aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorDaniel González Cabanelas <dgcbueu@gmail.com>2023-06-18 21:34:59 +0200
committerÁlvaro Fernández Rojas <noltari@gmail.com>2023-06-19 20:42:44 +0200
commitac6832110ac4a6c6f2c4a789d2ab6fa4075a6bfc (patch)
tree80b3f35c638f9b32f514d76cfcdd77f88ebda568 /target/linux
parent43746c4c5a85e1762edf383909f1734ad0543825 (diff)
downloadupstream-ac6832110ac4a6c6f2c4a789d2ab6fa4075a6bfc.tar.gz
upstream-ac6832110ac4a6c6f2c4a789d2ab6fa4075a6bfc.tar.bz2
upstream-ac6832110ac4a6c6f2c4a789d2ab6fa4075a6bfc.zip
bmips: add support for NuCom R5010UNv2
The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6cb3328b4fd4939f3800d4be9d52744b753de1b6)
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds1
-rw-r--r--target/linux/bmips/bcm6328/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc3
-rw-r--r--target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts216
-rw-r--r--target/linux/bmips/image/bcm6328.mk13
5 files changed, 234 insertions, 2 deletions
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
index 5ece1f7ba1..5e80eb34e7 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
+++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
@@ -6,6 +6,7 @@
board_config_update
case "$(board_name)" in
+nucom,r5010unv2 |\
sercomm,ad1018)
ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
;;
diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
index 66f9282e48..bfedad9e45 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
+++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
@@ -6,7 +6,8 @@ board_config_update
case "$(board_name)" in
comtrend,ar-5381u |\
-comtrend,ar-5387un)
+comtrend,ar-5387un |\
+nucom,r5010unv2)
ucidef_set_bridge_device switch
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
diff --git a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
index 21f18b4b81..2056ea017f 100644
--- a/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
@@ -4,7 +4,8 @@
case "$(board_name)" in
comtrend,ar-5381u |\
-comtrend,ar-5387un)
+comtrend,ar-5387un |\
+nucom,r5010unv2)
mtd fixtrx firmware
;;
esac
diff --git a/target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts b/target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts
new file mode 100644
index 0000000000..826b2a61e2
--- /dev/null
+++ b/target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+ model = "NuCom R5010UNv2";
+ compatible = "nucom,r5010unv2", "brcm,bcm6328";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+ };
+
+ bcm43217-sprom {
+ compatible = "brcm,bcma-sprom";
+
+ pci-bus = <1>;
+ pci-dev = <0>;
+
+ nvmem-cells = <&macaddr_cfe_6a0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ brcm,sprom = "brcm/bcm43217-sprom.bin";
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ethernet {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_cfe_6a0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <16666667>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cfe: partition@0 {
+ label = "cfe";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ partition@10000 {
+ compatible = "brcm,bcm963xx-imagetag";
+ label = "firmware";
+ reg = <0x010000 0xfe0000>;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+ &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
+ &pinctrl_leds>;
+
+ led@1 {
+ reg = <1>;
+ active-low;
+ label = "green:internet";
+ };
+
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "red:internet";
+ };
+
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "green:dsl";
+ };
+
+ led_power_green: led@4 {
+ reg = <4>;
+ active-low;
+ label = "green:power";
+ };
+
+ led_power_red: led@5 {
+ reg = <5>;
+ active-low;
+ label = "red:power";
+ panic-indicator;
+ };
+
+ led@10 {
+ reg = <10>;
+ active-low;
+ label = "green:wps";
+ };
+
+ led@11 {
+ reg = <11>;
+ active-low;
+ label = "green:usb";
+ };
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio10",
+ "gpio11";
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+
+ phy-handle = <&phy2>;
+ phy-mode = "mii";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+
+ phy-handle = <&phy3>;
+ phy-mode = "mii";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+
+ phy-handle = <&phy4>;
+ phy-mode = "mii";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usbh {
+ status = "okay";
+};
+
+&cfe {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_cfe_6a0: macaddr@6a0 {
+ reg = <0x6a0 0x6>;
+ };
+};
diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk
index ef74410f1e..8023ef8fa1 100644
--- a/target/linux/bmips/image/bcm6328.mk
+++ b/target/linux/bmips/image/bcm6328.mk
@@ -26,6 +26,19 @@ define Device/comtrend_ar-5387un
endef
TARGET_DEVICES += comtrend_ar-5387un
+define Device/nucom_r5010unv2
+ $(Device/bcm63xx-cfe)
+ DEVICE_VENDOR := NuCom
+ DEVICE_MODEL := R5010UNv2
+ CHIP_ID := 6328
+ CFE_BOARD_ID := 96328ang
+ FLASH_MB := 16
+ DEVICE_PACKAGES += $(USB2_PACKAGES) \
+ $(B43_PACKAGES) broadcom-43217-sprom \
+ kmod-leds-bcm6328
+endef
+TARGET_DEVICES += nucom_r5010unv2
+
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm