lantiq: use the device tree bindings from rt2x00 driver

Set a device specific wireless mac address for ARV7506PW11, VGV7519 and
VGV7510KW22. The one from the EEPROM is a generic one and the same on
all boards.

Use the wifi@0,0 label and the pci0,0 compatible string for the
ARV7519PW and ARV7525PW since the pci vendor and device id is unknown.
It should work anyway since the compatible string isn't evaluated
(yet).

Signed-off-by: Mathias Kresin <dev@kresin.me>

11 files changed, 136 insertions, 170 deletions

diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644
index 3aa5de4d609..00000000000
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/bin/sh
-# based on gabors ralink wisoc implementation
-
-rt2x00_eeprom_die() {
-	echo "rt2x00 eeprom: " "$*"
-	exit 1
-}
-
-rt2x00_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local count=$3
-	local swab=$4
-	local mtd
-
-	. /lib/functions.sh
-
-	mtd=$(find_mtd_part $part)
-	[ -n "$mtd" ] || \
-		rt2x00_eeprom_die "no mtd device found for partition $part"
-
-	if [ $swab -gt 0 ]; then
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=2 skip=$offset count=$count conv=swab || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	else
-		dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count || \
-			rt2x00_eeprom_die "failed to extract from $mtd"
-	fi
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions/lantiq.sh
-
-case "$FIRMWARE" in
-"RT2860.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	ARV7506PW11|ARV7510PW22|ARV7519PW|ARV752DPW|ARV752DPW22|VGV7519)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	ARV7525PW)
-		rt2x00_eeprom_extract "board_config" 1040 512 0
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"RT3062.eeprom" )
-	board=$(lantiq_board_name)
-	case $board in
-	VGV7510KW22)
-		rt2x00_eeprom_extract "board_config" 520 256 1
-		;;
-	*)
-		rt2x00_eeprom_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac
diff --git a/target/linux/lantiq/dts/ARV7506PW11.dts b/target/linux/lantiq/dts/ARV7506PW11.dts
index 676c0b898b2..5c8b0fe3a37 100644
--- a/target/linux/lantiq/dts/ARV7506PW11.dts
+++ b/target/linux/lantiq/dts/ARV7506PW11.dts
@@ -80,17 +80,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -152,3 +141,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7510PW22.dts b/target/linux/lantiq/dts/ARV7510PW22.dts
index f288511c7ce..079c8563082 100644
--- a/target/linux/lantiq/dts/ARV7510PW22.dts
+++ b/target/linux/lantiq/dts/ARV7510PW22.dts
@@ -121,24 +121,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -189,3 +171,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7519PW.dts b/target/linux/lantiq/dts/ARV7519PW.dts
index 9c29c8c9c93..1fa52c3d905 100644
--- a/target/linux/lantiq/dts/ARV7519PW.dts
+++ b/target/linux/lantiq/dts/ARV7519PW.dts
@@ -113,18 +113,6 @@
 		ifxhcd@E101000 {
 			status = "okay";
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0xf>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -222,3 +210,17 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0xf>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV7525PW.dts b/target/linux/lantiq/dts/ARV7525PW.dts
index aeba079a48d..f259c17d264 100644
--- a/target/linux/lantiq/dts/ARV7525PW.dts
+++ b/target/linux/lantiq/dts/ARV7525PW.dts
@@ -68,12 +68,6 @@
 					};
 				};
 			};
-
-			ralink_eep {
-				compatible = "ralink,eeprom";
-				ralink,eeprom = "RT2860.eeprom";
-				reg = <0 0x3f0410 0x110>;
-			};
 		};
 
 		gpio: pinmux@E100B10 {
@@ -96,11 +90,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
-		};
 	};
 
