[s3c24xx] bump to 2.6.30-rc6

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15918 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 1718 insertions, 0 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
new file mode 100644
index 0000000000..3ae2a81238
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
@@ -0,0 +1,1718 @@
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/glamo.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/mmc/host.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/lis302dl.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+#include <mach/mci.h>
+#include <mach/ts.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/spi-gpio.h>
+#include <plat/pwm.h>
+#include <mach/cpu.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
+#include <plat/usb-control.h>
+#include <plat/regs-timer.h>
+
+#include <mach/gta02-pm-gsm.h>
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+#include <linux/jbt6k74.h>
+#include <linux/glamofb.h>
+
+#include <linux/hdq.h>
+#include <linux/bq27000_battery.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+#include <linux/touchscreen/ts_filter_linear.h>
+#include <linux/touchscreen/ts_filter_mean.h>
+#include <linux/touchscreen/ts_filter_median.h>
+#include <linux/touchscreen/ts_filter_group.h>
+#endif
+
+#include <asm/fiq.h>
+
+#include <linux/gta02-vibrator.h>
+#include <linux/gta02-shadow.h>
+
+/* arbitrates which sensor IRQ owns the shared SPI bus */
+static spinlock_t motion_irq_lock;
+
+
+/* -------------------------------------------------------------------------------
+ * GTA02 FIQ related
+ *
+ * Calls into vibrator and hdq and based on the return values
+ * determines if we the FIQ source be kept alive
+ */
+
+#define DIVISOR_FROM_US(x) ((x) << 3)
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+extern int hdq_fiq_handler(void);
+#endif
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
+extern int gta02_vibrator_fiq_handler(void);
+#endif
+
+#if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
+
+/* Global data related to our fiq source */
+static u32 gta02_fiq_ack_mask;
+static struct s3c2410_pwm gta02_fiq_pwm_timer;
+static u16 gta02_fiq_timer_index;
+static int gta02_fiq_irq;
+
+static void gta02_fiq_handler(void)
+{
+	u16 divisor = 0xffff;
+
+	/* Vibrator servicing */
+
+	/* disable further timer interrupts if nobody has any work
+	 * or adjust rate according to who still has work
+	 *
+	 * CAUTION: it means forground code must disable FIQ around
+	 * its own non-atomic S3C2410_INTMSK changes... not common
+	 * thankfully and taken care of by the fiq-basis patch
+	 */
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+	if (gta02_vibrator_fiq_handler())
+		divisor = FIQ_DIVISOR_VIBRATOR;
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+	if (hdq_fiq_handler())
+		divisor = FIQ_DIVISOR_HDQ;
+#endif
+
+	if (divisor == 0xffff) /* mask the fiq irq source */
+		__raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
+			     S3C2410_INTMSK);
+	else /* still working, maybe at a different rate */
+		__raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
+
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
+}
+
+static void gta02_fiq_kick(void)
+{
+	unsigned long flags;
+	u32 tcon;
+
+	/* we have to take care about FIQ because this modification is
+	 * non-atomic, FIQ could come in after the read and before the
+	 * writeback and its changes to the register would be lost
+	 * (platform INTMSK mod code is taken care of already)
+	 */
+	local_save_flags(flags);
+	local_fiq_disable();
+	/* allow FIQs to resume */
+	__raw_writel(__raw_readl(S3C2410_INTMSK) &
+		     ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
+		     S3C2410_INTMSK);
+	tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
+	/* fake the timer to a count of 1 */
+	__raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
+	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
+		     S3C2410_TCON);
+	__raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
+	local_irq_restore(flags);
+}
+
+static int gta02_fiq_enable(void)
+{
+	int irq_index_fiq = IRQ_TIMER3;
+	int rc = 0;
+
+	local_fiq_disable();
+
+	gta02_fiq_irq = irq_index_fiq;
+	gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
+	gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
+
+	/* set up the timer to operate as a pwm device */
+
+	rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
+	gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
+	gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
+	/* default rate == ~32us */
+	gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
+
+	rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
+	if (rc)
+		goto bail;
+
+	s3c2410_pwm_start(&gta02_fiq_pwm_timer);
+
+	/* let our selected interrupt be a magic FIQ interrupt */
+	__raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
+
+	/* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
+	local_fiq_enable();
+
+	set_fiq_c_handler(gta02_fiq_handler);
+
+	return 0;
+
+bail:
+	printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
+
+	return rc;
+}
+
+static void gta02_fiq_disable(void)
+{
+	__raw_writel(0, S3C2410_INTMOD);
+	local_fiq_disable();
+	gta02_fiq_irq = 0; /* no active source interrupt now either */
+
+}
+/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
+
+#endif
+
+/*
+ * this gets called every 1ms when we paniced.
