layerscape: add ls2088ardb device support

The QorIQ LS2088A processor is built on the Layerscape
architecture combining eight ARM A72 processor cores
with advanced, high-performance datapath acceleration
and network, peripheral interfaces required for
networking, telecom, wireless infrastructure, aerospace
applications and general-purpose embedded applications.

Features summary:
- Eight 64-bit ARM v8 Cortex-A72 CPUs
- Two 64-bit DDR4 SDRAM memory controller with ECC
- One 32-bit DDR3 SDRAM memory controller with ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

13 files changed, 2094 insertions, 0 deletions

diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile
index c70955785b..341d5fbda0 100644
--- a/target/linux/layerscape/image/Makefile
+++ b/target/linux/layerscape/image/Makefile
@@ -106,4 +106,18 @@ endif
 endef
 TARGET_DEVICES += ls1088ardb
 
+define Device/ls2088ardb
+  DEVICE_TITLE := ls2088ardb-$(SUBTARGET)
+  DEVICE_PACKAGES += rcw-layerscape-ls2088ardb uboot-layerscape-$(SUBTARGET)-ls2088ardb mc-binary-ls2088ardb
+ifeq ($(SUBTARGET),64b)
+  DEVICE_DTS = freescale/fsl-ls2088a-rdb
+endif
+ifeq ($(SUBTARGET),32b)
+  DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls2088a-rdb
+endif
+  IMAGE/firmware.bin = append-ls-dtb $$(DEVICE_DTS) | pad-to 1M | append-kernel | pad-to 6M | \
+					append-rootfs | pad-rootfs | check-size 24117249
+endef
+TARGET_DEVICES += ls2088ardb
+
 $(eval $(call BuildImage))
diff --git a/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch b/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch
new file mode 100644
index 0000000000..d8f6c2b7df
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch
@@ -0,0 +1,29 @@
+From fbc31a61b7bcfbc9ae1a8acda547de891f4b8ee4 Mon Sep 17 00:00:00 2001
+From: Yangbo Lu <yangbo.lu@nxp.com>
+Date: Mon, 31 Oct 2016 17:50:03 +0800
+Subject: [PATCH 238/238] arm64: disable CONFIG_EEPROM_AT24 for
+ freescale.config
+
+Disable CONFIG_EEPROM_AT24 in freescale.config. Otherwise, i2cdump
+for EEPROM will get resource busy issue.
+
+Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
+---
+ arch/arm64/configs/freescale.config |    1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/arm64/configs/freescale.config b/arch/arm64/configs/freescale.config
+index a31951c..5447d7a 100644
+--- a/arch/arm64/configs/freescale.config
++++ b/arch/arm64/configs/freescale.config
+@@ -121,7 +121,6 @@ CONFIG_IMX2_WDT=y
+ CONFIG_HWMON=y
+ CONFIG_SENSORS_LM90=y
+ CONFIG_SENSORS_INA2XX=y
+-CONFIG_EEPROM_AT24=y
+ # lpuart
+ CONFIG_SERIAL_FSL_LPUART=y
+ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch b/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch
new file mode 100644
index 0000000000..8254490bb0
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch
@@ -0,0 +1,90 @@
+From 6b54054c4053215fe4add195c67daca9a466ba92 Mon Sep 17 00:00:00 2001
+From: "ying.zhang" <ying.zhang22455@nxp.com>
+Date: Fri, 23 Dec 2016 22:21:22 +0800
+Subject: [PATCH] mtd: extend physmap_of to let the device tree specify the
+ parition probe
+
+This is to support custom partitioning schemes for embedded PPC. To use
+define your own mtd_part_parser and then add something like:
+	linux,part-probe = "my_probe", "cmdlinepart";
+        To the board's dts file.
+
+If linux,part-probe is not specified then this behaves the same as before.
+
+Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
+Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+---
+ drivers/mtd/maps/physmap_of.c |   46 ++++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 45 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
+index fef1d1b..e46b4e9 100644
+--- a/drivers/mtd/maps/physmap_of.c
++++ b/drivers/mtd/maps/physmap_of.c
+@@ -112,9 +112,47 @@ static struct mtd_info *obsolete_probe(struct platform_device *dev,
+ static const char * const part_probe_types_def[] = {
+ 	"cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
+ 
++static const char * const *of_get_probes(struct device_node *dp)
++{
++	const char *cp;
++	int cplen;
++	unsigned int l;
++	unsigned int count;
++	const char **res;
++
++	cp = of_get_property(dp, "linux,part-probe", &cplen);
++	if (cp == NULL)
++		return part_probe_types_def;
++
++	count = 0;
++	for (l = 0; l != cplen; l++)
++		if (cp[l] == 0)
++			count++;
++
++	res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL);
++	if (!res)
++		return NULL;
++	count = 0;
++	while (cplen > 0) {
++		res[count] = cp;
++		l = strlen(cp) + 1;
++		cp += l;
++		cplen -= l;
++		count++;
++	}
++	return res;
++}
++
++static void of_free_probes(const char * const *probes)
++{
++	if (probes != part_probe_types_def)
++		kfree(probes);
++}
++
+ static const struct of_device_id of_flash_match[];
+ static int of_flash_probe(struct platform_device *dev)
+ {
++	const char * const *part_probe_types;
+ 	const struct of_device_id *match;
+ 	struct device_node *dp = dev->dev.of_node;
+ 	struct resource res;
+@@ -273,8 +311,14 @@ static int of_flash_probe(struct platform_device *dev)
+ 		goto err_out;
+ 
+ 	ppdata.of_node = dp;
+-	mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata,
++	part_probe_types = of_get_probes(dp);
++	if (!part_probe_types) {
++		err = -ENOMEM;
++		goto err_out;
++	}
++	mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+ 			NULL, 0);
++	of_free_probes(part_probe_types);
+ 
+ 	kfree(mtd_list);
+ 
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch b/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch
new file mode 100644
index 0000000000..91de6f4019
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch
@@ -0,0 +1,1352 @@
+From 45ba5bb2bdc9462fe5998aeb75e2c7e33b56c9fb Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Mon, 7 Nov 2016 10:23:52 +0800
+Subject: [PATCH 227/238] ls2088a/dts: add ls2088a dts
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile            |    2 +
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts |  241 ++++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts |  207 +++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi    |  854 +++++++++++++++++++++
+ 4 files changed, 1304 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+
+diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
+index b599645..e6c2a9f 100644
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -6,6 +6,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+  
+ always		:= $(dtb-y)
+ subdir-y	:= $(dts-dirs)
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+new file mode 100644
+index 0000000..04d3726
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+@@ -0,0 +1,241 @@
++/*
++ * Device Tree file for Freescale LS2080a QDS Board
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++	model = "Freescale Layerscape 2088a QDS Board";
