qualcommax: switch to qca8081 upstream PHY driver

Switch to qca8081 upstream PHY. Update every device that have LEDs
attached to the qca8081 PHY to follow new way of defining the LEDs and
add original OEM configuration.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

5 files changed, 68 insertions, 0 deletions

diff --git a/target/linux/qualcommax/config-6.1 b/target/linux/qualcommax/config-6.1
index 7a983b961b3..ad08d05f70c 100644
--- a/target/linux/qualcommax/config-6.1
+++ b/target/linux/qualcommax/config-6.1
@@ -55,6 +55,7 @@ CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_QCOM_CPUFREQ_HW is not set
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
+CONFIG_AT803X_PHY=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_SD=y
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
index 73bc13cf320..bb4634d054b 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax880.dts
@@ -8,6 +8,7 @@
 #include "ipq8074-ess.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Yuncore AX880";
@@ -313,12 +314,36 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 
 	qca8081_28: ethernet-phy@28 {
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
index 0df16e9ad7d..0408c6ed859 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-ax9000.dts
@@ -378,6 +378,18 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <24>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
index a4548a77831..4519a7a6bf4 100644
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
@@ -163,6 +163,25 @@
 		compatible = "ethernet-phy-id004d.d101";
 		reg = <28>;
 		reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_YELLOW>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
diff --git a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
index 5e478d75eec..f3e67311c3a 100644
--- a/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
@@ -10,6 +10,10 @@ arcadyan,aw1000)
 	ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
 	ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
 	;;
+dynalink,dl-wrx36)
+	ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"
+	ucidef_set_led_netdev "wan-port-link-yellow" "WAN-PORT-LINK-YELLOW" "90000.mdio-1:1c:yellow:wan" "wan" "tx rx link_10 link_100 link_1000"
+	;;
 edgecore,eap102)
 	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
 	;;
@@ -32,6 +36,9 @@ redmi,ax6|\
 xiaomi,ax3600)
 	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
 	;;
+xiaomi,ax9000)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 qnap,301w)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
@@ -40,6 +47,10 @@ qnap,301w)
 	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
 	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
 	;;
+yuncore,ax880)
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:18:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
+	ucidef_set_led_netdev "lan-port-link" "LAN-PORT-LINK" "90000.mdio-1:1c:green:lan" "lan" "tx rx link_10 link_100 link_1000 link_2500"
+	;;
 esac
 
 board_config_flush