aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorSven Eckelmann <sven@narfation.org>2020-11-23 13:41:34 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-19 21:41:26 +0100
commit0988e03f0e676286f3377d1530ebfb0d819ee629 (patch)
treebc4b0805dfa68987f0c6ad6185e80e48122f053a /target
parentae7680dc4bf914d640dba32c8f1c36631768a56a (diff)
downloadupstream-0988e03f0e676286f3377d1530ebfb0d819ee629.tar.gz
upstream-0988e03f0e676286f3377d1530ebfb0d819ee629.tar.bz2
upstream-0988e03f0e676286f3377d1530ebfb0d819ee629.zip
ath79: Add support for OpenMesh MR1750 v2
Device specifications: ====================== * Qualcomm/Atheros QCA9558 ver 1 rev 0 * 720/600/240 MHz (CPU/DDR/AHB) * 128 MB of RAM * 16 MB of SPI NOR flash - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 3T3R 2.4 GHz Wi-Fi (11n) * 3T3R 5 GHz Wi-Fi (11ac) * 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default)) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 1x ethernet - AR8035 ethernet PHY (RGMII) - 10/100/1000 Mbps Ethernet - 802.3af POE - used as LAN interface * 12-24V 1A DC * internal antennas Flashing instructions: ====================== Various methods can be used to install the actual image on the flash. Two easy ones are: ap51-flash ---------- The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the image to the u-boot when the device boots up. initramfs from TFTP ------------------- The serial console must be used to access the u-boot shell during bootup. It can then be used to first boot up the initramfs image from a TFTP server (here with the IP 192.168.1.21): setenv serverip 192.168.1.21 setenv ipaddr 192.168.1.1 tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr The actual sysupgrade image can then be transferred (on the LAN port) to the device via scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/ On the device, the sysupgrade must then be started using sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin Signed-off-by: Sven Eckelmann <sven@narfation.org> [rebase, add LED migration] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts16
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rw-r--r--target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration3
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ath79/image/generic.mk11
7 files changed, 35 insertions, 3 deletions
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
new file mode 100644
index 0000000000..0271db0802
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9558_openmesh_mr.dtsi"
+
+/ {
+ compatible = "openmesh,mr1750-v2", "qca,qca9558";
+ model = "OpenMesh MR1750 v2";
+};
+
+&led_wifi2g {
+ linux,default-trigger = "phy1tpt";
+};
+
+&led_wifi5g {
+ linux,default-trigger = "phy0tpt";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2cdad7dd77..c6ade98c8f 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -160,7 +160,8 @@ engenius,eap300-v2|\
enterasys,ws-ap3705i|\
openmesh,mr900-v1|\
openmesh,mr900-v2|\
-openmesh,mr1750-v1)
+openmesh,mr1750-v1|\
+openmesh,mr1750-v2)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
;;
compex,wpj344-16m|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index ef6b70c902..0c08871f99 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -51,6 +51,7 @@ ath79_setup_interfaces()
openmesh,mr900-v1|\
openmesh,mr900-v2|\
openmesh,mr1750-v1|\
+ openmesh,mr1750-v2|\
pcs,cap324|\
pisen,ts-d084|\
pisen,wmb001n|\
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index d1a4767648..84323046f6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -96,7 +96,8 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x844
ath10k_patch_mac $(mtd_get_mac_binary art 0xc)
;;
- openmesh,mr1750-v1)
+ openmesh,mr1750-v1|\
+ openmesh,mr1750-v2)
caldata_extract "ART" 0x5000 0x844
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
;;
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
index 1d8909f688..ea5cafa66b 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration
@@ -25,7 +25,8 @@ openmesh,mr600-v2)
;;
openmesh,mr900-v1|\
openmesh,mr900-v2|\
-openmesh,mr1750-v1)
+openmesh,mr1750-v1|\
+openmesh,mr1750-v2)
migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g" ":wan=:lan"
;;
pcs,cap324)
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 01a9f61943..575761d079 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -55,6 +55,7 @@ platform_do_upgrade() {
openmesh,mr900-v1|\
openmesh,mr900-v2|\
openmesh,mr1750-v1|\
+ openmesh,mr1750-v2|\
openmesh,om2p-v2|\
openmesh,om2p-v4|\
openmesh,om2p-hs-v1|\
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 92e9458b37..3b5cb6bdfa 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1601,6 +1601,17 @@ define Device/openmesh_mr1750-v1
endef
TARGET_DEVICES += openmesh_mr1750-v1
+define Device/openmesh_mr1750-v2
+ $(Device/openmesh_common_64k)
+ SOC := qca9558
+ DEVICE_MODEL := MR1750
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ OPENMESH_CE_TYPE := MR1750
+ SUPPORTED_DEVICES += mr1750v2
+endef
+TARGET_DEVICES += openmesh_mr1750-v2
+
define Device/openmesh_om2p-v2
$(Device/openmesh_common_256k)
SOC := ar9330