++	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
++};
++
++&esdhc {
++	status = "okay";
++};
++
++&ifc {
++	status = "okay";
++	#address-cells = <2>;
++	#size-cells = <1>;
++	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++		  0x2 0x0 0x5 0x30000000 0x00010000
++		  0x3 0x0 0x5 0x20000000 0x00010000>;
++
++	nor@0,0 {
++	     #address-cells = <1>;
++	     #size-cells = <1>;
++	     compatible = "cfi-flash";
++	     reg = <0x0 0x0 0x8000000>;
++	     bank-width = <2>;
++	     device-width = <1>;
++	};
++
++	nand@2,0 {
++	     compatible = "fsl,ifc-nand";
++	     reg = <0x2 0x0 0x10000>;
++	};
++
++	cpld@3,0 {
++	     reg = <0x3 0x0 0x10000>;
++	     compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++			  "fsl,fpga-qixis";
++	};
++};
++
++&ftm0 {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++	pca9547@77 {
++		compatible = "nxp,pca9547";
++		reg = <0x77>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		i2c@0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x00>;
++			rtc@68 {
++				compatible = "dallas,ds3232";
++				reg = <0x68>;
++			};
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x02>;
++
++			ina220@40 {
++				compatible = "ti,ina220";
++				reg = <0x40>;
++				shunt-resistor = <500>;
++			};
++			ina220@41 {
++				compatible = "ti,ina220";
++				reg = <0x41>;
++				shunt-resistor = <1000>;
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x3>;
++
++			adt7481@4c {
++				compatible = "adi,adt7461";
++				reg = <0x4c>;
++			};
++		};
++	};
++};
++
++&i2c1 {
++	status = "disabled";
++};
++
++&i2c2 {
++	status = "disabled";
++};
++
++&i2c3 {
++	status = "disabled";
++};
++
++&dspi {
++	status = "okay";
++	dflash0: n25q128a {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <3000000>;
++		reg = <0>;
++	};
++	dflash1: sst25wf040b {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <3000000>;
++		reg = <1>;
++	};
++	dflash2: en25s64 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <3000000>;
++		reg = <2>;
++	};
++};
++
++&qspi {
++	status = "okay";
++	qflash0: s25fs256s1@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <20000000>;
++		m25p,fast-read;
++		reg = <0>;
++	};
++
++	qflash2: s25fs256s1@2 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <20000000>;
++		m25p,fast-read;
++		reg = <2>;
++	};
++};
++
++&sata0 {
++	status = "okay";
++};
++
++&sata1 {
++	status = "okay";
++};
++
++&usb0 {
++	status = "okay";
++};
++
++&usb1 {
++	status = "okay";
++};
++
++&ifc {
++	boardctrl: board-control@3,0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
++		reg = <3 0 0x300>;		/* TODO check address */
++		ranges = <0 3 0 0x300>;
++
++		mdio_mux_emi1 {
++			compatible = "mdio-mux-mmioreg", "mdio-mux";
++			mdio-parent-bus = <&emdio1>;
++			reg = <0x54 1>;		/* BRDCFG4 */
++			mux-mask = <0xe0>;	/* EMI1_MDIO */
++
++			#address-cells=<1>;
++			#size-cells = <0>;
++
++			/* Child MDIO buses, one for each riser card:
++			   reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
++
++			   VSC8234 PHYs on the riser cards.
++			 */
++
++			mdio_mux3: mdio@60 {
++				reg = <0x60>;
++				#address-cells = <1>;
++				#size-cells = <0>;
++
++				mdio0_phy12: mdio_phy0@1c {
++					reg = <0x1c>;
++					phy-connection-type = "sgmii";
++				};
++				mdio0_phy13: mdio_phy1@1d {
++					reg = <0x1d>;
++					phy-connection-type = "sgmii";
++				};
++				mdio0_phy14: mdio_phy2@1e {
++					reg = <0x1e>;
++					phy-connection-type = "sgmii";
++				};
++				mdio0_phy15: mdio_phy3@1f {
++					reg = <0x1f>;
++					phy-connection-type = "sgmii";
++				};
++			};
++		};
++	};
++};
++
++/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
++&dpmac9 {
++	phy-handle = <&mdio0_phy12>;
++};
++&dpmac10 {
++	phy-handle = <&mdio0_phy13>;
++};
++&dpmac11 {
++	phy-handle = <&mdio0_phy14>;
++};
++&dpmac12 {
++	phy-handle = <&mdio0_phy15>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+new file mode 100644
+index 0000000..ce553fb
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+@@ -0,0 +1,207 @@
++/*
++ * Device Tree file for Freescale LS2080a RDB board
++ *
++ * Copyright (C) 2015, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++	model = "Freescale Layerscape 2088a RDB Board";
++	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
++};
++
++&esdhc {
++	status = "okay";
++};
++
++&ifc {
++	status = "okay";
++	#address-cells = <2>;
++	#size-cells = <1>;
++	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++		  0x2 0x0 0x5 0x30000000 0x00010000
++		  0x3 0x0 0x5 0x20000000 0x00010000>;
++
++	nor@0,0 {
++	     #address-cells = <1>;
++	     #size-cells = <1>;
++	     compatible = "cfi-flash";
++	     reg = <0x0 0x0 0x8000000>;
++	     bank-width = <2>;
++	     device-width = <1>;
++	};
++
++	nand@2,0 {
++	     compatible = "fsl,ifc-nand";
++	     reg = <0x2 0x0 0x10000>;
++	};
++
++	cpld@3,0 {
++	     reg = <0x3 0x0 0x10000>;
++	     compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++			  "fsl,fpga-qixis";
++	};
++};
++
++&ftm0 {
++	status = "okay";
++};
++
++&i2c0 {
++	status = "okay";
++	pca9547@75 {
++		compatible = "nxp,pca9547";
++		reg = <0x75>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		i2c-mux-never-disable;
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x01>;
++			rtc@68 {
++				compatible = "dallas,ds3232";
++				reg = <0x68>;
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0x3>;
++
++			adt7481@4c {
++				compatible = "adi,adt7461";
++				reg = <0x4c>;
++			};
++		};
++	};
++};
++
++&i2c1 {
++	status = "disabled";
++};
++
++&i2c2 {
++	status = "disabled";
++};
++
++&i2c3 {
++	status = "disabled";
++};
++
++&dspi {
++	status = "okay";
++	dflash0: n25q512a {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "st,m25p80";
++		spi-max-frequency = <3000000>;
++		reg = <0>;
++	};
++};
++
++&qspi {
++	status = "disabled";
++};
++
++&sata0 {
++	status = "okay";
++};
++
++&sata1 {
++	status = "okay";
++};
++
++&usb0 {
++	status = "okay";
++};
++
++&usb1 {
++	status = "okay";
++};
++
++&emdio1 {
++	/* CS4340 PHYs */
++	mdio1_phy1: emdio1_phy@1 {
++		reg = <0x10>;
++		phy-connection-type = "xfi";
++	};
++	mdio1_phy2: emdio1_phy@2 {
++		reg = <0x11>;
++		phy-connection-type = "xfi";
++	};
++	mdio1_phy3: emdio1_phy@3 {
++		reg = <0x12>;
++		phy-connection-type = "xfi";
++	};
++	mdio1_phy4: emdio1_phy@4 {
++		reg = <0x13>;
++		phy-connection-type = "xfi";
++	};
++};
++
++&emdio2 {
++	/* AQR405 PHYs */
++	mdio2_phy1: emdio2_phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c45";
++		interrupts = <0 1 0x4>; /* Level high type */
++		reg = <0x0>;
++		phy-connection-type = "xfi";
++	};
++	mdio2_phy2: emdio2_phy@2 {
++		compatible = "ethernet-phy-ieee802.3-c45";
++		interrupts = <0 2 0x4>; /* Level high type */
++		reg = <0x1>;
