rockchip: add support for Pine64 RockPro64

This adds the new rockchip target and support for RockPro64 RK3399

Flash:    16 MiB SPI NOR
RAM:      2 GiB/4 GiB LPDDR4
SoC:      RK3399
USB:      2x USB 2.0, 1x USB 3.0, 1x USB-C
Ethernet: 1x GbE
PCIe:     PCIe 2.0, 4 lanes
Storage:  eMMC or SD card
Optional SDIO wifi/bt module

The Pine64 RockPro64 is a single-board-computer with a 4x PCIe connector,
6 ARM64 cores (4 little, 2 big), plenty of RAM and storage.

By default the single Gigabit-Ethernet port is configured as the
LAN port.

Installation of the firware is possible by dd'ing the image
to an SD card or the eMMC flash.

Serial: 3v3 1500000 8n1

U-boot is build from the mainline tree and
integrated into the images. Required ATF to build u-boot
is downloaded from a CI build bot.

Signed-off-by: Tobias Mädel <t.maedel@alfeld.de>
Tested-by: Tobias Schramm <t.schramm@manjaro.org>

3 files changed, 117 insertions, 0 deletions

diff --git a/target/linux/rockchip/armv8/base-files/etc/board.d/02_network b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..c5adda1706
--- /dev/null
+++ b/target/linux/rockchip/armv8/base-files/etc/board.d/02_network
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/rockchip/armv8/base-files/lib/preinit/79_move_config b/target/linux/rockchip/armv8/base-files/lib/preinit/79_move_config
new file mode 100644
index 0000000000..96e636ee81
--- /dev/null
+++ b/target/linux/rockchip/armv8/base-files/lib/preinit/79_move_config
@@ -0,0 +1,16 @@
+move_config() {
+	local partdev
+
+	. /lib/upgrade/common.sh
+
+	if export_bootdevice && export_partdevice partdev 1; then
+		if mount -o rw,noatime "/dev/$partdev" /mnt; then
+			if [ -f "/mnt/$BACKUP_FILE" ]; then
+				mv -f "/mnt/$BACKUP_FILE" /
+			fi
+			umount /mnt
+		fi
+	fi
+}
+
+boot_hook_add preinit_mount_root move_config
diff --git a/target/linux/rockchip/armv8/base-files/lib/upgrade/platform.sh b/target/linux/rockchip/armv8/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000000..faed0667f1
--- /dev/null
+++ b/target/linux/rockchip/armv8/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,86 @@
+platform_check_image() {
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	get_partitions "/dev/$diskdev" bootdisk
+
+	#extract the boot sector from the image
+	get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b 2>/dev/null
+
+	get_partitions /tmp/image.bs image
+
+	#compare tables
+	diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+	rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+	if [ -n "$diff" ]; then
+		echo "Partition layout has changed. Full image will be written."
+		ask_bool 0 "Abort" && exit 1
+		return 0
+	fi
+}
+
+platform_copy_config() {
+	local partdev
+
+	if export_partdevice partdev 1; then
+		mount -o rw,noatime "/dev/$partdev" /mnt
+		cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+		umount /mnt
+	fi
+}
+
+platform_do_upgrade() {
+	local diskdev partdev diff
+
+	export_bootdevice && export_partdevice diskdev 0 || {
+		echo "Unable to determine upgrade device"
+		return 1
+	}
+
+	sync
+
+	if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+		get_partitions "/dev/$diskdev" bootdisk
+
+		#extract the boot sector from the image
+		get_image "$@" | dd of=/tmp/image.bs count=1 bs=512b
+
+		get_partitions /tmp/image.bs image
+
+		#compare tables
+		diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+	else
+		diff=1
+	fi
+
+	if [ -n "$diff" ]; then
+		get_image "$@" | dd of="/dev/$diskdev" bs=4096 conv=fsync
+
+		# Separate removal and addtion is necessary; otherwise, partition 1
+		# will be missing if it overlaps with the old partition 2
+		partx -d - "/dev/$diskdev"
+		partx -a - "/dev/$diskdev"
+
+		return 0
+	fi
+
+	#iterate over each partition from the image and write it to the boot disk
+	while read part start size; do
+		if export_partdevice partdev $part; then
+			echo "Writing image to /dev/$partdev..."
+			get_image "$@" | dd of="/dev/$partdev" ibs="512" obs=1M skip="$start" count="$size" conv=fsync
+		else
+			echo "Unable to find partition $part device, skipped."
+		fi
+	done < /tmp/partmap.image
+
+	#copy partition uuid
+	echo "Writing new UUID to /dev/$diskdev..."
+	get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
+}