giuseppe De Robertis <Giuseppe.DeRobertis@ba.infn.it>
-+ * Gary Chen & Ch Hsu Storlink Semiconductor
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/cache.h>
-+#include <linux/interrupt.h>
-+#include <linux/reset.h>
-+#include <linux/clk.h>
-+#include <linux/of.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/of_platform.h>
-+#include <linux/etherdevice.h>
-+#include <linux/if_vlan.h>
-+#include <linux/skbuff.h>
-+#include <linux/phy.h>
-+#include <linux/crc32.h>
-+#include <linux/ethtool.h>
-+#include <linux/tcp.h>
-+#include <linux/u64_stats_sync.h>
-+
-+#include <linux/in.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+
-+#include "gemini.h"
-+
-+#define DRV_NAME "gmac-gemini"
-+#define DRV_VERSION "1.0"
-+
-+#define HSIZE_8 0x00
-+#define HSIZE_16 0x01
-+#define HSIZE_32 0x02
-+
-+#define HBURST_SINGLE 0x00
-+#define HBURST_INCR 0x01
-+#define HBURST_INCR4 0x02
-+#define HBURST_INCR8 0x03
-+
-+#define HPROT_DATA_CACHE BIT(0)
-+#define HPROT_PRIVILIGED BIT(1)
-+#define HPROT_BUFFERABLE BIT(2)
-+#define HPROT_CACHABLE BIT(3)
-+
-+#define DEFAULT_RX_COALESCE_NSECS 0
-+#define DEFAULT_GMAC_RXQ_ORDER 9
-+#define DEFAULT_GMAC_TXQ_ORDER 8
-+#define DEFAULT_RX_BUF_ORDER 11
-+#define DEFAULT_NAPI_WEIGHT 64
-+#define TX_MAX_FRAGS 16
-+#define TX_QUEUE_NUM 1 /* max: 6 */
-+#define RX_MAX_ALLOC_ORDER 2
-+
-+#define GMAC0_IRQ0_2 (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
-+ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT)
-+#define GMAC0_IRQ0_TXQ0_INTS (GMAC0_SWTQ00_EOF_INT_BIT | \
-+ GMAC0_SWTQ00_FIN_INT_BIT)
-+#define GMAC0_IRQ4_8 (GMAC0_MIB_INT_BIT | GMAC0_RX_OVERRUN_INT_BIT)
-+
-+#define GMAC_OFFLOAD_FEATURES (NETIF_F_SG | NETIF_F_IP_CSUM | \
-+ NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | \
-+ NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6)
-+
-+/**
-+ * struct gmac_queue_page - page buffer per-page info
-+ */
-+struct gmac_queue_page {
-+ struct page *page;
-+ dma_addr_t mapping;
-+};
-+
-+struct gmac_txq {
-+ struct gmac_txdesc *ring;
-+ struct sk_buff **skb;
-+ unsigned int cptr;
-+ unsigned int noirq_packets;
-+};
-+
-+struct gemini_ethernet;
-+
-+struct gemini_ethernet_port {
-+ u8 id; /* 0 or 1 */
-+
-+ struct gemini_ethernet *geth;
-+ struct net_device *netdev;
-+ struct device *dev;
-+ void __iomem *dma_base;
-+ void __iomem *gmac_base;
-+ struct clk *pclk;
-+ struct reset_control *reset;
-+ int irq;
-+ __le32 mac_addr[3];
-+
-+ void __iomem *rxq_rwptr;
-+ struct gmac_rxdesc *rxq_ring;
-+ unsigned int rxq_order;
-+
-+ struct napi_struct napi;
-+ struct hrtimer rx_coalesce_timer;
-+ unsigned int rx_coalesce_nsecs;
-+ unsigned int freeq_refill;
-+ struct gmac_txq txq[TX_QUEUE_NUM];
-+ unsigned int txq_order;
-+ unsigned int irq_every_tx_packets;
-+
-+ dma_addr_t rxq_dma_base;
-+ dma_addr_t txq_dma_base;
-+
-+ unsigned int msg_enable;
-+ spinlock_t config_lock; /* Locks config register */
-+
-+ struct u64_stats_sync tx_stats_syncp;
-+ struct u64_stats_sync rx_stats_syncp;
-+ struct u64_stats_sync ir_stats_syncp;
-+
-+ struct rtnl_link_stats64 stats;
-+ u64 hw_stats[RX_STATS_NUM];
-+ u64 rx_stats[RX_STATUS_NUM];
-+ u64 rx_csum_stats[RX_CHKSUM_NUM];
-+ u64 rx_napi_exits;
-+ u64 tx_frag_stats[TX_MAX_FRAGS];
-+ u64 tx_frags_linearized;
-+ u64 tx_hw_csummed;
-+};
-+
-+struct gemini_ethernet {
-+ struct device *dev;
-+ void __iomem *base;
-+ struct gemini_ethernet_port *port0;
-+ struct gemini_ethernet_port *port1;
-+
-+ spinlock_t irq_lock; /* Locks IRQ-related registers */
-+ unsigned int freeq_order;
-+ unsigned int freeq_frag_order;
-+ struct gmac_rxdesc *freeq_ring;
-+ dma_addr_t freeq_dma_base;
-+ struct gmac_queue_page *freeq_pages;
-+ unsigned int num_freeq_pages;
-+ spinlock_t freeq_lock; /* Locks queue from reentrance */
-+};
-+
-+#define GMAC_STATS_NUM ( \
-+ RX_STATS_NUM + RX_STATUS_NUM + RX_CHKSUM_NUM + 1 + \
-+ TX_MAX_FRAGS + 2)
-+
-+static const char gmac_stats_strings[GMAC_STATS_NUM][ETH_GSTRING_LEN] = {
-+ "GMAC_IN_DISCARDS",
-+ "GMAC_IN_ERRORS",
-+ "GMAC_IN_MCAST",
-+ "GMAC_IN_BCAST",
-+ "GMAC_IN_MAC1",
-+ "GMAC_IN_MAC2",
-+ "RX_STATUS_GOOD_FRAME",
-+ "RX_STATUS_TOO_LONG_GOOD_CRC",
-+ "RX_STATUS_RUNT_FRAME",
-+ "RX_STATUS_SFD_NOT_FOUND",
-+ "RX_STATUS_CRC_ERROR",
-+ "RX_STATUS_TOO_LONG_BAD_CRC",
-+ "RX_STATUS_ALIGNMENT_ERROR",
-+ "RX_STATUS_TOO_LONG_BAD_ALIGN",
-+ "RX_STATUS_RX_ERR",
-+ "RX_STATUS_DA_FILTERED",
-+ "RX_STATUS_BUFFER_FULL",
-+ "RX_STATUS_11",
-+ "RX_STATUS_12",
-+ "RX_STATUS_13",
-+ "RX_STATUS_14",
-+ "RX_STATUS_15",
-+ "RX_CHKSUM_IP_UDP_TCP_OK",
-+ "RX_CHKSUM_IP_OK_ONLY",
-+ "RX_CHKSUM_NONE",
-+ "RX_CHKSUM_3",
-+ "RX_CHKSUM_IP_ERR_UNKNOWN",
-+ "RX_CHKSUM_IP_ERR",
-+ "RX_CHKSUM_TCP_UDP_ERR",
-+ "RX_CHKSUM_7",
-+ "RX_NAPI_EXITS",
-+ "TX_FRAGS[1]",
-+ "TX_FRAGS[2]",
-+ "TX_FRAGS[3]",
-+ "TX_FRAGS[4]",
-+ "TX_FRAGS[5]",
-+ "TX_FRAGS[6]",
-+ "TX_FRAGS[7]",
-+ "TX_FRAGS[8]",
-+ "TX_FRAGS[9]",
-+ "TX_FRAGS[10]",
-+ "TX_FRAGS[11]",
-+ "TX_FRAGS[12]",
-+ "TX_FRAGS[13]",
-+ "TX_FRAGS[14]",
-+ "TX_FRAGS[15]",
-+ "TX_FRAGS[16+]",
-+ "TX_FRAGS_LINEARIZED",
-+ "TX_HW_CSUMMED",
-+};
-+
-+static void gmac_dump_dma_state(struct net_device *netdev);
-+
-+static void gmac_update_config0_reg(struct net_device *netdev,
-+ u32 val, u32 vmask)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(&port->config_lock, flags);
-+
-+ reg = readl(port->gmac_base + GMAC_CONFIG0);
-+ reg = (reg & ~vmask) | val;
-+ writel(reg, port->gmac_base + GMAC_CONFIG0);
-+
-+ spin_unlock_irqrestore(&port->config_lock, flags);
-+}
-+
-+static void gmac_enable_tx_rx(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(&port->config_lock, flags);
-+
-+ reg = readl(port->gmac_base + GMAC_CONFIG0);
-+ reg &= ~CONFIG0_TX_RX_DISABLE;
-+ writel(reg, port->gmac_base + GMAC_CONFIG0);
-+
-+ spin_unlock_irqrestore(&port->config_lock, flags);
-+}
-+
-+static void gmac_disable_tx_rx(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned long flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&port->config_lock, flags);
-+
-+ val = readl(port->gmac_base + GMAC_CONFIG0);
-+ val |= CONFIG0_TX_RX_DISABLE;
-+ writel(val, port->gmac_base + GMAC_CONFIG0);
-+
-+ spin_unlock_irqrestore(&port->config_lock, flags);
-+
-+ mdelay(10); /* let GMAC consume packet */
-+}
-+
-+static void gmac_set_flow_control(struct net_device *netdev, bool tx, bool rx)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned long flags;
-+ u32 val;
-+
-+ spin_lock_irqsave(&port->config_lock, flags);
-+
-+ val = readl(port->gmac_base + GMAC_CONFIG0);
-+ val &= ~CONFIG0_FLOW_CTL;
-+ if (tx)
-+ val |= CONFIG0_FLOW_TX;
-+ if (rx)
-+ val |= CONFIG0_FLOW_RX;
-+ writel(val, port->gmac_base + GMAC_CONFIG0);
-+
-+ spin_unlock_irqrestore(&port->config_lock, flags);
-+}
-+
-+static void gmac_speed_set(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct phy_device *phydev = netdev->phydev;
-+ union gmac_status status, old_status;
-+ int pause_tx = 0;
-+ int pause_rx = 0;
-+
-+ status.bits32 = readl(port->gmac_base + GMAC_STATUS);
-+ old_status.bits32 = status.bits32;
-+ status.bits.link = phydev->link;
-+ status.bits.duplex = phydev->duplex;
-+
-+ switch (phydev->speed) {
-+ case 1000:
-+ status.bits.speed = GMAC_SPEED_1000;
-+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+ netdev_info(netdev, "connect to RGMII @ 1Gbit\n");
-+ break;
-+ case 100:
-+ status.bits.speed = GMAC_SPEED_100;
-+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-+ netdev_info(netdev, "connect to RGMII @ 100 Mbit\n");
-+ break;
-+ case 10:
-+ status.bits.speed = GMAC_SPEED_10;
-+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-+ netdev_info(netdev, "connect to RGMII @ 10 Mbit\n");
-+ break;
-+ default:
-+ netdev_warn(netdev, "Not supported PHY speed (%d)\n",
-+ phydev->speed);
-+ }
-+
-+ if (phydev->duplex == DUPLEX_FULL) {
-+ u16 lcladv = phy_read(phydev, MII_ADVERTISE);
-+ u16 rmtadv = phy_read(phydev, MII_LPA);
-+ u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
-+
-+ if (cap & FLOW_CTRL_RX)
-+ pause_rx = 1;
-+ if (cap & FLOW_CTRL_TX)
-+ pause_tx = 1;
-+ }
-+
-+ gmac_set_flow_control(netdev, pause_tx, pause_rx);
-+
-+ if (old_status.bits32 == status.bits32)
-+ return;
-+
-+ if (netif_msg_link(port)) {
-+ phy_print_status(phydev);
-+ netdev_info(netdev, "link flow control: %s\n",
-+ phydev->pause
-+ ? (phydev->asym_pause ? "tx" : "both")
-+ : (phydev->asym_pause ? "rx" : "none")
-+ );
-+ }
-+
-+ gmac_disable_tx_rx(netdev);
-+ writel(status.bits32, port->gmac_base + GMAC_STATUS);
-+ gmac_enable_tx_rx(netdev);
-+}
-+
-+static int gmac_setup_phy(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ union gmac_status status = { .bits32 = 0 };
-+ struct device *dev = port->dev;
-+ struct phy_device *phy;
-+
-+ phy = of_phy_get_and_connect(netdev,
-+ dev->of_node,
-+ gmac_speed_set);
-+ if (!phy)
-+ return -ENODEV;
-+ netdev->phydev = phy;
-+
-+ netdev_info(netdev, "connected to PHY \"%s\"\n",
-+ phydev_name(phy));
-+ phy_attached_print(phy, "phy_id=0x%.8lx, phy_mode=%s\n",
-+ (unsigned long)phy->phy_id,
-+ phy_modes(phy->interface));
-+
-+ phy->supported &= PHY_GBIT_FEATURES;
-+ phy->supported |= SUPPORTED_Asym_Pause | SUPPORTED_Pause;
-+ phy->advertising = phy->supported;
-+
-+ /* set PHY interface type */
-+ switch (phy->interface) {
-+ case PHY_INTERFACE_MODE_MII:
-+ netdev_info(netdev, "set GMAC0 to GMII mode, GMAC1 disabled\n");
-+ status.bits.mii_rmii = GMAC_PHY_MII;
-+ netdev_info(netdev, "connect to MII\n");
-+ break;
-+ case PHY_INTERFACE_MODE_GMII:
-+ netdev_info(netdev, "set GMAC0 to GMII mode, GMAC1 disabled\n");
-+ status.bits.mii_rmii = GMAC_PHY_GMII;
-+ netdev_info(netdev, "connect to GMII\n");
-+ break;
-+ case PHY_INTERFACE_MODE_RGMII:
-+ dev_info(dev, "set GMAC0 and GMAC1 to MII/RGMII mode\n");
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_100_10;
-+ netdev_info(netdev, "connect to RGMII\n");
-+ break;
-+ default:
-+ netdev_err(netdev, "Unsupported MII interface\n");
-+ phy_disconnect(phy);
-+ netdev->phydev = NULL;
-+ return -EINVAL;
-+ }
-+ writel(status.bits32, port->gmac_base + GMAC_STATUS);
-+
-+ return 0;
-+}
-+
-+static int gmac_pick_rx_max_len(int max_l3_len)
-+{
-+ /* index = CONFIG_MAXLEN_XXX values */
-+ static const int max_len[8] = {
-+ 1536, 1518, 1522, 1542,
-+ 9212, 10236, 1518, 1518
-+ };
-+ int i, n = 5;
-+
-+ max_l3_len += ETH_HLEN + VLAN_HLEN;
-+
-+ if (max_l3_len > max_len[n])
-+ return -1;
-+
-+ for (i = 0; i < 5; i++) {
-+ if (max_len[i] >= max_l3_len && max_len[i] < max_len[n])
-+ n = i;
-+ }
-+
-+ return n;
-+}
-+
-+static int gmac_init(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ union gmac_config0 config0 = { .bits = {
-+ .dis_tx = 1,
-+ .dis_rx = 1,
-+ .ipv4_rx_chksum = 1,
-+ .ipv6_rx_chksum = 1,
-+ .rx_err_detect = 1,
-+ .rgmm_edge = 1,
-+ .port0_chk_hwq = 1,
-+ .port1_chk_hwq = 1,
-+ .port0_chk_toeq = 1,
-+ .port1_chk_toeq = 1,
-+ .port0_chk_classq = 1,
-+ .port1_chk_classq = 1,
-+ } };
-+ union gmac_ahb_weight ahb_weight = { .bits = {
-+ .rx_weight = 1,
-+ .tx_weight = 1,
-+ .hash_weight = 1,
-+ .pre_req = 0x1f,
-+ .tq_dv_threshold = 0,
-+ } };
-+ union gmac_tx_wcr0 hw_weigh = { .bits = {
-+ .hw_tq3 = 1,
-+ .hw_tq2 = 1,
-+ .hw_tq1 = 1,
-+ .hw_tq0 = 1,
-+ } };
-+ union gmac_tx_wcr1 sw_weigh = { .bits = {
-+ .sw_tq5 = 1,
-+ .sw_tq4 = 1,
-+ .sw_tq3 = 1,
-+ .sw_tq2 = 1,
-+ .sw_tq1 = 1,
-+ .sw_tq0 = 1,
-+ } };
-+ union gmac_config1 config1 = { .bits = {
-+ .set_threshold = 16,
-+ .rel_threshold = 24,
-+ } };
-+ union gmac_config2 config2 = { .bits = {
-+ .set_threshold = 16,
-+ .rel_threshold = 32,
-+ } };
-+ union gmac_config3 config3 = { .bits = {
-+ .set_threshold = 0,
-+ .rel_threshold = 0,
-+ } };
-+ union gmac_config0 tmp;
-+ u32 val;
-+
-+ config0.bits.max_len = gmac_pick_rx_max_len(netdev->mtu);
-+ tmp.bits32 = readl(port->gmac_base + GMAC_CONFIG0);
-+ config0.bits.reserved = tmp.bits.reserved;
-+ writel(config0.bits32, port->gmac_base + GMAC_CONFIG0);
-+ writel(config1.bits32, port->gmac_base + GMAC_CONFIG1);
-+ writel(config2.bits32, port->gmac_base + GMAC_CONFIG2);
-+ writel(config3.bits32, port->gmac_base + GMAC_CONFIG3);
-+
-+ val = readl(port->dma_base + GMAC_AHB_WEIGHT_REG);
-+ writel(ahb_weight.bits32, port->dma_base + GMAC_AHB_WEIGHT_REG);
-+
-+ writel(hw_weigh.bits32,
-+ port->dma_base + GMAC_TX_WEIGHTING_CTRL_0_REG);
-+ writel(sw_weigh.bits32,
-+ port->dma_base + GMAC_TX_WEIGHTING_CTRL_1_REG);
-+
-+ port->rxq_order = DEFAULT_GMAC_RXQ_ORDER;
-+ port->txq_order = DEFAULT_GMAC_TXQ_ORDER;
-+ port->rx_coalesce_nsecs = DEFAULT_RX_COALESCE_NSECS;
-+
-+ /* Mark every quarter of the queue a packet for interrupt
-+ * in order to be able to wake up the queue if it was stopped
-+ */
-+ port->irq_every_tx_packets = 1 << (port->txq_order - 2);
-+
-+ return 0;
-+}
-+
-+static void gmac_uninit(struct net_device *netdev)
-+{
-+ if (netdev->phydev)
-+ phy_disconnect(netdev->phydev);
-+}
-+
-+static int gmac_setup_txqs(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int n_txq = netdev->num_tx_queues;
-+ struct gemini_ethernet *geth = port->geth;
-+ size_t entries = 1 << port->txq_order;
-+ struct gmac_txq *txq = port->txq;
-+ struct gmac_txdesc *desc_ring;
-+ size_t len = n_txq * entries;
-+ struct sk_buff **skb_tab;
-+ void __iomem *rwptr_reg;
-+ unsigned int r;
-+ int i;
-+
-+ rwptr_reg = port->dma_base + GMAC_SW_TX_QUEUE0_PTR_REG;
-+
-+ skb_tab = kcalloc(len, sizeof(*skb_tab), GFP_KERNEL);
-+ if (!skb_tab)
-+ return -ENOMEM;
-+
-+ desc_ring = dma_alloc_coherent(geth->dev, len * sizeof(*desc_ring),
-+ &port->txq_dma_base, GFP_KERNEL);
-+
-+ if (!desc_ring) {
-+ kfree(skb_tab);
-+ return -ENOMEM;
-+ }
-+
-+ if (port->txq_dma_base & ~DMA_Q_BASE_MASK) {
-+ dev_warn(geth->dev, "TX queue base it not aligned\n");
-+ return -ENOMEM;
-+ }
-+
-+ writel(port->txq_dma_base | port->txq_order,
-+ port->dma_base + GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+ for (i = 0; i < n_txq; i++) {
-+ txq->ring = desc_ring;
-+ txq->skb = skb_tab;
-+ txq->noirq_packets = 0;
-+
-+ r = readw(rwptr_reg);
-+ rwptr_reg += 2;
-+ writew(r, rwptr_reg);
-+ rwptr_reg += 2;
-+ txq->cptr = r;
-+
-+ txq++;
-+ desc_ring += entries;
-+ skb_tab += entries;
-+ }
-+
-+ return 0;
-+}
-+
-+static void gmac_clean_txq(struct net_device *netdev, struct gmac_txq *txq,
-+ unsigned int r)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int m = (1 << port->txq_order) - 1;
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned int c = txq->cptr;
-+ union gmac_txdesc_0 word0;
-+ union gmac_txdesc_1 word1;
-+ unsigned int hwchksum = 0;
-+ unsigned long bytes = 0;
-+ struct gmac_txdesc *txd;
-+ unsigned short nfrags;
-+ unsigned int errs = 0;
-+ unsigned int pkts = 0;
-+ unsigned int word3;
-+ dma_addr_t mapping;
-+
-+ if (c == r)
-+ return;
-+
-+ while (c != r) {
-+ txd = txq->ring + c;
-+ word0 = txd->word0;
-+ word1 = txd->word1;
-+ mapping = txd->word2.buf_adr;
-+ word3 = txd->word3.bits32;
-+
-+ dma_unmap_single(geth->dev, mapping,
-+ word0.bits.buffer_size, DMA_TO_DEVICE);
-+
-+ if (word3 & EOF_BIT)
-+ dev_kfree_skb(txq->skb[c]);
-+
-+ c++;
-+ c &= m;
-+
-+ if (!(word3 & SOF_BIT))
-+ continue;
-+
-+ if (!word0.bits.status_tx_ok) {
-+ errs++;
-+ continue;
-+ }
-+
-+ pkts++;
-+ bytes += txd->word1.bits.byte_count;
-+
-+ if (word1.bits32 & TSS_CHECKUM_ENABLE)
-+ hwchksum++;
-+
-+ nfrags = word0.bits.desc_count - 1;
-+ if (nfrags) {
-+ if (nfrags >= TX_MAX_FRAGS)
-+ nfrags = TX_MAX_FRAGS - 1;
-+
-+ u64_stats_update_begin(&port->tx_stats_syncp);
-+ port->tx_frag_stats[nfrags]++;
-+ u64_stats_update_end(&port->ir_stats_syncp);
-+ }
-+ }
-+
-+ u64_stats_update_begin(&port->ir_stats_syncp);
-+ port->stats.tx_errors += errs;
-+ port->stats.tx_packets += pkts;
-+ port->stats.tx_bytes += bytes;
-+ port->tx_hw_csummed += hwchksum;
-+ u64_stats_update_end(&port->ir_stats_syncp);
-+
-+ txq->cptr = c;
-+}
-+
-+static void gmac_cleanup_txqs(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int n_txq = netdev->num_tx_queues;
-+ struct gemini_ethernet *geth = port->geth;
-+ void __iomem *rwptr_reg;
-+ unsigned int r, i;
-+
-+ rwptr_reg = port->dma_base + GMAC_SW_TX_QUEUE0_PTR_REG;
-+
-+ for (i = 0; i < n_txq; i++) {
-+ r = readw(rwptr_reg);
-+ rwptr_reg += 2;
-+ writew(r, rwptr_reg);
-+ rwptr_reg += 2;
-+
-+ gmac_clean_txq(netdev, port->txq + i, r);
-+ }
-+ writel(0, port->dma_base + GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+ kfree(port->txq->skb);
-+ dma_free_coherent(geth->dev,
-+ n_txq * sizeof(*port->txq->ring) << port->txq_order,
-+ port->txq->ring, port->txq_dma_base);
-+}
-+
-+static int gmac_setup_rxq(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ struct nontoe_qhdr __iomem *qhdr;
-+
-+ qhdr = geth->base + TOE_DEFAULT_Q_HDR_BASE(netdev->dev_id);
-+ port->rxq_rwptr = &qhdr->word1;
-+
-+ /* Remap a slew of memory to use for the RX queue */
-+ port->rxq_ring = dma_alloc_coherent(geth->dev,
-+ sizeof(*port->rxq_ring) << port->rxq_order,
-+ &port->rxq_dma_base, GFP_KERNEL);
-+ if (!port->rxq_ring)
-+ return -ENOMEM;
-+ if (port->rxq_dma_base & ~NONTOE_QHDR0_BASE_MASK) {
-+ dev_warn(geth->dev, "RX queue base it not aligned\n");
-+ return -ENOMEM;
-+ }
-+
-+ writel(port->rxq_dma_base | port->rxq_order, &qhdr->word0);
-+ writel(0, port->rxq_rwptr);
-+ return 0;
-+}
-+
-+static struct gmac_queue_page *
-+gmac_get_queue_page(struct gemini_ethernet *geth,
-+ struct gemini_ethernet_port *port,
-+ dma_addr_t addr)
-+{
-+ struct gmac_queue_page *gpage;
-+ dma_addr_t mapping;
-+ int i;
-+
-+ /* Only look for even pages */
-+ mapping = addr & PAGE_MASK;
-+
-+ if (!geth->freeq_pages) {
-+ dev_err(geth->dev, "try to get page with no page list\n");
-+ return NULL;
-+ }
-+
-+ /* Look up a ring buffer page from virtual mapping */
-+ for (i = 0; i < geth->num_freeq_pages; i++) {
-+ gpage = &geth->freeq_pages[i];
-+ if (gpage->mapping == mapping)
-+ return gpage;
-+ }
-+
-+ return NULL;
-+}
-+
-+static void gmac_cleanup_rxq(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ struct gmac_rxdesc *rxd = port->rxq_ring;
-+ static struct gmac_queue_page *gpage;
-+ struct nontoe_qhdr __iomem *qhdr;
-+ void __iomem *dma_reg;
-+ void __iomem *ptr_reg;
-+ dma_addr_t mapping;
-+ union dma_rwptr rw;
-+ unsigned int r, w;
-+
-+ qhdr = geth->base +
-+ TOE_DEFAULT_Q_HDR_BASE(netdev->dev_id);
-+ dma_reg = &qhdr->word0;
-+ ptr_reg = &qhdr->word1;
-+
-+ rw.bits32 = readl(ptr_reg);
-+ r = rw.bits.rptr;
-+ w = rw.bits.wptr;
-+ writew(r, ptr_reg + 2);
-+
-+ writel(0, dma_reg);
-+
-+ /* Loop from read pointer to write pointer of the RX queue
-+ * and free up all pages by the queue.