++		phy-connection-type = "xfi";
++	};
++	mdio2_phy3: emdio2_phy@3 {
++		compatible = "ethernet-phy-ieee802.3-c45";
++		interrupts = <0 4 0x4>; /* Level high type */
++		reg = <0x2>;
++		phy-connection-type = "xfi";
++	};
++	mdio2_phy4: emdio2_phy@4 {
++		compatible = "ethernet-phy-ieee802.3-c45";
++		interrupts = <0 5 0x4>; /* Level high type */
++		reg = <0x3>;
++		phy-connection-type = "xfi";
++	};
++};
++
++/* Update DPMAC connections to external PHYs, under the assumption of
++ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
++ */
++&dpmac1 {
++	phy-handle = <&mdio1_phy1>;
++};
++&dpmac2 {
++	phy-handle = <&mdio1_phy2>;
++};
++&dpmac3 {
++	phy-handle = <&mdio1_phy3>;
++};
++&dpmac4 {
++	phy-handle = <&mdio1_phy4>;
++};
++&dpmac5 {
++	phy-handle = <&mdio2_phy1>;
++};
++&dpmac6 {
++	phy-handle = <&mdio2_phy2>;
++};
++&dpmac7 {
++	phy-handle = <&mdio2_phy3>;
++};
++&dpmac8 {
++	phy-handle = <&mdio2_phy4>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+new file mode 100644
+index 0000000..bd69942
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+@@ -0,0 +1,854 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPLv2 or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This library is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This library is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include <dt-bindings/thermal/thermal.h>
++
++/memreserve/ 0x80000000 0x00010000;
++
++/ {
++	compatible = "fsl,ls2088a";
++	interrupt-parent = <&gic>;
++	#address-cells = <2>;
++	#size-cells = <2>;
++
++	cpus {
++		#address-cells = <2>;
++		#size-cells = <0>;
++
++		cpu0: cpu@0 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x0>;
++			clocks = <&clockgen 1 0>;
++			#cooling-cells = <2>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu1: cpu@1 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x1>;
++			clocks = <&clockgen 1 0>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu2: cpu@100 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x100>;
++			clocks = <&clockgen 1 1>;
++			#cooling-cells = <2>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu3: cpu@101 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x101>;
++			clocks = <&clockgen 1 1>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu4: cpu@200 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x200>;
++			clocks = <&clockgen 1 2>;
++			#cooling-cells = <2>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu5: cpu@201 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x201>;
++			clocks = <&clockgen 1 2>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu6: cpu@300 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x300>;
++			clocks = <&clockgen 1 3>;
++			#cooling-cells = <2>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++
++		cpu7: cpu@301 {
++			device_type = "cpu";
++			compatible = "arm,cortex-a72";
++			reg = <0x0 0x301>;
++			clocks = <&clockgen 1 3>;
++			cpu-idle-states = <&CPU_PW20>;
++		};
++	};
++
++	pmu {
++		compatible = "arm,armv8-pmuv3";
++		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
++	};
++
++	idle-states {
++		entry-method = "arm,psci";
++
++		CPU_PW20: cpu-pw20 {
++			compatible = "arm,idle-state";
++			idle-state-name = "PW20";
++			arm,psci-suspend-param = <0x00010000>;
++			entry-latency-us = <2000>;
++			exit-latency-us = <2000>;
++			min-residency-us = <6000>;
++		};
++	};
++
++	gic: interrupt-controller@6000000 {
++		compatible = "arm,gic-v3";
++		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
++		      <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
++		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
++		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
++		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
++		#interrupt-cells = <3>;
++		#address-cells = <2>;
++		#size-cells = <2>;
++		ranges;
++		interrupt-controller;
++		interrupts = <1 9 0x4>;
++
++		its: gic-its@6020000 {
++			compatible = "arm,gic-v3-its";
++			msi-controller;
++			reg = <0x0 0x6020000 0 0x20000>;
++		};
++	};
++
++	sysclk: sysclk {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <100000000>;
++		clock-output-names = "sysclk";
++	};
++
++	clockgen: clocking@1300000 {
++		compatible = "fsl,ls2088a-clockgen";
++		reg = <0 0x1300000 0 0xa0000>;
++		#clock-cells = <2>;
++		clocks = <&sysclk>;
++	};
++
++	tmu: tmu@1f80000 {
++		compatible = "fsl,qoriq-tmu", "fsl,ls2080a-tmu", "fsl,ls2088a-tmu";
++		reg = <0x0 0x1f80000 0x0 0x10000>;
++		interrupts = <0 23 0x4>;
++		fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
++		fsl,tmu-calibration = <0x00000000 0x00000026
++				       0x00000001 0x0000002d
++				       0x00000002 0x00000032
++				       0x00000003 0x00000039
++				       0x00000004 0x0000003f
++				       0x00000005 0x00000046
++				       0x00000006 0x0000004d
++				       0x00000007 0x00000054
++				       0x00000008 0x0000005a
++				       0x00000009 0x00000061
++				       0x0000000a 0x0000006a
++				       0x0000000b 0x00000071
++
++				       0x00010000 0x00000025
++				       0x00010001 0x0000002c
++				       0x00010002 0x00000035
++				       0x00010003 0x0000003d
++				       0x00010004 0x00000045
++				       0x00010005 0x0000004e
++				       0x00010006 0x00000057
++				       0x00010007 0x00000061
++				       0x00010008 0x0000006b
++				       0x00010009 0x00000076
++
++				       0x00020000 0x00000029
++				       0x00020001 0x00000033
++				       0x00020002 0x0000003d
++				       0x00020003 0x00000049
++				       0x00020004 0x00000056
++				       0x00020005 0x00000061
++				       0x00020006 0x0000006d
++
++				       0x00030000 0x00000021
++				       0x00030001 0x0000002a
++				       0x00030002 0x0000003c
++				       0x00030003 0x0000004e>;
++		little-endian;
++		#thermal-sensor-cells = <1>;
++	};
++
++	thermal-zones {
++		cpu_thermal: cpu-thermal {
++			polling-delay-passive = <1000>;
++			polling-delay = <5000>;
++
++			thermal-sensors = <&tmu 4>;
++
++			trips {
++				cpu_alert: cpu-alert {
++					temperature = <75000>;
++					hysteresis = <2000>;
++					type = "passive";
++				};
++				cpu_crit: cpu-crit {
++					temperature = <85000>;
++					hysteresis = <2000>;
++					type = "critical";
++				};
++			};
++
++			cooling-maps {
++				map0 {
++					trip = <&cpu_alert>;
++					cooling-device =
++						<&cpu0 THERMAL_NO_LIMIT
++						THERMAL_NO_LIMIT>;
++				};
++				map1 {
++					trip = <&cpu_alert>;
++					cooling-device =
++						<&cpu2 THERMAL_NO_LIMIT
++						THERMAL_NO_LIMIT>;
++				};
++				map2 {
++					trip = <&cpu_alert>;
++					cooling-device =
++						<&cpu4 THERMAL_NO_LIMIT
++						THERMAL_NO_LIMIT>;
++				};
++				map3 {
++					trip = <&cpu_alert>;
++					cooling-device =
++						<&cpu6 THERMAL_NO_LIMIT
