ep93xx: remove 3.2 support

SVN-Revision: 31897

4 files changed, 0 insertions, 1521 deletions

diff --git a/target/linux/ep93xx/config-3.2 b/target/linux/ep93xx/config-3.2
deleted file mode 100644
index 7bc567fed2..0000000000
--- a/target/linux/ep93xx/config-3.2
+++ /dev/null
@@ -1,221 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_EP93XX=y
-CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_GETTIMEOFFSET=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-# CONFIG_ARPD is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CMDLINE="console=ttyAM0,57600 init=/etc/preinit"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC7=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRUNCH=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DW_WATCHDOG is not set
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-CONFIG_EP93XX_ETH=y
-CONFIG_EP93XX_SDCE0_PHYS_OFFSET=y
-# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
-# CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET is not set
-CONFIG_EP93XX_WATCHDOG=y
-CONFIG_FB=y
-# CONFIG_FB_ARMCLCD is not set
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_EP93XX=y
-# CONFIG_FB_SM7XX is not set
-# CONFIG_FB_WMT_GE_ROPS is not set
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FW_LOADER is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_EP93XX=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SPARSE_IRQ=y
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_MACH_EDB9302A is not set
-# CONFIG_MACH_EDB9307A is not set
-# CONFIG_MACH_EDB9315A is not set
-CONFIG_MACH_SIM_ONE=y
-# CONFIG_MACH_SNAPPER_CL15 is not set
-# CONFIG_MACH_VISION_EP9307 is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SPI=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_RAM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MACH_MEMORY_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_AMBA_PL010=y
-CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_EP93XX=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_PL022 is not set
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-CONFIG_TOUCHSCREEN_EP93XX=y
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-CONFIG_UID16=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_XZ_DEC=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ep93xx/patches-3.2/001-ep93xx_cpuinfo.patch b/target/linux/ep93xx/patches-3.2/001-ep93xx_cpuinfo.patch
deleted file mode 100644
index 87332a6ec0..0000000000
--- a/target/linux/ep93xx/patches-3.2/001-ep93xx_cpuinfo.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
-This is necessary to be able to set a unique MAC address for DHCP purposes
-by adding a line to /etc/network/interfaces:
-
-# Generate a unique locally-assigned MAC address from the CPU serial number
-pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
-
-It uses the chip revision reading code in the ep93xx-chip-revision patch.
-
-Really, this is wrong, since /proc/cpuinfo should report the revision and
-serial number of the ARM920T processor, while these are the rev and serial
-of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
-/proc/socinfo for this information.
-
-	-martinwguy 14 May 2010
-
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -53,6 +53,12 @@
- #include <asm/traps.h>
- #include <asm/unwind.h>
- 
-+#if defined(CONFIG_ARCH_EP93XX)
-+#include <mach/io.h>
-+#include <mach/ep93xx-regs.h>
-+#include <mach/platform.h>
-+#endif
-+
- #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
- #include "compat.h"
- #endif
-@@ -1062,9 +1068,16 @@ static int c_show(struct seq_file *m, vo
- 	seq_puts(m, "\n");
- 
- 	seq_printf(m, "Hardware\t: %s\n", machine_name);
-+#if defined(CONFIG_ARCH_EP93XX)
-+	seq_printf(m, "Revision\t: %04x\n",
-+	     ep93xx_chip_revision());
-+	seq_printf(m, "Serial\t\t: %016x\n",
-+	     *((unsigned int *)EP93XX_SECURITY_UNIQID));
-+#else
- 	seq_printf(m, "Revision\t: %04x\n", system_rev);
- 	seq_printf(m, "Serial\t\t: %08x%08x\n",
- 		   system_serial_high, system_serial_low);
-+#endif
- 
- 	return 0;
- }
---- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
-+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
-@@ -97,6 +97,8 @@
- #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
- 
- #define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-+#define EP93XX_SECURITY_REG(x)		(EP93XX_SECURITY_BASE + (x))
-+#define EP93XX_SECURITY_UNIQID		EP93XX_SECURITY_REG(0x2440)
- 
- #define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
- #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
diff --git a/target/linux/ep93xx/patches-3.2/003-ep93xx_touchscreen.patch b/target/linux/ep93xx/patches-3.2/003-ep93xx_touchscreen.patch
deleted file mode 100644
index 0294c8f54a..0000000000
--- a/target/linux/ep93xx/patches-3.2/003-ep93xx_touchscreen.patch
+++ /dev/null
@@ -1,1061 +0,0 @@
----
- arch/arm/mach-ep93xx/include/mach/hardware.h   |    1 
- arch/arm/mach-ep93xx/include/mach/regs_touch.h |   95 ++
- drivers/input/touchscreen/Kconfig              |    5 
- drivers/input/touchscreen/Makefile             |    1 
- drivers/input/touchscreen/ep93xx_ts.c          | 1117 +++++++++++++++++++++++++
- drivers/input/touchscreen/ep93xx_ts.h          |   53 +
- 6 files changed, 1272 insertions(+)
-
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -177,6 +177,15 @@ config TOUCHSCREEN_EETI
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called eeti_ts.
- 
-+config TOUCHSCREEN_EP93XX
-+	tristate "EP93xx Touchscreen"
-+	depends on ARM && INPUT && ARCH_EP93XX
-+	help
-+	  Say Y here to enable support for EP93xx touch screen.
-+
-+	  To compile this driver as a module, choose M here:
-+	  the module will be called ep93xx_ts.