-+ */
-+ while (r != w) {
-+ mapping = rxd[r].word2.buf_adr;
-+ r++;
-+ r &= ((1 << port->rxq_order) - 1);
-+
-+ if (!mapping)
-+ continue;
-+
-+ /* Freeq pointers are one page off */
-+ gpage = gmac_get_queue_page(geth, port, mapping + PAGE_SIZE);
-+ if (!gpage) {
-+ dev_err(geth->dev, "could not find page\n");
-+ continue;
-+ }
-+ /* Release the RX queue reference to the page */
-+ put_page(gpage->page);
-+ }
-+
-+ dma_free_coherent(geth->dev, sizeof(*port->rxq_ring) << port->rxq_order,
-+ port->rxq_ring, port->rxq_dma_base);
-+}
-+
-+static struct page *geth_freeq_alloc_map_page(struct gemini_ethernet *geth,
-+ int pn)
-+{
-+ struct gmac_rxdesc *freeq_entry;
-+ struct gmac_queue_page *gpage;
-+ unsigned int fpp_order;
-+ unsigned int frag_len;
-+ dma_addr_t mapping;
-+ struct page *page;
-+ int i;
-+
-+ /* First allocate and DMA map a single page */
-+ page = alloc_page(GFP_ATOMIC);
-+ if (!page)
-+ return NULL;
-+
-+ mapping = dma_map_single(geth->dev, page_address(page),
-+ PAGE_SIZE, DMA_FROM_DEVICE);
-+ if (dma_mapping_error(geth->dev, mapping)) {
-+ put_page(page);
-+ return NULL;
-+ }
-+
-+ /* The assign the page mapping (physical address) to the buffer address
-+ * in the hardware queue. PAGE_SHIFT on ARM is 12 (1 page is 4096 bytes,
-+ * 4k), and the default RX frag order is 11 (fragments are up 20 2048
-+ * bytes, 2k) so fpp_order (fragments per page order) is default 1. Thus
-+ * each page normally needs two entries in the queue.
-+ */
-+ frag_len = 1 << geth->freeq_frag_order; /* Usually 2048 */
-+ fpp_order = PAGE_SHIFT - geth->freeq_frag_order;
-+ freeq_entry = geth->freeq_ring + (pn << fpp_order);
-+ dev_dbg(geth->dev, "allocate page %d fragment length %d fragments per page %d, freeq entry %p\n",
-+ pn, frag_len, (1 << fpp_order), freeq_entry);
-+ for (i = (1 << fpp_order); i > 0; i--) {
-+ freeq_entry->word2.buf_adr = mapping;
-+ freeq_entry++;
-+ mapping += frag_len;
-+ }
-+
-+ /* If the freeq entry already has a page mapped, then unmap it. */
-+ gpage = &geth->freeq_pages[pn];
-+ if (gpage->page) {
-+ mapping = geth->freeq_ring[pn << fpp_order].word2.buf_adr;
-+ dma_unmap_single(geth->dev, mapping, frag_len, DMA_FROM_DEVICE);
-+ /* This should be the last reference to the page so it gets
-+ * released
-+ */
-+ put_page(gpage->page);
-+ }
-+
-+ /* Then put our new mapping into the page table */
-+ dev_dbg(geth->dev, "page %d, DMA addr: %08x, page %p\n",
-+ pn, (unsigned int)mapping, page);
-+ gpage->mapping = mapping;
-+ gpage->page = page;
-+
-+ return page;
-+}
-+
-+/**
-+ * geth_fill_freeq() - Fill the freeq with empty fragments to use
-+ * @geth: the ethernet adapter
-+ * @refill: whether to reset the queue by filling in all freeq entries or
-+ * just refill it, usually the interrupt to refill the queue happens when
-+ * the queue is half empty.
-+ */
-+static unsigned int geth_fill_freeq(struct gemini_ethernet *geth, bool refill)
-+{
-+ unsigned int fpp_order = PAGE_SHIFT - geth->freeq_frag_order;
-+ unsigned int count = 0;
-+ unsigned int pn, epn;
-+ unsigned long flags;
-+ union dma_rwptr rw;
-+ unsigned int m_pn;
-+
-+ /* Mask for page */
-+ m_pn = (1 << (geth->freeq_order - fpp_order)) - 1;
-+
-+ spin_lock_irqsave(&geth->freeq_lock, flags);
-+
-+ rw.bits32 = readl(geth->base + GLOBAL_SWFQ_RWPTR_REG);
-+ pn = (refill ? rw.bits.wptr : rw.bits.rptr) >> fpp_order;
-+ epn = (rw.bits.rptr >> fpp_order) - 1;
-+ epn &= m_pn;
-+
-+ /* Loop over the freeq ring buffer entries */
-+ while (pn != epn) {
-+ struct gmac_queue_page *gpage;
-+ struct page *page;
-+
-+ gpage = &geth->freeq_pages[pn];
-+ page = gpage->page;
-+
-+ dev_dbg(geth->dev, "fill entry %d page ref count %d add %d refs\n",
-+ pn, page_ref_count(page), 1 << fpp_order);
-+
-+ if (page_ref_count(page) > 1) {
-+ unsigned int fl = (pn - epn) & m_pn;
-+
-+ if (fl > 64 >> fpp_order)
-+ break;
-+
-+ page = geth_freeq_alloc_map_page(geth, pn);
-+ if (!page)
-+ break;
-+ }
-+
-+ /* Add one reference per fragment in the page */
-+ page_ref_add(page, 1 << fpp_order);
-+ count += 1 << fpp_order;
-+ pn++;
-+ pn &= m_pn;
-+ }
-+
-+ writew(pn << fpp_order, geth->base + GLOBAL_SWFQ_RWPTR_REG + 2);
-+
-+ spin_unlock_irqrestore(&geth->freeq_lock, flags);
-+
-+ return count;
-+}
-+
-+static int geth_setup_freeq(struct gemini_ethernet *geth)
-+{
-+ unsigned int fpp_order = PAGE_SHIFT - geth->freeq_frag_order;
-+ unsigned int frag_len = 1 << geth->freeq_frag_order;
-+ unsigned int len = 1 << geth->freeq_order;
-+ unsigned int pages = len >> fpp_order;
-+ union queue_threshold qt;
-+ union dma_skb_size skbsz;
-+ unsigned int filled;
-+ unsigned int pn;
-+
-+ geth->freeq_ring = dma_alloc_coherent(geth->dev,
-+ sizeof(*geth->freeq_ring) << geth->freeq_order,
-+ &geth->freeq_dma_base, GFP_KERNEL);
-+ if (!geth->freeq_ring)
-+ return -ENOMEM;
-+ if (geth->freeq_dma_base & ~DMA_Q_BASE_MASK) {
-+ dev_warn(geth->dev, "queue ring base it not aligned\n");
-+ goto err_freeq;
-+ }
-+
-+ /* Allocate a mapping to page look-up index */
-+ geth->freeq_pages = kzalloc(pages * sizeof(*geth->freeq_pages),
-+ GFP_KERNEL);
-+ if (!geth->freeq_pages)
-+ goto err_freeq;
-+ geth->num_freeq_pages = pages;
-+
-+ dev_info(geth->dev, "allocate %d pages for queue\n", pages);
-+ for (pn = 0; pn < pages; pn++)
-+ if (!geth_freeq_alloc_map_page(geth, pn))
-+ goto err_freeq_alloc;
-+
-+ filled = geth_fill_freeq(geth, false);
-+ if (!filled)
-+ goto err_freeq_alloc;
-+
-+ qt.bits32 = readl(geth->base + GLOBAL_QUEUE_THRESHOLD_REG);
-+ qt.bits.swfq_empty = 32;
-+ writel(qt.bits32, geth->base + GLOBAL_QUEUE_THRESHOLD_REG);
-+
-+ skbsz.bits.sw_skb_size = 1 << geth->freeq_frag_order;
-+ writel(skbsz.bits32, geth->base + GLOBAL_DMA_SKB_SIZE_REG);
-+ writel(geth->freeq_dma_base | geth->freeq_order,
-+ geth->base + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+
-+ return 0;
-+
-+err_freeq_alloc:
-+ while (pn > 0) {
-+ struct gmac_queue_page *gpage;
-+ dma_addr_t mapping;
-+
-+ --pn;
-+ mapping = geth->freeq_ring[pn << fpp_order].word2.buf_adr;
-+ dma_unmap_single(geth->dev, mapping, frag_len, DMA_FROM_DEVICE);
-+ gpage = &geth->freeq_pages[pn];
-+ put_page(gpage->page);
-+ }
-+
-+ kfree(geth->freeq_pages);
-+err_freeq:
-+ dma_free_coherent(geth->dev,
-+ sizeof(*geth->freeq_ring) << geth->freeq_order,
-+ geth->freeq_ring, geth->freeq_dma_base);
-+ geth->freeq_ring = NULL;
-+ return -ENOMEM;
-+}
-+
-+/**
-+ * geth_cleanup_freeq() - cleanup the DMA mappings and free the queue
-+ * @geth: the Gemini global ethernet state
-+ */
-+static void geth_cleanup_freeq(struct gemini_ethernet *geth)
-+{
-+ unsigned int fpp_order = PAGE_SHIFT - geth->freeq_frag_order;
-+ unsigned int frag_len = 1 << geth->freeq_frag_order;
-+ unsigned int len = 1 << geth->freeq_order;
-+ unsigned int pages = len >> fpp_order;
-+ unsigned int pn;
-+
-+ writew(readw(geth->base + GLOBAL_SWFQ_RWPTR_REG),
-+ geth->base + GLOBAL_SWFQ_RWPTR_REG + 2);
-+ writel(0, geth->base + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+
-+ for (pn = 0; pn < pages; pn++) {
-+ struct gmac_queue_page *gpage;
-+ dma_addr_t mapping;
-+
-+ mapping = geth->freeq_ring[pn << fpp_order].word2.buf_adr;
-+ dma_unmap_single(geth->dev, mapping, frag_len, DMA_FROM_DEVICE);
-+
-+ gpage = &geth->freeq_pages[pn];
-+ while (page_ref_count(gpage->page) > 0)
-+ put_page(gpage->page);
-+ }
-+
-+ kfree(geth->freeq_pages);
-+
-+ dma_free_coherent(geth->dev,
-+ sizeof(*geth->freeq_ring) << geth->freeq_order,
-+ geth->freeq_ring, geth->freeq_dma_base);
-+}
-+
-+/**
-+ * geth_resize_freeq() - resize the software queue depth
-+ * @port: the port requesting the change
-+ *
-+ * This gets called at least once during probe() so the device queue gets
-+ * "resized" from the hardware defaults. Since both ports/net devices share
-+ * the same hardware queue, some synchronization between the ports is
-+ * needed.
-+ */
-+static int geth_resize_freeq(struct gemini_ethernet_port *port)
-+{
-+ struct gemini_ethernet *geth = port->geth;
-+ struct net_device *netdev = port->netdev;
-+ struct gemini_ethernet_port *other_port;
-+ struct net_device *other_netdev;
-+ unsigned int new_size = 0;
-+ unsigned int new_order;
-+ unsigned long flags;
-+ u32 en;
-+ int ret;
-+
-+ if (netdev->dev_id == 0)
-+ other_netdev = geth->port1->netdev;
-+ else
-+ other_netdev = geth->port0->netdev;
-+
-+ if (other_netdev && netif_running(other_netdev))
-+ return -EBUSY;
-+
-+ new_size = 1 << (port->rxq_order + 1);
-+ netdev_dbg(netdev, "port %d size: %d order %d\n",
-+ netdev->dev_id,
-+ new_size,
-+ port->rxq_order);
-+ if (other_netdev) {
-+ other_port = netdev_priv(other_netdev);
-+ new_size += 1 << (other_port->rxq_order + 1);
-+ netdev_dbg(other_netdev, "port %d size: %d order %d\n",
-+ other_netdev->dev_id,
-+ (1 << (other_port->rxq_order + 1)),
-+ other_port->rxq_order);
-+ }
-+
-+ new_order = min(15, ilog2(new_size - 1) + 1);
-+ dev_dbg(geth->dev, "set shared queue to size %d order %d\n",
-+ new_size, new_order);
-+ if (geth->freeq_order == new_order)
-+ return 0;
-+
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+
-+ /* Disable the software queue IRQs */
-+ en = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ en &= ~SWFQ_EMPTY_INT_BIT;
-+ writel(en, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+
-+ /* Drop the old queue */
-+ if (geth->freeq_ring)
-+ geth_cleanup_freeq(geth);
-+
-+ /* Allocate a new queue with the desired order */
-+ geth->freeq_order = new_order;
-+ ret = geth_setup_freeq(geth);
-+
-+ /* Restart the interrupts - NOTE if this is the first resize
-+ * after probe(), this is where the interrupts get turned on
-+ * in the first place.