++						THERMAL_NO_LIMIT>;
++				};
++			};
++		};
++	};
++
++	serial0: serial@21c0500 {
++		device_type = "serial";
++		compatible = "fsl,ns16550", "ns16550a";
++		reg = <0x0 0x21c0500 0x0 0x100>;
++		clocks = <&clockgen 4 3>;
++		interrupts = <0 32 0x4>; /* Level high type */
++	};
++
++	serial1: serial@21c0600 {
++		device_type = "serial";
++		compatible = "fsl,ns16550", "ns16550a";
++		reg = <0x0 0x21c0600 0x0 0x100>;
++		clocks = <&clockgen 4 3>;
++		interrupts = <0 32 0x4>; /* Level high type */
++	};
++		cluster1_core0_watchdog: wdt@c000000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc000000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster1_core1_watchdog: wdt@c010000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc010000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster2_core0_watchdog: wdt@c100000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc100000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster2_core1_watchdog: wdt@c110000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc110000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster3_core0_watchdog: wdt@c200000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc200000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster3_core1_watchdog: wdt@c210000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc210000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster4_core0_watchdog: wdt@c300000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc300000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++		cluster4_core1_watchdog: wdt@c310000 {
++			compatible = "arm,sp805-wdt", "arm,primecell";
++			reg = <0x0 0xc310000 0x0 0x1000>;
++			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++			clock-names = "apb_pclk", "wdog_clk";
++		};
++
++	gpio0: gpio@2300000 {
++		compatible = "fsl,qoriq-gpio";
++		reg = <0x0 0x2300000 0x0 0x10000>;
++		interrupts = <0 36 0x4>; /* Level high type */
++		gpio-controller;
++		little-endian;
++		#gpio-cells = <2>;
++		interrupt-controller;
++		#interrupt-cells = <2>;
++	};
++
++	gpio1: gpio@2310000 {
++		compatible = "fsl,qoriq-gpio";
++		reg = <0x0 0x2310000 0x0 0x10000>;
++		interrupts = <0 36 0x4>; /* Level high type */
++		gpio-controller;
++		little-endian;
++		#gpio-cells = <2>;
++		interrupt-controller;
++		#interrupt-cells = <2>;
++	};
++
++	gpio2: gpio@2320000 {
++		compatible = "fsl,qoriq-gpio";
++		reg = <0x0 0x2320000 0x0 0x10000>;
++		interrupts = <0 37 0x4>; /* Level high type */
++		gpio-controller;
++		little-endian;
++		#gpio-cells = <2>;
++		interrupt-controller;
++		#interrupt-cells = <2>;
++	};
++
++	gpio3: gpio@2330000 {
++		compatible = "fsl,qoriq-gpio";
++		reg = <0x0 0x2330000 0x0 0x10000>;
++		interrupts = <0 37 0x4>; /* Level high type */
++		gpio-controller;
++		little-endian;
++		#gpio-cells = <2>;
++		interrupt-controller;
++		#interrupt-cells = <2>;
++	};
++
++	/* TODO: WRIOP (CCSR?) */
++	emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
++		compatible = "fsl,fman-memac-mdio";
++		reg = <0x0 0x8B96000 0x0 0x1000>;
++		device_type = "mdio";			/* TODO: is this necessary? */
++		little-endian;	/* force the driver in LE mode */
++
++		/* Not necessary on the QDS, but needed on the RDB */
++		#address-cells = <1>;
++		#size-cells = <0>;
++	};
++
++	emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
++		compatible = "fsl,fman-memac-mdio";
++		reg = <0x0 0x8B97000 0x0 0x1000>;
++		device_type = "mdio";			/* TODO: is this necessary? */
++		little-endian;	/* force the driver in LE mode */
++
++		#address-cells = <1>;
++		#size-cells = <0>;
++	};
++
++	ifc: ifc@2240000 {
++		compatible = "fsl,ifc", "simple-bus";
++		reg = <0x0 0x2240000 0x0 0x20000>;
++		interrupts = <0 21 0x4>; /* Level high type */
++		little-endian;
++		#address-cells = <2>;
++		#size-cells = <1>;
++
++		ranges = <0 0 0x5 0x80000000 0x08000000
++			  2 0 0x5 0x30000000 0x00010000
++			  3 0 0x5 0x20000000 0x00010000>;
++	};
++
++	esdhc: esdhc@2140000 {
++		compatible = "fsl,ls2088a-esdhc", "fsl,ls2080a-esdhc",
++			     "fsl,esdhc";
++		reg = <0x0 0x2140000 0x0 0x10000>;
++		interrupts = <0 28 0x4>; /* Level high type */
++		clock-frequency = <0>;
++		voltage-ranges = <1800 1800 3300 3300>;
++		sdhci,auto-cmd12;
++		little-endian;
++		bus-width = <4>;
++	};
++
++	ftm0: ftm0@2800000 {
++		compatible = "fsl,ftm-alarm";
++		reg = <0x0 0x2800000 0x0 0x10000>;
++		interrupts = <0 44 4>;
++	};
++
++	reset: reset@1E60000 {
++		compatible = "fsl,ls-reset";
++		reg = <0x0 0x1E60000 0x0 0x10000>;
++	};
++
++	dspi: dspi@2100000 {
++		compatible = "fsl,ls2088a-dspi", "fsl,ls2085a-dspi",
++			     "fsl,ls2080a-dspi";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x2100000 0x0 0x10000>;
++		interrupts = <0 26 0x4>; /* Level high type */
++		clocks = <&clockgen 4 3>;
++		clock-names = "dspi";
++		spi-num-chipselects = <5>;
++		bus-num = <0>;
++	};
++
++	i2c0: i2c@2000000 {
++		compatible = "fsl,vf610-i2c";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x2000000 0x0 0x10000>;
++		interrupts = <0 34 0x4>; /* Level high type */
++		clock-names = "i2c";
++		clocks = <&clockgen 4 3>;
++	};
++
++	i2c1: i2c@2010000 {
++		compatible = "fsl,vf610-i2c";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x2010000 0x0 0x10000>;
++		interrupts = <0 34 0x4>; /* Level high type */
++		clock-names = "i2c";
++		clocks = <&clockgen 4 3>;
++	};
++
++	i2c2: i2c@2020000 {
++		compatible = "fsl,vf610-i2c";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x2020000 0x0 0x10000>;
++		interrupts = <0 35 0x4>; /* Level high type */
++		clock-names = "i2c";
++		clocks = <&clockgen 4 3>;
++	};
++
++	i2c3: i2c@2030000 {
++		compatible = "fsl,vf610-i2c";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x2030000 0x0 0x10000>;
++		interrupts = <0 35 0x4>; /* Level high type */
++		clock-names = "i2c";
++		clocks = <&clockgen 4 3>;
++	};
++
++	qspi: quadspi@20c0000 {
++		compatible = "fsl,ls2088a-qspi", "fsl,ls2080a-qspi";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x0 0x20c0000 0x0 0x10000>,
++		      <0x0 0x20000000 0x0 0x10000000>;
++		reg-names = "QuadSPI", "QuadSPI-memory";
++		interrupts = <0 25 0x4>; /* Level high type */
++		clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++		clock-names = "qspi_en", "qspi";
++	};
++
++	pcie1: pcie@3400000 {
++		compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
++		       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
++		reg-names = "regs", "config";
++		interrupts = <0 108 0x4>; /* Level high type */
++		interrupt-names = "aer";
++		#address-cells = <3>;
++		#size-cells = <2>;
++		device_type = "pci";
++		dma-coherent;
++		fsl,lut_diff;
++		num-lanes = <4>;
++		bus-range = <0x0 0xff>;
