aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/tegra/patches-4.14
diff options
context:
space:
mode:
authorTomasz Maciej Nowak <tomek_n@o2.pl>2019-04-01 19:25:38 +0200
committerHauke Mehrtens <hauke@hauke-m.de>2019-04-06 14:48:46 +0200
commit42f96ed9413a3483b0448581374feeb3343f6f6a (patch)
tree64dcc9c3a418ecec29a6654d75746574e4c0902a /target/linux/tegra/patches-4.14
parentde3eb0d8a060b1eb4e4027ebc435bb412ce8e096 (diff)
downloadupstream-42f96ed9413a3483b0448581374feeb3343f6f6a.tar.gz
upstream-42f96ed9413a3483b0448581374feeb3343f6f6a.tar.bz2
upstream-42f96ed9413a3483b0448581374feeb3343f6f6a.zip
tegra: add new target
New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Diffstat (limited to 'target/linux/tegra/patches-4.14')
-rw-r--r--target/linux/tegra/patches-4.14/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch77
1 files changed, 77 insertions, 0 deletions
diff --git a/target/linux/tegra/patches-4.14/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch b/target/linux/tegra/patches-4.14/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
new file mode 100644
index 0000000000..cfbc5d9c4f
--- /dev/null
+++ b/target/linux/tegra/patches-4.14/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch
@@ -0,0 +1,77 @@
+From patchwork Fri Jul 13 11:32:42 2018
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
+ tegra2 silicon bug
+X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
+X-Patchwork-Id: 943440
+Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
+To: linux-tegra@vger.kernel.org
+Date: Fri, 13 Jul 2018 11:32:42 +0000
+From: "David R. Piegdon" <lkml@p23q.org>
+List-Id: <linux-tegra.vger.kernel.org>
+
+Hi,
+a while back I sent a few mails regarding spurious interrupts in the
+UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
+it instead of the hsuart driver. After going down a pretty deep
+debugging/testing hole, I think I found a patch that fixes the issue. So
+far testing in a reboot-cycle suggests that the error frequency dropped
+from >3% of all reboots to at least <0.05% of all reboots. Tests
+continue to run over the weekend.
+
+The patch below already is a second iteration; the first did not reset
+the MCR or contain the lines below '// clear interrupts'. This resulted
+in no more spurious interrupts, but in a few % of spurious interrupts
+that were recovered the UART block did not receive any characters any
+more. So further resetting was required to fully reacquire operational
+state of the UART block.
+
+I'd love any comments/suggestions on this!
+
+Cheers,
+
+David
+
+--- a/drivers/tty/serial/8250/8250_core.c
++++ b/drivers/tty/serial/8250/8250_core.c
+@@ -140,6 +140,38 @@ static irqreturn_t serial8250_interrupt(
+ "serial8250: too much work for irq%d\n", irq);
+ break;
+ }
++
++#ifdef CONFIG_ARCH_TEGRA_2x_SOC
++ if (!handled && (port->type == PORT_TEGRA)) {
++ /*
++ * Fix Tegra 2 CPU silicon bug where sometimes
++ * "TX holding register empty" interrupts result in a
++ * bad (metastable?) state in Tegras HSUART IP core.
++ * Only way to recover seems to be to reset all
++ * interrupts as well as the TX queue and the MCR.
++ * But we don't want to loose any outgoing characters,
++ * so only do it if the RX and TX queues are empty.
++ */
++ unsigned char lsr = port->serial_in(port, UART_LSR);
++ const unsigned char fifo_empty_mask =
++ (UART_LSR_TEMT | UART_LSR_THRE);
++ if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
++ fifo_empty_mask)) {
++ port->serial_out(port, UART_IER, 0);
++ port->serial_out(port, UART_MCR, 0);
++ serial8250_clear_and_reinit_fifos(up);
++ port->serial_out(port, UART_MCR, up->mcr);
++ port->serial_out(port, UART_IER, up->ier);
++ // clear interrupts
++ serial_port_in(port, UART_LSR);
++ serial_port_in(port, UART_RX);
++ serial_port_in(port, UART_IIR);
++ serial_port_in(port, UART_MSR);
++ up->lsr_saved_flags = 0;
++ up->msr_saved_flags = 0;
++ }
++ }
++#endif
+ } while (l != end);
+
+ spin_unlock(&i->lock);