-+ */
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+ en |= SWFQ_EMPTY_INT_BIT;
-+ writel(en, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+
-+ return ret;
-+}
-+
-+static void gmac_tx_irq_enable(struct net_device *netdev,
-+ unsigned int txq, int en)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ u32 val, mask;
-+
-+ netdev_dbg(netdev, "%s device %d\n", __func__, netdev->dev_id);
-+
-+ mask = GMAC0_IRQ0_TXQ0_INTS << (6 * netdev->dev_id + txq);
-+
-+ if (en)
-+ writel(mask, geth->base + GLOBAL_INTERRUPT_STATUS_0_REG);
-+
-+ val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ val = en ? val | mask : val & ~mask;
-+ writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+}
-+
-+static void gmac_tx_irq(struct net_device *netdev, unsigned int txq_num)
-+{
-+ struct netdev_queue *ntxq = netdev_get_tx_queue(netdev, txq_num);
-+
-+ gmac_tx_irq_enable(netdev, txq_num, 0);
-+ netif_tx_wake_queue(ntxq);
-+}
-+
-+static int gmac_map_tx_bufs(struct net_device *netdev, struct sk_buff *skb,
-+ struct gmac_txq *txq, unsigned short *desc)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct skb_shared_info *skb_si = skb_shinfo(skb);
-+ unsigned short m = (1 << port->txq_order) - 1;
-+ short frag, last_frag = skb_si->nr_frags - 1;
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned int word1, word3, buflen;
-+ unsigned short w = *desc;
-+ struct gmac_txdesc *txd;
-+ skb_frag_t *skb_frag;
-+ dma_addr_t mapping;
-+ unsigned short mtu;
-+ void *buffer;
-+
-+ mtu = ETH_HLEN;
-+ mtu += netdev->mtu;
-+ if (skb->protocol == htons(ETH_P_8021Q))
-+ mtu += VLAN_HLEN;
-+
-+ word1 = skb->len;
-+ word3 = SOF_BIT;
-+
-+ if (word1 > mtu) {
-+ word1 |= TSS_MTU_ENABLE_BIT;
-+ word3 |= mtu;
-+ }
-+
-+ if (skb->ip_summed != CHECKSUM_NONE) {
-+ int tcp = 0;
-+
-+ if (skb->protocol == htons(ETH_P_IP)) {
-+ word1 |= TSS_IP_CHKSUM_BIT;
-+ tcp = ip_hdr(skb)->protocol == IPPROTO_TCP;
-+ } else { /* IPv6 */
-+ word1 |= TSS_IPV6_ENABLE_BIT;
-+ tcp = ipv6_hdr(skb)->nexthdr == IPPROTO_TCP;
-+ }
-+
-+ word1 |= tcp ? TSS_TCP_CHKSUM_BIT : TSS_UDP_CHKSUM_BIT;
-+ }
-+
-+ frag = -1;
-+ while (frag <= last_frag) {
-+ if (frag == -1) {
-+ buffer = skb->data;
-+ buflen = skb_headlen(skb);
-+ } else {
-+ skb_frag = skb_si->frags + frag;
-+ buffer = page_address(skb_frag_page(skb_frag)) +
-+ skb_frag->page_offset;
-+ buflen = skb_frag->size;
-+ }
-+
-+ if (frag == last_frag) {
-+ word3 |= EOF_BIT;
-+ txq->skb[w] = skb;
-+ }
-+
-+ mapping = dma_map_single(geth->dev, buffer, buflen,
-+ DMA_TO_DEVICE);
-+ if (dma_mapping_error(geth->dev, mapping))
-+ goto map_error;
-+
-+ txd = txq->ring + w;
-+ txd->word0.bits32 = buflen;
-+ txd->word1.bits32 = word1;
-+ txd->word2.buf_adr = mapping;
-+ txd->word3.bits32 = word3;
-+
-+ word3 &= MTU_SIZE_BIT_MASK;
-+ w++;
-+ w &= m;
-+ frag++;
-+ }
-+
-+ *desc = w;
-+ return 0;
-+
-+map_error:
-+ while (w != *desc) {
-+ w--;
-+ w &= m;
-+
-+ dma_unmap_page(geth->dev, txq->ring[w].word2.buf_adr,
-+ txq->ring[w].word0.bits.buffer_size,
-+ DMA_TO_DEVICE);
-+ }
-+ return -ENOMEM;
-+}
-+
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned short m = (1 << port->txq_order) - 1;
-+ struct netdev_queue *ntxq;
-+ unsigned short r, w, d;
-+ void __iomem *ptr_reg;
-+ struct gmac_txq *txq;
-+ int txq_num, nfrags;
-+ union dma_rwptr rw;
-+
-+ SKB_FRAG_ASSERT(skb);
-+
-+ if (skb->len >= 0x10000)
-+ goto out_drop_free;
-+
-+ txq_num = skb_get_queue_mapping(skb);
-+ ptr_reg = port->dma_base + GMAC_SW_TX_QUEUE_PTR_REG(txq_num);
-+ txq = &port->txq[txq_num];
-+ ntxq = netdev_get_tx_queue(netdev, txq_num);
-+ nfrags = skb_shinfo(skb)->nr_frags;
-+
-+ rw.bits32 = readl(ptr_reg);
-+ r = rw.bits.rptr;
-+ w = rw.bits.wptr;
-+
-+ d = txq->cptr - w - 1;
-+ d &= m;
-+
-+ if (d < nfrags + 2) {
-+ gmac_clean_txq(netdev, txq, r);
-+ d = txq->cptr - w - 1;
-+ d &= m;
-+
-+ if (d < nfrags + 2) {
-+ netif_tx_stop_queue(ntxq);
-+
-+ d = txq->cptr + nfrags + 16;
-+ d &= m;
-+ txq->ring[d].word3.bits.eofie = 1;
-+ gmac_tx_irq_enable(netdev, txq_num, 1);
-+
-+ u64_stats_update_begin(&port->tx_stats_syncp);
-+ netdev->stats.tx_fifo_errors++;
-+ u64_stats_update_end(&port->tx_stats_syncp);
-+ return NETDEV_TX_BUSY;
-+ }
-+ }
-+
-+ if (gmac_map_tx_bufs(netdev, skb, txq, &w)) {
-+ if (skb_linearize(skb))
-+ goto out_drop;
-+
-+ u64_stats_update_begin(&port->tx_stats_syncp);
-+ port->tx_frags_linearized++;
-+ u64_stats_update_end(&port->tx_stats_syncp);
-+
-+ if (gmac_map_tx_bufs(netdev, skb, txq, &w))
-+ goto out_drop_free;
-+ }
-+
-+ writew(w, ptr_reg + 2);
-+
-+ gmac_clean_txq(netdev, txq, r);
-+ return NETDEV_TX_OK;
-+
-+out_drop_free:
-+ dev_kfree_skb(skb);
-+out_drop:
-+ u64_stats_update_begin(&port->tx_stats_syncp);
-+ port->stats.tx_dropped++;
-+ u64_stats_update_end(&port->tx_stats_syncp);
-+ return NETDEV_TX_OK;
-+}
-+
-+static void gmac_tx_timeout(struct net_device *netdev)
-+{
-+ netdev_err(netdev, "Tx timeout\n");
-+ gmac_dump_dma_state(netdev);
-+}
-+
-+static void gmac_enable_irq(struct net_device *netdev, int enable)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned long flags;
-+ u32 val, mask;
-+
-+ netdev_info(netdev, "%s device %d %s\n", __func__,
-+ netdev->dev_id, enable ? "enable" : "disable");
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+
-+ mask = GMAC0_IRQ0_2 << (netdev->dev_id * 2);
-+ val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ val = enable ? (val | mask) : (val & ~mask);
-+ writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+
-+ mask = DEFAULT_Q0_INT_BIT << netdev->dev_id;
-+ val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ val = enable ? (val | mask) : (val & ~mask);
-+ writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ mask = GMAC0_IRQ4_8 << (netdev->dev_id * 8);
-+ val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ val = enable ? (val | mask) : (val & ~mask);
-+ writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+}
-+
-+static void gmac_enable_rx_irq(struct net_device *netdev, int enable)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned long flags;
-+ u32 val, mask;
-+
-+ netdev_dbg(netdev, "%s device %d %s\n", __func__, netdev->dev_id,
-+ enable ? "enable" : "disable");
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+ mask = DEFAULT_Q0_INT_BIT << netdev->dev_id;
-+
-+ val = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ val = enable ? (val | mask) : (val & ~mask);
-+ writel(val, geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+}
-+
-+static struct sk_buff *gmac_skb_if_good_frame(struct gemini_ethernet_port *port,
-+ union gmac_rxdesc_0 word0,
-+ unsigned int frame_len)
-+{
-+ unsigned int rx_csum = word0.bits.chksum_status;
-+ unsigned int rx_status = word0.bits.status;
-+ struct sk_buff *skb = NULL;
-+
-+ port->rx_stats[rx_status]++;
-+ port->rx_csum_stats[rx_csum]++;
-+
-+ if (word0.bits.derr || word0.bits.perr ||
-+ rx_status || frame_len < ETH_ZLEN ||
-+ rx_csum >= RX_CHKSUM_IP_ERR_UNKNOWN) {
-+ port->stats.rx_errors++;
-+
-+ if (frame_len < ETH_ZLEN || RX_ERROR_LENGTH(rx_status))
-+ port->stats.rx_length_errors++;
-+ if (RX_ERROR_OVER(rx_status))
-+ port->stats.rx_over_errors++;
-+ if (RX_ERROR_CRC(rx_status))
-+ port->stats.rx_crc_errors++;
-+ if (RX_ERROR_FRAME(rx_status))
-+ port->stats.rx_frame_errors++;
-+ return NULL;
-+ }
-+
-+ skb = napi_get_frags(&port->napi);
-+ if (!skb)
-+ goto update_exit;
-+
-+ if (rx_csum == RX_CHKSUM_IP_UDP_TCP_OK)
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+update_exit:
-+ port->stats.rx_bytes += frame_len;
-+ port->stats.rx_packets++;
-+ return skb;
-+}
-+
-+static unsigned int gmac_rx(struct net_device *netdev, unsigned int budget)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned short m = (1 << port->rxq_order) - 1;
-+ struct gemini_ethernet *geth = port->geth;
-+ void __iomem *ptr_reg = port->rxq_rwptr;
-+ unsigned int frame_len, frag_len;
-+ struct gmac_rxdesc *rx = NULL;
-+ struct gmac_queue_page *gpage;
-+ static struct sk_buff *skb;
-+ union gmac_rxdesc_0 word0;
-+ union gmac_rxdesc_1 word1;
-+ union gmac_rxdesc_3 word3;
-+ struct page *page = NULL;
-+ unsigned int page_offs;
-+ unsigned short r, w;
-+ union dma_rwptr rw;
-+ dma_addr_t mapping;
-+ int frag_nr = 0;
-+
-+ rw.bits32 = readl(ptr_reg);
-+ /* Reset interrupt as all packages until here are taken into account */
-+ writel(DEFAULT_Q0_INT_BIT << netdev->dev_id,
-+ geth->base + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ r = rw.bits.rptr;
-+ w = rw.bits.wptr;
-+
-+ while (budget && w != r) {
-+ rx = port->rxq_ring + r;
-+ word0 = rx->word0;
-+ word1 = rx->word1;
-+ mapping = rx->word2.buf_adr;
-+ word3 = rx->word3;
-+
-+ r++;
-+ r &= m;
-+
-+ frag_len = word0.bits.buffer_size;
-+ frame_len = word1.bits.byte_count;
-+ page_offs = mapping & ~PAGE_MASK;
-+
-+ if (!mapping) {
-+ netdev_err(netdev,
-+ "rxq[%u]: HW BUG: zero DMA desc\n", r);
-+ goto err_drop;
-+ }
-+
-+ /* Freeq pointers are one page off */
-+ gpage = gmac_get_queue_page(geth, port, mapping + PAGE_SIZE);
-+ if (!gpage) {
-+ dev_err(geth->dev, "could not find mapping\n");
-+ continue;
-+ }
-+ page = gpage->page;
-+
-+ if (word3.bits32 & SOF_BIT) {
-+ if (skb) {
-+ napi_free_frags(&port->napi);
-+ port->stats.rx_dropped++;
-+ }
-+
-+ skb = gmac_skb_if_good_frame(port, word0, frame_len);
-+ if (!skb)
-+ goto err_drop;
-+
-+ page_offs += NET_IP_ALIGN;
-+ frag_len -= NET_IP_ALIGN;
-+ frag_nr = 0;
-+
-+ } else if (!skb) {
-+ put_page(page);
-+ continue;
-+ }
-+
-+ if (word3.bits32 & EOF_BIT)
-+ frag_len = frame_len - skb->len;
-+
-+ /* append page frag to skb */
-+ if (frag_nr == MAX_SKB_FRAGS)
-+ goto err_drop;
-+
-+ if (frag_len == 0)
-+ netdev_err(netdev, "Received fragment with len = 0\n");
-+
-+ skb_fill_page_desc(skb, frag_nr, page, page_offs, frag_len);
-+ skb->len += frag_len;
-+ skb->data_len += frag_len;
-+ skb->truesize += frag_len;
-+ frag_nr++;
-+
-+ if (word3.bits32 & EOF_BIT) {
-+ napi_gro_frags(&port->napi);
-+ skb = NULL;
-+ --budget;
-+ }
-+ continue;
-+
-+err_drop:
-+ if (skb) {
-+ napi_free_frags(&port->napi);
-+ skb = NULL;
-+ }
-+
-+ if (mapping)
-+ put_page(page);
-+
-+ port->stats.rx_dropped++;
-+ }
-+
-+ writew(r, ptr_reg);
-+ return budget;
-+}
-+
-+static int gmac_napi_poll(struct napi_struct *napi, int budget)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(napi->dev);
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned int freeq_threshold;
-+ unsigned int received;
-+
-+ freeq_threshold = 1 << (geth->freeq_order - 1);
-+ u64_stats_update_begin(&port->rx_stats_syncp);
-+
-+ received = gmac_rx(napi->dev, budget);
-+ if (received < budget) {
-+ napi_gro_flush(napi, false);
-+ napi_complete_done(napi, received);
-+ gmac_enable_rx_irq(napi->dev, 1);
-+ ++port->rx_napi_exits;
-+ }
-+
-+ port->freeq_refill += (budget - received);
-+ if (port->freeq_refill > freeq_threshold) {
-+ port->freeq_refill -= freeq_threshold;
-+ geth_fill_freeq(geth, true);
-+ }
-+
-+ u64_stats_update_end(&port->rx_stats_syncp);
-+ return received;
-+}
-+
-+static void gmac_dump_dma_state(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ void __iomem *ptr_reg;
-+ u32 reg[5];
-+
-+ /* Interrupt status */
-+ reg[0] = readl(geth->base + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ reg[1] = readl(geth->base + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ reg[2] = readl(geth->base + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ reg[3] = readl(geth->base + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ reg[4] = readl(geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ netdev_err(netdev, "IRQ status: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+ reg[0], reg[1], reg[2], reg[3], reg[4]);
-+
-+ /* Interrupt enable */
-+ reg[0] = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ reg[1] = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ reg[2] = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+ reg[3] = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+ reg[4] = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ netdev_err(netdev, "IRQ enable: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+ reg[0], reg[1], reg[2], reg[3], reg[4]);
-+
-+ /* RX DMA status */
-+ reg[0] = readl(port->dma_base + GMAC_DMA_RX_FIRST_DESC_REG);
-+ reg[1] = readl(port->dma_base + GMAC_DMA_RX_CURR_DESC_REG);
-+ reg[2] = GET_RPTR(port->rxq_rwptr);
-+ reg[3] = GET_WPTR(port->rxq_rwptr);
-+ netdev_err(netdev, "RX DMA regs: 0x%08x 0x%08x, ptr: %u %u\n",
-+ reg[0], reg[1], reg[2], reg[3]);
-+
-+ reg[0] = readl(port->dma_base + GMAC_DMA_RX_DESC_WORD0_REG);
-+ reg[1] = readl(port->dma_base + GMAC_DMA_RX_DESC_WORD1_REG);
-+ reg[2] = readl(port->dma_base + GMAC_DMA_RX_DESC_WORD2_REG);
-+ reg[3] = readl(port->dma_base + GMAC_DMA_RX_DESC_WORD3_REG);
-+ netdev_err(netdev, "RX DMA descriptor: 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+ reg[0], reg[1], reg[2], reg[3]);
-+
-+ /* TX DMA status */
-+ ptr_reg = port->dma_base + GMAC_SW_TX_QUEUE0_PTR_REG;
-+
-+ reg[0] = readl(port->dma_base + GMAC_DMA_TX_FIRST_DESC_REG);
-+ reg[1] = readl(port->dma_base + GMAC_DMA_TX_CURR_DESC_REG);
-+ reg[2] = GET_RPTR(ptr_reg);
-+ reg[3] = GET_WPTR(ptr_reg);
-+ netdev_err(netdev, "TX DMA regs: 0x%08x 0x%08x, ptr: %u %u\n",
-+ reg[0], reg[1], reg[2], reg[3]);
-+
-+ reg[0] = readl(port->dma_base + GMAC_DMA_TX_DESC_WORD0_REG);
-+ reg[1] = readl(port->dma_base + GMAC_DMA_TX_DESC_WORD1_REG);
-+ reg[2] = readl(port->dma_base + GMAC_DMA_TX_DESC_WORD2_REG);
-+ reg[3] = readl(port->dma_base + GMAC_DMA_TX_DESC_WORD3_REG);
-+ netdev_err(netdev, "TX DMA descriptor: 0x%08x 0x%08x 0x%08x 0x%08x\n",
-+ reg[0], reg[1], reg[2], reg[3]);
-+
-+ /* FREE queues status */
-+ ptr_reg = geth->base + GLOBAL_SWFQ_RWPTR_REG;
-+
-+ reg[0] = GET_RPTR(ptr_reg);
-+ reg[1] = GET_WPTR(ptr_reg);
-+
-+ ptr_reg = geth->base + GLOBAL_HWFQ_RWPTR_REG;
-+
-+ reg[2] = GET_RPTR(ptr_reg);
-+ reg[3] = GET_WPTR(ptr_reg);
-+ netdev_err(netdev, "FQ SW ptr: %u %u, HW ptr: %u %u\n",
-+ reg[0], reg[1], reg[2], reg[3]);
-+}
-+
-+static void gmac_update_hw_stats(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int rx_discards, rx_mcast, rx_bcast;
-+ struct gemini_ethernet *geth = port->geth;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+ u64_stats_update_begin(&port->ir_stats_syncp);
-+
-+ rx_discards = readl(port->gmac_base + GMAC_IN_DISCARDS);
-+ port->hw_stats[0] += rx_discards;
-+ port->hw_stats[1] += readl(port->gmac_base + GMAC_IN_ERRORS);
-+ rx_mcast = readl(port->gmac_base + GMAC_IN_MCAST);
-+ port->hw_stats[2] += rx_mcast;
-+ rx_bcast = readl(port->gmac_base + GMAC_IN_BCAST);
-+ port->hw_stats[3] += rx_bcast;
-+ port->hw_stats[4] += readl(port->gmac_base + GMAC_IN_MAC1);
-+ port->hw_stats[5] += readl(port->gmac_base + GMAC_IN_MAC2);
-+
-+ port->stats.rx_missed_errors += rx_discards;
-+ port->stats.multicast += rx_mcast;
-+ port->stats.multicast += rx_bcast;
-+
-+ writel(GMAC0_MIB_INT_BIT << (netdev->dev_id * 8),
-+ geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ u64_stats_update_end(&port->ir_stats_syncp);
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+}
-+
-+/**
-+ * gmac_get_intr_flags() - get interrupt status flags for a port from
-+ * @netdev: the net device for the port to get flags from
-+ * @i: the interrupt status register 0..4
-+ */
-+static u32 gmac_get_intr_flags(struct net_device *netdev, int i)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ struct gemini_ethernet *geth = port->geth;
-+ void __iomem *irqif_reg, *irqen_reg;
-+ unsigned int offs, val;
-+
-+ /* Calculate the offset using the stride of the status registers */
-+ offs = i * (GLOBAL_INTERRUPT_STATUS_1_REG -
-+ GLOBAL_INTERRUPT_STATUS_0_REG);
-+
-+ irqif_reg = geth->base + GLOBAL_INTERRUPT_STATUS_0_REG + offs;
-+ irqen_reg = geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG + offs;
-+
-+ val = readl(irqif_reg) & readl(irqen_reg);
-+ return val;
-+}
-+
-+static enum hrtimer_restart gmac_coalesce_delay_expired(struct hrtimer *timer)
-+{
-+ struct gemini_ethernet_port *port =
-+ container_of(timer, struct gemini_ethernet_port,
-+ rx_coalesce_timer);
-+
-+ napi_schedule(&port->napi);
-+ return HRTIMER_NORESTART;
-+}
-+
-+static irqreturn_t gmac_irq(int irq, void *data)
-+{
-+ struct gemini_ethernet_port *port;
-+ struct net_device *netdev = data;
-+ struct gemini_ethernet *geth;
-+ u32 val, orr = 0;
-+
-+ port = netdev_priv(netdev);
-+ geth = port->geth;
-+
-+ val = gmac_get_intr_flags(netdev, 0);
-+ orr |= val;
-+
-+ if (val & (GMAC0_IRQ0_2 << (netdev->dev_id * 2))) {
-+ /* Oh, crap */
-+ netdev_err(netdev, "hw failure/sw bug\n");
-+ gmac_dump_dma_state(netdev);
-+
-+ /* don't know how to recover, just reduce losses */
-+ gmac_enable_irq(netdev, 0);
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (val & (GMAC0_IRQ0_TXQ0_INTS << (netdev->dev_id * 6)))
-+ gmac_tx_irq(netdev, 0);
-+
-+ val = gmac_get_intr_flags(netdev, 1);
-+ orr |= val;
-+
-+ if (val & (DEFAULT_Q0_INT_BIT << netdev->dev_id)) {
-+ gmac_enable_rx_irq(netdev, 0);
-+
-+ if (!port->rx_coalesce_nsecs) {
-+ napi_schedule(&port->napi);
-+ } else {
-+ ktime_t ktime;
-+
-+ ktime = ktime_set(0, port->rx_coalesce_nsecs);
-+ hrtimer_start(&port->rx_coalesce_timer, ktime,
-+ HRTIMER_MODE_REL);
-+ }
-+ }
-+
-+ val = gmac_get_intr_flags(netdev, 4);
-+ orr |= val;
-+
-+ if (val & (GMAC0_MIB_INT_BIT << (netdev->dev_id * 8)))
-+ gmac_update_hw_stats(netdev);
-+
-+ if (val & (GMAC0_RX_OVERRUN_INT_BIT << (netdev->dev_id * 8))) {
-+ writel(GMAC0_RXDERR_INT_BIT << (netdev->dev_id * 8),
-+ geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ spin_lock(&geth->irq_lock);