++		ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
++			  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++		msi-parent = <&its>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0 0 0 7>;
++		interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
++				<0000 0 0 2 &gic 0 0 0 110 4>,
++				<0000 0 0 3 &gic 0 0 0 111 4>,
++				<0000 0 0 4 &gic 0 0 0 112 4>;
++	};
++
++	pcie2: pcie@3500000 {
++		compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
++		       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
++		reg-names = "regs", "config";
++		interrupts = <0 113 0x4>; /* Level high type */
++		interrupt-names = "aer";
++		#address-cells = <3>;
++		#size-cells = <2>;
++		device_type = "pci";
++		dma-coherent;
++		fsl,lut_diff;
++		num-lanes = <4>;
++		bus-range = <0x0 0xff>;
++		ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
++			  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++		msi-parent = <&its>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0 0 0 7>;
++		interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
++				<0000 0 0 2 &gic 0 0 0 115 4>,
++				<0000 0 0 3 &gic 0 0 0 116 4>,
++				<0000 0 0 4 &gic 0 0 0 117 4>;
++	};
++
++	pcie3: pcie@3600000 {
++		compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
++		       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
++		reg-names = "regs", "config";
++		interrupts = <0 118 0x4>; /* Level high type */
++		interrupt-names = "aer";
++		#address-cells = <3>;
++		#size-cells = <2>;
++		device_type = "pci";
++		dma-coherent;
++		fsl,lut_diff;
++		num-lanes = <8>;
++		bus-range = <0x0 0xff>;
++		ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
++			  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++		msi-parent = <&its>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0 0 0 7>;
++		interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
++				<0000 0 0 2 &gic 0 0 0 120 4>,
++				<0000 0 0 3 &gic 0 0 0 121 4>,
++				<0000 0 0 4 &gic 0 0 0 122 4>;
++	};
++
++	pcie4: pcie@3700000 {
++		compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
++		       0x38 0x00000000 0x0 0x00002000>; /* configuration space */
++		reg-names = "regs", "config";
++		interrupts = <0 123 0x4>; /* Level high type */
++		interrupt-names = "aer";
++		#address-cells = <3>;
++		#size-cells = <2>;
++		device_type = "pci";
++		dma-coherent;
++		fsl,lut_diff;
++		num-lanes = <4>;
++		bus-range = <0x0 0xff>;
++		ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000   /* downstream I/O */
++			  0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++		msi-parent = <&its>;
++		#interrupt-cells = <1>;
++		interrupt-map-mask = <0 0 0 7>;
++		interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
++				<0000 0 0 2 &gic 0 0 0 125 4>,
++				<0000 0 0 3 &gic 0 0 0 126 4>,
++				<0000 0 0 4 &gic 0 0 0 127 4>;
++	};
++
++	sata0: sata@3200000 {
++		status = "disabled";
++		compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++		reg = <0x0 0x3200000 0x0 0x10000>;
++		interrupts = <0 133 0x4>; /* Level high type */
++		clocks = <&clockgen 4 3>;
++	};
++
++	sata1: sata@3210000 {
++		status = "disabled";
++		compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++		reg = <0x0 0x3210000 0x0 0x10000>;
++		interrupts = <0 136 0x4>; /* Level high type */
++		clocks = <&clockgen 4 3>;
++	};
++
++	usb0: usb3@3100000 {
++		status = "disabled";
++		compatible = "snps,dwc3";
++		reg = <0x0 0x3100000 0x0 0x10000>;
++		interrupts = <0 80 0x4>; /* Level high type */
++		dr_mode = "host";
++		configure-gfladj;
++		snps,dis_rxdet_inp3_quirk;
++	};
++
++	usb1: usb3@3110000 {
++		status = "disabled";
++		compatible = "snps,dwc3";
++		reg = <0x0 0x3110000 0x0 0x10000>;
++		interrupts = <0 81 0x4>; /* Level high type */
++		dr_mode = "host";
++		configure-gfladj;
++		snps,dis_rxdet_inp3_quirk;
++	};
++
++	smmu: iommu@5000000 {
++		compatible = "arm,mmu-500";
++		reg = <0 0x5000000 0 0x800000>;
++		#global-interrupts = <12>;
++		interrupts = <0 13 4>, /* global secure fault */
++			     <0 14 4>, /* combined secure interrupt */
++			     <0 15 4>, /* global non-secure fault */
++			     <0 16 4>, /* combined non-secure interrupt */
++			/* performance counter interrupts 0-7 */
++			     <0 211 4>,
++			     <0 212 4>,
++			     <0 213 4>,
++			     <0 214 4>,
++			     <0 215 4>,
++			     <0 216 4>,
++			     <0 217 4>,
++			     <0 218 4>,
++			/* per context interrupt, 64 interrupts */
++			     <0 146 4>,
++			     <0 147 4>,
++			     <0 148 4>,
++			     <0 149 4>,
++			     <0 150 4>,
++			     <0 151 4>,
++			     <0 152 4>,
++			     <0 153 4>,
++			     <0 154 4>,
++			     <0 155 4>,
++			     <0 156 4>,
++			     <0 157 4>,
++			     <0 158 4>,
++			     <0 159 4>,
++			     <0 160 4>,
++			     <0 161 4>,
++			     <0 162 4>,
++			     <0 163 4>,
++			     <0 164 4>,
++			     <0 165 4>,
++			     <0 166 4>,
++			     <0 167 4>,
++			     <0 168 4>,
++			     <0 169 4>,
++			     <0 170 4>,
++			     <0 171 4>,
++			     <0 172 4>,
++			     <0 173 4>,
++			     <0 174 4>,
++			     <0 175 4>,
++			     <0 176 4>,
++			     <0 177 4>,
++			     <0 178 4>,
++			     <0 179 4>,
++			     <0 180 4>,
++			     <0 181 4>,
++			     <0 182 4>,
++			     <0 183 4>,
++			     <0 184 4>,
++			     <0 185 4>,
++			     <0 186 4>,
++			     <0 187 4>,
++			     <0 188 4>,
++			     <0 189 4>,
++			     <0 190 4>,
++			     <0 191 4>,
++			     <0 192 4>,
++			     <0 193 4>,
++			     <0 194 4>,
++			     <0 195 4>,
++			     <0 196 4>,
++			     <0 197 4>,
++			     <0 198 4>,
++			     <0 199 4>,
++			     <0 200 4>,
++			     <0 201 4>,
++			     <0 202 4>,
++			     <0 203 4>,
++			     <0 204 4>,
++			     <0 205 4>,
++			     <0 206 4>,
++			     <0 207 4>,
++			     <0 208 4>,
++			     <0 209 4>;
++		mmu-masters = <&fsl_mc 0x300 0>;
++	};
++
++	timer {
++		compatible = "arm,armv8-timer";
++		interrupts = <1 13 0x1>, /* Physical Secure PPI, edge triggered */
++			     <1 14 0x1>, /* Physical Non-Secure PPI, edge triggered */
++			     <1 11 0x1>, /* Virtual PPI, edge triggered */
++			     <1 10 0x1>; /* Hypervisor PPI, edge triggered */
++		arm,reread-timer;
++		fsl,erratum-a008585;
++	};
++
++	fsl_mc: fsl-mc@80c000000 {
++		compatible = "fsl,qoriq-mc";
++		#stream-id-cells = <2>;
++		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
++		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
++		msi-parent = <&its>;
++		#address-cells = <3>;
++		#size-cells = <1>;
++
++		/*
++		 * Region type 0x0 - MC portals
++		 * Region type 0x1 - QBMAN portals
++		 */
++		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
++			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
++
++		/*
++		 * Define the maximum number of MACs present on the SoC.