-+
- config TOUCHSCREEN_FUJITSU
- 	tristate "Fujitsu serial touchscreen"
- 	select SERIO
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -23,6 +23,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= h
- obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
- obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
- obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
-+obj-$(CONFIG_TOUCHSCREEN_EP93XX)	+= ep93xx_ts.o
- obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
- obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
- obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
---- /dev/null
-+++ b/drivers/input/touchscreen/ep93xx_ts.c
-@@ -0,0 +1,1021 @@
-+/*
-+ * linux/drivers/input/touchscreen/ep93xx_ts.c
-+ *
-+ * Copyright (C) 2003-2004 Cirrus Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/wait.h>
-+#include <linux/fs.h>
-+#include <linux/sched.h>
-+#include <linux/poll.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/compiler.h>
-+#include <linux/timer.h>
-+#include <linux/interrupt.h>
-+#include <linux/syscalls.h>
-+#include <linux/input.h>
-+#include <linux/semaphore.h>
-+#include <asm/irq.h>
-+#include <mach/hardware.h>
-+#include <asm/io.h>
-+
-+/* This stuff should be in ep93xx-regs.h */
-+#define EP93XX_TOUCHSCREEN_REG(x)	(EP93XX_TOUCHSCREEN_BASE + (x))
-+/* R/W touchscreen controller setup control register. */
-+#define EP93XX_TOUCHSCREEN_SETUP	EP93XX_TOUCHSCREEN_REG(0x00)
-+/* R/W touchscreen controller max/min register. */
-+#define EP93XX_TOUCHSCREEN_XYMAXMIN	EP93XX_TOUCHSCREEN_REG(0x04)
-+/* R   touchscreen controller result register. */
-+#define EP93XX_TOUCHSCREEN_XYRESULT	EP93XX_TOUCHSCREEN_REG(0x08)
-+/* LOCKED R/W touchscreen Switch Matrix control register. */
-+#define EP93XX_TOUCHSCREEN_DISCHARGE	EP93XX_TOUCHSCREEN_REG(0x0C)
-+#define EP93XX_TOUCHSCREEN_XSAMPLE	EP93XX_TOUCHSCREEN_REG(0x10)
-+#define EP93XX_TOUCHSCREEN_YSAMPLE	EP93XX_TOUCHSCREEN_REG(0x14)
-+#define EP93XX_TOUCHSCREEN_DIRECT	EP93XX_TOUCHSCREEN_REG(0x18)
-+#define EP93XX_TOUCHSCREEN_DETECT	EP93XX_TOUCHSCREEN_REG(0x1C)
-+/*  NA    R/W touchscreen software lock register. */
-+#define EP93XX_TOUCHSCREEN_SWLOCK	EP93XX_TOUCHSCREEN_REG(0x20)
-+/* R/W touchscreen setup control register #2. */
-+#define EP93XX_TOUCHSCREEN_SETUP2	EP93XX_TOUCHSCREEN_REG(0x24)
-+
-+/* These are duplicated in mach-ep93xx/core.c */
-+#define EP93XX_TIMER_REG(x)	(EP93XX_TIMER_BASE + (x))
-+#define EP93XX_TIMER2_LOAD	EP93XX_TIMER_REG(0x20)
-+#define EP93XX_TIMER2_VALUE	EP93XX_TIMER_REG(0x24)
-+#define EP93XX_TIMER2_CONTROL	EP93XX_TIMER_REG(0x28)
-+#define EP93XX_TIMER2_CLEAR	EP93XX_TIMER_REG(0x2c)
-+
-+/*
-+ * Register bit definitions
-+ */
-+#define TSSETUP_SDLY_MASK	0x000003FF
-+#define TSSETUP_SDLY_SHIFT	0
-+#define TSSETUP_NSMP_4		0x00000000
-+#define TSSETUP_NSMP_8		0x00000400
-+#define TSSETUP_NSMP_16		0x00000800
-+#define TSSETUP_NSMP_32		0x00000C00
-+#define TSSETUP_NSMP_MASK	0x00000C00
-+#define TSSETUP_DEV_4		0x00000000
-+#define TSSETUP_DEV_8		0x00001000
-+#define TSSETUP_DEV_12		0x00002000
-+#define TSSETUP_DEV_16		0x00003000
-+#define TSSETUP_DEV_24		0x00004000
-+#define TSSETUP_DEV_32		0x00005000
-+#define TSSETUP_DEV_64		0x00006000
-+#define TSSETUP_DEV_128		0x00007000
-+#define TSSETUP_ENABLE		0x00008000
-+#define TSSETUP_DLY_MASK	0x03FF0000
-+#define TSSETUP_DLY_SHIFT	16
-+#define TSSETUP_TDTCT		0x80000000
-+
-+#define TSMAXMIN_XMIN_MASK	0x000000FF
-+#define TSMAXMIN_XMIN_SHIFT	0
-+#define TSMAXMIN_YMIN_MASK	0x0000FF00
-+#define TSMAXMIN_YMIN_SHIFT	8
-+#define TSMAXMIN_XMAX_MASK	0x00FF0000
-+#define TSMAXMIN_XMAX_SHIFT	16
-+#define TSMAXMIN_YMAX_MASK	0xFF000000
-+#define TSMAXMIN_YMAX_SHIFT	24
-+
-+#define TSXYRESULT_X_MASK	0x00000FFF
-+#define TSXYRESULT_X_SHIFT	0
-+#define TSXYRESULT_AD_MASK	0x0000FFFF
-+#define TSXYRESULT_AD_SHIFT	0
-+#define TSXYRESULT_Y_MASK	0x0FFF0000
-+#define TSXYRESULT_Y_SHIFT	16
-+#define TSXYRESULT_SDR		0x80000000
-+
-+#define TSX_SAMPLE_MASK		0x00003FFF
-+#define TSX_SAMPLE_SHIFT	0x00
-+#define TSY_SAMPLE_MASK		0x3FFF0000
-+#define TSY_SAMPLE_SHIFT	0x10
-+
-+#define TSSETUP2_TINT		0x00000001
-+#define TSSETUP2_NICOR		0x00000002
-+#define TSSETUP2_PINT		0x00000004
-+#define TSSETUP2_PENSTS		0x00000008
-+#define TSSETUP2_PINTEN		0x00000010
-+#define TSSETUP2_DEVINT		0x00000020
-+#define TSSETUP2_DINTEN		0x00000040
-+#define TSSETUP2_DTMEN		0x00000080
-+#define TSSETUP2_DISDEV		0x00000100
-+#define TSSETUP2_NSIGND		0x00000200
-+#define TSSETUP2_S28EN		0x00000400
-+#define TSSETUP2_RINTEN		0x00000800
-+
-+#define TSXYRESULT_SDR		0x80000000
-+
-+/*
-+ * These are used as trigger levels to know when we have pen up/down.
-+ * The rules:
-+ * 1.  TS_HEAVY_INV_PRESSURE < TS_LIGHT_INV_PRESSURE because these
-+ *    are Inverse pressure.