 	gpio-keys-polled {
@@ -150,3 +139,14 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
+
+	wifi@0,0 {
+		compatible = "pci0,0";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW.dts b/target/linux/lantiq/dts/ARV752DPW.dts
index d6de881faeb..d51a70a593e 100644
--- a/target/linux/lantiq/dts/ARV752DPW.dts
+++ b/target/linux/lantiq/dts/ARV752DPW.dts
@@ -135,19 +135,6 @@
 			phy-mode = "rmii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			interrupt-map = <0x7000 0 0 1 &icu0 135>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -231,3 +218,18 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	interrupt-map = <0x7000 0 0 1 &icu0 135>;
+	req-mask = <0x3>;
+
+	wifi@1814,0601 {
+		compatible = "pci1814,0601";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/ARV752DPW22.dts b/target/linux/lantiq/dts/ARV752DPW22.dts
index 0b0fddbd827..7343a5d2ffb 100644
--- a/target/linux/lantiq/dts/ARV752DPW22.dts
+++ b/target/linux/lantiq/dts/ARV752DPW22.dts
@@ -134,24 +134,6 @@
 			phy-mode = "mii";
 			mtd-mac-address = <&boardconfig 0x16>;
 		};
-
-		pci@E105400 {
-			status = "okay";
-			lantiq,external-clock;
-			interrupt-map = <
-				0x7000 0 0 1 &icu0 30
-				0x7800 0 0 1 &icu0 135
-				0x7800 0 0 2 &icu0 135
-				0x7800 0 0 3 &icu0 135
-			>;
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-			req-mask = <0x3>;
-		};
-	};
-
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
 	};
 
 	gpio-keys-polled {
@@ -251,3 +233,23 @@
 		};
 	};
 };
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF1.dts b/target/linux/lantiq/dts/P2812HNUF1.dts
index 53ffbdd56c7..b1d9eedb35d 100644
--- a/target/linux/lantiq/dts/P2812HNUF1.dts
+++ b/target/linux/lantiq/dts/P2812HNUF1.dts
@@ -50,11 +50,6 @@
 		};
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-leds {
 		usb1: usb1 {
 			label = "p2812hnuf1:green:usb1";
@@ -66,3 +61,11 @@
 		};
 	};
 };
+
+&pci0 {
+	wifi@1814,3062 {
+		compatible = "pci1814,3062";
+		reg = <0x7000 0 0 0 0>;
+		ralink,eeprom = "RT3062.eeprom";
+	};
+};
diff --git a/target/linux/lantiq/dts/P2812HNUF3.dts b/target/linux/lantiq/dts/P2812HNUF3.dts
index 54795a334dd..366d0346700 100644
--- a/target/linux/lantiq/dts/P2812HNUF3.dts
+++ b/target/linux/lantiq/dts/P2812HNUF3.dts
@@ -54,9 +54,12 @@
 			};
 		};
 	};
+};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
+&pci0 {
+	wifi@1814,3092 {
+		compatible = "pci1814,3092";
+		reg = <0x7000 0 0 0 0>;
 		ralink,eeprom = "RT3092.eeprom";
 	};
 };
diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi
index 8af1db70c3e..5ca2844d08a 100644
--- a/target/linux/lantiq/dts/VGV7510KW22.dtsi
+++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi
@@ -75,11 +75,6 @@
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -92,11 +87,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT3062.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -167,6 +157,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";
diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index a2242bb54df..a7b421fff93 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -102,11 +102,6 @@
 			gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 		};
 
-		pci@E105400 {
-			status = "okay";
-			gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-		};
-
 		pcie@d900000 {
 			status = "disabled";
 		};
@@ -119,11 +114,6 @@
 		phys = [ 00 01 ];
 	};
 
-	ralink_eep {
-		compatible = "ralink,eeprom";
-		ralink,eeprom = "RT2860.eeprom";
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -214,6 +204,20 @@
 	};
 };
 
+&pci0 {
+	status = "okay";
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+
+	wifi@1814,3091 {
+		compatible = "pci1814,3091";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+		mtd-mac-address = <&boardconfig 0x16>;
+		mtd-mac-address-increment = <1>;
+	};
+};
+
 &eth0 {
 	lan: interface@0 {
 		compatible = "lantiq,xrx200-pdi";