++		 * They won't necessarily be all probed, since the
++		 * Data Path Layout file and the MC firmware can put fewer
++		 * actual DPMAC objects on the MC bus.
++		 */
++		dpmacs {
++			#address-cells = <1>;
++			#size-cells = <0>;
++
++			dpmac1: dpmac@1 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <1>;
++			};
++			dpmac2: dpmac@2 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <2>;
++			};
++			dpmac3: dpmac@3 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <3>;
++			};
++			dpmac4: dpmac@4 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <4>;
++			};
++			dpmac5: dpmac@5 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <5>;
++			};
++			dpmac6: dpmac@6 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <6>;
++			};
++			dpmac7: dpmac@7 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <7>;
++			};
++			dpmac8: dpmac@8 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <8>;
++			};
++			dpmac9: dpmac@9 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <9>;
++			};
++			dpmac10: dpmac@10 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xa>;
++			};
++			dpmac11: dpmac@11 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xb>;
++			};
++			dpmac12: dpmac@12 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xc>;
++			};
++			dpmac13: dpmac@13 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xd>;
++			};
++			dpmac14: dpmac@14 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xe>;
++			};
++			dpmac15: dpmac@15 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0xf>;
++			};
++			dpmac16: dpmac@16 {
++				compatible = "fsl,qoriq-mc-dpmac";
++				reg = <0x10>;
++			};
++		};
++	};
++
++	ccn@4000000 {
++		compatible = "arm,ccn-504";
++		reg = <0x0 0x04000000 0x0 0x01000000>;
++		interrupts = <0 12 4>;
++	};
++
++	memory@80000000 {
++		device_type = "memory";
++		reg = <0x00000000 0x80000000 0 0x80000000>;
++		      /* DRAM space 1 - 2 GB DRAM */
++	};
++};
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch b/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch
new file mode 100644
index 0000000000..7fb9b17d43
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch
@@ -0,0 +1,138 @@
+From e0f9ccd657893d1a10dfbae291900b3045c471fc Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Mon, 7 Nov 2016 10:38:51 +0800
+Subject: [PATCH 228/238] ls2088a: add ls2088a its
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ kernel2088a-qds.its |   55 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ kernel2088a-rdb.its |   55 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 110 insertions(+)
+ create mode 100644 kernel2088a-qds.its
+ create mode 100644 kernel2088a-rdb.its
+
+diff --git a/kernel2088a-qds.its b/kernel2088a-qds.its
+new file mode 100644
+index 0000000..4732954
+--- /dev/null
++++ b/kernel2088a-qds.its
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++/ {
++	description = "QDS Image file for the LS2080A Linux Kernel";
++	#address-cells = <1>;
++
++	images {
++		kernel@1 {
++			description = "ARM64 Linux kernel";
++			data = /incbin/("./arch/arm64/boot/Image.gz");
++			type = "kernel";
++			arch = "arm64";
++			os = "linux";
++			compression = "gzip";
++			load = <0x80080000>;
++			entry = <0x80080000>;
++		};
++		fdt@1 {
++			description = "Flattened Device Tree blob";
++			data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dtb");
++			type = "flat_dt";
++			arch = "arm64";
++			compression = "none";
++			load = <0x90000000>;
++		};
++		ramdisk@1 {
++			description = "LS2 Ramdisk";
++			data = /incbin/("./fsl-image-core-ls2088aqds.ext2.gz");
++			type = "ramdisk";
++			arch = "arm64";
++			os = "linux";
++			compression = "none";
++		};
++	};
++
++	configurations {
++		default = "config@1";
++		config@1 {
++			description = "Boot Linux kernel";
++			kernel = "kernel@1";
++			fdt = "fdt@1";
++			ramdisk = "ramdisk@1";
++		};
++	};
++};
+diff --git a/kernel2088a-rdb.its b/kernel2088a-rdb.its
+new file mode 100644
+index 0000000..151241f
+--- /dev/null
++++ b/kernel2088a-rdb.its
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++/ {
++	description = "RDB Image file for the LS2080A Linux Kernel";
++	#address-cells = <1>;
++
++	images {
++		kernel@1 {
++			description = "ARM64 Linux kernel";
++			data = /incbin/("./arch/arm64/boot/Image.gz");
++			type = "kernel";
++			arch = "arm64";
++			os = "linux";
++			compression = "gzip";
++			load = <0x80080000>;
++			entry = <0x80080000>;
++		};
++		fdt@1 {
++			description = "Flattened Device Tree blob";
++			data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dtb");
++			type = "flat_dt";
++			arch = "arm64";
++			compression = "none";
++			load = <0x90000000>;
++		};
++		ramdisk@1 {
++			description = "LS2 Ramdisk";
++			data = /incbin/("./fsl-image-core-ls2088ardb.ext2.gz");
++			type = "ramdisk";
++			arch = "arm64";
++			os = "linux";
++			compression = "none";
++		};
++	};
++
++	configurations {
++		default = "config@1";
++		config@1 {
++			description = "Boot Linux kernel";
++			kernel = "kernel@1";
++			fdt = "fdt@1";
++			ramdisk = "ramdisk@1";
++		};
++	};
++};
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch b/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch
new file mode 100644
index 0000000000..f3079a51d6
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch
@@ -0,0 +1,34 @@
+From 6183d512e7539033ccfd177d5f5819302d1fda99 Mon Sep 17 00:00:00 2001
+From: Lijun Pan <Lijun.Pan@freescale.com>
+Date: Wed, 23 Sep 2015 17:06:01 -0500
+Subject: [PATCH 234/238] fsl-ifc: fix compilation error when COMPAT not
+ enabled
+
+When CONFIG_COMPAT is not enabled for cases when 64K pages
+are enabled, there are a series of include dependencies that
+result in some definitions in sched.h that get missed (e.g.
+ TASK_NORMAL).  Explictly include sched.h to resolve this.
