aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorEike Feldmann <eike.feldmann@outlook.com>2019-02-26 23:04:53 +0100
committerPetr Štetiar <ynezz@true.cz>2019-04-14 23:42:03 +0200
commit9e0fb5a27ff53214734a0d8776161342cf7359e8 (patch)
tree8a06c920108faba27611906e11171e84d68b5c9a /target/linux
parent43e8c37cb4da64a12a3cb88a84b19db7f2fc640c (diff)
downloadupstream-9e0fb5a27ff53214734a0d8776161342cf7359e8.tar.gz
upstream-9e0fb5a27ff53214734a0d8776161342cf7359e8.tar.bz2
upstream-9e0fb5a27ff53214734a0d8776161342cf7359e8.zip
ramips: add support for Rakwireless RAK633
It's OEM module with 2*26 pin header, similar to LinkIt Smart 7688 or Vocore2. Specification: CPU: MT7628 580 MHz. MIPS 24K RAM: 64 MB Flash: 8 MB WIFI: 802.11n/g/b 20/40 MHz USB: 1x Port USB 2.0 Ethernet: 5 Port ethernet switch UART: 2x Installation: Use the installed uboot Bootloader. Connect a serial cable to serialport 0. Turn power on. Choose the option: "Load system code then write to Flash via TFTP". Choose the local device IP and the TFTP server IP and the file name of the system image. After if the Bootloader will copy the image to the local flash. Notes: The I2C Kernel module work not correctly. You can send and receive data. But the command i2cdetect doesn’t work. FS#845 Signed-off-by: Eike Feldmann <eike.feldmann@outlook.com> [commit subject and message touches, DTS whitespace fixes, wifi LED rename, pinctrl fixes, network settings fixes, lan/wmac mac addresses, removed i2c kernel modules] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/dts/RAK633.dts104
-rw-r--r--target/linux/ramips/image/mt76x8.mk7
4 files changed, 115 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index e05260f35a..fa20ab0714 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -283,6 +283,9 @@ netgear,r6350)
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
set_wifi_led "$boardname:green:wifi"
;;
+rakwireless,rak633)
+ set_wifi_led "$boardname:blue:wifi"
+ ;;
re350-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 89cdf57b3e..c2646876a2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -193,6 +193,7 @@ ramips_setup_interfaces()
;;
ar670w|\
ar725w|\
+ rakwireless,rak633|\
rt-ac51u)
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
diff --git a/target/linux/ramips/dts/RAK633.dts b/target/linux/ramips/dts/RAK633.dts
new file mode 100644
index 0000000000..ac7218510f
--- /dev/null
+++ b/target/linux/ramips/dts/RAK633.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
+ model = "Rakwireless RAK633";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "rak633:blue:wifi";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ wled_an {
+ ralink,group = "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&i2s {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&gdma {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x4>;
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 02b03e5007..571ddf3d51 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -164,6 +164,13 @@ define Device/pbr-d1
endef
TARGET_DEVICES += pbr-d1
+define Device/rakwireless_rak633
+ DTS := RAK633
+ DEVICE_TITLE := Rakwireless RAK633
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += rakwireless_rak633
+
define Device/skylab_skw92a
DTS := SKW92A
IMAGE_SIZE := 16064k