-+ * 2.  Any touch lighter than TS_LIGHT_INV_PRESSURE is a pen up.
-+ * 3.  Any touch heavier than TS_HEAVY_INV_PRESSURE is a pen down.
-+ */
-+#define TS_HEAVY_INV_PRESSURE 0xFE0 /* C00 */
-+#define TS_LIGHT_INV_PRESSURE 0xFFF /* e00 */
-+
-+/*
-+ * If the x, y, or inverse pressure changes more than these values
-+ * between two succeeding points, the point is not reported.
-+ */
-+#define TS_MAX_VALID_XY_CHANGE		0x300
-+#define TS_MAX_VALID_PRESSURE_CHANGE	0x100
-+
-+/*
-+ * This is the minimum Z1 Value that is valid.
-+ */
-+#define MIN_Z1_VALUE 0x50
-+
-+/*
-+ * Settling delay for taking each ADC measurement.  Increase this
-+ * if ts is jittery.
-+ */
-+#define EP93XX_TS_ADC_DELAY_USEC 2000
-+
-+/*
-+ * Delay between TS points.
-+ */
-+#define EP93XX_TS_PER_POINT_DELAY_USEC 10000
-+
-+/*
-+ * A few more macros...
-+ */
-+#define TSSETUP_DEFAULT  (TSSETUP_NSMP_32 | TSSETUP_DEV_64 |  \
-+			  ((128<<TSSETUP_SDLY_SHIFT) & TSSETUP_SDLY_MASK) | \
-+			  ((128<<TSSETUP_DLY_SHIFT)  & TSSETUP_DLY_MASK))
-+
-+#define TSSETUP2_DEFAULT (TSSETUP2_NSIGND)
-+
-+/*
-+ * For now, we use one of the minor numbers from the local/experimental
-+ * range.
-+ */
-+#define EP93XX_TS_MINOR 240
-+
-+/*
-+ * Static Declarations
-+ */
-+static unsigned int   guiLastX, guiLastY;
-+static unsigned int   guiLastInvPressure;
-+
-+struct TouchScreenSample
-+{
-+    int currentX;
-+    int currentY;
-+    int currentButton;
-+    int currentPressure;
-+    struct timeval currentTime;
-+};
-+
-+/*
-+ * This must match the structure in tslib.
-+ */
-+struct ts_sample {
-+    int x;
-+    int y;
-+    unsigned int pressure;
-+    struct timeval tv;
-+};
-+
-+static struct TouchScreenSample gSample;
-+static int bFreshTouchData;
-+static int bCurrentPenDown;
-+
-+static DECLARE_WAIT_QUEUE_HEAD(queue);
-+static DEFINE_SEMAPHORE(open_sem);
-+static DEFINE_SPINLOCK(event_buffer_lock);
-+static struct fasync_struct *ep93xx_fasync;
-+
-+/*
-+ * Typedef Declarations
-+ */
-+typedef enum {
-+    TS_MODE_UN_INITIALIZED,
-+    TS_MODE_HARDWARE_SCAN,
-+    TS_MODE_SOFT_SCAN
-+} ts_mode_t;
-+
-+static ts_mode_t gScanningMode;
-+
-+typedef enum{
-+    TS_STATE_STOPPED = 0,
-+    TS_STATE_Z1,
-+    TS_STATE_Z2,
-+    TS_STATE_Y,
-+    TS_STATE_X,
-+    TS_STATE_DONE
-+} ts_states_t;
-+
-+typedef struct
-+{
-+    unsigned int uiX;
-+    unsigned int uiY;
-+    unsigned int uiZ1;
-+    unsigned int uiZ2;
-+    ts_states_t  state;
-+} ts_struct_t;
-+
-+static ts_struct_t sTouch;
-+
-+/*
-+ * From the spec, here's how to set up the touch screen's switch registers.
-+ */
-+typedef struct
-+{
-+    unsigned int uiDetect;
-+    unsigned int uiDischarge;
-+    unsigned int uiXSample;
-+    unsigned int uiYSample;
-+    unsigned int uiSwitchZ1;
-+    unsigned int uiSwitchZ2;
-+}SwitchStructType;
-+
-+/*
-+ * Here's the switch settings for a 4-wire touchscreen.  See the spec
-+ * for how to handle a 4, 7, or 8-wire.
-+ */
-+const static SwitchStructType sSwitchSettings =
-+/* s28en=0 */
-+/*   TSDetect    TSDischarge TSXSample   TSYSample   SwitchZ1    SwitchZ2 */
-+    {0x00403604, 0x0007fe04, 0x00081604, 0x00104601, 0x00101601, 0x00101608};
-+
-+/*
-+ * Function declarations
-+ */
-+static void ep93xx_ts_set_direct(unsigned int uiADCSwitch);
-+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id);
-+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id);
-+static void ee93xx_ts_evt_add(int button, int dX, int dY, int Pressure);
-+static ssize_t ep93xx_ts_read(struct file *filp, char *buf,
-+	size_t count, loff_t *l);
-+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait);
-+static int ep93xx_ts_open(struct inode *inode, struct file *filp);
-+static int ep93xx_ts_fasync(int fd, struct file *filp, int on);
-+static int ep93xx_ts_release(struct inode *inode, struct file *filp);
-+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer,
-+		size_t count, loff_t *ppos);
-+static void ep93xx_ts_setup(void);
-+static void ep93xx_ts_shutdown(void);
-+int __init ep93xx_ts_init(void);
-+void __exit ep93xx_ts_exit(void);
-+static unsigned int CalculateInvPressure(void);
-+static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff);
-+static void TS_Soft_Scan_Mode(void);
-+static void TS_Hardware_Scan_Mode(void);
-+static void ProcessPointData(void);
-+static void Set_Timer2_uSec(unsigned int Delay_mSec);
-+static void Stop_Timer2(void);
-+
-+/*
-+ *  ep93xx_ts_isr
-+ */
-+static irqreturn_t ep93xx_ts_isr(int irq, void *dev_id)
-+{
-+    /*
-+     * Note that we don't clear the interrupt here.  The interrupt
-+     * gets cleared in TS_Soft_Scan_Mode when the TS ENABLE
-+     * bit is cleared.
-+     */
-+
-+    /*
-+     * Set the ts to manual polling mode and schedule a callback.
-+     * That way we can return from the isr in a reasonable amount of
-+     * time and process the touch in the callback after a brief delay.
-+     */
-+    TS_Soft_Scan_Mode();
-+
-+    return(IRQ_HANDLED);
-+}
-+
-+/*
-+ * Save the current ts 'event' in an atomic fashion.
-+ */
-+static void ee93xx_ts_evt_add(int buttons, int iX, int iY, int iPressure)
-+{
-+    /*
-+     * Note the event, but use spinlocks to keep it from getting
-+     * halfway read if we get interrupted.
-+     */
-+
-+    spin_lock(&event_buffer_lock);
-+
-+    gSample.currentX        = iX;
-+    gSample.currentY        = iY;
-+    gSample.currentButton   = buttons;
-+    gSample.currentPressure = iPressure;
-+    bFreshTouchData         = 1;
-+    do_gettimeofday(&gSample.currentTime);
-+
-+    spin_unlock(&event_buffer_lock);
-+
-+    kill_fasync(&ep93xx_fasync, SIGIO, POLL_IN);
-+    wake_up_interruptible(&queue);
-+}
-+
-+
-+static ssize_t ep93xx_ts_read(struct file *filp, char *buf, size_t count, loff_t *l)
-+{
-+    unsigned short data[3];
-+    struct  ts_sample   ts_data;
-+    int     iReturn = -EFAULT;
-+
-+    if (!bFreshTouchData)
-+    {
-+	iReturn = 0;
-+    }
-+    else if (count == sizeof(data))
-+    {
-+	spin_lock_irq(&event_buffer_lock);
-+	bFreshTouchData = 0;
-+	data[0] = gSample.currentX;
-+	data[1] = gSample.currentY;
-+	data[2] = gSample.currentButton;
-+
-+	spin_unlock_irq(&event_buffer_lock);
-+
-+	if (copy_to_user(buf, data, sizeof data))
-+	    return -EFAULT;
-+
-+	count -= sizeof(data);
-+
-+	/* return the # of bytes that got read */
-+	iReturn = sizeof(data) ;
-+    }
-+    else if (count == sizeof(struct ts_sample) )
-+    {
-+	spin_lock_irq(&event_buffer_lock);
-+	bFreshTouchData = 0;
-+	ts_data.x           = gSample.currentX;
-+	ts_data.y           = gSample.currentY;
-+	ts_data.pressure    = gSample.currentPressure;
-+	ts_data.tv          = gSample.currentTime;
-+	spin_unlock_irq(&event_buffer_lock);
-+
-+	if (copy_to_user(buf, &ts_data, sizeof(struct ts_sample)))
-+	{
-+	    iReturn = -EFAULT;
-+	}
-+	else
-+	{
-+	    count -= sizeof(ts_data);
-+	    iReturn = sizeof(ts_data);
-+	}
-+    }
-+
-+    return iReturn;
-+}
-+
-+static unsigned int ep93xx_ts_poll(struct file *filp, poll_table *wait)
-+{
-+    poll_wait(filp, &queue, wait);
-+
-+    if (bFreshTouchData)
-+    {
-+	return POLLIN | POLLRDNORM;
-+    }
-+
-+    return 0;
-+}
-+
-+static int ep93xx_ts_open(struct inode *inode, struct file *filp)
-+{
-+    if (down_trylock(&open_sem))
-+    {
-+	return -EBUSY;
-+    }
-+
-+    ep93xx_ts_setup();
-+
-+    return 0;
-+}
-+
-+/*
-+ * Asynchronous I/O support.
-+ */
-+static int ep93xx_ts_fasync(int fd, struct file *filp, int on)
-+{
-+    int retval;
-+
-+    retval = fasync_helper(fd, filp, on, &ep93xx_fasync);
-+    if (retval < 0)
-+    {
-+	return retval;
-+    }
-+
-+    return 0;
-+}
-+
-+static int ep93xx_ts_release(struct inode *inode, struct file *filp)
-+{
-+    Stop_Timer2();
-+
-+    /*
-+     * Call our async I/O support to request that this file
-+     * cease to be used for async I/O.
-+     */
-+    ep93xx_ts_fasync(-1, filp, 0);
-+
-+    ep93xx_ts_shutdown();
-+
-+    up(&open_sem);
-+
-+    return 0;
-+}
-+
-+static ssize_t ep93xx_ts_write(struct file *file, const char *buffer, size_t count,
-+	       loff_t *ppos)
-+{
-+    return -EINVAL;
-+}
-+
-+
-+static int ep93xx_ts_ioctl(struct inode *inode, struct file *file, uint command, ulong u)
-+{
-+    static const int         version = EV_VERSION;
-+    static const u_int32_t   bit =(1 << EV_ABS);
-+    static const u_int32_t   absbit = (1 << ABS_X) | (1 << ABS_Y) | (1 << ABS_PRESSURE);
-+    int         iReturn ;
-+    int         i = 0;
-+
-+    switch(command)
-+    {
-+	case EVIOCGVERSION:
-+	    i = copy_to_user((void __user *)u, (void *)version, sizeof(version));
-+	    iReturn = i ? -EFAULT : 0;
-+	    break;
-+
-+	case EVIOCGBIT(0,sizeof(u_int32_t) * 8) :
-+	    i = copy_to_user((void __user *)u, (void *)bit, sizeof(bit));
-+	    iReturn = i ? -EFAULT : 0;
-+	    break;
-+
-+	case EVIOCGBIT(EV_ABS, sizeof(absbit) * 8):
-+	    i = copy_to_user((void __user *)u, (void *)absbit, sizeof(absbit));
-+	    iReturn = i ? -EFAULT : 0;
-+	    break;
-+	default:
-+	    iReturn = -1;
-+	    break;
-+    }
-+
-+    return iReturn;
-+}
-+
-+static struct file_operations ep93xx_ts_fops = {
-+    owner:      THIS_MODULE,
-+    read:       ep93xx_ts_read,
-+    write:      ep93xx_ts_write,
-+    poll:       ep93xx_ts_poll,
-+    open:       ep93xx_ts_open,
-+    unlocked_ioctl:      ep93xx_ts_ioctl,
-+    release:    ep93xx_ts_release,
-+    fasync:     ep93xx_ts_fasync,
-+};
-+
-+static struct miscdevice ep93xx_ts_miscdev =
-+{
-+	EP93XX_TS_MINOR,
-+	"ep93xx_ts",
-+	&ep93xx_ts_fops
-+};
-+
-+void ep93xx_ts_setup(void)
-+{
-+    unsigned int uiKTDIV, uiTSXYMaxMin;
-+
-+    /*
-+     * Set the TSEN bit in KTDIV so that we are enabling the clock
-+     * for the touchscreen.