+(This seems to be what other drivers do as well)
+
+Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
+[Stuart: updated subject and commit message]
+Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
+---
+ drivers/memory/fsl_ifc.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
+index 03584dc..32c7752 100644
+--- a/drivers/memory/fsl_ifc.c
++++ b/drivers/memory/fsl_ifc.c
+@@ -35,6 +35,7 @@
+ #include <linux/irqdomain.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
++#include <linux/sched.h>
+ 
+ struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+ EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch b/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch
new file mode 100644
index 0000000000..5c1fcd010b
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch
@@ -0,0 +1,35 @@
+From cb8a47d43caa2b07a62d81ee0b65c0d16560c276 Mon Sep 17 00:00:00 2001
+From: Abhimanyu Saini <abhimanyu.saini@nxp.com>
+Date: Fri, 3 Jun 2016 13:15:28 +0530
+Subject: [PATCH 229/238] drivers: clk: qoriq: Add ls2088a key to chipinfo
+ table
+
+---
+ drivers/clk/clk-qoriq.c |   11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
+index 164ac41..6185d6a 100644
+--- a/drivers/clk/clk-qoriq.c
++++ b/drivers/clk/clk-qoriq.c
+@@ -559,6 +559,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
+ 		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
+ 	},
+ 	{
++		.compat = "fsl,ls2088a-clockgen",
++		.cmux_groups = {
++			&clockgen2_cmux_cga12, &clockgen2_cmux_cgb
++		},
++		.cmux_to_group = {
++			0, 0, 1, 1, -1
++		},
++		.pll_mask = 0x37,
++		.flags = CG_VER3 | CG_LITTLE_ENDIAN,
++	},
++	{
+ 		.compat = "fsl,p2041-clockgen",
+ 		.guts_compat = "fsl,qoriq-device-config-1.0",
+ 		.init_periph = p2041_init_periph,
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch b/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch
new file mode 100644
index 0000000000..0feb800367
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch
@@ -0,0 +1,42 @@
+From 1b23a4e0f03063f823ea38065c1106f62a56b408 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 7 Nov 2016 15:03:51 +0800
+Subject: [PATCH 230/238] layerscape/pci: fix linkup issue
+
+commit e6612d785198abbb39142e2acb63f9bff26ab718
+[context adjustment]
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c |   13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index 00feabf..f85ebcf 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,11 +158,16 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ 	struct ls_pcie *pcie = to_ls_pcie(pp);
+-	u32 state;
++	u32 state, offset;
++
++	if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
++		offset = 0x407fc;
++	else
++		offset = PCIE_LUT_DBG;
+ 
+-	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
+-		 pcie->drvdata->ltssm_shift) &
+-		 LTSSM_STATE_MASK;
++	state = (ioread32(pcie->lut + offset) >>
++			pcie->drvdata->ltssm_shift) &
++		LTSSM_STATE_MASK;
+ 
+ 	if (state < LTSSM_PCIE_L0)
+ 		return 0;
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch b/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch
new file mode 100644
index 0000000000..e98e5022ab
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch
@@ -0,0 +1,25 @@
+From c62b4977614e133acc95c61237bcc8fe30581d13 Mon Sep 17 00:00:00 2001
+From: "ying.zhang" <ying.zhang22455@nxp.com>
+Date: Thu, 22 Dec 2016 23:29:39 +0800
+Subject: [PATCH 231/238] driver: clk: qoriq: Add ls2088a clk support
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>wq
+---
+ drivers/clk/clk-qoriq.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
+index 6185d6a..efaa9c1 100644
+--- a/drivers/clk/clk-qoriq.c
++++ b/drivers/clk/clk-qoriq.c
+@@ -1339,6 +1339,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
++CLK_OF_DECLARE(qoriq_clockgen_ls2088a, "fsl,ls2088a-clockgen", clockgen_init);
+ 
+ /* Legacy nodes */
+ CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch b/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch
new file mode 100644
index 0000000000..0967aeb698
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch
@@ -0,0 +1,110 @@
+From a4be9046c3a3fc39a06089553df8cc19a2abd814 Mon Sep 17 00:00:00 2001
+From: Priyanka Jain <Priyanka.Jain@freescale.com>
+Date: Tue, 3 Nov 2015 11:25:24 +0530
+Subject: [PATCH 233/238] i2c: pca954x: Add option to skip disabling PCA954x
+ Mux device
+
+On some Layerscape boards like LS2085ARDB/LS2080ARDB,
+input pull-up resistors on PCA954x Mux device are
+missing on board. So, if mux are disabled after powered-on,
+input lines will float leading to incorrect functionality.
+
+Hence, PCA954x Mux device should never be turned-off after
+power-on.
+
+Add option to skip disabling PCA954x Mux device
+if device tree contians "i2c-mux-never-disable" property
+for pca954x device node.
+
+Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
+---
+ drivers/i2c/muxes/i2c-mux-pca954x.c |   38 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
+index acfcef3..386f86f 100644
+--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
++++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
+@@ -63,6 +63,7 @@ struct pca954x {
+ 	struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
+ 
+ 	u8 last_chan;		/* last register value */
++	u8 disable_mux;		/* do not disable mux if val not 0 */
+ };
+ 
+ struct chip_desc {
+@@ -174,6 +175,13 @@ static int pca954x_deselect_mux(struct i2c_adapter *adap,
+ {
+ 	struct pca954x *data = i2c_get_clientdata(client);
+ 
++#ifdef CONFIG_ARCH_LAYERSCAPE
++	if (data->disable_mux != 0)
++		data->last_chan = chips[data->type].nchans;
++	else
++		data->last_chan = 0;
++	return pca954x_reg_write(adap, client, data->disable_mux);
++#endif
+ 	/* Deselect active channel */
+ 	data->last_chan = 0;
+ 	return pca954x_reg_write(adap, client, data->last_chan);
+@@ -201,6 +209,23 @@ static int pca954x_probe(struct i2c_client *client,
+ 	if (!data)
+ 		return -ENOMEM;
+ 
++#ifdef CONFIG_ARCH_LAYERSCAPE
++	/* The point here is that you must not disable a mux if there
++	 * are no pullups on the input or you mess up the I2C. This
++	 * needs to be put into the DTS really as the kernel cannot
++	 * know this otherwise.
++	 */
++	data->type = id->driver_data;
++	data->disable_mux = of_node &&
++		of_property_read_bool(of_node, "i2c-mux-never-disable") &&
++		chips[data->type].muxtype == pca954x_ismux ?
++		chips[data->type].enable : 0;
++	/* force the first selection */
++	if (data->disable_mux != 0)
++		data->last_chan = chips[data->type].nchans;
++	else
++		data->last_chan = 0;
++#endif
+ 	i2c_set_clientdata(client, data);
+ 
+ 	/* Get the mux out of reset if a reset GPIO is specified. */
+@@ -212,13 +237,19 @@ static int pca954x_probe(struct i2c_client *client,
+ 	 * that the mux is in fact present. This also
+ 	 * initializes the mux to disconnected state.
