diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2021-12-18 22:19:06 +0900 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2021-12-29 20:35:57 +0100 |
| commit | 482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1 (patch) | |
| tree | 81512b91147438e09701c96c9763e8dba3d36d3e /target/linux/ramips/mt7620/base-files/etc/board.d | |
| parent | 7ea9936f7f32fd90af1a29775ac3b297d7775db7 (diff) | |
| download | upstream-482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1.tar.gz upstream-482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1.tar.bz2 upstream-482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1.zip | |
ramips: add support for WeVO AIR DUO
WeVO AIR DUO is a 1-bay NAS & 802.11ac (Wi-Fi 5) router, based on
MediaTek MT7620A.
Specifications:
* SoC: MT7620A
* RAM: 64 MiB
* Flash: SPI NOR 16 MiB
* USB & SATA bridge controller: JMicron JMS567
* SATA 6Gb/s: 2.5" drive slot
* USB 3.0: Micro-B
* USB 2.0: connected to SoC
* Wi-Fi:
* 2.4 GHz: SoC built-in
* 5 GHz: MT7612EN
* Ethernet: 5x 1GbE
* Switch: MT7530WU
* UART: 4-pin 1.27 mm pitch through-hole (57600 baud)
* Pinout: (3V3)|(RXD) (TXD) (GND)
Notes:
* The drive is accessible through the external USB port only when the
router is turned off.
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
The image filename should have ".upload" extension.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7620/base-files/etc/board.d')
| -rw-r--r-- | target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index a00f168672..a64891f94a 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -186,7 +186,8 @@ ramips_setup_interfaces() ;; linksys,e1700|\ netis,wf2770|\ - ralink,mt7620a-mt7530-evb) + ralink,mt7620a-mt7530-evb|\ + wevo,air-duo) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" ucidef_add_switch "switch1" \ @@ -350,6 +351,7 @@ ramips_setup_macs() lenovo,newifi-y1s|\ ohyeah,oy-0001|\ wavlink,wl-wn530hg4|\ + wevo,air-duo|\ youku,yk-l1|\ youku,yk-l1c) wan_mac=$(mtd_get_mac_binary factory 0x2e) |