aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-27 14:46:25 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-03-05 12:53:35 +0100
commit938bc57a45a7f76597c8a38d3dbe930414b10aab (patch)
treeaf69036404766529788185fabc59b733a3fb2d9c /target/linux
parent6b7a525a725a78ff961d91a76e4ea9fbb7066178 (diff)
downloadupstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.tar.gz
upstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.tar.bz2
upstream-938bc57a45a7f76597c8a38d3dbe930414b10aab.zip
ramips: fix and tidy up DTS for D-Link DIR-810L
This patch addresses several issues for D-Link DIR-810L: - add correct button codes - harmonize button node names - use generic flash@0 - remove unused pin groups from state_default - improve sorting of properties Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts18
1 files changed, 10 insertions, 8 deletions
diff --git a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
index 0b1ca26ba4..514e9cc354 100644
--- a/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
+++ b/target/linux/ramips/dts/mt7620a_dlink_dir-810l.dts
@@ -23,20 +23,20 @@
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
+ linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
+ linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
- led_power_green: power {
+ led_power_green: power_green {
label = "dir-810l:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
@@ -46,7 +46,7 @@
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
- power2 {
+ power_orange {
label = "dir-810l:orange:power";
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
@@ -56,7 +56,7 @@
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -119,7 +119,7 @@
&state_default {
gpio {
- ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
+ ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
@@ -130,9 +130,10 @@
};
&gsw {
- mediatek,port4 = "ephy";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
+
+ mediatek,port4 = "ephy";
};
&pcie {
@@ -140,9 +141,10 @@
};
&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
pinctrl-names = "default";
pinctrl-0 = <&pa_pins>;
+
+ ralink,mtd-eeprom = <&factory 0x0>;
mtd-mac-address = <&factory 0x28>;
};