aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt76x8
diff options
context:
space:
mode:
authorEwan Parker <ewan@ewan.cc>2020-10-31 09:29:54 +0000
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-02-05 14:54:47 +0100
commitddafcc79473249089ffd4c2de8159af2a27e5683 (patch)
tree8cf04de250e4d768c7c0660580f30a04ea1f6ddf /target/linux/ramips/mt76x8
parenta17b8eaa2e4b319b7069170398fe965786a813e9 (diff)
downloadupstream-ddafcc79473249089ffd4c2de8159af2a27e5683.tar.gz
upstream-ddafcc79473249089ffd4c2de8159af2a27e5683.tar.bz2
upstream-ddafcc79473249089ffd4c2de8159af2a27e5683.zip
ramips: add support for Hi-Link HLK-7688A
Specifications: - SoC: MediaTek MT7688AN - RAM: 128 MB - Flash: 32 MB - Ethernet: 5x 10/100 (1x WAN, 4x LAN) - Wireless: built in 2.4GHz (bgn) - USB: 1x USB 2.0 port - Buttons: 1x Reset - LEDs: 1x (WiFi) Flash instructions: - Configure TFTP server with IP address 10.10.10.3 - Name the firmware file as firmware.bin - Connect any Ethernet port to the TFTP server's LAN - Choose option 2 in U-Boot - Alternatively choose option 7 to upload firmware to the built-in web server MAC addresses as verified by OEM firmware: use address source 2g *:XX factory 0x4 LAN *:XX+1 factory 0x28 WAN *:XX+1 factory 0x2e Notes: This board is ostensibly a module containing the MediaTek MT7688AN SoC, 128 MB DDR2 SDRAM and 32 MB flash storage. The SoC can be operated in IoT Gateway Mode or IoT Device Mode. From some vendors the U-Boot that comes installed operates on UART 2 which is inaccessible in gateway mode and operates unreliably in the Linux kernel when using more than 64 MB of RAM. For those, updating U-Boot is recommended. Signed-off-by: Ewan Parker <ewan@ewan.cc> [add WLAN to 01_leds] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt76x8')
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network2
2 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index 31bd9e05b1..bcbc2ed1e6 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -33,6 +33,9 @@ hilink,hlk-7628n|\
skylab,skw92a)
ucidef_set_led_netdev "wifi_led" "wifi" "green:wlan" "wlan0"
;;
+hilink,hlk-7688a)
+ ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+ ;;
hiwifi,hc5661a|\
hiwifi,hc5761a)
ucidef_set_led_switch "internet" "internet" "blue:internet" "switch0" "0x10"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index fcc2630b3f..8bbcbb2190 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -63,6 +63,7 @@ ramips_setup_interfaces()
"1:lan" "0:wan" "6@eth0"
;;
hilink,hlk-7628n|\
+ hilink,hlk-7688a|\
hiwifi,hc5861b|\
skylab,skw92a|\
tplink,archer-c20-v4|\
@@ -166,6 +167,7 @@ ramips_setup_macs()
lan_mac=$wan_mac
;;
cudy,wr1000|\
+ hilink,hlk-7688a|\
wavlink,wl-wn577a2)
wan_mac=$(mtd_get_mac_binary factory 0x2e)
label_mac=$(mtd_get_mac_binary factory 0x4)