-+     */
-+    uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
-+    uiKTDIV |= EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
-+    ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
-+
-+    /*
-+     * Program the EP93XX_TOUCHSCREEN_SETUP and TSSetup2 registers.
-+     */
-+    __raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
-+    __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+    /*
-+     * Set the the touch settings.
-+     */
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DISCHARGE);
-+
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(sSwitchSettings.uiSwitchZ1, EP93XX_TOUCHSCREEN_XSAMPLE);
-+
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(sSwitchSettings.uiSwitchZ2, EP93XX_TOUCHSCREEN_YSAMPLE);
-+
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(sSwitchSettings.uiDetect, EP93XX_TOUCHSCREEN_DETECT);
-+
-+    /*
-+     * X,YMin set to 0x40 = have to drag that many pixels for a new irq.
-+     * X,YMax set to 0x40 = 1024 pixels is the maximum movement within the
-+     * time scan limit.
-+     */
-+    uiTSXYMaxMin =  (50   << TSMAXMIN_XMIN_SHIFT) & TSMAXMIN_XMIN_MASK;
-+    uiTSXYMaxMin |= (50   << TSMAXMIN_YMIN_SHIFT) & TSMAXMIN_YMIN_MASK;
-+    uiTSXYMaxMin |= (0xff << TSMAXMIN_XMAX_SHIFT) & TSMAXMIN_XMAX_MASK;
-+    uiTSXYMaxMin |= (0xff << TSMAXMIN_YMAX_SHIFT) & TSMAXMIN_YMAX_MASK;
-+    __raw_writel(uiTSXYMaxMin, EP93XX_TOUCHSCREEN_XYMAXMIN);
-+
-+    bCurrentPenDown = 0;
-+    bFreshTouchData = 0;
-+    guiLastX = 0;
-+    guiLastY = 0;
-+    guiLastInvPressure = 0xffffff;
-+
-+    /*
-+     * Enable the touch screen scanning engine.
-+     */
-+    TS_Hardware_Scan_Mode();
-+}
-+
-+/*
-+ * ep93xx_ts_shutdown
-+ *
-+ */
-+static void
-+ep93xx_ts_shutdown(void)
-+{
-+    unsigned int uiKTDIV;
-+
-+    sTouch.state = TS_STATE_STOPPED;
-+    Stop_Timer2();
-+
-+    /*
-+     * Disable the scanning engine.
-+     */
-+    __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP);
-+    __raw_writel(0, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+    /*
-+     * Clear the TSEN bit in KTDIV so that we are disabling the clock
-+     * for the touchscreen.
-+     */
-+    uiKTDIV = __raw_readl(EP93XX_SYSCON_KEYTCHCLKDIV);
-+    uiKTDIV &= ~EP93XX_SYSCON_KEYTCHCLKDIV_TSEN;
-+    ep93xx_syscon_swlocked_write(uiKTDIV, EP93XX_SYSCON_KEYTCHCLKDIV);
-+
-+} /* ep93xx_ts_shutdown */
-+
-+static irqreturn_t ep93xx_timer2_isr(int irq, void *dev_id)
-+{
-+    switch(sTouch.state)
-+    {
-+	case TS_STATE_STOPPED:
-+	    TS_Hardware_Scan_Mode();
-+	    break;
-+
-+	/*
-+	 * Get the Z1 value for pressure measurement and set up
-+	 * the switch register for getting the Z2 measurement.
-+	 */
-+	case TS_STATE_Z1:
-+	    Set_Timer2_uSec(EP93XX_TS_ADC_DELAY_USEC);
-+	    sTouch.uiZ1 = ADCGetData(2, 200);
-+	    ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ2);
-+	    sTouch.state = TS_STATE_Z2;
-+	    break;
-+
-+	/*
-+	 * Get the Z2 value for pressure measurement and set up
-+	 * the switch register for getting the Y measurement.
-+	 */
-+	case TS_STATE_Z2:
-+	    sTouch.uiZ2 = ADCGetData(2, 200);
-+	    ep93xx_ts_set_direct(sSwitchSettings.uiYSample);
-+	    sTouch.state = TS_STATE_Y;
-+	    break;
-+
-+	/*
-+	 * Get the Y value and set up the switch register for
-+	 * getting the X measurement.
-+	 */
-+	case TS_STATE_Y:
-+	    sTouch.uiY = ADCGetData(4, 20);
-+	    ep93xx_ts_set_direct(sSwitchSettings.uiXSample);
-+	    sTouch.state = TS_STATE_X;
-+	    break;
-+
-+	/*
-+	 * Read the X value.  This is the last of the 4 adc values
-+	 * we need so we continue on to process the data.
-+	 */
-+	case TS_STATE_X:
-+	    Stop_Timer2();
-+
-+	    sTouch.uiX = ADCGetData(4, 20);
-+
-+	    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+	    __raw_writel(sSwitchSettings.uiDischarge, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+	    sTouch.state = TS_STATE_DONE;
-+
-+	    /*
-+	     * Process this set of ADC readings.
-+	     */
-+	    ProcessPointData();
-+
-+	    break;
-+
-+	/*
-+	 * Shouldn't get here.  But if we do, we can recover...
-+	 */
-+	case TS_STATE_DONE:
-+	    TS_Hardware_Scan_Mode();
-+	    break;
-+    }
-+
-+    /*
-+     * Clear the timer2 interrupt.
-+     */
-+    __raw_writel(1, EP93XX_TIMER2_CLEAR);
-+    return(IRQ_HANDLED);
-+}
-+
-+/*---------------------------------------------------------------------
-+ * ProcessPointData
-+ *
-+ * This routine processes the ADC data into usable point data and then
-+ * puts the driver into hw or sw scanning mode before returning.