+ */
+
+static long gta02_panic_blink(long count)
+{
+	long delay = 0;
+	static long last_blink;
+	static char led;
+
+	if (count - last_blink < 100) /* 200ms period, fast blink */
+		return 0;
+
+	led ^= 1;
+	s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
+	gta02_gpb_setpin(GTA02_GPIO_AUX_LED, led);
+
+	last_blink = count;
+	return delay;
+}
+
+
+/**
+ * returns PCB revision information in b9,b8 and b2,b1,b0
+ * Pre-GTA02 A6 returns 0x000
+ *     GTA02 A6 returns 0x101
+ *     ...
+ */
+
+int gta02_get_pcb_revision(void)
+{
+	int n;
+	int u = 0;
+	static unsigned long pinlist[] = {
+		GTA02_PCB_ID1_0,
+		GTA02_PCB_ID1_1,
+		GTA02_PCB_ID1_2,
+		GTA02_PCB_ID2_0,
+		GTA02_PCB_ID2_1,
+	};
+	static int pin_offset[] = {
+		0, 1, 2, 8, 9
+	};
+
+	for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
+		/*
+		 * set the PCB version GPIO to be pulled-down input
+		 * force low briefly first
+		 */
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_setpin(pinlist[n], 0);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pinlist[n], 1);
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
+
+		udelay(10);
+
+		if (s3c2410_gpio_getpin(pinlist[n]))
+			u |= 1 << pin_offset[n];
+
+		/*
+		* when not being interrogated, all of the revision GPIO
+		* are set to output HIGH without pulldown so no current flows
+		* if they are NC or pulled up.
+		*/
+		s3c2410_gpio_setpin(pinlist[n], 1);
+		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pinlist[n], 0);
+	}
+
+	return u;
+}
+
+struct platform_device gta02_resume_reason_device = {
+	.name 		= "gta02-resume",
+	.num_resources	= 0,
+};
+
+static struct map_desc gta02_iodesc[] __initdata = {
+	{
+		.virtual	= 0xe0000000,
+		.pfn		= __phys_to_pfn(S3C2410_CS3+0x01000000),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+
+};
+
+struct pcf50633 *gta02_pcf;
+
+#ifdef CONFIG_CHARGER_PCF50633
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+static int gta02_get_charger_online_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
+}
+
+static int gta02_get_charger_active_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
+}
+#endif
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+	int  ma;
+
+	/* Interpret charger type */
+	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+		/* Stop GPO driving out now that we have a IA charger */
+		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+		ma = 1000;
+	} else
+		ma = 100;
+
+	pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	if (gta02_usb_vbus_draw) {
+		pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
+		return;
+	} else {
+#ifdef CONFIG_PCF50633_ADC
+		pcf50633_adc_async_read(pcf,
+			PCF50633_ADCC1_MUX_ADCIN1,
+			PCF50633_ADCC1_AVERAGE_16,
+			gta02_configure_pmu_for_charger, NULL);
+#else
+		/* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
+		pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+		return;
+	}
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+	if (irq == PCF50633_IRQ_USBINS) {
+		schedule_delayed_work(&gta02_charger_work,
+				GTA02_CHARGER_CONFIGURE_TIMEOUT);
+		return;
+	} else if (irq == PCF50633_IRQ_USBREM) {
+		cancel_delayed_work_sync(&gta02_charger_work);
+		gta02_usb_vbus_draw = 0;
+	}
+}
+
+static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
+{
+	pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
+			PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+        if (!gta02_pcf)
+		return;
+
+	gta02_usb_vbus_draw = ma;
+
+	schedule_delayed_work(&gta02_charger_work,
+				GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+
+static int gta02_udc_vbus_status(void)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+	if (!gta02_pcf)
+		return -ENODEV;
+
+	return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
+}
+
+#else /* !CONFIG_CHARGER_PCF50633 */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define gta02_get_charger_online_status NULL
+#define gta02_get_charger_active_status NULL
+#endif
+#define gta02_pmu_event_callback        NULL
+#define gta02_udc_vbus_draw             NULL
+#define gta02_udc_vbus_status		NULL
+#endif
+
+
+static struct platform_device gta02_pm_gps_dev = {
+	.name		= "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+	.name		= "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+	.name		= "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+	.name		= "gta02-pm-wlan",
+};
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device.  Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent.  This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static struct platform_device gta02_glamo_dev;
+static void mangle_glamo_res_by_system_rev(void);
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
+
+static struct regulator_consumer_supply ldo4_consumers[] = {
+	{
+		.dev = &gta02_pm_bt_dev.dev,
+		.supply = "BT_3V2",
+	},
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+	{
+		.dev = &gta02_pm_gps_dev.dev,
+		.supply = "RF_3V",
+	},
+};
+
+/*
+ * We need this dummy thing to fill the regulator consumers
+ */
+static struct platform_device gta02_mmc_dev = {
+	/* details filled in by glamo core */
