remove target

This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34430

1 files changed, 0 insertions, 372 deletions

diff --git a/target/linux/ubicom32/files/drivers/video/backlight/ubicom32lcd.c b/target/linux/ubicom32/files/drivers/video/backlight/ubicom32lcd.c
deleted file mode 100644
index e4f8c713e0..0000000000
--- a/target/linux/ubicom32/files/drivers/video/backlight/ubicom32lcd.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * drivers/video/ubicom32lcd.c
- *	LCD initilization code
- *
- * (C) Copyright 2009, Ubicom, Inc.
- *
- * This file is part of the Ubicom32 Linux Kernel Port.
- *
- * The Ubicom32 Linux Kernel Port is free software: you can redistribute
- * it and/or modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, either version 2 of the
- * License, or (at your option) any later version.
- *
- * The Ubicom32 Linux Kernel Port is distributed in the hope that it
- * will be useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Ubicom32 Linux Kernel Port.  If not,
- * see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/ip5000.h>
-#include <asm/gpio.h>
-#include <asm/ubicom32lcd.h>
-
-#include "ubicom32lcd.h"
-
-#define DRIVER_NAME			"ubicom32lcd"
-
-struct ubicom32lcd_data {
-	const struct ubicom32lcd_panel	*panel;
-
-	int				pin_cs;
-	int				pin_rd;
-	int				pin_rs;
-	int				pin_wr;
-	int				pin_reset;
-	struct ubicom32_io_port		*port_data;
-	int				data_shift;
-};
-
-/*
- * ubicom32lcd_write
- *	Performs a write cycle on the bus (assumes CS asserted, RD & WR set)
- */
-static void ubicom32lcd_write(struct ubicom32lcd_data *ud, int command, u16 data)
-{
-	if (command) {
-		UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rs);
-	} else {
-		UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-	}
-
-	asm volatile (
-		"or.4	4(%[port]), 4(%[port]), %[mask]	\n\t"
-		"not.4	%[mask], %[mask]		\n\t"
-		"and.4	8(%[port]), 8(%[port]), %[mask]	\n\t"
-		"or.4	8(%[port]), 8(%[port]), %[cmd]	\n\t"
-		:
-		: [port] "a" (ud->port_data),
-		  [mask] "d" (0xFFFF << ud->data_shift),
-		  [cmd] "d" (data << ud->data_shift)
-		: "cc"
-	);
-
-	UBICOM32_GPIO_SET_PIN_LOW(ud->pin_wr);
-
-	//ndelay(50);
-	udelay(1);
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-
-	udelay(1);
-	//ndelay(50);
-}
-
-/*
- * ubicom32lcd_read_data
- *	Performs a read cycle on the bus (assumes CS asserted, RD & WR set)
- */
-static u16 ubicom32lcd_read_data(struct ubicom32lcd_data *ud)
-{
-	u32_t data;
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-
-	asm volatile (
-		"and.4	4(%[port]), 4(%[port]), %[mask]\n\t"
-		:
-		: [port] "a" (ud->port_data),
-		  [mask] "d" (~(0xFFFF << ud->data_shift))
-		: "cc"
-	);
-
-	UBICOM32_GPIO_SET_PIN_LOW(ud->pin_rd);
-
-	ndelay(300);
-
-	asm volatile (
-		"lsr.4	%[data], 12(%[port]), %[shamt]	\n\t"
-		"and.4	%[data], %[data], %[mask]	\n\t"
-		: [data] "=d" (data)
-		: [port] "a" (ud->port_data),
-		  [mask] "d" (0xFFFF),
-		  [shamt] "d" (ud->data_shift)
-		: "cc"
-	);
-
-	ndelay(200);
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-
-	ndelay(500);
-
-	return data;
-}
-
-/*
- * ubicom32lcd_execute
- *	Executes a script for performing operations on the LCD (assumes CS set)
- */
-static void ubicom32lcd_execute(struct ubicom32lcd_data *ud, const struct ubicom32lcd_step *script)
-{
-	while (1) {
-		switch (script->op) {
-		case LCD_STEP_CMD:
-			ubicom32lcd_write(ud, 1, script->cmd);
-			break;
-
-		case LCD_STEP_DATA:
-			ubicom32lcd_write(ud, 0, script->data);
-			break;
-
-		case LCD_STEP_CMD_DATA:
-			ubicom32lcd_write(ud, 1, script->cmd);
-			ubicom32lcd_write(ud, 0, script->data);
-			break;
-
-		case LCD_STEP_SLEEP:
-			udelay(script->data);
-			break;
-
-		case LCD_STEP_DONE:
-			return;
-		}
-		script++;
-	}
-}
-
-/*
- * ubicom32lcd_goto
- *	Places the gram pointer at a specific X, Y address
- */
-static void ubicom32lcd_goto(struct ubicom32lcd_data *ud, int x, int y)
-{
-	ubicom32lcd_write(ud, 1, ud->panel->horz_reg);
-	ubicom32lcd_write(ud, 0, x);
-	ubicom32lcd_write(ud, 1, ud->panel->vert_reg);
-	ubicom32lcd_write(ud, 0, y);
-	ubicom32lcd_write(ud, 1, ud->panel->gram_reg);
-}
-
-/*
- * ubicom32lcd_panel_init
- *	Initializes the lcd panel.
- */
-static int ubicom32lcd_panel_init(struct ubicom32lcd_data *ud)
-{
-	u16 id;
-
-	UBICOM32_GPIO_SET_PIN_LOW(ud->pin_reset);
-	UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_reset);
