move diag from target/linux/package/ to package/.

git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@3976 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 0 insertions, 310 deletions

diff --git a/target/linux/package/diag/Config.in b/target/linux/package/diag/Config.in
deleted file mode 100644
index 80cba50cf2..0000000000
--- a/target/linux/package/diag/Config.in
+++ /dev/null
@@ -1,7 +0,0 @@
-config PACKAGE_KMOD_DIAG
-	prompt "kmod-diag......................... Driver for router LEDs and Buttons"
-	tristate
-	depends LINUX_2_4_BRCM
-	default y
-	help
-	  Driver for router LEDs and Buttons
diff --git a/target/linux/package/diag/Makefile b/target/linux/package/diag/Makefile
deleted file mode 100644
index 3329ee9852..0000000000
--- a/target/linux/package/diag/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# Makefile for the diag module
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME := kmod-diag
-PKG_RELEASE := 1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(TOPDIR)/package/rules.mk
-
-$(eval $(call PKG_template,KMOD_DIAG,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
-
-DIAG_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
-		-mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \
-		-Wa,-mips32 -Wa,--trap -Wstrict-prototypes -Wno-trigraphs -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -nostdinc \
-		-iwithprefix include -I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/asm/gcc -c -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-
-$(PKG_BUILD_DIR)/.prepared:
-	mkdir -p $(PKG_BUILD_DIR)
-	touch $@
-
-$(PKG_BUILD_DIR)/.built:
-	$(TARGET_CC) $(DIAG_FLAGS) -o $(PKG_BUILD_DIR)/diag.o diag_led.c
-	touch $@
-	
-$(IPKG_KMOD_DIAG):
-	mkdir -p $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)
-	$(CP) $(PKG_BUILD_DIR)/diag.o $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)/
-	$(IPKG_BUILD) $(IDIR_KMOD_DIAG) $(PACKAGE_DIR)
diff --git a/target/linux/package/diag/diag_led.c b/target/linux/package/diag/diag_led.c
deleted file mode 100644
index 6ad7ff102f..0000000000
--- a/target/linux/package/diag/diag_led.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * diag_led.c - replacement diag module
- *
- * Copyright (C) 2004 Mike Baker,
- *                    Imre Kaloz <kaloz@dune.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- */
-
-/*
- * ChangeLog:
- * 2004/03/28 initial release 
- * 2004/08/26 asus & buffalo support added
- * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
- * 2005/04/13 added licensing informations
- * 2005/04/18 base reset polarity off initial readings
- * 2006/02/07 motorola wa840g/we800g support added
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO  (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
-	sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
-	sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
-	sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
-}
-
-static void v2_set_diag(u8 state) {
-	set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
-	set_gpio(DMZ_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG   0x13
-#define LED_DMZ    0x12
-
-static void v1_set_diag(u8 state) {
-	if (!state) {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-	} else {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-	}
-}
-static void v1_set_dmz(u8 state) {
-	if (!state) {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-	} else {
-		*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-	}
-}
-
-static void wap1_set_diag(u8 state) {
-       set_gpio(1<<3,state);
-}
-static void wap1_set_dmz(u8 state) {
-       set_gpio(1<<4,state);
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ         0x01
-#define BIT_DIAG        0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-