-+ u64_stats_update_begin(&port->ir_stats_syncp);
-+ ++port->stats.rx_fifo_errors;
-+ u64_stats_update_end(&port->ir_stats_syncp);
-+ spin_unlock(&geth->irq_lock);
-+ }
-+
-+ return orr ? IRQ_HANDLED : IRQ_NONE;
-+}
-+
-+static void gmac_start_dma(struct gemini_ethernet_port *port)
-+{
-+ void __iomem *dma_ctrl_reg = port->dma_base + GMAC_DMA_CTRL_REG;
-+ union gmac_dma_ctrl dma_ctrl;
-+
-+ dma_ctrl.bits32 = readl(dma_ctrl_reg);
-+ dma_ctrl.bits.rd_enable = 1;
-+ dma_ctrl.bits.td_enable = 1;
-+ dma_ctrl.bits.loopback = 0;
-+ dma_ctrl.bits.drop_small_ack = 0;
-+ dma_ctrl.bits.rd_insert_bytes = NET_IP_ALIGN;
-+ dma_ctrl.bits.rd_prot = HPROT_DATA_CACHE | HPROT_PRIVILIGED;
-+ dma_ctrl.bits.rd_burst_size = HBURST_INCR8;
-+ dma_ctrl.bits.rd_bus = HSIZE_8;
-+ dma_ctrl.bits.td_prot = HPROT_DATA_CACHE;
-+ dma_ctrl.bits.td_burst_size = HBURST_INCR8;
-+ dma_ctrl.bits.td_bus = HSIZE_8;
-+
-+ writel(dma_ctrl.bits32, dma_ctrl_reg);
-+}
-+
-+static void gmac_stop_dma(struct gemini_ethernet_port *port)
-+{
-+ void __iomem *dma_ctrl_reg = port->dma_base + GMAC_DMA_CTRL_REG;
-+ union gmac_dma_ctrl dma_ctrl;
-+
-+ dma_ctrl.bits32 = readl(dma_ctrl_reg);
-+ dma_ctrl.bits.rd_enable = 0;
-+ dma_ctrl.bits.td_enable = 0;
-+ writel(dma_ctrl.bits32, dma_ctrl_reg);
-+}
-+
-+static int gmac_open(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ int err;
-+
-+ if (!netdev->phydev) {
-+ err = gmac_setup_phy(netdev);
-+ if (err) {
-+ netif_err(port, ifup, netdev,
-+ "PHY init failed: %d\n", err);
-+ return err;
-+ }
-+ }
-+
-+ err = request_irq(netdev->irq, gmac_irq,
-+ IRQF_SHARED, netdev->name, netdev);
-+ if (err) {
-+ netdev_err(netdev, "no IRQ\n");
-+ return err;
-+ }
-+
-+ netif_carrier_off(netdev);
-+ phy_start(netdev->phydev);
-+
-+ err = geth_resize_freeq(port);
-+ if (err) {
-+ netdev_err(netdev, "could not resize freeq\n");
-+ goto err_stop_phy;
-+ }
-+
-+ err = gmac_setup_rxq(netdev);
-+ if (err) {
-+ netdev_err(netdev, "could not setup RXQ\n");
-+ goto err_stop_phy;
-+ }
-+
-+ err = gmac_setup_txqs(netdev);
-+ if (err) {
-+ netdev_err(netdev, "could not setup TXQs\n");
-+ gmac_cleanup_rxq(netdev);
-+ goto err_stop_phy;
-+ }
-+
-+ napi_enable(&port->napi);
-+
-+ gmac_start_dma(port);
-+ gmac_enable_irq(netdev, 1);
-+ gmac_enable_tx_rx(netdev);
-+ netif_tx_start_all_queues(netdev);
-+
-+ hrtimer_init(&port->rx_coalesce_timer, CLOCK_MONOTONIC,
-+ HRTIMER_MODE_REL);
-+ port->rx_coalesce_timer.function = &gmac_coalesce_delay_expired;
-+
-+ netdev_info(netdev, "opened\n");
-+
-+ return 0;
-+
-+err_stop_phy:
-+ phy_stop(netdev->phydev);
-+ free_irq(netdev->irq, netdev);
-+ return err;
-+}
-+
-+static int gmac_stop(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ hrtimer_cancel(&port->rx_coalesce_timer);
-+ netif_tx_stop_all_queues(netdev);
-+ gmac_disable_tx_rx(netdev);
-+ gmac_stop_dma(port);
-+ napi_disable(&port->napi);
-+
-+ gmac_enable_irq(netdev, 0);
-+ gmac_cleanup_rxq(netdev);
-+ gmac_cleanup_txqs(netdev);
-+
-+ phy_stop(netdev->phydev);
-+ free_irq(netdev->irq, netdev);
-+
-+ gmac_update_hw_stats(netdev);
-+ return 0;
-+}
-+
-+static void gmac_set_rx_mode(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ union gmac_rx_fltr filter = { .bits = {
-+ .broadcast = 1,
-+ .multicast = 1,
-+ .unicast = 1,
-+ } };
-+ struct netdev_hw_addr *ha;
-+ unsigned int bit_nr;
-+ u32 mc_filter[2];
-+
-+ mc_filter[1] = 0;
-+ mc_filter[0] = 0;
-+
-+ if (netdev->flags & IFF_PROMISC) {
-+ filter.bits.error = 1;
-+ filter.bits.promiscuous = 1;
-+ mc_filter[1] = ~0;
-+ mc_filter[0] = ~0;
-+ } else if (netdev->flags & IFF_ALLMULTI) {
-+ mc_filter[1] = ~0;
-+ mc_filter[0] = ~0;
-+ } else {
-+ netdev_for_each_mc_addr(ha, netdev) {
-+ bit_nr = ~crc32_le(~0, ha->addr, ETH_ALEN) & 0x3f;
-+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 0x1f);
-+ }
-+ }
-+
-+ writel(mc_filter[0], port->gmac_base + GMAC_MCAST_FIL0);
-+ writel(mc_filter[1], port->gmac_base + GMAC_MCAST_FIL1);
-+ writel(filter.bits32, port->gmac_base + GMAC_RX_FLTR);
-+}
-+
-+static void gmac_write_mac_address(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ __le32 addr[3];
-+
-+ memset(addr, 0, sizeof(addr));
-+ memcpy(addr, netdev->dev_addr, ETH_ALEN);
-+
-+ writel(le32_to_cpu(addr[0]), port->gmac_base + GMAC_STA_ADD0);
-+ writel(le32_to_cpu(addr[1]), port->gmac_base + GMAC_STA_ADD1);
-+ writel(le32_to_cpu(addr[2]), port->gmac_base + GMAC_STA_ADD2);
-+}
-+
-+static int gmac_set_mac_address(struct net_device *netdev, void *addr)
-+{
-+ struct sockaddr *sa = addr;
-+
-+ memcpy(netdev->dev_addr, sa->sa_data, ETH_ALEN);
-+ gmac_write_mac_address(netdev);
-+
-+ return 0;
-+}
-+
-+static void gmac_clear_hw_stats(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ readl(port->gmac_base + GMAC_IN_DISCARDS);
-+ readl(port->gmac_base + GMAC_IN_ERRORS);
-+ readl(port->gmac_base + GMAC_IN_MCAST);
-+ readl(port->gmac_base + GMAC_IN_BCAST);
-+ readl(port->gmac_base + GMAC_IN_MAC1);
-+ readl(port->gmac_base + GMAC_IN_MAC2);
-+}
-+
-+static void gmac_get_stats64(struct net_device *netdev,
-+ struct rtnl_link_stats64 *stats)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int start;
-+
-+ gmac_update_hw_stats(netdev);
-+
-+ /* Racing with RX NAPI */
-+ do {
-+ start = u64_stats_fetch_begin(&port->rx_stats_syncp);
-+
-+ stats->rx_packets = port->stats.rx_packets;
-+ stats->rx_bytes = port->stats.rx_bytes;
-+ stats->rx_errors = port->stats.rx_errors;
-+ stats->rx_dropped = port->stats.rx_dropped;
-+
-+ stats->rx_length_errors = port->stats.rx_length_errors;
-+ stats->rx_over_errors = port->stats.rx_over_errors;
-+ stats->rx_crc_errors = port->stats.rx_crc_errors;
-+ stats->rx_frame_errors = port->stats.rx_frame_errors;
-+
-+ } while (u64_stats_fetch_retry(&port->rx_stats_syncp, start));
-+
-+ /* Racing with MIB and TX completion interrupts */
-+ do {
-+ start = u64_stats_fetch_begin(&port->ir_stats_syncp);
-+
-+ stats->tx_errors = port->stats.tx_errors;
-+ stats->tx_packets = port->stats.tx_packets;
-+ stats->tx_bytes = port->stats.tx_bytes;
-+
-+ stats->multicast = port->stats.multicast;
-+ stats->rx_missed_errors = port->stats.rx_missed_errors;
-+ stats->rx_fifo_errors = port->stats.rx_fifo_errors;
-+
-+ } while (u64_stats_fetch_retry(&port->ir_stats_syncp, start));
-+
-+ /* Racing with hard_start_xmit */
-+ do {
-+ start = u64_stats_fetch_begin(&port->tx_stats_syncp);
-+
-+ stats->tx_dropped = port->stats.tx_dropped;
-+
-+ } while (u64_stats_fetch_retry(&port->tx_stats_syncp, start));
-+
-+ stats->rx_dropped += stats->rx_missed_errors;
-+}
-+
-+static int gmac_change_mtu(struct net_device *netdev, int new_mtu)
-+{
-+ int max_len = gmac_pick_rx_max_len(new_mtu);
-+
-+ if (max_len < 0)
-+ return -EINVAL;
-+
-+ gmac_disable_tx_rx(netdev);
-+
-+ netdev->mtu = new_mtu;
-+ gmac_update_config0_reg(netdev, max_len << CONFIG0_MAXLEN_SHIFT,
-+ CONFIG0_MAXLEN_MASK);
-+
-+ netdev_update_features(netdev);
-+
-+ gmac_enable_tx_rx(netdev);
-+
-+ return 0;
-+}
-+
-+static netdev_features_t gmac_fix_features(struct net_device *netdev,
-+ netdev_features_t features)
-+{
-+ if (netdev->mtu + ETH_HLEN + VLAN_HLEN > MTU_SIZE_BIT_MASK)
-+ features &= ~GMAC_OFFLOAD_FEATURES;
-+
-+ return features;
-+}
-+
-+static int gmac_set_features(struct net_device *netdev,
-+ netdev_features_t features)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ int enable = features & NETIF_F_RXCSUM;
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(&port->config_lock, flags);
-+
-+ reg = readl(port->gmac_base + GMAC_CONFIG0);
-+ reg = enable ? reg | CONFIG0_RX_CHKSUM : reg & ~CONFIG0_RX_CHKSUM;
-+ writel(reg, port->gmac_base + GMAC_CONFIG0);
-+
-+ spin_unlock_irqrestore(&port->config_lock, flags);
-+ return 0;
-+}
-+
-+static int gmac_get_sset_count(struct net_device *netdev, int sset)
-+{
-+ return sset == ETH_SS_STATS ? GMAC_STATS_NUM : 0;
-+}
-+
-+static void gmac_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-+{
-+ if (stringset != ETH_SS_STATS)
-+ return;
-+
-+ memcpy(data, gmac_stats_strings, sizeof(gmac_stats_strings));
-+}
-+
-+static void gmac_get_ethtool_stats(struct net_device *netdev,
-+ struct ethtool_stats *estats, u64 *values)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ unsigned int start;
-+ u64 *p;
-+ int i;
-+
-+ gmac_update_hw_stats(netdev);
-+
-+ /* Racing with MIB interrupt */
-+ do {
-+ p = values;
-+ start = u64_stats_fetch_begin(&port->ir_stats_syncp);
-+
-+ for (i = 0; i < RX_STATS_NUM; i++)
-+ *p++ = port->hw_stats[i];
-+
-+ } while (u64_stats_fetch_retry(&port->ir_stats_syncp, start));
-+ values = p;
-+
-+ /* Racing with RX NAPI */
-+ do {
-+ p = values;
-+ start = u64_stats_fetch_begin(&port->rx_stats_syncp);
-+
-+ for (i = 0; i < RX_STATUS_NUM; i++)
-+ *p++ = port->rx_stats[i];
-+ for (i = 0; i < RX_CHKSUM_NUM; i++)
-+ *p++ = port->rx_csum_stats[i];
-+ *p++ = port->rx_napi_exits;
-+
-+ } while (u64_stats_fetch_retry(&port->rx_stats_syncp, start));
-+ values = p;
-+
-+ /* Racing with TX start_xmit */
-+ do {
-+ p = values;
-+ start = u64_stats_fetch_begin(&port->tx_stats_syncp);
-+
-+ for (i = 0; i < TX_MAX_FRAGS; i++) {
-+ *values++ = port->tx_frag_stats[i];
-+ port->tx_frag_stats[i] = 0;
-+ }
-+ *values++ = port->tx_frags_linearized;
-+ *values++ = port->tx_hw_csummed;
-+
-+ } while (u64_stats_fetch_retry(&port->tx_stats_syncp, start));
-+}
-+
-+static int gmac_get_ksettings(struct net_device *netdev,
-+ struct ethtool_link_ksettings *cmd)
-+{
-+ if (!netdev->phydev)
-+ return -ENXIO;
-+ phy_ethtool_ksettings_get(netdev->phydev, cmd);
-+
-+ return 0;
-+}
-+
-+static int gmac_set_ksettings(struct net_device *netdev,
-+ const struct ethtool_link_ksettings *cmd)
-+{
-+ if (!netdev->phydev)
-+ return -ENXIO;
-+ return phy_ethtool_ksettings_set(netdev->phydev, cmd);
-+}
-+
-+static int gmac_nway_reset(struct net_device *netdev)
-+{
-+ if (!netdev->phydev)
-+ return -ENXIO;
-+ return phy_start_aneg(netdev->phydev);
-+}
-+
-+static void gmac_get_pauseparam(struct net_device *netdev,
-+ struct ethtool_pauseparam *pparam)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ union gmac_config0 config0;
-+
-+ config0.bits32 = readl(port->gmac_base + GMAC_CONFIG0);
-+
-+ pparam->rx_pause = config0.bits.rx_fc_en;
-+ pparam->tx_pause = config0.bits.tx_fc_en;
-+ pparam->autoneg = true;
-+}
-+
-+static void gmac_get_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *rp)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ union gmac_config0 config0;
-+
-+ config0.bits32 = readl(port->gmac_base + GMAC_CONFIG0);
-+
-+ rp->rx_max_pending = 1 << 15;
-+ rp->rx_mini_max_pending = 0;
-+ rp->rx_jumbo_max_pending = 0;
-+ rp->tx_max_pending = 1 << 15;
-+
-+ rp->rx_pending = 1 << port->rxq_order;
-+ rp->rx_mini_pending = 0;
-+ rp->rx_jumbo_pending = 0;
-+ rp->tx_pending = 1 << port->txq_order;
-+}
-+
-+static int gmac_set_ringparam(struct net_device *netdev,
-+ struct ethtool_ringparam *rp)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+ int err = 0;
-+
-+ if (netif_running(netdev))
-+ return -EBUSY;
-+
-+ if (rp->rx_pending) {
-+ port->rxq_order = min(15, ilog2(rp->rx_pending - 1) + 1);
-+ err = geth_resize_freeq(port);
-+ }
-+ if (rp->tx_pending) {
-+ port->txq_order = min(15, ilog2(rp->tx_pending - 1) + 1);
-+ port->irq_every_tx_packets = 1 << (port->txq_order - 2);
-+ }
-+
-+ return err;
-+}
-+
-+static int gmac_get_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ecmd)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ ecmd->rx_max_coalesced_frames = 1;
-+ ecmd->tx_max_coalesced_frames = port->irq_every_tx_packets;
-+ ecmd->rx_coalesce_usecs = port->rx_coalesce_nsecs / 1000;
-+
-+ return 0;
-+}
-+
-+static int gmac_set_coalesce(struct net_device *netdev,
-+ struct ethtool_coalesce *ecmd)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ if (ecmd->tx_max_coalesced_frames < 1)
-+ return -EINVAL;
-+ if (ecmd->tx_max_coalesced_frames >= 1 << port->txq_order)
-+ return -EINVAL;
-+
-+ port->irq_every_tx_packets = ecmd->tx_max_coalesced_frames;
-+ port->rx_coalesce_nsecs = ecmd->rx_coalesce_usecs * 1000;
-+
-+ return 0;
-+}
-+
-+static u32 gmac_get_msglevel(struct net_device *netdev)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ return port->msg_enable;
-+}
-+
-+static void gmac_set_msglevel(struct net_device *netdev, u32 level)
-+{
-+ struct gemini_ethernet_port *port = netdev_priv(netdev);
-+
-+ port->msg_enable = level;
-+}
-+
-+static void gmac_get_drvinfo(struct net_device *netdev,
-+ struct ethtool_drvinfo *info)
-+{
-+ strcpy(info->driver, DRV_NAME);
-+ strcpy(info->version, DRV_VERSION);
-+ strcpy(info->bus_info, netdev->dev_id ? "1" : "0");
-+}
-+
-+static const struct net_device_ops gmac_351x_ops = {
-+ .ndo_init = gmac_init,
-+ .ndo_uninit = gmac_uninit,
-+ .ndo_open = gmac_open,
-+ .ndo_stop = gmac_stop,
-+ .ndo_start_xmit = gmac_start_xmit,
-+ .ndo_tx_timeout = gmac_tx_timeout,
-+ .ndo_set_rx_mode = gmac_set_rx_mode,
-+ .ndo_set_mac_address = gmac_set_mac_address,
-+ .ndo_get_stats64 = gmac_get_stats64,
-+ .ndo_change_mtu = gmac_change_mtu,
-+ .ndo_fix_features = gmac_fix_features,
-+ .ndo_set_features = gmac_set_features,
-+};
-+
-+static const struct ethtool_ops gmac_351x_ethtool_ops = {
-+ .get_sset_count = gmac_get_sset_count,
-+ .get_strings = gmac_get_strings,
-+ .get_ethtool_stats = gmac_get_ethtool_stats,
-+ .get_link = ethtool_op_get_link,
-+ .get_link_ksettings = gmac_get_ksettings,
-+ .set_link_ksettings = gmac_set_ksettings,
-+ .nway_reset = gmac_nway_reset,
-+ .get_pauseparam = gmac_get_pauseparam,
-+ .get_ringparam = gmac_get_ringparam,
-+ .set_ringparam = gmac_set_ringparam,
-+ .get_coalesce = gmac_get_coalesce,
-+ .set_coalesce = gmac_set_coalesce,
-+ .get_msglevel = gmac_get_msglevel,
-+ .set_msglevel = gmac_set_msglevel,
-+ .get_drvinfo = gmac_get_drvinfo,
-+};
-+
-+static irqreturn_t gemini_port_irq_thread(int irq, void *data)
-+{
-+ unsigned long irqmask = SWFQ_EMPTY_INT_BIT;
-+ struct gemini_ethernet_port *port = data;
-+ struct gemini_ethernet *geth;
-+ unsigned long flags;
-+
-+ geth = port->geth;
-+ /* The queue is half empty so refill it */
-+ geth_fill_freeq(geth, true);
-+
-+ spin_lock_irqsave(&geth->irq_lock, flags);
-+ /* ACK queue interrupt */
-+ writel(irqmask, geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ /* Enable queue interrupt again */
-+ irqmask |= readl(geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ writel(irqmask, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ spin_unlock_irqrestore(&geth->irq_lock, flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t gemini_port_irq(int irq, void *data)
-+{
-+ struct gemini_ethernet_port *port = data;
-+ struct gemini_ethernet *geth;
-+ irqreturn_t ret = IRQ_NONE;
-+ u32 val, en;
-+
-+ geth = port->geth;
-+ spin_lock(&geth->irq_lock);
-+
-+ val = readl(geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ en = readl(geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ if (val & en & SWFQ_EMPTY_INT_BIT) {
-+ /* Disable the queue empty interrupt while we work on
-+ * processing the queue. Also disable overrun interrupts
-+ * as there is not much we can do about it here.
-+ */
-+ en &= ~(SWFQ_EMPTY_INT_BIT | GMAC0_RX_OVERRUN_INT_BIT
-+ | GMAC1_RX_OVERRUN_INT_BIT);
-+ writel(en, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ ret = IRQ_WAKE_THREAD;
-+ }
-+
-+ spin_unlock(&geth->irq_lock);
-+
-+ return ret;
-+}
-+
-+static void gemini_port_remove(struct gemini_ethernet_port *port)
-+{
-+ if (port->netdev)
-+ unregister_netdev(port->netdev);
-+ clk_disable_unprepare(port->pclk);
-+ geth_cleanup_freeq(port->geth);
-+}
-+
-+static void gemini_ethernet_init(struct gemini_ethernet *geth)
-+{
-+ writel(0, geth->base + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ writel(0, geth->base + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ writel(0, geth->base + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+ writel(0, geth->base + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+ writel(0, geth->base + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ /* Interrupt config:
-+ *
-+ * GMAC0 intr bits ------> int0 ----> eth0
-+ * GMAC1 intr bits ------> int1 ----> eth1
-+ * TOE intr -------------> int1 ----> eth1
-+ * Classification Intr --> int0 ----> eth0
-+ * Default Q0 -----------> int0 ----> eth0
-+ * Default Q1 -----------> int1 ----> eth1
-+ * FreeQ intr -----------> int1 ----> eth1
-+ */
-+ writel(0xCCFC0FC0, geth->base + GLOBAL_INTERRUPT_SELECT_0_REG);
-+ writel(0x00F00002, geth->base + GLOBAL_INTERRUPT_SELECT_1_REG);
-+ writel(0xFFFFFFFF, geth->base + GLOBAL_INTERRUPT_SELECT_2_REG);
-+ writel(0xFFFFFFFF, geth->base + GLOBAL_INTERRUPT_SELECT_3_REG);
-+ writel(0xFF000003, geth->base + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+ /* edge-triggered interrupts packed to level-triggered one... */
-+ writel(~0, geth->base + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ writel(~0, geth->base + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ writel(~0, geth->base + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ writel(~0, geth->base + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ writel(~0, geth->base + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ /* Set up queue */
-+ writel(0, geth->base + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+ writel(0, geth->base + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+ writel(0, geth->base + GLOBAL_SWFQ_RWPTR_REG);
-+ writel(0, geth->base + GLOBAL_HWFQ_RWPTR_REG);
-+
-+ geth->freeq_frag_order = DEFAULT_RX_BUF_ORDER;
-+ /* This makes the queue resize on probe() so that we
-+ * set up and enable the queue IRQ. FIXME: fragile.