-+ *
-+ * We calculate inverse pressure (lower number = more pressure) then
-+ * do a hystheresis with the two pressure values 'light' and 'heavy'.
-+ *
-+ * If we are above the light, we have pen up.
-+ * If we are below the heavy we have pen down.
-+ * As long as the pressure stays below the light, pen stays down.
-+ * When we get above the light again, pen goes back up.
-+ *
-+ */
-+static void ProcessPointData(void)
-+{
-+    int  bValidPoint = 0;
-+    unsigned int   uiXDiff, uiYDiff, uiInvPressureDiff;
-+    unsigned int   uiInvPressure;
-+
-+    /*
-+     * Calculate the current pressure.
-+     */
-+    uiInvPressure = CalculateInvPressure();
-+
-+    /*
-+     * If pen pressure is so light that it is greater than the 'max' setting
-+     * then we consider this to be a pen up.
-+     */
-+    if (uiInvPressure >= TS_LIGHT_INV_PRESSURE)
-+    {
-+	bCurrentPenDown = 0;
-+	ee93xx_ts_evt_add(0, guiLastX, guiLastY, 0);
-+	TS_Hardware_Scan_Mode();
-+	return;
-+    }
-+
-+    /*
-+     * Hysteresis:
-+     * If the pen pressure is hard enough to be less than the 'min' OR
-+     * the pen is already down and is still less than the 'max'...
-+     */
-+    if ((uiInvPressure < TS_HEAVY_INV_PRESSURE) ||
-+	(bCurrentPenDown && (uiInvPressure < TS_LIGHT_INV_PRESSURE)))
-+    {
-+	if (bCurrentPenDown)
-+	{
-+	    /*
-+	     * If pen was previously down, check the difference between
-+	     * the last sample and this one... if the difference between
-+	     * samples is too great, ignore the sample.
-+	     */
-+	    uiXDiff = abs(guiLastX - sTouch.uiX);
-+	    uiYDiff = abs(guiLastY - sTouch.uiY);
-+	    uiInvPressureDiff = abs(guiLastInvPressure - uiInvPressure);
-+
-+	    if (uiXDiff < TS_MAX_VALID_XY_CHANGE
-+		&& uiYDiff < TS_MAX_VALID_XY_CHANGE
-+		&& uiInvPressureDiff < TS_MAX_VALID_PRESSURE_CHANGE)
-+	    {
-+		bValidPoint = 1;
-+	    }
-+	}
-+	else
-+	{
-+	    bValidPoint = 1;
-+	}
-+
-+	/*
-+	 * If either the pen was put down or dragged make a note of it.
-+	 */
-+	if (bValidPoint)
-+	{
-+	    guiLastX = sTouch.uiX;
-+	    guiLastY = sTouch.uiY;
-+	    guiLastInvPressure = uiInvPressure;
-+	    bCurrentPenDown = 1;
-+	    ee93xx_ts_evt_add(1, sTouch.uiX, sTouch.uiY,
-+			      0x7000000 / uiInvPressure);
-+	}
-+
-+	TS_Soft_Scan_Mode();
-+	return;
-+    }
-+
-+    TS_Hardware_Scan_Mode();
-+}
-+
-+static void ep93xx_ts_set_direct(unsigned int uiADCSwitch)
-+{
-+    unsigned int uiResult;
-+
-+    /*
-+     * Set the switch settings in the direct register.
-+     */
-+    __raw_writel(0xaa, EP93XX_TOUCHSCREEN_SWLOCK);
-+    __raw_writel(uiADCSwitch, EP93XX_TOUCHSCREEN_DIRECT);
-+
-+    /*
-+     * Read and throw away the first sample.
-+     */
-+    do {
-+	uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
-+    } while (!(uiResult & TSXYRESULT_SDR));
-+
-+}
-+
-+static unsigned int ADCGetData(unsigned int uiSamples, unsigned int uiMaxDiff)
-+{
-+    unsigned int uiResult, uiValue, uiCount, uiLowest, uiHighest, uiSum, uiAve;
-+
-+    do
-+    {
-+	/*
-+	 * Initialize our values.
-+	 */
-+	uiLowest        = 0xfffffff;
-+	uiHighest       = 0;
-+	uiSum           = 0;
-+
-+	for (uiCount = 0; uiCount < uiSamples; uiCount++)
-+	{
-+	    /*
-+	     * Read the touch screen four more times and average.
-+	     */
-+	    do {
-+		uiResult = __raw_readl(EP93XX_TOUCHSCREEN_XYRESULT);
-+	    } while (!(uiResult & TSXYRESULT_SDR));
-+
-+	    uiValue = (uiResult & TSXYRESULT_AD_MASK) >> TSXYRESULT_AD_SHIFT;
-+	    uiValue = ((uiValue >> 4) + ((1 + TSXYRESULT_X_MASK)>>1)) & TSXYRESULT_X_MASK;
-+
-+	    /*
-+	     * Add up the values.
-+	     */
-+	    uiSum += uiValue;
-+
-+	    /*
-+	     * Get the lowest and highest values.
-+	     */
-+	    if (uiValue < uiLowest)
-+	    {
-+		uiLowest = uiValue;
-+	    }
-+	    if (uiValue > uiHighest)
-+	    {
-+		uiHighest = uiValue;
-+	    }
-+	}
-+    } while ((uiHighest - uiLowest) > uiMaxDiff);
-+
-+    /*
-+     * Calculate the Average value.
-+     */
-+    uiAve = uiSum / uiSamples;
-+
-+    return uiAve;
-+}
-+
-+/*
-+ * CalculateInvPressure
-+ *
-+ * Is the Touch Valid.  Touch is not valid if the X or Y value is not
-+ * in range and the pressure is not  enough.
-+ *
-+ * Touch resistance can be measured by the following formula:
-+ *
-+ *          Rx * X *     Z2
-+ * Rtouch = --------- * (-- - 1)
-+ *           4096        Z1
-+ *
-+ * This is simplified in the ration of Rtouch to Rx.  The lower the value, the
-+ * higher the pressure.
-+ *
-+ *                     Z2
-+ * InvPressure =  X * (-- - 1)
-+ *                     Z1
-+ */
-+static unsigned int CalculateInvPressure(void)
-+{
-+    unsigned int uiInvPressure;
-+
-+    /*
-+     * Check to see if the point is valid.
