diff options
| author | Rani Hod <rani.hod@gmail.com> | 2023-04-25 01:26:28 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-08-27 19:13:36 +0200 |
| commit | a4eb1ea3319296d99d36be8c4d786f4e3ee6acb9 (patch) | |
| tree | 953c3c5cae29bafa48e8f0aa07f8f8fbc2446d5b /target/linux/ramips/dts | |
| parent | e80a3875172178cdcc02d13826717413cc1534a8 (diff) | |
| download | upstream-a4eb1ea3319296d99d36be8c4d786f4e3ee6acb9.tar.gz upstream-a4eb1ea3319296d99d36be8c4d786f4e3ee6acb9.tar.bz2 upstream-a4eb1ea3319296d99d36be8c4d786f4e3ee6acb9.zip | |
ramips: add support for D-Link DRA-1360
The DRA-1360 rev A is a wall-plug AC1300 repeater.
Hardware is identical (same FCC ID, black case instead of white)
to D-Link DAP-1620 rev B, which is already supported, but a
different model name, revision, and hardware ID are needed.
Thus, the bulk of the DAP-1620 device tree is extracted to a
common dtsi included by the two models' device trees.
Repeating specs and installation instructions from e4c7703:
(note that the RAM size mentioned there was incorrect, oops)
Specs:
- SoC: MT7621AT (880MHz dual-core MIPS1004Kc)
- Memory: 128 MiB RAM, 16 MiB NOR SPI
- WiFi: MT7615DN 2x2 802.11n + 2x2 802.11ac (DBDC)
- Ethernet: 1 RJ45 port 10/100/1000
- Power/status LED: red+green
- LED RSSI bargraph: 2x green, 1x red+green
Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
(pings are ignored, it listens only for http)
- Upload factory.bin, confirm flashing
(seems to work best with Chromium-based browsers)
Revert to OEM firmware:
- tail -c+117 DRA1360A1_FW112B03.bin | \
openssl aes-256-cbc -d -md md5 -out decrypted.bin \
-k c471706398cb147c6619f8a04a18d53e9c17ede8
- flash decrypted.bin via D-Link Web Recovery
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Diffstat (limited to 'target/linux/ramips/dts')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts | 152 | ||||
| -rw-r--r-- | target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts | 8 | ||||
| -rw-r--r-- | target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi | 154 |
3 files changed, 163 insertions, 151 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts index 919e5be4b9c..5005eb1a724 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts +++ b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts @@ -1,158 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "mt7621_dlink_dxx-1xx0-x1.dtsi" / { compatible = "dlink,dap-1620-b1", "mediatek,mt7621-soc"; model = "D-Link DAP-1620 B1"; - - aliases { - label-mac-device = &gmac0; - - led-boot = &led_status_red; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - }; - - wps { - label = "wps"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: status_red { - label = "red:status"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - led_status_green: status_green { - label = "green:status"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - rssi_low_red { - label = "red:rssilow"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - - rssi_low_green { - label = "green:rssilow"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - - rssi_med_green { - label = "green:rssimed"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - }; - - rssi_high_green { - label = "green:rssihigh"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_e000: macaddr@e000 { - reg = <0xe000 0x6>; - }; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x0>; - /* The correct MAC addresses are set in 10_fix_wifi_mac. */ - }; }; - -&gmac0 { - nvmem-cells = <&macaddr_factory_e000>; - nvmem-cell-names = "mac-address"; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan"; - }; - }; -}; - -ðernet { - pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; -}; - -&state_default { - gpio { - groups = "uart3", "jtag", "wdt"; - function = "gpio"; - }; -}; - diff --git a/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts new file mode 100644 index 00000000000..294093b6ff1 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dxx-1xx0-x1.dtsi" + +/ { + compatible = "dlink,dra-1360-a1", "mediatek,mt7621-soc"; + model = "D-Link DRA-1360 A1"; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi new file mode 100644 index 00000000000..8fb6de7c480 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + label-mac-device = &gmac0; + + led-boot = &led_status_red; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + rssi_low_red { + label = "red:rssilow"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + rssi_low_green { + label = "green:rssilow"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + + rssi_med_green { + label = "green:rssimed"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + rssi_high_green { + label = "green:rssihigh"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + /* The correct MAC addresses are set in 10_fix_wifi_mac. */ + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&state_default { + gpio { + groups = "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; |