-+ */
-+ geth->freeq_order = 1;
-+}
-+
-+static void gemini_port_save_mac_addr(struct gemini_ethernet_port *port)
-+{
-+ port->mac_addr[0] =
-+ cpu_to_le32(readl(port->gmac_base + GMAC_STA_ADD0));
-+ port->mac_addr[1] =
-+ cpu_to_le32(readl(port->gmac_base + GMAC_STA_ADD1));
-+ port->mac_addr[2] =
-+ cpu_to_le32(readl(port->gmac_base + GMAC_STA_ADD2));
-+}
-+
-+static int gemini_ethernet_port_probe(struct platform_device *pdev)
-+{
-+ char *port_names[2] = { "ethernet0", "ethernet1" };
-+ struct gemini_ethernet_port *port;
-+ struct device *dev = &pdev->dev;
-+ struct gemini_ethernet *geth;
-+ struct net_device *netdev;
-+ struct resource *gmacres;
-+ struct resource *dmares;
-+ struct device *parent;
-+ unsigned int id;
-+ int irq;
-+ int ret;
-+
-+ parent = dev->parent;
-+ geth = dev_get_drvdata(parent);
-+
-+ if (!strcmp(dev_name(dev), "60008000.ethernet-port"))
-+ id = 0;
-+ else if (!strcmp(dev_name(dev), "6000c000.ethernet-port"))
-+ id = 1;
-+ else
-+ return -ENODEV;
-+
-+ dev_info(dev, "probe %s ID %d\n", dev_name(dev), id);
-+
-+ netdev = alloc_etherdev_mq(sizeof(*port), TX_QUEUE_NUM);
-+ if (!netdev) {
-+ dev_err(dev, "Can't allocate ethernet device #%d\n", id);
-+ return -ENOMEM;
-+ }
-+
-+ port = netdev_priv(netdev);
-+ SET_NETDEV_DEV(netdev, dev);
-+ port->netdev = netdev;
-+ port->id = id;
-+ port->geth = geth;
-+ port->dev = dev;
-+
-+ /* DMA memory */
-+ dmares = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!dmares) {
-+ dev_err(dev, "no DMA resource\n");
-+ return -ENODEV;
-+ }
-+ port->dma_base = devm_ioremap_resource(dev, dmares);
-+ if (IS_ERR(port->dma_base))
-+ return PTR_ERR(port->dma_base);
-+
-+ /* GMAC config memory */
-+ gmacres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (!gmacres) {
-+ dev_err(dev, "no GMAC resource\n");
-+ return -ENODEV;
-+ }
-+ port->gmac_base = devm_ioremap_resource(dev, gmacres);
-+ if (IS_ERR(port->gmac_base))
-+ return PTR_ERR(port->gmac_base);
-+
-+ /* Interrupt */
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq <= 0) {
-+ dev_err(dev, "no IRQ\n");
-+ return irq ? irq : -ENODEV;
-+ }
-+ port->irq = irq;
-+
-+ /* Clock the port */
-+ port->pclk = devm_clk_get(dev, "PCLK");
-+ if (IS_ERR(port->pclk)) {
-+ dev_err(dev, "no PCLK\n");
-+ return PTR_ERR(port->pclk);
-+ }
-+ ret = clk_prepare_enable(port->pclk);
-+ if (ret)
-+ return ret;
-+
-+ /* Maybe there is a nice ethernet address we should use */
-+ gemini_port_save_mac_addr(port);
-+
-+ /* Reset the port */
-+ port->reset = devm_reset_control_get_exclusive(dev, NULL);
-+ if (IS_ERR(port->reset)) {
-+ dev_err(dev, "no reset\n");
-+ return PTR_ERR(port->reset);
-+ }
-+ reset_control_reset(port->reset);
-+ usleep_range(100, 500);
-+
-+ /* Assign pointer in the main state container */
-+ if (!id)
-+ geth->port0 = port;
-+ else
-+ geth->port1 = port;
-+ platform_set_drvdata(pdev, port);
-+
-+ /* Set up and register the netdev */
-+ netdev->dev_id = port->id;
-+ netdev->irq = irq;
-+ netdev->netdev_ops = &gmac_351x_ops;
-+ netdev->ethtool_ops = &gmac_351x_ethtool_ops;
-+
-+ spin_lock_init(&port->config_lock);
-+ gmac_clear_hw_stats(netdev);
-+
-+ netdev->hw_features = GMAC_OFFLOAD_FEATURES;
-+ netdev->features |= GMAC_OFFLOAD_FEATURES | NETIF_F_GRO;
-+
-+ port->freeq_refill = 0;
-+ netif_napi_add(netdev, &port->napi, gmac_napi_poll,
-+ DEFAULT_NAPI_WEIGHT);
-+
-+ if (is_valid_ether_addr((void *)port->mac_addr)) {
-+ memcpy(netdev->dev_addr, port->mac_addr, ETH_ALEN);
-+ } else {
-+ dev_dbg(dev, "ethernet address 0x%08x%08x%08x invalid\n",
-+ port->mac_addr[0], port->mac_addr[1],
-+ port->mac_addr[2]);
-+ dev_info(dev, "using a random ethernet address\n");
-+ random_ether_addr(netdev->dev_addr);
-+ }
-+ gmac_write_mac_address(netdev);
-+
-+ ret = devm_request_threaded_irq(port->dev,
-+ port->irq,
-+ gemini_port_irq,
-+ gemini_port_irq_thread,
-+ IRQF_SHARED,
-+ port_names[port->id],
-+ port);
-+ if (ret)
-+ return ret;
-+
-+ ret = register_netdev(netdev);
-+ if (!ret) {
-+ netdev_info(netdev,
-+ "irq %d, DMA @ 0x%pap, GMAC @ 0x%pap\n",
-+ port->irq, &dmares->start,
-+ &gmacres->start);
-+ ret = gmac_setup_phy(netdev);
-+ if (ret)
-+ netdev_info(netdev,
-+ "PHY init failed, deferring to ifup time\n");
-+ return 0;
-+ }
-+
-+ port->netdev = NULL;
-+ free_netdev(netdev);
-+ return ret;
-+}
-+
-+static int gemini_ethernet_port_remove(struct platform_device *pdev)
-+{
-+ struct gemini_ethernet_port *port = platform_get_drvdata(pdev);
-+
-+ gemini_port_remove(port);
-+ return 0;
-+}
-+
-+static const struct of_device_id gemini_ethernet_port_of_match[] = {
-+ {
-+ .compatible = "cortina,gemini-ethernet-port",
-+ },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, gemini_ethernet_port_of_match);
-+
-+static struct platform_driver gemini_ethernet_port_driver = {
-+ .driver = {
-+ .name = "gemini-ethernet-port",
-+ .of_match_table = of_match_ptr(gemini_ethernet_port_of_match),
-+ },
-+ .probe = gemini_ethernet_port_probe,
-+ .remove = gemini_ethernet_port_remove,
-+};
-+
-+static int gemini_ethernet_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct gemini_ethernet *geth;
-+ unsigned int retry = 5;
-+ struct resource *res;
-+ u32 val;
-+
-+ /* Global registers */
-+ geth = devm_kzalloc(dev, sizeof(*geth), GFP_KERNEL);
-+ if (!geth)
-+ return -ENOMEM;
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+ geth->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(geth->base))
-+ return PTR_ERR(geth->base);
-+ geth->dev = dev;
-+
-+ /* Wait for ports to stabilize */
-+ do {
-+ udelay(2);
-+ val = readl(geth->base + GLOBAL_TOE_VERSION_REG);
-+ barrier();
-+ } while (!val && --retry);
-+ if (!retry) {
-+ dev_err(dev, "failed to reset ethernet\n");
-+ return -EIO;
-+ }
-+ dev_info(dev, "Ethernet device ID: 0x%03x, revision 0x%01x\n",
-+ (val >> 4) & 0xFFFU, val & 0xFU);
-+
-+ spin_lock_init(&geth->irq_lock);
-+ spin_lock_init(&geth->freeq_lock);
-+ gemini_ethernet_init(geth);
-+
-+ /* The children will use this */
-+ platform_set_drvdata(pdev, geth);
-+
-+ /* Spawn child devices for the two ports */
-+ return devm_of_platform_populate(dev);
-+}
-+
-+static int gemini_ethernet_remove(struct platform_device *pdev)
-+{
-+ struct gemini_ethernet *geth = platform_get_drvdata(pdev);
-+
-+ gemini_ethernet_init(geth);
-+ geth_cleanup_freeq(geth);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id gemini_ethernet_of_match[] = {
-+ {
-+ .compatible = "cortina,gemini-ethernet",
-+ },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, gemini_ethernet_of_match);
-+
-+static struct platform_driver gemini_ethernet_driver = {
-+ .driver = {
-+ .name = DRV_NAME,
-+ .of_match_table = of_match_ptr(gemini_ethernet_of_match),
-+ },
-+ .probe = gemini_ethernet_probe,
-+ .remove = gemini_ethernet_remove,
-+};
-+
-+static int __init gemini_ethernet_module_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&gemini_ethernet_port_driver);
-+ if (ret)
-+ return ret;
-+
-+ ret = platform_driver_register(&gemini_ethernet_driver);
-+ if (ret) {
-+ platform_driver_unregister(&gemini_ethernet_port_driver);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+module_init(gemini_ethernet_module_init);
-+
-+static void __exit gemini_ethernet_module_exit(void)
-+{
-+ platform_driver_unregister(&gemini_ethernet_driver);
-+ platform_driver_unregister(&gemini_ethernet_port_driver);
-+}
-+module_exit(gemini_ethernet_module_exit);
-+
-+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
-+MODULE_DESCRIPTION("StorLink SL351x (Gemini) ethernet driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:" DRV_NAME);
---- /dev/null
-+++ b/drivers/net/ethernet/cortina/gemini.h
-@@ -0,0 +1,958 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Register definitions for Gemini GMAC Ethernet device driver
-+ *
-+ * Copyright (C) 2006 Storlink, Corp.
-+ * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
-+ * Copyright (C) 2010 Michał Mirosław <mirq-linux@rere.qmqm.pl>
-+ * Copytight (C) 2017 Linus Walleij <linus.walleij@linaro.org>
-+ */
-+#ifndef _GEMINI_ETHERNET_H
-+#define _GEMINI_ETHERNET_H
-+
-+#include <linux/bitops.h>
-+
-+/* Base Registers */
-+#define TOE_NONTOE_QUE_HDR_BASE 0x2000
-+#define TOE_TOE_QUE_HDR_BASE 0x3000
-+
-+/* Queue ID */
-+#define TOE_SW_FREE_QID 0x00
-+#define TOE_HW_FREE_QID 0x01
-+#define TOE_GMAC0_SW_TXQ0_QID 0x02
-+#define TOE_GMAC0_SW_TXQ1_QID 0x03
-+#define TOE_GMAC0_SW_TXQ2_QID 0x04
-+#define TOE_GMAC0_SW_TXQ3_QID 0x05
-+#define TOE_GMAC0_SW_TXQ4_QID 0x06
-+#define TOE_GMAC0_SW_TXQ5_QID 0x07
-+#define TOE_GMAC0_HW_TXQ0_QID 0x08
-+#define TOE_GMAC0_HW_TXQ1_QID 0x09
-+#define TOE_GMAC0_HW_TXQ2_QID 0x0A
-+#define TOE_GMAC0_HW_TXQ3_QID 0x0B
-+#define TOE_GMAC1_SW_TXQ0_QID 0x12
-+#define TOE_GMAC1_SW_TXQ1_QID 0x13
-+#define TOE_GMAC1_SW_TXQ2_QID 0x14
-+#define TOE_GMAC1_SW_TXQ3_QID 0x15
-+#define TOE_GMAC1_SW_TXQ4_QID 0x16
-+#define TOE_GMAC1_SW_TXQ5_QID 0x17
-+#define TOE_GMAC1_HW_TXQ0_QID 0x18
-+#define TOE_GMAC1_HW_TXQ1_QID 0x19
-+#define TOE_GMAC1_HW_TXQ2_QID 0x1A
-+#define TOE_GMAC1_HW_TXQ3_QID 0x1B
-+#define TOE_GMAC0_DEFAULT_QID 0x20
-+#define TOE_GMAC1_DEFAULT_QID 0x21
-+#define TOE_CLASSIFICATION_QID(x) (0x22 + x) /* 0x22 ~ 0x2F */
-+#define TOE_TOE_QID(x) (0x40 + x) /* 0x40 ~ 0x7F */
-+
-+/* TOE DMA Queue Size should be 2^n, n = 6...12
-+ * TOE DMA Queues are the following queue types:
-+ * SW Free Queue, HW Free Queue,
-+ * GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
-+ * The base address and descriptor number are configured at
-+ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
-+ */
-+#define GET_WPTR(addr) readw((addr) + 2)
-+#define GET_RPTR(addr) readw((addr))
-+#define SET_WPTR(addr, data) writew((data), (addr) + 2)
-+#define SET_RPTR(addr, data) writew((data), (addr))
-+#define __RWPTR_NEXT(x, mask) (((unsigned int)(x) + 1) & (mask))
-+#define __RWPTR_PREV(x, mask) (((unsigned int)(x) - 1) & (mask))
-+#define __RWPTR_DISTANCE(r, w, mask) (((unsigned int)(w) - (r)) & (mask))
-+#define __RWPTR_MASK(order) ((1 << (order)) - 1)
-+#define RWPTR_NEXT(x, order) __RWPTR_NEXT((x), __RWPTR_MASK((order)))
-+#define RWPTR_PREV(x, order) __RWPTR_PREV((x), __RWPTR_MASK((order)))
-+#define RWPTR_DISTANCE(r, w, order) __RWPTR_DISTANCE((r), (w), \
-+ __RWPTR_MASK((order)))
-+
-+/* Global registers */
-+#define GLOBAL_TOE_VERSION_REG 0x0000
-+#define GLOBAL_SW_FREEQ_BASE_SIZE_REG 0x0004
-+#define GLOBAL_HW_FREEQ_BASE_SIZE_REG 0x0008
-+#define GLOBAL_DMA_SKB_SIZE_REG 0x0010
-+#define GLOBAL_SWFQ_RWPTR_REG 0x0014
-+#define GLOBAL_HWFQ_RWPTR_REG 0x0018
-+#define GLOBAL_INTERRUPT_STATUS_0_REG 0x0020
-+#define GLOBAL_INTERRUPT_ENABLE_0_REG 0x0024
-+#define GLOBAL_INTERRUPT_SELECT_0_REG 0x0028
-+#define GLOBAL_INTERRUPT_STATUS_1_REG 0x0030
-+#define GLOBAL_INTERRUPT_ENABLE_1_REG 0x0034
-+#define GLOBAL_INTERRUPT_SELECT_1_REG 0x0038
-+#define GLOBAL_INTERRUPT_STATUS_2_REG 0x0040
-+#define GLOBAL_INTERRUPT_ENABLE_2_REG 0x0044
-+#define GLOBAL_INTERRUPT_SELECT_2_REG 0x0048
-+#define GLOBAL_INTERRUPT_STATUS_3_REG 0x0050
-+#define GLOBAL_INTERRUPT_ENABLE_3_REG 0x0054
-+#define GLOBAL_INTERRUPT_SELECT_3_REG 0x0058
-+#define GLOBAL_INTERRUPT_STATUS_4_REG 0x0060
-+#define GLOBAL_INTERRUPT_ENABLE_4_REG 0x0064
-+#define GLOBAL_INTERRUPT_SELECT_4_REG 0x0068
-+#define GLOBAL_HASH_TABLE_BASE_REG 0x006C
-+#define GLOBAL_QUEUE_THRESHOLD_REG 0x0070
-+
-+/* GMAC 0/1 DMA/TOE register */
-+#define GMAC_DMA_CTRL_REG 0x0000
-+#define GMAC_TX_WEIGHTING_CTRL_0_REG 0x0004
-+#define GMAC_TX_WEIGHTING_CTRL_1_REG 0x0008
-+#define GMAC_SW_TX_QUEUE0_PTR_REG 0x000C
-+#define GMAC_SW_TX_QUEUE1_PTR_REG 0x0010
-+#define GMAC_SW_TX_QUEUE2_PTR_REG 0x0014
-+#define GMAC_SW_TX_QUEUE3_PTR_REG 0x0018
-+#define GMAC_SW_TX_QUEUE4_PTR_REG 0x001C
-+#define GMAC_SW_TX_QUEUE5_PTR_REG 0x0020
-+#define GMAC_SW_TX_QUEUE_PTR_REG(i) (GMAC_SW_TX_QUEUE0_PTR_REG + 4 * (i))
-+#define GMAC_HW_TX_QUEUE0_PTR_REG 0x0024
-+#define GMAC_HW_TX_QUEUE1_PTR_REG 0x0028
-+#define GMAC_HW_TX_QUEUE2_PTR_REG 0x002C
-+#define GMAC_HW_TX_QUEUE3_PTR_REG 0x0030
-+#define GMAC_HW_TX_QUEUE_PTR_REG(i) (GMAC_HW_TX_QUEUE0_PTR_REG + 4 * (i))
-+#define GMAC_DMA_TX_FIRST_DESC_REG 0x0038
-+#define GMAC_DMA_TX_CURR_DESC_REG 0x003C
-+#define GMAC_DMA_TX_DESC_WORD0_REG 0x0040
-+#define GMAC_DMA_TX_DESC_WORD1_REG 0x0044
-+#define GMAC_DMA_TX_DESC_WORD2_REG 0x0048
-+#define GMAC_DMA_TX_DESC_WORD3_REG 0x004C
-+#define GMAC_SW_TX_QUEUE_BASE_REG 0x0050
-+#define GMAC_HW_TX_QUEUE_BASE_REG 0x0054
-+#define GMAC_DMA_RX_FIRST_DESC_REG 0x0058
-+#define GMAC_DMA_RX_CURR_DESC_REG 0x005C
-+#define GMAC_DMA_RX_DESC_WORD0_REG 0x0060
-+#define GMAC_DMA_RX_DESC_WORD1_REG 0x0064
-+#define GMAC_DMA_RX_DESC_WORD2_REG 0x0068
-+#define GMAC_DMA_RX_DESC_WORD3_REG 0x006C
-+#define GMAC_HASH_ENGINE_REG0 0x0070
-+#define GMAC_HASH_ENGINE_REG1 0x0074
-+/* matching rule 0 Control register 0 */
-+#define GMAC_MR0CR0 0x0078
-+#define GMAC_MR0CR1 0x007C
-+#define GMAC_MR0CR2 0x0080
-+#define GMAC_MR1CR0 0x0084
-+#define GMAC_MR1CR1 0x0088
-+#define GMAC_MR1CR2 0x008C
-+#define GMAC_MR2CR0 0x0090
-+#define GMAC_MR2CR1 0x0094
-+#define GMAC_MR2CR2 0x0098
-+#define GMAC_MR3CR0 0x009C
-+#define GMAC_MR3CR1 0x00A0
-+#define GMAC_MR3CR2 0x00A4
-+/* Support Protocol Register 0 */
-+#define GMAC_SPR0 0x00A8
-+#define GMAC_SPR1 0x00AC
-+#define GMAC_SPR2 0x00B0
-+#define GMAC_SPR3 0x00B4
-+#define GMAC_SPR4 0x00B8
-+#define GMAC_SPR5 0x00BC
-+#define GMAC_SPR6 0x00C0
-+#define GMAC_SPR7 0x00C4
-+/* GMAC Hash/Rx/Tx AHB Weighting register */
-+#define GMAC_AHB_WEIGHT_REG 0x00C8
-+
-+/* TOE GMAC 0/1 register */
-+#define GMAC_STA_ADD0 0x0000
-+#define GMAC_STA_ADD1 0x0004
-+#define GMAC_STA_ADD2 0x0008
-+#define GMAC_RX_FLTR 0x000c
-+#define GMAC_MCAST_FIL0 0x0010
-+#define GMAC_MCAST_FIL1 0x0014
-+#define GMAC_CONFIG0 0x0018
-+#define GMAC_CONFIG1 0x001c
-+#define GMAC_CONFIG2 0x0020
-+#define GMAC_CONFIG3 0x0024
-+#define GMAC_RESERVED 0x0028
-+#define GMAC_STATUS 0x002c
-+#define GMAC_IN_DISCARDS 0x0030
-+#define GMAC_IN_ERRORS 0x0034
-+#define GMAC_IN_MCAST 0x0038
-+#define GMAC_IN_BCAST 0x003c
-+#define GMAC_IN_MAC1 0x0040 /* for STA 1 MAC Address */
-+#define GMAC_IN_MAC2 0x0044 /* for STA 2 MAC Address */
-+
-+#define RX_STATS_NUM 6
-+
-+/* DMA Queues description Ring Base Address/Size Register (offset 0x0004) */
-+union dma_q_base_size {
-+ unsigned int bits32;
-+ unsigned int base_size;
-+};
-+
-+#define DMA_Q_BASE_MASK (~0x0f)
-+
-+/* DMA SKB Buffer register (offset 0x0008) */
-+union dma_skb_size {
-+ unsigned int bits32;
-+ struct bit_0008 {
-+ unsigned int sw_skb_size : 16; /* SW Free poll SKB Size */
-+ unsigned int hw_skb_size : 16; /* HW Free poll SKB Size */
-+ } bits;
-+};
-+
-+/* DMA SW Free Queue Read/Write Pointer Register (offset 0x000c) */
-+union dma_rwptr {
-+ unsigned int bits32;
-+ struct bit_000c {
-+ unsigned int rptr : 16; /* Read Ptr, RO */
-+ unsigned int wptr : 16; /* Write Ptr, RW */
-+ } bits;
-+};
-+
-+/* Interrupt Status Register 0 (offset 0x0020)
-+ * Interrupt Mask Register 0 (offset 0x0024)
-+ * Interrupt Select Register 0 (offset 0x0028)
-+ */
-+#define GMAC1_TXDERR_INT_BIT BIT(31)
-+#define GMAC1_TXPERR_INT_BIT BIT(30)
-+#define GMAC0_TXDERR_INT_BIT BIT(29)
-+#define GMAC0_TXPERR_INT_BIT BIT(28)
-+#define GMAC1_RXDERR_INT_BIT BIT(27)
-+#define GMAC1_RXPERR_INT_BIT BIT(26)
-+#define GMAC0_RXDERR_INT_BIT BIT(25)
-+#define GMAC0_RXPERR_INT_BIT BIT(24)
-+#define GMAC1_SWTQ15_FIN_INT_BIT BIT(23)