+};
+
+static struct regulator_consumer_supply hcldo_consumers[] = {
+	{
+		.dev = &gta02_mmc_dev.dev,
+		.supply = "SD_3V3",
+	},
+};
+
+static char *gta02_batteries[] = {
+	"battery",
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+	.resumers = {
+		[0] = 	PCF50633_INT1_USBINS |
+			PCF50633_INT1_USBREM |
+			PCF50633_INT1_ALARM,
+		[1] = 	PCF50633_INT2_ONKEYF,
+		[2] = 	PCF50633_INT3_ONKEY1S,
+		[3] = 	PCF50633_INT4_LOWSYS |
+			PCF50633_INT4_LOWBAT |
+			PCF50633_INT4_HIGHTMP,
+	},
+
+	.batteries = gta02_batteries,
+	.num_batteries = ARRAY_SIZE(gta02_batteries),
+	.charging_restart_interval = (900 * HZ),
+	.chg_ref_current_ma = 1000,
+
+	.reg_init_data = {
+		[PCF50633_REGULATOR_AUTO] = {
+			.constraints = {
+				.name = "IO_3V3",
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.boot_on = 1,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_DOWN1] = {
+			.constraints = {
+				.name = "CORE_1V3",
+				.min_uV = 1300000,
+				.max_uV = 1600000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.boot_on = 1,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_DOWN2] = {
+			.constraints = {
+				.name = "IO_1V8",
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.boot_on = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_HCLDO] = {
+			.constraints = {
+				.name = "SD_3V3",
+				.min_uV = 2000000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+				.boot_on = 1,
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = hcldo_consumers,
+		},
+		[PCF50633_REGULATOR_LDO1] = {
+			.constraints = {
+				.name = "GSENSOR_3V3",
+				.min_uV = 1300000,
+				.max_uV = 1300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO2] = {
+			.constraints = {
+				.name = "CODEC_3V3",
+				.min_uV = 3300000,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO3] = {
+			.constraints = {
+				.min_uV = 3000000,
+				.max_uV = 3000000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_LDO4] = {
+			.constraints = {
+				.name = "BT_3V2",
+				.min_uV = 3200000,
+				.max_uV = 3200000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = ldo4_consumers,
+		},
+		[PCF50633_REGULATOR_LDO5] = {
+			.constraints = {
+				.name = "RF_3V",
+				.min_uV = 1500000,
+				.max_uV = 1500000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.apply_uV = 1,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 1,
+			.consumer_supplies = ldo5_consumers,
+		},
+		[PCF50633_REGULATOR_LDO6] = {
+			.constraints = {
+				.name = "LCM_3V",
+				.min_uV = 0,
+				.max_uV = 3300000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+			.num_consumer_supplies = 0,
+		},
+		[PCF50633_REGULATOR_MEMLDO] = {
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.state_mem = {
+					.enabled = 1,
+				},
+			},
+			.num_consumer_supplies = 0,
+		},
+
+	},
+	.probe_done = gta02_pmu_attach_child_devices,
+	.regulator_registered = gta02_pmu_regulator_registered,
+	.mbc_event_callback = gta02_pmu_event_callback,
+	.force_shutdown = gta02_pmu_force_shutdown,
+};
+
+static void mangle_pmu_pdata_by_system_rev(void)
+{
+	struct regulator_init_data *reg_init_data;
+
+	reg_init_data = gta02_pcf_pdata.reg_init_data;
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+		/* FIXME: this is only in v1 due to wrong PMU variant */
+		reg_init_data[PCF50633_REGULATOR_DOWN2]
+					.constraints.state_mem.enabled = 1;
+		break;
+	case GTA02v2_SYSTEM_REV:
+	case GTA02v3_SYSTEM_REV:
+	case GTA02v4_SYSTEM_REV:
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.min_uV = 3300000;
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.min_uV = 3300000;
+		reg_init_data[PCF50633_REGULATOR_LDO1]
+					.constraints.state_mem.enabled = 0;
+
+		reg_init_data[PCF50633_REGULATOR_LDO5]
+					.constraints.min_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO5]
+					.constraints.max_uV = 3000000;
+
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.min_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.max_uV = 3000000;
+		reg_init_data[PCF50633_REGULATOR_LDO6]
+					.constraints.apply_uV = 1;
+		break;
+	default:
+		break;
+	}
+}
+
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+	.name = "battery",
+	.rsense_mohms = 20,
+	.hdq_read = hdq_read,
+	.hdq_write = hdq_write,
+	.hdq_initialized = hdq_initialized,
+	.get_charger_online_status = gta02_get_charger_online_status,
+	.get_charger_active_status = gta02_get_charger_active_status
+};
+
+struct platform_device bq27000_battery_device = {
+	.name 		= "bq27000-battery",
+	.dev = {
+		.platform_data = &bq27000_pdata,
+	},
+};
+
+/* HDQ */
+
+static void gta02_hdq_attach_child_devices(struct device *parent_device)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v5_SYSTEM_REV:
+	case GTA02v6_SYSTEM_REV:
+		bq27000_battery_device.dev.parent = parent_device;
+		platform_device_register(&bq27000_battery_device);
+		break;
+	default:
+		break;
+	}
+}
+
+static void gta02_hdq_gpio_direction_out(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
+}
+
+static void gta02_hdq_gpio_direction_in(void)
+{
+	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
+}
+