-+     */
-+    if (sTouch.uiZ1 < MIN_Z1_VALUE)
-+    {
-+	uiInvPressure = 0x10000;
-+    }
-+
-+    /*
-+     * Can omit the pressure calculation if you need to get rid of the division.
-+     */
-+    else
-+    {
-+	uiInvPressure = ((sTouch.uiX * sTouch.uiZ2) / sTouch.uiZ1) - sTouch.uiX;
-+    }
-+
-+    return uiInvPressure;
-+}
-+
-+/*
-+ * TS_Hardware_Scan_Mode
-+ *
-+ * Enables the ep93xx ts scanning engine so that when the pen goes down
-+ * we will get an interrupt.
-+ */
-+static void TS_Hardware_Scan_Mode(void)
-+{
-+    unsigned int uiDevCfg;
-+
-+    /*
-+     * Disable the soft scanning engine.
-+     */
-+    sTouch.state = TS_STATE_STOPPED;
-+    Stop_Timer2();
-+
-+    /*
-+     * Clear the TIN (Touchscreen INactive) bit so we can go to
-+     * automatic scanning mode.
-+     */
-+    uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-+    ep93xx_syscon_swlocked_write(uiDevCfg & ~EP93XX_SYSCON_DEVCFG_TIN,
-+				 EP93XX_SYSCON_DEVCFG);
-+
-+    /*
-+     * Enable the touch screen scanning state machine by setting
-+     * the ENABLE bit.
-+     */
-+    __raw_writel(TSSETUP_DEFAULT | TSSETUP_ENABLE, EP93XX_TOUCHSCREEN_SETUP);
-+
-+    /*
-+     * Set the flag to show that we are in interrupt mode.
-+     */
-+    gScanningMode = TS_MODE_HARDWARE_SCAN;
-+
-+    /*
-+     * Initialize EP93XX_TOUCHSCREEN_SETUP2 register.
-+     */
-+    __raw_writel(TSSETUP2_DEFAULT, EP93XX_TOUCHSCREEN_SETUP2);
-+
-+}
-+
-+/*
-+ * TS_Soft_Scan_Mode
-+ *
-+ * Sets the touch screen to manual polling mode.
-+ */
-+static void TS_Soft_Scan_Mode(void)
-+{
-+    unsigned int uiDevCfg;
-+
-+    if (gScanningMode != TS_MODE_SOFT_SCAN)
-+    {
-+	/*
-+	 * Disable the touch screen scanning state machine by clearing
-+	 * the ENABLE bit.
-+	 */
-+	__raw_writel(TSSETUP_DEFAULT, EP93XX_TOUCHSCREEN_SETUP);
-+
-+	/*
-+	 * Set the TIN bit so we can do manual touchscreen polling.
-+	 */
-+	uiDevCfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
-+	ep93xx_syscon_swlocked_write(uiDevCfg | EP93XX_SYSCON_DEVCFG_TIN,
-+				     EP93XX_SYSCON_DEVCFG);
-+    }
-+
-+    /*
-+     * Set the switch register up for the first ADC reading
-+     */
-+    ep93xx_ts_set_direct(sSwitchSettings.uiSwitchZ1);
-+
-+    /*
-+     * Initialize our software state machine to know which ADC
-+     * reading to take
-+     */
-+    sTouch.state = TS_STATE_Z1;
-+
-+    /*
-+     * Set the timer so after a mSec or two settling delay it will
-+     * take the first ADC reading.
-+     */
-+    Set_Timer2_uSec(EP93XX_TS_PER_POINT_DELAY_USEC);
-+
-+    /*
-+     * Note that we are in sw scanning mode not hw scanning mode.
-+     */
-+    gScanningMode = TS_MODE_SOFT_SCAN;
-+
-+}
-+
-+static void Set_Timer2_uSec(unsigned int uiDelay_uSec)
-+{
-+    unsigned int uiClockTicks;
-+
-+    /*
-+     * Stop timer 2
-+     */
-+    __raw_writel(0, EP93XX_TIMER2_CONTROL);
-+
-+    uiClockTicks = ((uiDelay_uSec * 508) + 999) / 1000;
-+    __raw_writel(uiClockTicks, EP93XX_TIMER2_LOAD);
-+    __raw_writel(uiClockTicks, EP93XX_TIMER2_VALUE);
-+
-+    /*
-+     * Set up Timer 2 for 508 kHz clock and periodic mode.
-+     */
-+    __raw_writel(0xC8, EP93XX_TIMER2_CONTROL);
-+
-+}
-+
-+static void Stop_Timer2(void)
-+{
-+    __raw_writel(0, EP93XX_TIMER2_CONTROL);
-+}
-+
-+/*
-+ * Initialization and exit routines
-+ */
-+int __init ep93xx_ts_init(void)
-+{
-+    int retval;
-+
-+    retval = request_irq(IRQ_EP93XX_TOUCH, ep93xx_ts_isr,
-+			 IRQF_DISABLED, "ep93xx_ts", 0);
-+    if (retval)
-+    {
-+	printk(KERN_WARNING "ep93xx_ts: failed to get touchscreen IRQ\n");
-+	return retval;
-+    }
-+
-+    retval = request_irq(IRQ_EP93XX_TIMER2, ep93xx_timer2_isr,
-+			 IRQF_DISABLED, "ep93xx_timer2", 0);
-+    if (retval)
-+    {
-+	printk(KERN_WARNING "ep93xx_ts: failed to get timer2 IRQ\n");
-+	free_irq(IRQ_EP93XX_TOUCH, 0);
-+	return retval;
-+    }
-+
-+    misc_register(&ep93xx_ts_miscdev);
-+
-+    sTouch.state = TS_STATE_STOPPED;
-+    gScanningMode = TS_MODE_UN_INITIALIZED;
-+
-+    printk(KERN_NOTICE "ep93xx touchscreen driver configured for 4-wire operation\n");
-+
-+    return 0;
-+}
-+
-+void __exit ep93xx_ts_exit(void)
-+{
-+    Stop_Timer2();
-+
-+    free_irq(IRQ_EP93XX_TOUCH, 0);
-+    free_irq(IRQ_EP93XX_TIMER2, 0);
-+
-+    misc_deregister(&ep93xx_ts_miscdev);
-+}
-+
-+module_init(ep93xx_ts_init);
-+module_exit(ep93xx_ts_exit);
-+
-+MODULE_DESCRIPTION("Cirrus EP93xx touchscreen driver");
-+MODULE_SUPPORTED_DEVICE("touchscreen/ep93xx");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/ep93xx/patches-3.2/004-simone_add_mmc_spi.patch b/target/linux/ep93xx/patches-3.2/004-simone_add_mmc_spi.patch
deleted file mode 100644
index 2ca29d7e21..0000000000
--- a/target/linux/ep93xx/patches-3.2/004-simone_add_mmc_spi.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-This enables the mmc-over-spi driver for the Sim.One board, based on Mika's
-patch, which used a GPIO for chip select in stead of the default SFRMOUT pin.
