diff options
author | Piotr Dymacz <pepe2k@gmail.com> | 2016-11-14 17:38:23 +0100 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2016-11-21 10:05:40 +0100 |
commit | 16afa08d19b4f7bf256a89749e76ff8421ece013 (patch) | |
tree | d0958d7a8361aa2a5a8fec5ba0dd320776a3ff88 /target/linux/xburst/config-3.18 | |
parent | 31952dbd1c40a2cd015ef435bd64fa9b2bb87eec (diff) | |
download | upstream-16afa08d19b4f7bf256a89749e76ff8421ece013.tar.gz upstream-16afa08d19b4f7bf256a89749e76ff8421ece013.tar.bz2 upstream-16afa08d19b4f7bf256a89749e76ff8421ece013.zip |
ar71xx: add support for COMFAST CF-E380AC v1 and v2
COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE
support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035.
There are two versions of this model, with different RAM
and U-Boot mtd partition sizes:
- v1: 128 MB of RAM, 128 KB U-Boot image size
- v2: 256 MB of RAM, 256 KB U-Boot image size
Version number is available only inside vendor GUI,
hardware and markings are the same.
Short specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 1x 10/100/1000 Mbps Ethernet, with PoE support
- 128 or 256 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm
- 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm
- 6x internal antennas
- 1x RGB LED, 1x button
- UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB
- external watchdog (Pericon Technology PT7A7514)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/xburst/config-3.18')
0 files changed, 0 insertions, 0 deletions