aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorDaniel Golle <daniel@makrotopia.org>2017-04-21 00:53:03 +0200
committerDaniel Golle <daniel@makrotopia.org>2017-04-21 02:29:21 +0200
commitc5a7dc49d11810838af9eafdddadf92a3b8218aa (patch)
tree5005a391872e71b6527e5f11a76f3a88d99d5d67 /target/linux/ramips
parent23d7c4d6324e553cd2e05e9b9751af380fd1ae56 (diff)
downloadupstream-c5a7dc49d11810838af9eafdddadf92a3b8218aa.tar.gz
upstream-c5a7dc49d11810838af9eafdddadf92a3b8218aa.tar.bz2
upstream-c5a7dc49d11810838af9eafdddadf92a3b8218aa.zip
ramips: split Phicomm PSG1218 and PSG1218K2C
PSG1218 got only 4 Ethernet ports and WAN on port 3 while PSG1218K2C got 5 Ethernet ports and WAN on port 4 Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/PSG1218.dts83
-rw-r--r--target/linux/ramips/dts/PSG1218.dtsi74
-rw-r--r--target/linux/ramips/dts/PSG1218K2C.dts47
-rw-r--r--target/linux/ramips/image/mt7620.mk9
9 files changed, 145 insertions, 84 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 4073d803f2..2c44a83f28 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -287,7 +287,8 @@ pbr-m1)
psg1208)
set_wifi_led "$board:white:wlan2g"
;;
-psg1218)
+psg1218\|
+psg1218k2c)
ucidef_set_led_netdev "Network" "Network" "$board:blue:status" "eth0"
ucidef_set_led_default "status" "STATUS" "$board:yellow:status" "0"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 7bdebbe97f..b2966c26da 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -95,7 +95,7 @@ ramips_setup_interfaces()
oy-0001|\
pbr-m1|\
psg1208|\
- psg1218|\
+ psg1218k2c|\
r6220|\
sap-g3200u3|\
sk-wb8|\
@@ -115,6 +115,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
+ psg1218)
+ ucidef_add_switch "switch0" \
+ "0:lan:3" "1:lan:2" "2:lan:1" "3:wan" "6@eth0"
+ ;;
whr-300hp2|\
whr-600d|\
wsr-1166|\
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 3dbf87ac5d..af18264f99 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -104,7 +104,8 @@ get_status_led() {
psg1208)
status_led="$board:white:wps"
;;
- psg1218)
+ psg1218|\
+ psg1218k2c)
status_led="$board:yellow:status"
;;
cy-swr1100|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 786aecb99b..a75f5208a3 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -400,6 +400,9 @@ ramips_board_detect() {
*"PSG1218")
name="psg1218"
;;
+ *"PSG1218K2C")
+ name="psg1218k2c"
+ ;;
*"PSR-680W"*)
name="psr-680w"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 08fa45ad98..827109b59e 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -113,6 +113,7 @@ platform_check_image() {
pbr-m1|\
psg1208|\
psg1218|\
+ psg1218k2c|\
psr-680w|\
px-4885|\
rb750gr3|\
diff --git a/target/linux/ramips/dts/PSG1218.dts b/target/linux/ramips/dts/PSG1218.dts
index 1e53dcef3d..0492d65502 100644
--- a/target/linux/ramips/dts/PSG1218.dts
+++ b/target/linux/ramips/dts/PSG1218.dts
@@ -1,8 +1,6 @@
/dts-v1/;
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "PSG1218.dtsi"
/ {
compatible = "PSG1218", "ralink,mt7620a-soc";
@@ -10,7 +8,6 @@
gpio-leds {
compatible = "gpio-leds";
-
blue {
label = "psg1218:blue:status";
gpios = <&gpio0 10 1>;
@@ -23,59 +20,7 @@
red {
label = "psg1218:red:status";
- gpios = <&gpio0 8 0>;
- };
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 1>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@20000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@30000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@40000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
+ gpios = <&gpio0 8 0>;
};
};
};
@@ -83,14 +28,9 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "pa";
ralink,function = "gpio";
};
-
- pa {
- ralink,group = "pa";
- ralink,function = "pa";
- };
};
};
@@ -100,20 +40,3 @@
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
-
-&pcie {
- status = "okay";
-
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
- };
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
-};
diff --git a/target/linux/ramips/dts/PSG1218.dtsi b/target/linux/ramips/dts/PSG1218.dtsi
new file mode 100644
index 0000000000..b3b58948d2
--- /dev/null
+++ b/target/linux/ramips/dts/PSG1218.dtsi
@@ -0,0 +1,74 @@
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
diff --git a/target/linux/ramips/dts/PSG1218K2C.dts b/target/linux/ramips/dts/PSG1218K2C.dts
new file mode 100644
index 0000000000..d8105b9a22
--- /dev/null
+++ b/target/linux/ramips/dts/PSG1218K2C.dts
@@ -0,0 +1,47 @@
+/dts-v1/;
+
+#include "PSG1218.dtsi"
+
+/ {
+ compatible = "PSG1218K2C", "ralink,mt7620a-soc";
+ model = "Phicomm PSG1218K2C";
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ blue {
+ label = "psg1218k2c:blue:status";
+ gpios = <&gpio0 10 1>;
+ };
+
+ yellow {
+ label = "psg1218k2c:yellow:status";
+ gpios = <&gpio0 11 1>;
+ };
+
+ red {
+ label = "psg1218k2c:red:status";
+ gpios = <&gpio0 8 0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x28>;
+ mediatek,portmap = "llllw";
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 016e5acc59..63d5a7c00a 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -325,10 +325,17 @@ TARGET_DEVICES += psg1208
define Device/psg1218
DTS := PSG1218
DEVICE_TITLE := Phicomm PSG1218
- DEVICE_PACKAGES := kmod-mt76
+ DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += psg1218
+define Device/psg1218k2c
+ DTS := PSG1218K2C
+ DEVICE_TITLE := Phicomm PSG1218K2C
+ DEVICE_PACKAGES := kmod-mt76x2
+endef
+TARGET_DEVICES += psg1218k2c
+
define Device/rp-n53
DTS := RP-N53
DEVICE_TITLE := Asus RP-N53