+static void gta02_hdq_gpio_set_value(int val)
+{
+
+	s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
+}
+
+static int gta02_hdq_gpio_get_value(void)
+{
+	return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
+}
+
+static struct resource gta02_hdq_resources[] = {
+	[0] = {
+		.start	= GTA02v5_GPIO_HDQ,
+		.end	= GTA02v5_GPIO_HDQ,
+	},
+};
+
+struct hdq_platform_data gta02_hdq_platform_data = {
+	.attach_child_devices = gta02_hdq_attach_child_devices,
+	.gpio_dir_out = gta02_hdq_gpio_direction_out,
+	.gpio_dir_in = gta02_hdq_gpio_direction_in,
+	.gpio_set = gta02_hdq_gpio_set_value,
+	.gpio_get = gta02_hdq_gpio_get_value,
+
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+
+};
+
+struct platform_device gta02_hdq_device = {
+	.name 		= "hdq",
+	.num_resources	= 1,
+	.resource	= gta02_hdq_resources,
+	.dev		= {
+		.platform_data = &gta02_hdq_platform_data,
+	},
+};
+#endif
+
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+/* vibrator (child of FIQ) */
+
+static struct resource gta02_vibrator_resources[] = {
+	[0] = {
+		.start	= GTA02_GPIO_VIBRATOR_ON,
+		.end	= GTA02_GPIO_VIBRATOR_ON,
+	},
+};
+struct gta02_vib_platform_data gta02_vib_pdata = {
+	.enable_fiq = gta02_fiq_enable,
+	.disable_fiq = gta02_fiq_disable,
+	.kick_fiq = gta02_fiq_kick,
+};
+
+static struct platform_device gta02_vibrator_dev = {
+	.name		= "gta02-vibrator",
+	.num_resources	= ARRAY_SIZE(gta02_vibrator_resources),
+	.resource	= gta02_vibrator_resources,
+	.dev	 = {
+		.platform_data = &gta02_vib_pdata,
+		},
+};
+#endif
+
+/* NOR Flash */
+
+#define GTA02_FLASH_BASE	S3C2410_CS3 /* GCS3 */
+#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+	.width		= 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+	.start		= GTA02_FLASH_BASE,
+	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &gta02_nor_flash_data,
+			},
+	.resource	= &gta02_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+	.name 		= "s3c24xx_pwm",
+	.num_resources	= 0,
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("pcf50633", 0x73),
+		.irq = GTA02_IRQ_PCF50633,
+		.platform_data = &gta02_pcf_pdata,
+	},
+	{
+		I2C_BOARD_INFO("wm8753", 0x1a),
+	},
+};
+
+static struct s3c2410_nand_set gta02_nand_sets[] = {
+	[0] = {
+		.name		= "neo1973-nand",
+		.nr_chips	= 1,
+		.flags		= S3C2410_NAND_BBT,
+	},
+};
+
+/* choose a set of timings derived from S3C@2442B MCP54 
+ * data sheet (K5D2G13ACM-D075 MCP Memory)
+ */
+
+static struct s3c2410_platform_nand gta02_nand_info = {
+	.tacls		= 0,
+	.twrph0		= 25,
+	.twrph1		= 15,
+	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
+	.sets		= gta02_nand_sets,
+	.software_ecc	= 1,
+};
+
+
+static void gta02_s3c_mmc_set_power(unsigned char power_mode,
+    unsigned short vdd)
+{
+	static int is_on = -1;
+	int on;
+
+	on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
+	if (is_on != on)
+		gta02_wlan_reset(!on);
+	is_on = on;
+}
+
+
+static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
+	.set_power	= gta02_s3c_mmc_set_power,
+};
+
+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
+	    gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
+		gta02_gpb_setpin(GTA02_GPIO_USB_PULLUP, 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
+		/* FIXME! */
+		break;
+	default:
+		break;
+	}
+}
+
+/* get PMU to set USB current limit accordingly */
+
+static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+	.vbus_draw	= gta02_udc_vbus_draw,
+	.udc_command	= gta02_udc_command,
+/*	.get_vbus_status = gta02_udc_vbus_status,*/
+};
+
+
+/* Touchscreen configuration. */
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+const static struct ts_filter_group_configuration gta02_ts_group = {
+	.length = 12,
+	.close_enough = 10,
+	.threshold = 6,		/* At least half of the points in a group. */
+	.attempts = 10,
+};
+
+const static struct ts_filter_median_configuration gta02_ts_median = {
+	.extent = 20,
+	.decimation_below = 3,
+	.decimation_threshold = 8 * 3,
+	.decimation_above = 4,
+};
+
+const static struct ts_filter_mean_configuration gta02_ts_mean = {
+	.length = 4,
+};
+
+const static struct ts_filter_linear_configuration gta02_ts_linear = {
+	.constants = {1, 0, 0, 0, 1, 0, 1},	/* Don't modify coords. */
+	.coord0 = 0,
+	.coord1 = 1,
+};
+#endif
+
+const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
+{
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+	{&ts_filter_group_api,		&gta02_ts_group.config},
+	{&ts_filter_median_api,		&gta02_ts_median.config},
+	{&ts_filter_mean_api,		&gta02_ts_mean.config},
+	{&ts_filter_linear_api,		&gta02_ts_linear.config},
+#endif
+	{NULL, NULL},
+};
+
+const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
+	.delay = 10000,
+	.presc = 0xff, /* slow as we can go */
+	.filter_config = gta02_filter_configuration,
+};
+
+
+
+static void gta02_bl_set_intensity(int intensity)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+	int ret;
+
+	intensity >>= 2;
+
+	/*
+	 * One code path that leads here is from a kernel panic. Trying to turn
+	 * the backlight on just gives us a nearly endless stream of complaints
+	 * and accomplishes nothing. We can't win. Just give up.