-	UBICOM32_GPIO_ENABLE(ud->pin_reset);
-
-	asm volatile (
-		"or.4	0x50(%[port]), 0x50(%[port]), %[mask]	\n\t"
-		"not.4	%[mask], %[mask]			\n\t"
-		"and.4	0x04(%[port]), 0x04(%[port]), %[mask]	\n\t"
-		:
-		: [port] "a" (ud->port_data),
-		  [mask] "d" (0xFFFF << ud->data_shift)
-		: "cc"
-	);
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-
-	UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rs);
-	UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_rd);
-	UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_wr);
-	UBICOM32_GPIO_SET_PIN_OUTPUT(ud->pin_cs);
-
-	UBICOM32_GPIO_ENABLE(ud->pin_rs);
-	UBICOM32_GPIO_ENABLE(ud->pin_rd);
-	UBICOM32_GPIO_ENABLE(ud->pin_wr);
-	UBICOM32_GPIO_ENABLE(ud->pin_cs);
-
-	udelay(20);
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_reset);
-
-	udelay(20);
-
-	UBICOM32_GPIO_SET_PIN_LOW(ud->pin_cs);
-
-	id = ubicom32lcd_read_data(ud);
-
-	/*
-	 * We will try to figure out what kind of panel we have if we were not told.
-	 */
-	if (!ud->panel) {
-		const struct ubicom32lcd_panel **p = ubicom32lcd_panels;
-		while (*p) {
-			if ((*p)->id && ((*p)->id == id)) {
-				break;
-			}
-			p++;
-		}
-		if (!*p) {
-			printk(KERN_WARNING DRIVER_NAME ":Could not find compatible panel, id=%x\n", id);
-			return -ENODEV;
-		}
-		ud->panel = *p;
-	}
-
-	/*
-	 * Make sure panel ID matches if we were supplied a panel type
-	 */
-	if (ud->panel->id && (ud->panel->id != id)) {
-		UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-
-		return -ENODEV;
-	}
-
-	ubicom32lcd_execute(ud, ud->panel->init_seq);
-
-	ubicom32lcd_goto(ud, 0, 0);
-
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_cs);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rd);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_wr);
-	UBICOM32_GPIO_SET_PIN_HIGH(ud->pin_rs);
-
-	printk(KERN_INFO DRIVER_NAME ": Initialized panel %s\n", ud->panel->desc);
-
-	return 0;
-}
-
-/*
- * ubicom32lcd_probe
- */
-static int ubicom32lcd_probe(struct platform_device *pdev)
-{
-	const struct ubicom32lcd_platform_data *pdata = pdev->dev.platform_data;
-	struct ubicom32lcd_data *ud;
-	int retval;
-
-	/*
-	 * Allocate our private data
-	 */
-	ud = kzalloc(sizeof(struct ubicom32lcd_data), GFP_KERNEL);
-	if (!ud) {
-		return -ENOMEM;
-	}
-
-	if (pdata) {
-		ud->pin_cs = pdata->pin_cs;
-		ud->pin_rd = pdata->pin_rd;
-		ud->pin_wr = pdata->pin_wr;
-		ud->pin_rs = pdata->pin_rs;
-		ud->pin_reset = pdata->pin_reset;
-		ud->port_data = pdata->port_data;
-		ud->data_shift = pdata->data_shift;
-	} else {
-		/*
-		 * Defaults
-		 */
-		ud->pin_cs = GPIO_RD_4;
-		ud->pin_rd = GPIO_RD_5;
-		ud->pin_rs = GPIO_RD_3;
-		ud->pin_wr = GPIO_RD_2;
-		ud->pin_reset = GPIO_RD_7;
-		ud->port_data = (struct ubicom32_io_port *)RI;
-		ud->data_shift = 0;
-	}
-
-	/*
-	 * Initialize the display
-	 */
-	retval = ubicom32lcd_panel_init(ud);
-	if (retval) {
-		kfree(ud);
-		return retval;
-	}
-
-	printk(KERN_INFO DRIVER_NAME ": LCD initialized\n");
-
-	return 0;
-}
-
-/*
- * ubicom32lcd_remove
- */
-static int __exit ubicom32lcd_remove(struct platform_device *pdev)
-{
-	struct ubicom32lcd_data *ud = platform_get_drvdata(pdev);
-
-	kfree(ud);
-
-	return 0;
-}
-
-static struct platform_driver ubicom32lcd_driver = {
-	.probe          = ubicom32lcd_probe,
-	.remove         = ubicom32lcd_remove,
-
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-	},
-
-	.remove = __exit_p(ubicom32lcd_remove),
-};
-
-static struct platform_device *ubicom32lcd_device;
-
-/*
- * ubicom32lcd_init
- */
-static int __init ubicom32lcd_init(void)
-{
-	int res;
-
-	res = platform_driver_register(&ubicom32lcd_driver);
-	if (res == 0) {
-		ubicom32lcd_device = platform_device_alloc(DRIVER_NAME, 0);
-		if (ubicom32lcd_device) {
-			res = platform_device_add(ubicom32lcd_device);
-		} else {
-			res = -ENOMEM;
-		}
-		if (res) {
-			platform_device_put(ubicom32lcd_device);
-			platform_driver_unregister(&ubicom32lcd_driver);
-		}
-	}
-	return res;
-}
-module_init(ubicom32lcd_init);
-
-/*
- * ubicom32lcd_exit
- */
-static void __exit ubicom32lcd_exit(void)
-{
-	platform_device_unregister(ubicom32lcd_device);
-	platform_driver_unregister(&ubicom32lcd_driver);
-}
-module_exit(ubicom32lcd_exit);
-
-MODULE_AUTHOR("Patrick Tjin <@ubicom.com>");
-MODULE_DESCRIPTION("Ubicom32 LCD driver");
-MODULE_LICENSE("GPL");