aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image/mt7621.mk
diff options
context:
space:
mode:
authorMateus B. Cassiano <mbc07@live.com>2020-07-15 17:45:39 -0400
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-07-16 18:40:20 +0200
commit73e8f23579bcb87764dae9ed0aefe28be3183d3e (patch)
tree9b7ad1706ff8007d19020e87b69e794adb6588eb /target/linux/ramips/image/mt7621.mk
parented087cba8a8e41f76f9487caa34eff926ea8a065 (diff)
downloadupstream-73e8f23579bcb87764dae9ed0aefe28be3183d3e.tar.gz
upstream-73e8f23579bcb87764dae9ed0aefe28be3183d3e.tar.bz2
upstream-73e8f23579bcb87764dae9ed0aefe28be3183d3e.zip
ramips: add support for D-Link DIR-867/DIR-882 A1
This patch adds support for D-Link DIR-867 A1 and D-Link DIR-882 A1. Given the similarity of these devices, this patch also introduces a common DTS shared between DIR-867 A1, DIR-878 A1 and DIR-882 A1. Specifications: * Board: AP-MTKH7-0002 * SoC: MediaTek MT7621AT * RAM: 128 MB (DDR3) * Flash: 16 MB (SPI NOR) * WiFi: MediaTek MT7615N (x2) * Switch: 1 WAN, 4 LAN (Gigabit) * Ports: 1 USB 2.0, 1 USB 3.0 * Buttons: Reset, WiFi Toggle, WPS * LEDs: Power (green/orange), Internet (green/orange), WiFi 2.4G (green), WiFi 5G (green), USB 2.0 (green), USB 3.0 (green) Notes: * WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips * DIR-867 wireless chips are limited to 3x3 streams at hardware level * USB ports and related LEDs available only on DIR-882 Serial port: * Parameters: 57600, 8N1 * Location: J1 header (close to the Reset, WiFi and WPS buttons) * Pinout: 1 - VCC 2 - RXD 3 - TXD 4 - GND Installation: * D-Link Recovery GUI: power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the power LED starts flashing orange, manually assign a static IP address under the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1 * Some modern browsers may have problems flashing via the Recovery GUI, if that occurs consider uploading the firmware through cURL: curl -v -i -F "firmware=@file.bin" 192.168.0.1 Signed-off-by: Mateus B. Cassiano <mbc07@live.com> [move DEVICE_VARIANT to individual definitions] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/image/mt7621.mk')
-rw-r--r--target/linux/ramips/image/mt7621.mk37
1 files changed, 28 insertions, 9 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index e97d2315f1..0315822c0b 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -220,6 +220,18 @@ define Device/buffalo_wsr-600dhp
endef
TARGET_DEVICES += buffalo_wsr-600dhp
+define Device/dlink_dir-8xx-a1
+ IMAGE_SIZE := 16000k
+ DEVICE_VENDOR := D-Link
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic
+ KERNEL_INITRAMFS := $$(KERNEL) | uimage-padhdr 96
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
+ pad-rootfs | append-metadata | check-size
+ IMAGE/factory.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
+ check-size
+endef
+
define Device/dlink_dir-860l-b1
$(Device/seama)
BLOCKSIZE := 64k
@@ -236,21 +248,28 @@ define Device/dlink_dir-860l-b1
endef
TARGET_DEVICES += dlink_dir-860l-b1
+define Device/dlink_dir-867-a1
+ $(Device/dlink_dir-8xx-a1)
+ DEVICE_MODEL := DIR-867
+ DEVICE_VARIANT := A1
+endef
+TARGET_DEVICES += dlink_dir-867-a1
+
define Device/dlink_dir-878-a1
- IMAGE_SIZE := 16000k
- DEVICE_VENDOR := D-Link
+ $(Device/dlink_dir-8xx-a1)
DEVICE_MODEL := DIR-878
DEVICE_VARIANT := A1
- DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware wpad-basic
- KERNEL_INITRAMFS := $$(KERNEL) | uimage-padhdr 96
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
- pad-rootfs | append-metadata | check-size
- IMAGE/factory.bin := append-kernel | append-rootfs | uimage-padhdr 96 |\
- check-size
endef
TARGET_DEVICES += dlink_dir-878-a1
+define Device/dlink_dir-882-a1
+ $(Device/dlink_dir-8xx-a1)
+ DEVICE_MODEL := DIR-882
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += dlink_dir-882-a1
+
define Device/d-team_newifi-d2
$(Device/uimage-lzma-loader)
IMAGE_SIZE := 32448k