diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2020-04-17 22:31:11 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-09 20:02:17 +0200 |
| commit | 426fb8cf84ae19b0edc2ed06f7a595bc7b1ed212 (patch) | |
| tree | 38349f224413534aff2485e2615985162288aaf6 /target/linux/ramips/mt7620/base-files/etc/board.d | |
| parent | a8a1ef856871dc8403ea9c0a3bb347c7120b0e65 (diff) | |
| download | upstream-426fb8cf84ae19b0edc2ed06f7a595bc7b1ed212.tar.gz upstream-426fb8cf84ae19b0edc2ed06f7a595bc7b1ed212.tar.bz2 upstream-426fb8cf84ae19b0edc2ed06f7a595bc7b1ed212.zip | |
ramips: add support for LB-Link BL-W1200
The BL-W1200 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7612E)
- 5x 10/100/1000 Mbps Ethernet (MT7530)
- 2x external, non-detachable antennas (Wifi 2.4G/5G)
- 1x USB 2.0
- UART (R2) on PCB (57600 8n1)
- 9x LED (1 GPIO controlled), 1x button
- u-Boot bootloader
Known issues:
- No status LED. Used WPS LED during boot/failsafe/sysupgrade.
Installation:
1. Apply initramfs image via factory web-gui.
2. Install sysupgrade image.
How to revert to OEM firmware:
- sysupgrade -n -F stock_firmware.bin
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7620/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches | 3 |
2 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 8ae50b3df5..3f306d8506 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -116,6 +116,7 @@ ramips_setup_interfaces() "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0" ;; edimax,br-6478ac-v2|\ + lb-link,bl-w1200|\ tplink,archer-c2-v1) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" @@ -319,6 +320,10 @@ ramips_setup_macs() iptime,a104ns) wan_mac=$(macaddr_add "$(mtd_get_mac_binary u-boot 0x1fc20)" 2) ;; + lb-link,bl-w1200) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$wan_mac + ;; lenovo,newifi-y1|\ lenovo,newifi-y1s|\ ohyeah,oy-0001|\ diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index f2355fdb97..959991598c 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -22,6 +22,9 @@ head-weblink,hdrm200) ucidef_add_gpio_switch "io4" "I/O 4" "14" ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "21" "1" ;; +lb-link,bl-w1200) + ucidef_add_gpio_switch "eth_leds_enable" "ETH LEDs enable" "10" "1" + ;; zbtlink,zbt-we826-e) ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "13" ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "14" "1" |