aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/files-4.14
diff options
context:
space:
mode:
authorBirger Koblitz <mail@birger-koblitz.de>2019-06-03 22:04:12 +0200
committerPetr Štetiar <ynezz@true.cz>2019-06-20 08:31:24 +0200
commit88f7a29f99fb8209f6d7100d0cc0f7af6dba89cf (patch)
tree62d28e5d770a400c3f482c068885f1b57f5506a6 /target/linux/ramips/files-4.14
parent080ba31eec2ff4c165ce5a1bb9d434ddd91bdb6b (diff)
downloadupstream-88f7a29f99fb8209f6d7100d0cc0f7af6dba89cf.tar.gz
upstream-88f7a29f99fb8209f6d7100d0cc0f7af6dba89cf.tar.bz2
upstream-88f7a29f99fb8209f6d7100d0cc0f7af6dba89cf.zip
ramips: add support for Edimax EW-7476RPC / EW-7478AC
SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: 192.168.9.2/24). http://192.168.9.2/index.asp ramips: add Edimax EW-7478AC SoC: MediaTek MT7620a @ 580MHz RAM: 64M (Winbond W9751G6KB-25) FLASH: 8MB (Macronix) WiFi: SoC-integrated: MediaTek MT7620a bgn WiFi: MediaTek MT7612EN nac GbE: 1x (RTL8211E) BTN: WPS - RFKILL/RF 50%/RF 100% toggle LED: - Wifi 5g (blue) - Wifi 2g (blue) - Crossband (green) - Power (green) - WPS (green) - LAN (Green) UART: UART is present as Pads with throughholes on the PCB. They are located next to the switch for the wifi configuration 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the web-interfaces (by default: http://edimaxext.setup) Or push wpa button on power on and send firmware via tftp to 192.168.1.6 The EW-7478AC is identical to the EW-7476RPC, except instead of 2 internal antennas it has 2 external ones. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [merge conflict in 01_leds] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/files-4.14')
-rw-r--r--target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c34
1 files changed, 34 insertions, 0 deletions
diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b2c3d32c55..65aa7f3260 100644
--- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -32,6 +32,9 @@
#include <linux/bug.h>
#include <linux/netfilter.h>
#include <net/netfilter/nf_flow_table.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <asm/mach-ralink/ralink_regs.h>
@@ -1333,6 +1336,35 @@ static int fe_stop(struct net_device *dev)
return 0;
}
+static void fe_reset_phy(struct fe_priv *priv)
+{
+ int err, msec = 30;
+ struct gpio_desc *phy_reset;
+
+ phy_reset = devm_gpiod_get_optional(priv->dev, "phy-reset",
+ GPIOD_OUT_HIGH);
+ if (!phy_reset)
+ return;
+
+ if (IS_ERR(phy_reset)) {
+ dev_err(priv->dev, "Error acquiring reset gpio pins: %ld\n",
+ PTR_ERR(phy_reset));
+ return;
+ }
+
+ err = of_property_read_u32(priv->dev->of_node, "phy-reset-duration",
+ &msec);
+ if (!err && msec > 1000)
+ msec = 30;
+
+ if (msec > 20)
+ msleep(msec);
+ else
+ usleep_range(msec * 1000, msec * 1000 + 1000);
+
+ gpiod_set_value(phy_reset, 0);
+}
+
static int __init fe_init(struct net_device *dev)
{
struct fe_priv *priv = netdev_priv(dev);
@@ -1348,6 +1380,8 @@ static int __init fe_init(struct net_device *dev)
return -ENODEV;
}
+ fe_reset_phy(priv);
+
mac_addr = of_get_mac_address(priv->dev->of_node);
if (mac_addr)
ether_addr_copy(dev->dev_addr, mac_addr);