diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-11-12 01:23:07 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-17 18:41:48 +0200 |
| commit | a4e9c8f14b63cd44300ed452312c03a69aae9ca1 (patch) | |
| tree | 0b3a77ff42a5e42b489913ac9e0e461a4d12c119 /target/linux/ramips/mt7620/base-files | |
| parent | 46674723e1a44785b7638a7a1069139312c08bc2 (diff) | |
| download | upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.gz upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.bz2 upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.zip | |
ramips: add support for netis WF2770
netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100/1000Mbps
- Switch: MT7530BU
- UART:
- J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1
MAC addresses in factory partition:
0x0004: LAN, WiFi 2.4GHz (label_mac-6)
0x0028: not used (label_mac-1)
0x002e: WAN (label_mac)
0x8004: WiFi 5GHz (label_mac+2)
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7620/base-files')
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 20932f60e9..c1dbf8d71d 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -170,6 +170,7 @@ ramips_setup_interfaces() "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0" ;; linksys,e1700|\ + netis,wf2770|\ ralink,mt7620a-mt7530-evb) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" @@ -338,6 +339,10 @@ ramips_setup_macs() linksys,e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; + netis,wf2770) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$wan_mac + ;; tplink,archer-c2-v1|\ tplink,archer-c20-v1|\ tplink,archer-c20i|\ |