-+#define GMAC1_SWTQ14_FIN_INT_BIT BIT(22)
-+#define GMAC1_SWTQ13_FIN_INT_BIT BIT(21)
-+#define GMAC1_SWTQ12_FIN_INT_BIT BIT(20)
-+#define GMAC1_SWTQ11_FIN_INT_BIT BIT(19)
-+#define GMAC1_SWTQ10_FIN_INT_BIT BIT(18)
-+#define GMAC0_SWTQ05_FIN_INT_BIT BIT(17)
-+#define GMAC0_SWTQ04_FIN_INT_BIT BIT(16)
-+#define GMAC0_SWTQ03_FIN_INT_BIT BIT(15)
-+#define GMAC0_SWTQ02_FIN_INT_BIT BIT(14)
-+#define GMAC0_SWTQ01_FIN_INT_BIT BIT(13)
-+#define GMAC0_SWTQ00_FIN_INT_BIT BIT(12)
-+#define GMAC1_SWTQ15_EOF_INT_BIT BIT(11)
-+#define GMAC1_SWTQ14_EOF_INT_BIT BIT(10)
-+#define GMAC1_SWTQ13_EOF_INT_BIT BIT(9)
-+#define GMAC1_SWTQ12_EOF_INT_BIT BIT(8)
-+#define GMAC1_SWTQ11_EOF_INT_BIT BIT(7)
-+#define GMAC1_SWTQ10_EOF_INT_BIT BIT(6)
-+#define GMAC0_SWTQ05_EOF_INT_BIT BIT(5)
-+#define GMAC0_SWTQ04_EOF_INT_BIT BIT(4)
-+#define GMAC0_SWTQ03_EOF_INT_BIT BIT(3)
-+#define GMAC0_SWTQ02_EOF_INT_BIT BIT(2)
-+#define GMAC0_SWTQ01_EOF_INT_BIT BIT(1)
-+#define GMAC0_SWTQ00_EOF_INT_BIT BIT(0)
-+
-+/* Interrupt Status Register 1 (offset 0x0030)
-+ * Interrupt Mask Register 1 (offset 0x0034)
-+ * Interrupt Select Register 1 (offset 0x0038)
-+ */
-+#define TOE_IQ3_FULL_INT_BIT BIT(31)
-+#define TOE_IQ2_FULL_INT_BIT BIT(30)
-+#define TOE_IQ1_FULL_INT_BIT BIT(29)
-+#define TOE_IQ0_FULL_INT_BIT BIT(28)
-+#define TOE_IQ3_INT_BIT BIT(27)
-+#define TOE_IQ2_INT_BIT BIT(26)
-+#define TOE_IQ1_INT_BIT BIT(25)
-+#define TOE_IQ0_INT_BIT BIT(24)
-+#define GMAC1_HWTQ13_EOF_INT_BIT BIT(23)
-+#define GMAC1_HWTQ12_EOF_INT_BIT BIT(22)
-+#define GMAC1_HWTQ11_EOF_INT_BIT BIT(21)
-+#define GMAC1_HWTQ10_EOF_INT_BIT BIT(20)
-+#define GMAC0_HWTQ03_EOF_INT_BIT BIT(19)
-+#define GMAC0_HWTQ02_EOF_INT_BIT BIT(18)
-+#define GMAC0_HWTQ01_EOF_INT_BIT BIT(17)
-+#define GMAC0_HWTQ00_EOF_INT_BIT BIT(16)
-+#define CLASS_RX_INT_BIT(x) BIT((x + 2))
-+#define DEFAULT_Q1_INT_BIT BIT(1)
-+#define DEFAULT_Q0_INT_BIT BIT(0)
-+
-+#define TOE_IQ_INT_BITS (TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
-+ TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
-+#define TOE_IQ_FULL_BITS (TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
-+ TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
-+#define TOE_IQ_ALL_BITS (TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
-+#define TOE_CLASS_RX_INT_BITS 0xfffc
-+
-+/* Interrupt Status Register 2 (offset 0x0040)
-+ * Interrupt Mask Register 2 (offset 0x0044)
-+ * Interrupt Select Register 2 (offset 0x0048)
-+ */
-+#define TOE_QL_FULL_INT_BIT(x) BIT(x)
-+
-+/* Interrupt Status Register 3 (offset 0x0050)
-+ * Interrupt Mask Register 3 (offset 0x0054)
-+ * Interrupt Select Register 3 (offset 0x0058)
-+ */
-+#define TOE_QH_FULL_INT_BIT(x) BIT(x - 32)
-+
-+/* Interrupt Status Register 4 (offset 0x0060)
-+ * Interrupt Mask Register 4 (offset 0x0064)
-+ * Interrupt Select Register 4 (offset 0x0068)
-+ */
-+#define GMAC1_RESERVED_INT_BIT BIT(31)
-+#define GMAC1_MIB_INT_BIT BIT(30)
-+#define GMAC1_RX_PAUSE_ON_INT_BIT BIT(29)
-+#define GMAC1_TX_PAUSE_ON_INT_BIT BIT(28)
-+#define GMAC1_RX_PAUSE_OFF_INT_BIT BIT(27)
-+#define GMAC1_TX_PAUSE_OFF_INT_BIT BIT(26)
-+#define GMAC1_RX_OVERRUN_INT_BIT BIT(25)
-+#define GMAC1_STATUS_CHANGE_INT_BIT BIT(24)
-+#define GMAC0_RESERVED_INT_BIT BIT(23)
-+#define GMAC0_MIB_INT_BIT BIT(22)
-+#define GMAC0_RX_PAUSE_ON_INT_BIT BIT(21)
-+#define GMAC0_TX_PAUSE_ON_INT_BIT BIT(20)
-+#define GMAC0_RX_PAUSE_OFF_INT_BIT BIT(19)
-+#define GMAC0_TX_PAUSE_OFF_INT_BIT BIT(18)
-+#define GMAC0_RX_OVERRUN_INT_BIT BIT(17)
-+#define GMAC0_STATUS_CHANGE_INT_BIT BIT(16)
-+#define CLASS_RX_FULL_INT_BIT(x) BIT(x + 2)
-+#define HWFQ_EMPTY_INT_BIT BIT(1)
-+#define SWFQ_EMPTY_INT_BIT BIT(0)
-+
-+#define GMAC0_INT_BITS (GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
-+ GMAC0_RX_PAUSE_ON_INT_BIT | \
-+ GMAC0_TX_PAUSE_ON_INT_BIT | \
-+ GMAC0_RX_PAUSE_OFF_INT_BIT | \
-+ GMAC0_TX_PAUSE_OFF_INT_BIT | \
-+ GMAC0_RX_OVERRUN_INT_BIT | \
-+ GMAC0_STATUS_CHANGE_INT_BIT)
-+#define GMAC1_INT_BITS (GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
-+ GMAC1_RX_PAUSE_ON_INT_BIT | \
-+ GMAC1_TX_PAUSE_ON_INT_BIT | \
-+ GMAC1_RX_PAUSE_OFF_INT_BIT | \
-+ GMAC1_TX_PAUSE_OFF_INT_BIT | \
-+ GMAC1_RX_OVERRUN_INT_BIT | \
-+ GMAC1_STATUS_CHANGE_INT_BIT)
-+
-+#define CLASS_RX_FULL_INT_BITS 0xfffc
-+
-+/* GLOBAL_QUEUE_THRESHOLD_REG (offset 0x0070) */
-+union queue_threshold {
-+ unsigned int bits32;
-+ struct bit_0070_2 {
-+ /* 7:0 Software Free Queue Empty Threshold */
-+ unsigned int swfq_empty:8;
-+ /* 15:8 Hardware Free Queue Empty Threshold */
-+ unsigned int hwfq_empty:8;
-+ /* 23:16 */
-+ unsigned int intrq:8;
-+ /* 31:24 */
-+ unsigned int toe_class:8;
-+ } bits;
-+};
-+
-+/* GMAC DMA Control Register
-+ * GMAC0 offset 0x8000
-+ * GMAC1 offset 0xC000
-+ */
-+union gmac_dma_ctrl {
-+ unsigned int bits32;
-+ struct bit_8000 {
-+ /* bit 1:0 Peripheral Bus Width */
-+ unsigned int td_bus:2;
-+ /* bit 3:2 TxDMA max burst size for every AHB request */
-+ unsigned int td_burst_size:2;
-+ /* bit 7:4 TxDMA protection control */
-+ unsigned int td_prot:4;
-+ /* bit 9:8 Peripheral Bus Width */
-+ unsigned int rd_bus:2;
-+ /* bit 11:10 DMA max burst size for every AHB request */
-+ unsigned int rd_burst_size:2;
-+ /* bit 15:12 DMA Protection Control */
-+ unsigned int rd_prot:4;
-+ /* bit 17:16 */
-+ unsigned int rd_insert_bytes:2;
-+ /* bit 27:18 */
-+ unsigned int reserved:10;
-+ /* bit 28 1: Drop, 0: Accept */
-+ unsigned int drop_small_ack:1;
-+ /* bit 29 Loopback TxDMA to RxDMA */
-+ unsigned int loopback:1;
-+ /* bit 30 Tx DMA Enable */
-+ unsigned int td_enable:1;
-+ /* bit 31 Rx DMA Enable */
-+ unsigned int rd_enable:1;
-+ } bits;
-+};
-+
-+/* GMAC Tx Weighting Control Register 0
-+ * GMAC0 offset 0x8004
-+ * GMAC1 offset 0xC004
-+ */
-+union gmac_tx_wcr0 {
-+ unsigned int bits32;
-+ struct bit_8004 {
-+ /* bit 5:0 HW TX Queue 3 */
-+ unsigned int hw_tq0:6;
-+ /* bit 11:6 HW TX Queue 2 */
-+ unsigned int hw_tq1:6;
-+ /* bit 17:12 HW TX Queue 1 */
-+ unsigned int hw_tq2:6;
-+ /* bit 23:18 HW TX Queue 0 */
-+ unsigned int hw_tq3:6;
-+ /* bit 31:24 */
-+ unsigned int reserved:8;
-+ } bits;
-+};
-+
-+/* GMAC Tx Weighting Control Register 1
-+ * GMAC0 offset 0x8008
-+ * GMAC1 offset 0xC008
-+ */
-+union gmac_tx_wcr1 {
-+ unsigned int bits32;
-+ struct bit_8008 {
-+ /* bit 4:0 SW TX Queue 0 */
-+ unsigned int sw_tq0:5;
-+ /* bit 9:5 SW TX Queue 1 */
-+ unsigned int sw_tq1:5;
-+ /* bit 14:10 SW TX Queue 2 */
-+ unsigned int sw_tq2:5;
-+ /* bit 19:15 SW TX Queue 3 */
-+ unsigned int sw_tq3:5;
-+ /* bit 24:20 SW TX Queue 4 */
-+ unsigned int sw_tq4:5;
-+ /* bit 29:25 SW TX Queue 5 */
-+ unsigned int sw_tq5:5;
-+ /* bit 31:30 */
-+ unsigned int reserved:2;
-+ } bits;
-+};
-+
-+/* GMAC DMA Tx Description Word 0 Register
-+ * GMAC0 offset 0x8040
-+ * GMAC1 offset 0xC040
-+ */
-+union gmac_txdesc_0 {
-+ unsigned int bits32;
-+ struct bit_8040 {
-+ /* bit 15:0 Transfer size */
-+ unsigned int buffer_size:16;
-+ /* bit 21:16 number of descriptors used for the current frame */
-+ unsigned int desc_count:6;
-+ /* bit 22 Tx Status, 1: Successful 0: Failed */
-+ unsigned int status_tx_ok:1;
-+ /* bit 28:23 Tx Status, Reserved bits */
-+ unsigned int status_rvd:6;
-+ /* bit 29 protocol error during processing this descriptor */
-+ unsigned int perr:1;
-+ /* bit 30 data error during processing this descriptor */
-+ unsigned int derr:1;
-+ /* bit 31 */
-+ unsigned int reserved:1;
-+ } bits;
-+};
-+
-+/* GMAC DMA Tx Description Word 1 Register
-+ * GMAC0 offset 0x8044
-+ * GMAC1 offset 0xC044
-+ */
-+union gmac_txdesc_1 {
-+ unsigned int bits32;
-+ struct txdesc_word1 {
-+ /* bit 15: 0 Tx Frame Byte Count */
-+ unsigned int byte_count:16;
-+ /* bit 16 TSS segmentation use MTU setting */
-+ unsigned int mtu_enable:1;
-+ /* bit 17 IPV4 Header Checksum Enable */
-+ unsigned int ip_chksum:1;
-+ /* bit 18 IPV6 Tx Enable */
-+ unsigned int ipv6_enable:1;
-+ /* bit 19 TCP Checksum Enable */
-+ unsigned int tcp_chksum:1;
-+ /* bit 20 UDP Checksum Enable */
-+ unsigned int udp_chksum:1;
-+ /* bit 21 Bypass HW offload engine */
-+ unsigned int bypass_tss:1;
-+ /* bit 22 Don't update IP length field */
-+ unsigned int ip_fixed_len:1;
-+ /* bit 31:23 Tx Flag, Reserved */
-+ unsigned int reserved:9;
-+ } bits;
-+};
-+
-+#define TSS_IP_FIXED_LEN_BIT BIT(22)
-+#define TSS_BYPASS_BIT BIT(21)
-+#define TSS_UDP_CHKSUM_BIT BIT(20)
-+#define TSS_TCP_CHKSUM_BIT BIT(19)
-+#define TSS_IPV6_ENABLE_BIT BIT(18)
-+#define TSS_IP_CHKSUM_BIT BIT(17)
-+#define TSS_MTU_ENABLE_BIT BIT(16)
-+
-+#define TSS_CHECKUM_ENABLE \
-+ (TSS_IP_CHKSUM_BIT | TSS_IPV6_ENABLE_BIT | \
-+ TSS_TCP_CHKSUM_BIT | TSS_UDP_CHKSUM_BIT)
-+
-+/* GMAC DMA Tx Description Word 2 Register
-+ * GMAC0 offset 0x8048
-+ * GMAC1 offset 0xC048
-+ */
-+union gmac_txdesc_2 {
-+ unsigned int bits32;
-+ unsigned int buf_adr;
-+};
-+
-+/* GMAC DMA Tx Description Word 3 Register
-+ * GMAC0 offset 0x804C
-+ * GMAC1 offset 0xC04C
-+ */
-+union gmac_txdesc_3 {
-+ unsigned int bits32;
-+ struct txdesc_word3 {
-+ /* bit 12: 0 Tx Frame Byte Count */
-+ unsigned int mtu_size:13;
-+ /* bit 28:13 */
-+ unsigned int reserved:16;
-+ /* bit 29 End of frame interrupt enable */
-+ unsigned int eofie:1;
-+ /* bit 31:30 11: only one, 10: first, 01: last, 00: linking */
-+ unsigned int sof_eof:2;
-+ } bits;
-+};
-+
-+#define SOF_EOF_BIT_MASK 0x3fffffff
-+#define SOF_BIT 0x80000000
-+#define EOF_BIT 0x40000000
-+#define EOFIE_BIT BIT(29)
-+#define MTU_SIZE_BIT_MASK 0x1fff
-+
-+/* GMAC Tx Descriptor */
-+struct gmac_txdesc {
-+ union gmac_txdesc_0 word0;
-+ union gmac_txdesc_1 word1;
-+ union gmac_txdesc_2 word2;
-+ union gmac_txdesc_3 word3;
-+};
-+
-+/* GMAC DMA Rx Description Word 0 Register
-+ * GMAC0 offset 0x8060
-+ * GMAC1 offset 0xC060
-+ */
-+union gmac_rxdesc_0 {
-+ unsigned int bits32;
-+ struct bit_8060 {
-+ /* bit 15:0 number of descriptors used for the current frame */
-+ unsigned int buffer_size:16;
-+ /* bit 21:16 number of descriptors used for the current frame */
-+ unsigned int desc_count:6;
-+ /* bit 24:22 Status of rx frame */
-+ unsigned int status:4;
-+ /* bit 28:26 Check Sum Status */
-+ unsigned int chksum_status:3;
-+ /* bit 29 protocol error during processing this descriptor */
-+ unsigned int perr:1;
-+ /* bit 30 data error during processing this descriptor */
-+ unsigned int derr:1;
-+ /* bit 31 TOE/CIS Queue Full dropped packet to default queue */
-+ unsigned int drop:1;
-+ } bits;
-+};
-+
-+#define GMAC_RXDESC_0_T_derr BIT(30)
-+#define GMAC_RXDESC_0_T_perr BIT(29)
-+#define GMAC_RXDESC_0_T_chksum_status(x) BIT(x + 26)
-+#define GMAC_RXDESC_0_T_status(x) BIT(x + 22)
-+#define GMAC_RXDESC_0_T_desc_count(x) BIT(x + 16)
-+
-+#define RX_CHKSUM_IP_UDP_TCP_OK 0
-+#define RX_CHKSUM_IP_OK_ONLY 1
-+#define RX_CHKSUM_NONE 2
-+#define RX_CHKSUM_IP_ERR_UNKNOWN 4
-+#define RX_CHKSUM_IP_ERR 5
-+#define RX_CHKSUM_TCP_UDP_ERR 6
-+#define RX_CHKSUM_NUM 8
-+
-+#define RX_STATUS_GOOD_FRAME 0
-+#define RX_STATUS_TOO_LONG_GOOD_CRC 1
-+#define RX_STATUS_RUNT_FRAME 2
-+#define RX_STATUS_SFD_NOT_FOUND 3
-+#define RX_STATUS_CRC_ERROR 4
-+#define RX_STATUS_TOO_LONG_BAD_CRC 5
-+#define RX_STATUS_ALIGNMENT_ERROR 6
-+#define RX_STATUS_TOO_LONG_BAD_ALIGN 7
-+#define RX_STATUS_RX_ERR 8
-+#define RX_STATUS_DA_FILTERED 9
-+#define RX_STATUS_BUFFER_FULL 10
-+#define RX_STATUS_NUM 16
-+
-+#define RX_ERROR_LENGTH(s) \
-+ ((s) == RX_STATUS_TOO_LONG_GOOD_CRC || \
-+ (s) == RX_STATUS_TOO_LONG_BAD_CRC || \
-+ (s) == RX_STATUS_TOO_LONG_BAD_ALIGN)
-+#define RX_ERROR_OVER(s) \
-+ ((s) == RX_STATUS_BUFFER_FULL)
-+#define RX_ERROR_CRC(s) \
-+ ((s) == RX_STATUS_CRC_ERROR || \
-+ (s) == RX_STATUS_TOO_LONG_BAD_CRC)
-+#define RX_ERROR_FRAME(s) \
-+ ((s) == RX_STATUS_ALIGNMENT_ERROR || \
-+ (s) == RX_STATUS_TOO_LONG_BAD_ALIGN)
-+#define RX_ERROR_FIFO(s) \
-+ (0)
-+
-+/* GMAC DMA Rx Description Word 1 Register
-+ * GMAC0 offset 0x8064
-+ * GMAC1 offset 0xC064
-+ */
-+union gmac_rxdesc_1 {
-+ unsigned int bits32;
-+ struct rxdesc_word1 {
-+ /* bit 15: 0 Rx Frame Byte Count */
-+ unsigned int byte_count:16;
-+ /* bit 31:16 Software ID */
-+ unsigned int sw_id:16;
-+ } bits;
-+};
-+
-+/* GMAC DMA Rx Description Word 2 Register
-+ * GMAC0 offset 0x8068
-+ * GMAC1 offset 0xC068
-+ */
-+union gmac_rxdesc_2 {
-+ unsigned int bits32;
-+ unsigned int buf_adr;
-+};
-+
-+#define RX_INSERT_NONE 0
-+#define RX_INSERT_1_BYTE 1
-+#define RX_INSERT_2_BYTE 2
-+#define RX_INSERT_3_BYTE 3
-+
-+/* GMAC DMA Rx Description Word 3 Register
-+ * GMAC0 offset 0x806C
-+ * GMAC1 offset 0xC06C
-+ */
-+union gmac_rxdesc_3 {
-+ unsigned int bits32;
-+ struct rxdesc_word3 {
-+ /* bit 7: 0 L3 data offset */
-+ unsigned int l3_offset:8;
-+ /* bit 15: 8 L4 data offset */
-+ unsigned int l4_offset:8;
-+ /* bit 23: 16 L7 data offset */
-+ unsigned int l7_offset:8;
-+ /* bit 24 Duplicated ACK detected */
-+ unsigned int dup_ack:1;
-+ /* bit 25 abnormal case found */
-+ unsigned int abnormal:1;
-+ /* bit 26 IPV4 option or IPV6 extension header */
-+ unsigned int option:1;
-+ /* bit 27 Out of Sequence packet */
-+ unsigned int out_of_seq:1;
-+ /* bit 28 Control Flag is present */
-+ unsigned int ctrl_flag:1;
-+ /* bit 29 End of frame interrupt enable */
-+ unsigned int eofie:1;
-+ /* bit 31:30 11: only one, 10: first, 01: last, 00: linking */
-+ unsigned int sof_eof:2;
-+ } bits;
-+};
-+
-+/* GMAC Rx Descriptor, this is simply fitted over the queue registers */
-+struct gmac_rxdesc {
-+ union gmac_rxdesc_0 word0;
-+ union gmac_rxdesc_1 word1;
-+ union gmac_rxdesc_2 word2;
-+ union gmac_rxdesc_3 word3;
-+};
-+
-+/* GMAC Matching Rule Control Register 0
-+ * GMAC0 offset 0x8078
-+ * GMAC1 offset 0xC078
-+ */
-+#define MR_L2_BIT BIT(31)
-+#define MR_L3_BIT BIT(30)
-+#define MR_L4_BIT BIT(29)
-+#define MR_L7_BIT BIT(28)
-+#define MR_PORT_BIT BIT(27)
-+#define MR_PRIORITY_BIT BIT(26)
-+#define MR_DA_BIT BIT(23)
-+#define MR_SA_BIT BIT(22)
-+#define MR_ETHER_TYPE_BIT BIT(21)
-+#define MR_VLAN_BIT BIT(20)
-+#define MR_PPPOE_BIT BIT(19)
-+#define MR_IP_VER_BIT BIT(15)
-+#define MR_IP_HDR_LEN_BIT BIT(14)
-+#define MR_FLOW_LABLE_BIT BIT(13)
-+#define MR_TOS_TRAFFIC_BIT BIT(12)
-+#define MR_SPR_BIT(x) BIT(x)
-+#define MR_SPR_BITS 0xff
-+
-+/* GMAC_AHB_WEIGHT registers
-+ * GMAC0 offset 0x80C8
-+ * GMAC1 offset 0xC0C8
-+ */
-+union gmac_ahb_weight {
-+ unsigned int bits32;
-+ struct bit_80C8 {
-+ /* 4:0 */
-+ unsigned int hash_weight:5;
-+ /* 9:5 */
-+ unsigned int rx_weight:5;
-+ /* 14:10 */
-+ unsigned int tx_weight:5;
-+ /* 19:15 Rx Data Pre Request FIFO Threshold */
-+ unsigned int pre_req:5;
-+ /* 24:20 DMA TqCtrl to Start tqDV FIFO Threshold */
-+ unsigned int tq_dv_threshold:5;
-+ /* 31:25 */
-+ unsigned int reserved:7;
-+ } bits;
-+};
-+
-+/* GMAC RX FLTR
-+ * GMAC0 Offset 0xA00C
-+ * GMAC1 Offset 0xE00C
-+ */
-+union gmac_rx_fltr {
-+ unsigned int bits32;
-+ struct bit1_000c {
-+ /* Enable receive of unicast frames that are sent to STA
-+ * address
-+ */
-+ unsigned int unicast:1;
-+ /* Enable receive of multicast frames that pass multicast
-+ * filter
-+ */
-+ unsigned int multicast:1;
-+ /* Enable receive of broadcast frames */
-+ unsigned int broadcast:1;
-+ /* Enable receive of all frames */
-+ unsigned int promiscuous:1;
-+ /* Enable receive of all error frames */
-+ unsigned int error:1;
-+ unsigned int reserved:27;
-+ } bits;
-+};
-+
-+/* GMAC Configuration 0
-+ * GMAC0 Offset 0xA018
-+ * GMAC1 Offset 0xE018
-+ */
-+union gmac_config0 {
