aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7621
diff options
context:
space:
mode:
authorYong-hyu Ban <perillamint@quendi.moe>2019-10-07 05:06:31 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-01-05 23:38:00 +0100
commit99dd2709b855baa9e68c7c7106743a7c4a91ee0c (patch)
treee1e23398cc3a3ca9598eb705c7df486029f35aa0 /target/linux/ramips/mt7621
parent8fc25d8664841ff1cd0f3082b4c404cab76d6341 (diff)
downloadupstream-99dd2709b855baa9e68c7c7106743a7c4a91ee0c.tar.gz
upstream-99dd2709b855baa9e68c7c7106743a7c4a91ee0c.tar.bz2
upstream-99dd2709b855baa9e68c7c7106743a7c4a91ee0c.zip
ramips: add support for ipTIME A8004T
ipTIME A8004T is a 2.4/5GHz band AC2600 router, based on Mediatek MT7621A. Specifications: - SoC: MT7621A - RAM: DDR3 256M - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: MT7615E - 5GHz: MT7615E - Ethernet: 5x 10/100/1000Mbps - Switch: SoC internal - USB: 1 * USB3.0 port - UART: - J4: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 - Other info: - J9: Unknown unpopulated header. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Yong-hyu Ban <perillamint@quendi.moe> [do not enable xhci node in DTS which is already enabled in DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt7621')
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network6
1 files changed, 4 insertions, 2 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 4e8e2cb9ed..ad6d6cd5fe 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -74,7 +74,8 @@ ramips_setup_interfaces()
elecom,wrc-2533gst|\
iodata,wn-ax1167gr|\
iodata,wn-gx300gr|\
- iodata,wnpr2600g)
+ iodata,wnpr2600g|\
+ iptime,a8004t)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
@@ -222,7 +223,8 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$wan_mac
;;
- iptime,a6ns-m)
+ iptime,a6ns-m|\
+ iptime,a8004t)
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
;;
jcg,jhr-ac876m)