diff options
| author | James McGuire <jamesm51@gmail.com> | 2020-11-04 21:13:19 -0800 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-11-11 17:35:10 +0100 |
| commit | de768829a5c6cd1c7889ba25c50db07827cfc96c (patch) | |
| tree | c60c0083d7c8eea89e55f74b2d0f5713709f6c81 /target/linux/ramips/dts | |
| parent | c02096361c671351dc05733cdd47f3da71de47e7 (diff) | |
| download | upstream-de768829a5c6cd1c7889ba25c50db07827cfc96c.tar.gz upstream-de768829a5c6cd1c7889ba25c50db07827cfc96c.tar.bz2 upstream-de768829a5c6cd1c7889ba25c50db07827cfc96c.zip | |
ramips: add support for D-Link DIR-2640 A1
This patch adds support for D-Link DIR-2640 A1.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 2.0, 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (blue/orange), Internet (blue/orange), WiFi 2.4G (blue),
WiFi 5G (blue), USB 3.0 (blue), USB 2.0 (blue)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
MAC addresses:
lan factory 0xe000 *:a7 (label)
wan factory 0xe006 *:aa
2.4 factory 0xe000 +1 *:a8
5.0 factory 0xe000 +2 *:a9
Seems like vendor didn't replace the dummy entries in the calibration data.
Signed-off-by: James McGuire <jamesm51@gmail.com>
[fix device definition title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_dlink_dir-2640-a1.dts | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-2640-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-2640-a1.dts new file mode 100644 index 0000000000..323a790600 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dir-2640-a1.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dir-xx60-a1.dtsi" + +/ { + compatible = "dlink,dir-2640-a1", "mediatek,mt7621-soc"; + model = "D-Link DIR-2640 A1"; +}; + +&leds { + usb2_white { + label = "white:usb2"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + + usb3_white { + label = "white:usb3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>; + linux,default-trigger = "usbport"; + }; +}; + +&wifi0 { + mtd-mac-address = <&factory 0xe000>; + mtd-mac-address-increment = <1>; +}; + +&wifi1 { + mtd-mac-address = <&factory 0xe000>; + mtd-mac-address-increment = <2>; +}; |