diff options
| author | Wenli Looi <wlooi@ucalgary.ca> | 2023-03-30 22:28:23 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-07-01 14:42:11 +0200 |
| commit | 32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756 (patch) | |
| tree | 2c1b5c54d2575389fba07e0c185b7299004a8751 /target/linux/ramips/mt7621/base-files/etc/hotplug.d | |
| parent | 0a1ebccc8702cadc50bc096f1e185472f3927786 (diff) | |
| download | upstream-32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756.tar.gz upstream-32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756.tar.bz2 upstream-32ea8a9a7e4b1319607ae398e9bf7d8e3c4cd756.zip | |
ramips: add support for Netgear EAX12 series
Netgear EAX12, EAX11v2, EAX15v2 are wall-plug 802.11ax (Wi-Fi 6)
extenders that share the SoC, WiFi chip, and image format with the
WAX202.
Specifications:
* MT7621, 256 MiB RAM, 128 MiB NAND
* MT7915: 2.4/5 GHz 2x2 802.11ax (DBDC)
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
All LEDs and buttons appear to work without state_default.
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz
* target/linux/ramips/dts/mt7621-rfb-ax-nand.dts
DTS file for this device.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc/hotplug.d')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 80c72735430..b36ac028b0f 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -118,6 +118,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + netgear,eax12) + hw_mac_addr=$(mtd_get_mac_ascii Config mac) + [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress + ;; netgear,wax202) hw_mac_addr=$(mtd_get_mac_ascii Config mac) [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress |