treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>

1 files changed, 0 insertions, 175 deletions

diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
deleted file mode 100644
index c2a992a174..0000000000
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	compatible = "realtek,rtl838x-soc";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		frequency = <800000000>;
-
-		cpu@0 {
-			compatible = "mips,mips34Kc";
-			reg = <0>;
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	cpuintc: cpuintc {
-		compatible = "mti,cpu-interrupt-controller";
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	lx_clk: lx_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <175000000>;
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x18000000 0x10000>;
-
-		intc: interrupt-controller@3000 {
-			compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
-			reg = <0x3000 0x18>, <0x3018 0x18>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			interrupt-parent = <&cpuintc>;
-			interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
-		};
-
-		rtl9300clock: rtl9300clock@3200 {
-			compatible = "realtek,rtl9300clock";
-			reg = <0x3200 0x10>, <0x3210 0x10>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <7 5>, <8 5>;
-		};
-
-		spi0: spi@1200 {
-			compatible = "realtek,rtl8380-spi";
-			reg = <0x1200 0x100>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		uart0: uart@2000 {
-			compatible = "ns16550a";
-			reg = <0x2000 0x100>;
-
-			clocks = <&lx_clk>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <30 1>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-		};
-
-		uart1: uart@2100 {
-			compatible = "ns16550a";
-			reg = <0x2100 0x100>;
-
-			clocks = <&lx_clk>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <31 0>;
-
-			reg-io-width = <1>;
-			reg-shift = <2>;
-			fifo-size = <1>;
-			no-loopback-test;
-
-			status = "disabled";
-		};
-
-		watchdog0: watchdog@3260 {
-			compatible = "realtek,rtl9300-wdt";
-			reg = <0x3260 0xc>;
-
-			realtek,reset-mode = "soc";
-
-			clocks = <&lx_clk>;
-			timeout-sec = <30>;
-
-			interrupt-parent = <&intc>;
-			interrupt-names = "phase1", "phase2";
-			interrupts = <5 4>, <6 4>;
-		};
-
-		gpio0: gpio-controller@3300 {
-			compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
-			reg = <0x3300 0x1c>, <0x3338 0x8>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			ngpios = <24>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupts = <13 1>;
-		};
-
-	};
-
-	pinmux_led: pinmux@1b00cc00 {
-		compatible = "pinctrl-single";
-		reg = <0x1b00cc00 0x4>;
-
-		pinctrl-single,bit-per-mux;
-		pinctrl-single,register-width = <32>;
-		pinctrl-single,function-mask = <0x1>;
-		#pinctrl-cells = <2>;
-
-		/* enable GPIO 0 */
-		pinmux_disable_sys_led: disable_sys_led {
-			pinctrl-single,bits = <0x0 0x0 0x1000>;
-		};
-	};
-
-	ethernet0: ethernet@1b00a300 {
-		compatible = "realtek,rtl838x-eth";
-		reg = <0x1b00a300 0x100>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <24 3>;
-
-		phy-mode = "internal";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-		};
-	};
-
-	switch0: switch@1b000000 {
-		compatible = "realtek,rtl83xx-switch";
-		status = "okay";
-
-		interrupt-parent = <&intc>;
-		interrupts = <23 2>;
-	};
-};