+	 *
+	 * In the unlikely event that there's another path leading here while
+	 * we're atomic, we print at least a warning.
+	 */
+	if (in_atomic()) {
+		printk(KERN_ERR
+		    "gta02_bl_set_intensity called while atomic\n");
+		return;
+	}
+
+	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
+		old_intensity = 0;
+	else
+		old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+
+	if (intensity == old_intensity)
+		return;
+
+	/* We can't do this anywhere else */
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+
+	/*
+	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
+	 * if seen, you have to re-enable the LED unit
+	 */
+	if (!intensity || !old_intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+
+	if (!intensity) /* illegal to set LEDOUT to 0 */
+		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+									     2);
+	else
+		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+			       intensity);
+
+	if (intensity)
+		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+
+}
+
+static struct generic_bl_info gta02_bl_info = {
+	.name 			= "gta02-bl",
+	.max_intensity 		= 0xff,
+	.default_intensity 	= 0xff,
+	.set_bl_intensity 	= gta02_bl_set_intensity,
+};
+
+static struct platform_device gta02_bl_dev = {
+	.name		  = "generic-bl",
+	.id		  = 1,
+	.dev = {
+		.platform_data = &gta02_bl_info,
+	},
+};
+
+/* SPI: LCM control interface attached to Glamo3362 */
+
+static void gta02_jbt6k74_reset(int devidx, int level)
+{
+	glamo_lcm_reset(level);
+}	
+
+static void gta02_jbt6k74_probe_completed(struct device *dev)
+{
+	struct pcf50633 *pcf = gta02_pcf;
+
+	/* Switch on backlight. Qi does not do it for us */
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
+	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
+
+	gta02_bl_dev.dev.parent = dev;
+	platform_device_register(&gta02_bl_dev);
+}
+
+const struct jbt6k74_platform_data jbt6k74_pdata = {
+	.reset		= gta02_jbt6k74_reset,
+	.probe_completed = gta02_jbt6k74_probe_completed,
+};
+
+#if 0 /* currently this is not used and we use gpio spi */
+static struct glamo_spi_info glamo_spi_cfg = {
+	.board_size	= ARRAY_SIZE(gta02_spi_board_info),
+	.board_info	= gta02_spi_board_info,
+};
+#endif /* 0 */
+
+static struct glamo_spigpio_info glamo_spigpio_cfg = {
+	.pin_clk	= GLAMO_GPIO10_OUTPUT,
+	.pin_mosi	= GLAMO_GPIO11_OUTPUT,
+	.pin_cs		= GLAMO_GPIO12_OUTPUT,
+	.pin_miso	= 0,
+	.bus_num	= 2,
+};
+
+/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
+{
+	struct lis302dl_platform_data *pdata = lis->pdata;
+
+	if (!resume) {
+		 /*
+		 * we don't want to power them with a high level
+		 * because GSENSOR_3V3 is not up during suspend
+		 */
+		s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
+		s3c2410_gpio_setpin(pdata->pin_clk, 0);
+		s3c2410_gpio_setpin(pdata->pin_mosi, 0);
+		/* misnomer: it is a pullDOWN in 2442 */
+		s3c2410_gpio_pullup(pdata->pin_miso, 1);
+		return;
+	}
+
+	/* back to normal */
+	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
+	s3c2410_gpio_setpin(pdata->pin_clk, 1);
+	/* misnomer: it is a pullDOWN in 2442 */
+	s3c2410_gpio_pullup(pdata->pin_miso, 0);
+
+	s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
+
+}
+
+struct lis302dl_platform_data lis302_pdata_top = {
+		.name		= "lis302-1 (top)",
+		.pin_chip_select= S3C2410_GPD12,
+		.pin_clk	= S3C2410_GPG7,
+		.pin_mosi	= S3C2410_GPG6,
+		.pin_miso	= S3C2410_GPG5,
+		.interrupt	= GTA02_IRQ_GSENSOR_1,
+		.open_drain	= 1, /* altered at runtime by PCB rev */
+		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+struct lis302dl_platform_data lis302_pdata_bottom = {
+		.name		= "lis302-2 (bottom)",
+		.pin_chip_select= S3C2410_GPD13,
+		.pin_clk	= S3C2410_GPG7,
+		.pin_mosi	= S3C2410_GPG6,
+		.pin_miso	= S3C2410_GPG5,
+		.interrupt	= GTA02_IRQ_GSENSOR_2,
+		.open_drain	= 1, /* altered at runtime by PCB rev */
+		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+static struct spi_board_info gta02_spi_board_info[] = {
+	{
+		.modalias	= "jbt6k74",
+		/* platform_data */
+		.platform_data	= &jbt6k74_pdata,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 2,
+		/* chip_select */
+	},
+	{
+		.modalias	= "lis302dl",
+		/* platform_data */
+		.platform_data	= &lis302_pdata_top,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 3,
+		.chip_select	= 0,
+	},
+
+	{
+		.modalias	= "lis302dl",
+		/* platform_data */
+		.platform_data	= &lis302_pdata_bottom,
+		/* controller_data */
+		/* irq */
+		.max_speed_hz	= 100 * 1000,
+		.bus_num	= 3,
+		.chip_select	= 1,
+	},
+
+};
+
+static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
+{
+
+	/*
+	 * Huh... "quirk"... CS on this device is not really "CS" like you can
+	 * expect.
+	 *
+	 * When it is 0 it selects SPI interface mode.
+	 * When it is 1 it selects I2C interface mode.
+	 *
+	 * Because we have 2 devices on one interface we have to make sure
+	 * that the "disabled" device (actually in I2C mode) don't think we're
+	 * talking to it.
+	 *
+	 * When we talk to the "enabled" device, the "disabled" device sees
+	 * the clocks as I2C clocks, creating havoc.
+	 *
+	 * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
+	 * must ensure this is never issued.
+	 */
+
+	int cs_gpio, other_cs_gpio;
+
+	cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
+	other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
+	
+
+	if (cs == BITBANG_CS_ACTIVE) {
+		s3c2410_gpio_setpin(other_cs_gpio, 1);
+		s3c2410_gpio_setpin(cs_gpio, 1);
+		s3c2410_gpio_setpin(info->pin_clk, 1);
+		s3c2410_gpio_setpin(cs_gpio, 0);
+	} else {
+		s3c2410_gpio_setpin(cs_gpio, 1);
+		s3c2410_gpio_setpin(other_cs_gpio, 1);
+	} 
+}
+
+static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
+	.pin_clk	= S3C2410_GPG7,
+	.pin_mosi	= S3C2410_GPG6,
+	.pin_miso	= S3C2410_GPG5,
+	.bus_num	= 3,
+	.num_chipselect	= 2,
+	.chip_select	= gta02_lis302_chip_select,
+	.non_blocking_transfer = 1,
+};
+
+static struct platform_device gta02_spi_gpio_dev = {
+	.name		= "spi_s3c24xx_gpio",
+	.dev = {
+		.platform_data = &gta02_spigpio_cfg,
+	},
+};
+
+/*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+static struct resource gta02_led_resources[] = {
+	{
+		.name	= "gta02-power:orange",
+		.start	= GTA02_GPIO_PWR_LED1,
+		.end	= GTA02_GPIO_PWR_LED1,
+	}, {
+		.name	= "gta02-power:blue",
+		.start	= GTA02_GPIO_PWR_LED2,
+		.end	= GTA02_GPIO_PWR_LED2,
+	}, {
+		.name	= "gta02-aux:red",
+		.start	= GTA02_GPIO_AUX_LED,
+		.end	= GTA02_GPIO_AUX_LED,
+	},
+};
+
+struct platform_device gta02_led_dev = {
+	.name		= "gta02-led",
+	.num_resources	= ARRAY_SIZE(gta02_led_resources),
+	.resource	= gta02_led_resources,
+};
+
+static struct resource gta02_button_resources[] = {
+	[0] = {
+		.start = GTA02_GPIO_AUX_KEY,
+		.end   = GTA02_GPIO_AUX_KEY,
+	},
+	[1] = {
+		.start = GTA02_GPIO_HOLD_KEY,
+		.end   = GTA02_GPIO_HOLD_KEY,
+	},
+	[2] = {
+		.start = GTA02_GPIO_JACK_INSERT,
+		.end   = GTA02_GPIO_JACK_INSERT,
+	},
+	[3] = {
+		.start = 0,
+		.end   = 0,
+	},
+	[4] = {
+		.start = 0,
+		.end   = 0,
+	},
+};
+
+static struct platform_device gta02_button_dev = {
+	.name		= "gta02-button",
+	.num_resources	= ARRAY_SIZE(gta02_button_resources),
+	.resource	= gta02_button_resources,
+};
+
+static struct platform_device gta02_pm_usbhost_dev = {
+	.name		= "gta02-pm-host",
+};
+
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED,
+	},
+	.port[1]	= {
+		.flags	= 0,
+	},
+};
+
+static int glamo_irq_is_wired(void)
+{
+	int rc;
+	int count = 0;
+
+	/*
+	* GTA02 S-Media IRQs prior to A5 are broken due to a lack of
+	* a pullup on the INT# line.  Check for the bad behaviour.
