diff options
| author | Wenli Looi <wlooi@ucalgary.ca> | 2022-07-02 20:18:59 +0000 |
|---|---|---|
| committer | Christian Marangi <ansuelsmth@gmail.com> | 2022-07-19 14:49:04 +0200 |
| commit | 0f068e7c4a83bcbf20c4e52a5f8a3f1fe2af2246 (patch) | |
| tree | fd2252436e57b6144f1e70b0b141d50bc9609597 /target/linux/ramips/mt7621/base-files | |
| parent | efca76ffce5cf464e82d8269d79877f442209a0a (diff) | |
| download | upstream-0f068e7c4a83bcbf20c4e52a5f8a3f1fe2af2246.tar.gz upstream-0f068e7c4a83bcbf20c4e52a5f8a3f1fe2af2246.tar.bz2 upstream-0f068e7c4a83bcbf20c4e52a5f8a3f1fe2af2246.zip | |
ramips: add support for Netgear WAX202
Netgear WAX202 is an 802.11ax (Wi-Fi 6) router.
Specifications:
* SoC: MT7621A
* RAM: 512 MiB NT5CC256M16ER-EK
* Flash: NAND 128 MiB F59L1G81MB-25T
* Wi-Fi:
* MT7915D: 2.4/5 GHz (DBDC)
* Ethernet: 4x 1GbE
* Switch: SoC built-in
* USB: None
* UART: 115200 baud (labeled on board)
Load addresses (same as ipTIME AX2004M):
* stock
* 0x80010000: FIT image
* 0x81001000: kernel image -> entry
* OpenWrt
* 0x80010000: FIT image
* 0x82000000: uncompressed kernel+relocate image
* 0x80001000: relocated kernel image -> entry
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
* Note that the bootloader accepts both encrypted and unencrypted
images, while the stock web interface only accepts encrypted ones.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References in WAX202 GPL source:
https://www.downloads.netgear.com/files/GPL/WAX202_V1.0.5.1_Source.rar
* openwrt/target/linux/ramips/dts/mt7621-ax-nand-wax202.dts
DTS file for this device.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files')
4 files changed, 18 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 0caa23feac..4b912283e1 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -116,6 +116,12 @@ netgear,r7450) ucidef_set_led_netdev "lan3" "LAN3" "white:lan3" "lan3" ucidef_set_led_netdev "lan4" "LAN4" "white:lan4" "lan4" ;; +netgear,wax202) + ucidef_set_led_netdev "internet" "Internet" "green:net" "wan" + ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1" + ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2" + ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3" + ;; oraybox,x3a) ucidef_set_led_netdev "wan" "wan link" "red:status" "wan" ucidef_set_led_netdev "lan" "lan link" "green:status" "br-lan" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 8abee198a5..39e095584d 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -27,6 +27,7 @@ ramips_setup_interfaces() ampedwireless,ally-r1900k|\ gehua,ghl-r-001|\ hiwifi,hc5962|\ + netgear,wax202|\ xiaomi,mi-router-3-pro|\ xiaomi,mi-router-ac2100|\ xiaomi,mi-router-cr6606|\ @@ -197,6 +198,11 @@ ramips_setup_macs() wan_mac=$label_mac lan_mac=$(macaddr_add $label_mac 1) ;; + netgear,wax202) + lan_mac=$(mtd_get_mac_ascii Config mac) + wan_mac=$(macaddr_add "$lan_mac" 1) + label_mac=$lan_mac + ;; raisecom,msg1500-x-00) lan_mac=$(mtd_get_mac_ascii Config protest_lan_mac) wan_mac=$(mtd_get_mac_ascii Config protest_wan_mac) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 3390104e80..4649b9e9d0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -76,6 +76,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + netgear,wax202) + hw_mac_addr=$(mtd_get_mac_ascii Config mac) + [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress + ;; oraybox,x3a) if [ "$PHYNBR" = "1" ]; then hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 7d44fcf90f..9becffa357 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -84,6 +84,7 @@ platform_do_upgrade() { netgear,r7450|\ netgear,wac104|\ netgear,wac124|\ + netgear,wax202|\ netis,wf2881|\ raisecom,msg1500-x-00|\ sercomm,na502|\ |