-+ unsigned int bits32;
-+ struct bit1_0018 {
-+ /* 0: disable transmit */
-+ unsigned int dis_tx:1;
-+ /* 1: disable receive */
-+ unsigned int dis_rx:1;
-+ /* 2: transmit data loopback enable */
-+ unsigned int loop_back:1;
-+ /* 3: flow control also trigged by Rx queues */
-+ unsigned int flow_ctrl:1;
-+ /* 4-7: adjust IFG from 96+/-56 */
-+ unsigned int adj_ifg:4;
-+ /* 8-10 maximum receive frame length allowed */
-+ unsigned int max_len:3;
-+ /* 11: disable back-off function */
-+ unsigned int dis_bkoff:1;
-+ /* 12: disable 16 collisions abort function */
-+ unsigned int dis_col:1;
-+ /* 13: speed up timers in simulation */
-+ unsigned int sim_test:1;
-+ /* 14: RX flow control enable */
-+ unsigned int rx_fc_en:1;
-+ /* 15: TX flow control enable */
-+ unsigned int tx_fc_en:1;
-+ /* 16: RGMII in-band status enable */
-+ unsigned int rgmii_en:1;
-+ /* 17: IPv4 RX Checksum enable */
-+ unsigned int ipv4_rx_chksum:1;
-+ /* 18: IPv6 RX Checksum enable */
-+ unsigned int ipv6_rx_chksum:1;
-+ /* 19: Remove Rx VLAN tag */
-+ unsigned int rx_tag_remove:1;
-+ /* 20 */
-+ unsigned int rgmm_edge:1;
-+ /* 21 */
-+ unsigned int rxc_inv:1;
-+ /* 22 */
-+ unsigned int ipv6_exthdr_order:1;
-+ /* 23 */
-+ unsigned int rx_err_detect:1;
-+ /* 24 */
-+ unsigned int port0_chk_hwq:1;
-+ /* 25 */
-+ unsigned int port1_chk_hwq:1;
-+ /* 26 */
-+ unsigned int port0_chk_toeq:1;
-+ /* 27 */
-+ unsigned int port1_chk_toeq:1;
-+ /* 28 */
-+ unsigned int port0_chk_classq:1;
-+ /* 29 */
-+ unsigned int port1_chk_classq:1;
-+ /* 30, 31 */
-+ unsigned int reserved:2;
-+ } bits;
-+};
-+
-+#define CONFIG0_TX_RX_DISABLE (BIT(1) | BIT(0))
-+#define CONFIG0_RX_CHKSUM (BIT(18) | BIT(17))
-+#define CONFIG0_FLOW_RX BIT(14)
-+#define CONFIG0_FLOW_TX BIT(15)
-+#define CONFIG0_FLOW_TX_RX (BIT(14) | BIT(15))
-+#define CONFIG0_FLOW_CTL (BIT(14) | BIT(15))
-+
-+#define CONFIG0_MAXLEN_SHIFT 8
-+#define CONFIG0_MAXLEN_MASK (7 << CONFIG0_MAXLEN_SHIFT)
-+#define CONFIG0_MAXLEN_1536 0
-+#define CONFIG0_MAXLEN_1518 1
-+#define CONFIG0_MAXLEN_1522 2
-+#define CONFIG0_MAXLEN_1542 3
-+#define CONFIG0_MAXLEN_9k 4 /* 9212 */
-+#define CONFIG0_MAXLEN_10k 5 /* 10236 */
-+#define CONFIG0_MAXLEN_1518__6 6
-+#define CONFIG0_MAXLEN_1518__7 7
-+
-+/* GMAC Configuration 1
-+ * GMAC0 Offset 0xA01C
-+ * GMAC1 Offset 0xE01C
-+ */
-+union gmac_config1 {
-+ unsigned int bits32;
-+ struct bit1_001c {
-+ /* Flow control set threshold */
-+ unsigned int set_threshold:8;
-+ /* Flow control release threshold */
-+ unsigned int rel_threshold:8;
-+ unsigned int reserved:16;
-+ } bits;
-+};
-+
-+#define GMAC_FLOWCTRL_SET_MAX 32
-+#define GMAC_FLOWCTRL_SET_MIN 0
-+#define GMAC_FLOWCTRL_RELEASE_MAX 32
-+#define GMAC_FLOWCTRL_RELEASE_MIN 0
-+
-+/* GMAC Configuration 2
-+ * GMAC0 Offset 0xA020
-+ * GMAC1 Offset 0xE020
-+ */
-+union gmac_config2 {
-+ unsigned int bits32;
-+ struct bit1_0020 {
-+ /* Flow control set threshold */
-+ unsigned int set_threshold:16;
-+ /* Flow control release threshold */
-+ unsigned int rel_threshold:16;
-+ } bits;
-+};
-+
-+/* GMAC Configuration 3
-+ * GMAC0 Offset 0xA024
-+ * GMAC1 Offset 0xE024
-+ */
-+union gmac_config3 {
-+ unsigned int bits32;
-+ struct bit1_0024 {
-+ /* Flow control set threshold */
-+ unsigned int set_threshold:16;
-+ /* Flow control release threshold */
-+ unsigned int rel_threshold:16;
-+ } bits;
-+};
-+
-+/* GMAC STATUS
-+ * GMAC0 Offset 0xA02C
-+ * GMAC1 Offset 0xE02C
-+ */
-+union gmac_status {
-+ unsigned int bits32;
-+ struct bit1_002c {
-+ /* Link status */
-+ unsigned int link:1;
-+ /* Link speed(00->2.5M 01->25M 10->125M) */
-+ unsigned int speed:2;
-+ /* Duplex mode */
-+ unsigned int duplex:1;
-+ unsigned int reserved_1:1;
-+ /* PHY interface type */
-+ unsigned int mii_rmii:2;
-+ unsigned int reserved_2:25;
-+ } bits;
-+};
-+
-+#define GMAC_SPEED_10 0
-+#define GMAC_SPEED_100 1
-+#define GMAC_SPEED_1000 2
-+
-+#define GMAC_PHY_MII 0
-+#define GMAC_PHY_GMII 1
-+#define GMAC_PHY_RGMII_100_10 2
-+#define GMAC_PHY_RGMII_1000 3
-+
-+/* Queue Header
-+ * (1) TOE Queue Header
-+ * (2) Non-TOE Queue Header
-+ * (3) Interrupt Queue Header
-+ *
-+ * memory Layout
-+ * TOE Queue Header
-+ * 0x60003000 +---------------------------+ 0x0000
-+ * | TOE Queue 0 Header |
-+ * | 8 * 4 Bytes |
-+ * +---------------------------+ 0x0020
-+ * | TOE Queue 1 Header |
-+ * | 8 * 4 Bytes |
-+ * +---------------------------+ 0x0040
-+ * | ...... |
-+ * | |
-+ * +---------------------------+
-+ *
-+ * Non TOE Queue Header
-+ * 0x60002000 +---------------------------+ 0x0000
-+ * | Default Queue 0 Header |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x0008
-+ * | Default Queue 1 Header |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x0010
-+ * | Classification Queue 0 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Classification Queue 1 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ (n * 8 + 0x10)
-+ * | ... |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ (13 * 8 + 0x10)
-+ * | Classification Queue 13 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x80
-+ * | Interrupt Queue 0 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 1 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 2 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 3 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ *
-+ */
-+#define TOE_QUEUE_HDR_ADDR(n) (TOE_TOE_QUE_HDR_BASE + n * 32)
-+#define TOE_Q_HDR_AREA_END (TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX + 1))
-+#define TOE_DEFAULT_Q_HDR_BASE(x) (TOE_NONTOE_QUE_HDR_BASE + 0x08 * (x))
-+#define TOE_CLASS_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x10)
-+#define TOE_INTR_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x80)
-+#define INTERRUPT_QUEUE_HDR_ADDR(n) (TOE_INTR_Q_HDR_BASE + n * 8)
-+#define NONTOE_Q_HDR_AREA_END (INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX + 1))
-+
-+/* NONTOE Queue Header Word 0 */
-+union nontoe_qhdr0 {
-+ unsigned int bits32;
-+ unsigned int base_size;
-+};
-+
-+#define NONTOE_QHDR0_BASE_MASK (~0x0f)
-+
-+/* NONTOE Queue Header Word 1 */
-+union nontoe_qhdr1 {
-+ unsigned int bits32;
-+ struct bit_nonqhdr1 {
-+ /* bit 15:0 */
-+ unsigned int rptr:16;
-+ /* bit 31:16 */
-+ unsigned int wptr:16;
-+ } bits;
-+};
-+
-+/* Non-TOE Queue Header */
-+struct nontoe_qhdr {
-+ union nontoe_qhdr0 word0;
-+ union nontoe_qhdr1 word1;
-+};
-+
-+#endif /* _GEMINI_ETHERNET_H */
diff --git a/target/linux/gemini/patches-4.14/0023-ARM-dts-Add-ethernet-to-the-Gemini-SoC.patch b/target/linux/gemini/patches-4.14/0023-ARM-dts-Add-ethernet-to-the-Gemini-SoC.patch
deleted file mode 100644
index 0960f6bfdd..0000000000
--- a/target/linux/gemini/patches-4.14/0023-ARM-dts-Add-ethernet-to-the-Gemini-SoC.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 860005c1a2f16aaa33458a7d80c9728b710ae292 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 6 Nov 2017 00:05:28 +0100
-Subject: [PATCH 23/31] ARM: dts: Add ethernet to the Gemini SoC
-
-This adds the Gemini ethernet node to the Gemini SoC.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 43 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -114,9 +114,16 @@
- };
- };
- gmii_default_pins: pinctrl-gmii {
-+ /*
-+ * Only activate GMAC0 by default since
-+ * GMAC1 will overlap with 8 GPIO lines
-+ * gpio2a, gpio2b. Overlay groups with
-+ * "gmii_gmac0_grp", "gmii_gmac1_grp" for
-+ * both ethernet interfaces.
-+ */
- mux {
- function = "gmii";
-- groups = "gmiigrp";
-+ groups = "gmii_gmac0_grp";
- };
- };
- pci_default_pins: pinctrl-pci {
-@@ -316,6 +323,41 @@
- };
- };
-
-+ ethernet@60000000 {
-+ compatible = "cortina,gemini-ethernet";
-+ reg = <0x60000000 0x4000>, /* Global registers, queue */
-+ <0x60004000 0x2000>, /* V-bit */
-+ <0x60006000 0x2000>; /* A-bit */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmii_default_pins>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ gmac0: ethernet-port@0 {
-+ compatible = "cortina,gemini-ethernet-port";
-+ reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-+ <0x6000a000 0x2000>; /* Port 0 GMAC */
-+ interrupt-parent = <&intcon>;
-+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_GMAC0>;
-+ clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-+ clock-names = "PCLK";
-+ };
-+
-+ gmac1: ethernet-port@1 {
-+ compatible = "cortina,gemini-ethernet-port";
-+ reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-+ <0x6000e000 0x2000>; /* Port 1 GMAC */
-+ interrupt-parent = <&intcon>;
-+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_GMAC1>;
-+ clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-+ clock-names = "PCLK";
-+ };
-+ };
-+
- ata@63000000 {
- compatible = "cortina,gemini-pata", "faraday,ftide010";
- reg = <0x63000000 0x1000>;
diff --git a/target/linux/gemini/patches-4.14/0024-net-gemini-Depend-on-HAS_IOMEM.patch b/target/linux/gemini/patches-4.14/0024-net-gemini-Depend-on-HAS_IOMEM.patch
deleted file mode 100644
index 2b95a9287f..0000000000
--- a/target/linux/gemini/patches-4.14/0024-net-gemini-Depend-on-HAS_IOMEM.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e0a7c7762e3a81e908bcca4176139ea9755d0985 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 21 Jan 2018 14:15:41 +0100
-Subject: [PATCH 24/31] net: gemini: Depend on HAS_IOMEM
-
-The zeroday builder notices that since Usermode Linux does not
-have IO memory, the build fails for them when selecting everything
-it can enable.
-
-As the driver is clearly using memory-mapped registers to access
-the network adapter, we add depends on HAS_IOMEM to solve this
-problem.
-
-Reported-by: kbuild test robot <fengguang.wu@intel.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/cortina/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/cortina/Kconfig
-+++ b/drivers/net/ethernet/cortina/Kconfig
-@@ -14,6 +14,7 @@ if NET_VENDOR_CORTINA
- config GEMINI_ETHERNET
- tristate "Gemini Gigabit Ethernet support"
- depends on OF
-+ depends on HAS_IOMEM
- select PHYLIB
- select CRC32
- ---help---
diff --git a/target/linux/gemini/patches-4.14/0025-ARM-dts-Set-D-Link-DNS-313-SATA-to-muxmode-0.patch b/target/linux/gemini/patches-4.14/0025-ARM-dts-Set-D-Link-DNS-313-SATA-to-muxmode-0.patch
deleted file mode 100644
index 06609a7ed6..0000000000
--- a/target/linux/gemini/patches-4.14/0025-ARM-dts-Set-D-Link-DNS-313-SATA-to-muxmode-0.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From f30cc6acdeb834be1a6ae54d47c84b2f8012b83d Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 18 Jan 2018 14:36:21 +0100
-Subject: [PATCH 25/31] ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
-
-This stops the driver from trying to probe the ATA slave
-interface. The vendor code enables the slave interface
-but the driver in the vendor tree does not make use of
-it.
-
-Setting it to muxmode 0 disables the slave interface:
-the hardware only has the master interface connected
-to the one harddrive slot anyways.
-
-Without this change booting takes excessive time, so it
-is very annoying to end users.
-
-Fixes: dd5c0561db75 ("ARM: dts: Add basic devicetree for D-Link DNS-313")
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ARM SoC folks: please apply this for fixes for v4.16.
----
- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -219,7 +219,7 @@
-
- sata: sata@46000000 {
- /* The ROM uses this muxmode */
-- cortina,gemini-ata-muxmode = <3>;
-+ cortina,gemini-ata-muxmode = <0>;
- cortina,gemini-enable-sata-bridge;
- status = "okay";
- };
diff --git a/target/linux/gemini/patches-4.14/0026-power-gemini-poweroff-Avoid-spurious-poweroff.patch b/target/linux/gemini/patches-4.14/0026-power-gemini-poweroff-Avoid-spurious-poweroff.patch
deleted file mode 100644
index e97aeaca43..0000000000
--- a/target/linux/gemini/patches-4.14/0026-power-gemini-poweroff-Avoid-spurious-poweroff.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From da443bc125265cae24a0e5f7d1c7bba196a9319f Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 22 Feb 2018 08:34:35 +0100
-Subject: [PATCH 26/31] power: gemini-poweroff: Avoid spurious poweroff
-
-On the D-Link DIR-685 we get spurious poweroff from
-infrared. Since that block (CIR) doesn't even have a
-driver this can be safely ignored, we can revisit this
-code once we have a device supporting CIR.
-
-On the D-Link DNS-313 we get spurious poweroff from
-the power button. This appears to be an initialization
-issue: we need to enable the block (start the state
-machine) before we clear any dangling IRQ.
-
-This patch fixes both issues.
-
-Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Fix both issues and rename the patch.
-- Proper commit message with specifics.
----
- drivers/power/reset/gemini-poweroff.c | 30 +++++++++++++++++-------------
- 1 file changed, 17 insertions(+), 13 deletions(-)
-
---- a/drivers/power/reset/gemini-poweroff.c
-+++ b/drivers/power/reset/gemini-poweroff.c
-@@ -47,8 +47,12 @@ static irqreturn_t gemini_powerbutton_in
- val &= 0x70U;
- switch (val) {
- case GEMINI_STAT_CIR:
-- dev_info(gpw->dev, "infrared poweroff\n");
-- orderly_poweroff(true);
-+ /*
-+ * We do not yet have a driver for the infrared
-+ * controller so it can cause spurious poweroff
-+ * events. Ignore those for now.
-+ */
-+ dev_info(gpw->dev, "infrared poweroff - ignored\n");
- break;
- case GEMINI_STAT_RTC:
- dev_info(gpw->dev, "RTC poweroff\n");
-@@ -116,7 +120,17 @@ static int gemini_poweroff_probe(struct
- return -ENODEV;
- }
-
-- /* Clear the power management IRQ */
-+ /*
-+ * Enable the power controller. This is crucial on Gemini
-+ * systems: if this is not done, pressing the power button
-+ * will result in unconditional poweroff without any warning.
-+ * This makes the kernel handle the poweroff.
-+ */
-+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
-+ val |= GEMINI_CTRL_ENABLE;
-+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
-+
-+ /* Now that the state machine is active, clear the IRQ */
- val = readl(gpw->base + GEMINI_PWC_CTRLREG);
- val |= GEMINI_CTRL_IRQ_CLR;
- writel(val, gpw->base + GEMINI_PWC_CTRLREG);
-@@ -129,16 +143,6 @@ static int gemini_poweroff_probe(struct
- pm_power_off = gemini_poweroff;
- gpw_poweroff = gpw;
-
-- /*
-- * Enable the power controller. This is crucial on Gemini
-- * systems: if this is not done, pressing the power button
-- * will result in unconditional poweroff without any warning.
-- * This makes the kernel handle the poweroff.
-- */
-- val = readl(gpw->base + GEMINI_PWC_CTRLREG);
-- val |= GEMINI_CTRL_ENABLE;
-- writel(val, gpw->base + GEMINI_PWC_CTRLREG);
--
- dev_info(dev, "Gemini poweroff driver registered\n");
-
- return 0;
diff --git a/target/linux/gemini/patches-4.14/0027-usb-host-add-DT-bindings-for-faraday-fotg2.patch b/target/linux/gemini/patches-4.14/0027-usb-host-add-DT-bindings-for-faraday-fotg2.patch
deleted file mode 100644
index e677c38438..0000000000
--- a/target/linux/gemini/patches-4.14/0027-usb-host-add-DT-bindings-for-faraday-fotg2.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 3699f119ff8da021fe7a1759e98e38ca88fa6766 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Wed, 8 Feb 2017 21:00:09 +0100
-Subject: [PATCH 27/31] usb: host: add DT bindings for faraday fotg2
-
-This adds device tree bindings for the Faraday FOTG2
-dual-mode host controller.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v3:
-- Change compatible to "faraday,fotg210" as the name of the
- hardware block.