+	*/
+	s3c2410_gpio_setpin(S3C2410_GPG4, 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
+	/*
+	* we force it low ourselves for a moment and resume being input.
+	* If there is a pullup, it won't stay low for long.  But if the
+	* level converter is there as on < A5 revision, the weak keeper
+	* on the input of the LC will hold the line low indefinitiely
+	*/
+	do
+		rc = s3c2410_gpio_getpin(S3C2410_GPG4);
+	while ((!rc) && ((count++) < 10));
+	if (rc) { /* it got pulled back up, it's good */
+		printk(KERN_INFO "Detected S-Media IRQ# pullup, "
+		"enabling interrupt\n");
+		return 0;
+	} else  /* Gah we can't work with this level converter */
+		printk(KERN_WARNING "** Detected bad IRQ# circuit found"
+		" on pre-A5 GTA02: S-Media interrupt disabled **\n");
+	return -ENODEV;
+}
+
+static int gta02_glamo_can_set_mmc_power(void)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+		case GTA02v3_SYSTEM_REV:
+		case GTA02v4_SYSTEM_REV:
+		case GTA02v5_SYSTEM_REV:
+		case GTA02v6_SYSTEM_REV:
+			return 1;
+	}
+
+	return 0;
+}
+
+/* Smedia Glamo 3362 */
+
+/*
+ * we crank down SD Card clock dynamically when GPS is powered
+ */
+
+static int gta02_glamo_mci_use_slow(void)
+{
+	return gta02_pm_gps_is_on();
+}
+
+static void gta02_glamo_external_reset(int level)
+{
+	s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
+	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
+}
+
+static struct glamofb_platform_data gta02_glamo_pdata = {
+	.width		= 43,
+	.height		= 58,
+	 /* 24.5MHz --> 40.816ns */
+	.pixclock	= 40816,
+	.left_margin	= 8,
+	.right_margin	= 16,
+	.upper_margin	= 2,
+	.lower_margin	= 16,
+	.hsync_len	= 8,
+	.vsync_len	= 2,
+	.fb_mem_size	= 0x400000, /* glamo has 8 megs of SRAM. we use 4 */
+	.xres		= {
+		.min	= 240,
+		.max	= 640,
+		.defval	= 480,
+	},
+	.yres		= {
+		.min	= 320,
+		.max	= 640,
+		.defval	= 640,
+	},
+	.bpp		= {
+		.min	= 16,
+		.max	= 16,
+		.defval	= 16,
+	},
+	//.spi_info	= &glamo_spi_cfg,
+	.spigpio_info	= &glamo_spigpio_cfg,
+
+	/* glamo MMC function platform data */
+	.mmc_dev = &gta02_mmc_dev,
+	.glamo_can_set_mci_power = gta02_glamo_can_set_mmc_power,
+	.glamo_mci_use_slow = gta02_glamo_mci_use_slow,
+	.glamo_irq_is_wired = glamo_irq_is_wired,
+	.glamo_external_reset = gta02_glamo_external_reset
+};
+
+static struct resource gta02_glamo_resources[] = {
+	[0] = {
+		.start	= S3C2410_CS1,
+		.end	= S3C2410_CS1 + 0x1000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= GTA02_IRQ_3D,
+		.end	= GTA02_IRQ_3D,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = GTA02_GPIO_3D_RESET,
+		.end   = GTA02_GPIO_3D_RESET,
+	},
+};
+
+static struct platform_device gta02_glamo_dev = {
+	.name		= "glamo3362",
+	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
+	.resource	= gta02_glamo_resources,
+	.dev		= {
+		.platform_data	= &gta02_glamo_pdata,
+	},
+};
+
+static void mangle_glamo_res_by_system_rev(void)
+{
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+		break;
+	default:
+		gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
+		gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
+		break;
+	}
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v1_SYSTEM_REV:
+	case GTA02v2_SYSTEM_REV:
+	case GTA02v3_SYSTEM_REV:
+	/* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
+		/* The hardware is missing a pull-up resistor and thus can't
+		 * support the Smedia Glamo IRQ */
+		gta02_glamo_resources[1].start = 0;
+		gta02_glamo_resources[1].end = 0;
+		break;
+	}
+}
+
+static void __init gta02_map_io(void)
+{
+	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+static irqreturn_t gta02_modem_irq(int irq, void *param)
+{
+/*	printk(KERN_DEBUG "modem wakeup interrupt\n");*/
+	gta_gsm_interrupts++;
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ar6000_wow_irq(int irq, void *param)
+{
+/*	printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
+	return IRQ_HANDLED;
+}
+
+/*
+ * hardware_ecc=1|0
+ */
+static char hardware_ecc_str[4] __initdata = "";
+
+static int __init hardware_ecc_setup(char *str)
+{
+	if (str)
+		strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
+	return 1;
+}
+
+__setup("hardware_ecc=", hardware_ecc_setup);
+
+/* these are the guys that don't need to be children of PMU */
+
+static struct platform_device *gta02_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_sdi,
+	&s3c_device_usbgadget,
+	&s3c_device_nand,
+	&gta02_nor_flash,
+
+	&s3c24xx_pwm_device,
+	&gta02_led_dev,
+	&gta02_pm_wlan_dev, /* not dependent on PMU */
