aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2009-02-22 18:45:39 +0000
committerFelix Fietkau <nbd@openwrt.org>2009-02-22 18:45:39 +0000
commitf5fba5bc3ccf493289396deaa64a7ce7385d8590 (patch)
treeb02bca862b0f7cc4ae3ae90164ce74718e68ee3e /target/linux
parent610e45ae5c6ce47452cee2d7bd13900f7ce4f6d1 (diff)
downloadupstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.tar.gz
upstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.tar.bz2
upstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.zip
Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one 5354 Broadcom chip that's also in the WL-520gU, so I assume USB support can be soldered on. I've yet to open up the device, though. Initial flashing is done through the CFE failsafe mode like on other Asus devices, where you boot holding the reset button, the power LED flashes, and you tftp an image. Signed-off-by: David Cooper <dave@kupesoft.com> SVN-Revision: 14624
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/brcm-2.4/base-files/etc/init.d/netconfig36
1 files changed, 25 insertions, 11 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 44e2de25c9..a53209e06a 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -57,6 +57,12 @@ start() {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth1"
}
+ if (model == "ASUS WL-330gE") {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth0"
+ c["vlan0ports"] = ""
+ c["vlan1ports"] = ""
+ }
if (model == "ASUS WL-500g") {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
@@ -149,12 +155,14 @@ start() {
c["vlan1ports"] = ""
}
- print "#### VLAN configuration "
- print "config switch eth0"
- p("vlan0", "vlan0ports")
- p("vlan1", "vlan1ports")
- print ""
- print ""
+ if (c["vlan0ports"] || c["vlan1ports"]) {
+ print "#### VLAN configuration "
+ print "config switch eth0"
+ p("vlan0", "vlan0ports")
+ p("vlan1", "vlan1ports")
+ print ""
+ print ""
+ }
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
@@ -173,10 +181,16 @@ start() {
print " option netmask 255.255.255.0"
print ""
print ""
- print "#### WAN configuration"
- print "config interface wan"
- p("ifname", "wan_ifname")
- p("macaddr", "wan_macaddr")
- print " option proto dhcp"
+ if (c["wan_ifname"]) {
+ print "#### WAN configuration"
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ p("macaddr", "wan_macaddr")
+ print " option proto dhcp"
+ } else {
+ print "#### WAN configuration (disabled)"
+ print "#config interface wan"
+ print "# option proto dhcp"
+ }
}' > /etc/config/network
}