+ 	 */
++#ifdef CONFIG_ARCH_LAYERSCAPE
++	if (i2c_smbus_write_byte(client, data->disable_mux) < 0) {
++#else
+ 	if (i2c_smbus_write_byte(client, 0) < 0) {
++#endif
+ 		dev_warn(&client->dev, "probe failed\n");
+ 		return -ENODEV;
+ 	}
+ 
++#ifndef CONFIG_ARCH_LAYERSCAPE
+ 	data->type = id->driver_data;
+ 	data->last_chan = 0;		   /* force the first selection */
++#endif
+ 
+ 	idle_disconnect_dt = of_node &&
+ 		of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+@@ -289,6 +320,13 @@ static int pca954x_resume(struct device *dev)
+ 	struct i2c_client *client = to_i2c_client(dev);
+ 	struct pca954x *data = i2c_get_clientdata(client);
+ 
++#ifdef CONFIG_ARCH_LAYERSCAPE
++	if (data->disable_mux != 0)
++		data->last_chan = chips[data->type].nchans;
++	else
++		data->last_chan = 0;
++	return i2c_smbus_write_byte(client, data->disable_mux);
++#endif
+ 	data->last_chan = 0;
+ 	return i2c_smbus_write_byte(client, 0);
+ }
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch b/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch
new file mode 100644
index 0000000000..be91046ac1
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch
@@ -0,0 +1,38 @@
+From 2f3ea65dc8909cbf4116bd74b3dea8d25749508f Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Wed, 23 Nov 2016 11:29:45 +0800
+Subject: [PATCH 235/238] pci/layerscape: fix pci lut offset issue
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c |   13 ++++---------
+ 1 file changed, 4 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index f85ebcf..00feabf 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,16 +158,11 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ 	struct ls_pcie *pcie = to_ls_pcie(pp);
+-	u32 state, offset;
+-
+-	if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
+-		offset = 0x407fc;
+-	else
+-		offset = PCIE_LUT_DBG;
++	u32 state;
+ 
+-	state = (ioread32(pcie->lut + offset) >>
+-			pcie->drvdata->ltssm_shift) &
+-		LTSSM_STATE_MASK;
++	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
++		 pcie->drvdata->ltssm_shift) &
++		 LTSSM_STATE_MASK;
+ 
+ 	if (state < LTSSM_PCIE_L0)
+ 		return 0;
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch b/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch
new file mode 100644
index 0000000000..f5947f7e06
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch
@@ -0,0 +1,84 @@
+From df2373ca941741f3f66750241a048ad4e2ff2c91 Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Thu, 24 Nov 2016 11:47:45 +0800
+Subject: [PATCH 236/238] clk: add API of clks
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/clk/clk.c            |   19 +++++++++++++++++++
+ include/linux/clk-provider.h |    1 +
+ include/linux/clk.h          |    9 +++++++++
+ 3 files changed, 29 insertions(+)
+
+diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
+index f13c3f4..0f6bcf5 100644
+--- a/drivers/clk/clk.c
++++ b/drivers/clk/clk.c
+@@ -359,6 +359,19 @@ static struct clk_core *clk_core_get_parent_by_index(struct clk_core *core,
+ 		return core->parents[index];
+ }
+ 
++struct clk *clk_get_parent_by_index(struct clk *clk, u8 index)
++{
++	struct clk_core *parent;
++
++	if (!clk)
++		return NULL;
++
++	parent = clk_core_get_parent_by_index(clk->core, index);
++
++	return !parent ? NULL : parent->hw->clk;
++}
++EXPORT_SYMBOL_GPL(clk_get_parent_by_index);
++
+ struct clk_hw *
+ clk_hw_get_parent_by_index(const struct clk_hw *hw, unsigned int index)
+ {
+@@ -2033,6 +2046,12 @@ static const struct file_operations clk_summary_fops = {
+ 	.release	= single_release,
+ };
+ 
++unsigned int clk_get_num_parents(struct clk *clk)
++{
++	return !clk ? 0 : clk->core->num_parents;
++}
++EXPORT_SYMBOL_GPL(clk_get_num_parents);
++
+ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
+ {
+ 	if (!c)
+diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
+index 7cd0171..77dfd61 100644
+--- a/include/linux/clk-provider.h
++++ b/include/linux/clk-provider.h
+@@ -650,6 +650,7 @@ unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
+ struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
+ struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
+ 					  unsigned int index);
++struct clk *clk_get_parent_by_index(struct clk *clk, u8 index);
+ unsigned int __clk_get_enable_count(struct clk *clk);
+ unsigned long clk_hw_get_rate(const struct clk_hw *hw);
+ unsigned long __clk_get_flags(struct clk *clk);
+diff --git a/include/linux/clk.h b/include/linux/clk.h
+index 0df4a51..1df90e3 100644
+--- a/include/linux/clk.h
++++ b/include/linux/clk.h
+@@ -392,6 +392,15 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
+ struct clk *clk_get_parent(struct clk *clk);
+ 
+ /**
++ * clk_get_num_parents - get number of possible parents
++ * @clk: clock source
++ *
++ * Returns the number of possible parents of this clock,
++ * which can then be enumerated using clk_get_parent_by_index().
++ */
++unsigned int clk_get_num_parents(struct clk *clk);
++
++/**
+  * clk_get_sys - get a clock based upon the device name
+  * @dev_id: device name
+  * @con_id: connection ID
+-- 
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch b/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch
new file mode 100644
index 0000000000..08e1ecba9a
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch
@@ -0,0 +1,103 @@
+From 562f1311b529d81662ed41786b8d240db2e2ff51 Mon Sep 17 00:00:00 2001
+From: Shengzhou Liu <Shengzhou.Liu@nxp.com>
+Date: Tue, 6 Dec 2016 15:30:39 +0800
+Subject: [PATCH 237/238] pcie/ls208x: use unified compatible
+ "fsl,ls2080a-pcie" for ls208x
+
+To avoid unnecessary reduplication, let's use unified compatible
+"fsl,ls2080a-pcie" for ls2080a, ls2085a, ls2088a.
+
+This patch fixes issue of pcie not working on ls2088a.
+
+Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi |   12 ++++--------
+ drivers/pci/host/pci-layerscape.c              |   13 ++++++++-----
+ 2 files changed, 12 insertions(+), 13 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+index bd69942..07c917b 100644
+--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+@@ -513,8 +513,7 @@
+ 	};
+ 
+ 	pcie1: pcie@3400000 {
+-		compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+-			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ 		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+ 		       0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ 		reg-names = "regs", "config";
+@@ -539,8 +538,7 @@
+ 	};
+ 
+ 	pcie2: pcie@3500000 {
+-		compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
+-			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ 		reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+ 		       0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ 		reg-names = "regs", "config";
+@@ -565,8 +563,7 @@
+ 	};
+ 
+ 	pcie3: pcie@3600000 {
+-		compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+-			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ 		reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+ 		       0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ 		reg-names = "regs", "config";
+@@ -591,8 +588,7 @@
+ 	};
+ 
+ 	pcie4: pcie@3700000 {
+-		compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
+-			     "fsl,ls2085a-pcie", "snps,dw-pcie";
++		compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ 		reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+ 		       0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+ 		reg-names = "regs", "config";
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index 00feabf..3e2100d 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,9 +158,14 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ 	struct ls_pcie *pcie = to_ls_pcie(pp);
+-	u32 state;
++	u32 state, offset;
++
++        if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
++                offset = 0x407fc;
++        else
++                offset = pcie->drvdata->lut_dbg;
+ 
+-	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
++	state = (ioread32(pcie->lut + offset) >>
+ 		 pcie->drvdata->ltssm_shift) &
+ 		 LTSSM_STATE_MASK;
+ 
+@@ -261,7 +266,6 @@ static const struct of_device_id ls_pcie_of_match[] = {
+ 	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
+ 	{ .compatible = "fsl,ls1088a-pcie", .data = &ls1088_drvdata },
+ 	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+-	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
+ 	{ },
+ };
+ MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
+@@ -315,8 +319,7 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
+ 	if (!ls_pcie_is_bridge(pcie))
+ 		return -ENODEV;
+ 
+-	if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2085a-pcie") ||
+-	of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") ||
++	if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") ||
+ 	of_device_is_compatible(pdev->dev.of_node, "fsl,ls1088a-pcie")) {
+ 		int len;
+ 		const u32 *prop;
+-- 
+1.7.9.5
+