+
+	&s3c_device_iis,
+	&s3c_device_i2c0,
+};
+
+/* these guys DO need to be children of PMU */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+	&s3c_device_ts, /* input 1 */
+	&gta02_pm_gsm_dev,
+	&gta02_pm_usbhost_dev,
+	&gta02_spi_gpio_dev, /* input 2 and 3 */
+	&gta02_button_dev, /* input 4 */
+	&gta02_resume_reason_device,
+};
+
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
+{
+	struct platform_device *regulator, *pdev;
+
+	gta02_pcf = pcf;
+
+	regulator = pcf->regulator_pdev[id];
+
+	switch(id) {
+		case PCF50633_REGULATOR_LDO4:
+			pdev = &gta02_pm_bt_dev;
+			break;
+		case PCF50633_REGULATOR_LDO5:
+			pdev = &gta02_pm_gps_dev;
+			break;
+		case PCF50633_REGULATOR_HCLDO:
+			pdev = &gta02_glamo_dev;
+			break;
+		default:
+            return;
+	}
+
+	pdev->dev.parent = &regulator->dev;
+	platform_device_register(pdev);
+}
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device.  Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent.  This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+	mangle_glamo_res_by_system_rev();
+	platform_add_devices(gta02_devices_pmu_children,
+					ARRAY_SIZE(gta02_devices_pmu_children));
+
+/*    regulator_has_full_constraints();*/
+}
+
+static void gta02_poweroff(void)
+{
+	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
+		  PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+static void __init gta02_machine_init(void)
+{
+	int rc;
+
+	/* set the panic callback to make AUX blink fast */
+	panic_blink = gta02_panic_blink;
+
+	switch (S3C_SYSTEM_REV_ATAG) {
+	case GTA02v6_SYSTEM_REV:
+		/* we need push-pull interrupt from motion sensors */
+		lis302_pdata_top.open_drain = 0;
+		lis302_pdata_bottom.open_drain = 0;
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_init(&motion_irq_lock);
+
+#ifdef CONFIG_CHARGER_PCF50633
+	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
+#endif
+
+	/* Glamo chip select optimization */
+/*	 *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
+
+	/* do not force soft ecc if we are asked to use hardware_ecc */
+	if (hardware_ecc_str[0] == '1')
+		gta02_nand_info.software_ecc = 0;
+
+	s3c_device_usb.dev.platform_data = &gta02_usb_info;
+	s3c_device_nand.dev.platform_data = &gta02_nand_info;
+	s3c_device_sdi.dev.platform_data = &gta02_s3c_mmc_cfg;
+
+	/* acc sensor chip selects */
+	s3c2410_gpio_setpin(S3C2410_GPD12, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPD13, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
+
+	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_i2c0_set_platdata(NULL);
+	set_s3c2410ts_info(&gta02_ts_cfg);
+	
+	mangle_glamo_res_by_system_rev();
+
+	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+	spi_register_board_info(gta02_spi_board_info,
+				ARRAY_SIZE(gta02_spi_board_info));
+
+#ifdef CONFIG_CHARGER_PCF50633
+	mangle_pmu_pdata_by_system_rev();
+#endif
+
+	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+
+	s3c_pm_init();
+
+	/* Make sure the modem can wake us up */
+	set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
+	rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
+			 "modem", NULL);
+	if (rc < 0)
+		printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
+	enable_irq_wake(GTA02_IRQ_MODEM);
+
+	/* Make sure the wifi module can wake us up*/
+	set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
+	rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
+			"ar6000", NULL);
+
+	if (rc < 0)
+		printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
+	enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
+
+	pm_power_off = gta02_poweroff;
+
+	/* Register the HDQ and vibrator as children of pwm device */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+	gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
+	platform_device_register(&gta02_hdq_device);
+#endif
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+	gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; 
+	platform_device_register(&gta02_vibrator_dev);
+#endif
+}
+
+void DEBUG_LED(int n)
+{
+	switch (n) {
+	case 0:
+		gta02_gpb_setpin(GTA02_GPIO_PWR_LED1, 1);
+		break;
+	case 1:
+		gta02_gpb_setpin(GTA02_GPIO_PWR_LED2, 1);
+		break;
+	default:
+		gta02_gpb_setpin(GTA02_GPIO_AUX_LED, 1);
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(DEBUG_LED);
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= gta02_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= gta02_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END