aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2019-12-11 21:54:24 +0100
committerDavid Bauer <mail@david-bauer.net>2020-03-04 23:02:46 +0100
commit4e9317201d3fb47800b387d69d79c00f38d2dbfd (patch)
tree0c5f9b7295b19b4225be991f6d90dd1aabb53356 /target/linux/ramips
parent3251ac8f2d3de29af2a1584f427246ea702fdbd9 (diff)
downloadupstream-4e9317201d3fb47800b387d69d79c00f38d2dbfd.tar.gz
upstream-4e9317201d3fb47800b387d69d79c00f38d2dbfd.tar.bz2
upstream-4e9317201d3fb47800b387d69d79c00f38d2dbfd.zip
ramips: mt7621: add support for Netgear R6800
This patch adds support for the Netgear R6800, aka Netgear AC1900 and R6800-100PES. Specification: - SoC: MediaTek MT7621AT (880 MHz) - Flash: 128 MiB NAND - RAM: 256 MiB - Wireless: MediaTek MT7615EN b/g/n , MediaTek MT7615EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - USB 2.0 - USB 3.0 - Serial baud rate of Bootloader and factory firmware: 57600 Known issues: - Device has 3 wifi LEDs: Wifi 5Ghz, Wifi 2.4Ghz and Wifi on/off. Wifi on/off is not used. Installation: - apply factory image via stock web-gui. Back to stock: - nmrpflash can be used to recover to the stock Netgear firmware. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7621_netgear_r6800.dts124
-rw-r--r--target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi125
-rw-r--r--target/linux/ramips/image/mt7621.mk12
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/01_leds7
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network2
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/mt7621/config-4.141
7 files changed, 272 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_netgear_r6800.dts b/target/linux/ramips/dts/mt7621_netgear_r6800.dts
new file mode 100644
index 0000000000..fed7bbba38
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_netgear_r6800.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "mt7621_netgear_sercomm_bzv.dtsi"
+
+/ {
+ compatible = "netgear,r6800", "mediatek,mt7621-soc";
+ model = "Netgear R6800";
+
+ aliases {
+ led-boot = &led_power_white;
+ led-failsafe = &led_power_orange;
+ led-running = &led_power_white;
+ led-upgrade = &led_power_orange;
+ label-mac-device = &ethernet;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_orange: power_orange {
+ gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:power";
+ };
+
+ led_power_white: power_white {
+ gpios = <&gpio_expander 1 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:power";
+ };
+
+ wan_orange {
+ gpios = <&gpio_expander 2 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:wan";
+ };
+
+ wan_white {
+ gpios = <&gpio_expander 3 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:wan";
+ };
+
+ wlan2g {
+ gpios = <&gpio_expander 4 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:wlan2g";
+ linux,default-trigger = "phy0radio";
+ };
+
+ wlan5g {
+ gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:wlan5g";
+ linux,default-trigger = "phy1radio";
+ };
+
+ usb2 {
+ gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:usb2";
+ linux,default-trigger = "usbport";
+ trigger-sources = <&ehci_port2>;
+ };
+
+ usb3 {
+ gpios = <&gpio_expander 7 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:usb3";
+ linux,default-trigger = "usbport";
+ trigger-sources = <&xhci_ehci_port1>;
+ };
+
+ lan1_orange {
+ gpios = <&gpio_expander 8 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:lan1";
+ };
+
+ lan1_white {
+ gpios = <&gpio_expander 9 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:lan1";
+ };
+
+ lan2_orange {
+ gpios = <&gpio_expander 10 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:lan2";
+ };
+
+ lan2_white {
+ gpios = <&gpio_expander 11 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:lan2";
+ };
+
+ lan3_orange {
+ gpios = <&gpio_expander 12 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:lan3";
+ };
+
+ lan3_white {
+ gpios = <&gpio_expander 13 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:lan3";
+ };
+
+ lan4_orange {
+ gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
+ label = "r6800:orange:lan4";
+ };
+
+ lan4_white {
+ gpios = <&gpio_expander 15 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:lan4";
+ };
+
+ wps {
+ gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ label = "r6800:white:wps";
+ };
+
+ wlan {
+ gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+ label = "r6800:white:wlan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ ralink,group = "uart3", "uart2", "jtag", "wdt";
+ ralink,function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
new file mode 100644
index 0000000000..6538b6926e
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "mediatek,mt7621-soc";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&i2c {
+ status = "okay";
+
+ gpio_expander: i2c0gpio-expander@20{
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "semtech,sx1503q";
+ reg = <0x20>;
+
+ gpio-controller;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "SC PART_MAP";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "ubi";
+ reg = <0x600000 0x2800000>;
+ };
+
+ partition@2e00000 {
+ label = "reserved0";
+ reg = <0x2e00000 0x1800000>;
+ read-only;
+ };
+
+ factory: partition@4600000 {
+ label = "factory";
+ reg = <0x4600000 0x200000>;
+ read-only;
+ };
+
+ partition@4800000 {
+ label = "reserved1";
+ reg = <0x4800000 0x3800000>;
+ read-only;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 4c27cdbd31..82fbd87df9 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -595,6 +595,18 @@ define Device/netgear_r6350
endef
TARGET_DEVICES += netgear_r6350
+define Device/netgear_r6800
+ $(Device/netgear_sercomm_nand)
+ DEVICE_MODEL := R6800
+ SERCOMM_HWNAME := R6950
+ SERCOMM_HWID := BZV
+ SERCOMM_HWVER := A001
+ SERCOMM_SWVER := 0x0062
+ IMAGE_SIZE := 40960k
+ DEVICE_PACKAGES += kmod-mt7615e
+endef
+TARGET_DEVICES += netgear_r6800
+
define Device/netgear_r6850
$(Device/netgear_sercomm_nand)
DEVICE_MODEL := R6850
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 4eab8f42fe..ac73729d1b 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -52,6 +52,13 @@ netgear,r6850|\
netgear,wndr3700-v5)
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
;;
+netgear,r6800)
+ ucidef_set_led_switch "wan" "WAN" "$boardname:white:wan" "switch0" "0x10"
+ ucidef_set_led_switch "lan1" "LAN1" "$boardname:white:lan1" "switch0" "0x08"
+ ucidef_set_led_switch "lan2" "LAN2" "$boardname:white:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "$boardname:white:lan3" "switch0" "0x02"
+ ucidef_set_led_switch "lan4" "LAN4" "$boardname:white:lan4" "switch0" "0x01"
+ ;;
tplink,re350-v1|\
tplink,re650-v1)
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 9b7b56f0ba..a84ee808a3 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -41,6 +41,7 @@ ramips_setup_interfaces()
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
+ netgear,r6800|\
netgear,r6850|\
netgear,wndr3700-v5|\
netis,wf2881|\
@@ -252,6 +253,7 @@ ramips_setup_macs()
;;
netgear,r6260|\
netgear,r6350|\
+ netgear,r6800|\
netgear,r6850)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
;;
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
index 465ea0a909..f6b5c86431 100755
--- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
@@ -48,6 +48,7 @@ platform_do_upgrade() {
netgear,r6220|\
netgear,r6260|\
netgear,r6350|\
+ netgear,r6800|\
netgear,r6850|\
netis,wf2881|\
xiaomi,mir3g|\
diff --git a/target/linux/ramips/mt7621/config-4.14 b/target/linux/ramips/mt7621/config-4.14
index 4112cad780..2ae6afb97f 100644
--- a/target/linux/ramips/mt7621/config-4.14
+++ b/target/linux/ramips/mt7621/config-4.14
@@ -236,6 +236,7 @@ CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PINCTRL_SX150X=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y