aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2020-06-18 08:25:43 -0500
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-20 13:03:39 +0200
commitd93da0d0169b2ca90b888e4bb782c259e5ddf2fe (patch)
tree854c8f38f87bc75f11366e2908b7395048201e4f /target/linux
parent9a477b833ab2aea96b9eee55acb5f9e7b01b36d8 (diff)
downloadupstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.tar.gz
upstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.tar.bz2
upstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.zip
ath79: add support for TP-Link CPE610 v2
TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts34
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk10
4 files changed, 48 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
new file mode 100644
index 0000000000..c00f21a51e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpe.dtsi"
+
+/ {
+ model = "TP-Link CPE610 v2";
+ compatible = "tplink,cpe610-v2", "qca,ar9344";
+
+ aliases {
+ led-boot = &led_lan;
+ led-failsafe = &led_lan;
+ led-upgrade = &led_lan;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_lan: lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "tp-link:green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
+
+&eth1 {
+ compatible = "syscon", "simple-mfd";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 8029cf7b5e..be0c3b1217 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -243,6 +243,9 @@ tplink,cpe510-v3)
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
;;
tplink,cpe610-v1|\
+tplink,cpe610-v2)
+ ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
+ ;;
tplink,tl-wr902ac-v1)
ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index f2ba49764b..02245031fa 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -39,6 +39,7 @@ ath79_setup_interfaces()
tplink,cpe510-v2|\
tplink,cpe510-v3|\
tplink,cpe610-v1|\
+ tplink,cpe610-v2|\
tplink,re350k-v1|\
tplink,re355-v1|\
tplink,re450-v1|\
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index bd7eb3fc76..967eb2a7c3 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -352,6 +352,16 @@ define Device/tplink_cpe610-v1
endef
TARGET_DEVICES += tplink_cpe610-v1
+define Device/tplink_cpe610-v2
+ $(Device/tplink-safeloader-okli)
+ SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := CPE610
+ DEVICE_VARIANT := v2
+ TPLINK_BOARD_ID := CPE610V2
+endef
+TARGET_DEVICES += tplink_cpe610-v2
+
define Device/tplink_re350k-v1
$(Device/tplink-safeloader)
SOC := qca9558