-static unsigned int diag = 0;
-
-static void diag_change()
-{
-	set_diag(0xFF); // off
-	set_dmz(0xFF); // off
-
-	if(diag & BIT_DIAG)
-		set_diag(0x00); // on
-	if(diag & BIT_DMZ)
-		set_dmz(0x00); // on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
-		void *buffer, size_t *lenp)
-{
-	int r;
-	r = proc_dointvec(table, write, filp, buffer, lenp);
-	if (write && !r) {
-		diag_change();
-	}
-	return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
-		void *buffer, size_t *lenp)
-{
-
-	if (reset_gpio) {
-		sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-		sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-		reset=!(sb_gpioin(sbh)&reset_gpio);
-
-		if (reset_polarity) reset=!reset;
-	} else {
-		reset=0;
-	}
-
-	return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
-         { 
-	   ctl_name: 2000,
-	   procname: "diag", 
-	   data: &diag,
-	   maxlen: sizeof(diag), 
-	   mode: 0644,
-	   proc_handler: proc_diag
-	 },
-	 {
-	   ctl_name: 2001,
-	   procname: "reset",
-	   data: &reset,
-	   maxlen: sizeof(reset),
-	   mode: 0444,
-	   proc_handler: proc_reset 
-	 },
-         { 0 }
-};
-
-static int __init diag_init()
-{
-	char *buf;
-	u32 board_type;
-	sbh = sb_kattach();
-	sb_gpiosetcore(sbh);
-
-	board_type = sb_boardtype(sbh);
-	printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
-	set_diag=ignore;
-	set_dmz=ignore;
-	
-	buf=nvram_get("pmon_ver") ?: "";
-	if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
-		buf=nvram_get("boardtype")?:"";
-		if (!strncmp(buf,"bcm94710dev",11)) {
-			buf=nvram_get("boardnum")?:"";
-			if (!strcmp(buf,"42")) {
-				// wrt54g v1.x
-				set_diag=v1_set_diag;
-				set_dmz=v1_set_dmz;
-				reset_gpio=(1<<6);
-			}
-			if (simple_strtoul(buf, NULL, 0) == 2) {
-				// wap54g v1.0
-				// do not use strcmp as PMON v5.3.22 has some built-in nvram 
-				// defaults with trailing \r
-				set_diag=wap1_set_diag;
-				// no dmz led on wap54g, used green led 
-				// labeled "WLAN Link" instead
-				set_dmz=wap1_set_dmz;
-				reset_gpio=(1<<0);
-			}
-			if (!strcmp(buf,"asusX")) {
-				//asus wl-500g
-				reset_gpio=(1<<6);
-			}
-			if (!strcmp(buf,"2")) {
-				//wa840g v1 / we800g v1
-				reset_gpio=(1<<0);
-			}
-		}
-		if (!strcmp(buf,"bcm94710ap")) {
-			buf=nvram_get("boardnum")?:"";
-			if (!strcmp(buf,"42")) {
-				// buffalo
-				set_dmz=v2_set_dmz;
-				reset_gpio=(1<<4);
-			}
-			if (!strcmp(buf,"44")) {
-				//dell truemobile
-				set_dmz=v2_set_dmz;
-				reset_gpio=(1<<0);
-			}
-		}
-	} else {
-		buf=nvram_get("boardnum")?:"";
-		if (!strcmp(buf,"42")) {
-			//linksys
-			set_diag=v2_set_diag;
-			set_dmz=v2_set_dmz;
-			reset_gpio=(1<<6);
-		}
-		if (!strcmp(buf,"44")) {
-			//motorola
-			reset_gpio=(1<<5);
-		}
-		if (!strcmp(buf,"00")) {
-			//buffalo
-			reset_gpio=(1<<7);
-		}
-		if (!strcmp(buf,"45")) {
-			//wl-500g deluxe
-			reset_gpio=(1<<6);
-		}
-	}
-
-	
-	sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-	sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-	reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-
-	diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-	diag_change();
-
-	return 0;
-}
-
-static void __exit diag_exit()
-{
-	unregister_sysctl_table(diag_sysctl_header);
-}
-
-EXPORT_NO_SYMBOLS;
-MODULE_AUTHOR("openwrt.org");
-MODULE_LICENSE("GPL");
-
-module_init(diag_init);
-module_exit(diag_exit);
diff --git a/target/linux/package/diag/ipkg/kmod-diag.control b/target/linux/package/diag/ipkg/kmod-diag.control
deleted file mode 100644
index 9c93926b3a..0000000000
--- a/target/linux/package/diag/ipkg/kmod-diag.control
+++ /dev/null
@@ -1,4 +0,0 @@
-Package: kmod-diag
-Priority: essential
-Section: sys
-Description: Driver for Router LEDs and Buttons