-- Add an elaborate SoC-specific compatible string for the
- Cortina Systems Gemini so that SoC-specific features can
- be enabled.
-- Add cortina,gemini-mini-b to indicate a Gemini PHY with
- a Mini-B adapter connected.
-- Indicated that the Gemini version can handle "wakeup-source".
-- Add optional IP block clock.
----
- .../devicetree/bindings/usb/faraday,fotg210.txt | 35 ++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-@@ -0,0 +1,35 @@
-+Faraday FOTG Host controller
-+
-+This OTG-capable USB host controller is found in Cortina Systems
-+Gemini and other SoC products.
-+
-+Required properties:
-+- compatible: should be one of:
-+ "faraday,fotg210"
-+ "cortina,gemini-usb", "faraday,fotg210"
-+- reg: should contain one register range i.e. start and length
-+- interrupts: description of the interrupt line
-+
-+Optional properties:
-+- clocks: should contain the IP block clock
-+- clock-names: should be "PCLK" for the IP block clock
-+
-+Required properties for "cortina,gemini-usb" compatible:
-+- syscon: a phandle to the system controller to access PHY registers
-+
-+Optional properties for "cortina,gemini-usb" compatible:
-+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
-+ OTH connector is in use
-+- wakeup-source: see power/wakeup-source.txt
-+
-+Example for Gemini:
-+
-+usb@68000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x68000000 0x1000>;
-+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&cc 12>;
-+ clock-names = "PCLK";
-+ syscon = <&syscon>;
-+ wakeup-source;
-+};
diff --git a/target/linux/gemini/patches-4.14/0028-usb-host-fotg2-add-device-tree-probing.patch b/target/linux/gemini/patches-4.14/0028-usb-host-fotg2-add-device-tree-probing.patch
deleted file mode 100644
index 01a704830f..0000000000
--- a/target/linux/gemini/patches-4.14/0028-usb-host-fotg2-add-device-tree-probing.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 5662c553e89ac4179ec2a7a94a342ba3e5d78cf7 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Thu, 9 Feb 2017 15:20:49 +0100
-Subject: [PATCH 28/31] usb: host: fotg2: add device tree probing
-
-Add device tree probing to the fotg2 driver.
-
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v2->v3:
-- Change compatible to "faraday,fotg210" simply.
----
- drivers/usb/host/fotg210-hcd.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -23,6 +23,7 @@
- * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/device.h>
- #include <linux/dmapool.h>
- #include <linux/kernel.h>
-@@ -5604,6 +5605,15 @@ static int fotg210_hcd_probe(struct plat
- if (usb_disabled())
- return -ENODEV;
-
-+ /* Right now device-tree probed devices don't get dma_mask set.
-+ * Since shared usb code relies on it, set it here for now.
-+ * Once we have dma capability bindings this can go away.
-+ */
-+
-+ retval = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-+ if (retval)
-+ goto fail_create_hcd;
-+
- pdev->dev.power.power_state = PMSG_ON;
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-@@ -5680,9 +5690,18 @@ static int fotg210_hcd_remove(struct pla
- return 0;
- }
-
-+#ifdef CONFIG_OF
-+static const struct of_device_id fotg210_of_match[] = {
-+ { .compatible = "faraday,fotg210" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, fotg210_of_match);
-+#endif
-+
- static struct platform_driver fotg210_hcd_driver = {
- .driver = {
- .name = "fotg210-hcd",
-+ .of_match_table = of_match_ptr(fotg210_of_match),
- },
- .probe = fotg210_hcd_probe,
- .remove = fotg210_hcd_remove,
diff --git a/target/linux/gemini/patches-4.14/0029-usb-host-fotg2-add-silicon-clock-handling.patch b/target/linux/gemini/patches-4.14/0029-usb-host-fotg2-add-silicon-clock-handling.patch
deleted file mode 100644
index 5ecd9297e5..0000000000
--- a/target/linux/gemini/patches-4.14/0029-usb-host-fotg2-add-silicon-clock-handling.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From acd19633751f14607ccd76f9dfde5bde7935766c Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:46:12 +0200
-Subject: [PATCH 29/31] usb: host: fotg2: add silicon clock handling
-
-When used in a system with software-controller silicon clocks,
-the FOTG210 needs to grab, prepare and enable the clock.
-This is needed on for example the Cortina Gemini, where the
-platform will by default gate off the clock unless the
-peripheral (in this case the USB driver) grabs and enables
-the clock.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/fotg210-hcd.c | 26 ++++++++++++++++++++++----
- drivers/usb/host/fotg210.h | 3 +++
- 2 files changed, 25 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -45,6 +45,7 @@
- #include <linux/uaccess.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
-+#include <linux/clk.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5639,7 +5640,7 @@ static int fotg210_hcd_probe(struct plat
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- retval = PTR_ERR(hcd->regs);
-- goto failed;
-+ goto failed_put_hcd;
- }
-
- hcd->rsrc_start = res->start;
-@@ -5649,22 +5650,35 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210->caps = hcd->regs;
-
-+ /* It's OK not to supply this clock */
-+ fotg210->pclk = clk_get(dev, "PCLK");
-+ if (!IS_ERR(fotg210->pclk)) {
-+ retval = clk_prepare_enable(fotg210->pclk);
-+ if (retval) {
-+ dev_err(dev, "failed to enable PCLK\n");
-+ goto failed_dis_clk;
-+ }
-+ }
-+
- retval = fotg210_setup(hcd);
- if (retval)
-- goto failed;
-+ goto failed_dis_clk;
-
- fotg210_init(fotg210);
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
-- goto failed;
-+ goto failed_dis_clk;
- }
- device_wakeup_enable(hcd->self.controller);
-
- return retval;
-
--failed:
-+failed_dis_clk:
-+ if (!IS_ERR(fotg210->pclk))
-+ clk_disable_unprepare(fotg210->pclk);
-+failed_put_hcd:
- usb_put_hcd(hcd);
- fail_create_hcd:
- dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
-@@ -5680,6 +5694,10 @@ static int fotg210_hcd_remove(struct pla
- {
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-+ struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
-+
-+ if (!IS_ERR(fotg210->pclk))
-+ clk_disable_unprepare(fotg210->pclk);
-
- if (!hcd)
- return 0;
---- a/drivers/usb/host/fotg210.h
-+++ b/drivers/usb/host/fotg210.h
-@@ -182,6 +182,9 @@ struct fotg210_hcd { /* one per contro
- # define COUNT(x)
- #endif
-
-+ /* silicon clock */
-+ struct clk *pclk;
-+
- /* debug files */
- struct dentry *debug_dir;
- };
diff --git a/target/linux/gemini/patches-4.14/0030-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-4.14/0030-usb-host-fotg2-add-Gemini-specific-handling.patch
deleted file mode 100644
index 0125e816d6..0000000000
--- a/target/linux/gemini/patches-4.14/0030-usb-host-fotg2-add-Gemini-specific-handling.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From e8ede0f62b39a3d3b06ae3dc04a74680a1f0a64b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 30/31] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/Kconfig | 1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -375,6 +375,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- tristate "FOTG210 HCD support"
- depends on USB && HAS_DMA && HAS_IOMEM
-+ select MFD_SYSCON
- ---help---
- Faraday FOTG210 is an OTG controller which can be configured as
- an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -46,6 +46,10 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5587,6 +5591,72 @@ static void fotg210_init(struct fotg210_
- iowrite32(value, &fotg210->regs->otgcsr);
- }
-
-+/*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+ struct device_node *np = dev->of_node;
-+ struct regmap *map;
-+ bool mini_b;
-+ bool wakeup;
-+ u32 mask, val;
-+ int ret;
-+
-+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+ if (IS_ERR(map)) {
-+ dev_err(dev, "no syscon\n");
-+ return PTR_ERR(map);
-+ }
-+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+ wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+ /*
-+ * Figure out if this is USB0 or USB1 by simply checking the
-+ * physical base address.
-+ */
-+ mask = 0;
-+ if (hcd->rsrc_start == 0x69000000) {
-+ val = GEMINI_MISC_USB1_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB1_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB1_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB1_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB1_WAKEUP;
-+ } else {
-+ val = GEMINI_MISC_USB0_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB0_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB0_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB0_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB0_WAKEUP;
-+ }
-+
-+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+ if (ret) {
-+ dev_err(dev, "failed to initialize Gemini PHY\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "initialized Gemini PHY\n");
-+ return 0;
-+}
-+
- /**
- * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
- *
-@@ -5666,6 +5736,12 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210_init(fotg210);
-
-+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+ retval = fotg210_gemini_init(dev, hcd);
-+ if (retval)
-+ goto failed_dis_clk;
-+ }
-+
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch b/target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch
deleted file mode 100644
index 5b2c4139c1..0000000000
--- a/target/linux/gemini/patches-4.14/0031-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From dd62aee5d2d24199e71e745544e49a1a8b3c6f7a Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:50:22 +0200
-Subject: [PATCH 31/31] ARM: dts: Add the FOTG210 USB host to Gemini
-
-This adds the FOTG210 USB host controller to the Gemini
-device trees. In the main SoC DTSI it is flagged as disabled
-and then it is selectively enabled on the devices that utilize
-it (these per-platform enablements are done on the out-of-tree
-OpenWrt patch set). It is not enabled on the Itian SquareOne
-NAS/router since this instead has a VIA host controller
-soldered on the PCI port, and can gate off these USB host
-controllers.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-USB maintainers: I will merge this through the ARM SoC tree,
-the patch is only included in the series for context.
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 8 ++++++++
- arch/arm/boot/dts/gemini-nas4220b.dts | 8 ++++++++
- arch/arm/boot/dts/gemini-wbd111.dts | 20 ++++++++++++++++++++
- arch/arm/boot/dts/gemini-wbd222.dts | 21 +++++++++++++++++++++
- arch/arm/boot/dts/gemini.dtsi | 26 ++++++++++++++++++++++++++
- 6 files changed, 103 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -299,5 +299,13 @@
- };
- };
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -146,5 +146,13 @@
- ata@63000000 {
- status = "okay";
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-wbd111.dts
-+++ b/arch/arm/boot/dts/gemini-wbd111.dts
-@@ -160,5 +160,25 @@
- <0x6000 0 0 3 &pci_intc 1>,
- <0x6000 0 0 4 &pci_intc 2>;
- };
-+
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ /* Not used in this platform */
-+ };
-+ };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -165,5 +165,26 @@
- <0x6000 0 0 3 &pci_intc 1>,
- <0x6000 0 0 4 &pci_intc 2>;
- };
-+
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy1>;
-+ };
-+ };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -411,5 +411,31 @@
- #size-cells = <0>;
- status = "disabled";
- };
-+
-+ usb@68000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x68000000 0x1000>;
-+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_USB0>;
-+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
-+ clock-names = "PCLK";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb_default_pins>;
-+ syscon = <&syscon>;
-+ status = "disabled";
-+ };
-+
-+ usb@69000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x69000000 0x1000>;
-+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_USB1>;
-+ clocks = <&syscon GEMINI_CLK_GATE_USB1>;
-+ clock-names = "PCLK";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb_default_pins>;
-+ syscon = <&syscon>;
-+ status = "disabled";
-+ };
- };
- };
diff --git a/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch b/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch
deleted file mode 100644
index d8fd853b3b..0000000000
--- a/target/linux/gemini/patches-4.14/0033-ARM-dts-Fix-bootargs-for-Gemini-D-Link-devices.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 5813b729eb9fe91fcf895a5c2f30bf34fbd46379 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Wed, 2 May 2018 09:17:25 +0200
-Subject: [PATCH] ARM: dts: Fix bootargs for Gemini D-Link devices
-
-These machines need to be booted from very specific harddisk
-partitions (as the D-Link DNS-313 boots specifically from
-partition 4). Add the proper bootargs so that everything works
-smoothly.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 3 ++-
- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 1 +
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,8 @@
- };
-
- chosen {
-- stdout-path = "uart0:115200n8";
-+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ stdout-path = "uart0:19200n8";
- };
-
- gpio_keys {
---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -26,6 +26,7 @@
- };
-
- chosen {
-+ bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
- stdout-path = "uart0:19200n8";
- };
-
diff --git a/target/linux/gemini/patches-4.14/0034-ARM-dts-Add-ethernet-to-a-bunch-of-platforms.patch b/target/linux/gemini/patches-4.14/0034-ARM-dts-Add-ethernet-to-a-bunch-of-platforms.patch
deleted file mode 100644
index 3e588223b6..0000000000
--- a/target/linux/gemini/patches-4.14/0034-ARM-dts-Add-ethernet-to-a-bunch-of-platforms.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 6d5af7093aea4f18e040e73db2ad99aaa0c0f77e Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 19 Nov 2017 11:04:23 +0100
-Subject: [PATCH] ARM: dts: Add ethernet to a bunch of platforms
-
-These platforms have the PHY defined already so we just
-need to add a single device node to each of them to activate
-the ethernet device.
-
-The PHY skew/delay settings for pin control is known from a
-few vendor trees and old OpenWRT patch sets.
-
-This is a modified version of upstream commit
-95220046a62c00b5afb1aa7c1971989d427db977,
-just dropping the NAS4220B changes.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dns-313.dts | 62 ++++++++++++++++++++++++++++++
- arch/arm/boot/dts/gemini-wbd222.dts | 7 ++++
- 2 files changed, 69 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
-@@ -215,6 +215,56 @@
- groups = "gpio1dgrp";
- };
- };
-+ pinctrl-gmii {
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp";
-+ };
-+ /*
-+ * In the vendor Linux tree, these values are set for the C3
-+ * version of the SL3512 ASIC with the comment "benson suggest"
-+ */
-+ conf0 {
-+ pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
-+ skew-delay = <0>;
-+ };
-+ conf1 {
-+ pins = "T8 GMAC0 RXC";
-+ skew-delay = <10>;
-+ };
-+ conf2 {
-+ pins = "T11 GMAC1 RXC";
-+ skew-delay = <15>;
-+ };
-+ conf3 {
-+ pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
-+ skew-delay = <7>;
-+ };
-+ conf4 {
-+ pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
-+ skew-delay = <10>;
-+ };
-+ conf5 {
-+ /* The data lines all have default skew */
-+ pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
-+ "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
-+ "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
-+ "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
-+ "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
-+ "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
-+ skew-delay = <7>;
-+ };
-+ conf6 {
-+ pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
-+ "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
-+ skew-delay = <5>;
-+ };
-+ /* Set up drive strength on GMAC0 to 16 mA */
-+ conf7 {
-+ groups = "gmii_gmac0_grp";
-+ drive-strength = <16>;
-+ };
-+ };
- };
- };
-
-@@ -235,6 +285,18 @@
- pinctrl-0 = <&gpio1_default_pins>;
- };
-
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ /* Not used in this platform */
-+ };
-+ };
-+
- ata@63000000 {
- status = "okay";
- };
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -136,6 +136,13 @@
- "gpio0bgrp";
- };
- };
-+ pinctrl-gmii {
-+ /* This platform use both the ethernet ports */
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-+ };
-+ };
- };
- };
-
diff --git a/target/linux/gemini/patches-4.14/0900-arm-dts-gemini-add-openwrt-partitions-for-nas4220b.patch b/target/linux/gemini/patches-4.14/0900-arm-dts-gemini-add-openwrt-partitions-for-nas4220b.patch
deleted file mode 100644
index 0fae0af0e1..0000000000
--- a/target/linux/gemini/patches-4.14/0900-arm-dts-gemini-add-openwrt-partitions-for-nas4220b.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -115,6 +115,14 @@
- reg = <0x00fe0000 0x00020000>;
- read-only;
- };
-+ firmware@20000 {
-+ label = "firmware";
-+ reg = <0x00020000 0x00f00000>;
-+ };
-+ rootfs@320000 {
-+ label = "rootfs";
-+ reg = <0x00320000 0x00c00000>;
-+ };
- };
-
- syscon: syscon@40000000 {
diff --git a/target/linux/gemini/patches-4.14/0901-arm-dts-gemini-fix-ethernet-for-nas4220b.patch b/target/linux/gemini/patches-4.14/0901-arm-dts-gemini-fix-ethernet-for-nas4220b.patch
deleted file mode 100644
index 90e95a70c4..0000000000
--- a/target/linux/gemini/patches-4.14/0901-arm-dts-gemini-fix-ethernet-for-nas4220b.patch
+++ /dev/null
@@ -1,69 +0,0 @@
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -137,6 +137,47 @@
- groups = "gpio1dgrp";
- };
- };
-+ pinctrl-gmii {
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp";
-+ };
-+ conf0 {
-+ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
-+ skew-delay = <0>;
-+ };
-+ conf1 {
-+ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
-+ skew-delay = <15>;
-+ };
-+ conf2 {
-+ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
-+ skew-delay = <7>;
-+ };
-+ conf3 {
-+ pins = "U8 GMAC0 TXC";
-+ skew-delay = <11>;
-+ };
-+ conf4 {
-+ pins = "V11 GMAC1 TXC";
-+ skew-delay = <10>;
-+ };
-+ conf5 {
-+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-+ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-+ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-+ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-+ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-+ skew-delay = <7>;
-+ };
-+ conf6 {
-+ groups = "gmii_gmac0_grp";
-+ drive-strength = <16>;
-+ };
-+ };
- };
- };
-
-@@ -151,6 +192,18 @@
- pinctrl-0 = <&gpio1_default_pins>;
- };
-
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ gmac0: ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ gmac1: ethernet-port@1 {
-+ status = "disabled";
-+ };
-+ };
-+
- ata@63000000 {
- status = "okay";
- };
diff --git a/target/linux/gemini/patches-4.14/0902-arm-dts-gemini-add-second-ata-for-nas4220b.patch b/target/linux/gemini/patches-4.14/0902-arm-dts-gemini-add-second-ata-for-nas4220b.patch
deleted file mode 100644
index ef98172367..0000000000
--- a/target/linux/gemini/patches-4.14/0902-arm-dts-gemini-add-second-ata-for-nas4220b.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -208,6 +208,10 @@
- status = "okay";
- };
-
-+ ata@63400000 {
-+ status = "okay";
-+ };
-+
- usb@68000000 {
- status = "okay";
- };
diff --git a/target/linux/gemini/patches-4.14/0903-arm-dts-gemini-disable-usb-port-1-until-fixed.patch b/target/linux/gemini/patches-4.14/0903-arm-dts-gemini-disable-usb-port-1-until-fixed.patch
deleted file mode 100644
index 6962d563ad..0000000000
--- a/target/linux/gemini/patches-4.14/0903-arm-dts-gemini-disable-usb-port-1-until-fixed.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -217,7 +217,7 @@
- };
-
- usb@69000000 {
-- status = "okay";
-+ status = "disabled";
- };
- };
- };
diff --git a/target/linux/gemini/patches-4.14/0904-net-cortina-fix-uninitialized-struct-member-usage.patch b/target/linux/gemini/patches-4.14/0904-net-cortina-fix-uninitialized-struct-member-usage.patch
deleted file mode 100644
index 15a2d6cd89..0000000000
--- a/target/linux/gemini/patches-4.14/0904-net-cortina-fix-uninitialized-struct-member-usage.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/ethernet/cortina/gemini.c
-+++ b/drivers/net/ethernet/cortina/gemini.c
-@@ -1013,9 +1013,9 @@ static int geth_resize_freeq(struct gemi
- int ret;
-
- if (netdev->dev_id == 0)
-- other_netdev = geth->port1->netdev;
-+ other_netdev = (geth->port1)? geth->port1->netdev : NULL;
- else
-- other_netdev = geth->port0->netdev;
-+ other_netdev = (geth->port0)? geth->port0->netdev : NULL;
-
- if (other_netdev && netif_running(other_netdev))
- return -EBUSY;
-@@ -2510,6 +2510,8 @@ static int gemini_ethernet_probe(struct
- if (IS_ERR(geth->base))
- return PTR_ERR(geth->base);
- geth->dev = dev;
-+ geth->port0 = NULL;
-+ geth->port1 = NULL;
-
- /* Wait for ports to stabilize */
- do {
diff --git a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch b/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch
deleted file mode 100644
index 8cab32200f..0000000000
--- a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -87,6 +87,12 @@
- };
- };
-
-+ rtl8366rb {
-+ compatible = "realtek,rtl8366rb";
-+ gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+ gpio-sck = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+ };
-+
- leds {
- compatible = "gpio-leds";
- led-wps {
-@@ -245,6 +251,47 @@
- groups = "gpio1bgrp";
- };
- };
-+ pinctrl-gmii {
-+ mux {
-+ function = "gmii";
-+ groups = "gmii_gmac0_grp";
-+ };
-+ conf0 {
-+ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
-+ skew-delay = <0>;
-+ };
-+ conf1 {
-+ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
-+ skew-delay = <15>;
-+ };
-+ conf2 {
-+ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
-+ skew-delay = <7>;
-+ };
-+ conf3 {
-+ pins = "U8 GMAC0 TXC";
-+ skew-delay = <11>;
-+ };
-+ conf4 {
-+ pins = "V11 GMAC1 TXC";
-+ skew-delay = <10>;
-+ };
-+ conf5 {
-+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-+ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-+ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-+ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-+ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-+ skew-delay = <7>;
-+ };
-+ conf6 {
-+ groups = "gmii_gmac0_grp";
-+ drive-strength = <16>;
-+ };
-+ };
- };
- };
-
-@@ -286,6 +333,18 @@
- <0x6000 0 0 4 &pci_intc 2>;
- };
-
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ // phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ /* Not used in this platform */
-+ };
-+ };
-+
- ata@63000000 {
- status = "okay";
- };