-I've modified it to use the usual SFRMOUT; if you've modified your Sim.One
-board to use a GPIO instead, uncomment and modify
-// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
-in the source file.
-   -martinwguy, 14 May 2010
-
-From: Mika Westerberg <mika.westerberg@iki.fi>
-Date: Wed, 28 Apr 2010 08:42:46 +0300
-Subject: [PATCH] ep93xx: simone: added board specific SPI support for MMC/SD cards
-
-This includes setting up EGPIOs 0 and 9 for card detection and chip select
-respectively.
-
---- a/arch/arm/mach-ep93xx/simone.c
-+++ b/arch/arm/mach-ep93xx/simone.c
-@@ -18,12 +18,17 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/gpio.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
-+#include <linux/mmc/host.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/mmc_spi.h>
- 
- #include <mach/hardware.h>
- #include <mach/fb.h>
- #include <mach/gpio-ep93xx.h>
-+#include <mach/ep93xx_spi.h>
- 
- #include <asm/mach-types.h>
- #include <asm/mach/arch.h>
-@@ -38,6 +43,135 @@ static struct ep93xxfb_mach_info __initd
- 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
- };
- 
-+/*
-+ * GPIO lines used for MMC card detection.
-+ */
-+#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0
-+
-+/*
-+ * If you have hacked your Sim.One to use a GPIO as SD card chip select
-+ * (SD pin 1), uncomment the following line.
-+ * The example, EGPIO15, is on TP17 near the CPU.
-+ */
-+// #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO15
-+
-+/*
-+ * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal,
-+ * you can leave these empty and pass NULL as .controller_data.
-+ */
-+
-+#ifdef MMC_CHIP_SELECT_GPIO
-+static int simone_mmc_spi_setup(struct spi_device *spi)
-+{
-+	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
-+	int err;
-+
-+	err = gpio_request(gpio, spi->modalias);
-+	if (err)
-+		return err;
-+
-+	err = gpio_direction_output(gpio, 1);
-+	if (err) {
-+		gpio_free(gpio);
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static void simone_mmc_spi_cleanup(struct spi_device *spi)
-+{
-+	unsigned int gpio = MMC_CHIP_SELECT_GPIO;
-+
-+	gpio_set_value(gpio, 1);
-+	gpio_direction_input(gpio);
-+	gpio_free(gpio);
-+}
-+
-+static void simone_mmc_spi_cs_control(struct spi_device *spi, int value)
-+{
-+	gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
-+}
-+
-+static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = {
-+	.setup		= simone_mmc_spi_setup,
-+	.cleanup	= simone_mmc_spi_cleanup,
-+	.cs_control	= simone_mmc_spi_cs_control,
-+};
-+#endif
-+
-+/*
-+ * MMC card detection GPIO setup.
-+ */
-+static int simone_mmc_spi_init(struct device *dev,
-+	irqreturn_t (*irq_handler)(int, void *), void *mmc)
-+{
-+	unsigned int gpio = MMC_CARD_DETECT_GPIO;
-+	int irq, err;
-+
-+	err = gpio_request(gpio, dev_name(dev));
-+	if (err)
-+		return err;
-+
-+	err = gpio_direction_input(gpio);
-+	if (err)
-+		goto fail;
-+
-+	irq = gpio_to_irq(gpio);
-+	if (irq < 0)
-+		goto fail;
-+
-+	err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING,
-+				"MMC card detect", mmc);
-+	if (err)
-+		goto fail;
-+
-+	printk(KERN_INFO "%s: using irq %d for MMC card detection\n",
-+		dev_name(dev), irq);
-+
-+	return 0;
-+fail:
-+	gpio_free(gpio);
-+	return err;
-+}
-+
-+static void simone_mmc_spi_exit(struct device *dev, void *mmc)
-+{
-+	unsigned int gpio = MMC_CARD_DETECT_GPIO;
-+
-+	free_irq(gpio_to_irq(gpio), mmc);
-+	gpio_free(gpio);
-+}
-+
-+static struct mmc_spi_platform_data simone_mmc_spi_data = {
-+	.init		= simone_mmc_spi_init,
-+	.exit		= simone_mmc_spi_exit,
-+	.detect_delay	= 500,
-+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-+};
-+
-+static struct spi_board_info simone_spi_devices[] __initdata = {
-+	{
-+		.modalias		= "mmc_spi",
-+#ifdef MMC_CHIP_SELECT_GPIO
-+		.controller_data	= &simone_mmc_spi_ops,
-+#endif
-+		.platform_data		= &simone_mmc_spi_data,
-+		/*
-+		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-+		 * will limit it automatically to max. frequency.
-+		 */
-+		.max_speed_hz		= 10 * 1000 * 1000,
-+		.bus_num		= 0,
-+		.chip_select		= 0,
-+		.mode			= SPI_MODE_3,
-+	},
-+};
-+
-+static struct ep93xx_spi_info simone_spi_info __initdata = {
-+	.num_chipselect = ARRAY_SIZE(simone_spi_devices),
-+};
-+
- static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
- 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
- 	.sda_is_open_drain	= 0,
-@@ -72,6 +206,8 @@ static void __init simone_init_machine(v
- 	ep93xx_register_fb(&simone_fb_info);
- 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
- 			    ARRAY_SIZE(simone_i2c_board_info));
-+	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-+			    ARRAY_SIZE(simone_spi_devices));
- 	simone_register_audio();
- }
-